OSDN Git Service
David S. Miller [Sat, 27 Apr 2019 21:00:19 +0000 (17:00 -0400)]
Merge branch 'bnxt_en-Misc-bug-fixes'
Michael Chan says:
====================
bnxt_en: Misc. bug fixes.
6 miscellaneous bug fixes covering several issues in error code paths,
a setup issue for statistics DMA, and an improvement for setting up
multicast address filters.
Please queue these for stable as well.
Patch #5 (bnxt_en: Fix statistics context reservation logic) is for the
most recent 5.0 stable only. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Fri, 26 Apr 2019 02:31:55 +0000 (22:31 -0400)]
bnxt_en: Fix uninitialized variable usage in bnxt_rx_pkt().
In bnxt_rx_pkt(), if the driver encounters BD errors, it will recycle
the buffers and jump to the end where the uninitailized variable "len"
is referenced. Fix it by adding a new jump label that will skip
the length update. This is the most correct fix since the length
may not be valid when we get this type of error.
Fixes:
6a8788f25625 ("bnxt_en: add support for software dynamic interrupt moderation")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Fri, 26 Apr 2019 02:31:54 +0000 (22:31 -0400)]
bnxt_en: Fix statistics context reservation logic.
In an earlier commit that fixes the number of stats contexts to
reserve for the RDMA driver, we added a function parameter to pass in
the number of stats contexts to all the relevant functions. The passed
in parameter should have been used to set the enables field of the
firmware message.
Fixes:
780baad44f0f ("bnxt_en: Reserve 1 stat_ctx for RDMA driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Fri, 26 Apr 2019 02:31:53 +0000 (22:31 -0400)]
bnxt_en: Pass correct extended TX port statistics size to firmware.
If driver determines that extended TX port statistics are not supported
or allocation of the data structure fails, make sure to pass 0 TX stats
size to firmware to disable it. The firmware returned TX stats size should
also be set to 0 for consistency. This will prevent
bnxt_get_ethtool_stats() from accessing the NULL TX stats pointer in
case there is mismatch between firmware and driver.
Fixes:
36e53349b60b ("bnxt_en: Add additional extended port statistics.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Fri, 26 Apr 2019 02:31:52 +0000 (22:31 -0400)]
bnxt_en: Fix possible crash in bnxt_hwrm_ring_free() under error conditions.
If we encounter errors during open and proceed to clean up,
bnxt_hwrm_ring_free() may crash if the rings we try to free have never
been allocated. bnxt_cp_ring_for_rx() or bnxt_cp_ring_for_tx()
may reference pointers that have not been allocated.
Fix it by checking for valid fw_ring_id first before calling
bnxt_cp_ring_for_rx() or bnxt_cp_ring_for_tx().
Fixes:
2c61d2117ecb ("bnxt_en: Add helper functions to get firmware CP ring ID.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Fri, 26 Apr 2019 02:31:51 +0000 (22:31 -0400)]
bnxt_en: Free short FW command HWRM memory in error path in bnxt_init_one()
In the bnxt_init_one() error path, short FW command request memory
is not freed. This patch fixes it.
Fixes:
e605db801bde ("bnxt_en: Support for Short Firmware Message")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Fri, 26 Apr 2019 02:31:50 +0000 (22:31 -0400)]
bnxt_en: Improve multicast address setup logic.
The driver builds a list of multicast addresses and sends it to the
firmware when the driver's ndo_set_rx_mode() is called. In rare
cases, the firmware can fail this call if internal resources to
add multicast addresses are exhausted. In that case, we should
try the call again by setting the ALL_MCAST flag which is more
guaranteed to succeed.
Fixes:
c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Wed, 24 Apr 2019 22:33:00 +0000 (00:33 +0200)]
net: phy: marvell: Fix buffer overrun with stats counters
marvell_get_sset_count() returns how many statistics counters there
are. If the PHY supports fibre, there are 3, otherwise two.
marvell_get_strings() does not make this distinction, and always
returns 3 strings. This then often results in writing past the end
of the buffer for the strings.
Fixes:
2170fef78a40 ("Marvell phy: add field to get errors from fiber link.")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcel Holtmann [Wed, 24 Apr 2019 20:18:53 +0000 (22:18 +0200)]
genetlink: use idr_alloc_cyclic for family->id assignment
When allocating the next family->id it makes more sense to use
idr_alloc_cyclic to avoid re-using a previously used family->id as much
as possible.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjørn Mork [Wed, 24 Apr 2019 17:12:46 +0000 (19:12 +0200)]
qmi_wwan: new Wistron, ZTE and D-Link devices
Adding device entries found in vendor modified versions of this
driver. Function maps for some of the devices follow:
WNC D16Q1, D16Q5, D18Q1 LTE CAT3 module (1435:0918)
MI_00 Qualcomm HS-USB Diagnostics
MI_01 Android Debug interface
MI_02 Qualcomm HS-USB Modem
MI_03 Qualcomm Wireless HS-USB Ethernet Adapter
MI_04 Qualcomm Wireless HS-USB Ethernet Adapter
MI_05 Qualcomm Wireless HS-USB Ethernet Adapter
MI_06 USB Mass Storage Device
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1435 ProdID=0918 Rev= 2.32
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=
0123456789ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
WNC D18 LTE CAT3 module (1435:d182)
MI_00 Qualcomm HS-USB Diagnostics
MI_01 Androd Debug interface
MI_02 Qualcomm HS-USB Modem
MI_03 Qualcomm HS-USB NMEA
MI_04 Qualcomm Wireless HS-USB Ethernet Adapter
MI_05 Qualcomm Wireless HS-USB Ethernet Adapter
MI_06 USB Mass Storage Device
ZM8510/ZM8620/ME3960 (19d2:0396)
MI_00 ZTE Mobile Broadband Diagnostics Port
MI_01 ZTE Mobile Broadband AT Port
MI_02 ZTE Mobile Broadband Modem
MI_03 ZTE Mobile Broadband NDIS Port (qmi_wwan)
MI_04 ZTE Mobile Broadband ADB Port
ME3620_X (19d2:1432)
MI_00 ZTE Diagnostics Device
MI_01 ZTE UI AT Interface
MI_02 ZTE Modem Device
MI_03 ZTE Mobile Broadband Network Adapter
MI_04 ZTE Composite ADB Interface
Reported-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fabien Dessenne [Wed, 24 Apr 2019 09:35:49 +0000 (11:35 +0200)]
net: ethernet: stmmac: manage the get_irq probe defer case
Manage the -EPROBE_DEFER error case for "stm32_pwr_wakeup" IRQ.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 23 Apr 2019 16:43:26 +0000 (09:43 -0700)]
l2tp: use rcu_dereference_sk_user_data() in l2tp_udp_encap_recv()
Canonical way to fetch sk_user_data from an encap_rcv() handler called
from UDP stack in rcu protected section is to use rcu_dereference_sk_user_data(),
otherwise compiler might read it multiple times.
Fixes:
d00fa9adc528 ("il2tp: fix races with tunnel socket close")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 26 Apr 2019 05:54:42 +0000 (01:54 -0400)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
pull-request: bpf 2019-04-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) the bpf verifier fix to properly mark registers in all stack frames, from Paul.
2) preempt_enable_no_resched->preempt_enable fix, from Peter.
3) other misc fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Zijlstra [Tue, 23 Apr 2019 19:55:59 +0000 (21:55 +0200)]
bpf: Fix preempt_enable_no_resched() abuse
Unless the very next line is schedule(), or implies it, one must not use
preempt_enable_no_resched(). It can cause a preemption to go missing and
thereby cause arbitrary delays, breaking the PREEMPT=y invariant.
Cc: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Paul Chaignon [Wed, 24 Apr 2019 19:51:26 +0000 (21:51 +0200)]
selftests/bpf: test cases for pkt/null checks in subprogs
The first test case, for pointer null checks, is equivalent to the
following pseudo-code. It checks that the verifier does not complain on
line 6 and recognizes that ptr isn't null.
1: ptr = bpf_map_lookup_elem(map, &key);
2: ret = subprog(ptr) {
3: return ptr != NULL;
4: }
5: if (ret)
6: value = *ptr;
The second test case, for packet bound checks, is equivalent to the
following pseudo-code. It checks that the verifier does not complain on
line 7 and recognizes that the packet is at least 1 byte long.
1: pkt_end = ctx.pkt_end;
2: ptr = ctx.pkt + 8;
3: ret = subprog(ptr, pkt_end) {
4: return ptr <= pkt_end;
5: }
6: if (ret)
7: value = *(u8 *)ctx.pkt;
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Paul Chaignon [Wed, 24 Apr 2019 19:50:42 +0000 (21:50 +0200)]
bpf: mark registers in all frames after pkt/null checks
In case of a null check on a pointer inside a subprog, we should mark all
registers with this pointer as either safe or unknown, in both the current
and previous frames. Currently, only spilled registers and registers in
the current frame are marked. Packet bound checks in subprogs have the
same issue. This patch fixes it to mark registers in previous frames as
well.
A good reproducer for null checks looks as follow:
1: ptr = bpf_map_lookup_elem(map, &key);
2: ret = subprog(ptr) {
3: return ptr != NULL;
4: }
5: if (ret)
6: value = *ptr;
With the above, the verifier will complain on line 6 because it sees ptr
as map_value_or_null despite the null check in subprog 1.
Note that this patch fixes another resulting bug when using
bpf_sk_release():
1: sk = bpf_sk_lookup_tcp(...);
2: subprog(sk) {
3: if (sk)
4: bpf_sk_release(sk);
5: }
6: if (!sk)
7: return 0;
8: return 1;
In the above, mark_ptr_or_null_regs will warn on line 6 because it will
try to free the reference state, even though it was already freed on
line 3.
Fixes:
f4d7e40a5b71 ("bpf: introduce function calls (verification)")
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Matteo Croce [Sat, 13 Apr 2019 01:37:32 +0000 (03:37 +0200)]
libbpf: add binary to gitignore
Some binaries are generated when building libbpf from tools/lib/bpf/,
namely libbpf.so.0.0.2 and libbpf.so.0.
Add them to the local .gitignore.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alban Crequy [Fri, 12 Apr 2019 12:40:50 +0000 (14:40 +0200)]
tools: bpftool: fix infinite loop in map create
"bpftool map create" has an infinite loop on "while (argc)". The error
case is missing.
