OSDN Git Service
Dr. David Alan Gilbert [Mon, 12 Feb 2018 16:03:39 +0000 (16:03 +0000)]
migration: Fix early failure cleanup
Avoid crash in cleanup after a very early migration failure
(possibly due to my
688a3dcba980bf01344a 'Route errors down ...')
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <
20180212160340.15333-2-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Dr. David Alan Gilbert [Tue, 13 Feb 2018 10:06:06 +0000 (10:06 +0000)]
tests/migration: Add source to PC boot block
The boot block used in the migration test is currently only
shipped as a hex (with the source in the git commit message of
ea0c6d62),
change this to actually include the source.
A script is added to rebuild the header but the expectation is that
the generated hex is shipped as well as the .s, so that
there's no requirement to have just the right assembler etc.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <
20180213100606.5379-1-dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Removed blank line at end of script
Greg Kurz [Wed, 7 Feb 2018 15:41:43 +0000 (16:41 +0100)]
migration: improve documentation of postcopy-ram
This capability must have the same value on both source and destination,
otherwise migration fails (commit
875fcd013ab6 "migration: incoming
postcopy advise sanity checks").
Let's write it down in various places where postcopy-ram is documented.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <
151801810352.29167.
4832480228518630626.stgit@bahia.lan>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Ross Lagerwall [Tue, 6 Feb 2018 16:30:39 +0000 (16:30 +0000)]
migration/xen: Check return value of qemu_fclose
QEMUFile uses buffered IO so when writing small amounts (such as the Xen
device state file), the actual write call and any errors that may occur
only happen as part of qemu_fclose(). Therefore, report IO errors when
saving the device state under Xen by checking the return value of
qemu_fclose().
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Message-Id: <
20180206163039.23661-1-ross.lagerwall@citrix.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Peter Maydell [Tue, 13 Feb 2018 18:24:07 +0000 (18:24 +0000)]
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* CAN bus (will be under network maintainner)
* scsi-block opblockers (myself)
* Dirty log bitmap cleanup (myself)
* SDHCI improvements and tests (Philippe)
* HAX support for larger guest sizese (Yu Ning)
# gpg: Signature made Tue 13 Feb 2018 15:37:14 GMT
# gpg: using RSA key
BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (48 commits)
travis: use libgcc-4.8-dev (libgcc-6-dev is not available on Ubuntu 14.04)
memory: unify loops to sync dirty log bitmap
memory: hide memory_region_sync_dirty_bitmap behind DirtyBitmapSnapshot
memory: remove memory_region_test_and_clear_dirty
g364fb: switch to using DirtyBitmapSnapshot
sdhci: add Spec v4.2 register definitions
sdhci: add a check_capab_v3() qtest
sdhci: check Spec v3 capabilities qtest
hw/arm/xilinx_zynqmp: enable the UHS-I mode
hw/arm/xilinx_zynqmp: fix the capabilities/spec version to match the datasheet
hw/arm/fsl-imx6: implement SDHCI Spec. v3
hw/arm/bcm2835_peripherals: change maximum block size to 1kB
hw/arm/bcm2835_peripherals: implement SDHCI Spec v3
sdhci: implement CMD/DAT[] fields in the Present State register
sdhci: implement UHS-I voltage switch
sdbus: add trace events
sdhci: implement the Host Control 2 register (tuning sequence)
sdhci: rename the hostctl1 register
sdhci: add support for v3 capabilities
hw/arm/xilinx_zynq: fix the capabilities register to match the datasheet
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 13 Feb 2018 16:33:31 +0000 (16:33 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,vhost,pci,pc: features, fixes and cleanups
- new stats in virtio balloon
- virtio eventfd rework for boot speedup
- vhost memory rework for boot speedup
- fixes and cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 13 Feb 2018 16:29:55 GMT
# gpg: using RSA key
281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (22 commits)
virtio-balloon: include statistics of disk/file caches
acpi-test: update FADT
lpc: drop pcie host dependency
tests: acpi: fix FADT not being compared to reference table
hw/pci-bridge: fix pcie root port's IO hints capability
libvhost-user: Support across-memory-boundary access
libvhost-user: Fix resource leak
