OSDN Git Service
Bart Van Assche [Fri, 1 Nov 2019 21:14:47 +0000 (14:14 -0700)]
scsi: core: scsi_trace: Use get_unaligned_be*()
This patch fixes an unintended sign extension on left shifts. From Colin
King: "Shifting a u8 left will cause the value to be promoted to an
integer. If the top bit of the u8 is set then the following conversion to
an u64 will sign extend the value causing the upper 32 bits to be set in
the result."
Fix this by using get_unaligned_be*() instead.
Fixes:
bf8162354233 ("[SCSI] add scsi trace core functions and put trace points")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Link: https://lore.kernel.org/r/20191101211447.187151-1-bvanassche@acm.org
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Saurav Girepunje [Mon, 28 Oct 2019 19:42:34 +0000 (01:12 +0530)]
scsi: csiostor: Return value not required for csio_dfs_destroy
Only csio_hw_free() calling csio_dfs_destroy() and it is not checking
return value. So remove the return from csio_dfs_destroy().
Link: https://lore.kernel.org/r/20191028194234.GA27848@saurav
Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Saurav Girepunje [Sat, 26 Oct 2019 19:56:30 +0000 (01:26 +0530)]
scsi: csiostor: Fix NULL check before debugfs_remove_recursive
debugfs_remove_recursive() has taken the null pointer into account. Remove
the null check before debugfs_remove_recursive().
Link: https://lore.kernel.org/r/20191026195625.GA22455@saurav
Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Saurav Girepunje [Fri, 25 Oct 2019 13:50:14 +0000 (19:20 +0530)]
scsi: pm8001: Fix Use plain integer as NULL pointer
Replace assignment of 0 to pointer with NULL assignment.
Link: https://lore.kernel.org/r/20191025135010.GA6191@saurav
Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ming Lei [Fri, 25 Oct 2019 06:58:55 +0000 (14:58 +0800)]
scsi: core: avoid host-wide host_busy counter for scsi_mq
It isn't necessary to check the host depth in scsi_queue_rq() any more
since it has been respected by blk-mq before calling scsi_queue_rq() via
getting driver tag.
Lots of LUNs may attach to same host and per-host IOPS may reach millions,
so we should avoid expensive atomic operations on the host-wide counter in
the IO path.
This patch implements scsi_host_busy() via blk_mq_tagset_busy_iter() with
one scsi command state for reading the count of busy IOs for scsi_mq.
It is observed that IOPS is increased by 15% in IO test on scsi_debug (32
LUNs, 32 submit queues, 1024 can_queue, libaio/dio) in a dual-socket
system.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Omar Sandoval <osandov@fb.com>,
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20191025065855.6309-1-ming.lei@redhat.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Tue, 29 Oct 2019 23:07:09 +0000 (16:07 -0700)]
scsi: ufs: Use enum dev_cmd_type where appropriate
Declare all variables that hold dev_cmd_type values as an enum instead of
as an int.
Cc: Yaniv Gardi <ygardi@codeaurora.org>
Cc: Subhash Jadavani <subhashj@codeaurora.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191029230710.211926-3-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Tue, 29 Oct 2019 23:07:08 +0000 (16:07 -0700)]
scsi: ufs: Fix kernel-doc warnings
Fix the following three kernel-doc warnings:
drivers/scsi/ufs/ufs_bsg.c:165: warning: Function parameter or member 'hba' not described in 'ufs_bsg_remove'
drivers/scsi/ufs/ufshcd.c:5789: warning: Function parameter or member 'cmd_type' not described in 'ufshcd_issue_devman_upiu_cmd'
drivers/scsi/ufs/ufshcd.c:5789: warning: Excess function parameter 'msgcode' description in 'ufshcd_issue_devman_upiu_cmd'
Cc: Yaniv Gardi <ygardi@codeaurora.org>
Cc: Subhash Jadavani <subhashj@codeaurora.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191029230710.211926-2-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bean Huo [Tue, 29 Oct 2019 14:22:45 +0000 (14:22 +0000)]
scsi: ufs: delete redundant function ufshcd_def_desc_sizes()
There is no need to call ufshcd_def_desc_sizes() in ufshcd_init(), since
descriptor lengths will be checked and initialized later in
ufshcd_init_desc_sizes().
Fixes:
a4b0e8a4e92b1b(scsi: ufs: Factor out ufshcd_read_desc_param)
Link: https://lore.kernel.org/r/BN7PR08MB5684A3ACE214C3D4792CE729DB610@BN7PR08MB5684.namprd08.prod.outlook.com
Signed-off-by: Bean Huo <beanhuo@micron.com>
Acked-by: Avri Altman <avri.altman.wdc.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Steffen Maier [Fri, 25 Oct 2019 16:12:53 +0000 (18:12 +0200)]
scsi: zfcp: trace channel log even for FCP command responses
While v2.6.26 commit
b75db73159cc ("[SCSI] zfcp: Add qtcb dump to hba debug
trace") is right that we don't want to flood the (payload) trace ring
buffer, we don't trace successful FCP command responses by default. So we
can include the channel log for problem determination with failed responses
of any FSF request type.
Fixes:
b75db73159cc ("[SCSI] zfcp: Add qtcb dump to hba debug trace")
Fixes:
a54ca0f62f95 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.")
Cc: <stable@vger.kernel.org> #2.6.38+
Link: https://lore.kernel.org/r/e37597b5c4ae123aaa85fd86c23a9f71e994e4a9.1572018132.git.bblock@linux.ibm.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Steffen Maier [Fri, 25 Oct 2019 16:12:52 +0000 (18:12 +0200)]
scsi: zfcp: proper indentation to reduce confusion in zfcp_erp_required_act
No functional change.
The unary not operator only applies to the sub expression before the
logical or. So we return early if (not running) or failed.
Link: https://lore.kernel.org/r/df4f897f6e83eaa528465d0858d5a22daac47a2f.1572018132.git.bblock@linux.ibm.com
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Benjamin Block [Fri, 25 Oct 2019 16:12:51 +0000 (18:12 +0200)]
scsi: zfcp: move maximum age of diagnostic buffers into a per-adapter variable
Replace the static define (ZFCP_DIAG_MAX_AGE) with a per-adapter variable
(${adapter}->diagnostics->max_age). This new variable is exported via
sysfs, along with other, already existing adapter variables, and can both
be read and written. This way users can choose how much time should pass
between refreshes of diagnostic buffers. The default value for the age
remains to be five seconds.
By setting this new variable to 0, the caching of diagnostic buffers for
userspace accesses can also be completely removed.
All diagnostic buffers of a given adapter are subject to this setting in
the same way.
