OSDN Git Service
Greg Kroah-Hartman [Tue, 24 Apr 2018 08:42:34 +0000 (10:42 +0200)]
Merge 4.4.129 into android-4.4
Changes in 4.4.129
media: v4l2-compat-ioctl32: don't oops on overlay
parisc: Fix out of array access in match_pci_device()
perf intel-pt: Fix overlap detection to identify consecutive buffers correctly
perf intel-pt: Fix sync_switch
perf intel-pt: Fix error recovery from missing TIP packet
perf intel-pt: Fix timestamp following overflow
radeon: hide pointless #warning when compile testing
Revert "perf tests: Decompress kernel module before objdump"
block/loop: fix deadlock after loop_set_status
s390/qdio: don't retry EQBS after CCQ 96
s390/qdio: don't merge ERROR output buffers
s390/ipl: ensure loadparm valid flag is set
getname_kernel() needs to make sure that ->name != ->iname in long case
rtl8187: Fix NULL pointer dereference in priv->conf_mutex
hwmon: (ina2xx) Fix access to uninitialized mutex
cdc_ether: flag the Cinterion AHS8 modem by gemalto as WWAN
slip: Check if rstate is initialized before uncompressing
lan78xx: Correctly indicate invalid OTP
x86/hweight: Get rid of the special calling convention
x86/hweight: Don't clobber %rdi
tty: make n_tty_read() always abort if hangup is in progress
ubifs: Check ubifs_wbuf_sync() return code
ubi: fastmap: Don't flush fastmap work on detach
ubi: Fix error for write access
ubi: Reject MLC NAND
fs/reiserfs/journal.c: add missing resierfs_warning() arg
resource: fix integer overflow at reallocation
ipc/shm: fix use-after-free of shm file via remap_file_pages()
mm, slab: reschedule cache_reap() on the same CPU
usb: musb: gadget: misplaced out of bounds check
ARM: dts: at91: at91sam9g25: fix mux-mask pinctrl property
ARM: dts: at91: sama5d4: fix pinctrl compatible string
xen-netfront: Fix hang on device removal
regmap: Fix reversed bounds check in regmap_raw_write()
ACPI / video: Add quirk to force acpi-video backlight on Samsung 670Z5E
ACPI / hotplug / PCI: Check presence of slot itself in get_slot_status()
USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw
usb: dwc3: pci: Properly cleanup resource
HID: i2c-hid: fix size check and type usage
powerpc/powernv: Handle unknown OPAL errors in opal_nvram_write()
powerpc/64: Fix smp_wmb barrier definition use use lwsync consistently
powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops
powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops
HID: Fix hid_report_len usage
HID: core: Fix size as type u32
ASoC: ssm2602: Replace reg_default_raw with reg_default
thunderbolt: Resume control channel after hibernation image is created
random: use a tighter cap in credit_entropy_bits_safe()
jbd2: if the journal is aborted then don't allow update of the log tail
ext4: don't update checksum of new initialized bitmaps
ext4: fail ext4_iget for root directory if unallocated
RDMA/ucma: Don't allow setting RDMA_OPTION_IB_PATH without an RDMA device
ALSA: pcm: Fix UAF at PCM release via PCM timer access
IB/srp: Fix srp_abort()
IB/srp: Fix completion vector assignment algorithm
dmaengine: at_xdmac: fix rare residue corruption
um: Use POSIX ucontext_t instead of struct ucontext
iommu/vt-d: Fix a potential memory leak
mmc: jz4740: Fix race condition in IRQ mask update
clk: mvebu: armada-38x: add support for 1866MHz variants
clk: mvebu: armada-38x: add support for missing clocks
clk: bcm2835: De-assert/assert PLL reset signal when appropriate
thermal: imx: Fix race condition in imx_thermal_probe()
watchdog: f71808e_wdt: Fix WD_EN register read
ALSA: oss: consolidate kmalloc/memset 0 call to kzalloc
ALSA: pcm: Use ERESTARTSYS instead of EINTR in OSS emulation
ALSA: pcm: Avoid potential races between OSS ioctls and read/write
ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams
ALSA: pcm: Fix mutex unbalance in OSS emulation ioctls
ALSA: pcm: Fix endless loop for XRUN recovery in OSS emulation
vfio-pci: Virtualize PCIe & AF FLR
vfio/pci: Virtualize Maximum Payload Size
vfio/pci: Virtualize Maximum Read Request Size
ext4: don't allow r/w mounts if metadata blocks overlap the superblock
drm/radeon: Fix PCIe lane width calculation
ext4: fix crashes in dioread_nolock mode
ext4: fix deadlock between inline_data and ext4_expand_extra_isize_ea()
ALSA: line6: Use correct endpoint type for midi output
ALSA: rawmidi: Fix missing input substream checks in compat ioctls
ALSA: hda - New VIA controller suppor no-snoop path
HID: hidraw: Fix crash on HIDIOCGFEATURE with a destroyed device
MIPS: uaccess: Add micromips clobbers to bzero invocation
MIPS: memset.S: EVA & fault support for small_memset
MIPS: memset.S: Fix return of __clear_user from Lpartial_fixup
MIPS: memset.S: Fix clobber of v1 in last_fixup
powerpc/eeh: Fix enabling bridge MMIO windows
powerpc/lib: Fix off-by-one in alternate feature patching
jffs2_kill_sb(): deal with failed allocations
hypfs_kill_super(): deal with failed allocations
rpc_pipefs: fix double-dput()
Don't leak MNT_INTERNAL away from internal mounts
autofs: mount point create should honour passed in mode
mm: allow GFP_{FS,IO} for page_cache_read page cache allocation
mm/filemap.c: fix NULL pointer in page_cache_tree_insert()
ext4: bugfix for mmaped pages in mpage_release_unused_pages()
fanotify: fix logic of events on child
writeback: safer lock nesting
Linux 4.4.129
Change-Id: I8806d2cc92fe512f27a349e8f630ced0cac9a8d7
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Greg Kroah-Hartman [Tue, 24 Apr 2018 07:32:12 +0000 (09:32 +0200)]
Linux 4.4.129
Greg Thelen [Fri, 20 Apr 2018 21:55:42 +0000 (14:55 -0700)]
writeback: safer lock nesting
commit
2e898e4c0a3897ccd434adac5abb8330194f527b upstream.
lock_page_memcg()/unlock_page_memcg() use spin_lock_irqsave/restore() if
the page's memcg is undergoing move accounting, which occurs when a
process leaves its memcg for a new one that has
memory.move_charge_at_immigrate set.
unlocked_inode_to_wb_begin,end() use spin_lock_irq/spin_unlock_irq() if
the given inode is switching writeback domains. Switches occur when
enough writes are issued from a new domain.
This existing pattern is thus suspicious:
lock_page_memcg(page);
unlocked_inode_to_wb_begin(inode, &locked);
...
unlocked_inode_to_wb_end(inode, locked);
unlock_page_memcg(page);
If both inode switch and process memcg migration are both in-flight then
unlocked_inode_to_wb_end() will unconditionally enable interrupts while
still holding the lock_page_memcg() irq spinlock. This suggests the
possibility of deadlock if an interrupt occurs before unlock_page_memcg().
truncate
__cancel_dirty_page
lock_page_memcg
unlocked_inode_to_wb_begin
unlocked_inode_to_wb_end
<interrupts mistakenly enabled>
<interrupt>
end_page_writeback
test_clear_page_writeback
lock_page_memcg
<deadlock>
unlock_page_memcg
Due to configuration limitations this deadlock is not currently possible
because we don't mix cgroup writeback (a cgroupv2 feature) and
memory.move_charge_at_immigrate (a cgroupv1 feature).
If the kernel is hacked to always claim inode switching and memcg
moving_account, then this script triggers lockup in less than a minute:
cd /mnt/cgroup/memory
mkdir a b
echo 1 > a/memory.move_charge_at_immigrate
echo 1 > b/memory.move_charge_at_immigrate
(
echo $BASHPID > a/cgroup.procs
while true; do
dd if=/dev/zero of=/mnt/big bs=1M count=256
done
) &
while true; do
sync
done &
sleep 1h &
SLEEP=$!
while true; do
echo $SLEEP > a/cgroup.procs
echo $SLEEP > b/cgroup.procs
done
The deadlock does not seem possible, so it's debatable if there's any
reason to modify the kernel. I suggest we should to prevent future
surprises. And Wang Long said "this deadlock occurs three times in our
environment", so there's more reason to apply this, even to stable.
Stable 4.4 has minor conflicts applying this patch. For a clean 4.4 patch
see "[PATCH for-4.4] writeback: safer lock nesting"
https://lkml.org/lkml/2018/4/11/146
Wang Long said "this deadlock occurs three times in our environment"
[gthelen@google.com: v4]
Link: http://lkml.kernel.org/r/20180411084653.254724-1-gthelen@google.com
[akpm@linux-foundation.org: comment tweaks, struct initialization simplification]
Change-Id: Ibb773e8045852978f6207074491d262f1b3fb613
Link: http://lkml.kernel.org/r/20180410005908.167976-1-gthelen@google.com
Fixes:
682aa8e1a6a1 ("writeback: implement unlocked_inode_to_wb transaction and use it for stat updates")
Signed-off-by: Greg Thelen <gthelen@google.com>
Reported-by: Wang Long <wanglong19@meituan.com>
Acked-by: Wang Long <wanglong19@meituan.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org> [v4.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[natechancellor: Applied to 4.4 based on Greg's backport on lkml.org]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Goldstein [Wed, 4 Apr 2018 20:42:18 +0000 (23:42 +0300)]
fanotify: fix logic of events on child
commit
54a307ba8d3cd00a3902337ffaae28f436eeb1a4 upstream.
When event on child inodes are sent to the parent inode mark and
parent inode mark was not marked with FAN_EVENT_ON_CHILD, the event
will not be delivered to the listener process. However, if the same
process also has a mount mark, the event to the parent inode will be
delivered regadless of the mount mark mask.
This behavior is incorrect in the case where the mount mark mask does
not contain the specific event type. For example, the process adds
a mark on a directory with mask FAN_MODIFY (without FAN_EVENT_ON_CHILD)
and a mount mark with mask FAN_CLOSE_NOWRITE (without FAN_ONDIR).
A modify event on a file inside that directory (and inside that mount)
should not create a FAN_MODIFY event, because neither of the marks
requested to get that event on the file.
Fixes:
1968f5eed54c ("fanotify: use both marks when possible")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
[natechancellor: Fix small conflict due to lack of
3cd5eca8d7a2f]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wangguang [Thu, 15 Sep 2016 15:32:46 +0000 (11:32 -0400)]
ext4: bugfix for mmaped pages in mpage_release_unused_pages()
commit
4e800c0359d9a53e6bf0ab216954971b2515247f upstream.
Pages clear buffers after ext4 delayed block allocation failed,
However, it does not clean its pte_dirty flag.
if the pages unmap ,in cording to the pte_dirty ,
unmap_page_range may try to call __set_page_dirty,
which may lead to the bugon at
mpage_prepare_extent_to_map:head = page_buffers(page);.
This patch just call clear_page_dirty_for_io to clean pte_dirty
at mpage_release_unused_pages for pages mmaped.
Steps to reproduce the bug:
(1) mmap a file in ext4
addr = (char *)mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED,
fd, 0);
memset(addr, 'i', 4096);
(2) return EIO at
ext4_writepages->mpage_map_and_submit_extent->mpage_map_one_extent
which causes this log message to be print:
ext4_msg(sb, KERN_CRIT,
"Delayed block allocation failed for "
"inode %lu at logical offset %llu with"
" max blocks %u with error %d",
inode->i_ino,
(unsigned long long)map->m_lblk,
(unsigned)map->m_len, -err);
(3)Unmap the addr cause warning at
__set_page_dirty:WARN_ON_ONCE(warn && !PageUptodate(page));
(4) wait for a minute,then bugon happen.
Cc: stable@vger.kernel.org
Signed-off-by: wangguang <wangguang03@zte.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[@nathanchance: Resolved conflict from lack of
09cbfeaf1a5a6]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthew Wilcox [Fri, 20 Apr 2018 21:56:20 +0000 (14:56 -0700)]
mm/filemap.c: fix NULL pointer in page_cache_tree_insert()
commit
abc1be13fd113ddef5e2d807a466286b864caed3 upstream.
f2fs specifies the __GFP_ZERO flag for allocating some of its pages.
Unfortunately, the page cache also uses the mapping's GFP flags for
allocating radix tree nodes. It always masked off the __GFP_HIGHMEM
flag, and masks off __GFP_ZERO in some paths, but not all. That causes
radix tree nodes to be allocated with a NULL list_head, which causes
backtraces like:
__list_del_entry+0x30/0xd0
list_lru_del+0xac/0x1ac
page_cache_tree_insert+0xd8/0x110
The __GFP_DMA and __GFP_DMA32 flags would also be able to sneak through
if they are ever used. Fix them all by using GFP_RECLAIM_MASK at the
innermost location, and remove it from earlier in the callchain.
Link: http://lkml.kernel.org/r/20180411060320.14458-2-willy@infradead.org
Fixes:
449dd6984d0e ("mm: keep page cache radix tree nodes in check")
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reported-by: Chris Fries <cfries@google.com>
Debugged-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Hocko [Thu, 14 Jan 2016 23:20:12 +0000 (15:20 -0800)]
mm: allow GFP_{FS,IO} for page_cache_read page cache allocation
commit
c20cd45eb01748f0fba77a504f956b000df4ea73 upstream.
page_cache_read has been historically using page_cache_alloc_cold to
allocate a new page. This means that mapping_gfp_mask is used as the
base for the gfp_mask. Many filesystems are setting this mask to
GFP_NOFS to prevent from fs recursion issues. page_cache_read is called
from the vm_operations_struct::fault() context during the page fault.
This context doesn't need the reclaim protection normally.
ceph and ocfs2 which call filemap_fault from their fault handlers seem
to be OK because they are not taking any fs lock before invoking generic
implementation. xfs which takes XFS_MMAPLOCK_SHARED is safe from the
reclaim recursion POV because this lock serializes truncate and punch
hole with the page faults and it doesn't get involved in the reclaim.
There is simply no reason to deliberately use a weaker allocation
context when a __GFP_FS | __GFP_IO can be used. The GFP_NOFS protection
might be even harmful. There is a push to fail GFP_NOFS allocations
rather than loop within allocator indefinitely with a very limited
reclaim ability. Once we start failing those requests the OOM killer
might be triggered prematurely because the page cache allocation failure
is propagated up the page fault path and end up in
pagefault_out_of_memory.
We cannot play with mapping_gfp_mask directly because that would be racy
wrt. parallel page faults and it might interfere with other users who
really rely on NOFS semantic from the stored gfp_mask. The mask is also
inode proper so it would even be a layering violation. What we can do
instead is to push the gfp_mask into struct vm_fault and allow fs layer
to overwrite it should the callback need to be called with a different
allocation context.
