OSDN Git Service
Aurelien Jarno [Wed, 13 Apr 2011 22:49:29 +0000 (00:49 +0200)]
softfloat-native: add float*_unordered_quiet() functions
Add float*_unordered_quiet() functions to march the softfloat versions.
As FPU status is not tracked with softfloat-native, they don't differ
from the signaling version.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Wed, 13 Apr 2011 22:49:29 +0000 (00:49 +0200)]
softfloat: add float*_unordered_{,quiet}() functions
Add float*_unordered() functions to softfloat, matching the softfloat-native
ones. Also add float*_unordered_quiet() functions to match the others
comparison functions.
This allow target-i386/ops_sse.h to be compiled with softfloat.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Wed, 13 Apr 2011 22:49:29 +0000 (00:49 +0200)]
target-i386: add floatx_{add,mul,sub} and use them
Add floatx_{add,mul,sub} defines, and use them instead of using direct
C operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Wed, 13 Apr 2011 22:49:29 +0000 (00:49 +0200)]
target-i386: use float unions from cpu-all.h
Use float unions from cpu-all.h instead of redefining new (wrong for arm)
ones in target-i386. This also allows building cpu-exec.o with softfloat.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Wed, 13 Apr 2011 22:49:29 +0000 (00:49 +0200)]
target-i386: use CPU_LDoubleU instead of a private union
Use CPU_LDoubleU in cpu_dump_state() instead of redefining a union for
doing the conversion.
Based on a patch from Laurent Vivier <laurent@vivier.eu>.
Cc: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Wed, 13 Apr 2011 22:49:29 +0000 (00:49 +0200)]
cpu-all.h: define CPU_LDoubleU
Add a CPU_LDoubleU type, matching the floatx80 definition and the long
double type on x86 hosts.
Based on a patch from Laurent Vivier <laurent@vivier.eu>.
Cc: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Wed, 13 Apr 2011 22:49:29 +0000 (00:49 +0200)]
softfloat: use GCC builtins to count the leading zeros
Softfloat has its own implementation to count the leading zeros. However
a lot of architectures have either a dedicated instruction or an
optimized to do that. When using GCC >= 3.4, this patch uses GCC builtins
instead of the handcoded implementation.
Note that I amware that QEMU_GNUC_PREREQ is defined in osdep.h and that
clz32() and clz64() are defined in host-utils.h, but I think it is better
to keep the softfloat implementation self contained.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Brad Hards [Wed, 13 Apr 2011 09:45:33 +0000 (19:45 +1000)]
usb: fix spelling errors in usb-linux.c
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Brad Hards [Wed, 13 Apr 2011 09:45:32 +0000 (19:45 +1000)]
usb: initialise data element in Linux USB_DISCONNECT ioctl
This isn't used, but leaving it empty causes valgrind noise.
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Brad Hards [Wed, 13 Apr 2011 09:45:31 +0000 (19:45 +1000)]
usb: trivial spelling fixes
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Brad Hards [Wed, 13 Apr 2011 06:42:16 +0000 (16:42 +1000)]
Makefile: Clean up after "make pdf"
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Wed, 13 Apr 2011 20:45:22 +0000 (22:45 +0200)]
Fix some typos in comments and documentation
helpfull -> helpful
usefull -> useful
cotrol -> control
and a grammar fix.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Blue Swirl [Sun, 3 Apr 2011 08:23:19 +0000 (08:23 +0000)]
migration: move some declarations to migration.h
Move a few migration related declarations to migration.h.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 27 Mar 2011 16:05:08 +0000 (16:05 +0000)]
Move CPU related functions to cpus.h
Move declarations of CPU related functions to cpus.h. Adjust the only user.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 27 Mar 2011 15:45:39 +0000 (15:45 +0000)]
Move clock related functions to qemu-timer.h
Move declarations for clock related functions from sysemu.h to qemu-timer.h.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 27 Mar 2011 09:04:57 +0000 (09:04 +0000)]
Move generic or OS function declarations to qemu-common.h
Move generic or OS related function declarations and macro
TFR to qemu-common.h.
Move win32 include directives to qemu-os-win32.h. While moving,
also add #include <winsock2.h> to fix a recent mingw32
build breakage.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 27 Mar 2011 14:31:31 +0000 (14:31 +0000)]
Use qemu-common.h or qemu-timer.h in place of sysemu.h
In some cases qemu-common.h or qemu-timer.h can be used in place
of sysemu.h.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 27 Mar 2011 14:12:29 +0000 (14:12 +0000)]
Remove unused sysemu.h include directives
Remove unused sysemu.h include directives to speed up build
with the following patches.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 27 Mar 2011 09:07:54 +0000 (09:07 +0000)]
json-lexer: fix conflict with mingw32 ERROR definition
The name ERROR is too generic, it conflicts with mingw32 ERROR definition.
