OSDN Git Service
Nicholas Piggin [Sun, 13 Aug 2017 01:33:43 +0000 (11:33 +1000)]
powerpc/64s/radix: Do not allocate SLB shadow structures
These are unused in radix mode.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Sun, 13 Aug 2017 01:33:41 +0000 (11:33 +1000)]
powerpc/64s/radix: Remove bolted-SLB address limit for per-cpu stacks
Radix MMU does not take SLB or TLB interrupts when accessing kernel
linear address. Remove this restriction for radix mode.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Sun, 13 Aug 2017 01:33:39 +0000 (11:33 +1000)]
powerpc/powernv: powernv platform is not constrained by RMA
Remove incorrect comment about real mode address restrictions on
powernv (bare metal), and unnecessary clamping to ppc64_rma_size.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 25 Aug 2017 04:30:35 +0000 (14:30 +1000)]
powerpc/64s: idle POWER9 can execute stop in virtual mode
The hardware can execute stop in any context, and KVM does not
require real mode because siblings do not share MMU state. This
saves a switch to real-mode when going idle.
Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Tue, 29 Aug 2017 11:40:35 +0000 (21:40 +1000)]
powerpc/64s: Drop no longer used IDLE_STATE_ENTER_SEQ
There are no longer any callers of IDLE_STATE_ENTER_SEQ, all callers
use IDLE_STATE_ENTER_SEQ_NORET. So drop the former.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Split out of larger patch, write change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Tue, 29 Aug 2017 11:34:40 +0000 (21:34 +1000)]
powerpc/64s: POWER9 can execute stop without a sync sequence
We don't need to use IDLE_STATE_ENTER_SEQ_NORET on Power9.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Tue, 29 Aug 2017 11:36:35 +0000 (21:36 +1000)]
powerpc/64s: Move IDLE_STATE_ENTER_SEQ[_NORET] into idle_book3s.S
This macro is only used in idle_book3s.S, move it in there and add a
more descriptive comment.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Split out of larger patch and write change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Tue, 29 Aug 2017 11:26:30 +0000 (21:26 +1000)]
Merge branch 'topic/ppc-kvm' into next
Merge Nicks commit to rework the KVM thread management, shared with the
KVM tree via the ppc-kvm topic branch.
Nicholas Piggin [Fri, 25 Aug 2017 04:30:33 +0000 (14:30 +1000)]
KVM: PPC: Book3S HV: POWER9 does not require secondary thread management
POWER9 CPUs have independent MMU contexts per thread, so KVM does not
need to quiesce secondary threads, so the hwthread_req/hwthread_state
protocol does not have to be used. So patch it away on POWER9, and patch
away the branch from the Linux idle wakeup to kvm_start_guest that is
never used.
Add a warning and error out of kvmppc_grab_hwthread in case it is ever
called on POWER9.
This avoids a hwsync in the idle wakeup path on POWER9.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Use WARN(...) instead of WARN_ON()/pr_err(...)]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:38:06 +0000 (15:38 +1000)]
powerpc/configs/6xx: Drop removed CONFIG_USB_LED
In commit
a335aaf3125c ("usb: misc: remove outdated USB LED driver")
CONFIG_USB_LED was removed, so drop it from our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:38:05 +0000 (15:38 +1000)]
powerpc/configs/6xx: Drop no longer selectable CONFIG_BT_HCIUART_LL
Since commit
76c4969fecb1 ("Bluetooth: hci_uart: fix kconfig
dependency") we can no longer select CONFIG_BT_HCIUART_LL.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:38:04 +0000 (15:38 +1000)]
powerpc/configs/c2k: Switch CONFIG_GEN_RTC from =m to =y
In commit
835ea93e9d26 ("char/genrtc: remove powerpc support"),
CONFIG_GEN_RTC switch from tristate to bool, update the defconfig to
match.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:38:03 +0000 (15:38 +1000)]
powerpc/configs/6xx: Switch CONFIG_USB_EHCI_FSL to =m
In commit
ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an
independent driver module"), CONFIG_USB_EHCI_FSL was switched from
built-in to modular. Update the defconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:38:02 +0000 (15:38 +1000)]
powerpc/configs/6xx: Drop no longer needed CONFIG_BT_HCIUART_H4
Since commit
943cc592195e ("Bluetooth: bpa10x: Use h4_recv_buf helper
for frame reassembly") we no longer need to set CONFIG_BT_HCIUART_H4
in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:38:01 +0000 (15:38 +1000)]
powerpc/configs/6xx: Drop no longer needed CONFIG_NETFILTER_XT_MATCH_SOCKET
Since commit
8db4c5be88f6 ("netfilter: move socket lookup
infrastructure to nf_socket_ipv{4,6}.c") we no longer need to set
CONFIG_NETFILTER_XT_MATCH_SOCKET in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:38:00 +0000 (15:38 +1000)]
powerpc/configs/6xx: Reinstate CONFIG_CPU_FREQ_STAT