Initialize the default to (mapping_gfp_mask | __GFP_FS | __GFP_IO)
because this should be safe from the page fault path normally. Why do
we care about mapping_gfp_mask at all then? Because this doesn't hold
only reclaim protection flags but it also might contain zone and
movability restrictions (GFP_DMA32, __GFP_MOVABLE and others) so we have
to respect those.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Kent [Fri, 20 Apr 2018 21:55:59 +0000 (14:55 -0700)]
autofs: mount point create should honour passed in mode
commit
1e6306652ba18723015d1b4967fe9de55f042499 upstream.
The autofs file system mkdir inode operation blindly sets the created
directory mode to S_IFDIR | 0555, ingoring the passed in mode, which can
cause selinux dac_override denials.
But the function also checks if the caller is the daemon (as no-one else
should be able to do anything here) so there's no point in not honouring
the passed in mode, allowing the daemon to set appropriate mode when
required.
Link: http://lkml.kernel.org/r/152361593601.8051.14014139124905996173.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Fri, 20 Apr 2018 02:03:08 +0000 (22:03 -0400)]
Don't leak MNT_INTERNAL away from internal mounts
commit
16a34adb9392b2fe4195267475ab5b472e55292c upstream.
We want it only for the stuff created by SB_KERNMOUNT mounts, *not* for
their copies. As it is, creating a deep stack of bindings of /proc/*/ns/*
somewhere in a new namespace and exiting yields a stack overflow.
Cc: stable@kernel.org
Reported-by: Alexander Aring <aring@mojatatu.com>
Bisected-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Tested-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Tested-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Tue, 3 Apr 2018 05:15:46 +0000 (01:15 -0400)]
rpc_pipefs: fix double-dput()
commit
4a3877c4cedd95543f8726b0a98743ed8db0c0fb upstream.
if we ever hit rpc_gssd_dummy_depopulate() dentry passed to
it has refcount equal to 1. __rpc_rmpipe() drops it and
dput() done after that hits an already freed dentry.
Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Tue, 3 Apr 2018 03:50:31 +0000 (23:50 -0400)]
hypfs_kill_super(): deal with failed allocations
commit
a24cd490739586a7d2da3549a1844e1d7c4f4fc4 upstream.
hypfs_fill_super() might fail to allocate sbi; hypfs_kill_super()
should not oops on that.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Tue, 3 Apr 2018 03:56:44 +0000 (23:56 -0400)]
jffs2_kill_sb(): deal with failed allocations
commit
c66b23c2840446a82c389e4cb1a12eb2a71fa2e4 upstream.
jffs2_fill_super() might fail to allocate jffs2_sb_info;
jffs2_kill_sb() must survive that.
Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Ellerman [Mon, 16 Apr 2018 13:25:19 +0000 (23:25 +1000)]
powerpc/lib: Fix off-by-one in alternate feature patching
commit
b8858581febb050688e276b956796bc4a78299ed upstream.
When we patch an alternate feature section, we have to adjust any
relative branches that branch out of the alternate section.
But currently we have a bug if we have a branch that points to past
the last instruction of the alternate section, eg:
FTR_SECTION_ELSE
1: b 2f
or 6,6,6
2:
ALT_FTR_SECTION_END(...)
nop
This will result in a relative branch at 1 with a target that equals
the end of the alternate section.
That branch does not need adjusting when it's moved to the non-else
location. Currently we do adjust it, resulting in a branch that goes
off into the link-time location of the else section, which is junk.
The fix is to not patch branches that have a target == end of the
alternate section.
Fixes:
d20fe50a7b3c ("KVM: PPC: Book3S HV: Branch inside feature section")
Fixes:
9b1a735de64c ("powerpc: Add logic to patch alternative feature sections")
Cc: stable@vger.kernel.org # v2.6.27+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Neuling [Wed, 11 Apr 2018 03:37:58 +0000 (13:37 +1000)]
powerpc/eeh: Fix enabling bridge MMIO windows
commit
13a83eac373c49c0a081cbcd137e79210fe78acd upstream.
On boot we save the configuration space of PCIe bridges. We do this so
when we get an EEH event and everything gets reset that we can restore
them.
Unfortunately we save this state before we've enabled the MMIO space
on the bridges. Hence if we have to reset the bridge when we come back
MMIO is not enabled and we end up taking an PE freeze when the driver
starts accessing again.
This patch forces the memory/MMIO and bus mastering on when restoring
bridges on EEH. Ideally we'd do this correctly by saving the
configuration space writes later, but that will have to come later in
a larger EEH rewrite. For now we have this simple fix.
The original bug can be triggered on a boston machine by doing:
echo 0x8000000000000000 > /sys/kernel/debug/powerpc/PCI0001/err_injct_outbound
On boston, this PHB has a PCIe switch on it. Without this patch,
you'll see two EEH events, 1 expected and 1 the failure we are fixing
here. The second EEH event causes the anything under the PHB to
disappear (i.e. the i40e eth).
With this patch, only 1 EEH event occurs and devices properly recover.
Fixes:
652defed4875 ("powerpc/eeh: Check PCIe link after reset")
Cc: stable@vger.kernel.org # v3.11+
Reported-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Redfearn [Tue, 17 Apr 2018 15:40:00 +0000 (16:40 +0100)]
MIPS: memset.S: Fix clobber of v1 in last_fixup
commit
c96eebf07692e53bf4dd5987510d8b550e793598 upstream.
The label .Llast_fixup\@ is jumped to on page fault within the final
byte set loop of memset (on < MIPSR6 architectures). For some reason, in
this fault handler, the v1 register is randomly set to a2 & STORMASK.
This clobbers v1 for the calling function. This can be observed with the
following test code:
static int __init __attribute__((optimize("O0"))) test_clear_user(void)
{
register int t asm("v1");
char *test;
int j, k;
pr_info("\n\n\nTesting clear_user\n");
test = vmalloc(PAGE_SIZE);
for (j = 256; j < 512; j++) {
t = 0xa5a5a5a5;
if ((k = clear_user(test + PAGE_SIZE - 256, j)) != j - 256) {
pr_err("clear_user (%px %d) returned %d\n", test + PAGE_SIZE - 256, j, k);
}
if (t != 0xa5a5a5a5) {
pr_err("v1 was clobbered to 0x%x!\n", t);
}
}
return 0;
}
late_initcall(test_clear_user);
Which demonstrates that v1 is indeed clobbered (MIPS64):
Testing clear_user
v1 was clobbered to 0x1!
v1 was clobbered to 0x2!
v1 was clobbered to 0x3!
v1 was clobbered to 0x4!
v1 was clobbered to 0x5!
v1 was clobbered to 0x6!
v1 was clobbered to 0x7!
Since the number of bytes that could not be set is already contained in
a2, the andi placing a value in v1 is not necessary and actively
harmful in clobbering v1.
Reported-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/19109/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Redfearn [Tue, 17 Apr 2018 14:52:21 +0000 (15:52 +0100)]
MIPS: memset.S: Fix return of __clear_user from Lpartial_fixup
commit
daf70d89f80c6e1772233da9e020114b1254e7e0 upstream.
The __clear_user function is defined to return the number of bytes that
could not be cleared. From the underlying memset / bzero implementation
this means setting register a2 to that number on return. Currently if a
page fault is triggered within the memset_partial block, the value
loaded into a2 on return is meaningless.
The label .Lpartial_fixup\@ is jumped to on page fault. In order to work
out how many bytes failed to copy, the exception handler should find how
many bytes left in the partial block (andi a2, STORMASK), add that to
the partial block end address (a2), and subtract the faulting address to
get the remainder. Currently it incorrectly subtracts the partial block
start address (t1), which has additionally been clobbered to generate a
jump target in memset_partial. Fix this by adding the block end address
instead.
This issue was found with the following test code:
int j, k;
for (j = 0; j < 512; j++) {
if ((k = clear_user(NULL, j)) != j) {
pr_err("clear_user (NULL %d) returned %d\n", j, k);
}
}
Which now passes on Creator Ci40 (MIPS32) and Cavium Octeon II (MIPS64).
Suggested-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/19108/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Redfearn [Thu, 29 Mar 2018 09:28:23 +0000 (10:28 +0100)]
MIPS: memset.S: EVA & fault support for small_memset
commit
8a8158c85e1e774a44fbe81106fa41138580dfd1 upstream.
The MIPS kernel memset / bzero implementation includes a small_memset
branch which is used when the region to be set is smaller than a long (4
bytes on 32bit, 8 bytes on 64bit). The current small_memset
implementation uses a simple store byte loop to write the destination.
There are 2 issues with this implementation:
1. When EVA mode is active, user and kernel address spaces may overlap.
Currently the use of the sb instruction means kernel mode addressing is
always used and an intended write to userspace may actually overwrite
some critical kernel data.
2. If the write triggers a page fault, for example by calling
__clear_user(NULL, 2), instead of gracefully handling the fault, an OOPS
is triggered.
Fix these issues by replacing the sb instruction with the EX() macro,
which will emit EVA compatible instuctions as required. Additionally
implement a fault fixup for small_memset which sets a2 to the number of
bytes that could not be cleared (as defined by __clear_user).
Reported-by: Chuanhua Lei <chuanhua.lei@intel.com>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/18975/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Redfearn [Tue, 17 Apr 2018 15:40:01 +0000 (16:40 +0100)]
MIPS: uaccess: Add micromips clobbers to bzero invocation
commit
b3d7e55c3f886493235bfee08e1e5a4a27cbcce8 upstream.
The micromips implementation of bzero additionally clobbers registers t7
& t8. Specify this in the clobbers list when invoking bzero.
Fixes:
26c5e07d1478 ("MIPS: microMIPS: Optimise 'memset' core library function.")
Reported-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.10+
Patchwork: https://patchwork.linux-mips.org/patch/19110/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rodrigo Rivas Costa [Thu, 5 Apr 2018 23:09:36 +0000 (01:09 +0200)]
HID: hidraw: Fix crash on HIDIOCGFEATURE with a destroyed device
commit
a955358d54695e4ad9f7d6489a7ac4d69a8fc711 upstream.
Doing `ioctl(HIDIOCGFEATURE)` in a tight loop on a hidraw device
and then disconnecting the device, or unloading the driver, can
cause a NULL pointer dereference.
When a hidraw device is destroyed it sets 0 to `dev->exist`.
Most functions check 'dev->exist' before doing its work, but
`hidraw_get_report()` was missing that check.
Cc: stable@vger.kernel.org
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Wang [Mon, 16 Apr 2018 09:48:09 +0000 (17:48 +0800)]
ALSA: hda - New VIA controller suppor no-snoop path
commit
af52f9982e410edac21ca4b49563053ffc9da1eb upstream.
This patch is used to tell kernel that new VIA HDAC controller also
support no-snoop path.
[ minor coding style fix by tiwai ]
Signed-off-by: David Wang <davidwang@zhaoxin.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 19 Apr 2018 16:16:15 +0000 (18:16 +0200)]
ALSA: rawmidi: Fix missing input substream checks in compat ioctls
commit
8a56ef4f3ffba9ebf4967b61ef600b0a7ba10f11 upstream.
Some rawmidi compat ioctls lack of the input substream checks
(although they do check only for rfile->output). This many eventually
lead to an Oops as NULL substream is passed to the rawmidi core
functions.
Fix it by adding the proper checks before each function call.
The bug was spotted by syzkaller.
Reported-by: syzbot+f7a0348affc3b67bc617@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabián Inostroza [Thu, 12 Apr 2018 03:37:35 +0000 (00:37 -0300)]
ALSA: line6: Use correct endpoint type for midi output
commit
7ecb46e9ee9af18e304eb9e7d6804c59a408e846 upstream.
Sending MIDI messages to a PODxt through the USB connection shows
"usb_submit_urb failed" in dmesg and the message is not received by
the POD.
The error is caused because in the funcion send_midi_async() in midi.c
there is a call to usb_sndbulkpipe() for endpoint 3 OUT, but the PODxt
USB descriptor shows that this endpoint it's an interrupt endpoint.
Patch tested with PODxt only.
[ The bug has been present from the very beginning in the staging
driver time, but Fixes below points to the commit moving to sound/
directory so that the fix can be cleanly applied -- tiwai ]
Fixes:
61864d844c29 ("ALSA: move line6 usb driver into sound/usb")
Signed-off-by: Fabián Inostroza <fabianinostroza@udec.cl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Thu, 12 Jan 2017 02:50:46 +0000 (21:50 -0500)]
ext4: fix deadlock between inline_data and ext4_expand_extra_isize_ea()
commit
c755e251357a0cee0679081f08c3f4ba797a8009 upstream.
The xattr_sem deadlock problems fixed in commit
2e81a4eeedca: "ext4:
avoid deadlock when expanding inode size" didn't include the use of
xattr_sem in fs/ext4/inline.c. With the addition of project quota
which added a new extra inode field, this exposed deadlocks in the
inline_data code similar to the ones fixed by
2e81a4eeedca.
