OSDN Git Service
Peter Crosthwaite [Fri, 4 Mar 2016 11:30:19 +0000 (11:30 +0000)]
arm: cpu: handle BE32 user-mode as BE
endian with address manipulations on subword accesses (to give the
illusion of BE). But user-mode cannot tell the difference and is
already implemented as straight BE. So handle the difference in the
endianess query, where USER mode is BE and system is not.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Crosthwaite [Fri, 4 Mar 2016 11:30:19 +0000 (11:30 +0000)]
target-arm: cpu: Move cpu_is_big_endian to header
There is a CPU data endianness test that is used to drive the
virtio_big_endian test.
Move this up to the header so it can be more generally used for endian
tests. The KVM specific cpu_syncronize_state call is left behind in the
virtio specific function.
Rename it arm_cpu-data_is_big_endian() to more accurately capture that
this is for data accesses only.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Fri, 4 Mar 2016 11:30:19 +0000 (11:30 +0000)]
target-arm: implement SCTLR.B, drop bswap_code
bswap_code is a CPU property of sorts ("is the iside endianness the
opposite way round to TARGET_WORDS_BIGENDIAN?") but it is not the
actual CPU state involved here which is SCTLR.B (set for BE32
binaries, clear for BE8).
Replace bswap_code with SCTLR.B, and pass that to arm_ld*_code.
The next patches will make data fetches honor both SCTLR.B and
CPSR.E appropriately.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[PC changes:
* rebased on master (Jan 2016)
* s/TARGET_USER_ONLY/CONFIG_USER_ONLY
* Use bswap_code() for disas_set_info() instead of raw sctlr_b
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Fri, 4 Mar 2016 11:30:18 +0000 (11:30 +0000)]
linux-user: arm: pass env to get_user_code_*
This matches the idiom used by get_user_data_* later in the series,
and will help when bswap_code will be replaced by SCTLR.B.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Fri, 4 Mar 2016 11:30:18 +0000 (11:30 +0000)]
linux-user: arm: fix coding style for some linux-user signal functions
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Baumann [Fri, 4 Mar 2016 11:30:18 +0000 (11:30 +0000)]
bcm2835_mbox/property: replace ldl_phys/stl_phys with endian-specific accesses
PMM pointed out that ldl_phys and stl_phys are dependent on the CPU's
endianness, whereas device model code should be independent of
it. This changes the relevant Raspberry Pi devices to explicitly call
the little-endian variants.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id:
1456880233-22568-1-git-send-email-Andrew.Baumann@microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 4 Mar 2016 11:30:18 +0000 (11:30 +0000)]
hw/arm/virt: Assume EL3 boot rom will handle PSCI if one is provided
If the user passes us an EL3 boot rom, then it is going to want to
implement the PSCI interface itself. In this case, disable QEMU's
internal PSCI implementation so it does not get in the way, and
instead start all CPUs in an SMP configuration at once (the boot
rom will catch them all and pen up the secondaries until needed).
The boot rom code is also responsible for editing the device tree
to include any necessary information about its own PSCI implementation
before eventually passing it to a NonSecure guest.
(This "start all CPUs at once" approach is what both ARM Trusted
Firmware and UEFI expect, since it is what the ARM Foundation Model
does; the other approach would be to provide some emulated hardware
for "start the secondaries" but this is simplest.)
This is a compatibility break, but I don't believe that anybody
was using a secure boot ROM with an SMP configuration. Such a setup
would be somewhat broken since there was nothing preventing nonsecure
guest code from calling the QEMU PSCI function to start up a secondary
core in a way that completely bypassed the secure world.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id:
1456853976-7592-1-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 4 Mar 2016 11:30:18 +0000 (11:30 +0000)]
hw/arm/virt: Make first flash device Secure-only if booting secure
If the virt board is started with the 'secure' property set to
request a Secure setup, then make the first flash device be
visible only to the Secure world.
This is a breaking change, but I don't expect it to be noticed
by anybody, because running TZ-aware guests isn't common and
those guests are generally going to be booting from the flash
and implicitly expecting their Non-secure guests to not touch it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1455288361-30117-5-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 4 Mar 2016 11:30:17 +0000 (11:30 +0000)]
hw/arm/virt: Load bios image to MemoryRegion, not physaddr
If we're loading a BIOS image into the first flash device,
load it into the flash's memory region specifically, not
into the physical address where the flash resides. This will
make a difference when the flash might be in the Secure
address space rather than the Nonsecure one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1455288361-30117-4-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 4 Mar 2016 11:30:17 +0000 (11:30 +0000)]
loader: Add load_image_mr() to load ROM image to a MemoryRegion
Add a new function load_image_mr(), which behaves like
load_image_targphys() except that it loads the ROM image to
a specified MemoryRegion rather than to a specified physical
address. This is useful when a ROM blob needs to be loaded
to a particular flash or ROM device but the address of that
device in the machine's address space is not known. (For
instance, ROMs in devices, or ROMs which might exist in
a different address space to the system address space.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1455288361-30117-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Peter Maydell [Fri, 4 Mar 2016 11:30:17 +0000 (11:30 +0000)]
hw/arm/virt: Provide a secure-only RAM if booting in Secure mode
If we're booting in Secure mode, provide a secure-only RAM
(just 16MB) so that secure firmware has somewhere to run
from that won't be accessible to the Non-secure guest.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1455288361-30117-2-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 4 Mar 2016 11:30:17 +0000 (11:30 +0000)]
sdhci: Implement DeviceClass reset
The sdhci device was missing a DeviceClass reset method;
implement it. Poweron reset looks the same as reset commanded
by the guest via the device registers, apart from modelling of
the rpi 'pending insert interrupt on powerup' quirk.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id:
1456493044-10025-3-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 4 Mar 2016 11:30:17 +0000 (11:30 +0000)]
sd.c: Handle NULL block backend in sd_get_inserted()
The sd.c SD card emulation code can be in a state where the
SDState BlockBackend pointer is NULL; this is treated as
"card not present". Add a missing check to sd_get_inserted()
so that we don't segfault in this situation.
(This could be provoked by the guest writing to the SDHCI
register to do a reset on a xilinx-zynq-a9 board; it will
also happen at startup when sdhci implements its DeviceClass
reset method.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id:
1456493044-10025-2-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 4 Mar 2016 11:30:16 +0000 (11:30 +0000)]
virt: Lift the maximum RAM limit from 30GB to 255GB
The virt board restricts guests to only 30GB of RAM. This is a
hangover from the vexpress-a15 board, and there's no inherent reason
for it. 30GB is smaller than you might reasonably want to provision
a VM for on a beefy server machine. Raise the limit to 255GB.
