git.osdn.net Git - qmiga/qemu.git/log

rx: Rename QOM type check macros

Currently we have a RXCPU typedef and a RXCPU type checking
macro, but OBJECT_DECLARE* would transform the RXCPU macro into a
function, and the function name would conflict with the typedef
name.

Rename the RXCPU* QOM type check macros to RX_CPU*, so we will
avoid the conflict and make the macro names consistent with the
TYPE_RX_CPU constant name.

This will make future conversion to OBJECT_DECLARE* easier.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-53-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

arm: Fix typo in AARCH64_CPU_GET_CLASS definition

There's a typo in the type name of AARCH64_CPU_GET_CLASS. This
was never detected because the macro is not used by any code.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-52-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

rdma: Rename INTERFACE_RDMA_PROVIDER_CLASS macro

Rename the macro to be consistent with RDMA_PROVIDER and
RDMA_PROVIDER_GET_CLASS.

This will make future conversion to OBJECT_DECLARE* easier.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-48-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

x86-iommu: Rename QOM type macros

Some QOM macros were using a X86_IOMMU_DEVICE prefix, and others
were using a X86_IOMMU prefix. Rename all of them to use the
same X86_IOMMU_DEVICE prefix.

This will make future conversion to OBJECT_DECLARE* easier.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-47-ehabkost@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

mos6522: Rename QOM macros

Rename the MOS6522_DEVICE_CLASS and MOS6522_DEVICE_GET_CLASS
macros to be consistent with the TYPE_MOS6522 and MOS6522 macros.

This will make future conversion to OBJECT_DECLARE* easier.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-46-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

imx_ccm: Rename IMX_GET_CLASS macro

Rename it to IMX_CCM_GET_CLASS to be consistent with the existing
IMX_CCM and IXM_CCM_CLASS macro.

This will make future conversion to OBJECT_DECLARE* easier.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-45-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200901' into staging

target-arm queue:
* Implement fp16 support for AArch32 VFP and Neon
* hw/arm/sbsa-ref: add "reg" property to DT cpu nodes
* hw/arm/sbsa-ref : Add embedded controller in secure memory

# gpg: Signature made Tue 01 Sep 2020 16:17:23 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200901: (47 commits)
  hw/arm/sbsa-ref : Add embedded controller in secure memory
  hw/misc/sbsa_ec : Add an embedded controller for sbsa-ref
  hw/arm/sbsa-ref: add "reg" property to DT cpu nodes
  target/arm: Enable FP16 in '-cpu max'
  target/arm: Implement fp16 for Neon VMUL, VMLA, VMLS
  target/arm/vec_helper: Add gvec fp indexed multiply-and-add operations
  target/arm/vec_helper: Handle oprsz less than 16 bytes in indexed operations
  target/arm: Implement fp16 for Neon VRINTX
  target/arm: Implement fp16 for Neon VRINT-with-specified-rounding-mode
  target/arm: Implement fp16 for Neon VCVT with rounding modes
  target/arm: Implement fp16 for Neon VCVT fixed-point
  target/arm: Convert Neon VCVT fixed-point to gvec
  target/arm: Implement fp16 for Neon float-integer VCVT
  target/arm: Implement fp16 for Neon pairwise fp ops
  target/arm: Implement fp16 for Neon VRSQRTS
  target/arm: Implement fp16 for Neon VRECPS
  target/arm: Implement fp16 for Neon fp compare-vs-0
  target/arm: Implement fp16 for Neon VFMA, VMFS
  target/arm: Implement fp16 for Neon VMLA, VMLS operations
  target/arm: Implement fp16 for Neon VMAXNM, VMINNM
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