The deadlock can be reproduced via:
dmesg -n 7
mke2fs -t ext4 -O inline_data -Fq -I 256 /dev/vdc 32768
mount -t ext4 -o debug_want_extra_isize=24 /dev/vdc /vdc
mkdir /vdc/a
umount /vdc
mount -t ext4 /dev/vdc /vdc
echo foo > /vdc/a/foo
and looks like this:
[ 11.158815]
[ 11.160276] =============================================
[ 11.161960] [ INFO: possible recursive locking detected ]
[ 11.161960]
4.10.0-rc3-00015-g011b30a8a3cf #160 Tainted: G W
[ 11.161960] ---------------------------------------------
[ 11.161960] bash/2519 is trying to acquire lock:
[ 11.161960] (&ei->xattr_sem){++++..}, at: [<
c1225a4b>] ext4_expand_extra_isize_ea+0x3d/0x4cd
[ 11.161960]
[ 11.161960] but task is already holding lock:
[ 11.161960] (&ei->xattr_sem){++++..}, at: [<
c1227941>] ext4_try_add_inline_entry+0x3a/0x152
[ 11.161960]
[ 11.161960] other info that might help us debug this:
[ 11.161960] Possible unsafe locking scenario:
[ 11.161960]
[ 11.161960] CPU0
[ 11.161960] ----
[ 11.161960] lock(&ei->xattr_sem);
[ 11.161960] lock(&ei->xattr_sem);
[ 11.161960]
[ 11.161960] *** DEADLOCK ***
[ 11.161960]
[ 11.161960] May be due to missing lock nesting notation
[ 11.161960]
[ 11.161960] 4 locks held by bash/2519:
[ 11.161960] #0: (sb_writers#3){.+.+.+}, at: [<
c11a2414>] mnt_want_write+0x1e/0x3e
[ 11.161960] #1: (&type->i_mutex_dir_key){++++++}, at: [<
c119508b>] path_openat+0x338/0x67a
[ 11.161960] #2: (jbd2_handle){++++..}, at: [<
c123314a>] start_this_handle+0x582/0x622
[ 11.161960] #3: (&ei->xattr_sem){++++..}, at: [<
c1227941>] ext4_try_add_inline_entry+0x3a/0x152
[ 11.161960]
[ 11.161960] stack backtrace:
[ 11.161960] CPU: 0 PID: 2519 Comm: bash Tainted: G W
4.10.0-rc3-00015-g011b30a8a3cf #160
[ 11.161960] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1 04/01/2014
[ 11.161960] Call Trace:
[ 11.161960] dump_stack+0x72/0xa3
[ 11.161960] __lock_acquire+0xb7c/0xcb9
[ 11.161960] ? kvm_clock_read+0x1f/0x29
[ 11.161960] ? __lock_is_held+0x36/0x66
[ 11.161960] ? __lock_is_held+0x36/0x66
[ 11.161960] lock_acquire+0x106/0x18a
[ 11.161960] ? ext4_expand_extra_isize_ea+0x3d/0x4cd
[ 11.161960] down_write+0x39/0x72
[ 11.161960] ? ext4_expand_extra_isize_ea+0x3d/0x4cd
[ 11.161960] ext4_expand_extra_isize_ea+0x3d/0x4cd
[ 11.161960] ? _raw_read_unlock+0x22/0x2c
[ 11.161960] ? jbd2_journal_extend+0x1e2/0x262
[ 11.161960] ? __ext4_journal_get_write_access+0x3d/0x60
[ 11.161960] ext4_mark_inode_dirty+0x17d/0x26d
[ 11.161960] ? ext4_add_dirent_to_inline.isra.12+0xa5/0xb2
[ 11.161960] ext4_add_dirent_to_inline.isra.12+0xa5/0xb2
[ 11.161960] ext4_try_add_inline_entry+0x69/0x152
[ 11.161960] ext4_add_entry+0xa3/0x848
[ 11.161960] ? __brelse+0x14/0x2f
[ 11.161960] ? _raw_spin_unlock_irqrestore+0x44/0x4f
[ 11.161960] ext4_add_nondir+0x17/0x5b
[ 11.161960] ext4_create+0xcf/0x133
[ 11.161960] ? ext4_mknod+0x12f/0x12f
[ 11.161960] lookup_open+0x39e/0x3fb
[ 11.161960] ? __wake_up+0x1a/0x40
[ 11.161960] ? lock_acquire+0x11e/0x18a
[ 11.161960] path_openat+0x35c/0x67a
[ 11.161960] ? sched_clock_cpu+0xd7/0xf2
[ 11.161960] do_filp_open+0x36/0x7c
[ 11.161960] ? _raw_spin_unlock+0x22/0x2c
[ 11.161960] ? __alloc_fd+0x169/0x173
[ 11.161960] do_sys_open+0x59/0xcc
[ 11.161960] SyS_open+0x1d/0x1f
[ 11.161960] do_int80_syscall_32+0x4f/0x61
[ 11.161960] entry_INT80_32+0x2f/0x2f
[ 11.161960] EIP: 0xb76ad469
[ 11.161960] EFLAGS:
00000286 CPU: 0
[ 11.161960] EAX:
ffffffda EBX:
08168ac8 ECX:
00008241 EDX:
000001b6
[ 11.161960] ESI:
b75e46bc EDI:
b7755000 EBP:
bfbdb108 ESP:
bfbdafc0
[ 11.161960] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b
Cc: stable@vger.kernel.org # 3.10 (requires 2e81a4eeedca as a prereq)
Reported-by: George Spelvin <linux@sciencehorizons.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 19 Feb 2016 05:33:21 +0000 (00:33 -0500)]
ext4: fix crashes in dioread_nolock mode
commit
74dae4278546b897eb81784fdfcce872ddd8b2b8 upstream.
Competing overwrite DIO in dioread_nolock mode will just overwrite
pointer to io_end in the inode. This may result in data corruption or
extent conversion happening from IO completion interrupt because we
don't properly set buffer_defer_completion() when unlocked DIO races
with locked DIO to unwritten extent.
Since unlocked DIO doesn't need io_end for anything, just avoid
allocating it and corrupting pointer from inode for locked DIO.
A cleaner fix would be to avoid these games with io_end pointer from the
inode but that requires more intrusive changes so we leave that for
later.
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Parsons [Sat, 2 Apr 2016 11:32:30 +0000 (12:32 +0100)]
drm/radeon: Fix PCIe lane width calculation
commit
85e290d92b4b794d0c758c53007eb4248d385386 upstream.
Two years ago I tried an AMD Radeon E8860 embedded GPU with the drm driver.
The dmesg output included driver warnings about an invalid PCIe lane width.
Tracking the problem back led to si_set_pcie_lane_width_in_smc().
The calculation of the lane widths via ATOM_PPLIB_PCIE_LINK_WIDTH_MASK and
ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT macros did not increment the resulting
value, per the comment in pptable.h ("lanes - 1"), and per usage elsewhere.
Applying the increment silenced the warnings.
The code has not changed since, so either my analysis was incorrect or the
bug has gone unnoticed. Hence submitting this as an RFC.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Fri, 30 Mar 2018 02:10:35 +0000 (22:10 -0400)]
ext4: don't allow r/w mounts if metadata blocks overlap the superblock
commit
18db4b4e6fc31eda838dd1c1296d67dbcb3dc957 upstream.
If some metadata block, such as an allocation bitmap, overlaps the
superblock, it's very likely that if the file system is mounted
read/write, the results will not be pretty. So disallow r/w mounts
for file systems corrupted in this particular way.
Backport notes:
3.18.y is missing
bc98a42c1f7d ("VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)")
and
e462ec50cb5f ("VFS: Differentiate mount flags (MS_*) from internal superblock flags")
so we simply use the sb MS_RDONLY check from pre
bc98a42c1f7d in place of the sb_rdonly
function used in the upstream variant of the patch.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Harsh Shandilya <harsh@prjkt.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Williamson [Mon, 2 Oct 2017 18:39:10 +0000 (12:39 -0600)]
vfio/pci: Virtualize Maximum Read Request Size
commit
cf0d53ba4947aad6e471491d5b20a567cbe92e56 upstream.
MRRS defines the maximum read request size a device is allowed to
make. Drivers will often increase this to allow more data transfer
with a single request. Completions to this request are bound by the
MPS setting for the bus. Aside from device quirks (none known), it
doesn't seem to make sense to set an MRRS value less than MPS, yet
this is a likely scenario given that user drivers do not have a
system-wide view of the PCI topology. Virtualize MRRS such that the
user can set MRRS >= MPS, but use MPS as the floor value that we'll
write to hardware.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Williamson [Mon, 2 Oct 2017 18:39:09 +0000 (12:39 -0600)]
vfio/pci: Virtualize Maximum Payload Size
commit
523184972b282cd9ca17a76f6ca4742394856818 upstream.
With virtual PCI-Express chipsets, we now see userspace/guest drivers
trying to match the physical MPS setting to a virtual downstream port.
Of course a lone physical device surrounded by virtual interconnects
cannot make a correct decision for a proper MPS setting. Instead,
let's virtualize the MPS control register so that writes through to
hardware are disallowed. Userspace drivers like QEMU assume they can
write anything to the device and we'll filter out anything dangerous.
Since mismatched MPS can lead to AER and other faults, let's add it
to the kernel side rather than relying on userspace virtualization to
handle it.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Williamson [Mon, 26 Sep 2016 19:52:16 +0000 (13:52 -0600)]
vfio-pci: Virtualize PCIe & AF FLR
commit
ddf9dc0eb5314d6dac8b19b1cc37c739c6896e7e upstream.
We use a BAR restore trick to try to detect when a user has performed
a device reset, possibly through FLR or other backdoors, to put things
back into a working state. This is important for backdoor resets, but
we can actually just virtualize the "front door" resets provided via
PCIe and AF FLR. Set these bits as virtualized + writable, allowing
the default write to set them in vconfig, then we can simply check the
bit, perform an FLR of our own, and clear the bit. We don't actually
have the granularity in PCI to specify the type of reset we want to
do, but generally devices don't implement both PCIe and AF FLR and
we'll favor these over other types of reset, so we should generally
lineup. We do test whether the device provides the requested FLR type
to stay consistent with hardware capabilities though.
This seems to fix several instance of devices getting into bad states
with userspace drivers, like dpdk, running inside a VM.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Greg Rose <grose@lightfleet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Sat, 7 Apr 2018 09:48:58 +0000 (11:48 +0200)]
ALSA: pcm: Fix endless loop for XRUN recovery in OSS emulation
commit
e15dc99dbb9cf99f6432e8e3c0b3a8f7a3403a86 upstream.
The commit
02a5d6925cd3 ("ALSA: pcm: Avoid potential races between OSS
ioctls and read/write") split the PCM preparation code to a locked
version, and it added a sanity check of runtime->oss.prepare flag
along with the change. This leaded to an endless loop when the stream
gets XRUN: namely, snd_pcm_oss_write3() and co call
snd_pcm_oss_prepare() without setting runtime->oss.prepare flag and
the loop continues until the PCM state reaches to another one.
As the function is supposed to execute the preparation
unconditionally, drop the invalid state check there.
The bug was triggered by syzkaller.
Fixes:
02a5d6925cd3 ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write")
Reported-by: syzbot+150189c103427d31a053@syzkaller.appspotmail.com
Reported-by: syzbot+7e3f31a52646f939c052@syzkaller.appspotmail.com
Reported-by: syzbot+4f2016cf5185da7759dc@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 27 Mar 2018 12:32:23 +0000 (14:32 +0200)]
ALSA: pcm: Fix mutex unbalance in OSS emulation ioctls
commit
f6d297df4dd47ef949540e4a201230d0c5308325 upstream.
The previous fix
40cab6e88cb0 ("ALSA: pcm: Return -EBUSY for OSS
ioctls changing busy streams") introduced some mutex unbalance; the
check of runtime->oss.rw_ref was inserted in a wrong place after the
mutex lock.
This patch fixes the inconsistency by rewriting with the helper
functions to lock/unlock parameters with the stream check.
Fixes:
40cab6e88cb0 ("ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 23 Mar 2018 07:03:26 +0000 (08:03 +0100)]
ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams
commit
40cab6e88cb0b6c56d3f30b7491a20e803f948f6 upstream.
OSS PCM stream management isn't modal but it allows ioctls issued at
any time for changing the parameters. In the previous hardening
patch ("ALSA: pcm: Avoid potential races between OSS ioctls and
read/write"), we covered these races and prevent the corruption by
protecting the concurrent accesses via params_lock mutex. However,
this means that some ioctls that try to change the stream parameter
(e.g. channels or format) would be blocked until the read/write
finishes, and it may take really long.
Basically changing the parameter while reading/writing is an invalid
operation, hence it's even more user-friendly from the API POV if it
returns -EBUSY in such a situation.
This patch adds such checks in the relevant ioctls with the addition
of read/write access refcount.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 22 Mar 2018 17:10:14 +0000 (18:10 +0100)]
ALSA: pcm: Avoid potential races between OSS ioctls and read/write
commit
02a5d6925cd34c3b774bdb8eefb057c40a30e870 upstream.
Although we apply the params_lock mutex to the whole read and write
operations as well as snd_pcm_oss_change_params(), we may still face
some races.
First off, the params_lock is taken inside the read and write loop.
This is intentional for avoiding the too long locking, but it allows
the in-between parameter change, which might lead to invalid
pointers. We check the readiness of the stream and set up via
snd_pcm_oss_make_ready() at the beginning of read and write, but it's
called only once, by assuming that it remains ready in the rest.
Second, many ioctls that may change the actual parameters
(i.e. setting runtime->oss.params=1) aren't protected, hence they can
be processed in a half-baked state.
This patch is an attempt to plug these holes. The stream readiness
check is moved inside the read/write inner loop, so that the stream is
always set up in a proper state before further processing. Also, each
ioctl that may change the parameter is wrapped with the params_lock
for avoiding the races.
The issues were triggered by syzkaller in a few different scenarios,
particularly the one below appearing as GPF in loopback_pos_update.
Reported-by: syzbot+c4227aec125487ec3efa@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 9 Jan 2018 07:51:02 +0000 (08:51 +0100)]
ALSA: pcm: Use ERESTARTSYS instead of EINTR in OSS emulation
commit
c64ed5dd9feba193c76eb460b451225ac2a0d87b upstream.
Fix the last standing EINTR in the whole subsystem. Use more correct
ERESTARTSYS for pending signals.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Mc Guire [Sat, 19 Dec 2015 14:23:13 +0000 (15:23 +0100)]
ALSA: oss: consolidate kmalloc/memset 0 call to kzalloc
commit
46325371b230cc66c743925c930a17e7d0b8211e upstream.
This is an API consolidation only. The use of kmalloc + memset to 0
is equivalent to kzalloc.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Igor Pylypiv [Wed, 7 Mar 2018 07:47:25 +0000 (23:47 -0800)]
watchdog: f71808e_wdt: Fix WD_EN register read
commit
977f6f68331f94bb72ad84ee96b7b87ce737d89d upstream.
F71808FG_FLAG_WD_EN defines bit position, not a bitmask
Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikhail Lappo [Fri, 2 Feb 2018 18:17:46 +0000 (16:17 -0200)]
thermal: imx: Fix race condition in imx_thermal_probe()
commit
cf1ba1d73a33944d8c1a75370a35434bf146b8a7 upstream.
When device boots with T > T_trip_1 and requests interrupt,
the race condition takes place. The interrupt comes before
THERMAL_DEVICE_ENABLED is set. This leads to an attempt to
reading sensor value from irq and disabling the sensor, based on
the data->mode field, which expected to be THERMAL_DEVICE_ENABLED,
but still stays as THERMAL_DEVICE_DISABLED. Afher this issue
sensor is never re-enabled, as the driver state is wrong.
Fix this problem by setting the 'data' members prior to
requesting the interrupts.
Fixes:
37713a1e8e4c ("thermal: imx: implement thermal alarm interrupt handling")
Cc: <stable@vger.kernel.org>
Signed-off-by: Mikhail Lappo <mikhail.lappo@esrlabs.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Boris Brezillon [Thu, 22 Mar 2018 09:11:30 +0000 (10:11 +0100)]
clk: bcm2835: De-assert/assert PLL reset signal when appropriate
commit
753872373b599384ac7df809aa61ea12d1c4d5d1 upstream.
In order to enable a PLL, not only the PLL has to be powered up and
locked, but you also have to de-assert the reset signal. The last part
was missing. Add it so PLLs that were not enabled by the FW/bootloader
can be enabled from Linux.
Fixes:
41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Genoud [Tue, 13 Mar 2018 15:27:02 +0000 (16:27 +0100)]
clk: mvebu: armada-38x: add support for missing clocks
commit
6a4a4595804548e173f0763a0e7274a3521c59a9 upstream.
Clearfog boards can come with a CPU clocked at 1600MHz (commercial)
or 1333MHz (industrial).
They have also some dip-switches to select a different clock (666, 800,
1066, 1200).
The funny thing is that the recovery button is on the MPP34 fq selector.
So, when booting an industrial board with this button down, the frequency
666MHz is selected (and the kernel didn't boot).
This patch add all the missing clocks.
The only mode I didn't test is 2GHz (uboot found 4294MHz instead :/ ).
