OSDN Git Service
Nicholas Bellinger [Thu, 7 Mar 2013 08:56:19 +0000 (00:56 -0800)]
iser-target: Add iSCSI Extensions for RDMA (iSER) target driver
This patch adds support for iSCSI Extensions for RDMA target mode,
and includes CQ pooling per isert_device context distributed across
multiple active iser target sessions.
It also uses cmwq process context for RX / TX ib_post_cq() polling
via isert_cq_desc->cq_[rx,tx]_work invoked by isert_cq_[rx,tx]_callback()
hardIRQ context callbacks.
v5 changes:
- Use ISER_RECV_DATA_SEG_LEN instead of hardcoded value in ISER_RX_PAD_SIZE (Or)
- Fix make W=1 warnings (Or)
- Add missing depends on NET && INFINIBAND_ADDR_TRANS in Kconfig (Randy + Or)
- Make isert_device_find_by_ib_dev() return proper ERR_PTR (Wei Yongjun)
- Properly setup iscsi_np->np_sockaddr in isert_setup_np() (Shlomi + nab)
- Add special case for early ISCSI_OP_SCSI_CMD exception handling (nab)
v4 changes:
- Mark isert_cq_rx_work as static (Or)
- Drop unnecessary ib_dma_sync_single_for_cpu + ib_dma_sync_single_for_device
calls for isert_cmd->sense_buf_dma from isert_put_response (Or)
- Use 12288 for ISER_RX_PAD_SIZE base to save extra page per
struct iser_rx_desc (Or + nab)
- Drop now unnecessary isert_rx_desc usage, and convert RX users to
iser_rx_desc (Or + nab)
- Move isert_[alloc,free]_rx_descriptors() ahead of
isert_create_device_ib_res() usage (nab)
- Mark isert_cq_[rx,tx]_callback() + prototypes as static
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_create_device_ib_res on powerpc allmodconfig (fengguang + nab)
- Fix 'warning: 'ret' may be used uninitialized' warning for
isert_connect_request on i386 allyesconfig (fengguang + nab)
- Fix pr_debug conversion specification in isert_rx_completion()
(fengguang + nab)
- Drop unnecessary isert_conn->conn_cm_id != NULL check in
isert_connect_release causing the build warning:
"variable dereferenced before check 'isert_conn->conn_cm_id'"
- Fix isert_lid + isert_np leak in isert_setup_np failure path
- Add isert_conn->conn_wait_comp_err usage in isert_free_conn()
for isert_cq_comp_err completion path
- Add isert_conn->logout_posted bit to determine decrement of
isert_conn->post_send_buf_count from logout response completion
- Always set ISER_CONN_DOWN from isert_disconnect_work() callback
v3 changes:
- Convert to use per isert_cq_desc->cq_[rx,tx]_work + drop tasklets (Or + nab)
- Move IB_EVENT_QP_LAST_WQE_REACHED warn into correct
isert_qp_event_callback (Or)
- Drop unnecessary IB_ACCESS_REMOTE_* access flag usage in
isert_create_device_ib_res (Or)
- Add common isert_init_send_wr(), and convert isert_put_* calls (Or)
- Move to verbs+core logic to single ib_isert.[c,h] (Or + nab)
- Add kmem_cache isert_cmd_cache usage for descriptor allocation (nab)
- Move common ib_post_send() logic used by isert_put_*() to
isert_post_response() (nab)
- Add isert_put_reject call in isert_response_queue() for posting
ISCSI_REJECT response. (nab)
- Add ISTATE_SEND_REJECT checking in isert_do_control_comp. (nab)
v2 changes:
- Drop unused ISERT_ADDR_ROUTE_TIMEOUT define
- Add rdma_notify() call for IB_EVENT_COMM_EST in isert_qp_event_callback()
- Make isert_query_device() less verbose
- Drop unused RDMA_CM_EVENT_ADDR_ERROR and RDMA_CM_EVENT_ROUTE_ERROR
cases from isert_cma_handler()
- Drop unused rdma/ib_fmr_pool.h include
- Update isert_conn_setup_qp() to assign cq based upon least used
- Add isert_create_device_ib_res() to setup PD, CQs and MRs for each
underlying struct ib_device, instead of using per isert_conn resources.
- Add isert_free_device_ib_res() to release PD, CQs and MRs for each
underlying struct ib_device.
- Add isert_device_find_by_ib_dev()
- Change isert_connect_request() to drop PD, CQs and MRs allocation,
and use isert_device_find_by_ib_dev() instead.
- Add isert_device_try_release()
- Change isert_connect_release() to decrement cq_active_qps, and drop
PD, CQs and MRs resource release.
- Update isert_connect_release() to call isert_device_try_release()
- Make isert_create_device_ib_res() determine device->cqs_used based
upon num_online_cpus()
- Drop misleading isert_dump_ib_wc() usage
- Drop unused rdma/ib_fmr_pool.h include
- Use proper xfer_len for login PDUs in isert_rx_completion()
- Add isert_release_cmd() usage
- Change isert_alloc_cmd() to setup iscsi_cmd.release_cmd() pointer
- Change isert_put_cmd() to perform per iscsi_opcode specific release
logic
- Add isert_unmap_cmd() call for ISCSI_OP_SCSI_CMD from isert_put_cmd()
- Change isert_send_completion() to call
atomic_dec(&isert_conn->post_send_buf_count)
based upon per iscsi_opcode logic
- Drop ISTATE_REMOVE processing from isert_immediate_queue()
- Drop ISTATE_SEND_DATAIN processing from isert_response_queue()
- Drop ISTATE_SEND_STATUS processing from isert_response_queue()
- Drop iscsit_transport->iscsit_unmap_cmd() and ->iscsit_free_cmd()
- Convert iser_cq_tx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_tx_callback() to use struct isert_cq_desc pooling
logic
- Convert iser_cq_rx_tasklet() to use struct isert_cq_desc pooling logic
- Convert isert_cq_rx_callback() to use struct isert_cq_desc pooling
logic
- Add explict iscsit_stop_dataout_timer() call to
isert_do_rdma_read_comp()
- Use isert_get_dataout() for iscsit_transport->iscsit_get_dataout()
caller
- Drop ISTATE_SEND_R2T processing from isert_immediate_queue()
- Drop unused rdma/ib_fmr_pool.h include
- Drop isert_cmd->cmd_kref in favor of se_cmd->cmd_kref usage
- Add struct isert_device in order to support multiple EQs + CQ pooling
- Add struct isert_cq_desc
- Drop tasklets and cqs from isert_conn
- Bump ISERT_MAX_CQ to 64
- Various minor checkpatch fixes
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Thu, 25 Apr 2013 07:35:23 +0000 (15:35 +0800)]
tcm_vhost: Enable VIRTIO_SCSI_F_HOTPLUG
Everything for hotplug is ready. Let's enable the feature bit.
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Thu, 25 Apr 2013 07:35:22 +0000 (15:35 +0800)]
tcm_vhost: Add ioctl to get and set events missed flag
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Thu, 25 Apr 2013 07:35:21 +0000 (15:35 +0800)]
tcm_vhost: Add hotplug/hotunplug support
In commit
365a7150094 ([SCSI] virtio-scsi: hotplug support for
virtio-scsi), hotplug support is added to virtio-scsi.
This patch adds hotplug and hotunplug support to tcm_vhost.
You can create or delete a LUN in targetcli to hotplug or hotunplug a
LUN in guest.
Signed-off-by: Asias He <asias@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Thu, 25 Apr 2013 07:35:20 +0000 (15:35 +0800)]
tcm_vhost: Refactor the lock nesting rule
We want to use tcm_vhost_mutex to make sure hotplug/hotunplug will not
happen when set_endpoint/clear_endpoint is in process.
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Mark Rustad [Mon, 22 Apr 2013 16:49:55 +0000 (09:49 -0700)]
tcm_fc: Check for aborted sequence
Add a check for an aborted sequence, which has a
NULL sequence pointer, to avoid target crashes.
The most relevant messages from the crash (entered
from video capture) include:
BUG: unable to handle kernel paging request at
ffffffffffffffdf
IP: [<
ffffffffa02d514c>] fc_seq_send+0x3c/0x150 [libfc]
...
