OSDN Git Service
Stephen Rothwell [Fri, 1 Aug 2008 05:20:30 +0000 (15:20 +1000)]
powerpc: Move include files to arch/powerpc/include/asm
from include/asm-powerpc. This is the result of a
mkdir arch/powerpc/include/asm
git mv include/asm-powerpc/* arch/powerpc/include/asm
Followed by a few documentation/comment fixups and a couple of places
where <asm-powepc/...> was being used explicitly. Of the latter only
one was outside the arch code and it is a driver only built for powerpc.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Linus Torvalds [Fri, 1 Aug 2008 21:59:11 +0000 (14:59 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] Move include/asm-ia64 to arch/ia64/include/asm
Tim Bird [Fri, 1 Aug 2008 21:05:50 +0000 (14:05 -0700)]
embedded: fix vc_translate operator precedence
This fixes a bug in operator precedence in the newly introduced vc_translate
macro. Without this fix, the translation of some characters on the
kernel console is garbled.
This patch was copied to the e-mail list previously for testing. Now,
all reports confirm that it works, so this is an official post for
application.
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jack Steiner [Fri, 1 Aug 2008 20:08:15 +0000 (15:08 -0500)]
Remove EXPORTS of follow_page & zap_page_range
Delete 2 EXPORTs that were accidentally sent upstream.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steven Rostedt [Thu, 31 Jul 2008 16:40:52 +0000 (12:40 -0400)]
dual license ftrace.txt
I asked legal about the licensing of ftrace.txt, and they told me that,
unless the Documentation directory is specifically set up to handle non
GPL licenses (which it does not appear to be), then it would be best to
put ftrace.txt under the GPL.
This patch adds a dual license to ftrace.txt such that it is under both
the FDL and the GPL.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Thu, 31 Jul 2008 12:46:33 +0000 (13:46 +0100)]
FRV: Wire up new system calls
Wire up for FRV the system calls that were added in the last merge window.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Thu, 31 Jul 2008 12:01:30 +0000 (13:01 +0100)]
MN10300: Wire up new system calls
Wire up system calls added in the last merge window for the MN10300 arch.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eugeniy Meshcheryakov [Thu, 31 Jul 2008 09:03:19 +0000 (10:03 +0100)]
try harder to load tty ldisc driver
Currently function tty_ldisc_get() tries to load an ldisc driver module
only when tty_ldisc_try_get() returns -EAGAIN. This happens only if
module is being unloaded. If ldisc module is not loaded
tty_ldisc_try_get() returns -EINVAL and this case is not handled in
tty_ldisc_get(), so request_module() is not called.
Attached patch fixes this by calling request_module() if
tty_ldisc_try_get() returned any error code.
I discovered this when my UMTS modem stopped working with 2.6.27-rc1
because module ppp_async was not loaded.
Signed-off-by: Eugeniy Meshcheryakov <eugen@debian.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 1 Aug 2008 19:48:16 +0000 (12:48 -0700)]
Merge branch 'kvm-updates-2.6.27' of git://git./linux/kernel/git/avi/kvm
* 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
KVM: s390: Fix kvm on IBM System z10
KVM: Advertise synchronized mmu support to userspace
KVM: Synchronize guest physical memory map to host virtual memory map
KVM: Allow browsing memslots with mmu_lock
KVM: Allow reading aliases with mmu_lock
Linus Torvalds [Fri, 1 Aug 2008 19:47:53 +0000 (12:47 -0700)]
Merge branch 'zero-len' of git://git./linux/kernel/git/jgarzik/misc-2.6
* 'zero-len' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
drivers/media, include/media: delete zero-length files
Benjamin Herrenschmidt [Thu, 31 Jul 2008 07:07:30 +0000 (00:07 -0700)]
mm/hugetlb: don't crash when HPAGE_SHIFT is 0
Some platform decide whether they support huge pages at boot time. On
these, such as powerpc, HPAGE_SHIFT is a variable, not a constant, and is
set to 0 when there is no such support.
The patches to introduce multiple huge pages support broke that causing
the kernel to crash at boot time on machines such as POWER3 which lack
support for multiple page sizes.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yoshinori Sato [Thu, 31 Jul 2008 07:07:29 +0000 (00:07 -0700)]
Missing symbol prefix on vmlinux.lds.h
ARCH=h8300:
init/main.c:781: undefined reference to `___early_initcall_end'
Same problem have
__start___bug_table
__stop___bug_table
__tracedata_start
__tracedata_end
__per_cpu_start
__per_cpu_end
When defining a symbol in vmlinux.lds, use the VMLINUX_SYMBOL macro.
VMLINUX_SYMBOL adds a prefix charactor.
You can't just use straight symbol names in common header files as they
dont take into consideration weird arch-specific ABI conventions. in the
case of Blackfin/h8300, the ABI dictates that any C-visible symbols have
an underscore prefixed to them. Thus all symbols in vmlinux.lds.h need to
be wrapped in VMLINUX_SYMBOL() so that each arch can put hide this magic
in their own files.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: "Mike Frysinger" <vapier.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bjorn Helgaas [Thu, 31 Jul 2008 07:07:27 +0000 (00:07 -0700)]
PNP: fix formatting of dbg_pnp_show_resources() output
Each resource should be printed on its own line, so start snprintf'ing
at the beginning of the buffer every time through the loop.
Also, use scnprintf() rather than snprintf() when building up the
buffer to print. scnprintf() returns the number of characters actually
written into the buffer (not including the trailing NULL).
snprintf() returns the number of characters that *would be* written,
assuming everything would fit in the buffer. That's nice if we want to
resize the buffer to make sure everything fits, but in this case, I
just want to keep from overflowing the buffer, and it's OK if the
output is truncated.
