OSDN Git Service
Tariq Toukan [Thu, 3 Dec 2020 04:39:45 +0000 (20:39 -0800)]
net/mlx5e: kTLS, Enforce HW TX csum offload with kTLS
Checksum calculation cannot be done in SW for TX kTLS HW offloaded
packets.
Offload it to the device, disregard the declared state of the TX
csum offload feature.
Fixes:
d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Randy Dunlap [Thu, 3 Dec 2020 04:39:44 +0000 (20:39 -0800)]
net: mlx5e: fix fs_tcp.c build when IPV6 is not enabled
Fix build when CONFIG_IPV6 is not enabled by making a function
be built conditionally.
Fixes these build errors and warnings:
../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c: In function 'accel_fs_tcp_set_ipv6_flow':
../include/net/sock.h:380:34: error: 'struct sock_common' has no member named 'skc_v6_daddr'; did you mean 'skc_daddr'?
380 | #define sk_v6_daddr __sk_common.skc_v6_daddr
| ^~~~~~~~~~~~
../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c:55:14: note: in expansion of macro 'sk_v6_daddr'
55 | &sk->sk_v6_daddr, 16);
| ^~~~~~~~~~~
At top level:
../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c:47:13: warning: 'accel_fs_tcp_set_ipv6_flow' defined but not used [-Wunused-function]
47 | static void accel_fs_tcp_set_ipv6_flow(struct mlx5_flow_spec *spec, struct sock *sk)
Fixes:
5229a96e59ec ("net/mlx5e: Accel, Expose flow steering API for rules add/del")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eran Ben Elisha [Thu, 3 Dec 2020 04:39:43 +0000 (20:39 -0800)]
net/mlx5: Fix wrong address reclaim when command interface is down
When command interface is down, driver to reclaim all 4K page chucks that
were hold by the Firmeware. Fix a bug for 64K page size systems, where
driver repeatedly released only the first chunk of the page.
Define helper function to fill 4K chunks for a given Firmware pages.
Iterate over all unreleased Firmware pages and call the hepler per each.
Fixes:
5adff6a08862 ("net/mlx5: Fix incorrect page count when in internal error")
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Davide Caratti [Thu, 3 Dec 2020 09:37:52 +0000 (10:37 +0100)]
net/sched: act_mpls: ensure LSE is pullable before reading it
when 'act_mpls' is used to mangle the LSE, the current value is read from
the packet dereferencing 4 bytes at mpls_hdr(): ensure that the label is
contained in the skb "linear" area.
Found by code inspection.
v2:
- use MPLS_HLEN instead of sizeof(new_lse), thanks to Jakub Kicinski
Fixes:
2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/3243506cba43d14858f3bd21ee0994160e44d64a.1606987058.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Davide Caratti [Thu, 3 Dec 2020 09:46:06 +0000 (10:46 +0100)]
net: openvswitch: ensure LSE is pullable before reading it
when openvswitch is configured to mangle the LSE, the current value is
read from the packet dereferencing 4 bytes at mpls_hdr(): ensure that
the label is contained in the skb "linear" area.
Found by code inspection.
Fixes:
d27cf5c59a12 ("net: core: add MPLS update core helper and use in OvS")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/aa099f245d93218b84b5c056b67b6058ccf81a66.1606987185.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Davide Caratti [Thu, 3 Dec 2020 09:58:21 +0000 (10:58 +0100)]
net: skbuff: ensure LSE is pullable before decrementing the MPLS ttl
skb_mpls_dec_ttl() reads the LSE without ensuring that it is contained in
the skb "linear" area. Fix this calling pskb_may_pull() before reading the
current ttl.
Found by code inspection.
Fixes:
2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/53659f28be8bc336c113b5254dc637cc76bbae91.1606987074.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 3 Dec 2020 18:59:28 +0000 (10:59 -0800)]
Merge tag 'wireless-drivers-2020-12-03' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.10
Second, and most likely final, set of fixes for v5.10. Small fixes and
PCI id addtions.
iwlwifi
* PCI id additions
mt76
* fix a kernel crash during device removal
rtw88
* fix uninitialized memory in debugfs code
* tag 'wireless-drivers-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers:
rtw88: debug: Fix uninitialized memory in debugfs code
mt76: usb: fix crash on device removal
iwlwifi: pcie: add some missing entries for AX210
iwlwifi: pcie: invert values of NO_160 device config entries
iwlwifi: pcie: add one missing entry for AX210
iwlwifi: update MAINTAINERS entry
====================
Link: https://lore.kernel.org/r/20201203183408.EE88AC43461@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wang Hai [Thu, 3 Dec 2020 14:18:06 +0000 (22:18 +0800)]
net: mvpp2: Fix error return code in mvpp2_open()
Fix to return negative error code -ENOENT from invalid configuration
error handling case instead of 0, as done elsewhere in this function.
Fixes:
4bb043262878 ("net: mvpp2: phylink support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201203141806.37966-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Thu, 3 Dec 2020 08:44:31 +0000 (11:44 +0300)]
chelsio/chtls: fix a double free in chtls_setkey()
The "skb" is freed by the transmit code in cxgb4_ofld_send() and we
shouldn't use it again. But in the current code, if we hit an error
later on in the function then the clean up code will call kfree_skb(skb)
and so it causes a double free.
Set the "skb" to NULL and that makes the kfree_skb() a no-op.
Fixes:
d25f2f71f653 ("crypto: chtls - Program the TLS session Key")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X8ilb6PtBRLWiSHp@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Thu, 3 Dec 2020 08:43:37 +0000 (11:43 +0300)]
rtw88: debug: Fix uninitialized memory in debugfs code
This code does not ensure that the whole buffer is initialized and none
of the callers check for errors so potentially none of the buffer is
initialized. Add a memset to eliminate this bug.
Fixes:
e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/X8ilOfVz3pf0T5ec@mwanda
Zhang Changzhong [Wed, 2 Dec 2020 09:58:42 +0000 (17:58 +0800)]
vxlan: fix error return code in __vxlan_dev_create()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
0ce1822c2a08 ("vxlan: add adjacent link to limit depth level")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1606903122-2098-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhang Changzhong [Wed, 2 Dec 2020 09:57:15 +0000 (17:57 +0800)]
net: pasemi: fix error return code in pasemi_mac_open()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
72b05b9940f0 ("pasemi_mac: RX/TX ring management cleanup")
Fixes:
8d636d8bc5ff ("pasemi_mac: jumbo frame support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1606903035-1838-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhang Changzhong [Wed, 2 Dec 2020 09:56:05 +0000 (17:56 +0800)]
cxgb3: fix error return code in t3_sge_alloc_qset()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
b1fb1f280d09 ("cxgb3 - Fix dma mapping error path")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Raju Rangoju <rajur@chelsio.com>
Link: https://lore.kernel.org/r/1606902965-1646-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Tue, 1 Dec 2020 15:15:12 +0000 (18:15 +0300)]
net/x25: prevent a couple of overflows
The .x25_addr[] address comes from the user and is not necessarily
NUL terminated. This leads to a couple problems. The first problem is
that the strlen() in x25_bind() can read beyond the end of the buffer.
The second problem is more subtle and could result in memory corruption.
The call tree is:
x25_connect()
--> x25_write_internal()
--> x25_addr_aton()
The .x25_addr[] buffers are copied to the "addresses" buffer from
x25_write_internal() so it will lead to stack corruption.
Verify that the strings are NUL terminated and return -EINVAL if they
are not.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes:
a9288525d2ae ("X25: Dont let x25_bind use addresses containing characters")
Reported-by: "kiyin(尹亮)" <kiyin@tencent.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/X8ZeAKm8FnFpN//B@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yangbo Lu [Tue, 1 Dec 2020 07:52:58 +0000 (15:52 +0800)]
dpaa_eth: copy timestamp fields to new skb in A-050385 workaround
The timestamp fields should be copied to new skb too in
A-050385 workaround for later TX timestamping handling.
Fixes:
3c68b8fffb48 ("dpaa_eth: FMan erratum
A050385 workaround")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Link: https://lore.kernel.org/r/20201201075258.1875-1-yangbo.lu@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Antoine Tenart [Mon, 30 Nov 2020 16:19:11 +0000 (17:19 +0100)]
net: ip6_gre: set dev->hard_header_len when using header_ops
syzkaller managed to crash the kernel using an NBMA ip6gre interface. I
could reproduce it creating an NBMA ip6gre interface and forwarding
traffic to it:
skbuff: skb_under_panic: text:
ffffffff8250e927 len:148 put:44 head:
ffff8c03c7a33
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:109!
Call Trace:
skb_push+0x10/0x10
ip6gre_header+0x47/0x1b0
neigh_connected_output+0xae/0xf0
ip6gre tunnel provides its own header_ops->create, and sets it
conditionally when initializing the tunnel in NBMA mode. When
header_ops->create is used, dev->hard_header_len should reflect the
length of the header created. Otherwise, when not used,
dev->needed_headroom should be used.
Fixes:
eb95f52fc72d ("net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap")
Cc: Maria Pasechnik <mariap@mellanox.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20201130161911.464106-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stanislaw Gruszka [Thu, 26 Nov 2020 12:55:20 +0000 (13:55 +0100)]
mt76: usb: fix crash on device removal
Currently 'while (q->queued > 0)' loop was removed from mt76u_stop_tx()
code. This causes crash on device removal as we try to cleanup empty
queue:
[ 96.495571] kernel BUG at include/linux/skbuff.h:2297!