virtio-balloon: unref the memory region before continuing
pci: removed the is_express field since a uniform interface was inserted
virtio-blk: enable multiple vectors when using multiple I/O queues
pci/bus: let it has higher migration priority
pci-bridge/i82801b11: clear bridge registers on platform reset
vhost: Move log_dirty check
vhost: Merge and delete unused callbacks
vhost: Clean out old vhost_set_memory and friends
vhost: Regenerate region list from changed sections list
vhost: Merge sections added to temporary list
vhost: Simplify ring verification checks
vhost: Build temporary section list and deref after commit
virtio: improve virtio devices initialization time
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tomáš Golembiovský [Tue, 5 Dec 2017 12:14:46 +0000 (13:14 +0100)]
virtio-balloon: include statistics of disk/file caches
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Thu, 8 Feb 2018 17:56:49 +0000 (19:56 +0200)]
acpi-test: update FADT
Previous commit ("tests: acpi: fix FADT not being compared to reference table")
started tracking changes to the FADT. Generate the expected FACP files -
apparently these weren't updated since 2013.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Thu, 8 Feb 2018 17:40:02 +0000 (19:40 +0200)]
lpc: drop pcie host dependency
Doesn't look like that header is used.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Tue, 16 Jan 2018 15:30:26 +0000 (16:30 +0100)]
tests: acpi: fix FADT not being compared to reference table
It turns out that FADT isn't actually tested for changes
against reference table, since it happens to be the 1st
table in RSDT which is currently ignored.
Fix it by making sure that all tables from RSDT are added
to test list.
NOTE: FADT contains guest allocated pointers to FACS/DSDT,
zero them out so that possible FACS/DSDT address change
won't affect test results.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Marcel Apfelbaum [Wed, 17 Jan 2018 19:19:47 +0000 (21:19 +0200)]
hw/pci-bridge: fix pcie root port's IO hints capability
The gen_pcie_root_port mem-reserve and pref32-reserve properties are
defined as size (so uint64_t), but passed as uint32_t when building
the 'IO hints' vendor specific capability.
Passing 4G (or more) gets truncated and passed as a zero reservation.
Is not a huge issue since the guest firmware will always compare the
hints with the default value and take the maximum.
Fix it by passing the values as uint64_t and failing to init the
gen_pcie_root_port id invalid values are used.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Yongji Xie [Thu, 18 Jan 2018 16:04:05 +0000 (00:04 +0800)]
libvhost-user: Support across-memory-boundary access
The sg list/indirect descriptor table may be contigious
in GPA but not in HVA address space. But libvhost-user
wasn't aware of that. This would cause out-of-bounds
access. Even a malicious guest could use it to get
information from the vhost-user backend.
Introduce a plen parameter in vu_gpa_to_va() so we can
handle this case, returning the actual mapped length.
Signed-off-by: Yongji Xie <xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Yongji Xie [Thu, 18 Jan 2018 15:41:56 +0000 (23:41 +0800)]
libvhost-user: Fix resource leak
Free the mmaped memory when we need to mmap new memory
space on vu_set_mem_table_exec() and vu_set_log_base_exec() to
avoid memory leak.
Also close the corresponding fd after mmap() on
vu_set_log_base_exec() to avoid fd leak.
Signed-off-by: Yongji Xie <xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tiwei Bie [Thu, 25 Jan 2018 07:12:43 +0000 (15:12 +0800)]
virtio-balloon: unref the memory region before continuing
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Philippe Mathieu-Daudé [Mon, 12 Feb 2018 18:46:50 +0000 (15:46 -0300)]
travis: use libgcc-4.8-dev (libgcc-6-dev is not available on Ubuntu 14.04)
Travis image is based on Ubuntu Trusty (14.04), since
d83414e1fd1 we get:
$ sudo -E \
apt-get -yq --no-install-suggests --no-install-recommends --force-yes \
install \
libaio-dev libattr1-dev libbrlapi-dev libcap-ng-dev libgcc-6-dev \
libgnutls-dev libgtk-3-dev libiscsi-dev liblttng-ust-dev \
libncurses5-dev libnfs-dev libnss3-dev libpixman-1-dev libpng12-dev \
librados-dev libsdl1.2-dev libseccomp-dev libspice-protocol-dev \
libspice-server-dev libssh2-1-dev liburcu-dev libusb-1.0-0-dev \
libvte-2.90-dev sparse uuid-dev
Reading package lists...
