OSDN Git Service
Ezequiel Garcia [Tue, 2 Sep 2014 12:51:15 +0000 (09:51 -0300)]
drm/tilcdc: Fix the error path in tilcdc_load()
The current error path calls tilcdc_unload() in case of an error to release
the resources. However, this is wrong because not all resources have been
allocated by the time an error occurs in tilcdc_load().
To fix it, this commit adds proper labels to bail out at the different
stages in the load function, and release only the resources actually allocated.
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Johannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 16 Sep 2014 06:02:09 +0000 (16:02 +1000)]
Merge tag 'drm-intel-next-2014-09-05' of git://anongit.freedesktop.org/drm-intel into drm-next
- final bits (again) for the rotation support (Sonika Jindal)
- support bl_power in the intel backlight (Jani)
- vdd handling improvements from Ville
- i830M fixes from Ville
- piles of prep work all over to make skl enabling just plug in (Damien, Sonika)
- rename DP training defines to reflect latest edp standards, this touches all
drm drivers supporting DP (Sonika Jindal)
- cache edids during single detect cycle to avoid re-reading it for e.g. audio,
from Chris
- move w/a for registers which are stored in the hw context to the context init
code (Arun&Damien)
- edp panel power sequencer fixes, helps chv a lot (Ville)
- piles of other chv fixes all over
- much more paranoid pageflip handling with stall detection and better recovery
from Chris
- small things all over, as usual
* tag 'drm-intel-next-2014-09-05' of git://anongit.freedesktop.org/drm-intel: (114 commits)
drm/i915: Update DRIVER_DATE to
20140905
drm/i915: Decouple the stuck pageflip on modeset
drm/i915: Check for a stalled page flip after each vblank
drm/i915: Introduce a for_each_plane() macro
drm/i915: Rewrite ABS_DIFF() in a safer manner
drm/i915: Add comments explaining the vdd on/off functions
drm/i915: Move DP port disable to post_disable for pch platforms
drm/i915: Enable DP port earlier
drm/i915: Turn on panel power before doing aux transfers
drm/i915: Be more careful when picking the initial power sequencer pipe
drm/i915: Reset power sequencer pipe tracking when disp2d is off
drm/i915: Track which port is using which pipe's power sequencer
drm/i915: Fix edp vdd locking
drm/i915: Reset the HEAD pointer for the ring after writing START
drm/i915: Fix unsafe vma iteration in i915_drop_caches
drm/i915: init sprites with univeral plane init function
drm/i915: Check of !HAS_PCH_SPLIT() in PCH transcoder funcs
drm/i915: Use HAS_GMCH_DISPLAY un underrun reporting code
drm/i915: Use IS_BROADWELL() instead of IS_GEN8() in forcewake code
drm/i915: Don't call gen8_fbc_sw_flush() on chv
...
Dave Airlie [Tue, 16 Sep 2014 04:59:16 +0000 (14:59 +1000)]
Merge branch 'drm-next-ast-fixes' of ssh://people.freedesktop.org/~/linux into drm-next
Pull in first set of changes from Ben for ast on ppc.
I've done a quick boot test on x86 and it still seems to boot.
* 'drm-next-ast-fixes' of ssh://people.freedesktop.org/~/linux:
drm/ast: Cleanup analog init code path
drm/ast: Don't assume DVO enabled means SIL164 on uninitialized chips
drm/ast: Properly initialize P2A base before using it in ast_init_3rdtx()
drm/ast: POST chip at probe time if VGA not enabled
drm/ast: Try to use MMIO registers when PIO isn't supported
Y.C. Chen [Thu, 28 Aug 2014 09:11:04 +0000 (17:11 +0800)]
drm/ast: Add reduced blanking modes for wide screen mode
Signed-off-by: Egbert Eich <eich@suse.com>
Tested-by: Steven You2 Liang <liangyou2@lenovo.com>
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
v3: based on [PATCH 1/2] drm/ast: Add missing entry to dclk_table[].
Add reduced blanking modes, improve mode matching to
identify these modes by thier sync polarities.
