jfs: fix bogus variable self-initialization

[ Upstream commit a5fdd713d256887b5f012608701149fa939e5645 ]

A statement was originally added in 2006 to shut up a gcc warning,
now but now clang warns about it:

fs/jfs/jfs_txnmgr.c:1932:15: error: variable 'pxd' is uninitialized when used within its own initialization
      [-Werror,-Wuninitialized]
                pxd_t pxd = pxd;        /* truncated extent of xad */
                      ~~~   ^~~

Modern versions of gcc are fine without the silly assignment, so just
drop it. Tested with gcc-4.6 (released 2011), 4.7, 4.8, and 4.9.

Fixes: c9e3ad6021e5 ("JFS: Get rid of "may be used uninitialized" warnings")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccree - reduce kernel stack usage with clang

[ Upstream commit 5db46ac29a6797541943d3c4081821747e342732 ]

Building with clang for a 32-bit architecture runs over the stack
frame limit in the setkey function:

drivers/crypto/ccree/cc_cipher.c:318:12: error: stack frame size of 1152 bytes in function 'cc_cipher_setkey' [-Werror,-Wframe-larger-than=]

The problem is that there are two large variables: the temporary
'tmp' array and the SHASH_DESC_ON_STACK() declaration. Moving
the first into the block in which it is used reduces the
total frame size to 768 bytes, which seems more reasonable
and is under the warning limit.

Fixes: 63ee04c8b491 ("crypto: ccree - add skcipher support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-By: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: tps65086: Fix tps65086_ldoa1_ranges for selector 0xB

[ Upstream commit e69b394703e032e56a140172440ec4f9890b536d ]

selector 0xB (1011) should be 2.6V rather than 2.7V, fit ix.

Table 5-4. LDOA1 Output Voltage Options
VID Bits VOUT VID Bits VOUT VID Bits VOUT VID Bits VOUT
0000     1.35 0100     1.8  1000     2.3  1100     2.85
0001     1.5  0101     1.9  1001     2.4  1101     3.0
0010     1.6  0110     2.0  1010     2.5  1110     3.3
0011     1.7  0111     2.1  1011     2.6  1111     Not Used

Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cx23885: check allocation return

[ Upstream commit a3d7f22ef34ec4206b50ee121384d5c8bebd5591 ]

Checking of kmalloc() seems to have been committed - as
cx23885_dvb_register() is checking for != 0 return, returning
-ENOMEM should be fine here.  While at it address the coccicheck
suggestion to move to kmemdup rather than using kmalloc+memcpy.

Fixes: 46b21bbaa8a8 ("[media] Add support for DViCO FusionHDTV DVB-T Dual Express2")

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: wl128x: Fix an error code in fm_download_firmware()

[ Upstream commit ef4bb63dc1f7213c08e13f6943c69cd27f69e4a3 ]

We forgot to set "ret" on this error path.

Fixes: e8454ff7b9a4 ("[media] drivers:media:radio: wl128x: FM Driver Common sources")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cx18: update *pos correctly in cx18_read_pos()

[ Upstream commit 7afb0df554292dca7568446f619965fb8153085d ]

We should be updating *pos.  The current code is a no-op.

Fixes: 1c1e45d17b66 ("V4L/DVB (7786): cx18: new driver for the Conexant CX23418 MPEG encoder chip")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ivtv: update *pos correctly in ivtv_read_pos()

[ Upstream commit f8e579f3ca0973daef263f513da5edff520a6c0d ]

We had intended to update *pos, but the current code is a no-op.

Fixes: 1a0adaf37c30 ("V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: amlogic: gx-socinfo: Add mask for each SoC packages

[ Upstream commit dce47aed20c7de3ee2011b7a63e67f08e9dcfb5e ]

When updated IDs on f842c41adc04 ("amlogic: meson-gx-socinfo: Update soc ids")
we introduced packages ids using the full 8bit value, but in the function
socinfo_to_package_id() the id was filtered with the 0xf0 mask.

While the 0xf0 mask is valid for most board, it filters out the lower
4 bits which encodes some characteristics of the chip.

This patch moves the mask into the meson_gx_package_id table to be applied
on each package name independently and add the correct mask for some
specific entries.

An example is the S905, in the vendor code the S905 is package_id
different from 0x20, and S905M is exactly 0x20.

Another example are the The Wetek Hub & Play2 boards using a S905-H
variant, which is the S905 SoC with some licence bits enabled.
These licence bits are encoded in the lower 4bits, so to detect
the -H variant, we must detect the id == 0x3 with the 0xf mask.

Fixes: f842c41adc04 ("amlogic: meson-gx-socinfo: Update soc ids")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: lp87565: Fix missing register for LP87565_BUCK_0

[ Upstream commit d1a6cbdf1e597917cb642c655512d91b71a35d22 ]

LP87565_BUCK_0 is missed, fix it.

Fixes: f0168a9bf ("regulator: lp87565: Add support for lp87565 PMIC regulators")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sh_eth: fix a missing check of of_get_phy_mode

[ Upstream commit 035a14e71f27eefa50087963b94cbdb3580d08bf ]

of_get_phy_mode may fail and return a negative error code;
the fix checks the return value of of_get_phy_mode and
returns NULL of it fails.

Fixes: b356e978e92f ("sh_eth: add device tree support")
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: IPoIB, Fix RX checksum statistics update

[ Upstream commit 3d6f3cdf9bfe92c430674308db0f1c8655f2c11d ]

Update the RX checksum only if the feature is enabled.

Fixes: 9d6bd752c63c ("net/mlx5e: IPoIB, RX handler")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Fix multiple updates of steering rules in parallel

[ Upstream commit 6237634d8fcc65c9e3348382910e7cdb15084c68 ]

There might be a condition where the fte found is not active yet. In
this case we should not use it, but continue to search for another, or
allocate a new one.

Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen, cpu_hotplug: Prevent an out of bounds access

[ Upstream commit 201676095dda7e5b31a5e1d116d10fc22985075e ]

The "cpu" variable comes from the sscanf() so Smatch marks it as
untrusted data.  We can't pass a higher value than "nr_cpu_ids" to
cpu_possible() or it results in an out of bounds access.

Fixes: d68d82afd4c8 ("xen: implement CPU hotplugging")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/rapidio/rio_cm.c: fix potential oops in riocm_ch_listen()

[ Upstream commit 5ac188b12e7cbdd92dee60877d1fac913fc1d074 ]

If riocm_get_channel() fails, then we should just return -EINVAL.
Calling riocm_put_channel() will trigger a NULL dereference and
generally we should call put() if the get() didn't succeed.

