OSDN Git Service
Phong Tran [Wed, 27 May 2015 14:31:03 +0000 (21:31 +0700)]
greybus: svc: use macro for init and exit protocol
Change to gb_gpbridge_protocol_driver for
making the consitent with other drivers.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Phong Tran [Wed, 27 May 2015 14:31:02 +0000 (21:31 +0700)]
greybus: svc: Fix endian of hotplug request data
data of hotplug request should exchange to native
CPU format before assignment.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Greg Kroah-Hartman [Tue, 26 May 2015 15:39:33 +0000 (08:39 -0700)]
greybus: Merge branch 'master' of github.com:gregkh/greybus
Alex Elder [Fri, 22 May 2015 18:02:08 +0000 (13:02 -0500)]
greybus: introduce SVC protocol
This patch adds support for the Greybus SVC protocol. We may want
to rearrange protocol numbers at some point, since this is a pretty
fundamental protocol.
Note: It has only been compile tested; no SVC CPorts have yet been
defined, so this code is not yet exercised.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Fri, 22 May 2015 17:59:16 +0000 (12:59 -0500)]
greybus: update copyrights
Update the copyright statements for recently-modified source files.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Fri, 22 May 2015 17:59:15 +0000 (12:59 -0500)]
greybus: add copyright statements
The Greybus audio source files included no copyright statements.
Add them.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Fri, 22 May 2015 17:56:49 +0000 (12:56 -0500)]
greybus: core: don't set up endo until host device is initialized
Currently, the data structure representing an Endo is set up at the
time a host device gets created. This is too early.
Once the control infrastructure is in place, there's no sense in
setting up the Endo utnil after we have heard from the SVC via a
probe operation on our control CPort. And even then, there's
no real point until we've successfully authenticated with the SVC,
which will be indicated by the arrival of the Control protocol
"connected" operation request notifying us that our SVC CPort
is operational.
In addition to this logical argument, we also can't actually
receive any messages on the Control CPort until the host device
is set up and ready to receive messages. At the point we're
currently setting up the Endo data structure, that has not yet
been done.
Define a new exported function greybus_endo_setup(), which will
be used (for now) as the entry point for setting up the Endo
data structure. Arrange to call it in the host USB driver
probe method, *after* we are set up for handling messages.
Note: Once the control protocol has been implemented, this function
may no longer need to be exported.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Fri, 22 May 2015 17:56:48 +0000 (12:56 -0500)]
greybus: endo: record AP interface id
The AP resides in a particular position on an Endo, which is
identified by an interface ID. (For now we'll assume the AP uses
just one interface.) Record the this AP interface ID when creating
an Endo. Add a sysfs attribute to display it as well.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Fri, 22 May 2015 17:56:47 +0000 (12:56 -0500)]
greybus: endo: rework some attributes
The SVC is not the same as the Endo. There are some attributes
(such as the Endo ID) that are independent of attributes of
the SVC (like its version).
The current "Endo attributes" are really SVC attributes.
Rename a few functions and variables to reflect that.
Add a new attribute group for Endo-specific attributes, and
populate it with the Endo ID.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Fri, 22 May 2015 17:56:46 +0000 (12:56 -0500)]
greybus: endo: encapsulate computing the max interface id
The maximum interface id on an Endo is the result of a non-trivial
calculation. It'll be needed for an upcoming patch, so create a
macro to compute it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Fri, 22 May 2015 17:35:32 +0000 (12:35 -0500)]
greybus: rename "gpbridge.h"
The file "gpbridge.h" is now used as a single place to define
all protocol message structures. These protocols are not
necessarily related to the GP bridge, so the name of the
file is misleading.