Replace ERROR with IN_ERROR.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Stefan Weil [Thu, 14 Apr 2011 17:19:00 +0000 (19:19 +0200)]
sparc: Fix assertion caused by empty memory slot with 0 byte
If the memory size given on the command line is equal to the
maximum size of memory defined by the hardware, there is no
"empty slot" after physical memory.
The following command
qemu-system-sparc -m 256
raised an assertion:
exec.c:2614: cpu_register_physical_memory_offset: Assertion `size' failed
This can be fixed either at the caller side (don't call empty_slot_init)
or in empty_slot_init (do nothing) when size == 0. The second solution
was choosen here because it is more robust.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Paolo Bonzini [Wed, 13 Apr 2011 08:03:46 +0000 (10:03 +0200)]
qemu_next_deadline should not consider host-time timers
It is purely for icount-based virtual timers. And now that we got the
code right, rename the function to clarify the intended scope.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Paolo Bonzini [Wed, 13 Apr 2011 08:03:45 +0000 (10:03 +0200)]
Revert wrong fixes for -icount in the iothread case
This reverts commits
225d02cd and
c9f7383c. While some parts of
the latter could be saved, I preferred a smooth, complete revert.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Paolo Bonzini [Wed, 13 Apr 2011 08:03:44 +0000 (10:03 +0200)]
enable vm_clock to "warp" in the iothread+icount case
The previous patch however is not enough, because if the virtual CPU
goes to sleep waiting for a future timer interrupt to wake it up, qemu
deadlocks. The timer interrupt never comes because time is driven by
icount, but the vCPU doesn't run any insns.
You could say that VCPUs should never go to sleep in icount
mode if there is a pending vm_clock timer; rather time should
just warp to the next vm_clock event with no sleep ever taking place.
Even better, you can sleep for some time related to the
time left until the next event, to avoid that the warps are too visible
externally; for example, you could be sending network packets continously
instead of every 100ms.
This is what this patch implements. qemu_clock_warp is called: 1)
whenever a vm_clock timer is adjusted, to ensure the warp_timer is
synchronized; 2) at strategic points in the CPU thread, to make sure
the insn counter is synchronized before the CPU starts running.
In any case, the warp_timer is disabled while the CPU is running,
because the insn counter will then be making progress on its own.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Paolo Bonzini [Wed, 13 Apr 2011 08:03:43 +0000 (10:03 +0200)]
really fix -icount in the iothread case
The correct fix for -icount is to consider the biggest difference
between iothread and non-iothread modes. In the traditional model,
CPUs run _before_ the iothread calls select (or WaitForMultipleObjects
for Win32). In the iothread model, CPUs run while the iothread
isn't holding the mutex, i.e. _during_ those same calls.
So, the iothread should always block as long as possible to let
the CPUs run smoothly---the timeout might as well be infinite---and
either the OS or the CPU thread itself will let the iothread know
when something happens. At this point, the iothread wakes up and
interrupts the CPU.
This is exactly the approach that this patch takes: when cpu_exec_all
returns in -icount mode, and it is because a vm_clock deadline has
been met, it wakes up the iothread to process the timers. This is
really the "bulk" of fixing icount.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Peter Maydell [Thu, 14 Apr 2011 13:11:56 +0000 (14:11 +0100)]
tests/test-mmap.c: Check mmap() return value before using it
Correct the position of a "stop if MAP_FAILED" check in the mmap()
tests, so that if mmap() does fail we print a failure message
rather than segfaulting inside memcpy().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Peter Maydell [Mon, 11 Apr 2011 15:32:08 +0000 (16:32 +0100)]
target-arm: Don't overflow when calculating value for signed VABAL
In the VABAL instruction we take the absolute difference of two
values of size x and store it in a result of size 2x. This means
we have to be careful to calculate the absolute difference using
a wide enough type that we don't accidentally overflow.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Anthony Liguori [Wed, 13 Apr 2011 13:16:53 +0000 (08:16 -0500)]
Revert SeaBIOS change due to overzealous commit -a
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Wed, 13 Apr 2011 12:41:19 +0000 (07:41 -0500)]
lm32: fix build breakage due to uninitialized variable 'r'
gcc 4.5.2 correctly complains that r is potentially uninitialized in this
function.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Mitnick Lyu [Wed, 13 Apr 2011 09:30:54 +0000 (17:30 +0800)]
vpc.c: Use get_option_parameter() does the search
Use get_option_parameter() to instead of duplicating the loop, and
use BDRV_SECTOR_SIZE to instead of 512
Signed-off-by: Mitnick Lyu <mitnick.lyu@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Amit Shah [Tue, 12 Apr 2011 16:06:07 +0000 (21:36 +0530)]
atapi: GESN: implement 'media' subcommand
Implement the 'media' sub-command of the GET_EVENT_STATUS_NOTIFICATION
command. This helps us report tray open, tray closed, no media, media
present states to the guest.