Link: http://lkml.kernel.org/r/20190110130230.GB27017@kadam
Fixes: b6e8d4aa1110 ("rapidio: add RapidIO channelized messaging driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfp: fix simple vNIC mailbox length

[ Upstream commit eaab2d2d0fe4393b040dbf3922e18cd2ab7d6b85 ]

The simple vNIC mailbox length should be 12 decimal and not 0x12.
Using a decimal also makes it clear this is a length value and not
another field within the simple mailbox defines.

Found by code inspection, there are no known firmware configurations
where this would cause issues.

Fixes: 527d7d1b9949 ("nfp: read mailbox address from TLV caps")
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: megaraid_sas: reduce module load time

[ Upstream commit 31b6a05f86e690e1818116fd23c3be915cc9d9ed ]

megaraid_sas takes 1+ seconds to load while waiting for firmware:

[2.822603] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state
[3.871003] megaraid_sas 0000:03:00.0: FW now in Ready state

This is due to the following loop in megasas_transition_to_ready(), which
waits a minimum of 1 second, even though the FW becomes ready in tens of
millisecs:

        /*
         * The cur_state should not last for more than max_wait secs
         */
        for (i = 0; i < max_wait; i++) {
                ...
                msleep(1000);
        ...
        dev_info(&instance->pdev->dev, "FW now in Ready state\n");

This is a regression, caused by a change of the msleep granularity from 1
to 1000 due to concern about waiting too long on systems with coarse
jiffies.

To fix, increase iterations and use msleep(20), which results in:

[2.670627] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state
[2.739386] megaraid_sas 0000:03:00.0: FW now in Ready state

Fixes: fb2f3e96d80f ("scsi: megaraid_sas: Fix msleep granularity")
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mm: Remove unused variable 'cpu'

[ Upstream commit 3609e31bc8dc03b701390f79c74fc7fe92b95039 ]

The commit a2055abe9c67 ("x86/mm: Pass flush_tlb_info to
flush_tlb_others() etc") removed the unnecessary cpu parameter from
uv_flush_tlb_others() but left an unused variable.

arch/x86/mm/tlb.c: In function 'native_flush_tlb_others':
arch/x86/mm/tlb.c:688:16: warning: variable 'cpu' set but not used
[-Wunused-but-set-variable]
   unsigned int cpu;
                ^~~

Fixes: a2055abe9c67 ("x86/mm: Pass flush_tlb_info to flush_tlb_others() etc")
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andyt Lutomirski <luto@kernel.org>
Cc: dave.hansen@linux.intel.com
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20190228220155.88124-1-cai@lca.pw
Signed-off-by: Sasha Levin <sashal@kernel.org>

nios2: ksyms: Add missing symbol exports

[ Upstream commit 0f8ed994575429d6042cf5d7ef70081c94091587 ]

Building nios2:allmodconfig fails as follows (each symbol is only listed
once).

ERROR: "__ashldi3" [drivers/md/dm-writecache.ko] undefined!
ERROR: "__ashrdi3" [fs/xfs/xfs.ko] undefined!
ERROR: "__ucmpdi2" [drivers/media/i2c/adv7842.ko] undefined!
ERROR: "__lshrdi3" [drivers/md/dm-zoned.ko] undefined!
ERROR: "flush_icache_range" [drivers/misc/lkdtm/lkdtm.ko] undefined!
ERROR: "empty_zero_page" [drivers/md/dm-mod.ko] undefined!

The problem is seen with gcc 7.3.0.

Export the missing symbols.

Fixes: 2fc8483fdcde ("nios2: Build infrastructure")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Fix "try" semantics of bus and slot reset

[ Upstream commit ddefc033eecf23f1e8b81d0663c5db965adf5516 ]

The commit referenced below introduced device locking around save and
restore of state for each device during a PCI bus "try" reset, making it
decidely non-"try" and prone to deadlock in the event that a device is
already locked.  Restore __pci_reset_bus() and __pci_reset_slot() to their
advertised locking semantics by pushing the save and restore functions into
the branch where the entire tree is already locked.  Extend the helper
function names with "_locked" and update the comment to reflect this
calling requirement.

Fixes: b014e96d1abb ("PCI: Protect pci_error_handlers->reset_notify() usage with device_lock()")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rbd: clear ->xferred on error from rbd_obj_issue_copyup()

[ Upstream commit 356889c49d84f11f446ec235bd52ca1a7d581aa0 ]

Otherwise the assert in rbd_obj_end_request() is triggered.

Fixes: 3da691bf4366 ("rbd: new request handling code")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb/earth-pt1: fix wrong initialization for demod blocks

[ Upstream commit 15d90a6ae98e6d2c68497b44a491cb9efbb98ab1 ]

earth-pt1 driver was decomposed/restructured by the commit b732539efdba
("media: dvb: earth-pt1: decompose pt1 driver into sub drivers"),
but it introduced a problem regarding concurrent streaming:
Opening a new terrestial stream stops the reception of an existing,
already-opened satellite stream.

The demod IC in earth-pt1 boards contains 2 pairs of terr. and sat. blocks,
supporting 4 concurrent demodulations, and the above problem was because
the config of a terr. block contained whole reset/init of the pair blocks,
thus each open() of a terrestrial frontend wrongly cleared the config of
its peer satellite block of the demod.
This whole/pair reset should be executed earlier and not on each open().

Fixes: b732539efdba ("media: dvb: earth-pt1: decompose pt1 driver into sub drivers")

Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/mm: Check secondary hash page table

[ Upstream commit 790845e2f12709d273d08ea7a2af7c2593689519 ]

We were always calling base_hpte_find() with primary = true,
even when we wanted to check the secondary table.

mpe: I broke this when refactoring Rashmica's original patch.

Fixes: 1515ab932156 ("powerpc/mm: Dump hash table")
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: aquantia: fixed instack structure overflow

[ Upstream commit 8006e3730b6e900319411e35cee85b4513d298df ]

This is a real stack undercorruption found by kasan build.

The issue did no harm normally because it only overflowed
2 bytes after `bitary` array which on most architectures
were mapped into `err` local.

Fixes: bab6de8fd180 ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.")
Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4/flexfiles: Fix invalid deref in FF_LAYOUT_DEVID_NODE()

[ Upstream commit 108bb4afd351d65826648a47f11fa3104e250d9b ]

If the attempt to instantiate the mirror's layout DS pointer failed,
then that pointer may hold a value of type ERR_PTR(), so we need
to check that before we dereference it.

Fixes: 65990d1afbd2d ("pNFS/flexfiles: Fix a deadlock on LAYOUTGET")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Add missing encode / decode sequence_maxsz to v4.2 operations

[ Upstream commit 1a3466aed3a17eed41cd9411f89eb637f58349b0 ]

These really should have been there from the beginning, but we never
noticed because there was enough slack in the RPC request for the extra
bytes. Chuck's recent patch to use au_cslack and au_rslack to compute
buffer size shrunk the buffer enough that this was now a problem for
SEEK operations on my test client.

