OSDN Git Service
Yan, Zheng [Mon, 24 Apr 2017 03:56:50 +0000 (11:56 +0800)]
ceph: choose readdir frag based on previous readdir reply
The dirfragtree is lazily updated, it's not always accurate. Infinite
loops happens in following circumstance.
- client send request to read frag A
- frag A has been fragmented into frag B and C. So mds fills the reply
with contents of frag B
- client wants to read next frag C. ceph_choose_frag(frag value of C)
return frag A.
The fix is using previous readdir reply to calculate next readdir frag
when possible.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ilya Dryomov [Thu, 13 Apr 2017 10:17:39 +0000 (12:17 +0200)]
rbd: exclusive map option
Support disabling automatic exclusive lock transfers to allow users
to be in charge of which node should own the lock while being able to
reuse exclusive lock's built-in blacklist/break-lock functionality.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Ilya Dryomov [Thu, 13 Apr 2017 10:17:39 +0000 (12:17 +0200)]
rbd: return ResponseMessage result from rbd_handle_request_lock()
Right now it's just 0, but "no automatic exclusive lock transfers" mode
code will need -EROFS.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Ilya Dryomov [Thu, 13 Apr 2017 10:17:39 +0000 (12:17 +0200)]
rbd: kill rbd_is_lock_supported()
Currently the exclusive lock is acquired only if the mapping is
writable, i.e. an image HEAD mapped in rw mode. This means that we
don't acquire the lock for executing a read from a snapshot or an image
HEAD mapped in ro mode, even if lock_on_read is set. This is somewhat
weird and inconsistent with "no automatic exclusive lock transfers"
mode, where the lock is acquired unconditionally.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Ilya Dryomov [Thu, 13 Apr 2017 10:17:38 +0000 (12:17 +0200)]
rbd: support updating the lock cookie without releasing the lock
As we no longer release the lock before potentially raising BLACKLISTED
in rbd_reregister_watch(), the "either locked or blacklisted" assert in
rbd_queue_workfn() needs to go: we can be both locked and blacklisted
at that point now.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Ilya Dryomov [Thu, 13 Apr 2017 10:17:38 +0000 (12:17 +0200)]
rbd: store lock cookie
In preparation for supporting set_cookie method (or rather set_cookie
fallback for older OSDs), store the lock cookie on lock and use it on
unlock instead of recalculating from rbd_dev->watch_cookie.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Ilya Dryomov [Thu, 13 Apr 2017 10:17:38 +0000 (12:17 +0200)]
rbd: ignore unlock errors
Currently the lock_state is set to UNLOCKED (preventing further I/O),
but RELEASED_LOCK notification isn't sent. Be consistent with userspace
and treat ceph_cls_unlock() errors as the image is unlocked.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Ilya Dryomov [Thu, 13 Apr 2017 10:17:38 +0000 (12:17 +0200)]
rbd: fix error handling around rbd_init_disk()
add_disk() takes an extra reference on disk->queue, which is put in
put_disk() -> disk_release(). Avoiding blk_cleanup_queue() (which also
puts the queue) until add_disk() sets GENHD_FL_UP works for the queue
itself, but leaks various queue internals. Conditioning tag_set freeing
on GENHD_FL_UP is wrong too: all error paths after rbd_init_disk() leak
the tag_set.
Move the final "announce" steps out of rbd_dev_device_setup() so that
it can be unwound like any other function. Leave "announce" steps to
do_rbd_add/remove().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Ilya Dryomov [Thu, 13 Apr 2017 10:17:37 +0000 (12:17 +0200)]
rbd: move rbd_unregister_watch() call into rbd_dev_image_release()
rbd_dev->disk tear down vs rbd_watch_cb() race shouldn't be a problem
anymore thanks to EXISTS and REMOVING checks in rbd_dev_update_size().
A similar race could occur on "rbd map", see commit
811c66887746
("rbd: fix rbd map vs notify races").
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Ilya Dryomov [Thu, 13 Apr 2017 10:17:37 +0000 (12:17 +0200)]
rbd: move rbd_dev_destroy() call out of rbd_dev_image_release()
... to simplify error handling in do_rbd_add().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Jeff Layton [Tue, 4 Apr 2017 12:39:46 +0000 (08:39 -0400)]
ceph: when seeing write errors on an inode, switch to sync writes
Currently, we don't have a real feedback mechanism in place for when we
start seeing buffered writeback errors. If writeback is failing, there
is nothing that prevents an application from continuing to dirty pages
that aren't being cleaned.
In the event that we're seeing write errors of any sort occur on an
inode, have the callback set a flag to force further writes to be
synchronous. When the next write succeeds, clear the flag to allow
buffered writeback to continue.
Since this is just a hint to the write submission mechanism, we only
take the i_ceph_lock when a lockless check shows that the flag needs to
be changed.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng” <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Jeff Layton [Tue, 4 Apr 2017 12:39:44 +0000 (08:39 -0400)]
Revert "ceph: SetPageError() for writeback pages if writepages fails"
This reverts commit
b109eec6f4332bd517e2f41e207037c4b9065094.
If I'm filling up a filesystem with this sort of command:
$ dd if=/dev/urandom of=/mnt/cephfs/fillfile bs=2M oflag=sync
...then I'll eventually get back EIO on a write. Further calls
will give us ENOSPC.
I'm not sure what prompted this change, but I don't think it's what we
want to do. If writepages failed, we will have already set the mapping
error appropriately, and that's what gets reported by fsync() or
close().
__filemap_fdatawait_range however, does this:
wait_on_page_writeback(page);
if (TestClearPageError(page))
ret = -EIO;
...and that -EIO ends up trumping the mapping's error if one exists.
When writepages fails, we only want to set the error in the mapping,
and not flag the individual pages.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng” <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Jeff Layton [Thu, 13 Apr 2017 15:07:04 +0000 (11:07 -0400)]
ceph: handle epoch barriers in cap messages
Have the client store and update the osdc epoch_barrier when a cap
message comes in with one.
When sending cap messages, send the epoch barrier as well. This allows
clients to inform servers that their released caps may not be used until
a particular OSD map epoch.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng” <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Jeff Layton [Tue, 18 Apr 2017 13:21:16 +0000 (09:21 -0400)]
libceph: add an epoch_barrier field to struct ceph_osd_client
Cephfs can get cap update requests that contain a new epoch barrier in
them. When that happens we want to pause all OSD traffic until the right
map epoch arrives.
Add an epoch_barrier field to ceph_osd_client that is protected by the
osdc->lock rwsem. When the barrier is set, and the current OSD map
epoch is below that, pause the request target when submitting the
request or when revisiting it. Add a way for upper layers (cephfs)
to update the epoch_barrier as well.
If we get a new map, compare the new epoch against the barrier before
kicking requests and request another map if the map epoch is still lower
than the one we want.
If we get a map with a full pool, or at quota condition, then set the
barrier to the current epoch value.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Jeff Layton [Tue, 4 Apr 2017 12:39:39 +0000 (08:39 -0400)]
libceph: abort already submitted but abortable requests when map or pool goes full
When a Ceph volume hits capacity, a flag is set in the OSD map to
indicate that, and a new map is sprayed around the cluster. With cephfs
we want it to shut down any abortable requests that are in progress with
an -ENOSPC error as they'd just hang otherwise.
Add a new ceph_osdc_abort_on_full helper function to handle this. It
will first check whether there is an out-of-space condition in the
cluster and then walk the tree and abort any request that has
r_abort_on_full set with a -ENOSPC error. Call this new function
directly whenever we get a new OSD map.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Jeff Layton [Tue, 4 Apr 2017 12:39:37 +0000 (08:39 -0400)]
libceph: allow requests to return immediately on full conditions if caller wishes
Usually, when the osd map is flagged as full or the pool is at quota,
write requests just hang. This is not what we want for cephfs, where
it would be better to simply report -ENOSPC back to userland instead
of stalling.
If the caller knows that it will want an immediate error return instead
of blocking on a full or at-quota error condition then allow it to set a
flag to request that behavior.
Set that flag in ceph_osdc_new_request (since ceph.ko is the only caller),
and on any other write request from ceph.ko.
A later patch will deal with requests that were submitted before the new
map showing the full condition came in.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Jeff Layton [Tue, 4 Apr 2017 12:39:36 +0000 (08:39 -0400)]
libceph: remove req->r_replay_version
Nothing uses this anymore with the removal of the ack vs. commit code.
Remove the field and just encode zeroes into place in the request
encoding.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Yan, Zheng [Wed, 5 Apr 2017 16:54:05 +0000 (12:54 -0400)]
ceph: make seeky readdir more efficient
Current cephfs client uses string to indicate start position of
readdir. The string is last entry of previous readdir reply.
This approach does not work for seeky readdir because we can
not easily convert the new postion to a string. For seeky readdir,
mds needs to return dentries from the beginning. Client keeps
retrying if the reply does not contain the dentry it wants.
In current version of ceph, mds sorts CDentry in its cache in
hash order. Client also uses dentry hash to compose dir postion.
For seeky readdir, if client passes the hash part of dir postion
to mds. mds can avoid replying useless dentries.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Yan, Zheng [Tue, 28 Mar 2017 09:56:29 +0000 (17:56 +0800)]
ceph: close stopped mds' session
If a mds has stopped, close its session and clean up its session
requests/caps. The process is similar to handling SESSION_CLOSE
initiated by mds.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Yan, Zheng [Wed, 29 Mar 2017 07:30:24 +0000 (15:30 +0800)]
ceph: fix potential use-after-free
__unregister_session() free the session if it drops the last
reference. We should grab an extra reference if we want to use
session after __unregister_session().