Link: https://lore.kernel.org/r/b1d0977cc884b16dd4ca6418e4320c56a4c31d63.1572018132.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Benjamin Block [Fri, 25 Oct 2019 16:12:50 +0000 (18:12 +0200)]
scsi: zfcp: implicitly refresh config-data diagnostics when reading sysfs
Adds implicit updates of cached diagnostics via Exchange Config Data when
reading sysfs attributes interfacing them. Right now this only affects the
new B2B-Credit diagnostic attribute.
This uses the same mechanism previously also used for cached diagnostics
of Exchange Port Data.
Link: https://lore.kernel.org/r/60a94f55f2630b74b468fed5f39880208abb2679.1572018132.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Benjamin Block [Fri, 25 Oct 2019 16:12:49 +0000 (18:12 +0200)]
scsi: zfcp: introduce sysfs interface to read the local B2B-Credit
In addition to the diagnostic data from the local SFP transceiver this
patch adds an interface to read the advertised buffer-to-buffer credit from
the local FC_Port.
With this patch the userspace-interface will only read data stored in the
corresponding "diagnostic buffer" (that was stored during completion of a
previous Exchange Config Data command). Implicit updating will follow later
in this series.
Link: https://lore.kernel.org/r/8a53aef87b53c50cfb1a3425b799bacb6f82b832.1572018132.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Benjamin Block [Fri, 25 Oct 2019 16:12:48 +0000 (18:12 +0200)]
scsi: zfcp: implicitly refresh port-data diagnostics when reading sysfs
This patch adds implicit updates to the sysfs entries that read the
diagnostic data stored in the "caching buffer" for Exchange Port Data.
An update is triggered once the buffer is older than ZFCP_DIAG_MAX_AGE
milliseconds (5s). This entails sending an Exchange Port Data command to
the FCP-Channel, and during its ingress path updating the cached data and
the timestamp. To prevent multiple concurrent userspace-applications from
triggering this update in parallel we synchronize all of them using a
wait-queue (waiting threads are interruptible; the updating thread is not).
Link: https://lore.kernel.org/r/c145b5cfc99a63b6a018b1184fbd27bb09c955f5.1572018132.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Benjamin Block [Fri, 25 Oct 2019 16:12:47 +0000 (18:12 +0200)]
scsi: zfcp: introduce sysfs interface for diagnostics of local SFP transceiver
This adds an interface to read the diagnostics of the local SFP transceiver
of an FCP-Channel from userspace. This comes in the form of new sysfs
entries that are attached to the CCW device representing the FCP
device. Each type of data gets its own sysfs entry; the whole collection of
entries is pooled into a new child-directory of the CCW device node:
"diagnostics".
Adds sysfs entries for:
* sfp_invalid: boolean value evaluating to whether the following 5
fields are invalid; {0, 1}; 1 - invalid
* temperature: transceiver temp.; unit 1/256°C;
range [-128°C, +128°C]
* vcc: supply voltage; unit 100μV; range [0, 6.55V]
* tx_bias: transmitter laser bias current; unit 2μA;
range [0, 131mA]
* tx_power: coupled TX output power; unit 0.1μW; range [0, 6.5mW]
* rx_power: received optical power; unit 0.1μW; range [0, 6.5mW]
* optical_port: boolean value evaluating to whether the FCP-Channel has
an optical port; {0, 1}; 1 - optical
* fec_active: boolean value evaluating to whether 16G FEC is active;
{0, 1}; 1 - active
* port_tx_type: nibble describing the port type; {0, 1, 2, 3};
0 - unknown, 1 - short wave,
2 - long wave LC 1310nm, 3 - long wave LL 1550nm
* connector_type: two bits describing the connector type; {0, 1};
0 - unknown, 1 - SFP+
This is only supported if the FCP-Channel in turn supports reporting the
SFP Diagnostic Data, otherwise read() on these new entries will return
EOPNOTSUPP (this affects only adapters older than FICON Express8S, on
Mainframe generations older than z14). Other possible errors for read()
include ENOLINK, ENODEV and ENOMEM.
With this patch the userspace-interface will only read data stored in
the corresponding "diagnostic buffer" (that was stored during completion
of an previous Exchange Port Data command). Implicit updating will
follow later in this series.
Link: https://lore.kernel.org/r/1f9cce7c829c881e7d71a3f10c5b57f3dd84ab32.1572018132.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Benjamin Block [Fri, 25 Oct 2019 16:12:46 +0000 (18:12 +0200)]
scsi: zfcp: support retrieval of SFP Data via Exchange Port Data
A new FCP channel feature allows us to read the diagnostics from our local
SFP transceivers. To make use of that add a flag
(FSF_FEATURE_REQUEST_SFP_DATA) to the feature-set we request from the FCP
channel. Whether the channel actually implements this can be determined via
an other new flag (FSF_FEATURE_REPORT_SFP_DATA), that is set in the
adapter_features field of the adapter structure after Exchange Config Data
finished.
Also add the corresponding definitions in the QTCB Bottom for Exchange Port
Data. These new definitions are only valid, if FSF_FEATURE_REPORT_SFP_DATA
is set.
Link: https://lore.kernel.org/r/ee1eba4de71eb06b4d82207ad4f428429346156f.1572018132.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Benjamin Block [Fri, 25 Oct 2019 16:12:45 +0000 (18:12 +0200)]
scsi: zfcp: add diagnostics buffer for exchange config data
In the same vein as the previous patch, add diagnostic data capture for the
Exchange Config Data command.
Link: https://lore.kernel.org/r/7d8ac0a6cad403fa8f8b888693476a84e80a277b.1572018131.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Benjamin Block [Fri, 25 Oct 2019 16:12:44 +0000 (18:12 +0200)]
scsi: zfcp: diagnostics buffer caching and use for exchange port data
The FCP channel exposes two central interfaces to receive information about
the local FCP-Adapter/-Port: Exchange Port and Exchange Config Data. Using
these commands can negatively impact the adapter if we allow them to be
sent at a very high rate.
The later parts of this patchset will introduce new user-interfaces to
receive more diagnostics from the adapter. To prevent any negative impact
from using those, this patch adds a simple caching-mechanism that will
prevent a malicious/faulty userspace-application from generating an
abnormal high amount of Exchange Port/Config Data traffic.
Relevant diagnostic data that is received via Exchange Config/Port Data is
cached in buffers associated with the corresponding adapter-struct. Each
buffer is associated with a timestamp that signals how old the data is,
and, added via a following patch in this series, lets userspace-interfaces
determine when the data is too old and needs to be updated.
Buffer-updates are made during the normal response path of the
corresponding command. With this patch only the output of the Exchange Port
Data command is captured.