We choose 255GB because the available space we currently have
below the 1TB boundary is up to the 512GB mark, but we don't
want to paint ourselves into a corner by assigning it all to
RAM. So we make half of it available for RAM, with the 256GB..512GB
range available for future non-RAM expansion purposes.
If we need to provide more RAM to VMs in the future then we need to:
* allocate a second bank of RAM starting at 2TB and working up
* fix the DT and ACPI table generation code in QEMU to correctly
report two split lumps of RAM to the guest
* fix KVM in the host kernel to allow guests with >40 bit address spaces
The last of these is obviously the trickiest, but it seems
reasonable to assume that anybody configuring a VM with a quarter
of a terabyte of RAM will be doing it on a host with more than a
terabyte of physical address space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Tested-by: Wei Huang <wei@redhat.com>
Message-id:
1456402182-11651-1-git-send-email-peter.maydell@linaro.org
Peter Maydell [Fri, 4 Mar 2016 11:30:16 +0000 (11:30 +0000)]
target-arm: Correct handling of writes to CPSR mode bits from gdb in usermode
In helper.c the expression
(env->uncached_cpsr & CPSR_M) != CPSR_USER
is always true; the right hand side was supposed to be ARM_CPU_MODE_USR
(an error in commit
cb01d391).
Since the incorrect expression was always true, this just meant that
commit
cb01d391 had no effect.
However simply changing the RHS here would reveal a logic error: if
the mode is USR we wish to completely ignore the attempt to set the
mode bits, which means that we must clear the CPSR_M bits from mask
to avoid the uncached_cpsr bits being updated at the end of the
function.
Move the condition into the correct place in the code, fix its RHS
constant, and add a comment about the fact that we must be doing a
gdbstub write if we're in user mode.
Fixes: https://bugs.launchpad.net/qemu/+bug/
1550503
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id:
1456764438-30015-1-git-send-email-peter.maydell@linaro.org
Peter Maydell [Thu, 3 Mar 2016 13:13:35 +0000 (13:13 +0000)]
Merge remote-tracking branch 'remotes/amit-virtio-rng/tags/rng-for-2.6-1' into staging
rng:
- implement a request queue for rng-random so multiple guest requests
don't result in vq buffers getting forgotten
- remove unused request cancellation code
- a VM with multiple vq buffers, when migrated, could get in a situation
where not all buffers are handed back to the guest. This is now
fixed.
# gpg: Signature made Thu 03 Mar 2016 12:18:54 GMT using RSA key ID
854083B6
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit-virtio-rng/tags/rng-for-2.6-1:
virtio-rng: ask for more data if queue is not fully drained
rng: add request queue support to rng-random
rng: move request queue cleanup from RngEgd to RngBackend
rng: move request queue from RngEgd to RngBackend
rng: remove the unused request cancellation code
MAINTAINERS: Add an entry for the include/sysemu/rng*.h files
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ladi Prosek [Thu, 3 Mar 2016 09:48:34 +0000 (10:48 +0100)]
virtio-rng: ask for more data if queue is not fully drained
This commit effectively reverts:
commit
4621c1768ef5d12171cca2aa1473595ecb9f1c9e
Author: Amit Shah <amit.shah@redhat.com>
Date: Wed Nov 21 11:21:19 2012 +0530
virtio-rng: remove extra request for entropy
but instead of calling virtio_rng_process unconditionally, it
first checks to see if the queue is empty as a little bit of
optimization.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <
1456998514-19271-1-git-send-email-lprosek@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Ladi Prosek [Thu, 3 Mar 2016 08:37:18 +0000 (09:37 +0100)]
rng: add request queue support to rng-random
Requests are now created in the RngBackend parent class and the
code path is shared by both rng-egd and rng-random.
This commit fixes the rng-random implementation which processed
only one request at a time and simply discarded all but the most
recent one. In the guest this manifested as delayed completion
of reads from virtio-rng, i.e. a read was completed only after
another read was issued.
By switching rng-random to use the same request queue as rng-egd,
the unsafe stack-based allocation of the entropy buffer is
eliminated and replaced with g_malloc.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <
1456994238-9585-5-git-send-email-lprosek@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Ladi Prosek [Thu, 3 Mar 2016 08:37:17 +0000 (09:37 +0100)]
rng: move request queue cleanup from RngEgd to RngBackend
RngBackend is now in charge of cleaning up the linked list on
instance finalization. It also exposes a function to finalize
individual RngRequest instances, called by its child classes.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <
1456994238-9585-4-git-send-email-lprosek@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Ladi Prosek [Thu, 3 Mar 2016 08:37:16 +0000 (09:37 +0100)]
rng: move request queue from RngEgd to RngBackend
The 'requests' field now lives in the RngBackend parent class.
There are no functional changes in this commit.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <
1456994238-9585-3-git-send-email-lprosek@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Ladi Prosek [Thu, 3 Mar 2016 08:37:15 +0000 (09:37 +0100)]
rng: remove the unused request cancellation code
rng_backend_cancel_requests had no callers and none of the code
deleted in this commit ever ran.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <
1456994238-9585-2-git-send-email-lprosek@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Thomas Huth [Thu, 25 Feb 2016 12:44:20 +0000 (13:44 +0100)]
MAINTAINERS: Add an entry for the include/sysemu/rng*.h files
These headers are used by the virtio-rng and rng backends code,
so they should be listed in the same section in MAINTAINERS, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <
1456404260-26928-1-git-send-email-thuth@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Peter Maydell [Tue, 1 Mar 2016 15:54:03 +0000 (15:54 +0000)]
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Tue 01 Mar 2016 15:48:04 GMT using RSA key ID
81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/tracing-pull-request:
trace: Add a proper API to manage auto-generated events from the 'tcg' property
trace: Add 'vcpu' event property to trace guest vCPU
typedefs: Add CPUState
trace: Add helper function to cast event arguments
tcg: Move definition of type TCGv
tcg: Add type for vCPU pointers
trace: Remove unnecessary intermediate event copies
trace: Extend API to manage event arguments
vl: fix tracing initialization
trace: use addresses instead of offsets in memory tracepoints
trace: split subpage MMIOs into their own trace events.
trace: docs: "simple" backend does support strings
trace: drop trailing empty strings
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Lluís Vilanova [Thu, 25 Feb 2016 13:06:30 +0000 (14:06 +0100)]
trace: Add a proper API to manage auto-generated events from the 'tcg' property
Formalizes the existence of the 'event_trans' and 'event_exec' event
attributes, which until now were monkey-patched only when necessary.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id:
145640558759.20978.