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Yan, Zheng [Tue, 28 Mar 2017 09:04:13 +0000 (17:04 +0800)]
ceph: allow connecting to mds whose rank >= mdsmap::m_max_mds
mdsmap::m_max_mds is the expected count of active mds. It's not the
max rank of active mds. User can decrease mdsmap::m_max_mds, but does
not stop mds whose rank >= mdsmap::m_max_mds.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Yan, Zheng [Sat, 25 Mar 2017 09:28:10 +0000 (17:28 +0800)]
ceph: fix wrong check in ceph_renew_caps()
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Elena Reshetova [Fri, 17 Mar 2017 12:10:29 +0000 (14:10 +0200)]
libceph: convert ceph_pagelist.refcnt from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Elena Reshetova [Fri, 17 Mar 2017 12:10:28 +0000 (14:10 +0200)]
libceph: convert ceph_osd.o_ref from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Elena Reshetova [Fri, 17 Mar 2017 12:10:27 +0000 (14:10 +0200)]
libceph: convert ceph_snap_context.nref from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Elena Reshetova [Fri, 3 Mar 2017 09:15:07 +0000 (11:15 +0200)]
ceph: convert ceph_cap_snap.nref from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Elena Reshetova [Fri, 3 Mar 2017 09:15:06 +0000 (11:15 +0200)]
ceph: convert ceph_mds_session.s_ref from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ilya Dryomov [Fri, 3 Mar 2017 17:16:07 +0000 (18:16 +0100)]
libceph: supported_features module parameter
Add a readonly, exported to sysfs module parameter so that userspace
can generate meaningful error messages. It's a bit funky, but there is
no other libceph-specific place.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ilya Dryomov [Fri, 3 Mar 2017 17:16:07 +0000 (18:16 +0100)]
libceph, ceph: always advertise all supported features
No reason to hide CephFS-specific features in the rbd case. Recent
feature bits mix RADOS and CephFS-specific stuff together anyway.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Linus Torvalds [Mon, 1 May 2017 02:47:48 +0000 (19:47 -0700)]
Linux 4.11
Linus Torvalds [Sun, 30 Apr 2017 18:44:18 +0000 (11:44 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"The final fixes for 4.11:
- prevent a triple fault with function graph tracing triggered via
suspend to ram
- prevent optimizing for size when function graph tracing is enabled
and the compiler does not support -mfentry
- prevent mwaitx() being called with a zero timeout as mwaitx() might
never return. Observed on the new Ryzen CPUs"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Prevent timer value 0 for MWAITX
x86/build: convert function graph '-Os' error to warning
ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram
Linus Torvalds [Sun, 30 Apr 2017 18:35:00 +0000 (11:35 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single fix for a cputime accounting regression which got introduced
in the 4.11 cycle"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cputime: Fix ksoftirqd cputime accounting regression
Janakarajan Natarajan [Tue, 25 Apr 2017 21:44:03 +0000 (16:44 -0500)]
Prevent timer value 0 for MWAITX
Newer hardware has uncovered a bug in the software implementation of
using MWAITX for the delay function. A value of 0 for the timer is meant
to indicate that a timeout will not be used to exit MWAITX. On newer
hardware this can result in MWAITX never returning, resulting in NMI
soft lockup messages being printed. On older hardware, some of the other
conditions under which MWAITX can exit masked this issue. The AMD APM
does not currently document this and will be updated.
Please refer to http://marc.info/?l=kvm&m=
148950623231140 for
information regarding NMI soft lockup messages on an AMD Ryzen 1800X.
This has been root-caused as a 0 passed to MWAITX causing it to wait
indefinitely.
This change has the added benefit of avoiding the unnecessary setup of
MONITORX/MWAITX when the delay value is zero.
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Link: http://lkml.kernel.org/r/1493156643-29366-1-git-send-email-Janakarajan.Natarajan@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Linus Torvalds [Sat, 29 Apr 2017 21:00:42 +0000 (14:00 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull iov iter fix from Al Viro.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix a braino in ITER_PIPE iov_iter_revert()
Al Viro [Sat, 29 Apr 2017 20:42:30 +0000 (16:42 -0400)]
fix a braino in ITER_PIPE iov_iter_revert()
Fixes:
27c0e3748e41
Tested-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sat, 29 Apr 2017 00:04:31 +0000 (17:04 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One odd config build fix for a recent Allwinner clock driver change
that got merged. The common code called code in another file that
wasn't always built. This just forces it on so people don't run into
this bad configuration"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: always select CCU_GATE
Linus Torvalds [Fri, 28 Apr 2017 21:13:16 +0000 (14:13 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"Just a couple more stragglers, I really hope this is it.
1) Don't let frags slip down into the GRO segmentation handlers, from
Steffen Klassert.
2) Truesize under-estimation triggers warnings in TCP over loopback
with socket filters, 2 part fix from Eric Dumazet.
3) Fix undesirable reset of bonding MTU to ETH_HLEN on slave removal,
from Paolo Abeni.
4) If we flush the XFRM policy after garbage collection, it doesn't
work because stray entries can be created afterwards. Fix from Xin
Long.
5) Hung socket connection fixes in TIPC from Parthasarathy Bhuvaragan.
6) Fix GRO regression with IPSEC when netfilter is disabled, from
Sabrina Dubroca.
7) Fix cpsw driver Kconfig dependency regression, from Arnd Bergmann"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net: hso: register netdev later to avoid a race condition
net: adjust skb->truesize in ___pskb_trim()
tcp: do not underestimate skb->truesize in tcp_trim_head()
bonding: avoid defaulting hard_header_len to ETH_HLEN on slave removal
ipv4: Don't pass IP fragments to upper layer GRO handlers.
cpsw/netcp: refine cpts dependency
tipc: close the connection if protocol messages contain errors
tipc: improve error validations for sockets in CONNECTING state
tipc: Fix missing connection request handling
xfrm: fix GRO for !CONFIG_NETFILTER
xfrm: do the garbage collection after flushing policy
Andreas Kemnade [Wed, 26 Apr 2017 17:26:40 +0000 (19:26 +0200)]
net: hso: register netdev later to avoid a race condition
If the netdev is accessed before the urbs are initialized,
there will be NULL pointer dereferences. That is avoided by
registering it when it is fully initialized.
This case occurs e.g. if dhcpcd is running in the background
and the device is probed, either after insmod hso or
when the device appears on the usb bus.
A backtrace is the following:
[ 1357.356048] usb 1-2: new high-speed USB device number 12 using ehci-omap
[ 1357.551177] usb 1-2: New USB device found, idVendor=0af0, idProduct=8800
[ 1357.558654] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 1357.568572] usb 1-2: Product: Globetrotter HSUPA Modem
[ 1357.574096] usb 1-2: Manufacturer: Option N.V.