Fixes: f4ac1674f5da4 ("nfs: Add ALLOCATE support")
Fixes: 2e72448b07dc3 ("NFS: Add COPY nfs operation")
Fixes: cb95deea0b4aa ("NFS OFFLOAD_CANCEL xdr")
Fixes: 624bd5b7b683c ("nfs: Add DEALLOCATE support")
Fixes: 1c6dcbe5ceff8 ("NFS: Implement SEEK")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Fix NULL pointer reference in intel_svm_bind_mm()

[ Upstream commit c56cba5daf45d2d091ef1cfe2f1d6a930446687b ]

Intel IOMMU could be turned off with intel_iommu=off. If Intel
IOMMU is off,  the intel_iommu struct will not be initialized.
When device drivers call intel_svm_bind_mm(), the NULL pointer
reference will happen there.

Add dmar_disabled check to avoid NULL pointer reference.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reported-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 2f26e0a9c9860 ("iommu/vt-d: Add basic SVM PASID support")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: bcm2835 - fix probe as platform device

[ Upstream commit 984798de671a927ac73da31096a150df42e6aaf3 ]

BCM63XX (MIPS) does not use device tree, so there cannot be any
of_device_id, causing the driver to fail on probe:

[    0.904564] bcm2835-rng: probe of bcm63xx-rng failed with error -22

Fix this by checking for match data only if we are probing from device
tree.

Fixes: 8705f24f7b57 ("hwrng: bcm2835 - Enable BCM2835 RNG to work on BCM63xx platforms")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: act_csum: Fix csum calc for tagged packets

[ Upstream commit 2ecba2d1e45b24620a7c3df9531895cf68d5dec6 ]

The csum calculation is different for IPv4/6. For VLAN packets,
tc_skb_protocol returns the VLAN protocol rather than the packet's one
(e.g. IPv4/6), so csum is not calculated. Furthermore, VLAN may not be
stripped so csum is not calculated in this case too. Calculate the
csum for those cases.

Fixes: d8b9605d2697 ("net: sched: fix skb->protocol use in case of accelerated vlan path")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_set_hash: bogus element self comparison from deactivation path

[ Upstream commit a01cbae57ec29b161d42ee1caa4ffffda5d519c2 ]

Use the element from the loop iteration, not the same element we want to
deactivate otherwise this branch always evaluates true.

Fixes: 6c03ae210ce3 ("netfilter: nft_set_hash: add non-resizable hashtable implementation")
Reported-by: Florian Westphal <fw@strlen.de>
Tested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_set_hash: fix lookups with fixed size hash on big endian

[ Upstream commit 3b02b0adc242a72b5e46019b6a9e4f84823592f6 ]

Call jhash_1word() for the 4-bytes key case from the insertion and
deactivation path, otherwise big endian arch set lookups fail.

Fixes: 446a8268b7f5 ("netfilter: nft_set_hash: add lookup variant for fixed size hashtable")
Reported-by: Florian Westphal <fw@strlen.de>
Tested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: Fix length of wmi tlv command for protected mgmt frames

[ Upstream commit 761156ff573d1002983416e4fd1fe8d3489c4bd8 ]

The length of wmi tlv command for management tx send is calculated
incorrectly in case of protected management frames as there is addition
of IEEE80211_CCMP_MIC_LEN twice. This leads to improper behaviour of
firmware as the wmi tlv mgmt tx send command for protected mgmt frames
is formed wrongly.

Fix the length calculation of wmi tlv command for mgmt tx send in case
of protected management frames by adding the IEEE80211_CCMP_MIC_LEN only
once.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes: 1807da49733e "ath10k: wmi: add management tx by reference support over wmi"
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: wm831x-dcdc: Fix list of wm831x_dcdc_ilim from mA to uA

[ Upstream commit c25d47888f0fb3d836d68322d4aea2caf31a75a6 ]

The wm831x_dcdc_ilim entries needs to be uA because it is used to compare
with min_uA and max_uA.
While at it also make the array const and change to use unsigned int.

Fixes: e4ee831f949a ("regulator: Add WM831x DC-DC buck convertor support")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8849/1: NOMMU: Fix encodings for PMSAv8's PRBAR4/PRLAR4

[ Upstream commit d410a8a49e3e00e07d43037e90f776d522b25a6a ]

To access PRBARn, where n is referenced as a binary number:

MRC p15, 0, <Rt>, c6, c8+n[3:1], 4*n[0] ; Read PRBARn into Rt
MCR p15, 0, <Rt>, c6, c8+n[3:1], 4*n[0] ; Write Rt into PRBARn

To access PRLARn, where n is referenced as a binary number:

MRC p15, 0, <Rt>, c6, c8+n[3:1], 4*n[0]+1 ; Read PRLARn into Rt
MCR p15, 0, <Rt>, c6, c8+n[3:1], 4*n[0]+1 ; Write Rt into PRLARn

For PR{B,L}AR4, n is 4, n[0] is 0, n[3:1] is 2, while current encoding
done with n[0] set to 1 which is wrong. Use proper encoding instead.

Fixes: 046835b4aa22b9ab6aa0bb274e3b71047c4b887d ("ARM: 8757/1: NOMMU: Support PMSAv8 MPU")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8848/1: virt: Align GIC version check with arm64 counterpart

[ Upstream commit 9db043d36bd379f4cc99054c079de0dabfc38d03 ]

arm64 has got relaxation on GIC version check at early boot stage due
to update of the GIC architecture let's align ARM with that.

To help backports (even though the code was correct at the time of writing)
Fixes: e59941b9b381 ("ARM: 8527/1: virt: enable GICv3 system registers")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used

[ Upstream commit ca70ea43f80c98582f5ffbbd1e6f4da2742da0c4 ]

MCPM does a soft reset of the CPUs and uses common cpu_resume() routine to
perform low-level platform initialization. This results in a try to install
HYP stubs for the second time for each CPU and results in false HYP/SVC
mode mismatch detection. The HYP stubs are already installed at the
beginning of the kernel initialization on the boot CPU (head.S) or in the
secondary_startup() for other CPUs. To fix this issue MCPM code should use
a cpu_resume() routine without HYP stubs installation.

This change fixes HYP/SVC mode mismatch on Samsung Exynos5422-based Odroid
XU3/XU4/HC1 boards.

Fixes: 3721924c8154 ("ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu: Fix IOMMU debugfs fallout

[ Upstream commit 18b3af4492a0aa6046b86d712f6ba4cbb66100fb ]

A change made in the final version of IOMMU debugfs support replaced the
public function iommu_debugfs_new_driver_dir() by the public dentry
iommu_debugfs_dir in <linux/iommu.h>, but forgot to update both the
implementation in iommu-debugfs.c, and the patch description.

Fix this by exporting iommu_debugfs_dir, and removing the reference to
and implementation of iommu_debugfs_new_driver_dir().

