OSDN Git Service
David S. Miller [Mon, 16 Sep 2019 20:06:03 +0000 (22:06 +0200)]
Merge branch 'net-ena-implement-adaptive-interrupt-moderation-using-dim'
Arthur Kiyanovski says:
====================
net: ena: implement adaptive interrupt moderation using dim
In this patchset we replace our adaptive interrupt moderation
implementation with the dim library implementation.
The dim library showed great improvement in throughput, latency
and CPU usage in different scenarios on ARM CPUs.
This patchset also includes a few bug fixes to the parts of the
old implementation of adaptive interrupt moderation that were left.
Changes from V1 patchset:
Removed stray empty lines from patches 01/11, 09/11.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Arthur Kiyanovski [Mon, 16 Sep 2019 11:31:36 +0000 (14:31 +0300)]
net: ena: fix incorrect update of intr_delay_resolution
ena_dev->intr_moder_rx/tx_interval save the intervals received from the
user after dividing them by ena_dev->intr_delay_resolution. Therefore
when intr_delay_resolution changes, the code needs to first mutiply
intr_moder_rx/tx_interval by the previous intr_delay_resolution to get
the value originally given by the user, and only then divide it by the
new intr_delay_resolution.
Current code does not first multiply intr_moder_rx/tx_interval by the old
intr_delay_resolution. This commit fixes it.
Also initialize ena_dev->intr_delay_resolution to be 1.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arthur Kiyanovski [Mon, 16 Sep 2019 11:31:35 +0000 (14:31 +0300)]
net: ena: fix retrieval of nonadaptive interrupt moderation intervals
Nonadaptive interrupt moderation intervals are assigned the value set
by the user in ethtool -C divided by ena_dev->intr_delay_resolution.
Therefore when the user tries to get the nonadaptive interrupt moderation
intervals with ethtool -c the code needs to multiply the saved value
by ena_dev->intr_delay_resolution.
The current code erroneously divides instead of multiplying in ethtool -c.
This patch fixes this.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arthur Kiyanovski [Mon, 16 Sep 2019 11:31:34 +0000 (14:31 +0300)]
net: ena: fix update of interrupt moderation register
Current implementation always updates the interrupt register with
the smoothed_interval of the rx_ring. However this should be
done only in case of adaptive interrupt moderation. If non-adaptive
interrupt moderation is used, the non-adaptive interrupt moderation
interval should be used. This commit fixes that.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arthur Kiyanovski [Mon, 16 Sep 2019 11:31:33 +0000 (14:31 +0300)]
net: ena: remove all old adaptive rx interrupt moderation code from ena_com
Remove previous implementation of adaptive rx interrupt moderation
from ena_com files.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arthur Kiyanovski [Mon, 16 Sep 2019 11:31:32 +0000 (14:31 +0300)]
net: ena: remove ena_restore_ethtool_params() and relevant fields
Deleted unused 4 fields from struct ena_adapter and their only user
ena_restore_ethtool_params().
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arthur Kiyanovski [Mon, 16 Sep 2019 11:31:31 +0000 (14:31 +0300)]
net: ena: remove old adaptive interrupt moderation code from ena_netdev
1. Out of the fields {per_napi_bytes, per_napi_packets} in struct ena_ring,
only rx_ring->per_napi_packets are used to determine if napi did work
for dim.
This commit removes all other uses of these fields.
2. Remove ena_ring->moder_tbl_idx, which is not used by dim.
3. Remove all calls to ena_com_destroy_interrupt_moderation(), since all it
did was to destroy the interrupt moderation table, which is removed as
part of removing old interrupt moderation code.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arthur Kiyanovski [Mon, 16 Sep 2019 11:31:30 +0000 (14:31 +0300)]
net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*()
Remove code duplication in:
ena_com_update_nonadaptive_moderation_interval_tx()
ena_com_update_nonadaptive_moderation_interval_rx()
functions.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arthur Kiyanovski [Mon, 16 Sep 2019 11:31:29 +0000 (14:31 +0300)]
net: ena: enable the interrupt_moderation in driver_supported_features
Add driver_supported_features to host_host info which is a new API used to
communicate to the device which features are supported by the driver.
Add the interrupt_moderation bit to host_info->driver_supported_features
and enable it to signal the device that this driver supports interrupt
moderation properly.
Reserved bits are for features implemented in the future
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arthur Kiyanovski [Mon, 16 Sep 2019 11:31:28 +0000 (14:31 +0300)]
net: ena: reimplement set/get_coalesce()
1. Remove old adaptive interrupt moderation code from set/get_coalesce()
2. Add ena_update_rx_rings_intr_moderation() function for updating
nonadaptive interrupt moderation intervals similarly to
ena_update_tx_rings_intr_moderation().
3. Remove checks of multiple unsupported received interrupt coalescing
parameters. This makes code cleaner and cancels the need to update
it every time a new coalescing parameter is invented.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arthur Kiyanovski [Mon, 16 Sep 2019 11:31:27 +0000 (14:31 +0300)]
net: ena: switch to dim algorithm for rx adaptive interrupt moderation
Use the dim library for the rx adaptive interrupt moderation implementation
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arthur Kiyanovski [Mon, 16 Sep 2019 11:31:26 +0000 (14:31 +0300)]
net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it
Add intr_moder_rx_interval to struct ena_com_dev and use it as the
location where the interrupt moderation rx interval is saved, instead
of the interrupt moderation table.
This is done as a first step before removing the old interrupt moderation
code.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 Sep 2019 20:02:45 +0000 (22:02 +0200)]
Merge branch 'ethtool-implement-Energy-Detect-Powerdown-support-via-phy-tunable'
Alexandru Ardelean says:
====================
ethtool: implement Energy Detect Powerdown support via phy-tunable
This changeset proposes a new control for PHY tunable to control Energy
Detect Power Down.
The `phy_tunable_id` has been named `ETHTOOL_PHY_EDPD` since it looks like
this feature is common across other PHYs (like EEE), and defining
`ETHTOOL_PHY_ENERGY_DETECT_POWER_DOWN` seems too long.
The way EDPD works, is that the RX block is put to a lower power mode,
except for link-pulse detection circuits. The TX block is also put to low
power mode, but the PHY wakes-up periodically to send link pulses, to avoid
lock-ups in case the other side is also in EDPD mode.
Currently, there are 2 PHY drivers that look like they could use this new
PHY tunable feature: the `adin` && `micrel` PHYs.
This series updates only the `adin` PHY driver to support this new feature,
as this chip has been tested. A change for `micrel` can be proposed after a
discussion of the PHY-tunable API is resolved.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandru Ardelean [Mon, 16 Sep 2019 07:35:26 +0000 (10:35 +0300)]
net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
This driver becomes the first user of the kernel's `ETHTOOL_PHY_EDPD`
phy-tunable feature.
EDPD is also enabled by default on PHY config_init, but can be disabled via
the phy-tunable control.
When enabling EDPD, it's also a good idea (for the ADIN PHYs) to enable TX
periodic pulses, so that in case the other PHY is also on EDPD mode, there
is no lock-up situation where both sides are waiting for the other to
transmit.
Via the phy-tunable control, TX pulses can be disabled if specifying 0
`tx-interval` via ethtool.
The ADIN PHY supports only fixed 1 second intervals; they cannot be
configured. That is why the acceptable values are 1,
ETHTOOL_PHY_EDPD_DFLT_TX_MSECS and ETHTOOL_PHY_EDPD_NO_TX (which disables
TX pulses).