Symptoms: when forgetting to type the keyword 'type' in front of 'hash':
$ sudo bpftool map create /sys/fs/bpf/dir/foobar hash key 8 value 8 entries 128
(infinite loop, taking all the CPU)
^C
After the patch:
$ sudo bpftool map create /sys/fs/bpf/dir/foobar hash key 8 value 8 entries 128
Error: unknown arg hash
Fixes:
0b592b5a01be ("tools: bpftool: add map create command")
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
YueHaibing [Wed, 10 Apr 2019 13:49:23 +0000 (21:49 +0800)]
MIPS: eBPF: Make ebpf_to_mips_reg() static
Fix sparse warning:
arch/mips/net/ebpf_jit.c:196:5: warning:
symbol 'ebpf_to_mips_reg' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Linus Torvalds [Wed, 24 Apr 2019 23:18:59 +0000 (16:18 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"Just the usual assortment of small'ish fixes:
1) Conntrack timeout is sometimes not initialized properly, from
Alexander Potapenko.
2) Add a reasonable range limit to tcp_min_rtt_wlen to avoid
undefined behavior. From ZhangXiaoxu.
3) des1 field of descriptor in stmmac driver is initialized with the
wrong variable. From Yue Haibing.
4) Increase mlxsw pci sw reset timeout a little bit more, from Ido
Schimmel.
5) Match IOT2000 stmmac devices more accurately, from Su Bao Cheng.
6) Fallback refcount fix in TLS code, from Jakub Kicinski.
7) Fix max MTU check when using XDP in mlx5, from Maxim Mikityanskiy.
8) Fix recursive locking in team driver, from Hangbin Liu.
9) Fix tls_set_device_offload_Rx() deadlock, from Jakub Kicinski.
10) Don't use napi_alloc_frag() outside of softiq context of socionext
driver, from Ilias Apalodimas.
11) MAC address increment overflow in ncsi, from Tao Ren.
12) Fix a regression in 8K/1M pool switching of RDS, from Zhu Yanjun.
13) ipv4_link_failure has to validate the headers that are actually
there because RAW sockets can pass in arbitrary garbage, from Eric
Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
ipv4: add sanity checks in ipv4_link_failure()
net/rose: fix unbound loop in rose_loopback_timer()
rxrpc: fix race condition in rxrpc_input_packet()
net: rds: exchange of 8K and 1M pool
net: vrf: Fix operation not supported when set vrf mac
net/ncsi: handle overflow when incrementing mac address
net: socionext: replace napi_alloc_frag with the netdev variant on init
net: atheros: fix spelling mistake "underun" -> "underrun"
spi: ST ST95HF NFC: declare missing of table
spi: Micrel eth switch: declare missing of table
net: stmmac: move stmmac_check_ether_addr() to driver probe
netfilter: fix nf_l4proto_log_invalid to log invalid packets
netfilter: never get/set skb->tstamp
netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ON
Documentation: decnet: remove reference to CONFIG_DECNET_ROUTE_FWMARK
dt-bindings: add an explanation for internal phy-mode
net/tls: don't leak IV and record seq when offload fails
net/tls: avoid potential deadlock in tls_set_device_offload_rx()
selftests/net: correct the return value for run_afpackettests
team: fix possible recursive locking when add slaves
...
Linus Torvalds [Wed, 24 Apr 2019 23:15:38 +0000 (16:15 -0700)]
Merge tag 'leds-for-5.1-rc7' of git://git./linux/kernel/git/j.anaszewski/linux-leds
Pull LED update from Jacek Anaszewski:
"A single change to MAINTAINERS:
We announce a new LED reviewer - Dan Murphy"
* tag 'leds-for-5.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
MAINTAINERS: LEDs: Add designated reviewer for LED subsystem
Eric Dumazet [Wed, 24 Apr 2019 15:04:05 +0000 (08:04 -0700)]
ipv4: add sanity checks in ipv4_link_failure()
Before calling __ip_options_compile(), we need to ensure the network
header is a an IPv4 one, and that it is already pulled in skb->head.
RAW sockets going through a tunnel can end up calling ipv4_link_failure()
with total garbage in the skb, or arbitrary lengthes.
syzbot report :
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline]
BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123
Write of size 69 at addr
ffff888096abf068 by task syz-executor.4/9204
CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
check_memory_region_inline mm/kasan/generic.c:185 [inline]
check_memory_region+0x123/0x190 mm/kasan/generic.c:191
memcpy+0x38/0x50 mm/kasan/common.c:133
memcpy include/linux/string.h:355 [inline]
__ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123
__icmp_send+0x725/0x1400 net/ipv4/icmp.c:695
ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204
dst_link_failure include/net/dst.h:427 [inline]
vti6_xmit net/ipv6/ip6_vti.c:514 [inline]
vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553
__netdev_start_xmit include/linux/netdevice.h:4414 [inline]
netdev_start_xmit include/linux/netdevice.h:4423 [inline]
xmit_one net/core/dev.c:3292 [inline]
dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308
__dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878
dev_queue_xmit+0x18/0x20 net/core/dev.c:3911
neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527
neigh_output include/net/neighbour.h:508 [inline]
ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229
ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317
NF_HOOK_COND include/linux/netfilter.h:278 [inline]
ip_output+0x21f/0x670 net/ipv4/ip_output.c:405
dst_output include/net/dst.h:444 [inline]
NF_HOOK include/linux/netfilter.h:289 [inline]
raw_send_hdrinc net/ipv4/raw.c:432 [inline]
raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663
inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg+0xdd/0x130 net/socket.c:661
sock_write_iter+0x27c/0x3e0 net/socket.c:988
call_write_iter include/linux/fs.h:1866 [inline]
new_sync_write+0x4c7/0x760 fs/read_write.c:474
__vfs_write+0xe4/0x110 fs/read_write.c:487
vfs_write+0x20c/0x580 fs/read_write.c:549
ksys_write+0x14f/0x2d0 fs/read_write.c:599
__do_sys_write fs/read_write.c:611 [inline]
__se_sys_write fs/read_write.c:608 [inline]
__x64_sys_write+0x73/0xb0 fs/read_write.c:608
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458c29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f293b44bc78 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
0000000000458c29
RDX:
0000000000000014 RSI:
00000000200002c0 RDI:
0000000000000003
RBP:
000000000073bf00 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f293b44c6d4
R13:
00000000004c8623 R14:
00000000004ded68 R15:
00000000ffffffff
The buggy address belongs to the page:
page:
ffffea00025aafc0 count:0 mapcount:0 mapping:
0000000000000000 index:0x0
flags: 0x1fffc0000000000()
raw:
01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000
raw:
0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2
ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00
>
ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00
^
ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00
ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Fixes:
ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Suryaputra <ssuryaextr@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 24 Apr 2019 12:35:00 +0000 (05:35 -0700)]
net/rose: fix unbound loop in rose_loopback_timer()
This patch adds a limit on the number of skbs that fuzzers can queue
into loopback_queue. 1000 packets for rose loopback seems more than enough.
Then, since we now have multiple cpus in most linux hosts,
we also need to limit the number of skbs rose_loopback_timer()
can dequeue at each round.
rose_loopback_queue() can be drop-monitor friendly, calling
consume_skb() or kfree_skb() appropriately.
Finally, use mod_timer() instead of del_timer() + add_timer()
syzbot report was :
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 0-...!: (10499 ticks this GP) idle=536/1/0x4000000000000002 softirq=103291/103291 fqs=34
rcu: (t=10500 jiffies g=140321 q=323)
rcu: rcu_preempt kthread starved for 10426 jiffies! g140321 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=1
rcu: RCU grace-period kthread stack dump:
rcu_preempt I29168 10 2 0x80000000
Call Trace:
context_switch kernel/sched/core.c:2877 [inline]
__schedule+0x813/0x1cc0 kernel/sched/core.c:3518
schedule+0x92/0x180 kernel/sched/core.c:3562
schedule_timeout+0x4db/0xfd0 kernel/time/timer.c:1803
rcu_gp_fqs_loop kernel/rcu/tree.c:1971 [inline]
rcu_gp_kthread+0x962/0x17b0 kernel/rcu/tree.c:2128
kthread+0x357/0x430 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
NMI backtrace for cpu 0
CPU: 0 PID: 7632 Comm: kworker/0:4 Not tainted 5.1.0-rc5+ #172
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events iterate_cleanup_work
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
nmi_cpu_backtrace.cold+0x63/0xa4 lib/nmi_backtrace.c:101
nmi_trigger_cpumask_backtrace+0x1be/0x236 lib/nmi_backtrace.c:62
arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38
trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline]
rcu_dump_cpu_stacks+0x183/0x1cf kernel/rcu/tree.c:1223
print_cpu_stall kernel/rcu/tree.c:1360 [inline]
check_cpu_stall kernel/rcu/tree.c:1434 [inline]
rcu_pending kernel/rcu/tree.c:3103 [inline]
rcu_sched_clock_irq.cold+0x500/0xa4a kernel/rcu/tree.c:2544
update_process_times+0x32/0x80 kernel/time/timer.c:1635
tick_sched_handle+0xa2/0x190 kernel/time/tick-sched.c:161
tick_sched_timer+0x47/0x130 kernel/time/tick-sched.c:1271
__run_hrtimer kernel/time/hrtimer.c:1389 [inline]
__hrtimer_run_queues+0x33e/0xde0 kernel/time/hrtimer.c:1451
hrtimer_interrupt+0x314/0x770 kernel/time/hrtimer.c:1509
local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1035 [inline]
smp_apic_timer_interrupt+0x120/0x570 arch/x86/kernel/apic/apic.c:1060
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807
RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x50 kernel/kcov.c:95
Code: 89 25 b4 6e ec 08 41 bc f4 ff ff ff e8 cd 5d ea ff 48 c7 05 9e 6e ec 08 00 00 00 00 e9 a4 e9 ff ff 90 90 90 90 90 90 90 90 90 <55> 48 89 e5 48 8b 75 08 65 48 8b 04 25 00 ee 01 00 65 8b 15 c8 60
RSP: 0018:
ffff8880ae807ce0 EFLAGS:
00000286 ORIG_RAX:
ffffffffffffff13
RAX:
ffff88806fd40640 RBX:
dffffc0000000000 RCX:
ffffffff863fbc56
RDX:
0000000000000100 RSI:
ffffffff863fbc1d RDI:
ffff88808cf94228
RBP:
ffff8880ae807d10 R08:
ffff88806fd40640 R09:
ffffed1015d00f8b
R10:
ffffed1015d00f8a R11:
0000000000000003 R12:
ffff88808cf941c0
R13:
00000000fffff034 R14:
ffff8882166cd840 R15:
0000000000000000
rose_loopback_timer+0x30d/0x3f0 net/rose/rose_loopback.c:91
call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
expire_timers kernel/time/timer.c:1362 [inline]
__run_timers kernel/time/timer.c:1681 [inline]
__run_timers kernel/time/timer.c:1649 [inline]
run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
__do_softirq+0x266/0x95a kernel/softirq.c:293
do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1027
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 24 Apr 2019 16:44:11 +0000 (09:44 -0700)]
rxrpc: fix race condition in rxrpc_input_packet()
After commit
5271953cad31 ("rxrpc: Use the UDP encap_rcv hook"),
rxrpc_input_packet() is directly called from lockless UDP receive
path, under rcu_read_lock() protection.