Fixes: bad614b24293ae46 ("iommu: Enable debugfs exposure of IOMMU driver internals")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci-brcmstb: handle mmc_of_parse() errors during probe

[ Upstream commit 1e20186e706da8446f9435f2924cd65ab1397e73 ]

We need to handle mmc_of_parse() errors during probe otherwise the
MMC driver could start without proper initialization (e.g. power sequence).

Fixes: 476bf3d62d5c ("mmc: sdhci-brcmstb: Add driver for Broadcom BRCMSTB SoCs")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS/pnfs: Bulk destroy of layouts needs to be safe w.r.t. umount

[ Upstream commit 5085607d209102b37b169bc94d0aa39566a9842a ]

If a bulk layout recall or a metadata server reboot coincides with a
umount, then holding a reference to an inode is unsafe unless we
also hold a reference to the super block.

Fixes: fd9a8d7160937 ("NFSv4.1: Fix bulk recall and destroy of layouts")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: wmi: fix potential null pointer dereference

[ Upstream commit c355ec651a8941864549f2586f969d0eb7bf499a ]

In the function wmi_dev_match() the variable id is dereferenced without
first performing a NULL check. The variable can for example be NULL if
a WMI driver is registered without specifying the id_table field in
struct wmi_driver.

Add a NULL check and return that the driver can't handle the device if
the variable is NULL.

Fixes: 844af950da94 ("platform/x86: wmi: Turn WMI into a bus driver")
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/exynos_mct: Fix error path in timer resources initialization

[ Upstream commit b9307420196009cdf18bad55e762ac49fb9a80f4 ]

While freeing interrupt handlers in error path, don't assume that all
requested interrupts are per-processor interrupts and properly release
standard interrupts too.

Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Fixes: 56a94f13919c ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/sun5i: Fail gracefully when clock rate is unavailable

[ Upstream commit e7e7e0d7beafebd11b0c065cd5fbc1e5759c5aab ]

If the clock tree is not fully populated when the timer-sun5i init code
is called, attempts to get the clock rate for the timer would fail and
return 0.

Make the init code for both clock events and clocksource check the
returned clock rate and fail gracefully if the result is 0, instead of
causing a divide by 0 exception later on.

Fixes: 4a59058f0b09 ("clocksource/drivers/sun5i: Refactor the current code")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf, pt, coresight: Fix address filters for vmas with non-zero offset

[ Upstream commit c60f83b813e5b25ccd5de7e8c8925c31b3aebcc1 ]

Currently, the address range calculation for file-based filters works as
long as the vma that maps the matching part of the object file starts
from offset zero into the file (vm_pgoff==0). Otherwise, the resulting
filter range would be off by vm_pgoff pages. Another related problem is
that in case of a partially matching vma, that is, a vma that matches
part of a filter region, the filter range size wouldn't be adjusted.

Fix the arithmetics around address filter range calculations, taking
into account vma offset, so that the entire calculation is done before
the filter configuration is passed to the PMU drivers instead of having
those drivers do the final bit of arithmetics.

Based on the patch by Adrian Hunter <adrian.hunter.intel.com>.

Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: 375637bc5249 ("perf/core: Introduce address range filtering")
Link: http://lkml.kernel.org/r/20190215115655.63469-3-alexander.shishkin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf: Copy parent's address filter offsets on clone

[ Upstream commit 18736eef12137c59f60cc9f56dc5bea05c92e0eb ]

When a child event is allocated in the inherit_event() path, the VMA
based filter offsets are not copied from the parent, even though the
address space mapping of the new task remains the same, which leads to
no trace for the new task until exec.

Reported-by: Mansour Alharthi <malharthi9@gatech.edu>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: 375637bc5249 ("perf/core: Introduce address range filtering")
Link: http://lkml.kernel.org/r/20190215115655.63469-2-alexander.shishkin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Fix a soft lockup in the delegation recovery code

[ Upstream commit 6f9449be53f3ce383caed797708b332ede8d952c ]

Fix a soft lockup when NFS client delegation recovery is attempted
but the inode is in the process of being freed. When the
igrab(inode) call fails, and we have to restart the recovery process,
we need to ensure that we won't attempt to recover the same delegation
again.

Fixes: 45870d6909d5a ("NFSv4.1: Test delegation stateids when server...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64s: Fix logic when handling unknown CPU features

[ Upstream commit 8cfaf106918a8c13abb24c641556172afbb9545c ]

In cpufeatures_process_feature(), if a provided CPU feature is unknown and
enable_unknown is false, we erroneously print that the feature is being
enabled and return true, even though no feature has been enabled, and
may also set feature bits based on the last entry in the match table.

Fix this so that we only set feature bits from the match table if we have
actually enabled a feature from that table, and when failing to enable an
unknown feature, always print the "not enabling" message and return false.

Coincidentally, some older gccs (<GCC 7), when invoked with
-fsanitize-coverage=trace-pc, cause a spurious uninitialised variable
warning in this function:

  arch/powerpc/kernel/dt_cpu_ftrs.c: In function ‘cpufeatures_process_feature’:
  arch/powerpc/kernel/dt_cpu_ftrs.c:686:7: warning: ‘m’ may be used uninitialized in this function [-Wmaybe-uninitialized]
    if (m->cpu_ftr_bit_mask)

An upcoming patch will enable support for kcov, which requires this option.
This patch avoids the warning.

Fixes: 5a61ef74f269 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Reported-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[ajd: add commit message]
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtlwifi: Use proper enum for return in halmac_parse_psd_data_88xx

[ Upstream commit e8edc32d70a4e09160835792eb5d1af71a0eec14 ]

Clang warns:

drivers/staging/rtlwifi/halmac/halmac_88xx/halmac_func_88xx.c:2472:11:
warning: implicit conversion from enumeration type 'enum
halmac_cmd_process_status' to different enumeration type 'enum
halmac_ret_status' [-Wenum-conversion]
                        return HALMAC_CMD_PROCESS_ERROR;
                        ~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.

Fix this by using the proper enum for allocation failures,
HALMAC_RET_MALLOC_FAIL, which is used in the rest of this file.

Fixes: e4b08e16b7d9 ("staging: r8822be: check kzalloc return or bail")
Link: https://github.com/ClangBuiltLinux/linux/issues/375
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/nfs: Fix nfs_parse_devname to not modify it's argument

[ Upstream commit 40cc394be1aa18848b8757e03bd8ed23281f572e ]

In the rare and unsupported case of a hostname list nfs_parse_devname
will modify dev_name.  There is no need to modify dev_name as the all
that is being computed is the length of the hostname, so the computed
length can just be shorted.