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandru Ardelean [Mon, 16 Sep 2019 07:35:25 +0000 (10:35 +0300)]
ethtool: implement Energy Detect Powerdown support via phy-tunable
The `phy_tunable_id` has been named `ETHTOOL_PHY_EDPD` since it looks like
this feature is common across other PHYs (like EEE), and defining
`ETHTOOL_PHY_ENERGY_DETECT_POWER_DOWN` seems too long.
The way EDPD works, is that the RX block is put to a lower power mode,
except for link-pulse detection circuits. The TX block is also put to low
power mode, but the PHY wakes-up periodically to send link pulses, to avoid
lock-ups in case the other side is also in EDPD mode.
Currently, there are 2 PHY drivers that look like they could use this new
PHY tunable feature: the `adin` && `micrel` PHYs.
The ADIN's datasheet mentions that TX pulses are at intervals of 1 second
default each, and they can be disabled. For the Micrel KSZ9031 PHY, the
datasheet does not mention whether they can be disabled, but mentions that
they can modified.
The way this change is structured, is similar to the PHY tunable downshift
control:
* a `ETHTOOL_PHY_EDPD_DFLT_TX_MSECS` value is exposed to cover a default
TX interval; some PHYs could specify a certain value that makes sense
* `ETHTOOL_PHY_EDPD_NO_TX` would disable TX when EDPD is enabled
* `ETHTOOL_PHY_EDPD_DISABLE` will disable EDPD
As noted by the `ETHTOOL_PHY_EDPD_DFLT_TX_MSECS` the interval unit is 1
millisecond, which should cover a reasonable range of intervals:
- from 1 millisecond, which does not sound like much of a power-saver
- to ~65 seconds which is quite a lot to wait for a link to come up when
plugging a cable
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Markus Elfring [Sun, 15 Sep 2019 17:21:05 +0000 (19:21 +0200)]
s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb”
The dev_kfree_skb() function performs also input parameter validation.
Thus the test around the shown calls is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 Sep 2019 19:39:27 +0000 (21:39 +0200)]
Merge branch 'drop_monitor-Better-sanitize-notified-packets'
Ido Schimmel says:
====================
drop_monitor: Better sanitize notified packets
When working in 'packet' mode, drop monitor generates a notification
with a potentially truncated payload of the dropped packet. The payload
is copied from the MAC header, but I forgot to check that the MAC header
was set, so do it now.
Patch #1 sets the offsets to the various protocol layers in netdevsim,
so that it will continue to work after the MAC header check is added to
drop monitor in patch #2.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 15 Sep 2019 06:46:36 +0000 (09:46 +0300)]
drop_monitor: Better sanitize notified packets
When working in 'packet' mode, drop monitor generates a notification
with a potentially truncated payload of the dropped packet. The payload
is copied from the MAC header, but I forgot to check that the MAC header
was set, so do it now.
Fixes:
ca30707dee2b ("drop_monitor: Add packet alert mode")
Fixes:
5e58109b1ea4 ("drop_monitor: Add support for packet alert mode for hardware drops")
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 15 Sep 2019 06:46:35 +0000 (09:46 +0300)]
netdevsim: Set offsets to various protocol layers
The driver periodically generates "trapped" UDP packets that it then
passes on to devlink. Set the offsets to the various protocol layers.
This is a prerequisite to the next patch, where drop monitor is taught
to check that the offset to the MAC header was set.
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 Sep 2019 19:32:58 +0000 (21:32 +0200)]
Merge branch 'tc-taprio-offload-for-SJA1105-DSA'
Vladimir Oltean says:
====================
tc-taprio offload for SJA1105 DSA
This is the third attempt to submit the tc-taprio offload model for
inclusion in the networking tree. The sja1105 switch driver will provide
the first implementation of the offload. Only the bare minimum is added:
- The offload model and a DSA pass-through
- The hardware implementation
- The interaction with the netdev queues in the tagger code
- Documentation
What has been removed from previous attempts is support for
PTP-as-clocksource in sja1105, as well as configuring the traffic class
for management traffic. These will be added as soon as the offload
model is settled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 15 Sep 2019 02:00:03 +0000 (05:00 +0300)]
docs: net: dsa: sja1105: Add info about the Time-Aware Scheduler
While not an exhaustive usage tutorial, this describes the details
needed to build more complex scenarios.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 15 Sep 2019 02:00:02 +0000 (05:00 +0300)]
net: dsa: sja1105: Configure the Time-Aware Scheduler via tc-taprio offload
This qdisc offload is the closest thing to what the SJA1105 supports in
hardware for time-based egress shaping. The switch core really is built
around SAE AS6802/TTEthernet (a TTTech standard) but can be made to
operate similarly to IEEE 802.1Qbv with some constraints:
- The gate control list is a global list for all ports. There are 8
execution threads that iterate through this global list in parallel.
I don't know why 8, there are only 4 front-panel ports.
- Care must be taken by the user to make sure that two execution threads
never get to execute a GCL entry simultaneously. I created a O(n^4)
checker for this hardware limitation, prior to accepting a taprio
offload configuration as valid.
- The spec says that if a GCL entry's interval is shorter than the frame
length, you shouldn't send it (and end up in head-of-line blocking).
Well, this switch does anyway.
- The switch has no concept of ADMIN and OPER configurations. Because
it's so simple, the TAS settings are loaded through the static config
tables interface, so there isn't even place for any discussion about
'graceful switchover between ADMIN and OPER'. You just reset the
switch and upload a new OPER config.
- The switch accepts multiple time sources for the gate events. Right
now I am using the standalone clock source as opposed to PTP. So the
base time parameter doesn't really do much. Support for the PTP clock
source will be added in a future series.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 15 Sep 2019 02:00:01 +0000 (05:00 +0300)]
net: dsa: sja1105: Advertise the 8 TX queues
This is a preparation patch for the tc-taprio offload (and potentially
for other future offloads such as tc-mqprio).
Instead of looking directly at skb->priority during xmit, let's get the
netdev queue and the queue-to-traffic-class mapping, and put the
resulting traffic class into the dsa_8021q PCP field. The switch is
configured with a 1-to-1 PCP-to-ingress-queue-to-egress-queue mapping
(see vlan_pmap in sja1105_main.c), so the effect is that we can inject
into a front-panel's egress traffic class through VLAN tagging from
Linux, completely transparently.
Unfortunately the switch doesn't look at the VLAN PCP in the case of
management traffic to/from the CPU (link-local frames at
01-80-C2-xx-xx-xx or 01-1B-19-xx-xx-xx) so we can't alter the
transmission queue of this type of traffic on a frame-by-frame basis. It
is only selected through the "hostprio" setting which ATM is harcoded in
the driver to 7.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 15 Sep 2019 02:00:00 +0000 (05:00 +0300)]
net: dsa: sja1105: Add static config tables for scheduling
In order to support tc-taprio offload, the TTEthernet egress scheduling
core registers must be made visible through the static interface.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 15 Sep 2019 01:59:59 +0000 (04:59 +0300)]
net: dsa: Pass ndo_setup_tc slave callback to drivers
DSA currently handles shared block filters (for the classifier-action
qdisc) in the core due to what I believe are simply pragmatic reasons -
hiding the complexity from drivers and offerring a simple API for port
mirroring.
Extend the dsa_slave_setup_tc function by passing all other qdisc
offloads to the driver layer, where the driver may choose what it
implements and how. DSA is simply a pass-through in this case.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vinicius Costa Gomes [Sun, 15 Sep 2019 01:59:58 +0000 (04:59 +0300)]
taprio: Add support for hardware offloading
This allows taprio to offload the schedule enforcement to capable
network cards, resulting in more precise windows and less CPU usage.
