OSDN Git Service
Junio C Hamano [Wed, 18 Feb 2009 18:48:01 +0000 (10:48 -0800)]
git-svn: fix parsing of timestamp obtained from svn
Ward Wouts reports that git-svn barfed like this:
Unable to parse date: 2004-03-09T09:44:33.Z at /usr/bin/git-svn line 3995
The parse_svn_date sub expects there always are one or more digits after
the decimal point to record fractional seconds, but this example does not
and results in a failure like this.
The fix is based on the original fix by the reporter, further cleaned up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Marcel M. Cary [Wed, 18 Feb 2009 13:09:41 +0000 (14:09 +0100)]
gitweb: Fix warnings with override permitted but no repo override
When a feature like "blame" is permitted to be overridden in the
repository configuration but it is not actually set in the repository,
a warning is emitted due to the undefined value of the repository
configuration, even though it's a perfectly normal condition.
Emitting warning is grounds for test failure in the gitweb test
script.
This error was caused by rewrite of git_get_project_config from using
"git config [<type>] <name>" for each individual configuration
variable checked to parsing "git config --list --null" output in
commit
b201927 (gitweb: Read repo config using 'git config -z -l').
Earlier version of git_get_project_config was returning empty string
if variable do not exist in config; newer version is meant to return
undef in this case, therefore change in feature_bool was needed.
Additionally config_to_* subroutines were meant to be invoked only if
configuration variable exists; therefore we added early return to
git_get_project_config: it now returns no value if variable does not
exists in config. Otherwise config_to_* subroutines (config_to_bool
in paryicular) wouldn't be able to distinguish between the case where
variable does not exist and the case where variable doesn't have value
(the "[section] noval" case, which evaluates to true for boolean).
While at it fix bug in config_to_bool, where checking if $val is
defined (if config variable has value) was done _after_ stripping
leading and trailing whitespace, which lead to 'Use of uninitialized
value' warning.
Add test case for features overridable but not overriden in repo
config, and case for no value boolean configuration variable.
Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Mon, 16 Feb 2009 16:34:57 +0000 (17:34 +0100)]
bash completion: only show 'log --merge' if merging
The gitk completion only shows --merge if MERGE_HEAD is present.
Do it the same way for git-log completion.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Mon, 16 Feb 2009 16:34:56 +0000 (17:34 +0100)]
bash completion: refactor common log, shortlog and gitk options
Refactor options that are useful for more than one of them into a
variable used by the relevant completions. This has the effect of
adding the following options to git-log:
--branches --tags --remotes --first-parent --dense --sparse
--simplify-merges --simplify-by-decoration --first-parent
--no-merges
The following to git-shortlog:
--branches --tags --remotes --first-parent
And the following to gitk:
--branches --tags --remotes --first-parent --no-merges --max-count=
--max-age= --since= --after= --min-age= --until= --before= --dense
--sparse --full-history --simplify-merges --simplify-by-decoration
--left-right
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giuseppe Bilotta [Sun, 15 Feb 2009 09:18:36 +0000 (10:18 +0100)]
gitweb: fix wrong base URL when non-root DirectoryIndex
CGI::url() has some issues when rebuilding the script URL if the script
is a DirectoryIndex.
One of these issue is the inability to strip PATH_INFO, which is why
we had to do it ourselves.
Another issue is that the resulting URL cannot be used for the <base>
tag: it works if we're the DirectoryIndex at the root level, but not
otherwise.
We fix this by building the proper base URL ourselves, and improve the
comment about the need to strip PATH_INFO manually while we're at it.
Additionally t/t9500-gitweb-standalone-no-errors.sh had to be modified
to set SCRIPT_NAME variable (CGI standard states that it MUST be set,
and now gitweb uses it if PATH_INFO is not empty, as is the case for
some of tests in t9500).
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sat, 14 Feb 2009 16:21:53 +0000 (17:21 +0100)]
bash: update 'git svn' options
'git svn' got some new subcommands and otions in the last couple of
months. This patch adds completion support for them.
In particular:
* 'fetch', 'clone', etc.: '--ignore-paths='
* 'init' and 'clone': '--prefix=', '--use-log-author',
'--add-author-from'
* 'dcommit': '--commit-url', '--revision'
* 'log': '--color'
* 'rebase': '--dry-run'
* 'branch', 'tag', 'blame', 'migrate' subcommands and their options
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sun, 15 Feb 2009 13:25:11 +0000 (14:25 +0100)]
bash: add missing 'git merge' options
Namely: '--commit', '--stat', '--no-squash', '--ff', '--no-ff'.
One might wonder why add options that specify the default behaviour
anyway (e.g. '--commit', '--no-squash', etc.). Users can override the
default with config options (e.g. 'branch.<name>.mergeoptions',
'merge.log'), but sometimes might still need the default behaviour.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dévai Tamás [Wed, 11 Feb 2009 23:14:02 +0000 (00:14 +0100)]
git-svn: Fix for rewriteRoot URL containing username.
If the new svn root URL given with the svn-remote.<repo>.rewriteRoot config option
(or by the --rewrite-root option to 'git svn init') contains a username
(such as 'svn+ssh://username@example.com/repo'), find_by_url() cannot find
the repository URL, because the URL contained in the commit message does have
the username removed.