Call Trace:
[<
ffffffffa0443de6>] ft_queue_data_in+0x266/0x560 [tcm_fc]
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Thu, 7 Mar 2013 06:20:36 +0000 (22:20 -0800)]
iscsi-target: Add iser network portal attribute
This patch adds a new network portal attribute for iser, that lives
under existing iscsi-target configfs layout at:
/sys/kernel/config/target/iscsi/$TARGETNAME/$TPGT/np/$PORTAL/iser
When lio_target_np_store_iser() is enabled, iscsit_tpg_add_network_portal()
will attempt to start an rdma_cma network portal for iser-target, only if
the external ib_isert module transport has been loaded.
When disabled, iscsit_tpg_del_network_portal() will cease iser login service
on the network portal, and release any external ib_isert module reference.
v4 changes:
- Add request_module for ib_isert to lio_target_np_store_iser()
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Wed, 20 Mar 2013 22:29:15 +0000 (15:29 -0700)]
iscsi-target: Refactor TX queue logic + export response PDU creation
This patch refactors TX immediate + response queue handling to use
the new iscsit_transport API callers, and exports the necessary
traditional iscsi PDU response creation functions for iser-target
to utilize.
This includes:
- Add iscsit_build_datain_pdu() for DATAIN PDU init + convert
iscsit_build_datain_pdu()
- Add iscsit_build_logout_rsp() for LOGOUT_RSP PDU init + convert
iscsit_send_logout()
- Add iscsit_build_nopin_rsp() for NOPIN_RSP PDU init + convert
iscsit_send_nopin()
- Add iscsit_build_rsp_pdu() for SCSI_RSP PDU init + convert
iscsit_send_response()
- Add iscsit_build_task_mgt_rsp for TM_RSP PDU init + convert
iscsit_send_task_mgt_rsp()
- Refactor immediate queue state switch into iscsit_immediate_queue()
- Convert handle_immediate_queue() to use iscsit_transport caller
- Refactor response queue state switch into iscsit_response_queue()
- Convert handle_response_queue to use iscsit_transport caller
- Export iscsit_logout_post_handler(), iscsit_increment_maxcmdsn()
and iscsit_tmr_post_handler() for external transport module usage
v5 changes:
- Fix solicited NopIN handling with RDMAExtensions=No (nab)
v3 changes:
- Add iscsit_build_reject for REJECT PDU init + convert
iscsit_send_reject()
v2 changes:
- Add iscsit_queue_rsp() for iscsit_transport->iscsit_queue_data_in()
and iscsit_transport->iscsit_queue_status()
- Update lio_queue_data_in() to use ->iscsit_queue_data_in()
- Update lio_queue_status() to use ->iscsit_queue_status()
- Use mutex_trylock() in iscsit_increment_maxcmdsn()
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Thu, 7 Mar 2013 06:18:24 +0000 (22:18 -0800)]
iscsi-target: Refactor RX PDU logic + export request PDU handling
This patch refactors existing traditional iscsi RX side PDU handling
to use iscsit_transport, and exports the necessary logic for external
transport modules.
This includes:
- Refactor iscsit_handle_scsi_cmd() into PDU setup / processing
- Add updated iscsit_handle_scsi_cmd() for tradtional iscsi code
- Add iscsit_set_unsoliticed_dataout() wrapper
- Refactor iscsit_handle_data_out() into PDU check / processing
- Add updated iscsit_handle_data_out() for tradtional iscsi code
- Add iscsit_handle_nop_out() + iscsit_handle_task_mgt_cmd() to
accept pre-allocated struct iscsi_cmd
- Add iscsit_build_r2ts_for_cmd() caller for iscsi_target_transport
to handle ISTATE_SEND_R2T for TX immediate queue
- Refactor main traditional iscsi iscsi_target_rx_thread() PDU switch
into iscsi_target_rx_opcode() using iscsit_allocate_cmd()
- Turn iscsi_target_rx_thread() process context into NOP for
ib_isert side work-queue.
v5 changes:
- Make iscsit_handle_scsi_cmd() static (Fengguang)
- Fix iscsit_handle_scsi_cmd() exception se_cmd leak (nab)
v3 changes:
- Add extra target_put_sess_cmd call in iscsit_add_reject_from_cmd
after completion
v2 changes:
- Disable iscsit_ack_from_expstatsn() usage for RDMAExtentions=Yes
- Disable iscsit_allocate_datain_req() usage for RDMAExtentions=Yes
- Add target_get_sess_cmd() reference counting to
iscsit_setup_scsi_cmd()
- Add TFO->lio_check_stop_free() fabric API caller
- Add export of iscsit_stop_dataout_timer() symbol
- Add iscsit_build_r2ts_for_cmd() for iscsit_transport->iscsit_get_dataout()
- Convert existing usage of iscsit_build_r2ts_for_cmd() to
->iscsit_get_dataout()
- Drop RDMAExtentions=Yes specific check in iscsit_build_r2ts_for_cmd()
- Fix RDMAExtentions -> RDMAExtensions typo (andy)
- Pass correct dump_payload value into iscsit_get_immediate_data()
for iscsit_handle_scsi_cmd()
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Thu, 7 Mar 2013 06:09:17 +0000 (22:09 -0800)]
iscsi-target: Add per transport iscsi_cmd alloc/free
This patch converts struct iscsi_cmd memory allocation + free to use
->iscsit_alloc_cmd() iscsit_transport API caller, and export
iscsit_allocate_cmd() symbols
Also add iscsi_cmd->release_cmd() to be used seperately from
iscsit_transport for connection/session shutdown.
v2 changes:
- Remove unnecessary checks in iscsit_alloc_cmd (asias)
- Drop iscsit_transport->iscsit_free_cmd() usage
- Drop iscsit_transport->iscsit_unmap_cmd() usage
- Add iscsi_cmd->release_cmd()
- Convert lio_release_cmd() to use iscsi_cmd->release_cmd()
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Thu, 7 Mar 2013 05:54:38 +0000 (21:54 -0800)]
iscsi-target: Add iser-target parameter keys + setup during login
This patch adds RDMAExtensions, InitiatorRecvDataSegmentLength and
TargetRecvDataSegmentLength parameters keys necessary for iser-target
login to occur.
This includes setting the necessary parameters during login path
code within iscsi_login_zero_tsih_s2(), and currently PAGE_SIZE
aligning the target's advertised MRDSL for immediate data and
unsolicited data-out incoming payloads.
v3 changes:
- Add iscsi_post_login_start_timers FIXME for ISER
v2 changes:
- Fix RDMAExtentions -> RDMAExtensions typo (andy)
- Drop unnecessary '== true' conditional checks for type bool
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Thu, 7 Mar 2013 05:54:13 +0000 (21:54 -0800)]
iscsi-target: Initial traditional TCP conversion to iscsit_transport
This patch performs the initial conversion of existing traditional iscsi
to use iscsit_transport API callers. This includes:
- iscsi-np cleanups for iscsit_transport_type
- Add iscsi-np transport calls w/ ->iscsit_setup_up() and ->iscsit_free_np()
- Convert login thread process context to use ->iscsit_accept_np() for
connections with pre-allocated struct iscsi_conn
- Convert existing socket accept code to iscsit_accept_np()
- Convert login RX/TX callers to use ->iscsit_get_login_rx() and
->iscsit_put_login_tx() to exchange request/response PDUs
- Convert existing socket login RX/TX calls into iscsit_get_login_rx()
and iscsit_put_login_tx()
- Change iscsit_close_connection() to invoke ->iscsit_free_conn() +
iscsit_put_transport() calls.
- Add iscsit_register_transport() + iscsit_unregister_transport() calls
to module init/exit
v4 changes:
- Add missing iscsit_put_transport() call in iscsi_target_setup_login_socket()
failure case
v2 changes:
- Update module init/exit to use register_transport() + unregister_transport()
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Thu, 7 Mar 2013 05:53:26 +0000 (21:53 -0800)]
iscsi-target: Add iscsit_transport API template
Add basic struct iscsit_transport API template to allow iscsi-target for
running with external transport modules using existing iscsi_target_core.h
code.
For all external modules, this calls try_module_get() and module_put()
to obtain + release an external iscsit_transport module reference count.