[airlied: argh whitespace damage]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 16 Sep 2014 01:28:52 +0000 (11:28 +1000)]
drm: backmerge tag 'v3.17-rc5' into drm-next
This is requested to get the fixes for intel and radeon into the
same tree for future development work.
i915_display.c: fix missing dev_priv conflict.
Dave Airlie [Mon, 15 Sep 2014 20:20:53 +0000 (06:20 +1000)]
Merge branch 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
This is the main merge request for Nouveau 3.18, overview:
- various bits of roy's gt21x clock work
- various bits of kepler memory clock work (don't get too excited, there's at least one more major bit left that's busting higher freqs)
- misc fan control improvements
- kepler hdmi infoframe fixes
- dp audio
- l2 cache + cbc improvements
* 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (68 commits)
drm/gt214-/disp: enable dp audio
drm/gt214-/kms: fix hda eld regression
drm/g94-/disp: calculate some dp audio constants
drm/gt214-/kms: perform hda codec setup on displayport too
drm/gk104-/disp: infoframe registers moved yet again on kepler
drm/nouveau/bios: parse older ramcfg/timing data like we do newer ones
drm/nva3/fb/ram: Per-partition regs
drm/nouveau/fb/ram: Support strided regs
drm/nv50/fb/ram: Store the number of partitions in the designated fields
drm/nv50/kms: Set VBLANK time in modeset script
drm/nouveau/bios: Add rammap support for version 1.0
drm/gf100-/pwr/memx: block host and fifo around reclock
drm/nouveau/pwr/memx: fix command ordering around block/unblock
drm/nouveau/pwr/memx: rename fb off/on to block/unblock
drm/nva3/clk: Pause the GPU before reclocking
drm/nouveau/gpio: rename g92 class to g94
drm/gk104-/fb/ram: move fb enable/disable to same place as nvidia
drm/gk104/fb/ram: twiddle some more bits when reclocking
drm/nouveau/bios: parse another large chunk of random memory config data
drm/gk104-/fb/ram: perform certain steps only when bios data differs
...
Ben Skeggs [Mon, 15 Sep 2014 11:29:05 +0000 (21:29 +1000)]
drm/gt214-/disp: enable dp audio
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 15 Sep 2014 11:11:51 +0000 (21:11 +1000)]
drm/gt214-/kms: fix hda eld regression
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 15 Sep 2014 05:55:56 +0000 (15:55 +1000)]
drm/g94-/disp: calculate some dp audio constants
NVIDIA appear to have tweaked the algorithm from GF110, this implements
the previous algorithm for them still.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 15 Sep 2014 05:20:47 +0000 (15:20 +1000)]
drm/gt214-/kms: perform hda codec setup on displayport too
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 15 Sep 2014 05:15:09 +0000 (15:15 +1000)]
drm/gk104-/disp: infoframe registers moved yet again on kepler
Thanks to Vincent Pelletier for pointing this out and providing a proof of
concept patch on the list.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 15 Sep 2014 02:30:08 +0000 (12:30 +1000)]
drm/nouveau/bios: parse older ramcfg/timing data like we do newer ones
Done after discussion with Roy.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Fri, 12 Sep 2014 16:00:16 +0000 (18:00 +0200)]
drm/nva3/fb/ram: Per-partition regs
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Fri, 12 Sep 2014 16:00:15 +0000 (18:00 +0200)]
drm/nouveau/fb/ram: Support strided regs
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Fri, 12 Sep 2014 16:00:14 +0000 (18:00 +0200)]
drm/nv50/fb/ram: Store the number of partitions in the designated fields
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Fri, 12 Sep 2014 16:00:13 +0000 (18:00 +0200)]
drm/nv50/kms: Set VBLANK time in modeset script
Solves blinking on reclocking memory. The value set is an underestimate, but
with non-reduced vblanking this should give us plenty of time
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Fri, 12 Sep 2014 16:00:12 +0000 (18:00 +0200)]
drm/nouveau/bios: Add rammap support for version 1.0
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 11 Sep 2014 13:32:20 +0000 (23:32 +1000)]
drm/gf100-/pwr/memx: block host and fifo around reclock
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 11 Sep 2014 13:04:22 +0000 (23:04 +1000)]
drm/nouveau/pwr/memx: fix command ordering around block/unblock
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 11 Sep 2014 12:59:13 +0000 (22:59 +1000)]
drm/nouveau/pwr/memx: rename fb off/on to block/unblock
More accurate as to the function of the opcodes. Not only is FB disabled,