Pull request trivial patches 20200901

# gpg: Signature made Tue 01 Sep 2020 15:08:59 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: (44 commits)
  docs/system: Fix grammar in documentation
  main-loop: Fix comment
  hw/display/vga:Remove redundant statement in vga_draw_graphic()
  hw/intc: fix default registers value in exynos4210_combiner_read()
  usb/bus: Remove dead assignment in usb_get_fw_dev_path()
  vfio/platform: Remove dead assignment in vfio_intp_interrupt()
  hw/net/virtio-net:Remove redundant statement in virtio_net_rsc_tcp_ctrl_check()
  hw/virtio/vhost-user:Remove dead assignment in scrub_shadow_regions()
  target/arm/translate-a64:Remove redundant statement in disas_simd_two_reg_misc_fp16()
  target/arm/translate-a64:Remove dead assignment in handle_scalar_simd_shli()
  hw/arm/omap1:Remove redundant statement in omap_clkdsp_read()
  hw/arm/virt-acpi-build:Remove dead assignment in build_madt()
  linux-user: Add strace support for printing OFD fcntl operations
  util/vfio-helpers: Unify trace-events size format
  hw/net/xilinx_axienet: Remove unused code
  hw/scsi/scsi-disk: Replace magic '512' value by BDRV_SECTOR_SIZE
  hw/ide/pci: Replace magic '512' value by BDRV_SECTOR_SIZE
  hw/ide/atapi: Replace magic '512' value by BDRV_SECTOR_SIZE
  hw/ide/ahci: Replace magic '512' value by BDRV_SECTOR_SIZE
  hw/ide/core: Trivial typo fix
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/sbsa-ref : Add embedded controller in secure memory

Add the previously created sbsa-ec device to the sbsa-ref machine in
secure memory so the PSCI implementation in ARM-TF can access it, but
not expose it to non secure firmware or OS except by via ARM-TF.

Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Tested-by: Leif Lindholm <leif@nuviainc.com>
Message-id: 20200826141952.136164-3-graeme@nuviainc.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/misc/sbsa_ec : Add an embedded controller for sbsa-ref

A difference between sbsa platform and the virt platform is PSCI is
handled by ARM-TF in the sbsa platform. This means that the PSCI code
there needs to communicate some of the platform power changes down
to the qemu code for things like shutdown/reset control.

Space has been left to extend the EC if we find other use cases in
future where ARM-TF and qemu need to communicate.

Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Tested-by: Leif Lindholm <leif@nuviainc.com>
Message-id: 20200826141952.136164-2-graeme@nuviainc.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/sbsa-ref: add "reg" property to DT cpu nodes

The sbsa-ref platform uses a minimal device tree to pass amount of memory
as well as number of cpus to the firmware. However, when dumping that
minimal dtb (with -M sbsa-virt,dumpdtb=<file>), the resulting blob
generates a warning when decompiled by dtc due to lack of reg property.

Add a simple reg property per cpu, representing a 64-bit MPIDR_EL1.

This also ends up being cleaner than having the firmware calculating its
own IDs for generating APCI.

Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200827124335.30586-1-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Enable FP16 in '-cpu max'

Set the MVFR1 ID register FPHP and SIMDHP fields to indicate
that our "-cpu max" has v8.2-FP16.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-46-peter.maydell@linaro.org

target/arm: Implement fp16 for Neon VMUL, VMLA, VMLS

Convert the Neon floating-point VMUL, VMLA and VMLS to use gvec,
and use this to implement fp16 support.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-45-peter.maydell@linaro.org

target/arm/vec_helper: Add gvec fp indexed multiply-and-add operations

Add gvec helpers for doing Neon-style indexed non-fused fp
multiply-and-accumulate operations.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200828183354.27913-44-peter.maydell@linaro.org

target/arm/vec_helper: Handle oprsz less than 16 bytes in indexed operations

In the gvec helper functions for indexed operations, for AArch32
Neon the oprsz (total size of the vector) can be less than 16 bytes
if the operation is on a D reg. Since the inner loop in these
helpers always goes from 0 to segment, we must clamp it based
on oprsz to avoid processing a full 16 byte segment when asked to
handle an 8 byte wide vector.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-43-peter.maydell@linaro.org

target/arm: Implement fp16 for Neon VRINTX

Convert the Neon VRINTX insn to use gvec, and use this to implement
fp16 support for it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-42-peter.maydell@linaro.org

target/arm: Implement fp16 for Neon VRINT-with-specified-rounding-mode

Convert the Neon VRINT-with-specified-rounding-mode insns to gvec,
and use this to implement the fp16 versions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-41-peter.maydell@linaro.org