[ 1357.685882] hso 1-2:1.5: Not our interface
[ 1460.886352] hso: unloaded
[ 1460.889984] usbcore: deregistering interface driver hso
[ 1513.769134] hso: ../drivers/net/usb/hso.c: Option Wireless
[ 1513.846771] Unable to handle kernel NULL pointer dereference at virtual address
00000030
[ 1513.887664] hso 1-2:1.5: Not our interface
[ 1513.906890] usbcore: registered new interface driver hso
[ 1513.937988] pgd =
ecdec000
[ 1513.949890] [
00000030] *pgd=
acd15831, *pte=
00000000, *ppte=
00000000
[ 1513.956573] Internal error: Oops: 817 [#1] PREEMPT SMP ARM
[ 1513.962371] Modules linked in: hso usb_f_ecm omap2430 bnep bluetooth g_ether usb_f_rndis u_ether libcomposite configfs ipv6 arc4 wl18xx wlcore mac80211 cfg80211 bq27xxx_battery panel_tpo_td028ttec1 omapdrm drm_kms_helper cfbfillrect snd_soc_simple_card syscopyarea cfbimgblt snd_soc_simple_card_utils sysfillrect sysimgblt fb_sys_fops snd_soc_omap_twl4030 cfbcopyarea encoder_opa362 drm twl4030_madc_hwmon wwan_on_off snd_soc_gtm601 pwm_omap_dmtimer generic_adc_battery connector_analog_tv pwm_bl extcon_gpio omap3_isp wlcore_sdio videobuf2_dma_contig videobuf2_memops w1_bq27000 videobuf2_v4l2 videobuf2_core omap_hdq snd_soc_omap_mcbsp ov9650 snd_soc_omap bmp280_i2c bmg160_i2c v4l2_common snd_pcm_dmaengine bmp280 bmg160_core at24 bmc150_magn_i2c nvmem_core videodev phy_twl4030_usb bmc150_accel_i2c tsc2007
[ 1514.037384] bmc150_magn bmc150_accel_core media leds_tca6507 bno055 industrialio_triggered_buffer kfifo_buf gpio_twl4030 musb_hdrc snd_soc_twl4030 twl4030_vibra twl4030_madc twl4030_pwrbutton twl4030_charger industrialio w2sg0004 ehci_omap omapdss [last unloaded: hso]
[ 1514.062622] CPU: 0 PID: 3433 Comm: dhcpcd Tainted: G W 4.11.0-rc8-letux+ #1
[ 1514.071136] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[ 1514.077758] task:
ee748240 task.stack:
ecdd6000
[ 1514.082580] PC is at hso_start_net_device+0x50/0xc0 [hso]
[ 1514.088287] LR is at hso_net_open+0x68/0x84 [hso]
[ 1514.093231] pc : [<
bf79c304>] lr : [<
bf79ced8>] psr:
a00f0013
sp :
ecdd7e20 ip :
00000000 fp :
ffffffff
[ 1514.105316] r10:
00000000 r9 :
ed0e080c r8 :
ecd8fe2c
[ 1514.110839] r7 :
bf79cef4 r6 :
ecd8fe00 r5 :
00000000 r4 :
ed0dbd80
[ 1514.117706] r3 :
00000000 r2 :
c0020c80 r1 :
00000000 r0 :
ecdb7800
[ 1514.124572] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 1514.132110] Control:
10c5387d Table:
acdec019 DAC:
00000051
[ 1514.138153] Process dhcpcd (pid: 3433, stack limit = 0xecdd6218)
[ 1514.144470] Stack: (0xecdd7e20 to 0xecdd8000)
[ 1514.149078] 7e20:
ed0dbd80 ecd8fe98 00000001 00000000 ecd8f800 ecd8fe00 ecd8fe60 00000000
[ 1514.157714] 7e40:
ed0e080c bf79ced8 bf79ce70 ecd8f800 00000001 bf7a0258 ecd8f830 c068d958
[ 1514.166320] 7e60:
c068d8b8 ecd8f800 00000001 00001091 00001090 c068dba4 ecd8f800 00001090
[ 1514.174926] 7e80:
ecd8f940 ecd8f800 00000000 c068dc60 00000000 00000001 ed0e0800 ecd8f800
[ 1514.183563] 7ea0:
00000000 c06feaa8 c0ca39c2 beea57dc 00000020 00000000 306f7368 00000000
[ 1514.192169] 7ec0:
00000000 00000000 00001091 00000000 00000000 00000000 00000000 00008914
[ 1514.200805] 7ee0:
eaa9ab60 beea57dc c0c9bfc0 eaa9ab40 00000006 00000000 00046858 c066a948
[ 1514.209411] 7f00:
beea57dc eaa9ab60 ecc6b0c0 c02837b0 00000006 c0282c90 0000c000 c0283654
[ 1514.218017] 7f20:
c09b0c00 c098bc31 00000001 c0c5e513 c0c5e513 00000000 c0151354 c01a20c0
[ 1514.226654] 7f40:
c0c5e513 c01a3134 ecdd6000 c01a3160 ee7487f0 600f0013 00000000 ee748240
[ 1514.235260] 7f60:
ee748734 00000000 ecc6b0c0 ecc6b0c0 beea57dc 00008914 00000006 00000000
[ 1514.243896] 7f80:
00046858 c02837b0 00001091 0003a1f0 00046608 0003a248 00000036 c01071e4
[ 1514.252502] 7fa0:
ecdd6000 c0107040 0003a1f0 00046608 00000006 00008914 beea57dc 00001091
[ 1514.261108] 7fc0:
0003a1f0 00046608 0003a248 00000036 0003ac0c 00046608 00046610 00046858
[ 1514.269744] 7fe0:
0003a0ac beea57d4 000167eb b6f23106 400f0030 00000006 00000000 00000000
[ 1514.278411] [<
bf79c304>] (hso_start_net_device [hso]) from [<
bf79ced8>] (hso_net_open+0x68/0x84 [hso])
[ 1514.288238] [<
bf79ced8>] (hso_net_open [hso]) from [<
c068d958>] (__dev_open+0xa0/0xf4)
[ 1514.296600] [<
c068d958>] (__dev_open) from [<
c068dba4>] (__dev_change_flags+0x8c/0x130)
[ 1514.305023] [<
c068dba4>] (__dev_change_flags) from [<
c068dc60>] (dev_change_flags+0x18/0x48)
[ 1514.313934] [<
c068dc60>] (dev_change_flags) from [<
c06feaa8>] (devinet_ioctl+0x348/0x714)
[ 1514.322540] [<
c06feaa8>] (devinet_ioctl) from [<
c066a948>] (sock_ioctl+0x2b0/0x308)
[ 1514.330627] [<
c066a948>] (sock_ioctl) from [<
c0282c90>] (vfs_ioctl+0x20/0x34)
[ 1514.338165] [<
c0282c90>] (vfs_ioctl) from [<
c0283654>] (do_vfs_ioctl+0x82c/0x93c)
[ 1514.346038] [<
c0283654>] (do_vfs_ioctl) from [<
c02837b0>] (SyS_ioctl+0x4c/0x74)
[ 1514.353759] [<
c02837b0>] (SyS_ioctl) from [<
c0107040>] (ret_fast_syscall+0x0/0x1c)
[ 1514.361755] Code:
e3822103 e3822080 e1822781 e5981014 (
e5832030)
[ 1514.510833] ---[ end trace
dfb3e53c657f34a0 ]---
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 26 Apr 2017 16:07:46 +0000 (09:07 -0700)]
net: adjust skb->truesize in ___pskb_trim()
Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in
skb_try_coalesce() using syzkaller and a filter attached to a TCP
socket.
As we did recently in commit
158f323b9868 ("net: adjust skb->truesize in
pskb_expand_head()") we can adjust skb->truesize from ___pskb_trim(),
via a call to skb_condense().
If all frags were freed, then skb->truesize can be recomputed.
This call can be done if skb is not yet owned, or destructor is
sock_edemux().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 27 Apr 2017 00:15:40 +0000 (17:15 -0700)]
tcp: do not underestimate skb->truesize in tcp_trim_head()
Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in
skb_try_coalesce() using syzkaller and a filter attached to a TCP
socket over loopback interface.
I believe one issue with looped skbs is that tcp_trim_head() can end up
producing skb with under estimated truesize.
It hardly matters for normal conditions, since packets sent over
loopback are never truncated.
Bytes trimmed from skb->head should not change skb truesize, since
skb->head is not reallocated.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Thu, 27 Apr 2017 17:29:34 +0000 (19:29 +0200)]
bonding: avoid defaulting hard_header_len to ETH_HLEN on slave removal
On slave list updates, the bonding driver computes its hard_header_len
as the maximum of all enslaved devices's hard_header_len.
If the slave list is empty, e.g. on last enslaved device removal,
ETH_HLEN is used.
Since the bonding header_ops are set only when the first enslaved
device is attached, the above can lead to header_ops->create()
being called with the wrong skb headroom in place.
If bond0 is configured on top of ipoib devices, with the
following commands:
ifup bond0
for slave in $BOND_SLAVES_LIST; do
ip link set dev $slave nomaster
done
ping -c 1 <ip on bond0 subnet>
we will obtain a skb_under_panic() with a similar call trace:
skb_push+0x3d/0x40
push_pseudo_header+0x17/0x30 [ib_ipoib]
ipoib_hard_header+0x4e/0x80 [ib_ipoib]
arp_create+0x12f/0x220
arp_send_dst.part.19+0x28/0x50
arp_solicit+0x115/0x290
neigh_probe+0x4d/0x70
__neigh_event_send+0xa7/0x230
neigh_resolve_output+0x12e/0x1c0
ip_finish_output2+0x14b/0x390
ip_finish_output+0x136/0x1e0
ip_output+0x76/0xe0
ip_local_out+0x35/0x40
ip_send_skb+0x19/0x40
ip_push_pending_frames+0x33/0x40
raw_sendmsg+0x7d3/0xb50
inet_sendmsg+0x31/0xb0
sock_sendmsg+0x38/0x50
SYSC_sendto+0x102/0x190
SyS_sendto+0xe/0x10
do_syscall_64+0x67/0x180
entry_SYSCALL64_slow_path+0x25/0x25
This change addresses the issue avoiding updating the bonding device
hard_header_len when the slaves list become empty, forbidding to
shrink it below the value used by header_ops->create().
The bug is there since commit
54ef31371407 ("[PATCH] bonding: Handle large
hard_header_len") but the panic can be triggered only since
commit
fc791b633515 ("IB/ipoib: move back IB LL address into the hard
header").
Reported-by: Norbert P <noe@physik.uzh.ch>
Fixes:
54ef31371407 ("[PATCH] bonding: Handle large hard_header_len")
Fixes:
fc791b633515 ("IB/ipoib: move back IB LL address into the hard header")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Fri, 28 Apr 2017 08:54:32 +0000 (10:54 +0200)]
ipv4: Don't pass IP fragments to upper layer GRO handlers.
Upper layer GRO handlers can not handle IP fragments, so
exit GRO processing in this case.
This fixes ESP GRO because the packet must be reassembled
before we can decapsulate, otherwise we get authentication
failures.
It also aligns IPv4 to IPv6 where packets with fragmentation
headers are not passed to upper layer GRO handlers.
Fixes:
7785bba299a8 ("esp: Add a software GRO codepath")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Fri, 28 Apr 2017 15:03:58 +0000 (17:03 +0200)]
cpsw/netcp: refine cpts dependency
Tony Lindgren reports a kernel oops that resulted from my compile-time
fix on the default config. This shows two problems:
a) configurations that did not already enable PTP_1588_CLOCK will
now miss the cpts driver
b) when cpts support is disabled, the driver crashes. This is a
preexisting problem that we did not notice before my patch.
While the second problem is still being investigated, this modifies
the dependencies again, getting us back to the original state, with
another 'select NET_PTP_CLASSIFY' added in to avoid the original
link error we got, and the 'depends on POSIX_TIMERS' to hide
the CPTS support when turning it on would be useless.
Cc: stable@vger.kernel.org # 4.11 needs this
Fixes:
07fef3623407 ("cpsw/netcp: cpts depends on posix_timers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 28 Apr 2017 19:42:11 +0000 (15:42 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2017-04-28
1) Do garbage collecting after a policy flush to remove old
bundles immediately. From Xin Long.