but the host is prevented from touching the GPU. An upcoming patch for
Kepler will also halt PFIFO (as NVIDIA does).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Fri, 29 Aug 2014 10:27:42 +0000 (12:27 +0200)]
drm/nva3/clk: Pause the GPU before reclocking
V2: always call post correctly even if pre fails
V3: move function prototype to nva3.h
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Emil Velikov [Mon, 8 Sep 2014 19:27:57 +0000 (20:27 +0100)]
drm/nouveau/gpio: rename g92 class to g94
nv92 hardware has only 16 interrupt lines, while nv94 and later
has 32. Accessing 0xe0c{0,4} registers on nv92 can lead to incorrect
PDISP setup. This is a regression introduced with
commit
9d0f5ec9ee0fd5dc5fc1cc2cf559286431e406e3
Author: Ben Skeggs <bskeggs@redhat.com>
Date: Mon May 12 15:22:42 2014 +1000
gpio: split g92 class from nv50
Reported-by: estece on #nouveau
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 8 Sep 2014 05:21:48 +0000 (15:21 +1000)]
drm/gk104-/fb/ram: move fb enable/disable to same place as nvidia
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 3 Sep 2014 06:26:20 +0000 (16:26 +1000)]
drm/gk104/fb/ram: twiddle some more bits when reclocking
*when* this is done is only a rough approximation of what the binary driver
does.. need to investigate more to see if it matters
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 3 Sep 2014 06:25:47 +0000 (16:25 +1000)]
drm/nouveau/bios: parse another large chunk of random memory config data
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 8 Sep 2014 04:41:26 +0000 (14:41 +1000)]
drm/gk104-/fb/ram: perform certain steps only when bios data differs
Awful, awful. But, on the GK106 I have, some upcoming patches show
that this is actually necessary after all.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 8 Sep 2014 03:29:04 +0000 (13:29 +1000)]
drm/gk104-/fb/ram: parse ramcfg data for all frequencies up-front
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 8 Sep 2014 03:38:02 +0000 (13:38 +1000)]
drm/gk104-/fb/ram: use parsed timing data in mr routines
All the other chipsets should be moved over to this too. It's not needed
yet for the upcoming commits, so left this step as it'll conflict badly
with Roy's GT21x reclocking work.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 8 Sep 2014 02:48:31 +0000 (12:48 +1000)]
drm/nouveau/bios: parse freq ranges and timing id into ramcfg struct
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 8 Sep 2014 00:33:32 +0000 (10:33 +1000)]
drm/nouveau/bios: memset dcb struct to zero before parsing
Fixes type/mask calculation being based on uninitialised data for VGA
outputs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 3 Sep 2014 02:40:04 +0000 (12:40 +1000)]
drm/gk104/fb/ram: make use of training data provided by vbios
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 1 Sep 2014 05:42:45 +0000 (15:42 +1000)]
drm/nouveau/bios: add support for parsing table at BIT 'M' v2 + 0x09
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 1 Sep 2014 05:33:14 +0000 (15:33 +1000)]
drm/nouveau/bios: add support for parsing table at BIT 'M' v2 + 0x05
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 1 Sep 2014 01:15:21 +0000 (11:15 +1000)]
drm/gk104/fb/ram: fix register for second set of training data
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 1 Sep 2014 00:48:39 +0000 (10:48 +1000)]
drm/gk104/fb/ram: more random magic in fb init
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 1 Sep 2014 00:44:57 +0000 (10:44 +1000)]
drm/gk104/fb/ram: skip table entry for mode we're already in
NVIDIA binary driver appears to, not sure if it's for a good reason, but
grasping at straws for some GDDR5 reclocking issues here.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Fri, 5 Sep 2014 00:41:46 +0000 (02:41 +0200)]
drm/nouveau/fb/sddr2: Generate MR values
V2: Always disable DLL reset
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 4 Sep 2014 14:58:54 +0000 (16:58 +0200)]
drm/nouveau/fb/sddr3: Expand MR generation
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 4 Sep 2014 14:58:53 +0000 (16:58 +0200)]
drm/nva3/pwr/memx: Match blob's fb access behaviour
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 4 Sep 2014 14:58:52 +0000 (16:58 +0200)]
drm/nouveau/pwr/memx: Return debugging information
Time measured from disabling FB to re-enabling, PPWR_IN reveals status of
heads at the end of script. Helps debug various issues (like flicker).
