OSDN Git Service
Gabriel L. Somlo [Mon, 2 Jun 2014 13:33:28 +0000 (09:33 -0400)]
tests: e1000: test additional device IDs
Update e1000-test.c to check all currently supported devices.
Suggested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Gabriel L. Somlo [Mon, 2 Jun 2014 13:33:27 +0000 (09:33 -0400)]
e1000: allow command-line selection of card model
Allow selection of different card models from the qemu
command line, to better accomodate a wider range of guests.
Signed-off-by: Romain Dolbeau <romain@dolbeau.org>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Jiri Pirko [Mon, 19 May 2014 13:47:16 +0000 (15:47 +0200)]
vmxnet3: fix msix vectors unuse
In vmxnet3_cleanup_msix(), there is called msix_vector_unuse() with
VMXNET3_MAX_INTRS. That is not correct since vector of
value VMXNET3_MAX_INTRS was never used. Also all the used vectors
are not un-used. So call vmxnet3_unuse_msix_vectors() instead which
does the correct job.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Crosthwaite [Tue, 6 May 2014 04:39:38 +0000 (21:39 -0700)]
net: xilinx_ethlite: Fix Rx-pong interrupt
There is no CTRL_I bit in the pong buffer control register. The
CTRL_I bit from the ping buffer masks both ping and pong buffers.
Fix.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Samuel Thibault [Wed, 14 May 2014 01:13:09 +0000 (03:13 +0200)]
slirp/arp: do not special-case bogus IP addresses
Do not special-case addresses with zero host part, as we do not
necessarily know how big it is, and the guest can fake them anyway.
Silently avoid having 0.0.0.0 as a destination, however.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
[Edgar: Minor change to subject]
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Peter Maydell [Sat, 7 Jun 2014 17:03:02 +0000 (18:03 +0100)]
target-cris/translate.c: Remove _t_gen_mov_TN_env and _t_gen_mov_env_TN
The wrapper functions _t_gen_mov_TN_env and _t_gen_mov_env_TN are only
used via their accompanying non-underscore macros. The check they add
on offset is thus pointless, since the compiler will complain if the
struct field passed to the macro is not part of the struct. Remove the
functions and make the macros directly expand to the appropriate
tcg_gen_{ld,st}_tl calls.
This conveniently avoids a warning due to _t_gen_mov_TN_env() being
unused.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Peter Maydell [Sat, 7 Jun 2014 17:03:01 +0000 (18:03 +0100)]
target-cris/translate.c: Remove t_gen_mov_TN_reg and t_gen_mov_reg_TN
Remove the t_gen_mov_TN_reg and t_gen_mov_reg_TN wrappers: the
latter is completely unused, and the former only used in a few
places (which are thus inconsistent with the rest of the decoder
which directly accesses cpu_R[]).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Peter Crosthwaite [Thu, 29 May 2014 09:26:12 +0000 (02:26 -0700)]
intc: xilinx_uartlite: Convert SBD::init -> instance_init
SysBusDevice::init is depracated. Convert to Object::init
as prescribed by QOM conventions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Peter Crosthwaite [Thu, 29 May 2014 09:25:37 +0000 (02:25 -0700)]
char: xilinx_uartlite: Convert to realize()
SysBusDevice::init is depracated. Convert to Object::init and
Device::realize as prescribed by QOM conventions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Peter Crosthwaite [Thu, 29 May 2014 09:25:03 +0000 (02:25 -0700)]
char: xilinx_uartlite: Don't reset from init
This refresh of the device state is intended to be a reset side
effect. Move it to a proper reset handler rather than do it at
init time.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Peter Crosthwaite [Thu, 29 May 2014 09:24:29 +0000 (02:24 -0700)]
net: xilinx_ethlite: Convert to realize()
SysBusDevice::init is depracated. Convert to Object::init and
Device::realize as prescribed by QOM conventions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Peter Crosthwaite [Thu, 29 May 2014 09:23:54 +0000 (02:23 -0700)]