Fixes: dc04589827f7 ("NFS: Use common device name parsing logic for NFSv4 and NFSv2/v3")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: fix unintended change of bridge interface STP state

[ Upstream commit 9c2054a5cf415a9dc32c91ffde78399955deb571 ]

When a DSA port is added to a bridge and brought up, the resulting STP
state programmed into the hardware depends on the order that these
operations are performed.  However, the Linux bridge code believes that
the port is in disabled mode.

If the DSA port is first added to a bridge and then brought up, it will
be in blocking mode.  If it is brought up and then added to the bridge,
it will be in disabled mode.

This difference is caused by DSA always setting the STP mode in
dsa_port_enable() whether or not this port is part of a bridge.  Since
bridge always sets the STP state when the port is added, brought up or
taken down, it is unnecessary for us to manipulate the STP state.

Apparently, this code was copied from Rocker, and the very next day a
similar fix for Rocker was merged but was not propagated to DSA.  See
e47172ab7e41 ("rocker: put port in FORWADING state after leaving bridge")

Fixes: b73adef67765 ("net: dsa: integrate with SWITCHDEV for HW bridging")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: Fix of-node refcount unbalance in apq8016_sbc_parse_of()

[ Upstream commit 8d1667200850f8753c0265fa4bd25c9a6e5f94ce ]

The apq8016 driver leaves the of-node refcount at aborting from the
loop of for_each_child_of_node() in the error path.  Not only the
iterator node of for_each_child_of_node(), the children nodes referred
from it for codec and cpu have to be properly unreferenced.

Fixes: bdb052e81f62 ("ASoC: qcom: add apq8016 sound card support")
Cc: Patrick Lai <plai@codeaurora.org>
Cc: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: Fix PM-runtime for links added during consumer probe

[ Upstream commit 36003d4cf57ca431fb3f94d317bcca426a2394d6 ]

Commit 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage
counter imbalance") introduced a regression that causes suppliers
to be suspended prematurely for device links added during consumer
driver probe if the initial PM-runtime status of the consumer is
"suspended" and the consumer is resumed after adding the link and
before pm_runtime_put_suppliers() is called.  In that case,
pm_runtime_put_suppliers() will drop the rpm_active refcount for
the link by one and (since rpm_active is equal to two after the
preceding consumer resume) the supplier's PM-runtime usage counter
will be decremented, which may cause the supplier to suspend even
though the consumer's PM-runtime status is "active".

For this reason, partially revert commit 4c06c4e6cf63 as the problem
it tried to fix needs to be addressed somewhat differently, and
change pm_runtime_get_suppliers() and pm_runtime_put_suppliers() so
that the latter only drops rpm_active references acquired by the
former.  [This requires adding a new field to struct device_link,
but I coulnd't find a cleaner way to address the issue that would
work in all cases.]

This causes pm_runtime_put_suppliers() to effectively ignore device
links added during consumer probe, so device_link_add() doesn't need
to worry about ensuring that suppliers will remain active after
pm_runtime_put_suppliers() for links created with DL_FLAG_RPM_ACTIVE
set and it only needs to bump up rpm_active by one for those links,
so pm_runtime_active_link() is not necessary any more.

Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau: fix missing break in switch statement

[ Upstream commit 785cf1eeafa23ec63f426d322401054d13abe2a3 ]

The NOUVEAU_GETPARAM_PCI_DEVICE case is missing a break statement and falls
through to the following NOUVEAU_GETPARAM_BUS_TYPE case and may end up
re-assigning the getparam->value to an undesired value. Fix this by adding
in the missing break.

Detected by CoverityScan, CID#1460507 ("Missing break in switch")

Fixes: 359088d5b8ec ("drm/nouveau: remove trivial cases of nvxx_device() usage")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/pmu: don't print reply values if exec is false

[ Upstream commit b1d03fc36ec9834465a08c275c8d563e07f6f6bf ]

Currently the uninitialized values in the array reply are printed out
when exec is false and nvkm_pmu_send has not updated the array. Avoid
confusion by only dumping out these values if they have been actually
updated.

Detected by CoverityScan, CID#1271291 ("Uninitialized scaler variable")
Fixes: ebb58dc2ef8c ("drm/nouveau/pmu: rename from pwr (no binary change)")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/bios/ramcfg: fix missing parentheses when calculating RON

[ Upstream commit 13649101a25c53c87f4ab98a076dfe61f3636ab1 ]

Currently, the expression for calculating RON is always going to result
in zero no matter the value of ram->mr[1] because the ! operator has
higher precedence than the shift >> operator.  I believe the missing
parentheses around the expression before appying the ! operator will
result in the desired result.

[ Note, not tested ]

Detected by CoveritScan, CID#1324005 ("Operands don't affect result")

Fixes: c25bf7b6155c ("drm/nouveau/bios/ramcfg: Separate out RON pull value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Delete unused FPGA QPN variable

[ Upstream commit 566428375a53619196e31803130dd1a7010c4d7f ]

fpga_qpn was assigned but never used and compilation with W=1
produced the following warning:

drivers/net/ethernet/mellanox/mlx5/core/fpga/core.c: In function _mlx5_fpga_event_:
drivers/net/ethernet/mellanox/mlx5/core/fpga/core.c:320:6: warning:
variable _fpga_qpn_ set but not used [-Wunused-but-set-variable]
  u32 fpga_qpn;
      ^~~~~~~~

Fixes: 98db16bab59f ("net/mlx5: FPGA, Handle QP error event")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: qca8k: Enable delay for RGMII_ID mode

[ Upstream commit a968b5e9d5879f9535d6099505f9e14abcafb623 ]

RGMII_ID specifies that we should have internal delay, so resurrect the
delay addition routine but under the RGMII_ID mode.

Fixes: 40269aa9f40a ("net: dsa: qca8k: disable delay for RGMII mode")
Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: pv88090: Fix array out-of-bounds access

[ Upstream commit a5455c9159414748bed4678184bf69989a4f7ba3 ]

Fix off-by-one while iterating current_limits array.
The valid index should be 0 ~ n_current_limits -1.

Fixes: c90456e36d9c ("regulator: pv88090: new regulator driver")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: pv88080: Fix array out-of-bounds access

[ Upstream commit 3c413f594c4f9df40061445667ca11a12bc8ee34 ]

Fix off-by-one while iterating current_limits array.
The valid index should be 0 ~ n_current_limits -1.

Fixes: 99cf3af5e2d5 ("regulator: pv88080: new regulator driver")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: pv88060: Fix array out-of-bounds access

[ Upstream commit 7cd415f875591bc66c5ecb49bf84ef97e80d7b0e ]

Fix off-by-one while iterating current_limits array.
The valid index should be 0 ~ n_current_limits -1.

