OSDN Git Service
Jane Wan [Tue, 8 May 2018 21:19:53 +0000 (14:19 -0700)]
mtd: rawnand: fsl_ifc: fix FSL NAND driver to read all ONFI parameter pages
[ Upstream commit
a75bbe71a27875fdc61cde1af6d799037cef6bed ]
Per ONFI specification (Rev. 4.0), if the CRC of the first parameter page
read is not valid, the host should read redundant parameter page copies.
Fix FSL NAND driver to read the two redundant copies which are mandatory
in the specification.
Signed-off-by: Jane Wan <Jane.Wan@nokia.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brad Love [Fri, 4 May 2018 21:53:35 +0000 (17:53 -0400)]
media: saa7164: Fix driver name in debug output
[ Upstream commit
0cc4655cb57af0b7e105d075c4f83f8046efafe7 ]
This issue was reported by a user who downloaded a corrupt saa7164
firmware, then went looking for a valid xc5000 firmware to fix the
error displayed...but the device in question has no xc5000, thus after
much effort, the wild goose chase eventually led to a support call.
The xc5000 has nothing to do with saa7164 (as far as I can tell),
so replace the string with saa7164 as well as give a meaningful
hint on the firmware mismatch.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Damien Le Moal [Wed, 9 May 2018 00:28:12 +0000 (09:28 +0900)]
libata: Fix command retry decision
[ Upstream commit
804689ad2d9b66d0d3920b48cf05881049d44589 ]
For failed commands with valid sense data (e.g. NCQ commands),
scsi_check_sense() is used in ata_analyze_tf() to determine if the
command can be retried. In such case, rely on this decision and ignore
the command error mask based decision done in ata_worth_retry().
This fixes useless retries of commands such as unaligned writes on zoned
disks (TYPE_ZAC).
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Tue, 12 Jul 2016 11:21:46 +0000 (07:21 -0400)]
media: rcar_jpu: Add missing clk_disable_unprepare() on error in jpu_open()
[ Upstream commit
43d0d3c52787df0221d1c52494daabd824fe84f1 ]
Add the missing clk_disable_unprepare() before return from
jpu_open() in the software reset error handling case.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Tue, 8 May 2018 12:14:33 +0000 (13:14 +0100)]
dma-iommu: Fix compilation when !CONFIG_IOMMU_DMA
[ Upstream commit
8a22a3e1e768c309b718f99bd86f9f25a453e0dc ]
Inclusion of include/dma-iommu.h when CONFIG_IOMMU_DMA is not selected
results in the following splat:
In file included from drivers/irqchip/irq-gic-v3-mbi.c:20:0:
./include/linux/dma-iommu.h:95:69: error: unknown type name ‘dma_addr_t’
static inline int iommu_get_msi_cookie(struct iommu_domain *domain, dma_addr_t base)
^~~~~~~~~~
./include/linux/dma-iommu.h:108:74: warning: ‘struct list_head’ declared inside parameter list will not be visible outside of this definition or declaration
static inline void iommu_dma_get_resv_regions(struct device *dev, struct list_head *list)
^~~~~~~~~
scripts/Makefile.build:312: recipe for target 'drivers/irqchip/irq-gic-v3-mbi.o' failed
Fix it by including linux/types.h.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lkml.kernel.org/r/20180508121438.11301-5-marc.zyngier@arm.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DaeRyong Jeong [Mon, 30 Apr 2018 15:27:04 +0000 (00:27 +0900)]
tty: Fix data race in tty_insert_flip_string_fixed_flag
[ Upstream commit
b6da31b2c07c46f2dcad1d86caa835227a16d9ff ]
Unlike normal serials, in pty layer, there is no guarantee that multiple
threads don't insert input characters at the same time. If it is happened,
tty_insert_flip_string_fixed_flag can be executed concurrently. This can
lead slab out-of-bounds write in tty_insert_flip_string_fixed_flag.
Call sequences are as follows.
CPU0 CPU1
n_tty_ioctl_helper n_tty_ioctl_helper
__start_tty tty_send_xchar
tty_wakeup pty_write
n_hdlc_tty_wakeup tty_insert_flip_string
n_hdlc_send_frames tty_insert_flip_string_fixed_flag
pty_write
tty_insert_flip_string
tty_insert_flip_string_fixed_flag
To fix the race, acquire port->lock in pty_write() before it inserts input
characters to tty buffer. It prevents multiple threads from inserting
input characters concurrently.
The crash log is as follows:
BUG: KASAN: slab-out-of-bounds in tty_insert_flip_string_fixed_flag+0xb5/
0x130 drivers/tty/tty_buffer.c:316 at addr
ffff880114fcc121
Write of size 1792 by task syz-executor0/30017
CPU: 1 PID: 30017 Comm: syz-executor0 Not tainted 4.8.0 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS
rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
0000000000000000 ffff88011638f888 ffffffff81694cc3 ffff88007d802140
ffff880114fcb300 ffff880114fcc300 ffff880114fcb300 ffff88011638f8b0
ffffffff8130075c ffff88011638f940 ffff88007d802140 ffff880194fcc121
Call Trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0xb3/0x110 lib/dump_stack.c:51
kasan_object_err+0x1c/0x70 mm/kasan/report.c:156
print_address_description mm/kasan/report.c:194 [inline]
kasan_report_error+0x1f7/0x4e0 mm/kasan/report.c:283
kasan_report+0x36/0x40 mm/kasan/report.c:303
check_memory_region_inline mm/kasan/kasan.c:292 [inline]
check_memory_region+0x13e/0x1a0 mm/kasan/kasan.c:299
memcpy+0x37/0x50 mm/kasan/kasan.c:335
tty_insert_flip_string_fixed_flag+0xb5/0x130 drivers/tty/tty_buffer.c:316
tty_insert_flip_string include/linux/tty_flip.h:35 [inline]
pty_write+0x7f/0xc0 drivers/tty/pty.c:115
n_hdlc_send_frames+0x1d4/0x3b0 drivers/tty/n_hdlc.c:419
n_hdlc_tty_wakeup+0x73/0xa0 drivers/tty/n_hdlc.c:496
tty_wakeup+0x92/0xb0 drivers/tty/tty_io.c:601
__start_tty.part.26+0x66/0x70 drivers/tty/tty_io.c:1018
__start_tty+0x34/0x40 drivers/tty/tty_io.c:1013
n_tty_ioctl_helper+0x146/0x1e0 drivers/tty/tty_ioctl.c:1138
n_hdlc_tty_ioctl+0xb3/0x2b0 drivers/tty/n_hdlc.c:794
tty_ioctl+0xa85/0x16d0 drivers/tty/tty_io.c:2992
vfs_ioctl fs/ioctl.c:43 [inline]
do_vfs_ioctl+0x13e/0xba0 fs/ioctl.c:679
SYSC_ioctl fs/ioctl.c:694 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685
entry_SYSCALL_64_fastpath+0x1f/0xbd
Signed-off-by: DaeRyong Jeong <threeearcat@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Torokhov [Wed, 9 May 2018 19:12:15 +0000 (12:12 -0700)]
HID: i2c-hid: check if device is there before really probing
[ Upstream commit
b3a81b6c4fc6730ac49e20d789a93c0faabafc98 ]
On many Chromebooks touch devices are multi-sourced; the components are
electrically compatible and one can be freely swapped for another without
changing the OS image or firmware.
To avoid bunch of scary messages when device is not actually present in the
system let's try testing basic communication with it and if there is no
response terminate probe early with -ENXIO.
Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Neuschäfer [Thu, 10 May 2018 21:59:19 +0000 (23:59 +0200)]
powerpc/embedded6xx/hlwd-pic: Prevent interrupts from being handled by Starlet
[ Upstream commit
9dcb3df4281876731e4e8bff7940514d72375154 ]
The interrupt controller inside the Wii's Hollywood chip is connected to
two masters, the "Broadway" PowerPC and the "Starlet" ARM926, each with
their own interrupt status and mask registers.
When booting the Wii with mini[1], interrupts from the SD card
controller (IRQ 7) are handled by the ARM, because mini provides SD
access over IPC. Linux however can't currently use or disable this IPC
service, so both sides try to handle IRQ 7 without coordination.
Let's instead make sure that all interrupts that are unmasked on the PPC
side are masked on the ARM side; this will also make sure that Linux can
properly talk to the SD card controller (and potentially other devices).
If access to a device through IPC is desired in the future, interrupts
from that device should not be handled by Linux directly.
[1]: https://github.com/lewurm/mini
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luc Van Oostenryck [Tue, 24 Apr 2018 13:15:13 +0000 (15:15 +0200)]
drm/radeon: fix mode_valid's return type
[ Upstream commit
7a47f20eb1fb8fa8d7a8fe3a4fd8c721f04c2174 ]
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Terry Junge [Mon, 30 Apr 2018 20:32:46 +0000 (13:32 -0700)]
HID: hid-plantronics: Re-resend Update to map button for PTT products
[ Upstream commit
37e376df5f4993677c33968a0c19b0c5acbf1108 ]
Add a mapping for Push-To-Talk joystick trigger button.
Tested on ChromeBox/ChromeBook with various Plantronics devices.
Signed-off-by: Terry Junge <terry.junge@plantronics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 16 May 2018 18:07:18 +0000 (20:07 +0200)]
ALSA: usb-audio: Apply rate limit to warning messages in URB complete callback
[ Upstream commit
377a879d9832f4ba69bd6a1fc996bb4181b1e504 ]
retire_capture_urb() may print warning messages when the given URB
doesn't align, and this may flood the system log easily.
Put the rate limit to the message for avoiding it.
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=
1093485
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Wed, 25 Apr 2018 15:04:21 +0000 (11:04 -0400)]
media: smiapp: fix timeout checking in smiapp_read_nvm
[ Upstream commit
7a2148dfda8001c983f0effd9afd8a7fa58e99c4 ]
The current code decrements the timeout counter i and the end of
each loop i is incremented, so the check for timeout will always
be false and hence the timeout mechanism is just a dead code path.
Potentially, if the RD_READY bit is not set, we could end up in
an infinite loop.
Fix this so the timeout starts from 1000 and decrements to zero,
if at the end of the loop i is zero we have a timeout condition.