net: xilinx_ethlite: Don't reset from init
This zeroing-out of the rxbuf variable (ping pong state) is a reset
side effect. Extract into a proper reset.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Peter Crosthwaite [Thu, 29 May 2014 09:23:20 +0000 (02:23 -0700)]
timer: xilinx_timer: Convert to realize()
SysBusDevice::init is depracated. Convert to Object::init and
Device::realize as prescribed by QOM conventions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Peter Maydell [Thu, 5 Jun 2014 22:05:07 +0000 (23:05 +0100)]
Merge remote-tracking branch 'remotes/mcayland/qemu-sparc' into staging
* remotes/mcayland/qemu-sparc:
apb: implement IOMMU translation for PCI host bridge
apb: handle reading/writing of IOMMU control registers
apb: fix IOMMU register sizes
apb: Move IOMMU registers into a separate IOMMUState struct
tcx: move initialisation from realizefn to initfn
tcx: move initialisation from SysBusDevice class to TCX class realizefn
cg3: add extra check to prevent CG3 register array overflow
cg3: move initialisation from realizefn to initfn
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 5 Jun 2014 21:40:44 +0000 (22:40 +0100)]
Merge remote-tracking branch 'remotes/mdroth/qga-pull-2014-06-05' into staging
* remotes/mdroth/qga-pull-2014-06-05:
qga: Fix handle fd leak in acquire_privilege()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 5 Jun 2014 20:52:37 +0000 (21:52 +0100)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio,qdev fixes, tests
new tests for SMBIOS
SMBIOS fixes
pc, pci fixes
qdev patches stayed on list for a month with no review,
as I told people on KVM forum I'm merging stuch patches
if they look fine.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream:
qdev: Add test of qdev_prop_check_global
qdev: Display warning about unused -global
tests: add smbios testing
tests: rename acpi-test to bios-tables-test
virtio-balloon: return empty data when no stats are available
pcie_host: Turn pcie_host_init() into an instance_init
SMBIOS: Fix type 17 field sizes
SMBIOS: Update Type 0 struct generator for machines >= 2.1
SMBIOS: Fix endian-ness when populating multi-byte fields
serial-pci: Set prog interface field of pci config to 16550 compatible
Conflicts:
include/hw/i386/pc.h
[PMM: fixed trivial conflict in pc.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 5 Jun 2014 20:06:13 +0000 (21:06 +0100)]
Merge remote-tracking branch 'remotes/bonzini/softmmu-smap' into staging
* remotes/bonzini/softmmu-smap: (33 commits)
target-i386: cleanup x86_cpu_get_phys_page_debug
target-i386: fix protection bits in the TLB for SMEP
target-i386: support long addresses for 4MB pages (PSE-36)
target-i386: raise page fault for reserved bits in large pages
target-i386: unify reserved bits and NX bit check
target-i386: simplify pte/vaddr calculation
target-i386: raise page fault for reserved physical address bits
target-i386: test reserved PS bit on PML4Es
target-i386: set correct error code for reserved bit access
target-i386: introduce support for 1 GB pages
target-i386: introduce do_check_protect label
target-i386: tweak handling of PG_NX_MASK
target-i386: commonize checks for PAE and non-PAE
target-i386: commonize checks for 4MB and 4KB pages
target-i386: commonize checks for 2MB and 4KB pages
target-i386: fix coding standards in x86_cpu_handle_mmu_fault
target-i386: simplify SMAP handling in MMU_KSMAP_IDX
target-i386: fix kernel accesses with SMAP and CPL = 3
target-i386: move check_io helpers to seg_helper.c
target-i386: rename KSMAP to KNOSMAP
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark Cave-Ayland [Wed, 28 May 2014 07:28:22 +0000 (08:28 +0100)]
apb: implement IOMMU translation for PCI host bridge
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Mark Cave-Ayland [Wed, 28 May 2014 07:28:22 +0000 (08:28 +0100)]
apb: handle reading/writing of IOMMU control registers
While the registers are documented as being 64-bit, Linux seems to access