Signed-off-by: Dévai Tamás <devait@mailbox.sk>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 15 Feb 2009 18:18:58 +0000 (19:18 +0100)]
builtin-receive-pack.c: fix compiler warnings about format string
While all of the strings passed to warning() are, in fact, literals, the
compiler doesn't recognize them as such because it doesn't see through
the loop used to iterate over them:
builtin-receive-pack.c: In function 'warn_unconfigured_deny':
builtin-receive-pack.c:247: warning: format not a string literal and no format arguments
builtin-receive-pack.c: In function 'warn_unconfigured_deny_delete_current':
builtin-receive-pack.c:273: warning: format not a string literal and no format arguments
Calm the compiler by adding easily recognizable format string literals.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 15 Feb 2009 08:15:52 +0000 (00:15 -0800)]
RelNotes Update
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 15 Feb 2009 09:44:58 +0000 (01:44 -0800)]
Merge branch 'mc/setup-cd-p'
* mc/setup-cd-p:
git-sh-setup: Use "cd" option, not /bin/pwd, for symlinked work tree
Junio C Hamano [Sun, 15 Feb 2009 09:44:20 +0000 (01:44 -0800)]
Merge branch 'ff/submodule-no-fetch'
* ff/submodule-no-fetch:
submodule: add --no-fetch parameter to update command
Junio C Hamano [Sun, 15 Feb 2009 09:44:15 +0000 (01:44 -0800)]
Merge branch 'ms/mailmap'
* ms/mailmap:
Move mailmap documentation into separate file
Change current mailmap usage to do matching on both name and email of author/committer.
Add map_user() and clear_mailmap() to mailmap
Add find_insert_index, insert_at_index and clear_func functions to string_list
Add mailmap.file as configurational option for mailmap location
Junio C Hamano [Sun, 15 Feb 2009 09:44:11 +0000 (01:44 -0800)]
Merge branch 'jn/gitweb-committag'
* jn/gitweb-committag:
gitweb: Better regexp for SHA-1 committag match
Junio C Hamano [Sun, 15 Feb 2009 09:43:57 +0000 (01:43 -0800)]
Merge branch 'rc/http-push'
* rc/http-push:
use a hash of the lock token as the suffix for PUT/MOVE
Tay Ray Chuan [Sat, 14 Feb 2009 09:52:14 +0000 (17:52 +0800)]
use a hash of the lock token as the suffix for PUT/MOVE
After
753bc91 ("Remove the requirement opaquelocktoken uri scheme"),
lock tokens are in the URI forms in which they are received from the
server, eg. 'opaquelocktoken:', 'urn:uuid:'.
However, "start_put" (and consequently "start_move"), which attempts to
create a unique temporary file using the UUID of the lock token,
inadvertently uses the lock token in its URI form. These file
operations on the server may not be successful (specifically, in
Windows), due to the colon ':' character from the URI form of the lock
token in the file path.
This patch uses a hash of the lock token instead, guaranteeing only
"safe" characters (a-f, 0-9) are used in the file path.
The token's hash is generated when the lock token is received from the
server in handle_new_lock_ctx, minimizing the number of times of
hashing.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 15 Feb 2009 08:05:11 +0000 (00:05 -0800)]
Merge branch 'js/gc-prune'
* js/gc-prune:
gc: make --prune useful again by accepting an optional parameter
Junio C Hamano [Sun, 15 Feb 2009 08:03:43 +0000 (00:03 -0800)]
Merge branch 'tr/abbrev-commit-no-ellipses'
* tr/abbrev-commit-no-ellipses:
log: do not print ellipses with --abbrev-commit
Junio C Hamano [Sun, 15 Feb 2009 08:03:29 +0000 (00:03 -0800)]
Merge branch 'jc/branch-previous'
* jc/branch-previous:
Teach @{-1} to git merge
Teach the "@{-1} syntax to "git branch"
SZEDER Gábor [Sat, 14 Feb 2009 16:21:52 +0000 (17:21 +0100)]
bash: fix misspelled 'git svn' option
'--user-log-author' -> '--use-log-author'
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sat, 14 Feb 2009 16:16:29 +0000 (17:16 +0100)]
t1500: more 'git rev-parse --git-dir' tests
Extend t1500 with tests of 'git rev-parse --git-dir' when invoked from
other directories of the repository or the work tree.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sat, 14 Feb 2009 16:16:28 +0000 (17:16 +0100)]
Move 'rev-parse --git-dir' test to t1500
Commit
72183cb2 (Fix gitdir detection when in subdir of
gitdir, 2009-01-16) added a test to 't1501-worktree' to check the
behaviour of 'git rev-parse --git-dir' in a special case. However,
t1501 is about testing separate work tree setups, and not about basic
'rev-parse' functionality, which is tested in t1500-rev-parse.
Therefore, this patch moves that test to t1500.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Sat, 14 Feb 2009 20:56:51 +0000 (21:56 +0100)]
Documentation: pruning recipe for destructive filter-branch
Add a section about how to shrink a repository's size after running
git-filter-branch to remove large blobs from history.
This comes up every week or so on IRC, and the commands required to
handle every case are not very newbie-friendly, so hopefully writing
them down somewhere leads to fewer questions.