Detected by CoverityScan, CID#
1324008 ("Logically dead code")
Fixes:
ccfc97bdb5ae ("[media] smiapp: Add driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yufen Yu [Fri, 4 May 2018 10:08:10 +0000 (18:08 +0800)]
md: fix NULL dereference of mddev->pers in remove_and_add_spares()
[ Upstream commit
c42a0e2675721e1444f56e6132a07b7b1ec169ac ]
We met NULL pointer BUG as follow:
[ 151.760358] BUG: unable to handle kernel NULL pointer dereference at
0000000000000060
[ 151.761340] PGD
80000001011eb067 P4D
80000001011eb067 PUD
1011ea067 PMD 0
[ 151.762039] Oops: 0000 [#1] SMP PTI
[ 151.762406] Modules linked in:
[ 151.762723] CPU: 2 PID: 3561 Comm: mdadm-test Kdump: loaded Not tainted 4.17.0-rc1+ #238
[ 151.763542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014
[ 151.764432] RIP: 0010:remove_and_add_spares.part.56+0x13c/0x3a0
[ 151.765061] RSP: 0018:
ffffc90001d7fcd8 EFLAGS:
00010246
[ 151.765590] RAX:
0000000000000000 RBX:
ffff88013601d600 RCX:
0000000000000000
[ 151.766306] RDX:
0000000000000000 RSI:
ffff88013601d600 RDI:
ffff880136187000
[ 151.767014] RBP:
ffff880136187018 R08:
0000000000000003 R09:
0000000000000051
[ 151.767728] R10:
ffffc90001d7fed8 R11:
0000000000000000 R12:
ffff88013601d600
[ 151.768447] R13:
ffff8801298b1300 R14:
ffff880136187000 R15:
0000000000000000
[ 151.769160] FS:
00007f2624276700(0000) GS:
ffff88013ae80000(0000) knlGS:
0000000000000000
[ 151.769971] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 151.770554] CR2:
0000000000000060 CR3:
0000000111aac000 CR4:
00000000000006e0
[ 151.771272] Call Trace:
[ 151.771542] md_ioctl+0x1df2/0x1e10
[ 151.771906] ? __switch_to+0x129/0x440
[ 151.772295] ? __schedule+0x244/0x850
[ 151.772672] blkdev_ioctl+0x4bd/0x970
[ 151.773048] block_ioctl+0x39/0x40
[ 151.773402] do_vfs_ioctl+0xa4/0x610
[ 151.773770] ? dput.part.23+0x87/0x100
[ 151.774151] ksys_ioctl+0x70/0x80
[ 151.774493] __x64_sys_ioctl+0x16/0x20
[ 151.774877] do_syscall_64+0x5b/0x180
[ 151.775258] entry_SYSCALL_64_after_hwframe+0x44/0xa9
For raid6, when two disk of the array are offline, two spare disks can
be added into the array. Before spare disks recovery completing,
system reboot and mdadm thinks it is ok to restart the degraded
array by md_ioctl(). Since disks in raid6 is not only_parity(),
raid5_run() will abort, when there is no PPL feature or not setting
'start_dirty_degraded' parameter. Therefore, mddev->pers is NULL.
But, mddev->raid_disks has been set and it will not be cleared when
raid5_run abort. md_ioctl() can execute cmd 'HOT_REMOVE_DISK' to
remove a disk by mdadm, which will cause NULL pointer dereference
in remove_and_add_spares() finally.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anson Huang [Thu, 17 May 2018 07:27:22 +0000 (15:27 +0800)]
regulator: pfuze100: add .is_enable() for pfuze100_swb_regulator_ops
[ Upstream commit
0b01fd3d40fe6402e5fa3b491ef23109feb1aaa5 ]
If is_enabled() is not defined, regulator core will assume
this regulator is already enabled, then it can NOT be really
enabled after disabled.
Based on Li Jun's patch from the NXP kernel tree.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 17 May 2018 18:02:23 +0000 (20:02 +0200)]
ALSA: emu10k1: Rate-limit error messages about page errors
[ Upstream commit
11d42c81036324697d367600bfc16f6dd37636fd ]
The error messages at sanity checks of memory pages tend to repeat too
many times once when it hits, and without the rate limit, it may flood
and become unreadable. Replace such messages with the *_ratelimited()
variant.
Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=
1093027
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maya Erez [Thu, 3 May 2018 11:07:16 +0000 (16:37 +0530)]
scsi: ufs: fix exception event handling
[ Upstream commit
2e3611e9546c2ed4def152a51dfd34e8dddae7a5 ]
The device can set the exception event bit in one of the response UPIU,
for example to notify the need for urgent BKOPs operation. In such a
case, the host driver calls ufshcd_exception_event_handler to handle
this notification. When trying to check the exception event status (for
finding the cause for the exception event), the device may be busy with
additional SCSI commands handling and may not respond within the 100ms
timeout.
To prevent that, we need to block SCSI commands during handling of
exception events and allow retransmissions of the query requests, in
case of timeout.
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xinming Hu [Fri, 18 May 2018 07:38:54 +0000 (15:38 +0800)]
mwifiex: correct histogram data with appropriate index
[ Upstream commit
30bfce0b63fa68c14ae1613eb9d259fa18644074 ]
Correct snr/nr/rssi data index to avoid possible buffer underflow.
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Westerberg [Wed, 23 May 2018 22:19:22 +0000 (17:19 -0500)]
PCI: pciehp: Request control of native hotplug only if supported
[ Upstream commit
408fec36a1ab3d14273c2116b449ef1e9be3cb8b ]
Currently we request control of native PCIe hotplug unconditionally.
Native PCIe hotplug events are handled by the pciehp driver, and if it is
not enabled those events will be lost.
Request control of native PCIe hotplug only if the pciehp driver is
enabled, so we will actually handle native PCIe hotplug events.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julia Lawall [Wed, 23 May 2018 19:07:12 +0000 (21:07 +0200)]
pinctrl: at91-pio4: add missing of_node_put
[ Upstream commit
21816364715f508c10da1e087e352bc1e326614f ]
The device node iterators perform an of_node_get on each iteration, so a
jump out of the loop requires an of_node_put.
The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@
for_each_child_of_node(root, child) {
... when != of_node_put(child)
when != e = child
+ of_node_put(child);
? break;
...
}
... when != child
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Leroy [Thu, 24 May 2018 11:02:06 +0000 (11:02 +0000)]
powerpc/8xx: fix invalid register expression in head_8xx.S
[ Upstream commit
e4ccb1dae6bdef228d729c076c38161ef6e7ca34 ]
New binutils generate the following warning
AS arch/powerpc/kernel/head_8xx.o
arch/powerpc/kernel/head_8xx.S: Assembler messages:
arch/powerpc/kernel/head_8xx.S:916: Warning: invalid register expression
This patch fixes it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathieu Malaterre [Wed, 4 Apr 2018 20:07:46 +0000 (22:07 +0200)]
powerpc/powermac: Mark variable x as unused
[ Upstream commit
5a4b475cf8511da721f20ba432c244061db7139f ]
Since the value of x is never intended to be read, declare it with gcc
attribute as unused. Fix warning treated as error with W=1:
arch/powerpc/platforms/powermac/bootx_init.c:471:21: error: variable ‘x’ set but not used [-Werror=unused-but-set-variable]
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathieu Malaterre [Wed, 4 Apr 2018 20:13:05 +0000 (22:13 +0200)]
powerpc/powermac: Add missing prototype for note_bootable_part()
[ Upstream commit
f72cf3f1d49f2c35d6cb682af2e8c93550f264e4 ]
Add a missing prototype for function `note_bootable_part` to silence a
warning treated as error with W=1:
arch/powerpc/platforms/powermac/setup.c:361:12: error: no previous prototype for ‘note_bootable_part’ [-Werror=missing-prototypes]
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathieu Malaterre [Thu, 22 Mar 2018 20:19:56 +0000 (21:19 +0100)]
powerpc/chrp/time: Make some functions static, add missing header include
[ Upstream commit
b87a358b4a1421abd544c0b554b1b7159b2b36c0 ]
Add a missing include <platforms/chrp/chrp.h>.
These functions can all be static, make it so. Fix warnings treated as
errors with W=1:
arch/powerpc/platforms/chrp/time.c:41:13: error: no previous prototype for ‘chrp_time_init’ [-Werror=missing-prototypes]
arch/powerpc/platforms/chrp/time.c:66:5: error: no previous prototype for ‘chrp_cmos_clock_read’ [-Werror=missing-prototypes]
arch/powerpc/platforms/chrp/time.c:74:6: error: no previous prototype for ‘chrp_cmos_clock_write’ [-Werror=missing-prototypes]
arch/powerpc/platforms/chrp/time.c:86:5: error: no previous prototype for ‘chrp_set_rtc_time’ [-Werror=missing-prototypes]
arch/powerpc/platforms/chrp/time.c:130:6: error: no previous prototype for ‘chrp_get_rtc_time’ [-Werror=missing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathieu Malaterre [Thu, 22 Mar 2018 20:20:03 +0000 (21:20 +0100)]
powerpc/32: Add a missing include header
[ Upstream commit
c89ca593220931c150cffda24b4d4ccf82f13fc8 ]
The header file <linux/syscalls.h> was missing from the includes. Fix the
following warning, treated as error with W=1:
arch/powerpc/kernel/pci_32.c:286:6: error: no previous prototype for ‘sys_pciconfig_iobase’ [-Werror=missing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Eckelmann [Wed, 23 May 2018 08:09:53 +0000 (11:09 +0300)]
ath: Add regulatory mapping for Bahamas
[ Upstream commit
699e2302c286a14afe7b7394151ce6c4e1790cc1 ]
The country code is used by the ath to detect the ISO 3166-1 alpha-2 name
and to select the correct conformance test limits (CTL) for a country. If
the country isn't available and it is still programmed in the EEPROM then
it will cause an error and stop the initialization with:
Invalid EEPROM contents
The current CTL mappings for this country are:
* 2.4GHz: ETSI
* 5GHz: FCC
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Eckelmann [Wed, 23 May 2018 08:09:59 +0000 (11:09 +0300)]
ath: Add regulatory mapping for Bermuda
[ Upstream commit
9c790f2d234f65697e3b0948adbfdf36dbe63dd7 ]
The country code is used by the ath to detect the ISO 3166-1 alpha-2 name
and to select the correct conformance test limits (CTL) for a country. If
the country isn't available and it is still programmed in the EEPROM then
it will cause an error and stop the initialization with:
Invalid EEPROM contents
The current CTL mappings for this country are:
* 2.4GHz: FCC
* 5GHz: FCC
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Eckelmann [Wed, 23 May 2018 08:10:43 +0000 (11:10 +0300)]
ath: Add regulatory mapping for Serbia
[ Upstream commit
2a3169a54bb53717928392a04fb84deb765b51f1 ]
The country code is used by the ath to detect the ISO 3166-1 alpha-2 name
and to select the correct conformance test limits (CTL) for a country. If
the country isn't available and it is still programmed in the EEPROM then
it will cause an error and stop the initialization with:
Invalid EEPROM contents
The current CTL mappings for this country are:
* 2.4GHz: ETSI
* 5GHz: ETSI
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Eckelmann [Wed, 23 May 2018 08:10:48 +0000 (11:10 +0300)]
ath: Add regulatory mapping for Tanzania
[ Upstream commit
667ddac5745fb9fddfe8f7fd2523070f50bd4442 ]
The country code is used by the ath to detect the ISO 3166-1 alpha-2 name
and to select the correct conformance test limits (CTL) for a country. If
the country isn't available and it is still programmed in the EEPROM then
it will cause an error and stop the initialization with:
Invalid EEPROM contents
The current CTL mappings for this country are:
* 2.4GHz: ETSI
* 5GHz: FCC
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Eckelmann [Wed, 23 May 2018 08:10:54 +0000 (11:10 +0300)]
ath: Add regulatory mapping for Uganda
[ Upstream commit
1ea3986ad2bc72081c69f3fbc1e5e0eeb3c44f17 ]
The country code is used by the ath to detect the ISO 3166-1 alpha-2 name
and to select the correct conformance test limits (CTL) for a country. If
the country isn't available and it is still programmed in the EEPROM then
it will cause an error and stop the initialization with:
Invalid EEPROM contents
The current CTL mappings for this country are:
* 2.4GHz: ETSI
* 5GHz: FCC
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Eckelmann [Wed, 23 May 2018 08:11:05 +0000 (11:11 +0300)]
ath: Add regulatory mapping for APL2_FCCA
[ Upstream commit
4f183687e3fad3ce0e06e38976cad81bc4541990 ]
The regdomain code is used to select the correct the correct conformance
test limits (CTL) for a country. If the regdomain code isn't available and
it is still programmed in the EEPROM then it will cause an error and stop
the initialization with:
Invalid EEPROM contents
The current CTL mappings for this regdomain code are:
* 2.4GHz: FCC
* 5GHz: FCC
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Eckelmann [Wed, 23 May 2018 08:11:14 +0000 (11:11 +0300)]
ath: Add regulatory mapping for APL13_WORLD
[ Upstream commit
9ba8df0c52b3e6baa436374b429d3d73bd09a320 ]
The regdomain code is used to select the correct the correct conformance
test limits (CTL) for a country. If the regdomain code isn't available and
it is still programmed in the EEPROM then it will cause an error and stop
the initialization with:
Invalid EEPROM contents
The current CTL mappings for this regdomain code are:
* 2.4GHz: ETSI
* 5GHz: ETSI
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Eckelmann [Wed, 23 May 2018 08:11:18 +0000 (11:11 +0300)]
ath: Add regulatory mapping for ETSI8_WORLD
[ Upstream commit
45faf6e096da8bb80e1ddf8c08a26a9601d9469e ]
The regdomain code is used to select the correct the correct conformance
test limits (CTL) for a country. If the regdomain code isn't available and
it is still programmed in the EEPROM then it will cause an error and stop
the initialization with:
Invalid EEPROM contents
The current CTL mappings for this regdomain code are:
* 2.4GHz: ETSI
* 5GHz: ETSI
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Eckelmann [Wed, 23 May 2018 08:11:30 +0000 (11:11 +0300)]
ath: Add regulatory mapping for FCC3_ETSIC
[ Upstream commit
01fb2994a98dc72c8818c274f7b5983d5dd885c7 ]
The regdomain code is used to select the correct the correct conformance
test limits (CTL) for a country. If the regdomain code isn't available and
it is still programmed in the EEPROM then it will cause an error and stop
the initialization with:
Invalid EEPROM contents
The current CTL mappings for this regdomain code are:
* 2.4GHz: ETSI
* 5GHz: FCC
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig [Fri, 18 May 2018 16:56:24 +0000 (18:56 +0200)]
PCI: Prevent sysfs disable of device while driver is attached
[ Upstream commit
6f5cdfa802733dcb561bf664cc89d203f2fd958f ]
Manipulating the enable_cnt behind the back of the driver will wreak
complete havoc with the kernel state, so disallow it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qu Wenruo [Mon, 14 May 2018 01:38:13 +0000 (09:38 +0800)]
btrfs: qgroup: Finish rescan when hit the last leaf of extent tree
[ Upstream commit
ff3d27a048d926b3920ccdb75d98788c567cae0d ]
Under the following case, qgroup rescan can double account cowed tree
blocks:
In this case, extent tree only has one tree block.