them in two halves as 2 x 32-bit accesses. Make sure that we can correctly
handle this case.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Mark Cave-Ayland [Wed, 28 May 2014 07:28:21 +0000 (08:28 +0100)]
apb: fix IOMMU register sizes
According to the referenced documentation, the IOMMU has 3 64-bit registers
consisting of a control register, base register and flush register.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Mark Cave-Ayland [Wed, 28 May 2014 07:28:21 +0000 (08:28 +0100)]
apb: Move IOMMU registers into a separate IOMMUState struct
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Mark Cave-Ayland [Sat, 24 May 2014 11:44:53 +0000 (12:44 +0100)]
tcx: move initialisation from realizefn to initfn
Initialisation cleanup as suggested by Andreas.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Andreas Färber <afaerber@suse.de>
Mark Cave-Ayland [Sat, 24 May 2014 11:19:44 +0000 (12:19 +0100)]
tcx: move initialisation from SysBusDevice class to TCX class realizefn
This is an intermediate step to bring TCX in line with CG3.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Andreas Färber <afaerber@suse.de>
Mark Cave-Ayland [Sat, 24 May 2014 10:51:50 +0000 (11:51 +0100)]
cg3: add extra check to prevent CG3 register array overflow
The case statements in the CG3 read and write register routines have a maximum
value of CG3_REG_SIZE, so if a value were written to this offset then it
would overflow the register array.
Currently this cannot be exploited since the MemoryRegion restricts accesses
to the range 0 ... CG3_REG_SIZE - 1, but it seems worth clarifying this for
future review and/or static analysis.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Paolo Bonzini <pbonzini@redhat.com>
Mark Cave-Ayland [Sat, 24 May 2014 10:42:36 +0000 (11:42 +0100)]
cg3: move initialisation from realizefn to initfn
Initialisation cleanup as suggested by Andreas.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Andreas Färber <afaerber@suse.de>
Peter Maydell [Thu, 5 Jun 2014 19:11:50 +0000 (20:11 +0100)]
Merge remote-tracking branch 'remotes/rth/tcg-next' into staging
* remotes/rth/tcg-next:
TCG: Fix tcg_gen_extr_i64_tl for 32bit
tcg: Remove TCG_TARGET_HAS_new_ldst
tci: Convert to new ldst opcodes
tcg-i386: Fix win64 qemu store
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 5 Jun 2014 18:16:28 +0000 (19:16 +0100)]
Merge remote-tracking branch 'remotes/kvm/uq/master' into staging
* remotes/kvm/uq/master:
kvm: Fix eax for cpuid leaf 0x40000000
kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation
kvm: Enable -cpu option to hide KVM
kvm: Ensure negative return value on kvm_init() error handling path
target-i386: set CC_OP to CC_OP_EFLAGS in cpu_load_eflags
target-i386: get CPL from SS.DPL
target-i386: rework CPL checks during task switch, preparing for next patch
target-i386: fix segment flags for SMM and VM86 mode
target-i386: Fix vm86 mode regression introduced in
fd460606fd6f.
kvm_stat: allow choosing between tracepoints and old stats
kvmclock: Ensure time in migration never goes backward
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 5 Jun 2014 17:58:53 +0000 (18:58 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-input-10' into staging
updates for docs/multiseat.txt
input: add support for kbd delays
# gpg: Signature made Wed 04 Jun 2014 08:22:39 BST using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-input-10:
docs/multiseat.txt: add note about spice
docs/multiseat.txt: gtk joined the party
docs/multiseat.txt: use autoseat
input/vnc: use kbd delays in press_key
input/curses: add kbd delay between keydown and keyup events
input: use kbd delays for send_key monitor command
input: add support for kbd delays
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Don Slutz [Mon, 5 May 2014 18:03:07 +0000 (14:03 -0400)]
qdev: Add test of qdev_prop_check_global
This will generate a warning from "make check":
...
