OSDN Git Service
Ming Lei [Wed, 27 Feb 2019 16:02:11 +0000 (00:02 +0800)]
mmc: core: align max segment size with logical block size
[ Upstream commit
c53336c8f5f29043fded57912cc06c24e12613d7 ]
Logical block size is the lowest possible block size that the storage
device can address. Max segment size is often related with controller's
DMA capability. And it is reasonable to align max segment size with
logical block size.
SDHCI sets un-aligned max segment size, and causes ADMA error, so
fix it by aligning max segment size with logical block size.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Faiz Abbas <faiz_abbas@ti.com>
Cc: linux-block@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peng Sun [Tue, 26 Feb 2019 14:15:37 +0000 (22:15 +0800)]
bpf: decrease usercnt if bpf_map_new_fd() fails in bpf_map_get_fd_by_id()
[ Upstream commit
781e62823cb81b972dc8652c1827205cda2ac9ac ]
In bpf/syscall.c, bpf_map_get_fd_by_id() use bpf_map_inc_not_zero()
to increase the refcount, both map->refcnt and map->usercnt. Then, if
bpf_map_new_fd() fails, should handle map->usercnt too.
Fixes:
bd5f5f4ecb78 ("bpf: Add BPF_MAP_GET_FD_BY_ID")
Signed-off-by: Peng Sun <sironhide0null@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maciej Kwiecien [Fri, 22 Feb 2019 08:45:26 +0000 (09:45 +0100)]
sctp: don't compare hb_timer expire date before starting it
[ Upstream commit
d1f20c03f48102e52eb98b8651d129b83134cae4 ]
hb_timer might not start at all for a particular transport because its
start is conditional. In a result a node is not sending heartbeats.
Function sctp_transport_reset_hb_timer has two roles:
- initial start of hb_timer for a given transport,
- update expire date of hb_timer for a given transport.
The function is optimized to update timer's expire only if it is before
a new calculated one but this comparison is invalid for a timer which
has not yet started. Such a timer has expire == 0 and if a new expire
value is bigger than (MAX_JIFFIES / 2 + 2) then "time_before" macro will
fail and timer will not start resulting in no heartbeat packets send by
the node.
This was found when association was initialized within first 5 mins
after system boot due to jiffies init value which is near to MAX_JIFFIES.
Test kernel version: 4.9.154 (ARCH=arm)
hb_timer.expire = 0; //initialized, not started timer
new_expire = MAX_JIFFIES / 2 + 2; //or more
time_before(hb_timer.expire, new_expire) == false
Fixes:
ba6f5e33bdbb ("sctp: avoid refreshing heartbeat timer too often")
Reported-by: Marcin Stojek <marcin.stojek@nokia.com>
Tested-by: Marcin Stojek <marcin.stojek@nokia.com>
Signed-off-by: Maciej Kwiecien <maciej.kwiecien@nokia.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Bianconi [Tue, 19 Feb 2019 16:42:06 +0000 (17:42 +0100)]
net: ip6_gre: do not report erspan_ver for ip6gre or ip6gretap
[ Upstream commit
103d0244d29fcaf38f1339d4538919bbbc051490 ]
Report erspan version field to userspace in ip6gre_fill_info just for
erspan_v6 tunnels. Moreover report IFLA_GRE_ERSPAN_INDEX only for
erspan version 1.
The issue can be triggered with the following reproducer:
$ip link add name gre6 type ip6gre local 2001::1 remote 2002::2
$ip link set gre6 up
$ip -d link sh gre6
14: grep6@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1448 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/gre6 2001::1 peer 2002::2 promiscuity 0 minmtu 0 maxmtu 0
ip6gre remote 2002::2 local 2001::1 hoplimit 64 encaplimit 4 tclass 0x00 flowlabel 0x00000 erspan_index 0 erspan_ver 0 addrgenmode eui64
Fixes:
94d7d8f29287 ("ip6_gre: add erspan v2 support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Bianconi [Tue, 19 Feb 2019 16:42:05 +0000 (17:42 +0100)]
net: ip_gre: do not report erspan_ver for gre or gretap
[ Upstream commit
2bdf700e538828d6456150b9319e5f689b062d54 ]
Report erspan version field to userspace in ipgre_fill_info just for
erspan tunnels. The issue can be triggered with the following reproducer:
$ip link add name gre1 type gre local 192.168.0.1 remote 192.168.1.1
$ip link set dev gre1 up
$ip -d link sh gre1
13: gre1@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1476 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/gre 192.168.0.1 peer 192.168.1.1 promiscuity 0 minmtu 0 maxmtu 0
gre remote 192.168.1.1 local 192.168.0.1 ttl inherit erspan_ver 0 addrgenmode eui64 numtxqueues 1 numrxqueues 1
Fixes:
f551c91de262 ("net: erspan: introduce erspan v2 for ip_gre")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Tue, 12 Feb 2019 20:26:27 +0000 (12:26 -0800)]
net: fix possible overflow in __sk_mem_raise_allocated()
[ Upstream commit
5bf325a53202b8728cf7013b72688c46071e212e ]
With many active TCP sockets, fat TCP sockets could fool
__sk_mem_raise_allocated() thanks to an overflow.
They would increase their share of the memory, instead
of decreasing it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matteo Croce [Mon, 11 Feb 2019 14:32:36 +0000 (15:32 +0100)]
geneve: change NET_UDP_TUNNEL dependency to select
[ Upstream commit
a7603ac1fc8ce1409f8ff70e6ce505f308b2c002 ]
Due to the depends on NET_UDP_TUNNEL, at the moment it is impossible to
compile GENEVE if no other protocol depending on NET_UDP_TUNNEL is
selected.
Fix this changing the depends to a select, and drop NET_IP_TUNNEL from the
select list, as it already depends on NET_UDP_TUNNEL.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Reviewed-and-tested-by: Andrea Claudi <aclaudi@redhat.com>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bert Kenward [Tue, 12 Feb 2019 13:10:00 +0000 (13:10 +0000)]
sfc: initialise found bitmap in efx_ef10_mtd_probe
[ Upstream commit
c65285428b6e7797f1bb063f33b0ae7e93397b7b ]
The bitmap of found partitions in efx_ef10_mtd_probe was not
initialised, causing partitions to be suppressed based off whatever
value was in the bitmap at the start.
Fixes:
3366463513f5 ("sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sylwester Nawrocki [Thu, 7 Feb 2019 17:00:12 +0000 (18:00 +0100)]
ASoC: samsung: i2s: Fix prescaler setting for the secondary DAI
[ Upstream commit
323fb7b947b265753de34703dbbf8acc8ea3a4de ]
Make sure i2s->rclk_srcrate is properly initialized also during
playback through the secondary DAI.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hoang Le [Mon, 11 Feb 2019 02:18:28 +0000 (09:18 +0700)]
tipc: fix skb may be leaky in tipc_link_input
[ Upstream commit
7384b538d3aed2ed49d3575483d17aeee790fb06 ]
When we free skb at tipc_data_input, we return a 'false' boolean.
Then, skb passed to subcalling tipc_link_input in tipc_link_rcv,
<snip>
1303 int tipc_link_rcv:
...
1354 if (!tipc_data_input(l, skb, l->inputq))
1355 rc |= tipc_link_input(l, skb, l->inputq);
</snip>
Fix it by simple changing to a 'true' boolean when skb is being free-ed.
Then, tipc_link_rcv will bypassed to subcalling tipc_link_input as above
condition.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <maloy@donjonn.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ursula Braun [Thu, 7 Feb 2019 13:52:54 +0000 (14:52 +0100)]
net/smc: fix byte_order for rx_curs_confirmed
[ Upstream commit
ccc8ca9b90acb45a3309f922b2591b07b4e070ec ]
The recent change in the rx_curs_confirmed assignment disregards
byte order, which causes problems on little endian architectures.
This patch fixes it.
Fixes:
b8649efad879 ("net/smc: fix sender_free computation") (net-tree)
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jan Kara [Thu, 7 Feb 2019 10:55:39 +0000 (11:55 +0100)]
blktrace: Show requests without sector
[ Upstream commit
0803de78049fe1b0baf44bcddc727b036fb9139b ]
Currently, blktrace will not show requests that don't have any data as
rq->__sector is initialized to -1 which is out of device range and thus
discarded by act_log_check(). This is most notably the case for cache
flush requests sent to the device. Fix the problem by making
blk_rq_trace_sector() return 0 for requests without initialized sector.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ursula Braun [Mon, 4 Feb 2019 12:44:45 +0000 (13:44 +0100)]
net/smc: fix sender_free computation
[ Upstream commit
b8649efad879c69c7ab1f19ce8814fcabef1f72b ]
In some scenarios a separate consumer cursor update is necessary.
The decision is made in smc_tx_consumer_cursor_update(). The
sender_free computation could be wrong:
The rx confirmed cursor is always smaller than or equal to the
rx producer cursor. The parameters in the smc_curs_diff() call
have to be exchanged, otherwise sender_free might even be negative.
And if more data arrives local_rx_ctrl.prod might be updated, enabling
a cursor difference between local_rx_ctrl.prod and rx confirmed cursor
larger than the RMB size. This case is not covered by smc_curs_diff().
Thus function smc_curs_diff_large() is introduced here.