In commit
1aefc75b2449 ("cpufreq: stats: Make the stats code
non-modular"), the CPU_FREQ_STAT code was made non-modular. Our
defconfig still said =m though, which meant we no longer got the
code at all. Switch the defconfig to =y.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:59 +0000 (15:37 +1000)]
powerpc/configs/6xx: Drop no longer needed CONFIG_NF_CONNTRACK_PROC_COMPAT
Since commit
adf0516845bc ("netfilter: remove ip_conntrack* sysctl
compat code") we no longer need to set CONFIG_NF_CONNTRACK_PROC_COMPAT
in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:58 +0000 (15:37 +1000)]
powerpc/configs/6xx: Drop removed CONFIG_BLK_DEV_HD
In commit
8e14be53f470 ("remove the obsolete hd driver") the
CONFIG_BLK_DEV_HD symbol was removed, so drop it from the defconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:57 +0000 (15:37 +1000)]
powerpc/configs/6xx: Clean up duplicate CONFIG_EXT4 values
We had two values for CONFIG_EXT4, =m and =y, just use =y.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:56 +0000 (15:37 +1000)]
powerpc/configs/6xx: Drop no longer needed CONFIG_TIMER_STATS
Since commit
dfb4357da6dd ("time: Remove CONFIG_TIMER_STATS") we no
longer need to set CONFIG_TIMER_STATS in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:55 +0000 (15:37 +1000)]
powerpc/configs/6xx: Turn CONFIG_DRM_RADEON back on
In commit
d92d9c3a1448 ("drm: hide legacy drivers with CONFIG_DRM_LEGACY")
CONFIG_DRM_RADEON was moved behind CONFIG_DRM_LEGACY meaning it
stopped being enabled by ppc6xx_defconfig. Although no one has
noticed, given this is basically a legacy platform, it seems anyone
who is using it probably still wants this driver. So turn it back on
for now.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:54 +0000 (15:37 +1000)]
powerpc/configs/mpc5200: Drop no longer needed CONFIG_FB
Since commit
a03fdcb18632 ("drm: Add top level Kconfig option for DRM
fbdev emulation") we no longer need to set CONFIG_FB in our
defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:52 +0000 (15:37 +1000)]
powerpc/configs: Update for CONFIG_INPUT_MOUSEDEV=n
In commit
73d8ef76006b ("Input: mousedev - stop offering PS/2 to
userspace by default") the symbol INPUT_MOUSEDEV went from being
'default y' to 'default n' (implied).
That means we no longer need to explicitly disable it in our
defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:51 +0000 (15:37 +1000)]
powerpc/configs: Drop removed CONFIG_LOGFS
In commit
1d0fd57a50aa ("logfs: remove from tree"), logfs was removed
from the tree, so we can drop it from our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:50 +0000 (15:37 +1000)]
powerpc/configs: Turn CONFIG_R128 back in pmac32_defconfig
In commit
d92d9c3a1448 ("drm: hide legacy drivers with
CONFIG_DRM_LEGACY") CONFIG_R128 was moved behind CONFIG_DRM_LEGACY
meaning it stopped being enabled by pmac32_defconfig. Although no one
has noticed, given this is basically a legacy platform, it seems
anyone who is using it probably still wants this driver. So turn it
back on for now.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:49 +0000 (15:37 +1000)]
powerpc/configs: Drop no longer needed CONFIG_LIBCRC32C
Since commit
300ae149468f ("netfilter: select LIBCRC32C together with
SCTP conntrack") we no longer need to set CONFIG_LIBCRC32C in our
defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:48 +0000 (15:37 +1000)]
powerpc/configs: Drop unnecessary CONFIG_EDAC from ppc64e
There are no EDAC drivers for ppc64e.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:47 +0000 (15:37 +1000)]
powerpc/configs: Drop no longer needed CONFIG_SCSI
Since commit
67f6d6655993 ("powerpc: convert amigaone_defconfig to use
libata PATA drivers") we no longer need to set CONFIG_SCSI in our
defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:46 +0000 (15:37 +1000)]
powerpc/configs: Drop no longer needed CONFIG_IPV6
Since commit
de551f2eb22a ("net: Build IPv6 into kernel by default")
we no longer need to set CONFIG_IPV6 in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:45 +0000 (15:37 +1000)]
powerpc/configs: Add CONFIG_RAS now required for CONFIG_EDAC
In commit
e3c4ff6d8c94 ("EDAC: Remove EDAC_MM_EDAC") CONFIG_EDAC grew
a dependency on CONFIG_RAS. Some of our defconfigs don't have the
latter, which means we lose CONFIG_EDAC, so add CONFIG_RAS to fix
that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:44 +0000 (15:37 +1000)]
powerpc/configs: Drop no longer needed CONFIG_AUDITSYSCALL
Since commit
cb74ed278f80 ("audit: always enable syscall auditing when
supported and audit is enabled") we no longer need to set
CONFIG_AUDITSYSCALL in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:43 +0000 (15:37 +1000)]
powerpc/configs: Drop CONFIG_SERIAL_TXX9_* from cell/ppc64
In commit