Rename it "greybus_protocols.h".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Fri, 22 May 2015 17:35:31 +0000 (12:35 -0500)]
greybus: include "gpbridge.h" from "greybus.h"
Avoid the need for all the source files to include "gpbridge.h"
by just having "greybus.h" include it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Fri, 22 May 2015 14:52:45 +0000 (09:52 -0500)]
greybus: core: return error code when creating host device
Return a pointer-coded error from greybus_create_hd() rather
than NULL in the event an error occurs.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Fri, 22 May 2015 14:52:44 +0000 (09:52 -0500)]
greybus: core: return error code when creating endo
Return a pointer-coded error from gb_endo_create() rather than just
a null pointer in the event an error occurs.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Fri, 22 May 2015 14:52:43 +0000 (09:52 -0500)]
greybus: endo: pass endo_id to gb_endo_create()
We are going to want to defer creating the endo until we receive a
probe operation from the SVC, which will supply the endo id. Change
gb_endo_create() so it passes the endo_id value as an argument.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Fri, 22 May 2015 14:52:42 +0000 (09:52 -0500)]
greybus: endo: rename gb_svc
Change the name of "struct gb_svc" to be "struct svc_info". The
structure now contains only the SVC's serial number and version (and
are place holders anyway). We will be defining a structure that
represents the SVC for the SVC protocol connection, and I want to
take back that name.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Mark A. Greer [Thu, 21 May 2015 22:57:04 +0000 (15:57 -0700)]
greybus: gb-audio: Set samples per message during init
A recent commit moved the I2S samples per message operation
to the PCM's 'hw_params' callback. However, the 'hw_params'
callback is called numerous times while the samples per
message need only be done once (or seldom). Eliminate the
unnecessary samples per message operations by doing it only
once at Greybus protocol init time.
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Mark A. Greer [Thu, 21 May 2015 22:57:03 +0000 (15:57 -0700)]
greybus: gb-audio: Set I2S Configuration according to ASOC requests
Currently, the audio driver unconditionally sets the I2S
configuration to have a sample rate of 48KHz, two channels,
16 bits per channel, in little endian order. Make this
more flexible by setting the I2S configuration according to
the arguments passed to the PCM 'hw_params' callback.
To accomplish this, query for the supported I2S configurations
at Greybus protocol init time and save them in the 'snd_dev'
structure. When the 'hw_params' callback is called, compare its
arguments to the table of supported configurations. If there is
a match, set the I2S connection accordingly.
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Mark A. Greer [Thu, 21 May 2015 22:57:02 +0000 (15:57 -0700)]
greybus: gb-audio: Activate TX connection Bundle CPort ID
Currently, the audio driver activates & deactivates a predefined
CPort ID but that can vary depending on the manifest data of the
module. Instead, use the TX connection's Bundle CPort ID which
contains the correct CPort ID.
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Mark A. Greer [Thu, 21 May 2015 22:57:01 +0000 (15:57 -0700)]
greybus: gb-audio: Activate TX CPort in PCM workqueue
Currently, the I2S TX CPort is configured and activated during
the Greybus audio initialization. Unfortunately, this prevents
the audio driver from ever changing the I2S configuration.
To allow the I2S configuration to change according to ASOC requests,
move the CPort activation & deactivation to the audio-pcm workqueue.
Now, when audio is running but the CPort is not active, it will be
activated. When audio is not running and the CPort is active, it
will be deactivated.
This has the side-effect of sending the first piece of audio data
immediately after activating the CPort which is really how it should
work anyway.
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Mark A. Greer [Thu, 21 May 2015 22:57:00 +0000 (15:57 -0700)]
greybus: gb-audio: Remove useless comment
Remove comment about adding start delay since it will
be done when support for A/V synchronization is added.
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Mark A. Greer [Thu, 21 May 2015 22:56:59 +0000 (15:56 -0700)]
greybus: gb-audio: Add I2C device for rt5647 codec
Add the I2C device node for the rt5647 codec.
Eventually, this will be done automatically somewhere
else but for now its done in the audio driver.
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Mark A. Greer [Thu, 21 May 2015 22:56:58 +0000 (15:56 -0700)]
greybus: gb-audio: cpu_dai.fmt does not exist in v4.1
The asoc_simple_dai structure does not contain the 'fmt'
member in Linux kernel version v4.1 and later so only
build code that uses it when the kernel version is earlier
than v4.1.
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Mark A. Greer [Thu, 21 May 2015 22:56:57 +0000 (15:56 -0700)]
greybus: gb-audio: Fix DAI formats and master/slave settings
Set the various DAI formats so the bridge on the module
is the master of all clocks and the codec is the slave.
The only DAI protocol currently supported is I2S.
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Mark A. Greer [Thu, 21 May 2015 22:56:56 +0000 (15:56 -0700)]
greybus: gb-audio: Clean up codec name generation
Instead of using the fixed suffix, '6-001b', in the
codec name, generate it from the I2S adapter number
and I2C address of the codec.