2) Fix GRO if netfilter is not defined.
From Sabrina Dubroca.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 28 Apr 2017 18:08:42 +0000 (11:08 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
"Yet another quirk to i8042 to get touchpad recognized on some laptops"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add Clevo P650RS to the i8042 reset list
Arnd Bergmann [Thu, 27 Apr 2017 11:02:31 +0000 (13:02 +0200)]
clk: sunxi-ng: always select CCU_GATE
When the base driver is enabled but all SoC specific drivers are turned
off, we now get a build error after code was added to always refer to the
clk gates:
drivers/clk/built-in.o: In function `ccu_pll_notifier_cb':
:(.text+0x154f8): undefined reference to `ccu_gate_helper_disable'
:(.text+0x15504): undefined reference to `ccu_gate_helper_enable'
This changes the Kconfig to always require the gate code to be built-in
when CONFIG_SUNXI_CCU is set.
Fixes:
02ae2bc6febd ("clk: sunxi-ng: Add clk notifier to gate then ungate PLL clocks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Linus Torvalds [Fri, 28 Apr 2017 17:13:17 +0000 (10:13 -0700)]
Merge branch 'for-linus-4.11' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fix from Chris Mason:
"We have one more fix for btrfs.
This gets rid of a new WARN_ON from rc1 that ended up making more
noise than we really want. The larger fix for the underflow got
delayed a bit and it's better for now to put it under
CONFIG_BTRFS_DEBUG"
* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: qgroup: move noisy underflow warning to debugging build
David S. Miller [Fri, 28 Apr 2017 16:20:43 +0000 (12:20 -0400)]
Merge branch 'tipc-socket-connection-hangs'
Parthasarathy Bhuvaragan says:
====================
tipc: fix hanging socket connections
This patch series contains fixes for the socket layer to
prevent hanging / stale connections.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthasarathy Bhuvaragan [Wed, 26 Apr 2017 08:05:02 +0000 (10:05 +0200)]
tipc: close the connection if protocol messages contain errors
When a socket is shutting down, we notify the peer node about the
connection termination by reusing an incoming message if possible.
If the last received message was a connection acknowledgment
message, we reverse this message and set the error code to
TIPC_ERR_NO_PORT and send it to peer.
In tipc_sk_proto_rcv(), we never check for message errors while
processing the connection acknowledgment or probe messages. Thus
this message performs the usual flow control accounting and leaves
the session hanging.
In this commit, we terminate the connection when we receive such
error messages.
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthasarathy Bhuvaragan [Wed, 26 Apr 2017 08:05:01 +0000 (10:05 +0200)]
tipc: improve error validations for sockets in CONNECTING state
Until now, the checks for sockets in CONNECTING state was based on
the assumption that the incoming message was always from the
peer's accepted data socket.
However an application using a non-blocking socket sends an implicit
connect, this socket which is in CONNECTING state can receive error
messages from the peer's listening socket. As we discard these
messages, the application socket hangs as there due to inactivity.
In addition to this, there are other places where we process errors
but do not notify the user.
In this commit, we process such incoming error messages and notify
our users about them using sk_state_change().
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthasarathy Bhuvaragan [Wed, 26 Apr 2017 08:05:00 +0000 (10:05 +0200)]
tipc: Fix missing connection request handling
In filter_connect, we use waitqueue_active() to check for any
connections to wakeup. But waitqueue_active() is missing memory
barriers while accessing the critical sections, leading to
inconsistent results.
In this commit, we replace this with an SMP safe wq_has_sleeper()
using the generic socket callback sk_data_ready().
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 27 Apr 2017 20:39:19 +0000 (13:39 -0700)]
Merge tag 'nfsd-4.11-3' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Thanks to Ari Kauppi and Tuomas Haanpää at Synopsis for spotting bugs
in our NFSv2/v3 xdr code that could crash the server or leak memory"
* tag 'nfsd-4.11-3' of git://linux-nfs.org/~bfields/linux:
nfsd: stricter decoding of write-like NFSv2/v3 ops
nfsd4: minor NFSv2/v3 write decoding cleanup
nfsd: check for oversized NFSv2/v3 arguments
Linus Torvalds [Thu, 27 Apr 2017 18:38:05 +0000 (11:38 -0700)]
Merge tag 'ceph-for-4.11-rc9' of git://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for a kernel stack overflow bug in ceph setattr code, marked for
stable"
* tag 'ceph-for-4.11-rc9' of git://github.com/ceph/ceph-client:
ceph: fix recursion between ceph_set_acl() and __ceph_setattr()
Linus Torvalds [Thu, 27 Apr 2017 18:09:37 +0000 (11:09 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
- fix orangefs handling of faults on write() - I'd missed that one back
when orangefs was going through review.
- readdir counterpart of "9p: cope with bogus responses from server in
p9_client_{read,write}" - server might be lying or broken, and we'd
better not overrun the kmalloc'ed buffer we are copying the results
into.
- NFS O_DIRECT read/write can leave iov_iter advanced by too much;
that's what had been causing iov_iter_pipe() warnings davej had been
seeing.
- statx_timestamp.tv_nsec type fix (s32 -> u32). That one really should
go in before 4.11.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
uapi: change the type of struct statx_timestamp.tv_nsec to unsigned
fix nfs O_DIRECT advancing iov_iter too much
p9_client_readdir() fix
orangefs_bufmap_copy_from_iovec(): fix EFAULT handling
Michael Kerrisk (man-pages) [Thu, 27 Apr 2017 11:54:11 +0000 (13:54 +0200)]
statx: correct error handling of NULL pathname
The change in commit
1e2f82d1e9d1 ("statx: Kill fd-with-NULL-path
support in favour of AT_EMPTY_PATH") to error on a NULL pathname to
statx() is inconsistent.
It results in the error EINVAL for a NULL pathname. Other system calls
with similar APIs (fchownat(), fstatat(), linkat()), return EFAULT.
The solution is simply to remove the EINVAL check. As I already pointed
out in [1], user_path_at*() and filename_lookup() will handle the NULL
pathname as per the other APIs, to correctly produce the error EFAULT.
[1] https://lkml.org/lkml/2017/4/26/561
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sabrina Dubroca [Thu, 27 Apr 2017 10:03:37 +0000 (12:03 +0200)]
xfrm: fix GRO for !CONFIG_NETFILTER
In xfrm_input() when called from GRO, async == 0, and we end up
skipping the processing in xfrm4_transport_finish(). GRO path will
always skip the NF_HOOK, so we don't need the special-case for
!NETFILTER during GRO processing.
Fixes:
7785bba299a8 ("esp: Add a software GRO codepath")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Frederic Weisbecker [Tue, 25 Apr 2017 14:10:48 +0000 (16:10 +0200)]
sched/cputime: Fix ksoftirqd cputime accounting regression
irq_time_read() returns the irqtime minus the ksoftirqd time. This
is necessary because irq_time_read() is used to substract the IRQ time
from the sum_exec_runtime of a task. If we were to include the softirq
time of ksoftirqd, this task would substract its own CPU time everytime
it updates ksoftirqd->sum_exec_runtime which would therefore never
progress.
But this behaviour got broken by:
a499a5a14db ("sched/cputime: Increment kcpustat directly on irqtime account")
... which now includes ksoftirqd softirq time in the time returned by
irq_time_read().
This has resulted in wrong ksoftirqd cputime reported to userspace
through /proc/stat and thus "top" not showing ksoftirqd when it should
after intense networking load.
ksoftirqd->stime happens to be correct but it gets scaled down by
sum_exec_runtime through task_cputime_adjusted().
To fix this, just account the strict IRQ time in a separate counter and
use it to report the IRQ time.
Reported-and-tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1493129448-5356-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dmitry V. Levin [Wed, 26 Apr 2017 13:50:00 +0000 (14:50 +0100)]
uapi: change the type of struct statx_timestamp.tv_nsec to unsigned
The comment asserting that the value of struct statx_timestamp.tv_nsec
must be negative when statx_timestamp.tv_sec is negative, is wrong, as
could be seen from the following example:
#define _FILE_OFFSET_BITS 64
#include <assert.h>
#include <fcntl.h>
#include <stdio.h>
#include <sys/stat.h>
#include <unistd.h>
#include <asm/unistd.h>
#include <linux/stat.h>
int main(void)
{
static const struct timespec ts[2] = {
{ .tv_nsec = UTIME_OMIT },
{ .tv_sec = -2, .tv_nsec = 42 }
};
assert(utimensat(AT_FDCWD, ".", ts, 0) == 0);
struct stat st;
assert(stat(".", &st) == 0);
printf("st_mtim.tv_sec = %lld, st_mtim.tv_nsec = %lu\n",
(long long) st.st_mtim.tv_sec,
(unsigned long) st.st_mtim.tv_nsec);
struct statx stx;
assert(syscall(__NR_statx, AT_FDCWD, ".", 0, 0, &stx) == 0);
printf("stx_mtime.tv_sec = %lld, stx_mtime.tv_nsec = %lu\n",
(long long) stx.stx_mtime.tv_sec,
(unsigned long) stx.stx_mtime.tv_nsec);
return 0;
}
It expectedly prints:
st_mtim.tv_sec = -2, st_mtim.tv_nsec = 42
stx_mtime.tv_sec = -2, stx_mtime.tv_nsec = 42
The more generic comment asserting that the value of struct
statx_timestamp.tv_nsec might be negative is confusing to say the least.
It contradicts both the struct stat.st_[acm]time_nsec tradition and
struct timespec.tv_nsec requirements in utimensat syscall.