-
| transid=5 last committed=4
| btrfs_qgroup_rescan_worker()
| |- btrfs_start_transaction()
| | transid = 5
| |- qgroup_rescan_leaf()
| |- btrfs_search_slot_for_read() on extent tree
| Get the only extent tree block from commit root (transid = 4).
| Scan it, set qgroup_rescan_progress to the last
| EXTENT/META_ITEM + 1
| now qgroup_rescan_progress = A + 1.
|
| fs tree get CoWed, new tree block is at A + 16K
| transid 5 get committed
-
| transid=6 last committed=5
| btrfs_qgroup_rescan_worker()
| btrfs_qgroup_rescan_worker()
| |- btrfs_start_transaction()
| | transid = 5
| |- qgroup_rescan_leaf()
| |- btrfs_search_slot_for_read() on extent tree
| Get the only extent tree block from commit root (transid = 5).
| scan it using qgroup_rescan_progress (A + 1).
| found new tree block beyong A, and it's fs tree block,
| account it to increase qgroup numbers.
-
In above case, tree block A, and tree block A + 16K get accounted twice,
while qgroup rescan should stop when it already reach the last leaf,
other than continue using its qgroup_rescan_progress.
Such case could happen by just looping btrfs/017 and with some
possibility it can hit such double qgroup accounting problem.
Fix it by checking the path to determine if we should finish qgroup
rescan, other than relying on next loop to exit.
Reported-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Sterba [Tue, 24 Apr 2018 12:53:56 +0000 (14:53 +0200)]
btrfs: add barriers to btrfs_sync_log before log_commit_wait wakeups
[ Upstream commit
3d3a2e610ea5e7c6d4f9481ecce5d8e2d8317843 ]
Currently the code assumes that there's an implied barrier by the
sequence of code preceding the wakeup, namely the mutex unlock.
As Nikolay pointed out:
I think this is wrong (not your code) but the original assumption that
the RELEASE semantics provided by mutex_unlock is sufficient.
According to memory-barriers.txt:
Section 'LOCK ACQUISITION FUNCTIONS' states:
(2) RELEASE operation implication:
Memory operations issued before the RELEASE will be completed before the
RELEASE operation has completed.
Memory operations issued after the RELEASE *may* be completed before the
RELEASE operation has completed.
(I've bolded the may portion)
The example given there:
As an example, consider the following:
*A = a;
*B = b;
ACQUIRE
*C = c;
*D = d;
RELEASE
*E = e;
*F = f;
The following sequence of events is acceptable:
ACQUIRE, {*F,*A}, *E, {*C,*D}, *B, RELEASE
So if we assume that *C is modifying the flag which the waitqueue is checking,
and *E is the actual wakeup, then those accesses can be re-ordered...
IMHO this code should be considered broken...
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Mon, 21 May 2018 12:43:02 +0000 (08:43 -0400)]
media: videobuf2-core: don't call memop 'finish' when queueing
[ Upstream commit
90b2da89a083e1395cb322521a42397c49ae4500 ]
When a buffer is queued or requeued in vb2_buffer_done, then don't
call the finish memop. In this case the buffer is only returned to vb2,
not to userspace.
Calling 'finish' here will cause an unbalance when the queue is
canceled, since the core will call the same memop again.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eyal Reizer [Mon, 28 May 2018 08:36:42 +0000 (11:36 +0300)]
wlcore: sdio: check for valid platform device data before suspend
[ Upstream commit
6e91d48371e79862ea2c05867aaebe4afe55a865 ]
the wl pointer can be null In case only wlcore_sdio is probed while
no WiLink module is successfully probed, as in the case of mounting a
wl12xx module while using a device tree file configured with wl18xx
related settings.
In this case the system was crashing in wl1271_suspend() as platform
device data is not set.
Make sure wl the pointer is valid before using it.
Signed-off-by: Eyal Reizer <eyalr@ti.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ganapathi Bhat [Thu, 24 May 2018 13:48:27 +0000 (19:18 +0530)]
mwifiex: handle race during mwifiex_usb_disconnect
[ Upstream commit
b817047ae70c0bd67b677b65d0d69d72cd6e9728 ]
Race condition is observed during rmmod of mwifiex_usb:
1. The rmmod thread will call mwifiex_usb_disconnect(), download
SHUTDOWN command and do wait_event_interruptible_timeout(),
waiting for response.
2. The main thread will handle the response and will do a
wake_up_interruptible(), unblocking rmmod thread.
3. On getting unblocked, rmmod thread will make rx_cmd.urb = NULL in
mwifiex_usb_free().
4. The main thread will try to resubmit rx_cmd.urb in
mwifiex_usb_submit_rx_urb(), which is NULL.
To fix, wait for main thread to complete before calling
mwifiex_usb_free().
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vincent Palatin [Wed, 18 Apr 2018 10:23:58 +0000 (12:23 +0200)]
mfd: cros_ec: Fail early if we cannot identify the EC
[ Upstream commit
0dbbf25561b29ffab5ba6277429760abdf49ceff ]
If we cannot communicate with the EC chip to detect the protocol version
and its features, it's very likely useless to continue. Else we will
commit all kind of uninformed mistakes (using the wrong protocol, the
wrong buffer size, mixing the EC with other chips).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kai Chieh Chuang [Mon, 28 May 2018 02:18:18 +0000 (10:18 +0800)]
ASoC: dpcm: fix BE dai not hw_free and shutdown
[ Upstream commit
9c0ac70ad24d76b873c1551e27790c7f6a815d5c ]
In case, one BE is used by two FE1/FE2
FE1--->BE-->
|
FE2----]
when FE1/FE2 call dpcm_be_dai_hw_free() together
the BE users will be 2 (> 1), hence cannot be hw_free
the be state will leave at, ex. SND_SOC_DPCM_STATE_STOP
later FE1/FE2 call dpcm_be_dai_shutdown(),
will be skip due to wrong state.
leaving the BE not being hw_free and shutdown.
The BE dai will be hw_free later when calling
dpcm_be_dai_shutdown() if still in invalid state.
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jian-Hong Pan [Mon, 21 May 2018 10:09:20 +0000 (18:09 +0800)]
Bluetooth: btusb: Add a new Realtek 8723DE ID 2ff8:b011
[ Upstream commit
66d9975c5a7c40aa7e4bb0ec0b0c37ba1f190923 ]
Without this patch we cannot turn on the Bluethooth adapter on ASUS
E406MA.
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2ff8 ProdID=b011 Rev= 2.00
S: Manufacturer=Realtek
S: Product=802.11n WLAN Adapter
S: SerialNumber=
00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thierry Escande [Tue, 29 May 2018 16:37:16 +0000 (18:37 +0200)]
Bluetooth: hci_qca: Fix "Sleep inside atomic section" warning
[ Upstream commit
9960521c44a5d828f29636ceac0600603ecbddbf ]
This patch fixes the following warning during boot:
do not call blocking ops when !TASK_RUNNING; state=1 set at
[<(ptrval)>] qca_setup+0x194/0x750 [hci_uart]
WARNING: CPU: 2 PID: 1878 at kernel/sched/core.c:6135
__might_sleep+0x7c/0x88
In qca_set_baudrate(), the current task state is set to
TASK_UNINTERRUPTIBLE before going to sleep for 300ms. It was then
restored to TASK_INTERRUPTIBLE. This patch sets the current task state
back to TASK_RUNNING instead.
Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shaul Triebitz [Thu, 22 Mar 2018 12:14:45 +0000 (14:14 +0200)]
iwlwifi: pcie: fix race in Rx buffer allocator
[ Upstream commit
0f22e40053bd5378ad1e3250e65c574fd61c0cd6 ]
Make sure the rx_allocator worker is canceled before running the
rx_init routine. rx_init frees and re-allocates all rxb's pages. The
rx_allocator worker also allocates pages for the used rxb's. Running
rx_init and rx_allocator simultaniously causes a kernel panic. Fix
that by canceling the work in rx_init.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kan Liang [Thu, 3 May 2018 18:25:07 +0000 (11:25 -0700)]
perf/x86/intel/uncore: Correct fixed counter index check for NHM
[ Upstream commit
d71f11c076c420c4e2fceb4faefa144e055e0935 ]
For Nehalem and Westmere, there is only one fixed counter for W-Box.
There is no index which is bigger than UNCORE_PMC_IDX_FIXED.