If a recvmsg() is processed in parallel, local_tx_ctrl.cons might
change during smc_cdc_msg_send. Make sure rx_curs_confirmed is updated
with the actually sent local_tx_ctrl.cons value.
Fixes:
e82f2e31f559 ("net/smc: optimize consumer cursor updates")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Brian Foster [Sun, 3 Feb 2019 22:03:06 +0000 (14:03 -0800)]
xfs: end sync buffer I/O properly on shutdown error
[ Upstream commit
465fa17f4a303d9fdff9eac4d45f91ece92e96ca ]
As of commit
e339dd8d8b ("xfs: use sync buffer I/O for sync delwri
queue submission"), the delwri submission code uses sync buffer I/O
for sync delwri I/O. Instead of waiting on async I/O to unlock the
buffer, it uses the underlying sync I/O completion mechanism.
If delwri buffer submission fails due to a shutdown scenario, an
error is set on the buffer and buffer completion never occurs. This
can cause xfs_buf_delwri_submit() to deadlock waiting on a
completion event.
We could check the error state before waiting on such buffers, but
that doesn't serialize against the case of an error set via a racing
I/O completion. Instead, invoke I/O completion in the shutdown case
regardless of buffer I/O type.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Fri, 1 Feb 2019 22:20:51 +0000 (14:20 -0800)]
mm/hotplug: invalid PFNs from pfn_to_online_page()
[ Upstream commit
b13bc35193d9e7a8c050a24928ca5c9e7c9a009b ]
On an arm64 ThunderX2 server, the first kmemleak scan would crash [1]
with CONFIG_DEBUG_VM_PGFLAGS=y due to page_to_nid() found a pfn that is
not directly mapped (MEMBLOCK_NOMAP). Hence, the page->flags is
uninitialized.
This is due to the commit
9f1eb38e0e11 ("mm, kmemleak: little
optimization while scanning") starts to use pfn_to_online_page() instead
of pfn_valid(). However, in the CONFIG_MEMORY_HOTPLUG=y case,
pfn_to_online_page() does not call memblock_is_map_memory() while
pfn_valid() does.
Historically, the commit
68709f45385a ("arm64: only consider memblocks
with NOMAP cleared for linear mapping") causes pages marked as nomap
being no long reassigned to the new zone in memmap_init_zone() by
calling __init_single_page().
Since the commit
2d070eab2e82 ("mm: consider zone which is not fully
populated to have holes") introduced pfn_to_online_page() and was
designed to return a valid pfn only, but it is clearly broken on arm64.
Therefore, let pfn_to_online_page() call pfn_valid_within(), so it can
handle nomap thanks to the commit
f52bb98f5ade ("arm64: mm: always
enable CONFIG_HOLES_IN_ZONE"), while it will be optimized away on
architectures where have no HOLES_IN_ZONE.
[1]
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000006
Mem abort info:
ESR = 0x96000005
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000005
CM = 0, WnR = 0
Internal error: Oops:
96000005 [#1] SMP
CPU: 60 PID: 1408 Comm: kmemleak Not tainted 5.0.0-rc2+ #8
pstate:
60400009 (nZCv daif +PAN -UAO)
pc : page_mapping+0x24/0x144
lr : __dump_page+0x34/0x3dc
sp :
ffff00003a5cfd10
x29:
ffff00003a5cfd10 x28:
000000000000802f
x27:
0000000000000000 x26:
0000000000277d00
x25:
ffff000010791f56 x24:
ffff7fe000000000
x23:
ffff000010772f8b x22:
ffff00001125f670
x21:
ffff000011311000 x20:
ffff000010772f8b
x19:
fffffffffffffffe x18:
0000000000000000
x17:
0000000000000000 x16:
0000000000000000
x15:
0000000000000000 x14:
ffff802698b19600
x13:
ffff802698b1a200 x12:
ffff802698b16f00
x11:
ffff802698b1a400 x10:
0000000000001400
x9 :
0000000000000001 x8 :
ffff00001121a000
x7 :
0000000000000000 x6 :
ffff0000102c53b8
x5 :
0000000000000000 x4 :
0000000000000003
x3 :
0000000000000100 x2 :
0000000000000000
x1 :
ffff000010772f8b x0 :
ffffffffffffffff
Process kmemleak (pid: 1408, stack limit = 0x(____ptrval____))
Call trace:
page_mapping+0x24/0x144
__dump_page+0x34/0x3dc
dump_page+0x28/0x4c
kmemleak_scan+0x4ac/0x680
kmemleak_scan_thread+0xb4/0xdc
kthread+0x12c/0x13c
ret_from_fork+0x10/0x18
Code:
d503201f f9400660 36000040 d1000413 (
f9400661)
---[ end trace
4d4bd7f573490c8e ]---
Kernel panic - not syncing: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x002,
20000c38
Memory Limit: none
---[ end Kernel panic - not syncing: Fatal exception ]---
Link: http://lkml.kernel.org/r/20190122132916.28360-1-cai@lca.pw
Fixes:
9f1eb38e0e11 ("mm, kmemleak: little optimization while scanning")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Karsten Graul [Wed, 30 Jan 2019 17:51:03 +0000 (18:51 +0100)]
net/smc: don't wait for send buffer space when data was already sent
[ Upstream commit
6889b36da78a21a312d8b462c1fa25a03c2ff192 ]
When there is no more send buffer space and at least 1 byte was already
sent then return to user space. The wait is only done when no data was
sent by the sendmsg() call.
This fixes smc_tx_sendmsg() which tried to always send all user data and
started to wait for free send buffer space when needed. During this wait
the user space program was blocked in the sendmsg() call and hence not
able to receive incoming data. When both sides were in such a situation
then the connection stalled forever.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Karsten Graul [Wed, 30 Jan 2019 17:51:02 +0000 (18:51 +0100)]
net/smc: prevent races between smc_lgr_terminate() and smc_conn_free()
[ Upstream commit
77f838ace755d2f466536c44dac6c856f62cd901 ]
To prevent races between smc_lgr_terminate() and smc_conn_free() add an
extra check of the lgr field before accessing it, and cancel a delayed
free_work when a new smc connection is created.
This fixes the problem that free_work cleared the lgr variable but
smc_lgr_terminate() or smc_conn_free() still access it in parallel.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Sat, 26 Jan 2019 20:12:19 +0000 (21:12 +0100)]
decnet: fix DN_IFREQ_SIZE
[ Upstream commit
50c2936634bcb1db78a8ca63249236810c11a80f ]
Digging through the ioctls with Al because of the previous
patches, we found that on 64-bit decnet's dn_dev_ioctl()
is wrong, because struct ifreq::ifr_ifru is actually 24
bytes (not 16 as expected from struct sockaddr) due to the
ifru_map and ifru_settings members.
Clearly, decnet expects the ioctl to be called with a struct
like
struct ifreq_dn {
char ifr_name[IFNAMSIZ];
struct sockaddr_dn ifr_addr;
};
since it does
struct ifreq *ifr = ...;
struct sockaddr_dn *sdn = (struct sockaddr_dn *)&ifr->ifr_addr;
This means that DN_IFREQ_SIZE is too big for what it wants on
64-bit, as it is
sizeof(struct ifreq) - sizeof(struct sockaddr) +
sizeof(struct sockaddr_dn)
This assumes that sizeof(struct sockaddr) is the size of ifr_ifru
but that isn't true.
Fix this to use offsetof(struct ifreq, ifr_ifru).
This indeed doesn't really matter much - the result is that we
copy in/out 8 bytes more than we should on 64-bit platforms. In
case the "struct ifreq_dn" lands just on the end of a page though
it might lead to faults.
As far as I can tell, it has been like this forever, so it seems
very likely that nobody cares.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wenxu [Sat, 19 Jan 2019 05:11:25 +0000 (13:11 +0800)]
ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel
[ Upstream commit
d71b57532d70c03f4671dd04e84157ac6bf021b0 ]
ip l add dev tun type gretap key 1000
ip a a dev tun 10.0.0.1/24
Packets with tun-id 1000 can be recived by tun dev. But packet can't
be sent through dev tun for non-tunnel-dst
With this patch: tunnel-dst can be get through lwtunnel like beflow:
ip r a 10.0.0.7 encap ip dst 172.168.0.11 dev tun
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Edward Cree [Tue, 22 Jan 2019 19:02:17 +0000 (19:02 +0000)]
sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe
[ Upstream commit
3366463513f544c12c6b88c13da4462ee9e7a1a1 ]
Use a bitmap to keep track of which partition types we've already seen;
for duplicates, return -EEXIST from efx_ef10_mtd_probe_partition() and
thus skip adding that partition.
Duplicate partitions occur because of the A/B backup scheme used by newer
sfc NICs. Prior to this patch they cause sysfs_warn_dup errors because
they have the same name, causing us not to expose any MTDs at all.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lucas Stach [Tue, 18 Dec 2018 15:46:29 +0000 (16:46 +0100)]
gpu: ipu-v3: pre: don't trigger update if buffer address doesn't change
[ Upstream commit
eb0200a4357da100064971689d3a0e9e3cf57f33 ]
On a NOP double buffer update where current buffer address is the same
as the next buffer address, the SDW_UPDATE bit clears too late. As we
are now using this bit to determine when it is safe to signal flip
completion to userspace this will delay completion of atomic commits
where one plane doesn't change the buffer by a whole frame period.