Fixes:
0e85aeced4d6 ("clk: mvebu: add clock support for Armada 380/385")
Cc: <stable@vger.kernel.org> # 3.16.x: 9593f4f56cf5: clk: mvebu: armada-38x: add support for 1866MHz variants
Cc: <stable@vger.kernel.org> # 3.16.x
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ralph Sennhauser [Wed, 24 May 2017 14:58:52 +0000 (16:58 +0200)]
clk: mvebu: armada-38x: add support for 1866MHz variants
commit
9593f4f56cf5d1c443f66660a0c7f01de38f979d upstream.
The Linksys WRT3200ACM CPU is clocked at 1866MHz. Add 1866MHz to the
list of supported CPU frequencies. Also update multiplier and divisor
for the l2clk and ddrclk.
Noticed by the following warning:
[ 0.000000] Selected CPU frequency (16) unsupported
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Smith [Wed, 28 Mar 2018 21:00:43 +0000 (18:00 -0300)]
mmc: jz4740: Fix race condition in IRQ mask update
commit
a04f0017c22453613d5f423326b190c61e3b4f98 upstream.
A spinlock is held while updating the internal copy of the IRQ mask,
but not while writing it to the actual IMASK register. After the lock
is released, an IRQ can occur before the IMASK register is written.
If handling this IRQ causes the mask to be changed, when the handler
returns back to the middle of the first mask update, a stale value
will be written to the mask register.
If this causes an IRQ to become unmasked that cannot have its status
cleared by writing a 1 to it in the IREG register, e.g. the SDIO IRQ,
then we can end up stuck with the same IRQ repeatedly being fired but
not handled. Normally the MMC IRQ handler attempts to clear any
unexpected IRQs by writing IREG, but for those that cannot be cleared
in this way then the IRQ will just repeatedly fire.
This was resulting in lockups after a while of using Wi-Fi on the
CI20 (GitHub issue #19).
Resolve by holding the spinlock until after the IMASK register has
been updated.
Cc: stable@vger.kernel.org
Link: https://github.com/MIPS/CI20_linux/issues/19
Fixes:
61bfbdb85687 ("MMC: Add support for the controller on JZ4740 SoCs.")
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lu Baolu [Sat, 24 Feb 2018 05:42:27 +0000 (13:42 +0800)]
iommu/vt-d: Fix a potential memory leak
commit
bbe4b3af9d9e3172fb9aa1f8dcdfaedcb381fc64 upstream.
A memory block was allocated in intel_svm_bind_mm() but never freed
in a failure path. This patch fixes this by free it to avoid memory
leakage.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Fixes:
2f26e0a9c9860 ('iommu/vt-d: Add basic SVM PASID support')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Mazur [Wed, 15 Nov 2017 10:12:39 +0000 (11:12 +0100)]
um: Use POSIX ucontext_t instead of struct ucontext
commit
4d1a535b8ec5e74b42dfd9dc809142653b2597f6 upstream.
glibc 2.26 removed the 'struct ucontext' to "improve" POSIX compliance
and break programs, including User Mode Linux. Fix User Mode Linux
by using POSIX ucontext_t.
This fixes:
arch/um/os-Linux/signal.c: In function 'hard_handler':
arch/um/os-Linux/signal.c:163:22: error: dereferencing pointer to incomplete type 'struct ucontext'
mcontext_t *mc = &uc->uc_mcontext;
arch/x86/um/stub_segv.c: In function 'stub_segv_handler':
arch/x86/um/stub_segv.c:16:13: error: dereferencing pointer to incomplete type 'struct ucontext'
&uc->uc_mcontext);
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxime Jayat [Thu, 22 Feb 2018 11:39:55 +0000 (12:39 +0100)]
dmaengine: at_xdmac: fix rare residue corruption
commit
c5637476bbf9bb86c7f0413b8f4822a73d8d2d07 upstream.
Despite the efforts made to correctly read the NDA and CUBC registers,
the order in which the registers are read could sometimes lead to an
inconsistent state.
Re-using the timeline from the comments, this following timing of
registers reads could lead to reading NDA with value "@desc2" and
CUBC with value "MAX desc1":
INITD -------- ------------
|____________________|
_______________________ _______________
NDA @desc2 \/ @desc3
_______________________/\_______________
__________ ___________ _______________
CUBC 0 \/ MAX desc1 \/ MAX desc2
__________/\___________/\_______________
| | | |
Events:(1)(2) (3)(4)
(1) check_nda = @desc2
(2) initd = 1
(3) cur_ubc = MAX desc1
(4) cur_nda = @desc2
This is allowed by the condition ((check_nda == cur_nda) && initd),
despite cur_ubc and cur_nda being in the precise state we don't want.
This error leads to incorrect residue computation.
Fix it by inversing the order in which CUBC and INITD are read. This
makes sure that NDA and CUBC are always read together either _before_
INITD goes to 0 or _after_ it is back at 1.
The case where NDA is read before INITD is at 0 and CUBC is read after
INITD is back at 1 will be rejected by check_nda and cur_nda being
different.
Fixes:
53398f488821 ("dmaengine: at_xdmac: fix residue corruption")
Cc: stable@vger.kernel.org
Signed-off-by: Maxime Jayat <maxime.jayat@mobile-devices.fr>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Mon, 12 Feb 2018 17:50:25 +0000 (09:50 -0800)]
IB/srp: Fix completion vector assignment algorithm
commit
3a148896b24adf8688dc0c59af54531931677a40 upstream.
Ensure that cv_end is equal to ibdev->num_comp_vectors for the
NUMA node with the highest index. This patch improves spreading
of RDMA channels over completion vectors and thereby improves
performance, especially on systems with only a single NUMA node.
This patch drops support for the comp_vector login parameter by
ignoring the value of that parameter since I have not found a
good way to combine support for that parameter and automatic
spreading of RDMA channels over completion vectors.
Fixes:
d92c0da71a35 ("IB/srp: Add multichannel support")
Reported-by: Alexander Schmid <alex@modula-shop-systems.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Alexander Schmid <alex@modula-shop-systems.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Fri, 23 Feb 2018 22:09:24 +0000 (14:09 -0800)]
IB/srp: Fix srp_abort()
commit
e68088e78d82920632eba112b968e49d588d02a2 upstream.
Before commit
e494f6a72839 ("[SCSI] improved eh timeout handler") it
did not really matter whether or not abort handlers like srp_abort()
called .scsi_done() when returning another value than SUCCESS. Since
that commit however this matters. Hence only call .scsi_done() when
returning SUCCESS.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Mon, 2 Apr 2018 20:41:43 +0000 (22:41 +0200)]
ALSA: pcm: Fix UAF at PCM release via PCM timer access
commit
a820ccbe21e8ce8e86c39cd1d3bc8c7d1cbb949b upstream.
The PCM runtime object is created and freed dynamically at PCM stream
open / close time. This is tracked via substream->runtime, and it's
cleared at snd_pcm_detach_substream().
The runtime object assignment is protected by PCM open_mutex, so for
all PCM operations, it's safely handled. However, each PCM substream
provides also an ALSA timer interface, and user-space can access to
this while closing a PCM substream. This may eventually lead to a
UAF, as snd_pcm_timer_resolution() tries to access the runtime while
clearing it in other side.
Fortunately, it's the only concurrent access from the PCM timer, and
it merely reads runtime->timer_resolution field. So, we can avoid the
race by reordering kfree() and wrapping the substream->runtime
clearance with the corresponding timer lock.
Reported-by: syzbot+8e62ff4e07aa2ce87826@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roland Dreier [Tue, 3 Apr 2018 22:33:01 +0000 (15:33 -0700)]
RDMA/ucma: Don't allow setting RDMA_OPTION_IB_PATH without an RDMA device
commit
8435168d50e66fa5eae01852769d20a36f9e5e83 upstream.
Check to make sure that ctx->cm_id->device is set before we use it.
Otherwise userspace can trigger a NULL dereference by doing
RDMA_USER_CM_CMD_SET_OPTION on an ID that is not bound to a device.
Cc: <stable@vger.kernel.org>
Reported-by: <syzbot+a67bc93e14682d92fc2f@syzkaller.appspotmail.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Fri, 30 Mar 2018 01:56:09 +0000 (21:56 -0400)]
ext4: fail ext4_iget for root directory if unallocated
commit
8e4b5eae5decd9dfe5a4ee369c22028f90ab4c44 upstream.
If the root directory has an i_links_count of zero, then when the file
system is mounted, then when ext4_fill_super() notices the problem and
tries to call iput() the root directory in the error return path,
ext4_evict_inode() will try to free the inode on disk, before all of
the file system structures are set up, and this will result in an OOPS
caused by a NULL pointer dereference.
This issue has been assigned CVE-2018-1092.
https://bugzilla.kernel.org/show_bug.cgi?id=199179
https://bugzilla.redhat.com/show_bug.cgi?id=
1560777
Reported-by: Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Mon, 19 Feb 2018 19:16:47 +0000 (14:16 -0500)]
ext4: don't update checksum of new initialized bitmaps
commit
044e6e3d74a3d7103a0c8a9305dfd94d64000660 upstream.
When reading the inode or block allocation bitmap, if the bitmap needs
to be initialized, do not update the checksum in the block group
descriptor. That's because we're not set up to journal those changes.
Instead, just set the verified bit on the bitmap block, so that it's
not necessary to validate the checksum.
When a block or inode allocation actually happens, at that point the
checksum will be calculated, and update of the bg descriptor block
will be properly journalled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Mon, 19 Feb 2018 17:22:53 +0000 (12:22 -0500)]
jbd2: if the journal is aborted then don't allow update of the log tail
commit
85e0c4e89c1b864e763c4e3bb15d0b6d501ad5d9 upstream.
This updates the jbd2 superblock unnecessarily, and on an abort we
shouldn't truncate the log.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Sat, 25 Feb 2017 22:21:33 +0000 (18:21 -0400)]
random: use a tighter cap in credit_entropy_bits_safe()
commit
9f886f4d1d292442b2f22a0a33321eae821bde40 upstream.
This fixes a harmless UBSAN where root could potentially end up
causing an overflow while bumping the entropy_total field (which is
ignored once the entropy pool has been initialized, and this generally
is completed during the boot sequence).
This is marginal for the stable kernel series, but it's a really
trivial patch, and it fixes UBSAN warning that might cause security
folks to get overly excited for no reason.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Chen Feng <puck.chen@hisilicon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Westerberg [Tue, 19 Dec 2017 09:44:56 +0000 (12:44 +0300)]
thunderbolt: Resume control channel after hibernation image is created
commit
f2a659f7d8d5da803836583aa16df06bdf324252 upstream.
The driver misses implementation of PM hook that undoes what
->freeze_noirq() does after the hibernation image is created. This means
the control channel is not resumed properly and the Thunderbolt bus
becomes useless in later stages of hibernation (when the image is stored
or if the operation fails).
Fix this by pointing ->thaw_noirq to driver nhi_resume_noirq(). This
makes sure the control channel is resumed properly.
Fixes:
23dd5bb49d98 ("thunderbolt: Add suspend/hibernate support")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Kelly [Mon, 19 Mar 2018 10:29:50 +0000 (21:29 +1100)]
ASoC: ssm2602: Replace reg_default_raw with reg_default
commit
a01df75ce737951ad13a08d101306e88c3f57cb2 upstream.
SSM2602 driver is broken on recent kernels (at least
since 4.9). User space applications such as amixer or
alsamixer get EIO when attempting to access codec
controls via the relevant IOCTLs.
Root cause of these failures is the regcache_hw_init
function in drivers/base/regmap/regcache.c, which
prevents regmap cache initalization from the
reg_defaults_raw element of the regmap_config structure
when registers are write only. It also disables the
regmap cache entirely when all registers are write only
or volatile as is the case for the SSM2602 driver.
Using the reg_defaults element of the regmap_config
structure rather than the reg_defaults_raw element to
initalize the regmap cache avoids the logic in the
regcache_hw_init function entirely. It also makes this
driver consistent with other ASoC codec drivers, as
this driver was the ONLY codec driver that used the
reg_defaults_raw element to initalize the cache.
Tested on Digilent Zybo Z7 development board which has
a SSM2603 codec chip connected to a Xilinx Zynq SoC.
Signed-off-by: James Kelly <jamespeterkelly@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaron Ma [Mon, 8 Jan 2018 02:41:41 +0000 (10:41 +0800)]
HID: core: Fix size as type u32
commit
6de0b13cc0b4ba10e98a9263d7a83b940720b77a upstream.
When size is negative, calling memset will make segment fault.
Declare the size as type u32 to keep memset safe.
size in struct hid_report is unsigned, fix return type of
hid_report_len to u32.
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaron Ma [Sat, 3 Feb 2018 15:57:15 +0000 (23:57 +0800)]
HID: Fix hid_report_len usage
commit
3064a03b94e60388f0955fcc29f3e8a978d28f75 upstream.
Follow the change of return type u32 of hid_report_len,
fix all the types of variables those get the return value of
hid_report_len to u32, and all other code already uses u32.
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Piggin [Tue, 10 Apr 2018 11:49:33 +0000 (21:49 +1000)]
powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops
commit
3b8070335f751aac9f1526ae2e012e6f5b8b0f21 upstream.
The OPAL NVRAM driver does not sleep in case it gets OPAL_BUSY or
OPAL_BUSY_EVENT from firmware, which causes large scheduling
latencies, and various lockup errors to trigger (again, BMC reboot
can cause it).
Fix this by converting it to the standard form OPAL_BUSY loop that
sleeps.
Fixes:
628daa8d5abf ("powerpc/powernv: Add RTC and NVRAM support plus RTAS fallbacks")
Depends-on:
34dd25de9fe3 ("powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops")
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Piggin [Tue, 10 Apr 2018 11:49:31 +0000 (21:49 +1000)]
powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops
commit
34dd25de9fe3f60bfdb31b473bf04b28262d0896 upstream.
This is the start of an effort to tidy up and standardise all the
delays. Existing loops have a range of delay/sleep periods from 1ms
to 20ms, and some have no delay. They all loop forever except rtc,
which times out after 10 retries, and that uses 10ms delays. So use
10ms as our standard delay. The OPAL maintainer agrees 10ms is a
reasonable starting point.
The idea is to use the same recipe everywhere, once this is proven to
work then it will be documented as an OPAL API standard. Then both
firmware and OS can agree, and if a particular call needs something
else, then that can be documented with reasoning.
This is not the end-all of this effort, it's just a relatively easy
change that fixes some existing high latency delays. There should be
provision for standardising timeouts and/or interruptible loops where
possible, so non-fatal firmware errors don't cause hangs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Piggin [Thu, 22 Mar 2018 10:41:46 +0000 (20:41 +1000)]
powerpc/64: Fix smp_wmb barrier definition use use lwsync consistently
commit
0bfdf598900fd62869659f360d3387ed80eb71cf upstream.
asm/barrier.h is not always included after asm/synch.h, which meant
it was missing __SUBARCH_HAS_LWSYNC, so in some files smp_wmb() would
be eieio when it should be lwsync. kernel/time/hrtimer.c is one case.
__SUBARCH_HAS_LWSYNC is only used in one place, so just fold it in
to where it's used. Previously with my small simulator config, 377
instances of eieio in the tree. After this patch there are 55.