[ 96.498983] invalid opcode: 0000 [#1] SMP PTI
[ 96.501162] CPU: 3 PID: 27 Comm: kworker/3:0 Not tainted 5.10.0-rc5+ #11
[ 96.502754] Hardware name: LENOVO 20DGS08H00/20DGS08H00, BIOS J5ET48WW (1.19 ) 08/27/2015
[ 96.504378] Workqueue: usb_hub_wq hub_event
[ 96.505983] RIP: 0010:skb_pull+0x2d/0x30
[ 96.507576] Code: 00 00 8b 47 70 39 c6 77 1e 29 f0 89 47 70 3b 47 74 72 17 48 8b 87 c8 00 00 00 89 f6 48 01 f0 48 89 87 c8 00 00 00 c3 31 c0 c3 <0f> 0b 90 0f 1f 44 00 00 53 48 89 fb 48 8b bf c8 00 00 00 8b 43 70
[ 96.509296] RSP: 0018:
ffffb11b801639b8 EFLAGS:
00010287
[ 96.511038] RAX:
000000001c6939ed RBX:
ffffb11b801639f8 RCX:
0000000000000000
[ 96.512964] RDX:
ffffb11b801639f8 RSI:
0000000000000018 RDI:
ffff90c64e4fb800
[ 96.514710] RBP:
ffff90c654551ee0 R08:
ffff90c652bce7a8 R09:
ffffb11b80163728
[ 96.516450] R10:
0000000000000001 R11:
0000000000000001 R12:
ffff90c64e4fb800
[ 96.519749] R13:
0000000000000010 R14:
0000000000000020 R15:
ffff90c64e352ce8
[ 96.523455] FS:
0000000000000000(0000) GS:
ffff90c96eec0000(0000) knlGS:
0000000000000000
[ 96.527171] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 96.530900] CR2:
0000242556f18288 CR3:
0000000146a10002 CR4:
00000000003706e0
[ 96.534678] Call Trace:
[ 96.538418] mt76x02u_tx_complete_skb+0x1f/0x50 [mt76x02_usb]
[ 96.542231] mt76_queue_tx_complete+0x23/0x50 [mt76]
[ 96.546028] mt76u_stop_tx.cold+0x71/0xa2 [mt76_usb]
[ 96.549797] mt76x0u_stop+0x2f/0x90 [mt76x0u]
[ 96.553638] drv_stop+0x33/0xd0 [mac80211]
[ 96.557449] ieee80211_do_stop+0x558/0x860 [mac80211]
[ 96.561262] ? dev_deactivate_many+0x298/0x2d0
[ 96.565101] ieee80211_stop+0x16/0x20 [mac80211]
Fix that by adding while loop again. We need loop, not just single
check, to clean all pending entries.
Additionally move mt76_worker_disable/enable after !mt76_has_tx_pending()
as we want to tx_worker to run to process tx queues, while we wait for
exactly that.
I was a bit worried about accessing q->queued without lock, but
mt76_worker_disable() -> kthread_park() should assure this value will
be seen updated on other cpus.
Fixes:
fe5b5ab52e9d ("mt76: unify queue tx cleanup code")
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126125520.72912-1-stf_xl@wp.pl
Golan Ben Ami [Wed, 2 Dec 2020 12:41:51 +0000 (14:41 +0200)]
iwlwifi: pcie: add some missing entries for AX210
Some subsytem device IDs were missing from the list, so some AX210
devices were not recognized. Add them.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.a06ba7540449.I7390305d088a49c1043c9b489154fe057989c18f@changeid
Link: https://lore.kernel.org/r/20201121003411.9450-1-ikegami.t@gmail.com
Luca Coelho [Wed, 2 Dec 2020 12:41:50 +0000 (14:41 +0200)]
iwlwifi: pcie: invert values of NO_160 device config entries
The NO_160 flag specifies if the device doesn't have 160 MHz support,
but we errorneously assumed the opposite. If the flag was set, we
were considering that 160 MHz was supported, but it's actually the
opposite. Fix it by inverting the bits, i.e. NO_160 is 0x1 and 160
is 0x0.
Fixes:
d6f2134a3831 ("iwlwifi: add mac/rf types and 160MHz to the device tables")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.375bec857ccb.I83884286b688965293e9810381808039bd7eedae@changeid
Luca Coelho [Wed, 2 Dec 2020 12:41:49 +0000 (14:41 +0200)]
iwlwifi: pcie: add one missing entry for AX210
The 0x0024 subsytem device ID was missing from the list, so some AX210
devices were not recognized. Add it.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.308eab4db42c.I3763196cd3f7bb36f3dcabf02ec4e7c4fe859c0f@changeid
Johannes Berg [Sun, 29 Nov 2020 13:14:38 +0000 (15:14 +0200)]
iwlwifi: update MAINTAINERS entry
Reflect the fact that the linuxwifi@intel.com address will disappear,
and that neither Emmanuel nor myself are really much involved with
the maintenance these days.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201129151117.a25afe6d2c7f.I8f13a5689dd353825fb2b9bd5b6f0fbce92cb12b@changeid
Eric Dumazet [Tue, 1 Dec 2020 09:05:07 +0000 (01:05 -0800)]
geneve: pull IP header before ECN decapsulation
IP_ECN_decapsulate() and IP6_ECN_decapsulate() assume
IP header is already pulled.
geneve does not ensure this yet.
Fixing this generically in IP_ECN_decapsulate() and
IP6_ECN_decapsulate() is not possible, since callers
pass a pointer that might be freed by pskb_may_pull()
syzbot reported :
BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:238 [inline]
BUG: KMSAN: uninit-value in INET_ECN_decapsulate+0x345/0x1db0 include/net/inet_ecn.h:260
CPU: 1 PID: 8941 Comm: syz-executor.0 Not tainted 5.10.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x21c/0x280 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x5f/0xa0 mm/kmsan/kmsan_instr.c:197
__INET_ECN_decapsulate include/net/inet_ecn.h:238 [inline]
INET_ECN_decapsulate+0x345/0x1db0 include/net/inet_ecn.h:260
geneve_rx+0x2103/0x2980 include/net/inet_ecn.h:306
geneve_udp_encap_recv+0x105c/0x1340 drivers/net/geneve.c:377
udp_queue_rcv_one_skb+0x193a/0x1af0 net/ipv4/udp.c:2093
udp_queue_rcv_skb+0x282/0x1050 net/ipv4/udp.c:2167
udp_unicast_rcv_skb net/ipv4/udp.c:2325 [inline]
__udp4_lib_rcv+0x399d/0x5880 net/ipv4/udp.c:2394
udp_rcv+0x5c/0x70 net/ipv4/udp.c:2564
ip_protocol_deliver_rcu+0x572/0xc50 net/ipv4/ip_input.c:204
ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
ip_local_deliver+0x583/0x8d0 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:449 [inline]
ip_rcv_finish net/ipv4/ip_input.c:428 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
ip_rcv+0x5c3/0x840 net/ipv4/ip_input.c:539
__netif_receive_skb_one_core net/core/dev.c:5315 [inline]
__netif_receive_skb+0x1ec/0x640 net/core/dev.c:5429
process_backlog+0x523/0xc10 net/core/dev.c:6319
napi_poll+0x420/0x1010 net/core/dev.c:6763
net_rx_action+0x35c/0xd40 net/core/dev.c:6833
__do_softirq+0x1a9/0x6fa kernel/softirq.c:298
asm_call_irq_on_stack+0xf/0x20
</IRQ>
__run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline]
run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline]
do_softirq_own_stack+0x6e/0x90 arch/x86/kernel/irq_64.c:77
do_softirq kernel/softirq.c:343 [inline]
__local_bh_enable_ip+0x184/0x1d0 kernel/softirq.c:195
local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32
rcu_read_unlock_bh include/linux/rcupdate.h:730 [inline]
__dev_queue_xmit+0x3a9b/0x4520 net/core/dev.c:4167
dev_queue_xmit+0x4b/0x60 net/core/dev.c:4173
packet_snd net/packet/af_packet.c:2992 [inline]
packet_sendmsg+0x86f9/0x99d0 net/packet/af_packet.c:3017
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
__sys_sendto+0x9dc/0xc80 net/socket.c:1992
__do_sys_sendto net/socket.c:2004 [inline]
__se_sys_sendto+0x107/0x130 net/socket.c:2000
__x64_sys_sendto+0x6e/0x90 net/socket.c:2000
do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20201201090507.4137906-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Toke Høiland-Jørgensen [Mon, 30 Nov 2020 18:37:05 +0000 (19:37 +0100)]
inet_ecn: Fix endianness of checksum update when setting ECT(1)
When adding support for propagating ECT(1) marking in IP headers it seems I
suffered from endianness-confusion in the checksum update calculation: In
fact the ECN field is in the *lower* bits of the first 16-bit word of the
IP header when calculating in network byte order. This means that the
addition performed to update the checksum field was wrong; let's fix that.
Fixes:
b723748750ec ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040")
Reported-by: Jonathan Morton <chromatix99@gmail.com>
Tested-by: Pete Heist <pete@heistp.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20201130183705.17540-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoang Le [Mon, 30 Nov 2020 02:55:44 +0000 (09:55 +0700)]
tipc: fix incompatible mtu of transmission
In commit
682cd3cf946b6
("tipc: confgiure and apply UDP bearer MTU on running links"), we
introduced a function to change UDP bearer MTU and applied this new value
across existing per-link. However, we did not apply this new MTU value at
node level. This lead to packet dropped at link level if its size is
greater than new MTU value.
To fix this issue, we also apply this new MTU value for node level.
Fixes:
682cd3cf946b6 ("tipc: confgiure and apply UDP bearer MTU on running links")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Link: https://lore.kernel.org/r/20201130025544.3602-1-hoang.h.le@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Randy Dunlap [Sun, 29 Nov 2020 07:08:43 +0000 (23:08 -0800)]
net: broadcom CNIC: requires MMU
The CNIC kconfig symbol selects UIO and UIO depends on MMU.
Since 'select' does not follow dependency chains, add the same MMU
dependency to CNIC.
Quietens this kconfig warning:
WARNING: unmet direct dependencies detected for UIO
Depends on [n]: MMU [=n]
Selected by [m]:
- CNIC [=m] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=m] || IPV6 [=m]=n)
Fixes:
adfc5217e9db ("broadcom: Move the Broadcom drivers")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Rasesh Mody <rmody@marvell.com>
Cc: GR-Linux-NIC-Dev@marvell.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20201129070843.3859-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David S. Miller [Tue, 1 Dec 2020 18:09:04 +0000 (10:09 -0800)]
Merge branch 'ibmvnic-Bug-fixes-for-queue-descriptor-processing'
Thomas Falcon says:
====================
ibmvnic: Bug fixes for queue descriptor processing
This series resolves a few issues in the ibmvnic driver's
RX buffer and TX completion processing. The first patch
includes memory barriers to synchronize queue descriptor
reads. The second patch fixes a memory leak that could
occur if the device returns a TX completion with an error
code in the descriptor, in which case the respective socket
buffer and other relevant data structures may not be freed
or updated properly.
v3: Correct length of Fixes tags, requested by Jakub Kicinski
v2: Provide more detailed comments explaining specifically what
reads are being ordered, suggested by Michael Ellerman
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Tue, 1 Dec 2020 15:52:11 +0000 (09:52 -0600)]
ibmvnic: Fix TX completion error handling
TX completions received with an error return code are not
being processed properly. When an error code is seen, do not
proceed to the next completion before cleaning up the existing
entry's data structures.