Building dependency tree...
Reading state information...
E: Unable to locate package libgcc-6-dev
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Paolo Bonzini [Tue, 6 Feb 2018 16:55:27 +0000 (17:55 +0100)]
memory: unify loops to sync dirty log bitmap
Now that memory_region_sync_dirty_bitmap is NULL, we can unify its
loop with memory_global_dirty_log_sync's. The only difference is
that memory_region_sync_dirty_bitmap will no longer call log_sync on
FlatRanges that do have a zero dirty_log_mask, but this is okay because
video memory is always registered with the dirty page logging mechanism.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 6 Feb 2018 17:24:13 +0000 (18:24 +0100)]
memory: hide memory_region_sync_dirty_bitmap behind DirtyBitmapSnapshot
Simplify the users of memory_region_snapshot_and_clear_dirty, so
that they do not have to call memory_region_sync_dirty_bitmap
explicitly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 6 Feb 2018 17:30:04 +0000 (18:30 +0100)]
memory: remove memory_region_test_and_clear_dirty
It is unused after g364fb has been converted to use DirtyBitmapSnapshot.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 6 Feb 2018 17:28:10 +0000 (18:28 +0100)]
g364fb: switch to using DirtyBitmapSnapshot
This removes the last user of memory_region_test_and_clear_dirty
outside memory.c.
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:18 +0000 (13:48 -0300)]
sdhci: add Spec v4.2 register definitions
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20180208164818.7961-31-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:17 +0000 (13:48 -0300)]
sdhci: add a check_capab_v3() qtest
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <
20180208164818.7961-30-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:16 +0000 (13:48 -0300)]
sdhci: check Spec v3 capabilities qtest
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-29-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:15 +0000 (13:48 -0300)]
hw/arm/xilinx_zynqmp: enable the UHS-I mode
see the Xilinx datasheet "UG1085" (v1.7)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-28-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:14 +0000 (13:48 -0300)]
hw/arm/xilinx_zynqmp: fix the capabilities/spec version to match the datasheet
checking Xilinx datasheet "UG1085" (v1.7)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-27-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:13 +0000 (13:48 -0300)]
hw/arm/fsl-imx6: implement SDHCI Spec. v3
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-26-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:12 +0000 (13:48 -0300)]
hw/arm/bcm2835_peripherals: change maximum block size to 1kB
following the datasheet.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-25-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:11 +0000 (13:48 -0300)]
hw/arm/bcm2835_peripherals: implement SDHCI Spec v3
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-24-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:10 +0000 (13:48 -0300)]
sdhci: implement CMD/DAT[] fields in the Present State register
[based on a patch from Alistair Francis <alistair.francis@xilinx.com>
from qemu/xilinx tag xilinx-v2015.2]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-23-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:09 +0000 (13:48 -0300)]
sdhci: implement UHS-I voltage switch
[based on a patch from Alistair Francis <alistair.francis@xilinx.com>
from qemu/xilinx tag xilinx-v2015.2]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-22-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:08 +0000 (13:48 -0300)]
sdbus: add trace events
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-21-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:07 +0000 (13:48 -0300)]
sdhci: implement the Host Control 2 register (tuning sequence)
[based on a patch from Alistair Francis <alistair.francis@xilinx.com>
from qemu/xilinx tag xilinx-v2015.2]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-20-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:06 +0000 (13:48 -0300)]
sdhci: rename the hostctl1 register
As per the Spec v3.00
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-19-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:05 +0000 (13:48 -0300)]
sdhci: add support for v3 capabilities
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-18-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:04 +0000 (13:48 -0300)]
hw/arm/xilinx_zynq: fix the capabilities register to match the datasheet
checking Xilinx datasheet "UG585" (v1.12.1)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-17-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:03 +0000 (13:48 -0300)]
hw/arm/exynos4210: add a comment about a very similar SDHCI (Spec. v2)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-16-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:02 +0000 (13:48 -0300)]
hw/arm/exynos4210: access the 64-bit capareg with qdev_prop_set_uint64()
We only set a 32-bit value, but this is a good practice in case this
code is used as reference.