GTESTER tests/test-qdev-global-props
Warning: "-global dynamic-prop-type-bad.prop3=103" not used
GTESTER tests/check-qom-interface
...
If the warning is not generated, the test will fail.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Don Slutz [Mon, 5 May 2014 18:03:06 +0000 (14:03 -0400)]
qdev: Display warning about unused -global
This can help a user understand why -global was ignored.
For example: with "-vga cirrus"; "-global vga.vgamem_mb=16" is just
ignored when "-global cirrus-vga.vgamem_mb=16" is not.
This is currently clear when the wrong property is provided:
out/x86_64-softmmu/qemu-system-x86_64 -global cirrus-vga.vram_size_mb=16 -monitor pty -vga cirrus
char device redirected to /dev/pts/20 (label compat_monitor0)
qemu-system-x86_64: Property '.vram_size_mb' not found
Aborted (core dumped)
vs
out/x86_64-softmmu/qemu-system-x86_64 -global vga.vram_size_mb=16 -monitor pty -vga cirrus
char device redirected to /dev/pts/20 (label compat_monitor0)
VNC server running on `::1:5900'
^Cqemu: terminating on signal 2
Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini [Tue, 27 May 2014 12:58:47 +0000 (14:58 +0200)]
target-i386: cleanup x86_cpu_get_phys_page_debug
Make the code a bit more similar to x86_cpu_handle_mmu_fault.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 27 May 2014 11:24:54 +0000 (13:24 +0200)]
target-i386: fix protection bits in the TLB for SMEP
User pages must be marked as non-executable when running under SMEP;
otherwise, fetching the page first and then calling it will fail.
With this patch, all SMEP testcases in kvm-unit-tests now pass.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 27 May 2014 10:31:28 +0000 (12:31 +0200)]
target-i386: support long addresses for 4MB pages (PSE-36)
4MB pages can use 40-bit addresses by putting the higher 8 bits in bits
20-13 of the PDE. Bit 21 is reserved.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 27 May 2014 11:03:17 +0000 (13:03 +0200)]
target-i386: raise page fault for reserved bits in large pages
In large pages, bit 12 is for PAT, but bits starting at 13 are reserved.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 27 May 2014 11:58:46 +0000 (13:58 +0200)]
target-i386: unify reserved bits and NX bit check
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 27 May 2014 12:44:49 +0000 (14:44 +0200)]
target-i386: simplify pte/vaddr calculation
They can moved to after the dirty bit processing, and unified between
CR0.PG=1 and CR0.PG=0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 27 May 2014 10:58:36 +0000 (12:58 +0200)]
target-i386: raise page fault for reserved physical address bits
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 27 May 2014 10:39:23 +0000 (12:39 +0200)]
target-i386: test reserved PS bit on PML4Es
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 27 May 2014 10:16:08 +0000 (12:16 +0200)]
target-i386: set correct error code for reserved bit access
The correct error code is 9 (present, reserved), not 8.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 4 Apr 2014 06:12:28 +0000 (08:12 +0200)]
target-i386: introduce support for 1 GB pages
Given the simplifications to the code in the previous patches, this
is now very simple to do.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 4 Apr 2014 06:11:48 +0000 (08:11 +0200)]
target-i386: introduce do_check_protect label
This will help adding 1GB page support in the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 4 Apr 2014 06:04:18 +0000 (08:04 +0200)]
target-i386: tweak handling of PG_NX_MASK
Remove the tail of the PAE case, so that we can use "goto" in the
next patch to jump to the protection checks.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 4 Apr 2014 06:00:40 +0000 (08:00 +0200)]
target-i386: commonize checks for PAE and non-PAE
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 4 Apr 2014 05:57:02 +0000 (07:57 +0200)]
target-i386: commonize checks for 4MB and 4KB pages
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 4 Apr 2014 05:51:29 +0000 (07:51 +0200)]
target-i386: commonize checks for 2MB and 4KB pages
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 4 Apr 2014 06:19:55 +0000 (08:19 +0200)]
target-i386: fix coding standards in x86_cpu_handle_mmu_fault
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 28 Mar 2014 10:49:20 +0000 (11:49 +0100)]
target-i386: simplify SMAP handling in MMU_KSMAP_IDX
Do not use this MMU index at all if CR4.SMAP is false, and drop
the SMAP check from x86_cpu_handle_mmu_fault.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 28 Mar 2014 10:43:45 +0000 (11:43 +0100)]
target-i386: fix kernel accesses with SMAP and CPL = 3
With SMAP, implicit kernel accesses from user mode always behave as
if AC=0. To do this, kernel mode is not anymore a separate MMU mode.