Fixes:
032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Tue, 1 Dec 2020 15:52:10 +0000 (09:52 -0600)]
ibmvnic: Ensure that SCRQ entry reads are correctly ordered
Ensure that received Subordinate Command-Response Queue (SCRQ)
entries are properly read in order by the driver. These queues
are used in the ibmvnic device to process RX buffer and TX completion
descriptors. dma_rmb barriers have been added after checking for a
pending descriptor to ensure the correct descriptor entry is checked
and after reading the SCRQ descriptor to ensure the entire
descriptor is read before processing.
Fixes:
032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 1 Dec 2020 03:03:48 +0000 (19:03 -0800)]
Merge tag 'linux-can-fixes-for-5.10-
20201130' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2020-11-30
The first patch is by me an target the tcan4x5x bindings for the m_can driver.
It fixes the error path in the tcan4x5x_can_probe() function.
The next two patches are by Jeroen Hofstee and makes the lost of arbitration
error counters of sja1000 and the sun4i drivers consistent with the other
drivers.
Zhang Qilong contributes two patch that clean up the error path in the c_can
and kvaser_pciefd drivers.
* tag 'linux-can-fixes-for-5.10-
20201130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: kvaser_pciefd: kvaser_pciefd_open(): fix error handling
can: c_can: c_can_power_up(): fix error handling
can: sun4i_can: sun4i_can_err(): don't count arbitration lose as an error
can: sja1000: sja1000_err(): don't count arbitration lose as an error
can: m_can: tcan4x5x_can_probe(): fix error path: remove erroneous clk_disable_unprepare()
====================
Link: https://lore.kernel.org/r/20201130125307.218258-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sven Eckelmann [Thu, 26 Nov 2020 12:52:47 +0000 (13:52 +0100)]
vxlan: Copy needed_tailroom from lowerdev
While vxlan doesn't need any extra tailroom, the lowerdev might need it. In
that case, copy it over to reduce the chance for additional (re)allocations
in the transmit path.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20201126125247.1047977-2-sven@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sven Eckelmann [Thu, 26 Nov 2020 12:52:46 +0000 (13:52 +0100)]
vxlan: Add needed_headroom for lower device
It was observed that sending data via batadv over vxlan (on top of
wireguard) reduced the performance massively compared to raw ethernet or
batadv on raw ethernet. A check of perf data showed that the
vxlan_build_skb was calling all the time pskb_expand_head to allocate
enough headroom for:
min_headroom = LL_RESERVED_SPACE(dst->dev) + dst->header_len
+ VXLAN_HLEN + iphdr_len;
But the vxlan_config_apply only requested needed headroom for:
lowerdev->hard_header_len + VXLAN6_HEADROOM or VXLAN_HEADROOM
So it completely ignored the needed_headroom of the lower device. The first
caller of net_dev_xmit could therefore never make sure that enough headroom
was allocated for the rest of the transmit path.
Cc: Annika Wickert <annika.wickert@exaring.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Tested-by: Annika Wickert <aw@awlnx.space>
Link: https://lore.kernel.org/r/20201126125247.1047977-1-sven@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vinay Kumar Yadav [Wed, 25 Nov 2020 21:49:14 +0000 (03:19 +0530)]
chelsio/chtls: fix panic during unload reload chtls
there is kernel panic in inet_twsk_free() while chtls
module unload when socket is in TIME_WAIT state because
sk_prot_creator was not preserved on connection socket.
Fixes:
cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Udai Sharma <udai.sharma@chelsio.com>
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Link: https://lore.kernel.org/r/20201125214913.16938-1-vinay.yadav@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhang Qilong [Sat, 28 Nov 2020 13:39:22 +0000 (21:39 +0800)]
can: kvaser_pciefd: kvaser_pciefd_open(): fix error handling
If kvaser_pciefd_bus_on() failed, we should call close_candev() to avoid
reference leak.
Fixes:
26ad340e582d3 ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201128133922.3276973-3-zhangqilong3@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Zhang Qilong [Sat, 28 Nov 2020 13:39:21 +0000 (21:39 +0800)]
can: c_can: c_can_power_up(): fix error handling
In the error handling in c_can_power_up(), there are two bugs:
1) c_can_pm_runtime_get_sync() will increase usage counter if device is not
empty. Forgetting to call c_can_pm_runtime_put_sync() will result in a
reference leak here.
2) c_can_reset_ram() operation will set start bit when enable is true. We
should clear it in the error handling.
We fix it by adding c_can_pm_runtime_put_sync() for 1), and
c_can_reset_ram(enable is false) for 2) in the error handling.
Fixes:
8212003260c60 ("can: c_can: Add d_can suspend resume support")
Fixes:
52cde85acc23f ("can: c_can: Add d_can raminit support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201128133922.3276973-2-zhangqilong3@huawei.com
[mkl: return "0" instead of "ret"]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Jeroen Hofstee [Fri, 27 Nov 2020 09:59:38 +0000 (10:59 +0100)]
can: sun4i_can: sun4i_can_err(): don't count arbitration lose as an error
Losing arbitration is normal in a CAN-bus network, it means that a higher
priority frame is being send and the pending message will be retried later.
Hence most driver only increment arbitration_lost, but the sun4i driver also
incremeants tx_error, causing errors to be reported on a normal functioning
CAN-bus. So stop counting them as errors.
Fixes:
0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Link: https://lore.kernel.org/r/20201127095941.21609-1-jhofstee@victronenergy.com
[mkl: split into two seperate patches]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Jeroen Hofstee [Fri, 27 Nov 2020 09:59:38 +0000 (10:59 +0100)]
can: sja1000: sja1000_err(): don't count arbitration lose as an error
Losing arbitration is normal in a CAN-bus network, it means that a higher
priority frame is being send and the pending message will be retried later.
Hence most driver only increment arbitration_lost, but the sja1000 driver also
incremeants tx_error, causing errors to be reported on a normal functioning
CAN-bus. So stop counting them as errors.
Fixes:
8935f57e68c4 ("can: sja1000: fix network statistics update")
Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Link: https://lore.kernel.org/r/20201127095941.21609-1-jhofstee@victronenergy.com
[mkl: split into two seperate patches]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Fri, 27 Nov 2020 15:17:11 +0000 (16:17 +0100)]
can: m_can: tcan4x5x_can_probe(): fix error path: remove erroneous clk_disable_unprepare()
The clocks mcan_class->cclk and mcan_class->hclk are not prepared by any call
during tcan4x5x_can_probe(), so remove erroneous clk_disable_unprepare() on
them.
Fixes:
5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Link: http://lore.kernel.org/r/20201130114252.215334-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Krzysztof Kozlowski [Mon, 26 Oct 2020 15:36:20 +0000 (16:36 +0100)]
dt-bindings: net: correct interrupt flags in examples
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Fixes:
a1a8b4594f8d ("NFC: pn544: i2c: Add DTS Documentation")
Fixes:
6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Fixes:
e3b329221567 ("dt-bindings: can: tcan4x5x: Update binding to use interrupt property")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for tcan4x5x.txt
Link: https://lore.kernel.org/r/20201026153620.89268-1-krzk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 28 Nov 2020 21:26:50 +0000 (13:26 -0800)]
Merge branch 'ibmvnic-assorted-bug-fixes'
Dany Madden says:
====================
ibmvnic: assorted bug fixes
Assorted fixes for ibmvnic originated from "[PATCH net 00/15] ibmvnic:
assorted bug fixes" sent by Lijun Pan.
====================
Link: https://lore.kernel.org/r/20201126000432.29897-1-drt@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dany Madden [Thu, 26 Nov 2020 00:04:32 +0000 (18:04 -0600)]
ibmvnic: reduce wait for completion time
Reduce the wait time for Command Response Queue response from 30 seconds
to 20 seconds, as recommended by VIOS and Power Hypervisor teams.
Fixes:
bd0b672313941 ("ibmvnic: Move login and queue negotiation into ibmvnic_open")
Fixes:
53da09e92910f ("ibmvnic: Add set_link_state routine for setting adapter link state")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dany Madden [Thu, 26 Nov 2020 00:04:31 +0000 (18:04 -0600)]
ibmvnic: no reset timeout for 5 seconds after reset
Reset timeout is going off right after adapter reset. This patch ensures
that timeout is scheduled if it has been 5 seconds since the last reset.
5 seconds is the default watchdog timeout.
Fixes:
ed651a10875f1 ("ibmvnic: Updated reset handling")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dany Madden [Thu, 26 Nov 2020 00:04:30 +0000 (18:04 -0600)]
ibmvnic: send_login should check for crq errors
send_login() does not check for the result of ibmvnic_send_crq() of the
login request. This results in the driver needlessly retrying the login
10 times even when CRQ is no longer active. Check the return code and
give up in case of errors in sending the CRQ.
The only time we want to retry is if we get a PARITALSUCCESS response
from the partner.
Fixes:
032c5e82847a2 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sukadev Bhattiprolu [Thu, 26 Nov 2020 00:04:29 +0000 (18:04 -0600)]
ibmvnic: track pending login
If after ibmvnic sends a LOGIN it gets a FAILOVER, it is possible that
the worker thread will start reset process and free the login response
buffer before it gets a (now stale) LOGIN_RSP. The ibmvnic tasklet will
then try to access the login response buffer and crash.
Have ibmvnic track pending logins and discard any stale login responses.
Fixes:
032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sukadev Bhattiprolu [Thu, 26 Nov 2020 00:04:28 +0000 (18:04 -0600)]
ibmvnic: delay next reset if hard reset fails
If auto-priority failover is enabled, the backing device needs time
to settle if hard resetting fails for any reason. Add a delay of 60
seconds before retrying the hard-reset.
Fixes:
2770a7984db5 ("ibmvnic: Introduce hard reset recovery")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dany Madden [Thu, 26 Nov 2020 00:04:27 +0000 (18:04 -0600)]
ibmvnic: restore adapter state on failed reset
In a failed reset, driver could end up in VNIC_PROBED or VNIC_CLOSED
state and cannot recover in subsequent resets, leaving it offline.