target/arm: Implement fp16 for Neon VCVT with rounding modes

Convert the Neon VCVT with-specified-rounding-mode instructions
to gvec, and use this to implement fp16 support for them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-40-peter.maydell@linaro.org

target/arm: Implement fp16 for Neon VCVT fixed-point

Implement fp16 for the Neon VCVT insns which convert between
float and fixed-point.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-39-peter.maydell@linaro.org

target/arm: Convert Neon VCVT fixed-point to gvec

Convert the Neon VCVT float<->fixed-point insns to a
gvec style, in preparation for adding fp16 support.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-38-peter.maydell@linaro.org

target/arm: Implement fp16 for Neon float-integer VCVT

Convert the Neon float-integer VCVT insns to gvec, and use this
to implement fp16 support for them.

Note that unlike the VFP int<->fp16 VCVT insns we converted
earlier and which convert to/from a 32-bit integer, these
Neon insns convert to/from 16-bit integers. So we can use
the existing vfp conversion helpers for the f32<->u32/i32
case but need to provide our own for f16<->u16/i16.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-37-peter.maydell@linaro.org

target/arm: Implement fp16 for Neon pairwise fp ops

Convert the Neon pairwise fp ops to use a single gvic-style
helper to do the full operation instead of one helper call
for each 32-bit part. This allows us to use the same
framework to implement the fp16.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-36-peter.maydell@linaro.org

target/arm: Implement fp16 for Neon VRSQRTS

Convert the Neon VRSQRTS insn to using a gvec helper,
and use this to implement the fp16 case.

As with VRECPS, we adjust the phrasing of the new implementation
slightly so that the fp32 version parallels the fp16 one.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-35-peter.maydell@linaro.org

target/arm: Implement fp16 for Neon VRECPS

Convert the Neon VRECPS insn to using a gvec helper, and
use this to implement the fp16 case.

The phrasing of the new float32_recps_nf() is slightly different from
the old recps_f32() so that it parallels the f16 version; for f16 we
can't assume that flush-to-zero is always enabled.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-34-peter.maydell@linaro.org

target/arm: Implement fp16 for Neon fp compare-vs-0

Convert the neon floating-point vector compare-vs-0 insns VCEQ0,
VCGT0, VCLE0, VCGE0 and VCLT0 to use a gvec helper, and use this to
implement the fp16 case.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-33-peter.maydell@linaro.org

target/arm: Implement fp16 for Neon VFMA, VMFS

Convert the neon floating-point vector operations VFMA and VFMS
to use a gvec helper, and use this to implement the fp16 case.

This is the last use of do_3same_fp() so we can now delete
that function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-32-peter.maydell@linaro.org

target/arm: Implement fp16 for Neon VMLA, VMLS operations

Convert the Neon floating-point VMLA and VMLS insns over to using a
gvec helper, and use this to implement the fp16 case.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-31-peter.maydell@linaro.org

target/arm: Implement fp16 for Neon VMAXNM, VMINNM

Convert the Neon floating point VMAXNM and VMINNM insns to
using a gvec helper and use this to implement the fp16 case.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-30-peter.maydell@linaro.org

target/arm: Implement fp16 for Neon VMAX, VMIN

Convert the Neon float-point VMAX and VMIN insns over to using
a gvec helper, and use this to implement the fp16 case.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-29-peter.maydell@linaro.org

target/arm: Implement fp16 for VACGE, VACGT

Convert the neon floating-point vector absolute comparison ops
VACGE and VACGT over to using a gvec hepler and use this to
implement the fp16 case.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-28-peter.maydell@linaro.org

target/arm: Implement fp16 for VCEQ, VCGE, VCGT comparisons

Convert the Neon floating-point vector comparison ops VCEQ,
VCGE and VCGT over to using a gvec helper and use this to
implement the fp16 case.