It may seem contradictory to document fallbacks for older Gits in
newer docs, but we want to point people at this as a FAQ answer, and
they will frequently not have the newest version installed.
Thanks to Björn Steinbrink and Junio C Hamano for comments and
corrections.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Sat, 14 Feb 2009 22:10:10 +0000 (23:10 +0100)]
gc: make --prune useful again by accepting an optional parameter
With this patch, "git gc --no-prune" will not prune any loose (and
dangling) object, and "git gc --prune=5.minutes.ago" will prune
all loose objects older than 5 minutes.
This patch benefitted from suggestions by Thomas Rast and Jan Krï¿œger.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 14 Feb 2009 07:26:12 +0000 (23:26 -0800)]
Teach @{-1} to git merge
1.6.2 will have @{-1} syntax advertised as "usable anywhere you can use
a branch name". However, "git merge @{-1}" did not work.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 14 Feb 2009 07:08:05 +0000 (23:08 -0800)]
Teach the "@{-1} syntax to "git branch"
This teaches the new "@{-1} syntax to refer to the previous branch to "git
branch". After looking at somebody's faulty patch series on a topic
branch too long, if you decide it is not worth merging, you can just say:
$ git checkout master
$ git branch -D @{-1}
to get rid of it without having to type the name of the topic you now hate
so much for wasting a lot of your time.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 13 Feb 2009 18:26:09 +0000 (13:26 -0500)]
symbolic-ref: allow refs/<whatever> in HEAD
Commit
afe5d3d5 introduced a safety valve to symbolic-ref to
disallow installing an invalid HEAD. It was accompanied by
b229d18a, which changed validate_headref to require that
HEAD contain a pointer to refs/heads/ instead of just refs/.
Therefore, the safety valve also checked for refs/heads/.
As it turns out, topgit is using refs/top-bases/ in HEAD,
leading us to re-loosen (at least temporarily) the
validate_headref check made in
b229d18a. This patch does the
corresponding loosening for the symbolic-ref safety valve,
so that the two are in agreement once more.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keith Cascio [Fri, 13 Feb 2009 17:33:34 +0000 (09:33 -0800)]
Remove redundant bit clears from diff_setup()
All bits already clear after memset(0).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Fri, 13 Feb 2009 22:10:41 +0000 (23:10 +0100)]
log: do not print ellipses with --abbrev-commit
'git log --abbrev-commit' added an ellipsis to all commit names that
were abbreviated. This was particularly annoying if you wanted to
cut&paste the sha1 from the terminal, since selecting by word would
pick up '...' too.
So use find_unique_abbrev() instead of diff_unique_abbrev() in all
log-related commit sha1 printing routines, and also change the
formatting of the 'Merge: parent1 parent2' line output via
pretty_print_commit().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matt Kraai [Thu, 12 Feb 2009 15:55:54 +0000 (07:55 -0800)]
bash-completion: Complete the values of color.interactive, color.ui, color.pager
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 12 Feb 2009 06:42:27 +0000 (22:42 -0800)]
Install the default "master" branch configuration after cloning a void
After "cloning from an empty repository", we have a configuration to
describe the remote's URL and the default ref mappings, but we lack the
branch configuration for the default branch we create on our end,
"master".
It is likely that the empty repository we cloned from will point the
default "master" branch with its HEAD, so prepare the local configuration
to match.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeremy White [Thu, 12 Feb 2009 21:17:04 +0000 (15:17 -0600)]
Update documentation to add further information about using Thunderbird with git-imap-send.
Signed-off-by: Jeremy White <jwhite@codeweavers.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark Burton [Thu, 12 Feb 2009 10:21:19 +0000 (10:21 +0000)]
git-rebase.txt: --interactive does not work with --whitespace
Signed-off-by: Mark Burton <markb@ordern.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jacob Helwig [Thu, 12 Feb 2009 18:01:10 +0000 (10:01 -0800)]
Add 'rm -f' equivalent to 'git rm' example of filter-branch --index-filter
Signed-off-by: Jacob Helwig <jacob.helwig@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 12 Feb 2009 21:02:09 +0000 (13:02 -0800)]
Revert "validate_headref: tighten ref-matching to just branches"
This reverts commit
b229d18a809c169314b7f0d048dc5a7632e8f916, at least
until we figure out how to work better with TopGit that points HEAD to
refs/top-bases/ hierarchy.
Nazri Ramliy [Thu, 12 Feb 2009 13:36:14 +0000 (21:36 +0800)]
Bugfix: GIT_EXTERNAL_DIFF with more than one changed files
When there is more than one file that are changed, running git diff with
GIT_EXTERNAL_DIFF incorrectly diagnoses an programming error and dies.
The check introduced in
479b0ae (diff: refactor tempfile cleanup handling,
2009-01-22) to detect a temporary file slot that forgot to remove its
temporary file was inconsistent with the way the codepath to remove the
temporary to mark the slot that it is done with it.
This patch fixes this problem and adds a test case for it.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 12 Feb 2009 02:47:30 +0000 (18:47 -0800)]
Merge branch 'maint'
* maint:
Prepare for 1.6.1.4.