Fix this by remembering the last buffer address and just skip the
double buffer update if it would not change the buffer address.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[p.zabel@pengutronix.de: initialize last_bufaddr in ipu_pre_configure]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
He Zhe [Thu, 17 Jan 2019 09:00:19 +0000 (17:00 +0800)]
serial: 8250: Fix serial8250 initialization crash
[ Upstream commit
352c4cf40c4a7d439fa5d30aa2160f54b394da82 ]
The initialization code of interrupt backoff work might reference NULL
pointer and cause the following crash, if no port was found.
[ 10.017727] CPU 0 Unable to handle kernel paging request at virtual address
000001b0, epc ==
807088e0, ra ==
8070863c
---- snip ----
[ 11.704470] [<
807088e0>] serial8250_register_8250_port+0x318/0x4ac
[ 11.747251] [<
80708d74>] serial8250_probe+0x148/0x1c0
[ 11.789301] [<
80728450>] platform_drv_probe+0x40/0x94
[ 11.830515] [<
807264f8>] really_probe+0xf8/0x318
[ 11.870876] [<
80726b7c>] __driver_attach+0x110/0x12c
[ 11.910960] [<
80724374>] bus_for_each_dev+0x78/0xcc
[ 11.951134] [<
80725958>] bus_add_driver+0x200/0x234
[ 11.989756] [<
807273d8>] driver_register+0x84/0x148
[ 12.029832] [<
80d72f84>] serial8250_init+0x138/0x198
[ 12.070447] [<
80100e6c>] do_one_initcall+0x5c/0x2a0
[ 12.110104] [<
80d3a208>] kernel_init_freeable+0x370/0x484
[ 12.150722] [<
80a49420>] kernel_init+0x10/0xf8
[ 12.191517] [<
8010756c>] ret_from_kernel_thread+0x14/0x1c
This patch makes sure the initialization code can be reached only if a port
is found.
Fixes:
6d7f677a2afa ("serial: 8250: Rate limit serial port rx interrupts during input overruns")
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Darwin Dingel <darwin.dingel@alliedtelesis.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konstantin Khlebnikov [Mon, 14 Jan 2019 10:38:43 +0000 (13:38 +0300)]
net/core/neighbour: fix kmemleak minimal reference count for hash tables
[ Upstream commit
01b833ab44c9e484060aad72267fc7e71beb559b ]
This should be 1 for normal allocations, 0 disables leak reporting.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Fixes:
85704cb8dcfd ("net/core/neighbour: tell kmemleak about hash tables")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ming Lei [Tue, 15 Jan 2019 23:31:29 +0000 (17:31 -0600)]
PCI/MSI: Return -ENOSPC from pci_alloc_irq_vectors_affinity()
[ Upstream commit
77f88abd4a6f73a1a68dbdc0e3f21575fd508fc3 ]
The API of pci_alloc_irq_vectors_affinity() says it returns -ENOSPC if
fewer than @min_vecs interrupt vectors are available for @dev.
However, if a device supports MSI-X but not MSI and a caller requests
@min_vecs that can't be satisfied by MSI-X, we previously returned -EINVAL
(from the failed attempt to enable MSI), not -ENOSPC.
When -ENOSPC is returned, callers may reduce the number IRQs they request
and try again. Most callers can use the @min_vecs and @max_vecs
parameters to avoid this retry loop, but that doesn't work when using IRQ
affinity "nr_sets" because rebalancing the sets is driver-specific.
This return value bug has been present since pci_alloc_irq_vectors() was
added in v4.10 by
aff171641d18 ("PCI: Provide sensible IRQ vector
alloc/free routines"), but it wasn't an issue because @min_vecs/@max_vecs
removed the need for callers to iteratively reduce the number of IRQs
requested and retry the allocation, so they didn't need to distinguish
-ENOSPC from -EINVAL.
In v5.0,
6da4b3ab9a6e ("genirq/affinity: Add support for allocating
interrupt sets") added IRQ sets to the interface, which reintroduced the
need to check for -ENOSPC and possibly reduce the number of IRQs requested
and retry the allocation.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miquel Raynal [Tue, 4 Dec 2018 19:28:27 +0000 (20:28 +0100)]
ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs
[ Upstream commit
96dbcb40e4b1a387cdb9b21f43638c759aebb5a4 ]
At the beginning, only Armada 38x SoCs where supported by the
ahci_mvebu.c driver. Commit
15d3ce7b63bd ("ata: ahci_mvebu: add
support for Armada 3700 variant") introduced Armada 3700 support. As
opposed to Armada 38x SoCs, the 3700 variants do not have to configure
mbus and the regret option. This patch took care of avoiding such
configuration when not needed in the probe function, but failed to do
the same in the resume path. While doing so looks harmless by
experience, let's clean the driver logic and avoid doing this useless
configuration with Armada 3700 SoCs.
Because the logic is very similar between these two places, it has
been decided to factorize this code and put it in a "Armada 38x
configuration function". This function is part of a new
(per-compatible) platform data structure, so that the addition of such
configuration function for Armada 3700 will be eased.
Fixes:
15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konstantin Khlebnikov [Tue, 8 Jan 2019 09:30:00 +0000 (12:30 +0300)]
net/core/neighbour: tell kmemleak about hash tables
[ Upstream commit
85704cb8dcfd88d351bfc87faaeba1c8214f3177 ]
This fixes false-positive kmemleak reports about leaked neighbour entries:
unreferenced object 0xffff8885c6e4d0a8 (size 1024):
comm "softirq", pid 0, jiffies
4294922664 (age 167640.804s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 20 2c f3 83 ff ff ff ff ........ ,......
08 c0 ef 5f 84 88 ff ff 01 8c 7d 02 01 00 00 00 ..._......}.....
backtrace:
[<
00000000748509fe>] ip6_finish_output2+0x887/0x1e40
[<
0000000036d7a0d8>] ip6_output+0x1ba/0x600
[<
0000000027ea7dba>] ip6_send_skb+0x92/0x2f0
[<
00000000d6e2111d>] udp_v6_send_skb.isra.24+0x680/0x15e0
[<
000000000668a8be>] udpv6_sendmsg+0x18c9/0x27a0
[<
000000004bd5fa90>] sock_sendmsg+0xb3/0xf0
[<
000000008227b29f>] ___sys_sendmsg+0x745/0x8f0
[<
000000008698009d>] __sys_sendmsg+0xde/0x170
[<
00000000889dacf1>] do_syscall_64+0x9b/0x400
[<
0000000081cdb353>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<
000000005767ed39>] 0xffffffffffffffff
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gustavo A. R. Silva [Sat, 5 Jan 2019 16:52:23 +0000 (10:52 -0600)]
tipc: fix memory leak in tipc_nl_compat_publ_dump
[ Upstream commit
f87d8ad9233f115db92c6c087d58403b0009ed36 ]
There is a memory leak in case genlmsg_put fails.
Fix this by freeing *args* before return.
Addresses-Coverity-ID:
1476406 ("Resource leak")
Fixes:
46273cf7e009 ("tipc: fix a missing check of genlmsg_put")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Boris Brezillon [Wed, 2 Jan 2019 14:36:54 +0000 (15:36 +0100)]
mtd: Check add_mtd_device() ret code
[ Upstream commit
2b6f0090a3335b7bdd03ca520c35591159463041 ]
add_mtd_device() can fail. We should always check its return value
and gracefully handle the failure case. Fix the call sites where this
not done (in mtdpart.c) and add a __must_check attribute to the
prototype to avoid this kind of mistakes.
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Olof Johansson [Sat, 5 Jan 2019 21:21:18 +0000 (13:21 -0800)]
lib/genalloc.c: include vmalloc.h
[ Upstream commit
35004f2e55807a1a1491db24ab512dd2f770a130 ]
Fixes build break on most ARM/ARM64 defconfigs:
lib/genalloc.c: In function 'gen_pool_add_virt':
lib/genalloc.c:190:10: error: implicit declaration of function 'vzalloc_node'; did you mean 'kzalloc_node'?
lib/genalloc.c:190:8: warning: assignment to 'struct gen_pool_chunk *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
lib/genalloc.c: In function 'gen_pool_destroy':
lib/genalloc.c:254:3: error: implicit declaration of function 'vfree'; did you mean 'kfree'?