bf4981a00636 ("powerpc: Remove the celleb support") we
dropped the celleb support, which made these symbols unselectable
because we no longer select HAS_TX99_SERIAL. So drop them from the
defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:42 +0000 (15:37 +1000)]
powerpc/configs: Drop MEMORY_HOTREMOVE from ppc64/cell
xxxx
In commit
577ec789a79e ("powerpc/cell: Drop select of MEMORY_HOTPLUG")
we removed the last traces of any dependency between
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:41 +0000 (15:37 +1000)]
powerpc/configs: Drop unnecessary CONFIG_POWERNV_OP_PANEL
In commit
43a1dd9b5fc6 ("powerpc/powernv: Add driver for operator
panel on FSP machines") we added CONFIG_POWERNV_OP_PANEL=m to the
powernv defconfig, but it's default m so that's no necessary.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:40 +0000 (15:37 +1000)]
powerpc/configs: Drop no longer needed PCI_MSI on powernv
In commit
a311e738b6d8 ("powerpc/powernv: Make PCI non-optional") we
made PCI (and therefore PCI_MSI) non-optional on powernv, so it
doesn't need to be in the defconfig anymore.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:39 +0000 (15:37 +1000)]
powerpc/configs: Drop no longer needed CONFIG_SMP for pseries/ppc64/powernv
In commit
40e275653e2c ("powerpc/powernv: Always enable SMP when
building powernv") and
270e2dc9b803 ("powerpc/pseries: Always enable
SMP when building pseries") we forced CONFIG_SMP on for some configs.
Therefore we don't need to set it in those configs anymore.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:38 +0000 (15:37 +1000)]
powerpc/configs: Drop unnecessary CONFIG_UPROBE_EVENT
In commit
6b0b7551428e ("perf/core: Rename CONFIG_[UK]PROBE_EVENT to
CONFIG_[UK]PROBE_EVENTS") it was renamed to CONFIG_UPROBE_EVENTS.
Additionally it's default y, and we have the prerequisites enabled, so
we don't need it in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:37 +0000 (15:37 +1000)]
powerpc/configs: Drop unnecessary CONFIG_NUMA_BALANCING_DEFAULT_ENABLED
In commit
9654f95a081a ("powerpc: Enable NUMA balancing in
pseries[_le]_defconfig") we added CONFIG_NUMA_BALANCING_DEFAULT_ENABLED
to our defconfigs. But it's already enabled by default, so drop it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:36 +0000 (15:37 +1000)]
powerpc/configs: Drop no longer needed CONFIG_DEVPTS_MULTIPLE_INSTANCES
Since commit
eedf265aa003 ("devpts: Make each mount of devpts an
independent filesystem.") we no longer need to set
CONFIG_DEVPTS_MULTIPLE_INSTANCES in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:35 +0000 (15:37 +1000)]
powerpc/configs: Drop no longer needed CONFIG_CRYPTO_GCM
Since commit
00b9cfa3ff38 ("mac80111: Add GCMP and GCMP-256 ciphers")
we no longer need to set CONFIG_CRYPTO_GCM in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:34 +0000 (15:37 +1000)]
powerpc/configs: Drop no longer needed CONFIG_CRYPTO_NULL in g5 / c2k
Since commit
3491244c6298 ("crypto: echainiv - Set Kconfig default to
m") we no longer need to set CONFIG_CRYPTO_NULL in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:33 +0000 (15:37 +1000)]
powerpc/configs: Drop no longer needed CONFIG_CRYPTO_NULL
Since commit
00b9cfa3ff38 ("mac80111: Add GCMP and GCMP-256 ciphers")
we no longer need to set CONFIG_CRYPTO_NULL in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:32 +0000 (15:37 +1000)]
powerpc/configs: Drop no longer needed CONFIG_CRYPTO_SHA256
Since commit
826775bbf38f ("crypto: drbg - Add select on sha256") we
no longer need to set CONFIG_CRYPTO_SHA256 in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:31 +0000 (15:37 +1000)]
powerpc/configs: Drop no longer needed CONFIG_CRYPTO_ECB
Since commit
12cb3a1c4184 ("crypto: xts - Add ECB dependency") we no
longer need to set CONFIG_CRYPTO_ECB in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:30 +0000 (15:37 +1000)]
powerpc/configs: Drop no longer needed CONFIG_CRYPTO_HMAC
Since commit
401e4238f35c ("crypto: rng - Make DRBG the default RNG")
we no longer need to set CONFIG_CRYPTO_HMAC in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:29 +0000 (15:37 +1000)]
powerpc/configs: Drop no longer needed CONFIG_CRYPTO_DEV_VMX_ENCRYPT
Since commit
ccf5c442a1b8 ("crypto: vmx - Convert to CPU feature based
module autoloading") we no longer need to set
CONFIG_CRYPTO_DEV_VMX_ENCRYPT in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:28 +0000 (15:37 +1000)]
powerpc/configs: Update for CONFIG_NF_CT_PROTO_(SCTP|UDPLITE)=y
In commit
a85406afeb3e ("netfilter: conntrack: built-in support for
SCTP"), NF_CT_PROTO_SCTP switched from tristate to bool and became
default y. Similarly in commit
9b91c96c5d1f ("netfilter: conntrack:
built-in support for UDPlite"), NF_CT_PROTO_UDPLITE switched from
tristate to bool and became default y.