If statx syscall ever returns a stx_[acm]time containing a negative
tv_nsec that cannot be passed unmodified to utimensat syscall,
it will cause an immense confusion.
Fix this source of confusion by changing the type of struct
statx_timestamp.tv_nsec from __s32 to __u32.
Fixes:
a528d35e8bfc ("statx: Add a system call to make enhanced file info available")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-api@vger.kernel.org
cc: mtk.manpages@gmail.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Wed, 26 Apr 2017 22:10:45 +0000 (15:10 -0700)]
Merge git://git./linux/kernel/git/davem/sparc
Pull sparc fixes from David Miller:
"I didn't want the release to go out without the statx system call
properly hooked up"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: Update syscall tables.
sparc64: Fill in rest of HAVE_REGS_AND_STACK_ACCESS_API
David Howells [Wed, 26 Apr 2017 21:15:55 +0000 (22:15 +0100)]
statx: Kill fd-with-NULL-path support in favour of AT_EMPTY_PATH
With the new statx() syscall, the following both allow the attributes of
the file attached to a file descriptor to be retrieved:
statx(dfd, NULL, 0, ...);
and:
statx(dfd, "", AT_EMPTY_PATH, ...);
Change the code to reject the first option, though this means copying
the path and engaging pathwalk for the fstat() equivalent. dfd can be a
non-directory provided path is "".
[ The timing of this isn't wonderful, but applying this now before we
have statx() in any released kernel, before anybody starts using the
NULL special case. - Linus ]
Fixes:
a528d35e8bfc ("statx: Add a system call to make enhanced file info available")
Reported-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Eric Sandeen <sandeen@sandeen.net>
cc: fstests@vger.kernel.org
cc: linux-api@vger.kernel.org
cc: linux-man@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 26 Apr 2017 20:42:32 +0000 (13:42 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) MLX5 bug fixes from Saeed Mahameed et al:
- released wrong resources when firmware timeout happens
- fix wrong check for encapsulation size limits
- UAR memory leak
- ETHTOOL_GRXCLSRLALL failed to fill in info->data
2) Don't cache l3mdev on mis-matches local route, causes net devices to
leak refs. From Robert Shearman.
3) Handle fragmented SKBs properly in macsec driver, the problem is
that we were mis-sizing the sgvec table. From Jason A. Donenfeld.
4) We cannot have checksum offload enabled for inner UDP tunneled
packet during IPSEC, from Ansis Atteka.
5) Fix double SKB free in ravb driver, from Dan Carpenter.
6) Fix CPU port handling in b53 DSA driver, from Florian Dainelli.
7) Don't use on-stack buffers for usb_control_msg() in CAN usb driver,
from Maksim Salau.
8) Fix device leak in macvlan driver, from Herbert Xu. We have to purge
the broadcast queue properly on port destroy.
9) Fix tx ring entry limit on EF10 devices in sfc driver. From Bert
Kenward.
10) Fix memory leaks in team driver, from Pan Bian.
11) Don't setup ipv6_stub before it can be actually used, from Paolo
Abeni.
12) Fix tipc socket flow control accounting, from Parthasarathy
Bhuvaragan.
13) Fix crash on module unload in hso driver, from Andreas Kemnade.
14) Fix purging of bridge multicast entries, the problem is that if we
don't defer it to ndo_uninit it's possible for new entries to get
added after we purge. Fix from Xin Long.
15) Don't return garbage for PACKET_HDRLEN getsockopt, from Alexander
Potapenko.
16) Fix autoneg stall properly in PHY layer, and revert micrel driver
change that was papering over it. From Alexander Kochetkov.
17) Don't dereference an ipv4 route as an ipv6 one in the ip6_tunnnel
code, from Cong Wang.
18) Clear out the congestion control private of the TCP socket in all of
the right places, from Wei Wang.
19) rawv6_ioctl measures SKB length incorrectly, fix from Jamie
Bainbridge.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
ipv6: check raw payload size correctly in ioctl
tcp: memset ca_priv data to 0 properly
ipv6: check skb->protocol before lookup for nexthop
net: core: Prevent from dereferencing null pointer when releasing SKB
macsec: dynamically allocate space for sglist
Revert "phy: micrel: Disable auto negotiation on startup"
net: phy: fix auto-negotiation stall due to unavailable interrupt
net/packet: check length in getsockopt() called with PACKET_HDRLEN
net: ipv6: regenerate host route if moved to gc list
bridge: move bridge multicast cleanup to ndo_uninit
ipv6: fix source routing
qed: Fix error in the dcbx app meta data initialization.
netvsc: fix calculation of available send sections
net: hso: fix module unloading
tipc: fix socket flow control accounting error at tipc_recv_stream
tipc: fix socket flow control accounting error at tipc_send_stream
ipv6: move stub initialization after ipv6 setup completion
team: fix memory leaks
sfc: tx ring can only have 2048 entries for all EF10 NICs
macvlan: Fix device ref leak when purging bc_queue
...
Jamie Bainbridge [Wed, 26 Apr 2017 00:43:27 +0000 (10:43 +1000)]
ipv6: check raw payload size correctly in ioctl
In situations where an skb is paged, the transport header pointer and
tail pointer can be the same because the skb contents are in frags.
This results in ioctl(SIOCINQ/FIONREAD) incorrectly returning a
length of 0 when the length to receive is actually greater than zero.
skb->len is already correctly set in ip6_input_finish() with
pskb_pull(), so use skb->len as it always returns the correct result
for both linear and paged data.
Signed-off-by: Jamie Bainbridge <jbainbri@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Wed, 26 Apr 2017 00:38:02 +0000 (17:38 -0700)]
tcp: memset ca_priv data to 0 properly
Always zero out ca_priv data in tcp_assign_congestion_control() so that
ca_priv data is cleared out during socket creation.
Also always zero out ca_priv data in tcp_reinit_congestion_control() so
that when cc algorithm is changed, ca_priv data is cleared out as well.
We should still zero out ca_priv data even in TCP_CLOSE state because
user could call connect() on AF_UNSPEC to disconnect the socket and
leave it in TCP_CLOSE state and later call setsockopt() to switch cc
algorithm on this socket.
Fixes:
2b0a8c9ee ("tcp: add CDG congestion control")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Tue, 25 Apr 2017 21:37:15 +0000 (14:37 -0700)]
ipv6: check skb->protocol before lookup for nexthop
Andrey reported a out-of-bound access in ip6_tnl_xmit(), this
is because we use an ipv4 dst in ip6_tnl_xmit() and cast an IPv4
neigh key as an IPv6 address:
neigh = dst_neigh_lookup(skb_dst(skb),
&ipv6_hdr(skb)->daddr);
if (!neigh)
goto tx_err_link_failure;
addr6 = (struct in6_addr *)&neigh->primary_key; // <=== HERE
addr_type = ipv6_addr_type(addr6);
if (addr_type == IPV6_ADDR_ANY)
addr6 = &ipv6_hdr(skb)->daddr;
memcpy(&fl6->daddr, addr6, sizeof(fl6->daddr));
Also the network header of the skb at this point should be still IPv4
for 4in6 tunnels, we shold not just use it as IPv6 header.
This patch fixes it by checking if skb->protocol is ETH_P_IPV6: if it
is, we are safe to do the nexthop lookup using skb_dst() and
ipv6_hdr(skb)->daddr; if not (aka IPv4), we have no clue about which
dest address we can pick here, we have to rely on callers to fill it
from tunnel config, so just fall to ip6_route_output() to make the
decision.
Fixes:
ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel endpoints.")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Myungho Jung [Tue, 25 Apr 2017 18:58:15 +0000 (11:58 -0700)]
net: core: Prevent from dereferencing null pointer when releasing SKB
Added NULL check to make __dev_kfree_skb_irq consistent with kfree
family of functions.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=195289
Signed-off-by: Myungho Jung <mhjungk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Tue, 25 Apr 2017 17:08:18 +0000 (19:08 +0200)]
macsec: dynamically allocate space for sglist
We call skb_cow_data, which is good anyway to ensure we can actually
modify the skb as such (another error from prior). Now that we have the
number of fragments required, we can safely allocate exactly that amount
of memory.
Fixes:
c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 26 Apr 2017 18:33:14 +0000 (14:33 -0400)]
Revert "phy: micrel: Disable auto negotiation on startup"
This reverts commit
99f81afc139c6edd14d77a91ee91685a414a1c66.
It was papering over the real problem, which is fixed by commit
f555f34fdc58 ("net: phy: fix auto-negotiation stall due to unavailable
interrupt")
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Kochetkov [Thu, 20 Apr 2017 11:00:04 +0000 (14:00 +0300)]
net: phy: fix auto-negotiation stall due to unavailable interrupt
The Ethernet link on an interrupt driven PHY was not coming up if the Ethernet
cable was plugged before the Ethernet interface was brought up.
The patch trigger PHY state machine to update link state if PHY was requested to
do auto-negotiation and auto-negotiation complete flag already set.
During power-up cycle the PHY do auto-negotiation, generate interrupt and set
auto-negotiation complete flag. Interrupt is handled by PHY state machine but
doesn't update link state because PHY is in PHY_READY state. After some time
MAC bring up, start and request PHY to do auto-negotiation. If there are no new
settings to advertise genphy_config_aneg() doesn't start PHY auto-negotiation.
PHY continue to stay in auto-negotiation complete state and doesn't fire
interrupt. At the same time PHY state machine expect that PHY started
auto-negotiation and is waiting for interrupt from PHY and it won't get it.