Newer Linux kernels (2.6.38+) rely on this command to revalidate discs
after media change.
This patch also sends out tray open/closed status to the guest driver
when requested e.g. via the CDROM_DRIVE_STATUS ioctl (thanks Markus).
Without such notification, the guest and qemu's tray open/close status
was frequently out of sync, causing installers like Anaconda detecting
no disc instead of tray open, confusing them terribly.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Amit Shah [Tue, 12 Apr 2011 16:06:06 +0000 (21:36 +0530)]
atapi: GESN: Standardise event response handling for future additions
Handle GET_EVENT_STATUS_NOTIFICATION's No Event Available response in a
generic way so that future additions to the code to handle other
response types is easier.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Amit Shah [Tue, 12 Apr 2011 16:06:05 +0000 (21:36 +0530)]
atapi: GESN: Use structs for commonly-used field types
Instead of using magic numbers, use structs that are more descriptive of
the fields being used.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Amit Shah [Tue, 12 Apr 2011 16:06:04 +0000 (21:36 +0530)]
atapi: Move GET_EVENT_STATUS_NOTIFICATION command handling to its own function
This makes the code more readable.
Also, there's a block like:
if () {
...
} else {
...
}
Split that into
if () {
...
return;
}
...
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Amit Shah [Tue, 12 Apr 2011 16:06:03 +0000 (21:36 +0530)]
atapi: Allow GET_EVENT_STATUS_NOTIFICATION after media change
After a media change, the only commands allowed from the guest were
REQUEST_SENSE and INQUIRY. The guest may also issue
GET_EVENT_STATUS_NOTIFICATION commands to get media
changed notification.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Amit Shah [Sat, 9 Apr 2011 10:24:39 +0000 (15:54 +0530)]
atapi: Report correct errors on guest eject request
Table 629 of the MMC-5 spec mentions two different error conditions when
a CDROM eject is requested: a) while a disc is inserted and b) while a
disc is not inserted.
Ensure we return the appropriate error for the present condition of the
drive and disc status.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Amit Shah [Sat, 9 Apr 2011 10:24:38 +0000 (15:54 +0530)]
atapi: Drives can be locked without media present
Drivers are free to lock drives without any media present. Such a
condition should not result in an error condition.
See Table 341 in MMC-5 spec for details.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Anthony Liguori [Fri, 17 Dec 2010 15:58:22 +0000 (15:58 +0000)]
qed: Add support for zero clusters
Zero clusters are similar to unallocated clusters except instead of reading
their value from a backing file when one is available, the cluster is always
read as zero.