We had a few configs which set them to =m, which is no longer valid.
We don't need to change them to =y because both symbols are default y
and are enabled automatically based on the other symbols in the
affected defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:27 +0000 (15:37 +1000)]
powerpc/configs: Update for CONFIG_FIXED_PHY being selected by CONFIG_OF_MDIO
In commit
a5e4bd991362 ("of_mdio: select fixed phy support
unconditionally"), CONFIG_OF_MDIO began selecting CONFIG_FIXED_PHY.
That means we no longer need to set it some of our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:26 +0000 (15:37 +1000)]
powerpc/configs: Update for CONFIG_DEBUG_FS being selected via CONFIG_RCU_TRACE
In commit
961518259b3b ("rcu: Enable RCU tracepoints by default to aid
in debugging"), CONFIG_RCU_TRACE was made default y (if CONFIG_TREE_RCU=y,
which it is for some of our configs).
That in turn causes CONFIG_TREE_RCU_TRACE to be enabled, which selects
CONFIG_DEBUG_FS. The end result is that CONFIG_DEBUG_FS is forced on,
meaning we don't have to enable it in some of our configs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:25 +0000 (15:37 +1000)]
powerpc/configs: Drop no longer needed CONFIG_DEVKMEM
Since commit
e334cd69fa65 ("Move CONFIG_DEVKMEM default to n") we no
longer need to set CONFIG_DEVKMEM in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:24 +0000 (15:37 +1000)]
powerpc/configs: Drop no longer needed CONFIG_FHANDLE
Since commit
f76be61755c5 ("Make CONFIG_FHANDLE default y") we no
longer need to set CONFIG_FHANDLE in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:23 +0000 (15:37 +1000)]
powerpc/configs: Explicitly drop CONFIG_INPUT_MOUSEDEV
In commit
73d8ef76006b ("Input: mousedev - stop offering PS/2 to userspace by
default") (Jan 2017), CONFIG_INPUT_MOUSEDEV was switched from default y to
default n, with the explanation:
Evdev interface has been available for many years and by now everyone
is switched to using it, so let's stop offering /dev/input/mouseN
and /dev/psaux by default.
We had a number of configs which had it enabled, but going by the above
explanation probably don't need it enabled anymore.
So drop the last remnants of it from our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:22 +0000 (15:37 +1000)]
powerpc/configs: Drop unneeded CONFIG_CRYPTO_ANSI_CPRNG
Since commit
401e4238f35c ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_ANSI_CPRNG in our defconfigs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 05:37:21 +0000 (15:37 +1000)]
powerpc/configs: Update for symbol movement only
Update defconfigs for symbols that have moved around, without their
value changing.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 13:56:24 +0000 (23:56 +1000)]
powerpc/oops: Line up NIP & MSR with other rows
This is purely cosmetic, but does look nicer IMHO:
Before:
task:
c000000001453400 task.stack:
c000000001c6c000
NIP:
c000000000a0fbfc LR:
c000000000a0fbf4 CTR:
c000000000ba6220
REGS:
c0000001fffef820 TRAP: 0300 Not tainted (
4.13.0-rc6-gcc-6.3.1-00234-g423af27f7d81)
MSR:
8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR:
88088242 XER:
00000000
CFAR:
c0000000000b3488 DAR:
0000000000000000 DSISR:
42000000 SOFTE: 0
After:
task:
c000000001453400 task.stack:
c000000001c6c000
NIP:
c000000000a0fbfc LR:
c000000000a0fbf4 CTR:
c000000000ba6220
REGS:
c0000001fffef820 TRAP: 0300 Not tainted (
4.13.0-rc6-gcc-6.3.1-00234-g423af27f7d81-dirty)
MSR:
8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR:
88088242 XER:
00000000
CFAR:
c0000000000b34a4 DAR:
0000000000000000 DSISR:
42000000 SOFTE: 0
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 13:56:23 +0000 (23:56 +1000)]
powerpc/oops: Print CR/XER on same line as MSR
Somehow we missed this when the pr_cont() changes went in. Fix CR/XER
to go on the same line as MSR, as they have historically, eg:
MSR:
8000000000009032 <SF,EE,ME,IR,DR,RI> CR:
4804408a XER:
20000000
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 13:56:22 +0000 (23:56 +1000)]
powerpc/oops: Use IS_ENABLED() for oops markers
Just because it looks less gross.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 13:56:21 +0000 (23:56 +1000)]
powerpc/oops: Print the kernel's endian in the oops
Although the MSR tells you what endian you're in it's possible that
isn't the same endian the kernel was built for, and if that happens
you're usually having a very bad day. So print a marker to make