(We put the float16_ceq() etc functions above the DO_2OP()
macro definition because later when we convert the
compare-against-zero instructions we'll want their
definitions to be visible at that point in the source file.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-27-peter.maydell@linaro.org

target/arm: Implement fp16 for Neon VABS, VNEG of floats

Rewrite Neon VABS/VNEG of floats to use gvec logical AND and XOR, so
that we can implement the fp16 version of the insns.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-26-peter.maydell@linaro.org

target/arm: Implement fp16 for Neon VRECPE, VRSQRTE using gvec

We already have gvec helpers for floating point VRECPE and
VRQSRTE, so convert the Neon decoder to use them and
add the fp16 support.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-25-peter.maydell@linaro.org

target/arm: Implement FP16 for Neon VADD, VSUB, VABD, VMUL

Implement FP16 support for the Neon insns which use the DO_3S_FP_GVEC
macro: VADD, VSUB, VABD, VMUL.

For VABD this requires us to implement a new gvec_fabd_h helper
using the machinery we have already for the other helpers.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-24-peter.maydell@linaro.org

target/arm: Implement VFP fp16 VMOV between gp and halfprec registers

Implement the VFP fp16 variant of VMOV that transfers a 16-bit
value between a general purpose register and a VFP register.

Note that Rt == 15 is UNPREDICTABLE; since this insn is v8 and later
only we have no need to replicate the old "updates CPSR.NZCV"
behaviour that the singleprec version of this insn does.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-22-peter.maydell@linaro.org

target/arm: Implement new VFP fp16 insn VMOVX

The fp16 extension includes a new instruction VMOVX, which copies the
upper 16 bits of a 32-bit source VFP register into the lower 16
bits of the destination and zeroes the high half of the destination.
Implement it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-21-peter.maydell@linaro.org

target/arm: Implement new VFP fp16 insn VINS

The fp16 extension includes a new instruction VINS, which copies the
lower 16 bits of a 32-bit source VFP register into the upper 16 bits
of the destination. Implement it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-20-peter.maydell@linaro.org

target/arm: Implement VFP fp16 VRINT*

Implement the fp16 version of the VFP VRINT* insns.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-19-peter.maydell@linaro.org

target/arm: Implement VFP fp16 VSEL

Implement the fp16 versions of the VFP VSEL instruction.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-18-peter.maydell@linaro.org

target/arm: Implement VFP vp16 VCVT-with-specified-rounding-mode

Implement the fp16 versions of the VFP VCVT instruction forms
which convert between floating point and integer with a specified
rounding mode.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-17-peter.maydell@linaro.org

target/arm: Implement VFP fp16 VCVT between float and fixed-point

Implement the fp16 versions of the VFP VCVT instruction forms which
convert between floating point and fixed-point.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-16-peter.maydell@linaro.org

target/arm: Use macros instead of open-coding fp16 conversion helpers

Now the VFP_CONV_FIX macros can handle fp16's distinction between the
width of the operation and the width of the type used to pass operands,
use the macros rather than the open-coded functions.

This creates an extra six helper functions, all of which we are going
to need for the AArch32 VFP fp16 instructions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-15-peter.maydell@linaro.org

target/arm: Make VFP_CONV_FIX macros take separate float type and float size

Currently the VFP_CONV_FIX macros take a single fsz argument for the
size of the float type, which is used both to select the name of
the functions to call (eg float32_is_any_nan()) and also for the
type to use for the float inputs and outputs (eg float32).

Separate these into fsz and ftype arguments, so that we can use them
for fp16, which uses 'float16' in the function names but is still
passing inputs and outputs in a 32-bit sized type.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-14-peter.maydell@linaro.org

target/arm: Implement VFP fp16 VCVT between float and integer

Implement the fp16 versions of the VFP VCVT instruction forms which
convert between floating point and integer.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-13-peter.maydell@linaro.org

target/arm: Implement VFP fp16 VLDR and VSTR

Implement the fp16 versions of the VFP VLDR/VSTR (immediate).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-12-peter.maydell@linaro.org

target/arm: Implement VFP fp16 VCMP

Implement fp16 version of VCMP.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-11-peter.maydell@linaro.org

target/arm: Implement VFP fp16 for VMOV immediate

Implement VFP fp16 support for the VMOV immediate insn.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-10-peter.maydell@linaro.org

target/arm: Implement VFP fp16 for VABS, VNEG, VSQRT

Implement VFP fp16 for VABS, VNEG and VSQRT. This is all
the fp16 insns that use the DO_VFP_2OP macro, because there
is no fp16 version of VMOV_reg.

