OSDN Git Service
Zhihai Xu [Tue, 17 Dec 2013 03:20:52 +0000 (19:20 -0800)]
Crash pairing keyboard/mouse on N5
The crash is caused by read the source string out of bound.
Should limit the length to copy less than source string length.
should use the
MIN(SDP_DISC_ATTR_LEN(p_curr_attr->attr_len_type), SDP_MAX_ATTR_LEN);
as the length to copy.
bug:
12166360
Change-Id: I871d7dcaa8bf73aa27e9088417b35b677924bebd
Zhihai Xu [Mon, 16 Dec 2013 23:21:11 +0000 (23:21 +0000)]
Merge "RFCOMM: fix connection timeout during security setup"
kschulz [Tue, 5 Nov 2013 13:37:02 +0000 (14:37 +0100)]
RFCOMM: fix connection timeout during security setup
The RFC_T2_TIMEOUT used in rfc_mx_conf_cnf is replaced with RFCOMM_CONN_TIMEOUT,
increasing the timeout value from 20 sec to 120 sec.
Bug:
11523955
Change-Id: I992f3d20e9e4c6465850dcf1f52af0b7d39dd893
Kim Schulz [Mon, 23 Sep 2013 10:48:47 +0000 (12:48 +0200)]
fix for btsnoop log blogging HCI socket
Fix for bug
10887611 - btsnoop logging can block HCI socket for longer times.
- Removed the use of the same mutex as the receive queue.
- optimized the code (combined identical code pieces)
- added new function for writing to the log
- switched from using multiple write() calls to using a single writev() (to get atomicity).
patch-set 2:
- fixed review comments (overruns + warnings)
patch-set 3:
- fixed problem with non-matching flags for H4
Bug:
10887611
Change-Id: I16cc23a850093448309ec34c73d536b8571441e9
Zhihai Xu [Mon, 16 Dec 2013 22:22:36 +0000 (14:22 -0800)]
remove space.
bug:
10777562
Change-Id: I7560d4769dae2bc7b7796d0e7e133fa3cbd275c8
Zhihai Xu [Mon, 16 Dec 2013 22:16:04 +0000 (22:16 +0000)]
Merge "fixed problem with parsing GetAllCapabilitiesRsp"
Kim Schulz [Tue, 24 Sep 2013 14:01:44 +0000 (16:01 +0200)]
fixed problem with parsing GetAllCapabilitiesRsp
The check for GetAllCapabilitiesRsp was not correctly parsed and hence the qualification tests TP/SIG/SMG/BI-35-C and TP/SIG/SMG/BI-36-C could not be passed.
This fixes that problem and makes it comply with the spec.
Bug:
10906942
Change-Id: I8b46c1974b4cad13d5a6641e02bf8a5f2ebc8ebd
Kim Schulz [Mon, 16 Sep 2013 13:59:33 +0000 (15:59 +0200)]
Fixes for problems found with coverity analyzer
- fixed UNINITIALIZED variable (hdl) in bta_hh_act.c :220
- fixed possible RESOURCE LEAK in btif_config_util.cpp in relation to open_file_map() if file is fd size=0
- fixed possible RESOURCE LEAK in create_socket_server() in uipc:196 (s not closed)
- fixed possible OVERRUN in l2c_csm.c, (l2c_csm_config), array "l2cb.fixed_reg" of 4 20-byte elements at element index 60 (byte offset 1200) using index "p_ccb->local_cid - 3" (which evaluates to 60)
- fixed possible OVERRUN in btm_pm.c, (btm_pm_reset) array "btm_cb.acl_db" of 7 288-byte elements at element index 7 (byte offset 2016) using index "btm_cb.pm_pend_link" (which evaluates to 7).
- fixed possible OVERRUN in btif_storage.c, (btif_storage_add_device_to_autopair_blacklist) array "input_value" of 20 bytes by passing it to a function which accesses it at byte offset 20 using argument "20U".
patch set 2:
- fixed {}
Patch set 3:
- fixed review commment in stack/btm/btm_pm.c:379
bug:
10777562
Change-Id: I2a6d57f93acaaf9b25c49a6a29cb60d0e1e3c5d8
Zhihai Xu [Mon, 16 Dec 2013 21:48:22 +0000 (21:48 +0000)]
Merge " the HID device state is out of sync after upair."