(missed in
5efc9016e52)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-15-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:48:01 +0000 (13:48 -0300)]
sdhci: check Spec v2 capabilities (DMA and 64-bit bus)
Incorrect value will throw an error.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-14-f4bug@amsat.org>
Sai Pavan Boddu [Thu, 8 Feb 2018 16:48:00 +0000 (13:48 -0300)]
sdhci: Fix 64-bit ADMA2
The 64-bit ADMA address is not converted to the cpu endianes correctly.
This patch fixes the issue and uses a valid mask for the attribute data.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
[AF: Re-write commit message]
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-13-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:47:59 +0000 (13:47 -0300)]
sdhci: replace DMA magic value by BLOCK_SIZE_MASK
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-12-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:47:58 +0000 (13:47 -0300)]
sdhci: check the Spec v1 capabilities correctness
Incorrect value will throw an error.
Note than Spec v2 is supported by default.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-11-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:47:57 +0000 (13:47 -0300)]
sdhci: simplify sdhci_get_fifolen()
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-10-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:47:56 +0000 (13:47 -0300)]
sdhci: use a numeric value for the default CAPAB register
using many #defines is not portable when scaling to different HCI.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-9-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:47:55 +0000 (13:47 -0300)]
sdhci: add a 'spec_version property' (default to v2)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-8-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:47:54 +0000 (13:47 -0300)]
sdhci: add qtest to check the SD Spec version
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <
20180208164818.7961-7-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:47:53 +0000 (13:47 -0300)]
sdhci: add a check_capab_sdma() qtest
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <
20180208164818.7961-6-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:47:52 +0000 (13:47 -0300)]
sdhci: add a check_capab_baseclock() qtest
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <
20180208164818.7961-5-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:47:51 +0000 (13:47 -0300)]
sdhci: add check_capab_readonly() qtest
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <
20180208164818.7961-4-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:47:50 +0000 (13:47 -0300)]
sdhci: add qtest to check the SD capabilities register
The PCI model is tested with the pc/x86_64 machine,
the SysBus model with the smdkc210/arm machine.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20180208164818.7961-3-f4bug@amsat.org>
Philippe Mathieu-Daudé [Thu, 8 Feb 2018 16:47:49 +0000 (13:47 -0300)]
sdhci: use error_propagate(local_err) in realize()
avoid the "errp && *errp" pattern (not recommended in "qapi/error.h" comments).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <
20180208164818.7961-2-f4bug@amsat.org>
Marc-André Lureau [Thu, 8 Feb 2018 16:23:42 +0000 (17:23 +0100)]
build-sys: check static linking of UBSAN
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <
20180208162343.30809-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Marc-André Lureau [Thu, 8 Feb 2018 16:23:41 +0000 (17:23 +0100)]
build-sys: remove useless extra*flags variables
Only EXTRA_LDFLAGS seems to be used during configure Xen checks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <
20180208162343.30809-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 29 Jan 2018 22:30:17 +0000 (23:30 +0100)]
hw/net/can: interrupt cleanup
Define two functions to update the interrupt state, and call them
on loadvm. This removes the need to migrate the state as part of
vmstate_kvaser_pci.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pavel Pisa [Tue, 23 Jan 2018 21:04:22 +0000 (22:04 +0100)]
net/can: documentation
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Deniz Eren [Sat, 27 Jan 2018 17:11:01 +0000 (18:11 +0100)]
hw/net/can: MIOe-3680 PCI (dual SJA1000 channel) emulation
Signed-off-by: Deniz Eren <deniz.eren@icloud.com>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Deniz Eren [Mon, 29 Jan 2018 21:17:19 +0000 (22:17 +0100)]
hw/net/can: PCM-3680I PCI (dual SJA1000 channel) emulation
Signed-off-by: Deniz Eren <deniz.eren@icloud.com>
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pavel Pisa [Sat, 27 Jan 2018 17:06:57 +0000 (18:06 +0100)]
hw/net/can: Kvaser PCI CAN-S (single SJA1000 channel) emulation
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pavel Pisa [Sat, 27 Jan 2018 16:43:21 +0000 (17:43 +0100)]
hw/net/can: SJA1000 chip register level emulation for QEMU
The core SJA1000 support is independent of following
patches which map SJA1000 chip to PCI boards.
The work is based on Jin Yang GSoC 2013 work funded
by Google and mentored in frame of RTEMS project GSoC
slot donated to QEMU.