The gate mask acts on traffic classes (groups of queues of same
priority), as specified in IEEE 802.1Q-2018, and following the existing
taprio and mqprio semantics.
It is up to the driver to perform conversion between tc and individual
netdev queues if for some reason it needs to make that distinction.
Full offload is requested from the network interface by specifying
"flags 2" in the tc qdisc creation command, which in turn corresponds to
the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit.
The important detail here is the clockid which is implicitly /dev/ptpN
for full offload, and hence not configurable.
A reference counting API is added to support the use case where Ethernet
drivers need to keep the taprio offload structure locally (i.e. they are
a multi-port switch driver, and configuring a port depends on the
settings of other ports as well). The refcount_t variable is kept in a
private structure (__tc_taprio_qopt_offload) and not exposed to drivers.
In the future, the private structure might also be expanded with a
backpointer to taprio_sched *q, to implement the notification system
described in the patch (of when admin became oper, or an error occurred,
etc, so the offload can be monitored with 'tc qdisc show').
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Sat, 14 Sep 2019 09:44:04 +0000 (10:44 +0100)]
net: phylink: clarify where phylink should be used
Update the phylink documentation to make it clear that phylink is
designed to be used on the MAC facing side of the link, rather than
between a SFP and PHY.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 Sep 2019 14:44:28 +0000 (16:44 +0200)]
Merge branch 'bnxt_en-error-recovery-follow-up-patches'
Michael Chan says:
====================
bnxt_en: error recovery follow-up patches.
A follow-up patchset for the recently added health and error recovery
feature. The first fix is to prevent .ndo_set_rx_mode() from proceeding
when reset is in progress. The 2nd fix is for the firmware coredump
command. The 3rd and 4th patches update the error recovery process
slightly to add a state that polls and waits for the firmware to be down.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Sat, 14 Sep 2019 04:01:41 +0000 (00:01 -0400)]
bnxt_en: Add a new BNXT_FW_RESET_STATE_POLL_FW_DOWN state.
This new state is required when firmware indicates that the error
recovery process requires polling for firmware state to be completely
down before initiating reset. For example, firmware may take some
time to collect the crash dump before it is down and ready to be
reset.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 14 Sep 2019 04:01:40 +0000 (00:01 -0400)]
bnxt_en: Update firmware interface spec. to 1.10.0.100.
Some error recovery updates to the spec., among other minor changes.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Sat, 14 Sep 2019 04:01:39 +0000 (00:01 -0400)]
bnxt_en: Increase timeout for HWRM_DBG_COREDUMP_XX commands
Firmware coredump messages take much longer than standard messages,
so increase the timeout accordingly.
Fixes:
6c5657d085ae ("bnxt_en: Add support for ethtool get dump.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 14 Sep 2019 04:01:38 +0000 (00:01 -0400)]
bnxt_en: Don't proceed in .ndo_set_rx_mode() when device is not in open state.
Check the BNXT_STATE_OPEN flag instead of netif_running() in
bnxt_set_rx_mode(). If the driver is going through any reset, such
as firmware reset or even TX timeout, it may not be ready to set the RX
mode and may crash. The new rx mode settings will be picked up when
the device is opened again later.
Fixes:
230d1f0de754 ("bnxt_en: Handle firmware reset.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Higdon [Fri, 13 Sep 2019 23:23:35 +0000 (23:23 +0000)]
tcp: Add snd_wnd to TCP_INFO
Neal Cardwell mentioned that snd_wnd would be useful for diagnosing TCP
performance problems --
> (1) Usually when we're diagnosing TCP performance problems, we do so
> from the sender, since the sender makes most of the
> performance-critical decisions (cwnd, pacing, TSO size, TSQ, etc).
> From the sender-side the thing that would be most useful is to see
> tp->snd_wnd, the receive window that the receiver has advertised to
> the sender.
This serves the purpose of adding an additional __u32 to avoid the
would-be hole caused by the addition of the tcpi_rcvi_ooopack field.
Signed-off-by: Thomas Higdon <tph@fb.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Higdon [Fri, 13 Sep 2019 23:23:34 +0000 (23:23 +0000)]
tcp: Add TCP_INFO counter for packets received out-of-order
For receive-heavy cases on the server-side, we want to track the
connection quality for individual client IPs. This counter, similar to
the existing system-wide TCPOFOQueue counter in /proc/net/netstat,
tracks out-of-order packet reception. By providing this counter in
TCP_INFO, it will allow understanding to what degree receive-heavy
sockets are experiencing out-of-order delivery and packet drops
indicating congestion.
Please note that this is similar to the counter in NetBSD TCP_INFO, and
has the same name.
Also note that we avoid increasing the size of the tcp_sock struct by
taking advantage of a hole.
Signed-off-by: Thomas Higdon <tph@fb.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Torokhov [Fri, 13 Sep 2019 22:55:47 +0000 (15:55 -0700)]
net: mdio: switch to using gpiod_get_optional()
The MDIO device reset line is optional and now that gpiod_get_optional()
returns proper value when GPIO support is compiled out, there is no
reason to use fwnode_get_named_gpiod() that I plan to hide away.
Let's switch to using more standard gpiod_get_optional() and
gpiod_set_consumer_name() to keep the nice "PHY reset" label.
Also there is no reason to only try to fetch the reset GPIO when we have
OF node, gpiolib can fetch GPIO data from firmwares as well.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 Sep 2019 14:02:03 +0000 (16:02 +0200)]
Merge git://git./linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-09-16
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Now that initial BPF backend for gcc has been merged upstream, enable
BPF kselftest suite for bpf-gcc. Also fix a BE issue with access to
bpf_sysctl.file_pos, from Ilya.
2) Follow-up fix for link-vmlinux.sh to remove bash-specific extensions
related to recent work on exposing BTF info through sysfs, from Andrii.
3) AF_XDP zero copy fixes for i40e and ixgbe driver which caused umem
headroom to be added twice, from Ciara.
4) Refactoring work to convert sock opt tests into test_progs framework
in BPF kselftests, from Stanislav.
5) Fix a general protection fault in dev_map_hash_update_elem(), from Toke.
6) Cleanup to use BPF_PROG_RUN() macro in KCM, from Sami.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilya Leoshkevich [Fri, 16 Aug 2019 10:53:00 +0000 (12:53 +0200)]
bpf: fix accessing bpf_sysctl.file_pos on s390
"ctx:file_pos sysctl:read write ok" fails on s390 with "Read value !=
nux". This is because verifier rewrites a complete 32-bit
bpf_sysctl.file_pos update to a partial update of the first 32 bits of
64-bit *bpf_sysctl_kern.ppos, which is not correct on big-endian
systems.
Fix by using an offset on big-endian systems.
Ditto for bpf_sysctl.file_pos reads. Currently the test does not detect
a problem there, since it expects to see 0, which it gets with high
probability in error cases, so change it to seek to offset 3 and expect
3 in bpf_sysctl.file_pos.
Fixes:
e1550bfe0de4 ("bpf: Add file_pos field to bpf_sysctl ctx")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20190816105300.49035-1-iii@linux.ibm.com/
Toke Høiland-Jørgensen [Sun, 8 Sep 2019 08:20:16 +0000 (09:20 +0100)]
xdp: Fix race in dev_map_hash_update_elem() when replacing element
syzbot found a crash in dev_map_hash_update_elem(), when replacing an
element with a new one. Jesper correctly identified the cause of the crash
as a race condition between the initial lookup in the map (which is done
before taking the lock), and the removal of the old element.
Rather than just add a second lookup into the hashmap after taking the
lock, fix this by reworking the function logic to take the lock before the
initial lookup.