Make repack less likely to corrupt repository
fast-export: ensure we traverse commits in topological order
Clear the delta base cache if a pack is rebuilt
Conflicts:
RelNotes
Junio C Hamano [Thu, 12 Feb 2009 02:44:03 +0000 (18:44 -0800)]
Prepare for 1.6.1.4.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 12 Feb 2009 02:32:37 +0000 (18:32 -0800)]
Merge branch 'maint-1.6.0' into maint
* maint-1.6.0:
Make repack less likely to corrupt repository
fast-export: ensure we traverse commits in topological order
Clear the delta base cache if a pack is rebuilt
Junio C Hamano [Tue, 10 Feb 2009 20:16:31 +0000 (12:16 -0800)]
Make repack less likely to corrupt repository
Some platforms refuse to rename a file that is open. When repacking an
already packed repository without adding any new object, the resulting
pack will contain the same set of objects as an existing pack, and on such
platforms, a newly created packfile cannot replace the existing one.
The logic detected this issue but did not try hard enough to recover from
it. Especially because the files that needs renaming come in pairs, there
potentially are different failure modes that one can be renamed but the
others cannot. Asking manual recovery to end users were error prone.
This patch tries to make it more robust by first making sure all the
existing files that need to be renamed have been renamed before
continuing, and attempts to roll back if some failed to rename.
This is based on an initial patch by Robin Rosenberg.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 11 Feb 2009 06:03:53 +0000 (23:03 -0700)]
fast-export: ensure we traverse commits in topological order
fast-export will only list as parents those commits which have already
been traversed (making it appear as if merges have been squashed if not
all parents have been traversed). To avoid this silent squashing of
merge commits, we request commits in topological order.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Kidd [Wed, 11 Feb 2009 21:10:41 +0000 (16:10 -0500)]
filter-branch: Add more error-handling
9273b56 (filter-branch: Fix fatal error on bare repositories, 2009-02-03)
fixed a missing check of return status from an underlying command in
git-filter-branch, but there still are places that do not check errors.
For example, the command does not pay attention to the exit status of the
command given by --commit-filter. It should abort in such a case.
This attempts to fix all the remaining places that fails to checks errors.
In two places, I've had to break apart pipelines in order to check the
error code for the first stage of the pipeline, as discussed here:
http://kerneltrap.org/mailarchive/git/2009/1/28/
4835614
Feedback on this patch was provided by Johannes Sixt, Johannes Schindelin
and Junio C Hamano. Thomas Rast helped with pipeline error handling.
Signed-off-by: Eric Kidd <git@randomhacks.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pat Notz [Tue, 10 Feb 2009 16:43:30 +0000 (09:43 -0700)]
Fix contrib/hooks/post-receive-email for new duplicate branch
In the show_new_revisions function, the original code:
git rev-parse --not --branches | grep -v $(git rev-parse $refname) |
isn't quite right since one can create a new branch and push it
without any new commits. In that case, two refs will have the same
sha1 but both would get filtered by the 'grep'. In the end, we'll
show ALL the history which is not what we want. Instead, we should
list the branches by name and remove the branch being updated and THEN
pass that list through rev-parse.
Revised as suggested by Jakub Narebski and Junio C Hamano to use
git-for-each-ref instead of git-branch. (Thanks!)
Signed-off-by: Pat Notz <pknotz@sandia.gov>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Wed, 11 Feb 2009 18:15:30 +0000 (10:15 -0800)]
Clear the delta base cache if a pack is rebuilt
There is some risk that re-opening a regenerated pack file with
different offsets could leave stale entries within the delta base
cache that could be matched up against other objects using the same
"struct packed_git*" and pack offset.
Throwing away the entire delta base cache in this case is safer,
as we don't have to worry about a recycled "struct packed_git*"
matching to the wrong base object, resulting in delta apply
errors while unpacking an object.
Suggested-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 11 Feb 2009 18:20:12 +0000 (10:20 -0800)]
Merge git://git.bogomips.org/git-svn
* git://git.bogomips.org/git-svn:
test case for regression caused by git-svn empty symlink fix
git-svn: fix broken symlink workaround when switching branches
git-svn: Print revision while searching for earliest use of path
git-svn: abstract out a block into new method other_gs()
git-svn: allow disabling expensive broken symlink checks
Junio C Hamano [Wed, 11 Feb 2009 17:22:16 +0000 (09:22 -0800)]
Squelch overzealous "ignoring dangling symref" in an empty repository
057e713 (Warn use of "origin" when remotes/origin/HEAD is dangling,
2009-02-08) tried to warn dangling refs/remotes/origin/HEAD only when
"origin" was used to refer to it. There was one corner case a symref is
expected to be dangling and this warning is unwarranted: HEAD in an empty
repository.
This squelches the warning for this special case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anton Gyllenberg [Tue, 10 Feb 2009 22:38:45 +0000 (00:38 +0200)]
test case for regression caused by git-svn empty symlink fix
Commit
dbc6c74d0858d77e61e092a48d467e725211f8e9 "git-svn: handle empty
files marked as symlinks in SVN" caused a regression in an unusual case
where a branch has been created in SVN, later deleted and then created
again from another branch point and the original branch point had empty
files not in the new branch. In some cases git svn fetch will then fail
while trying to fetch the empty file from the wrong SVN revision.
This adds a test case that reproduces the issue.