Also include the iscsi-target symbols necessary in iscsi_transport.h to
allow external transport modules to function.
v3 changes:
- Add iscsit_build_reject export for ISTATE_SEND_REJECT usage
v2 changes:
- Drop unnecessary export of iscsit_get_transport + iscsit_put_transport (roland)
- Add ->iscsit_queue_data_in() to remove extra context switch on RDMA_WRITE
- Add ->iscsit_queue_status() to remove extra context switch on IB_SEND status
- Add ->iscsit_get_dataout() to remove extra context switch on RDMA_READ
- Drop ->iscsit_free_cmd()
- Drop ->iscsit_unmap_cmd()
- Rename iscsit_create_transport() -> iscsit_register_transport() (andy)
- Rename iscsit_destroy_transport() -> iscsit_unregister_transport() (andy)
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Fri, 22 Mar 2013 05:54:28 +0000 (22:54 -0700)]
target: Add export of target_get_sess_cmd symbol
Export target_get_sess_cmd() symbol so that it can be used by
iscsi-target.
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Jörn Engel [Mon, 18 Mar 2013 22:30:31 +0000 (18:30 -0400)]
target: Change default sense key of NOT_READY
As the comment sais, this allows Solaris initiators to survive
intermittent errors. The comment from someone reading the Solaris
sources seem to imply that multipathing would be broken without this
patch as well.
Signed-off-by: Joern Engel <joern@logfs.org>
Cc: Brian Bunker <brian@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Thu, 25 Apr 2013 02:38:11 +0000 (19:38 -0700)]
target/file: Set is_nonrot attribute
Set is_nonrot attribute according to the block queue if the backend
device is a block device.
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Mon, 25 Feb 2013 06:03:46 +0000 (14:03 +0800)]
target: Add sbc_execute_unmap() helper
iblock_execute_unmap() and fd_execute_unmap share a lot of code.
Add sbc_execute_unmap() helper to remove duplicated code for
iblock_execute_unmap() and fd_execute_unmap().
Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Mon, 25 Feb 2013 06:03:45 +0000 (14:03 +0800)]
target/iblock: Add iblock_do_unmap() helper
Add helper iblock_do_unmap() to remove duplicated code in
iblock_execute_write_same_unmap() and iblock_execute_unmap().
Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Mon, 25 Feb 2013 06:03:44 +0000 (14:03 +0800)]
target/file: Add fd_do_unmap() helper
Add helper fd_do_unmap() to remove duplicated code in
fd_execute_write_same_unmap() and fd_execute_unmap().
Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Mon, 25 Feb 2013 06:03:43 +0000 (14:03 +0800)]
target/file: Add UNMAP emulation support
This patch adds support for emulation of UNMAP within
fd_execute_unmap() backend code.
If the FILEIO backend is normal file, the emulation uses fallocate to
punch hole to reclaim the free space used by the file. If the FILEIO
backend is block device, the emulation uses blkdev_issue_discard().
Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Mon, 25 Feb 2013 06:03:42 +0000 (14:03 +0800)]
target/file: Add WRITE_SAME w/ UNMAP=1 emulation support
This patch adds support for emulation of WRITE_SAME w/ UNMAP=1 within
fd_execute_write_same_unmap() backend code.
If the FILEIO backend is normal file, the emulation uses fallocate to
punch hole to reclaim the free space used by the file. If the FILEIO
backend is block device, the emulation uses blkdev_issue_discard().
Tested with 512, 1k, 2k, and 4k block_sizes.
Changes in v2:
- Set the various dev->dev_attrib.*unmap* values (nab)
Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Jörn Engel [Mon, 18 Mar 2013 22:29:53 +0000 (18:29 -0400)]
qla2xxx: Remove unused function
It was already unused when first introduced in
2d70c103.
Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Wei Yongjun [Mon, 11 Mar 2013 13:48:28 +0000 (21:48 +0800)]
tcm_fc: using kfree_rcu() to simplify the code
The callback function of call_rcu() just calls a kfree(), so we
can use kfree_rcu() instead of call_rcu() + callback function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Andy Grover [Mon, 4 Mar 2013 21:52:08 +0000 (13:52 -0800)]
target/iscsi: Use ISCSI_LOGIN_CURRENT/NEXT_STAGE macros
Fix bit-clearing in login_rsp->flags for case 0.
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Andy Grover [Mon, 4 Mar 2013 21:52:07 +0000 (13:52 -0800)]
target/iscsi: Remove chap_set_random()
The result from get_random_bytes should already be random, so further
manipulation and mixing should not be needed.
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Wed, 10 Apr 2013 22:00:27 +0000 (15:00 -0700)]
target: Fix incorrect fallthrough of ALUA Standby/Offline/Transition CDBs
This patch fixes a bug where a handful of informational / control CDBs
that should be allowed during ALUA access state Standby/Offline/Transition
where incorrectly returning CHECK_CONDITION + ASCQ_04H_ALUA_TG_PT_*.
This includes INQUIRY + REPORT_LUNS, which would end up preventing LUN
registration when LUN scanning occured during these ALUA access states.
Cc: Hannes Reinecke <hare@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Wed, 10 Apr 2013 07:06:16 +0000 (15:06 +0800)]
tcm_vhost: Send bad target to guest when cmd fails
Send bad target to guest in case:
1) we can not allocate the cmd
2) fail to submit the cmd
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Wed, 10 Apr 2013 07:06:15 +0000 (15:06 +0800)]
tcm_vhost: Add vhost_scsi_send_bad_target() helper
Share the send bad target code with other use cases.
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Wed, 10 Apr 2013 07:06:14 +0000 (15:06 +0800)]
tcm_vhost: Fix tv_cmd leak in vhost_scsi_handle_vq
If we fail to submit the allocated tv_vmd to tcm_vhost_submission_work,
we will leak the tv_vmd. Free tv_vmd on fail path.
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Wed, 10 Apr 2013 07:06:13 +0000 (15:06 +0800)]
tcm_vhost: Remove double check of response
We did the length of response check twice.
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Wed, 3 Apr 2013 06:17:38 +0000 (14:17 +0800)]
tcm_vhost: Initialize vq->last_used_idx when set endpoint
This patch fixes guest hang when booting seabios and guest.
[ 0.576238] scsi0 : Virtio SCSI HBA
[ 0.616754] virtio_scsi virtio1: request:id 0 is not a head!
vq->last_used_idx is initialized only when /dev/vhost-scsi is
opened or closed.
vhost_scsi_open -> vhost_dev_init() -> vhost_vq_reset()
vhost_scsi_release() -> vhost_dev_cleanup -> vhost_vq_reset()
So, when guest talks to tcm_vhost after seabios does, vq->last_used_idx
still contains the old valule for seabios. This confuses guest.
Fix this by calling vhost_init_used() to init vq->last_used_idx when
we set endpoint.
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Wed, 3 Apr 2013 06:17:37 +0000 (14:17 +0800)]
tcm_vhost: Use vq->private_data to indicate if the endpoint is setup
Currently, vs->vs_endpoint is used indicate if the endpoint is setup or
not. It is set or cleared in vhost_scsi_set_endpoint() or
vhost_scsi_clear_endpoint() under the vs->dev.mutex lock. However, when
we check it in vhost_scsi_handle_vq(), we ignored the lock.
Instead of using the vs->vs_endpoint and the vs->dev.mutex lock to
indicate the status of the endpoint, we use per virtqueue
vq->private_data to indicate it. In this way, we can only take the
vq->mutex lock which is per queue and make the concurrent multiqueue
process having less lock contention. Further, in the read side of
vq->private_data, we can even do not take the lock if it is accessed in
the vhost worker thread, because it is protected by "vhost rcu".
(nab: Do s/VHOST_FEATURES/~VHOST_SCSI_FEATURES)
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Tue, 2 Apr 2013 15:31:37 +0000 (23:31 +0800)]
tcm_vhost: Use ACCESS_ONCE for vs->vs_tpg[target] access
In vhost_scsi_handle_vq:
tv_tpg = vs->vs_tpg[target];
if (!tv_tpg) {
....
return
}
tv_cmd = vhost_scsi_allocate_cmd(tv_tpg, &v_req,
1) vs->vs_tpg[target] might change after the NULL check and 2) the above
line might access tv_tpg from vs->vs_tpg[target]. To prevent 2), use
ACCESS_ONCE. Thanks mst for catching this up!