Fixes: f307a7e9b7af ("regulator: pv88060: new regulator driver")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: create debugfs files for bus-specific layer

[ Upstream commit aaf6a5e86e36766abbeedf220462bde8031f9a72 ]

Since we moved the drivers debugfs directory under ieee80211 debugfs the
debugfs entries need to be added after wiphy_register() has been called.
For most part that has been done accordingly, but for the debugfs entries
added by SDIO it was not and failed silently. This patch fixes that by
adding a bus-layer callback for it.

Fixes: 856d5a011c86 ("brcmfmac: allocate struct brcmf_pub instance using wiphy_new()")
Reported-by: Russel King <linux@armlinux.org.uk>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cdc-wdm: pass return value of recover_from_urb_loss

[ Upstream commit 0742a338f5b3446a26de551ad8273fb41b2787f2 ]

'rv' is the correct return value, pass it upstream instead of 0

Fixes: 17d80d562fd7 ("USB: autosuspend for cdc-wdm")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: mv_xor: Use correct device for DMA API

[ Upstream commit 3e5daee5ecf314da33a890fabaa2404244cd2a36 ]

Using dma_dev->dev for mappings before it's assigned with the correct
device is unlikely to work as expected, and with future dma-direct
changes, passing a NULL device may end up crashing entirely. I don't
know enough about this hardware or the mv_xor_prep_dma_interrupt()
operation to implement the appropriate error-handling logic that would
have revealed those dma_map_single() calls failing on arm64 for as long
as the driver has been enabled there, but moving the assignment earlier
will at least make the current code operate as intended.

Fixes: 22843545b200 ("dma: mv_xor: Add support for DMA_INTERRUPT")
Reported-by: John David Anglin <dave.anglin@bell.net>
Tested-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: r8822be: check kzalloc return or bail

[ Upstream commit e4b08e16b7d9d030b6475ef48f94d734a39f3c81 ]

The kzalloc() in halmac_parse_psd_data_88xx() can fail and return NULL
so check the psd_set->data after allocation and if allocation failed
return HALMAC_CMD_PROCESS_ERROR.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 938a0447f094 ("staging: r8822be: Add code for halmac sub-drive")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Release all hardware TCE tables attached to a group

[ Upstream commit a67614cc05a5052b265ea48196dab2fce11f5f2e ]

The SPAPR TCE KVM device references all hardware IOMMU tables assigned to
some IOMMU group to ensure that in-kernel KVM acceleration of H_PUT_TCE
can work. The tables are references when an IOMMU group gets registered
with the VFIO KVM device by the KVM_DEV_VFIO_GROUP_ADD ioctl;
KVM_DEV_VFIO_GROUP_DEL calls into the dereferencing code
in kvm_spapr_tce_release_iommu_group() which walks through the list of
LIOBNs, finds a matching IOMMU table and calls kref_put() when found.

However that code stops after the very first successful derefencing
leaving other tables referenced till the SPAPR TCE KVM device is destroyed
which normally happens on guest reboot or termination so if we do hotplug
and unplug in a loop, we are leaking IOMMU tables here.

This removes a premature return to let kvm_spapr_tce_release_iommu_group()
find and dereference all attached tables.

Fixes: 121f80ba68f ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mdio_bus: Fix PTR_ERR() usage after initialization to constant

[ Upstream commit 780feae7eb69388c8d8b661cda6706b0dc0f642b ]

Fix coccinelle warning:

./drivers/net/phy/mdio_bus.c:51:5-12: ERROR: PTR_ERR applied after initialization to constant on line 44
./drivers/net/phy/mdio_bus.c:52:5-12: ERROR: PTR_ERR applied after initialization to constant on line 44

fix this by using IS_ERR before PTR_ERR

Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (pmbus/tps53679) Fix driver info initialization in probe routine

[ Upstream commit ff066653aeed8ee2d4dadb1e35774dd91ecbb19f ]

Fix tps53679_probe() by using dynamically allocated "pmbus_driver_info"
structure instead of static. Usage of static structures causes
overwritten of the field "vrm_version", in case the system is equipped
with several tps53679 devices with the different "vrm_version".
In such case the last probed device overwrites this field for all
others.

Fixes: 610526527a13 ("hwmon: (pmbus) Add support for Texas Instruments tps53679 device")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio_pci: Enable memory accesses before calling pci_map_rom

[ Upstream commit 0cfd027be1d6def4a462cdc180c055143af24069 ]

pci_map_rom/pci_get_rom_size() performs memory access in the ROM.
In case the Memory Space accesses were disabled, readw() is likely
to trigger a synchronous external abort on some platforms.

In case memory accesses were disabled, re-enable them before the
call and disable them back again just after.

Fixes: 89e1f7d4c66d ("vfio: Add PCI device driver")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: sh: migor: Include missing dma-mapping header

[ Upstream commit 5c88ee02932a964096cbbcc7c9f38b78d230bacb ]

Since the removal of the stale soc_camera headers, Migo-R board fails to
build due to missing dma-mapping include directive.

Include missing dma-mapping.h header in Migo-R board file to fix the build
error.

Fixes: a50c7738e8ae ("media: sh: migor: Remove stale soc_camera include")

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: usb: fix possible memory leak in mt76u_buf_free

[ Upstream commit cb83585e1121bd6d6c039cf09fa32380bf8b6258 ]

Move q->ndesc initialization before the for loop in mt76u_alloc_rx
since otherwise allocated urbs will not be freed in mt76u_buf_free
Double-check scatterlist pointer in mt76u_buf_free

Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: b53: Do not program CPU port's PVID

[ Upstream commit 10163aaee9671b01b2f4737922e1a4f43581047a ]

The CPU port is special and does not need to obey VLAN restrictions as
far as untagged traffic goes, also, having the CPU port be part of a
particular PVID is against the idea of keeping it tagged in all VLANs.

Fixes: ca8931948344 ("net: dsa: b53: Keep CPU port as tagged in all VLANs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: b53: Properly account for VLAN filtering

[ Upstream commit dad8d7c6452b5b9f9828c9e2c7ca143205fd40c7 ]

VLAN filtering can be built into the kernel, and also dynamically turned
on/off through the bridge master device. Allow re-configuring the switch
appropriately to account for that by deciding whether VLAN table
(v_table) misses should lead to a drop or forward.

Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: b53: Fix default VLAN ID

[ Upstream commit fea83353177a55540c71c140887737c282137aa2 ]

We were not consistent in how the default VID of a given port was
defined, b53_br_leave() would make sure the VLAN ID would be either 0/1
depending on the switch generation, but b53_configure_vlan(), which is
the default configuration would unconditionally set it to 1. The correct
value is 1 for 5325/5365 series and 0 otherwise. To avoid repeating that
mistake ever again, introduce a helper function: b53_default_pvid() to
factor that out.

Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

keys: Timestamp new keys

[ Upstream commit 7c1857bdbdf1e4c541e45eab477ee23ed4333ea4 ]

Set the timestamp on new keys rather than leaving it unset.