[ew: added additional test to ensure file was created correctly
made test file executable ]
Signed-off-by: Anton Gyllenberg <anton@iki.fi>
Acked-by: Eric Wong <normalperson@yhbt.net>
Eric Wong [Wed, 11 Feb 2009 09:56:58 +0000 (01:56 -0800)]
git-svn: fix broken symlink workaround when switching branches
Thanks to Anton Gyllenberg <anton@iki.fi> for the bug report
(and testcase in the following commit):
> Commit
dbc6c74d0858d77e61e092a48d467e725211f8e9 "git-svn:
> handle empty files marked as symlinks in SVN" caused a
> regression in an unusual case where a branch has been created
> in SVN, later deleted and then created again from another
> branch point and the original branch point had empty files not
> in the new branch. In some cases git svn fetch will then fail
> while trying to fetch the empty file from the wrong SVN
> revision.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Deskin Miller [Mon, 9 Feb 2009 00:33:18 +0000 (19:33 -0500)]
git-svn: Print revision while searching for earliest use of path
When initializing a git-svn repository from a Subversion repoository,
it is common to be interested in a path which did not exist in the
initial commit to Subversion. In a large repository, the initial fetch
may take some looking for the earliest existence of the path time while
the user receives no additional feedback. Print the highest revision
number scanned thus far to let the user know something is still
happening.
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Sam Vilain [Tue, 26 Jun 2007 07:23:59 +0000 (19:23 +1200)]
git-svn: abstract out a block into new method other_gs()
We will be adding a more places that need to find git revisions
corresponding to new parents, so abstract out this section into a new
method.
Signed-off-by: Yuval Kogman <nothingmuch@woobling.org>
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
[ew: minor formatting changes]
Eric Wong [Sun, 1 Feb 2009 01:31:12 +0000 (17:31 -0800)]
git-svn: allow disabling expensive broken symlink checks
Since
dbc6c74d0858d77e61e092a48d467e725211f8e9, git-svn has had
an expensive check for broken symlinks that exist in some
repositories. This leads to a heavy performance hit on
repositories with many empty blobs that are not supposed to be
symlinks.
The workaround is enabled by default; and may be disabled via:
git config svn.brokenSymlinkWorkaround false
Reported by Markus Heidelberg.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Junio C Hamano [Wed, 11 Feb 2009 10:00:22 +0000 (02:00 -0800)]
Merge branch 'maint'
* maint:
revision traversal and pack: notice and die on missing commit
Junio C Hamano [Wed, 11 Feb 2009 10:00:07 +0000 (02:00 -0800)]
Merge branch 'maint-1.5.6' into maint
* maint-1.5.6:
revision traversal and pack: notice and die on missing commit
Junio C Hamano [Wed, 11 Feb 2009 09:41:22 +0000 (01:41 -0800)]
Merge branch 'maint-1.5.5' into maint-1.5.6
* maint-1.5.5:
revision traversal and pack: notice and die on missing commit
Conflicts:
revision.c
Junio C Hamano [Wed, 11 Feb 2009 09:40:12 +0000 (01:40 -0800)]
Merge branch 'maint-1.5.4' into maint-1.5.5
* maint-1.5.4:
revision traversal and pack: notice and die on missing commit
Junio C Hamano [Wed, 11 Feb 2009 09:27:43 +0000 (01:27 -0800)]
revision traversal and pack: notice and die on missing commit
cc0e6c5 (Handle return code of parse_commit in revision machinery,
2007-05-04) attempted to tighten error checking in the revision machinery,
but it wasn't enough. When get_revision_1() was asked for the next commit
to return, it tries to read and simplify the parents of the commit to be
returned, but an error while doing so was silently ignored and reported as
a truncated history to the caller instead.
This resulted in an early end of "git log" output or a pack that lacks
older commits from "git pack-objects", without any error indication in the
exit status from these commands, even though the underlying parse_commit()
issues an error message to the end user.
Note that the codepath in add_parents_list() that paints parents of an
UNINTERESTING commit UNINTERESTING silently ignores the error when
parse_commit() fails; this is deliberate and in line with
aeeae1b
(revision traversal: allow UNINTERESTING objects to be missing,
2009-01-27).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 9 Feb 2009 06:19:43 +0000 (22:19 -0800)]
builtin-receive-pack.c: do not initialize statics to 0
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 9 Feb 2009 06:31:21 +0000 (22:31 -0800)]
receive-pack: receive.denyDeleteCurrent
This is a companion patch to the recent
3d95d92 (receive-pack: explain
what to do when push updates the current branch, 2009-01-31).
Deleting the current branch from a remote will result in the next clone
from it not check out anything, among other things. It also is one of the
cause that makes remotes/origin/HEAD a dangling symbolic ref. This patch
still allows the traditional behaviour but with a big warning, and promises
that the default will change to 'refuse' in a future release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 11 Feb 2009 01:42:04 +0000 (17:42 -0800)]
Drop double-semicolon in C
The worst offenders are "continue;;" and "break;;" in switch statements.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 9 Feb 2009 07:52:01 +0000 (23:52 -0800)]
Warn use of "origin" when remotes/origin/HEAD is dangling
The previous one squelched the diagnositic message we used to issue every
time we enumerated the refs and noticed a dangling ref. This adds the
warning back to the place where the user actually attempts to use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 9 Feb 2009 07:27:10 +0000 (23:27 -0800)]
remote prune: warn dangling symrefs
If you prune from the remote "frotz" that deleted the ref your tracking
branch remotes/frotz/HEAD points at, the symbolic ref will become
dangling. We used to detect this as an error condition and issued a
message every time refs are enumerated.