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 4 Sep 2014 14:58:50 +0000 (16:58 +0200)]
drm/nouveau/pwr/memx: Make FB disable and enable explicit
Needs to be done after wait-for-VBLANK, and NVA3 requires register writes
in between.
Rather than hard-coding register writes, just split out fb_disable and
fb_enable.
v2. Squashed "fb/ramnve0: disable fb before reclocking"
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 4 Sep 2014 14:58:49 +0000 (16:58 +0200)]
drm/nva3/pwr/memx: Implement "wait for VBLANK"
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 24 Aug 2014 21:15:11 +0000 (23:15 +0200)]
drm/nouveau/therm/nv84+: do not expose non-calibrated internal temp sensor
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 24 Aug 2014 21:15:10 +0000 (23:15 +0200)]
drm/nouveau/therm: make sure the temperature settings are sane on nv84+
One of my nv92 has a calibrated internal sensor but it displays 0°C
as the default values use sw calibration values to force the temperature
to 0.
Since we cannot read the temperature from the adt7473 present on this board,
let's re-enable the internal reading!
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Mon, 25 Aug 2014 22:26:38 +0000 (00:26 +0200)]
drm/nouveau/subdev: add a pfuse subdev v2
We will use this subdev to disable temperature reading on cards that did not
get a sensor calibration in the factory.
v2:
- rename "nouveau_fuse_rd32" to "gxXXX_fuse_rd32" as adviced by Christian Costa
- fold the code a little as adviced by Emil Velikov
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 21 Aug 2014 11:45:17 +0000 (13:45 +0200)]
drm/nva3/clk: Set intermediate core clock on reclocking
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 21 Aug 2014 11:45:16 +0000 (13:45 +0200)]
drm/nva3/clk: For PLL clocks always make sure the PLL is not in use
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 21 Aug 2014 11:45:15 +0000 (13:45 +0200)]
drm/nva3/clk: Abort when PLL doesn't lock
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 21 Aug 2014 11:45:14 +0000 (13:45 +0200)]
drm/nva3/clk: HOST clock
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 21 Aug 2014 11:45:13 +0000 (13:45 +0200)]
drm/nva3/clk: Set PLL refclk
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Thu, 21 Aug 2014 11:45:12 +0000 (13:45 +0200)]
drm/nva3/clk: Parse clock control registers more accurately
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Pierre Moreau [Mon, 18 Aug 2014 20:32:53 +0000 (22:32 +0200)]
drm/nouveau: Fix duplicate definition of NV04_PFB_BOOT_0_*
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Pierre Moreau [Mon, 18 Aug 2014 20:43:24 +0000 (22:43 +0200)]
drm/nouveau: Display Nouveau boot options at launch
It can help to remove any ambiguity about which options were passed to Nouveau,
especially in case the user had some options set in /etc/modprobe.d/*.conf that
he forgot about, as they won't appear in a dmesg.
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 18 Aug 2014 02:41:57 +0000 (12:41 +1000)]
drm/nouveau/pwr: wait for scrubbers to finish before uploading new ucode
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:14 +0000 (17:33 +0200)]
drm/nouveau/pwr/fuc: make $r1-$r10 registers callee-saved in kernel.fuc
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:13 +0000 (17:33 +0200)]
drm/nouveau/pwr/fuc: add ld/st macros
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:12 +0000 (17:33 +0200)]
drm/nouveau/pwr: add helpers for delay-to-ticks and ticks-to-delay
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:11 +0000 (17:33 +0200)]
drm/nouveau/pwr: add some arith functions (mul32_32_64, subu64 and addu64)
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:10 +0000 (17:33 +0200)]
drm/nouveau/pwr: fix the timers implementation with concurent processes
The problem with the current implementation is that adding a timer improperly
checked which process would time up first by not taking into account how much
time elapsed since their timer got scheduled. Rework the re-scheduling
decision t fix this.