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Fri, 29 Mar 2013 06:06:00 +0000 (23:06 -0700)]
target: Fix RESERVATION_CONFLICT status regression for iscsi-target special case
This patch fixes a regression introduced in v3.8-rc1 code where a failed
target_check_reservation() check in target_setup_cmd_from_cdb() was causing
an incorrect SAM_STAT_GOOD status to be returned during a WRITE operation
performed by an unregistered / unreserved iscsi initiator port.
This regression is only effecting iscsi-target due to a special case check
for TCM_RESERVATION_CONFLICT within iscsi_target_erl1.c:iscsit_execute_cmd(),
and was still correctly disallowing WRITE commands from backend submission
for unregistered / unreserved initiator ports, while returning the incorrect
SAM_STAT_GOOD status due to the missing SAM_STAT_RESERVATION_CONFLICT
assignment.
This regression was first introduced with:
commit
de103c93aff0bed0ae984274e5dc8b95899badab
Author: Christoph Hellwig <hch@lst.de>
Date: Tue Nov 6 12:24:09 2012 -0800
target: pass sense_reason as a return value
Go ahead and re-add the missing SAM_STAT_RESERVATION_CONFLICT assignment
during a target_check_reservation() failure, so that iscsi-target code
sends the correct SCSI status.
All other fabrics using target_submit_cmd_*() with a RESERVATION_CONFLICT
call to transport_generic_request_failure() are not effected by this bug.
Reported-by: Jeff Leung <jleung@curriegrad2004.ca>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Thu, 28 Mar 2013 00:23:41 +0000 (17:23 -0700)]
tcm_vhost: Avoid VIRTIO_RING_F_EVENT_IDX feature bit
This patch adds a VHOST_SCSI_FEATURES mask minus VIRTIO_RING_F_EVENT_IDX
so that vhost-scsi-pci userspace will strip this feature bit once
GET_FEATURES reports it as being unsupported on the host.
This is to avoid a bug where ->handle_kicks() are missed when EVENT_IDX
is enabled by default in userspace code.
(mst: Rename to VHOST_SCSI_FEATURES + add comment)
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Asias He <asias@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Tue, 19 Mar 2013 04:55:16 +0000 (12:55 +0800)]
target/pscsi: Reject cross page boundary case in pscsi_map_sg
We can only have one page of data in each sg element, so we can not
cross a page boundary. Fail this case.
The 'while (len > 0 && data_len > 0) {}' loop is not necessary. The loop
can only be executed once.
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Mon, 18 Mar 2013 20:15:57 +0000 (13:15 -0700)]
target/file: Bump FD_MAX_SECTORS to 2048 to handle 1M sized I/Os
This patch bumps the default FILEIO backend FD_MAX_SECTORS value from
1024 -> 2048 in order to allow block_size=512 to handle 1M sized I/Os.
The current default rejects I/Os larger than 512K in sbc_parse_cdb():
[12015.915146] SCSI OP 2ah with too big sectors 1347 exceeds backend
hw_max_sectors: 1024
[12015.977744] SCSI OP 2ah with too big sectors 2048 exceeds backend
hw_max_sectors: 1024
This issue is present in >= v3.5 based kernels, introduced after the
removal of se_task logic.
Reported-by: Viljami Ilola <azmulx@netikka.fi>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Fri, 15 Mar 2013 01:14:06 +0000 (09:14 +0800)]
tcm_vhost: Flush vhost_work in vhost_scsi_flush()
We also need to flush the vhost_works. It is the completion vhost_work
currently.
Signed-off-by: Asias He <asias@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Asias He [Fri, 15 Mar 2013 01:14:05 +0000 (09:14 +0800)]
tcm_vhost: Add missed lock in vhost_scsi_clear_endpoint()
tv_tpg->tv_tpg_vhost_count should be protected by tv_tpg->tv_tpg_mutex.
Signed-off-by: Asias He <asias@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Wei Yongjun [Fri, 15 Mar 2013 09:19:26 +0000 (17:19 +0800)]
target: fix possible memory leak in core_tpg_register()
'se_tpg->tpg_lun_list' is malloced in core_tpg_register() and should be freed
before leaving from the error handling cases, otherwise it will cause memory
leak.
'se_tpg' is malloced out of this function, and will be freed if we return error, so
remove free for 'se_tpg'.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Andy Grover [Mon, 4 Mar 2013 21:52:09 +0000 (13:52 -0800)]
target/iscsi: Fix mutual CHAP auth on big-endian arches
See https://bugzilla.redhat.com/show_bug.cgi?id=916290
Used a temp var since we take its address in sg_init_one.
Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Hannes Reinecke [Mon, 4 Mar 2013 13:08:06 +0000 (14:08 +0100)]
target_core_sbc: use noop for SYNCHRONIZE_CACHE
Windows does not expect SYNCHRONIZE_CACHE to be not supported,
and will generate a BSOD upon shutdown when using rd_mcp backend.
So better use a noop here.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Linus Torvalds [Sun, 17 Mar 2013 22:59:32 +0000 (15:59 -0700)]
Linux 3.9-rc3
David Rientjes [Sun, 17 Mar 2013 22:49:10 +0000 (15:49 -0700)]
perf,x86: fix link failure for non-Intel configs
Commit
1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") introduces a link failure since
perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL:
arch/x86/power/built-in.o: In function `restore_processor_state':
(.text+0x45c): undefined reference to `perf_restore_debug_store'
Fix it by defining the dummy function appropriately.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 17 Mar 2013 22:44:43 +0000 (15:44 -0700)]
perf,x86: fix wrmsr_on_cpu() warning on suspend/resume
Commit
1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") fixed a crash when doing PEBS performance profiling
after resuming, but in using init_debug_store_on_cpu() to restore the
DS_AREA mtrr it also resulted in a new WARN_ON() triggering.
init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU
cross-calls to do the MSR update. Which is not really valid at the
early resume stage, and the warning is quite reasonable. Now, it all
happens to _work_, for the simple reason that smp_call_function_single()
ends up just doing the call directly on the CPU when the CPU number
matches, but we really should just do the wrmsr() directly instead.
This duplicates the wrmsr() logic, but hopefully we can just remove the
wrmsr_on_cpu() version eventually.
Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 17 Mar 2013 18:04:14 +0000 (11:04 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"Eric's rcu barrier patch fixes a long standing problem with our
unmount code hanging on to devices in workqueue helpers. Liu Bo
nailed down a difficult assertion for in-memory extent mappings."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix warning of free_extent_map
Btrfs: fix warning when creating snapshots
Btrfs: return as soon as possible when edquot happens
Btrfs: return EIO if we have extent tree corruption
btrfs: use rcu_barrier() to wait for bdev puts at unmount
Btrfs: remove btrfs_try_spin_lock
Btrfs: get better concurrency for snapshot-aware defrag work
Liu Bo [Fri, 15 Mar 2013 14:46:39 +0000 (08:46 -0600)]
Btrfs: fix warning of free_extent_map
Users report that an extent map's list is still linked when it's actually
going to be freed from cache.
The story is that
a) when we're going to drop an extent map and may split this large one into
smaller ems, and if this large one is flagged as EXTENT_FLAG_LOGGING which means
that it's on the list to be logged, then the smaller ems split from it will also
be flagged as EXTENT_FLAG_LOGGING, and this is _not_ expected.
b) we'll keep ems from unlinking the list and freeing when they are flagged with
EXTENT_FLAG_LOGGING, because the log code holds one reference.
The end result is the warning, but the truth is that we set the flag
EXTENT_FLAG_LOGGING only during fsync.
So clear flag EXTENT_FLAG_LOGGING for extent maps split from a large one.
Reported-by: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Linus Torvalds [Sat, 16 Mar 2013 01:06:55 +0000 (18:06 -0700)]
Merge branch 'kbuild' of git://git./linux/kernel/git/mmarek/kbuild
Pull kbuild fix from Michal Marek:
"One fix for for make headers_install/headers_check to not require make
3.81. The requirement has been accidentally introduced in 3.7."
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: fix make headers_check with make 3.80
Linus Torvalds [Sat, 16 Mar 2013 01:05:37 +0000 (18:05 -0700)]
Merge tag 'for-3.9-rc3' of git://openrisc.net/jonas/linux
Pull OpenRISC bug fixes from Jonas Bonn:
- The GPIO descriptor work has exposed how broken the non-GPIOLIB bits
for OpenRISC were. We now require GPIOLIB as this is the preferred
way forward.