Fixes:
6f9d451ab1a3 ("xdp: Add devmap_hash map type for looking up devices by hashed index")
Reported-and-tested-by: syzbot+4e7a85b1432052e8d6f8@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann [Mon, 16 Sep 2019 07:35:10 +0000 (09:35 +0200)]
Merge branch 'bpf-af-xdp-unaligned-fixes'
Ciara Loftus says:
====================
This patch set contains some fixes for AF_XDP zero copy in the i40e and
ixgbe drivers as well as a fix for the 'xdpsock' sample application when
running in unaligned mode.
Patches 1 and 2 fix a regression for the i40e and ixgbe drivers which
caused the umem headroom to be added to the xdp handle twice, resulting in
an incorrect value being received by the user for the case where the umem
headroom is non-zero.
Patch 3 fixes an issue with the xdpsock sample application whereby the
start of the tx packet data (offset) was not being set correctly when the
application was being run in unaligned mode.
This patch set has been applied against commit
a2c11b034142 ("kcm: use
BPF_PROG_RUN")
====================
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Ciara Loftus [Fri, 13 Sep 2019 10:39:48 +0000 (10:39 +0000)]
samples/bpf: fix xdpsock l2fwd tx for unaligned mode
Preserve the offset of the address of the received descriptor, and include
it in the address set for the tx descriptor, so the kernel can correctly
locate the start of the packet data.
Fixes:
03895e63ff97 ("samples/bpf: add buffer recycling for unaligned chunks to xdpsock")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Ciara Loftus [Fri, 13 Sep 2019 10:39:47 +0000 (10:39 +0000)]
ixgbe: fix xdp handle calculations
Commit
7cbbf9f1fa23 ("ixgbe: fix xdp handle calculations") reintroduced
the addition of the umem headroom to the xdp handle in the ixgbe_zca_free,
ixgbe_alloc_buffer_slow_zc and ixgbe_alloc_buffer_zc functions. However,
the headroom is already added to the handle in the function
ixgbe_run_xdp_zc. This commit removes the latter addition and fixes the
case where the headroom is non-zero.
Fixes:
7cbbf9f1fa23 ("ixgbe: fix xdp handle calculations")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Ciara Loftus [Fri, 13 Sep 2019 10:39:46 +0000 (10:39 +0000)]
i40e: fix xdp handle calculations
Commit
4c5d9a7fa149 ("i40e: fix xdp handle calculations") reintroduced
the addition of the umem headroom to the xdp handle in the i40e_zca_free,
i40e_alloc_buffer_slow_zc and i40e_alloc_buffer_zc functions. However,
the headroom is already added to the handle in the function i40_run_xdp_zc.
This commit removes the latter addition and fixes the case where the
headroom is non-zero.
Fixes:
4c5d9a7fa149 ("i40e: fix xdp handle calculations")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Ilya Leoshkevich [Thu, 12 Sep 2019 16:05:43 +0000 (18:05 +0200)]
selftests/bpf: add bpf-gcc support
Now that binutils and gcc support for BPF is upstream, make use of it in
BPF selftests using alu32-like approach. Share as much as possible of
CFLAGS calculation with clang.
Fixes only obvious issues, leaving more complex ones for later:
- Use gcc-provided bpf-helpers.h instead of manually defining the
helpers, change bpf_helpers.h include guard to avoid conflict.
- Include <linux/stddef.h> for __always_inline.
- Add $(OUTPUT)/../usr/include to include path in order to use local
kernel headers instead of system kernel headers when building with O=.
In order to activate the bpf-gcc support, one needs to configure
binutils and gcc with --target=bpf and make them available in $PATH. In
particular, gcc must be installed as `bpf-gcc`, which is the default.
Right now with binutils
25a2915e8dba and gcc r275589 only a handful of
tests work:
# ./test_progs_bpf_gcc
# Summary: 7/39 PASSED, 1 SKIPPED, 98 FAILED
The reason for those failures are as follows:
- Build errors:
- `error: too many function arguments for eBPF` for __always_inline
functions read_str_var and read_map_var - must be inlining issue,
and for process_l3_headers_v6, which relies on optimizing away
function arguments.
- `error: indirect call in function, which are not supported by eBPF`
where there are no obvious indirect calls in the source calls, e.g.
in __encap_ipip_none.
- `error: field 'lock' has incomplete type` for fields of `struct
bpf_spin_lock` type - bpf_spin_lock is re#defined by bpf-helpers.h,
so its usage is sensitive to order of #includes.
- `error: eBPF stack limit exceeded` in sysctl_tcp_mem.
- Load errors:
- Missing object files due to above build errors.
- `libbpf: failed to create map (name: 'test_ver.bss')`.
- `libbpf: object file doesn't contain bpf program`.
- `libbpf: Program '.text' contains unrecognized relo data pointing to
section 0`.
- `libbpf: BTF is required, but is missing or corrupted` - no BTF
support in gcc yet.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Alexandru Ardelean [Mon, 16 Sep 2019 07:04:00 +0000 (10:04 +0300)]
net: stmmac: socfpga: re-use the `interface` parameter from platform data
The socfpga sub-driver defines an `interface` field in the `socfpga_dwmac`
struct and parses it on init.
The shared `stmmac_probe_config_dt()` function also parses this from the
device-tree and makes it available on the returned `plat_data` (which is
the same data available via `netdev_priv()`).
All that's needed now is to dig that information out, via some
`dev_get_drvdata()` && `netdev_priv()` calls and re-use it.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 Sep 2019 07:18:03 +0000 (09:18 +0200)]
Merge branch 'More-fixes-for-unlocked-cls-hardware-offload-API-refactoring'
Vlad Buslov says:
====================
More fixes for unlocked cls hardware offload API refactoring
Two fixes for my "Refactor cls hardware offload API to support
rtnl-independent drivers" series and refactoring patch that implements
infrastructure necessary for the fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Fri, 13 Sep 2019 15:28:41 +0000 (18:28 +0300)]
net: sched: use get_dev() action API in flow_action infra
When filling in hardware intermediate representation tc_setup_flow_action()
directly obtains, checks and takes reference to dev used by mirred action,
instead of using act->ops->get_dev() API created specifically for this
purpose. In order to remove code duplication, refactor flow_action infra to
use action API when obtaining mirred action target dev. Extend get_dev()
with additional argument that is used to provide dev destructor to the
user.
Fixes:
5a6ff4b13d59 ("net: sched: take reference to action dev before calling offloads")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Fri, 13 Sep 2019 15:28:40 +0000 (18:28 +0300)]
net: sched: take reference to psample group in flow_action infra
With recent patch set that removed rtnl lock dependency from cls hardware
offload API rtnl lock is only taken when reading action data and can be
released after action-specific data is parsed into intermediate
representation. However, sample action psample group is passed by pointer
without obtaining reference to it first, which makes it possible to
concurrently overwrite the action and deallocate object pointed by
psample_group pointer after rtnl lock is released but before driver
finished using the pointer.
To prevent such race condition, obtain reference to psample group while it
is used by flow_action infra. Extend psample API with function
psample_group_take() that increments psample group reference counter.
Extend struct tc_action_ops with new get_psample_group() API. Implement the
API for action sample using psample_group_take() and already existing
psample_group_put() as a destructor. Use it in tc_setup_flow_action() to
take reference to psample group pointed to by entry->sample.psample_group
and release it in tc_cleanup_flow_action().
Disable bh when taking psample_groups_lock. The lock is now taken while
holding action tcf_lock that is used by data path and requires bh to be
disabled, so doing the same for psample_groups_lock is necessary to
preserve SOFTIRQ-irq-safety.