Link: https://lore.kernel.org/r/054ca020ce0a53dc0d9176428bea373898944e6a.1572018130.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Benjamin Block [Fri, 25 Oct 2019 16:12:43 +0000 (18:12 +0200)]
scsi: zfcp: signal incomplete or error for sync exchange config/port data
Adds a new FSF-Request status flag (ZFCP_STATUS_FSFREQ_XDATAINCOMPLETE)
that signal that the data received using Exchange Config Data or Exchange
Port Data was incomplete. This new flags is set in the respective handlers
during the response path.
With this patch, only the synchronous FSF-functions for each command got
support for the new flag, otherwise it is transparent.
Together with this new flag and already existing status flags the
synchronous FSF-functions are extended to now detect whether the received
data is complete, incomplete or completely invalid (this includes cases
where a command ran into a timeout). This is now signaled back to the
caller, where previously only failures on the request path would result in
a bad return-code.
For complete data the return-code remains 0. For incomplete data a new
return-code -EAGAIN is added to the function-interface. For completely
invalid data the already existing return-code -EIO is reused - formerly
this was used to signal failures on the request path.
Existing callers of the FSF-functions are adjusted so that they behave as
before for return-code 0 and -EAGAIN, to not change the user-interface. As
-EIO existed all along, it was already exposed to the user - and needed
handling - and will now also be exposed in this new special case.
Link: https://lore.kernel.org/r/e14f0702fa2b00a4d1f37c7981a13f2dd1ea2c83.1572018130.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
YueHaibing [Mon, 28 Oct 2019 13:25:56 +0000 (21:25 +0800)]
scsi: lpfc: Make lpfc_debugfs_ras_log_data static
Fix sparse warning:
drivers/scsi/lpfc/lpfc_debugfs.c:2083:1: warning:
symbol 'lpfc_debugfs_ras_log_data' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20191028132556.16272-1-yuehaibing@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Saurav Girepunje [Sat, 26 Oct 2019 19:47:17 +0000 (01:17 +0530)]
scsi: lpfc: Fix NULL check before mempool_destroy is not needed
mempool_destroy has taken null pointer check into account. Remove the
redundant check.
Link: https://lore.kernel.org/r/20191026194712.GA22249@saurav
Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 25 Oct 2019 18:43:42 +0000 (11:43 -0700)]
scsi: lpfc: fix spelling error in MAGIC_NUMER_xxx
convert MAGIC_NUMER_xxx to MAGIC_NUMBER_xxx
Link: https://lore.kernel.org/r/20191025184342.6623-1-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 25 Oct 2019 18:25:30 +0000 (11:25 -0700)]
scsi: lpfc: fix build error of lpfc_debugfs.c for vfree/vmalloc
lpfc_debufs.c was missing include of vmalloc.h when compiled on PPC.
Add missing header.
Link: https://lore.kernel.org/r/20191025182530.26653-1-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luo Jiaxing [Thu, 24 Oct 2019 14:08:25 +0000 (22:08 +0800)]
scsi: hisi_sas: Record the phy down event in debugfs
The number of phy down reflects the quality of the link between SAS
controller and disk. In order to allow the user to confirm the link quality
of the system, we record the number of phy down for each phy.
The user can check the current phy down count by reading the debugfs file
corresponding to the specific phy, or clear the phy down count by writing 0
to the debugfs file.
Link: https://lore.kernel.org/r/1571926105-74636-19-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luo Jiaxing [Thu, 24 Oct 2019 14:08:24 +0000 (22:08 +0800)]
scsi: hisi_sas: Delete the debugfs folder of hisi_sas when the probe fails
Although if the debugfs initialization fails, we will delete the debugfs
folder of hisi_sas, but we did not consider the scenario where debugfs was
successfully initialized, but the probe failed for other reasons. We found
out that hisi_sas folder is still remain after the probe failed.
When probe fail, we should delete debugfs folder to avoid the above issue.
Link: https://lore.kernel.org/r/1571926105-74636-18-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luo Jiaxing [Thu, 24 Oct 2019 14:08:23 +0000 (22:08 +0800)]
scsi: hisi_sas: Add ability to have multiple debugfs dumps
We use the module parameter debugfs_dump_count to manage the upper limit of
the memory block for multiple dumps.
Link: https://lore.kernel.org/r/1571926105-74636-17-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luo Jiaxing [Thu, 24 Oct 2019 14:08:22 +0000 (22:08 +0800)]
scsi: hisi_sas: Add module parameter for debugfs dump count
We still only use dump index #0 however.
Link: https://lore.kernel.org/r/1571926105-74636-16-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luo Jiaxing [Thu, 24 Oct 2019 14:08:21 +0000 (22:08 +0800)]
scsi: hisi_sas: Allocate memory for multiple dumps of debugfs
We add multiple dumps for debugfs, but only allocate memory this time and
only dump #0.
Link: https://lore.kernel.org/r/1571926105-74636-15-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luo Jiaxing [Thu, 24 Oct 2019 14:08:20 +0000 (22:08 +0800)]
scsi: hisi_sas: Add debugfs file structure for ITCT cache
Create a file structure which was used to save the memory address for
ITCT cache at debugfs. This structure is bound to the corresponding debugfs
file, it can help callback function of debugfs file to get what it needs.
Link: https://lore.kernel.org/r/1571926105-74636-14-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luo Jiaxing [Thu, 24 Oct 2019 14:08:19 +0000 (22:08 +0800)]
scsi: hisi_sas: Add debugfs file structure for IOST cache
Create a file structure which was used to save the memory address for IOST
cache at debugfs. This structure is bound to the corresponding debugfs
file, it can help callback function of debugfs file to get what it needs.
Link: https://lore.kernel.org/r/1571926105-74636-13-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luo Jiaxing [Thu, 24 Oct 2019 14:08:18 +0000 (22:08 +0800)]
scsi: hisi_sas: Add debugfs file structure for ITCT
Create a file structure which was used to save the memory address for ITCT
at debugfs. This structure is bound to the corresponding debugfs file, it
can help callback function of debugfs file to get what it needs.
Link: https://lore.kernel.org/r/1571926105-74636-12-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luo Jiaxing [Thu, 24 Oct 2019 14:08:17 +0000 (22:08 +0800)]
scsi: hisi_sas: Add debugfs file structure for IOST
Create a file structure which was used to save the memory address for IOST
at debugfs. This structure is bound to the corresponding debugfs file, it
can help callback function of debugfs file to get what it needs.