It must therefore use RCU rules :
- udp_sk->sk_user_data can be cleared at any point in this function.
rcu_dereference_sk_user_data() is what we need here.
- Also, since sk_user_data might have been set in rxrpc_open_socket()
we must observe a proper RCU grace period before kfree(local) in
rxrpc_lookup_local()
v4: @local can be NULL in xrpc_lookup_local() as reported by kbuild test robot <lkp@intel.com>
and Julia Lawall <julia.lawall@lip6.fr>, thanks !
v3,v2 : addressed David Howells feedback, thanks !
syzbot reported :
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 19236 Comm: syz-executor703 Not tainted 5.1.0-rc6 #79
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__lock_acquire+0xbef/0x3fb0 kernel/locking/lockdep.c:3573
Code: 00 0f 85 a5 1f 00 00 48 81 c4 10 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 21 00 00 49 81 7d 00 20 54 9c 89 0f 84 cf f4
RSP: 0018:
ffff88809d7aef58 EFLAGS:
00010002
RAX:
dffffc0000000000 RBX:
0000000000000000 RCX:
0000000000000000
RDX:
0000000000000026 RSI:
0000000000000000 RDI:
0000000000000001
RBP:
ffff88809d7af090 R08:
0000000000000001 R09:
0000000000000001
R10:
ffffed1015d05bc7 R11:
ffff888089428600 R12:
0000000000000000
R13:
0000000000000130 R14:
0000000000000001 R15:
0000000000000001
FS:
00007f059044d700(0000) GS:
ffff8880ae800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00000000004b6040 CR3:
00000000955ca000 CR4:
00000000001406f0
Call Trace:
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4211
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152
skb_queue_tail+0x26/0x150 net/core/skbuff.c:2972
rxrpc_reject_packet net/rxrpc/input.c:1126 [inline]
rxrpc_input_packet+0x4a0/0x5536 net/rxrpc/input.c:1414
udp_queue_rcv_one_skb+0xaf2/0x1780 net/ipv4/udp.c:2011
udp_queue_rcv_skb+0x128/0x730 net/ipv4/udp.c:2085
udp_unicast_rcv_skb.isra.0+0xb9/0x360 net/ipv4/udp.c:2245
__udp4_lib_rcv+0x701/0x2ca0 net/ipv4/udp.c:2301
udp_rcv+0x22/0x30 net/ipv4/udp.c:2482
ip_protocol_deliver_rcu+0x60/0x8f0 net/ipv4/ip_input.c:208
ip_local_deliver_finish+0x23b/0x390 net/ipv4/ip_input.c:234
NF_HOOK include/linux/netfilter.h:289 [inline]
NF_HOOK include/linux/netfilter.h:283 [inline]
ip_local_deliver+0x1e9/0x520 net/ipv4/ip_input.c:255
dst_input include/net/dst.h:450 [inline]
ip_rcv_finish+0x1e1/0x300 net/ipv4/ip_input.c:413
NF_HOOK include/linux/netfilter.h:289 [inline]
NF_HOOK include/linux/netfilter.h:283 [inline]
ip_rcv+0xe8/0x3f0 net/ipv4/ip_input.c:523
__netif_receive_skb_one_core+0x115/0x1a0 net/core/dev.c:4987
__netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5099
netif_receive_skb_internal+0x117/0x660 net/core/dev.c:5202
napi_frags_finish net/core/dev.c:5769 [inline]
napi_gro_frags+0xade/0xd10 net/core/dev.c:5843
tun_get_user+0x2f24/0x3fb0 drivers/net/tun.c:1981
tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2027
call_write_iter include/linux/fs.h:1866 [inline]
do_iter_readv_writev+0x5e1/0x8e0 fs/read_write.c:681
do_iter_write fs/read_write.c:957 [inline]
do_iter_write+0x184/0x610 fs/read_write.c:938
vfs_writev+0x1b3/0x2f0 fs/read_write.c:1002
do_writev+0x15e/0x370 fs/read_write.c:1037
__do_sys_writev fs/read_write.c:1110 [inline]
__se_sys_writev fs/read_write.c:1107 [inline]
__x64_sys_writev+0x75/0xb0 fs/read_write.c:1107
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes:
5271953cad31 ("rxrpc: Use the UDP encap_rcv hook")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Murphy [Tue, 23 Apr 2019 20:00:24 +0000 (15:00 -0500)]
MAINTAINERS: LEDs: Add designated reviewer for LED subsystem
Add a designated reviewer for the LED subsystem as there
are already two maintainers assigned.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Zhu Yanjun [Wed, 24 Apr 2019 06:56:42 +0000 (02:56 -0400)]
net: rds: exchange of 8K and 1M pool
Before the commit
490ea5967b0d ("RDS: IB: move FMR code to its own file"),
when the dirty_count is greater than 9/10 of max_items of 8K pool,
1M pool is used, Vice versa. After the commit
490ea5967b0d ("RDS: IB: move
FMR code to its own file"), the above is removed. When we make the
following tests.
Server:
rds-stress -r 1.1.1.16 -D 1M
Client:
rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M
The following will appear.
"
connecting to 1.1.1.16:4000
negotiated options, tasks will start in 2 seconds
Starting up..header from 1.1.1.166:4001 to id 4001 bogus
..
tsks tx/s rx/s tx+rx K/s mbi K/s mbo K/s tx us/c rtt us
cpu %
1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00
1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00
1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00
1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00
1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00
...
"
So this exchange between 8K and 1M pool is added back.
Fixes: commit
490ea5967b0d ("RDS: IB: move FMR code to its own file")
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Miaohe Lin [Sat, 20 Apr 2019 04:09:39 +0000 (12:09 +0800)]
net: vrf: Fix operation not supported when set vrf mac
Vrf device is not able to change mac address now because lack of
ndo_set_mac_address. Complete this in case some apps need to do
this.
Reported-by: Hui Wang <wanghui104@huawei.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tao Ren [Wed, 24 Apr 2019 01:43:32 +0000 (01:43 +0000)]
net/ncsi: handle overflow when incrementing mac address
Previously BMC's MAC address is calculated by simply adding 1 to the
last byte of network controller's MAC address, and it produces incorrect
result when network controller's MAC address ends with 0xFF.
The problem can be fixed by calling eth_addr_inc() function to increment
MAC address; besides, the MAC address is also validated before assigning
to BMC.
Fixes:
cb10c7c0dfd9 ("net/ncsi: Add NCSI Broadcom OEM command")
Signed-off-by: Tao Ren <taoren@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 24 Apr 2019 04:08:52 +0000 (21:08 -0700)]
Merge tag 'drm-fixes-2019-04-24' of git://anongit.freedesktop.org/drm/drm
Pull drm regression fixes from Dave Airlie:
"We interrupt your regularly scheduled drm fixes for a regression
special.
The first is for a fix in i915 that had unexpected side effects
fallout in the userspace X.org modesetting driver where X would no
longer start. I got tired of the nitpicking and issued a large hammer
on it. The X.org driver is buggy, but blackscreen regressions are
worse.
The second was an oversight that myself and Gerd should have noticed
better, Gerd is trying to fix this properly, but the regression is too
large to leave, even if the original behaviour is bad in some cases,
it's clearly bad to break a bunch of working use cases.
I'll likely have a regular fixes pull later, but I really wanted to
highlight these"
* tag 'drm-fixes-2019-04-24' of git://anongit.freedesktop.org/drm/drm:
Revert "drm/virtio: drop prime import/export callbacks"
Revert "drm/i915/fbdev: Actually configure untiled displays"
Ilias Apalodimas [Tue, 23 Apr 2019 06:01:41 +0000 (09:01 +0300)]
net: socionext: replace napi_alloc_frag with the netdev variant on init
The netdev variant is usable on any context since it disables interrupts.
The napi variant of the call should only be used within softirq context.
Replace napi_alloc_frag on driver init with the correct netdev_alloc_frag
call
Changes since v1:
- Adjusted commit message
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Fixes:
4acb20b46214 ("net: socionext: different approach on DMA")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Tue, 23 Apr 2019 14:30:07 +0000 (15:30 +0100)]
net: atheros: fix spelling mistake "underun" -> "underrun"
There are spelling mistakes in structure elements, fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Airlie [Wed, 24 Apr 2019 00:52:20 +0000 (10:52 +1000)]
Revert "drm/virtio: drop prime import/export callbacks"
This patch does more harm than good, as it breaks both Xwayland and
gnome-shell with X11.
Xwayland requires DRI3 & DRI3 requires PRIME.
X11 crash for obscure double-free reason which are hard to debug
(starting X11 by hand doesn't trigger the crash).
I don't see an apparent problem implementing those stub prime
functions, they may return an error at run-time, and it seems to be
handled fine by GNOME at least.
This reverts commit
b318e3ff7ca065d6b107e424c85a63d7a6798a69.
[airlied:
This broke userspace for virtio-gpus, and regressed things from DRI3 to DRI2.
This brings back the original problem, but it's better than regressions.]
Fixes:
b318e3ff7ca065d6b107e424c85a63d7a6798a ("drm/virtio: drop prime import/export callbacks")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 24 Apr 2019 00:47:56 +0000 (10:47 +1000)]
Revert "drm/i915/fbdev: Actually configure untiled displays"
This reverts commit
d179b88deb3bf6fed4991a31fd6f0f2cad21fab5.
This commit is documented to break userspace X.org modesetting driver in certain configurations.
The X.org modesetting userspace driver is broken. No fixes are available yet. In order for this patch to be applied it either needs a config option or a workaround developed.
This has been reported a few times, saying it's a userspace problem is clearly against the regression rules.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109806
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: <stable@vger.kernel.org> # v3.19+
Linus Torvalds [Tue, 23 Apr 2019 20:40:55 +0000 (13:40 -0700)]
Merge tag 'nfsd-5.1-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfixes from Bruce Fields:
"Fix miscellaneous nfsd bugs, in NFSv4.1 callbacks, NFSv4.1
lock-notification callbacks, NFSv3 readdir encoding, and the
cache/upcall code"
* tag 'nfsd-5.1-1' of git://linux-nfs.org/~bfields/linux:
nfsd: wake blocked file lock waiters before sending callback
nfsd: wake waiters blocked on file_lock before deleting it
nfsd: Don't release the callback slot unless it was actually held
nfsd/nfsd3_proc_readdir: fix buffer count and page pointers
sunrpc: don't mark uninitialised items as VALID.
Linus Torvalds [Tue, 23 Apr 2019 20:34:17 +0000 (13:34 -0700)]
Merge tag 'syscalls-5.1' of git://git./linux/kernel/git/arnd/asm-generic
Pull syscall numbering updates from Arnd Bergmann:
"arch: add pidfd and io_uring syscalls everywhere
This comes a bit late, but should be in 5.1 anyway: we want the newly
added system calls to be synchronized across all architectures in the
release.