This patch restores the adapter state to reset_state, the original
state when reset was called.
Fixes:
b27507bb59ed5 ("net/ibmvnic: unlock rtnl_lock in reset so linkwatch_event can run")
Fixes:
2770a7984db58 ("ibmvnic: Introduce hard reset recovery")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dany Madden [Thu, 26 Nov 2020 00:04:26 +0000 (18:04 -0600)]
ibmvnic: avoid memset null scrq msgs
scrq->msgs could be NULL during device reset, causing Linux to crash.
So, check before memset scrq->msgs.
Fixes:
c8b2ad0a4a901 ("ibmvnic: Sanitize entire SCRQ buffer on reset")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dany Madden [Thu, 26 Nov 2020 00:04:25 +0000 (18:04 -0600)]
ibmvnic: stop free_all_rwi on failed reset
When ibmvnic fails to reset, it breaks out of the reset loop and frees
all of the remaining resets from the workqueue. Doing so prevents the
adapter from recovering if no reset is scheduled after that. Instead,
have the driver continue to process resets on the workqueue.
Remove the no longer need free_all_rwi().
Fixes:
ed651a10875f1 ("ibmvnic: Updated reset handling")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dany Madden [Thu, 26 Nov 2020 00:04:24 +0000 (18:04 -0600)]
ibmvnic: handle inconsistent login with reset
Inconsistent login with the vnicserver is causing the device to be
removed. This does not give the device a chance to recover from error
state. This patch schedules a FATAL reset instead to bring the adapter
up.
Fixes:
032c5e82847a2 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 28 Nov 2020 21:20:23 +0000 (13:20 -0800)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix insufficient validation of IPSET_ATTR_IPADDR_IPV6 reported
by syzbot.
2) Remove spurious reports on nf_tables when lockdep gets disabled,
from Florian Westphal.
3) Fix memleak in the error path of error path of
ip_vs_control_net_init(), from Wang Hai.
4) Fix missing control data in flow dissector, otherwise IP address
matching in hardware offload infra does not work.
5) Fix hardware offload match on prefix IP address when userspace
does not send a bitwise expression to represent the prefix.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nftables_offload: build mask based from the matching bytes
netfilter: nftables_offload: set address type in control dissector
ipvs: fix possible memory leak in ip_vs_control_net_init
netfilter: nf_tables: avoid false-postive lockdep splat
netfilter: ipset: prevent uninit-value in hash_ip6_add
====================
Link: https://lore.kernel.org/r/20201127190313.24947-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Davide Caratti [Thu, 26 Nov 2020 18:47:47 +0000 (19:47 +0100)]
selftests: tc-testing: enable CONFIG_NET_SCH_RED as a module
a proper kernel configuration for running kselftest can be obtained with:
$ yes | make kselftest-merge
enable compile support for the 'red' qdisc: otherwise, tdc kselftest fail
when trying to run tdc test items contained in red.json.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/cfa23f2d4f672401e6cebca3a321dd1901a9ff07.1606416464.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guillaume Nault [Thu, 26 Nov 2020 18:09:22 +0000 (19:09 +0100)]
ipv4: Fix tos mask in inet_rtm_getroute()
When inet_rtm_getroute() was converted to use the RCU variants of
ip_route_input() and ip_route_output_key(), the TOS parameters
stopped being masked with IPTOS_RT_MASK before doing the route lookup.
As a result, "ip route get" can return a different route than what
would be used when sending real packets.
For example:
$ ip route add 192.0.2.11/32 dev eth0
$ ip route add unreachable 192.0.2.11/32 tos 2
$ ip route get 192.0.2.11 tos 2
RTNETLINK answers: No route to host
But, packets with TOS 2 (ECT(0) if interpreted as an ECN bit) would
actually be routed using the first route:
$ ping -c 1 -Q 2 192.0.2.11
PING 192.0.2.11 (192.0.2.11) 56(84) bytes of data.
64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.173 ms
--- 192.0.2.11 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.173/0.173/0.173/0.000 ms
This patch re-applies IPTOS_RT_MASK in inet_rtm_getroute(), to
return results consistent with real route lookups.
Fixes:
3765d35ed8b9 ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/b2d237d08317ca55926add9654a48409ac1b8f5b.1606412894.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 28 Nov 2020 20:04:56 +0000 (12:04 -0800)]
Merge https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2020-11-28
1) Do not reference the skb for xsk's generic TX side since when looped
back into RX it might crash in generic XDP, from Björn Töpel.
2) Fix umem cleanup on a partially set up xsk socket when being destroyed,
from Magnus Karlsson.
3) Fix an incorrect netdev reference count when failing xsk_bind() operation,
from Marek Majtyka.
4) Fix bpftool to set an error code on failed calloc() in build_btf_type_table(),
from Zhen Lei.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add MAINTAINERS entry for BPF LSM
bpftool: Fix error return value in build_btf_type_table
net, xsk: Avoid taking multiple skbuff references
xsk: Fix incorrect netdev reference count
xsk: Fix umem cleanup bug at socket destruct
MAINTAINERS: Update XDP and AF_XDP entries
====================
Link: https://lore.kernel.org/r/20201128005104.1205-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 28 Nov 2020 19:56:06 +0000 (11:56 -0800)]
Merge tag 'batadv-net-pullrequest-
20201127' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Fix head/tailroom issues for fragments, by Sven Eckelmann (3 patches)
* tag 'batadv-net-pullrequest-
20201127' of git://git.open-mesh.org/linux-merge:
batman-adv: Don't always reallocate the fragmentation skb head
batman-adv: Reserve needed_*room for fragments
batman-adv: Consider fragmentation for needed_headroom
====================
Link: https://lore.kernel.org/r/20201127173849.19208-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Antoine Tenart [Mon, 23 Nov 2020 17:49:02 +0000 (18:49 +0100)]
netfilter: bridge: reset skb->pkt_type after NF_INET_POST_ROUTING traversal
Netfilter changes PACKET_OTHERHOST to PACKET_HOST before invoking the
hooks as, while it's an expected value for a bridge, routing expects
PACKET_HOST. The change is undone later on after hook traversal. This
can be seen with pairs of functions updating skb>pkt_type and then
reverting it to its original value:
For hook NF_INET_PRE_ROUTING:
setup_pre_routing / br_nf_pre_routing_finish
For hook NF_INET_FORWARD:
br_nf_forward_ip / br_nf_forward_finish
But the third case where netfilter does this, for hook
NF_INET_POST_ROUTING, the packet type is changed in br_nf_post_routing
but never reverted. A comment says:
/* We assume any code from br_dev_queue_push_xmit onwards doesn't care
* about the value of skb->pkt_type. */
But when having a tunnel (say vxlan) attached to a bridge we have the
following call trace:
br_nf_pre_routing
br_nf_pre_routing_ipv6
br_nf_pre_routing_finish
br_nf_forward_ip
br_nf_forward_finish
br_nf_post_routing <- pkt_type is updated to PACKET_HOST
br_nf_dev_queue_xmit <- but not reverted to its original value
vxlan_xmit
vxlan_xmit_one
skb_tunnel_check_pmtu <- a check on pkt_type is performed
In this specific case, this creates issues such as when an ICMPv6 PTB
should be sent back. When CONFIG_BRIDGE_NETFILTER is enabled, the PTB
isn't sent (as skb_tunnel_check_pmtu checks if pkt_type is PACKET_HOST
and returns early).
If the comment is right and no one cares about the value of
skb->pkt_type after br_dev_queue_push_xmit (which isn't true), resetting
it to its original value should be safe.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20201123174902.622102-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 27 Nov 2020 23:00:35 +0000 (15:00 -0800)]
Merge tag 'asm-generic-fixes-5.10-2' of git://git./linux/kernel/git/arnd/asm-generic
Pull asm-generic fix from Arnd Bergmann:
"Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic.
This is a single bugfix for a bug that Stefan Agner found on 32-bit
Arm, but that exists on several other architectures"
* tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed
Linus Torvalds [Fri, 27 Nov 2020 22:48:03 +0000 (14:48 -0800)]
Merge tag 'arm-soc-fixes-v5.10-3' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of patches for devicetree files and Arm SoC specific
drivers:
- A fix for OP-TEE shared memory on non-SMP systems
- multiple code fixes for the OMAP platform, including one regression
for the CPSW network driver and a few runtime warning fixes
- Some DT patches for the Rockchip RK3399 platform, in particular
fixing the MMC device ordering that recently became
nondeterministic with async probe.
- Multiple DT fixes for the Tegra platform, including a regression
fix for suspend/resume on TX2
- A regression fix for a user-triggered fault in the NXP dpio driver
- A regression fix for a bug caused by an earlier bug fix in the
xilinx firmware driver
- Two more DTC warning fixes
- Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
platform"
* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: tegra: Fix Tegra234 VDK node names
arm64: tegra: Wrong AON HSP reg property size
arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
arm64: tegra: Correct the UART for Jetson Xavier NX
arm64: tegra: Disable the ACONNECT for Jetson TX2
optee: add writeback to valid memory type
firmware: xilinx: Use hash-table for api feature check
firmware: xilinx: Fix SD DLL node reset issue
soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
MAINTAINERS: Remove myself as LPC32xx maintainers
arm64: dts: qcom: clear the warnings caused by empty dma-ranges
arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
...
Linus Torvalds [Fri, 27 Nov 2020 22:38:02 +0000 (14:38 -0800)]
Merge tag 'net-5.10-rc6' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc6, including fixes from the WiFi driver,
and CAN subtrees.