The catch with this fix is that we are limited to scheduling timers of up to
2^31 ticks to avoid any potential overflow. Since we are unlikely to need to
wait for more than a second, this won't be a problem :)
Another possible fix would be to decrement the timeouts of all processes but
it would duplicate a lot of code and dealing with edge cases wasn't pretty
last time I checked.
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:09 +0000 (17:33 +0200)]
drm/nouveau/ppwr: enable ppwr on gm107
For some reason, it is now required to wait a 20 µs after the 0x200 reset of
the engine.
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:08 +0000 (17:33 +0200)]
drm/gm107/therm: add PWM fan support v2
v2: change the copyright ownership from "Nouveau Community" to myself, as per
Illia's recommendation.
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:07 +0000 (17:33 +0200)]
drm/nouveau/therm/fan: do not use the pwm mode when the vbios tells us to use toggle
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:06 +0000 (17:33 +0200)]
drm/nouveau/bios/fan: add support for maxwell's fan management table v2
Re-use the therm-exported fan structure with only two minor modifications:
- pwm_freq: u16 -> u32;
- add fan_type (toggle or PWM)
v2:
- Do not memset the table to 0 as it erases the pre-set default values
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 05:16:16 +0000 (15:16 +1000)]
drm/nouveau/ltc: allocate tagram from memory that spans all partitions
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 04:30:52 +0000 (14:30 +1000)]
drm/nouveau/core/mm: allow allocation to be confined to a specific slice of heap
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 03:54:37 +0000 (13:54 +1000)]
drm/nouveau/core/mm: fill in holes with "allocated" nodes
The allocation algorithm doesn't expect there to be holes in the mm, which
causes its alignment/cutoff calculations to choke (and go negative) when
encountering the last chunk of a block before a hole.
The least expensive solution is to simply fill in any holes with nodes
that are pre-marked as being allocated.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 04:48:28 +0000 (14:48 +1000)]
drm/nouveau/core/mm: dump mm when trying to tear one down that still has allocations
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 03:40:42 +0000 (13:40 +1000)]
drm/nouveau/core/mm: modify test for if building a mm with holes in it
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 01:16:58 +0000 (11:16 +1000)]
drm/nouveau/core/mm: make it clearer what (type == 0) means
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 00:22:31 +0000 (10:22 +1000)]
drm/gf100/ltc: translate interrupt status into more meaningful names
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 00:01:13 +0000 (10:01 +1000)]
drm/nouveau/ltc: drop workaround for an interrupt storm that no longer happens
This is really the wrong thing to do, but at the time it was our only
option to prevent worse issues.
We no longer cause quite so much anger from LTC, so it's not needed.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 11 Aug 2014 04:38:10 +0000 (14:38 +1000)]
drm/nv50-/disp: add support for completion events
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 11 Aug 2014 03:56:56 +0000 (13:56 +1000)]
drm/nouveau/core: pass related object into notify constructor
The event source types/index might need to be derived from it.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 11 Aug 2014 02:23:23 +0000 (12:23 +1000)]
drm/nouveau/bar: ioremap only the areas that we're actually using
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dave Airlie [Mon, 15 Sep 2014 09:55:55 +0000 (19:55 +1000)]
Merge tag 'topic/core-stuff-2014-09-15' of git://anongit.freedesktop.org/drm-intel into drm-next
Here's the updated topic/core-stuff pull request with the two patches
already merged into drm-fixes dropped.