Instead, KERNEL_IDX is renamed to KSMAP_IDX and the kernel mode accessors
wrap KSMAP_IDX and KNOSMAP_IDX.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 28 Mar 2014 17:47:57 +0000 (18:47 +0100)]
target-i386: move check_io helpers to seg_helper.c
Prepare for adding _kernel accessors there in the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 28 Mar 2014 10:28:38 +0000 (11:28 +0100)]
target-i386: rename KSMAP to KNOSMAP
This is the mode where SMAP is overridden, put "NO" in its name.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 28 Mar 2014 18:11:26 +0000 (19:11 +0100)]
softmmu: move all load/store functions to cpu_ldst.h
Unify pieces of cpu-all.h, exec-all.h, softmmu_exec.h and tcg/tcg.h
into a single new header file with all helpers.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 28 Mar 2014 18:42:10 +0000 (19:42 +0100)]
softmmu: introduce cpu_ldst.h
This will collect all load and store helpers soon. For now
it is just a replacement for softmmu_exec.h, which this patch
stops including directly, but we also include it where this will
be necessary in order to simplify the next patch.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 28 Mar 2014 18:09:49 +0000 (19:09 +0100)]
target-arm: move arm_*_code to a separate file
These will soon require cpu_ldst.h, so move them out of cpu.h.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 28 Mar 2014 17:00:25 +0000 (18:00 +0100)]
softmmu: move softmmu_template.h out of include/
It is only included in cputlb.c now.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 28 Mar 2014 16:55:24 +0000 (17:55 +0100)]
softmmu: commonize helper definitions
They do not need to be in op_helper.c. Because cputlb.c now includes
softmmu_template.h twice for each size, io_readX must be elided the
second time through.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 28 Mar 2014 16:48:12 +0000 (17:48 +0100)]
softmmu: move ALIGNED_ONLY to cpu.h
Prepare for moving softmmu_header.h inclusion out of .c files
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 28 Mar 2014 17:14:58 +0000 (18:14 +0100)]
softmmu: make do_unaligned_access a method of CPU
We will reference it from more files in the next patch. To avoid
ruining the small steps we're making towards multi-target, make
it a method of CPU rather than just a global.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 28 Mar 2014 10:19:35 +0000 (11:19 +0100)]
softmmu: move definition of CPU_MMU_INDEX to inclusion site, drop ACCESS_TYPE
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 28 Mar 2014 10:18:14 +0000 (11:18 +0100)]
softmmu: move MMUSUFFIX under SOFTMMU_CODE_ACCESS
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 28 Mar 2014 10:15:30 +0000 (11:15 +0100)]
softmmu: start introducing SOFTMMU_CODE_ACCESS in softmmu_header.h
This preprocessor symbol is already used in softmmu_template.h. We
will use it to distinguish the two "fake" ACCESS_TYPEs
NB_MMU_MODES and NB_MMU_MODES + 1.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 28 Mar 2014 17:43:14 +0000 (18:43 +0100)]
hw: use ld_p/st_p instead of ld_raw/st_raw
The ld_raw and st_raw definitions are only needed in code that
must compile for both user-mode and softmmu emulation. Device
models can use the equivalent ld_p/st_p which are simple
pointer accessors.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 12 May 2014 08:03:05 +0000 (10:03 +0200)]
nseries: clean up coding style
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Weil [Mon, 28 Apr 2014 17:20:00 +0000 (19:20 +0200)]
cputlb: Fix regression with TCG interpreter (bug
1310324)
Commit
0f842f8a246f2b5b51a11c13f933bf7a90ae8e96 replaced GETPC_EXT() which
was derived from GETPC() by GETRA_EXT() without fixing cputlb.c. A later
patch replaced GETRA_EXT() by GETRA() in exec/softmmu_template.h which
is included in cputlb.c.