Fixes:
46d075be585e ("powerpc: Optimise smp_wmb")
Cc: stable@vger.kernel.org # v2.6.29+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Piggin [Mon, 26 Mar 2018 15:02:33 +0000 (01:02 +1000)]
powerpc/powernv: Handle unknown OPAL errors in opal_nvram_write()
commit
741de617661794246f84a21a02fc5e327bffc9ad upstream.
opal_nvram_write currently just assumes success if it encounters an
error other than OPAL_BUSY or OPAL_BUSY_EVENT. Have it return -EIO
on other errors instead.
Fixes:
628daa8d5abf ("powerpc/powernv: Add RTC and NVRAM support plus RTAS fallbacks")
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Acked-by: Stewart Smith <stewart@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaron Ma [Mon, 8 Jan 2018 02:41:40 +0000 (10:41 +0800)]
HID: i2c-hid: fix size check and type usage
commit
ac75a041048b8c1f7418e27621ca5efda8571043 upstream.
When convert char array with signed int, if the inbuf[x] is negative then
upper bits will be set to 1. Fix this by using u8 instead of char.
ret_size has to be at least 3, hid_input_report use it after minus 2 bytes.
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thinh Nguyen [Mon, 19 Mar 2018 20:07:35 +0000 (13:07 -0700)]
usb: dwc3: pci: Properly cleanup resource
commit
cabdf83dadfb3d83eec31e0f0638a92dbd716435 upstream.
Platform device is allocated before adding resources. Make sure to
properly cleanup on error case.
Cc: <stable@vger.kernel.org>
Fixes:
f1c7e7108109 ("usb: dwc3: convert to pcim_enable_device()")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhengjun Xing [Wed, 21 Mar 2018 05:29:42 +0000 (13:29 +0800)]
USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw
commit
64627388b50158fd24d6ad88132525b95a5ef573 upstream.
USB3 hubs don't support global suspend.
USB3 specification 10.10, Enhanced SuperSpeed hubs only support selective
suspend and resume, they do not support global suspend/resume where the
hub downstream facing ports states are not affected.
When system enters hibernation it first enters freeze process where only
the root hub enters suspend, usb_port_suspend() is not called for other
devices, and suspend status flags are not set for them. Other devices are
expected to suspend globally. Some external USB3 hubs will suspend the
downstream facing port at global suspend. These devices won't be resumed
at thaw as the suspend status flag is not set.
A USB3 removable hard disk connected through a USB3 hub that won't resume
at thaw will fail to synchronize SCSI cache, return “cmd cmplt err -71”
error, and needs a 60 seconds timeout which causing system hang for 60s
before the USB host reset the port for the USB3 removable hard disk to
recover.
Fix this by always calling usb_port_suspend() during freeze for USB3
devices.
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Westerberg [Mon, 12 Feb 2018 10:55:23 +0000 (13:55 +0300)]
ACPI / hotplug / PCI: Check presence of slot itself in get_slot_status()
commit
13d3047c81505cc0fb9bdae7810676e70523c8bf upstream.
Mike Lothian reported that plugging in a USB-C device does not work
properly in his Dell Alienware system. This system has an Intel Alpine
Ridge Thunderbolt controller providing USB-C functionality. In these
systems the USB controller (xHCI) is hotplugged whenever a device is
connected to the port using ACPI-based hotplug.
The ACPI description of the root port in question is as follows:
Device (RP01)
{
Name (_ADR, 0x001C0000)
Device (PXSX)
{
Name (_ADR, 0x02)
Method (_RMV, 0, NotSerialized)
{
// ...
}
}
Here _ADR 0x02 means device 0, function 2 on the bus under root port (RP01)
but that seems to be incorrect because device 0 is the upstream port of the
Alpine Ridge PCIe switch and it has no functions other than 0 (the bridge
itself). When we get ACPI Notify() to the root port resulting from
connecting a USB-C device, Linux tries to read PCI_VENDOR_ID from device 0,
function 2 which of course always returns 0xffffffff because there is no
such function and we never find the device.
In Windows this works fine.
Now, since we get ACPI Notify() to the root port and not to the PXSX device
we should actually start our scan from there as well and not from the
non-existent PXSX device. Fix this by checking presence of the slot itself
(function 0) if we fail to do that otherwise.
While there use pci_bus_read_dev_vendor_id() in get_slot_status(), which is
the recommended way to read Device and Vendor IDs of devices on PCI buses.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198557
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Mon, 19 Mar 2018 17:01:45 +0000 (18:01 +0100)]
ACPI / video: Add quirk to force acpi-video backlight on Samsung 670Z5E
commit
bbf038618a24d72e2efc19146ef421bb1e1eda1a upstream.
Just like many other Samsung models, the 670Z5E needs to use the acpi-video
backlight interface rather then the native one for backlight control to
work, add a quirk for this.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1557060
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 8 Feb 2018 07:23:44 +0000 (10:23 +0300)]
regmap: Fix reversed bounds check in regmap_raw_write()
commit
f00e71091ab92eba52122332586c6ecaa9cd1a56 upstream.
We're supposed to be checking that "val_len" is not too large but
instead we check if it is smaller than the max.
The only function affected would be regmap_i2c_smbus_i2c_write() in
drivers/base/regmap/regmap-i2c.c. Strangely that function has its own
limit check which returns an error if (count >= I2C_SMBUS_BLOCK_MAX) so
it doesn't look like it has ever been able to do anything except return
an error.
Fixes:
c335931ed9d2 ("regmap: Add raw_write/read checks for max_raw_write/read sizes")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Andryuk [Wed, 28 Feb 2018 12:23:23 +0000 (07:23 -0500)]
xen-netfront: Fix hang on device removal
commit
c2d2e6738a209f0f9dffa2dc8e7292fc45360d61 upstream.
A toolstack may delete the vif frontend and backend xenstore entries
while xen-netfront is in the removal code path. In that case, the
checks for xenbus_read_driver_state would return XenbusStateUnknown, and
xennet_remove would hang indefinitely. This hang prevents system
shutdown.
xennet_remove must be able to handle XenbusStateUnknown, and
netback_changed must also wake up the wake_queue for that state as well.
Fixes:
5b5971df3bc2 ("xen-netfront: remove warning when unloading module")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Cc: Eduardo Otubo <otubo@redhat.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Santiago Esteban [Thu, 18 Jan 2018 14:38:47 +0000 (15:38 +0100)]
ARM: dts: at91: sama5d4: fix pinctrl compatible string
commit
9a06757dcc8509c162ac00488c8c82fc98e04227 upstream.
The compatible string is incorrect. Add atmel,sama5d3-pinctrl since
it's the appropriate compatible string. Remove the
atmel,at91rm9200-pinctrl compatible string, this fallback is
useless, there are too many changes.
Signed-off-by: Santiago Esteban <Santiago.Esteban@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: stable@vger.kernel.org #v3.18
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Ferre [Tue, 13 Mar 2018 15:20:05 +0000 (16:20 +0100)]
ARM: dts: at91: at91sam9g25: fix mux-mask pinctrl property
commit
e8fd0adf105e132fd84545997bbef3d5edc2c9c1 upstream.
There are only 19 PIOB pins having primary names PB0-PB18. Not all of them
have a 'C' function. So the pinctrl property mask ends up being the same as the
other SoC of the at91sam9x5 series.
Reported-by: Marek Sieranski <marek.sieranski@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heinrich Schuchardt [Thu, 29 Mar 2018 15:48:28 +0000 (10:48 -0500)]
usb: musb: gadget: misplaced out of bounds check
commit
af6f8529098aeb0e56a68671b450cf74e7a64fcd upstream.
musb->endpoints[] has array size MUSB_C_NUM_EPS.
We must check array bounds before accessing the array and not afterwards.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Bin Liu <b-liu@ti.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vlastimil Babka [Fri, 13 Apr 2018 22:35:38 +0000 (15:35 -0700)]
mm, slab: reschedule cache_reap() on the same CPU
commit
a9f2a846f0503e7d729f552e3ccfe2279010fe94 upstream.
cache_reap() is initially scheduled in start_cpu_timer() via
schedule_delayed_work_on(). But then the next iterations are scheduled
via schedule_delayed_work(), i.e. using WORK_CPU_UNBOUND.
Thus since commit
ef557180447f ("workqueue: schedule WORK_CPU_UNBOUND
work on wq_unbound_cpumask CPUs") there is no guarantee the future
iterations will run on the originally intended cpu, although it's still
preferred. I was able to demonstrate this with
/sys/module/workqueue/parameters/debug_force_rr_cpu. IIUC, it may also
happen due to migrating timers in nohz context. As a result, some cpu's
would be calling cache_reap() more frequently and others never.
This patch uses schedule_delayed_work_on() with the current cpu when
scheduling the next iteration.
Link: http://lkml.kernel.org/r/20180411070007.32225-1-vbabka@suse.cz
Fixes:
ef557180447f ("workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 13 Apr 2018 22:35:30 +0000 (15:35 -0700)]
ipc/shm: fix use-after-free of shm file via remap_file_pages()
commit
3f05317d9889ab75c7190dcd39491d2a97921984 upstream.
syzbot reported a use-after-free of shm_file_data(file)->file->f_op in
shm_get_unmapped_area(), called via sys_remap_file_pages().
Unfortunately it couldn't generate a reproducer, but I found a bug which
I think caused it. When remap_file_pages() is passed a full System V
shared memory segment, the memory is first unmapped, then a new map is
created using the ->vm_file. Between these steps, the shm ID can be
removed and reused for a new shm segment. But, shm_mmap() only checks
whether the ID is currently valid before calling the underlying file's
->mmap(); it doesn't check whether it was reused. Thus it can use the
wrong underlying file, one that was already freed.
Fix this by making the "outer" shm file (the one that gets put in
->vm_file) hold a reference to the real shm file, and by making
__shm_open() require that the file associated with the shm ID matches
the one associated with the "outer" file.
Taking the reference to the real shm file is needed to fully solve the
problem, since otherwise sfd->file could point to a freed file, which
then could be reallocated for the reused shm ID, causing the wrong shm
segment to be mapped (and without the required permission checks).
Commit
1ac0b6dec656 ("ipc/shm: handle removed segments gracefully in
shm_mmap()") almost fixed this bug, but it didn't go far enough because
it didn't consider the case where the shm ID is reused.
The following program usually reproduces this bug:
#include <stdlib.h>
#include <sys/shm.h>
#include <sys/syscall.h>
#include <unistd.h>
int main()
{
int is_parent = (fork() != 0);
srand(getpid());
for (;;) {
int id = shmget(0xF00F, 4096, IPC_CREAT|0700);
if (is_parent) {
void *addr = shmat(id, NULL, 0);
usleep(rand() % 50);
while (!syscall(__NR_remap_file_pages, addr, 4096, 0, 0, 0));
} else {
usleep(rand() % 50);
shmctl(id, IPC_RMID, NULL);
}
}
}
It causes the following NULL pointer dereference due to a 'struct file'
being used while it's being freed. (I couldn't actually get a KASAN
use-after-free splat like in the syzbot report. But I think it's
possible with this bug; it would just take a more extraordinary race...)
BUG: unable to handle kernel NULL pointer dereference at
0000000000000058
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 9 PID: 258 Comm: syz_ipc Not tainted
4.16.0-05140-gf8cf2f16a7c95 #189
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
RIP: 0010:d_inode include/linux/dcache.h:519 [inline]
RIP: 0010:touch_atime+0x25/0xd0 fs/inode.c:1724
[...]
Call Trace:
file_accessed include/linux/fs.h:2063 [inline]
shmem_mmap+0x25/0x40 mm/shmem.c:2149
call_mmap include/linux/fs.h:1789 [inline]
shm_mmap+0x34/0x80 ipc/shm.c:465
call_mmap include/linux/fs.h:1789 [inline]
mmap_region+0x309/0x5b0 mm/mmap.c:1712
do_mmap+0x294/0x4a0 mm/mmap.c:1483
do_mmap_pgoff include/linux/mm.h:2235 [inline]
SYSC_remap_file_pages mm/mmap.c:2853 [inline]
SyS_remap_file_pages+0x232/0x310 mm/mmap.c:2769
do_syscall_64+0x64/0x1a0 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
[ebiggers@google.com: add comment]
Link: http://lkml.kernel.org/r/20180410192850.235835-1-ebiggers3@gmail.com
Link: http://lkml.kernel.org/r/20180409043039.28915-1-ebiggers3@gmail.com
Reported-by: syzbot+d11f321e7f1923157eac80aa990b446596f46439@syzkaller.appspotmail.com
Fixes:
c8d78c1823f4 ("mm: replace remap_file_pages() syscall with emulation")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 13 Apr 2018 22:35:13 +0000 (15:35 -0700)]
resource: fix integer overflow at reallocation
commit
60bb83b81169820c691fbfa33a6a4aef32aa4b0b upstream.
We've got a bug report indicating a kernel panic at booting on an x86-32
system, and it turned out to be the invalid PCI resource assigned after
reallocation. __find_resource() first aligns the resource start address
and resets the end address with start+size-1 accordingly, then checks
whether it's contained. Here the end address may overflow the integer,
although resource_contains() still returns true because the function
validates only start and end address. So this ends up with returning an
invalid resource (start > end).
There was already an attempt to cover such a problem in the commit
47ea91b4052d ("Resource: fix wrong resource window calculation"), but
this case is an overseen one.
This patch adds the validity check of the newly calculated resource for
avoiding the integer overflow problem.
Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=
1086739
Link: http://lkml.kernel.org/r/s5hpo37d5l8.wl-tiwai@suse.de
Fixes:
23c570a67448 ("resource: ability to resize an allocated resource")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reported-by: Michael Henders <hendersm@shaw.ca>
Tested-by: Michael Henders <hendersm@shaw.ca>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Morton [Tue, 10 Apr 2018 23:34:41 +0000 (16:34 -0700)]
fs/reiserfs/journal.c: add missing resierfs_warning() arg
commit
9ad553abe66f8be3f4755e9fa0a6ba137ce76341 upstream.
One use of the reiserfs_warning() macro in journal_init_dev() is missing
a parameter, causing the following warning:
REISERFS warning (device loop0): journal_init_dev: Cannot open '%s': %i journal_init_dev:
This also causes a WARN_ONCE() warning in the vsprintf code, and then a
panic if panic_on_warn is set.
Please remove unsupported %/ in format string
WARNING: CPU: 1 PID: 4480 at lib/vsprintf.c:2138 format_decode+0x77f/0x830 lib/vsprintf.c:2138
Kernel panic - not syncing: panic_on_warn set ...
Just add another string argument to the macro invocation.
Addresses https://syzkaller.appspot.com/bug?id=
0627d4551fdc39bf1ef5d82cd9eef587047f7718
Link: http://lkml.kernel.org/r/d678ebe1-6f54-8090-df4c-b9affad62293@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: <syzbot+6bd77b88c1977c03f584@syzkaller.appspotmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jeff Mahoney <jeffm@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Weinberger [Sat, 3 Mar 2018 10:45:54 +0000 (11:45 +0100)]
ubi: Reject MLC NAND
commit
b5094b7f135be34630e3ea8a98fa215715d0f29d upstream.