It is not correct to use >= to check fixed counter.
The code quality issue will bring problem when new counter index is
introduced.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1525371913-10597-2-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kan Liang [Thu, 3 May 2018 18:25:08 +0000 (11:25 -0700)]
perf/x86/intel/uncore: Correct fixed counter index check in generic code
[ Upstream commit
4749f8196452eeb73cf2086a6a9705bae479d33d ]
There is no index which is bigger than UNCORE_PMC_IDX_FIXED. The only
exception is client IMC uncore, which has been specially handled.
For generic code, it is not correct to use >= to check fixed counter.
The code quality issue will bring problem when a new counter index is
introduced.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1525371913-10597-3-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan (Samsung OSG) [Tue, 29 May 2018 22:13:03 +0000 (16:13 -0600)]
usbip: usbip_detach: Fix memory, udev context and udev leak
[ Upstream commit
d179f99a651685b19333360e6558110da2fe9bd7 ]
detach_port() fails to call usbip_vhci_driver_close() from its error
path after usbip_vhci_detach_device() returns failure, leaking memory
allocated in usbip_vhci_driver_open() and holding udev_context and udev
references. Fix it to call usbip_vhci_driver_close().
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Sat, 26 May 2018 10:03:34 +0000 (18:03 +0800)]
f2fs: fix to don't trigger writeback during recovery
[ Upstream commit
64c74a7ab505ea40d1b3e5d02735ecab08ae1b14 ]
- f2fs_fill_super
- recover_fsync_data
- recover_data
- del_fsync_inode
- iput
- iput_final
- write_inode_now
- f2fs_write_inode
- f2fs_balance_fs
- f2fs_balance_fs_bg
- sync_dirty_inodes
With data_flush mount option, during recovery, in order to avoid entering
above writeback flow, let's detect recovery status and do skip in
f2fs_balance_fs_bg.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anatoly Pugachev [Sun, 27 May 2018 23:06:37 +0000 (02:06 +0300)]
disable loading f2fs module on PAGE_SIZE > 4KB
[ Upstream commit
4071e67cffcc5c2a007116a02437471351f550eb ]
The following patch disables loading of f2fs module on architectures
which have PAGE_SIZE > 4096 , since it is impossible to mount f2fs on
such architectures , log messages are:
mount: /mnt: wrong fs type, bad option, bad superblock on
/dev/vdiskb1, missing codepage or helper program, or other error.
/dev/vdiskb1: F2FS filesystem,
UUID=
1d8b9ca4-2389-4910-af3b-
10998969f09c, volume name ""
May 15 18:03:13 ttip kernel: F2FS-fs (vdiskb1): Invalid
page_cache_size (8192), supports only 4KB
May 15 18:03:13 ttip kernel: F2FS-fs (vdiskb1): Can't find valid F2FS
filesystem in 1th superblock
May 15 18:03:13 ttip kernel: F2FS-fs (vdiskb1): Invalid
page_cache_size (8192), supports only 4KB
May 15 18:03:13 ttip kernel: F2FS-fs (vdiskb1): Can't find valid F2FS
filesystem in 2th superblock
May 15 18:03:13 ttip kernel: F2FS-fs (vdiskb1): Invalid
page_cache_size (8192), supports only 4KB
which was introduced by git commit
5c9b469295fb6b10d98923eab5e79c4edb80ed20
tested on git kernel
4.17.0-rc6-00309-gec30dcf7f425
with patch applied:
modprobe: ERROR: could not insert 'f2fs': Invalid argument
May 28 01:40:28 v215 kernel: F2FS not supported on PAGE_SIZE(8192) != 4096
Signed-off-by: Anatoly Pugachev <matorola@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leon Romanovsky [Tue, 29 May 2018 11:56:19 +0000 (14:56 +0300)]
RDMA/mad: Convert BUG_ONs to error flows
[ Upstream commit
2468b82d69e3a53d024f28d79ba0fdb8bf43dfbf ]
Let's perform checks in-place instead of BUG_ONs.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Piggin [Wed, 30 May 2018 10:31:22 +0000 (20:31 +1000)]
powerpc/64s: Fix compiler store ordering to SLB shadow area
[ Upstream commit
926bc2f100c24d4842b3064b5af44ae964c1d81c ]
The stores to update the SLB shadow area must be made as they appear
in the C code, so that the hypervisor does not see an entry with
mismatched vsid and esid. Use WRITE_ONCE for this.
GCC has been observed to elide the first store to esid in the update,
which means that if the hypervisor interrupts the guest after storing
to vsid, it could see an entry with old esid and new vsid, which may
possibly result in memory corruption.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stewart Smith [Thu, 29 Mar 2018 06:02:46 +0000 (17:02 +1100)]
hvc_opal: don't set tb_ticks_per_usec in udbg_init_opal_common()
[ Upstream commit
447808bf500a7cc92173266a59f8a494e132b122 ]
time_init() will set up tb_ticks_per_usec based on reality.
time_init() is called *after* udbg_init_opal_common() during boot.
from arch/powerpc/kernel/time.c:
unsigned long tb_ticks_per_usec = 100; /* sane default */
Currently, all powernv systems have a timebase frequency of 512mhz
(
512000000/
1000000 == 0x200) - although there's nothing written
down anywhere that I can find saying that we couldn't make that
different based on the requirements in the ISA.
So, we've been (accidentally) thwacking the (currently) correct
(for powernv at least) value for tb_ticks_per_usec earlier than
we otherwise would have.
The "sane default" seems to be adequate for our purposes between
udbg_init_opal_common() and time_init() being called, and if it isn't,
then we should probably be setting it somewhere that isn't hvc_opal.c!
Signed-off-by: Stewart Smith <stewart@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Fri, 1 Jun 2018 18:31:44 +0000 (11:31 -0700)]
infiniband: fix a possible use-after-free bug
[ Upstream commit
cb2595c1393b4a5211534e6f0a0fbad369e21ad8 ]
ucma_process_join() will free the new allocated "mc" struct,
if there is any error after that, especially the copy_to_user().
But in parallel, ucma_leave_multicast() could find this "mc"
through idr_find() before ucma_process_join() frees it, since it
is already published.
So "mc" could be used in ucma_leave_multicast() after it is been
allocated and freed in ucma_process_join(), since we don't refcnt
it.
Fix this by separating "publish" from ID allocation, so that we
can get an ID first and publish it later after copy_to_user().
Fixes:
c8f6a362bf3e ("RDMA/cma: Add multicast communication support")
Reported-by: Noam Rathaus <noamr@beyondsecurity.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jozsef Kadlecsik [Thu, 31 May 2018 16:45:21 +0000 (18:45 +0200)]
netfilter: ipset: List timing out entries with "timeout 1" instead of zero
[ Upstream commit
bd975e691486ba52790ba23cc9b4fecab7bc0d31 ]
When listing sets with timeout support, there's a probability that
just timing out entries with "0" timeout value is listed/saved.
However when restoring the saved list, the zero timeout value means
permanent elelements.
The new behaviour is that timing out entries are listed with "timeout 1"
instead of zero.
Fixes netfilter bugzilla #1258.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexandre Belloni [Tue, 5 Jun 2018 21:09:14 +0000 (23:09 +0200)]
rtc: ensure rtc_set_alarm fails when alarms are not supported
[ Upstream commit
abfdff44bc38e9e2ef7929f633fb8462632299d4 ]
When using RTC_ALM_SET or RTC_WKALM_SET with rtc_wkalrm.enabled not set,
rtc_timer_enqueue() is not called and rtc_set_alarm() may succeed but the
subsequent RTC_AIE_ON ioctl will fail. RTC_ALM_READ would also fail in that
case.
Ensure rtc_set_alarm() fails when alarms are not supported to avoid letting
programs think the alarms are working for a particular RTC when they are
not.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathieu Malaterre [Fri, 8 Jun 2018 00:05:17 +0000 (17:05 -0700)]
mm/slub.c: add __printf verification to slab_err()
[ Upstream commit
a38965bf941b7c2af50de09c96bc5f03e136caef ]
__printf is useful to verify format and arguments. Remove the following
warning (with W=1):
mm/slub.c:721:2: warning: function might be possible candidate for `gnu_printf' format attribute [-Wsuggest-attribute=format]
Link: http://lkml.kernel.org/r/20180505200706.19986-1-malat@debian.org
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chintan Pandya [Fri, 8 Jun 2018 00:06:50 +0000 (17:06 -0700)]
mm: vmalloc: avoid racy handling of debugobjects in vunmap
[ Upstream commit
f3c01d2f3ade6790db67f80fef60df84424f8964 ]
Currently, __vunmap flow is,
1) Release the VM area
2) Free the debug objects corresponding to that vm area.
This leave some race window open.
1) Release the VM area
1.5) Some other client gets the same vm area
1.6) This client allocates new debug objects on the same
vm area
2) Free the debug objects corresponding to this vm area.
Here, we actually free 'other' client's debug objects.
Fix this by freeing the debug objects first and then releasing the VM
area.
Link: http://lkml.kernel.org/r/1523961828-9485-2-git-send-email-cpandya@codeaurora.org
Signed-off-by: Chintan Pandya <cpandya@codeaurora.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Scott Mayhew [Fri, 8 Jun 2018 20:31:46 +0000 (16:31 -0400)]
nfsd: fix potential use-after-free in nfsd4_decode_getdeviceinfo
[ Upstream commit
3171822fdcdd6e6d536047c425af6dc7a92dc585 ]
When running a fuzz tester against a KASAN-enabled kernel, the following
splat periodically occurs.
The problem occurs when the test sends a GETDEVICEINFO request with a
malformed xdr array (size but no data) for gdia_notify_types and the
array size is > 0x3fffffff, which results in an overflow in the value of
nbytes which is passed to read_buf().
If the array size is 0x40000000, 0x80000000, or 0xc0000000, then after
the overflow occurs, the value of nbytes 0, and when that happens the
pointer returned by read_buf() points to the end of the xdr data (i.e.
argp->end) when really it should be returning NULL.
Fix this by returning NFS4ERR_BAD_XDR if the array size is > 1000 (this
value is arbitrary, but it's the same threshold used by
nfsd4_decode_bitmap()... in could really be any value >= 1 since it's
expected to get at most a single bitmap in gdia_notify_types).