The TCG interpreter failed because the values returned by GETRA() were no
longer explicitly set to 0. The redefinition of GETRA() introduced here
fixes this.
In addition, GETPC_ADJ which is also used in exec/softmmu_template.h is
set to 0. Both changes reduce the compiled code size for cputlb.c by more
than 100 bytes, so the normal TCG without interpreter also profits from
the reduced code size and slightly faster code.
Cc: qemu-stable@nongnu.org
Reported-by: Giovanni Mascellani <gio@debian.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alexander Graf [Wed, 4 Jun 2014 21:09:11 +0000 (23:09 +0200)]
TCG: Fix tcg_gen_extr_i64_tl for 32bit
We expose a generic helper "tcg_gen_extr_i64_tl" for 64bit targets, but the
same function for 32bit targets is a misnomer and refers to an invalid function
name.
Fix up the definition to point to the correct internal helper names instead.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Thu, 29 May 2014 20:57:57 +0000 (13:57 -0700)]
tcg: Remove TCG_TARGET_HAS_new_ldst
Since all backends have been converted, remove the compatibility code.
Acked-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Tue, 27 May 2014 03:59:16 +0000 (20:59 -0700)]
tci: Convert to new ldst opcodes
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 28 May 2014 21:01:44 +0000 (14:01 -0700)]
tcg-i386: Fix win64 qemu store
The first non-register argument isn't placed at offset 0.
Cc: qemu-stable@nongnu.org
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Jidong Xiao [Wed, 4 Jun 2014 01:10:06 +0000 (21:10 -0400)]
kvm: Fix eax for cpuid leaf 0x40000000
Since Linux kernel 3.5, KVM has documented eax for leaf 0x40000000
to be KVM_CPUID_FEATURES:
https://github.com/torvalds/linux/commit/
57c22e5f35aa4b9b2fe11f73f3e62bbf9ef36190
But qemu still tries to set it to 0. It would be better to make qemu
and kvm consistent. This patch just fixes this issue.
Signed-off-by: Jidong Xiao <jidong.xiao@gmail.com>
[Include kvm_base in the value. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gerd Hoffmann [Mon, 2 Jun 2014 13:48:41 +0000 (15:48 +0200)]
docs/multiseat.txt: add note about spice
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Mon, 2 Jun 2014 13:39:54 +0000 (15:39 +0200)]
docs/multiseat.txt: gtk joined the party
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Mon, 26 May 2014 07:52:48 +0000 (09:52 +0200)]
docs/multiseat.txt: use autoseat
When using the autoseat feature of systemd/logind we'll only need
a single udev rule for the pci bridge, which simplifies the guest
setup a bit.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Mon, 2 Jun 2014 11:15:05 +0000 (13:15 +0200)]
input/vnc: use kbd delays in press_key
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 28 May 2014 11:05:04 +0000 (13:05 +0200)]
input/curses: add kbd delay between keydown and keyup events
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 28 May 2014 11:03:37 +0000 (13:03 +0200)]
input: use kbd delays for send_key monitor command
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 28 May 2014 11:02:40 +0000 (13:02 +0200)]
input: add support for kbd delays
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gonglei [Mon, 19 May 2014 07:26:03 +0000 (15:26 +0800)]
qga: Fix handle fd leak in acquire_privilege()
token should be closed in all conditions.