I hope that in the future, any newly added system calls can be added
to all architectures at the same time, and tested there while they are
in linux-next, avoiding dependencies between the architecture
maintainer trees and the tree that contains the new system call"
* tag 'syscalls-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: add pidfd and io_uring syscalls everywhere
Daniel Gomez [Mon, 22 Apr 2019 19:08:04 +0000 (21:08 +0200)]
spi: ST ST95HF NFC: declare missing of table
Add missing <of_device_id> table for SPI driver relying on SPI
device match since compatible is in a DT binding or in a DTS.
Before this patch:
modinfo drivers/nfc/st95hf/st95hf.ko | grep alias
alias: spi:st95hf
After this patch:
modinfo drivers/nfc/st95hf/st95hf.ko | grep alias
alias: spi:st95hf
alias: of:N*T*Cst,st95hfC*
alias: of:N*T*Cst,st95hf
Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Gomez [Mon, 22 Apr 2019 19:08:03 +0000 (21:08 +0200)]
spi: Micrel eth switch: declare missing of table
Add missing <of_device_id> table for SPI driver relying on SPI
device match since compatible is in a DT binding or in a DTS.
Before this patch:
modinfo drivers/net/phy/spi_ks8995.ko | grep alias
alias: spi:ksz8795
alias: spi:ksz8864
alias: spi:ks8995
After this patch:
modinfo drivers/net/phy/spi_ks8995.ko | grep alias
alias: spi:ksz8795
alias: spi:ksz8864
alias: spi:ks8995
alias: of:N*T*Cmicrel,ksz8795C*
alias: of:N*T*Cmicrel,ksz8795
alias: of:N*T*Cmicrel,ksz8864C*
alias: of:N*T*Cmicrel,ksz8864
alias: of:N*T*Cmicrel,ks8995C*
alias: of:N*T*Cmicrel,ks8995
Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vinod Koul [Mon, 22 Apr 2019 09:45:32 +0000 (15:15 +0530)]
net: stmmac: move stmmac_check_ether_addr() to driver probe
stmmac_check_ether_addr() checks the MAC address and assigns one in
driver open(). In many cases when we create slave netdevice, the dev
addr is inherited from master but the master dev addr maybe NULL at
that time, so move this call to driver probe so that address is
always valid.
Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org>
Tested-by: Xiaofei Shen <xiaofeis@codeaurora.org>
Signed-off-by: Sneh Shah <snehshah@codeaurora.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 23 Apr 2019 04:23:55 +0000 (21:23 -0700)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for your net tree:
1) Add a selftest for icmp packet too big errors with conntrack, from
Florian Westphal.
2) Validate inner header in ICMP error message does not lie to us
in conntrack, also from Florian.
3) Initialize ct->timeout to calm down KASAN, from Alexander Potapenko.
4) Skip ICMP error messages from tunnels in IPVS, from Julian Anastasov.
5) Use a hash to expose conntrack and expectation ID, from Florian Westphal.
6) Prevent shift wrap in nft_chain_parse_hook(), from Dan Carpenter.
7) Fix broken ICMP ID randomization with NAT, also from Florian.
8) Remove WARN_ON in ebtables compat that is reached via syzkaller,
from Florian Westphal.
9) Fix broken timestamps since
fb420d5d91c1 ("tcp/fq: move back to
CLOCK_MONOTONIC"), from Florian.
10) Fix logging of invalid packets in conntrack, from Andrei Vagin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Layton [Mon, 22 Apr 2019 16:34:24 +0000 (12:34 -0400)]
nfsd: wake blocked file lock waiters before sending callback
When a blocked NFS lock is "awoken" we send a callback to the server and
then wake any hosts waiting on it. If a client attempts to get a lock
and then drops off the net, we could end up waiting for a long time
until we end up waking locks blocked on that request.
So, wake any other waiting lock requests before sending the callback.
Do this by calling locks_delete_block in a new "prepare" phase for
CB_NOTIFY_LOCK callbacks.
URL: https://bugzilla.kernel.org/show_bug.cgi?id=203363
Fixes:
16306a61d3b7 ("fs/locks: always delete_block after waiting.")
Reported-by: Slawomir Pryczek <slawek1211@gmail.com>
Cc: Neil Brown <neilb@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Jeff Layton [Mon, 22 Apr 2019 16:34:23 +0000 (12:34 -0400)]
nfsd: wake waiters blocked on file_lock before deleting it
After a blocked nfsd file_lock request is deleted, knfsd will send a
callback to the client and then free the request. Commit
16306a61d3b7
("fs/locks: always delete_block after waiting.") changed it such that
locks_delete_block is always called on a request after it is awoken,
but that patch missed fixing up blocked nfsd request handling.
Call locks_delete_block on the block to wake up any locks still blocked
on the nfsd lock request before freeing it. Some of its callers already
do this however, so just remove those calls.
URL: https://bugzilla.kernel.org/show_bug.cgi?id=203363
Fixes:
16306a61d3b7 ("fs/locks: always delete_block after waiting.")
Reported-by: Slawomir Pryczek <slawek1211@gmail.com>
Cc: Neil Brown <neilb@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Linus Torvalds [Mon, 22 Apr 2019 18:54:47 +0000 (11:54 -0700)]
Merge tag 'mips_fixes_5.1_3' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A couple more MIPS fixes:
- Fix indirect syscall tracing & seccomp filtering for big endian
MIPS64 kernels, which previously loaded the syscall number
incorrectly & would always use zero.
- Fix performance counter IRQ setup for Atheros/ath79 SoCs, allowing
perf to function on those systems.
And not really a fix, but a useful addition:
- Add a Broadcom mailing list to the MAINTAINERS entry for BMIPS
systems to allow relevant engineers to track patch submissions"
* tag 'mips_fixes_5.1_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: perf: ath79: Fix perfcount IRQ assignment
MIPS: scall64-o32: Fix indirect syscall number load
MAINTAINERS: BMIPS: Add internal Broadcom mailing list
Andrei Vagin [Wed, 17 Apr 2019 16:49:44 +0000 (09:49 -0700)]
netfilter: fix nf_l4proto_log_invalid to log invalid packets
It doesn't log a packet if sysctl_log_invalid isn't equal to protonum
OR sysctl_log_invalid isn't equal to IPPROTO_RAW. This sentence is
always true. I believe we need to replace OR to AND.
Cc: Florian Westphal <fw@strlen.de>
Fixes:
c4f3db1595827 ("netfilter: conntrack: add and use nf_l4proto_log_invalid")
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Wed, 17 Apr 2019 00:17:23 +0000 (02:17 +0200)]
netfilter: never get/set skb->tstamp
setting net.netfilter.nf_conntrack_timestamp=1 breaks xmit with fq
scheduler. skb->tstamp might be "refreshed" using ktime_get_real(),
but fq expects CLOCK_MONOTONIC.
This patch removes all places in netfilter that check/set skb->tstamp:
1. To fix the bogus "start" time seen with conntrack timestamping for
outgoing packets, never use skb->tstamp and always use current time.
2. In nfqueue and nflog, only use skb->tstamp for incoming packets,
as determined by current hook (prerouting, input, forward).
3. xt_time has to use system clock as well rather than skb->tstamp.
We could still use skb->tstamp for prerouting/input/foward, but
I see no advantage to make this conditional.
Fixes:
fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC")
Cc: Eric Dumazet <edumazet@google.com>
Reported-by: Michal Soltys <soltys@ziu.info>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Sun, 14 Apr 2019 22:43:00 +0000 (00:43 +0200)]
netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ON
It means userspace gave us a ruleset where there is some other
data after the ebtables target but before the beginning of the next rule.
Fixes:
81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support")
Reported-by: syzbot+659574e7bcc7f7eb4df7@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Corentin Labbe [Sat, 20 Apr 2019 16:43:01 +0000 (16:43 +0000)]
Documentation: decnet: remove reference to CONFIG_DECNET_ROUTE_FWMARK
CONFIG_DECNET_ROUTE_FWMARK was removed in commit
47dcf0cb1005 ("[NET]: Rethink mark field in struct flowi")
Since nothing replace it (and nothindg need to replace it, simply remove
it from documentation.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Corentin Labbe [Sat, 20 Apr 2019 18:14:33 +0000 (18:14 +0000)]
dt-bindings: add an explanation for internal phy-mode
When working on the Allwinner internal PHY, the first work was to use
the "internal" mode, but some answer was made my mail on what are really
internal mean for PHY.
This patch write that in the doc.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 21 Apr 2019 17:45:57 +0000 (10:45 -0700)]
Linux 5.1-rc6
Jakub Kicinski [Fri, 19 Apr 2019 23:52:19 +0000 (16:52 -0700)]
net/tls: don't leak IV and record seq when offload fails
When device refuses the offload in tls_set_device_offload_rx()
it calls tls_sw_free_resources_rx() to clean up software context
state.
Unfortunately, tls_sw_free_resources_rx() does not free all
the state tls_set_sw_offload() allocated - it leaks IV and
sequence number buffers. All other code paths which lead to
tls_sw_release_resources_rx() (which tls_sw_free_resources_rx()
calls) free those right before the call.
Avoid the leak by moving freeing of iv and rec_seq into
tls_sw_release_resources_rx().
Fixes:
4799ac81e52a ("tls: Add rx inline crypto offload")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 19 Apr 2019 23:51:38 +0000 (16:51 -0700)]
net/tls: avoid potential deadlock in tls_set_device_offload_rx()
If device supports offload, but offload fails tls_set_device_offload_rx()
will call tls_sw_free_resources_rx() which (unhelpfully) releases
and reacquires the socket lock.
For a small fix release and reacquire the device_offload_lock.