6374959404425591089.stgit@localhost
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Lluís Vilanova [Thu, 25 Feb 2016 16:43:38 +0000 (17:43 +0100)]
trace: Add 'vcpu' event property to trace guest vCPU
This property identifies events that trace vCPU-specific information.
It adds a "CPUState*" argument to events with the property, identifying
the vCPU raising the event. TCG translation events also have a
"TCGv_env" implicit argument that is later used as the "CPUState*"
argument at execution time.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id:
145641861797.30295.
6991314023181842105.stgit@localhost
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Lluís Vilanova [Thu, 25 Feb 2016 16:43:32 +0000 (17:43 +0100)]
typedefs: Add CPUState
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id:
145641861239.30295.
8564457138934628740.stgit@localhost
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Lluís Vilanova [Thu, 25 Feb 2016 16:43:27 +0000 (17:43 +0100)]
trace: Add helper function to cast event arguments
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id:
145641860680.30295.
1873612736245870753.stgit@localhost
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Lluís Vilanova [Thu, 25 Feb 2016 16:43:21 +0000 (17:43 +0100)]
tcg: Move definition of type TCGv
The target-dependant type TCGv must be defined in "tcg/tcg.h" before
including the tracing helper wrappers in "tcg/tcg-op.h".
It also makes more sense to define it here, where other TCG types are
defined too.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id:
145641860129.30295.
17554707227384022653.stgit@localhost
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Lluís Vilanova [Thu, 25 Feb 2016 16:43:15 +0000 (17:43 +0100)]
tcg: Add type for vCPU pointers
Adds the 'TCGv_env' type for pointers to 'CPUArchState' objects. The
tracing infrastructure later needs to differentiate between regular
pointers and pointers to vCPUs.
Also changes all targets to use the new 'TCGv_env' type instead of the
generic 'TCGv_ptr'. As of now, the change is merely cosmetic ('TCGv_env'
translates into 'TCGv_ptr'), but that could change in the future to
enforce the difference.
Note that a 'TCGv_env' type (for 'CPUState') is not added, since all
helpers currently receive the architecture-specific
pointer ('CPUArchState').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Acked-by: Richard Henderson <rth@twiddle.net>
Message-id:
145641859552.30295.
7821536833590725201.stgit@localhost
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Lluís Vilanova [Thu, 25 Feb 2016 16:43:10 +0000 (17:43 +0100)]
trace: Remove unnecessary intermediate event copies
The current code forces the use of a chain of ".original" dereferences,
which looks odd.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id:
145641858988.30295.
7223459456488075843.stgit@localhost
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Lluís Vilanova [Thu, 25 Feb 2016 16:43:04 +0000 (17:43 +0100)]
trace: Extend API to manage event arguments
Lets the user manage event arguments as a list, and simplifies argument
concatenation.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
145641858432.30295.
3069911069472672646.stgit@localhost
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Denis V. Lunev [Tue, 9 Feb 2016 16:49:05 +0000 (19:49 +0300)]
vl: fix tracing initialization
we should call trace_init_backends() before trace_init_file() for
CONFIG_TRACE_SIMPLE There is no difference for other cases.
This problem was introduced by the commit
commit
41fc57e44ed64cd4ab5393d83624afd897dabd4f
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Thu Jan 7 16:55:24 2016 +0300
trace: split trace_init_file out of trace_init_backends
'make check' was failed as a result if configured with
--enable-trace-backends=simple
Spotted by Alex Bennée.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id:
1455036545-14870-1-git-send-email-den@openvz.org
CC: Alex Bennée <alex.bennee@linaro.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Hollis Blanchard [Tue, 9 Feb 2016 00:03:05 +0000 (16:03 -0800)]
trace: use addresses instead of offsets in memory tracepoints
When memory_region_ops tracepoints are enabled, calculate and record the
absolute address being accessed. Otherwise, we only get offsets into the
memory region instead of addresses.
[Fixed "offset" -> "addr" in trace event format strings.
--Stefan]
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Message-id:
1454976185-30095-3-git-send-email-hollis_blanchard@mentor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Hollis Blanchard [Tue, 9 Feb 2016 00:03:04 +0000 (16:03 -0800)]
trace: split subpage MMIOs into their own trace events.
Previously, a single MMIO could trigger the memory_region_ops tracepoint twice:
once on its way into subpage ops, then later on its way into the model's ops.
Also, the fields previously called "addr" are actually offsets into the memory
region. Rename them to "offset" while we're editing the tracepoint definitions.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Message-id:
1454976185-30095-2-git-send-email-hollis_blanchard@mentor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Hollis Blanchard [Tue, 9 Feb 2016 00:03:03 +0000 (16:03 -0800)]
trace: docs: "simple" backend does support strings
The simple tracing backend has supported strings for more than three years
(
62bab73213ba885426a781eb2741670b9f3cae36).
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Message-id:
1454976185-30095-1-git-send-email-hollis_blanchard@mentor.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Greg Kurz [Mon, 11 Jan 2016 17:30:36 +0000 (18:30 +0100)]
trace: drop trailing empty strings
Also fix a typo in the virtio_balloon_handle_output() trace while here.
[The double-quoting was a limitation of the old tracetool.sh script.
The modern tracetool.py script does not require double-quotes at the end
of the line. See commit
cf85cf8e972f3ad79f203be4edb7968d6e052293
("trace: Format strings must begin/end with double quotes").
--Stefan]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id:
20160111173036.24764.59878.stgit@bahia.huguette.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Tue, 1 Mar 2016 13:09:55 +0000 (13:09 +0000)]
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-
20160301' into staging
Assorted fixes, cleanups and enhancements.