So move CloseHandle(token) to "out" branch.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Marcelo Tosatti [Tue, 3 Jun 2014 16:34:48 +0000 (13:34 -0300)]
kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation
Ensure proper env->tsc value for kvmclock_current_nsec calculation.
Reported-by: Marcin Gibuła <m.gibula@beyond.pl>
Cc: qemu-stable@nongnu.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alex Williamson [Mon, 2 Jun 2014 17:28:50 +0000 (11:28 -0600)]
kvm: Enable -cpu option to hide KVM
The latest Nvidia driver (337.88) specifically checks for KVM as the
hypervisor and reports Code 43 for the driver in a Windows guest when
found. Removing or changing the KVM signature is sufficient for the
driver to load and work. This patch adds an option to easily allow
the KVM hypervisor signature to be hidden using '-cpu kvm=off'. We
continue to expose KVM via the cpuid value by default. The state of
this option does not supercede or replace -enable-kvm or the accel=kvm
machine option. This only changes the visibility of KVM to the guest
and paravirtual features specifically tied to the KVM cpuid.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Tue, 3 Jun 2014 13:37:43 +0000 (14:37 +0100)]
Merge remote-tracking branch 'remotes/awilliam/tags/vfio-pci-for-qemu-
20140602.0' into staging
VFIO patches: realtek NIC quirk + SPAPR IOMMU AddressSpace support
# gpg: Signature made Mon 02 Jun 2014 22:44:42 BST using RSA key ID
3BB08B22
# gpg: Can't check signature: public key not found
* remotes/awilliam/tags/vfio-pci-for-qemu-
20140602.0:
vfio: Add guest side IOMMU support
vfio: Create VFIOAddressSpace objects as needed
vfio: Introduce VFIO address spaces
vfio: Rework to have error paths
vfio: Fix 128 bit handling
int128: Add int128_exts64()
memory: Sanity check that no listeners remain on a destroyed AddressSpace
vfio-pci: Quirk RTL8168 NIC
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 3 Jun 2014 10:59:48 +0000 (11:59 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-roms-3' into staging
seabios: update to 1.7.5 final
# gpg: Signature made Mon 02 Jun 2014 15:49:59 BST using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-roms-3:
seabios: update to 1.7.5 final
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 2 Jun 2014 16:07:21 +0000 (17:07 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-8' into staging
qtest: improve ehci/uhci test
usb: misc fixes, mostly for usb3/xhci
# gpg: Signature made Mon 02 Jun 2014 15:40:34 BST using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-usb-8:
xhci: order superspeed ports first
xhci: make port reset trace point more verbose
usb: add usb_pick_speed
usb-host: add HAVE_STREAMS define
usb-host: allow attaching usb3 devices to ehci
usb: improve ehci/uhci test
usb: move ehci register defines to header file
usb: add uhci port status reserved bit
usb: move uhci register defines to header file
qtest: fix qpci_config_writel
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 2 Jun 2014 15:10:12 +0000 (16:10 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-sdl-3' into staging
sdl2: add support for text consoles
# gpg: Signature made Mon 02 Jun 2014 15:35:20 BST using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-sdl-3:
sdl2: textinput + terminal
sdl2: make Ctrl-Alt-<nr> hotkeys show and hide windows
console: add kbd_put_string_console
console: add kbd_put_qcode_console
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gerd Hoffmann [Mon, 2 Jun 2014 14:49:00 +0000 (16:49 +0200)]
seabios: update to 1.7.5 final
git shortlog since -rc1:
Gerd Hoffmann (2):
acpi: remove PORT_ACPI_PM_BASE constant
Allow using full io region on q35.
Kevin O'Connor (2):
vgabios: Add debug message if x86emu leal check triggers.
python3 fixes for vgabios and csm builds.