Fixes:
6862d2fc8185 ('lib/genalloc.c: use vzalloc_node() to allocate the bitmap')
Cc: Huang Shijie <sjhuang@iluvatar.ai>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Skidanov <alexey.skidanov@intel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Thu, 3 Jan 2019 23:29:05 +0000 (15:29 -0800)]
drivers/base/platform.c: kmemleak ignore a known leak
[ Upstream commit
967d3010df8b6f6f9aa95c198edc5fe3646ebf36 ]
unreferenced object 0xffff808ec6dc5a80 (size 128):
comm "swapper/0", pid 1, jiffies
4294938063 (age 2560.530s)
hex dump (first 32 bytes):
ff ff ff ff 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b ........kkkkkkkk
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
backtrace:
[<
00000000476dcf8c>] kmem_cache_alloc_trace+0x430/0x500
[<
000000004f708d37>] platform_device_register_full+0xbc/0x1e8
[<
000000006c2a7ec7>] acpi_create_platform_device+0x370/0x450
[<
00000000ef135642>] acpi_default_enumeration+0x34/0x78
[<
000000003bd9a052>] acpi_bus_attach+0x2dc/0x3e0
[<
000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0
[<
000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0
[<
000000002968643e>] acpi_bus_scan+0xb0/0x110
[<
0000000010dd0bd7>] acpi_scan_init+0x1a8/0x410
[<
00000000965b3c5a>] acpi_init+0x408/0x49c
[<
00000000ed4b9fe2>] do_one_initcall+0x178/0x7f4
[<
00000000a5ac5a74>] kernel_init_freeable+0x9d4/0xa9c
[<
0000000070ea6c15>] kernel_init+0x18/0x138
[<
00000000fb8fff06>] ret_from_fork+0x10/0x1c
[<
0000000041273a0d>] 0xffffffffffffffff
Then, faddr2line pointed out this line,
/*
* This memory isn't freed when the device is put,
* I don't have a nice idea for that though. Conceptually
* dma_mask in struct device should not be a pointer.
* See http://thread.gmane.org/gmane.linux.kernel.pci/9081
*/
pdev->dev.dma_mask =
kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
Since this leak has existed for more than 8 years and it does not
reference other parts of the memory, let kmemleak ignore it, so users
don't need to waste time reporting this in the future.
Link: http://lkml.kernel.org/r/20181206160751.36211-1-cai@gmx.us
Signed-off-by: Qian Cai <cai@gmx.us>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yi Wang [Thu, 3 Jan 2019 23:28:03 +0000 (15:28 -0800)]
fork: fix some -Wmissing-prototypes warnings
[ Upstream commit
fb5bf31722d0805a3f394f7d59f2e8cd07acccb7 ]
We get a warning when building kernel with W=1:
kernel/fork.c:167:13: warning: no previous prototype for `arch_release_thread_stack' [-Wmissing-prototypes]
kernel/fork.c:779:13: warning: no previous prototype for `fork_init' [-Wmissing-prototypes]
Add the missing declaration in head file to fix this.
Also, remove arch_release_thread_stack() completely because no arch
seems to implement it since
bb9d81264 (arch: remove tile port).
Link: http://lkml.kernel.org/r/1542170087-23645-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Huang Shijie [Thu, 3 Jan 2019 23:26:51 +0000 (15:26 -0800)]
lib/genalloc.c: use vzalloc_node() to allocate the bitmap
[ Upstream commit
6862d2fc81859f88c1f3f660886427893f2b4f3f ]
Some devices may have big memory on chip, such as over 1G. In some
cases, the nbytes maybe bigger then 4M which is the bounday of the
memory buddy system (4K default).
So use vzalloc_node() to allocate the bitmap. Also use vfree to free
it.
Link: http://lkml.kernel.org/r/20181225015701.6289-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Skidanov <alexey.skidanov@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexey Skidanov [Thu, 3 Jan 2019 23:26:44 +0000 (15:26 -0800)]
lib/genalloc.c: fix allocation of aligned buffer from non-aligned chunk
[ Upstream commit
52fbf1134d479234d7e64ba9dcbaea23405f229e ]
gen_pool_alloc_algo() uses different allocation functions implementing
different allocation algorithms. With gen_pool_first_fit_align()
allocation function, the returned address should be aligned on the
requested boundary.
If chunk start address isn't aligned on the requested boundary, the
returned address isn't aligned too. The only way to get properly
aligned address is to initialize the pool with chunks aligned on the
requested boundary. If want to have an ability to allocate buffers
aligned on different boundaries (for example, 4K, 1MB, ...), the chunk
start address should be aligned on the max possible alignment.
This happens because gen_pool_first_fit_align() looks for properly
aligned memory block without taking into account the chunk start address
alignment.
To fix this, we provide chunk start address to
gen_pool_first_fit_align() and change its implementation such that it
starts looking for properly aligned block with appropriate offset
(exactly as is done in CMA).
Link: https://lkml.kernel.org/lkml/a170cf65-6884-3592-1de9-4c235888cc8a@intel.com
Link: http://lkml.kernel.org/r/1541690953-4623-1-git-send-email-alexey.skidanov@intel.com
Signed-off-by: Alexey Skidanov <alexey.skidanov@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Morse [Fri, 21 Dec 2018 19:25:19 +0000 (19:25 +0000)]
firmware: arm_sdei: Fix DT platform device creation
[ Upstream commit
acafce48b07bf5f9994a38e7fe237193d43d092e ]
It turns out the dt-probing part of this wasn't tested properly after it
was merged. commit
3aa0582fdb82 ("of: platform: populate /firmware/ node
from of_platform_default_populate_init()") changed the core-code to
generate the platform devices, meaning the driver's attempt fails, and it
bails out.
Fix this by removing the manual platform-device creation for DT systems,
core code has always done this for us.
CC: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicolas Saenz Julienne [Fri, 21 Dec 2018 19:25:18 +0000 (19:25 +0000)]
firmware: arm_sdei: fix wrong of_node_put() in init function
[ Upstream commit
c3790b3799f8d75d93d26f6fd7bb569fc8c8b0cb ]
After finding a "firmware" dt node arm_sdei tries to match it's
compatible string with it. To do so it's calling of_find_matching_node()
which already takes care of decreasing the refcount on the "firmware"
node. We are then incorrectly decreasing the refcount on that node
again.
This patch removes the unwarranted call to of_node_put().
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aditya Pakki [Mon, 24 Dec 2018 18:24:45 +0000 (12:24 -0600)]
infiniband/qedr: Potential null ptr dereference of qp
[ Upstream commit
9c6260de505b63638dd86fcc33849b17f6146d94 ]
idr_find() may fail and return a NULL pointer. The fix checks the return
value of the function and returns an error in case of NULL.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aditya Pakki [Wed, 26 Dec 2018 18:56:22 +0000 (12:56 -0600)]
infiniband: bnxt_re: qplib: Check the return value of send_message
[ Upstream commit
94edd87a1c59f3efa6fdf4e98d6d492e6cec6173 ]
In bnxt_qplib_map_tc2cos(), bnxt_qplib_rcfw_send_message() can return an
error value but it is lost. Propagate this error to the callers.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuck Lever [Fri, 7 Dec 2018 16:11:44 +0000 (11:11 -0500)]
xprtrdma: Prevent leak of rpcrdma_rep objects
[ Upstream commit
07e10308ee5da8e6132e0b737ece1c99dd651fb6 ]
If a reply has been processed but the RPC is later retransmitted
anyway, the req->rl_reply field still contains the only pointer to
the old rpcrdma rep. When the next reply comes in, the reply handler
will stomp on the rl_reply field, leaking the old rep.
A trace event is added to capture such leaks.
This problem seems to be worsened by the restructuring of the RPC
Call path in v4.20. Fully addressing this issue will require at
least a re-architecture of the disconnect logic, which is not
appropriate during -rc.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Fri, 21 Dec 2018 06:46:23 +0000 (00:46 -0600)]
netfilter: nf_tables: fix a missing check of nla_put_failure
[ Upstream commit
eb8950861c1bfd3eecc8f6faad213e3bca0dc395 ]
If nla_nest_start() may fail. The fix checks its return value and goes
to nla_put_failure if it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anthony Yznaga [Fri, 28 Dec 2018 08:37:27 +0000 (00:37 -0800)]
tools/vm/page-types.c: fix "kpagecount returned fewer pages than expected" failures
[ Upstream commit
b6fb87b8e3ff1ef6bcf68470f24a97c984554d5a ]
Because kpagecount_read() fakes success if map counts are not being
collected, clamp the page count passed to it by walk_pfn() to the pages
value returned by the preceding call to kpageflags_read().
Link: http://lkml.kernel.org/r/1543962269-26116-1-git-send-email-anthony.yznaga@oracle.com
Fixes:
7f1d23e60718 ("tools/vm/page-types.c: include shared map counts")
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wentao Wang [Fri, 28 Dec 2018 08:35:26 +0000 (00:35 -0800)]
mm/page_alloc.c: deduplicate __memblock_free_early() and memblock_free()
[ Upstream commit
d31cfe7bff9109476da92c245b56083e9b48d60a ]
Link: http://lkml.kernel.org/r/C8ECE1B7A767434691FEEFA3A01765D72AFB8E78@MX203CL03.corp.emc.com
Signed-off-by: Wentao Wang <witallwang@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aaron Lu [Fri, 28 Dec 2018 08:35:22 +0000 (00:35 -0800)]
mm/page_alloc.c: use a single function to free page
[ Upstream commit
742aa7fb52c56fb3b307e704f93e67b698959cc2 ]
There are multiple places of freeing a page, they all do the same things
so a common function can be used to reduce code duplicate.
It also avoids bug fixed in one function but left in another.
Link: http://lkml.kernel.org/r/20181119134834.17765-3-aaron.lu@intel.com
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pankaj gupta <pagupta@redhat.com>
Cc: Pawel Staszewski <pstaszewski@itcare.pl>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aaron Lu [Fri, 28 Dec 2018 08:35:18 +0000 (00:35 -0800)]
mm/page_alloc.c: free order-0 pages through PCP in page_frag_free()
[ Upstream commit
65895b67ad27df0f62bfaf82dd5622f95ea29196 ]
page_frag_free() calls __free_pages_ok() to free the page back to Buddy.