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Mark A. Greer [Thu, 21 May 2015 22:54:48 +0000 (15:54 -0700)]
greybus: gb-audio: Allocate space for 20 configurations
The greybus code requires that an operation's response buffer be
the exact size of the response; however, the size of the response to
the GB_I2S_MGMT_TYPE_GET_SUPPORTED_CONFIGURATIONS operation is unknown.
To fix this, an extension to the I2S specification is required.
In the meantime, set the number of configurations returned to 20
because that is how many configurations will be returned (using
"insider knowledge" of the firmware).
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Mark A. Greer [Thu, 21 May 2015 22:54:27 +0000 (15:54 -0700)]
greybus: gb-audio: Set clock edges to match rt5647 codec requirements
The rt5647 codec on speaker and mediabar modules require that
the following clock edge settings:
ll_wclk_change_edge GB_I2S_MGMT_EDGE_FALLING
ll_wclk_tx_edge GB_I2S_MGMT_EDGE_RISING
ll_wclk_rx_edge GB_I2S_MGMT_EDGE_FALLING
(Those are the setting that work, at least). So make the Greybus
audio driver configure the GPBridge with those settings.
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Johan Hovold [Thu, 21 May 2015 09:47:24 +0000 (11:47 +0200)]
greybus: gpbridge: fix section mismatches
Fix section mismatches introduced by
b27227ce93c0 ("greybus: Use
gb_gpbridge_protocol_init()"), which added __exit annotation to
gpbridge-protocol exit functions that are called in the error path of
gpbridge_init, which lives in the init section.
This triggered the following modpost warning:
WARNING: modpost: Found 8 section mismatch(es).
Fixes:
16b33d100bff ("protocol: Add gb_gpbridge_protocol_driver()")
Fixes:
b27227ce93c0 ("greybus: Use gb_gpbridge_protocol_init()")
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Johan Hovold [Tue, 19 May 2015 09:22:46 +0000 (11:22 +0200)]
greybus: operation: add helper to retrieve max payload size
Add helper to retrieve the maximum payload size for operations on a
specific connection.
Note that the helper is not inlined due to how the header files are
currently organised, but it is not expected to be called after a
connection has been initialised either.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Johan Hovold [Tue, 19 May 2015 09:22:45 +0000 (11:22 +0200)]
greybus: core: add lower-limit for host-device buffers
Make sure we never end up with a host device with maximum buffer size
smaller than the shortest Greybus message.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Johan Hovold [Tue, 19 May 2015 09:22:44 +0000 (11:22 +0200)]
greybus: operation: allow maximum-sized messages
Increase the maximum allowed buffer size to the full 16-bit range
supported by the protocol.
Note that host devices will generally use smaller buffers than the
maximum.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Johan Hovold [Tue, 19 May 2015 09:22:43 +0000 (11:22 +0200)]
greybus: fix host-device buffer constraints
Host devices impose buffer-size constraints on Greybus core which are
taken into account when allocating messages.
Make sure to verify these constraints when the host device is allocated,
rather than when the first message is allocated.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Johan Hovold [Tue, 19 May 2015 09:22:42 +0000 (11:22 +0200)]
greybus: remove unused prototypes from header
Remove a couple of unused function prototypes from the greybus header
file.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Johan Hovold [Tue, 19 May 2015 09:22:41 +0000 (11:22 +0200)]
greybus: remove unnecessary greybus.h includes
Remove unnecessary greybus.h include from header files.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Wed, 20 May 2015 11:50:10 +0000 (17:20 +0530)]
greybus: Use gb_gpbridge_protocol_init()
Start using gb_gpbridge_protocol_init() in gpbridge drivers.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Wed, 20 May 2015 11:50:09 +0000 (17:20 +0530)]
greybus: protocol: Add gb_gpbridge_protocol_driver()
There are many gpbridge protocol drivers that need gb_protocol_driver()
without the module_init/exit() lines. Lets create one for them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Wed, 20 May 2015 11:26:46 +0000 (16:56 +0530)]
greybus: gpbridge: rename gpb.c to gpbridge.c