Fixes:
321beec5047a ("net: phy: Use interrupts when available in NOLINK state")
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Cc: stable <stable@vger.kernel.org> # v4.9+
Tested-by: Roger Quadros <rogerq@ti.com>
Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 26 Apr 2017 16:30:33 +0000 (09:30 -0700)]
Merge tag 'sound-4.11' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Since we got a bonus week, let me try to screw a few pending fixes.
A slightly large fix is the locking fix in ASoC STI driver, but it's
pretty board-specific, and the risk is fairly low.
All the rest are small / trivial fixes, mostly marked as stable, for
ALSA sequencer core, ASoC topology, ASoC Intel bytcr and Firewire
drivers"
* tag 'sound-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: intel: Fix PM and non-atomic crash in bytcr drivers
ALSA: firewire-lib: fix inappropriate assignment between signed/unsigned type
ALSA: seq: Don't break snd_use_lock_sync() loop by timeout
ASoC: topology: Fix to store enum text values
ASoC: STI: Fix null ptr deference in IRQ handler
ALSA: oxfw: fix regression to handle Stanton SCS.1m/1d
Xin Long [Mon, 24 Apr 2017 07:33:39 +0000 (15:33 +0800)]
xfrm: do the garbage collection after flushing policy
Now xfrm garbage collection can be triggered by 'ip xfrm policy del'.
These is no reason not to do it after flushing policies, especially
considering that 'garbage collection deferred' is only triggered
when it reaches gc_thresh.
It's no good that the policy is gone but the xdst still hold there.
The worse thing is that xdst->route/orig_dst is also hold and can
not be released even if the orig_dst is already expired.
This patch is to do the garbage collection if there is any policy
removed in xfrm_policy_flush.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Linus Torvalds [Tue, 25 Apr 2017 21:07:24 +0000 (14:07 -0700)]
Merge tag 'arc-4.11-final' of git://git./linux/kernel/git/vgupta/arc
Pull ARC fix from Vineet Gupta:
"Last minute fixes for ARC:
- build error in Mellanox nps platform
- addressing lack of saving FPU regs in releavnt configs"
* tag 'arc-4.11-final' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARCv2: entry: save Accumulator register pair (r58:59) if present
ARC: [plat-eznps] Fix build error
J. Bruce Fields [Fri, 21 Apr 2017 19:26:30 +0000 (15:26 -0400)]
nfsd: stricter decoding of write-like NFSv2/v3 ops
The NFSv2/v3 code does not systematically check whether we decode past
the end of the buffer. This generally appears to be harmless, but there
are a few places where we do arithmetic on the pointers involved and
don't account for the possibility that a length could be negative. Add
checks to catch these.
Reported-by: Tuomas Haanpää <thaan@synopsys.com>
Reported-by: Ari Kauppi <ari@synopsys.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
J. Bruce Fields [Tue, 25 Apr 2017 20:21:34 +0000 (16:21 -0400)]
nfsd4: minor NFSv2/v3 write decoding cleanup
Use a couple shortcuts that will simplify a following bugfix.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
J. Bruce Fields [Fri, 21 Apr 2017 20:10:18 +0000 (16:10 -0400)]
nfsd: check for oversized NFSv2/v3 arguments
A client can append random data to the end of an NFSv2 or NFSv3 RPC call
without our complaining; we'll just stop parsing at the end of the
expected data and ignore the rest.
Encoded arguments and replies are stored together in an array of pages,
and if a call is too large it could leave inadequate space for the
reply. This is normally OK because NFS RPC's typically have either
short arguments and long replies (like READ) or long arguments and short
replies (like WRITE). But a client that sends an incorrectly long reply
can violate those assumptions. This was observed to cause crashes.
Also, several operations increment rq_next_page in the decode routine
before checking the argument size, which can leave rq_next_page pointing
well past the end of the page array, causing trouble later in
svc_free_pages.
So, following a suggestion from Neil Brown, add a central check to
enforce our expectation that no NFSv2/v3 call has both a large call and
a large reply.
As followup we may also want to rewrite the encoding routines to check
more carefully that they aren't running off the end of the page array.
We may also consider rejecting calls that have any extra garbage
appended. That would be safer, and within our rights by spec, but given
the age of our server and the NFS protocol, and the fact that we've
never enforced this before, we may need to balance that against the
possibility of breaking some oddball client.
Reported-by: Tuomas Haanpää <thaan@synopsys.com>
Reported-by: Ari Kauppi <ari@synopsys.com>
Cc: stable@vger.kernel.org
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Yan, Zheng [Wed, 19 Apr 2017 02:01:48 +0000 (10:01 +0800)]
ceph: fix recursion between ceph_set_acl() and __ceph_setattr()
ceph_set_acl() calls __ceph_setattr() if the setacl operation needs
to modify inode's i_mode. __ceph_setattr() updates inode's i_mode,
then calls posix_acl_chmod().
The problem is that __ceph_setattr() calls posix_acl_chmod() before
sending the setattr request. The get_acl() call in posix_acl_chmod()
can trigger a getxattr request. The reply of the getxattr request
can restore inode's i_mode to its old value. The set_acl() call in
posix_acl_chmod() sees old value of inode's i_mode, so it calls
__ceph_setattr() again.
Cc: stable@vger.kernel.org # needs backporting for < 4.9
Link: http://tracker.ceph.com/issues/19688
Reported-by: Jerry Lee <leisurelysw24@gmail.com>
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Tested-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Alexander Potapenko [Tue, 25 Apr 2017 16:51:46 +0000 (18:51 +0200)]
net/packet: check length in getsockopt() called with PACKET_HDRLEN
In the case getsockopt() is called with PACKET_HDRLEN and optlen < 4
|val| remains uninitialized and the syscall may behave differently
depending on its value, and even copy garbage to userspace on certain
architectures. To fix this we now return -EINVAL if optlen is too small.
This bug has been detected with KMSAN.
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 25 Apr 2017 16:17:29 +0000 (09:17 -0700)]
net: ipv6: regenerate host route if moved to gc list
Taking down the loopback device wreaks havoc on IPv6 routing. By
extension, taking down a VRF device wreaks havoc on its table.
Dmitry and Andrey both reported heap out-of-bounds reports in the IPv6
FIB code while running syzkaller fuzzer. The root cause is a dead dst
that is on the garbage list gets reinserted into the IPv6 FIB. While on
the gc (or perhaps when it gets added to the gc list) the dst->next is
set to an IPv4 dst. A subsequent walk of the ipv6 tables causes the
out-of-bounds access.
Andrey's reproducer was the key to getting to the bottom of this.
With IPv6, host routes for an address have the dst->dev set to the
loopback device. When the 'lo' device is taken down, rt6_ifdown initiates
a walk of the fib evicting routes with the 'lo' device which means all
host routes are removed. That process moves the dst which is attached to
an inet6_ifaddr to the gc list and marks it as dead.
The recent change to keep global IPv6 addresses added a new function,
fixup_permanent_addr, that is called on admin up. That function restarts
dad for an inet6_ifaddr and when it completes the host route attached
to it is inserted into the fib. Since the route was marked dead and
moved to the gc list, re-inserting the route causes the reported
out-of-bounds accesses. If the device with the address is taken down
or the address is removed, the WARN_ON in fib6_del is triggered.
All of those faults are fixed by regenerating the host route if the
existing one has been moved to the gc list, something that can be
determined by checking if the rt6i_ref counter is 0.
Fixes:
f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 25 Apr 2017 14:58:37 +0000 (22:58 +0800)]
bridge: move bridge multicast cleanup to ndo_uninit
During removing a bridge device, if the bridge is still up, a new mdb entry
still can be added in br_multicast_add_group() after all mdb entries are
removed in br_multicast_dev_del(). Like the path:
mld_ifc_timer_expire ->
mld_sendpack -> ...
br_multicast_rcv ->
br_multicast_add_group
The new mp's timer will be set up. If the timer expires after the bridge
is freed, it may cause use-after-free panic in br_multicast_group_expired.
BUG: unable to handle kernel NULL pointer dereference at
0000000000000048
IP: [<
ffffffffa07ed2c8>] br_multicast_group_expired+0x28/0xb0 [bridge]
Call Trace:
<IRQ>
[<
ffffffff81094536>] call_timer_fn+0x36/0x110
[<
ffffffffa07ed2a0>] ? br_mdb_free+0x30/0x30 [bridge]
[<
ffffffff81096967>] run_timer_softirq+0x237/0x340
[<
ffffffff8108dcbf>] __do_softirq+0xef/0x280
[<
ffffffff8169889c>] call_softirq+0x1c/0x30
[<
ffffffff8102c275>] do_softirq+0x65/0xa0
[<
ffffffff8108e055>] irq_exit+0x115/0x120
[<
ffffffff81699515>] smp_apic_timer_interrupt+0x45/0x60
[<
ffffffff81697a5d>] apic_timer_interrupt+0x6d/0x80
Nikolay also found it would cause a memory leak - the mdb hash is
reallocated and not freed due to the mdb rehash.
unreferenced object 0xffff8800540ba800 (size 2048):
backtrace:
[<
ffffffff816e2287>] kmemleak_alloc+0x67/0xc0
[<
ffffffff81260bea>] __kmalloc+0x1ba/0x3e0
[<
ffffffffa05c60ee>] br_mdb_rehash+0x5e/0x340 [bridge]
[<
ffffffffa05c74af>] br_multicast_new_group+0x43f/0x6e0 [bridge]
[<
ffffffffa05c7aa3>] br_multicast_add_group+0x203/0x260 [bridge]
[<
ffffffffa05ca4b5>] br_multicast_rcv+0x945/0x11d0 [bridge]
[<
ffffffffa05b6b10>] br_dev_xmit+0x180/0x470 [bridge]
[<
ffffffff815c781b>] dev_hard_start_xmit+0xbb/0x3d0
[<
ffffffff815c8743>] __dev_queue_xmit+0xb13/0xc10
[<
ffffffff815c8850>] dev_queue_xmit+0x10/0x20
[<
ffffffffa02f8d7a>] ip6_finish_output2+0x5ca/0xac0 [ipv6]
[<
ffffffffa02fbfc6>] ip6_finish_output+0x126/0x2c0 [ipv6]
[<
ffffffffa02fc245>] ip6_output+0xe5/0x390 [ipv6]
[<
ffffffffa032b92c>] NF_HOOK.constprop.44+0x6c/0x240 [ipv6]
[<
ffffffffa032bd16>] mld_sendpack+0x216/0x3e0 [ipv6]
[<
ffffffffa032d5eb>] mld_ifc_timer_expire+0x18b/0x2b0 [ipv6]
This could happen when ip link remove a bridge or destroy a netns with a
bridge device inside.