Current release - regressions:
- gro_cells: reduce number of synchronize_net() calls
- ch_ktls: release a lock before jumping to an error path
Current release - always broken:
- tcp: Allow full IP tos/IPv6 tclass to be reflected in L3 header
Previous release - regressions:
- net/tls: fix missing received data after fast remote close
- vsock/virtio: discard packets only when socket is really closed
- sock: set sk_err to ee_errno on dequeue from errq
- cxgb4: fix the panic caused by non smac rewrite
Previous release - always broken:
- tcp: fix corner cases around setting ECN with BPF selection of
congestion control
- tcp: fix race condition when creating child sockets from syncookies
on loopback interface
- usbnet: ipheth: fix connectivity with iOS 14
- tun: honor IOCB_NOWAIT flag
- net/packet: fix packet receive on L3 devices without visible hard
header
- devlink: Make sure devlink instance and port are in same net
namespace
- net: openvswitch: fix TTL decrement action netlink message format
- bonding: wait for sysfs kobject destruction before freeing struct
slave
- net: stmmac: fix upstream patch applied to the wrong context
- bnxt_en: fix return value and unwind in probe error paths
Misc:
- devlink: add extra layer of categorization to the reload stats uAPI
before it's released"
* tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
sock: set sk_err to ee_errno on dequeue from errq
mptcp: fix NULL ptr dereference on bad MPJ
net: openvswitch: fix TTL decrement action netlink message format
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
can: gs_usb: fix endianess problem with candleLight firmware
ch_ktls: lock is not freed
net/tls: Protect from calling tls_dev_del for TLS RX twice
devlink: Make sure devlink instance and port are in same net namespace
devlink: Hold rtnl lock while reading netdev attributes
ptp: clockmatrix: bug fix for idtcm_strverscmp
enetc: Let the hardware auto-advance the taprio base-time of 0
gro_cells: reduce number of synchronize_net() calls
net: stmmac: fix incorrect merge of patch upstream
ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init
Documentation: netdev-FAQ: suggest how to post co-dependent series
ibmvnic: enhance resetting status check during module exit
...
Linus Torvalds [Fri, 27 Nov 2020 22:06:23 +0000 (14:06 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes in the UFS driver: two are for power management
issues and the third is to fix a slew of problem in the sysfs code"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: Fix race between shutdown and runtime resume flow
scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE
scsi: ufs: Fix unexpected values from ufshcd_read_desc_param()
Linus Torvalds [Fri, 27 Nov 2020 20:56:04 +0000 (12:56 -0800)]
Merge tag 'io_uring-5.10-2020-11-27' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Out of bounds fix for the cq size cap from earlier this release (Joseph)
- iov_iter type check fix (Pavel)
- Files grab + cancelation fix (Pavel)
* tag 'io_uring-5.10-2020-11-27' of git://git.kernel.dk/linux-block:
io_uring: fix files grab/cancel race
io_uring: fix ITER_BVEC check
io_uring: fix shift-out-of-bounds when round up cq size
Linus Torvalds [Fri, 27 Nov 2020 20:49:01 +0000 (12:49 -0800)]
Merge tag 'block-5.10-2020-11-27' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Just a single fix, for a crash in the keyslot manager"
* tag 'block-5.10-2020-11-27' of git://git.kernel.dk/linux-block:
block/keyslot-manager: prevent crash when num_slots=1
Linus Torvalds [Fri, 27 Nov 2020 20:42:13 +0000 (12:42 -0800)]
Merge tag 'for-5.10-rc5-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few fixes for various warnings that accumulated over past two weeks:
- tree-checker: add missing return values for some errors
- lockdep fixes
- when reading qgroup config and starting quota rescan
- reverse order of quota ioctl lock and VFS freeze lock
- avoid accessing potentially stale fs info during device scan,
reported by syzbot
- add scope NOFS protection around qgroup relation changes
- check for running transaction before flushing qgroups
- fix tracking of new delalloc ranges for some cases"
* tag 'for-5.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix lockdep splat when enabling and disabling qgroups
btrfs: do nofs allocations when adding and removing qgroup relations
btrfs: fix lockdep splat when reading qgroup config on mount
btrfs: tree-checker: add missing returns after data_ref alignment checks
btrfs: don't access possibly stale fs_info data for printing duplicate device
btrfs: tree-checker: add missing return after error in root_item
btrfs: qgroup: don't commit transaction when we already hold the handle
btrfs: fix missing delalloc new bit for new delalloc ranges
Linus Torvalds [Fri, 27 Nov 2020 20:31:04 +0000 (12:31 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Two security issues and several small bug fixes. Things seem to have
stabilized for this release here.
Summary:
- Significant out of bounds access security issue in i40iw
- Fix misuse of mmu notifiers in hfi1
- Several errors in the register map/usage in hns
- Missing error returns in mthca"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Bugfix for memory window mtpt configuration
RDMA/hns: Fix retry_cnt and rnr_cnt when querying QP
RDMA/hns: Fix wrong field of SRQ number the device supports
IB/hfi1: Ensure correct mm is used at all times
RDMA/i40iw: Address an mmap handler exploit in i40iw
IB/mthca: fix return value of error branch in mthca_init_cq()
Linus Torvalds [Fri, 27 Nov 2020 20:03:07 +0000 (12:03 -0800)]
Merge tag 'mtd/fixes-for-5.10-rc6' of git://git./linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Because of a recent change in the core, NAND controller drivers
initializing the ECC engine too early in the probe path are broken.
Drivers should wait for the NAND device to be discovered and its
memory layout known before doing any ECC related initialization, so
instead of reverting the faulty change which is actually moving in the
right direction, let's fix the drivers directly: socrates, sharpsl,
r852, plat_nand, pasemi, tmio, txx9ndfmc, orion, mpc5121, lpc32xx_slc,
lpc32xx_mlc, fsmc, diskonchip, davinci, cs553x, au1550, ams-delta,
xway and gpio"
* tag 'mtd/fixes-for-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: socrates: Move the ECC initialization to ->attach_chip()
mtd: rawnand: sharpsl: Move the ECC initialization to ->attach_chip()
mtd: rawnand: r852: Move the ECC initialization to ->attach_chip()
mtd: rawnand: plat_nand: Move the ECC initialization to ->attach_chip()
mtd: rawnand: pasemi: Move the ECC initialization to ->attach_chip()
mtd: rawnand: tmio: Move the ECC initialization to ->attach_chip()
mtd: rawnand: txx9ndfmc: Move the ECC initialization to ->attach_chip()
mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()
mtd: rawnand: mpc5121: Move the ECC initialization to ->attach_chip()
mtd: rawnand: lpc32xx_slc: Move the ECC initialization to ->attach_chip()
mtd: rawnand: lpc32xx_mlc: Move the ECC initialization to ->attach_chip()
mtd: rawnand: fsmc: Move the ECC initialization to ->attach_chip()
mtd: rawnand: diskonchip: Move the ECC initialization to ->attach_chip()
mtd: rawnand: davinci: Move the ECC initialization to ->attach_chip()
mtd: rawnand: cs553x: Move the ECC initialization to ->attach_chip()
mtd: rawnand: au1550: Move the ECC initialization to ->attach_chip()
mtd: rawnand: ams-delta: Move the ECC initialization to ->attach_chip()
mtd: rawnand: xway: Move the ECC initialization to ->attach_chip()
mtd: rawnand: gpio: Move the ECC initialization to ->attach_chip()
Linus Torvalds [Fri, 27 Nov 2020 19:29:53 +0000 (11:29 -0800)]
Merge tag 'spi-fix-v5.10-rc5' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few fixes for v5.10, one for the core which fixes some potential
races for controllers with multiple chip selects when configuration of
the chip select for one client device races with the addition and
initial setup of an additional client"
* tag 'spi-fix-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dw: Fix spi registration for controllers overriding CS
spi: imx: fix the unbalanced spi runtime pm management
spi: spi-nxp-fspi: fix fspi panic by unexpected interrupts
spi: Take the SPI IO-mutex in the spi_setup() method
Linus Torvalds [Fri, 27 Nov 2020 19:25:23 +0000 (11:25 -0800)]
Merge tag 'media/v5.10-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull virtual digital TV driver fixes from Mauro Carvalho Chehab:
"A series of fixes for the new virtual digital TV driver (vidtv), which
is meant to help doing tests with the digital TV core and media
userspace apps and libraries.
They cover a series of issues I found on it, together with a few new
things in order to make it easier to detect problems at the DVB core"
* tag 'media/v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (36 commits)
media: vidtv.rst: add kernel-doc markups
media: vidtv.rst: update vidtv documentation
media: vidtv: simplify EIT write function
media: vidtv: simplify NIT write function
media: vidtv: simplify SDT write function
media: vidtv: cleanup PMT write table function
media: vidtv: cleanup PAT write function
media: vidtv: cleanup PSI table header function
media: vidtv: cleanup PSI descriptor write function
media: vidtv: simplify the crc writing logic
media: vidtv: simplify PSI write function
media: vidtv: add date to the current event
media: vidtv: fix service_id at SDT table
media: vidtv: fix service type
media: vidtv: add a PID entry for the NIT table
media: vidtv: properly fill EIT service_id
media: vidtv: fix the network ID range
media: vidtv: improve EIT data
media: vidtv: cleanup null packet initialization logic
media: vidtv: pre-initialize mux arrays
...
Linus Torvalds [Fri, 27 Nov 2020 19:19:49 +0000 (11:19 -0800)]
Merge tag 'drm-fixes-2020-11-27-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Unfortunately this has a bit of thanksgiving stuffing in it, as it a
bit larger (at least the vc4 patches) than I like at this point in
time.
The main thing is it has a bunch of regressions fixes for reports in
the last couple of weeks, ast, nouveau and the amdgpu ttm init fix,
along with the usual selection of amdgpu and i915 fixes.
The vc4 fixes are a few but they are fixes and the nastiest one is a
fix for when you have a 2.4Ghz Wifi and a HDMI signal with a clock in
that range and there isn't enough shielding and interference happen
between the two, the fix adjusts the mode clock to try and avoid the
wifi channels in that case.
Hopefully you can merge this between turkey slices, and next week
should be quieter.
ast:
- LUT loading regression fix
nouveau:
- relocations regression fix
amdgpu:
- ttm init oops fix
- Runtime pm fix
- SI UVD suspend/resume fix
- HDCP fix for headless cards
- Sienna Cichlid golden register update
i915:
- Fix Perf/OA workaround register corruption (Lionel)
- Correct a comment statement in GVT (Yan)
- Fix GT enable/disable iterrupts, including a race condition that
prevented GPU to go idle (Chris)
- Free stale request on destroying the virtual engine (Chris)
exynos:
- config dependency fix
mediatek:
- unused var removal
- horizonal front/back porch formula fix
vc4:
- wifi and hdmi interference fix
- mode rejection fixes
- use after free fix
- cleanup some code"
* tag 'drm-fixes-2020-11-27-1' of git://anongit.freedesktop.org/drm/drm: (28 commits)
drm/nouveau: fix relocations applying logic and a double-free
drm/ast: Reload gamma LUT after changing primary plane's color format
drm/amdgpu: Fix size calculation when init onchip memory
drm/amdgpu: update golden setting for sienna_cichlid
drm/amd/display: Avoid HDCP initialization in devices without output
drm/i915/gt: Free stale request on destroying the virtual engine
drm/i915/gt: Don't cancel the interrupt shadow too early
drm/i915/gt: Track signaled breadcrumbs outside of the breadcrumb spinlock
drm/amdgpu: fix a page fault
drm/amdgpu: fix SI UVD firmware validate resume fail
drm/amd/amdgpu: fix null pointer in runtime pm
drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission
drm/i915/gvt: correct a false comment of flag F_UNALIGN
drm/i915/perf: workaround register corruption in OATAILPTR
drm/vc4: kms: Don't disable the muxing of an active CRTC
drm/vc4: kms: Store the unassigned channel list in the state
drm/exynos: depend on COMMON_CLK to fix compile tests
drm/mediatek: dsi: Modify horizontal front/back porch byte formula
drm/vc4: hdmi: Disable Wifi Frequencies
dt-bindings: display: Add a property to deal with WiFi coexistence
...