it 100% clear which endian the kernel was built for.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 13:56:20 +0000 (23:56 +1000)]
powerpc/oops: Fix the oops markers to use pr_cont()
When we oops we print a few markers for significant config options
such as PREEMPT, SMP etc. Currently these appear on separate lines
because we're not using pr_cont() properly. Fix it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
LABBE Corentin [Wed, 16 Aug 2017 12:34:44 +0000 (14:34 +0200)]
powerpc/powernv: Fix build error in opal-imc.c when NUMA=n
When building a random powerpc kernel I hit this build error:
arch/powerpc/platforms/powernv/opal-imc.c:130:13: error : assignment
discards « const » qualifier from pointer target type
[-Werror=discarded-qualifiers]
l_cpumask = cpumask_of_node(nid);
^
This happens because when CONFIG_NUMA=n cpumask_of_node() returns a
const pointer.
This patch simply adds const to l_cpumask to fix this issue.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Flesh out change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rashmica Gupta [Thu, 1 Jun 2017 05:34:40 +0000 (15:34 +1000)]
Add documentation for the powerpc memtrace debugfs files
CONFIG_PPC_MEMTRACE must be set to use this feature. This can only be
used on powernv platforms.
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
[mpe: Update dates and kernel versions, mention size is in bytes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rashmica Gupta [Thu, 1 Jun 2017 05:34:38 +0000 (15:34 +1000)]
powerpc/powernv: Enable removal of memory for in memory tracing
The hardware trace macro feature requires access to a chunk of real
memory. This patch provides a debugfs interface to do this. By
writing an integer containing the size of memory to be unplugged into
/sys/kernel/debug/powerpc/memtrace/enable, the code will attempt to
remove that much memory from the end of each NUMA node.
This patch also adds additional debugsfs files for each node that
allows the tracer to interact with the removed memory, as well as
a trace file that allows userspace to read the generated trace.
Note that this patch does not invoke the hardware trace macro, it
only allows memory to be removed during runtime for the trace macro
to utilise.
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
[mpe: Minor formatting etc fixups]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Naveen N. Rao [Wed, 14 Jun 2017 15:44:00 +0000 (21:14 +0530)]
powerpc/uprobes: Implement arch_uretprobe_is_alive()
This helper is used to detect if a uprobe'd function has returned
through a setjmp/longjmp, rather than branching to the LR that was
updated previously by us. This fixes a SIGSEGV that gets generated when
programs use setjmp/longjmp with uretprobes.
We use the arm64 model (arch/arm64/kernel/probes/uprobes.c:
arch_uretprobe_is_alive()) for detecting when stack frames have been
removed from under us.
Reference:
https://marc.info/?l=linux-kernel&m=
143748610330073
commit
7b868e4802a86 ("uprobes/x86: Reimplement arch_uretprobe_is_alive()")
commit
db087ef69a2b1 ("uprobes/x86: Make arch_uretprobe_is_alive(RP_CHECK_CALL) more
clever")
Tested with the test program from:
https://sourceware.org/git/gitweb.cgi?p=systemtap.git;a=blob;f=testsuite/systemtap.base/bz5274.c;hb=HEAD
And this script:
$ cat test.sh
#!/bin/bash
perf probe -x ./bz5274 -a bz5274_main_return=main%return
perf probe -x ./bz5274 -a bz5274_funca_return=funca%return
perf probe -x ./bz5274 -a bz5274_funcb_return=funcb%return
perf probe -x ./bz5274 -a bz5274_funcc_return=funcc%return
perf probe -x ./bz5274 -a bz5274_funcd_return=funcd%return
perf record -e 'probe_bz5274:*' -aR ./bz5274
Reported-by: Gustavo Luiz Duarte <gduarte@redhat.com>
Reported-by: zsun@redhat.com
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Naveen N. Rao [Thu, 8 Jun 2017 19:16:55 +0000 (00:46 +0530)]
powerpc/kprobes: Don't save/restore DAR/DSISR to/from pt_regs for optprobes
We don't save/restore these across a trap, or with KPROBES_ON_FTRACE.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cédric Le Goater [Tue, 8 Aug 2017 09:02:49 +0000 (11:02 +0200)]
powerpc/xive: Fix the size of the cpumask used in xive_find_target_in_mask()
When called from xive_irq_startup(), the size of the cpumask can be
larger than nr_cpu_ids. This can result in a WARN_ON such as:
WARNING: CPU: 10 PID: 1 at ../arch/powerpc/sysdev/xive/common.c:476 xive_find_target_in_mask+0x110/0x2f0
...