Using snprintf() meant that my "len" could grow to be more than the
the buffer size, which makes "sizeof(buf) - len" negative, which causes
this alarming WARN_ON:
http://marc.info/?l=linux-kernel&m=
121736480005656&w=2
More useful snprintf/scnprintf discussion:
http://lwn.net/Articles/69419/
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reported-by: Pete Clements <clem@clem.clem-digital.net>
Cc: Rene Herman <rene.herman@keyaccess.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Niels de Vos [Thu, 31 Jul 2008 07:07:23 +0000 (00:07 -0700)]
Remove newline from the description of module parameters
Some module parameters with only one line have the '\n' at the end of the
description. This is not needed nor wanted as after the description the
type (i.e. int) is followed by a newline.
Some modules contain a multi-line description, these are not affected
by this patch.
Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Ed L. Cashin <ecashin@coraid.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Roland Dreier <rolandd@cisco.com>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 1 Aug 2008 19:41:29 +0000 (12:41 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
pata_it821x: Driver updates and reworking
libata.h: replace __FUNCTION__ with __func__
ata_piix: subsys 106b:00a3 is apple ich8m too
libata-core: make sure that ata_force_tbl is freed in case of an error
libata: update atapi disable handling
pata_via: add VX800 flag; add function for fixing h/w bugs
pata_ali: misplaced pci_dev_put()
Linus Torvalds [Fri, 1 Aug 2008 19:39:09 +0000 (12:39 -0700)]
Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-pull
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-pull: (64 commits)
[XFS] Remove vn_revalidate calls in xfs.
[XFS] Now that xfs_setattr is only used for attributes set from ->setattr
[XFS] xfs_setattr currently doesn't just handle the attributes set through
[XFS] fix use after free with external logs or real-time devices
[XFS] A bug was found in xfs_bmap_add_extent_unwritten_real(). In a
[XFS] fix compilation without CONFIG_PROC_FS
[XFS] s/XFS_PURGE_INODE/IRELE/g s/VN_HOLD(XFS_ITOV())/IHOLD()/
[XFS] fix mount option parsing in remount
[XFS] Disable queue flag test in barrier check.
[XFS] streamline init/exit path
[XFS] Fix up problem when CONFIG_XFS_POSIX_ACL is not set and yet we still
[XFS] Don't assert if trying to mount with blocksize > pagesize
[XFS] Don't update mtime on rename source
[XFS] Allow xfs_bmbt_split() to fallback to the lowspace allocator
[XFS] Restore the lowspace extent allocator algorithm
[XFS] use minleft when allocating in xfs_bmbt_split()
[XFS] attrmulti cleanup
[XFS] Check for invalid flags in xfs_attrlist_by_handle.
[XFS] Fix CI lookup in leaf-form directories
[XFS] Use the generic xattr methods.
...
Dean Nelson [Fri, 1 Aug 2008 14:55:26 +0000 (09:55 -0500)]
add reverse dependency of CONFIG_SGI_XP upon CONFIG_SGI_GRU
Add a reverse dependency of CONFIG_SGI_XP upon CONFIG_SGI_GRU to Kconfig.
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dean Nelson [Fri, 1 Aug 2008 19:19:08 +0000 (14:19 -0500)]
add dependency of CONFIG_SGI_XP upon CONFIG_NET
Add a dependency of CONFIG_SGI_XP upon CONFIG_NET to Kconfig.
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roland McGrath [Thu, 31 Jul 2008 09:04:09 +0000 (02:04 -0700)]
tracehook: fix exit_signal=0 case
My commit
2b2a1ff64afbadac842bbc58c5166962cf4f7664 introduced a regression
(sorry about that) for the odd case of exit_signal=0 (e.g. clone_flags=0).
This is not a normal use, but it's used by a case in the glibc test suite.
Dying with exit_signal=0 sends no signal, but it's supposed to wake up a
parent's blocked wait*() calls (unlike the delayed_group_leader case).
This fixes tracehook_notify_death() and its caller to distinguish a
"signal 0" wakeup from the delayed_group_leader case (with no wakeup).
Signed-off-by: Roland McGrath <roland@redhat.com>
Tested-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 1 Aug 2008 18:56:07 +0000 (11:56 -0700)]
Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
md: raid10: wake up frozen array
md: do not count blocked devices as spares
md: do not progress the resync process if the stripe was blocked
md: delay notification of 'active_idle' to the recovery thread
md: fix merge error
md: move async_tx_issue_pending_all outside spin_lock_irq
Linus Torvalds [Fri, 1 Aug 2008 18:54:05 +0000 (11:54 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
[PATCH] ocfs2: Release mutex in error handling code
[PATCH] ocfs2: Fix oops when racing files truncates with writes into an mmap region
[PATCH 2/2] ocfs2: Fix race between mount and recovery
[PATCH 1/2] ocfs2: Add counter in struct ocfs2_dinode to track journal replays
[PATCH] configfs: Convenience macros for attribute definition.
[PATCH] configfs: Pin configfs subsystems separately from new config_items.