Fixes:
918190f50eb6 ("net: sched: flower: don't take rtnl lock for cls hw offloads API")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Fri, 13 Sep 2019 15:28:39 +0000 (18:28 +0300)]
net: sched: extend flow_action_entry with destructor
Generalize flow_action_entry cleanup by extending the structure with
pointer to destructor function. Set the destructor in
tc_setup_flow_action(). Refactor tc_cleanup_flow_action() to call
entry->destructor() instead of using switch that dispatches by entry->id
and manually executes cleanup.
This refactoring is necessary for following patches in this series that
require destructor to use tc_action->ops callbacks that can't be easily
obtained in tc_cleanup_flow_action().
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 13 Sep 2019 13:28:17 +0000 (16:28 +0300)]
net/wan: dscc4: remove broken dscc4 driver
Using static analysis, I discovered that the "dpriv->pci_priv->pdev"
pointer is always NULL. This pointer was supposed to be initialized
during probe and is essential for the driver to work. It would be easy
to add a "ppriv->pdev = pdev;" to dscc4_found1() but this driver has
been broken since before we started using git and no one has complained
so probably we should just remove it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Fri, 13 Sep 2019 09:07:59 +0000 (10:07 +0100)]
qed: fix spelling mistake "fullill" -> "fulfill"
There is a spelling mistake in a DP_VERBOSE debug message. Fix it.
(Using American English spelling as this is the most common way
to spell this in the kernel).
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 13 Sep 2019 03:28:39 +0000 (20:28 -0700)]
net: dsa: b53: Add support for port_egress_floods callback
Add support for configuring the per-port egress flooding control for
both Unicast and Multicast traffic.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 15 Sep 2019 12:17:27 +0000 (14:17 +0200)]
Merge git://git./linux/kernel/git/netdev/net
Minor overlapping changes in the btusb and ixgbe drivers.
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 14 Sep 2019 23:07:40 +0000 (16:07 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"The main change here is a revert of reverts. We recently simplified
some code that was thought unnecessary; however, since then KVM has
grown quite a few cond_resched()s and for that reason the simplified
code is prone to livelocks---one CPUs tries to empty a list of guest
page tables while the others keep adding to them. This adds back the
generation-based zapping of guest page tables, which was not
unnecessary after all.
On top of this, there is a fix for a kernel memory leak and a couple
of s390 fixlets as well"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot
KVM: x86: work around leak of uninitialized stack contents
KVM: nVMX: handle page fault in vmread
KVM: s390: Do not leak kernel stack data in the KVM_S390_INTERRUPT ioctl
KVM: s390: kvm_s390_vm_start_migration: check dirty_bitmap before using it as target for memset()
Linus Torvalds [Sat, 14 Sep 2019 23:02:49 +0000 (16:02 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio fix from Michael Tsirkin:
"A last minute revert
The 32-bit build got broken by the latest defence in depth patch.
Revert and we'll try again in the next cycle"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
Revert "vhost: block speculation of translated descriptors"
Linus Torvalds [Sat, 14 Sep 2019 22:58:02 +0000 (15:58 -0700)]
Merge tag 'riscv/for-v5.3' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fix from Paul Walmsley:
"Last week, Palmer and I learned that there was an error in the RISC-V
kernel image header format that could make it less compatible with the
ARM64 kernel image header format. I had missed this error during my
original reviews of the patch.
The kernel image header format is an interface that impacts
bootloaders, QEMU, and other user tools. Those packages must be
updated to align with whatever is merged in the kernel. We would like
to avoid proliferating these image formats by keeping the RISC-V
header as close as possible to the existing ARM64 header. Since the
arch/riscv patch that adds support for the image header was merged
with our v5.3-rc1 pull request as commit
0f327f2aaad6a ("RISC-V: Add
an Image header that boot loader can parse."), we think it wise to try
to fix this error before v5.3 is released.
The fix itself should be backwards-compatible with any project that
has already merged support for premature versions of this interface.
It primarily involves ensuring that the RISC-V image header has
something useful in the same field as the ARM64 image header"
* tag 'riscv/for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: modify the Image header to improve compatibility with the ARM64 header
Michael S. Tsirkin [Sat, 14 Sep 2019 19:21:51 +0000 (15:21 -0400)]
Revert "vhost: block speculation of translated descriptors"
This reverts commit
a89db445fbd7f1f8457b03759aa7343fa530ef6b.
I was hasty to include this patch, and it breaks the build on 32 bit.
Defence in depth is good but let's do it properly.
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Linus Torvalds [Sat, 14 Sep 2019 19:20:38 +0000 (12:20 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Don't corrupt xfrm_interface parms before validation, from Nicolas
Dichtel.
2) Revert use of usb-wakeup in btusb, from Mario Limonciello.
3) Block ipv6 packets in bridge netfilter if ipv6 is disabled, from
Leonardo Bras.
4) IPS_OFFLOAD not honored in ctnetlink, from Pablo Neira Ayuso.
5) Missing ULP check in sock_map, from John Fastabend.
6) Fix receive statistic handling in forcedeth, from Zhu Yanjun.
7) Fix length of SKB allocated in 6pack driver, from Christophe
JAILLET.
8) ip6_route_info_create() returns an error pointer, not NULL. From
Maciej Żenczykowski.
9) Only add RDS sock to the hashes after rs_transport is set, from
Ka-Cheong Poon.
10) Don't double clean TX descriptors in ixgbe, from Ilya Maximets.
11) Presence of transmit IPSEC offload in an SKB is not tested for
correctly in ixgbe and ixgbevf. From Steffen Klassert and Jeff
Kirsher.
12) Need rcu_barrier() when register_netdevice() takes one of the
notifier based failure paths, from Subash Abhinov Kasiviswanathan.
13) Fix leak in sctp_do_bind(), from Mao Wenan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
cdc_ether: fix rndis support for Mediatek based smartphones
sctp: destroy bucket if failed to bind addr
sctp: remove redundant assignment when call sctp_get_port_local
sctp: change return type of sctp_get_port_local
ixgbevf: Fix secpath usage for IPsec Tx offload
sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()'
ixgbe: Fix secpath usage for IPsec TX offload.
net: qrtr: fix memort leak in qrtr_tun_write_iter
net: Fix null de-reference of device refcount
ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()'
tun: fix use-after-free when register netdev failed
tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR
ixgbe: fix double clean of Tx descriptors with xdp
ixgbe: Prevent u8 wrapping of ITR value to something less than 10us
mlx4: fix spelling mistake "veify" -> "verify"
net: hns3: fix spelling mistake "undeflow" -> "underflow"
net: lmc: fix spelling mistake "runnin" -> "running"
NFC: st95hf: fix spelling mistake "receieve" -> "receive"
net/rds: An rds_sock is added too early to the hash table
mac80211: Do not send Layer 2 Update frame before authorization
...