Fixes:
4799ac81e52a ("tls: Add rx inline crypto offload")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Po-Hsu Lin [Fri, 19 Apr 2019 11:01:13 +0000 (19:01 +0800)]
selftests/net: correct the return value for run_afpackettests
The run_afpackettests will be marked as passed regardless the return
value of those sub-tests in the script:
--------------------
running psock_tpacket test
--------------------
[FAIL]
selftests: run_afpackettests [PASS]
Fix this by changing the return value for each tests.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 20 Apr 2019 19:55:23 +0000 (12:55 -0700)]
Merge tag 'nfs-for-5.1-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfix from Trond Myklebust:
"Fix a regression in which an RPC call can be tagged with an error
despite the transmission being successful"
* tag 'nfs-for-5.1-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Ignore queue transmission errors on successful transmission
Linus Torvalds [Sat, 20 Apr 2019 19:52:23 +0000 (12:52 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three minor fixes: two obvious ones in drivers and a fix to the SG_IO
path to correctly return status on error"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: aic7xxx: fix EISA support
Revert "scsi: fcoe: clear FC_RP_STARTED flags when receiving a LOGO"
scsi: core: set result when the command cannot be dispatched
Linus Torvalds [Sat, 20 Apr 2019 19:20:58 +0000 (12:20 -0700)]
Merge tag 'for-linus-
20190420' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A set of small fixes that should go into this series. This contains:
- Removal of unused queue member (Hou)
- Overflow bvec fix (Ming)
- Various little io_uring tweaks (me)
- kthread parking
- Only call cpu_possible() for verified CPU
- Drop unused 'file' argument to io_file_put()
- io_uring_enter vs io_uring_register deadlock fix
- CQ overflow fix
- BFQ internal depth update fix (me)"
* tag 'for-linus-
20190420' of git://git.kernel.dk/linux-block:
block: make sure that bvec length can't be overflow
block: kill all_q_node in request_queue
io_uring: fix CQ overflow condition
io_uring: fix possible deadlock between io_uring_{enter,register}
io_uring: drop io_file_put() 'file' argument
bfq: update internal depth state when queue depth changes
io_uring: only test SQPOLL cpu after we've verified it
io_uring: park SQPOLL thread if it's percpu
Linus Torvalds [Sat, 20 Apr 2019 17:43:37 +0000 (10:43 -0700)]
Merge tag 'i3c/fixes-for-5.1-rc6' of git://git./linux/kernel/git/i3c/linux
Pill i3c fixes from Boris Brezillon:
- fix the random PID check
- fix the disable controller logic in the designware driver
- fix I3C entry in MAINTAINERS
* tag 'i3c/fixes-for-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
MAINTAINERS: Fix the I3C entry
i3c: dw: Fix dw_i3c_master_disable controller by using correct mask
i3c: Fix the verification of random PID
Linus Torvalds [Sat, 20 Apr 2019 17:19:30 +0000 (10:19 -0700)]
Merge tag 'sound-5.1-rc6' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Two core fixes for long-standing bugs for the races at concurrent
device creation and deletion that were (unsurprisingly) spotted by
syzkaller with usb-fuzzer.
The rest are usual small HD-audio fixes"
* tag 'sound-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - add two more pin configuration sets to quirk table
ALSA: core: Fix card races between register and disconnect
ALSA: info: Fix racy addition/deletion of nodes
ALSA: hda: Initialize power_state field properly
Linus Torvalds [Sat, 20 Apr 2019 17:10:49 +0000 (10:10 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Misc clocksource driver fixes, and a sched-clock wrapping fix"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/sched_clock: Prevent generic sched_clock wrap caused by tick_freeze()
clocksource/drivers/timer-ti-dm: Remove omap_dm_timer_set_load_start
clocksource/drivers/oxnas: Fix OX820 compatible
clocksource/drivers/arm_arch_timer: Remove unneeded pr_fmt macro
clocksource/drivers/npcm: select TIMER_OF
Linus Torvalds [Sat, 20 Apr 2019 17:05:02 +0000 (10:05 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixes:
- various tooling fixes
- kretprobe fixes
- kprobes annotation fixes
- kprobes error checking fix
- fix the default events for AMD Family 17h CPUs
- PEBS fix
- AUX record fix
- address filtering fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Avoid kretprobe recursion bug
kprobes: Mark ftrace mcount handler functions nokprobe
x86/kprobes: Verify stack frame on kretprobe
perf/x86/amd: Add event map for AMD Family 17h
perf bpf: Return NULL when RB tree lookup fails in perf_env__find_btf()
perf tools: Fix map reference counting
perf evlist: Fix side band thread draining
perf tools: Check maps for bpf programs
perf bpf: Return NULL when RB tree lookup fails in perf_env__find_bpf_prog_info()
tools include uapi: Sync sound/asound.h copy
perf top: Always sample time to satisfy needs of use of ordered queuing
perf evsel: Use hweight64() instead of hweight_long(attr.sample_regs_user)
tools lib traceevent: Fix missing equality check for strcmp
perf stat: Disable DIR_FORMAT feature for 'perf stat record'
perf scripts python: export-to-sqlite.py: Fix use of parent_id in calls_view
perf header: Fix lock/unlock imbalances when processing BPF/BTF info
perf/x86: Fix incorrect PEBS_REGS
perf/ring_buffer: Fix AUX record suppression
perf/core: Fix the address filtering fix
kprobes: Fix error check when reusing optimized probes
Linus Torvalds [Sat, 20 Apr 2019 17:01:11 +0000 (10:01 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes all over the place: a console spam fix, section attributes
fixes, a KASLR fix, a TLB stack-variable alignment fix, a reboot
quirk, boot options related warnings fix, an LTO fix, a deadlock fix
and an RDT fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority
x86/cpu/bugs: Use __initconst for 'const' init data
x86/mm/KASLR: Fix the size of the direct mapping section
x86/Kconfig: Fix spelling mistake "effectivness" -> "effectiveness"
x86/mm/tlb: Revert "x86/mm: Align TLB invalidation info"
x86/reboot, efi: Use EFI reboot for Acer TravelMate X514-51T
x86/mm: Prevent bogus warnings with "noexec=off"
x86/build/lto: Fix truncated .bss with -fdata-sections
x86/speculation: Prevent deadlock on ssb_state::lock
x86/resctrl: Do not repeat rdtgroup mode initialization
Linus Torvalds [Sat, 20 Apr 2019 16:53:36 +0000 (09:53 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"A deadline scheduler warning/race fix, and a cfs_period_us quota
calculation workaround where the real fix looks too involved to merge
immediately"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Correctly handle active 0-lag timers
sched/fair: Limit sched_cfs_period_timer() loop to avoid hard lockup
Linus Torvalds [Sat, 20 Apr 2019 16:38:01 +0000 (09:38 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"A lockdep warning fix and a script execution fix when atomics are
generated"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomics: Don't assume that scripts are executable
locking/lockdep: Make lockdep_unregister_key() honor 'debug_locks' again
Linus Torvalds [Sat, 20 Apr 2019 01:03:55 +0000 (18:03 -0700)]
Merge branch 'for-5.1-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"A patch to fix a RCU imbalance error in the devices cgroup
configuration error path"
* 'for-5.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
device_cgroup: fix RCU imbalance in error case
Linus Torvalds [Fri, 19 Apr 2019 22:37:22 +0000 (15:37 -0700)]
Merge branch 'for-5.1-fixes' of git://git./linux/kernel/git/dennis/percpu
Pull percpu fixlet from Dennis Zhou:
"This stops printing the base address of percpu memory on
initialization"
* 'for-5.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: stop printing kernel addresses
David S. Miller [Fri, 19 Apr 2019 22:14:37 +0000 (15:14 -0700)]
Merge tag 'mlx5-fixes-2019-04-19' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2019-04-19
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
For -stable v4.7:
('net/mlx5e: ethtool, Remove unsupported SFP EEPROM high pages query')
For -stable v4.19:
('net/mlx5e: Fix the max MTU check in case of XDP')
For -stable v5.0:
('net/mlx5e: Fix use-after-free after xdp_return_frame')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Fri, 19 Apr 2019 06:31:00 +0000 (14:31 +0800)]
team: fix possible recursive locking when add slaves
If we add a bond device which is already the master of the team interface,
we will hold the team->lock in team_add_slave() first and then request the
lock in team_set_mac_address() again. The functions are called like:
- team_add_slave()
- team_port_add()
- team_port_enter()
- team_modeop_port_enter()
- __set_port_dev_addr()
- dev_set_mac_address()
- bond_set_mac_address()
- dev_set_mac_address()
- team_set_mac_address
Although team_upper_dev_link() would check the upper devices but it is
called too late. Fix it by adding a checking before processing the slave.
v2: Do not split the string in netdev_err()
Fixes:
3d249d4ca7d0 ("net: introduce ethernet teaming device")
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Po-Hsu Lin [Thu, 18 Apr 2019 11:57:25 +0000 (19:57 +0800)]
selftests/net: correct the return value for run_netsocktests
The run_netsocktests will be marked as passed regardless the actual test
result from the ./socket:
selftests: net: run_netsocktests
========================================
--------------------
running socket test
--------------------
[FAIL]
ok 1..6 selftests: net: run_netsocktests [PASS]
This is because the test script itself has been successfully executed.
Fix this by exit 1 when the test failed.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Erez Alfasi [Thu, 11 Apr 2019 07:41:03 +0000 (10:41 +0300)]
net/mlx5e: ethtool, Remove unsupported SFP EEPROM high pages query
Querying EEPROM high pages data for SFP module is currently
not supported by our driver and yet queried, resulting in
invalid FW queries.
Set the EEPROM ethtool data length to 256 for SFP module will
limit the reading for page 0 only and prevent invalid FW queries.
Fixes:
bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM")
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Maxim Mikityanskiy [Mon, 8 Apr 2019 12:12:45 +0000 (15:12 +0300)]
net/mlx5e: Fix the max MTU check in case of XDP
MLX5E_XDP_MAX_MTU was calculated incorrectly. It didn't account for
NET_IP_ALIGN and MLX5E_HW2SW_MTU, and it also misused MLX5_SKB_FRAG_SZ.
This commit fixes the calculations and adds a brief explanation for the
formula used.
Fixes:
a26a5bdf3ee2d ("net/mlx5e: Restrict the combination of large MTU and XDP")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Maxim Mikityanskiy [Fri, 15 Mar 2019 14:41:43 +0000 (16:41 +0200)]
net/mlx5e: Fix use-after-free after xdp_return_frame
xdp_return_frame releases the frame. It leads to releasing the page, so
it's not allowed to access xdpi.xdpf->len after that, because xdpi.xdpf
is at xdp->data_hard_start after convert_to_xdp_frame. This patch moves
the memory access to precede the return of the frame.
Fixes:
58b99ee3e3ebe ("net/mlx5e: Add support for XDP_REDIRECT in device-out side")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Linus Torvalds [Fri, 19 Apr 2019 19:22:27 +0000 (12:22 -0700)]
Merge tag 'tty-5.1-rc6' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are five small fixes for some tty/serial/vt issues that have been
reported.
The vt one has been around for a while, it is good to finally get that
resolved. The others fix a build warning that showed up in 5.1-rc1,
and resolve a problem in the sh-sci driver.