NIP [
c00000000008a310] xive_find_target_in_mask+0x110/0x2f0
LR [
c00000000008a2e4] xive_find_target_in_mask+0xe4/0x2f0
Call Trace:
xive_find_target_in_mask+0x74/0x2f0 (unreliable)
xive_pick_irq_target.isra.1+0x200/0x230
xive_irq_startup+0x60/0x180
irq_startup+0x70/0xd0
__setup_irq+0x7bc/0x880
request_threaded_irq+0x14c/0x2c0
request_event_sources_irqs+0x100/0x180
__machine_initcall_pseries_init_ras_IRQ+0x104/0x134
do_one_initcall+0x68/0x1d0
kernel_init_freeable+0x290/0x374
kernel_init+0x24/0x170
ret_from_kernel_thread+0x5c/0x74
This happens because we're being called with our affinity mask set to
irq_default_affinity. That in turn was populated using
cpumask_setall(), which sets NR_CPUs worth of bits, not nr_cpu_ids
worth. Finally cpumask_weight() will return > nr_cpu_ids when passed a
mask which has > nr_cpu_ids bits set.
Fix it by limiting the value returned by cpumask_weight().
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[mpe: Add change log details on actual cause]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 11 Aug 2017 16:39:07 +0000 (02:39 +1000)]
powerpc/64: Optimise set/clear of CTRL[RUN] (runlatch)
On modern CPUs the CTRL register is read-only except bit 63 which is
the run latch control. This means it can be updated with a mtspr
rather than mfspr/mtspr.
To accomodate older CPUs (Cell at least), where there are other bits
in the register, we still do a read/modify/write on pre 2.06 CPUs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Update change log to mention 2.06 workaround]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 11 Aug 2017 16:39:06 +0000 (02:39 +1000)]
powerpc/64s: Remove spurious IRQ reason in IRQ replay
HVI interrupts have always used 0x500, so remove the dead branch.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 11 Aug 2017 16:39:05 +0000 (02:39 +1000)]
powerpc/64: Remove redundant instruction in interrupt replay
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 11 Aug 2017 16:39:04 +0000 (02:39 +1000)]
powerpc/64s: Use the HV handler for external IRQ replay in HV mode on POWER9
POWER9 host external interrupts use the h_virt_irq_common handler, so
use that to replay them rather than using the hardware_interrupt_common
handler. Both call do_IRQ, but using the correct handler reduces
i-cache footprint.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 11 Aug 2017 16:39:03 +0000 (02:39 +1000)]
powerpc/64s: Merge HV and non-HV paths for doorbell IRQ replay
This results in smaller code, and fewer branches. This relies on the
fact that both the 0xe80 and 0xa00 handlers call the same upper level
code, namely doorbell_exception().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Mention we rely on the implementation of the 0xe80/0xa00 handlers]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 11 Aug 2017 16:39:02 +0000 (02:39 +1000)]
powerpc/64: Cleanup __check_irq_replay()
Move the clearing of irq_happened bits into the condition where they
were found to be set. This reduces instruction count slightly, and
reduces stores into irq_happened.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 11 Aug 2017 16:39:01 +0000 (02:39 +1000)]
powerpc/64s: masked_interrupt() returns to kernel so avoid restoring r13
Places in the kernel where r13 is not the PACA pointer must have
maskable interrupts disabled, so r13 does not have to be restored when
returning from a soft-masked interrupt. We should never have
interrupts soft disabled when we're in user space.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 11 Aug 2017 16:39:00 +0000 (02:39 +1000)]
powerpc/64s: Optimise clearing of MSR_EE in masked_[H]interrupt()
MSR_EE is always enabled in SRR1 for masked interrupts, so we can use
xor to clear it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Fri, 11 Aug 2017 16:38:59 +0000 (02:38 +1000)]
powerpc/64s: Avoid a branch in masked_[H]interrupt()
Interrupts which do not require EE to be cleared can all be tested
with a single bitwise test.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Mon, 24 Jul 2017 04:28:03 +0000 (14:28 +1000)]
powerpc/mm: Make switch_mm_irqs_off() out of line
It's too big to be inline, there is no reason to keep it
that way.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Rework to incorporate the comment changes via fixes branch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Mon, 24 Jul 2017 04:28:02 +0000 (14:28 +1000)]
powerpc/mm: Optimize detection of thread local mm's
Instead of comparing the whole CPU mask every time, let's
keep a counter of how many bits are set in the mask. Thus
testing for a local mm only requires testing if that counter
is 1 and the current CPU bit is set in the mask.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Mon, 24 Jul 2017 04:28:01 +0000 (14:28 +1000)]
powerpc/mm: Use mm_is_thread_local() instread of open-coding
We open-code testing for the mm being local to the current CPU
in a few places. Use our existing helper instead.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Mon, 24 Jul 2017 04:27:59 +0000 (14:27 +1000)]
powerpc/mm: Avoid double irq save/restore in activate_mm
It calls switch_mm() which already does the irq save/restore
these days.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Mon, 24 Jul 2017 04:27:58 +0000 (14:27 +1000)]
powerpc/mm: Move pgdir setting into a helper
Makes switch_mm_irqs_off() a bit more readable
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Tue, 22 Aug 2017 01:51:37 +0000 (11:51 +1000)]
powerpc/64s: Fix replay interrupt return label name
In __replay_interrupt() we take the address of a local label so we can
return to it later. However the assembler turns the local label into a
symbol with a name like ".L1^B42" - where "^B" is literally "\002".