Rewritten for QEMU-2.0+ versions and architecture cleanup
by Pavel Pisa (Czech Technical University in Prague).
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pavel Pisa [Sat, 27 Jan 2018 16:59:27 +0000 (17:59 +0100)]
net/can: support for connecting to Linux host SocketCAN interface.
Connection to the real host CAN bus network through
SocketCAN network interface is available only for Linux
host system. Mechanism is generic, support for another
CAN API and operating systems can be implemented in future.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pavel Pisa [Sat, 27 Jan 2018 16:41:07 +0000 (17:41 +0100)]
net/can: simple messages transport implementation for QEMU
The CanBusState state structure is created for each
emulated CAN channel. Individual clients/emulated
CAN interfaces or host interface connection registers
to the bus by CanBusClientState structure.
The CAN core is prepared to support connection to the
real host CAN bus network. The commit with such support
for Linux SocketCAN follows.
Implementation is as simple as possible. There is no state to be
migrated, and messages prioritization and queuing are not considered
for now. But it is intended to be extended when need arises.
Development repository and more documentation at
https://gitlab.fel.cvut.cz/canbus/qemu-canbus
The work is based on Jin Yang GSoC 2013 work funded
by Google and mentored in frame of RTEMS project GSoC
slot donated to QEMU.
Rewritten for QEMU-2.0+ versions and architecture cleanup
by Pavel Pisa (Czech Technical University in Prague).
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Yu Ning [Fri, 12 Jan 2018 10:22:35 +0000 (18:22 +0800)]
hax: Support guest RAM sizes of 4GB or more
Since HAX_VM_IOCTL_ALLOC_RAM takes a 32-bit size, it cannot handle
RAM blocks of 4GB or larger, which is why HAXM can only run guests
with less than 4GB of RAM. Solve this problem by utilizing the new
HAXM API, HAX_VM_IOCTL_ADD_RAMBLOCK, which takes a 64-bit size, to
register RAM blocks with the HAXM kernel module. The new API is
first added in HAXM 7.0.0, and its availablility and be confirmed
by the presence of the HAX_CAP_64BIT_RAMBLOCK capability flag.
When the guest RAM size reaches 7GB, QEMU will ask HAXM to set up a
memory mapping that covers a 4GB region, which will fail, because
HAX_VM_IOCTL_SET_RAM also takes a 32-bit size. Work around this
limitation by splitting the large mapping into small ones and
calling HAX_VM_IOCTL_SET_RAM multiple times.
Bug: https://bugs.launchpad.net/qemu/+bug/
1735576
Signed-off-by: Yu Ning <yu.ning@intel.com>
Message-Id: <
1515752555-12784-1-git-send-email-yu.ning@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel P. Berrange [Tue, 23 Jan 2018 16:47:18 +0000 (16:47 +0000)]
make: fix help message reference to bogus V=0 variable
The make rules for building QEMU are mostly silent by default. They can
be made verbose by setting the variable V=1. The default state does not
however correspond to a V=0 setting - $(V) must be undefined / empty to
get the default quiet build.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <
20180123164718.12714-3-berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel P. Berrange [Tue, 23 Jan 2018 16:47:17 +0000 (16:47 +0000)]
Revert "build-sys: silence make by default or V=0"
This reverts commit
42a77f1ce4934b243df003f95bda88530631387a.
The primary intention of this change was to silence messages
like
make[1]: '/home/berrange/src/virt/qemu/capstone/libcapstone.a' is up to date.
which we get when calling make recursively with explicit
targets.
The problem is that this change affected every make target,
not merely the targets that triggered these "is up to date"
messages. As a result any targets that were not invoking
commands via "$(call quiet-command ...)" suddenly become
silent. This is particularly bad for "make install" which
now appears todo nothing.
Rather than go through every make rule and try to identify
places where we now need to explicitly print a message to
show work taking place, just revert the change.
To address the original problem of silencing "is up to date"
messages, we simply add --quiet to the SUBDIR_MAKEVARS
variable, so it only affects us on recursive make calls.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <
20180123164718.12714-2-berrange@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Tue, 13 Feb 2018 09:51:52 +0000 (09:51 +0000)]
Revert "tests: use memfd in vhost-user-test"
This reverts commit
7e49f5e8e508ed020c96798b3f7083e24e0e425b.