This implements read support only. At this stage, QED will never write a
zero cluster.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Fri, 17 Dec 2010 15:58:21 +0000 (15:58 +0000)]
docs: Describe zero data clusters in QED specification
Zero data clusters are a space-efficient way of storing zeroed regions
of the image.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Peter Maydell [Tue, 12 Apr 2011 12:56:41 +0000 (13:56 +0100)]
target-arm: Detect tininess before rounding for FP operations
The ARM architecture mandates that we detect tininess before rounding,
so set the softfloat fp_status up appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Tue, 12 Apr 2011 12:56:40 +0000 (13:56 +0100)]
softfloat: Add setter function for tininess detection mode
Add a setter function for the underflow tininess detection mode,
in line with the similar functions for other parts of the float status
structure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Juha Riihimäki [Mon, 11 Apr 2011 15:26:23 +0000 (16:26 +0100)]
target-arm: Handle UNDEF cases for VDUP (scalar)
Handle the UNDEF cases for VDUP(scalar):
imm4 == x000
Q == 1 && Vd<0> == 1
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Mon, 11 Apr 2011 15:26:22 +0000 (16:26 +0100)]
target-arm: Treat UNPREDICTABLE VTBL, VTBX case as UNDEF
Catch the UNPREDICTABLE case for Neon VTBL,VTBX, and UNDEF it
rather than allowing the helper function to index off the end
of the register file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Mon, 11 Apr 2011 15:26:21 +0000 (16:26 +0100)]
target-arm: Handle UNDEF cases for Neon 2 register misc forms
Add missing UNDEF checks for Neon "two register miscellaneous" forms:
* all instructions except VMOVN,VQMOVN must UNDEF
if Q==1 && (Vd<0> == 1 || Vm<0> == 1)
* VMOVN,VQMOVN,VCVT.F16.F32 UNDEF if Q == 1 || Vm<0> == 1
* VSHLL,VCVT.F32.F16 UNDEF if Q == 1 || Vd<0> == 1
(The only other UNDEF case is VZIP,VUZP if Q == 0 && size == 10,
which we already handle.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Mon, 11 Apr 2011 15:26:20 +0000 (16:26 +0100)]
target-arm: Simplify checking of size field in Neon 2reg-misc forms
Many of the Neon "2 register misc" instruction forms require invalid
size fields to cause the instruction to UNDEF. Pull this information
out into an array; this simplifies the code and also means we can do
the check early and avoid the problem of leaking TCG temporaries in
the illegal_op case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Mon, 11 Apr 2011 15:26:19 +0000 (16:26 +0100)]
target-arm: Handle UNDEF cases for VEXT
VEXT must UNDEF if Q == 1 && (Vd<0> == 1 || Vr<0> == 1 || Vm<0> == 1)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Mon, 11 Apr 2011 15:26:18 +0000 (16:26 +0100)]
target-arm: Handle UNDEF cases for Neon 2 regs + scalar forms
Add missing checks for cases which must UNDEF in the Neon "2 registers and
a scalar" data processing instruction space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Mon, 11 Apr 2011 15:26:17 +0000 (16:26 +0100)]
target-arm: Handle UNDEF cases for Neon 3-regs-different-widths
Add missing UNDEF checks for instructions in the Neon "3 registers of
different widths" data processing space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Mon, 11 Apr 2011 15:26:16 +0000 (16:26 +0100)]
target-arm: Handle UNDEF cases for Neon invalid modified-immediates
For Neon "one register and a modified immediate value" forms, the
combination op=1 cmode=1111 is unallocated and should UNDEF.
All instructions of this form also UNDEF if Q == 1 and Vd<0> == 1.
We also add a comment on the only UNPREDICTABLE in this space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Mon, 11 Apr 2011 15:26:15 +0000 (16:26 +0100)]
target-arm: Collapse VSRI case into VSHL, VSLI
Collapse some switch cases for VSRI into those for VSHL, VSLI,
since the bodies are the same. (This is not completely obvious
for the size < 3 case, but since for VSRI we know U=1 the
GEN_NEON_INTEGER_OP() expansion is equivalent to the open-coded
VSHL/VSLI case.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Mon, 11 Apr 2011 15:26:14 +0000 (16:26 +0100)]
target-arm: Handle UNDEF cases for Neon "2 regs and shift" insns
Correctly handle all the UNDEF cases for Neon instructions of the
"2 registers and shift" form, and make sure that we check for these
cases early enough not to leak TCG temporaries.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Juha Riihimäki [Mon, 11 Apr 2011 15:26:13 +0000 (16:26 +0100)]
target-arm: Simplify three-register pairwise code
Since we know that the case of (pairwise && q) has been caught
earlier, we can simplify the register setup code for each pass
in the three-register-same-size Neon loop.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Mon, 11 Apr 2011 15:26:12 +0000 (16:26 +0100)]
target-arm: Handle UNDEF cases for Neon 3-regs-same insns
Correct the handling of UNDEF cases for the NEON "3 registers same
size" forms, by adding missing checks and rationalising some others
so they are done early enough to avoid leaking TCG temporaries.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Mon, 11 Apr 2011 15:26:11 +0000 (16:26 +0100)]
target-arm: Use lookup table for size check on Neon 3-reg-same insns
Simplify the checks for invalid size values for the Neon "three registers
of the same size" instruction forms (and add them where they were missing)
by using a lookup table.