While UBI and UBIFS seem to work at first sight with MLC NAND, you will
most likely lose all your data upon a power-cut or due to read/write
disturb.
In order to protect users from bad surprises, refuse to attach to MLC
NAND.
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Artem Bityutskiy <dedekind1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Romain Izard [Mon, 29 Jan 2018 10:18:20 +0000 (11:18 +0100)]
ubi: Fix error for write access
commit
78a8dfbabbece22bee58ac4cb26cab10e7a19c5d upstream.
When opening a device with write access, ubiblock_open returns an error
code. Currently, this error code is -EPERM, but this is not the right
value.
The open function for other block devices returns -EROFS when opening
read-only devices with FMODE_WRITE set. When used with dm-verity, the
veritysetup userspace tool is expecting EROFS, and refuses to use the
ubiblock device.
Use -EROFS for ubiblock as well. As a result, veritysetup accepts the
ubiblock device as valid.
Cc: stable@vger.kernel.org
Fixes:
9d54c8a33eec (UBI: R/O block driver on top of UBI volumes)
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Weinberger [Wed, 17 Jan 2018 22:15:57 +0000 (23:15 +0100)]
ubi: fastmap: Don't flush fastmap work on detach
commit
29b7a6fa1ec07e8480b0d9caf635a4498a438bf4 upstream.
At this point UBI volumes have already been free()'ed and fastmap can no
longer access these data structures.
Reported-by: Martin Townsend <mtownsend1973@gmail.com>
Fixes:
74cdaf24004a ("UBI: Fastmap: Fix memory leaks while closing the WL sub-system")
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Weinberger [Wed, 17 Jan 2018 18:12:42 +0000 (19:12 +0100)]
ubifs: Check ubifs_wbuf_sync() return code
commit
aac17948a7ce01fb60b9ee6cf902967a47b3ce26 upstream.
If ubifs_wbuf_sync() fails we must not write a master node with the
dirty marker cleared.
Otherwise it is possible that in case of an IO error while syncing we
mark the filesystem as clean and UBIFS refuses to recover upon next
mount.
Cc: <stable@vger.kernel.org>
Fixes:
1e51764a3c2a ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tejun Heo [Tue, 13 Feb 2018 15:38:08 +0000 (07:38 -0800)]
tty: make n_tty_read() always abort if hangup is in progress
commit
28b0f8a6962a24ed21737578f3b1b07424635c9e upstream.
A tty is hung up by __tty_hangup() setting file->f_op to
hung_up_tty_fops, which is skipped on ttys whose write operation isn't
tty_write(). This means that, for example, /dev/console whose write
op is redirected_tty_write() is never actually marked hung up.
Because n_tty_read() uses the hung up status to decide whether to
abort the waiting readers, the lack of hung-up marking can lead to the
following scenario.
1. A session contains two processes. The leader and its child. The
child ignores SIGHUP.
2. The leader exits and starts disassociating from the controlling
terminal (/dev/console).
3. __tty_hangup() skips setting f_op to hung_up_tty_fops.
4. SIGHUP is delivered and ignored.
5. tty_ldisc_hangup() is invoked. It wakes up the waits which should
clear the read lockers of tty->ldisc_sem.
6. The reader wakes up but because tty_hung_up_p() is false, it
doesn't abort and goes back to sleep while read-holding
tty->ldisc_sem.
7. The leader progresses to tty_ldisc_lock() in tty_ldisc_hangup()
and is now stuck in D sleep indefinitely waiting for
tty->ldisc_sem.
The following is Alan's explanation on why some ttys aren't hung up.
http://lkml.kernel.org/r/
20171101170908.
6ad08580@alans-desktop
1. It broke the serial consoles because they would hang up and close
down the hardware. With tty_port that *should* be fixable properly
for any cases remaining.
2. The console layer was (and still is) completely broken and doens't
refcount properly. So if you turn on console hangups it breaks (as
indeed does freeing consoles and half a dozen other things).
As neither can be fixed quickly, this patch works around the problem
by introducing a new flag, TTY_HUPPING, which is used solely to tell
n_tty_read() that hang-up is in progress for the console and the
readers should be aborted regardless of the hung-up status of the
device.
The following is a sample hung task warning caused by this issue.
INFO: task agetty:2662 blocked for more than 120 seconds.
Not tainted
4.11.3-dbg-tty-lockup-02478-gfd6c7ee-dirty #28
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
0 2662 1 0x00000086
Call Trace:
__schedule+0x267/0x890
schedule+0x36/0x80
schedule_timeout+0x23c/0x2e0
ldsem_down_write+0xce/0x1f6
tty_ldisc_lock+0x16/0x30
tty_ldisc_hangup+0xb3/0x1b0
__tty_hangup+0x300/0x410
disassociate_ctty+0x6c/0x290
do_exit+0x7ef/0xb00
do_group_exit+0x3f/0xa0
get_signal+0x1b3/0x5d0
do_signal+0x28/0x660
exit_to_usermode_loop+0x46/0x86
do_syscall_64+0x9c/0xb0
entry_SYSCALL64_slow_path+0x25/0x25
The following is the repro. Run "$PROG /dev/console". The parent
process hangs in D state.
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/wait.h>
#include <sys/ioctl.h>
#include <fcntl.h>
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <errno.h>
#include <signal.h>
#include <time.h>
#include <termios.h>
int main(int argc, char **argv)
{
struct sigaction sact = { .sa_handler = SIG_IGN };
struct timespec ts1s = { .tv_sec = 1 };
pid_t pid;
int fd;
if (argc < 2) {
fprintf(stderr, "test-hung-tty /dev/$TTY\n");
return 1;
}
/* fork a child to ensure that it isn't already the session leader */
pid = fork();
if (pid < 0) {
perror("fork");
return 1;
}
if (pid > 0) {
/* top parent, wait for everyone */
while (waitpid(-1, NULL, 0) >= 0)
;
if (errno != ECHILD)
perror("waitpid");
return 0;
}
/* new session, start a new session and set the controlling tty */
if (setsid() < 0) {
perror("setsid");
return 1;
}
fd = open(argv[1], O_RDWR);
if (fd < 0) {
perror("open");
return 1;
}
if (ioctl(fd, TIOCSCTTY, 1) < 0) {
perror("ioctl");
return 1;
}
/* fork a child, sleep a bit and exit */
pid = fork();
if (pid < 0) {
perror("fork");
return 1;
}
if (pid > 0) {
nanosleep(&ts1s, NULL);
printf("Session leader exiting\n");
exit(0);
}
/*
* The child ignores SIGHUP and keeps reading from the controlling
* tty. Because SIGHUP is ignored, the child doesn't get killed on
* parent exit and the bug in n_tty makes the read(2) block the
* parent's control terminal hangup attempt. The parent ends up in
* D sleep until the child is explicitly killed.
*/
sigaction(SIGHUP, &sact, NULL);
printf("Child reading tty\n");
while (1) {
char buf[1024];
if (read(fd, buf, sizeof(buf)) < 0) {
perror("read");
return 1;
}
}
return 0;
}
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alan Cox <alan@llwyncelyn.cymru>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Mon, 8 Aug 2016 17:35:29 +0000 (20:35 +0300)]
x86/hweight: Don't clobber %rdi
commit
65ea11ec6a82b1d44aba62b59e9eb20247e57c6e upstream.
The caller expects %rdi to remain intact, push+pop it make that happen.
Fixes the following kind of explosions on my core2duo machine when
trying to reboot or shut down:
general protection fault: 0000 [#1] PREEMPT SMP
Modules linked in: i915 i2c_algo_bit drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea drm netconsole configfs binfmt_misc iTCO_wdt psmouse pcspkr snd_hda_codec_idt e100 coretemp hwmon snd_hda_codec_generic i2c_i801 mii i2c_smbus lpc_ich mfd_core snd_hda_intel uhci_hcd snd_hda_codec snd_hwdep snd_hda_core ehci_pci 8250 ehci_hcd snd_pcm 8250_base usbcore evdev serial_core usb_common parport_pc parport snd_timer snd soundcore
CPU: 0 PID: 3070 Comm: reboot Not tainted 4.8.0-rc1-perf-dirty #69
Hardware name: /D946GZIS, BIOS TS94610J.86A.0087.2007.1107.1049 11/07/2007
task:
ffff88012a0b4080 task.stack:
ffff880123850000
RIP: 0010:[<
ffffffff81003c92>] [<
ffffffff81003c92>] x86_perf_event_update+0x52/0xc0
RSP: 0018:
ffff880123853b60 EFLAGS:
00010087
RAX:
0000000000000001 RBX:
ffff88012fc0a3c0 RCX:
000000000000001e
RDX:
0000000000000000 RSI:
0000000040000000 RDI:
ffff88012b014800
RBP:
ffff880123853b88 R08:
ffffffffffffffff R09:
0000000000000000
R10:
ffffea0004a012c0 R11:
ffffea0004acedc0 R12:
ffffffff80000001
R13:
ffff88012b0149c0 R14:
ffff88012b014800 R15:
0000000000000018
FS:
00007f8b155cd700(0000) GS:
ffff88012fc00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f8b155f5000 CR3:
000000012a2d7000 CR4:
00000000000006f0
Stack:
ffff88012fc0a3c0 ffff88012b014800 0000000000000004 0000000000000001
ffff88012fc1b750 ffff880123853bb0 ffffffff81003d59 ffff88012b014800
ffff88012fc0a3c0 ffff88012b014800 ffff880123853bd8 ffffffff81003e13
Call Trace:
[<
ffffffff81003d59>] x86_pmu_stop+0x59/0xd0
[<
ffffffff81003e13>] x86_pmu_del+0x43/0x140
[<
ffffffff8111705d>] event_sched_out.isra.105+0xbd/0x260
[<
ffffffff8111738d>] __perf_remove_from_context+0x2d/0xb0
[<
ffffffff8111745d>] __perf_event_exit_context+0x4d/0x70
[<
ffffffff810c8826>] generic_exec_single+0xb6/0x140
[<
ffffffff81117410>] ? __perf_remove_from_context+0xb0/0xb0
[<
ffffffff81117410>] ? __perf_remove_from_context+0xb0/0xb0
[<
ffffffff810c898f>] smp_call_function_single+0xdf/0x140
[<
ffffffff81113d27>] perf_event_exit_cpu_context+0x87/0xc0
[<
ffffffff81113d73>] perf_reboot+0x13/0x40
[<
ffffffff8107578a>] notifier_call_chain+0x4a/0x70
[<
ffffffff81075ad7>] __blocking_notifier_call_chain+0x47/0x60
[<
ffffffff81075b06>] blocking_notifier_call_chain+0x16/0x20
[<
ffffffff81076a1d>] kernel_restart_prepare+0x1d/0x40
[<
ffffffff81076ae2>] kernel_restart+0x12/0x60
[<
ffffffff81076d56>] SYSC_reboot+0xf6/0x1b0
[<
ffffffff811a823c>] ? mntput_no_expire+0x2c/0x1b0
[<
ffffffff811a83e4>] ? mntput+0x24/0x40
[<
ffffffff811894fc>] ? __fput+0x16c/0x1e0
[<
ffffffff811895ae>] ? ____fput+0xe/0x10
[<
ffffffff81072fc3>] ? task_work_run+0x83/0xa0
[<
ffffffff81001623>] ? exit_to_usermode_loop+0x53/0xc0
[<
ffffffff8100105a>] ? trace_hardirqs_on_thunk+0x1a/0x1c
[<
ffffffff81076e6e>] SyS_reboot+0xe/0x10
[<
ffffffff814c4ba5>] entry_SYSCALL_64_fastpath+0x18/0xa3
Code: 7c 4c 8d af c0 01 00 00 49 89 fe eb 10 48 09 c2 4c 89 e0 49 0f b1 55 00 4c 39 e0 74 35 4d 8b a6 c0 01 00 00 41 8b 8e 60 01 00 00 <0f> 33 8b 35 6e 02 8c 00 48 c1 e2 20 85 f6 7e d2 48 89 d3 89 cf
RIP [<
ffffffff81003c92>] x86_perf_event_update+0x52/0xc0
RSP <
ffff880123853b60>
---[ end trace
7ec95181faf211be ]---
note: reboot[3070] exited with preempt_count 2
Cc: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Fixes:
f5967101e9de ("x86/hweight: Get rid of the special calling convention")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov [Mon, 30 May 2016 10:56:27 +0000 (12:56 +0200)]
x86/hweight: Get rid of the special calling convention
commit
f5967101e9de12addcda4510dfbac66d7c5779c3 upstream.
People complained about ARCH_HWEIGHT_CFLAGS and how it throws a wrench
into kcov, lto, etc, experimentations.
Add asm versions for __sw_hweight{32,64}() and do explicit saving and
restoring of clobbered registers. This gets rid of the special calling
convention. We get to call those functions on !X86_FEATURE_POPCNT CPUs.
We still need to hardcode POPCNT and register operands as some old gas
versions which we support, do not know about POPCNT.
Btw, remove redundant REX prefix from 32-bit POPCNT because alternatives
can do padding now.
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1464605787-20603-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Phil Elwell [Wed, 11 Apr 2018 09:59:17 +0000 (10:59 +0100)]
lan78xx: Correctly indicate invalid OTP
[ Upstream commit
4bfc33807a9a02764bdd1e42e794b3b401240f27 ]
lan78xx_read_otp tries to return -EINVAL in the event of invalid OTP
content, but the value gets overwritten before it is returned and the
read goes ahead anyway. Make the read conditional as it should be
and preserve the error code.
Fixes:
55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tejaswi Tanikella [Wed, 11 Apr 2018 11:04:47 +0000 (16:34 +0530)]
slip: Check if rstate is initialized before uncompressing
[ Upstream commit
3f01ddb962dc506916c243f9524e8bef97119b77 ]
On receiving a packet the state index points to the rstate which must be
used to fill up IP and TCP headers. But if the state index points to a
rstate which is unitialized, i.e. filled with zeros, it gets stuck in an
infinite loop inside ip_fast_csum trying to compute the ip checsum of a
header with zero length.
89.666953: <2> [<
ffffff9dd3e94d38>] slhc_uncompress+0x464/0x468
89.666965: <2> [<
ffffff9dd3e87d88>] ppp_receive_nonmp_frame+0x3b4/0x65c
89.666978: <2> [<
ffffff9dd3e89dd4>] ppp_receive_frame+0x64/0x7e0
89.666991: <2> [<
ffffff9dd3e8a708>] ppp_input+0x104/0x198
89.667005: <2> [<
ffffff9dd3e93868>] pppopns_recv_core+0x238/0x370
89.667027: <2> [<
ffffff9dd4428fc8>] __sk_receive_skb+0xdc/0x250
89.667040: <2> [<
ffffff9dd3e939e4>] pppopns_recv+0x44/0x60
89.667053: <2> [<
ffffff9dd4426848>] __sock_queue_rcv_skb+0x16c/0x24c
89.667065: <2> [<
ffffff9dd4426954>] sock_queue_rcv_skb+0x2c/0x38
89.667085: <2> [<
ffffff9dd44f7358>] raw_rcv+0x124/0x154
89.667098: <2> [<
ffffff9dd44f7568>] raw_local_deliver+0x1e0/0x22c
89.667117: <2> [<
ffffff9dd44c8ba0>] ip_local_deliver_finish+0x70/0x24c
89.667131: <2> [<
ffffff9dd44c92f4>] ip_local_deliver+0x100/0x10c
./scripts/faddr2line vmlinux slhc_uncompress+0x464/0x468 output:
ip_fast_csum at arch/arm64/include/asm/checksum.h:40
(inlined by) slhc_uncompress at drivers/net/slip/slhc.c:615
Adding a variable to indicate if the current rstate is initialized. If
such a packet arrives, move to toss state.