[ 119.256854] ==================================================================
[ 119.257611] BUG: KASAN: use-after-free in nfsd4_decode_getdeviceinfo+0x5a4/0x5b0 [nfsd]
[ 119.258422] Read of size 4 at addr
ffff880113ada000 by task nfsd/538
[ 119.259146] CPU: 0 PID: 538 Comm: nfsd Not tainted 4.17.0+ #1
[ 119.259662] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.fc25 04/01/2014
[ 119.261202] Call Trace:
[ 119.262265] dump_stack+0x71/0xab
[ 119.263371] print_address_description+0x6a/0x270
[ 119.264609] kasan_report+0x258/0x380
[ 119.265854] ? nfsd4_decode_getdeviceinfo+0x5a4/0x5b0 [nfsd]
[ 119.267291] nfsd4_decode_getdeviceinfo+0x5a4/0x5b0 [nfsd]
[ 119.268549] ? nfs4svc_decode_compoundargs+0xa5b/0x13c0 [nfsd]
[ 119.269873] ? nfsd4_decode_sequence+0x490/0x490 [nfsd]
[ 119.271095] nfs4svc_decode_compoundargs+0xa5b/0x13c0 [nfsd]
[ 119.272393] ? nfsd4_release_compoundargs+0x1b0/0x1b0 [nfsd]
[ 119.273658] nfsd_dispatch+0x183/0x850 [nfsd]
[ 119.274918] svc_process+0x161c/0x31a0 [sunrpc]
[ 119.276172] ? svc_printk+0x190/0x190 [sunrpc]
[ 119.277386] ? svc_xprt_release+0x451/0x680 [sunrpc]
[ 119.278622] nfsd+0x2b9/0x430 [nfsd]
[ 119.279771] ? nfsd_destroy+0x1c0/0x1c0 [nfsd]
[ 119.281157] kthread+0x2db/0x390
[ 119.282347] ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 119.283756] ret_from_fork+0x35/0x40
[ 119.286041] Allocated by task 436:
[ 119.287525] kasan_kmalloc+0xa0/0xd0
[ 119.288685] kmem_cache_alloc+0xe9/0x1f0
[ 119.289900] get_empty_filp+0x7b/0x410
[ 119.291037] path_openat+0xca/0x4220
[ 119.292242] do_filp_open+0x182/0x280
[ 119.293411] do_sys_open+0x216/0x360
[ 119.294555] do_syscall_64+0xa0/0x2f0
[ 119.295721] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 119.298068] Freed by task 436:
[ 119.299271] __kasan_slab_free+0x130/0x180
[ 119.300557] kmem_cache_free+0x78/0x210
[ 119.301823] rcu_process_callbacks+0x35b/0xbd0
[ 119.303162] __do_softirq+0x192/0x5ea
[ 119.305443] The buggy address belongs to the object at
ffff880113ada000
which belongs to the cache filp of size 256
[ 119.308556] The buggy address is located 0 bytes inside of
256-byte region [
ffff880113ada000,
ffff880113ada100)
[ 119.311376] The buggy address belongs to the page:
[ 119.312728] page:
ffffea00044eb680 count:1 mapcount:0 mapping:
0000000000000000 index:0xffff880113ada780
[ 119.314428] flags: 0x17ffe000000100(slab)
[ 119.315740] raw:
0017ffe000000100 0000000000000000 ffff880113ada780 00000001000c0001
[ 119.317379] raw:
ffffea0004553c60 ffffea00045c11e0 ffff88011b167e00 0000000000000000
[ 119.319050] page dumped because: kasan: bad access detected
[ 119.321652] Memory state around the buggy address:
[ 119.322993]
ffff880113ad9f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 119.324515]
ffff880113ad9f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 119.326087] >
ffff880113ada000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 119.327547] ^
[ 119.328730]
ffff880113ada080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 119.330218]
ffff880113ada100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
[ 119.331740] ==================================================================
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhouyang Jia [Mon, 11 Jun 2018 08:04:06 +0000 (16:04 +0800)]
ALSA: fm801: add error handling for snd_ctl_add
[ Upstream commit
ef1ffbe7889e99f5b5cccb41c89e5c94f50f3218 ]
When snd_ctl_add fails, the lack of error-handling code may
cause unexpected results.
This patch adds error-handling code after calling snd_ctl_add.
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhouyang Jia [Mon, 11 Jun 2018 08:18:40 +0000 (16:18 +0800)]
ALSA: emu10k1: add error handling for snd_ctl_add
[ Upstream commit
6d531e7b972cb62ded011c2dfcc2d9f72ea6c421 ]
When snd_ctl_add fails, the lack of error-handling code may
cause unexpected results.
This patch adds error-handling code after calling snd_ctl_add.
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Juergen Gross [Tue, 12 Jun 2018 06:57:53 +0000 (08:57 +0200)]
xen/netfront: raise max number of slots in xennet_get_responses()
[ Upstream commit
57f230ab04d2910a06d17d988f1c4d7586a59113 ]
The max number of slots used in xennet_get_responses() is set to
MAX_SKB_FRAGS + (rx->status <= RX_COPY_THRESHOLD).
In old kernel-xen MAX_SKB_FRAGS was 18, while nowadays it is 17. This
difference is resulting in frequent messages "too many slots" and a
reduced network throughput for some workloads (factor 10 below that of
a kernel-xen based guest).
Replacing MAX_SKB_FRAGS by XEN_NETIF_NR_SLOTS_MIN for calculation of
the max number of slots to use solves that problem (tests showed no
more messages "too many slots" and throughput was as high as with the
kernel-xen based guest system).
Replace MAX_SKB_FRAGS-2 by XEN_NETIF_NR_SLOTS_MIN-1 in
netfront_tx_slot_available() for making it clearer what is really being
tested without actually modifying the tested value.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (VMware) [Thu, 26 Jul 2018 02:28:56 +0000 (22:28 -0400)]
tracing: Quiet gcc warning about maybe unused link variable
commit
2519c1bbe38d7acacc9aacba303ca6f97482ed53 upstream.
Commit
57ea2a34adf4 ("tracing/kprobes: Fix trace_probe flags on
enable_trace_kprobe() failure") added an if statement that depends on another
if statement that gcc doesn't see will initialize the "link" variable and
gives the warning:
"warning: 'link' may be used uninitialized in this function"
It is really a false positive, but to quiet the warning, and also to make
sure that it never actually is used uninitialized, initialize the "link"
variable to NULL and add an if (!WARN_ON_ONCE(!link)) where the compiler
thinks it could be used uninitialized.
Cc: stable@vger.kernel.org
Fixes:
57ea2a34adf4 ("tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Artem Savkov [Wed, 25 Jul 2018 14:20:38 +0000 (16:20 +0200)]
tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure
commit
57ea2a34adf40f3a6e88409aafcf803b8945619a upstream.
If enable_trace_kprobe fails to enable the probe in enable_k(ret)probe
it returns an error, but does not unset the tp flags it set previously.
This results in a probe being considered enabled and failures like being
unable to remove the probe through kprobe_events file since probes_open()
expects every probe to be disabled.
Link: http://lkml.kernel.org/r/20180725102826.8300-1-asavkov@redhat.com
Link: http://lkml.kernel.org/r/20180725142038.4765-1-asavkov@redhat.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes:
41a7dd420c57 ("tracing/kprobes: Support ftrace_event_file base multibuffer")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (VMware) [Wed, 25 Jul 2018 20:02:06 +0000 (16:02 -0400)]
tracing: Fix possible double free in event_enable_trigger_func()
commit
15cc78644d0075e76d59476a4467e7143860f660 upstream.
There was a case that triggered a double free in event_trigger_callback()
due to the called reg() function freeing the trigger_data and then it
getting freed again by the error return by the caller. The solution there
was to up the trigger_data ref count.
Code inspection found that event_enable_trigger_func() has the same issue,
but is not as easy to trigger (requires harder to trigger failures). It
needs to be solved slightly different as it needs more to clean up when the
reg() function fails.
Link: http://lkml.kernel.org/r/20180725124008.7008e586@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes:
7862ad1846e99 ("tracing: Add 'enable_event' and 'disable_event' event trigger commands")
Reivewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (VMware) [Tue, 24 Jul 2018 23:13:31 +0000 (19:13 -0400)]
tracing: Fix double free of event_trigger_data
commit
1863c387259b629e4ebfb255495f67cd06aa229b upstream.
Running the following:
# cd /sys/kernel/debug/tracing
# echo 500000 > buffer_size_kb
[ Or some other number that takes up most of memory ]
# echo snapshot > events/sched/sched_switch/trigger
Triggers the following bug:
------------[ cut here ]------------
kernel BUG at mm/slub.c:296!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
CPU: 6 PID: 6878 Comm: bash Not tainted 4.18.0-rc6-test+ #1066
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
RIP: 0010:kfree+0x16c/0x180
Code: 05 41 0f b6 72 51 5b 5d 41 5c 4c 89 d7 e9 ac b3 f8 ff 48 89 d9 48 89 da 41 b8 01 00 00 00 5b 5d 41 5c 4c 89 d6 e9 f4 f3 ff ff <0f> 0b 0f 0b 48 8b 3d d9 d8 f9 00 e9 c1 fe ff ff 0f 1f 40 00 0f 1f
RSP: 0018:
ffffb654436d3d88 EFLAGS:
00010246
RAX:
ffff91a9d50f3d80 RBX:
ffff91a9d50f3d80 RCX:
ffff91a9d50f3d80
RDX:
00000000000006a4 RSI:
ffff91a9de5a60e0 RDI:
ffff91a9d9803500
RBP:
ffffffff8d267c80 R08:
00000000000260e0 R09:
ffffffff8c1a56be
R10:
fffff0d404543cc0 R11:
0000000000000389 R12:
ffffffff8c1a56be
R13:
ffff91a9d9930e18 R14:
ffff91a98c0c2890 R15:
ffffffff8d267d00
FS:
00007f363ea64700(0000) GS:
ffff91a9de580000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000055c1cacc8e10 CR3:
00000000d9b46003 CR4:
00000000001606e0
Call Trace:
event_trigger_callback+0xee/0x1d0
event_trigger_write+0xfc/0x1a0
__vfs_write+0x33/0x190
? handle_mm_fault+0x115/0x230
? _cond_resched+0x16/0x40
vfs_write+0xb0/0x190
ksys_write+0x52/0xc0
do_syscall_64+0x5a/0x160
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f363e16ab50
Code: 73 01 c3 48 8b 0d 38 83 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 79 db 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 1e e3 01 00 48 89 04 24
RSP: 002b:
00007fff9a4c6378 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
RAX:
ffffffffffffffda RBX:
0000000000000009 RCX:
00007f363e16ab50
RDX:
0000000000000009 RSI:
000055c1cacc8e10 RDI:
0000000000000001
RBP:
000055c1cacc8e10 R08:
00007f363e435740 R09:
00007f363ea64700
R10:
0000000000000073 R11:
0000000000000246 R12:
0000000000000009
R13:
0000000000000001 R14:
00007f363e4345e0 R15:
00007f363e4303c0
Modules linked in: ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device i915 snd_pcm snd_timer i2c_i801 snd soundcore i2c_algo_bit drm_kms_helper
86_pkg_temp_thermal video kvm_intel kvm irqbypass wmi e1000e
---[ end trace
d301afa879ddfa25 ]---
The cause is because the register_snapshot_trigger() call failed to
allocate the snapshot buffer, and then called unregister_trigger()
which freed the data that was passed to it. Then on return to the
function that called register_snapshot_trigger(), as it sees it
failed to register, it frees the trigger_data again and causes
a double free.
By calling event_trigger_init() on the trigger_data (which only ups
the reference counter for it), and then event_trigger_free() afterward,
the trigger_data would not get freed by the registering trigger function
as it would only up and lower the ref count for it. If the register
trigger function fails, then the event_trigger_free() called after it
will free the trigger data normally.
Link: http://lkml.kernel.org/r/20180724191331.738eb819@gandalf.local.home
Cc: stable@vger.kerne.org
Fixes:
93e31ffbf417 ("tracing: Add 'snapshot' event trigger command")
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KT Liao [Mon, 16 Jul 2018 12:10:03 +0000 (12:10 +0000)]
Input: elan_i2c - add another ACPI ID for Lenovo Ideapad 330-15AST
commit
6f88a6439da5d94de334a341503bc2c7f4a7ea7f upstream.