Fixes: 31d5a79d7f3d ("KEYS: Do LRU discard in full keyrings")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: don't use bio->bi_vcnt to figure out segment number

[ Upstream commit 1a67356e9a4829da2935dd338630a550c59c8489 ]

It is wrong to use bio->bi_vcnt to figure out how many segments
there are in the bio even though CLONED flag isn't set on this bio,
because this bio may be splitted or advanced.

So always use bio_segments() in blk_recount_segments(), and it shouldn't
cause any performance loss now because the physical segment number is figured
out in blk_queue_split() and BIO_SEG_VALID is set meantime since
bdced438acd83ad83a6c ("block: setup bi_phys_segments after splitting").

Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 76d8137a3113 ("blk-merge: recaculate segment if it isn't less than max segments")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: phy: twl6030-usb: fix possible use-after-free on remove

[ Upstream commit 5895d311d28f2605e2f71c1a3e043ed38f3ac9d2 ]

In remove(), use cancel_delayed_work_sync() to cancel the
delayed work. Otherwise there's a chance that this work
will continue to run until after the device has been removed.

This issue was detected with the help of Coccinelle.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Bin Liu <b-liu@ti.com>
Fixes: b6a619a883c3 ("usb: phy: Check initial state for twl6030")
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: endpoint: functions: Use memcpy_fromio()/memcpy_toio()

[ Upstream commit 726dabfde6aa35a4f1508e235ae37edbbf9fbc65 ]

Functions copying from/to IO addresses should use the
memcpy_fromio()/memcpy_toio() API rather than plain memcpy().

Fix the issue detected through the sparse tool.

Fixes: 349e7a85b25f ("PCI: endpoint: functions: Add an EP function to test PCI")
Suggested-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
[lorenzo.pieralisi@arm.com: updated log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
CC: Niklas Cassel <niklas.cassel@axis.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
CC: linux-pci@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: Fix possible supplier PM-usage counter imbalance

[ Upstream commit 4c06c4e6cf63d7f3d5dfe62593a073253d750a59 ]

If a stateless device link to a certain supplier with
DL_FLAG_PM_RUNTIME set in the flags is added and then removed by the
consumer driver's probe callback, the supplier's PM-runtime usage
counter will be nonzero after that which effectively causes the
supplier to remain "always on" going forward.

Namely, device_link_add() called to add the link invokes
device_link_rpm_prepare() which notices that the consumer driver is
probing, so it increments the supplier's PM-runtime usage counter
with the assumption that the link will stay around until
pm_runtime_put_suppliers() is called by driver_probe_device(),
but if the link goes away before that point, the supplier's
PM-runtime usage counter will remain nonzero.

To prevent that from happening, first rework pm_runtime_get_suppliers()
and pm_runtime_put_suppliers() to use the rpm_active refounts of device
links and make the latter only drop rpm_active and the supplier's
PM-runtime usage counter for each link by one, unless rpm_active is
one already for it.  Next, modify device_link_add() to bump up the
new link's rpm_active refcount and the suppliers PM-runtime usage
counter by two, to prevent pm_runtime_put_suppliers(), if it is
called subsequently, from suspending the supplier prematurely (in
case its PM-runtime usage counter goes down to 0 in there).

Due to the way rpm_put_suppliers() works, this change does not
affect runtime suspend of the consumer ends of new device links (or,
generally, device links for which DL_FLAG_PM_RUNTIME has just been
set).

Fixes: e2f3cd831a28 ("driver core: Fix handling of runtime PM flags in device_link_add()")
Reported-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Fix memory leak in case we fail to add an IB device

[ Upstream commit fc9e4477f924e84d7798f7a1d41401d699de1219 ]

Make sure the IB device is freed on failure.

Fixes: b5ca15ad7e61 ("IB/mlx5: Add proper representors support")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups

[ Upstream commit 0e6e448bdcf896d001a289a6112a704542d51516 ]

There are two pin groups for the FSIC SPDIF signal, but the FSIC pin
group array lists only one, and it refers to a nonexistent group.

Fixes: 2ecd4154c906b7d6 ("sh-pfc: sh73a0: Add FSI pin groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group

[ Upstream commit b9fd50488b4939ce5b3a026d29e752e17c2d1800 ]

The vin1_data18_b pin group itself is present, but it is not listed in
the VIN1 pin group array, and thus cannot be selected.

Fixes: 7dd74bb1f058786e ("pinctrl: sh-pfc: r8a7792: Add VIN pin groups")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group

[ Upstream commit a4b0350047f1b10207e25e72d7cd3f7826e93769 ]

The entry for "scifb2_data_c" in the SCIFB2 pin group array contains a
typo, thus the group cannot be selected.

Fixes: 5088451962389924 ("pinctrl: sh-pfc: r8a7791 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sh-pfc: emev2: Add missing pinmux functions

[ Upstream commit 1ecd8c9cb899ae277e6986ae134635cb1a50f5de ]

The err_rst_reqb, ext_clki, lowpwr, and ref_clko pin groups are present,
but no pinmux functions refer to them, hence they can not be selected.

Fixes: 1e7d5d849cf4f0c5 ("sh-pfc: Add emev2 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ntb_hw_switchtec: NT req id mapping table register entry number should be 512

[ Upstream commit d123fab71f63aae129aebe052664fda73131921a ]

The number of available NT req id mapping table entries per NTB control
register is 512. The driver mistakenly limits the number to 256.

Fix the array size of NT req id mapping table.

Fixes: c082b04c9d40 ("NTB: switchtec: Add NTB hardware register definitions")
Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ntb_hw_switchtec: debug print 64bit aligned crosslink BAR Numbers

[ Upstream commit cce8e04cf79e47809455215744685e8eb56f94bb ]

Switchtec NTB crosslink BARs are 64bit addressed but they are printed as
32bit addressed BARs. Fix debug log to increment the BAR numbers by 2 to
reflect the 64bit address alignment.

Fixes: 017525018202 ("ntb_hw_switchtec: Add initialization code for crosslink")
Signed-off-by: Paul Selles <paul.selles@microchip.com>
Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/etnaviv: potential NULL dereference

[ Upstream commit 9e05352340d3a3e68c144136db9810b26ebb88c3 ]

The etnaviv_gem_prime_get_sg_table() is supposed to return error
pointers.  Otherwise it can lead to a NULL dereference when it's called
from drm_gem_map_dma_buf().

Fixes: 5f4a4a73f437 ("drm/etnaviv: fix gem_prime_get_sg_table to return new SG table")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xsk: add missing smp_rmb() in xsk_mmap

[ Upstream commit e6762c8bcf982821935a2b1cb33cf8335d0eefae ]

All the setup code in AF_XDP is protected by a mutex with the
exception of the mmap code that cannot use it. To make sure that a
process banging on the mmap call at the same time as another process
is setting up the socket, smp_wmb() calls were added in the umem
registration code and the queue creation code, so that the published
structures that xsk_mmap needs would be consistent. However, the
corresponding smp_rmb() calls were not added to the xsk_mmap
code. This patch adds these calls.