# gpg: Signature made Tue 01 Mar 2016 11:45:12 GMT using RSA key ID
C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
* remotes/cohuck/tags/s390x-
20160301:
s390x/css: only suspend when enabled by orb
MAINTAINERS: Remove entry for hw/s390x/s390-virtio-bus.[ch]
MAINTAINERS: Remove the old s390-virtio machine
s390x/pci: use PCI_MSIX_FLAGS on retrieving the MSIX entries
s390x/css: Use static initialization for channel_subsys fields
s390x/css: Allocate channel_subsys statically
s390x/pci: fix reg/dereg irq functions
s390x/css: introduce indicator refcounting interfaces
s390x/virtio: old machine leftovers
watchdog/diag288: avoid race condition on expired watchdog
s390x: remove {kvm_}s390_virtio_irq()
s390x: fix debug statement in trigger_page_fault()
s390x/kvm: sync fprs via kvm_run
linux-headers: update against kvm/next
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 1 Mar 2016 12:18:23 +0000 (12:18 +0000)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-seabios-
20160301-1' into staging
seabios: update to 1.9.1 stable release
# gpg: Signature made Tue 01 Mar 2016 08:39:53 GMT using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-seabios-
20160301-1:
seabios: update to 1.9.1 stable release
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cornelia Huck [Mon, 22 Feb 2016 15:43:04 +0000 (16:43 +0100)]
s390x/css: only suspend when enabled by orb
We must not allow a channel program to suspend if the suspend
control bit in the orb had not been specified.
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Thomas Huth [Thu, 25 Feb 2016 10:45:00 +0000 (11:45 +0100)]
MAINTAINERS: Remove entry for hw/s390x/s390-virtio-bus.[ch]
The files have been deleted recently, no need to keep these entries
anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
1456397100-22746-1-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Thomas Huth [Thu, 25 Feb 2016 09:57:54 +0000 (10:57 +0100)]
MAINTAINERS: Remove the old s390-virtio machine
The old s390-virtio machine has been removed last year, so we don't
need the corresponding section in the MAINTAINERS file anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
1456394274-21082-1-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Wei Yang [Fri, 19 Feb 2016 15:18:11 +0000 (15:18 +0000)]
s390x/pci: use PCI_MSIX_FLAGS on retrieving the MSIX entries
Even PCI_CAP_FLAGS has the same value as PCI_MSIX_FLAGS, the later one is
the more proper on retrieving MSIX entries.
This patch uses PCI_MSIX_FLAGS to retrieve the MSIX entries.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <
1455895091-7589-3-git-send-email-richard.weiyang@gmail.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Eduardo Habkost [Tue, 16 Feb 2016 20:59:06 +0000 (18:59 -0200)]
s390x/css: Use static initialization for channel_subsys fields
machine_init() will be gone, but we don't need it if we just
initialize the channel_subsys fields statically.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
1455656347-29033-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
[adapted on top of indicator changes]
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Eduardo Habkost [Tue, 16 Feb 2016 20:59:05 +0000 (18:59 -0200)]
s390x/css: Allocate channel_subsys statically
There's no need to use g_malloc0() to allocate the channel_subsys
struct, just use a static variable.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
1455656347-29033-3-git-send-email-ehabkost@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
[adapted on top of indicator changes]
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Yi Min Zhao [Thu, 28 Jan 2016 05:26:43 +0000 (13:26 +0800)]
s390x/pci: fix reg/dereg irq functions
Indicator refcounting interfaces are introduced. This patch fixes
introducing unneeded indicator mappings and failure to release
AISB mappings on deregistration.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Yi Min Zhao [Wed, 27 Jan 2016 08:05:26 +0000 (16:05 +0800)]
s390x/css: introduce indicator refcounting interfaces
Currently, virtio-ccw uses its own interfaces to keep indicators mapped
just once even if the same address has been registered multiple times.
These interfaces fit the PCI use case as well. Therefore, move them to
css and make them generic interfaces.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cornelia Huck [Wed, 10 Feb 2016 12:22:32 +0000 (13:22 +0100)]
s390x/virtio: old machine leftovers
Remove some now unused #defines.
Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Sascha Silbe [Fri, 29 Jan 2016 14:51:45 +0000 (15:51 +0100)]
watchdog/diag288: avoid race condition on expired watchdog
When configured to inject an NMI, watchdog_perform_action() may cause
the BQL to be temporarily relinquished (inject_nmi() → ... →
s390_nmi() → s390_cpu_restart() → run_on_cpu()). When the guest issues
diag 288 again in response to the NMI, the diag 288 operation will
race against wdt_diag288_reset(). Depending on scheduler behaviour,
wdt_diag288_reset() may be run after the guest issued a diag 288
Init. As a result, we will cancel the timer the guest just set up. The
effect observed by the guest is that a second expiry does not trigger
the watchdog action and diag 288 Change operations fail.
Fix this by resetting the timer _before_ invoking the action.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Acked-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cornelia Huck [Wed, 27 Jan 2016 12:39:53 +0000 (13:39 +0100)]
s390x: remove {kvm_}s390_virtio_irq()
This interface was only used by the old virtio machine and therefore
is not needed anymore.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
David Hildenbrand [Mon, 25 Jan 2016 08:03:57 +0000 (09:03 +0100)]
s390x: fix debug statement in trigger_page_fault()
When mmu_translate debugging output is enabled, code won't compile.
Let's just use the same statement as in trigger_prot_fault().
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
David Hildenbrand [Tue, 2 Feb 2016 08:08:58 +0000 (09:08 +0100)]
s390x/kvm: sync fprs via kvm_run
We can now also sync the fprs via kvm_run, avoiding one ioctl.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cornelia Huck [Mon, 22 Feb 2016 12:36:17 +0000 (13:36 +0100)]
linux-headers: update against kvm/next
Update against commit
efef127c, but keep userfaultd.h.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Peter Maydell [Tue, 1 Mar 2016 11:15:00 +0000 (11:15 +0000)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-input-
20160301-1' into staging
qapi: fix input-send-event and promote to stable
# gpg: Signature made Tue 01 Mar 2016 08:19:52 GMT using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-input-
20160301-1:
qapi: promote input-send-event to stable
qapi: rename InputAxis values.
qapi: rename input buttons
qapi: switch x-input-send-event from console to device+head
console: add & use qemu_console_lookup_by_device_name
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 1 Mar 2016 10:34:19 +0000 (10:34 +0000)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-
20160301-1' into staging
vga: minor cirrus/qxl bugfixes.