This stops the error message, but moves the warning to "remote prune".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber [Tue, 10 Feb 2009 15:14:13 +0000 (16:14 +0100)]
Fix the installation path for html documentation
026fa0d (Move computation of absolute paths from Makefile to runtime in
preparation for RUNTIME_PREFIX, 2009-01-18) broke the installation of html
documentation. A relative htmldir is given to Documentation/Makefile and
html documentations are installed in a subdirectory of "Documentation" in
the source tree.
Fix this by not exporting htmldir from Makefile; this allows
Documentation/Makefile to compute the htmldir from the prefix.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephan Beyer [Tue, 10 Feb 2009 14:30:35 +0000 (15:30 +0100)]
Generalize and libify index_is_dirty() to index_differs_from(...)
index_is_dirty() in builtin-revert.c checks if the index is dirty.
This patch generalizes this function to check if the index differs
from a revision, i.e. the former index_is_dirty() behavior can now be
achieved by index_differs_from("HEAD", 0).
The second argument "diff_flags" allows to set further diff option
flags like DIFF_OPT_IGNORE_SUBMODULES. See DIFF_OPT_* macros in diff.h
for a list.
index_differs_from() seems to be useful for more than builtin-revert.c,
so it is moved into diff-lib.c and also used in builtin-commit.c.
Yet to mention:
- "rev.abbrev = 0;" can be safely removed.
This has no impact on performance or functioning of neither
setup_revisions() nor run_diff_index().
- rev.pending.objects is free()d because this fixes a leak.
(Also see
295dd2ad "Fix memory leak in traverse_commit_list")
Mentored-by: Daniel Barkalow <barkalow@iabervon.org>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephan Beyer [Mon, 9 Feb 2009 22:00:45 +0000 (23:00 +0100)]
Makefile: resort filenames alphabetically
Some filenames in the Makefile got out of order.
This patch resorts the filename lists which makes it easier
to grasp that it is sorted and that this should be kept.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 9 Feb 2009 21:39:52 +0000 (13:39 -0800)]
Modernize t5400 test script
Many tests checked for failure by hand without using test_must_fail (they
probably predate the shell function).
When we know the desired outcome, explicitly check for it, instead of
checking if the result does not match one possible incorrect outcome.
E.g. if you expect a push to be refused, you do not test if the result is
different from what was pushed. Instead, make sure that the ref did not
before and after the push.
The test sequence chdir'ed around and any failure at one point could have
started the next test in an unexpected directory. Fix this problem by
using subshells as necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alexandre Julliard [Mon, 9 Feb 2009 13:39:30 +0000 (14:39 +0100)]
Describe notable git.el changes in the release notes
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 11 Feb 2009 05:31:33 +0000 (21:31 -0800)]
Revert "Merge branch 'js/notes'"
This reverts commit
7b75b331f6744fbf953fe8913703378ef86a2189, reversing
changes made to
5d680a67d7909c89af96eba4a2d77abed606292b.
Junio C Hamano [Wed, 11 Feb 2009 05:31:19 +0000 (21:31 -0800)]
Merge branch 'lh/submodule-tree-traversal' (early part)
* 'lh/submodule-tree-traversal' (early part):
tree.c: allow read_tree_recursive() to traverse gitlink entries
Junio C Hamano [Wed, 11 Feb 2009 05:31:08 +0000 (21:31 -0800)]
Merge branch 'js/git-submodule-trailing-slash'
* js/git-submodule-trailing-slash:
submodule: warn about non-submodules
Let ls-files strip trailing slashes in submodules' paths
Junio C Hamano [Wed, 11 Feb 2009 05:30:52 +0000 (21:30 -0800)]
Merge branch 'js/maint-1.6.0-path-normalize'
* js/maint-1.6.0-path-normalize:
Remove unused normalize_absolute_path()
Test and fix normalize_path_copy()
Fix GIT_CEILING_DIRECTORIES on Windows
Move sanitary_path_copy() to path.c and rename it to normalize_path_copy()
Make test-path-utils more robust against incorrect use
Junio C Hamano [Wed, 11 Feb 2009 05:30:45 +0000 (21:30 -0800)]
Merge branch 'maint'
* maint:
Clear the delta base cache during fast-import checkpoint
Junio C Hamano [Tue, 10 Feb 2009 23:32:26 +0000 (15:32 -0800)]
Merge branch 'maint-1.6.0' into maint
* maint-1.6.0:
Clear the delta base cache during fast-import checkpoint
Shawn O. Pearce [Tue, 10 Feb 2009 21:36:12 +0000 (13:36 -0800)]
Clear the delta base cache during fast-import checkpoint
Otherwise we may reuse the same memory address for a totally
different "struct packed_git", and a previously cached object from
the prior occupant might be returned when trying to unpack an object
from the new pack.