[PATCH] configfs: Fix open directory making rmdir() fail
[PATCH] configfs: Lock new directory inodes before removing on cleanup after failure
[PATCH] configfs: Prevent userspace from creating new entries under attaching directories
[PATCH] configfs: Fix failing symlink() making rmdir() fail
[PATCH] configfs: Fix symlink() to a removing item
[PATCH] configfs: Include linux/err.h in linux/configfs.h
Linus Torvalds [Fri, 1 Aug 2008 18:52:39 +0000 (11:52 -0700)]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
locking: fix mutex @key parameter kernel-doc notation
Linus Torvalds [Fri, 1 Aug 2008 18:50:21 +0000 (11:50 -0700)]
Merge git://git./linux/kernel/git/sam/kbuild-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kbuild: scripts/ver_linux: don't set PATH
Kconfig/init: change help text to match default value
kbuild: genksyms: Include extern information in dumps
kbuild: genksyms parser: fix the __attribute__ rule
kbuild: scripts/genksyms/lex.l: add %option noinput
kconfig: scripts/kconfig/zconf.l: add %option noinput
kbuild: fix O=... build of um
Linus Torvalds [Fri, 1 Aug 2008 18:46:00 +0000 (11:46 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
md: the bitmap code needs to use blk_plug_device_unlocked()
block: add a blk_plug_device_unlocked() that grabs the queue lock
Linus Torvalds [Fri, 1 Aug 2008 18:45:09 +0000 (11:45 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
kgdb: fix gdb serial thread queries
kgdb: fix kgdb_validate_break_address to perform a mem write
kgdb: remove the requirement for CONFIG_FRAME_POINTER
Linus Torvalds [Fri, 1 Aug 2008 18:44:24 +0000 (11:44 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: ASoC: Export dapm_reg_event() fully
ALSA: ASoC: Update Poodle to current ASoC API
ALSA: asoc: restrict sample rate and size in Freescale MPC8610 sound drivers
ALSA: sound/soc/pxa/tosa.c: removed duplicated include
Linus Torvalds [Fri, 1 Aug 2008 18:35:16 +0000 (11:35 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (46 commits)
tcp: MD5: Fix IPv6 signatures
skbuff: add missing kernel-doc for do_not_encrypt
net/ipv4/route.c: fix build error
tcp: MD5: Fix MD5 signatures on certain ACK packets
ipv6: Fix ip6_xmit to send fragments if ipfragok is true
ipvs: Move userspace definitions to include/linux/ip_vs.h
netdev: Fix lockdep warnings in multiqueue configurations.
netfilter: xt_hashlimit: fix race between htable_destroy and htable_gc
netfilter: ipt_recent: fix race between recent_mt_destroy and proc manipulations
netfilter: nf_conntrack_tcp: decrease timeouts while data in unacknowledged
irda: replace __FUNCTION__ with __func__
nsc-ircc: default to dongle type 9 on IBM hardware
bluetooth: add quirks for a few hci_usb devices
hysdn: remove the packed attribute from PofTimStamp_tag
isdn: use the common ascii hex helpers
tg3: adapt tg3 to use reworked PCI PM code
atm: fix direct casts of pointers to u32 in the InterPhase driver
atm: fix const assignment/discard warnings in the ATM networking driver
net: use the common ascii hex helpers
random32: seeding improvement
...
Linus Torvalds [Fri, 1 Aug 2008 18:33:19 +0000 (11:33 -0700)]
Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
hwmon: needs new maintainer
hwmon: (lm85) Simplify device initialization function
hwmon: (lm85) Misc cleanups
hwmon: (lm85) Don't write back cached values
hwmon: (lm85) Drop dead code
hwmon: (lm85) Coding-style cleanups
hwmon: (lm75) add new-style driver binding
hwmon: (lm75) cleanup/reorg
hwmon: (adt7473) clarify an awkward bit of code
hwmon: (adt7473) Remove unused defines
hwmon: (dme1737) fix voltage scaling
hwmon: (dme1737) probe all addresses
hwmon: (dme1737) demacrofy for readability
Jens Axboe [Fri, 1 Aug 2008 18:32:31 +0000 (20:32 +0200)]
md: the bitmap code needs to use blk_plug_device_unlocked()
It doesn't hold the queue lock, so it's both racey on the queue flags
and thus spews a warning.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jens Axboe [Fri, 1 Aug 2008 18:31:32 +0000 (20:31 +0200)]
block: add a blk_plug_device_unlocked() that grabs the queue lock
blk_plug_device() must be called with the queue lock held, so callers
often just grab and release the lock for that purpose. Add a helper
that does just that.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Linus Torvalds [Fri, 1 Aug 2008 18:29:54 +0000 (11:29 -0700)]
Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
[MTD] [NAND] drivers/mtd/nand/nandsim.c: fix printk warnings
[MTD] [NAND] Blackfin NFC Driver: Cleanup the error exit path of bf5xx_nand_probe function
[MTD] [NAND] Blackfin NFC Driver: use standard dev_err() rather than printk()
[MTD] [NAND] Blackfin NFC Driver: enable Blackfin nand HWECC support by default
[MTD] [NAND] Blackfin NFC Driver: add proper devinit/devexit markings to probe/remove functions
[MTD] [NAND] Blackfin NFC Driver: add support for the ECC layout the Blackfin bootrom uses
[MTD] [NAND] Blackfin NFC Driver: fix bug - hw ecc calc by making sure we extract 11 bits from each register instead of 10
[MTD] [NAND] Blackfin NFC Driver: fix bug - do not clobber the status from the first 256 bytes if operating on 512 pages
[MTD] [NAND] diskonchip.c fix sparse endian warnings
[MTD] [NAND] drivers/mtd/nand/nandsim.c needs div64.h
[JFFS2] Fix allocation of summary buffer
Fix rename of at91_nand -> atmel_nand
[MTD] [NOR] drivers/mtd/chips/jedec_probe.c: fix Am29DL800BB device ID
[MTD] MTD_DEBUG always does compile-time typechecks
[MTD] DataFlash: bugfix, binary page sizes now handled
[MTD] [NAND] fsl_elbc_nand.c: fix printk warning
[MTD] [NAND] nandsim: support random page read command
[MTD] [NAND] fix subpage read for small page NAND
Linus Torvalds [Fri, 1 Aug 2008 18:26:51 +0000 (11:26 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
[PATCH] pass struct path * to do_add_mount()
[PATCH] switch mtd and dm-table to lookup_bdev()
[patch 3/4] vfs: remove unused nameidata argument of may_create()
[PATCH] devpts: switch to IDA
[PATCH 2/2] proc: switch inode number allocation to IDA
[PATCH 1/2] proc: fix inode number bogorithmetic
[PATCH] fix bdev leak in block_dev.c do_open()
[PATCH] fix races and leaks in vfs_quota_on() users
[PATCH] clean dup2() up a bit
[PATCH] merge locate_fd() and get_unused_fd()
[PATCH] ipv4_static_sysctl_init() should be under CONFIG_SYSCTL
Re: BUG at security/selinux/avc.c:883 (was: Re: linux-next: Tree
Linus Torvalds [Fri, 1 Aug 2008 18:23:09 +0000 (11:23 -0700)]
Merge branch 'audit.b54' of git://git./linux/kernel/git/viro/audit-current
* 'audit.b54' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
[PATCH] Fix the bug of using AUDIT_STATUS_RATE_LIMIT when set fail, no error output.