This includes adding symbolic constants for the op values in this space,
since we now use them in multiple places.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Wen Congyang [Tue, 12 Apr 2011 09:27:44 +0000 (17:27 +0800)]
fix acpi regression
This bug is introduced by commit
23910d3f.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Stefan Weil [Sun, 10 Apr 2011 16:23:39 +0000 (18:23 +0200)]
Replace cpu_physical_memory_rw were possible
Using cpu_physical_memory_read, cpu_physical_memory_write and ldub_phys
improves readability and allows removing some type casts.
lduw_phys and ldl_phys were not used because both require aligned
addresses. Therefore it is not possible to simply replace existing
calls by one of these functions.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Stefan Weil [Sat, 26 Mar 2011 20:11:05 +0000 (21:11 +0100)]
monitor: Remove some type casts which are no longer needed
All other type casts in calls of cpu_physical_memory_read are
used by hardware emulations and will be fixed by separate patches.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Stefan Weil [Sat, 26 Mar 2011 20:06:56 +0000 (21:06 +0100)]
exec: Remove a type cast which is no longer needed
All other type casts in calls of cpu_physical_memory_write are
used by hardware emulations and will be fixed by separate patches.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Stefan Weil [Sun, 10 Apr 2011 15:28:56 +0000 (17:28 +0200)]
cpu-common: Modify cpu_physical_memory_read and cpu_physical_memory_write
A lot of calls don't operate on bytes but on words or on structured data.
So instead of a pointer to uint8_t, a void pointer is the better choice.
This allows removing many type casts.
(Some very early implementations of memcpy used char pointers
which were replaced by void pointers for the same reason).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Michael Walle [Sat, 9 Apr 2011 21:13:20 +0000 (23:13 +0200)]
configure: disable opengl per default
There is a bug in nvidia's binary GPU driver, which causes a segmentation
fault if linked to libGL.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Sun, 10 Apr 2011 19:09:12 +0000 (21:09 +0200)]
target-ppc: remove #ifdef FLOAT128
Now that PPC defaults to softfloat which always provides float128
support, there is no need to keep two version of the code, depending if
float128 support is available or not. Suggested by Peter Maydell.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Sun, 10 Apr 2011 19:09:12 +0000 (21:09 +0200)]
target-sh4: get rid of CPU_{Float,Double}U
SH4 is always using softfloat, so it's possible to have helpers directly
taking float32 or float64 value. This allow to get rid of conversions
through CPU_{Float,Double}U.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Guan Xuetao [Tue, 12 Apr 2011 08:27:03 +0000 (16:27 +0800)]
unicore32: necessary modifications for other files to support unicore32
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Guan Xuetao [Tue, 12 Apr 2011 08:26:27 +0000 (16:26 +0800)]
unicore32: add necessry headers in linux-user/unicore32 for unicore32 support
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Guan Xuetao [Tue, 12 Apr 2011 08:25:59 +0000 (16:25 +0800)]
unicore32: add target-unicore32 directory for unicore32-linux-user support
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Edgar E. Iglesias [Mon, 11 Apr 2011 22:48:33 +0000 (00:48 +0200)]
microblaze: Add partial decoding of stream insns
Based on a patch from: Alejandro Cabrera <aldaya@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Mon, 11 Apr 2011 22:42:28 +0000 (00:42 +0200)]
microblaze: Add stream-insn related constants
Based on a patch from: Alejandro Cabrera <aldaya@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Mon, 11 Apr 2011 21:57:07 +0000 (23:57 +0200)]
microblaze: Correct ec mask in debug print
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Mon, 11 Apr 2011 21:55:42 +0000 (23:55 +0200)]
microblaze: Add constant for exception-code mask
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Alejandro Cabrera [Mon, 11 Apr 2011 21:07:58 +0000 (23:07 +0200)]
microblaze: Correct MMU_ZONES mask
Signed-off-by: Alejandro Cabrera <aldaya@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Blue Swirl [Sat, 9 Apr 2011 14:25:25 +0000 (14:25 +0000)]
ppc: remove a write-only variable
Remove a write-only variable, spotted by GCC 4.6.0:
/src/qemu/hw/ppc.c: In function 'power7_set_irq':
/src/qemu/hw/ppc.c:255:9: error: variable 'cur_level' set but not used [-Werror=unused-but-set-variable]
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Alexander Graf [Mon, 4 Apr 2011 14:32:10 +0000 (16:32 +0200)]
s390x: fix virtio feature bitmap
The feature bitmap in the s390 virtio machine is little endian. To