Paolo Bonzini (1):
smm: remove code to handle ACPI disable/enable
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Peter Maydell [Mon, 2 Jun 2014 14:47:40 +0000 (15:47 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-vnc-3' into staging
misc minor vnc patches
# gpg: Signature made Mon 02 Jun 2014 15:31:53 BST using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-vnc-3:
vnc-enc-tight: Fix divide-by-zero in tight_detect_smooth_image{16,24,32}
vnc: add trace events for key events
vnc: refuse to set a password with VNC_AUTH_NONE
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gerd Hoffmann [Thu, 15 May 2014 10:42:16 +0000 (12:42 +0200)]
xhci: order superspeed ports first
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gonglei [Wed, 28 May 2014 13:21:35 +0000 (21:21 +0800)]
vnc-enc-tight: Fix divide-by-zero in tight_detect_smooth_image{16,24,32}
Spotted by Coverity:
(1) Event assignment: Assigning: "pixels" = "0".
(2) Event cond_true: Condition "y < h", taking true branch
(3) Event cond_false: Condition "x < w", taking false branch
(4) Event loop_end: Reached end of loop
(5) Event divide_by_zero: In expression "(stats[0] + stats[1]) * 100U / pixels",
division by expression "pixels" which may be zero has undefined behavior.
290 DEFINE_DETECT_FUNCTION(16)
291 DEFINE_DETECT_FUNCTION(32)
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 21 May 2014 11:18:20 +0000 (13:18 +0200)]
vnc: add trace events for key events
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 11 Dec 2013 12:15:37 +0000 (13:15 +0100)]
vnc: refuse to set a password with VNC_AUTH_NONE
Current code silently changes the authentication settings
in case you try to set a password without password authentication
turned on. This is bad. Return an error instead.
If we want allow changing auth settings at runtime this should
be done explicitly using a separate monitor command, not as
side effect of set_passwd.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 23 May 2014 13:44:42 +0000 (15:44 +0200)]
xhci: make port reset trace point more verbose
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 23 May 2014 14:20:54 +0000 (16:20 +0200)]
usb: add usb_pick_speed
We can pick the usb port speed in generic code, by looking at the port
and device speed masks and looking for the fastest match. So add a
function to do exactly that, and drop the speed setting code from
usb_desc_attach as it isn't needed any more.
This way we can set the device speed before calling port->ops->attach,
which fixes some xhci hotplug issues.
https://bugzilla.redhat.com/show_bug.cgi?id=
1046873
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 23 May 2014 09:26:52 +0000 (11:26 +0200)]
usb-host: add HAVE_STREAMS define
Gerd Hoffmann [Fri, 23 May 2014 08:27:00 +0000 (10:27 +0200)]
usb-host: allow attaching usb3 devices to ehci
Extend compatibility test function to also figure whenever usb3
devices can be supported on ehci. Tweak ep0 maxpacketsize field
due to usb2 <-> usb3 difference.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 7 May 2014 14:39:11 +0000 (16:39 +0200)]
usb: improve ehci/uhci test
* Attach usb devices to the bus.
* Check initial port status register state.
* Flip ehci initialization bit.
* Check port status register state again to
see whenever device handover to ehci worked.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Thu, 8 May 2014 10:15:23 +0000 (12:15 +0200)]
usb: move ehci register defines to header file
So we can easily use them in tests.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Thu, 8 May 2014 09:42:53 +0000 (11:42 +0200)]
usb: add uhci port status reserved bit
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Thu, 8 May 2014 08:58:44 +0000 (10:58 +0200)]
usb: move uhci register defines to header file
So we can easily use them in tests.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Thu, 8 May 2014 08:54:33 +0000 (10:54 +0200)]
qtest: fix qpci_config_writel
Found by Paolo.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Mon, 26 May 2014 12:05:51 +0000 (14:05 +0200)]
sdl2: textinput + terminal
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 27 May 2014 07:44:39 +0000 (09:44 +0200)]
sdl2: make Ctrl-Alt-<nr> hotkeys show and hide windows
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 27 May 2014 07:32:36 +0000 (09:32 +0200)]
console: add kbd_put_string_console
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>