[PATCH] Fix the kernel panic of audit_filter_task when key field is set
Re: [PATCH] the loginuid field should be output in all AUDIT_CONFIG_CHANGE audit messages
kernel/audit.c control character detection is off-by-one
[PATCH] Audit: Collect signal info when SIGUSR2 is sent to auditd
Linus Torvalds [Fri, 1 Aug 2008 18:22:45 +0000 (11:22 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
au1xmmc: raise segment size limit.
mmc_block: use proper sg iterators
mmc: properly iterate over sg list in debug check
mmc_test: Revert "mmc_test: test oversized sg lists"
sdhci: check correct return value
sdhci: disable DMA for req, not completely
sdhci: handle bug in JMB38x for sizes < 4 bytes
Linus Torvalds [Fri, 1 Aug 2008 17:56:40 +0000 (10:56 -0700)]
Merge branch 'reg-for-linus' of git://git./linux/kernel/git/lrg/voltage-2.6
* 'reg-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
regulator: TI bq24022 Li-Ion Charger driver
regulator: maintainers - add maintainers for regulator framework.
regulator: documentation - ABI
regulator: documentation - machine
regulator: documentation - regulator driver
regulator: documentation - consumer interface
regulator: documentation - overview
regulator: core kbuild files
regulator: regulator test harness
regulator: add support for fixed regulators.
regulator: regulator framework core
regulator: fixed regulator interface
regulator: machine driver interface
regulator: regulator driver interface
regulator: consumer device interface
Linus Torvalds [Fri, 1 Aug 2008 17:55:57 +0000 (10:55 -0700)]
Merge branch 'hotfixes' of git://git./linux/kernel/git/jmorris/security-testing-2.6
* 'hotfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
SELinux: /proc/mounts should show what it can
Linus Torvalds [Fri, 1 Aug 2008 17:55:07 +0000 (10:55 -0700)]
Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
power_supply: Sharp SL-6000 (tosa) batteries support
power_supply: fix up CHARGE_COUNTER output to be more precise
power_supply: add CHARGE_COUNTER property and olpc_battery support for it
power_supply: bump EC version check that we refuse to run with in olpc_battery
power_supply: cleanup of the OLPC battery driver
power_supply: add eeprom dump file to olpc_battery's sysfs
power_supply: Support serial number in olpc_battery
Linus Torvalds [Fri, 1 Aug 2008 17:53:43 +0000 (10:53 -0700)]
Merge git://git./linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (28 commits)
mm/hugetlb.c must #include <asm/io.h>
video: Fix up hp6xx driver build regressions.
sh: defconfig updates.
sh: Kill off stray mach-rsk7203 reference.
serial: sh-sci: Fix up SH7760/SH7780/SH7785 early printk regression.
sh: Move out individual boards without mach groups.
sh: Make sure AT_SYSINFO_EHDR is exposed to userspace in asm/auxvec.h.
sh: Allow SH-3 and SH-5 to use common headers.
sh: Provide common CPU headers, prune the SH-2 and SH-2A directories.
sh/maple: clean maple bus code
sh: More header path fixups for mach dir refactoring.
sh: Move out the solution engine headers to arch/sh/include/mach-se/
sh: I2C fix for AP325RXA and Migo-R
sh: Shuffle the board directories in to mach groups.
sh: dma-sh: Fix up dreamcast dma.h mach path.
sh: Switch KBUILD_DEFCONFIG to shx3_defconfig.
sh: Add ARCH_DEFCONFIG entries for sh and sh64.
sh: Fix compile error of Solution Engine
sh: Proper __put_user_asm() size mismatch fix.
sh: Stub in a dummy ENTRY_OFFSET for uImage offset calculation.
...
Linus Torvalds [Fri, 1 Aug 2008 17:28:17 +0000 (10:28 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
generic, x86: fix add iommu_num_pages helper function
x86: remove stray <6> in BogoMIPS printk
x86: move dma32_reserve_bootmem() after reserve_crashkernel()
Linus Torvalds [Fri, 1 Aug 2008 17:27:10 +0000 (10:27 -0700)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[S390] qeth: avoid use of include/asm-s390
[S390] dont use kthread for smp_rescan_cpus().
[S390] virtio console: fix section mismatch warning.
[S390] cio: Include linux/string.h in schid.h.
[S390] qdio: fix section mismatch bug.
[S390] stp: fix section mismatch warning.
[S390] Remove diag 0x260 call from memory detection.
[S390] qdio: make sure qdr is aligned to page size
[S390] Add support for memory hot-remove.
[S390] Wire up new syscalls.
[S390] cio: Memory allocation for idset changed.
[S390] qeth: preallocated qeth header for hiper socket
[S390] Optimize storage key operations for anon pages
[S390] nohz/sclp: disable timer on synchronous waits.
[S390] ipl: Reboot from alternate device does not work when booting from file
[S390] dasd: Add support for enhanced VM UID
[S390] Remove last P390 trace.
Tony Luck [Fri, 1 Aug 2008 17:13:32 +0000 (10:13 -0700)]
[IA64] Move include/asm-ia64 to arch/ia64/include/asm
After moving the the include files there were a few clean-ups:
1) Some files used #include <asm-ia64/xyz.h>, changed to <asm/xyz.h>
2) Some comments alerted maintainers to look at various header files to
make matching updates if certain code were to be changed. Updated these
comments to use the new include paths.