Found-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Todd Zullinger [Sun, 8 Feb 2009 23:12:43 +0000 (18:12 -0500)]
git-web--browse: Fix check for /bin/start
The previous check in git-web--browse for /bin/start used test -n
/bin/start, which was always true. This lead to "start" being tried
first in the browser list. On systems with upstart installed, "start"
exists and might be in the PATH, but it makes a poor choice for a web
browser. Instead, test that /bin/start exists and is executable.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 9 Feb 2009 06:07:53 +0000 (22:07 -0800)]
Merge branch 'maint'
* maint:
gitweb: add $prevent_xss option to prevent XSS by repository content
rev-list: fix showing distance when using --bisect-all
Ted Pavlic [Fri, 6 Feb 2009 16:05:38 +0000 (11:05 -0500)]
completion: Get rid of tabbed indentation in comments. Replace with spaces.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ted Pavlic [Fri, 6 Feb 2009 16:05:37 +0000 (11:05 -0500)]
completion: Fix GIT_PS1_SHOWDIRTYSTATE to prevent unbound variable errors.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matt McCutchen [Sun, 8 Feb 2009 00:00:09 +0000 (19:00 -0500)]
gitweb: add $prevent_xss option to prevent XSS by repository content
Add a gitweb configuration variable $prevent_xss that disables features
to prevent content in repositories from launching cross-site scripting
(XSS) attacks in the gitweb domain. Currently, this option makes gitweb
ignore README.html (a better solution may be worked out in the future)
and serve a blob_plain file of an untrusted type with
"Content-Disposition: attachment", which tells the browser not to show
the file at its original URL.
The XSS prevention is currently off by default.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Santi Béjar [Sat, 7 Feb 2009 22:21:49 +0000 (23:21 +0100)]
doc/bundle: Use the more conventional suffix '.bundle'
Although it does not matter in general it is handled different by
"git clone", as it removes it to make the "humanish" name of the
new repository.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Mon, 9 Feb 2009 05:40:42 +0000 (21:40 -0800)]
Add two extra tests for git rebase
Sitaram Chamarty [Fri, 6 Feb 2009 04:40:53 +0000 (10:10 +0530)]
Documentation: clarify commits affected by gitk --merge
Signed-off-by: Sitaram Chamarty <sitaramc@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephan Beyer [Sun, 8 Feb 2009 17:40:39 +0000 (18:40 +0100)]
add -p: get rid of Git.pm warnings about unitialized values
After invoking git add -p I always got the warnings:
Use of uninitialized value $_[3] in exec at Git.pm line 1282.
Use of uninitialized value $args[2] in join or string at Git.pm line 1264.
A bisect showed that these warnings occur in
a301973 "add -p: print errors
in separate color" the first time.
They can be reproduced by setting color.ui (or color.interactive) to "auto"
and unsetting color.interactive.help and color.interactive.error.
I am using Perl 5.10.0.
The reason of the warning is that color.interactive.error defaults to
color.interactive.help which defaults to nothing in the specific codepath.
It defaults to 'red bold' some lines above which could lead to the wrong
assumption that it always defaults to 'red bold' now.
This patch lets it default to 'red bold', blowing the warnings away.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Acked-By: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Sun, 8 Feb 2009 14:54:47 +0000 (15:54 +0100)]
rev-list: fix showing distance when using --bisect-all
Before
d467a52 ("Make '--decorate' set an explicit 'show_decorations'
flag", Nov 3 2008), commit decorations were shown whenever they exist, and
distances stored in them by "git rev-list --bisect-all" were automatically
shown.
d467a52 changed the rule so that commit decorations are not shown
unless rev_info explicitly asks to, with its show_decorations bit, but
forgot that the ones "git rev-list --bisect-all" adds need to be shown.
This patch fixes this old breakage.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marius Storm-Olsen [Sun, 8 Feb 2009 14:34:31 +0000 (15:34 +0100)]
Move mailmap documentation into separate file
Include it directly from git-shortlog.txt, and refer
to it from pretty-format.txt.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marius Storm-Olsen [Sun, 8 Feb 2009 14:34:30 +0000 (15:34 +0100)]
Change current mailmap usage to do matching on both name and email of author/committer.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marius Storm-Olsen [Sun, 8 Feb 2009 14:34:29 +0000 (15:34 +0100)]
Add map_user() and clear_mailmap() to mailmap
map_user() allows to lookup and replace both email and
name of a user, based on a new style mailmap file.
The possible mailmap definitions are now:
proper_name <commit_email> # Old style
<proper_email> <commit_email> # New style
proper_name <proper_email> <commit_email> # New style
proper_name <proper_email> commit_name <commit_email> # New style
map_email() operates the same as before, with the
exception that it also will to try to match on a name
passed in through the name return buffer.
clear_mailmap() is needed to now clear the more complex
mailmap structure.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marius Storm-Olsen [Sun, 8 Feb 2009 14:34:28 +0000 (15:34 +0100)]
Add find_insert_index, insert_at_index and clear_func functions to string_list
string_list_find_insert_index() and string_list_insert_at_index()
enables you to see if an item is in the string_list, and to
insert at the appropriate index in the list, if not there.
This is usefull if you need to manipulate an existing item,
if present, and insert a new item if not.
Future mailmap code will use this construct to enable
complex (old_name, old_email) -> (new_name, new_email)
lookups.