* tag 'topic/core-stuff-2014-09-15' of git://anongit.freedesktop.org/drm-intel:
drm: Drop modeset locking from crtc init function
drm/i915/hdmi: Enable pipe pixel replication for SD interlaced modes
drm/edid: Reduce horizontal timings for pixel replicated modes
drm: Include task->name and master status in debugfs clients info
drm/gem: Fix kerneldoc typo
drm: use c99 initializers in structures
drm: fix drm_modeset_lock.h kernel-doc notation
Daniel Vetter [Mon, 8 Sep 2014 07:02:49 +0000 (09:02 +0200)]
drm: Drop modeset locking from crtc init function
At driver init no one can access modeset objects and we're
single-threaded. So locking is just cargo-culting here. Worse, with
the new ww mutexes and ww mutex slowpath debugging the mutex_lock
might actually fail, and we don't have the full-blown ww recovery
dance.
Which then leads to fireworks when we try to unlock the not-locked
crtc lock.
An audit of all the functions called from here shows that none of them
contain locking checks, so there's also no reason to keep the locking
around just for consistency of caller contexts. Besides that I have
the rule (at least in i915) that such places where we take locks just
to simplify locking checks and not for correctness always require a
comment.
This regression was introduced in
commit
51fd371bbaf94018a1223b4e2cf20b9880fd92d4
Author: Rob Clark <robdclark@gmail.com>
Date: Tue Nov 19 12:10:12 2013 -0500
drm: convert crtc and connection_mutex to ww_mutex (v5)
v2: Don't drop the lock_init call, spotted by the 0day builder.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=83341
Cc: Rob Clark <robdclark@gmail.com>
Cc: thellstrom@vmware.com
Cc: maarten.lankhorst@canonical.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Clint Taylor [Wed, 3 Sep 2014 00:03:36 +0000 (17:03 -0700)]
drm/i915/hdmi: Enable pipe pixel replication for SD interlaced modes
Enable 2x pixel replication for modes the mode flag DBLCLK to double
horizontal timings and pixel clock across TMDS.
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Clint Taylor [Wed, 3 Sep 2014 00:03:35 +0000 (17:03 -0700)]
drm/edid: Reduce horizontal timings for pixel replicated modes
Pixel replicated modes should be non-2x horizontal timings and pixel
replicated by the HW across the HDMI cable at 2X pixel clock. Current
horizontal resolution of 1440 does not allow pixel duplication to
occur and scaling artifacts occur on the TV. HDMI certification
7-26 currently fails for all pixel replicated modes. This change will
allow HDMI certification with 480i/576i modes once pixel replication
is turned on.
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 2 Sep 2014 07:03:22 +0000 (08:03 +0100)]
drm: Include task->name and master status in debugfs clients info
Showing who is the current master is useful for trying to decypher
errors when trying to acquire master (e.g. a race with X taking over
from plymouth). By including the process name as well as the pid
simplifies the task of grabbing enough information remotely at the point
of error.
v2: Add the command column header and flesh out a couple of comments.
(David Herrmann)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Laurent Pinchart [Thu, 28 Aug 2014 12:34:36 +0000 (14:34 +0200)]
drm/gem: Fix kerneldoc typo
The drm_gem_private_object_init function is called drm_gem_object_init
in its kerneldoc. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Benjamin Herrenschmidt [Thu, 4 Sep 2014 07:45:26 +0000 (17:45 +1000)]
drm/ast: Cleanup analog init code path
Move the MMIO mangling to a separate routine and actually
disable the DVO output when using pure analog.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Benjamin Herrenschmidt [Thu, 4 Sep 2014 07:50:21 +0000 (17:50 +1000)]
drm/ast: Don't assume DVO enabled means SIL164 on uninitialized chips
It looks like the AST2400 comes up with the DVO enable bit set,
which causes us to incorrectly assume we have a SIL164 regardless
of the value of the scratch registers setup by the BMC firmware.
So let's limit that test to the case where the chip has already
been setup by a BIOS.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Benjamin Herrenschmidt [Thu, 4 Sep 2014 07:50:17 +0000 (17:50 +1000)]
drm/ast: Properly initialize P2A base before using it in ast_init_3rdtx()
If the P2A has been used to target other SOC registers before that
call, we're going to hit the wrong place so make sure we set the
base address up properly before using it.