Jakub Kicinski [Fri, 27 Nov 2020 19:13:39 +0000 (11:13 -0800)]
Merge tag 'linux-can-fixes-for-5.10-
20201127' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2020-11-27
The first patch is by me and target the gs_usb driver and fixes the endianess
problem with candleLight firmware.
Another patch by me for the mcp251xfd driver add sanity checking to bail out if
no IRQ is configured.
The next three patches target the m_can driver. A patch by me removes the
hardcoded IRQF_TRIGGER_FALLING from the request_threaded_irq() as this clashes
with the trigger level specified in the DT. Further a patch by me fixes the
nominal bitiming tseg2 min value for modern m_can cores. Pankaj Sharma's patch
add support for cores version 3.3.x.
The last patch by Oliver Hartkopp is for af_can and converts a WARN() into a
pr_warn(), which is triggered by the syzkaller. It was able to create a
situation where the closing of a socket runs simultaneously to the notifier
call chain for removing the CAN network device in use.
* tag 'linux-can-fixes-for-5.10-
20201127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
can: gs_usb: fix endianess problem with candleLight firmware
====================
Link: https://lore.kernel.org/r/20201127100301.512603-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 27 Nov 2020 19:09:13 +0000 (11:09 -0800)]
Merge tag 'platform-drivers-x86-v5.10-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- thinkpad_acpi fixes: two bug-fixes and three model specific quirks
- fixes for misc other drivers: two bug-fixes and three model specific
quirks
* tag 'platform-drivers-x86-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the Irbis TW118 tablet
platform/x86: touchscreen_dmi: Add info for the Predia Basic tablet
platform/x86: intel-vbtn: Support for tablet mode on HP Pavilion 13 x360 PC
platform/x86: toshiba_acpi: Fix the wrong variable assignment
platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE
platform/x86: thinkpad_acpi: Whitelist P15 firmware for dual fan control
platform/x86: thinkpad_acpi: Send tablet mode switch at wakeup time
platform/x86: thinkpad_acpi: Add BAT1 is primary battery quirk for Thinkpad Yoga 11e 4th gen
platform/x86: thinkpad_acpi: Do not report SW_TABLET_MODE on Yoga 11e
platform/x86: thinkpad_acpi: add P1 gen3 second fan support
Willem de Bruijn [Thu, 26 Nov 2020 15:12:20 +0000 (10:12 -0500)]
sock: set sk_err to ee_errno on dequeue from errq
When setting sk_err, set it to ee_errno, not ee_origin.
Commit
f5f99309fa74 ("sock: do not set sk_err in
sock_dequeue_err_skb") disabled updating sk_err on errq dequeue,
which is correct for most error types (origins):
- sk->sk_err = err;
Commit
38b257938ac6 ("sock: reset sk_err when the error queue is
empty") reenabled the behavior for IMCP origins, which do require it:
+ if (icmp_next)
+ sk->sk_err = SKB_EXT_ERR(skb_next)->ee.ee_origin;
But read from ee_errno.
Fixes:
38b257938ac6 ("sock: reset sk_err when the error queue is empty")
Reported-by: Ayush Ranjan <ayushranjan@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20201126151220.2819322-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Thu, 26 Nov 2020 14:17:53 +0000 (15:17 +0100)]
mptcp: fix NULL ptr dereference on bad MPJ
If an msk listener receives an MPJ carrying an invalid token, it
will zero the request socket msk entry. That should later
cause fallback and subflow reset - as per RFC - at
subflow_syn_recv_sock() time due to failing hmac validation.
Since commit
4cf8b7e48a09 ("subflow: introduce and use
mptcp_can_accept_new_subflow()"), we unconditionally dereference
- in mptcp_can_accept_new_subflow - the subflow request msk
before performing hmac validation. In the above scenario we
hit a NULL ptr dereference.
Address the issue doing the hmac validation earlier.
Fixes:
4cf8b7e48a09 ("subflow: introduce and use mptcp_can_accept_new_subflow()")
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/03b2cfa3ac80d8fc18272edc6442a9ddf0b1e34e.1606400227.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 27 Nov 2020 19:04:13 +0000 (11:04 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix alignment of the new HYP sections
- Fix GICR_TYPER access from userspace
S390:
- do not reset the global diag318 data for per-cpu reset
- do not mark memory as protected too early
- fix for destroy page ultravisor call
x86:
- fix for SEV debugging
- fix incorrect return code
- fix for 'noapic' with PIC in userspace and LAPIC in kernel
- fix for 5-level paging"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: x86/mmu: Fix get_mmio_spte() on CPUs supporting 5-level PT
KVM: x86: Fix split-irqchip vs interrupt injection window request
KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extint
MAINTAINERS: Update email address for Sean Christopherson
MAINTAINERS: add uv.c also to KVM/s390
s390/uv: handle destroy page legacy interface
KVM: arm64: vgic-v3: Drop the reporting of GICR_TYPER.Last for userspace
KVM: SVM: fix error return code in svm_create_vcpu()
KVM: SVM: Fix offset computation bug in __sev_dbg_decrypt().
KVM: arm64: Correctly align nVHE percpu data
KVM: s390: remove diag318 reset code
KVM: s390: pv: Mark mm as protected after the set secure parameters and improve cleanup
Eelco Chaudron [Tue, 24 Nov 2020 12:34:44 +0000 (07:34 -0500)]
net: openvswitch: fix TTL decrement action netlink message format
Currently, the openvswitch module is not accepting the correctly formated
netlink message for the TTL decrement action. For both setting and getting
the dec_ttl action, the actions should be nested in the
OVS_DEC_TTL_ATTR_ACTION attribute as mentioned in the openvswitch.h uapi.
When the original patch was sent, it was tested with a private OVS userspace
implementation. This implementation was unfortunately not upstreamed and
reviewed, hence an erroneous version of this patch was sent out.
Leaving the patch as-is would cause problems as the kernel module could
interpret additional attributes as actions and vice-versa, due to the
actions not being encapsulated/nested within the actual attribute, but
being concatinated after it.
Fixes:
744676e77720 ("openvswitch: add TTL decrement action")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/160622121495.27296.888010441924340582.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 27 Nov 2020 18:59:02 +0000 (10:59 -0800)]
Merge tag 'powerpc-5.10-4' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.10:
- regression fix for a boot failure on some 32-bit machines.
- fix for host crashes in the KVM system reset handling.
- fix for a possible oops in the KVM XIVE interrupt handling on
Power9.
- fix for host crashes triggerable via the KVM emulated MMIO handling
when running HPT guests.
- a couple of small build fixes.
Thanks to Andreas Schwab, Cédric Le Goater, Christophe Leroy, Erhard
Furtner, Greg Kurz, Greg Kurz, Németh Márton, Nicholas Piggin, Nick
Desaulniers, Serge Belyshev, and Stephen Rothwell"
* tag 'powerpc-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Fix allnoconfig build since uaccess flush
powerpc/64s/exception: KVM Fix for host DSI being taken in HPT guest MMU context
powerpc: Drop -me200 addition to build flags
KVM: PPC: Book3S HV: XIVE: Fix possible oops when accessing ESB page
powerpc/64s: Fix KVM system reset handling when CONFIG_PPC_PSERIES=y
powerpc/32s: Use relocation offset when setting early hash table
Linus Torvalds [Fri, 27 Nov 2020 18:44:59 +0000 (10:44 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main changes are relating to our handling of access/dirty bits,
where our low-level page-table helpers could lead to stale young
mappings and loss of the dirty bit in some cases (the latter has not
been observed in practice, but could happen when clearing "soft-dirty"
if we enabled that). These were posted as part of a larger series, but
the rest of that is less urgent and needs a v2 which I'll get to
shortly.
In other news, we've now got a set of fixes to resolve the
lockdep/tracing problems that have been plaguing us for a while, but
they're still a bit "fresh" and I plan to send them to you next week
after we've got some more confidence in them (although initial CI
results look good).
Summary:
- Fix kerneldoc warnings generated by ACPI IORT code
- Fix pte_accessible() so that access flag is ignored
- Fix missing header #include
- Fix loss of software dirty bit across pte_wrprotect() when HW DBM
is enabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()
arm64: pgtable: Fix pte_accessible()
ACPI/IORT: Fix doc warnings in iort.c
arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build
Linus Torvalds [Fri, 27 Nov 2020 18:41:19 +0000 (10:41 -0800)]
Merge tag 'iommu-fixes' of git://git./linux/kernel/git/arm64/linux
Pull iommu fixes from Will Deacon:
"Here's another round of IOMMU fixes for -rc6 consisting mainly of a
bunch of independent driver fixes. Thomas agreed for me to take the
x86 'tboot' fix here, as it fixes a regression introduced by a vt-d
change.