This does not make for pleasant stack traces. Fix it by giving the
label a sensible name.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rob Herring [Mon, 21 Aug 2017 15:16:49 +0000 (10:16 -0500)]
powerpc: pseries: remove dlpar_attach_node dependency on full path
In preparation to stop storing the full node path in full_name, remove the
dependency on full_name from dlpar_attach_node(). Callers of
dlpar_attach_node() already have the parent device_node, so just pass the
parent node into dlpar_attach_node instead of the path. This avoids doing
a lookup of the parent node by the path.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rob Herring [Mon, 21 Aug 2017 15:16:47 +0000 (10:16 -0500)]
powerpc: Convert to using %pOF instead of full_name
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Scott Wood <oss@buserror.net>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Tue, 22 Aug 2017 05:14:50 +0000 (15:14 +1000)]
powerpc/vio: Use device_type to detect family
Currently in the vio.c code we use a comparision against the parent
device node's full path to decide if the device is a PFO or VIO family
device.
Both the ibm,platform-facilities and vdevice nodes are defined by PAPR,
and must have a matching device_type. So instead of using the path we
can instead compare the device_type.
I've checked Qemu and kvmtool both do this correctly, and all the
PowerVM systems I have access to do also. So it seems to be safe.
This removes the dependency on full_name, which is being removed
upstream.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 23 Aug 2017 12:20:10 +0000 (22:20 +1000)]
Merge branch 'fixes' into next
There's a non-trivial dependency between some commits we want to put in
next and the KVM prefetch work around that went into fixes. So merge
fixes into next.
Arvind Yadav [Mon, 19 Jun 2017 05:44:25 +0000 (11:14 +0530)]
macintosh/rack-meter: Make of_device_ids const
of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
407 576 0 983 3d7 drivers/macintosh/rack-meter.o
File size after constify rackmeter_match.
text data bss dec hex filename
807 176 0 983 3d7 drivers/macintosh/rack-meter.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Mon, 24 Jul 2017 04:28:00 +0000 (14:28 +1000)]
powerpc/mm: Ensure cpumask update is ordered
There is no guarantee that the various isync's involved with
the context switch will order the update of the CPU mask with
the first TLB entry for the new context being loaded by the HW.
Be safe here and add a memory barrier to order any subsequent
load/store which may bring entries into the TLB.
The corresponding barrier on the other side already exists as
pte updates use pte_xchg() which uses __cmpxchg_u64 which has
a sync after the atomic operation.
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add comments in the code]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Thu, 27 Jul 2017 06:24:55 +0000 (11:54 +0530)]
powerpc/mm/cxl: Add the fault handling cpu to mm cpumask
We use mm cpumask for serializing against lockless page table walk.
Anybody who is doing a lockless page table walk is expected to disable
irq and only cpus in mm cpumask is expected do the lockless walk. This
ensure that a THP split can send IPI to only cpus in the mm cpumask,
to make sure there are no parallel lockless page table walk.
Add the CAPI fault handling cpu to the mm cpumask so that we can do
the lockless page table walk while inserting hash page table entries.
Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Thu, 27 Jul 2017 06:24:54 +0000 (11:54 +0530)]
powerpc/mm: Don't send IPI to all cpus on THP updates
Now that we made sure that lockless walk of linux page table is mostly
limitted to current task(current->mm->pgdir) we can update the THP
update sequence to only send IPI to CPUs on which this task has run.
This helps in reducing the IPI overload on systems with large number
of CPUs.
WRT kvm even though kvm is walking page table with vpc->arch.pgdir,
it is done only on secondary CPUs and in that case we have primary CPU
added to task's mm cpumask. Sending an IPI to primary will force the
secondary to do a vm exit and hence this mm cpumask usage is safe
here.