- The system.h split introduced a bug in llist.h for arches using
asm-generic/cmpxchg.h directly, which is currently only OpenRISC.
The patch here moves two defines from asm-generic/atomic.h to
asm-generic/cmpxchg.h to make things work as they should.
- The VIRT_TO_BUS selector was added for OpenRISC, but OpenRISC does
not have the virt_to_bus methods, so there's a patch to remove it
again.
* tag 'for-3.9-rc3' of git://openrisc.net/jonas/linux:
openrisc: remove HAVE_VIRT_TO_BUS
asm-generic: move cmpxchg*_local defs to cmpxchg.h
openrisc: require gpiolib
Linus Torvalds [Sat, 16 Mar 2013 01:04:38 +0000 (18:04 -0700)]
Merge tag 'char-misc-3.9-rc2' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg Kroah-Hartman:
"Here are some tiny fixes for the w1 drivers and the final removal
patch for getting rid of CONFIG_EXPERIMENTAL (all users of it are now
gone from your tree, this just drops the Kconfig item itself.)
All have been in the linux-next tree for a while"
* tag 'char-misc-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
final removal of CONFIG_EXPERIMENTAL
w1: fix oops when w1_search is called from netlink connector
w1-gpio: fix unused variable warning
w1-gpio: remove erroneous __exit and __exit_p()
ARM: w1-gpio: fix erroneous gpio requests
Linus Torvalds [Sat, 16 Mar 2013 00:35:49 +0000 (17:35 -0700)]
Merge tag 'sound-3.9' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes, as expected for the middle rc:
- A couple of fixes for potential NULL dereferences and out-of-range
array accesses revealed by static code parsers
- A fix for the wrong error handling detected by trinity
- A regression fix for missing audio on some MacBooks
- CA0132 DSP loader fixes
- Fix for EAPD control of IDT codecs on machines w/o speaker
- Fix a regression in the HD-audio widget list parser code
- Workaround for the NuForce UDH-100 USB audio"
* tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecs
sound: sequencer: cap array index in seq_chn_common_event()
ALSA: hda/ca0132 - Remove extra setting of dsp_state.
ALSA: hda/ca0132 - Check download state of DSP.
ALSA: hda/ca0132 - Check if dspload_image succeeded.
ALSA: hda - Disable IDT eapd_switch if there are no internal speakers
ALSA: hda - Fix snd_hda_get_num_raw_conns() to return a correct value
ALSA: usb-audio: add a workaround for the NuForce UDH-100
ALSA: asihpi - fix potential NULL pointer dereference
ALSA: seq: Fix missing error handling in snd_seq_timer_open()
Linus Torvalds [Sat, 16 Mar 2013 00:35:03 +0000 (17:35 -0700)]
Merge branch 'fixes-for-3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull DMA-mapping fix from Marek Szyprowski:
"An important fix for all ARM architectures which use ZONE_DMA.
Without it dma_alloc_* calls with GFP_ATOMIC flag might have allocated
buffers outsize DMA zone."
* 'fixes-for-3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
ARM: DMA-mapping: add missing GFP_DMA flag for atomic buffer allocation
Linus Torvalds [Sat, 16 Mar 2013 00:34:01 +0000 (17:34 -0700)]
Merge tag 'mfd-fixes-3.9-1' of git://git./linux/kernel/git/sameo/mfd-fixes
Pull MFD fixes from Samuel Ortiz:
"This is the first batch of MFD fixes for 3.9.
With this one we have:
- An ab8500 build failure fix.
- An ab8500 device tree parsing fix.
- A fix for twl4030_madc remove routine to work properly (when
built-in).
- A fix for properly registering palmas interrupt handler.
- A fix for omap-usb init routine to actually write into the
hostconfig register.
- A couple of warning fixes for ab8500-gpadc and tps65912"
* tag 'mfd-fixes-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes:
mfd: twl4030-madc: Remove __exit_p annotation
mfd: ab8500: Kill "reg" property from binding
mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDO
mfd: wm831x: Don't forward declare enum wm831x_auxadc
mfd: twl4030-audio: Fix argument type for twl4030_audio_disable_resource()
mfd: tps65912: Declare and use tps65912_irq_exit()
mfd: palmas: Provide irq flags through DT/platform data
mfd: Make AB8500_CORE select POWER_SUPPLY to fix build error
mfd: omap-usb-host: Actually update hostconfig
Linus Torvalds [Sat, 16 Mar 2013 00:33:13 +0000 (17:33 -0700)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Bug fixes for pmbus, ltc2978, and lineage-pem drivers
Added specific maintainer for some hwmon drivers"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/ltc2978) Fix temperature reporting
hwmon: (pmbus) Fix krealloc() misuse in pmbus_add_attribute()
hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes
MAINTAINERS: Add maintainer for MAX6697, INA209, and INA2XX drivers
Stephane Eranian [Fri, 15 Mar 2013 13:26:07 +0000 (14:26 +0100)]
perf,x86: fix kernel crash with PEBS/BTS after suspend/resume
This patch fixes a kernel crash when using precise sampling (PEBS)
after a suspend/resume. Turns out the CPU notifier code is not invoked
on CPU0 (BP). Therefore, the DS_AREA (used by PEBS) is not restored properly
by the kernel and keeps it power-on/resume value of 0 causing any PEBS
measurement to crash when running on CPU0.
The workaround is to add a hook in the actual resume code to restore
the DS Area MSR value. It is invoked for all CPUS. So for all but CPU0,
the DS_AREA will be restored twice but this is harmless.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Iwai [Fri, 15 Mar 2013 13:23:32 +0000 (14:23 +0100)]
ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecs
During the transition to the generic parser, the hook to the codec
specific automute function was forgotten. This resulted in the silent
output on some MacBooks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dan Carpenter [Fri, 15 Mar 2013 06:14:22 +0000 (09:14 +0300)]
sound: sequencer: cap array index in seq_chn_common_event()
"chn" here is a number between 0 and 255, but ->chn_info[] only has
16 elements so there is a potential write beyond the end of the
array.
If the seq_mode isn't SEQ_2 then we let the individual drivers
(either opl3.c or midi_synth.c) handle it. Those functions all
do a bounds check on "chn" so I haven't changed anything here.
The opl3.c driver has up to 18 channels and not 16.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Arnd Bergmann [Thu, 14 Mar 2013 21:56:38 +0000 (22:56 +0100)]
mfd: twl4030-madc: Remove __exit_p annotation
4740f73fe5 "mfd: remove use of __devexit" removed the __devexit annotation
on the twl4030_madc_remove function, but left an __exit_p() present on the
pointer to this function. Using __exit_p was as wrong with the devexit in
place as it is now, but now we get a gcc warning about an unused function.
In order for the twl4030_madc_remove to work correctly in built-in code, we
have to remove the __exit_p.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Dylan Reid [Fri, 15 Mar 2013 00:27:46 +0000 (17:27 -0700)]
ALSA: hda/ca0132 - Remove extra setting of dsp_state.
spec->dsp_state is initialized to DSP_DOWNLOAD_INIT, no need to reset
and check it in ca0132_download_dsp().
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dylan Reid [Fri, 15 Mar 2013 00:27:45 +0000 (17:27 -0700)]
ALSA: hda/ca0132 - Check download state of DSP.
Instead of using the dspload_is_loaded() function, check the dsp_state
that is kept in the spec. The dspload_is_loaded() function returns
true if the DSP transfer was never started. This false-positive leads
to multiple second delays when ca0132_setup_efaults() times out on
each write.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dylan Reid [Fri, 15 Mar 2013 00:27:44 +0000 (17:27 -0700)]
ALSA: hda/ca0132 - Check if dspload_image succeeded.
If dspload_image() fails, it was ignored and dspload_wait_loaded() was
still called. dsp_loaded should never be set to true in this case,
skip it. The check in dspload_wait_loaded() return true if the DSP is
loaded or if it never started.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Michel Lespinasse [Thu, 14 Mar 2013 23:50:02 +0000 (16:50 -0700)]
mm/fremap.c: fix possible oops on error path
The vm_flags introduced in
6d7825b10dbe ("mm/fremap.c: fix oops on error
path") is supposed to avoid a compiler warning about unitialized
vm_flags without changing the generated code.