Zhihai Xu [Sat, 16 Nov 2013 05:18:25 +0000 (21:18 -0800)]
the HID device state is out of sync after upair.
the HID device state is out of sync between java layer and bluedroid stack after upair.
This will cause the HID device can't be connected after repair.
YOu can find the following error message
E/HidService( 1452): Hid Device not disconnected: 00:15:9E:20:29:41
bug:
11718702
Change-Id: I271bb77a2cc205c5a0ef396db86b87902d29966b
Zhihai Xu [Mon, 16 Dec 2013 21:36:21 +0000 (21:36 +0000)]
Merge "fix a potential native crash during bluetooth sutdown"
Zhihai Xu [Tue, 26 Nov 2013 01:30:59 +0000 (17:30 -0800)]
fix a potential native crash during bluetooth sutdown
When bluetooth is initialized which call gki_buffer_init,
the buffer pool is allocated by GKI_os_malloc which is
to call libc malloc function.
When bluetooth is cleanup which call GKI_shutdown,
the buffer pool will be freed by GKI_os_free
which is to call libc free function.
So if we access the buffer, after the whole buffer pool is freed,
we will get this native crash.
if we call cleanup during bluetooth disabling:
the state is still BTIF_CORE_STATE_DISABLING,
then GKI_shutdown will call before bte_main_disable
( bt_hc_if->cleanup();), which is before userial thread exit.
Then we may trigger this native crash.
bug:
11793775
Change-Id: Ic8ced12848d25f918a28f4d5ba29b803d6ac5bd7
Zhihai Xu [Mon, 16 Dec 2013 21:26:52 +0000 (21:26 +0000)]
Merge "implement flow control to avoid dropping packets in btif_media_task."
Zhihai Xu [Thu, 19 Sep 2013 18:30:44 +0000 (11:30 -0700)]
implement flow control to avoid dropping packets in btif_media_task.
implment flow conrol to save CPU usage and avoid dropping
packet in btif_media_task when overflow and cpu preemption happen.
when the packet count in the queue is above high watermark, we will
stopping adding packets, when the packet count in the queue is below
low watermark, we will start adding packets again.
bug:
8252054
Change-Id: I3b7795dffbe5f2ae455e239a0234533f6cbb4403
Zhihai Xu [Mon, 16 Dec 2013 21:21:25 +0000 (21:21 +0000)]
Merge "should return correct length and use shorter poll time for ad2p data"
Zhihai Xu [Mon, 16 Sep 2013 02:59:37 +0000 (19:59 -0700)]
should return correct length and use shorter poll time for ad2p data
the default poll timeout(100ms) is too long for a2dp data read,
because the a2dp timer pertiod to read data is 20ms. The poll timeout
should be far less than a2dp timer pertiod. also when poll timeout happen
for read, we should return the data length which we already read instead of 0.
bug:
8252054
Change-Id: Ifa8587c6b7d127cbbbff76d9e20b630303b6379f
Zhihai Xu [Thu, 12 Dec 2013 01:21:53 +0000 (01:21 +0000)]
Merge "Bluetooth does not provide unique identifier for HID devices"
Zhihai Xu [Wed, 11 Dec 2013 19:46:36 +0000 (11:46 -0800)]
Bluetooth does not provide unique identifier for HID devices
use remote device MAC address as the ID in uhid device.
make the format backward compatible with BlueZ.
bug:
12083633
Change-Id: I6edfe94e67b806dbb68820e0ce5582ad3c04753f
Zhihai Xu [Wed, 11 Dec 2013 19:21:10 +0000 (19:21 +0000)]
Merge "set HID major in class of device of inquiry result for HID over LE"
Zhihai Xu [Wed, 27 Nov 2013 02:18:29 +0000 (18:18 -0800)]
set HID major in class of device of inquiry result for HID over LE
need to set HID major in class of device of inquiry result for HID over LE,
if HID over LE service UUID is found in BLE advertisement data.
so we can show the HID icon in device list for HID over LE device.
16 bit UUID list in BLE advertisement data can contain multiple UUID,
need to go through the 16bit UUID list to find HID over LE service UUID.
bug:
11450485
Change-Id: I7b2ee4c88485b287609eac34c35ce5e714e48280
Zhihai Xu [Wed, 11 Dec 2013 19:07:28 +0000 (19:07 +0000)]
Merge "BLE HID device connection failure due to security error."
Zhihai Xu [Wed, 13 Nov 2013 04:18:37 +0000 (20:18 -0800)]
BLE HID device connection failure due to security error.