Note, the second patch for build warning fix for the sc16is7xx driver
was just applied to the tree, as it resolves a problem with the
previous patch to try to solve the issue. It has not shown up in
linux-next yet, unlike all of the other patches, but it has passed
0-day testing and everyone seems to agree that it is correct"
* tag 'tty-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
sc16is7xx: put err_spi and err_i2c into correct #ifdef
vt: fix cursor when clearing the screen
sc16is7xx: move label 'err_spi' to correct section
serial: sh-sci: Fix HSCIF RX sampling point adjustment
serial: sh-sci: Fix HSCIF RX sampling point calculation
Petr Štetiar [Wed, 17 Apr 2019 20:09:12 +0000 (22:09 +0200)]
of_net: Fix residues after of_get_nvmem_mac_address removal
I've discovered following discrepancy in the bindings/net/ethernet.txt
documentation, where it states following:
- nvmem-cells: phandle, reference to an nvmem node for the MAC address;
- nvmem-cell-names: string, should be "mac-address" if nvmem is to be..
which is actually misleading and confusing. There are only two ethernet
drivers in the tree, cadence/macb and davinci which supports this
properties.
This nvmem-cell* properties were introduced in commit
9217e566bdee
("of_net: Implement of_get_nvmem_mac_address helper"), but
commit
afa64a72b862 ("of: net: kill of_get_nvmem_mac_address()")
forget to properly clean up this parts.
So this patch fixes the documentation by moving the nvmem-cell*
properties at the appropriate places. While at it, I've removed unused
include as well.
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Fixes:
afa64a72b862 ("of: net: kill of_get_nvmem_mac_address()")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 19 Apr 2019 18:46:51 +0000 (11:46 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"16 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping
mm/kmemleak.c: fix unused-function warning
init: initialize jump labels before command line option parsing
kernel/watchdog_hld.c: hard lockup message should end with a newline
kcov: improve CONFIG_ARCH_HAS_KCOV help text
mm: fix inactive list balancing between NUMA nodes and cgroups
mm/hotplug: treat CMA pages as unmovable
proc: fixup proc-pid-vm test
proc: fix map_files test on F29
mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n
mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock
mm: swapoff: shmem_unuse() stop eviction without igrab()
mm: swapoff: take notice of completion sooner
mm: swapoff: remove too limiting SWAP_UNUSE_MAX_TRIES
mm: swapoff: shmem_find_swap_entries() filter out other types
slab: store tagged freelist for off-slab slabmgmt
Linus Torvalds [Fri, 19 Apr 2019 18:10:42 +0000 (11:10 -0700)]
Merge tag 'staging-5.1-rc6' of git://git./linux/kernel/git/gregkh/staging
Pull staging and IIO fixes from Greg KH:
"Here is a bunch of IIO driver fixes, and some smaller staging driver
fixes, for 5.1-rc6. The IIO fixes were delayed due to my vacation, but
all resolve a number of reported issues and have been in linux-next
for a few weeks with no reported issues.
The other staging driver fixes are all tiny, resolving some reported
issues in the comedi and most drivers, as well as some erofs fixes.
All of these patches have been in linux-next with no reported issues"
* tag 'staging-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (24 commits)
staging: comedi: ni_usb6501: Fix possible double-free of ->usb_rx_buf
staging: comedi: ni_usb6501: Fix use of uninitialized mutex
staging: erofs: fix unexpected out-of-bound data access
staging: comedi: vmk80xx: Fix possible double-free of ->usb_rx_buf
staging: comedi: vmk80xx: Fix use of uninitialized semaphore
staging: most: core: use device description as name
iio: core: fix a possible circular locking dependency
iio: ad_sigma_delta: select channel when reading register
iio: pms7003: select IIO_TRIGGERED_BUFFER
iio: cros_ec: Fix the maths for gyro scale calculation
iio: adc: xilinx: prevent touching unclocked h/w on remove
iio: adc: xilinx: fix potential use-after-free on probe
iio: adc: xilinx: fix potential use-after-free on remove
iio: dac: mcp4725: add missing powerdown bits in store eeprom
io: accel: kxcjk1013: restore the range after resume.
iio:chemical:bme680: Fix SPI read interface
iio:chemical:bme680: Fix, report temperature in millidegrees
iio: chemical: fix missing Kconfig block for sgp30
iio: adc: at91: disable adc channel interrupt in timeout case
iio: gyro: mpu3050: fix chip ID reading
...
Linus Torvalds [Fri, 19 Apr 2019 18:08:43 +0000 (11:08 -0700)]
Merge tag 'char-misc-5.1-rc6' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are four small misc driver fixes for 5.1-rc6.
Nothing major at all, they fix up a Kconfig issues, a SPDX invalid
license tag, and two tiny bugfixes.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
drivers: power: supply: goldfish_battery: Fix bogus SPDX identifier
extcon: ptn5150: fix COMPILE_TEST dependencies
misc: fastrpc: add checked value for dma_set_mask
habanalabs: remove low credit limit of DMA #0
Ming Lei [Wed, 17 Apr 2019 01:11:26 +0000 (09:11 +0800)]
block: make sure that bvec length can't be overflow
bvec->bv_offset may be bigger than PAGE_SIZE sometimes, such as,
when one bio is splitted in the middle of one bvec via bio_split(),
and bi_iter.bi_bvec_done is used to build offset of the 1st bvec of
remained bio. And the remained bio's bvec may be re-submitted to fs
layer via ITER_IBVEC, such as loop and nvme-loop.
So we have to make sure that every bvec's offset is less than
PAGE_SIZE from bio_for_each_segment_all() because some drivers(loop,
nvme-loop) passes the splitted bvec to fs layer via ITER_BVEC.
This patch fixes this issue reported by Zhang Yi When running nvme/011.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yi Zhang <yi.zhang@redhat.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes:
6dc4f100c175 ("block: allow bio_for_each_segment_all() to iterate over multi-page bvec")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hou Tao [Fri, 19 Apr 2019 02:31:27 +0000 (10:31 +0800)]
block: kill all_q_node in request_queue
all_q_node has not been used since commit
4b855ad37194 ("blk-mq: Create
hctx for each present CPU"), so remove it.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 19 Apr 2019 17:28:27 +0000 (10:28 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- several new key mappings for HID
- a host of new ACPI IDs used to identify Elan touchpads in Lenovo
laptops
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: snvs_pwrkey - initialize necessary driver data before enabling IRQ
HID: input: add mapping for "Toggle Display" key
HID: input: add mapping for "Full Screen" key
HID: input: add mapping for keyboard Brightness Up/Down/Toggle keys
HID: input: add mapping for Expose/Overview key
HID: input: fix mapping of aspect ratio key
[media] doc-rst: switch to new names for Full Screen/Aspect keys
Input: document meanings of KEY_SCREEN and KEY_ZOOM
Input: elan_i2c - add hardware ID for multiple Lenovo laptops
Hans de Goede [Sun, 30 Dec 2018 17:27:15 +0000 (18:27 +0100)]
x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority
The "ENERGY_PERF_BIAS: Set to 'normal', was 'performance'" message triggers
on pretty much every Intel machine. The purpose of log messages with
a warning level is to notify the user of something which potentially is
a problem, or at least somewhat unexpected.
This message clearly does not match those criteria, so lower its log
priority from warning to info.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181230172715.17469-1-hdegoede@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 19 Apr 2019 17:10:47 +0000 (19:10 +0200)]
Merge tag 'perf-urgent-for-mingo-5.1-
20190419' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
perf top:
Jiri Olsa:
- Fix 'perf top --pid', it needs PERF_SAMPLE_TIME since we switched to using
a different thread to sort the events and then even for just a single
thread we now need timestamps.
BPF:
Jiri Olsa:
- Fix bpf_prog and btf lookup functions failure path to to properly return
NULL.
- Fix side band thread draining, used to process PERF_RECORD_BPF_EVENT
metadata records.
core:
Jiri Olsa:
- Fix map lookup by name to get a refcount when the name is already in
the tree. Found
Song Liu:
- Fix __map__is_kmodule() by taking into account recently added BPF
maps.
UAPI:
Arnaldo Carvalho de Melo:
- Sync sound/asound.h copy
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andrea Arcangeli [Fri, 19 Apr 2019 00:50:52 +0000 (17:50 -0700)]
coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping
The core dumping code has always run without holding the mmap_sem for
writing, despite that is the only way to ensure that the entire vma
layout will not change from under it. Only using some signal
serialization on the processes belonging to the mm is not nearly enough.
This was pointed out earlier. For example in Hugh's post from Jul 2017:
https://lkml.kernel.org/r/alpine.LSU.2.11.
1707191716030.2055@eggly.anvils
"Not strictly relevant here, but a related note: I was very surprised
to discover, only quite recently, how handle_mm_fault() may be called
without down_read(mmap_sem) - when core dumping. That seems a
misguided optimization to me, which would also be nice to correct"
In particular because the growsdown and growsup can move the
vm_start/vm_end the various loops the core dump does around the vma will
not be consistent if page faults can happen concurrently.
Pretty much all users calling mmget_not_zero()/get_task_mm() and then
taking the mmap_sem had the potential to introduce unexpected side
effects in the core dumping code.
Adding mmap_sem for writing around the ->core_dump invocation is a
viable long term fix, but it requires removing all copy user and page
faults and to replace them with get_dump_page() for all binary formats
which is not suitable as a short term fix.
For the time being this solution manually covers the places that can
confuse the core dump either by altering the vma layout or the vma flags
while it runs. Once ->core_dump runs under mmap_sem for writing the
function mmget_still_valid() can be dropped.
Allowing mmap_sem protected sections to run in parallel with the
coredump provides some minor parallelism advantage to the swapoff code
(which seems to be safe enough by never mangling any vma field and can
keep doing swapins in parallel to the core dumping) and to some other
corner case.
In order to facilitate the backporting I added "Fixes:
86039bd3b4e6"
however the side effect of this same race condition in /proc/pid/mem
should be reproducible since before 2.6.12-rc2 so I couldn't add any
other "Fixes:" because there's no hash beyond the git genesis commit.
Because find_extend_vma() is the only location outside of the process
context that could modify the "mm" structures under mmap_sem for
reading, by adding the mmget_still_valid() check to it, all other cases
that take the mmap_sem for reading don't need the new check after
mmget_not_zero()/get_task_mm(). The expand_stack() in page fault
context also doesn't need the new check, because all tasks under core
dumping are frozen.
Link: http://lkml.kernel.org/r/20190325224949.11068-1-aarcange@redhat.com
Fixes:
86039bd3b4e6 ("userfaultfd: add new syscall to provide memory externalization")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Fri, 19 Apr 2019 00:50:48 +0000 (17:50 -0700)]
mm/kmemleak.c: fix unused-function warning
The only references outside of the #ifdef have been removed, so now we
get a warning in non-SMP configurations:
mm/kmemleak.c:1404:13: error: unused function 'scan_large_block' [-Werror,-Wunused-function]
Add a new #ifdef around it.
Link: http://lkml.kernel.org/r/20190416123148.3502045-1-arnd@arndb.de
Fixes:
298a32b13208 ("kmemleak: powerpc: skip scanning holes in the .bss section")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Williams [Fri, 19 Apr 2019 00:50:44 +0000 (17:50 -0700)]
init: initialize jump labels before command line option parsing
When a module option, or core kernel argument, toggles a static-key it
requires jump labels to be initialized early. While x86, PowerPC, and
ARM64 arrange for jump_label_init() to be called before parse_args(),
ARM does not.