However I am concerned that this is going to be very brittle, and fail
with some compiler versions. The failure could be either of:
- compiler could actually load vma->vm_flags before checking for the
!vma condition, thus reintroducing the oops
- compiler could optimize out the !vma check, since the pointer just got
dereferenced shortly before (so the compiler knows it can't be NULL!)
I propose reversing this part of the change and initializing vm_flags to 0
just to avoid the bogus uninitialized use warning.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 14 Mar 2013 21:53:07 +0000 (14:53 -0700)]
Merge branch 'rcu/urgent' of git://git./linux/kernel/git/paulmck/linux-rcu
Pull fix for hlist_entry_safe() regression from Paul McKenney:
"This contains a single commit that fixes a regression in
hlist_entry_safe(). This macro references its argument twice, which
can cause NULL-pointer errors. This commit applies a gcc statement
expression, creating a temporary variable to avoid the double
reference. This has been posted to LKML at
https://lkml.org/lkml/2013/3/9/75.
Kudos to CAI Qian, whose testing uncovered this, to Eric Dumazet, who
spotted root cause, and to Li Zefan, who tested this commit."
* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
list: Fix double fetch of pointer in hlist_entry_safe()
Paul E. McKenney [Sat, 9 Mar 2013 15:38:41 +0000 (07:38 -0800)]
list: Fix double fetch of pointer in hlist_entry_safe()
The current version of hlist_entry_safe() fetches the pointer twice,
once to test for NULL and the other to compute the offset back to the
enclosing structure. This is OK for normal lock-based use because in
that case, the pointer cannot change. However, when the pointer is
protected by RCU (as in "rcu_dereference(p)"), then the pointer can
change at any time. This use case can result in the following sequence
of events:
1. CPU 0 invokes hlist_entry_safe(), fetches the RCU-protected
pointer as sees that it is non-NULL.
2. CPU 1 invokes hlist_del_rcu(), deleting the entry that CPU 0
just fetched a pointer to. Because this is the last entry
in the list, the pointer fetched by CPU 0 is now NULL.
3. CPU 0 refetches the pointer, obtains NULL, and then gets a
NULL-pointer crash.
This commit therefore applies gcc's "({ })" statement expression to
create a temporary variable so that the specified pointer is fetched
only once, avoiding the above sequence of events. Please note that
it is the caller's responsibility to use rcu_dereference() as needed.
This allows RCU-protected uses to work correctly without imposing
any additional overhead on the non-RCU case.
Many thanks to Eric Dumazet for spotting root cause!
Reported-by: CAI Qian <caiqian@redhat.com>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Li Zefan <lizefan@huawei.com>
Linus Torvalds [Thu, 14 Mar 2013 19:11:28 +0000 (12:11 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs
Pull ext2, ext3, reiserfs, quota fixes from Jan Kara:
"A fix for regression in ext2, and a format string issue in ext3. The
rest isn't too serious."
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Fix BUG_ON in evict() on inode deletion
reiserfs: Use kstrdup instead of kmalloc/strcpy
ext3: Fix format string issues
quota: add missing use of dq_data_lock in __dquot_initialize
Liu Bo [Wed, 13 Mar 2013 13:43:03 +0000 (07:43 -0600)]
Btrfs: fix warning when creating snapshots
Creating snapshot passes extent_root to commit its transaction,
but it can lead to the warning of checking root for quota in
the __btrfs_end_transaction() when someone else is committing
the current transaction. Since we've recorded the needed root
in trans_handle, just use it to get rid of the warning.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Wang Shilong [Wed, 6 Mar 2013 11:51:47 +0000 (11:51 +0000)]
Btrfs: return as soon as possible when edquot happens
If one of qgroup fails to reserve firstly, we should return immediately,
it is unnecessary to continue check.
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik [Fri, 8 Mar 2013 20:41:02 +0000 (15:41 -0500)]
Btrfs: return EIO if we have extent tree corruption
The callers of lookup_inline_extent_info all handle getting an error back
properly, so return an error if we have corruption instead of being a jerk and
panicing. Still WARN_ON() since this is kind of crucial and I've been seeing it
a bit too much recently for my taste, I think we're doing something wrong
somewhere. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Eric Sandeen [Sat, 9 Mar 2013 15:18:39 +0000 (15:18 +0000)]
btrfs: use rcu_barrier() to wait for bdev puts at unmount
Doing this would reliably fail with -EBUSY for me:
# mount /dev/sdb2 /mnt/scratch; umount /mnt/scratch; mkfs.btrfs -f /dev/sdb2
...
unable to open /dev/sdb2: Device or resource busy
because mkfs.btrfs tries to open the device O_EXCL, and somebody still has it.
Using systemtap to track bdev gets & puts shows a kworker thread doing a
blkdev put after mkfs attempts a get; this is left over from the unmount
path:
btrfs_close_devices
__btrfs_close_devices
call_rcu(&device->rcu, free_device);
free_device
INIT_WORK(&device->rcu_work, __free_device);
schedule_work(&device->rcu_work);
so unmount might complete before __free_device fires & does its blkdev_put.
Adding an rcu_barrier() to btrfs_close_devices() causes unmount to wait
until all blkdev_put()s are done, and the device is truly free once
unmount completes.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Liu Bo [Mon, 11 Mar 2013 09:37:45 +0000 (09:37 +0000)]
Btrfs: remove btrfs_try_spin_lock
Remove a useless function declaration
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Liu Bo [Mon, 11 Mar 2013 09:20:58 +0000 (09:20 +0000)]
Btrfs: get better concurrency for snapshot-aware defrag work
Using spinning case instead of blocking will result in better concurrency
overall.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Guenter Roeck [Thu, 21 Feb 2013 18:27:54 +0000 (10:27 -0800)]
hwmon: (pmbus/ltc2978) Fix temperature reporting
On LTC2978, only READ_TEMPERATURE is supported. It reports
the internal junction temperature. This register is unpaged.
On LTC3880, READ_TEMPERATURE and READ_TEMPERATURE2 are supported.
READ_TEMPERATURE is paged and reports external temperatures.
READ_TEMPERATURE2 is unpaged and reports the internal junction
temperature.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org # 3.2+
Acked-by: Jean Delvare <khali@linux-fr.org>
David Henningsson [Thu, 14 Mar 2013 14:28:29 +0000 (15:28 +0100)]
ALSA: hda - Disable IDT eapd_switch if there are no internal speakers
If there are no internal speakers, we should not turn the eapd switch
off, because it might be necessary to keep high for Headphone.
BugLink: https://bugs.launchpad.net/bugs/1155016
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
David Woodhouse [Thu, 14 Mar 2013 13:30:20 +0000 (13:30 +0000)]
hwmon: (pmbus) Fix krealloc() misuse in pmbus_add_attribute()
If krealloc() returns NULL, it *doesn't* free the original. So any code
of the form 'foo = krealloc(foo, …);' is almost certainly a bug.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Axel Lin [Thu, 14 Mar 2013 08:27:18 +0000 (16:27 +0800)]
hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: stable@vger.kernel.org
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Marek Szyprowski [Tue, 26 Feb 2013 06:46:24 +0000 (07:46 +0100)]
ARM: DMA-mapping: add missing GFP_DMA flag for atomic buffer allocation
Atomic pool should always be allocated from DMA zone if such zone is
available in the system to avoid issues caused by limited dma mask of
any of the devices used for making an atomic allocation.
Reported-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Stable <stable@vger.kernel.org> [v3.6+]
Linus Torvalds [Wed, 13 Mar 2013 22:47:50 +0000 (15:47 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace
Pull namespace bugfixes from Eric Biederman:
"This tree includes a partial revert for "fs: Limit sys_mount to only
request filesystem modules." When I added the new style module aliases
to the filesystems I deleted the old ones. A bad move. It turns out
that distributions like Arch linux use module aliases when
constructing ramdisks. Which meant ultimately that an ext3 filesystem
mounted with ext4 would not result in the ext4 module being put into
the ramdisk.
The other change in this tree adds a handful of filesystem module
alias I simply failed to add the first time. Which inconvinienced a
few folks using cifs.