When HID BLE device start encryption, if some other GATT application
already start encryption(but not finished yet) by calling
gatt_security_check_start. The HID BLE device will be failed to start
encryption, which will cause it to disconnect the BLE HID connection.
The solution is to check whether we already started the encryption
, If the encryption is already started, wait until the encryption
finished, then continue to start security check for BLE HID device.
add encrytion complete event to notify all GATT client encryption done.
filter the event just for BTA HH LE GATT client.
bug:
11636246
Change-Id: If58e57c623cc8cfa05208587b010bec68c71306c
Zhihai Xu [Fri, 6 Dec 2013 22:29:29 +0000 (14:29 -0800)]
use bluetooth HID remote device name as input device name.
bug:
12003067
Change-Id: I74e4921047a27ee79fa1e3cd58056fde2958e60f
Zhihai Xu [Fri, 6 Dec 2013 01:35:41 +0000 (01:35 +0000)]
Merge "Remove the device from le backgrond connection whitelist when it's unpaired"
Zhihai Xu [Sat, 16 Nov 2013 01:55:46 +0000 (17:55 -0800)]
Remove the device from le backgrond connection whitelist when it's unpaired
this is due to we didn't remove the device from the white list before unpair
Which cause a fake pair request from remote device triggered
right after the acl is disconnected.
The fix is to remove the BLE device from whitelist before unpair.
Also fix a problem return wrong device handle from bta_hh_le_add_device.
if bta_hh_le_add_device is called right after reboot, before we connect HID device.
This is normally true for a previous paired device, which we saved in the nvram.
The wrong device handle will cause the removing HID device from while list failed
after unpair the HID device.
bug:
11676338
Change-Id: Id5b45b2829da9a990dfd1dbae0c15764b16c2bfb
Zhihai Xu [Fri, 6 Dec 2013 01:32:48 +0000 (01:32 +0000)]
Merge "BLE Secuity manager state machine generate wrong pairing success event."
Zhihai Xu [Sat, 16 Nov 2013 02:57:28 +0000 (18:57 -0800)]
BLE Secuity manager state machine generate wrong pairing success event.
we call smp_proc_release_delay to setup a timer.
We will send a pair failure message to uplayer after the time expired.
Right before the time expire, the l2cap connection is disconnected
from remote device, we receive L2C_DISC, which will call smp_delay_terminate,
smp_delay_terminate will send a pair success message to uplayer.
The fix is not to change the status if the remote device disconnect the link
bug:
11716967
Change-Id: I8ca63599a170ec86913785aafea552301cec37df
Zhihai Xu [Fri, 6 Dec 2013 01:30:14 +0000 (01:30 +0000)]
Merge "Duplicate pair request are generated in BLE SMP."
Zhihai Xu [Sat, 16 Nov 2013 03:16:26 +0000 (19:16 -0800)]
Duplicate pair request are generated in BLE SMP.
SMP_SEC_REQUEST_EVT will trigger pair request for user permission.
Due to callback event isn't cleared, duplicate pare request is generated.
The fix is to clear the callback event after grant the permission for the pair request.
To avoid reporting duplicae SMP_SEC_REQUEST_EVT.
bug:
11716879
Change-Id: I90805caa6f5360f8d64edfb711703e0e05863ea4
Zhihai Xu [Sun, 17 Nov 2013 01:07:38 +0000 (17:07 -0800)]
sometime the BLE connection parameter isnot updated for the first time
When we receive the BLE connection parameter update
from remote device after smp_send_pair_req before
start BLE service discovery(bta_gattc_set_discover_st).
We will miss update this BLE connection parameter.
The reason is we call
L2CA_EnableUpdateBleConnParams(p_cb->pairing_bda, FALSE);
in smp_send_pair_req ,We change the state to UPD_DISABLED.
When we receive the new BLE connection parameter from
remote device, we will update the state to UPD_PENDING,
which will update the new connection parameter
when enable the connection parameter update.
when we start BLE service discovery
we call L2CA_EnableUpdateBleConnParams(p_srcb->server_bda, FALSE);
in bta_gattc_set_discover_st, We will update the state back to
UPD_DISABLED, which will cause we miss updating
the new connection parameter when enable the connection parameter update.