The string_list_clear_func() allows to call a custom
cleanup function on each item in a string_list, which is
useful is the util member points to a complex structure.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marius Storm-Olsen [Sun, 8 Feb 2009 14:34:27 +0000 (15:34 +0100)]
Add mailmap.file as configurational option for mailmap location
This allows us to augment the repo mailmap file, and to use
mailmap files elsewhere than the repository root. Meaning
that the entries in mailmap.file will override the entries
in "./.mailmap", should they match.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Fri, 6 Feb 2009 09:12:41 +0000 (10:12 +0100)]
gitweb: Better regexp for SHA-1 committag match
Make SHA-1 regexp to be turned into hyperlink (the SHA-1 committag)
to match word boundary at the beginning and the end. This way we
reduce number of false matches, for example we now don't match
0x74a5cd01 which is hex decimal (for example memory address),
but is not SHA-1.
Suggested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Sat, 7 Feb 2009 13:43:15 +0000 (14:43 +0100)]
submodule: warn about non-submodules
Earlier, when you called
git submodule some/bogus/path
Git would silently ignore the path, without warning the user about the
likely mistake. Now it does.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Sat, 7 Feb 2009 13:43:03 +0000 (14:43 +0100)]
Let ls-files strip trailing slashes in submodules' paths
Tab completion makes it easy to add a trailing slash to a submodule path.
As it is completely clear what the user actually wanted to say, be nice
and strip that slash at the end.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Sat, 7 Feb 2009 15:08:31 +0000 (16:08 +0100)]
Remove unused normalize_absolute_path()
This function is now superseded by normalize_path_copy().
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Sat, 7 Feb 2009 15:08:30 +0000 (16:08 +0100)]
Test and fix normalize_path_copy()
This changes the test-path-utils utility to invoke normalize_path_copy()
instead of normalize_absolute_path() because the latter is about to be
removed.
The test cases in t0060 are adjusted in two regards:
- normalize_path_copy() more often leaves a trailing slash in the result.
This has no negative side effects because the new user of this function,
longest_ancester_length(), already accounts for this behavior.
- The function can fail.
The tests uncover a flaw in normalize_path_copy(): If there are
sufficiently many '..' path components so that the root is reached, such as
in "/d1/s1/../../d2", then the leading slash was lost. This manifested
itself that (assuming there is a repository at /tmp/foo)
$ git add /d1/../tmp/foo/some-file
reported 'pathspec is outside repository'. This is now fixed.
Moreover, the test case descriptions of t0060 now include the test data and
expected outcome.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 7 Feb 2009 15:08:29 +0000 (16:08 +0100)]
Fix GIT_CEILING_DIRECTORIES on Windows
Using git with GIT_CEILING_DIRECTORIES crashed on Windows due to a failed
assertion in normalize_absolute_path(): This function expects absolute
paths to start with a slash, while on Windows they can start with a drive
letter or a backslash.
This fixes it by using the alternative, normalize_path_copy() instead,
which can handle Windows-style paths just fine.
Secondly, the portability macro PATH_SEP is used instead of expecting
colons to be used as path list delimiter.
The test script t1504 is also changed to help MSYS's bash recognize some
program arguments as path list. (MSYS's bash must translate POSIX-style
path lists to Windows-style path lists, and the heuristic did not catch
some cases.)
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Sat, 7 Feb 2009 15:08:28 +0000 (16:08 +0100)]
Move sanitary_path_copy() to path.c and rename it to normalize_path_copy()
This function and normalize_absolute_path() do almost the same thing. The
former already works on Windows, but the latter crashes.
In subsequent changes we will remove normalize_absolute_path(). Here we
make the replacement function reusable. On the way we rename it to reflect
that it does some path normalization. Apart from that this is only moving
around code.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Sat, 7 Feb 2009 15:08:27 +0000 (16:08 +0100)]
Make test-path-utils more robust against incorrect use
Previously, this test utility happily returned with exit code 0 if garbage
was thrown at it. Now it reports failure if an unknown function name was
given on the command line.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lars Hjemli [Sun, 25 Jan 2009 00:52:05 +0000 (01:52 +0100)]
tree.c: allow read_tree_recursive() to traverse gitlink entries
When the callback function invoked from read_tree_recursive() returns
the value `READ_TREE_RECURSIVE` for a gitlink entry, the traversal will
now continue into the tree connected to the gitlinked commit. This
functionality can be used to allow inter-repository operations, but
since the current users of read_tree_recursive() does not yet support
such operations, they have been modified where necessary to make sure
that they never return READ_TREE_RECURSIVE for gitlink entries (hence
no change in behaviour should be introduces by this patch alone).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 7 Feb 2009 19:06:34 +0000 (11:06 -0800)]
GIT 1.6.2-rc0
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 7 Feb 2009 19:10:16 +0000 (11:10 -0800)]
Merge branch 'tr/add-p-single'
* tr/add-p-single:
add -p: import Term::ReadKey with 'require'
add -p: print errors in separate color
add -p: prompt for single characters
Junio C Hamano [Sat, 7 Feb 2009 19:09:48 +0000 (11:09 -0800)]
Merge branch 'js/filter-branch-submodule'
* js/filter-branch-submodule:
filter-branch: do not consider diverging submodules a 'dirty worktree'
filter-branch: Fix fatal error on bare repositories