This is OK for high order page, but for order-0 pages, it misses the
optimization opportunity of using Per-Cpu-Pages and can cause zone lock
contention when called frequently.
Pawel Staszewski recently shared his result of 'how Linux kernel handles
normal traffic'[1] and from perf data, Jesper Dangaard Brouer found the
lock contention comes from page allocator:
mlx5e_poll_tx_cq
|
--16.34%--napi_consume_skb
|
|--12.65%--__free_pages_ok
| |
| --11.86%--free_one_page
| |
| |--10.10%--queued_spin_lock_slowpath
| |
| --0.65%--_raw_spin_lock
|
|--1.55%--page_frag_free
|
--1.44%--skb_release_data
Jesper explained how it happened: mlx5 driver RX-page recycle mechanism is
not effective in this workload and pages have to go through the page
allocator. The lock contention happens during mlx5 DMA TX completion
cycle. And the page allocator cannot keep up at these speeds.[2]
I thought that __free_pages_ok() are mostly freeing high order pages and
thought this is an lock contention for high order pages but Jesper
explained in detail that __free_pages_ok() here are actually freeing
order-0 pages because mlx5 is using order-0 pages to satisfy its page pool
allocation request.[3]
The free path as pointed out by Jesper is:
skb_free_head()
-> skb_free_frag()
-> page_frag_free()
And the pages being freed on this path are order-0 pages.
Fix this by doing similar things as in __page_frag_cache_drain() - send
the being freed page to PCP if it's an order-0 page, or directly to Buddy
if it is a high order page.
With this change, Paweł hasn't noticed lock contention yet in his
workload and Jesper has noticed a 7% performance improvement using a micro
benchmark and lock contention is gone. Ilias' test on a 'low' speed 1Gbit
interface on an cortex-a53 shows ~11% performance boost testing with
64byte packets and __free_pages_ok() disappeared from perf top.
[1]: https://www.spinics.net/lists/netdev/msg531362.html
[2]: https://www.spinics.net/lists/netdev/msg531421.html
[3]: https://www.spinics.net/lists/netdev/msg531556.html
[akpm@linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/20181120014544.GB10657@intel.com
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Reported-by: Pawel Staszewski <pstaszewski@itcare.pl>
Analysed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Pankaj gupta <pagupta@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Yang [Fri, 28 Dec 2018 08:34:36 +0000 (00:34 -0800)]
vmscan: return NODE_RECLAIM_NOSCAN in node_reclaim() when CONFIG_NUMA is n
[ Upstream commit
8b09549c2bfd9f3f8f4cdad74107ef4f4ff9cdd7 ]
Commit
fa5e084e43eb ("vmscan: do not unconditionally treat zones that
fail zone_reclaim() as full") changed the return value of
node_reclaim(). The original return value 0 means NODE_RECLAIM_SOME
after this commit.
While the return value of node_reclaim() when CONFIG_NUMA is n is not
changed. This will leads to call zone_watermark_ok() again.
This patch fixes the return value by adjusting to NODE_RECLAIM_NOSCAN.
Since node_reclaim() is only called in page_alloc.c, move it to
mm/internal.h.
Link: http://lkml.kernel.org/r/20181113080436.22078-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Junxiao Bi [Fri, 28 Dec 2018 08:32:53 +0000 (00:32 -0800)]
ocfs2: clear journal dirty flag after shutdown journal
[ Upstream commit
d85400af790dba2aa294f0a77e712f166681f977 ]
Dirty flag of the journal should be cleared at the last stage of umount,
if do it before jbd2_journal_destroy(), then some metadata in uncommitted
transaction could be lost due to io error, but as dirty flag of journal
was already cleared, we can't find that until run a full fsck. This may
cause system panic or other corruption.
Link: http://lkml.kernel.org/r/20181121020023.3034-3-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@versity.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Wed, 26 Dec 2018 08:28:30 +0000 (16:28 +0800)]
net/wan/fsl_ucc_hdlc: Avoid double free in ucc_hdlc_probe()
[ Upstream commit
40752b3eae29f8ca2378e978a02bd6dbeeb06d16 ]
This patch fixes potential double frees if register_hdlc_device() fails.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Peng Hao <peng.hao2@zte.com.cn>
CC: Zhao Qiang <qiang.zhao@nxp.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Wed, 26 Dec 2018 06:31:08 +0000 (00:31 -0600)]
net: marvell: fix a missing check of acpi_match_device
[ Upstream commit
92ee77d148bf06d8c52664be4d1b862583fd5c0e ]
When acpi_match_device fails, its return value is NULL. Directly using
the return value without a check may result in a NULL-pointer
dereference. The fix checks if acpi_match_device fails, and if so,
returns -EINVAL.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Wed, 26 Dec 2018 06:09:04 +0000 (00:09 -0600)]
tipc: fix a missing check of genlmsg_put
[ Upstream commit
46273cf7e009231d2b6bc10a926e82b8928a9fb2 ]
genlmsg_put could fail. The fix inserts a check of its return value, and
if it fails, returns -EMSGSIZE.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Wed, 26 Dec 2018 04:23:19 +0000 (22:23 -0600)]
atl1e: checking the status of atl1e_write_phy_reg
[ Upstream commit
ff07d48d7bc0974d4f96a85a4df14564fb09f1ef ]
atl1e_write_phy_reg() could fail. The fix issues an error message when
it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Wed, 26 Dec 2018 04:08:18 +0000 (22:08 -0600)]
net: dsa: bcm_sf2: Propagate error value from mdio_write
[ Upstream commit
e49505f7255be8ced695919c08a29bf2c3d79616 ]
Both bcm_sf2_sw_indir_rw and mdiobus_write_nested could fail, so let's
return their error codes upstream.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Wed, 26 Dec 2018 02:57:14 +0000 (20:57 -0600)]
net: stmicro: fix a missing check of clk_prepare
[ Upstream commit
f86a3b83833e7cfe558ca4d70b64ebc48903efec ]
clk_prepare() could fail, so let's check its status, and if it fails,
return its error code upstream.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Wed, 26 Dec 2018 02:55:37 +0000 (20:55 -0600)]
net: (cpts) fix a missing check of clk_prepare
[ Upstream commit
2d822f2dbab7f4c820f72eb8570aacf3f35855bd ]
clk_prepare() could fail, so let's check its status, and if it fails,
return its error code upstream.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Weinberger [Tue, 30 Oct 2018 11:58:12 +0000 (12:58 +0100)]
um: Make GCOV depend on !KCOV
[ Upstream commit
550ed0e2036663b35cec12374b835444f9c60454 ]
Both do more or less the same thing and are mutually exclusive.
If both are enabled the build will fail.
Sooner or later we can kill UML's GCOV.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Weinberger [Tue, 30 Oct 2018 11:58:11 +0000 (12:58 +0100)]
um: Include sys/uio.h to have writev()
[ Upstream commit
0053102a869f1b909904b1b85ac282e2744deaab ]
sys/uio.h gives us writev(), otherwise the build might fail on
some systems.
Fixes:
49da7e64f33e ("High Performance UML Vector Network Driver")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Tue, 18 Dec 2018 11:20:17 +0000 (19:20 +0800)]
f2fs: fix to dirty inode synchronously
[ Upstream commit
b32e019049e959ee10ec359893c9dd5d057dad55 ]
If user change inode's i_flags via ioctl, let's add it into global
dirty list, so that checkpoint can guarantee its persistence before
fsync, it can make checkpoint keeping strong consistency.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qiuyang Sun [Tue, 18 Dec 2018 09:32:23 +0000 (17:32 +0800)]
f2fs: fix block address for __check_sit_bitmap
[ Upstream commit
9249dded7b5cb539a8c8698b25d08a3c15261470 ]
Should use lstart (logical start address) instead of start (in dev) here.
This fixes a bug in multi-device scenarios.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aditya Pakki [Mon, 24 Dec 2018 01:42:38 +0000 (19:42 -0600)]
net/net_namespace: Check the return value of register_pernet_subsys()
[ Upstream commit
0eb987c874dc93f9c9d85a6465dbde20fdd3884c ]
In net_ns_init(), register_pernet_subsys() could fail while registering
network namespace subsystems. The fix checks the return value and
sends a panic() on failure.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aditya Pakki [Mon, 24 Dec 2018 00:54:53 +0000 (18:54 -0600)]
net/netlink_compat: Fix a missing check of nla_parse_nested
[ Upstream commit
89dfd0083751d00d5d7ead36f6d8b045bf89c5e1 ]
In tipc_nl_compat_sk_dump(), if nla_parse_nested() fails, it could return
an error. To be consistent with other invocations of the function call,
on error, the fix passes the return value upstream.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Shiyan [Wed, 19 Dec 2018 10:39:24 +0000 (13:39 +0300)]
pwm: clps711x: Fix period calculation
[ Upstream commit
b0f17570b8203c22f139459c86cfbaa0311313ed ]
Commit
e39c0df1be5a ("pwm: Introduce the pwm_args concept") has
changed the variable for the period for clps711x-pwm driver, so now
pwm_get/set_period() works with pwm->state.period variable instead
of pwm->args.period.