This commit seems to break parallel 'make -j4 check';
revert it until we identify the problem.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 12 Feb 2018 14:52:48 +0000 (14:52 +0000)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-
20180212' into staging
ppc patch queue 2018-02-12
Here's the accumulatead ppc and pseries related patches for the last
while. Highlights are:
* A number of Macintosh / CUDA cleanups from Mark Cave-Ayland
* An important bug fix (missing "break;") for
H_GET_CPU_CHARACTERISTICS
* Yet another fix for SMT mode handling
* Assorted other cleanups and fixes
# gpg: Signature made Mon 12 Feb 2018 03:39:30 GMT
# gpg: using RSA key
6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.12-
20180212:
misc: introduce new mos6522 VIA device and enable it for ppc builds
cuda: factor out timebase-derived counter value and load time
cuda: set timer 1 frequency property to CUDA_TIMER_FREQ
cuda: don't call cuda_update() when writing to ACR register
cuda: minor cosmetic tidy-ups to get_next_irq_time()
cuda: rename frequency property to tb_frequency
cuda: introduce CUDAState parameter to get_counter()
spapr: set vsmt to MAX(8, smp_threads)
cuda: don't allow writes to port output pins
cuda: do not use old_mmio accesses
hw/ppc: rename functions in comments
spapr: add missing break in h_get_cpu_characteristics()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 12 Feb 2018 13:00:03 +0000 (13:00 +0000)]
Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into staging
trivial patches for 2018-02-10
# gpg: Signature made Sat 10 Feb 2018 07:54:03 GMT
# gpg: using RSA key
701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59
* remotes/mjt/tags/trivial-patches-fetch:
tests/qapi: use ARRAY_SIZE macro
tests/qapi: use QEMU_IS_ALIGNED macro
tests/hbitmap: use ARRAY_SIZE macro
async: use ARRAY_SIZE macro
qga: use ARRAY_SIZE macro
MAINTAINERS: Add qemu-binfmt-conf.sh script
oslib-posix: check for posix_memalign in configure script
maint: Mention web site maintenance in README
build: fix typo in error message
configure: Allow capstone=git only if git update is not disabled
scripts/make-release: Don't archive .git files
qemu-options.hx: Remove confusing spaces in parameter listings
mailmap: set preferred spelling for Daniel Berrangé
Drop unneeded system header includes
machine: Polish -machine xxx,help
scripts/argparse.py: spelling (independant)
qapi-schema.json: spelling (independant comparation)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 12 Feb 2018 09:36:28 +0000 (09:36 +0000)]
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-02-09' into staging
nbd patches for 2018-02-09
- Vladimir Sementsov-Ogievskiy: iotests: 205: support luks format
- Eric Blake: block: Simplify bdrv_can_write_zeroes_with_unmap()
# gpg: Signature made Fri 09 Feb 2018 18:34:20 GMT
# gpg: using RSA key
A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2018-02-09:
block: Simplify bdrv_can_write_zeroes_with_unmap()
iotests: 205: support luks format
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mark Cave-Ayland [Fri, 9 Feb 2018 18:51:39 +0000 (18:51 +0000)]
misc: introduce new mos6522 VIA device and enable it for ppc builds
The MOS6522 VIA forms the bridge part of several Mac devices, including the
Mac via-cuda and via-pmu devices. Introduce a standard mos6522 device that
can be shared amongst multiple implementations.
This is effectively taking the 6522 parts out of cuda.c and turning them
into a separate device whilst also applying some style tidy-ups and including
a conversion to trace-events.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Fri, 9 Feb 2018 18:51:38 +0000 (18:51 +0000)]
cuda: factor out timebase-derived counter value and load time
Commit
b981289c49 "PPC: Cuda: Use cuda timer to expose tbfreq to guest" altered
the timer calculations from those based upon the hardware CUDA clock frequency
to those based upon the CPU timebase frequency.
In fact we can isolate the differences to 2 simple changes: one to the counter
read value and another to the counter load time. Move these changes into
separate functions so the implementation can be swapped later.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Fri, 9 Feb 2018 18:51:37 +0000 (18:51 +0000)]
cuda: set timer 1 frequency property to CUDA_TIMER_FREQ
Now that we have successfully decoupled the timebase frequency and the hardware
timer frequency, set the timer 1 frequency property to CUDA_TIMER_FREQ and alter
get_next_irq_time() to use it rather than the hard-coded constant.