Fixes: 37b076933a8e3 ("xsk: add missing write- and data-dependency barrier")
Fixes: c0c77d8fb787c ("xsk: add user memory registration support sockopt")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi: kcs_bmc: handle devm_kasprintf() failure case

[ Upstream commit 42c7c6ef1e6fa5fc0425120f06f045190b1dda2d ]

devm_kasprintf() may return NULL if internal allocation failed so this
assignment is not safe. Moved the error exit path and added the !NULL
which then allows the devres manager to take care of cleanup.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: cd2315d471f4 ("ipmi: kcs_bmc: don't change device name")
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iw_cxgb4: use tos when finding ipv6 routes

[ Upstream commit c8a7eb554a83214c3d8ee5cb322da8c72810d2dc ]

When IPv6 support was added, the correct tos was not passed to
cxgb_find_route6(). This potentially results in the wrong route entry.

Fixes: 830662f6f032 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iw_cxgb4: use tos when importing the endpoint

[ Upstream commit cb3ba0bde881f0cb7e3945d2a266901e2bd18c92 ]

import_ep() is passed the correct tos, but doesn't use it correctly.

Fixes: ac8e4c69a021 ("cxgb4/iw_cxgb4: TOS support")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: chipsfb: remove set but not used variable 'size'

[ Upstream commit 8e71fa5e4d86bedfd26df85381d65d6b4c860020 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/video/fbdev/chipsfb.c: In function 'chipsfb_pci_init':
drivers/video/fbdev/chipsfb.c:352:22: warning:
 variable 'size' set but not used [-Wunused-but-set-variable]

Fixes: 8c8709334cec ("[PATCH] ppc32: Remove CONFIG_PMAC_PBOOK").
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
[b.zolnierkie: minor commit summary and description fixups]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: pm8xxx: fix unintended sign extension

[ Upstream commit e42280886018c6f77f0a90190f7cba344b0df3e0 ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If
the top bit of the u8 is set then the following conversion to an unsigned
long will sign extend the value causing the upper 32 bits to be set in
the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#1309693 ("Unintended sign extension")

Fixes: 9a9a54ad7aa2 ("drivers/rtc: add support for Qualcomm PMIC8xxx RTC")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: 88pm80x: fix unintended sign extension

[ Upstream commit fb0b322537a831b5b0cb948c56f8f958ce493d3a ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If
the top bit of the u8 is set then the following conversion to an unsigned
long will sign extend the value causing the upper 32 bits to be set in
the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#714646-714649 ("Unintended sign extension")

Fixes: 2985c29c1964 ("rtc: Add rtc support to 88PM80X PMIC")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: 88pm860x: fix unintended sign extension

[ Upstream commit dc9e47160626cdb58d5c39a4f43dcfdb27a5c004 ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If
the top bit of the u8 is set then the following conversion to an unsigned
long will sign extend the value causing the upper 32 bits to be set in
the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#144925-144928 ("Unintended sign extension")

Fixes: 008b30408c40 ("mfd: Add rtc support to 88pm860x")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: original socket family in inet_sock_diag

[ Upstream commit 232dc8ef647658a5352da807d9e994e0e03b43cd ]

Commit ed75986f4aae ("net/smc: ipv6 support for smc_diag.c") changed the
value of the diag_family field. The idea was to indicate the family of
the IP address in the inet_diag_sockid field. But the change makes it
impossible to distinguish an inet_sock_diag response message from SMC
sock_diag response. This patch restores the original behaviour and sends
AF_SMC as value of the diag_family field.

Fixes: ed75986f4aae ("net/smc: ipv6 support for smc_diag.c")
Reported-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: ds1307: rx8130: Fix alarm handling

[ Upstream commit 3f929cad943380370b6db31fcb7a38d898d91089 ]

When the EXTENSION.WADA bit is set, register 0x19 contains a bitmap of
week days, not a day of month. As Linux only handles a single alarm
without repetition using day of month is more flexible, so clear this
bit. (Otherwise a value depending on time.tm_wday would have to be
written to register 0x19.)

Also optimize setting the AIE bit to use a single register write instead
of a bulk write of three registers.

Fixes: ee0981be7704 ("rtc: ds1307: Add support for Epson RX8130CE")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: fixed_phy: Fix fixed_phy not checking GPIO

[ Upstream commit 8f289805616e81f7c1690931aa8a586c76f4fa88 ]

Fix fixed_phy not checking GPIO if no link_update callback
is registered.

In the original version all users registered a link_update
callback so the issue was masked.

Fixes: a5597008dbc2 ("phy: fixed_phy: Add gpio to determine link up/down.")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: fix dma unmap direction for management frames

[ Upstream commit 6e8a8991e2103dcb6a9cff28f460390e8e360848 ]

The management frames transmitted are dma mapped with
direction TO_DEVICE, but incorrectly mapped with
direction FROM_DEVICE during tx complete and error cases.

Fix the direction of dma during dma unmap of the
transmitted management frames.

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1

Fixes: 38a1390e02b7 ("ath10k: dma unmap mgmt tx buffer if wmi cmd send fails")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: msm8916: remove bogus argument to the cpu clock

[ Upstream commit e4f045ef38e61ba37aa4afc916fce4fc1b37aa19 ]

The apcs node has #clock-cells = <0>, which means that those who
references it should specify 0 arguments.

The apcs reference in the cpu node incorrectly specifies an argument,
remove this bogus argument.

Fixes: 65afdf458360 ("arm64: dts: qcom: msm8916: Add CPU frequency scaling support")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal: mediatek: fix register index error

[ Upstream commit eb9aecd90d1a39601e91cd08b90d5fee51d321a6 ]

The index of msr and adcpnp should match the sensor
which belongs to the selected bank in the for loop.

Fixes: b7cf0053738c ("thermal: Add Mediatek thermal driver for mt2701.")
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: ds1672: fix unintended sign extension

[ Upstream commit f0c04c276739ed8acbb41b4868e942a55b128dca ]

Shifting a u8 by 24 will cause the value to be promoted to an integer. If
the top bit of the u8 is set then the following conversion to an unsigned
long will sign extend the value causing the upper 32 bits to be set in
the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#138801 ("Unintended sign extension")

Fixes: edf1aaa31fc5 ("[PATCH] RTC subsystem: DS1672 driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: ingenic: jz4740: Fix gating of UDC clock

[ Upstream commit b7e29924a1a628aec60d18651b493fa1601bf944 ]

The UDC clock is gated when the bit is cleared, not when it is set.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Fixes: 2b555a4b9cae ("clk: ingenic: Add missing flag for UDC clock")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>