This patch changes the period variable in other places where it is used.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Thu, 13 Dec 2018 09:52:32 +0000 (07:52 -0200)]
crypto: mxc-scc - fix build warnings on ARM64
[ Upstream commit
2326828ee40357b3d2b1359b8ca7526af201495b ]
The following build warnings are seen when building for ARM64 allmodconfig:
drivers/crypto/mxc-scc.c:181:20: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' {aka 'long unsigned int'} [-Wformat=]
drivers/crypto/mxc-scc.c:186:21: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=]
drivers/crypto/mxc-scc.c:277:21: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Wformat=]
drivers/crypto/mxc-scc.c:339:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
drivers/crypto/mxc-scc.c:340:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Fix them by using the %zu specifier to print a size_t variable and using
a plain %x to print the result of a readl().
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benjamin Herrenschmidt [Mon, 8 Oct 2018 04:08:31 +0000 (15:08 +1100)]
powerpc: Fix HMIs on big-endian with CONFIG_RELOCATABLE=y
[ Upstream commit
505a314fb28ce122091691c51426fa85c084e115 ]
HMIs will crash the kernel due to
BRANCH_LINK_TO_FAR(hmi_exception_realmode)
Calling into the OPD instead of the actual code.
Fixes:
2337d207288f ("powerpc/64: CONFIG_RELOCATABLE support for hmi interrupts")
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Use DOTSYM() rather than #ifdef]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Tue, 27 Nov 2018 08:16:44 +0000 (19:16 +1100)]
powerpc/pseries: Fix node leak in update_lmb_associativity_index()
[ Upstream commit
47918bc68b7427e961035949cc1501a864578a69 ]
In update_lmb_associativity_index() we lookup dr_node using
of_find_node_by_path() which takes a reference for us. In the
non-error case we forget to drop the reference. Note that
find_aa_index() does modify properties of the node, but doesn't need
an extra reference held once it's returned.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Mon, 10 Dec 2018 11:41:29 +0000 (11:41 +0000)]
powerpc/83xx: handle machine check caused by watchdog timer
[ Upstream commit
0deae39cec6dab3a66794f3e9e83ca4dc30080f1 ]
When the watchdog timer is set in interrupt mode, it causes a
machine check when it times out. The purpose of this mode is to
ease debugging, not to crash the kernel and reboot the machine.
This patch implements a special handling for that, in order to not
crash the kernel if the watchdog times out while in interrupt or
within the idle task.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[scottwood: added missing #include]
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Fri, 21 Dec 2018 06:29:19 +0000 (00:29 -0600)]
regulator: tps65910: fix a missing check of return value
[ Upstream commit
cd07e3701fa6a4c68f8493ee1d12caa18d46ec6a ]
tps65910_reg_set_bits() may fail. The fix checks if it fails, and if so,
returns with its error code.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jesper Dangaard Brouer [Wed, 19 Dec 2018 16:00:23 +0000 (17:00 +0100)]
bpf/cpumap: make sure frame_size for build_skb is aligned if headroom isn't
[ Upstream commit
77ea5f4cbe2084db9ab021ba73fb7eadf1610884 ]
The frame_size passed to build_skb must be aligned, else it is
possible that the embedded struct skb_shared_info gets unaligned.
For correctness make sure that xdpf->headroom in included in the
alignment. No upstream drivers can hit this, as all XDP drivers provide
an aligned headroom. This was discovered when playing with implementing
XDP support for mvneta, which have a 2 bytes DSA header, and this
Marvell ARM64 platform didn't like doing atomic operations on an
unaligned skb_shinfo(skb)->dataref addresses.
Fixes:
1c601d829ab0 ("bpf: cpumap xdp_buff to skb conversion and allocation")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Parav Pandit [Fri, 14 Dec 2018 06:32:42 +0000 (00:32 -0600)]
IB/rxe: Make counters thread safe
[ Upstream commit
d5108e69fe013ff47ab815b849caba9cc33ca1e5 ]
Current rxe device counters are not thread safe.
When multiple QPs are used, they can be racy.
Make them thread safe by making it atomic64.
Fixes:
0b1e5b99a48b ("IB/rxe: Add port protocol stats")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luc Van Oostenryck [Thu, 20 Dec 2018 16:23:39 +0000 (17:23 +0100)]
drbd: fix print_st_err()'s prototype to match the definition
[ Upstream commit
2c38f035117331eb78d0504843c79ea7c7fabf37 ]
print_st_err() is defined with its 4th argument taking an
'enum drbd_state_rv' but its prototype use an int for it.
Fix this by using 'enum drbd_state_rv' in the prototype too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lars Ellenberg [Thu, 20 Dec 2018 16:23:37 +0000 (17:23 +0100)]
drbd: do not block when adjusting "disk-options" while IO is frozen
[ Upstream commit
f708bd08ecbdc23d03aaedf5b3311ebe44cfdb50 ]
"suspending" IO is overloaded.
It can mean "do not allow new requests" (obviously),
but it also may mean "must not complete pending IO",
for example while the fencing handlers do their arbitration.
When adjusting disk options, we suspend io (disallow new requests), then
wait for the activity-log to become unused (drain all IO completions),
and possibly replace it with a new activity log of different size.
If the other "suspend IO" aspect is active, pending IO completions won't
happen, and we would block forever (unkillable drbdsetup process).
Fix this by skipping the activity log adjustment if the "al-extents"
setting did not change. Also, in case it did change, fail early without
blocking if it looks like we would block forever.
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lars Ellenberg [Thu, 20 Dec 2018 16:23:35 +0000 (17:23 +0100)]
drbd: reject attach of unsuitable uuids even if connected
[ Upstream commit
fe43ed97bba3b11521abd934b83ed93143470e4f ]
Multiple failure scenario:
a) all good
Connected Primary/Secondary UpToDate/UpToDate
b) lose disk on Primary,
Connected Primary/Secondary Diskless/UpToDate
c) continue to write to the device,
changes only make it to the Secondary storage.
d) lose disk on Secondary,
Connected Primary/Secondary Diskless/Diskless
e) now try to re-attach on Primary
This would have succeeded before, even though that is clearly the
wrong data set to attach to (missing the modifications from c).
Because we only compared our "effective" and the "to-be-attached"
data generation uuid tags if (device->state.conn < C_CONNECTED).
Fix: change that constraint to (device->state.pdsk != D_UP_TO_DATE)
compare the uuids, and reject the attach.
This patch also tries to improve the reverse scenario:
first lose Secondary, then Primary disk,
then try to attach the disk on Secondary.
Before this patch, the attach on the Secondary succeeds, but since commit
drbd: disconnect, if the wrong UUIDs are attached on a connected peer
the Primary will notice unsuitable data, and drop the connection hard.
Though unfortunately at a point in time during the handshake where
we cannot easily abort the attach on the peer without more
refactoring of the handshake.
We now reject any attach to "unsuitable" uuids,
as long as we can see a Primary role,
unless we already have access to "good" data.
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lars Ellenberg [Thu, 20 Dec 2018 16:23:31 +0000 (17:23 +0100)]
drbd: ignore "all zero" peer volume sizes in handshake
[ Upstream commit
94c43a13b8d6e3e0dd77b3536b5e04a84936b762 ]
During handshake, if we are diskless ourselves, we used to accept any size
presented by the peer.
Which could be zero if that peer was just brought up and connected
to us without having a disk attached first, in which case both
peers would just "flip" their volume sizes.
Now, even a diskless node will ignore "zero" sizes
presented by a diskless peer.
Also a currently Diskless Primary will refuse to shrink during handshake:
it may be frozen, and waiting for a "suitable" local disk or peer to
re-appear (on-no-data-accessible suspend-io). If the peer is smaller
than what we used to be, it is not suitable.
The logic for a diskless node during handshake is now supposed to be:
believe the peer, if
- I don't have a current size myself
- we agree on the size anyways
- I do have a current size, am Secondary, and he has the only disk
- I do have a current size, am Primary, and he has the only disk,
which is larger than my current size
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexey Kardashevskiy [Mon, 19 Nov 2018 04:25:17 +0000 (15:25 +1100)]
powerpc/powernv/eeh/npu: Fix uninitialized variables in opal_pci_eeh_freeze_status
[ Upstream commit
c20577014f85f36d4e137d3d52a1f61225b4a3d2 ]
The current implementation of the OPAL_PCI_EEH_FREEZE_STATUS call in
skiboot's NPU driver does not touch the pci_error_type parameter so
it might have garbage but the powernv code analyzes it nevertheless.
This initializes pcierr and fstate to zero in all call sites.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexey Kardashevskiy [Tue, 2 Oct 2018 03:22:31 +0000 (13:22 +1000)]
vfio/spapr_tce: Get rid of possible infinite loop
[ Upstream commit
517ad4ae8aa93dccdb9a88c27257ecb421c9e848 ]
As a part of cleanup, the SPAPR TCE IOMMU subdriver releases preregistered
memory. If there is a bug in memory release, the loop in
tce_iommu_release() becomes infinite; this actually happened to me.
This makes the loop finite and prints a warning on every failure to make
the code more bug prone.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benjamin Herrenschmidt [Tue, 11 Dec 2018 02:27:33 +0000 (13:27 +1100)]
powerpc/44x/bamboo: Fix PCI range
[ Upstream commit
3cfb9ebe906b51f2942b1e251009bb251efd2ba6 ]
The bamboo dts has a bug: it uses a non-naturally aligned range
for PCI memory space. This isnt' supported by the code, thus
causing PCI to break on this system.