Kernel command line: rdinit=/sbin/init page_alloc.shuffle=1 panic=-1 console=ttyAMA0,115200 page_alloc.shuffle=1
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at ./include/linux/jump_label.h:303
page_alloc_shuffle+0x12c/0x1ac
static_key_enable(): static key 'page_alloc_shuffle_key+0x0/0x4' used
before call to jump_label_init()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted
5.1.0-rc4-next-20190410-00003-g3367c36ce744 #1
Hardware name: ARM Integrator/CP (Device Tree)
[<
c0011c68>] (unwind_backtrace) from [<
c000ec48>] (show_stack+0x10/0x18)
[<
c000ec48>] (show_stack) from [<
c07e9710>] (dump_stack+0x18/0x24)
[<
c07e9710>] (dump_stack) from [<
c001bb1c>] (__warn+0xe0/0x108)
[<
c001bb1c>] (__warn) from [<
c001bb88>] (warn_slowpath_fmt+0x44/0x6c)
[<
c001bb88>] (warn_slowpath_fmt) from [<
c0b0c4a8>]
(page_alloc_shuffle+0x12c/0x1ac)
[<
c0b0c4a8>] (page_alloc_shuffle) from [<
c0b0c550>] (shuffle_store+0x28/0x48)
[<
c0b0c550>] (shuffle_store) from [<
c003e6a0>] (parse_args+0x1f4/0x350)
[<
c003e6a0>] (parse_args) from [<
c0ac3c00>] (start_kernel+0x1c0/0x488)
Move the fallback call to jump_label_init() to occur before
parse_args().
The redundant calls to jump_label_init() in other archs are left intact
in case they have static key toggling use cases that are even earlier
than option parsing.
Link: http://lkml.kernel.org/r/155544804466.1032396.13418949511615676665.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Guenter Roeck <groeck@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Russell King <rmk@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sergey Senozhatsky [Fri, 19 Apr 2019 00:50:41 +0000 (17:50 -0700)]
kernel/watchdog_hld.c: hard lockup message should end with a newline
Separate print_modules() and hard lockup error message.
Before the patch:
NMI watchdog: Watchdog detected hard LOCKUP on cpu 1Modules linked in: nls_cp437
Link: http://lkml.kernel.org/r/20190412062557.2700-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Rutland [Fri, 19 Apr 2019 00:50:37 +0000 (17:50 -0700)]
kcov: improve CONFIG_ARCH_HAS_KCOV help text
The help text for CONFIG_ARCH_HAS_KCOV is stale, and describes the
feature as being enabled only for x86_64, when it is now enabled for
several architectures, including arm, arm64, powerpc, and s390.
Let's remove that stale help text, and update it along the lines of hat
for ARCH_HAS_FORTIFY_SOURCE, better describing when an architecture
should select CONFIG_ARCH_HAS_KCOV.
Link: http://lkml.kernel.org/r/20190412102733.5154-1-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Fri, 19 Apr 2019 00:50:34 +0000 (17:50 -0700)]
mm: fix inactive list balancing between NUMA nodes and cgroups
During !CONFIG_CGROUP reclaim, we expand the inactive list size if it's
thrashing on the node that is about to be reclaimed. But when cgroups
are enabled, we suddenly ignore the node scope and use the cgroup scope
only. The result is that pressure bleeds between NUMA nodes depending
on whether cgroups are merely compiled into Linux. This behavioral
difference is unexpected and undesirable.
When the refault adaptivity of the inactive list was first introduced,
there were no statistics at the lruvec level - the intersection of node
and memcg - so it was better than nothing.
But now that we have that infrastructure, use lruvec_page_state() to
make the list balancing decision always NUMA aware.
[hannes@cmpxchg.org: fix bisection hole]
Link: http://lkml.kernel.org/r/20190417155241.GB23013@cmpxchg.org
Link: http://lkml.kernel.org/r/20190412144438.2645-1-hannes@cmpxchg.org
Fixes:
2a2e48854d70 ("mm: vmscan: fix IO/refault regression in cache workingset transition")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Fri, 19 Apr 2019 00:50:30 +0000 (17:50 -0700)]
mm/hotplug: treat CMA pages as unmovable
has_unmovable_pages() is used by allocating CMA and gigantic pages as
well as the memory hotplug. The later doesn't know how to offline CMA
pool properly now, but if an unused (free) CMA page is encountered, then
has_unmovable_pages() happily considers it as a free memory and
propagates this up the call chain. Memory offlining code then frees the
page without a proper CMA tear down which leads to an accounting issues.
Moreover if the same memory range is onlined again then the memory never
gets back to the CMA pool.
State after memory offline:
# grep cma /proc/vmstat
nr_free_cma 205824
# cat /sys/kernel/debug/cma/cma-kvm_cma/count
209920
Also, kmemleak still think those memory address are reserved below but
have already been used by the buddy allocator after onlining. This
patch fixes the situation by treating CMA pageblocks as unmovable except
when has_unmovable_pages() is called as part of CMA allocation.
Offlined Pages 4096
kmemleak: Cannot insert 0xc000201f7d040008 into the object search tree (overlaps existing)
Call Trace:
dump_stack+0xb0/0xf4 (unreliable)
create_object+0x344/0x380
__kmalloc_node+0x3ec/0x860
kvmalloc_node+0x58/0x110
seq_read+0x41c/0x620
__vfs_read+0x3c/0x70
vfs_read+0xbc/0x1a0
ksys_read+0x7c/0x140
system_call+0x5c/0x70
kmemleak: Kernel memory leak detector disabled
kmemleak: Object 0xc000201cc8000000 (size
13757317120):
kmemleak: comm "swapper/0", pid 0, jiffies
4294937297
kmemleak: min_count = -1
kmemleak: count = 0
kmemleak: flags = 0x5
kmemleak: checksum = 0
kmemleak: backtrace:
cma_declare_contiguous+0x2a4/0x3b0
kvm_cma_reserve+0x11c/0x134
setup_arch+0x300/0x3f8
start_kernel+0x9c/0x6e8
start_here_common+0x1c/0x4b0
kmemleak: Automatic memory scanning thread ended
[cai@lca.pw: use is_migrate_cma_page() and update commit log]
Link: http://lkml.kernel.org/r/20190416170510.20048-1-cai@lca.pw
Link: http://lkml.kernel.org/r/20190413002623.8967-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Fri, 19 Apr 2019 00:50:27 +0000 (17:50 -0700)]
proc: fixup proc-pid-vm test
Silly sizeof(pointer) vs sizeof(uint8_t[]) bug.
Link: http://lkml.kernel.org/r/20190414123009.GA12971@avx2
Fixes:
e483b0208784 ("proc: test /proc/*/maps, smaps, smaps_rollup, statm")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Fri, 19 Apr 2019 00:50:23 +0000 (17:50 -0700)]
proc: fix map_files test on F29
F29 bans mapping first 64KB even for root making test fail. Iterate
from address 0 until mmap() works.
Gentoo (root):
openat(AT_FDCWD, "/dev/zero", O_RDONLY) = 3
mmap(NULL, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0
Gentoo (non-root):
openat(AT_FDCWD, "/dev/zero", O_RDONLY) = 3
mmap(NULL, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EPERM (Operation not permitted)
mmap(0x1000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0x1000
F29 (root):
openat(AT_FDCWD, "/dev/zero", O_RDONLY) = 3
mmap(NULL, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x1000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x2000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x3000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x4000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x5000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x6000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x7000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x8000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x9000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0xa000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0xb000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0xc000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0xd000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0xe000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0xf000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = -1 EACCES (Permission denied)
mmap(0x10000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0x10000
Now all proc tests succeed on F29 if run as root, at last!
Link: http://lkml.kernel.org/r/20190414123612.GB12971@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Konstantin Khlebnikov [Fri, 19 Apr 2019 00:50:20 +0000 (17:50 -0700)]
mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n
Commit
58bc4c34d249 ("mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly")
depends on skipping vmstat entries with empty name introduced in
7aaf77272358 ("mm: don't show nr_indirectly_reclaimable in
/proc/vmstat") but reverted in
b29940c1abd7 ("mm: rename and change
semantics of nr_indirectly_reclaimable_bytes").
So skipping no longer works and /proc/vmstat has misformatted lines " 0".
This patch simply shows debug counters "nr_tlb_remote_*" for UP.
Link: http://lkml.kernel.org/r/155481488468.467.4295519102880913454.stgit@buzz
Fixes:
58bc4c34d249 ("mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Roman Gushchin <guro@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zhong jiang [Fri, 19 Apr 2019 00:50:16 +0000 (17:50 -0700)]
mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock
When adding memory by probing a memory block in the sysfs interface,
there is an obvious issue where we will unlock the device_hotplug_lock
when we failed to takes it.
That issue was introduced in
8df1d0e4a265 ("mm/memory_hotplug: make
add_memory() take the device_hotplug_lock").
We should drop out in time when failing to take the device_hotplug_lock.
Link: http://lkml.kernel.org/r/1554696437-9593-1-git-send-email-zhongjiang@huawei.com
Fixes:
8df1d0e4a265 ("mm/memory_hotplug: make add_memory() take the device_hotplug_lock")
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reported-by: Yang yingliang <yangyingliang@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 19 Apr 2019 00:50:13 +0000 (17:50 -0700)]
mm: swapoff: shmem_unuse() stop eviction without igrab()
The igrab() in shmem_unuse() looks good, but we forgot that it gives no
protection against concurrent unmounting: a point made by Konstantin
Khlebnikov eight years ago, and then fixed in 2.6.39 by
778dd893ae78
("tmpfs: fix race between umount and swapoff"). The current 5.1-rc
swapoff is liable to hit "VFS: Busy inodes after unmount of tmpfs.
Self-destruct in 5 seconds. Have a nice day..." followed by GPF.
Once again, give up on using igrab(); but don't go back to making such
heavy-handed use of shmem_swaplist_mutex as last time: that would spoil
the new design, and I expect could deadlock inside shmem_swapin_page().
Instead, shmem_unuse() just raise a "stop_eviction" count in the shmem-
specific inode, and shmem_evict_inode() wait for that to go down to 0.
Call it "stop_eviction" rather than "swapoff_busy" because it can be put
to use for others later (huge tmpfs patches expect to use it).
That simplifies shmem_unuse(), protecting it from both unlink and
unmount; and in practice lets it locate all the swap in its first try.
But do not rely on that: there's still a theoretical case, when
shmem_writepage() might have been preempted after its get_swap_page(),
before making the swap entry visible to swapoff.