Link: https://lore.kernel.org/r/1571926105-74636-11-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luo Jiaxing [Thu, 24 Oct 2019 14:08:16 +0000 (22:08 +0800)]
scsi: hisi_sas: Add debugfs file structure for port
Create a file structure which was used to save the memory address and phy
pointer for port at debugfs. This structure is bound to the corresponding
debugfs file, it can help callback function of debugfs file to get what it
need.
Link: https://lore.kernel.org/r/1571926105-74636-10-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luo Jiaxing [Thu, 24 Oct 2019 14:08:15 +0000 (22:08 +0800)]
scsi: hisi_sas: Add debugfs file structure for registers
Create a file structure which was used to save the memory address and
hisi_hba pointer for REGS at debugfs. This structure is bound to the
corresponding debugfs file, it can help callback function of debugfs file
to get what it need.
Link: https://lore.kernel.org/r/1571926105-74636-9-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luo Jiaxing [Thu, 24 Oct 2019 14:08:14 +0000 (22:08 +0800)]
scsi: hisi_sas: Add debugfs file structure for DQ
Create a file structure which was used to save the memory address and DQ
pointer for DQ at debugfs. This structure is bound to the corresponding
debugfs file, it can help callback function of debugfs file to get what it
need.
Link: https://lore.kernel.org/r/1571926105-74636-8-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luo Jiaxing [Thu, 24 Oct 2019 14:08:13 +0000 (22:08 +0800)]
scsi: hisi_sas: Add debugfs file structure for CQ
Create a file structure which was used to save the memory address and CQ
pointer for CQ at debugfs. This structure is bound to the corresponding
debugfs file, it can help callback function of debugfs file to get what it
need.
Link: https://lore.kernel.org/r/1571926105-74636-7-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luo Jiaxing [Thu, 24 Oct 2019 14:08:12 +0000 (22:08 +0800)]
scsi: hisi_sas: Add timestamp for a debugfs dump
It's useful to know when the dump occurred, so add a timestamp file for
this.
Link: https://lore.kernel.org/r/1571926105-74636-6-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiang Chen [Thu, 24 Oct 2019 14:08:11 +0000 (22:08 +0800)]
scsi: hisi_sas: Replace in_softirq() check in hisi_sas_task_exec()
For IOs from upper layer, preemption may be disabled as it may be called by
function __blk_mq_delay_run_hw_queue which will call get_cpu() (it disables
preemption). So if flags HISI_SAS_REJECT_CMD_BIT is set in function
hisi_sas_task_exec(), it may disable preempt twice after down() and up()
which will cause following call trace:
BUG: scheduling while atomic: fio/60373/0x00000002
Call trace:
dump_backtrace+0x0/0x150
show_stack+0x24/0x30
dump_stack+0xa0/0xc4
__schedule_bug+0x68/0x88
__schedule+0x4b8/0x548
schedule+0x40/0xd0
schedule_timeout+0x200/0x378
__down+0x78/0xc8
down+0x54/0x70
hisi_sas_task_exec.isra.10+0x598/0x8d8 [hisi_sas_main]
hisi_sas_queue_command+0x28/0x38 [hisi_sas_main]
sas_queuecommand+0x168/0x1b0 [libsas]
scsi_queue_rq+0x2ac/0x980
blk_mq_dispatch_rq_list+0xb0/0x550
blk_mq_do_dispatch_sched+0x6c/0x110
blk_mq_sched_dispatch_requests+0x114/0x1d8
__blk_mq_run_hw_queue+0xb8/0x130
__blk_mq_delay_run_hw_queue+0x1c0/0x220
blk_mq_run_hw_queue+0xb0/0x128
blk_mq_sched_insert_requests+0xdc/0x208
blk_mq_flush_plug_list+0x1b4/0x3a0
blk_flush_plug_list+0xdc/0x110
blk_finish_plug+0x3c/0x50
blkdev_direct_IO+0x404/0x550
generic_file_read_iter+0x9c/0x848
blkdev_read_iter+0x50/0x78
aio_read+0xc8/0x170
io_submit_one+0x1fc/0x8d8
__arm64_sys_io_submit+0xdc/0x280
el0_svc_common.constprop.0+0xe0/0x1e0
el0_svc_handler+0x34/0x90
el0_svc+0x10/0x14
...
To solve the issue, check preemptible() to avoid disabling preempt multiple
when flag HISI_SAS_REJECT_CMD_BIT is set.
Link: https://lore.kernel.org/r/1571926105-74636-5-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiang Chen [Thu, 24 Oct 2019 14:08:10 +0000 (22:08 +0800)]
scsi: hisi_sas: use wait_for_completion_timeout() when clearing ITCT
When injecting 2bit ecc errors, it will cause confusion inside SAS
controller which needs host reset to recover it. If a device is gone at the
same times inject 2bit ecc errors, we may not receive the ITCT interrupt so
it will wait for completion in clear_itct_v3_hw() all the time. And host
reset will also not occur because it can't require hisi_hba->sem, so the
system will be suspended.
To solve the issue, use wait_for_completion_timeout() instead of
wait_for_completion(), and also don't mark the gone device as
SAS_PHY_UNUSED when device gone.
Link: https://lore.kernel.org/r/1571926105-74636-4-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiang Chen [Thu, 24 Oct 2019 14:08:09 +0000 (22:08 +0800)]
scsi: hisi_sas: Set the BIST init value before enabling BIST
If set the BIST init value after enabling BIST, there may be still some few
error bits. According to the process, need to set the BIST init value
before enabling BIST.
Fixes:
97b151e75861 ("scsi: hisi_sas: Add BIST support for phy loopback")
Link: https://lore.kernel.org/r/1571926105-74636-3-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiang Chen [Thu, 24 Oct 2019 14:08:08 +0000 (22:08 +0800)]
scsi: hisi_sas: Don't create debugfs dump folder twice
Due to a merge error, we attempt to create 2x debugfs dump folders, which
fails:
[ 861.101914] debugfs: Directory 'dump' with parent '0000:74:02.0'
already present!
This breaks the dump function.
To fix, remove the superfluous attempt to create the folder.
Fixes:
7ec7082c57ec ("scsi: hisi_sas: Add hisi_sas_debugfs_alloc() to centralise allocation")
Link: https://lore.kernel.org/r/1571926105-74636-2-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Geert Uytterhoeven [Thu, 24 Oct 2019 15:26:33 +0000 (17:26 +0200)]
scsi: Fix various misspellings of "connect"
Fix misspellings of "disonnect", "reconnect", "connection", "connected",
and "disconnection".
Link: https://lore.kernel.org/r/20191024152633.30404-1-geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Geert Uytterhoeven [Thu, 24 Oct 2019 15:25:43 +0000 (17:25 +0200)]
scsi: isci: Spelling s/configruation/configuration/
Fix misspelling of "configuration".