In addition to this we must now switch the tb_diff calculation over to use the
timebase frequency now that the hardware clock frequency and the timebase
frequency are different.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
[dwg: Correct a conflict due to a bug in an earlier patch]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Fri, 9 Feb 2018 18:51:33 +0000 (18:51 +0000)]
cuda: don't call cuda_update() when writing to ACR register
The wire protocol for reading data to/from the VIA is triggered by changing
inputs on port B rather than changing the timer configuration via the ACR.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Fri, 9 Feb 2018 18:51:36 +0000 (18:51 +0000)]
cuda: minor cosmetic tidy-ups to get_next_irq_time()
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Fri, 9 Feb 2018 18:51:35 +0000 (18:51 +0000)]
cuda: rename frequency property to tb_frequency
This allows us to more easily differentiate between the timebase frequency used
to calibrate the MacOS timers and the actual frequency of the hardware clock as
indicated by CUDA_TIMER_FREQ.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[dwg: Revert some extraneous changes which break compile]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Fri, 9 Feb 2018 18:51:34 +0000 (18:51 +0000)]
cuda: introduce CUDAState parameter to get_counter()
This will be required shortly and also happens to match nicely with the
corresponding signature for set_counter().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Laurent Vivier [Fri, 9 Feb 2018 08:18:58 +0000 (09:18 +0100)]
spapr: set vsmt to MAX(8, smp_threads)
We ignore silently the value of smp_threads when we set
the default VSMT value, and if smp_threads is greater than VSMT
kernel is going into trouble later.
Fixes:
8904e5a750
("spapr: Adjust default VSMT value for better migration compatibility")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Philippe Mathieu-Daudé [Tue, 18 Jul 2017 06:10:05 +0000 (03:10 -0300)]
tests/qapi: use ARRAY_SIZE macro
Applied using the Coccinelle semantic patch scripts/coccinelle/use_osdep.cocci
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Philippe Mathieu-Daudé [Tue, 18 Jul 2017 06:10:04 +0000 (03:10 -0300)]
tests/qapi: use QEMU_IS_ALIGNED macro
Applied using the Coccinelle semantic patch scripts/coccinelle/use_osdep.cocci
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Philippe Mathieu-Daudé [Tue, 18 Jul 2017 06:10:03 +0000 (03:10 -0300)]
tests/hbitmap: use ARRAY_SIZE macro
Applied using the Coccinelle semantic patch scripts/coccinelle/use_osdep.cocci
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Philippe Mathieu-Daudé [Tue, 18 Jul 2017 06:09:59 +0000 (03:09 -0300)]
async: use ARRAY_SIZE macro
Applied using the Coccinelle semantic patch scripts/coccinelle/use_osdep.cocci
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Philippe Mathieu-Daudé [Tue, 18 Jul 2017 06:09:57 +0000 (03:09 -0300)]
qga: use ARRAY_SIZE macro
Applied using the Coccinelle semantic patch scripts/coccinelle/use_osdep.cocci
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Mark Cave-Ayland [Fri, 9 Feb 2018 18:51:32 +0000 (18:51 +0000)]
cuda: don't allow writes to port output pins
Use the direction registers as a mask to ensure that only input pins are
updated upon write.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Thomas Huth [Tue, 2 Jan 2018 16:25:26 +0000 (17:25 +0100)]
MAINTAINERS: Add qemu-binfmt-conf.sh script
qemu-binfmt-conf.sh is used for the Linux usermode emulation, so
let's add this file to that section in the MAINTAINERS file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Mark Cave-Ayland [Fri, 9 Feb 2018 18:51:31 +0000 (18:51 +0000)]
cuda: do not use old_mmio accesses
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Andreas Gustafsson [Thu, 4 Jan 2018 17:39:36 +0000 (19:39 +0200)]
oslib-posix: check for posix_memalign in configure script
Check for the presence of posix_memalign() in the configure script,
not using "defined(_POSIX_C_SOURCE) && !defined(__sun__)". This
lets qemu use posix_memalign() on NetBSD versions that have it,
instead of falling back to valloc() which is wasteful when the
required alignment is smaller than a page.