Signed-off-by: Tejaswi Tanikella <tejaswit@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bassem Boubaker [Wed, 11 Apr 2018 11:15:53 +0000 (13:15 +0200)]
cdc_ether: flag the Cinterion AHS8 modem by gemalto as WWAN
[ Upstream commit
53765341ee821c0a0f1dec41adc89c9096ad694c ]
The Cinterion AHS8 is a 3G device with one embedded WWAN interface
using cdc_ether as a driver.
The modem is controlled via AT commands through the exposed TTYs.
AT+CGDCONT write command can be used to activate or deactivate a WWAN
connection for a PDP context defined with the same command. UE
supports one WWAN adapter.
Signed-off-by: Bassem Boubaker <bassem.boubaker@actia.fr>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Szyprowski [Mon, 15 Jan 2018 13:58:21 +0000 (14:58 +0100)]
hwmon: (ina2xx) Fix access to uninitialized mutex
commit
0c4c5860e9983eb3da7a3d73ca987643c3ed034b upstream.
Initialize data->config_lock mutex before it is used by the driver code.
This fixes following warning on Odroid XU3 boards:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 5 PID: 1 Comm: swapper/0 Not tainted
4.15.0-rc7-next-20180115-00001-gb75575dee3f2 #107
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<
c0111504>] (unwind_backtrace) from [<
c010dbec>] (show_stack+0x10/0x14)
[<
c010dbec>] (show_stack) from [<
c09b3f74>] (dump_stack+0x90/0xc8)
[<
c09b3f74>] (dump_stack) from [<
c0179528>] (register_lock_class+0x1c0/0x59c)
[<
c0179528>] (register_lock_class) from [<
c017bd1c>] (__lock_acquire+0x78/0x1850)
[<
c017bd1c>] (__lock_acquire) from [<
c017de30>] (lock_acquire+0xc8/0x2b8)
[<
c017de30>] (lock_acquire) from [<
c09ca59c>] (__mutex_lock+0x60/0xa0c)
[<
c09ca59c>] (__mutex_lock) from [<
c09cafd0>] (mutex_lock_nested+0x1c/0x24)
[<
c09cafd0>] (mutex_lock_nested) from [<
c068b0d0>] (ina2xx_set_shunt+0x70/0xb0)
[<
c068b0d0>] (ina2xx_set_shunt) from [<
c068b218>] (ina2xx_probe+0x88/0x1b0)
[<
c068b218>] (ina2xx_probe) from [<
c0673d90>] (i2c_device_probe+0x1e0/0x2d0)
[<
c0673d90>] (i2c_device_probe) from [<
c053a268>] (driver_probe_device+0x2b8/0x4a0)
[<
c053a268>] (driver_probe_device) from [<
c053a54c>] (__driver_attach+0xfc/0x120)
[<
c053a54c>] (__driver_attach) from [<
c05384cc>] (bus_for_each_dev+0x58/0x7c)
[<
c05384cc>] (bus_for_each_dev) from [<
c0539590>] (bus_add_driver+0x174/0x250)
[<
c0539590>] (bus_add_driver) from [<
c053b5e0>] (driver_register+0x78/0xf4)
[<
c053b5e0>] (driver_register) from [<
c0675ef0>] (i2c_register_driver+0x38/0xa8)
[<
c0675ef0>] (i2c_register_driver) from [<
c0102b40>] (do_one_initcall+0x48/0x18c)
[<
c0102b40>] (do_one_initcall) from [<
c0e00df0>] (kernel_init_freeable+0x110/0x1d4)
[<
c0e00df0>] (kernel_init_freeable) from [<
c09c8120>] (kernel_init+0x8/0x114)
[<
c09c8120>] (kernel_init) from [<
c01010b4>] (ret_from_fork+0x14/0x20)
Fixes:
5d389b125186 ("hwmon: (ina2xx) Make calibration register value fixed")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[backport to v4.4.y/v4.9.y: context changes]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudhir Sreedharan [Thu, 15 Feb 2018 07:22:45 +0000 (12:52 +0530)]
rtl8187: Fix NULL pointer dereference in priv->conf_mutex
commit
7972326a26b5bf8dc2adac575c4e03ee7e9d193a upstream.
This can be reproduced by bind/unbind the driver multiple times
in AM3517 board.
Analysis revealed that rtl8187_start() was invoked before probe
finishes(ie. before the mutex is initialized).
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
Hardware name: Generic AM3517 (Flattened Device Tree)
[<
c010e0d8>] (unwind_backtrace) from [<
c010beac>] (show_stack+0x10/0x14)
[<
c010beac>] (show_stack) from [<
c017401c>] (register_lock_class+0x4f4/0x55c)
[<
c017401c>] (register_lock_class) from [<
c0176fe0>] (__lock_acquire+0x74/0x1938)
[<
c0176fe0>] (__lock_acquire) from [<
c0178cfc>] (lock_acquire+0xfc/0x23c)
[<
c0178cfc>] (lock_acquire) from [<
c08aa2f8>] (mutex_lock_nested+0x50/0x3b0)
[<
c08aa2f8>] (mutex_lock_nested) from [<
c05f5bf8>] (rtl8187_start+0x2c/0xd54)
[<
c05f5bf8>] (rtl8187_start) from [<
c082dea0>] (drv_start+0xa8/0x320)
[<
c082dea0>] (drv_start) from [<
c084d1d4>] (ieee80211_do_open+0x2bc/0x8e4)
[<
c084d1d4>] (ieee80211_do_open) from [<
c069be94>] (__dev_open+0xb8/0x120)
[<
c069be94>] (__dev_open) from [<
c069c11c>] (__dev_change_flags+0x88/0x14c)
[<
c069c11c>] (__dev_change_flags) from [<
c069c1f8>] (dev_change_flags+0x18/0x48)
[<
c069c1f8>] (dev_change_flags) from [<
c0710b08>] (devinet_ioctl+0x738/0x840)
[<
c0710b08>] (devinet_ioctl) from [<
c067925c>] (sock_ioctl+0x164/0x2f4)
[<
c067925c>] (sock_ioctl) from [<
c02883f8>] (do_vfs_ioctl+0x8c/0x9d0)
[<
c02883f8>] (do_vfs_ioctl) from [<
c0288da8>] (SyS_ioctl+0x6c/0x7c)
[<
c0288da8>] (SyS_ioctl) from [<
c0107760>] (ret_fast_syscall+0x0/0x1c)
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd =
cd1ec000
[
00000000] *pgd=
8d1de831, *pte=
00000000, *ppte=
00000000
Internal error: Oops: 817 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
Hardware name: Generic AM3517 (Flattened Device Tree)
task:
ce73eec0 task.stack:
cd1ea000
PC is at mutex_lock_nested+0xe8/0x3b0
LR is at mutex_lock_nested+0xd0/0x3b0
Cc: stable@vger.kernel.org
Signed-off-by: Sudhir Sreedharan <ssreedharan@mvista.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sun, 8 Apr 2018 15:57:10 +0000 (11:57 -0400)]
getname_kernel() needs to make sure that ->name != ->iname in long case
commit
30ce4d1903e1d8a7ccd110860a5eef3c638ed8be upstream.
missed it in "kill struct filename.separate" several years ago.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Gorbik [Tue, 3 Apr 2018 14:02:15 +0000 (16:02 +0200)]
s390/ipl: ensure loadparm valid flag is set
commit
15deb080a6087b73089139569558965750e69d67 upstream.
When loadparm is set in reipl parm block, the kernel should also set
DIAG308_FLAGS_LP_VALID flag.
This fixes loadparm ignoring during z/VM fcp -> ccw reipl and kvm direct
boot -> ccw reipl.
Cc: <stable@vger.kernel.org>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Wiedmann [Wed, 7 Mar 2018 13:01:01 +0000 (14:01 +0100)]
s390/qdio: don't merge ERROR output buffers
commit
0cf1e05157b9e5530dcc3ca9fec9bf617fc93375 upstream.
On an Output queue, both EMPTY and PENDING buffer states imply that the
buffer is ready for completion-processing by the upper-layer drivers.
So for a non-QEBSM Output queue, get_buf_states() merges mixed
batches of PENDING and EMPTY buffers into one large batch of EMPTY
buffers. The upper-layer driver (ie. qeth) later distuingishes PENDING
from EMPTY by inspecting the slsb_state for
QDIO_OUTBUF_STATE_FLAG_PENDING.
But the merge logic in get_buf_states() contains a bug that causes us to
erronously also merge ERROR buffers into such a batch of EMPTY buffers
(ERROR is 0xaf, EMPTY is 0xa1; so ERROR & EMPTY == EMPTY).
Effectively, most outbound ERROR buffers are currently discarded
silently and processed as if they had succeeded.
Note that this affects _all_ non-QEBSM device types, not just IQD with CQ.
Fix it by explicitly spelling out the exact conditions for merging.
For extracting the "get initial state" part out of the loop, this relies
on the fact that get_buf_states() is never called with a count of 0. The
QEBSM path already strictly requires this, and the two callers with
variable 'count' make sure of it.
Fixes:
104ea556ee7f ("qdio: support asynchronous delivery of storage blocks")
Cc: <stable@vger.kernel.org> #v3.2+
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Wiedmann [Mon, 5 Mar 2018 08:39:38 +0000 (09:39 +0100)]
s390/qdio: don't retry EQBS after CCQ 96
commit
dae55b6fef58530c13df074bcc182c096609339e upstream.
Immediate retry of EQBS after CCQ 96 means that we potentially misreport
the state of buffers inspected during the first EQBS call.
This occurs when
1. the first EQBS finds all inspected buffers still in the initial state
set by the driver (ie INPUT EMPTY or OUTPUT PRIMED),
2. the EQBS terminates early with CCQ 96, and
3. by the time that the second EQBS comes around, the state of those
previously inspected buffers has changed.
If the state reported by the second EQBS is 'driver-owned', all we know
is that the previous buffers are driver-owned now as well. But we can't
tell if they all have the same state. So for instance
- the second EQBS reports OUTPUT EMPTY, but any number of the previous
buffers could be OUTPUT ERROR by now,
- the second EQBS reports OUTPUT ERROR, but any number of the previous
buffers could be OUTPUT EMPTY by now.
Effectively, this can result in both over- and underreporting of errors.
If the state reported by the second EQBS is 'HW-owned', that doesn't
guarantee that the previous buffers have not been switched to
driver-owned in the mean time. So for instance
- the second EQBS reports INPUT EMPTY, but any number of the previous
buffers could be INPUT PRIMED (or INPUT ERROR) by now.
This would result in failure to process pending work on the queue. If
it's the final check before yielding initiative, this can cause
a (temporary) queue stall due to IRQ avoidance.
Fixes:
25f269f17316 ("[S390] qdio: EQBS retry after CCQ 96")
Cc: <stable@vger.kernel.org> #v3.2+
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Fri, 6 Apr 2018 01:03:17 +0000 (10:03 +0900)]
block/loop: fix deadlock after loop_set_status
commit
1e047eaab3bb5564f25b41e9cd3a053009f4e789 upstream.
syzbot is reporting deadlocks at __blkdev_get() [1].
----------------------------------------
[ 92.493919] systemd-udevd D12696 525 1 0x00000000
[ 92.495891] Call Trace:
[ 92.501560] schedule+0x23/0x80
[ 92.502923] schedule_preempt_disabled+0x5/0x10
[ 92.504645] __mutex_lock+0x416/0x9e0
[ 92.510760] __blkdev_get+0x73/0x4f0
[ 92.512220] blkdev_get+0x12e/0x390
[ 92.518151] do_dentry_open+0x1c3/0x2f0
[ 92.519815] path_openat+0x5d9/0xdc0
[ 92.521437] do_filp_open+0x7d/0xf0
[ 92.527365] do_sys_open+0x1b8/0x250
[ 92.528831] do_syscall_64+0x6e/0x270
[ 92.530341] entry_SYSCALL_64_after_hwframe+0x42/0xb7
[ 92.931922] 1 lock held by systemd-udevd/525:
[ 92.933642] #0:
00000000a2849e25 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x73/0x4f0
----------------------------------------
The reason of deadlock turned out that wait_event_interruptible() in
blk_queue_enter() got stuck with bdev->bd_mutex held at __blkdev_put()
due to q->mq_freeze_depth == 1.
----------------------------------------
[ 92.787172] a.out S12584 634 633 0x80000002
[ 92.789120] Call Trace:
[ 92.796693] schedule+0x23/0x80
[ 92.797994] blk_queue_enter+0x3cb/0x540
[ 92.803272] generic_make_request+0xf0/0x3d0
[ 92.807970] submit_bio+0x67/0x130
[ 92.810928] submit_bh_wbc+0x15e/0x190
[ 92.812461] __block_write_full_page+0x218/0x460
[ 92.815792] __writepage+0x11/0x50
[ 92.817209] write_cache_pages+0x1ae/0x3d0
[ 92.825585] generic_writepages+0x5a/0x90
[ 92.831865] do_writepages+0x43/0xd0
[ 92.836972] __filemap_fdatawrite_range+0xc1/0x100
[ 92.838788] filemap_write_and_wait+0x24/0x70
[ 92.840491] __blkdev_put+0x69/0x1e0
[ 92.841949] blkdev_close+0x16/0x20
[ 92.843418] __fput+0xda/0x1f0
[ 92.844740] task_work_run+0x87/0xb0
[ 92.846215] do_exit+0x2f5/0xba0
[ 92.850528] do_group_exit+0x34/0xb0
[ 92.852018] SyS_exit_group+0xb/0x10
[ 92.853449] do_syscall_64+0x6e/0x270
[ 92.854944] entry_SYSCALL_64_after_hwframe+0x42/0xb7
[ 92.943530] 1 lock held by a.out/634:
[ 92.945105] #0:
00000000a2849e25 (&bdev->bd_mutex){+.+.}, at: __blkdev_put+0x3c/0x1e0
----------------------------------------
The reason of q->mq_freeze_depth == 1 turned out that loop_set_status()
forgot to call blk_mq_unfreeze_queue() at error paths for
info->lo_encrypt_type != NULL case.