Add ELAN0622 to ACPI mapping table to support Elan touchpad found in
Ideapad 330-15AST.
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Reported-by: Anant Shende <anantshende@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen-Yu Tsai [Wed, 18 Jul 2018 17:24:35 +0000 (17:24 +0000)]
Input: i8042 - add Lenovo LaVie Z to the i8042 reset list
commit
384cf4285b34e08917e3e66603382f2b0c4f6e1b upstream.
The Lenovo LaVie Z laptop requires i8042 to be reset in order to
consistently detect its Elantech touchpad. The nomux and kbdreset
quirks are not sufficient.
It's possible the other LaVie Z models from NEC require this as well.
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Donald Shanty III [Wed, 4 Jul 2018 15:50:47 +0000 (15:50 +0000)]
Input: elan_i2c - add ACPI ID for lenovo ideapad 330
commit
938f45008d8bc391593c97508bc798cc95a52b9b upstream.
This allows Elan driver to bind to the touchpad found in Lenovo Ideapad 330
series laptops.
Signed-off-by: Donald Shanty III <dshanty@protonmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Burton [Thu, 12 Jul 2018 16:33:04 +0000 (09:33 -0700)]
MIPS: Fix off-by-one in pci_resource_to_user()
commit
38c0a74fe06da3be133cae3fb7bde6a9438e698b upstream.
The MIPS implementation of pci_resource_to_user() introduced in v3.12 by
commit
4c2924b725fb ("MIPS: PCI: Use pci_resource_to_user to map pci
memory space properly") incorrectly sets *end to the address of the
byte after the resource, rather than the last byte of the resource.
This results in userland seeing resources as a byte larger than they
actually are, for example a 32 byte BAR will be reported by a tool such
as lspci as being 33 bytes in size:
Region 2: I/O ports at 1000 [disabled] [size=33]
Correct this by subtracting one from the calculated end address,
reporting the correct address to userland.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Rui Wang <rui.wang@windriver.com>
Fixes:
4c2924b725fb ("MIPS: PCI: Use pci_resource_to_user to map pci memory space properly")
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v3.12+
Patchwork: https://patchwork.linux-mips.org/patch/19829/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 28 Jul 2018 05:45:05 +0000 (07:45 +0200)]
Linux 4.4.145
Arnd Bergmann [Thu, 26 Jul 2018 08:13:23 +0000 (10:13 +0200)]
ARM: fix put_user() for gcc-8
Building kernels before linux-4.7 with gcc-8 results in many build failures
when gcc triggers a check that was meant to catch broken compilers:
/tmp/ccCGMQmS.s:648: Error: .err encountered
According to the discussion in the gcc bugzilla, a local "register
asm()" variable is still supposed to be the correct way to force an
inline assembly to use a particular register, but marking it 'const'
lets the compiler do optimizations that break that, i.e the compiler is
free to treat the variable as either 'const' or 'register' in that case.
Upstream commit
9f73bd8bb445 ("ARM: uaccess: remove put_user() code
duplication") fixed this problem in linux-4.8 as part of a larger change,
but seems a little too big to be backported to 4.4.
Let's take the simplest fix and change only the one broken line in the
same way as newer kernels.
Suggested-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85745
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86673
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 26 Jul 2018 08:13:22 +0000 (10:13 +0200)]
turn off -Wattribute-alias
Starting with gcc-8.1, we get a warning about all system call definitions,
which use an alias between functions with incompatible prototypes, e.g.:
In file included from ../mm/process_vm_access.c:19:
../include/linux/syscalls.h:211:18: warning: 'sys_process_vm_readv' alias between functions of incompatible types 'long int(pid_t, const struct iovec *, long unsigned int, const struct iovec *, long unsigned int, long unsigned int)' {aka 'long int(int, const struct iovec *, long unsigned int, const struct iovec *, long unsigned int, long unsigned int)'} and 'long int(long int, long int, long int, long int, long int, long int)' [-Wattribute-alias]
asmlinkage long sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \
^~~
../include/linux/syscalls.h:207:2: note: in expansion of macro '__SYSCALL_DEFINEx'
__SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
^~~~~~~~~~~~~~~~~
../include/linux/syscalls.h:201:36: note: in expansion of macro 'SYSCALL_DEFINEx'
#define SYSCALL_DEFINE6(name, ...) SYSCALL_DEFINEx(6, _##name, __VA_ARGS__)
^~~~~~~~~~~~~~~
../mm/process_vm_access.c:300:1: note: in expansion of macro 'SYSCALL_DEFINE6'
SYSCALL_DEFINE6(process_vm_readv, pid_t, pid, const struct iovec __user *, lvec,
^~~~~~~~~~~~~~~
../include/linux/syscalls.h:215:18: note: aliased declaration here
asmlinkage long SyS##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \
^~~
../include/linux/syscalls.h:207:2: note: in expansion of macro '__SYSCALL_DEFINEx'
__SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
^~~~~~~~~~~~~~~~~
../include/linux/syscalls.h:201:36: note: in expansion of macro 'SYSCALL_DEFINEx'
#define SYSCALL_DEFINE6(name, ...) SYSCALL_DEFINEx(6, _##name, __VA_ARGS__)
^~~~~~~~~~~~~~~
../mm/process_vm_access.c:300:1: note: in expansion of macro 'SYSCALL_DEFINE6'
SYSCALL_DEFINE6(process_vm_readv, pid_t, pid, const struct iovec __user *, lvec,
This is really noisy and does not indicate a real problem. In the latest
mainline kernel, this was addressed by commit
bee20031772a ("disable
-Wattribute-alias warning for SYSCALL_DEFINEx()"), which seems too invasive
to backport.
This takes a much simpler approach and just disables the warning across the
kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Mon, 26 Feb 2018 12:27:13 +0000 (14:27 +0200)]
can: xilinx_can: fix RX overflow interrupt not being enabled
commit
83997997252f5d3fc7f04abc24a89600c2b504ab upstream.
RX overflow interrupt (RXOFLW) is disabled even though xcan_interrupt()
processes it. This means that an RX overflow interrupt will only be
processed when another interrupt gets asserted (e.g. for RX/TX).
Fix that by enabling the RXOFLW interrupt.
Fixes:
b1201e44f50b ("can: xilinx CAN controller support")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Mon, 26 Feb 2018 12:39:59 +0000 (14:39 +0200)]
can: xilinx_can: fix incorrect clear of non-processed interrupts
commit
2f4f0f338cf453bfcdbcf089e177c16f35f023c8 upstream.
xcan_interrupt() clears ERROR|RXOFLV|BSOFF|ARBLST interrupts if any of
them is asserted. This does not take into account that some of them
could have been asserted between interrupt status read and interrupt
clear, therefore clearing them without handling them.
Fix the code to only clear those interrupts that it knows are asserted
and therefore going to be processed in xcan_err_interrupt().
Fixes:
b1201e44f50b ("can: xilinx CAN controller support")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Thu, 23 Feb 2017 12:50:03 +0000 (14:50 +0200)]
can: xilinx_can: keep only 1-2 frames in TX FIFO to fix TX accounting
commit
620050d9c2be15c47017ba95efe59e0832e99a56 upstream.
The xilinx_can driver assumes that the TXOK interrupt only clears after
it has been acknowledged as many times as there have been successfully
sent frames.
However, the documentation does not mention such behavior, instead
saying just that the interrupt is cleared when the clear bit is set.
Similarly, testing seems to also suggest that it is immediately cleared
regardless of the amount of frames having been sent. Performing some
heavy TX load and then going back to idle has the tx_head drifting
further away from tx_tail over time, steadily reducing the amount of
frames the driver keeps in the TX FIFO (but not to zero, as the TXOK
interrupt always frees up space for 1 frame from the driver's
perspective, so frames continue to be sent) and delaying the local echo
frames.
The TX FIFO tracking is also otherwise buggy as it does not account for
TX FIFO being cleared after software resets, causing
BUG!, TX FIFO full when queue awake!
messages to be output.
There does not seem to be any way to accurately track the state of the
TX FIFO for local echo support while using the full TX FIFO.
The Zynq version of the HW (but not the soft-AXI version) has watermark
programming support and with it an additional TX-FIFO-empty interrupt
bit.
Modify the driver to only put 1 frame into TX FIFO at a time on soft-AXI
and 2 frames at a time on Zynq. On Zynq the TXFEMP interrupt bit is used
to detect whether 1 or 2 frames have been sent at interrupt processing
time.
Tested with the integrated CAN on Zynq-7000 SoC. The 1-frame-FIFO mode
was also tested.
An alternative way to solve this would be to drop local echo support but
keep using the full TX FIFO.
v2: Add FIFO space check before TX queue wake with locking to
synchronize with queue stop. This avoids waking the queue when xmit()
had just filled it.
v3: Keep local echo support and reduce the amount of frames in FIFO
instead as suggested by Marc Kleine-Budde.
Fixes:
b1201e44f50b ("can: xilinx CAN controller support")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Tue, 7 Feb 2017 11:23:04 +0000 (13:23 +0200)]
can: xilinx_can: fix device dropping off bus on RX overrun
commit
2574fe54515ed3487405de329e4e9f13d7098c10 upstream.
The xilinx_can driver performs a software reset when an RX overrun is
detected. This causes the device to enter Configuration mode where no
messages are received or transmitted.
The documentation does not mention any need to perform a reset on an RX
overrun, and testing by inducing an RX overflow also indicated that the
device continues to work just fine without a reset.
Remove the software reset.
Tested with the integrated CAN on Zynq-7000 SoC.
Fixes:
b1201e44f50b ("can: xilinx CAN controller support")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Wed, 8 Feb 2017 11:13:40 +0000 (13:13 +0200)]
can: xilinx_can: fix recovery from error states not being propagated
commit
877e0b75947e2c7acf5624331bb17ceb093c98ae upstream.
The xilinx_can driver contains no mechanism for propagating recovery
from CAN_STATE_ERROR_WARNING and CAN_STATE_ERROR_PASSIVE.
Add such a mechanism by factoring the handling of
XCAN_STATE_ERROR_PASSIVE and XCAN_STATE_ERROR_WARNING out of
xcan_err_interrupt and checking for recovery after RX and TX if the
interface is in one of those states.
Tested with the integrated CAN on Zynq-7000 SoC.
Fixes:
b1201e44f50b ("can: xilinx CAN controller support")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Tue, 7 Feb 2017 15:01:14 +0000 (17:01 +0200)]
can: xilinx_can: fix RX loop if RXNEMP is asserted without RXOK
commit
32852c561bffd613d4ed7ec464b1e03e1b7b6c5c upstream.
If the device gets into a state where RXNEMP (RX FIFO not empty)
interrupt is asserted without RXOK (new frame received successfully)
interrupt being asserted, xcan_rx_poll() will continue to try to clear
RXNEMP without actually reading frames from RX FIFO. If the RX FIFO is
not empty, the interrupt will not be cleared and napi_schedule() will
just be called again.
This situation can occur when:
(a) xcan_rx() returns without reading RX FIFO due to an error condition.
The code tries to clear both RXOK and RXNEMP but RXNEMP will not clear
due to a frame still being in the FIFO. The frame will never be read
from the FIFO as RXOK is no longer set.