The fix is don't change the state to UPD_DISABLED
when the state is UPD_PENDING for disabling.
bug:
11727252
Change-Id: I953b9ca669e3460e18b340e7779cc54e03d6305b
Zhihai Xu [Tue, 3 Dec 2013 23:21:02 +0000 (23:21 +0000)]
Merge "Pairing with dissapeard HID decive never times out (in UI)"
Kim Schulz [Mon, 30 Sep 2013 08:55:52 +0000 (10:55 +0200)]
Pairing with dissapeard HID decive never times out (in UI)
- added function to notify the UI about failed HID pairing
patch set2:
- added function header
patch set3:
- break long line
Bug:
10998578
Change-Id: I7314bf07da7ebac7252c6902d987fbca20da2abc
Zhihai Xu [Tue, 3 Dec 2013 23:16:38 +0000 (23:16 +0000)]
Merge "Copy paste error in HDP source/sink check"
Kim Schulz [Mon, 30 Sep 2013 06:51:19 +0000 (08:51 +0200)]
Copy paste error in HDP source/sink check
- fixed copy paste error in sdp_api.c
Bug:
10998127
Change-Id: Icffdf04630777badf76ed46a3e203000df6ecc9f
Zhihai Xu [Tue, 3 Dec 2013 23:13:21 +0000 (23:13 +0000)]
Merge "fixed assignment with no effect"
Kim Schulz [Mon, 30 Sep 2013 07:07:04 +0000 (09:07 +0200)]
fixed assignment with no effect
a variable was wrongfully assigned to itself insted.
Bug:
10998131
Change-Id: Ia563e9f8aa43e264a6664d81d917b7517e1c89b5
Zhihai Xu [Tue, 3 Dec 2013 23:10:18 +0000 (23:10 +0000)]
Merge "Fixed wrong operator in uipc.c that cause always true check"
Kim Schulz [Mon, 30 Sep 2013 07:23:23 +0000 (09:23 +0200)]
Fixed wrong operator in uipc.c that cause always true check
- changed from using logical OR to using logical AND
Bug:
10998096
Change-Id: Idf15dbc1c605c94094b79137a4075040fe9bcf0b
Kim Schulz [Tue, 24 Sep 2013 13:11:05 +0000 (15:11 +0200)]
memset arguments wrongfully swapped
the arguments for one of the memset calls was wrong.
Bug:
10907215
Change-Id: Ie00a3a6b829b99fd94659a764b6f0309684d9303
Matthew Xie [Tue, 12 Nov 2013 03:01:23 +0000 (19:01 -0800)]
am
46ebeb1d: Merge "LE: Increase number of simultaneous connections" into klp-dev
* commit '
46ebeb1d5f2536445590d142f01247de4e24893c':
LE: Increase number of simultaneous connections
Matthew Xie [Tue, 12 Nov 2013 02:56:19 +0000 (02:56 +0000)]
Merge "LE: Increase number of simultaneous connections" into klp-dev
Andre Eisenbach [Fri, 1 Nov 2013 21:47:52 +0000 (14:47 -0700)]
LE: Increase number of simultaneous connections
Currently the maximum number of parallel connections is 4. This patch
increases the limit to allow for more devices.
bug
11571899
Change-Id: I42b77e6b67f59d7d430d879a5fb0eb80982160b5
Zhihai Xu [Mon, 11 Nov 2013 23:09:29 +0000 (15:09 -0800)]
am
72658f48: BLE is disconnected due to BLE service record discovery failure.
* commit '
72658f48d653be0786ef924bb3abbf7df1ec6592':
BLE is disconnected due to BLE service record discovery failure.
Zhihai Xu [Mon, 11 Nov 2013 01:25:45 +0000 (17:25 -0800)]
BLE is disconnected due to BLE service record discovery failure.
the root cause of the problem is:
In BLE GATT client state machine, When It is in discovery state,
any command to access the service, characteristic and descriptor
will be queued, these commands will be executed after BLE service
discovery complete. When we queue the command, we will copy these
message. The problem is we didn't copy these message correctly.
We didn't deep copy these messages. There are pointers inside
these messages. These pointers are still point to the old message
which are already freed. When the messages are reused, the original
content will lost. The queued commands will be corrupted.