I don't want to inconvinience folks any longer than I have to so here
are these trivial fixes."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
fs: Readd the fs module aliases.
fs: Limit sys_mount to only request filesystem modules. (Part 3)
Linus Torvalds [Wed, 13 Mar 2013 22:21:57 +0000 (15:21 -0700)]
Merge branch 'akpm' (fixes from Andrew)
Merge misc fixes from Andrew Morton:
- A bunch of fixes
- Finish off the idr API conversions before someone starts to use the
old interfaces again.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
idr: idr_alloc() shouldn't trigger lowmem warning when preloaded
UAPI: fix endianness conditionals in M32R's asm/stat.h
UAPI: fix endianness conditionals in linux/raid/md_p.h
UAPI: fix endianness conditionals in linux/acct.h
UAPI: fix endianness conditionals in linux/aio_abi.h
decompressors: fix typo "POWERPC"
mm/fremap.c: fix oops on error path
idr: deprecate idr_pre_get() and idr_get_new[_above]()
tidspbridge: convert to idr_alloc()
zcache: convert to idr_alloc()
mlx4: remove leftover idr_pre_get() call
workqueue: convert to idr_alloc()
nfsd: convert to idr_alloc()
nfsd: remove unused get_new_stid()
kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORER
signal: always clear sa_restorer on execve
mm: remove_memory(): fix end_pfn setting
include/linux/res_counter.h needs errno.h
Tejun Heo [Wed, 13 Mar 2013 21:59:49 +0000 (14:59 -0700)]
idr: idr_alloc() shouldn't trigger lowmem warning when preloaded
GFP_NOIO is often used for idr_alloc() inside preloaded section as the
allocation mask doesn't really matter. If the idr tree needs to be
expanded, idr_alloc() first tries to allocate using the specified
allocation mask and if it fails falls back to the preloaded buffer. This
order prevent non-preloading idr_alloc() users from taking advantage of
preloading ones by using preload buffer without filling it shifting the
burden of allocation to the preload users.
Unfortunately, this allowed/expected-to-fail kmem_cache allocation ends up
generating spurious slab lowmem warning before succeeding the request from
the preload buffer.
This patch makes idr_layer_alloc() add __GFP_NOWARN to the first
kmem_cache attempt and try kmem_cache again w/o __GFP_NOWARN after
allocation from preload_buffer fails so that lowmem warning is generated
if not suppressed by the original @gfp_mask.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: David Teigland <teigland@redhat.com>
Tested-by: David Teigland <teigland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Wed, 13 Mar 2013 21:59:48 +0000 (14:59 -0700)]
UAPI: fix endianness conditionals in M32R's asm/stat.h
In the UAPI header files, __BIG_ENDIAN and __LITTLE_ENDIAN must be
compared against __BYTE_ORDER in preprocessor conditionals where these are
exposed to userspace (that is they're not inside __KERNEL__ conditionals).
However, in the main kernel the norm is to check for
"defined(__XXX_ENDIAN)" rather than comparing against __BYTE_ORDER and
this has incorrectly leaked into the userspace headers.
The definition of struct stat64 in M32R's asm/stat.h is wrong in this way.
Note that userspace will likely interpret the field order incorrectly as
the big-endian variant on little-endian machines - depending on header
inclusion order.
[!!!] NOTE [!!!] This patch may adversely change the userspace API. It might
be better to fix the ordering of st_blocks and __pad4 in struct stat64.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Wed, 13 Mar 2013 21:59:47 +0000 (14:59 -0700)]
UAPI: fix endianness conditionals in linux/raid/md_p.h
In the UAPI header files, __BIG_ENDIAN and __LITTLE_ENDIAN must be
compared against __BYTE_ORDER in preprocessor conditionals where these are
exposed to userspace (that is they're not inside __KERNEL__ conditionals).
However, in the main kernel the norm is to check for
"defined(__XXX_ENDIAN)" rather than comparing against __BYTE_ORDER and
this has incorrectly leaked into the userspace headers.
The definition of struct mdp_superblock_s in linux/raid/md_p.h is wrong in
this way. Note that userspace will likely interpret the ordering of the
fields incorrectly as the big-endian variant on a little-endian machines -
depending on header inclusion order.
[!!!] NOTE [!!!] This patch may adversely change the userspace API. It might
be better to fix the ordering of events_hi, events_lo, cp_events_hi and
cp_events_lo in struct mdp_superblock_s / typedef mdp_super_t.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Wed, 13 Mar 2013 21:59:46 +0000 (14:59 -0700)]
UAPI: fix endianness conditionals in linux/acct.h
In the UAPI header files, __BIG_ENDIAN and __LITTLE_ENDIAN must be
compared against __BYTE_ORDER in preprocessor conditionals where these are
exposed to userspace (that is they're not inside __KERNEL__ conditionals).
However, in the main kernel the norm is to check for
"defined(__XXX_ENDIAN)" rather than comparing against __BYTE_ORDER and
this has incorrectly leaked into the userspace headers.
The definition of ACCT_BYTEORDER in linux/acct.h is wrong in this way.
Note that userspace will likely interpret this incorrectly as the
big-endian variant on little-endian machines - depending on header
inclusion order.
[!!!] NOTE [!!!] This patch may adversely change the userspace API. It might
be better to fix the value of ACCT_BYTEORDER.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Wed, 13 Mar 2013 21:59:45 +0000 (14:59 -0700)]
UAPI: fix endianness conditionals in linux/aio_abi.h
In the UAPI header files, __BIG_ENDIAN and __LITTLE_ENDIAN must be
compared against __BYTE_ORDER in preprocessor conditionals where these are
exposed to userspace (that is they're not inside __KERNEL__ conditionals).
However, in the main kernel the norm is to check for
"defined(__XXX_ENDIAN)" rather than comparing against __BYTE_ORDER and
this has incorrectly leaked into the userspace headers.
The definition of PADDED() in linux/aio_abi.h is wrong in this way. Note
that userspace will likely interpret this and thus the order of fields in
struct iocb incorrectly as the little-endian variant on big-endian
machines - depending on header inclusion order.
[!!!] NOTE [!!!] This patch may adversely change the userspace API. It might
be better to fix the ordering of aio_key and aio_reserved1 in struct iocb.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Bolle [Wed, 13 Mar 2013 21:59:44 +0000 (14:59 -0700)]
decompressors: fix typo "POWERPC"
Commit
5dc49c75a26b ("decompressors: make the default XZ_DEC_* config
match the selected architecture") added
default y if POWERPC
to lib/xz/Kconfig. But there is no Kconfig symbol POWERPC. The most
general Kconfig symbol for the powerpc architecture is PPC. So let's
use that.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Lasse Collin <lasse.collin@tukaani.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Wed, 13 Mar 2013 21:59:43 +0000 (14:59 -0700)]
mm/fremap.c: fix oops on error path
If find_vma() fails, sys_remap_file_pages() will dereference `vma', which
contains NULL. Fix it by checking the pointer.
(We could alternatively check for err==0, but this seems more direct)
(The vm_flags change is to squish a bogus used-uninitialised warning
without adding extra code).
Reported-by: Tommi Rantala <tt.rantala@gmail.com>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Wed, 13 Mar 2013 21:59:42 +0000 (14:59 -0700)]
idr: deprecate idr_pre_get() and idr_get_new[_above]()
Now that all in-kernel users are converted to ues the new alloc
interface, mark the old interface deprecated. We should be able to
remove these in a few releases.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Wed, 13 Mar 2013 21:59:41 +0000 (14:59 -0700)]
tidspbridge: convert to idr_alloc()
idr_get_new*() and friends are about to be deprecated. Convert to the
new idr_alloc() interface.
There are some peculiarities and possible bugs in the converted
functions. This patch preserves those.
* drv_insert_node_res_element() returns -ENOMEM on alloc failure,
-EFAULT if id space is exhausted. -EFAULT is at best misleading.
* drv_proc_insert_strm_res_element() is even weirder. It returns
-EFAULT if kzalloc() fails, -ENOMEM if idr preloading fails and
-EPERM if id space is exhausted. What's going on here?
* drv_proc_insert_strm_res_element() doesn't free *pstrm_res after
failure.
Only compile tested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Cc: Rene Sapiens <rene.sapiens@ti.com>
Cc: Armando Uribe <x0095078@ti.com>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Wed, 13 Mar 2013 21:59:40 +0000 (14:59 -0700)]
zcache: convert to idr_alloc()
idr_get_new*() and friends are about to be deprecated. Convert to the
new idr_alloc() interface.