Link: https://lore.kernel.org/r/20191024152543.30310-1-geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tomas Henzl [Thu, 24 Oct 2019 15:28:35 +0000 (17:28 +0200)]
scsi: mpt3sas: change allocation option
From an interrupt handler path memory may be allocated using
GFP_KERNEL, replace it with GFP_ATOMIC.
_base_interrupt->_scsih_io_done->_scsih_smart_predicted_fault
Link: https://lore.kernel.org/r/20191024152835.6177-1-thenzl@redhat.com
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dan Carpenter [Tue, 22 Oct 2019 10:23:24 +0000 (13:23 +0300)]
scsi: esas2r: unlock on error in esas2r_nvram_read_direct()
This error path is missing an unlock.
Fixes:
26780d9e12ed ("[SCSI] esas2r: ATTO Technology ExpressSAS 6G SAS/SATA RAID Adapter Driver")
Link: https://lore.kernel.org/r/20191022102324.GA27540@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
YueHaibing [Mon, 21 Oct 2019 14:20:42 +0000 (22:20 +0800)]
scsi: cxgb4i: remove set but not used variable 'ppmax'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:2076:15:
warning: variable ppmax set but not used [-Wunused-but-set-variable]
drivers/target/iscsi/cxgbit/cxgbit_ddp.c:300:15:
warning: variable ppmax set but not used [-Wunused-but-set-variable]
It is not used since commit
a248384e6420 ("cxgb4/libcxgb/cxgb4i/cxgbit:
enable eDRAM page pods for iSCSI")
Link: https://lore.kernel.org/r/20191021142042.30964-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dan Carpenter [Sat, 19 Oct 2019 08:59:13 +0000 (11:59 +0300)]
scsi: csiostor: Don't enable IRQs too early
These are called with IRQs disabled from csio_mgmt_tmo_handler() so we
can't call spin_unlock_irq() or it will enable IRQs prematurely.
Fixes:
a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Link: https://lore.kernel.org/r/20191019085913.GA14245@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Saurav Girepunje [Thu, 24 Oct 2019 03:09:01 +0000 (08:39 +0530)]
scsi: lpfc: lpfc_nvmet: Fix Use plain integer as NULL pointer
Replace assignment of 0 to pointer with NULL assignment.
Link: https://lore.kernel.org/r/20191024030857.GA12097@saurav
Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Acked-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Saurav Girepunje [Thu, 24 Oct 2019 02:57:29 +0000 (08:27 +0530)]
scsi: lpfc: lpfc_attr: Fix Use plain integer as NULL pointer
Replace assignment of 0 to pointer with NULL assignment.
Link: https://lore.kernel.org/r/20191024025726.GA31421@saurav
Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Acked-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 18 Oct 2019 21:18:32 +0000 (14:18 -0700)]
scsi: lpfc: Update lpfc version to 12.6.0.0
Update lpfc version to 12.6.0.0
Link: https://lore.kernel.org/r/20191018211832.7917-17-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 18 Oct 2019 21:18:31 +0000 (14:18 -0700)]
scsi: lpfc: Add additional discovery log messages
When debugging a recent discovery customer problem it was very hard to tell
what was happening with the existing discovery log messages. To fully debug
the issue additional log messages were necessary.
Add or extend log messages so that sufficient information is present for
debugging.
Link: https://lore.kernel.org/r/20191018211832.7917-16-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 18 Oct 2019 21:18:30 +0000 (14:18 -0700)]
scsi: lpfc: Add FC-AL support to lpe32000 models
In the past, the lpe32000 models, based their main support being for 32G,
and as FC-AL is not supported in the FC standards past 8G, did not support
FC-AL operation.
This patch adds private-loop FC-AL support for the LPE32000 adapters
when a link is 8G or below. To avoid conditions where link rate may
change, which would cause non-connectivity to the AL device, FC-AL
mode must become a persistent setting and the link kept at a speed
supporting FC-AL.
The patch:
- Adds a pls attribute indicating whether the adapter properly supports
FC-AL.
- Adds support for the adapter to indicate that topology should be fixed
and the topology types to be configured.
- Adds a pt attribute to report the persistent topology if present.
Link: https://lore.kernel.org/r/20191018211832.7917-15-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 18 Oct 2019 21:18:29 +0000 (14:18 -0700)]
scsi: lpfc: Add FA-WWN Async Event reporting
Add decode support for adapter Async Events which report FA-WWN
configuration errors.
Link: https://lore.kernel.org/r/20191018211832.7917-14-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 18 Oct 2019 21:18:28 +0000 (14:18 -0700)]
scsi: lpfc: Add log macros to allow print by serverity or verbosity setting
Add two new macros to aid in message logging:
Both macros print a message if the corresponding lpfc verbosity setting is
set or the kernel log level is WARNING or more critical.
One macro is for use with a phba structure, the other with a vport
structure.
[mkp: typo]
Link: https://lore.kernel.org/r/20191018211832.7917-13-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 18 Oct 2019 21:18:27 +0000 (14:18 -0700)]
scsi: lpfc: Make FW logging dynamically configurable
Currently, the FW logging facility is a load/boot time parameter which
requires the driver to be unloaded/reloaded or the system rebooted in order
to change its configuration.
Convert the logging facility to allow dynamic enablement and configuration.
Specifically:
- Convert the feature so that it can be enabled dynamically via an
attribute. Additionally, the size of the buffer can be configured
dynamically.
- Add locks around states that now may be changing.
- Tie the feature into debugfs so that the logs can be read at any time.
Link: https://lore.kernel.org/r/20191018211832.7917-12-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 18 Oct 2019 21:18:26 +0000 (14:18 -0700)]
scsi: lpfc: Revise interrupt coalescing for missing scenarios
The existing "auto eq delay" mechanism was sometimes skipping over an EQ,
not ramping the coalescing down under light load fast enough, and in other
cases never kicked in as cpu sharing by multiple vectors didn't quite add
up right.
Tweak the interrupt mechanism such that:
- Add a flag to the EQ to force checking for colaescing values when being
serviced in the interrupt handler. The flag will be set by any CQ bound
to the EQ whenever the number of CQ elements process in a single scan
meets or exceeds the hardware queue notify level. E.g. there's a
significant number of completions happening.
- In the heartbeat work item that checks coalescing:
- Replace the structure that was counting the number of EQs that
interrupted on a single cpu with a new structure that looks at the EQ
to see whether EQ currently has a coalescing value (thus it should be
re-evaluate) or was marked by the new flag indicating heavy
completions.
- When a cpu, which may be servicing multiple vectors, had at least 1 EQ
that should be checked, a new coalescing delay is calculated based on
the number of interrupts that occurred on the cpu.