address for that, we need to bswap the values after reading them out.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Alexander Graf [Mon, 4 Apr 2011 14:32:11 +0000 (16:32 +0200)]
s390x: set alignment for long to 8
The alignment for longs on s390x is 8. That's the only place where it differs
from the default alignments found in configure already. The example alignment
program from Laurent printed the following on a real s390x:
alignof(short) 2
alignof(int) 4
alignof(long) 8
alignof(long long) 8
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Jan Kiszka [Sun, 10 Apr 2011 07:35:42 +0000 (09:35 +0200)]
musicpal: Fix registration of MMIO-less sysbus devices
The proper way to signal that a sysbus devices need no MMIO region is to
pass -1 to sysbus_create_simple.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Isaku Yamahata [Fri, 25 Mar 2011 10:54:41 +0000 (19:54 +0900)]
acpi, acpi_piix: factor out GPE logic
factor out ACPI GPE logic. Later it will be used by ICH9 ACPI.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Dmitry Eremin-Solenikov [Mon, 4 Apr 2011 13:38:44 +0000 (17:38 +0400)]
arm: basic support for ARMv4/ARMv4T emulation
Currently target-arm/ assumes at least ARMv5 core. Add support for
handling also ARMv4/ARMv4T. This changes the following instructions:
BX(v4T and later)
BKPT, BLX, CDP2, CLZ, LDC2, LDRD, MCRR, MCRR2, MRRC, MCRR, MRC2, MRRC,
MRRC2, PLD QADD, QDADD, QDSUB, QSUB, STRD, SMLAxy, SMLALxy, SMLAWxy,
SMULxy, SMULWxy, STC2 (v5 and later)
All instructions that are "v5TE and later" are also bound to just v5, as
that's how it was before.
This patch doesn _not_ include disabling of cp15 access and base-updated
data abort model (that will be required to emulate chips based on a
ARM7TDMI), because:
* no ARM7TDMI chips are currently emulated (or planned)
* those features aren't strictly necessary for my purposes (SA-1 core
emulation).
All v5 models are handled as they are v5T. Internally we still have a
check if the model is a v5(T) or v5TE, but as all emulated cores are
v5TE, those two cases are simply aliased (for now).
Patch is heavily based on patch by Filip Navara <filip.navara@gmail.com>
which in turn is based on work by Ulrich Hecht <uli@suse.de> and Vincent
Sanders <vince@kyllikki.org>.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Stefan Weil [Sat, 2 Apr 2011 11:36:31 +0000 (13:36 +0200)]
Fix conversions from pointer to tcg_target_long
tcg_gen_exit_tb takes a parameter of type tcg_target_long,
so the type casts of pointer to long should be replaced by
type casts of pointer to tcg_target_long (suggested by Blue Swirl).
These changes are needed for build environments where
sizeof(long) != sizeof(void *), especially for w64.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Michael Tokarev [Mon, 21 Mar 2011 08:34:35 +0000 (09:34 +0100)]
vnc: tight: Fix crash after 2GB of output
fix 2Gb integer overflow in in VNC tight and zlib encodings
As found by Roland Dreier <roland@purestorage.com> (excellent
catch!), when amount of VNC compressed data produced by zlib
and sent to client exceeds 2Gb, integer overflow occurs because
currently, we calculate amount of data produced at each step by
comparing saved total_out with new total_out, and total_out is
something which grows without bounds. Compare it with previous
avail_out instead of total_out, and leave total_out alone.
The same code is used in vnc-enc-tight.c and vnc-enc-zlib.c,
so fix both cases.
There, there's no actual need to save previous_out value, since
capacity-offset (which is how that value is calculated) stays
the same so it can be recalculated again after call to deflate(),
but whole thing becomes less readable this way.
Reported-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Isaku Yamahata [Tue, 5 Apr 2011 02:07:06 +0000 (11:07 +0900)]
smbus_eeprom: consolidate smbus eeprom creation oc pc_piix, mips_mapta, mips_fulong
consolidate smbus initialization for pc_piix, mips_malta and mips_fulong.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Atsushi Nemoto [Tue, 5 Apr 2011 14:34:04 +0000 (23:34 +0900)]
lan9118: Ignore write to MAC_VLAN1 register
On Mon, 4 Apr 2011 20:15:30 +0200, Aurelien Jarno <aurelien@aurel32.net> wrote:
> Is it really safe ignoring write to this register? If yes, it's probably
> a good idea to explain why in a comment. In any case, if supporting this
> register is easy to do, it would be the best option.
I think it is safe. Please see an updated comment below.
And though implementing this register might be possible, I suppose it
is not worth to supporting FrameTooLong detection, for now at least.
Thank you for comments.
>8---------------------------------------------------------------------
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Tue, 5 Apr 2011 23:12:07 +0900
Subject: [PATCH] lan9118: Ignore write to MAC_VLAN1 register
Since linux 2.6.38, smsc911x driver writes to VLAN1 registger.