3) Some header files mentioned their own names in initial comments. Just
deleted these self references.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Manuel Lauss [Tue, 29 Jul 2008 08:10:49 +0000 (10:10 +0200)]
au1xmmc: raise segment size limit.
Raise the DMA block size limit from 2048 bytes to the maximum supported
by the DMA controllers on the chip (64KB on Au1100, 4MB on Au1200).
This gives a very small performance boost and apparently fixes an oops
when MMC-DMA and network traffic are active at the same time.
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Pierre Ossman [Mon, 28 Jul 2008 23:23:24 +0000 (01:23 +0200)]
mmc_block: use proper sg iterators
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Pierre Ossman [Mon, 28 Jul 2008 23:09:37 +0000 (01:09 +0200)]
mmc: properly iterate over sg list in debug check
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Pierre Ossman [Mon, 28 Jul 2008 23:05:22 +0000 (01:05 +0200)]
mmc_test: Revert "mmc_test: test oversized sg lists"
This reverts commit
48b5352ea1891455eb8e824cf7d92f66931a090f. Oversized
sg lists are not allowed anymore, and the core even checks for them in
debug mode, so this test is entirely incorrect.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Pierre Ossman [Mon, 28 Jul 2008 22:53:20 +0000 (00:53 +0200)]
sdhci: check correct return value
Fix a copy-and-paste error.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Pierre Ossman [Mon, 28 Jul 2008 22:45:51 +0000 (00:45 +0200)]
sdhci: disable DMA for req, not completely
The wrong flag was manipulated when an invalid sg list was given, turning
off DMA on the next (and all subsequent) request instead of the current
one.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Pierre Ossman [Mon, 28 Jul 2008 22:11:16 +0000 (00:11 +0200)]
sdhci: handle bug in JMB38x for sizes < 4 bytes
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
zhangxiliang [Thu, 31 Jul 2008 02:11:19 +0000 (10:11 +0800)]
[PATCH] Fix the bug of using AUDIT_STATUS_RATE_LIMIT when set fail, no error output.
When the "status_get->mask" is "AUDIT_STATUS_RATE_LIMIT || AUDIT_STATUS_BACKLOG_LIMIT".
If "audit_set_rate_limit" fails and "audit_set_backlog_limit" succeeds, the "err" value
will be greater than or equal to 0. It will miss the failure of rate set.
Signed-off-by: Zhang Xiliang <zhangxiliang@cn.fujitsu.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
zhangxiliang [Fri, 1 Aug 2008 11:15:47 +0000 (19:15 +0800)]
[PATCH] Fix the kernel panic of audit_filter_task when key field is set
When calling audit_filter_task(), it calls audit_filter_rules() with audit_context is NULL.
If the key field is set, the result in audit_filter_rules() will be set to 1 and
ctx->filterkey will be set to key.
But the ctx is NULL in this condition, so kernel will panic.
Signed-off-by: Zhang Xiliang <zhangxiliang@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
zhangxiliang [Fri, 1 Aug 2008 01:47:01 +0000 (09:47 +0800)]
Re: [PATCH] the loginuid field should be output in all AUDIT_CONFIG_CHANGE audit messages
> shouldn't these be using the "audit_get_loginuid(current)" and if we
> are going to output loginuid we also should be outputting sessionid
Thanks for your detailed explanation.
I have made a new patch for outputing "loginuid" and "sessionid" by audit_get_loginuid(current) and audit_get_sessionid(current).
If there are some deficiencies, please give me your indication.
Signed-off-by: Zhang Xiliang <zhangxiliang@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Vesa-Matti J Kari [Tue, 22 Jul 2008 21:06:13 +0000 (00:06 +0300)]
kernel/audit.c control character detection is off-by-one
Hello,
According to my understanding there is an off-by-one bug in the
function:
audit_string_contains_control()
in:
kernel/audit.c
Patch is included.
I do not know from how many places the function is called from, but for
example, SELinux Access Vector Cache tries to log untrusted filenames via
call path:
avc_audit()
audit_log_untrustedstring()
audit_log_n_untrustedstring()
audit_string_contains_control()
If audit_string_contains_control() detects control characters, then the
string is hex-encoded. But the hex=0x7f dec=127, DEL-character, is not
detected.
I guess this could have at least some minor security implications, since a
user can create a filename with 0x7f in it, causing logged filename to
possibly look different when someone reads it on the terminal.
Signed-off-by: Vesa-Matti Kari <vmkari@cc.helsinki.fi>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Eric Paris [Mon, 7 Jul 2008 14:49:45 +0000 (10:49 -0400)]
[PATCH] Audit: Collect signal info when SIGUSR2 is sent to auditd
Makes the kernel audit subsystem collect information about the sending
process when that process sends SIGUSR2 to the userspace audit daemon.
SIGUSR2 is a new interesting signal to auditd telling auditd that it
should try to start logging to disk again and the error condition which
caused it to stop logging to disk (usually out of space) has been
rectified.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Fri, 1 Aug 2008 13:05:54 +0000 (09:05 -0400)]
[PATCH] pass struct path * to do_add_mount()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Fri, 1 Aug 2008 09:00:11 +0000 (05:00 -0400)]
[PATCH] switch mtd and dm-table to lookup_bdev()
No need to open-code it...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Miklos Szeredi [Wed, 30 Jul 2008 13:08:48 +0000 (15:08 +0200)]
[patch 3/4] vfs: remove unused nameidata argument of may_create()
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Alexey Dobriyan [Sat, 26 Jul 2008 07:42:16 +0000 (11:42 +0400)]
[PATCH] devpts: switch to IDA
Devpts code wants just numbers for tty indexes.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Alexey Dobriyan [Sat, 26 Jul 2008 07:21:37 +0000 (11:21 +0400)]
[PATCH 2/2] proc: switch inode number allocation to IDA
proc doesn't use "associate pointer with id" feature of IDR, so switch
to IDA.