- The new coalescing value is then applied to the EQs that had
interrupted on the cpu.
Link: https://lore.kernel.org/r/20191018211832.7917-11-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 18 Oct 2019 21:18:25 +0000 (14:18 -0700)]
scsi: lpfc: Remove lock contention target write path
Lower IOps performance with write operations. Perf tool shows lock
contention in dma_pool_alloc and dma_pool_free related to the
txrdy_payload_pool.
The allocations are for dma buffers for XFER_RDY's, which actually are not
needed for the FCP_TRECEIVE command as the command contents are used by the
adapter to generate the IU.
Remove the allocations and the associated buffer pool. Rather than leaving
NULLs in buffer pointer locations, set command and sgl to indicate skipped
SGLE indexes.
Link: https://lore.kernel.org/r/20191018211832.7917-10-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 18 Oct 2019 21:18:24 +0000 (14:18 -0700)]
scsi: lpfc: Slight fast-path performance optimizations
Slightly rework some error check code paths for better streamlining.
Added compiler unlikely hints to allow slightly better optimization of the
fast-path.
Removed a few pointer checks that were obviously already valid.
Link: https://lore.kernel.org/r/20191018211832.7917-9-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 18 Oct 2019 21:18:23 +0000 (14:18 -0700)]
scsi: lpfc: fix coverity error of dereference after null check
Log message conditional upon vport being NULL dereferences vport to
determine log verbose setting.
Changed to use lpfc_print_log which uses phba to determine the active log
verbose setting.
Fixes:
43bfea1bffb6 ("scsi: lpfc: Fix coverity errors on NULL pointer checks")
Link: https://lore.kernel.org/r/20191018211832.7917-8-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 18 Oct 2019 21:18:22 +0000 (14:18 -0700)]
scsi: lpfc: Fix hardlockup in lpfc_abort_handler
In lpfc_abort_handler, the lock acquire order is hbalock (irqsave),
buf_lock (irq) and ring_lock (irq). The issue is that in two places the
locks are released out of order - the buf_lock and the hbalock - resulting
in the cpu preemption/lock flags getting restored out of order and
deadlocking the cpu.
Fix the unlock order by fully releasing the hbalocks as well.
CC: Zhangguanghui <zhang.guanghui@h3c.com>
Link: https://lore.kernel.org/r/20191018211832.7917-7-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 18 Oct 2019 21:18:21 +0000 (14:18 -0700)]
scsi: lpfc: Fix bad ndlp ptr in xri aborted handling
In cases where I/O may be aborted, such as driver unload or link bounces,
the system will crash based on a bad ndlp pointer.
Example:
RIP: 0010:lpfc_sli4_abts_err_handler+0x15/0x140 [lpfc]
...
lpfc_sli4_io_xri_aborted+0x20d/0x270 [lpfc]
lpfc_sli4_sp_handle_abort_xri_wcqe.isra.54+0x84/0x170 [lpfc]
lpfc_sli4_fp_handle_cqe+0xc2/0x480 [lpfc]
__lpfc_sli4_process_cq+0xc6/0x230 [lpfc]
__lpfc_sli4_hba_process_cq+0x29/0xc0 [lpfc]
process_one_work+0x14c/0x390
Crash was caused by a bad ndlp address passed to I/O indicated by the XRI
aborted CQE. The address was not NULL so the routine deferenced the ndlp
ptr. The bad ndlp also caused the lpfc_sli4_io_xri_aborted to call an
erroneous io handler. Root cause for the bad ndlp was an lpfc_ncmd that
was aborted, put on the abort_io list, completed, taken off the abort_io
list, sent to lpfc_release_nvme_buf where it was put back on the abort_io
list because the lpfc_ncmd->flags setting LPFC_SBUF_XBUSY was not cleared
on the final completion.
Rework the exchange busy handling to ensure the flags are properly set for
both scsi and nvme.
Fixes:
c490850a0947 ("scsi: lpfc: Adapt partitioned XRI lists to efficient sharing")
Cc: <stable@vger.kernel.org> # v5.1+
Link: https://lore.kernel.org/r/20191018211832.7917-6-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 18 Oct 2019 21:18:20 +0000 (14:18 -0700)]
scsi: lpfc: Fix SLI3 hba in loop mode not discovering devices
When operating in private loop mode, PLOGI exchanges are racing and the
driver tries to abort it's PLOGI. But the PLOGI abort ends up terminating
the login with the other end causing the other end to abort its PLOGI as
well. Discovery never fully completes.
Fix by disabling the PLOGI abort when private loop and letting the state
machine play out.
Link: https://lore.kernel.org/r/20191018211832.7917-5-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 18 Oct 2019 21:18:19 +0000 (14:18 -0700)]
scsi: lpfc: Fix lockdep errors in sli_ringtx_put
Fix lockdep error in __lpfc_sli_ringtx_put(): The hbalock is valid for
sli3, but not for sli4. Change lockdep to look at ring lock if sli4.
Also update comment in __lpfc_sli_issue_iocb_s4() to reflect proper
lock. Note: lockdep check is already correct.
Link: https://lore.kernel.org/r/20191018211832.7917-4-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 18 Oct 2019 21:18:18 +0000 (14:18 -0700)]
scsi: lpfc: Fix reporting of read-only fw error errors
When the adapter FW is administratively set to RO mode, a FW update
triggered by the driver's sysfs attribute will fail. Currently, the
driver's logging mechanism does not properly parse the adapter return codes
and print a meaningful message. This oversight prevents quick diagnosis in
the field.
Parse the adapter return codes for Write_Object and write an appropriate
message to the system console.
[mkp: typo]
Link: https://lore.kernel.org/r/20191018211832.7917-3-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Fri, 18 Oct 2019 21:18:17 +0000 (14:18 -0700)]
scsi: lpfc: fix lpfc_nvmet_mrq to be bound by hdw queue count
Currently, lpfc_nvmet_mrq is always scaled back to the min(lpfc_nvmet_mrq,
lpfc_irq_chann). There's no reason to reduce it to the number of interrupt
vectors. Rather, it should be scaled down based on the number of hardware
queues for the system (if lower than max of 16).
Change scaling to use hardware queue count rather than interrupt vector
count.
Link: https://lore.kernel.org/r/20191018211832.7917-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
YueHaibing [Mon, 21 Oct 2019 14:19:57 +0000 (22:19 +0800)]
scsi: cxlflash: remove set but not used variable 'ioarcb'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/cxlflash/main.c:47:22: warning:
variable ioarcb set but not used [-Wunused-but-set-variable]
It is never used, so can be removed.