# gpg: Signature made Tue 01 Mar 2016 07:16:22 GMT using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-vga-
20160301-1:
qxl: lock current_async update in qxl_soft_reset
cirrus_vga: fix off-by-one in blit_region_is_unsafe
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 1 Mar 2016 09:54:53 +0000 (09:54 +0000)]
Merge remote-tracking branch 'remotes/cody/tags/block-pull-request' into staging
# gpg: Signature made Mon 29 Feb 2016 20:08:16 GMT using RSA key ID
C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg: aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg: aka "Jeffrey Cody <codyprime@gmail.com>"
* remotes/cody/tags/block-pull-request:
iotests/124: Add cluster_size mismatch test
block/backup: avoid copying less than full target clusters
block/backup: make backup cluster size configurable
mirror: Add mirror_wait_for_io
mirror: Rewrite mirror_iteration
vhdx: Simplify vhdx_set_shift_bits()
vhdx: DIV_ROUND_UP() in vhdx_calc_bat_entries()
iscsi: add support for getting CHAP password via QCryptoSecret API
curl: add support for HTTP authentication parameters
rbd: add support for getting password from QCryptoSecret object
sheepdog: allow to delete snapshot
block/nfs: add support for setting debug level
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gerd Hoffmann [Tue, 1 Mar 2016 08:36:14 +0000 (09:36 +0100)]
seabios: update to 1.9.1 stable release
git shortlog rel-1.9.0..rel-1.9.1
=================================
Cole Robinson (1):
biostables: Support SMBIOS 2.6+ UUID format
Kevin O'Connor (7):
xhci: Check for device disconnects during USB2 reset polling
xhci: Wait for port enable even for USB3 devices
sdcard: Only enable error_irq_enable for bits defined in SDHCI v1 spec
sdcard: fix typo causing 32bit write to 16bit block_size field
nmi: Don't try to switch onto extra stack in NMI handler
scsi: Do not call printf() from scsi_is_ready()
coreboot: Check for unaligned cbfs header
Marcel Apfelbaum (1):
fw/pci: do not automatically allocate IO region for PCIe bridges
Roger Pau Monne (1):
build: fix typo in buildversion.py
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 12 Jan 2016 11:39:33 +0000 (12:39 +0100)]
qapi: promote input-send-event to stable
With all fixups being in place now, we can promote input-send-event
to stable abi by removing the x- prefix.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Gerd Hoffmann [Tue, 12 Jan 2016 11:34:20 +0000 (12:34 +0100)]
qapi: rename InputAxis values.
Lowercase them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Gerd Hoffmann [Tue, 12 Jan 2016 11:14:12 +0000 (12:14 +0100)]
qapi: rename input buttons
All lowercase, use-dash instead of CamelCase.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Gerd Hoffmann [Tue, 12 Jan 2016 11:11:14 +0000 (12:11 +0100)]
qapi: switch x-input-send-event from console to device+head
Use display device qdev id and head number instead of console index to
specify the QemuConsole. This makes things consistent with input
devices (for input routing) and vnc server configuration, which both use
display and head too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Gerd Hoffmann [Tue, 12 Jan 2016 10:45:43 +0000 (11:45 +0100)]
console: add & use qemu_console_lookup_by_device_name
We have two places needing this, and a third one will come shortly.
So factor things out into a helper function to reduce code duplication.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Gerd Hoffmann [Tue, 20 Oct 2015 07:57:30 +0000 (09:57 +0200)]
qxl: lock current_async update in qxl_soft_reset
This should fix a defect report from Coverity.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 10 Feb 2016 16:17:39 +0000 (17:17 +0100)]
cirrus_vga: fix off-by-one in blit_region_is_unsafe
The "max" value is being compared with >=, but addr + width points to
the first byte that will _not_ be copied. Laszlo suggested using a
"greater than" comparison, instead of subtracting one like it is
already done above for the height, so that max remains always positive.
The mistake is "safe"---it will reject some blits, but will never cause
out-of-bounds writes.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id:
1455121059-18280-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
John Snow [Thu, 25 Feb 2016 20:58:31 +0000 (15:58 -0500)]
iotests/124: Add cluster_size mismatch test
If a backing file isn't specified in the target image and the
cluster_size is larger than the bitmap granularity, we run the risk of
creating bitmaps with allocated clusters but empty/no data which will
prevent the proper reading of the backup in the future.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id:
1456433911-24718-4-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
John Snow [Thu, 25 Feb 2016 20:58:30 +0000 (15:58 -0500)]
block/backup: avoid copying less than full target clusters
During incremental backups, if the target has a cluster size that is
larger than the backup cluster size and we are backing up to a target
that cannot (for whichever reason) pull clusters up from a backing image,
we may inadvertantly create unusable incremental backup images.
For example:
If the bitmap tracks changes at a 64KB granularity and we transmit 64KB
of data at a time but the target uses a 128KB cluster size, it is
possible that only half of a target cluster will be recognized as dirty
by the backup block job. When the cluster is allocated on the target
image but only half populated with data, we lose the ability to
distinguish between zero padding and uninitialized data.
This does not happen if the target image has a backing file that points
to the last known good backup.
Even if we have a backing file, though, it's likely going to be faster
to just buffer the redundant data ourselves from the live image than
fetching it from the backing file, so let's just always round up to the
target granularity.
The same logic applies to backup modes top, none, and full. Copying
fractional clusters without the guarantee of COW is dangerous, but even
if we can rely on COW, it's likely better to just re-copy the data.
Reported-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id:
1456433911-24718-3-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
John Snow [Thu, 25 Feb 2016 20:58:29 +0000 (15:58 -0500)]
block/backup: make backup cluster size configurable
64K might not always be appropriate, make this a runtime value.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id:
1456433911-24718-2-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Fam Zheng [Fri, 5 Feb 2016 02:00:30 +0000 (10:00 +0800)]
mirror: Add mirror_wait_for_io
The three lines are duplicated a number of times now, refactor a
function.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id:
1454637630-10585-3-git-send-email-famz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Fam Zheng [Fri, 5 Feb 2016 02:00:29 +0000 (10:00 +0800)]
mirror: Rewrite mirror_iteration
The "pnum < nb_sectors" condition in deciding whether to actually copy
data is unnecessarily strict, and the qiov initialization is
unnecessarily for bdrv_aio_write_zeroes and bdrv_aio_discard.
Rewrite mirror_iteration to fix both flaws.
The output of iotests 109 is updated because we now report the offset
and len slightly differently in mirroring progress.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id:
1454637630-10585-2-git-send-email-famz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Max Reitz [Fri, 18 Dec 2015 15:04:26 +0000 (16:04 +0100)]
vhdx: Simplify vhdx_set_shift_bits()
For values which are powers of two (and we do assume all of these to
be), sizeof(x) * 8 - 1 - clz(x) == ctz(x). Therefore, use ctz().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id:
1450451066-13335-3-git-send-email-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Max Reitz [Fri, 18 Dec 2015 15:04:25 +0000 (16:04 +0100)]
vhdx: DIV_ROUND_UP() in vhdx_calc_bat_entries()
We have DIV_ROUND_UP(), so we can use it to produce more easily readable
code. It may be slower than the bit shifting currently performed
(because it actually performs a division), but since
vhdx_calc_bat_entries() is never used in a hot path, this is completely
fine.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id:
1450451066-13335-2-git-send-email-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Daniel P. Berrange [Thu, 21 Jan 2016 14:19:21 +0000 (14:19 +0000)]
iscsi: add support for getting CHAP password via QCryptoSecret API
The iSCSI driver currently accepts the CHAP password in plain text
as a block driver property. This change adds a new "password-secret"
property that accepts the ID of a QCryptoSecret instance.