That's what followed for .h, etc.. Rename for better consistency.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Wed, 20 May 2015 11:24:22 +0000 (16:54 +0530)]
greybus: raw: move module_{init|exit} to the end of functions
This is what coding guidelines say. Lets do it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Wed, 20 May 2015 11:18:04 +0000 (16:48 +0530)]
greybus: module: name routines consistently
Routines should be named this way: gb_<object>_<operation>. Fix all
routines that don't match this.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Wed, 20 May 2015 12:03:51 +0000 (17:33 +0530)]
greybus: interface: name routines consistently
Routines should be named this way: gb_<object>_<operation>. Fix all
routines that don't match this.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Wed, 20 May 2015 11:18:01 +0000 (16:48 +0530)]
greybus: endo: name routines consistently
Routines should be named this way: gb_<object>_<operation>. Fix all
routines that don't match this.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Wed, 20 May 2015 11:18:00 +0000 (16:48 +0530)]
greybus: connection: name routines consistently
Routines should be named this way: gb_<object>_<operation>. Fix all
routines that don't match this.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Wed, 20 May 2015 11:17:59 +0000 (16:47 +0530)]
greybus: protocol: remove leading underscore from _gb_protocol_find()
Remove the unnecessary underscore from _gb_protocol_find().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Wed, 20 May 2015 11:03:57 +0000 (16:33 +0530)]
greybus: spi: Move structure definitions into gpbridge.h
In order to facilitate re-use of spi structures, split them out of
independent files and add them into a shared gpbridge.h
This will be a prereq to sharing these headers w/ gbsim.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Wed, 20 May 2015 11:02:28 +0000 (16:32 +0530)]
greybus: gpio: fix tab/space mistake
Spaces were present in place of tab. Fix that.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Wed, 20 May 2015 11:01:19 +0000 (16:31 +0530)]
greybus: raw: include uaccess.h to fix warning
This is what I get over mainline:
greybus/raw.c: In function 'gb_raw_send':
greybus/raw.c:153:2: error: implicit declaration of function 'copy_from_user' [-Werror=implicit-function-declaration]
if (copy_from_user(&request->data[0], data, len)) {
^
greybus/raw.c: In function 'raw_read':
greybus/raw.c:305:2: error: implicit declaration of function 'copy_to_user' [-Werror=implicit-function-declaration]
if (copy_to_user(buf, &raw_data->data[0], raw_data->len)) {
^
Fix this by including uaccess.h.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Greg Kroah-Hartman [Fri, 8 May 2015 13:50:17 +0000 (15:50 +0200)]
greybus: raw: add raw greybus kernel driver
This adds a driver that implements the greybus Raw protocol as
specified.
It preserves the message boundries by only allowing a read to receive
a "full" message, and any write() call also is passed in a single
greybus request.
Totally untested, given that we have no raw firmware or gbsim code yet.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Greg Kroah-Hartman [Thu, 14 May 2015 17:40:02 +0000 (10:40 -0700)]
greybus: connection: remove lock around ida_simple_* functions
ida_simple_* has a built-in spinlock, no need to grab another lock when
accessing it.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Greg Kroah-Hartman [Thu, 14 May 2015 17:39:35 +0000 (10:39 -0700)]
greybus: vibrator: convert idr to be an ida
All we need is a simple ida, so use that interface instead of the more
"complex" idr one. Bonus is we don't need to fix the locking issue I
forgot about when using an idr, as ida has one built-in.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Phong Tran [Thu, 14 May 2015 16:03:04 +0000 (23:03 +0700)]
greybus: loopback: add more clean up when init connection fails
It should remove the object from sysfs when loopback
connection init error.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Rui Miguel Silva [Wed, 13 May 2015 17:59:00 +0000 (18:59 +0100)]
greybus: make: check kernel configuration options
Add checks for options that shall be enabled in the kernel config
and for options that shall be disable.