(b) A frame is received between xcan_rx_poll() reading interrupt status
and clearing RXOK. RXOK will be cleared, but RXNEMP will again remain
set as the new message is still in the FIFO.
I'm able to trigger case (b) by flooding the bus with frames under load.
There does not seem to be any benefit in using both RXNEMP and RXOK in
the way the driver does, and the polling example in the reference manual
(UG585 v1.10 18.3.7 Read Messages from RxFIFO) also says that either
RXOK or RXNEMP can be used for detecting incoming messages.
Fix the issue and simplify the RX processing by only using RXNEMP
without RXOK.
Tested with the integrated CAN on Zynq-7000 SoC.
Fixes:
b1201e44f50b ("can: xilinx CAN controller support")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Tue, 10 Jul 2018 12:51:33 +0000 (14:51 +0200)]
driver core: Partially revert "driver core: correct device's shutdown order"
commit
722e5f2b1eec7de61117b7c0a7914761e3da2eda upstream.
Commit
52cdbdd49853 (driver core: correct device's shutdown order)
introduced a regression by breaking device shutdown on some systems.
Namely, the devices_kset_move_last() call in really_probe() added by
that commit is a mistake as it may cause parents to follow children
in the devices_kset list which then causes shutdown to fail. For
example, if a device has children before really_probe() is called
for it (which is not uncommon), that call will cause it to be
reordered after the children in the devices_kset list and the
ordering of that list will not reflect the correct device shutdown
order any more.
Also it causes the devices_kset list to be constantly reordered
until all drivers have been probed which is totally pointless
overhead in the majority of cases and it only covered an issue
with system shutdown, while system-wide suspend/resume potentially
had the same issue on the affected platforms (which was not covered).
Moreover, the shutdown issue originally addressed by the change in
really_probe() made by commit
52cdbdd49853 is not present in 4.18-rc
any more, since dra7 started to use the sdhci-omap driver which
doesn't disable any regulators during shutdown, so the really_probe()
part of commit
52cdbdd49853 can be safely reverted. [The original
issue was related to the omap_hsmmc driver used by dra7 previously.]
For the above reasons, revert the really_probe() modifications made
by commit
52cdbdd49853.
The other code changes made by commit
52cdbdd49853 are useful and
they need not be reverted.
Fixes:
52cdbdd49853 (driver core: correct device's shutdown order)
Link: https://lore.kernel.org/lkml/CAFgQCTt7VfqM=UyCnvNFxrSw8Z6cUtAi3HUwR4_xPAc03SgHjQ@mail.gmail.com/
Reported-by: Pingfan Liu <kernelfans@gmail.com>
Tested-by: Pingfan Liu <kernelfans@gmail.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jerry Zhang [Mon, 2 Jul 2018 19:48:08 +0000 (12:48 -0700)]
usb: gadget: f_fs: Only return delayed status when len is 0
commit
4d644abf25698362bd33d17c9ddc8f7122c30f17 upstream.
Commit
1b9ba000 ("Allow function drivers to pause control
transfers") states that USB_GADGET_DELAYED_STATUS is only
supported if data phase is 0 bytes.
It seems that when the length is not 0 bytes, there is no
need to explicitly delay the data stage since the transfer
is not completed until the user responds. However, when the
length is 0, there is no data stage and the transfer is
finished once setup() returns, hence there is a need to
explicitly delay completion.
This manifests as the following bugs:
Prior to
946ef68ad4e4 ('Let setup() return
USB_GADGET_DELAYED_STATUS'), when setup is 0 bytes, ffs
would require user to queue a 0 byte request in order to
clear setup state. However, that 0 byte request was actually
not needed and would hang and cause errors in other setup
requests.
After the above commit, 0 byte setups work since the gadget
now accepts empty queues to ep0 to clear the delay, but all
other setups hang.
Fixes:
946ef68ad4e4 ("Let setup() return USB_GADGET_DELAYED_STATUS")
Signed-off-by: Jerry Zhang <zhangjerry@google.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bin Liu [Thu, 19 Jul 2018 19:39:37 +0000 (14:39 -0500)]
usb: core: handle hub C_PORT_OVER_CURRENT condition
commit
249a32b7eeb3edb6897dd38f89651a62163ac4ed upstream.
Based on USB2.0 Spec Section 11.12.5,
"If a hub has per-port power switching and per-port current limiting,
an over-current on one port may still cause the power on another port
to fall below specific minimums. In this case, the affected port is
placed in the Power-Off state and C_PORT_OVER_CURRENT is set for the
port, but PORT_OVER_CURRENT is not set."
so let's check C_PORT_OVER_CURRENT too for over current condition.
Fixes:
08d1dec6f405 ("usb:hub set hub->change_bits when over-current happens")
Cc: <stable@vger.kernel.org>
Tested-by: Alessandro Antenucci <antenucci@korg.it>
Signed-off-by: Bin Liu <b-liu@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lubomir Rintel [Tue, 10 Jul 2018 06:28:49 +0000 (08:28 +0200)]
usb: cdc_acm: Add quirk for Castles VEGA3000
commit
1445cbe476fc3dd09c0b380b206526a49403c071 upstream.
The device (a POS terminal) implements CDC ACM, but has not union
descriptor.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Willem de Bruijn [Mon, 23 Jul 2018 23:36:48 +0000 (19:36 -0400)]
ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull
[ Upstream commit
2efd4fca703a6707cad16ab486eaab8fc7f0fd49 ]
Syzbot reported a read beyond the end of the skb head when returning
IPV6_ORIGDSTADDR:
BUG: KMSAN: kernel-infoleak in put_cmsg+0x5ef/0x860 net/core/scm.c:242
CPU: 0 PID: 4501 Comm: syz-executor128 Not tainted 4.17.0+ #9
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:113
kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1125
kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1219
kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1261
copy_to_user include/linux/uaccess.h:184 [inline]
put_cmsg+0x5ef/0x860 net/core/scm.c:242
ip6_datagram_recv_specific_ctl+0x1cf3/0x1eb0 net/ipv6/datagram.c:719
ip6_datagram_recv_ctl+0x41c/0x450 net/ipv6/datagram.c:733
rawv6_recvmsg+0x10fb/0x1460 net/ipv6/raw.c:521
[..]
This logic and its ipv4 counterpart read the destination port from
the packet at skb_transport_offset(skb) + 4.
With MSG_MORE and a local SOCK_RAW sender, syzbot was able to cook a
packet that stores headers exactly up to skb_transport_offset(skb) in
the head and the remainder in a frag.
Call pskb_may_pull before accessing the pointer to ensure that it lies
in skb head.
Link: http://lkml.kernel.org/r/CAF=yD-LEJwZj5a1-bAAj2Oy_hKmGygV6rsJ_WOrAYnv-fnayiQ@mail.gmail.com
Reported-by: syzbot+9adb4b567003cac781f0@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Mon, 23 Jul 2018 16:28:19 +0000 (09:28 -0700)]
tcp: detect malicious patterns in tcp_collapse_ofo_queue()
[ Upstream commit
3d4bf93ac12003f9b8e1e2de37fe27983deebdcf ]
In case an attacker feeds tiny packets completely out of order,
tcp_collapse_ofo_queue() might scan the whole rb-tree, performing
expensive copies, but not changing socket memory usage at all.
1) Do not attempt to collapse tiny skbs.
2) Add logic to exit early when too many tiny skbs are detected.
We prefer not doing aggressive collapsing (which copies packets)
for pathological flows, and revert to tcp_prune_ofo_queue() which
will be less expensive.
In the future, we might add the possibility of terminating flows
that are proven to be malicious.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Mon, 23 Jul 2018 16:28:18 +0000 (09:28 -0700)]
tcp: avoid collapses in tcp_prune_queue() if possible
[ Upstream commit
f4a3313d8e2ca9fd8d8f45e40a2903ba782607e7 ]
Right after a TCP flow is created, receiving tiny out of order
packets allways hit the condition :
if (atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf)
tcp_clamp_window(sk);
tcp_clamp_window() increases sk_rcvbuf to match sk_rmem_alloc
(guarded by tcp_rmem[2])
Calling tcp_collapse_ofo_queue() in this case is not useful,
and offers a O(N^2) surface attack to malicious peers.
Better not attempt anything before full queue capacity is reached,
forcing attacker to spend lots of resource and allow us to more
easily detect the abuse.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yuchung Cheng [Wed, 18 Jul 2018 20:56:36 +0000 (13:56 -0700)]
tcp: do not delay ACK in DCTCP upon CE status change
[ Upstream commit
a0496ef2c23b3b180902dd185d0d63ccbc624cf8 ]
Per DCTCP RFC8257 (Section 3.2) the ACK reflecting the CE status change
has to be sent immediately so the sender can respond quickly:
""" When receiving packets, the CE codepoint MUST be processed as follows:
1. If the CE codepoint is set and DCTCP.CE is false, set DCTCP.CE to
true and send an immediate ACK.
2. If the CE codepoint is not set and DCTCP.CE is true, set DCTCP.CE
to false and send an immediate ACK.
"""
Previously DCTCP implementation may continue to delay the ACK. This
patch fixes that to implement the RFC by forcing an immediate ACK.
Tested with this packetdrill script provided by Larry Brakmo
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0
0.000 bind(3, ..., ...) = 0
0.000 listen(3, 1) = 0
0.100 < [ect0] SEW 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
0.100 > SE. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 8>
0.110 < [ect0] . 1:1(0) ack 1 win 257
0.200 accept(3, ..., ...) = 4
+0 setsockopt(4, SOL_SOCKET, SO_DEBUG, [1], 4) = 0
0.200 < [ect0] . 1:1001(1000) ack 1 win 257
0.200 > [ect01] . 1:1(0) ack 1001
0.200 write(4, ..., 1) = 1
0.200 > [ect01] P. 1:2(1) ack 1001
0.200 < [ect0] . 1001:2001(1000) ack 2 win 257
+0.005 < [ce] . 2001:3001(1000) ack 2 win 257
+0.000 > [ect01] . 2:2(0) ack 2001
// Previously the ACK below would be delayed by 40ms
+0.000 > [ect01] E. 2:2(0) ack 3001
+0.500 < F. 9501:9501(0) ack 4 win 257
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yuchung Cheng [Wed, 18 Jul 2018 20:56:35 +0000 (13:56 -0700)]
tcp: do not cancel delay-AcK on DCTCP special ACK
[ Upstream commit
27cde44a259c380a3c09066fc4b42de7dde9b1ad ]
Currently when a DCTCP receiver delays an ACK and receive a
data packet with a different CE mark from the previous one's, it
sends two immediate ACKs acking previous and latest sequences
respectly (for ECN accounting).
Previously sending the first ACK may mark off the delayed ACK timer
(tcp_event_ack_sent). This may subsequently prevent sending the
second ACK to acknowledge the latest sequence (tcp_ack_snd_check).
The culprit is that tcp_send_ack() assumes it always acknowleges
the latest sequence, which is not true for the first special ACK.
The fix is to not make the assumption in tcp_send_ack and check the
actual ack sequence before cancelling the delayed ACK. Further it's
safer to pass the ack sequence number as a local variable into
tcp_send_ack routine, instead of intercepting tp->rcv_nxt to avoid
future bugs like this.