NOTE, NOTE, NOTE:
Do not apply if release_inode_number() still mantions MAX_ID_MASK!
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Alexey Dobriyan [Sat, 26 Jul 2008 07:18:28 +0000 (11:18 +0400)]
[PATCH 1/2] proc: fix inode number bogorithmetic
Id which proc gets from IDR for inode number and id which proc removes
from IDR do not match. E.g. 0x11a transforms into 0x8000011a.
Which stayed unnoticed for a long time because, surprise, idr_remove()
masks out that high bit before doing anything.
All of this due to "| ~MAX_ID_MASK" in release_inode_number().
I still don't understand how it's supposed to work, because "| ~MASK"
is not an inversion for "& MAX" operation.
So, use just one nice, working addition. Make start offset unsigned int,
while I'm at it. It's longness is not used anywhere.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Fri, 1 Aug 2008 09:32:04 +0000 (05:32 -0400)]
[PATCH] fix bdev leak in block_dev.c do_open()
Callers expect it to drop reference to bdev on all failure exits.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Fri, 1 Aug 2008 08:29:18 +0000 (04:29 -0400)]
[PATCH] fix races and leaks in vfs_quota_on() users
* new helper: vfs_quota_on_path(); equivalent of vfs_quota_on() sans the
pathname resolution.
* callers of vfs_quota_on() that do their own pathname resolution and
checks based on it are switched to vfs_quota_on_path(); that way we
avoid the races.
* reiserfs leaked dentry/vfsmount references on several failure exits.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 30 Jul 2008 10:18:03 +0000 (06:18 -0400)]
[PATCH] clean dup2() up a bit
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 30 Jul 2008 08:13:04 +0000 (04:13 -0400)]
[PATCH] merge locate_fd() and get_unused_fd()
New primitive: alloc_fd(start, flags). get_unused_fd() and
get_unused_fd_flags() become wrappers on top of it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 30 Jul 2008 10:32:52 +0000 (06:32 -0400)]
[PATCH] ipv4_static_sysctl_init() should be under CONFIG_SYSCTL
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stephen Smalley [Mon, 28 Jul 2008 17:32:38 +0000 (13:32 -0400)]
Re: BUG at security/selinux/avc.c:883 (was: Re: linux-next: Tree
for July 17: early crash on x86-64)
SELinux needs MAY_APPEND to be passed down to the security hook.
Otherwise, we get permission denials when only append permission is
granted by policy even if the opening process specified O_APPEND.
Shows up as a regression in the ltp selinux testsuite, fixed by
this patch.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Andrew Morton [Wed, 30 Jul 2008 19:35:04 +0000 (12:35 -0700)]
[MTD] [NAND] drivers/mtd/nand/nandsim.c: fix printk warnings
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Bryan Wu [Wed, 30 Jul 2008 19:35:04 +0000 (12:35 -0700)]
[MTD] [NAND] Blackfin NFC Driver: Cleanup the error exit path of bf5xx_nand_probe function
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Mike Frysinger [Wed, 30 Jul 2008 19:35:03 +0000 (12:35 -0700)]
[MTD] [NAND] Blackfin NFC Driver: use standard dev_err() rather than printk()
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Mike Frysinger [Wed, 30 Jul 2008 19:35:02 +0000 (12:35 -0700)]
[MTD] [NAND] Blackfin NFC Driver: enable Blackfin nand HWECC support by default
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Mike Frysinger [Wed, 30 Jul 2008 19:35:02 +0000 (12:35 -0700)]
[MTD] [NAND] Blackfin NFC Driver: add proper devinit/devexit markings to probe/remove functions
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Mike Frysinger [Wed, 30 Jul 2008 19:35:01 +0000 (12:35 -0700)]
[MTD] [NAND] Blackfin NFC Driver: add support for the ECC layout the Blackfin bootrom uses
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Mike Frysinger [Wed, 30 Jul 2008 19:35:00 +0000 (12:35 -0700)]
[MTD] [NAND] Blackfin NFC Driver: fix bug - hw ecc calc by making sure we extract 11 bits from each register instead of 10
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Mike Frysinger [Wed, 30 Jul 2008 19:34:59 +0000 (12:34 -0700)]
[MTD] [NAND] Blackfin NFC Driver: fix bug - do not clobber the status from the first 256 bytes if operating on 512 pages
Singed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Martin Schwidefsky [Fri, 1 Aug 2008 14:39:24 +0000 (16:39 +0200)]
[S390] qeth: avoid use of include/asm-s390
The planned move of include/asm-s390 to arch/s390/include/asm
requires that all includes for asm headers use include/asm and
not include/asm-s390.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Fri, 1 Aug 2008 14:39:23 +0000 (16:39 +0200)]
[S390] dont use kthread for smp_rescan_cpus().
Since git commit
3da1c84c00c7e5fa8348336bd8c342f9128b0f14
"workqueues: make get_online_cpus() useable for work->func()"
it is safe to call get_online_cpus() from workqueue context.
So remove the kthread workaround again.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Fri, 1 Aug 2008 14:39:22 +0000 (16:39 +0200)]
[S390] virtio console: fix section mismatch warning.
Fix these two false positive warnings:
WARNING: vmlinux.o(.text+0x2e1cc4): Section mismatch in reference from the function s390_virtio_console_init() to the function .init.text:early_put_chars()
The function s390_virtio_console_init() references
the function __init early_put_chars().
This is often because s390_virtio_console_init lacks a __init
annotation or the annotation of early_put_chars is wrong.
WARNING: vmlinux.o(.text+0x2e1cd0): Section mismatch in reference from the function s390_virtio_console_init() to the function .init.text:virtio_cons_early_init()
The function s390_virtio_console_init() references
the function __init virtio_cons_early_init().