Since this register only affects FrameTooLong detection, ignoring
write to this register should be safe.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Isaku Yamahata [Fri, 25 Mar 2011 10:54:40 +0000 (19:54 +0900)]
acpi, acpi_piix, vt82c686: factor out PM1_CNT logic
factor out ACPI PM1_CNT logic. This will be used by ich9 acpi.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Huacai Chen <zltjiangshi@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Isaku Yamahata [Fri, 25 Mar 2011 10:54:39 +0000 (19:54 +0900)]
acpi, acpi_piix, vt82c686: factor out PM1a EVT logic
factor out ACPI PM1a EVT logic.
Later this will be used by ich9 acpi.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Huacai Chen <zltjiangshi@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Isaku Yamahata [Fri, 25 Mar 2011 10:54:38 +0000 (19:54 +0900)]
acpi, acpi_piix, vt82c686: factor out PM_TMR logic
factor out PM_TMR logic. Later This will be used by ich9 acpi.
Also fixes the same bug in vt82c686.c that was fixed by the following
commits.
> commit
055479feab63607b8042bb8ebb2e0523f17cbc4e
> Author: aliguori <aliguori@
c046a42c-6fe2-441c-8c8c-
71466251a162>
> Date: Wed Jan 21 16:31:20 2009 +0000
>
> Always return latest pmsts instead of the old one (Xiantao Zhang)
>
> It may lead to the issue when booting windows guests with acpi=1
> if return the old pmsts.
>
> Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Huacai Chen <zltjiangshi@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Jordan Justen [Sun, 3 Apr 2011 20:16:26 +0000 (13:16 -0700)]
hw/pflash_cfi02: Fix lazy reset of ROMD mode
When checking pfl->rom_mode for when to lazily reenter ROMD mode,
the value was check was the opposite of what it should have been.
This prevent the part from returning to ROMD mode after a write
was made to the CFI rom region.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Scott Wood [Fri, 8 Apr 2011 19:15:50 +0000 (14:15 -0500)]
configure: avoid basename usage message
basename prints a missing-argument error when sdlconfig is empty
and we're cross-compiling.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Scott Wood [Fri, 8 Apr 2011 22:06:37 +0000 (17:06 -0500)]
mpc85xx_pci_map_irq: change "unknow" to "unknown"
Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Brad Hards [Sat, 9 Apr 2011 02:11:36 +0000 (12:11 +1000)]
event: trivial coding style fixes
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Adam Lackorzynski [Fri, 8 Apr 2011 06:48:42 +0000 (08:48 +0200)]
multiboot: Quote filename in error message
Quote filename in error message to spot possible whitespace character in
the filename and make error message more meaningful.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
David Gibson [Fri, 8 Apr 2011 10:08:25 +0000 (20:08 +1000)]
ppce500_mpc8544ds: Fix compile with --enable-debug and --disable-kvm
When configured with --enable-debug, we compile without optimization.
This means that the function mpc8544_copy_soc_cell() in ppce500_mpc8544ds.c
is not optimized out, even though it is never called without kvm. That in
turn causes a link failure, because it calls the function
kvmppc_read_host_property() which is in kvm_ppc.o and therefore not
included in a --disable-kvm build.
This patch fixes the problem by providing a dummy stub for
kvmppc_read_host_property() in kvm_ppc.h when !CONFIG_KVM.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Tue, 5 Apr 2011 05:12:11 +0000 (15:12 +1000)]
Use existing helper function to implement popcntd instruction
The recent patches adding partial support for POWER7 cpu emulation included
implementing the popcntd instruction. The support for this was open coded,
but host-utils.h already included a function implementing an equivalent
population count function, which uses a gcc builtin (which can use special
host instructions) if available.
This patch makes the popcntd implementation use the existing, potentially
faster, implementation.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Tue, 5 Apr 2011 05:12:10 +0000 (15:12 +1000)]
Delay creation of pseries device tree until reset
At present, the 'pseries' machine creates a flattened device tree in the
machine->init function to pass to either the guest kernel or to firmware.
However, the machine->init function runs before processing of -device
command line options, which means that the device tree so created will
be (incorrectly) missing devices specified that way.
Supplying a correct device tree is, in any case, part of the required
platform entry conditions. Therefore, this patch moves the creation and
loading of the device tree from machine->init to a reset callback. The
setup of entry point address and initial register state moves with it,
which leads to a slight cleanup.