(P2A stands for PCIe to AHB bridge and is the bride that allows
accessing the AST's internal AHB bus using a relocatable 64k
window in the second half of the PCIe MMIO BAR)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Benjamin Herrenschmidt [Thu, 4 Sep 2014 07:50:11 +0000 (17:50 +1000)]
drm/ast: POST chip at probe time if VGA not enabled
We need to do it on machines without a BIOS such as POWER8. Also
for detection to work without triggering PCIe errors, we need
to enable VGA early on, inside ast_detect_chip().
While touching those files, replace a few hard coded register
numbers with the corresponding symbolic constant.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Benjamin Herrenschmidt [Thu, 4 Sep 2014 07:44:18 +0000 (17:44 +1000)]
drm/ast: Try to use MMIO registers when PIO isn't supported
If the PIO resources haven't been assigned, then we have no choice
but try to use the MMIO version. This is the case for example on
POWER8 which doesn't support PIO at all.
Chips rev 0x20 or later have MMIO decoding enabled by default.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Mon, 15 Sep 2014 00:50:12 +0000 (17:50 -0700)]
Linux 3.17-rc5
Linus Torvalds [Mon, 15 Sep 2014 00:37:36 +0000 (17:37 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"double iput() on failure exit in lustre, racy removal of spliced
dentries from ->s_anon in __d_materialise_dentry() plus a bunch of
assorted RCU pathwalk fixes"
The RCU pathwalk fixes end up fixing a couple of cases where we
incorrectly dropped out of RCU walking, due to incorrect initialization
and testing of the sequence locks in some corner cases. Since dropping
out of RCU walk mode forces the slow locked accesses, those corner cases
slowed down quite dramatically.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
be careful with nd->inode in path_init() and follow_dotdot_rcu()
don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu()
fix bogus read_seqretry() checks introduced in
b37199e
move the call of __d_drop(anon) into __d_materialise_unique(dentry, anon)
[fix] lustre: d_make_root() does iput() on dentry allocation failure
Linus Torvalds [Mon, 15 Sep 2014 00:28:32 +0000 (17:28 -0700)]
vfs: avoid non-forwarding large load after small store in path lookup
The performance regression that Josef Bacik reported in the pathname
lookup (see commit
99d263d4c5b2 "vfs: fix bad hashing of dentries") made
me look at performance stability of the dcache code, just to verify that
the problem was actually fixed. That turned up a few other problems in
this area.
There are a few cases where we exit RCU lookup mode and go to the slow
serializing case when we shouldn't, Al has fixed those and they'll come
in with the next VFS pull.
But my performance verification also shows that link_path_walk() turns
out to have a very unfortunate 32-bit store of the length and hash of
the name we look up, followed by a 64-bit read of the combined hash_len
field. That screws up the processor store to load forwarding, causing
an unnecessary hickup in this critical routine.
It's caused by the ugly calling convention for the "hash_name()"
function, and easily fixed by just making hash_name() fill in the whole
'struct qstr' rather than passing it a pointer to just the hash value.
With that, the profile for this function looks much smoother.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 14 Sep 2014 19:28:08 +0000 (12:28 -0700)]
Merge branch 'parisc-3.17-1' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"The most important patch is a new Light Weigth Syscall (LWS) for 8,
16, 32 and 64 bit atomic CAS operations which is required in order to
be able to implement the atomic gcc builtins on our platform.
Other than that, we wire up the seccomp, getrandom and memfd_create
syscalls, fixes a minor off-by-one bug and a wrong printk string"
* 'parisc-3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Implement new LWS CAS supporting 64 bit operations.
parisc: Wire up seccomp, getrandom and memfd_create syscalls
parisc: dino: fix %d confusingly prefixed with 0x in format string
parisc: sys_hpux: NUL terminator is one past the end
Al Viro [Sun, 14 Sep 2014 01:59:43 +0000 (21:59 -0400)]
be careful with nd->inode in path_init() and follow_dotdot_rcu()
in the former we simply check if dentry is still valid after picking
its ->d_inode; in the latter we fetch ->d_inode in the same places
where we fetch dentry and its ->d_seq, under the same checks.