This is often because s390_virtio_console_init lacks a __init
annotation or the annotation of virtio_cons_early_init is wrong.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cornelia Huck [Fri, 1 Aug 2008 14:39:21 +0000 (16:39 +0200)]
[S390] cio: Include linux/string.h in schid.h.
schid.h needs string.h for memset and memcmp.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Fri, 1 Aug 2008 14:39:20 +0000 (16:39 +0200)]
[S390] qdio: fix section mismatch bug.
Fix the two section mismatch warnings below.
This fixes two real bugs since the code which has __exit annotations
may already be gone when it is called.
WARNING: vmlinux.o(.init.text+0x1cc4a): Section mismatch in reference from the function init_QDIO() to the function .exit.text:qdio_setup_exit()
The function __init init_QDIO() references
a function __exit qdio_setup_exit().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
qdio_setup_exit() so it may be used outside an exit section.
WARNING: vmlinux.o(.init.text+0x1cc7a): Section mismatch in reference from the function init_QDIO() to the function .exit.text:qdio_remove_perf_stats()
The function __init init_QDIO() references
a function __exit qdio_remove_perf_stats().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
qdio_remove_perf_stats() so it may be used outside an exit section.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Fri, 1 Aug 2008 14:39:19 +0000 (16:39 +0200)]
[S390] stp: fix section mismatch warning.
Fix these two (false positive) warnings by adding an __init annoation:
WARNING: vmlinux.o(.text+0x7e6a): Section mismatch in reference from the function stp_reset() to the function .init.text:__alloc_bootmem()
The function stp_reset() references
the function __init __alloc_bootmem().
This is often because stp_reset lacks a __init
annotation or the annotation of __alloc_bootmem is wrong.
WARNING: vmlinux.o(.text+0x7ece): Section mismatch in reference from the function stp_reset() to the function .init.text:free_bootmem()
The function stp_reset() references
the function __init free_bootmem().
This is often because stp_reset lacks a __init
annotation or the annotation of free_bootmem is wrong.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Fri, 1 Aug 2008 14:39:18 +0000 (16:39 +0200)]
[S390] Remove diag 0x260 call from memory detection.
The result of the diag 0x260 call is not always what one would expect.
So just remove it.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Jan Glauber [Fri, 1 Aug 2008 14:39:17 +0000 (16:39 +0200)]
[S390] qdio: make sure qdr is aligned to page size
kzalloc does not guarantee the required alignment of qdr to page size,
use get_zeroed_page instead.
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Gerald Schaefer [Fri, 1 Aug 2008 14:39:16 +0000 (16:39 +0200)]
[S390] Add support for memory hot-remove.
This patch enables memory hot-remove on s390.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Fri, 1 Aug 2008 14:39:15 +0000 (16:39 +0200)]
[S390] Wire up new syscalls.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Michael Ernst [Fri, 1 Aug 2008 14:39:14 +0000 (16:39 +0200)]
[S390] cio: Memory allocation for idset changed.
Memory allocation for the quite huge idset changed from
kzalloc to vmalloc.
Signed-off-by: Michael Ernst <mernst@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Frank Blaschka [Fri, 1 Aug 2008 14:39:13 +0000 (16:39 +0200)]
[S390] qeth: preallocated qeth header for hiper socket
For hiper socket devices this patch will economize the reallocation
of the tx skb data segment by allocating separate memory for the qdio
transport information (qeth header).
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky [Fri, 1 Aug 2008 14:39:12 +0000 (16:39 +0200)]
[S390] Optimize storage key operations for anon pages
For anonymous pages without a swap cache backing the check in
page_remove_rmap for the physical dirty bit in page_remove_rmap is
unnecessary. The instructions that are used to check and reset the dirty
bit are expensive. Removing the check noticably speeds up process exit.
In addition the clearing of the dirty bit in __SetPageUptodate is
pointless as well. With these two changes there is no storage key
operation for an anonymous page anymore if it does not hit the swap
space.
The micro benchmark which repeatedly executes an empty shell script
gets about 5% faster.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Fri, 1 Aug 2008 14:39:11 +0000 (16:39 +0200)]
[S390] nohz/sclp: disable timer on synchronous waits.
sclp_sync_wait wait synchronously for an sclp interrupt and disables
timer interrupts. However on the irq enter paths there is an extra
check if a timer interrupt would be due and calls the timer callback.
This would schedule softirqs in the wrong context.
So introduce local_tick_enable/disable which prevents this.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Michael Holzheu [Fri, 1 Aug 2008 14:39:10 +0000 (16:39 +0200)]
[S390] ipl: Reboot from alternate device does not work when booting from file
During startup we check if diag308 works using diag 308 subcode 6,
which stores the actual ipl information. This fails with rc = 0x102, if
the system has been ipled from the HMC using load from CD or load from file.
In the case of rc = 0x102 we have to assume that diag 308 is working,
since it still can be used to ipl from an alternative device.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Stefan Weinhuber [Fri, 1 Aug 2008 14:39:09 +0000 (16:39 +0200)]
[S390] dasd: Add support for enhanced VM UID
When z/VM provides two virtual devices (minidisks) that reside on the
same real device, both will receive the configuration data from the
real device and thus get the same uid. To fix this problem, z/VM
provides an additional configuration data record that allows to
distinguish between minidisks.
z/VM APAR VM64273 needs be installed so this fix has an effect.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Fri, 1 Aug 2008 14:39:08 +0000 (16:39 +0200)]
[S390] Remove last P390 trace.
Seems like I forgot this hunk...