With Nikolay's suggestion, this patch is to clean up bridge multicast in
ndo_uninit after bridge dev is shutdown, instead of br_dev_delete, so
that netif_running check in br_multicast_add_group can avoid this issue.
v1->v2:
- fix this issue by moving br_multicast_dev_del to ndo_uninit, instead
of calling dev_close in br_dev_delete.
(NOTE: Depends upon
b6fe0440c637 ("bridge: implement missing ndo_uninit()"))
Fixes:
e10177abf842 ("bridge: multicast: fix handling of temp and perm entries")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Tue, 25 Apr 2017 13:56:50 +0000 (15:56 +0200)]
ipv6: fix source routing
Commit
a149e7c7ce81 ("ipv6: sr: add support for SRH injection through
setsockopt") introduced handling of IPV6_SRCRT_TYPE_4, but at the same
time restricted it to only IPV6_SRCRT_TYPE_0 and
IPV6_SRCRT_TYPE_4. Previously, ipv6_push_exthdr() and fl6_update_dst()
would also handle other values (ie STRICT and TYPE_2).
Restore previous source routing behavior, by handling IPV6_SRCRT_STRICT
and IPV6_SRCRT_TYPE_2 the same way as IPV6_SRCRT_TYPE_0 in
ipv6_push_exthdr() and fl6_update_dst().
Fixes:
a149e7c7ce81 ("ipv6: sr: add support for SRH injection through setsockopt")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
sudarsana.kalluru@cavium.com [Tue, 25 Apr 2017 03:59:10 +0000 (20:59 -0700)]
qed: Fix error in the dcbx app meta data initialization.
DCBX app_data array is initialized with the incorrect values for
personality field. This would prevent offloaded protocols from
honoring the PFC.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Tue, 25 Apr 2017 01:33:38 +0000 (18:33 -0700)]
netvsc: fix calculation of available send sections
My change (introduced in 4.11) to use find_first_clear_bit
incorrectly assumed that the size argument was words, not bits.
The effect was only a small limited number of the available send
sections were being actually used. This can cause performance loss
with some workloads.
Since map_words is now used only during initialization, it can
be on stack instead of in per-device data.
Fixes:
b58a185801da ("netvsc: simplify get next send section")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Kemnade [Mon, 24 Apr 2017 19:18:39 +0000 (21:18 +0200)]
net: hso: fix module unloading
keep tty driver until usb driver is unregistered
rmmod hso
produces traces like this without that:
[40261.645904] usb 2-2: new high-speed USB device number 2 using ehci-omap
[40261.854644] usb 2-2: New USB device found, idVendor=0af0, idProduct=8800
[40261.862609] usb 2-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[40261.872772] usb 2-2: Product: Globetrotter HSUPA Modem
[40261.880279] usb 2-2: Manufacturer: Option N.V.
[40262.021270] hso 2-2:1.5: Not our interface
[40265.556945] hso: unloaded
[40265.559875] usbcore: deregistering interface driver hso
[40265.595947] Unable to handle kernel NULL pointer dereference at virtual address
00000033
[40265.604522] pgd =
ecb14000
[40265.611877] [
00000033] *pgd=
00000000
[40265.617034] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[40265.622650] Modules linked in: hso(-) bnep bluetooth ipv6 arc4 twl4030_madc_hwmon wl18xx wlcore mac80211 cfg80211 snd_soc_simple_card snd_soc_simple_card_utils snd_soc_omap_twl4030 snd_soc_gtm601 generic_adc_battery extcon_gpio omap3_isp videobuf2_dma_contig videobuf2_memops wlcore_sdio videobuf2_v4l2 videobuf2_core ov9650 bmp280_i2c v4l2_common bmp280 bmg160_i2c bmg160_core at24 nvmem_core videodev bmc150_accel_i2c bmc150_magn_i2c media bmc150_accel_core tsc2007 bmc150_magn leds_tca6507 bno055 snd_soc_omap_mcbsp industrialio_triggered_buffer snd_soc_omap kfifo_buf snd_pcm_dmaengine gpio_twl4030 snd_soc_twl4030 twl4030_vibra twl4030_madc wwan_on_off ehci_omap pwm_bl pwm_omap_dmtimer panel_tpo_td028ttec1 encoder_opa362 connector_analog_tv omapdrm drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect
[40265.698211] sysimgblt fb_sys_fops cfbcopyarea drm omapdss usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap2430 phy_twl4030_usb musb_hdrc twl4030_charger industrialio w2sg0004 twl4030_pwrbutton bq27xxx_battery w1_bq27000 omap_hdq [last unloaded: hso]
[40265.723175] CPU: 0 PID: 2701 Comm: rmmod Not tainted 4.11.0-rc6-letux+ #6
[40265.730346] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[40265.736938] task:
ecb81100 task.stack:
ecb82000
[40265.741729] PC is at cdev_del+0xc/0x2c
[40265.745666] LR is at tty_unregister_device+0x40/0x50
[40265.750915] pc : [<
c027472c>] lr : [<
c04b3ecc>] psr:
600b0113
sp :
ecb83ea8 ip :
eca4f898 fp :
00000000
[40265.763000] r10:
00000000 r9 :
00000000 r8 :
00000001
[40265.768493] r7 :
eca4f800 r6 :
00000003 r5 :
00000000 r4 :
ffffffff
[40265.775360] r3 :
c1458d54 r2 :
00000000 r1 :
00000004 r0 :
ffffffff
[40265.782257] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[40265.789764] Control:
10c5387d Table:
acb14019 DAC:
00000051
[40265.795806] Process rmmod (pid: 2701, stack limit = 0xecb82218)
[40265.802062] Stack: (0xecb83ea8 to 0xecb84000)
[40265.806640] 3ea0:
ec9e8100 c04b3ecc bf737378 ed5b7c00 00000003 bf7327ec
[40265.815277] 3ec0:
eca4f800 00000000 ec9fd800 eca4f800 bf737070 bf7328bc eca4f820 c05a9a04
[40265.823883] 3ee0:
eca4f820 00000000 00000001 eca4f820 ec9fd870 bf737070 eca4f854 ec9fd8a4
[40265.832519] 3f00:
ecb82000 00000000 00000000 c04e6960 eca4f820 bf737070 bf737048 00000081
[40265.841125] 3f20:
c01071e4 c04e6a60 ecb81100 bf737070 bf737070 c04e5d94 bf737020 c05a8f88
[40265.849731] 3f40:
bf737100 00000800 7f5fa254 00000081 c01071e4 c01c4afc 00000000 006f7368
[40265.858367] 3f60:
ecb815f4 00000000 c0cac9c4 c01071e4 ecb82000 00000000 00000000 c01512f4
[40265.866973] 3f80:
ed5b3200 c01071e4 7f5fa220 7f5fa220 bea78ec9 0010711c 7f5fa220 7f5fa220
[40265.875579] 3fa0:
bea78ec9 c0107040 7f5fa220 7f5fa220 7f5fa254 00000800 dd35b800 dd35b800
[40265.884216] 3fc0:
7f5fa220 7f5fa220 bea78ec9 00000081 bea78dcc 00000000 bea78bd8 00000000
[40265.892822] 3fe0:
b6f70521 bea78b6c 7f5dd613 b6f70526 80070030 7f5fa254 ffffffff ffffffff
[40265.901458] [<
c027472c>] (cdev_del) from [<
c04b3ecc>] (tty_unregister_device+0x40/0x50)
[40265.909942] [<
c04b3ecc>] (tty_unregister_device) from [<
bf7327ec>] (hso_free_interface+0x80/0x144 [hso])
[40265.919982] [<
bf7327ec>] (hso_free_interface [hso]) from [<
bf7328bc>] (hso_disconnect+0xc/0x18 [hso])
[40265.929718] [<
bf7328bc>] (hso_disconnect [hso]) from [<
c05a9a04>] (usb_unbind_interface+0x84/0x200)
[40265.939239] [<
c05a9a04>] (usb_unbind_interface) from [<
c04e6960>] (device_release_driver_internal+0x138/0x1cc)
[40265.949798] [<
c04e6960>] (device_release_driver_internal) from [<
c04e6a60>] (driver_detach+0x60/0x6c)
[40265.959503] [<
c04e6a60>] (driver_detach) from [<
c04e5d94>] (bus_remove_driver+0x64/0x8c)
[40265.968017] [<
c04e5d94>] (bus_remove_driver) from [<
c05a8f88>] (usb_deregister+0x5c/0xb8)
[40265.976654] [<
c05a8f88>] (usb_deregister) from [<
c01c4afc>] (SyS_delete_module+0x160/0x1dc)
[40265.985443] [<
c01c4afc>] (SyS_delete_module) from [<
c0107040>] (ret_fast_syscall+0x0/0x1c)
[40265.994171] Code:
c1458d54 e59f3020 e92d4010 e1a04000 (
e5941034)
[40266.016693] ---[ end trace
9d5ac43c7e41075c ]---
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthasarathy Bhuvaragan [Mon, 24 Apr 2017 13:00:43 +0000 (15:00 +0200)]
tipc: fix socket flow control accounting error at tipc_recv_stream
Until now in tipc_recv_stream(), we update the received
unacknowledged bytes based on a stack variable and not based on the
actual message size.