Notes:
* the gen_helper_vfp_negh already exists as we needed to create
it for the fp16 multiply-add insns
* as usual we need to use the f16 version of the fp_status;
this is only relevant for VSQRT

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-9-peter.maydell@linaro.org

target/arm: Macroify uses of do_vfp_2op_sp() and do_vfp_2op_dp()

Macroify the uses of do_vfp_2op_sp() and do_vfp_2op_dp(); this will
make it easier to add the halfprec support.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-8-peter.maydell@linaro.org

target/arm: Implement VFP fp16 for fused-multiply-add

Implement VFP fp16 support for fused multiply-add insns
VFNMA, VFNMS, VFMA, VFMS.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-7-peter.maydell@linaro.org

target/arm: Macroify trans functions for VFMA, VFMS, VFNMA, VFNMS

Macroify creation of the trans functions for single and double
precision VFMA, VFMS, VFNMA, VFNMS. The repetition was OK for
two sizes, but we're about to add halfprec and it will get a bit
more than seems reasonable.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-6-peter.maydell@linaro.org

target/arm: Implement VFP fp16 VMLA, VMLS, VNMLS, VNMLA, VNMUL

Implement fp16 versions of the VFP VMLA, VMLS, VNMLS, VNMLA, VNMUL
instructions. (These are all the remaining ones which we implement
via do_vfp_3op_[hsd]p().)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-5-peter.maydell@linaro.org

target/arm: Implement VFP fp16 for VFP_BINOP operations

Implmeent VFP fp16 support for simple binary-operator VFP insns VADD,
VSUB, VMUL, VDIV, VMINNM and VMAXNM:

* make the VFP_BINOP() macro generate float16 helpers as well as
float32 and float64
* implement a do_vfp_3op_hp() function similar to the existing
do_vfp_3op_sp()
* add decode for the half-precision insn patterns

Note that the VFP_BINOP macro use creates a couple of unused helper
functions vfp_maxh and vfp_minh, but they're small so it's not worth
splitting the BINOP operations into "needs halfprec" and "no
halfprec" groups.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-4-peter.maydell@linaro.org

target/arm: Use correct ID register check for aa32_fp16_arith

The aa32_fp16_arith feature check function currently looks at the
AArch64 ID_AA64PFR0 register. This is (as the comment notes) not
correct. The bogus check was put in mostly to allow testing of the
fp16 variants of the VCMLA instructions and it was something of
a mistake that we allowed them to exist in master.

Switch the feature check function to testing VMFR1.FPHP, which is
what it ought to be.

This will remove emulation of the VCMLA and VCADD insns from
AArch32 code running on an AArch64 '-cpu max' using system emulation.
(They were never enabled for aarch32 linux-user and system-emulation.)
Since we weren't advertising their existence via the AArch32 ID
register, well-behaved guests wouldn't have been using them anyway.

Once we have implemented all the AArch32 support for the FP16 extension
we will advertise it in the MVFR1 ID register field, which will reenable
these insns along with all the others.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-3-peter.maydell@linaro.org

target/arm: Remove local definitions of float constants

In several places the target/arm code defines local float constants
for 2, 3 and 1.5, which are also provided by include/fpu/softfloat.h.
Remove the unnecessary local duplicate versions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-2-peter.maydell@linaro.org

docs/system: Fix grammar in documentation

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200827173051.31050-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

main-loop: Fix comment

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200827175520.32355-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/display/vga:Remove redundant statement in vga_draw_graphic()

Clang static code analyzer show warning:
hw/display/vga.c:1677:9: warning: Value stored to 'update' is never read
update = full_update;
^ ~~~~~~~~~~~

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200827110311.164316-11-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/intc: fix default registers value in exynos4210_combiner_read()

Clang static code analyzer show warning:
hw/intc/exynos4210_combiner.c:231:9: warning: Value stored to 'val' is never read
val = s->reg_set[offset >> 2];

The default register return value should be return 'val'.