Linus Torvalds [Sat, 14 Sep 2019 19:08:19 +0000 (12:08 -0700)]
Merge tag 'mmc-v5.3-rc8' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- tmio: Fixup runtime PM management during probe and remove
- sdhci-pci-o2micro: Fix eMMC initialization for an AMD SoC
- bcm2835: Prevent lockups when terminating work
* tag 'mmc-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: tmio: Fixup runtime PM management during remove
mmc: tmio: Fixup runtime PM management during probe
Revert "mmc: tmio: move runtime PM enablement to the driver implementations"
Revert "mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller"
Revert "mmc: bcm2835: Terminate timeout work synchronously"
Linus Torvalds [Sat, 14 Sep 2019 18:54:57 +0000 (11:54 -0700)]
Merge tag 'drm-fixes-2019-09-13' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"From the maintainer summit, just some last minute fixes for final:
lima:
- fix gem_wait ioctl
core:
- constify modes list
i915:
- DP MST high color depth regression
- GPU hangs on vulkan compute workloads"
* tag 'drm-fixes-2019-09-13' of git://anongit.freedesktop.org/drm/drm:
drm/lima: fix lima_gem_wait() return value
drm/i915: Restore relaxed padding (OCL_OOB_SUPPRES_ENABLE) for skl+
drm/i915: Limit MST to <= 8bpc once again
drm/modes: Make the whitelist more const
David S. Miller [Sat, 14 Sep 2019 13:08:18 +0000 (15:08 +0200)]
Merge tag 'wireless-drivers-next-for-davem-2019-09-14' of git://git./linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 5.4
Last set of patches for 5.4. wil6210 and rtw88 being most active this
time, but ath9k also having a new module to load devices without
EEPROM.
Major changes:
wil6210
* add support for Enhanced Directional Multi-Gigabit (EDMG) channels 9-11
* add debugfs file to show PCM ring content
* report boottime_ns in scan results
ath9k
* add a separate loader for AR92XX (and older) pci(e) without eeprom
brcmfmac
* use the same wiphy after PCIe reset to not confuse the user space
rtw88
* enable interrupt migration
* enable AMSDU in AMPDU aggregation
* report RX power for each antenna
* enable to DPK and IQK calibration methods to improve performance
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Bonzini [Sat, 14 Sep 2019 07:25:30 +0000 (09:25 +0200)]
Merge tag 'kvm-s390-master-5.3-1' of git://git./linux/kernel/git/kvms390/linux into kvm-master
KVM: s390: Fixes for 5.3
- prevent a user triggerable oops in the migration code
- do not leak kernel stack content
Sean Christopherson [Fri, 13 Sep 2019 02:46:02 +0000 (19:46 -0700)]
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot
James Harvey reported a livelock that was introduced by commit
d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when
removing a memslot"").
The livelock occurs because kvm_mmu_zap_all() as it exists today will
voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs
to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck
in an infinite loop as it can never zap all pages before observing lock
contention or the need to reschedule. The equivalent of kvm_mmu_zap_all()
that was in use at the time of the reverted commit (
4e103134b8623, "KVM:
x86/mmu: Zap only the relevant pages when removing a memslot") employed
a fast invalidate mechanism and was not susceptible to the above livelock.
There are three ways to fix the livelock:
- Reverting the revert (commit
d012a06ab1d23) is not a viable option as
the revert is needed to fix a regression that occurs when the guest has
one or more assigned devices. It's unlikely we'll root cause the device
assignment regression soon enough to fix the regression timely.
- Remove the conditional reschedule from kvm_mmu_zap_all(). However, although
removing the reschedule would be a smaller code change, it's less safe
in the sense that the resulting kvm_mmu_zap_all() hasn't been used in
the wild for flushing memslots since the fast invalidate mechanism was
introduced by commit
6ca18b6950f8d ("KVM: x86: use the fast way to
invalidate all pages"), back in 2013.
- Reintroduce the fast invalidate mechanism and use it when zapping shadow
pages in response to a memslot being deleted/moved, which is what this
patch does.
For all intents and purposes, this is a revert of commit
ea145aacf4ae8
("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of
commit
7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate
all pages""), i.e. restores the behavior of commit
5304b8d37c2a5 ("KVM:
MMU: fast invalidate all pages") and commit
6ca18b6950f8d ("KVM: x86:
use the fast way to invalidate all pages") respectively.
Fixes:
d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"")
Reported-by: James Harvey <jamespharvey20@gmail.com>
Cc: Alex Willamson <alex.williamson@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fuqian Huang [Thu, 12 Sep 2019 04:18:17 +0000 (12:18 +0800)]
KVM: x86: work around leak of uninitialized stack contents
Emulation of VMPTRST can incorrectly inject a page fault
when passed an operand that points to an MMIO address.
The page fault will use uninitialized kernel stack memory
as the CR2 and error code.
The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR
exit to userspace; however, it is not an easy fix, so for now just ensure
that the error code and CR2 are zero.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Cc: stable@vger.kernel.org
[add comment]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 13 Sep 2019 22:26:27 +0000 (00:26 +0200)]
KVM: nVMX: handle page fault in vmread
The implementation of vmread to memory is still incomplete, as it
lacks the ability to do vmread to I/O memory just like vmptrst.
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paul Walmsley [Sat, 14 Sep 2019 01:35:50 +0000 (18:35 -0700)]
riscv: modify the Image header to improve compatibility with the ARM64 header
Part of the intention during the definition of the RISC-V kernel image
header was to lay the groundwork for a future merge with the ARM64
image header. One error during my original review was not noticing
that the RISC-V header's "magic" field was at a different size and
position than the ARM64's "magic" field. If the existing ARM64 Image
header parsing code were to attempt to parse an existing RISC-V kernel
image header format, it would see a magic number 0. This is
undesirable, since it's our intention to align as closely as possible
with the ARM64 header format. Another problem was that the original
"res3" field was not being initialized correctly to zero.
Address these issues by creating a 32-bit "magic2" field in the RISC-V
header which matches the ARM64 "magic" field. RISC-V binaries will
store "RSC\x05" in this field. The intention is that the use of the
existing 64-bit "magic" field in the RISC-V header will be deprecated
over time. Increment the minor version number of the file format to
indicate this change, and update the documentation accordingly. Fix
the assembler directives in head.S to ensure that reserved fields are
properly zero-initialized.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reported-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Atish Patra <atish.patra@wdc.com>
Cc: Karsten Merker <merker@debian.org>
Link: https://lore.kernel.org/linux-riscv/194c2f10c9806720623430dbf0cc59a965e50448.camel@wdc.com/T/#u
Link: https://lore.kernel.org/linux-riscv/mhng-755b14c4-8f35-4079-a7ff-e421fd1b02bc@palmer-si-x1e/T/#t
David S. Miller [Fri, 13 Sep 2019 20:11:14 +0000 (22:11 +0200)]
Merge branch 'devlink-move-reload-fail-indication-to-devlink-core-and-expose-to-user'
Jiri Pirko says:
====================
net: devlink: move reload fail indication to devlink core and expose to user
First two patches are dependencies of the last one. That moves devlink
reload failure indication to the devlink code, so the drivers do not
have to track it themselves. Currently it is only mlxsw, but I will send
a follow-up patchset that introduces this in netdevsim too.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 12 Sep 2019 08:49:46 +0000 (10:49 +0200)]
net: devlink: move reload fail indication to devlink core and expose to user
Currently the fact that devlink reload failed is stored in drivers.
Move this flag into devlink core. Also, expose it to the user.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 12 Sep 2019 08:49:45 +0000 (10:49 +0200)]
net: devlink: split reload op into two
In order to properly implement failure indication during reload,
split the reload op into two ops, one for down phase and one for
up phase.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 12 Sep 2019 08:49:44 +0000 (10:49 +0200)]
mlx4: Split restart_one into two functions
Split the function restart_one into two functions and separate teardown
and buildup.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjørn Mork [Thu, 12 Sep 2019 08:42:00 +0000 (10:42 +0200)]
cdc_ether: fix rndis support for Mediatek based smartphones
A Mediatek based smartphone owner reports problems with USB
tethering in Linux. The verbose USB listing shows a rndis_host
interface pair (e0/01/03 + 10/00/00), but the driver fails to
bind with
[ 355.960428] usb 1-4: bad CDC descriptors
The problem is a failsafe test intended to filter out ACM serial
functions using the same 02/02/ff class/subclass/protocol as RNDIS.