Link: https://lore.kernel.org/r/20191021141957.18828-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Matthew R. Ochs <mrochs@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
David Disseldorp [Thu, 12 Sep 2019 09:55:47 +0000 (11:55 +0200)]
scsi: target: remove unused extension parameters
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20190912095547.22427-4-ddiss@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
David Disseldorp [Thu, 12 Sep 2019 09:55:46 +0000 (11:55 +0200)]
scsi: target: fix SendTargets=All string compares
strncmp is currently used for "SendTargets" key and "All" value matching
without checking for trailing garbage. This means that Text request PDUs
with garbage such as "SendTargetsPlease=All" and "SendTargets=Alle" are
processed successfully as if they were "SendTargets=All" requests.
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20190912095547.22427-3-ddiss@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
David Disseldorp [Thu, 12 Sep 2019 09:55:45 +0000 (11:55 +0200)]
scsi: target: compare full CHAP_A Algorithm strings
RFC 2307 states:
For CHAP [RFC1994], in the first step, the initiator MUST send:
CHAP_A=<A1,A2...>
Where A1,A2... are proposed algorithms, in order of preference.
...
For the Algorithm, as stated in [RFC1994], one value is required to
be implemented:
5 (CHAP with MD5)
LIO currently checks for this value by only comparing a single byte in
the tokenized Algorithm string, which means that any value starting with
a '5' (e.g. "55") is interpreted as "CHAP with MD5". Fix this by
comparing the entire tokenized string.
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20190912095547.22427-2-ddiss@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Balsundar P [Tue, 15 Oct 2019 06:22:04 +0000 (11:52 +0530)]
scsi: aacraid: bump version
Bump version to 50877.
Link: https://lore.kernel.org/r/1571120524-6037-8-git-send-email-balsundar.p@microsemi.com
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Balsundar P [Tue, 15 Oct 2019 06:22:03 +0000 (11:52 +0530)]
scsi: aacraid: send AIF request post IOP RESET
After IOP reset completion, AIF request command is not issued to the
controller. Driver schedules a worker thread to issue a AIF request command
after IOP reset completion.
[mkp: fix zeroday warning]
Link: https://lore.kernel.org/r/1571120524-6037-7-git-send-email-balsundar.p@microsemi.com
Acked-by: Balsundar P < Balsundar.P@microchip.com>
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Balsundar P [Tue, 15 Oct 2019 06:22:02 +0000 (11:52 +0530)]
scsi: aacraid: check adapter health
Currently driver waits for the command IOCTL from the firmware and if the
firmware enters nonresponsive state, the driver doesn't respond till the
firmware is responsive again.
Check that firmware is alive, otherwise return -EBUSY.
[mkp: clarified commit desc]
Link: https://lore.kernel.org/r/1571120524-6037-6-git-send-email-balsundar.p@microsemi.com
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Balsundar P [Tue, 15 Oct 2019 06:22:01 +0000 (11:52 +0530)]
scsi: aacraid: setting different timeout for src and thor
Set 180 second timeout for thor and 60 seconds for src controllers.
Link: https://lore.kernel.org/r/1571120524-6037-5-git-send-email-balsundar.p@microsemi.com
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Balsundar P [Tue, 15 Oct 2019 06:22:00 +0000 (11:52 +0530)]
scsi: aacraid: fixed firmware assert issue
Before issuing IOP reset, INTX mode is selected. This is triggering MSGU
lockup and ended in basecode assert. Use DROP_IO command when IOP reset is
sent in preparation for interrupt mode switch.
Link: https://lore.kernel.org/r/1571120524-6037-4-git-send-email-balsundar.p@microsemi.com
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Balsundar P [Tue, 15 Oct 2019 06:21:59 +0000 (11:51 +0530)]
scsi: aacraid: fixed IO reporting error
The problem is the driver detects FastResponse bit set and saves it to
Fib's flags to not check IO response status, but it never clears it for
next IO. Hence the next IO will pick up FastResponse bit to not check
the IO response status and fail to report any type IO error to kernel
Link: https://lore.kernel.org/r/1571120524-6037-3-git-send-email-balsundar.p@microsemi.com
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Balsundar P [Tue, 15 Oct 2019 06:21:58 +0000 (11:51 +0530)]
scsi: aacraid: fix illegal IO beyond last LBA
The driver fails to handle data when read or written beyond device reported
LBA, which triggers kernel panic
Link: https://lore.kernel.org/r/1571120524-6037-2-git-send-email-balsundar.p@microsemi.com
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
zhengbin [Wed, 9 Oct 2019 07:23:44 +0000 (15:23 +0800)]
scsi: megaraid_sas: remove unused variables 'debugBlk','fusion'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/megaraid/megaraid_sas_fp.c: In function MR_GetSpanBlock:
drivers/scsi/megaraid/megaraid_sas_fp.c:400:16: warning: variable debugBlk set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_sas_fp.c: In function mr_spanset_get_phy_params:
drivers/scsi/megaraid/megaraid_sas_fp.c:713:25: warning: variable fusion set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_sas_fp.c: In function MR_GetPhyParams:
drivers/scsi/megaraid/megaraid_sas_fp.c:815:25: warning: variable fusion set but not used [-Wunused-but-set-variable]
'debugBlk' is introduced by commit
9c915a8c99bc ("[SCSI] megaraid_sas:
Add 9565/9285 specific code"), but never used, so remove it
'fusion' is not used since commit
c365178f3147 ("scsi: megaraid_sas:
use adapter_type for all gen controllers")
Link: https://lore.kernel.org/r/1570605824-89133-1-git-send-email-zhengbin13@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Chandrakanth Patil [Mon, 7 Oct 2019 05:18:28 +0000 (10:48 +0530)]
scsi: megaraid_sas: Unique names for MSI-X vectors
Currently, MSI-X vectors name appears in /proc/interrupts is "megasas"
which is same for all the vectors. This patch provides a unique name for
all megaraid_sas controllers and their associated MSI-X interrupts.
Link: https://lore.kernel.org/r/20191007051828.12294-1-chandrakanth.patil@broadcom.com
Suggested-by: Konstantin Shalygin <k0ste@k0ste.ru>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Mon, 7 Oct 2019 22:32:15 +0000 (17:32 -0500)]
scsi: smartpqi: bump version
Link: https://lore.kernel.org/r/157048753592.11757.3634142461093493860.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Gerry Morong <gerry.morong@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Mon, 7 Oct 2019 22:32:10 +0000 (17:32 -0500)]
scsi: smartpqi: Align driver syntax with oob
Formatting changes, no functional changes.
Link: https://lore.kernel.org/r/157048753005.11757.2228541207280057256.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Mon, 7 Oct 2019 22:32:04 +0000 (17:32 -0500)]
scsi: smartpqi: remove unused manifest constants
Removed some unused manifest constants.