WRT CAPI, we still end up walking linux page table with capi context
MM. For now the pte lookup serialization sends an IPI to all CPUs in
CPI is in use. We can further improve this by adding the CAPI
interrupt handling CPU to task mm cpumask. That will be done in a
later patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Thu, 17 Aug 2017 13:14:17 +0000 (23:14 +1000)]
Merge branch 'topic/ppc-kvm' into next
Bring in the commit to rename find_linux_pte_or_hugepte() which touches
arch and KVM code, and might need to be merged with the kvmppc tree to
avoid conflicts.
Aneesh Kumar K.V [Thu, 27 Jul 2017 06:24:53 +0000 (11:54 +0530)]
powerpc/mm: Rename find_linux_pte_or_hugepte()
Add newer helpers to make the function usage simpler. It is always
recommended to use find_current_mm_pte() for walking the page table.
If we cannot use find_current_mm_pte(), it should be documented why
the said usage of __find_linux_pte() is safe against a parallel THP
split.
For now we have KVM code using __find_linux_pte(). This is because kvm
code ends up calling __find_linux_pte() in real mode with MSR_EE=0 but
with PACA soft_enabled = 1. We may want to fix that later and make
sure we keep the MSR_EE and PACA soft_enabled in sync. When we do that
we can switch kvm to use find_linux_pte().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Naveen N. Rao [Mon, 27 Mar 2017 19:37:41 +0000 (01:07 +0530)]
powerpc/bpf: Use memset32() to pre-fill traps in BPF page(s)
Use the newly introduced memset32() to pre-fill BPF page(s) with trap
instructions.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Naveen N. Rao [Mon, 27 Mar 2017 19:37:40 +0000 (01:07 +0530)]
powerpc/string: Implement optimized memset variants
Based on Matthew Wilcox's patches for other architectures.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Geoff Levand [Mon, 7 Aug 2017 20:09:20 +0000 (20:09 +0000)]
block/ps3vram: Check return of ps3vram_cache_init
Cc: Markus Elfring <elfring@users.sourceforge.net>
Cc: Jim Paris <jim@jtan.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Markus Elfring [Mon, 7 Aug 2017 20:09:20 +0000 (20:09 +0000)]
block/ps3vram: Delete an error message for a failed memory allocation in ps3vram_cache_init()
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: Jim Paris <jim@jtan.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Sam Bobroff [Thu, 17 Aug 2017 01:06:47 +0000 (11:06 +1000)]
selftests/powerpc: Improve tm-resched-dscr
The tm-resched-dscr self test can, in some situations, run for
several minutes before being successfully interrupted by the context
switch it needs in order to perform the test. This often seems to
occur when the test is being run in a virtual machine.
Improve the test by running it under eat_cpu() to guarantee
contention for the CPU and increase the chance of a context switch.
In practice this seems to reduce the test time, in some cases, from
more than two minutes to under a second.
Also remove the "progress dots" so that if the test does run for a
long time, it doesn't produce large amounts of unnecessary output.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Madhavan Srinivasan [Wed, 16 Aug 2017 16:21:34 +0000 (21:51 +0530)]
powerpc/perf: Fix usage of nest_imc_refc
nest_imc_refc is a reference count struct, used to track number of
active perf sessions using the nest units.
Currently the code accesses nest_imc_refc using node_id, which is
incorrect, the array is indexed by node number. Meaning in the case of
sparse node ids we index off the end of the array.
Fix it to use get_nest_pmu_ref() which uses the existing per-cpu
variable local_nest_imc_refc.
Fixes:
885dcd709ba91 ('powerpc/perf: Add nest IMC PMU support')
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Tweak change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Bhumika Goyal [Wed, 2 Aug 2017 18:07:38 +0000 (23:37 +0530)]
powerpc: Add const to bin_attribute structures
Declare bin_attribute structures as const as they are only passed as an
argument to the function sysfs_create_bin_file. This argument is of
type const, so declare the structure as const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Wed, 16 Aug 2017 06:01:18 +0000 (16:01 +1000)]
powerpc: Remove more redundant VSX save/tests
__giveup_vsx/save_vsx are completely equivalent to testing MSR_FP
and MSR_VEC and calling the corresponding giveup/save function so
just remove the spurious VSX cases. Also add WARN_ONs checking that
we never have VSX enabled without the two other.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Wed, 16 Aug 2017 06:01:17 +0000 (16:01 +1000)]
powerpc: Remove redundant clear of MSR_VSX in __giveup_vsx()
__giveup_fpu() already does it and we cannot have MSR_VSX set
without having MSR_FP also set.
This also adds a warning to check we indeed do
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Benjamin Herrenschmidt [Wed, 16 Aug 2017 06:01:16 +0000 (16:01 +1000)]
powerpc: Remove redundant FP/Altivec giveup code
__giveup_vsx() already calls those two functions.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>