If the user buffer passed at tipc_recv_stream() is smaller than the
received skb, the size variable in stack differs from the actual
message size in the skb. This leads to a flow control accounting
error causing permanent congestion.
In this commit, we fix this accounting error by always using the
size of the incoming message.
Fixes:
10724cc7bb78 ("tipc: redesign connection-level flow control")
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthasarathy Bhuvaragan [Mon, 24 Apr 2017 13:00:42 +0000 (15:00 +0200)]
tipc: fix socket flow control accounting error at tipc_send_stream
Until now in tipc_send_stream(), we return -1 when the socket
encounters link congestion even if the socket had successfully
sent partial data. This is incorrect as the application resends
the same the partial data leading to data corruption at
receiver's end.
In this commit, we return the partially sent bytes as the return
value at link congestion.
Fixes:
10724cc7bb78 ("tipc: redesign connection-level flow control")
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Takashi Iwai [Tue, 25 Apr 2017 15:43:56 +0000 (17:43 +0200)]
Merge tag 'asoc-fix-v4.11-rc7' of git://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.11
A few last minute fixes for v4.11, the STI fix is relatively large but
driver specific and has been cooking in -next for a little while now:
- A fix from Takashi for some suspend/resume related crashes in the
Intel drivers.
- A fix from Mousumi Jana for issues with incorrectly created
enumeration controls generated from topology files which could cause
problems for userspace.
- Fixes from Arnaud Pouliquen for some crashes due to races with the
interrupt handler in the STI driver.
Paolo Abeni [Mon, 24 Apr 2017 12:18:28 +0000 (14:18 +0200)]
ipv6: move stub initialization after ipv6 setup completion
The ipv6 stub pointer is currently initialized before the ipv6
routing subsystem: a 3rd party can access and use such stub
before the routing data is ready.
Moreover, such pointer is not cleared in case of initialization
error, possibly leading to dangling pointers usage.
This change addresses the above moving the stub initialization
at the end of ipv6 init code.
Fixes:
5f81bd2e5d80 ("ipv6: export a stub for IPv6 symbols used by vxlan")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Mon, 24 Apr 2017 10:29:16 +0000 (18:29 +0800)]
team: fix memory leaks
In functions team_nl_send_port_list_get() and
team_nl_send_options_get(), pointer skb keeps the return value of
nlmsg_new(). When the call to genlmsg_put() fails, the memory is not
freed(). This will result in memory leak bugs.
Fixes:
9b00cf2d1024 ("team: implement multipart netlink messages for options transfers")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mark Brown [Tue, 25 Apr 2017 15:25:07 +0000 (16:25 +0100)]
Merge remote-tracking branches 'asoc/fix/intel', 'asoc/fix/topology' and 'asoc/fix/sti' into asoc-linus
David S. Miller [Tue, 25 Apr 2017 15:20:30 +0000 (11:20 -0400)]
Merge tag 'linux-can-fixes-for-4.11-
20170425' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2017-04-25
this is a pull request of three patches for net/master.
There are two patches by Stephane Grosjean for that add a new variant to the
PCAN-Chip USB driver. The other patch is by Maksim Salau, which swtiches the
memory for USB transfers from heap to stack.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bert Kenward [Tue, 25 Apr 2017 12:44:54 +0000 (13:44 +0100)]
sfc: tx ring can only have 2048 entries for all EF10 NICs
Fixes:
dd248f1bc65b ("sfc: Add PCI ID for Solarflare 8000 series 10/40G NIC")
Reported-by: Patrick Talbert <ptalbert@redhat.com>
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Takashi Iwai [Mon, 24 Apr 2017 12:09:55 +0000 (14:09 +0200)]
ASoC: intel: Fix PM and non-atomic crash in bytcr drivers
The FE setups of Intel SST bytcr_rt5640 and bytcr_rt5651 drivers carry
the ignore_suspend flag, and this prevents the suspend/resume working
properly while the stream is running, since SST core code has the
check of the running streams and returns -EBUSY. Drop these
superfluous flags for fixing the behavior.
Also, the bytcr_rt5640 driver lacks of nonatomic flag in some FE
definitions, which leads to the kernel Oops at suspend/resume like:
BUG: scheduling while atomic: systemd-sleep/3144/0x00000003
Call Trace:
dump_stack+0x5c/0x7a
__schedule_bug+0x55/0x70
__schedule+0x63c/0x8c0
schedule+0x3d/0x90
schedule_timeout+0x16b/0x320
? del_timer_sync+0x50/0x50
? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core]
? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core]
? remove_wait_queue+0x60/0x60
? sst_prepare_and_post_msg+0x275/0x960 [snd_intel_sst_core]
? sst_pause_stream+0x9b/0x110 [snd_intel_sst_core]
....
This patch addresses these appropriately, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # v4.1+
Herbert Xu [Thu, 20 Apr 2017 12:55:12 +0000 (20:55 +0800)]
macvlan: Fix device ref leak when purging bc_queue
When a parent macvlan device is destroyed we end up purging its
broadcast queue without dropping the device reference count on
the packet source device. This causes the source device to linger.
This patch drops that reference count.
Fixes:
260916dfb48c ("macvlan: Fix potential use-after free for...")
Reported-by: Joe Ghalam <Joe.Ghalam@dell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Spychała [Thu, 20 Apr 2017 10:04:10 +0000 (12:04 +0200)]
usb: plusb: Add support for PL-27A1
This patch adds support for the PL-27A1 by adding the appropriate
USB ID's. This chip is used in the goobay Active USB 3.0 Data Link
and Unitek Y-3501 cables.
Signed-off-by: Roman Spychała <roed@onet.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maksim Salau [Sun, 23 Apr 2017 17:31:40 +0000 (20:31 +0300)]
net: can: usb: gs_usb: Fix buffer on stack
Allocate buffers on HEAP instead of STACK for local structures
that are to be sent using usb_control_msg().
Signed-off-by: Maksim Salau <maksim.salau@gmail.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.8
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stephane Grosjean [Mon, 27 Mar 2017 12:36:11 +0000 (14:36 +0200)]
can: usb: Kconfig: Add PCAN-USB X6 device in help text
This patch adds a text line in the help section of the CAN_PEAK_USB
config item describing the support of the PCAN-USB X6 adapter, which is
already included in the Kernel since 4.9.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stephane Grosjean [Mon, 27 Mar 2017 12:36:10 +0000 (14:36 +0200)]
can: usb: Add support of PCAN-Chip USB stamp module
This patch adds the support of the PCAN-Chip USB, a stamp module for
customer hardware designs, which communicates via USB 2.0 with the
hardware. The integrated CAN controller supports the protocols CAN 2.0 A/B
as well as CAN FD. The physical CAN connection is determined by external
wiring. The Stamp module with its single-sided mounting and plated
half-holes is suitable for automatic assembly.
Note that the chip is equipped with the same logic than the PCAN-USB FD.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Dmitry Torokhov [Thu, 13 Apr 2017 22:36:31 +0000 (15:36 -0700)]
Input: i8042 - add Clevo P650RS to the i8042 reset list
Clevo P650RS and other similar devices require i8042 to be reset in order
to detect Synaptics touchpad.
Reported-by: Paweł Bylica <chfast@gmail.com>
Tested-by: Ed Bordin <edbordin@gmail.com>
Cc: stable@vger.kernel.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=190301
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
David S. Miller [Mon, 24 Apr 2017 22:28:57 +0000 (18:28 -0400)]
Merge branch 'dsa-b53-58xx-fixes'
Florian Fainelli says:
====================
net: dsa: b53: BCM58xx devices fixes
This patch series contains fixes for the 58xx devices (Broadcom Northstar
Plus), which were identified thanks to the help of Eric Anholt.
====================
Tested-by: Eric Anholt <eric@anholt.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 24 Apr 2017 21:27:23 +0000 (14:27 -0700)]
net: dsa: b53: Fix CPU port for 58xx devices
The 58xx devices (Northstar Plus) do actually have their CPU port wired
at port 8, it was unfortunately set to port 5 (B53_CPU_PORT_25) which is
incorrect, since that is the second possible management port.
Fixes:
991a36bb4645 ("net: dsa: b53: Add support for BCM585xx/586xx/88312 integrated switch")
Reported-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 24 Apr 2017 21:27:22 +0000 (14:27 -0700)]
net: dsa: b53: Implement software reset for 58xx devices
Implement the correct software reset sequence for 58xx devices by
setting all 3 reset bits and polling for the SW_RST bit to clear itself
without a given timeout. We cannot use is58xx() here because that would
also include the 7445/7278 Starfighter 2 which have their own driver
doing the reset earlier on due to the HW specific integration.
Fixes:
991a36bb4645 ("net: dsa: b53: Add support for BCM585xx/586xx/88312 integrated switch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>