This is very serious issue, which can cause a lot of stability problem.
bug:
11620252
Change-Id: I93082a9dbcc3a676f5f791c2b1ea98e49b165813
Matthew Xie [Fri, 8 Nov 2013 19:35:20 +0000 (11:35 -0800)]
am
dbba0e65: Replace Broadcom proprietary license header with apache 2 header
* commit '
dbba0e652e0ce23dd691df3c03979ec6e32c8db3':
Replace Broadcom proprietary license header with apache 2 header
Matthew Xie [Fri, 8 Nov 2013 18:13:21 +0000 (10:13 -0800)]
Replace Broadcom proprietary license header with apache 2 header
bug
11591406
Change-Id: Ibb9c6b3865e6d757236f1c5896775bb6f28e47be
Matthew Xie [Thu, 7 Nov 2013 19:12:13 +0000 (11:12 -0800)]
am
04e05e9a: Merge "LE: Add devices to the inquiry db before connecting" into klp-dev
* commit '
04e05e9a39cbed22a099458c35207795a0039043':
LE: Add devices to the inquiry db before connecting
Matthew Xie [Thu, 7 Nov 2013 19:06:39 +0000 (19:06 +0000)]
Merge "LE: Add devices to the inquiry db before connecting" into klp-dev
Zhihai Xu [Thu, 7 Nov 2013 19:05:40 +0000 (11:05 -0800)]
am
dfd036d9: Merge "fix a memory leakage when Queue search or discovery event." into klp-dev
* commit '
dfd036d96a745af198a532748a600d0c4d6ab1f4':
fix a memory leakage when Queue search or discovery event.
Zhihai Xu [Thu, 7 Nov 2013 19:00:17 +0000 (19:00 +0000)]
Merge "fix a memory leakage when Queue search or discovery event." into klp-dev
Andre Eisenbach [Thu, 7 Nov 2013 07:35:48 +0000 (23:35 -0800)]
LE: Add devices to the inquiry db before connecting
Ensure that the remote device type is set correctly by reading the
device information from non-volatile storage and (re-)adding it to
the inquiry database before connecting to a remote GATT device.
bug
11573208
Change-Id: Ifa69da3d5871aed5293ea5e611144874b67afe72
Zhihai Xu [Thu, 7 Nov 2013 03:23:13 +0000 (19:23 -0800)]
fix a memory leakage when Queue search or discovery event.
bug:
11562902
Change-Id: I16ba8cfb727d05e5d324c6301ba0ab23e729232b
Zhihai Xu [Thu, 7 Nov 2013 03:11:57 +0000 (19:11 -0800)]
am
c04aadc3: Merge "Fixes random host disconnection after establishing connection" into klp-dev
* commit '
c04aadc3d5925fa499aa0449f4e94a04308480ea':
Fixes random host disconnection after establishing connection
Zhihai Xu [Thu, 7 Nov 2013 03:06:33 +0000 (03:06 +0000)]
Merge "Fixes random host disconnection after establishing connection" into klp-dev
Sunny Kapdi [Wed, 7 Aug 2013 19:30:20 +0000 (12:30 -0700)]
Fixes random host disconnection after establishing connection
Host starts encryption twice when the remote device is
already paired. The host sends disconnect when the
second encryption attempt returns failure. This fix
avoids duplicate encryption attempt.
bug:
11450719
Change-Id: I8ec5c4a953180ec17585aece757810421bc44aae
Matthew Xie [Thu, 7 Nov 2013 00:11:44 +0000 (16:11 -0800)]
am
6088d83d: Merge "whitelist well tested devices for absolute volume feature" into klp-dev
* commit '
6088d83d6ce30275b15fd0e5955a83f709f03172':
whitelist well tested devices for absolute volume feature
Matthew Xie [Thu, 7 Nov 2013 00:05:25 +0000 (00:05 +0000)]
Merge "whitelist well tested devices for absolute volume feature" into klp-dev
Matthew Xie [Wed, 6 Nov 2013 01:19:39 +0000 (17:19 -0800)]
whitelist well tested devices for absolute volume feature
We are blacklisting all the devices that are not in whitelist
instead of blacklisting known bad devices.
bug
11124170
Change-Id: I044970df611d2a800d7698d4a63331644ab107ce
Zhihai Xu [Wed, 6 Nov 2013 06:58:02 +0000 (22:58 -0800)]
am
29fdb17a: Merge "need to save the BLE HID UUID to NVRAM" into klp-dev
* commit '
29fdb17a232f45c5550e7fa8d773f87e06ac58f1':
need to save the BLE HID UUID to NVRAM
Zhihai Xu [Wed, 6 Nov 2013 06:54:58 +0000 (06:54 +0000)]
Merge "need to save the BLE HID UUID to NVRAM" into klp-dev
Zhihai Xu [Wed, 6 Nov 2013 02:06:54 +0000 (18:06 -0800)]
need to save the BLE HID UUID to NVRAM
need to save the BLE HID UUID to NVRAM.