- Fix intel iommu driver when running on devices without VCCAP_REG
- Fix swiotlb and "iommu=pt" interaction under TXT (tboot)
- Fix missing return value check during device probe()
- Fix probe ordering for Qualcomm SMMU implementation
- Ensure page-sized mappings are used for AMD IOMMU buffers with SNP
RMP"
* tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
iommu/vt-d: Don't read VCCAP register unless it exists
x86/tboot: Don't disable swiotlb when iommu is forced on
iommu: Check return of __iommu_attach_device()
arm-smmu-qcom: Ensure the qcom_scm driver has finished probing
iommu/amd: Enforce 4k mapping for certain IOMMU data structures
Linus Torvalds [Fri, 27 Nov 2020 18:38:36 +0000 (10:38 -0800)]
Merge tag 'printk-for-5.10-rc6-fixup' of git://git./linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- do not lose trailing newline in pr_cont() calls
- two trivial fixes for a dead store and a config description
* tag 'printk-for-5.10-rc6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: finalize records with trailing newlines
printk: remove unneeded dead-store assignment
init/Kconfig: Fix CPU number in LOG_CPU_MAX_BUF_SHIFT description
Linus Torvalds [Fri, 27 Nov 2020 18:36:38 +0000 (10:36 -0800)]
Merge tag 'writeback_for_v5.10-rc6' of git://git./linux/kernel/git/jack/linux-fs
Pull writeback fix from Jan Kara:
"A fix of possible missing string termination in writeback tracepoints"
* tag 'writeback_for_v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
trace: fix potenial dangerous pointer
Arnd Bergmann [Fri, 27 Nov 2020 16:45:45 +0000 (17:45 +0100)]
Merge tag 'optee-valid-memory-type-for-v5.11' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
Add writeback to valid OP-TEE shared memory types
Allows OP-TEE to work with ARMv7 based single CPU systems by allowing
writeback cache policy for shared memory.
* tag 'optee-valid-memory-type-for-v5.11' of git://git.linaro.org/people/jens.wiklander/linux-tee:
optee: add writeback to valid memory type
Link: https://lore.kernel.org/r/20201125120134.GA1642471@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Vitaly Kuznetsov [Thu, 26 Nov 2020 11:02:06 +0000 (12:02 +0100)]
kvm: x86/mmu: Fix get_mmio_spte() on CPUs supporting 5-level PT
Commit
95fb5b0258b7 ("kvm: x86/mmu: Support MMIO in the TDP MMU") caused
the following WARNING on an Intel Ice Lake CPU:
get_mmio_spte: detect reserved bits on spte, addr 0xb80a0, dump hierarchy:
------ spte 0xb80a0 level 5.
------ spte 0xfcd210107 level 4.
------ spte 0x1004c40107 level 3.
------ spte 0x1004c41107 level 2.
------ spte 0x1db00000000b83b6 level 1.
WARNING: CPU: 109 PID: 10254 at arch/x86/kvm/mmu/mmu.c:3569 kvm_mmu_page_fault.cold.150+0x54/0x22f [kvm]
...
Call Trace:
? kvm_io_bus_get_first_dev+0x55/0x110 [kvm]
vcpu_enter_guest+0xaa1/0x16a0 [kvm]
? vmx_get_cs_db_l_bits+0x17/0x30 [kvm_intel]
? skip_emulated_instruction+0xaa/0x150 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xca/0x520 [kvm]
The guest triggering this crashes. Note, this happens with the traditional
MMU and EPT enabled, not with the newly introduced TDP MMU. Turns out,
there was a subtle change in the above mentioned commit. Previously,
walk_shadow_page_get_mmio_spte() was setting 'root' to 'iterator.level'
which is returned by shadow_walk_init() and this equals to
'vcpu->arch.mmu->shadow_root_level'. Now, get_mmio_spte() sets it to
'int root = vcpu->arch.mmu->root_level'.
The difference between 'root_level' and 'shadow_root_level' on CPUs
supporting 5-level page tables is that in some case we don't want to
use 5-level, in particular when 'cpuid_maxphyaddr(vcpu) <= 48'
kvm_mmu_get_tdp_level() returns '4'. In case upper layer is not used,
the corresponding SPTE will fail '__is_rsvd_bits_set()' check.
Revert to using 'shadow_root_level'.
Fixes:
95fb5b0258b7 ("kvm: x86/mmu: Support MMIO in the TDP MMU")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20201126110206.
2118959-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 27 Nov 2020 08:18:20 +0000 (09:18 +0100)]
KVM: x86: Fix split-irqchip vs interrupt injection window request
kvm_cpu_accept_dm_intr and kvm_vcpu_ready_for_interrupt_injection are
a hodge-podge of conditions, hacked together to get something that
more or less works. But what is actually needed is much simpler;
in both cases the fundamental question is, do we have a place to stash
an interrupt if userspace does KVM_INTERRUPT?
In userspace irqchip mode, that is !vcpu->arch.interrupt.injected.
Currently kvm_event_needs_reinjection(vcpu) covers it, but it is
unnecessarily restrictive.
In split irqchip mode it's a bit more complicated, we need to check
kvm_apic_accept_pic_intr(vcpu) (the IRQ window exit is basically an INTACK
cycle and thus requires ExtINTs not to be masked) as well as
!pending_userspace_extint(vcpu). However, there is no need to
check kvm_event_needs_reinjection(vcpu), since split irqchip keeps
pending ExtINT state separate from event injection state, and checking
kvm_cpu_has_interrupt(vcpu) is wrong too since ExtINT has higher
priority than APIC interrupts. In fact the latter fixes a bug:
when userspace requests an IRQ window vmexit, an interrupt in the
local APIC can cause kvm_cpu_has_interrupt() to be true and thus
kvm_vcpu_ready_for_interrupt_injection() to return false. When this
happens, vcpu_run does not exit to userspace but the interrupt window
vmexits keep occurring. The VM loops without any hope of making progress.
Once we try to fix these with something like
return kvm_arch_interrupt_allowed(vcpu) &&
- !kvm_cpu_has_interrupt(vcpu) &&
- !kvm_event_needs_reinjection(vcpu) &&
- kvm_cpu_accept_dm_intr(vcpu);
+ (!lapic_in_kernel(vcpu)
+ ? !vcpu->arch.interrupt.injected
+ : (kvm_apic_accept_pic_intr(vcpu)
+ && !pending_userspace_extint(v)));
we realize two things. First, thanks to the previous patch the complex
conditional can reuse !kvm_cpu_has_extint(vcpu). Second, the interrupt
window request in vcpu_enter_guest()
bool req_int_win =
dm_request_for_irq_injection(vcpu) &&
kvm_cpu_accept_dm_intr(vcpu);
should be kept in sync with kvm_vcpu_ready_for_interrupt_injection():
it is unnecessary to ask the processor for an interrupt window
if we would not be able to return to userspace. Therefore,
kvm_cpu_accept_dm_intr(vcpu) is basically !kvm_cpu_has_extint(vcpu)
ANDed with the existing check for masked ExtINT. It all makes sense:
- we can accept an interrupt from userspace if there is a place
to stash it (and, for irqchip split, ExtINTs are not masked).
Interrupts from userspace _can_ be accepted even if right now
EFLAGS.IF=0.
- in order to tell userspace we will inject its interrupt ("IRQ
window open" i.e. kvm_vcpu_ready_for_interrupt_injection), both
KVM and the vCPU need to be ready to accept the interrupt.
... and this is what the patch implements.
Reported-by: David Woodhouse <dwmw@amazon.co.uk>
Analyzed-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Paolo Bonzini [Fri, 27 Nov 2020 07:53:52 +0000 (08:53 +0100)]
KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extint
Centralize handling of interrupts from the userspace APIC
in kvm_cpu_has_extint and kvm_cpu_get_extint, since
userspace APIC interrupts are handled more or less the
same as ExtINTs are with split irqchip. This removes
duplicated code from kvm_cpu_has_injectable_intr and
kvm_cpu_has_interrupt, and makes the code more similar
between kvm_cpu_has_{extint,interrupt} on one side
and kvm_cpu_get_{extint,interrupt} on the other.
Cc: stable@vger.kernel.org
Reviewed-by: Filippo Sironi <sironi@amazon.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 27 Nov 2020 14:17:13 +0000 (09:17 -0500)]
Merge tag 'kvmarm-fixes-5.10-4' of git://git./linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for v5.10, take #4
- Fix alignment of the new HYP sections
- Fix GICR_TYPER access from userspace
Petr Mladek [Fri, 27 Nov 2020 12:41:23 +0000 (13:41 +0100)]
Merge branch 'for-5.10-pr_cont-fixup' into for-linus
Arnd Bergmann [Fri, 27 Nov 2020 12:18:40 +0000 (13:18 +0100)]
Merge tag 'omap-for-v5.10/fixes-rc5-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for various issues noticed during the -rc cycle:
- Earlier omap4 cpuidle fix was incomplete and needs to use a
configured idle state instead
- Fix am4 cpsw driver compatible to avoid invalid resource error
for the legacy driver
- Two kconfig fixes for genpd support that we added for for v5.10
for proper location of the option and adding missing option
- Fix ti-sysc reset status checking on enabling modules to ignore
quirky modules with reset status only usable when the quirk is
activated during reset. Also fix bogus resetdone warning for
cpsw and modules with no sysst register reset status bit
- Suppress a ti-sysc warning for timers reserved as system timers
- Fix the ordering of clocks for dra7 m_can
* tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw
bus: ti-sysc: Fix reset status check for modules with quirks
ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF
ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS
Link: https://lore.kernel.org/r/pull-1606460270-864284@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pablo Neira Ayuso [Wed, 25 Nov 2020 22:50:17 +0000 (23:50 +0100)]
netfilter: nftables_offload: build mask based from the matching bytes
Userspace might match on prefix bytes of header fields if they are on
the byte boundary, this requires that the mask is adjusted accordingly.
Use NFT_OFFLOAD_MATCH_EXACT() for meta since prefix byte matching is not
allowed for this type of selector.
The bitwise expression might be optimized out by userspace, hence the
kernel needs to infer the prefix from the number of payload bytes to
match on. This patch adds nft_payload_offload_mask() to calculate the
bitmask to match on the prefix.
Fixes:
c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Wed, 25 Nov 2020 22:50:07 +0000 (23:50 +0100)]
netfilter: nftables_offload: set address type in control dissector
This patch adds nft_flow_rule_set_addr_type() to set the address type
from the nft_payload expression accordingly.
If the address type is not set in the control dissector then a rule that
matches either on source or destination IP address does not work.
After this patch, nft hardware offload generates the flow dissector
configuration as tc-flower does to match on an IP address.
This patch has been also tested functionally to make sure packets are
filtered out by the NIC.
This is also getting the code aligned with the existing netfilter flow
offload infrastructure which is also setting the control dissector.