This is due to the fact that while the chip memory map has 1G
reserved for PCI memory, it's only 512M aligned. The code doesn't
know how to split that into 2 different PMMs and fails, so limit
the region to 512M.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Fri, 14 Dec 2018 15:23:33 +0000 (15:23 +0000)]
powerpc/mm: Make NULL pointer deferences explicit on bad page faults.
[ Upstream commit
49a502ea23bf9dec47f8f3c3960909ff409cd1bb ]
As several other arches including x86, this patch makes it explicit
that a bad page fault is a NULL pointer dereference when the fault
address is lower than PAGE_SIZE
In the mean time, this page makes all bad_page_fault() messages
shorter so that they remain on one single line. And it prefixes them
by "BUG: " so that they get easily grepped.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Avoid pr_cont()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Fri, 14 Dec 2018 10:27:47 +0000 (10:27 +0000)]
powerpc/prom: fix early DEBUG messages
[ Upstream commit
b18f0ae92b0a1db565c3e505fa87b6971ad3b641 ]
This patch fixes early DEBUG messages in prom.c:
- Use %px instead of %p to see the addresses
- Cast memblock_phys_mem_size() with (unsigned long long) to
avoid build failure when phys_addr_t is not 64 bits.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joel Stanley [Mon, 12 Nov 2018 05:28:06 +0000 (15:58 +1030)]
powerpc/32: Avoid unsupported flags with clang
[ Upstream commit
72e7bcc2cdf82bf03caaa5e6c9b0134c2fc2ee7d ]
When building for ppc32 with clang these flags are unsupported:
-ffixed-r2 and -mmultiple
llvm's lib/Target/PowerPC/PPCRegisterInfo.cpp marks r2 as reserved on
when building for SVR4ABI and !ppc64:
// The SVR4 ABI reserves r2 and r13
if (Subtarget.isSVR4ABI()) {
// We only reserve r2 if we need to use the TOC pointer. If we have no
// explicit uses of the TOC pointer (meaning we're a leaf function with
// no constant-pool loads, etc.) and we have no potential uses inside an
// inline asm block, then we can treat r2 has an ordinary callee-saved
// register.
const PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>();
if (!TM.isPPC64() || FuncInfo->usesTOCBasePtr() || MF.hasInlineAsm())
markSuperRegs(Reserved, PPC::R2); // System-reserved register
markSuperRegs(Reserved, PPC::R13); // Small Data Area pointer register
}
This means we can safely omit -ffixed-r2 when building for 32-bit
targets.
The -mmultiple/-mno-multiple flags are not supported by clang, so
platforms that might support multiple miss out on using multiple word
instructions.
We wrap these flags in cc-option so that when Clang gains support the
kernel will be able use these flags.
Clang 8 can then build a ppc44x_defconfig which boots in Qemu:
make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- ppc44x_defconfig
./scripts/config -e CONFIG_DEVTMPFS -d DEVTMPFS_MOUNT
make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-
qemu-system-ppc -M bamboo \
-kernel arch/powerpc/boot/zImage \
-dtb arch/powerpc/boot/dts/bamboo.dtb \
-initrd ~/ppc32-440-rootfs.cpio \
-nographic -serial stdio -monitor pty -append "console=ttyS0"
Link: https://github.com/ClangBuiltLinux/linux/issues/261
Link: https://bugs.llvm.org/show_bug.cgi?id=39556
Link: https://bugs.llvm.org/show_bug.cgi?id=39555
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Madhavan Srinivasan [Mon, 9 Oct 2017 14:12:40 +0000 (19:42 +0530)]
powerpc/perf: Fix unit_sel/cache_sel checks
[ Upstream commit
2d46d4877b1afd14059393a48bdb8ce27955174c ]
Raw event code has couple of fields "unit" and "cache" in it, to capture
the "unit" to monitor for a given pmcxsel and cache reload qualifier to
program in MMCR1.
isa207_get_constraint() refers "unit" field to update the MMCRC (L2/L3)
Event bus control fields with "cache" bits of the raw event code.
These are power8 specific and not supported by PowerISA v3.0 pmu. So wrap
the checks to be power8 specific. Also, "cache" bit field is referred to
update MMCR1[16:17] and this check can be power8 specific.
Fixes:
7ffd948fae4cd ('powerpc/perf: factor out power8 pmu functions')
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kyle Roeschley [Wed, 5 Dec 2018 07:43:13 +0000 (09:43 +0200)]
ath6kl: Fix off by one error in scan completion
[ Upstream commit
5803c12816c43bd09e5f4247dd9313c2d9a2c41b ]
When ath6kl was reworked to share code between regular and scheduled scans
in commit
3b8ffc6a22ba ("ath6kl: Configure probed SSID list consistently"),
probed SSID entry changed from 1-index to 0-indexed. However,
ath6kl_cfg80211_scan_complete_event() was missed in that change. Fix its
indexing so that we correctly clear out the probed SSID list.
Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kyle Roeschley [Wed, 5 Dec 2018 07:43:11 +0000 (09:43 +0200)]
ath6kl: Only use match sets when firmware supports it
[ Upstream commit
fb376a495fbdb886f38cfaf5a3805401b9e46f13 ]
Commit
dd45b7598f1c ("ath6kl: Include match ssid list in scheduled scan")
merged the probed and matched SSID lists before sending them to the
firmware. In the process, it assumed match set support is always available
in ath6kl_set_probed_ssids, which breaks scans for hidden SSIDs. Now, check
that the firmware supports matching SSIDs in scheduled scans before setting
MATCH_SSID_FLAG.
Fixes:
dd45b7598f1c ("ath6kl: Include match ssid list in scheduled scan")
Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Wahren [Wed, 12 Dec 2018 19:20:06 +0000 (20:20 +0100)]
brcmfmac: Fix access point mode
[ Upstream commit
861cb5eb467f5e38dce1aabe4e8db379255bd89b ]
Since commit
1204aa17f3b4 ("brcmfmac: set WIPHY_FLAG_HAVE_AP_SME flag")
the Raspberry Pi 3 A+ (BCM43455) isn't able to operate in AP mode with
hostapd (device_ap_sme=1 use_monitor=0):
brcmfmac: brcmf_cfg80211_stop_ap: setting AP mode failed -52
So add the missing mgmt_stypes for AP mode to fix this.
Fixes:
1204aa17f3b4 ("brcmfmac: set WIPHY_FLAG_HAVE_AP_SME flag")
Suggested-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Varun Prakash [Wed, 19 Dec 2018 10:12:50 +0000 (15:42 +0530)]
scsi: csiostor: fix incorrect dma device in case of vport
[ Upstream commit
9934613edcb40b92a216122876cd3b7e76d08390 ]
In case of ->vport_create() call scsi_add_host_with_dma() instead of
scsi_add_host() to pass correct dma device.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anatoliy Glagolev [Thu, 6 Dec 2018 23:48:45 +0000 (16:48 -0700)]
scsi: qla2xxx: deadlock by configfs_depend_item
[ Upstream commit
17b18eaa6f59044a5172db7d07149e31ede0f920 ]
The intent of invoking configfs_depend_item in commit
7474f52a82d51
("tcm_qla2xxx: Perform configfs depend/undepend for base_tpg")
was to prevent a physical Fibre Channel port removal when
virtual (NPIV) ports announced through that physical port are active.
The change does not work as expected: it makes enabled physical port
dependent on target configfs subsystem (the port's parent), something
the configfs guarantees anyway.
Besides, scheduling work in a worker thread and waiting for the work's
completion is not really a valid workaround for the requirement not to call
configfs_depend_item from a configfs callback: the call occasionally
deadlocks.
Thus, removing configfs_depend_item calls does not break anything and fixes
the deadlock problem.
Signed-off-by: Anatoliy Glagolev <glagolig@gmail.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bart Van Assche [Mon, 17 Dec 2018 21:20:36 +0000 (13:20 -0800)]
RDMA/srp: Propagate ib_post_send() failures to the SCSI mid-layer
[ Upstream commit
2ee00f6a98c36f7e4ba07cc33f24cc5a69060cc9 ]
This patch avoids that the SCSI mid-layer keeps retrying forever if
ib_post_send() fails. This was discovered while testing immediate
data support and passing a too large num_sge value to ib_post_send().
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Mon, 3 Dec 2018 12:20:47 +0000 (13:20 +0100)]
openrisc: Fix broken paths to arch/or32
[ Upstream commit
57ce8ba0fd3a95bf29ed741df1c52bd591bf43ff ]
OpenRISC was mainlined as "openrisc", not "or32".
vmlinux.lds is generated from vmlinux.lds.S.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Shiyan [Wed, 19 Dec 2018 11:19:20 +0000 (14:19 +0300)]
serial: max310x: Fix tx_empty() callback
[ Upstream commit
a8da3c7873ea57acb8f9cea58c0af477522965aa ]
Function max310x_tx_empty() accesses the IRQSTS register, which is
cleared by IC when reading, so if there is an interrupt status, we
will lose it. This patch implement the transmitter check only by
the current FIFO level.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Bakker [Wed, 19 Dec 2018 11:22:28 +0000 (12:22 +0100)]
Bluetooth: hci_bcm: Handle specific unknown packets after firmware loading
[ Upstream commit
22bba80500fdf624a7cfbb65fdfa97a038ae224d ]
The Broadcom controller on aries S5PV210 boards sends out a couple of
unknown packets after the firmware is loaded. This will cause
logging of errors such as:
Bluetooth: hci0: Frame reassembly failed (-84)
This is probably also the case with other boards, as there are related
Android userspace patches for custom ROMs such as
https://review.lineageos.org/#/c/LineageOS/android_system_bt/+/142721/
Since this appears to be intended behaviour, treated them as diagnostic
packets.