To add options to list append them to CONFIG_OPTIONS_ENABLE or
CONFIG_OPTIONS_DISABLE respectively.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Tue, 12 May 2015 02:16:39 +0000 (21:16 -0500)]
greybus: loopback: support module-initiated requests
There's no reason we can't support loopback pings or transfers
initiated by the module. Allow it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Tue, 12 May 2015 02:16:38 +0000 (21:16 -0500)]
greybus: loopback: define loopback functions symbolically
Add some symbols to indicate what kind of "function" the
loopback thread is supposed to be performing--the type of
traffic it generates over its connection.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Tue, 12 May 2015 02:16:37 +0000 (21:16 -0500)]
greybus: loopback: symbolically define max wait time
Use a symbolic constant to define the maximum time (number of
milliseconds) to delay between initiated operations.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Tue, 12 May 2015 02:16:36 +0000 (21:16 -0500)]
greybus: loopback: fix an incorrect comment
Fix a comment that incorrectly says the delay between messages is
limited to 1024 msec; it actually must be <= 1000 msec.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Tue, 12 May 2015 02:16:35 +0000 (21:16 -0500)]
greybus: loopback: return the right error value
If an error occurs starting up the loopback thread, the error code
is not extracted properly. Fix that.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Tue, 12 May 2015 02:16:34 +0000 (21:16 -0500)]
greybus: loopback: fix the type attribute check
In gb_loopback_check_attr(), the value of gb->type is checked for
validity. The only valid values are 0, 1, and 2. But the check
allows the value 3. Fix that.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Greg Kroah-Hartman [Mon, 11 May 2015 21:09:32 +0000 (14:09 -0700)]
greybus: audio: fix a bunch of endian issues
sparse is rightfully complaining about a lack of converting when
accessing or assigning to little endian fields. Fix them all up to work
properly.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Greg Kroah-Hartman [Mon, 11 May 2015 21:09:09 +0000 (14:09 -0700)]
greybus: audio: fix some sparse static warnings
This makes some functions and structures static, as warned by sparse, as
they don't need to be global.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Rui Miguel Silva [Mon, 11 May 2015 18:22:03 +0000 (19:22 +0100)]
greybus: manifest: be coherent with protocol name
remane protocol define from GREYBUS_PROTOCOL_LED to GREYBUS_PROTOCOL_LIGHTS to
be coherent with the specification.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Fri, 8 May 2015 07:28:51 +0000 (12:58 +0530)]
greybus: endo: Create modules after validating Endo ID
We already have code to parse Endo ID, lets use it to create modules at
run time instead of creating them from a static array.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Fri, 8 May 2015 07:28:50 +0000 (12:58 +0530)]
greybus: endo: Add code to validate Endo ID
Endo is described by a 16 bit value. Which represents the properties of
modules, interface and ribs on front and back of endo.
This 16 bit value can be used to find all possible pairs of modules and
interfaces and creating modules based on that.
This patch provides helpers to parse 16 bit Endo ID.
(Based on original code written by Alex Elder.)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Greg Kroah-Hartman [Fri, 8 May 2015 20:40:47 +0000 (22:40 +0200)]
greybus: gb-audio: fix build breakage on 4.1-rc1
In commit
1efb53a220b7 ("ASoC: simple-card: Remove support for setting
differing DAI formats"), the .fmt field was removed from struct
asoc_simple_dai. Fix this build breakage by not trying to set it.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Greg Kroah-Hartman [Fri, 8 May 2015 20:33:36 +0000 (22:33 +0200)]
greybus: gb-audio: fix build warning
sizeof wants %zu when on a 64bit build, so change the dev_err() call to
remove a build warning in the audio.c file.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Bryan O'Donoghue [Fri, 8 May 2015 00:00:50 +0000 (17:00 -0700)]
greybus: Support building greybus on host PC
Introduce INSTALL_MOD_PATH to allow for building and installing of the
greybus modules from a different location.
This lets you build the greybus modules on a PC and then install the
modules to an SD card in the appropriate location relative to the SD such
as /media/sdcard/lib/modules/version and subsequent running of depmod in
the same location. If INSTALL_MOD_PATH isn't specified the default
behaviour of installing and depmoding to /lib/modules/version is
maintained.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
John Stultz [Fri, 8 May 2015 19:57:36 +0000 (12:57 -0700)]
greybus: gb-audio: Add integrated greybus audio driver
So here's the current greybus audio driver, which I
wanted to send out for more serious review and
consideration for merging.
I've tried to integrate much of the feedback from the
last round and most of the hotplug issues that I've found
have been resolved. I've tested this via gbsim, and the
Android ARA HAL layer seems to work with it.
Mark has also successfully played audio with this driver,
adding a few hacks to get the codec's i2c connection to
probe.
Current issues:
* Hotplug problem - When gbsim is killed, or the module
removed, the greybus driver gets stuck since the android
mediaserver process is holding the audio device open.