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yuchung Cheng [Wed, 18 Jul 2018 20:56:34 +0000 (13:56 -0700)]
tcp: helpers to send special DCTCP ack
[ Upstream commit
2987babb6982306509380fc11b450227a844493b ]
Refactor and create helpers to send the special ACK in DCTCP.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yuchung Cheng [Thu, 12 Jul 2018 13:04:52 +0000 (06:04 -0700)]
tcp: fix dctcp delayed ACK schedule
[ Upstream commit
b0c05d0e99d98d7f0cd41efc1eeec94efdc3325d ]
Previously, when a data segment was sent an ACK was piggybacked
on the data segment without generating a CA_EVENT_NON_DELAYED_ACK
event to notify congestion control modules. So the DCTCP
ca->delayed_ack_reserved flag could incorrectly stay set when
in fact there were no delayed ACKs being reserved. This could result
in sending a special ECN notification ACK that carries an older
ACK sequence, when in fact there was no need for such an ACK.
DCTCP keeps track of the delayed ACK status with its own separate
state ca->delayed_ack_reserved. Previously it may accidentally cancel
the delayed ACK without updating this field upon sending a special
ACK that carries a older ACK sequence. This inconsistency would
lead to DCTCP receiver never acknowledging the latest data until the
sender times out and retry in some cases.
Packetdrill script (provided by Larry Brakmo)
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0
0.000 bind(3, ..., ...) = 0
0.000 listen(3, 1) = 0
0.100 < [ect0] SEW 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
0.100 > SE. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 8>
0.110 < [ect0] . 1:1(0) ack 1 win 257
0.200 accept(3, ..., ...) = 4
0.200 < [ect0] . 1:1001(1000) ack 1 win 257
0.200 > [ect01] . 1:1(0) ack 1001
0.200 write(4, ..., 1) = 1
0.200 > [ect01] P. 1:2(1) ack 1001
0.200 < [ect0] . 1001:2001(1000) ack 2 win 257
0.200 write(4, ..., 1) = 1
0.200 > [ect01] P. 2:3(1) ack 2001
0.200 < [ect0] . 2001:3001(1000) ack 3 win 257
0.200 < [ect0] . 3001:4001(1000) ack 3 win 257
0.200 > [ect01] . 3:3(0) ack 4001
0.210 < [ce] P. 4001:4501(500) ack 3 win 257
+0.001 read(4, ..., 4500) = 4500
+0 write(4, ..., 1) = 1
+0 > [ect01] PE. 3:4(1) ack 4501
+0.010 < [ect0] W. 4501:5501(1000) ack 4 win 257
// Previously the ACK sequence below would be 4501, causing a long RTO
+0.040~+0.045 > [ect01] . 4:4(0) ack 5501 // delayed ack
+0.311 < [ect0] . 5501:6501(1000) ack 4 win 257 // More data
+0 > [ect01] . 4:4(0) ack 6501 // now acks everything
+0.500 < F. 9501:9501(0) ack 4 win 257
Reported-by: Larry Brakmo <brakmo@fb.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roopa Prabhu [Fri, 20 Jul 2018 20:21:01 +0000 (13:21 -0700)]
rtnetlink: add rtnl_link_state check in rtnl_configure_link
[ Upstream commit
5025f7f7d506fba9b39e7fe8ca10f6f34cb9bc2d ]
rtnl_configure_link sets dev->rtnl_link_state to
RTNL_LINK_INITIALIZED and unconditionally calls
__dev_notify_flags to notify user-space of dev flags.
current call sequence for rtnl_configure_link
rtnetlink_newlink
rtnl_link_ops->newlink
rtnl_configure_link (unconditionally notifies userspace of
default and new dev flags)
If a newlink handler wants to call rtnl_configure_link
early, we will end up with duplicate notifications to
user-space.
This patch fixes rtnl_configure_link to check rtnl_link_state
and call __dev_notify_flags with gchanges = 0 if already
RTNL_LINK_INITIALIZED.
Later in the series, this patch will help the following sequence
where a driver implementing newlink can call rtnl_configure_link
to initialize the link early.
makes the following call sequence work:
rtnetlink_newlink
rtnl_link_ops->newlink (vxlan) -> rtnl_configure_link (initializes
link and notifies
user-space of default
dev flags)
rtnl_configure_link (updates dev flags if requested by user ifm
and notifies user-space of new dev flags)
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jack Morgenstein [Tue, 24 Jul 2018 11:27:55 +0000 (14:27 +0300)]
net/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapper
[ Upstream commit
958c696f5a7274d9447a458ad7aa70719b29a50a ]
Function mlx4_RST2INIT_QP_wrapper saved the qp number passed in the qp
context, rather than the one passed in the input modifier.
However, the qp number in the qp context is not defined as a
required parameter by the FW. Therefore, drivers may choose to not
specify the qp number in the qp context for the reset-to-init transition.
Thus, we must save the qp number passed in the command input modifier --
which is always present. (This saved qp number is used as the input
modifier for command 2RST_QP when a slave's qp's are destroyed).
Fixes:
c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Mon, 23 Jul 2018 14:50:48 +0000 (16:50 +0200)]
ip: hash fragments consistently
[ Upstream commit
3dd1c9a1270736029ffca670e9bd0265f4120600 ]
The skb hash for locally generated ip[v6] fragments belonging
to the same datagram can vary in several circumstances:
* for connected UDP[v6] sockets, the first fragment get its hash
via set_owner_w()/skb_set_hash_from_sk()
* for unconnected IPv6 UDPv6 sockets, the first fragment can get
its hash via ip6_make_flowlabel()/skb_get_hash_flowi6(), if
auto_flowlabel is enabled
For the following frags the hash is usually computed via
skb_get_hash().
The above can cause OoO for unconnected IPv6 UDPv6 socket: in that
scenario the egress tx queue can be selected on a per packet basis
via the skb hash.
It may also fool flow-oriented schedulers to place fragments belonging
to the same datagram in different flows.
Fix the issue by copying the skb hash from the head frag into
the others at fragmentation time.
Before this commit:
perf probe -a "dev_queue_xmit skb skb->hash skb->l4_hash:b1@0/8 skb->sw_hash:b1@1/8"
netperf -H $IPV4 -t UDP_STREAM -l 5 -- -m 2000 -n &
perf record -e probe:dev_queue_xmit -e probe:skb_set_owner_w -a sleep 0.1
perf script
probe:dev_queue_xmit: (
ffffffff8c6b1b20) hash=
3713014309 l4_hash=1 sw_hash=0
probe:dev_queue_xmit: (
ffffffff8c6b1b20) hash=0 l4_hash=0 sw_hash=0
After this commit:
probe:dev_queue_xmit: (
ffffffff8c6b1b20) hash=
2171763177 l4_hash=1 sw_hash=0
probe:dev_queue_xmit: (
ffffffff8c6b1b20) hash=
2171763177 l4_hash=1 sw_hash=0
Fixes:
b73c3d0e4f0e ("net: Save TX flow hash in sock and set in skbuf on xmit")
Fixes:
67800f9b1f4e ("ipv6: Call skb_get_hash_flowi6 to get skb->hash in ip6_make_flowlabel")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felix Fietkau [Fri, 20 Jul 2018 11:58:21 +0000 (13:58 +0200)]
MIPS: ath79: fix register address in ath79_ddr_wb_flush()
commit
bc88ad2efd11f29e00a4fd60fcd1887abfe76833 upstream.
ath79_ddr_wb_flush_base has the type void __iomem *, so register offsets
need to be a multiple of 4 in order to access the intended register.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes:
24b0e3e84fbf ("MIPS: ath79: Improve the DDR controller interface")
Patchwork: https://patchwork.linux-mips.org/patch/19912/
Cc: Alban Bedel <albeu@free.fr>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 25 Jul 2018 08:18:33 +0000 (10:18 +0200)]
Linux 4.4.144
Sascha Hauer [Tue, 5 Dec 2017 15:01:20 +0000 (16:01 +0100)]
ubi: fastmap: Erase outdated anchor PEBs during attach
commit
f78e5623f45bab2b726eec29dc5cefbbab2d0b1c upstream.
The fastmap update code might erase the current fastmap anchor PEB
in case it doesn't find any new free PEB. When a power cut happens
in this situation we must not have any outdated fastmap anchor PEB
on the device, because that would be used to attach during next
boot.
The easiest way to make that sure is to erase all outdated fastmap
anchor PEBs synchronously during attach.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Richard Weinberger <richard@nod.at>
Fixes:
dbb7d2a88d2a ("UBI: Add fastmap core")
Cc: <stable@vger.kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Weinberger [Wed, 24 Aug 2016 12:36:15 +0000 (14:36 +0200)]
ubi: Fix Fastmap's update_vol()
commit
f7d11b33d4e8cedf19367c09b891bbc705163976 upstream.
Usually Fastmap is free to consider every PEB in one of the pools
as newer than the existing PEB. Since PEBs in a pool are by definition
newer than everything else.
But update_vol() missed the case that a pool can contain more than
one candidate.
Cc: <stable@vger.kernel.org>
Fixes:
dbb7d2a88d ("UBI: Add fastmap core")
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Weinberger [Wed, 24 Aug 2016 12:36:14 +0000 (14:36 +0200)]
ubi: Fix races around ubi_refill_pools()
commit
2e8f08deabbc7eefe4c5838aaa6aa9a23a8acf2e upstream.
When writing a new Fastmap the first thing that happens
is refilling the pools in memory.
At this stage it is possible that new PEBs from the new pools
get already claimed and written with data.
If this happens before the new Fastmap data structure hits the
flash and we face power cut the freshly written PEB will not
scanned and unnoticed.
Solve the issue by locking the pools until Fastmap is written.
Cc: <stable@vger.kernel.org>
Fixes:
dbb7d2a88d ("UBI: Add fastmap core")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Weinberger [Tue, 14 Jun 2016 08:12:17 +0000 (10:12 +0200)]
ubi: Be more paranoid while seaching for the most recent Fastmap
commit
74f2c6e9a47cf4e508198c8594626cc82906a13d upstream.
Since PEB erasure is asynchornous it can happen that there is
more than one Fastmap on the MTD. This is fine because the attach logic
will pick the Fastmap data structure with the highest sequence number.
On a not so well configured MTD stack spurious ECC errors are common.
Causes can be different, bad hardware, wrong operating modes, etc...
If the most current Fastmap renders bad due to ECC errors UBI might
pick an older Fastmap to attach from.
While this can only happen on an anyway broken setup it will show
completely different sympthoms and makes finding the root cause much
more difficult.
So, be debug friendly and fall back to scanning mode of we're facing
an ECC error while scanning for Fastmap.
Cc: <stable@vger.kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Weinberger [Tue, 14 Jun 2016 08:12:15 +0000 (10:12 +0200)]
ubi: Rework Fastmap attach base code
commit
fdf10ed710c0aa177e8dfcd84e65e4e5e8e0956b upstream.
Introduce a new list to the UBI attach information
object to be able to deal better with old and corrupted
Fastmap eraseblocks.
Also move more Fastmap specific code into fastmap.c.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Weinberger [Tue, 14 Jun 2016 08:12:13 +0000 (10:12 +0200)]
ubi: Introduce vol_ignored()
commit
243a4f8126fcf7facb04b324dbb7c85d10b11ce9 upstream.
This makes the logic more easy to follow.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>