Note that this is another variant of commit
01d5e44ace8a
("Bluetooth: hci_bcm: Handle empty packet after firmware loading")
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Wed, 19 Dec 2018 05:04:13 +0000 (23:04 -0600)]
drivers/regulator: fix a missing check of return value
[ Upstream commit
966e927bf8cc6a44f8b72582a1d6d3ffc73b12ad ]
If palmas_smps_read() fails, we should not use the read data in "reg"
which may contain random value. The fix inserts a check for the return
value of palmas_smps_read(): If it fails, we return the error code
upstream and stop using "reg".
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Fri, 16 Nov 2018 17:31:08 +0000 (17:31 +0000)]
powerpc/xmon: fix dump_segments()
[ Upstream commit
32c8c4c621897199e690760c2d57054f8b84b6e6 ]
mfsrin() takes segment num from bits 31-28 (IBM bits 0-3).
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Clarify bit numbering]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Fri, 16 Nov 2018 17:27:42 +0000 (17:27 +0000)]
powerpc/book3s/32: fix number of bats in p/v_block_mapped()
[ Upstream commit
e93ba1b7eb5b188c749052df7af1c90821c5f320 ]
This patch fixes the loop in p_block_mapped() and v_block_mapped()
to scan the entire bat_addrs[] array.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Petr Machata [Tue, 18 Dec 2018 13:16:00 +0000 (13:16 +0000)]
vxlan: Fix error path in __vxlan_dev_create()
[ Upstream commit
6db9246871394b3a136cd52001a0763676563840 ]
When a failure occurs in rtnl_configure_link(), the current code
calls unregister_netdevice() to roll back the earlier call to
register_netdevice(), and jumps to errout, which calls
vxlan_fdb_destroy().
However unregister_netdevice() calls transitively ndo_uninit, which is
vxlan_uninit(), and that already takes care of deleting the default FDB
entry by calling vxlan_fdb_delete_default(). Since the entry added
earlier in __vxlan_dev_create() is exactly the default entry, the
cleanup code in the errout block always leads to double free and thus a
panic.
Besides, since vxlan_fdb_delete_default() always destroys the FDB entry
with notification enabled, the deletion of the default entry is notified
even before the addition was notified.
Instead, move the unregister_netdevice() call after the manual destroy,
which solves both problems.
Fixes:
0241b836732f ("vxlan: fix default fdb entry netlink notify ordering during netdev create")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tao Ren [Wed, 3 Oct 2018 21:53:50 +0000 (14:53 -0700)]
clocksource/drivers/fttmr010: Fix invalid interrupt register access
[ Upstream commit
86fe57fc47b17b3528fa5497fc57e158d846c4ea ]
TIMER_INTR_MASK register (Base Address of Timer + 0x38) is not designed
for masking interrupts on ast2500 chips, and it's not even listed in
ast2400 datasheet, so it's not safe to access TIMER_INTR_MASK on aspeed
chips.
Similarly, TIMER_INTR_STATE register (Base Address of Timer + 0x34) is
not interrupt status register on ast2400 and ast2500 chips. Although
there is no side effect to reset the register in fttmr010_common_init(),
it's just misleading to do so.
Besides, "count_down" is renamed to "is_aspeed" in "fttmr010" structure,
and more comments are added so the code is more readble.
Signed-off-by: Tao Ren <taoren@fb.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 17 Dec 2018 07:05:36 +0000 (10:05 +0300)]
IB/qib: Fix an error code in qib_sdma_verbs_send()
[ Upstream commit
5050ae5fa3d54c8e83e1e447cc7e3591110a7f57 ]
We accidentally return success on this error path.
Fixes:
f931551bafe1 ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nick Bowler [Mon, 17 Dec 2018 17:35:27 +0000 (09:35 -0800)]
xfs: Fix bulkstat compat ioctls on x32 userspace.
[ Upstream commit
7ca860e3c1a74ad6bd8949364073ef1044cad758 ]
The bulkstat family of ioctls are problematic on x32, because there is
a mixup of native 32-bit and 64-bit conventions. The xfs_fsop_bulkreq
struct contains pointers and 32-bit integers so that matches the native
32-bit layout, and that means the ioctl implementation goes into the
regular compat path on x32.
However, the 'ubuffer' member of that struct in turn refers to either
struct xfs_inogrp or xfs_bstat (or an array of these). On x32, those
structures match the native 64-bit layout. The compat implementation
writes out the 32-bit version of these structures. This is not the
expected format for x32 userspace, causing problems.
Fortunately the functions which actually output these xfs_inogrp and
xfs_bstat structures have an easy way to select which output format
is required, so we just need a little tweak to select the right format
on x32.
Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nick Bowler [Mon, 17 Dec 2018 17:35:27 +0000 (09:35 -0800)]
xfs: Align compat attrlist_by_handle with native implementation.
[ Upstream commit
c456d64449efe37da50832b63d91652a85ea1d20 ]
While inspecting the ioctl implementations, I noticed that the compat
implementation of XFS_IOC_ATTRLIST_BY_HANDLE does not do exactly the
same thing as the native implementation. Specifically, the "cursor"
does not appear to be written out to userspace on the compat path,
like it is on the native path.
This adjusts the compat implementation to copy out the cursor just
like the native implementation does. The attrlist cursor does not
require any special compat handling. This fixes xfstests xfs/269
on both IA-32 and x32 userspace, when running on an amd64 kernel.
Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Fixes:
0facef7fb053b ("xfs: in _attrlist_by_handle, copy the cursor back to userspace")
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heinz Mauelshagen [Tue, 18 Dec 2018 16:35:41 +0000 (17:35 +0100)]
dm raid: fix false -EBUSY when handling check/repair message
[ Upstream commit
74694bcbdf7e28a5ad548cdda9ac56d30be00d13 ]
Sending a check/repair message infrequently leads to -EBUSY instead of
properly identifying an active resync. This occurs because
raid_message() is testing recovery bits in a racy way.
Fix by calling decipher_sync_action() from raid_message() to properly
identify the idle state of the RAID device.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bob Peterson [Tue, 18 Dec 2018 14:29:32 +0000 (08:29 -0600)]
gfs2: take jdata unstuff into account in do_grow
[ Upstream commit
bc0205612bbd4dd4026d4ba6287f5643c37366ec ]
Before this patch, function do_grow would not reserve enough journal
blocks in the transaction to unstuff jdata files while growing them.
This patch adds the logic to add one more block if the file to grow
is jdata.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sweet Tea [Tue, 13 Nov 2018 13:04:24 +0000 (08:04 -0500)]
dm flakey: Properly corrupt multi-page bios.
[ Upstream commit
a00f5276e26636cbf72f24f79831026d2e2868e7 ]
The flakey target is documented to be able to corrupt the Nth byte in
a bio, but does not corrupt byte indices after the first biovec in the
bio. Change the corrupting function to actually corrupt the Nth byte
no matter in which biovec that index falls.
A test device generating two-page bios, atop a flakey device configured
to corrupt a byte index on the second page, verified both the failure
to corrupt before this patch and the expected corruption after this
change.
Signed-off-by: John Dorminy <jdorminy@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Hutterer [Thu, 13 Dec 2018 01:28:51 +0000 (11:28 +1000)]
HID: doc: fix wrong data structure reference for UHID_OUTPUT
[ Upstream commit
46b14eef59a8157138dc02f916a7f97c73b3ec53 ]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Thu, 13 Dec 2018 13:41:11 +0000 (14:41 +0100)]
pinctrl: sh-pfc: sh7734: Fix shifted values in IPSR10
[ Upstream commit
054f2400f706327f96770219c3065b5131f8f154 ]
Some values in the Peripheral Function Select Register 10 descriptor are
shifted by one position, which may cause a peripheral function to be
programmed incorrectly.
Fixing this makes all HSCIF0 pins use Function 4 (value 3), like was
already the case for the HSCK0 pin in field IP10[5:3].
Fixes:
ac1ebc2190f575fc ("sh-pfc: Add sh7734 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Thu, 13 Dec 2018 13:09:56 +0000 (14:09 +0100)]
pinctrl: sh-pfc: sh7264: Fix PFCR3 and PFCR0 register configuration
[ Upstream commit
1b99d0c80bbe1810572c2cb77b90f67886adfa8d ]
The Port F Control Register 3 (PFCR3) contains only a single field.
However, counting from left to right, it is the fourth field, not the
first field.
Insert the missing dummy configuration values (3 fields of 16 values) to
fix this.
The descriptor for the Port F Control Register 0 (PFCR0) lacks the
description for the 4th field (PF0 Mode, PF0MD[2:0]).
Add the missing configuration values to fix this.
Fixes:
a8d42fc4217b1ea1 ("sh-pfc: Add sh7264 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>