Killing the mediaserver allows things to clean up and
allows greybus to accept new gbsim connections. I have
a workaround patch to the soc-core.c logic which converts
the snd_card_free() call to snd_card_free_when_closed()
which allows the greybus connection cleanup to finish.
Remaining todos:
* Probably need to break apart the mgmt_setup function
to integrate better with the constraint logic. I took
a really basic stab at this, but more is probably
needed.
* Figure out how to properly find and tie in the
codec's I2C bus-id to the driver.
This code requires that the kernel support the following
config options, which I've enabled in a separate kernel
patch:
CONFIG_SND_SIMPLE_CARD
CONFIG_SND_SOC_SPDIF
CONFIG_SND_SOC_RT5645
I really can't calim to be the sole author of this, since
many many fixes and tweaks that have been folded in have
come from Mark Greer. His analsysis and debugging is really
what has made this dummy-framework driver evolve into an
actual audio driver. So much credit and thanks to Mark!
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Thu, 7 May 2015 18:03:52 +0000 (13:03 -0500)]
greybus: eliminate extra response flag definitions
All protocols use the same value to distinguish between request and
response message types. This is a requirement.
Use GB_MESSAGE_TYPE_RESPONSE rather than GB_OPERATION_TYPE_RESPONSE
for the name of the flag used to distiguish between request and
response messages.
Get rid of the redundant response flag definitions that are
associated with specific protocols.
Describe the symbolic values as "operation types" rather than
"message types" where they are defined. The message type for a
request is the same as the operation type; the message type for a
response is the operation type OR'd with GB_MESSAGE_TYPE_RESPONSE.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Thu, 7 May 2015 18:00:21 +0000 (13:00 -0500)]
greybus: battery: use feature tag rather than kernel version
Conditionally define a new symbol DRIVER_OWNS_PSY_STRUCT, which is
set in "kernel_ver.h" based on on the kernel version. Use it to
distinguish code used for kernels that differ in whether a power
supply structure is owned by the driver, or by the power supply
core.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Thu, 7 May 2015 18:00:20 +0000 (13:00 -0500)]
greybus: battery: free struct on error in caller
When a battery connection is initialized, a gb_battery structure for
it is allocated in gb_battery_connection_init(). Currently that
function ends by calling init_and_register(); in the event an error
occurs, init_and_register() is responsible for freeing the allocated
gb_battery structure.
Make the code a bit better balanced by having the function that
allocates the structure be responsible for freeing it in case of
error.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Rob Herring [Tue, 5 May 2015 16:04:22 +0000 (11:04 -0500)]
greybus: es2: fix driver name collision with es1
Both ES1 and ES2 drivers cannot be loaded due to a driver name conflict.
Give ES2 driver the correct name.
Signed-off-by: Rob Herring <rob.herring@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Greg Kroah-Hartman [Fri, 1 May 2015 19:06:12 +0000 (21:06 +0200)]
greybus: protocol.h: fix up long lines in define_get_version()
No need to go past 80 characters for the define_get_version macro, so
fix up the indentation to not do so.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Greg Kroah-Hartman [Fri, 1 May 2015 19:05:50 +0000 (21:05 +0200)]
greybus: protocol.h: macros should not have a trailing ';'
Remove the trailing ';' character from the gb_protocol_driver() macro as
it's not needed and is bad coding style.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Greg Kroah-Hartman [Fri, 1 May 2015 19:05:29 +0000 (21:05 +0200)]
greybus: kernel_ver.h: add a blank line after a variable definition
checkpatch reminds us that a blank line should go after a variable
definition, so fix it up here.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Greg Kroah-Hartman [Fri, 1 May 2015 19:05:03 +0000 (21:05 +0200)]
greybus: kernel_ver.h: add a ' ' character to KERNEL_VERSION()
You should always put a space after a ',', so do it for the
KERNEL_VERSION() macro as well. This makes checkpatch.pl happy also.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Greg Kroah-Hartman [Fri, 1 May 2015 19:04:47 +0000 (21:04 +0200)]
greybus: kernel_ver.h: fix leading space coding style issues
When cutting and pasting some of the ATTR macros into kernel_ver.h, I
dropped the tabs. Fix this up and make checkpatch.pl happy.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Greg Kroah-Hartman [Fri, 1 May 2015 18:41:00 +0000 (20:41 +0200)]
greybus: battery: update for 4.1 power supply api changes
The 4.1-rc1 kernel changed the power supply apis such that the
structures are now owned by the power supply core, and not the
individual drivers. This broke the greybus battery driver, so update it
to support both the old and the new apis.