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Harvey Harrison [Wed, 30 Jul 2008 19:34:57 +0000 (12:34 -0700)]
[MTD] [NAND] diskonchip.c fix sparse endian warnings
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Andrew Morton [Wed, 30 Jul 2008 19:34:56 +0000 (12:34 -0700)]
[MTD] [NAND] drivers/mtd/nand/nandsim.c needs div64.h
drivers/mtd/nand/nandsim.c: In function 'divide':
drivers/mtd/nand/nandsim.c:462: error: implicit declaration of function 'do_div'
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jason Wessel [Fri, 1 Aug 2008 13:39:35 +0000 (08:39 -0500)]
kgdb: fix gdb serial thread queries
The command "info threads" did not work correctly with kgdb. It would
result in a silent kernel hang if used.
This patach addresses several problems.
- Fix use of deprecated NR_CPUS
- Fix kgdb to not walk linearly through the pid space
- Correctly implement shadow pids
- Change the threads per query to a #define
- Fix kgdb_hex2long to work with negated values
The threads 0 and -1 are reserved to represent the current task. That
means that CPU 0 will start with a shadow thread id of -2, and CPU 1
will have a shadow thread id of -3, etc...
From the debugger you can switch to a shadow thread to see what one of
the other cpus was doing, however it is not possible to execute run
control operations on any other cpu execept the cpu executing the
kgdb_handle_exception().
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jason Wessel [Fri, 1 Aug 2008 13:39:34 +0000 (08:39 -0500)]
kgdb: fix kgdb_validate_break_address to perform a mem write
A regression to the kgdb core was found in the case of using the
CONFIG_DEBUG_RODATA kernel option. When this option is on, a breakpoint
cannot be written into any readonly memory page. When an external
debugger requests a breakpoint to get set, the
kgdb_validate_break_address() was only checking to see if the address
to place the breakpoint was readable and lacked a write check.
This patch changes the validate routine to try reading (via the
breakpoint set request) and also to try immediately writing the break
point. If either fails, an error is correctly returned and the
debugger behaves correctly. Then an end user can make the
descision to use hardware breakpoints.
Also update the documentation to reflect that using
CONFIG_DEBUG_RODATA will inhibit the use of software breakpoints.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jason Wessel [Fri, 1 Aug 2008 13:39:34 +0000 (08:39 -0500)]
kgdb: remove the requirement for CONFIG_FRAME_POINTER
There is no technical reason that the kgdb core requires frame
pointers. It is up to the end user of KGDB to decide if they need
them or not.
[ anemo@mba.ocn.ne.jp: removed frame pointers on mips ]
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
David Woodhouse [Fri, 1 Aug 2008 09:07:51 +0000 (10:07 +0100)]
[JFFS2] Fix allocation of summary buffer
We can't use vmalloc for the buffer we use for writing summaries,
because some drivers may want to DMA from it. So limit the size to 64KiB
and use kmalloc for it instead.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Pieter du Preez [Fri, 1 Aug 2008 09:06:40 +0000 (10:06 +0100)]
Fix rename of at91_nand -> atmel_nand
Structs called at91_nand_data where renamed to atmel_nand_data
and configs called *MTD_NAND_AT91* where renamed to
*MTD_NAND_ATMEL*. This was unfortunately not done consistently,
causing NAND chips not being initialised on several ARM boards.
I am aware that the author of the original change did not rename
MTD_NAND_AT91_BUSWIDTH to MTD_NAND_ATMEL_BUSWIDTH, for example.
All *MTD_NAND_AT91* where renamed to *MTD_NAND_ATMEL* in order
to keep naming consistency.
This patch was only tested on a MACH_SAM9_L9260, as this is the
only ARM board I have to my disposal.
Before this patch:
$ git-ls-files |xargs grep atmel_nand |wc -l
105
$ git-ls-files |xargs grep at91_nand |wc -l
4
$ git-ls-files |xargs grep MTD_NAND_ATMEL |wc -l
8
$ git-ls-files |xargs grep MTD_NAND_AT91 |wc -l
47
After this patch:
$ git-ls-files |xargs grep atmel_nand |wc -l
109
$ git-ls-files |xargs grep at91_nand |wc -l
0
$ git-ls-files |xargs grep MTD_NAND_ATMEL |wc -l
55
$ git-ls-files |xargs grep MTD_NAND_AT91 |wc -l
0
Signed-off-by: Pieter du Preez <pdupreez@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Adam Langley [Fri, 1 Aug 2008 04:36:07 +0000 (21:36 -0700)]
tcp: MD5: Fix IPv6 signatures
Reported by Stefanos Harhalakis; although 2.6.27-rc1 talks to itself using IPv6
TCP MD5 packets just fine, Stefanos noted that tcpdump claimed that the
signatures were invalid.
I broke this in
49a72dfb8814c2d65bd9f8c9c6daf6395a1ec58d ("tcp: Fix MD5
signatures for non-linear skbs"), it was just a typo.
Note that tcpdump will still sometimes claim that the signatures are incorrect.
A patch to tcpdump has been submitted for this[1].
[1] http://tinyurl.com/6a4fl2
Signed-off-by: Adam Langley <agl@imperialviolet.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Fri, 1 Aug 2008 03:52:08 +0000 (20:52 -0700)]
skbuff: add missing kernel-doc for do_not_encrypt
Add missing kernel-doc notation to sk_buff:
Warning(linux-2.6.27-rc1-git2//include/linux/skbuff.h:345): No description found for parameter 'do_not_encrypt'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ingo Molnar [Fri, 1 Aug 2008 03:51:22 +0000 (20:51 -0700)]
net/ipv4/route.c: fix build error
fix:
net/ipv4/route.c: In function 'ip_static_sysctl_init':
net/ipv4/route.c:3225: error: 'ipv4_route_path' undeclared (first use in this function)
net/ipv4/route.c:3225: error: (Each undeclared identifier is reported only once
net/ipv4/route.c:3225: error: for each function it appears in.)
net/ipv4/route.c:3225: error: 'ipv4_route_table' undeclared (first use in this function)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>