otherwise we will miss the HID profile setting
in device profile list of the BLE HID device after reboot.
bug:
11541617
Change-Id: I11e1c871768e999ec1f48396018c3be379cc1b7d
Matthew Xie [Wed, 6 Nov 2013 02:02:49 +0000 (18:02 -0800)]
am
8fb6973d: Merge "Add toyota venza to the auto pair blacklist" into klp-dev
* commit '
8fb6973d0988a91f7debfddd7dfb79a730138f52':
Add toyota venza to the auto pair blacklist
Matthew Xie [Wed, 6 Nov 2013 01:25:24 +0000 (01:25 +0000)]
Merge "Add toyota venza to the auto pair blacklist" into klp-dev
Matthew Xie [Tue, 5 Nov 2013 05:55:07 +0000 (21:55 -0800)]
am
e38180dc: Merge "Bluetooth: Send Error for Invalid AT Command." into klp-dev
* commit '
e38180dc7880e5aea76637138661d54bcd9cf875':
Bluetooth: Send Error for Invalid AT Command.
Zhihai Xu [Tue, 5 Nov 2013 05:53:53 +0000 (21:53 -0800)]
am
2003ec03: Merge "A typo to set wrong max connection interval value when we create a BLE connection." into klp-dev
* commit '
2003ec03dbf7c82cdb655fa64746397a1e775cc0':
A typo to set wrong max connection interval value when we create a BLE connection.
Zhihai Xu [Tue, 5 Nov 2013 05:53:20 +0000 (21:53 -0800)]
am
cd9ceb9f: Merge "Unable to connect to a Motorola s705 until Bluetooth was toggled of and back on" into klp-dev
* commit '
cd9ceb9f48d633b68570e5f70768475c8fe93af1':
Unable to connect to a Motorola s705 until Bluetooth was toggled of and back on
Sunny Kapdi [Tue, 5 Nov 2013 05:53:19 +0000 (21:53 -0800)]
am
7a5c5910: Fixes BLE HCI commands concurrency issue
* commit '
7a5c5910c1df73ab86e57d18c4e6e35a623d98ce':
Fixes BLE HCI commands concurrency issue
Matthew Xie [Mon, 4 Nov 2013 22:11:14 +0000 (22:11 +0000)]
Merge "Bluetooth: Send Error for Invalid AT Command." into klp-dev
Zhihai Xu [Sun, 3 Nov 2013 03:42:28 +0000 (03:42 +0000)]
Merge "A typo to set wrong max connection interval value when we create a BLE connection." into klp-dev
Sunny Kapdi [Mon, 29 Jul 2013 05:29:37 +0000 (10:59 +0530)]
Bluetooth: Send Error for Invalid AT Command.
Some Headsets send HFP 1.6 cmds even when it is not
supported by DUT.Send error response in those cases.
bug
11450717
Change-Id: If7745959c00fd49bd737b41a49adba9e726aa5c7
Zhihai Xu [Sat, 2 Nov 2013 00:09:49 +0000 (00:09 +0000)]
Merge "Unable to connect to a Motorola s705 until Bluetooth was toggled of and back on" into klp-dev
Zhihai Xu [Fri, 25 Oct 2013 23:47:49 +0000 (16:47 -0700)]
A typo to set wrong max connection interval value when we create a BLE connection.
when we set the max connection interval value,
we should use BTM_BLE_CONN_INT_MAX_DEF instead of BTM_BLE_CONN_INT_MIN
bug:
11390678
Change-Id: Ia3f6d5e9cb91b2e998d014ed4849eff8455af770
Sunny Kapdi [Wed, 14 Aug 2013 02:43:49 +0000 (19:43 -0700)]
Fixes BLE HCI commands concurrency issue
Removes HCI LE Read Remote features command call
to prevent the concurrency between this command and
HCI LE start encryption command.