[hughd@google.com: remove incorrect list_del()]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904091133570.1898@eggly.anvils
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904081259400.1523@eggly.anvils
Fixes:
b56a2d8af914 ("mm: rid swapoff of quadratic complexity")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Alex Xu (Hello71)" <alex_y_xu@yahoo.ca>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Kelley Nielsen <kelleynnn@gmail.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vineeth Pillai <vpillai@digitalocean.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 19 Apr 2019 00:50:09 +0000 (17:50 -0700)]
mm: swapoff: take notice of completion sooner
The old try_to_unuse() implementation was driven by find_next_to_unuse(),
which terminated as soon as all the swap had been freed.
Add inuse_pages checks now (alongside signal_pending()) to stop scanning
mms and swap_map once finished.
The same ought to be done in shmem_unuse() too, but never was before,
and needs a different interface: so leave it as is for now.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904081258200.1523@eggly.anvils
Fixes:
b56a2d8af914 ("mm: rid swapoff of quadratic complexity")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Alex Xu (Hello71)" <alex_y_xu@yahoo.ca>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Kelley Nielsen <kelleynnn@gmail.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vineeth Pillai <vpillai@digitalocean.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 19 Apr 2019 00:50:02 +0000 (17:50 -0700)]
mm: swapoff: remove too limiting SWAP_UNUSE_MAX_TRIES
SWAP_UNUSE_MAX_TRIES 3 appeared to work well in earlier testing, but
further testing has proved it to be a source of unnecessary swapoff
EBUSY failures (which can then be followed by unmount EBUSY failures).
When mmget_not_zero() or shmem's igrab() fails, there is an mm exiting
or inode being evicted, freeing up swap independent of try_to_unuse().
Those typically completed much sooner than the old quadratic swapoff,
but now it's more common that swapoff may need to wait for them.
It's possible to move those cases from init_mm.mmlist and shmem_swaplist
to separate "exiting" swaplists, and try_to_unuse() then wait for those
lists to be emptied; but we've not bothered with that in the past, and
don't want to risk missing some other forgotten case. So just revert to
cycling around until the swap is gone, without any retries limit.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904081256170.1523@eggly.anvils
Fixes:
b56a2d8af914 ("mm: rid swapoff of quadratic complexity")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Alex Xu (Hello71)" <alex_y_xu@yahoo.ca>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Kelley Nielsen <kelleynnn@gmail.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vineeth Pillai <vpillai@digitalocean.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 19 Apr 2019 00:49:58 +0000 (17:49 -0700)]
mm: swapoff: shmem_find_swap_entries() filter out other types
Swapfile "type" was passed all the way down to shmem_unuse_inode(), but
then forgotten from shmem_find_swap_entries(): with the result that
removing one swapfile would try to free up all the swap from shmem - no
problem when only one swapfile anyway, but counter-productive when more,
causing swapoff to be unnecessarily OOM-killed when it should succeed.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904081254470.1523@eggly.anvils
Fixes:
b56a2d8af914 ("mm: rid swapoff of quadratic complexity")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: "Alex Xu (Hello71)" <alex_y_xu@yahoo.ca>
Cc: Vineeth Pillai <vpillai@digitalocean.com>
Cc: Kelley Nielsen <kelleynnn@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Fri, 19 Apr 2019 00:49:55 +0000 (17:49 -0700)]
slab: store tagged freelist for off-slab slabmgmt
Commit
51dedad06b5f ("kasan, slab: make freelist stored without tags")
calls kasan_reset_tag() for off-slab slab management object leading to
freelist being stored non-tagged.
However, cache_grow_begin() calls alloc_slabmgmt() which calls
kmem_cache_alloc_node() assigns a tag for the address and stores it in
the shadow address. As the result, it causes endless errors below
during boot due to drain_freelist() -> slab_destroy() ->
kasan_slab_free() which compares already untagged freelist against the
stored tag in the shadow address.
Since off-slab slab management object freelist is such a special case,
just store it tagged. Non-off-slab management object freelist is still
stored untagged which has not been assigned a tag and should not cause
any other troubles with this inconsistency.
BUG: KASAN: double-free or invalid-free in slab_destroy+0x84/0x88
Pointer tag: [ff], memory tag: [99]
CPU: 0 PID: 1376 Comm: kworker/0:4 Tainted: G W 5.1.0-rc3+ #8
Hardware name: HPE Apollo 70 /C01_APACHE_MB , BIOS L50_5.13_1.0.6 07/10/2018
Workqueue: cgroup_destroy css_killed_work_fn
Call trace:
print_address_description+0x74/0x2a4
kasan_report_invalid_free+0x80/0xc0
__kasan_slab_free+0x204/0x208
kasan_slab_free+0xc/0x18
kmem_cache_free+0xe4/0x254
slab_destroy+0x84/0x88
drain_freelist+0xd0/0x104
__kmem_cache_shrink+0x1ac/0x224
__kmemcg_cache_deactivate+0x1c/0x28
memcg_deactivate_kmem_caches+0xa0/0xe8
memcg_offline_kmem+0x8c/0x3d4
mem_cgroup_css_offline+0x24c/0x290
css_killed_work_fn+0x154/0x618
process_one_work+0x9cc/0x183c
worker_thread+0x9b0/0xe38
kthread+0x374/0x390
ret_from_fork+0x10/0x18
Allocated by task 1625:
__kasan_kmalloc+0x168/0x240
kasan_slab_alloc+0x18/0x20
kmem_cache_alloc_node+0x1f8/0x3a0
cache_grow_begin+0x4fc/0xa24
cache_alloc_refill+0x2f8/0x3e8
kmem_cache_alloc+0x1bc/0x3bc
sock_alloc_inode+0x58/0x334
alloc_inode+0xb8/0x164
new_inode_pseudo+0x20/0xec
sock_alloc+0x74/0x284
__sock_create+0xb0/0x58c
sock_create+0x98/0xb8
__sys_socket+0x60/0x138
__arm64_sys_socket+0xa4/0x110
el0_svc_handler+0x2c0/0x47c
el0_svc+0x8/0xc
Freed by task 1625:
__kasan_slab_free+0x114/0x208
kasan_slab_free+0xc/0x18
kfree+0x1a8/0x1e0
single_release+0x7c/0x9c
close_pdeo+0x13c/0x43c
proc_reg_release+0xec/0x108
__fput+0x2f8/0x784
____fput+0x1c/0x28
task_work_run+0xc0/0x1b0
do_notify_resume+0xb44/0x1278
work_pending+0x8/0x10
The buggy address belongs to the object at
ffff809681b89e00
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 0 bytes inside of
128-byte region [
ffff809681b89e00,
ffff809681b89e80)
The buggy address belongs to the page:
page:
ffff7fe025a06e00 count:1 mapcount:0 mapping:
01ff80082000fb00
index:0xffff809681b8fe04
flags: 0x17ffffffc000200(slab)
raw:
017ffffffc000200 ffff7fe025a06d08 ffff7fe022ef7b88 01ff80082000fb00
raw:
ffff809681b8fe04 ffff809681b80000 00000001000000e0 0000000000000000
page dumped because: kasan: bad access detected
page allocated via order 0, migratetype Unmovable, gfp_mask
0x2420c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_COMP|__GFP_THISNODE)
prep_new_page+0x4e0/0x5e0
get_page_from_freelist+0x4ce8/0x50d4
__alloc_pages_nodemask+0x738/0x38b8
cache_grow_begin+0xd8/0xa24
____cache_alloc_node+0x14c/0x268
__kmalloc+0x1c8/0x3fc
ftrace_free_mem+0x408/0x1284
ftrace_free_init_mem+0x20/0x28
kernel_init+0x24/0x548
ret_from_fork+0x10/0x18
Memory state around the buggy address:
ffff809681b89c00: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
ffff809681b89d00: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
>
ffff809681b89e00: 99 99 99 99 99 99 99 99 fe fe fe fe fe fe fe fe
^
ffff809681b89f00: 43 43 43 43 43 fe fe fe fe fe fe fe fe fe fe fe
ffff809681b8a000: 6d fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
Link: http://lkml.kernel.org/r/20190403022858.97584-1-cai@lca.pw
Fixes:
51dedad06b5f ("kasan, slab: make freelist stored without tags")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Sat, 30 Mar 2019 00:47:43 +0000 (17:47 -0700)]
x86/cpu/bugs: Use __initconst for 'const' init data
Some of the recently added const tables use __initdata which causes section
attribute conflicts.
Use __initconst instead.
Fixes:
fa1202ef2243 ("x86/speculation: Add command line control")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190330004743.29541-9-andi@firstfloor.org
Masami Hiramatsu [Sat, 23 Feb 2019 16:50:49 +0000 (01:50 +0900)]
x86/kprobes: Avoid kretprobe recursion bug
Avoid kretprobe recursion loop bg by setting a dummy
kprobes to current_kprobe per-CPU variable.
This bug has been introduced with the asm-coded trampoline
code, since previously it used another kprobe for hooking
the function return placeholder (which only has a nop) and
trampoline handler was called from that kprobe.
This revives the old lost kprobe again.
With this fix, we don't see deadlock anymore.
And you can see that all inner-called kretprobe are skipped.
event_1 235 0
event_2 19375 19612
The 1st column is recorded count and the 2nd is missed count.
Above shows (event_1 rec) + (event_2 rec) ~= (event_2 missed)
(some difference are here because the counter is racy)
Reported-by: Andrea Righi <righi.andrea@gmail.com>
Tested-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes:
c9becf58d935 ("[PATCH] kretprobe: kretprobe-booster")
Link: http://lkml.kernel.org/r/155094064889.6137.972160690963039.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Masami Hiramatsu [Sat, 23 Feb 2019 16:50:20 +0000 (01:50 +0900)]
kprobes: Mark ftrace mcount handler functions nokprobe
Mark ftrace mcount handler functions nokprobe since
probing on these functions with kretprobe pushes
return address incorrectly on kretprobe shadow stack.
Reported-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Tested-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/155094062044.6137.6419622920568680640.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Masami Hiramatsu [Sat, 23 Feb 2019 16:49:52 +0000 (01:49 +0900)]
x86/kprobes: Verify stack frame on kretprobe
Verify the stack frame pointer on kretprobe trampoline handler,
If the stack frame pointer does not match, it skips the wrong
entry and tries to find correct one.
This can happen if user puts the kretprobe on the function
which can be used in the path of ftrace user-function call.
Such functions should not be probed, so this adds a warning
message that reports which function should be blacklisted.
Tested-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/155094059185.6137.15527904013362842072.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andrew Morton [Wed, 13 Feb 2019 19:59:48 +0000 (11:59 -0800)]
locking/atomics: Don't assume that scripts are executable
patch(1) doesn't set the x bit on files. So if someone downloads and
applies patch-4.21.xz, their kernel won't build. Fix that by executing
/bin/sh.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>