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827110311.164316-10-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

usb/bus: Remove dead assignment in usb_get_fw_dev_path()

Clang static code analyzer show warning:
qemu/hw/usb/bus.c:615:13: warning: Value stored to 'pos' is never read
pos += snprintf(fw_path + pos, fw_len - pos, "%s@%lx",

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200827110311.164316-9-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

vfio/platform: Remove dead assignment in vfio_intp_interrupt()

Clang static code analyzer show warning:
hw/vfio/platform.c:239:9: warning: Value stored to 'ret' is never read
ret = event_notifier_test_and_clear(intp->interrupt);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200827110311.164316-8-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/net/virtio-net:Remove redundant statement in virtio_net_rsc_tcp_ctrl_check()

Clang static code analyzer show warning:
hw/net/virtio-net.c:2077:5: warning: Value stored to 'tcp_flag' is never read
tcp_flag &= VIRTIO_NET_TCP_FLAG;
^ ~~~~~~~~~~~~~~~~~~~

The 'VIRTIO_NET_TCP_FLAG' is '0x3F'. The last ‘tcp_flag’ assignment statement is
the same as that of the first two statements.

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200827110311.164316-7-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/virtio/vhost-user:Remove dead assignment in scrub_shadow_regions()

Clang static code analyzer show warning:
hw/virtio/vhost-user.c:606:9: warning: Value stored to 'mr' is never read
mr = vhost_user_get_mr_data(reg->userspace_addr, &offset, &fd);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200827110311.164316-6-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/arm/translate-a64:Remove redundant statement in disas_simd_two_reg_misc_fp16()

Clang static code analyzer show warning:
target/arm/translate-a64.c:13007:5: warning: Value stored to 'rd' is never read
    rd = extract32(insn, 0, 5);
    ^    ~~~~~~~~~~~~~~~~~~~~~
target/arm/translate-a64.c:13008:5: warning: Value stored to 'rn' is never read
    rn = extract32(insn, 5, 5);
    ^    ~~~~~~~~~~~~~~~~~~~~~

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827110311.164316-5-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/arm/translate-a64:Remove dead assignment in handle_scalar_simd_shli()

Clang static code analyzer show warning:
target/arm/translate-a64.c:8635:14: warning: Value stored to 'tcg_rn' during its
initialization is never read
    TCGv_i64 tcg_rn = new_tmp_a64(s);
             ^~~~~~   ~~~~~~~~~~~~~~
target/arm/translate-a64.c:8636:14: warning: Value stored to 'tcg_rd' during its
initialization is never read
    TCGv_i64 tcg_rd = new_tmp_a64(s);
             ^~~~~~   ~~~~~~~~~~~~~~

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827110311.164316-4-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/arm/omap1:Remove redundant statement in omap_clkdsp_read()

Clang static code analyzer show warning:
hw/arm/omap1.c:1760:15: warning: Value stored to 'cpu' during its
initialization is never read
CPUState *cpu = CPU(s->cpu);
^~~ ~~~~~~~~~~~

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200827110311.164316-3-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/arm/virt-acpi-build:Remove dead assignment in build_madt()

Clang static code analyzer show warning:
hw/arm/virt-acpi-build.c:641:5: warning: Value stored to 'madt' is never read
madt = acpi_data_push(table_data, sizeof *madt);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200827110311.164316-2-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

linux-user: Add strace support for printing OFD fcntl operations

Signed-off-by: Mike Gelfand <mikedld@mikedld.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200830092242.31506-1-mikedld@mikedld.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

util/vfio-helpers: Unify trace-events size format

Some 'qemu_vfio_*' trace events sizes are displayed using
decimal notation, other using hexadecimal notation:

  qemu_vfio_ram_block_added s 0xaaaaf2448d90 host 0xffff5bc00000 size 0x4000000
  qemu_vfio_dma_map s 0xaaaaf2448d90 host 0xffff5bc00000 size 67108864 temporary 0 iova (nil)
  qemu_vfio_find_mapping s 0xaaaaf2448d90 host 0xffff5bc00000
  qemu_vfio_new_mapping s 0xaaaaf2448d90 host 0xffff5bc00000 size 67108864 index 4 iova 0x114000
  qemu_vfio_do_mapping s 0xaaaaf2448d90 host 0xffff5bc00000 size 67108864 iova 0x114000