The API changes were such that I can't "hide" them in kernel_ver.h, but
rather the driver itself needs to have ugly #ifdefs in it. I tried to
keep it to a minimum, making a sub-function for initializing the power
supply device that is implemented differently for different kernel
versions.
When this is submitted upstream, or if we ever move our AP development
to 4.1 or greater, the support for older kernels can be removed.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Viresh Kumar [Tue, 28 Apr 2015 14:21:41 +0000 (19:51 +0530)]
greybus: Move id-field before bundle-field in CPort Descriptor.
Note that this also makes sure the id-field is naturally aligned in case
we ever were to remove the __packed attribute.
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Tue, 28 Apr 2015 14:21:40 +0000 (19:51 +0530)]
greybus: Explicitly add pad-bytes to manifest descriptors
Explicitly add pad-bytes to manifest descriptors to match their layout
in greybus specification.
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Tue, 28 Apr 2015 14:21:39 +0000 (19:51 +0530)]
greybus: Remove class descriptor
We carry this information as part of bundle descriptor now and this can
be removed.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Tue, 28 Apr 2015 14:21:38 +0000 (19:51 +0530)]
greybus: manifest: drop interface-version field
It is not required anymore. Drop it.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Tue, 28 Apr 2015 14:21:37 +0000 (19:51 +0530)]
greybus: manifest: Remove vendor, product and unique-id from interface descriptor
These should come from control protocol instead.
For now, initialize this statically with a FIXME to not forget it later.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Alex Elder [Fri, 17 Apr 2015 19:41:47 +0000 (14:41 -0500)]
greybus: bundle: use kstrdup() for state file
The kernfs code guarantees we'll get a NUL-terminated buffer.
Use kstrdup() rather than kzalloc() + memcpy() in state_store()
making it slightly clearer what we're doing. This has the added
benefit of guaranteeing that the stored string has no NUL character
inside it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Wed, 29 Apr 2015 05:32:08 +0000 (11:02 +0530)]
greybus: manifest: Warn if descriptor size > expected size
A descriptor passed to AP can be bigger than what AP expects, if
manifest's minor version is higher with same major number as the AP. As
it can have some extra data in descriptor.
But, if AP and manifest versions are identical, or if the AP's minor
version is greater than the manifest version, we should at least warn
(if not fail).
Doing this would require some changes to record the manifest version
somewhere reachable by identify_descriptor().
For now, just warn if descriptor is bigger than expected.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Tue, 28 Apr 2015 14:21:35 +0000 (19:51 +0530)]
greybus: manifest: Account for padding in string descriptor
String descriptors are padded towards the end to align them to 4 byte
boundaries. Take that into account while calculating expected size.
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Tue, 28 Apr 2015 14:21:34 +0000 (19:51 +0530)]
greybus: Explicitly mark structures as packed
These structures are already marked as __packed, as these are enclosed
within:
#pragma pack(push, 1)
#pragma pack(pop)
Lets mark them __packed explicitly.
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Tue, 28 Apr 2015 14:10:27 +0000 (19:40 +0530)]
greybus: endo: Rename endo's 'type' as 'id'
There can be three Endo types: mini, medium and large. And that's what
Endo 'type' should refer to.
But we have named the 16 bit number that uniquely represents a valid
endo, as its type. 'id' seems to be a more suitable name to that instead
of 'type'. Lets rename it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Viresh Kumar [Tue, 28 Apr 2015 14:10:26 +0000 (19:40 +0530)]
greybus: endo: Use a real endo id
0x0555 isn't a valid endo id, use a real one.