CRs-fixed: 517330
bug:
11450568
Change-Id: I6445ab8095a4261c2a3f84acea1c546e6924f50d
Signed-off-by: Sunny Kapdi <sunnyk@codeaurora.org>
Matthew Xie [Tue, 29 Oct 2013 22:55:49 +0000 (15:55 -0700)]
am
41e761b1: Merge "Treat devices advertising random addr. as LE only" into klp-dev
* commit '
41e761b106b50eb6bf08ae6a027bf27486b571cc':
Treat devices advertising random addr. as LE only
Matthew Xie [Tue, 29 Oct 2013 22:51:35 +0000 (22:51 +0000)]
Merge "Treat devices advertising random addr. as LE only" into klp-dev
Andre Eisenbach [Fri, 25 Oct 2013 23:17:45 +0000 (16:17 -0700)]
Treat devices advertising random addr. as LE only
Some remote devices use random addresses, but are not setting the
"BR/EDR not supported" flag. Thus we try to connect to the device using
BR/EDR.
This patch ignores the ADV flags if the device is using a random
address and always makes the connection over the LE transport.
bug
11418071
Change-Id: I628775b819abd8f17745aaf98db4bb3c59166955
Matthew Xie [Thu, 24 Oct 2013 23:18:24 +0000 (16:18 -0700)]
am
93449a36: Merge "Blacklist Devices that donot handle absolute volume well" into klp-dev
* commit '
93449a36de3b17e95f442ebd49614fa30707cbbb':
Blacklist Devices that donot handle absolute volume well
Matthew Xie [Thu, 24 Oct 2013 23:05:57 +0000 (23:05 +0000)]
Merge "Blacklist Devices that donot handle absolute volume well" into klp-dev
Matthew Xie [Thu, 24 Oct 2013 08:09:52 +0000 (01:09 -0700)]
Blacklist Devices that donot handle absolute volume well
Use vendor prefix address, include hbs730 headset, passat carkit
bug
11124170
Change-Id: I80f634366ce332c55581d7b1e36641e5ce3ad346
Zhihai Xu [Thu, 24 Oct 2013 01:33:21 +0000 (18:33 -0700)]
am
03d68523: Merge "Do not deregister HH GATT IF in bta_gattc_disable for hid over GATT" into klp-dev
* commit '
03d685233071eb9faa390f85869775d1058a0279':
Do not deregister HH GATT IF in bta_gattc_disable for hid over GATT
Zhihai Xu [Thu, 24 Oct 2013 01:25:32 +0000 (01:25 +0000)]
Merge "Do not deregister HH GATT IF in bta_gattc_disable for hid over GATT" into klp-dev
Zhihai Xu [Wed, 23 Oct 2013 23:42:38 +0000 (16:42 -0700)]
am
cbd63326: Merge "LE: Only prepend valid HID report IDs" into klp-dev
* commit '
cbd63326930172f8b336a6e56f10eb8cfc9e8646':
LE: Only prepend valid HID report IDs
Zhihai Xu [Wed, 23 Oct 2013 23:33:31 +0000 (23:33 +0000)]
Merge "LE: Only prepend valid HID report IDs" into klp-dev
Zhihai Xu [Tue, 22 Oct 2013 22:26:33 +0000 (15:26 -0700)]
Do not deregister HH GATT IF in bta_gattc_disable for hid over GATT
The root cause is bta_gattc_disable de-register the HH GATT IF
which cause bta_hh_cleanup_disable called
before we receive BTA_HH_INT_CLOSE_EVT.
The fix is "don't deregister HH GATT IF in bta_gattc_disable and
let HH module to de-register the HH GATT IF by bta_hh_le_deregister".
because HH GATT IF is a special GATT IF
which won't be exposed to uplayer and
HH GATT IF belong to BTA HH module, it should be managed by BTA HH.
bug:
11284861
Change-Id: Ia14cd2be3f3548a4d1e2dcfbc89fa3a75d9651db
Andre Eisenbach [Tue, 22 Oct 2013 14:49:45 +0000 (07:49 -0700)]
LE: Only prepend valid HID report IDs
If a remote HOGP device does not supply a valid report ID, do not
prepend it to the HID report.
This fixes interop issues with various LE mice, where the cursor would
not move on screen as expected.