The serial functions are recognized by their non-zero bmCapabilities.
No RNDIS function with non-zero bmCapabilities were known at the time
this failsafe was added. But it turns out that some Wireless class
RNDIS functions are using the bmCapabilities field. These functions
are uniquely identified as RNDIS by their class/subclass/protocol, so
the failing test can safely be disabled. The same applies to the two
types of Misc class RNDIS functions.
Applying the failsafe to Communication class functions only retains
the original functionality, and fixes the problem for the Mediatek based
smartphone.
Tow examples of CDC functional descriptors with non-zero bmCapabilities
from Wireless class RNDIS functions are:
0e8d:000a Mediatek Crosscall Spider X5 3G Phone
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x0f
connection notifications
sends break
line coding and serial state
get/set/clear comm features
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
and
19d2:1023 ZTE K4201-z
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
CDC Union:
bMasterInterface 0
bSlaveInterface 1
The Mediatek example is believed to apply to most smartphones with
Mediatek firmware. The ZTE example is most likely also part of a larger
family of devices/firmwares.
Suggested-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 13 Sep 2019 20:06:20 +0000 (22:06 +0200)]
Merge branch 'sctp_do_bind-leak'
Mao Wenan says:
====================
fix memory leak for sctp_do_bind
First two patches are to do cleanup, remove redundant assignment,
and change return type of sctp_get_port_local.
Third patch is to fix memory leak for sctp_do_bind if failed
to bind address.
v2: add one patch to change return type of sctp_get_port_local.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mao Wenan [Thu, 12 Sep 2019 04:02:19 +0000 (12:02 +0800)]
sctp: destroy bucket if failed to bind addr
There is one memory leak bug report:
BUG: memory leak
unreferenced object 0xffff8881dc4c5ec0 (size 40):
comm "syz-executor.0", pid 5673, jiffies
4298198457 (age 27.578s)
hex dump (first 32 bytes):
02 00 00 00 81 88 ff ff 00 00 00 00 00 00 00 00 ................
f8 63 3d c1 81 88 ff ff 00 00 00 00 00 00 00 00 .c=.............
backtrace:
[<
0000000072006339>] sctp_get_port_local+0x2a1/0xa00 [sctp]
[<
00000000c7b379ec>] sctp_do_bind+0x176/0x2c0 [sctp]
[<
000000005be274a2>] sctp_bind+0x5a/0x80 [sctp]
[<
00000000b66b4044>] inet6_bind+0x59/0xd0 [ipv6]
[<
00000000c68c7f42>] __sys_bind+0x120/0x1f0 net/socket.c:1647
[<
000000004513635b>] __do_sys_bind net/socket.c:1658 [inline]
[<
000000004513635b>] __se_sys_bind net/socket.c:1656 [inline]
[<
000000004513635b>] __x64_sys_bind+0x3e/0x50 net/socket.c:1656
[<
0000000061f2501e>] do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296
[<
0000000003d1e05e>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
This is because in sctp_do_bind, if sctp_get_port_local is to
create hash bucket successfully, and sctp_add_bind_addr failed
to bind address, e.g return -ENOMEM, so memory leak found, it
needs to destroy allocated bucket.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mao Wenan [Thu, 12 Sep 2019 04:02:18 +0000 (12:02 +0800)]
sctp: remove redundant assignment when call sctp_get_port_local
There are more parentheses in if clause when call sctp_get_port_local
in sctp_do_bind, and redundant assignment to 'ret'. This patch is to
do cleanup.
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mao Wenan [Thu, 12 Sep 2019 04:02:17 +0000 (12:02 +0800)]
sctp: change return type of sctp_get_port_local
Currently sctp_get_port_local() returns a long
which is either 0,1 or a pointer casted to long.
It's neither of the callers use the return value since
commit
62208f12451f ("net: sctp: simplify sctp_get_port").
Now two callers are sctp_get_port and sctp_do_bind,
they actually assumend a casted to an int was the same as
a pointer casted to a long, and they don't save the return
value just check whether it is zero or non-zero, so
it would better change return type from long to int for
sctp_get_port_local.
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Wed, 11 Sep 2019 19:50:51 +0000 (15:50 -0400)]
ip: support SO_MARK cmsg
Enable setting skb->mark for UDP and RAW sockets using cmsg.
This is analogous to existing support for TOS, TTL, txtime, etc.
Packet sockets already support this as of commit
c7d39e32632e
("packet: support per-packet fwmark for af_packet sendmsg").
Similar to other fields, implement by
1. initialize the sockcm_cookie.mark from socket option sk_mark
2. optionally overwrite this in ip_cmsg_send/ip6_datagram_send_ctl
3. initialize inet_cork.mark from sockcm_cookie.mark
4. initialize each (usually just one) skb->mark from inet_cork.mark
Step 1 is handled in one location for most protocols by ipcm_init_sk
as of commit
351782067b6b ("ipv4: ipcm_cookie initializers").
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalle Valo [Fri, 13 Sep 2019 15:15:12 +0000 (18:15 +0300)]
Merge ath-next from git://git./linux/kernel/git/kvalo/ath.git
ath.git patches for 5.4. Major changes:
wil6210
* add support for Enhanced Directional Multi-Gigabit (EDMG) channels 9-11
* add debugfs file to show PCM ring content
* report boottime_ns in scan results
ath9k
* add a separate loader for AR92XX (and older) pci(e) without eeprom,
enabled with the new ATH9K_PCI_NO_EEPROM Kconfig option
Yan-Hsuan Chuang [Thu, 12 Sep 2019 06:39:15 +0000 (14:39 +0800)]
rtw88: report RX power for each antenna
Report chains and chain_signal in ieee80211_rx_status.
It is useful for program such as tcpdump to see if the
antennas are well connected/placed.
8822C is able to receive CCK rates with 2 antennas, while
8822B can only use 1 antenna path to receive CCK rates.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Tsang-Shian Lin [Thu, 12 Sep 2019 06:39:14 +0000 (14:39 +0800)]
rtw88: fix wrong rx power calculation
Fix the wrong RF path for CCK rx power calculation.
Fixes:
e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Tsang-Shian Lin <thlin@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Michael Straube [Tue, 10 Sep 2019 19:04:22 +0000 (21:04 +0200)]
rtlwifi: rtl8192de: replace _rtl92d_evm_db_to_percentage with generic version
Function _rtl92d_evm_db_to_percentage is functionally identical
to the generic version rtl_evm_db_to_percentage, so remove
_rtl92d_evm_db_to_percentage and use the generic version instead.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Michael Straube [Tue, 10 Sep 2019 19:04:21 +0000 (21:04 +0200)]
rtlwifi: rtl8192cu: replace _rtl92c_evm_db_to_percentage with generic version
Function _rtl92c_evm_db_to_percentage is functionally identical
to the generic version rtl_evm_db_to_percentage, so remove
_rtl92c_evm_db_to_percentage and use the generic version instead.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Michael Straube [Tue, 10 Sep 2019 19:04:20 +0000 (21:04 +0200)]
rtlwifi: rtl8192ce: replace _rtl92c_evm_db_to_percentage with generic version
Function _rtl92c_evm_db_to_percentage is functionally identical
to the generic version rtl_evm_db_to_percentage, so remove
_rtl92c_evm_db_to_percentage and use the generic version instead.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Yan-Hsuan Chuang [Mon, 9 Sep 2019 07:16:11 +0000 (15:16 +0800)]
rtw88: allows to receive AMSDU in AMPDU
The hardware has enough buffer to receive like 8K for an MPDU.