$QEMU \
-object secret,id=sec0,filename=/home/berrange/example.pw \
-drive driver=iscsi,url=iscsi://example.com/target-foo/lun1,\
user=dan,password-secret=sec0
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1453385961-10718-4-git-send-email-berrange@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Daniel P. Berrange [Thu, 21 Jan 2016 14:19:20 +0000 (14:19 +0000)]
curl: add support for HTTP authentication parameters
If connecting to a web server which has authentication
turned on, QEMU gets a 401 as curl has not been configured
with any authentication credentials.
This adds 4 new parameters to the curl block driver
options 'username', 'password-secret', 'proxy-username'
and 'proxy-password-secret'. Passwords are provided using
the recently added 'secret' object type
$QEMU \
-object secret,id=sec0,filename=/home/berrange/example.pw \
-object secret,id=sec1,filename=/home/berrange/proxy.pw \
-drive driver=http,url=http://example.com/some.img,\
username=dan,password-secret=sec0,\
proxy-username=dan,proxy-password-secret=sec1
Of course it is possible to use the same secret for both the
proxy & server passwords if desired, or omit the proxy auth
details, or the server auth details as required.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1453385961-10718-3-git-send-email-berrange@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Daniel P. Berrange [Thu, 21 Jan 2016 14:19:19 +0000 (14:19 +0000)]
rbd: add support for getting password from QCryptoSecret object
Currently RBD passwords must be provided on the command line
via
$QEMU -drive file=rbd:pool/image:id=myname:\
key=QVFDVm41aE82SHpGQWhBQXEwTkN2OGp0SmNJY0UrSE9CbE1RMUE=:\
auth_supported=cephx
This is insecure because the key is visible in the OS process
listing.
This adds support for an 'password-secret' parameter in the RBD
parameters that can be used with the QCryptoSecret object to
provide the password via a file:
echo "QVFDVm41aE82SHpGQWhBQXEwTkN2OGp0SmNJY0UrSE9CbE1RMUE=" > poolkey.b64
$QEMU -object secret,id=secret0,file=poolkey.b64,format=base64 \
-drive driver=rbd,filename=rbd:pool/image:id=myname:\
auth_supported=cephx,password-secret=secret0
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id:
1453385961-10718-2-git-send-email-berrange@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Vasiliy Tolstov [Wed, 23 Dec 2015 12:22:26 +0000 (21:22 +0900)]
sheepdog: allow to delete snapshot
This patch implements a blockdriver function bdrv_snapshot_delete() in
the sheepdog driver. With the new function, snapshots of sheepdog can
be deleted from libvirt.
Cc: Jeff Cody <jcody@redhat.com>
Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru>
Message-id:
1450873346-22334-1-git-send-email-mitake.hitoshi@lab.ntt.co.jp
Signed-off-by: Jeff Cody <jcody@redhat.com>
Peter Lieven [Mon, 9 Nov 2015 07:09:33 +0000 (08:09 +0100)]
block/nfs: add support for setting debug level
recent libnfs versions support logging debug messages. Add
support for it in qemu through an URL parameter.
Example:
qemu -cdrom nfs://127.0.0.1/iso/my.iso?debug=2
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id:
1447052973-14513-1-git-send-email-pl@kamp.de
Signed-off-by: Jeff Cody <jcody@redhat.com>
Peter Maydell [Mon, 29 Feb 2016 12:24:26 +0000 (12:24 +0000)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-
20160229-1' into staging
usb: redirect bugfix, MAINTAINERS update.
# gpg: Signature made Mon 29 Feb 2016 11:09:54 GMT using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-usb-
20160229-1:
usb-redirect: Avoid double free of data
MAINTAINERS: Add some missing entries for USB related files
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 29 Feb 2016 11:49:50 +0000 (11:49 +0000)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-ui-
20160229-1' into staging
ui: spice dmabuf fix, MAINTAINERS updates.
# gpg: Signature made Mon 29 Feb 2016 10:41:15 GMT using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-ui-
20160229-1:
MAINTAINERS: Add an entry for the include/ui/ folder
MAINTAINERS: Add spice-display.h to the SPICE section
spice/gl: Enable dmabuf only for spice >= 0.13.1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 29 Feb 2016 11:24:36 +0000 (11:24 +0000)]
Merge remote-tracking branch 'remotes/kraxel/tags/pull-fw-cfg-
20160226-1' into staging
fw_cfg: unbreak migration compatibility for 2.4 and earlier machines
# gpg: Signature made Fri 26 Feb 2016 09:45:50 GMT using RSA key ID
D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-fw-cfg-
20160226-1:
fw_cfg: unbreak migration compatibility for 2.4 and earlier machines
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 29 Feb 2016 10:51:11 +0000 (10:51 +0000)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.6-
20160229' into staging
ppc patch queue for 2016-02-29
Some more accumulated patches for target-ppc, pseries machine type and
related devices to fit in before the qemu-2.6 soft freeze.
* Mostly bugfixes and small cleanups for spapr and Mac platforms
# gpg: Signature made Mon 29 Feb 2016 06:56:34 GMT using RSA key ID
20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.6-
20160229:
xics: report errors with the QEMU Error API
migration: allow machine to enforce configuration section migration
spapr: skip configuration section during migration of older machines
dbdma: warn when using unassigned channel
spapr: disable vmdesc submission for old machines
spapr_pci: fix irq leak in RTAS ibm,change-msi
spapr_pci: kill useless variable in rtas_ibm_change_msi()
spapr_rng: disable hotpluggability
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fam Zheng [Wed, 24 Feb 2016 08:08:08 +0000 (16:08 +0800)]
usb-redirect: Avoid double free of data
If dropping packets, data is freed, the caller's loop should not continue.