As it is hard to follow, unify using hexadecimal for all sizes:

  qemu_vfio_ram_block_added s 0xaaaaf1c60d90 host 0xffff2bc00000 size 0x4000000
  qemu_vfio_dma_map s 0xaaaaf1c60d90 host 0xffff2bc00000 size 0x4000000 temporary 0 iova (nil)
  qemu_vfio_find_mapping s 0xaaaaf1c60d90 host 0xffff2bc00000
  qemu_vfio_new_mapping s 0xaaaaf1c60d90 host 0xffff2bc00000 size 0x4000000 index 4 iova 0x114000
  qemu_vfio_do_mapping s 0xaaaaf1c60d90 host 0xffff2bc00000 size 0x4000000 iova 0x114000

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200820171006.1140228-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/net/xilinx_axienet: Remove unused code

Most of the MDIOBus fields are unused. The ADVERTISE_10HALF
definition is unused. Remove unused code.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20200814133007.16850-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/scsi/scsi-disk: Replace magic '512' value by BDRV_SECTOR_SIZE

Use self-explicit definitions instead of magic '512' value.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200814082841.27000-8-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/ide/pci: Replace magic '512' value by BDRV_SECTOR_SIZE

Use self-explicit definitions instead of magic '512' value.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200814082841.27000-7-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/ide/atapi: Replace magic '512' value by BDRV_SECTOR_SIZE

Use self-explicit definitions instead of magic '512' value.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200814082841.27000-6-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/ide/ahci: Replace magic '512' value by BDRV_SECTOR_SIZE

Use self-explicit definitions instead of magic '512' value.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200814082841.27000-5-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/ide/core: Trivial typo fix

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200814082841.27000-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

docs/system/target-avr: Improve the AVR docs and add to MAINTAINERS

The examples look nicer when using "::" code blocks.
Also mention that "-d in_asm" only outputs instructions that have not
been translated by the JIT layer yet.
And while we're at it, also add the AVR doc file to the MAINTAINERS file.

Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Message-Id: <20200812155304.18016-1-huth@tuxfamily.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

mailmap: Add entry for Greg Kurz

I had stopped using gkurz@linux.vnet.ibm.com a while back already but
this email address was shutdown last June when I quit IBM. It's about
time to map it to groug@kaod.org.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <159724665142.75339.817685642171828648.stgit@bahia.lan>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

util/vfio-helpers: Fix typo in description

Remove the second 'and' introduced in commit 418026ca43
("util: Introduce vfio helpers").

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200811151643.21293-4-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

util/qemu-timer: Fix typo in description

Remove the second 'and' introduced in commit e81f86790f ("qemu-timer:
avoid checkpoints for virtual clock timers in external subsystems").

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200811151643.21293-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/i2c: Fix typo in description

Remove the second 'and' introduced in commit 73d5f22ecb
("hw/i2c: Document the I2C qdev helpers").

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200811151643.21293-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

.mailmap: Update Paul Burton email address

Following the Linux kernel equivalent patch posted on
linux-mips@vger.kernel.org [*], update Paul Burton email
address to avoid emails bouncing.

[*] 'MAINTAINERS: Use @kernel.org address for Paul Burton'
https://lore.kernel.org/patchwork/patch/1140341/

Cc: Paul Burton <paulburton@kernel.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Paul Burton <paulburton@kernel.org>
Message-Id: <20200707022544.24925-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

docs: Fix broken links

Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200807101736.3544506-1-hhan@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Revert "mailmap: Update philmd email address"

This mailmap entry does not work as I expected. I am receiving
emails related to my hobbyist contributions in my work mailbox
and I get distracted :) Remove the entry to keep things separated.