This is not, alas, quite enough to make a fully working reset for pseries.
For that we would need to reload the firmware images, which on this
machine are loaded into RAM. It's a step in the right direction, though.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Tue, 5 Apr 2011 05:12:09 +0000 (15:12 +1000)]
pseries: Abolish envs array
Currently the pseries machine init code builds up an array, envs, of
CPUState pointers for all the cpus in the system. This is kind of
pointless, given the generic code already has a perfectly good linked list
of the cpus.
In addition, there are a number of places which assume that the cpu's
cpu_index field is equal to its index in this array. This is true in
practice, because cpu_index values are just assigned sequentially, but
it's conceptually incorrect and may not always be true.
Therefore, this patch abolishes the envs array, and explicitly uses the
generic cpu linked list and cpu_index values throughout.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Stefan Weil [Sun, 3 Apr 2011 16:21:24 +0000 (18:21 +0200)]
spapr_vscsi: Set uninitialized variable
cppcheck reports this error:
hw/spapr_vscsi.c:274: error: Uninitialized variable: rc
If llen == 0, rc was indeed used without being initialized.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Scott Wood [Mon, 4 Oct 2010 11:15:58 +0000 (11:15 +0000)]
Don't call cpu_synchronize_state() from machine init.
This will deadlock when the I/O thread is used, since the
CPU thread is blocked waiting for qemu_system_ready.
The synchronization is unnecessary since this is before
cpu_synchronize_all_post_init().
Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Anthony Liguori [Thu, 7 Apr 2011 14:56:09 +0000 (09:56 -0500)]
Merge remote branch 'kwolf/for-anthony' into staging
Christoph Hellwig [Wed, 6 Apr 2011 18:28:34 +0000 (20:28 +0200)]
virtio-blk: fail unaligned requests
Like all block drivers virtio-blk should not allow small than block size
granularity access. But given that the protocol specifies a
byte unit length field we currently accept such requests, which cause
qemu to abort() in lower layers. Add checks to the main read and
write handlers to catch them early.
Reported-by: Conor Murphy <conor_murphy_virt@hotmail.com>
Tested-by: Conor Murphy <conor_murphy_virt@hotmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alexey Kardashevskiy [Thu, 7 Apr 2011 03:02:04 +0000 (13:02 +1000)]
virtio-balloon: fixed endianness bug in the config space
The specification for the virtio balloon device requres that the values
in the config space be encoded little-endian. This differs from most
virtio things, where guest-native endian is the norm.
Currently, the qemu virtio-balloon code correctly makes the conversion
on get_config(), but doesn't on set_config for the 'actual' field. The
kernel driver, on the other hand, correctly converts when setting the
actual field, but does not convert when reading the config space. The
upshot is that virtio-balloon will only work correctly if both host and
guest are LE, making all the conversions nops.
This patch corrects the qemu side, correctly doing host-native <-> LE
conversions when accessing the config space. This won't break any setups
that aren't already broken, and fixes the case of BE host, LE guest.
Fixing the BE guest case will require kernel fixes as well.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Alexey Kardashevskiy [Thu, 7 Apr 2011 03:02:03 +0000 (13:02 +1000)]
virtio-9p: fixed LE-to-host conversion bug when QEMU is called from guest
The 9p code already contains an attempt at the necessary endian
conversions, but it's broken.
The code which does conversion from host to guest does it correctly
and this code was copied to the function which does guest to host
conversion. However the copied code hasn't been correctly updated, so
it first endian converts some garbage on the stack and then overwrites
it with a field from incoming packet without conversion.
The patch fixes the mistakes.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Alexey Kardashevskiy [Thu, 7 Apr 2011 03:02:02 +0000 (13:02 +1000)]
spapr_llan: Fix warning when compiled with -dDEBUG
Compiling with the DEBUG macro causes leaves hw/spapr_llan.c with an
unused variable, which is treated as an error in the qemu build.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Michael Tokarev [Wed, 6 Apr 2011 13:51:59 +0000 (17:51 +0400)]
qdev: Fix comment around qdev_init_nofail()
In previous life qdev_init_nofail() used to call hw_error() which
did register dump and other scary things. Now it calls
error_report() and does a regular exit(1). Fix the comment
to match reality.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Brad Hards [Mon, 4 Apr 2011 21:54:04 +0000 (07:54 +1000)]
usb-ccid: Spelling fixes
While looking at David Gibson's build-fix for hw/usb-ccid.c, I noticed a spello
in a comment on the following (unchanged) line.
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>