Reported by ccc-analyzer.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id:
1456301288-1592-1-git-send-email-famz@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Thomas Huth [Thu, 25 Feb 2016 09:36:05 +0000 (10:36 +0100)]
MAINTAINERS: Add some missing entries for USB related files
USB-related docs and include files should go into the USB
section of the MAINTAINERS file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id:
1456392967-20274-2-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Thomas Huth [Thu, 25 Feb 2016 09:36:07 +0000 (10:36 +0100)]
MAINTAINERS: Add an entry for the include/ui/ folder
The ui/ folder is listed in the "Graphics" section, so I think
the "include/ui/" folder should be listed there, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id:
1456392967-20274-4-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Thomas Huth [Thu, 25 Feb 2016 09:36:06 +0000 (10:36 +0100)]
MAINTAINERS: Add spice-display.h to the SPICE section
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id:
1456392967-20274-3-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Michal Privoznik [Wed, 24 Feb 2016 12:42:18 +0000 (13:42 +0100)]
spice/gl: Enable dmabuf only for spice >= 0.13.1
After
474114b7 the dmabuf feature is enabled whenever spice
greater than or equal to spice 0.13.0 is found. This is because
two new functions are required: spice_qxl_gl_scanout and
spice_qxl_gl_draw_async. These were, however, introduce in 0.13.1
release. Well, technically they haven't been released yet, but
for sure they are not going to be part of 0.13.0 release (for the
ABI stability sake).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-id:
1a724e97cb587624d6f6009c15395496bccfa32b.
1456317738.git.mprivozn@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Greg Kurz [Fri, 26 Feb 2016 09:44:07 +0000 (10:44 +0100)]
xics: report errors with the QEMU Error API
Using the return value to report errors is error prone:
- xics_alloc() returns -1 on error but spapr_vio_busdev_realize() errors
on 0
- xics_alloc_block() returns the unclear value of ics->offset - 1 on error
but both rtas_ibm_change_msi() and spapr_phb_realize() error on 0
This patch adds an errp argument to xics_alloc() and xics_alloc_block() to
report errors. The return value of these functions is a valid IRQ number
if errp is NULL. It is undefined otherwise.
The corresponding error traces get promotted to error messages. Note that
the "can't allocate IRQ" error message in spapr_vio_busdev_realize() also
moves to xics_alloc(). Similar error message consolidation isn't really
applicable to xics_alloc_block() because callers have extra context (device
config address, MSI or MSIX).
This fixes the issues mentioned above.
Based on previous work from Brian W. Hart.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Thu, 18 Feb 2016 11:32:25 +0000 (12:32 +0100)]
migration: allow machine to enforce configuration section migration
Migration of pseries-2.3 doesn't have configuration section. Unfortunately,
QEMU 2.4/2.4.1/2.5 are buggy and always stream and expect the configuration
section, and break migration both ways.
This patch introduces a property which allows to enforce a configuration
section for machines who don't have one.
It can be set at startup:
-machine enforce-config-section=on
or later from the QEMU monitor:
qom-set /machine enforce-config-section on
It is up to the tooling to set or unset this property according to the
version of the QEMU at the other end of the pipe.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Thu, 18 Feb 2016 11:32:18 +0000 (12:32 +0100)]
spapr: skip configuration section during migration of older machines
Since QEMU 2.4, we have a configuration section in the migration stream.
This must be skipped for older machines, like it is already done for x86.
This patch fixes the migration of pseries-2.3 from/to QEMU 2.3, but it
breaks migration of the same machine from/to QEMU 2.4/2.4.1/2.5. We do
that anyway because QEMU 2.3 is likely to be more widely deployed than
newer QEMU versions.
Fixes:
61964c23e5ddd5a33f15699e45ce126f879e3e33
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Hervé Poussineau [Thu, 25 Feb 2016 12:02:11 +0000 (13:02 +0100)]
dbdma: warn when using unassigned channel
With this, it's easier to know if a guest uses an invalid and/or unimplemented
DMA channel.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Tue, 23 Feb 2016 16:47:59 +0000 (17:47 +0100)]
spapr: disable vmdesc submission for old machines
Since QEMU 2.3, we have a vmdesc section in the migration stream.
This section is not mandatory but when migrating a pseries-2.2
machine from QEMU 2.2, you get a warning at the destination:
qemu-system-ppc64: Expected vmdescription section, but got 0
The warning goes away if we decide to skip vmdesc as well for
older pseries, like it is already done for pc's.
This can only be observed with -cpu POWER7 because POWER8
cannot migrate from QEMU 2.2 to 2.3 (insns_flags2 mismatch).
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Thu, 25 Feb 2016 18:02:18 +0000 (19:02 +0100)]
spapr_pci: fix irq leak in RTAS ibm,change-msi
This RTAS call is used to request new interrupts or to free all interrupts.
If the driver has already allocated interrupts and asks again for a non-null
number of irqs, then the rtas_ibm_change_msi() function will silently leak
the previous interrupts.
It happens because xics_free() is only called when the driver releases all
interrupts (!req_num case). Note that the previously allocated spapr_pci_msi
is not leaked because the GHashTable is created with destroy functions and
g_hash_table_insert() hence frees the old value.
This patch makes sure any previously allocated MSIs are released when a
new allocation succeeds.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Thu, 25 Feb 2016 18:02:12 +0000 (19:02 +0100)]
spapr_pci: kill useless variable in rtas_ibm_change_msi()
The num local variable is initialized to zero and has no writer.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Thu, 25 Feb 2016 11:08:00 +0000 (12:08 +0100)]
spapr_rng: disable hotpluggability
It is currently possible to hotplug a spapr_rng device but QEMU crashes
when we try to hot unplug:
ERROR:hw/core/qdev.c:295:qdev_unplug: assertion failed: (hotplug_ctrl)
Aborted
This happens because spapr_rng isn't plugged to any bus and sPAPR does
not provide hotplug support for it: qdev_get_hotplug_handler() hence
return NULL and we hit the assertion.
And anyway, it doesn't make much sense to unplug this device since hcalls
cannot be unregistered. Even the idea of hotplugging a RNG device instead
of declaring it on the QEMU command line looks weird.