Only compile tested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Wed, 13 Mar 2013 21:59:39 +0000 (14:59 -0700)]
mlx4: remove leftover idr_pre_get() call
Commit
6a9200603d76 ("IB/mlx4: convert to idr_alloc()") forgot to remove
idr_pre_get() call in mlx4_ib_cm_paravirt_init(). It's unnecessary and
idr_pre_get() will soon be deprecated. Remove it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jack Morgenstein <jackm@dev.mellanox.co.il>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Wed, 13 Mar 2013 21:59:38 +0000 (14:59 -0700)]
workqueue: convert to idr_alloc()
idr_get_new*() and friends are about to be deprecated. Convert to the
new idr_alloc() interface.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Wed, 13 Mar 2013 21:59:37 +0000 (14:59 -0700)]
nfsd: convert to idr_alloc()
idr_get_new*() and friends are about to be deprecated. Convert to the
new idr_alloc() interface.
Only compile-tested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Wed, 13 Mar 2013 21:59:36 +0000 (14:59 -0700)]
nfsd: remove unused get_new_stid()
get_new_stid() is no longer used since commit
3abdb607125 ("nfsd4:
simplify idr allocation"). Remove it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Wed, 13 Mar 2013 21:59:34 +0000 (14:59 -0700)]
kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORER
__ARCH_HAS_SA_RESTORER is the preferred conditional for use in 3.9 and
later kernels, per Kees.
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Julien Tinnes <jln@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Wed, 13 Mar 2013 21:59:33 +0000 (14:59 -0700)]
signal: always clear sa_restorer on execve
When the new signal handlers are set up, the location of sa_restorer is
not cleared, leaking a parent process's address space location to
children. This allows for a potential bypass of the parent's ASLR by
examining the sa_restorer value returned when calling sigaction().
Based on what should be considered "secret" about addresses, it only
matters across the exec not the fork (since the VMAs haven't changed
until the exec). But since exec sets SIG_DFL and keeps sa_restorer,
this is where it should be fixed.
Given the few uses of sa_restorer, a "set" function was not written
since this would be the only use. Instead, we use
__ARCH_HAS_SA_RESTORER, as already done in other places.
Example of the leak before applying this patch:
$ cat /proc/$$/maps
...
7fb9f3083000-
7fb9f3238000 r-xp
00000000 fd:01 404469 .../libc-2.15.so
...
$ ./leak
...
7f278bc74000-
7f278be29000 r-xp
00000000 fd:01 404469 .../libc-2.15.so
...
1 0 (nil) 0x7fb9f30b94a0
2
4000000 (nil) 0x7f278bcaa4a0
3
4000000 (nil) 0x7f278bcaa4a0
4 0 (nil) 0x7fb9f30b94a0
...
[akpm@linux-foundation.org: use SA_RESTORER for backportability]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Emese Revfy <re.emese@gmail.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Julien Tinnes <jln@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Toshi Kani [Wed, 13 Mar 2013 21:59:31 +0000 (14:59 -0700)]
mm: remove_memory(): fix end_pfn setting
remove_memory() calls walk_memory_range() with [start_pfn, end_pfn), where
end_pfn is exclusive in this range. Therefore, end_pfn needs to be set to
the next page of the end address.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Wu Jianguo <wujianguo@huawei.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Wed, 13 Mar 2013 21:59:30 +0000 (14:59 -0700)]
include/linux/res_counter.h needs errno.h
alpha allmodconfig:
In file included from mm/memcontrol.c:28:
include/linux/res_counter.h: In function 'res_counter_set_limit':
include/linux/res_counter.h:203: error: 'EBUSY' undeclared (first use in this function)
include/linux/res_counter.h:203: error: (Each undeclared identifier is reported only once
include/linux/res_counter.h:203: error: for each function it appears in.)
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 13 Mar 2013 22:03:48 +0000 (15:03 -0700)]
Merge tag 'usb-3.9-rc2' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman:
"Here are a number of tiny USB fixes and new USB device ids for your
3.9 tree.
The "largest" one here is a revert of a usb-storage patch that turned
out to be incorrect, breaking existing users, which is never a good
thing. Everything else is pretty simple and small"
* tag 'usb-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (43 commits)
USB: quatech2: only write to the tty if the port is open.
qcserial: bind to DM/DIAG port on Gobi 1K devices
USB: cdc-wdm: fix buffer overflow
usb: serial: Add Rigblaster Advantage to device table
qcaux: add Franklin U600
usb: musb: core: fix possible build error with randconfig
usb: cp210x new Vendor/Device IDs
usb: gadget: pxa25x: fix disconnect reporting
usb: dwc3: ep0: fix sparc64 build
usb: c67x00 RetryCnt value in c67x00 TD should be 3
usb: Correction to c67x00 TD data length mask
usb: Makefile: fix drivers/usb/phy/ Makefile entry
USB: added support for Cinterion's products AH6 and PLS8
usb: gadget: fix omap_udc build errors
USB: storage: fix Huawei mode switching regression
USB: storage: in-kernel modeswitching is deprecated
tools: usb: ffs-test: Fix build failure
USB: option: add Huawei E5331
usb: musb: omap2430: fix sparse warning
usb: musb: omap2430: fix omap_musb_mailbox glue check again
...
Linus Torvalds [Wed, 13 Mar 2013 22:02:02 +0000 (15:02 -0700)]
Merge tag 'tty-3.9-rc2' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg Kroah-Hartman:
"Here are some tty/serial driver fixes for 3.9
We finally mute the annoying WARN_ON that lots of people are hitting
and it turns out isn't needed anymore. Also add a few new device ids
and a some other minor fixes."
* tag 'tty-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: fix typo "SERIAL_S3C2412"
serial: 8250: Keep 8250.<xxxx> module options functional after driver rename
tty: serial: fix typo "ARCH_S5P6450"
tty/8250_pnp: serial port detection regression since v3.7
serial: bcm63xx_uart: fix compilation after "TTY: switch tty_insert_flip_char"
serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller
Fix 4 port and add support for 8 port 'Unknown' PCI serial port cards
tty/serial: Add support for Altera serial port
tty: serial: vt8500: Unneccessary duplicated clock code removed
tty: serial: mpc5xxx: fix PSC clock name bug
TTY: disable debugging warning
Linus Torvalds [Wed, 13 Mar 2013 22:01:08 +0000 (15:01 -0700)]
Merge tag 'staging-3.9-rc2' of git://git./linux/kernel/git/gregkh/staging
Pull staging tree fixes from Greg Kroah-Hartman:
"Here are some drivers/staging and drivers/iio fixes for 3.9 (the two
are still pretty intertwined, hence them coming both from my tree
still.) Nothing major, just a few things that have been reported by
users, all of these have been in linux-next for a while."
* tag 'staging-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: comedi: dt9812: use CR_CHAN() for channel number
staging/vt6656: Fix too large integer constant warning on 32-bit
staging: comedi: drivers: usbduxsigma.c: fix DMA buffers on stack
staging: imx/drm: request irq only after adding the crtc
staging: comedi: drivers: usbduxfast.c: fix for DMA buffers on stack
staging: comedi: drivers: usbdux.c: fix DMA buffers on stack
staging: vt6656: Fix oops on resume from suspend.
iio:common:st_sensors fixed all warning messages about uninitialized variables
iio: Fix build error seen if IIO_TRIGGER is defined but IIO_BUFFER is not
iio/imu: inv_mpu6050 depends on IIO_BUFFER
iio:ad5064: Initialize register cache correctly
iio:ad5064: Fix off by one in DAC value range check
iio:ad5064: Fix address of the second channel for ad5065/ad5045/ad5025
Eric W. Biederman [Wed, 13 Mar 2013 18:51:49 +0000 (11:51 -0700)]
userns: Don't allow CLONE_NEWUSER | CLONE_FS
Don't allowing sharing the root directory with processes in a
different user namespace. There doesn't seem to be any point, and to
allow it would require the overhead of putting a user namespace
reference in fs_struct (for permission checks) and incrementing that
reference count on practically every call to fork.
So just perform the inexpensive test of forbidding sharing fs_struct
acrosss processes in different user namespaces. We already disallow
other forms of threading when unsharing a user namespace so this
should be no real burden in practice.
This updates setns, clone, and unshare to disallow multiple user
namespaces sharing an fs_struct.
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>