Link: https://lore.kernel.org/r/157048752420.11757.3464951542864727227.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Mon, 7 Oct 2019 22:31:58 +0000 (17:31 -0500)]
scsi: smartpqi: fix problem with unique ID for physical device
Obtain the unique IDs from the RLL and RPL instead of VPD page 83h.
Link: https://lore.kernel.org/r/157048751833.11757.11996314786914610803.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Mon, 7 Oct 2019 22:31:52 +0000 (17:31 -0500)]
scsi: smartpqi: correct syntax issue
Link: https://lore.kernel.org/r/157048751247.11757.1727592925624138646.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Mon, 7 Oct 2019 22:31:46 +0000 (17:31 -0500)]
scsi: smartpqi: change TMF timeout from 60 to 30 seconds
Link: https://lore.kernel.org/r/157048750649.11757.7811056360633694725.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Murthy Bhat [Mon, 7 Oct 2019 22:31:40 +0000 (17:31 -0500)]
scsi: smartpqi: fix LUN reset when fw bkgnd thread is hung
Add support for a timeout on LUN resets.
Link: https://lore.kernel.org/r/157048750055.11757.9689400788261610618.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
koshyaji [Mon, 7 Oct 2019 22:31:34 +0000 (17:31 -0500)]
scsi: smartpqi: add inquiry timeouts
Add timeout field in RAID IU.
Link: https://lore.kernel.org/r/157048749461.11757.10013040278241807855.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: koshyaji <ajish.koshy@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Murthy Bhat [Mon, 7 Oct 2019 22:31:28 +0000 (17:31 -0500)]
scsi: smartpqi: fix call trace in device discovery
Use sas_phy_delete rather than sas_phy_free which, according to
comments, should not be called for PHYs that have been set up
successfully.
Link: https://lore.kernel.org/r/157048748876.11757.17773443136670011786.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kevin Barnett [Mon, 7 Oct 2019 22:31:23 +0000 (17:31 -0500)]
scsi: smartpqi: fix controller lockup observed during force reboot
Link: https://lore.kernel.org/r/157048748297.11757.3872221216800537383.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dan Carpenter [Fri, 4 Oct 2019 10:06:15 +0000 (13:06 +0300)]
scsi: mpt3sas: Clean up some indenting
This line is indented too far so it's a bit confusing.
Link: https://lore.kernel.org/r/20191004100615.GA823@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
zhengbin [Fri, 4 Oct 2019 10:04:37 +0000 (18:04 +0800)]
scsi: lpfc: Make function lpfc_defer_pt2pt_acc static
Fix sparse warnings:
drivers/scsi/lpfc/lpfc_nportdisc.c:290:1: warning: symbol 'lpfc_defer_pt2pt_acc' was not declared. Should it be static?
Link: https://lore.kernel.org/r/1570183477-137273-1-git-send-email-zhengbin13@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Masahiro Yamada [Sun, 28 Jul 2019 16:46:43 +0000 (01:46 +0900)]
scsi: ch: add include guard to chio.h
Add a header include guard just in case.
Link: https://lore.kernel.org/r/20190728164643.16335-1-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Himanshu Madhani [Thu, 12 Sep 2019 18:09:18 +0000 (11:09 -0700)]
scsi: qla2xxx: Update driver version to 10.01.00.20-k
Link: https://lore.kernel.org/r/20190912180918.6436-15-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Himanshu Madhani [Thu, 12 Sep 2019 18:09:17 +0000 (11:09 -0700)]
scsi: qla2xxx: Improve logging for scan thread
Move messages to verbose logging for scan thread.
Link: https://lore.kernel.org/r/20190912180918.6436-14-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Thu, 12 Sep 2019 18:09:16 +0000 (11:09 -0700)]
scsi: qla2xxx: Capture FW dump on MPI heartbeat stop event
For MPI heartbeat stop Async Event, this patch would capture MPI FW dump
and chip reset. FW will tell which function to capture FW dump for.
Link: https://lore.kernel.org/r/20190912180918.6436-13-hmadhani@marvell.com
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Thu, 12 Sep 2019 18:09:15 +0000 (11:09 -0700)]
scsi: qla2xxx: Check for MB timeout while capturing ISP27/28xx FW dump
Add mailbox timeout checkout for ISP 27xx/28xx during FW dump procedure.
Without the timeout check, hardware lock can be held for long period. This
patch would shorten the dump procedure if a timeout condition is
encountered.
Link: https://lore.kernel.org/r/20190912180918.6436-12-hmadhani@marvell.com
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Thu, 12 Sep 2019 18:09:14 +0000 (11:09 -0700)]
scsi: qla2xxx: Set remove flag for all VP
During driver unload, the remove flag will be set for all
scsi_qla_host/NPIV. This allows each NPIV to see the flag instead of
reaching for base_vha to search for it.
Link: https://lore.kernel.org/r/20190912180918.6436-11-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Thu, 12 Sep 2019 18:09:13 +0000 (11:09 -0700)]
scsi: qla2xxx: Add error handling for PLOGI ELS passthrough
Add error handling logic to ELS Passthrough relating to NVME devices.
Current code does not parse error code to take proper recovery action,
instead it re-logins with the same login parameters that encountered the
error. Ex: nport handle collision.
Link: https://lore.kernel.org/r/20190912180918.6436-10-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Michael Hernandez [Thu, 12 Sep 2019 18:09:12 +0000 (11:09 -0700)]
scsi: qla2xxx: Dual FCP-NVMe target port support
Some storage arrays advertise FCP LUNs and NVMe namespaces behind the same
WWN. The driver now offers a user option by way of NVRAM parameter to
allow users to choose, on a per port basis, the kind of FC-4 type they
would like to prioritize for login.
Link: https://lore.kernel.org/r/20190912180918.6436-9-hmadhani@marvell.com
Signed-off-by: Michael Hernandez <mhernandez@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Martin K. Petersen [Thu, 10 Oct 2019 01:54:04 +0000 (21:54 -0400)]
Merge branch '5.4/scsi-fixes' into 5.5/scsi-queue
The qla2xxx driver updates for 5.5 depend on the fixes queued for
5.4.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Mon, 30 Sep 2019 23:22:24 +0000 (16:22 -0700)]
scsi: target: Remove tpg_list and se_portal_group.se_tpg_node
Maintaining tpg_list without ever iterating over it is not useful. Hence
remove tpg_list. This patch does not change the behavior of the SCSI target
code.
Cc: Mike Christie <mchristie@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Link: https://lore.kernel.org/r/20190930232224.58980-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>