This patch simply disables hotpluggability for the spapr-rng class.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Peter Maydell [Fri, 26 Feb 2016 16:02:00 +0000 (16:02 +0000)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20160226' into staging
target-arm queue:
* Clean up handling of bad mode switches writing to CPSR, and implement
the ARMv8 requirement that they set PSTATE.IL
* Implement MDCR_EL3.TPM and MDCR_EL2.TPM traps on perf monitor
register accesses
* Don't implement stellaris-pl061-only registers on generic-pl061
* Fix SD card handling for raspi
* Add missing include files to MAINTAINERS
* Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW
* Make reserved ranges in ID_AA64* spaces RAZ, not UNDEF
# gpg: Signature made Fri 26 Feb 2016 15:19:07 GMT using RSA key ID
14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
* remotes/pmaydell/tags/pull-target-arm-
20160226:
target-arm: Make reserved ranges in ID_AA64* spaces RAZ, not UNDEF
target-arm: Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW
sdhci: add quirk property for card insert interrupt status on Raspberry Pi
sdhci: Revert "add optional quirk property to disable card insertion/removal interrupts"
MAINTAINERS: Add some missing ARM related header files
raspi: fix SD card with recent sdhci changes
ARM: PL061: Checking register r/w accesses to reserved area
target-arm: Implement MDCR_EL3.TPM and MDCR_EL2.TPM traps
target-arm: Fix handling of SDCR for 32-bit code
target-arm: Make Monitor->NS PL1 mode changes illegal if HCR.TGE is 1
target-arm: Make mode switches from Hyp via CPS and MRS illegal
target-arm: In v8, make illegal AArch32 mode changes set PSTATE.IL
target-arm: Forbid mode switch to Mon from Secure EL1
target-arm: Add Hyp mode checks to bad_mode_switch()
target-arm: Add comment about not implementing NSACR.RFR
target-arm: In cpsr_write() ignore mode switches from User mode
linux-user: Use restrictive mask when calling cpsr_write()
target-arm: Raw CPSR writes should skip checks and bank switching
target-arm: Add write_type argument to cpsr_write()
target-arm: Give CPSR setting on 32-bit exception return its own helper
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 26 Feb 2016 15:21:26 +0000 (15:21 +0000)]
Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.6-5' into staging
migration pull
- fix a qcow2 assert
- fix for older distros (CentOS 5)
- documentation for vmstate flags
- minor code rearrangement
# gpg: Signature made Fri 26 Feb 2016 15:15:15 GMT using RSA key ID
854083B6
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit-migration/tags/migration-for-2.6-5:
migration (postcopy): move bdrv_invalidate_cache_all of of coroutine context
migration (ordinary): move bdrv_invalidate_cache_all of of coroutine context
migration/vmstate: document VMStateFlags
MAINTAINERS: Add docs/migration.txt to the "Migration" section
migration/postcopy-ram: Guard use of sys/eventfd.h with CONFIG_EVENTFD
migration: reorder code to make it symmetric
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Denis V. Lunev [Wed, 24 Feb 2016 08:53:39 +0000 (11:53 +0300)]
migration (postcopy): move bdrv_invalidate_cache_all of of coroutine context
There is a possibility to hit an assert in qcow2_get_specific_info that
s->qcow_version is undefined. This happens when VM in starting from
suspended state, i.e. it processes incoming migration, and in the same
time 'info block' is called.
The problem is that qcow2_invalidate_cache() closes the image and
memset()s BDRVQcowState in the middle.
The patch moves processing of bdrv_invalidate_cache_all out of
coroutine context for postcopy migration to avoid that. This function
is called with the following stack:
process_incoming_migration_co
qemu_loadvm_state
qemu_loadvm_state_main
loadvm_process_command
loadvm_postcopy_handle_run
Signed-off-by: Denis V. Lunev <den@openvz.org>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
Message-Id: <
1456304019-10507-3-git-send-email-den@openvz.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Denis V. Lunev [Wed, 24 Feb 2016 08:53:38 +0000 (11:53 +0300)]
migration (ordinary): move bdrv_invalidate_cache_all of of coroutine context
There is a possibility to hit an assert in qcow2_get_specific_info that
s->qcow_version is undefined. This happens when VM in starting from
suspended state, i.e. it processes incoming migration, and in the same
time 'info block' is called.
The problem is that qcow2_invalidate_cache() closes the image and
memset()s BDRVQcowState in the middle.
The patch moves processing of bdrv_invalidate_cache_all out of
coroutine context for standard migration to avoid that.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
Message-Id: <
1456304019-10507-2-git-send-email-den@openvz.org>
[Amit: Fix a use-after-free bug]
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Peter Maydell [Fri, 19 Feb 2016 14:07:43 +0000 (14:07 +0000)]
target-arm: Make reserved ranges in ID_AA64* spaces RAZ, not UNDEF
The v8 ARM ARM defines that unused spaces in the ID_AA64* system
register ranges are Reserved and must RAZ, rather than being UNDEF.
Implement this.
In particular, ARM v8.2 adds a new feature register ID_AA64MMFR2,
and newer versions of the Linux kernel will attempt to read this,
which causes them not to boot up on versions of QEMU missing this fix.
Since the encoding .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 6
is actually defined in ARMv8 (as ID_MMFR4), we give it an entry in
the ARMCPU struct so CPUs can override it, though since none do
this too will just RAZ.
Cc: qemu-stable@nongnu.org
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1455890863-11203-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Edgar E. Iglesias [Fri, 26 Feb 2016 12:45:39 +0000 (13:45 +0100)]
target-arm: Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW
Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW due to the register not
having any underlying state. This fixes an issue with booting
KVM enabled kernels when EL2 is on.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id:
1456490739-19343-1-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Baumann [Thu, 25 Feb 2016 21:35:30 +0000 (13:35 -0800)]
sdhci: add quirk property for card insert interrupt status on Raspberry Pi
This quirk is a workaround for the following hardware behaviour, on
which UEFI (specifically, the bootloader for Windows on Pi2) depends:
1. at boot with an SD card present, the interrupt status/enable
registers are initially zero
2. upon enabling it in the interrupt enable register, the card insert
bit in the interrupt status register is immediately set
3. after a subsequent controller reset, the card insert interrupt does
not fire, even if enabled in the interrupt enable register
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id:
1456436130-7048-3-git-send-email-Andrew.Baumann@microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Baumann [Thu, 25 Feb 2016 21:35:29 +0000 (13:35 -0800)]
sdhci: Revert "add optional quirk property to disable card insertion/removal interrupts"
This reverts commit
723697551a7e926abe7d3c7f2966012b8075143d.
This change was poorly tested on my part. It squelched card insertion
interrupts on reset, but that was not necessary because sdhci_reset()
clears all the registers (via the call to memset), so the subsequent
sdhci_insert_eject_cb() call never sees the card insert interrupt
enabled. However, not calling the insert_eject_cb results in prnsts
remaining 0, when it actually needs to be updated to indicate card
presence and R/O status.
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id:
1456436130-7048-2-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>