This reverts commit 289371239153b24cb7bd96b6948c6b40b4627a9b.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200806135832.2319-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/core/sysbus: Assert memory region index is in range

Devices incorrectly modelled might use invalid index while
calling sysbus_mmio_get_region(), leading to OOB access.
Help developers by asserting the index is in range.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200806130945.21629-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/core/sysbus: Fix a typo

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200806130945.21629-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

qemu-options.hx: Fix typo for netdev documentation

This patch fixes the netdev document description typo in qemu-option.hx.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200727045925.29375-1-tianjia.zhang@linux.alibaba.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

stubs/cmos: Use correct include

cmos_get_fd_drive_type() is declared in "hw/block/fdc.h".
This currently works because "hw/i386/pc.h" happens to
include it. Simplify including the correct header.

Fixes: 2055dbc1c9 ("acpi: move aml builder code for floppy device")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20200724084315.1606-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/isa/isa-superio: Fix IDE controller realization

When realizing a Super I/O with IDE controller [*], we get:

  qom/object.c:1684: object_property_try_add_child: Assertion `!child->parent' failed.
  Aborted (core dumped)

This is because the device is already realized when we try to
add the QOM property to the parent. Fix by realizing *after*
adding the QOM relationship.

[*] Set ISASuperIOClass::ide.count = N with N not zero
    (no such thing currently exists; the bug is latent)

Fixes: e508430619 ("hw/isa/superio: Make the components QOM children")
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200721124516.9602-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/i386/kvm/ioapic.c: fix typo in error message

Fix a typo in an error message for KVM_SET_IRQCHIP ioctl:
"KVM_GET_IRQCHIP" should be "KVM_SET_IRQCHIP".

Fixes: a39c1d47ac ("kvm: x86: Add user space part for in-kernel IOAPIC")
Signed-off-by: Kenta Ishiguro <kentaishiguro@slowstart.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200717123514.15406-1-kentaishiguro@slowstart.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/net/can: Add missing fallthrough statements

Add fallthrough annotations to be able to compile the code without
warnings when using -Wimplicit-fallthrough in our CFLAGS. Looking
at the code, it seems like the fallthrough is indeed intended here,
so the comments should be appropriate.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-Id: <20200630075520.29825-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/cris: Remove superfluous breaks

Remove superfluous breaks, as there is a "return" before them.

Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1594631150-36801-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/sh4: Remove superfluous breaks

Remove superfluous breaks, as there is a "return" before them.

Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1594631142-36745-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw: Remove superfluous breaks

Remove superfluous breaks, as there is a "return" before them.

Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1594631126-36631-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

block/vmdk: Remove superfluous breaks

Remove superfluous breaks, as there is a "return" before them.

Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1594631107-36574-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

vnc: Remove the superfluous break

Remove the superfluous break, as there is a "return" before.

Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>a
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1594631086-36509-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

scsi: Remove superfluous breaks

Remove superfluous breaks, as there is a "return" before them.

Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1594631062-36341-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/ppc: Remove superfluous breaks

Remove superfluous breaks, as there is a "return" before them.

Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1594631025-36219-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

target/arm/kvm: Remove superfluous break

Remove superfluous break.

Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1594630986-36148-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20200831-pull-request' into staging

usb: usb_packet_map fixes for ehci and xhci.
usb: setup_len fix (CVE-2020-14364).
usb: u2f key support (GSoC).
* v2: 32bit build fixed.
* v3: libu2f-emu dependency fixed.

# gpg: Signature made Mon 31 Aug 2020 09:32:49 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20200831-pull-request:
  usb: fix setup_len init (CVE-2020-14364)
  usb-host: workaround libusb bug
  hw/usb: Add U2F device autoscan to passthru mode
  hw/usb: Add U2F device check to passthru mode
  scripts: Add u2f-setup-gen script
  docs/qdev-device-use.txt: Add USB U2F key to the QDEV devices examples
  docs/system: Add U2F key to the USB devices examples
  meson: Add U2F key to meson
  hw/usb: Add U2F key emulated mode
  hw/usb: Add U2F key passthru mode
  hw/usb: Add U2F key base class implementation
  hw/usb: Add U2F key base class
  docs: Add USB U2F key device documentation
  hw/usb: Regroup USB HID protocol values
  ehci: drop pointless warn_report for guest bugs.
  hw: ehci: check return value of 'usb_packet_map'
  hw: ehci: destroy sglist in error path
  hw: xhci: check return value of 'usb_packet_map'

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>