----------------------------------------
[ 37.509497] CPU: 2 PID: 634 Comm: a.out Tainted: G W 4.16.0+ #457
[ 37.513608] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[ 37.518832] RIP: 0010:blk_freeze_queue_start+0x17/0x40
[ 37.521778] RSP: 0018:
ffffb0c2013e7c60 EFLAGS:
00010246
[ 37.524078] RAX:
0000000000000000 RBX:
ffff8b07b1519798 RCX:
0000000000000000
[ 37.527015] RDX:
0000000000000002 RSI:
ffffb0c2013e7cc0 RDI:
ffff8b07b1519798
[ 37.529934] RBP:
ffffb0c2013e7cc0 R08:
0000000000000008 R09:
47a189966239b898
[ 37.532684] R10:
dad78b99b278552f R11:
9332dca72259d5ef R12:
ffff8b07acd73678
[ 37.535452] R13:
0000000000004c04 R14:
0000000000000000 R15:
ffff8b07b841e940
[ 37.538186] FS:
00007fede33b9740(0000) GS:
ffff8b07b8e80000(0000) knlGS:
0000000000000000
[ 37.541168] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 37.543590] CR2:
00000000206fdf18 CR3:
0000000130b30006 CR4:
00000000000606e0
[ 37.546410] Call Trace:
[ 37.547902] blk_freeze_queue+0x9/0x30
[ 37.549968] loop_set_status+0x67/0x3c0 [loop]
[ 37.549975] loop_set_status64+0x3b/0x70 [loop]
[ 37.549986] lo_ioctl+0x223/0x810 [loop]
[ 37.549995] blkdev_ioctl+0x572/0x980
[ 37.550003] block_ioctl+0x34/0x40
[ 37.550006] do_vfs_ioctl+0xa7/0x6d0
[ 37.550017] ksys_ioctl+0x6b/0x80
[ 37.573076] SyS_ioctl+0x5/0x10
[ 37.574831] do_syscall_64+0x6e/0x270
[ 37.576769] entry_SYSCALL_64_after_hwframe+0x42/0xb7
----------------------------------------
[1] https://syzkaller.appspot.com/bug?id=
cd662bc3f6022c0979d01a262c318fab2ee9b56f
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <bot+48594378e9851eab70bcd6f99327c7db58c5a28a@syzkaller.appspotmail.com>
Fixes:
ecdd09597a572513 ("block/loop: fix race between I/O and set_status")
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: stable <stable@vger.kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 17 Apr 2018 12:56:21 +0000 (14:56 +0200)]
Revert "perf tests: Decompress kernel module before objdump"
This reverts commit
b0761b57e0bf11ada4c45e68f4cba1370363d90d which is
commit
94df1040b1e6aacd8dec0ba3c61d7e77cd695f26 upstream.
It breaks the build of perf on 4.4.y, so I'm dropping it.
Reported-by: Pavlos Parissis <pavlos.parissis@gmail.com>
Reported-by: Lei Chen <chenl.lei@gmail.com>
Reported-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 16 Feb 2018 15:26:57 +0000 (16:26 +0100)]
radeon: hide pointless #warning when compile testing
commit
c02216acf4177c4411d33735c81cad687790fa59 upstream.
In randconfig testing, we sometimes get this warning:
drivers/gpu/drm/radeon/radeon_object.c: In function 'radeon_bo_create':
drivers/gpu/drm/radeon/radeon_object.c:242:2: error: #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance thanks to write-combining [-Werror=cpp]
#warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance \
This is rather annoying since almost all other code produces no build-time
output unless we have found a real bug. We already fixed this in the
amdgpu driver in commit
31bb90f1cd08 ("drm/amdgpu: shut up #warning for
compile testing") by adding a CONFIG_COMPILE_TEST check last year and
agreed to do the same here, but both Michel and I then forgot about it
until I came across the issue again now.
For stable kernels, as this is one of very few remaining randconfig
warnings in 4.14.
Cc: stable@vger.kernel.org
Link: https://patchwork.kernel.org/patch/9550009/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Hunter [Wed, 7 Mar 2018 14:02:24 +0000 (16:02 +0200)]
perf intel-pt: Fix timestamp following overflow
commit
91d29b288aed3406caf7c454bf2b898c96cfd177 upstream.
timestamp_insn_cnt is used to estimate the timestamp based on the number of
instructions since the last known timestamp.
If the estimate is not accurate enough decoding might not be correctly
synchronized with side-band events causing more trace errors.
However there are always timestamps following an overflow, so the
estimate is not needed and can indeed result in more errors.
Suppress the estimate by setting timestamp_insn_cnt to zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Hunter [Wed, 7 Mar 2018 14:02:23 +0000 (16:02 +0200)]
perf intel-pt: Fix error recovery from missing TIP packet
commit
1c196a6c771c47a2faa63d38d913e03284f73a16 upstream.
When a TIP packet is expected but there is a different packet, it is an
error. However the unexpected packet might be something important like a
TSC packet, so after the error, it is necessary to continue from there,
rather than the next packet. That is achieved by setting pkt_step to
zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Hunter [Wed, 7 Mar 2018 14:02:22 +0000 (16:02 +0200)]
perf intel-pt: Fix sync_switch
commit
63d8e38f6ae6c36dd5b5ba0e8c112e8861532ea2 upstream.
sync_switch is a facility to synchronize decoding more closely with the
point in the kernel when the context actually switched.
The flag when sync_switch is enabled was global to the decoding, whereas
it is really specific to the CPU.
The trace data for different CPUs is put on different queues, so add
sync_switch to the intel_pt_queue structure and use that in preference
to the global setting in the intel_pt structure.
That fixes problems decoding one CPU's trace because sync_switch was
disabled on a different CPU's queue.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Hunter [Wed, 7 Mar 2018 14:02:21 +0000 (16:02 +0200)]
perf intel-pt: Fix overlap detection to identify consecutive buffers correctly
commit
117db4b27bf08dba412faf3924ba55fe970c57b8 upstream.
Overlap detection was not not updating the buffer's 'consecutive' flag.
Marking buffers consecutive has the advantage that decoding begins from
the start of the buffer instead of the first PSB. Fix overlap detection
to identify consecutive buffers correctly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Sun, 25 Mar 2018 21:53:22 +0000 (23:53 +0200)]
parisc: Fix out of array access in match_pci_device()
commit
615b2665fd20c327b631ff1e79426775de748094 upstream.
As found by the ubsan checker, the value of the 'index' variable can be
out of range for the bc[] array:
UBSAN: Undefined behaviour in arch/parisc/kernel/drivers.c:655:21
index 6 is out of range for type 'char [6]'
Backtrace:
[<
104fa850>] __ubsan_handle_out_of_bounds+0x68/0x80
[<
1019d83c>] check_parent+0xc0/0x170
[<
1019d91c>] descend_children+0x30/0x6c
[<
1059e164>] device_for_each_child+0x60/0x98
[<
1019cd54>] parse_tree_node+0x40/0x54
[<
1019d86c>] check_parent+0xf0/0x170
[<
1019d91c>] descend_children+0x30/0x6c
[<
1059e164>] device_for_each_child+0x60/0x98
[<
1019d938>] descend_children+0x4c/0x6c
[<
1059e164>] device_for_each_child+0x60/0x98
[<
1019cd54>] parse_tree_node+0x40/0x54
[<
1019cffc>] hwpath_to_device+0xa4/0xc4
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mauro Carvalho Chehab [Wed, 28 Mar 2018 17:59:22 +0000 (13:59 -0400)]
media: v4l2-compat-ioctl32: don't oops on overlay
commit
85ea29f19eab56ec16ec6b92bc67305998706afa upstream.
At put_v4l2_window32(), it tries to access kp->clips. However,
kp points to an userspace pointer. So, it should be obtained
via get_user(), otherwise it can OOPS:
vivid-000: ================== END STATUS ==================
BUG: unable to handle kernel paging request at
00000000fffb18e0
IP: [<
ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev]
PGD
3f5776067 PUD
3f576f067 PMD
3f5769067 PTE
800000042548f067
Oops: 0001 [#1] SMP
Modules linked in: vivid videobuf2_vmalloc videobuf2_memops v4l2_dv_timings videobuf2_core v4l2_common videodev media xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill binfmt_misc snd_hda_codec_hdmi i915 snd_hda_intel snd_hda_controller snd_hda_codec intel_rapl x86_pkg_temp_thermal snd_hwdep intel_powerclamp snd_pcm coretemp snd_seq_midi kvm_intel kvm snd_seq_midi_event snd_rawmidi i2c_algo_bit drm_kms_helper snd_seq drm crct10dif_pclmul e1000e snd_seq_device crc32_pclmul snd_timer ghash_clmulni_intel snd mei_me mei ptp pps_core soundcore lpc_ich video crc32c_intel [last unloaded: media]
CPU: 2 PID: 28332 Comm: v4l2-compliance Not tainted 3.18.102+ #107
Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017
task:
ffff8804293f8000 ti:
ffff8803f5640000 task.ti:
ffff8803f5640000
RIP: 0010:[<
ffffffffc05468d9>] [<
ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev]
RSP: 0018:
ffff8803f5643e28 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
0000000000000000 RCX:
00000000fffb1ab4
RDX:
00000000fffb1a68 RSI:
00000000fffb18d8 RDI:
00000000fffb1aa8
RBP:
ffff8803f5643e48 R08:
0000000000000001 R09:
ffff8803f54b0378
R10:
0000000000000000 R11:
0000000000000168 R12:
00000000fffb18c0
R13:
00000000fffb1a94 R14:
00000000fffb18c8 R15:
0000000000000000
FS:
0000000000000000(0000) GS:
ffff880456d00000(0063) knlGS:
00000000f7100980
CS: 0010 DS: 002b ES: 002b CR0:
0000000080050033
CR2:
00000000fffb18e0 CR3:
00000003f552b000 CR4:
00000000003407e0
Stack:
00000000fffb1a94 00000000c0cc5640 0000000000000056 ffff8804274f3600
ffff8803f5643ed0 ffffffffc0547e16 0000000000000003 ffff8803f5643eb0
ffffffff81301460 ffff88009db44b01 ffff880441942520 ffff8800c0d05640
Call Trace:
[<
ffffffffc0547e16>] v4l2_compat_ioctl32+0x12d6/0x1b1d [videodev]
[<
ffffffff81301460>] ? file_has_perm+0x70/0xc0
[<
ffffffff81252a2c>] compat_SyS_ioctl+0xec/0x1200
[<
ffffffff8173241a>] sysenter_dispatch+0x7/0x21
Code: 00 00 48 8b 80 48 c0 ff ff 48 83 e8 38 49 39 c6 0f 87 2b ff ff ff 49 8d 45 1c e8 a3 ce e3 c0 85 c0 0f 85 1a ff ff ff 41 8d 40 ff <4d> 8b 64 24 20 41 89 d5 48 8d 44 40 03 4d 8d 34 c4 eb 15 0f 1f
RIP [<
ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev]
RSP <
ffff8803f5643e28>
CR2:
00000000fffb18e0
Tested with vivid driver on Kernel v3.18.102.
Same bug happens upstream too:
BUG: KASAN: user-memory-access in __put_v4l2_format32+0x98/0x4d0 [videodev]
Read of size 8 at addr
00000000ffe48400 by task v4l2-compliance/8713
CPU: 0 PID: 8713 Comm: v4l2-compliance Not tainted 4.16.0-rc4+ #108
Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017
Call Trace:
dump_stack+0x5c/0x7c
kasan_report+0x164/0x380
? __put_v4l2_format32+0x98/0x4d0 [videodev]
__put_v4l2_format32+0x98/0x4d0 [videodev]
v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev]
? __fsnotify_inode_delete+0x20/0x20
? __put_v4l2_format32+0x4d0/0x4d0 [videodev]
compat_SyS_ioctl+0x646/0x14d0
? do_ioctl+0x30/0x30
do_fast_syscall_32+0x191/0x3f4
entry_SYSENTER_compat+0x6b/0x7a
==================================================================
Disabling lock debugging due to kernel taint
BUG: unable to handle kernel paging request at
00000000ffe48400
IP: __put_v4l2_format32+0x98/0x4d0 [videodev]
PGD
3a22fb067 P4D
3a22fb067 PUD
39b6f0067 PMD
39b6f1067 PTE
80000003256af067
Oops: 0001 [#1] SMP KASAN
Modules linked in: vivid videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops v4l2_tpg v4l2_dv_timings videobuf2_v4l2 videobuf2_common v4l2_common videodev xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill ecdh_generic binfmt_misc snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp i915 coretemp snd_hda_intel snd_hda_codec kvm_intel snd_hwdep snd_hda_core kvm snd_pcm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_midi ghash_clmulni_intel snd_seq_midi_event i2c_algo_bit intel_cstate snd_rawmidi intel_uncore snd_seq drm_kms_helper e1000e snd_seq_device snd_timer intel_rapl_perf
drm ptp snd mei_me mei lpc_ich pps_core soundcore video crc32c_intel
CPU: 0 PID: 8713 Comm: v4l2-compliance Tainted: G B 4.16.0-rc4+ #108
Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017
RIP: 0010:__put_v4l2_format32+0x98/0x4d0 [videodev]
RSP: 0018:
ffff8803b9be7d30 EFLAGS:
00010282
RAX:
0000000000000000 RBX:
ffff8803ac983e80 RCX:
ffffffff8cd929f2
RDX:
1ffffffff1d0a149 RSI:
0000000000000297 RDI:
0000000000000297
RBP:
00000000ffe485c0 R08:
fffffbfff1cf5123 R09:
ffffffff8e7a8948
R10:
0000000000000001 R11:
fffffbfff1cf5122 R12:
00000000ffe483e0
R13:
00000000ffe485c4 R14:
ffff8803ac985918 R15:
00000000ffe483e8
FS:
0000000000000000(0000) GS:
ffff880407400000(0063) knlGS:
00000000f7a46980
CS: 0010 DS: 002b ES: 002b CR0:
0000000080050033
CR2:
00000000ffe48400 CR3:
00000003a83f2003 CR4:
00000000003606f0
Call Trace:
v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev]
? __fsnotify_inode_delete+0x20/0x20
? __put_v4l2_format32+0x4d0/0x4d0 [videodev]
compat_SyS_ioctl+0x646/0x14d0
? do_ioctl+0x30/0x30
do_fast_syscall_32+0x191/0x3f4
entry_SYSENTER_compat+0x6b/0x7a
Code: 4c 89 f7 4d 8d 7c 24 08 e8 e6 a4 69 cb 48 8b 83 98 1a 00 00 48 83 e8 10 49 39 c7 0f 87 9d 01 00 00 49 8d 7c 24 20 e8 c8 a4 69 cb <4d> 8b 74 24 20 4c 89 ef 4c 89 fe ba 10 00 00 00 e8 23 d9 08 cc
RIP: __put_v4l2_format32+0x98/0x4d0 [videodev] RSP:
ffff8803b9be7d30
CR2:
00000000ffe48400
cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaegeuk Kim [Sat, 21 Apr 2018 06:44:59 +0000 (23:44 -0700)]
f2fs: check cap_resource only for data blocks
Cherry-pick from origin/upstream-f2fs-stable-linux-4.4.y:
commit
f819874f58cf ("f2fs: check cap_resource only for data blocks")
This patch changes the rule to check cap_resource for data blocks, not inode
or node blocks in order to avoid selinux denial.
Change-Id: I875d7ccf7cce7b833a1c11cb0eef0b504b823c4a
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>