So tell mac80211 that we can receive AMSDU in AMPDU.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Tzu-En Huang [Mon, 9 Sep 2019 07:16:10 +0000 (15:16 +0800)]
rtw88: add dynamic cck pd mechanism
This mechanism reduces the numbers of false alram in cck rate by
dynamically adjusting the value of power threshold and cs_ratio.
We determine the new value by three factors, which are rssi, false alarm
count and igi. Based on these factors, we define the current condition
into five levels. Compared to the previous level, if the level is changed,
we set the new values for power threshold and cs_ratio.
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Yan-Hsuan Chuang [Mon, 9 Sep 2019 07:16:09 +0000 (15:16 +0800)]
rtw88: move IQK/DPK into phy_calibration
Since 8822c requires to do not only IQK, but also DPK.
Move these calibrations that need to be done once the channel
is determined, into phy_calibration.
And note that the order of the calibrations matters, 8822c
should do IQK first, then DPK.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Tzu-En Huang [Mon, 9 Sep 2019 07:16:08 +0000 (15:16 +0800)]
rtw88: 8822c: add SW DPK support
Power amplifiers are not linear components, and require DPK to
reduce its nonlinearity. DPK is called Digital Pre-distortion
Calibration, can be used to compensate the output of power.
DPK tracking is in charge of tracking the thermal changes. And
it then shifts the power curve accordingly, which makes the
power output remains linear even if the PA works in different
temperature.
To perform DPK, the parameter table should also be updated.
And the table will be applied when device is powered on.
Then DPK will reference the values to calibrate.
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Yan-Hsuan Chuang [Mon, 9 Sep 2019 07:16:07 +0000 (15:16 +0800)]
rtw88: 8822c: add FW IQK support
Add support for doing IQK in firmware
Ideally the RF component's I/Q vectors should be orthogonal,
but usually they are not. So we need to calibrate for the RF
components, ex. PA/LNA, ADC/DAC.
And if the I/Q vectors are more orthogonal, the mixed signal
will have less deviation. This helps with those rates with
higher modulation (MCS8-9), because they have more strict
EVM/SNR requirement. Also the better of the quality of the
signal, the longer it can propagate, and the better throughput
performance we can get.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Tsang-Shian Lin [Mon, 9 Sep 2019 07:16:06 +0000 (15:16 +0800)]
rtw88: 8822c: Enable interrupt migration
Enable 8822C Tx/Rx interrupt migration.
In some platforms, performance test may cause heavy cpu loading and get
bad results. Interrupt migration can decrease the amount of interrupts,
and lower cpu loading.
Signed-off-by: Tsang-Shian Lin <thlin@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Chin-Yen Lee [Mon, 9 Sep 2019 07:16:05 +0000 (15:16 +0800)]
rtw88: 8822c: update pwr_seq to v13
update sequence to v13 to reduce power consumption
when MAC power off
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Yan-Hsuan Chuang [Mon, 9 Sep 2019 07:16:04 +0000 (15:16 +0800)]
rtw88: 8822c: update PHY parameter to v38
Update PHY hardware parameters to v38.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Mon, 9 Sep 2019 01:59:58 +0000 (20:59 -0500)]
rtlwifi: rtl8188ee: rtl8192ce: rtl8192de: rtl8723ae: rtl8821ae: Remove some unused bit manipulation macros
Each of these drivers defines some device to host macros that are never
used, thus they can be removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Mon, 9 Sep 2019 01:59:57 +0000 (20:59 -0500)]
rtlwifi: rtl8723be: Convert inline routines to little-endian words
In this step, the read/write routines for the descriptors are converted
to use __le32 quantities, thus a lot of casts can be removed. Callback
routines still use the 8-bit arrays, but these are changed within the
specified routine.
The macro that cleared a descriptor has now been converted into an inline
routine.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Mon, 9 Sep 2019 01:59:56 +0000 (20:59 -0500)]
rtlwifi: rtl8723be: Convert macros that set descriptor
As a first step in the conversion, the macros that set the RX and TX
descriptors are converted to static inline routines, and the names are
changed from upper to lower case. To minimize the changes in a given
step, the input descriptor information is left as as a byte array
(u8 *), even though it should be a little-endian word array (__le32 *).
That will be changed in the next patch.
Several places where checkpatch.pl complains about a space after a cast
are fixed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Mon, 9 Sep 2019 01:59:55 +0000 (20:59 -0500)]
rtlwifi: rtl8723be: Replace local bit manipulation macros
This driver uses a set of local macros to manipulate the RX and TX
descriptors, which are all little-endian quantities. These macros
are replaced by the bitfield macros le32p_replace_bits() and
le32_get_bits(). In several places, the macros operated on an entire
32-bit word. In these cases, a direct read or replacement is used.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Mon, 9 Sep 2019 01:59:54 +0000 (20:59 -0500)]
rtlwifi: rtl8723be: Remove unused SET_XXX and GET_XXX macros
iAs the first step in converting from macros that get/set information
in the RX and TX descriptors, unused macros are being removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Mon, 9 Sep 2019 01:59:53 +0000 (20:59 -0500)]
rtlwifi: rtl8723ae: Convert inline routines to little-endian words
In this step, the read/write routines for the descriptors are converted
to use __le32 quantities, thus a lot of casts can be removed. Callback
routines still use the 8-bit arrays, but these are changed within the
specified routine.
The macro that cleared a descriptor has now been converted into an inline
routine.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Mon, 9 Sep 2019 01:59:52 +0000 (20:59 -0500)]
rtlwifi: rtl8723ae: Convert macros that set descriptor
As a first step in the conversion, the macros that set the RX and TX
descriptors are converted to static inline routines, and the names are
changed from upper to lower case. To minimize the changes in a given
step, the input descriptor information is left as as a byte array
(u8 *), even though it should be a little-endian word array (__le32 *).
That will be changed in the next patch.
Several places where checkpatch.pl reports lines too long are fixed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Mon, 9 Sep 2019 01:59:51 +0000 (20:59 -0500)]
rtlwifi: rtl8723ae: Replace local bit manipulation macros
This driver uses a set of local macros to manipulate the RX and TX
descriptors, which are all little-endian quantities. These macros
are replaced by the bitfield macros le32p_replace_bits() and
le32_get_bits(). In several places, the macros operated on an entire
32-bit word. In these cases, a direct read or replacement is used.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Mon, 9 Sep 2019 01:59:50 +0000 (20:59 -0500)]
rtlwifi: rtl8723ae: Remove unused GET_XXX and SET_XXX macros
As the first step in converting from macros that get/set information
in the RX and TX descriptors, unused macros are being removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Lubomir Rintel [Sat, 7 Sep 2019 15:18:55 +0000 (17:18 +0200)]
libertas: use mesh_wdev->ssid instead of priv->mesh_ssid
With the commit
e86dc1ca4676 ("Libertas: cfg80211 support") we've lost
the ability to actually set the Mesh SSID from userspace.
NL80211_CMD_SET_INTERFACE with NL80211_ATTR_MESH_ID sets the mesh point
interface's ssid field. Let's use that one for the Libertas Mesh
operation
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Colin Ian King [Fri, 6 Sep 2019 15:40:53 +0000 (16:40 +0100)]
ssb: make array pwr_info_offset static const, makes object smaller
Don't populate the array pwr_info_offset on the stack but instead make it
static const. Makes the object code smaller by 207 bytes.
Before:
text data bss dec hex filename
26066 3000 64 29130 71ca drivers/ssb/pci.o
After:
text data bss dec hex filename
25763 3096 64 28923 70fb drivers/ssb/pci.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>