Fixes:
c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Wang Hai [Tue, 24 Nov 2020 08:07:49 +0000 (16:07 +0800)]
ipvs: fix possible memory leak in ip_vs_control_net_init
kmemleak report a memory leak as follows:
BUG: memory leak
unreferenced object 0xffff8880759ea000 (size 256):
backtrace:
[<
00000000c0bf2deb>] kmem_cache_zalloc include/linux/slab.h:656 [inline]
[<
00000000c0bf2deb>] __proc_create+0x23d/0x7d0 fs/proc/generic.c:421
[<
000000009d718d02>] proc_create_reg+0x8e/0x140 fs/proc/generic.c:535
[<
0000000097bbfc4f>] proc_create_net_data+0x8c/0x1b0 fs/proc/proc_net.c:126
[<
00000000652480fc>] ip_vs_control_net_init+0x308/0x13a0 net/netfilter/ipvs/ip_vs_ctl.c:4169
[<
000000004c927ebe>] __ip_vs_init+0x211/0x400 net/netfilter/ipvs/ip_vs_core.c:2429
[<
00000000aa6b72d9>] ops_init+0xa8/0x3c0 net/core/net_namespace.c:151
[<
00000000153fd114>] setup_net+0x2de/0x7e0 net/core/net_namespace.c:341
[<
00000000be4e4f07>] copy_net_ns+0x27d/0x530 net/core/net_namespace.c:482
[<
00000000f1c23ec9>] create_new_namespaces+0x382/0xa30 kernel/nsproxy.c:110
[<
00000000098a5757>] copy_namespaces+0x2e6/0x3b0 kernel/nsproxy.c:179
[<
0000000026ce39e9>] copy_process+0x220a/0x5f00 kernel/fork.c:2072
[<
00000000b71f4efe>] _do_fork+0xc7/0xda0 kernel/fork.c:2428
[<
000000002974ee96>] __do_sys_clone3+0x18a/0x280 kernel/fork.c:2703
[<
0000000062ac0a4d>] do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
[<
0000000093f1ce2c>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
In the error path of ip_vs_control_net_init(), remove_proc_entry() needs
to be called to remove the added proc entry, otherwise a memory leak
will occur.
Also, add some '#ifdef CONFIG_PROC_FS' because proc_create_net* return NULL
when PROC is not used.
Fixes:
b17fc9963f83 ("IPVS: netns, ip_vs_stats and its procfs")
Fixes:
61b1ab4583e2 ("IPVS: netns, add basic init per netns.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
John Ogness [Thu, 26 Nov 2020 11:48:36 +0000 (12:54 +0106)]
printk: finalize records with trailing newlines
Any record with a trailing newline (LOG_NEWLINE flag) cannot
be continued because the newline has been stripped and will
not be visible if the message is appended. This was already
handled correctly when committing in log_output() but was
not handled correctly when committing in log_store().
Fixes:
f5f022e53b87 ("printk: reimplement log_cont using record extension")
Link: https://lore.kernel.org/r/20201126114836.14750-1-john.ogness@linutronix.de
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Oliver Hartkopp [Thu, 26 Nov 2020 19:21:40 +0000 (20:21 +0100)]
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
To detect potential bugs in CAN protocol implementations (double removal of
receiver entries) a WARN() statement has been used if no matching list item was
found for removal.
The fault injection issued by syzkaller was able to create a situation where
the closing of a socket runs simultaneously to the notifier call chain for
removing the CAN network device in use.
This case is very unlikely in real life but it doesn't break anything.
Therefore we just replace the WARN() statement with pr_warn() to preserve the
notification for the CAN protocol development.
Reported-by: syzbot+381d06e0c8eaacb8706f@syzkaller.appspotmail.com
Reported-by: syzbot+d0ddd88c9a7432f041e6@syzkaller.appspotmail.com
Reported-by: syzbot+76d62d3b8162883c7d11@syzkaller.appspotmail.com
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20201126192140.14350-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pankaj Sharma [Thu, 26 Nov 2020 04:51:42 +0000 (10:21 +0530)]
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
Add support for mcan bit timing and control mode according to bosch mcan IP
version 3.3.0. The mcan version read from the Core Release field of CREL
register would be 33. Accordingly the properties are to be set for mcan v3.3.0
Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com>
Link: https://lore.kernel.org/r/1606366302-5520-1-git-send-email-pankj.sharma@samsung.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Tue, 24 Nov 2020 18:47:38 +0000 (19:47 +0100)]
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
At lest the revision 3.3.0 of the bosch m_can IP core specifies that valid
register values for "Nominal Time segment after sample point (NTSEG2)" are from
1 to 127. As the hardware uses a value of one more than the programmed value,
mean tseg2_min is 2.
This patch fixes the tseg2_min value accordingly.
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Mario Huettel <mario.huettel@gmx.net>
Acked-by: Sriram Dash <sriram.dash@samsung.com>
Link: https://lore.kernel.org/r/20201124190751.3972238-1-mkl@pengutronix.de
Fixes:
b03cfc5bb0e1 ("can: m_can: Enable M_CAN version dependent initialization")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Fri, 27 Nov 2020 07:35:12 +0000 (08:35 +0100)]
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
The threaded IRQ handler is used for the tcan4x5x driver only. The IRQ pin of
the tcan4x5x controller is active low, so better not use IRQF_TRIGGER_FALLING
when requesting the IRQ. As this can result in missing interrupts.
Further, if the device tree specified the interrupt as "IRQ_TYPE_LEVEL_LOW",
unloading and reloading of the driver results in the following error during
ifup:
| irq: type mismatch, failed to map hwirq-31 for gpio@
20a8000!
| tcan4x5x spi1.1: m_can device registered (irq=0, version=32)
| tcan4x5x spi1.1 can2: TCAN4X5X successfully initialized.
| tcan4x5x spi1.1 can2: failed to request interrupt
This patch fixes the problem by removing the IRQF_TRIGGER_FALLING from the
request_threaded_irq().
Fixes:
f524f829b75a ("can: m_can: Create a m_can platform framework")
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Sriram Dash <sriram.dash@samsung.com>
Cc: Pankaj Sharma <pankj.sharma@samsung.com>
Link: https://lore.kernel.org/r/20201127093548.509253-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Sven Eckelmann [Thu, 26 Nov 2020 17:24:49 +0000 (18:24 +0100)]
batman-adv: Don't always reallocate the fragmentation skb head
When a packet is fragmented by batman-adv, the original batman-adv header
is not modified. Only a new fragmentation is inserted between the original
one and the ethernet header. The code must therefore make sure that it has
a writable region of this size in the skbuff head.
But it is not useful to always reallocate the skbuff by this size even when
there would be more than enough headroom still in the skb. The reallocation
is just to costly during in this codepath.
Fixes:
ee75ed88879a ("batman-adv: Fragment and send skbs larger than mtu")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Sven Eckelmann [Wed, 25 Nov 2020 12:16:43 +0000 (13:16 +0100)]
batman-adv: Reserve needed_*room for fragments
The batadv net_device is trying to propagate the needed_headroom and
needed_tailroom from the lower devices. This is needed to avoid cost
intensive reallocations using pskb_expand_head during the transmission.
But the fragmentation code split the skb's without adding extra room at the
end/beginning of the various fragments. This reduced the performance of
transmissions over complex scenarios (batadv on vxlan on wireguard) because
the lower devices had to perform the reallocations at least once.
Fixes:
ee75ed88879a ("batman-adv: Fragment and send skbs larger than mtu")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Sven Eckelmann [Thu, 26 Nov 2020 17:15:06 +0000 (18:15 +0100)]
batman-adv: Consider fragmentation for needed_headroom
If a batman-adv packets has to be fragmented, then the original batman-adv
packet header is not stripped away. Instead, only a new header is added in
front of the packet after it was split.
This size must be considered to avoid cost intensive reallocations during
the transmission through the various device layers.
Fixes:
7bca68c7844b ("batman-adv: Add lower layer needed_(head|tail)room to own ones")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Dave Airlie [Thu, 26 Nov 2020 23:39:39 +0000 (09:39 +1000)]
Merge tag 'drm-misc-fixes-2020-11-26' of ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes
A bunch of fixes for vc4 fixing some coexistence issue between wifi and
HDMI, unsupported modes, and vblank timeouts, a fix for ast to reload
the gamma LUT after changing the plane format and a double-free fix for
nouveau
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201126085450.r3i7wvj7pizsa4l6@gilmour
Dave Airlie [Thu, 26 Nov 2020 23:37:01 +0000 (09:37 +1000)]
Merge tag 'mediatek-drm-fixes-5.10' of https://git./linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes for Linux 5.10
1. Remove unused variable.
2. Modify horizontal front/back porch byte formula.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201123234131.387-1-chunkuang.hu@kernel.org
Dave Airlie [Thu, 26 Nov 2020 23:21:10 +0000 (09:21 +1000)]
Merge tag 'exynos-drm-fixes-for-v5.10-rc6' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes
One bug fix
. Add COMMON_CLK dependency to fix a build error below,
/usr/bin/mips-linux-gnu-ld: drivers/gpu/drm/exynos/exynos_mixer.o: in function `mixer_bind':
exynos_mixer.c:(.text+0x958): undefined reference to `clk_set_parent'
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1606184478-23384-1-git-send-email-inki.dae@samsung.com
Arnd Bergmann [Thu, 26 Nov 2020 21:08:01 +0000 (22:08 +0100)]
Merge tag 'tegra-for-5.10-arm64-dt-fixes' of git://git./linux/kernel/git/tegra/linux into arm/fixes
arm64: tegra: Device tree fixes for v5.10-rc6
This contains a couple of fixes to device trees. Among other things,
this restores suspend/resume on Jetson TX2 and makes USB OTG work on
Jetson TX1.
* tag 'tegra-for-5.10-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Fix Tegra234 VDK node names
arm64: tegra: Wrong AON HSP reg property size
arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
arm64: tegra: Correct the UART for Jetson Xavier NX
arm64: tegra: Disable the ACONNECT for Jetson TX2
Link: https://lore.kernel.org/r/20201125170306.1095734-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 26 Nov 2020 21:07:21 +0000 (22:07 +0100)]
Merge tag 'soc-fsl-fix-v5.10' of git://git./linux/kernel/git/leo/linux into arm/fixes
NXP/FSL SoC driver fix for 5.10
DPAA2 DPIO driver
- Fix non-static cpumask for irq affinity setting
* tag 'soc-fsl-fix-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
Link: https://lore.kernel.org/r/20201125165922.15487-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>