0x4755 should be the Endo id for the (medium) Spiral 2 prototype. Lets
use that.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Greg Kroah-Hartman [Mon, 13 Apr 2015 17:51:33 +0000 (19:51 +0200)]
greybus: MODULE_LICENSE cleanup
These are all GPLv2-only kernel modules, so properly set the correct
MODULE_LICENSE string to make static checkers happy.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Greg Kroah-Hartman [Mon, 13 Apr 2015 17:48:37 +0000 (19:48 +0200)]
greybus: bundle: add state sysfs file
A bundle has a state file, that is managed by the endo userspace
process. This file can be written to and any process that is polling on
the file will be woken up and can read the new value. It's a "cheap"
IPC for programs that are not allowed to do anything other than
read/write to kernel sysfs files.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Johan Hovold [Thu, 16 Apr 2015 07:53:59 +0000 (09:53 +0200)]
greybus: loopback: fix 64-bit divisions
The code uses 64-bit divisions, which should be avoided, and also
prevents the module from loading on 32-bit systems:
gb_loopback: Unknown symbol __aeabi_uldivmod (err 0)
Fix by using the kernel's 64-bit by 32-bit division implementation
do_div.
Compile tested only. I did not look very closely at the code itself.
Perhaps this could be worked around in some other way, but this silences
the linker warning and allows the module to be loaded.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Greg Kroah-Hartman [Fri, 10 Apr 2015 09:20:35 +0000 (11:20 +0200)]
greybus: gpbridge.h: remove BIT() define
It's up to other files to define this if it's not present, not this
file.
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Greg Kroah-Hartman [Fri, 10 Apr 2015 09:18:49 +0000 (11:18 +0200)]
greybus: gpbridge.h: whitespace cleanups
Replace #define<TAB> with #define<SPACE>.
Also move the #ifdef block to below the initial comment block, like
other .h files are.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
John Stultz [Thu, 9 Apr 2015 23:01:31 +0000 (16:01 -0700)]
greybus: Move briged phy structure definitions into gpbridge.h
In order to facilitate re-use of the gpio, i2c, pwm and i2s
structures, split them out of independent files and add
them into a shared gpbridge.h
This will be a prereq to sharing these headers w/ gbsim.
Cc: Alex Elder <alex.elder@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@google.com>
CC: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Greg Kroah-Hartman [Tue, 7 Apr 2015 18:28:13 +0000 (20:28 +0200)]
greybus: Documentation/sysfs-bus-greybus: document module sysfs files
This documents the module slot sysfs files "epm", "power_control", and
"present".
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Greg Kroah-Hartman [Tue, 7 Apr 2015 18:27:53 +0000 (20:27 +0200)]
greybus: Documentation/sysfs-bus-greybus: document the endo and SVC
This documents the endo device, and the SVC specific files that are
present in the sysfs device tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Greg Kroah-Hartman [Tue, 7 Apr 2015 18:27:36 +0000 (20:27 +0200)]
greybus: Documentation/sysfs-bus-greybus: update kernel version and date
The kernel is now on the 4.XX numbering scheme, and it's going to be a
while before we merge this code, so pick a date sometime in the future
to be safe.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Greg Kroah-Hartman [Tue, 7 Apr 2015 18:27:15 +0000 (20:27 +0200)]
greybus: endo: hook up endos into the device tree
This hooks up the endo, and modules, into the device tree. All modules
for a specific endo are created when the host device is initialized.
When an interface is registered, the correct module for it is found and
that module is used for the sysfs tree. When the interface is removed,
the reference on the module is dropped.
When the host device goes away, the whole endo and modules are removed
at once.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Greg Kroah-Hartman [Tue, 7 Apr 2015 18:26:53 +0000 (20:26 +0200)]
greybus: endo: add endo structures and logic
This adds endo.c and endo.h and provides functions to create an endo and
the initial 0x0555 set of modules.
But, it doesn't hook this logic up into the running code yet, that comes
next.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Greg Kroah-Hartman [Tue, 7 Apr 2015 18:26:30 +0000 (20:26 +0200)]
greybus: module.c: add attributes
This adds the attributes power_control and present to a module. It also
removes the unneeded module_id attribute, as that comes from the name of
the module itself.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Johan Hovold [Tue, 7 Apr 2015 09:27:21 +0000 (11:27 +0200)]
greybus: drop host-driver buffer headroom
Drop the host-driver buffer headroom that was used to transfer the cport
id on ES1 and ES2.
Rather than transferring additional bytes on the wire and having to deal
with buffer-alignment issues (e.g. requiring the headroom to be a
multiple of 8 bytes) simply drop the headroom functionality.
Host drivers are expected set up their transfer descriptors separately
from the data buffers and any intermediate drivers (e.g. for Greybus
over USB) can (ab)use the operation message pad bytes for now.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>