Cc: stable@vger.kernel.org # 2.6.38+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 14 Sep 2014 01:55:46 +0000 (21:55 -0400)]
don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu()
return the value instead, and have path_init() do the assignment. Broken by
"vfs: Fix absolute RCU path walk failures due to uninitialized seq number",
which was Cc-stable with 2.6.38+ as destination. This one should go where
it went.
To avoid dummy value returned in case when root is already set (it would do
no harm, actually, since the only caller that doesn't ignore the return value
is guaranteed to have nd->root *not* set, but it's more obvious that way),
lift the check into callers. And do the same to set_root(), to keep them
in sync.
Cc: stable@vger.kernel.org # 2.6.38+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sun, 14 Sep 2014 17:54:12 +0000 (10:54 -0700)]
Merge tag 'ntb-3.17' of git://github.com/jonmason/ntb
Pull ntb driver bugfixes from Jon Mason:
"NTB driver fixes for queue spread and buffer alignment. Also, update
to MAINTAINERS to reflect new e-mail address"
* tag 'ntb-3.17' of git://github.com/jonmason/ntb:
ntb: Add alignment check to meet hardware requirement
MAINTAINERS: update NTB info
NTB: correct the spread of queues over mw's
Linus Torvalds [Sun, 14 Sep 2014 17:37:10 +0000 (10:37 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull ARM irq chip fixes from Thomas Gleixner:
"Another pile of ARM specific irq chip fixlets:
- off by one bugs in the crossbar driver
- missing annotations
- a bunch of "make it compile" updates
I pulled the lot today from Jason, but it has been in -next for at
least a week"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: gic-v3: Declare rdist as __percpu pointer to __iomem pointer
irqchip: gic: Make gic_default_routable_irq_domain_ops static
irqchip: exynos-combiner: Fix compilation error on ARM64
irqchip: crossbar: Off by one bugs in init
irqchip: gic-v3: Tag all low level accessors __maybe_unused
irqchip: gic-v3: Only define gic_peek_irq() when building SMP
Thomas Gleixner [Sun, 14 Sep 2014 13:19:19 +0000 (15:19 +0200)]
Merge tag 'irqchip-urgent-3.17' of git://git.infradead.org/users/jcooper/linux into irq/urgent
irqchip fixes for v3.17 from Jason Cooper
- GIC/GICV3: Various fixlets
- crossbar: Fix off-by-one bug
- exynos-combiner: Fix arm64 build error
Dave Jiang [Thu, 28 Aug 2014 20:53:02 +0000 (13:53 -0700)]
ntb: Add alignment check to meet hardware requirement
The NTB translate register must have the value to be BAR size aligned.
This alignment check make sure that the DMA memory allocated has the
proper alignment. Another requirement for NTB to function properly with
memory window BAR size greater or equal to 4M is to use the CMA feature
in 3.16 kernel with the appropriate CONFIG_CMA_ALIGNMENT and
CONFIG_CMA_SIZE_MBYTES set.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Jon Mason [Thu, 19 Jun 2014 17:44:24 +0000 (10:44 -0700)]
MAINTAINERS: update NTB info
Update my contact info to my personal email address and add Dave Jiang.
Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Jon Mason [Thu, 19 Jun 2014 17:11:13 +0000 (10:11 -0700)]
NTB: correct the spread of queues over mw's
The detection of an uneven number of queues on the given memory windows
was not correct. The mw_num is zero based and the mod should be
division to spread them evenly over the mw's.
Signed-off-by: Jon Mason <jon.mason@intel.com>
Al Viro [Sun, 14 Sep 2014 01:50:45 +0000 (21:50 -0400)]
fix bogus read_seqretry() checks introduced in
b37199e
read_seqretry() returns true on mismatch, not on match...
Cc: stable@vger.kernel.org # 3.15+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Thu, 11 Sep 2014 22:55:50 +0000 (18:55 -0400)]
move the call of __d_drop(anon) into __d_materialise_unique(dentry, anon)
and lock the right list there
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 3 Sep 2014 17:11:09 +0000 (13:11 -0400)]
[fix] lustre: d_make_root() does iput() on dentry allocation failure
double-free is a bad thing
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>