BLTH02618447
Bug:
11342157
Change-Id: I7832bb091654a5625f37b1531bd80fad9bbe6a51
Matthew Xie [Sun, 20 Oct 2013 18:38:37 +0000 (11:38 -0700)]
am
926267d2: Merge "Handle CL opening state in bta_jv_free_rfc_cb" into klp-dev
* commit '
926267d2240595fdc638176a7c6aa9e532fa179f':
Handle CL opening state in bta_jv_free_rfc_cb
Matthew Xie [Sun, 20 Oct 2013 18:32:32 +0000 (18:32 +0000)]
Merge "Handle CL opening state in bta_jv_free_rfc_cb" into klp-dev
Matthew Xie [Sun, 20 Oct 2013 08:04:06 +0000 (01:04 -0700)]
Handle CL opening state in bta_jv_free_rfc_cb
When the local device is openning an rfc channel and is being closed
before it's opened, we should close the channel instead of ignoring.
bug
11299049
Change-Id: I702500d489c8b3d3764e36340106433232a127c0
Zhihai Xu [Fri, 18 Oct 2013 00:16:45 +0000 (17:16 -0700)]
am
0c2e29d5: BTU SIGSEGV on RFCOMM connect to Linux bluetooth dongle
* commit '
0c2e29d5ae7cfd154c790703886d361708b02bbc':
BTU SIGSEGV on RFCOMM connect to Linux bluetooth dongle
Zhihai Xu [Thu, 17 Oct 2013 03:00:38 +0000 (20:00 -0700)]
BTU SIGSEGV on RFCOMM connect to Linux bluetooth dongle
fix a typo which cause the crash.
bug:
11260131
Change-Id: I1cbe9f4d20be39f3ca13577687ac92b88b06e366
zzy [Sun, 13 Oct 2013 19:49:35 +0000 (12:49 -0700)]
am
031d239b: When rfcomm incoming queue is not empty, waiting for app ready to drain the data
* commit '
031d239b408618294a5980cb3933e03e185f96cf':
When rfcomm incoming queue is not empty, waiting for app ready to drain the data
zzy [Tue, 8 Oct 2013 23:54:08 +0000 (16:54 -0700)]
When rfcomm incoming queue is not empty, waiting for app ready to drain the data
Fixed the issue that rfcomm inbound packets could be out of order when host
flow control is activating.
bug
11031800
Change-Id: Idc1eb6633bb070f1ab2b33a9751fd7d714764d45
Zhihai Xu [Mon, 7 Oct 2013 22:11:22 +0000 (15:11 -0700)]
Unable to connect to a Motorola s705 until Bluetooth was toggled of and back on
we should use the same role as the previous connection, if phone walk out of range,
and reconnect back from remote device.
bug:
10648781
Change-Id: I6abd77067d26769067ba2fbd45d9e8f75cf7c764
Matthew Xie [Thu, 10 Oct 2013 01:02:21 +0000 (18:02 -0700)]
am
65b8e0f3: Merge "Remove MMS support from MAP SDP" into klp-dev
* commit '
65b8e0f360f7fe7be001087c899eebc507115f9d':
Remove MMS support from MAP SDP
Matthew Xie [Thu, 10 Oct 2013 00:46:15 +0000 (00:46 +0000)]
Merge "Remove MMS support from MAP SDP" into klp-dev
Matthew Xie [Wed, 9 Oct 2013 23:47:45 +0000 (16:47 -0700)]
am
6b728e41: Merge "Interleave br/edr device discovery with BLE device scan for some targets" into klp-dev
* commit '
6b728e412c22549ef51c19315ccf9ab3b7e16885':
Interleave br/edr device discovery with BLE device scan for some targets
Matthew Xie [Wed, 9 Oct 2013 23:40:09 +0000 (23:40 +0000)]
Merge "Interleave br/edr device discovery with BLE device scan for some targets" into klp-dev
Matthew Xie [Mon, 30 Sep 2013 19:44:10 +0000 (12:44 -0700)]
Interleave br/edr device discovery with BLE device scan for some targets
This change only applies to targets which do not support interleaved scan
in controller.
bug
8508849
Change-Id: Ia99faf92c942b4b33abfde2708eff25ec9cd5468
zzy [Wed, 9 Oct 2013 22:24:05 +0000 (15:24 -0700)]
am
7939ed0c: added filter remove api to control the # of child node for bt_config.xml
* commit '
7939ed0c9a50c769e9e648a2d7751e0894b485ed':
added filter remove api to control the # of child node for bt_config.xml
zzy [Sat, 28 Sep 2013 00:05:37 +0000 (17:05 -0700)]
added filter remove api to control the # of child node for bt_config.xml
Bug
10949832
Change-Id: I10589b9d0a0b4b8d7cbf66122c66bb2e99be04a1