Signed-off-by: Andreas Gustafsson <gson@gson.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Eric Blake [Wed, 29 Nov 2017 15:25:10 +0000 (09:25 -0600)]
maint: Mention web site maintenance in README
Now that we have a website that accepts patches on the list, the
main project should make it easier to find information about that
process.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Fam Zheng <famz@redhat.com>
Laurent Vivier [Fri, 19 Jan 2018 10:32:33 +0000 (11:32 +0100)]
build: fix typo in error message
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fixes:
f62bbee55d503f639ee9498878ebf42ff4f4299a
Alexey Kardashevskiy [Mon, 15 Jan 2018 02:35:01 +0000 (13:35 +1100)]
configure: Allow capstone=git only if git update is not disabled
Even with --disable-git-update, ./configure tries updating the capstone
submodule instead of marking it "no"; this disables capstone submodule
if git update is disabled.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cole Robinson [Tue, 30 Jan 2018 19:33:35 +0000 (14:33 -0500)]
scripts/make-release: Don't archive .git files
As was last done in
379e21c25, we don't want .git files for
submodules here, which we aren't presently doing for capstone and
keycodemapdb.
Rather than delete the offending files before archiving, ask tar
to --exclude=.git
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Tue, 30 Jan 2018 09:36:21 +0000 (10:36 +0100)]
qemu-options.hx: Remove confusing spaces in parameter listings
The spaces between the parameters in the chardev and tpmdev sections
are rather confusing than helpful, and prevent that the lists can be
copy-n-pasted easily for real usage. We also don't use such spaces
in other sections in the documentation, e.g. with the -netdev option,
so let's be consistent and remove the spaces in the chardev and tpmdev
sections, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel P. Berrangé [Fri, 2 Feb 2018 18:26:59 +0000 (18:26 +0000)]
mailmap: set preferred spelling for Daniel Berrangé
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Eric Blake [Wed, 7 Feb 2018 16:03:02 +0000 (10:03 -0600)]
Drop unneeded system header includes
<memory.h> is a non-standard obsolete header that was long ago
replaced by <string.h>.
<malloc.h> is a non-standard header; it is not obsolete (we must
use it for malloc_trim, for example), but generally should not
be used in files that just need malloc() and friends, where
<stdlib.h> is the standard header.
And since osdep.h already guarantees string.h and stdlib.h, we
can drop these unusual system header includes as redundant
rather than replacing them.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Alexey Kardashevskiy [Thu, 26 Oct 2017 01:41:39 +0000 (12:41 +1100)]
machine: Polish -machine xxx,help
The "-machine xxx,help" prints kernel-irqchip possible values as
"OnOffSplit", this adds separators to the printed line.
Also, since only lower case letters are specified in qapi/common.json,
this changes the letter cases too.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Thu, 11 Jan 2018 14:31:06 +0000 (17:31 +0300)]
scripts/argparse.py: spelling (independant)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Michael Tokarev [Thu, 11 Jan 2018 14:20:16 +0000 (17:20 +0300)]
qapi-schema.json: spelling (independant comparation)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Daniel Henrique Barboza [Fri, 9 Feb 2018 18:13:30 +0000 (16:13 -0200)]
hw/ppc: rename functions in comments
Commit
bcb5ce08cf ("spapr: Rename machine init functions for clarity")
renamed ppc_spapr_reset to spapr_machine_reset and ppc_spapr_init
to spapr_machine_init. Let's also rename the references in
comments.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Thu, 1 Feb 2018 19:47:41 +0000 (20:47 +0100)]
spapr: add missing break in h_get_cpu_characteristics()
Detected by Coverity (CID
1385702). This fixes the recently added hypercall
to let guests properly apply Spectre and Meltdown workarounds.
Fixes:
c59704b25473 "target/ppc/spapr: Add H-Call H_GET_CPU_CHARACTERISTICS"
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Eric Blake [Fri, 26 Jan 2018 19:34:39 +0000 (13:34 -0600)]
block: Simplify bdrv_can_write_zeroes_with_unmap()
We don't need the can_write_zeroes_with_unmap field in
BlockDriverInfo, because it is redundant information with
supported_zero_flags & BDRV_REQ_MAY_UNMAP. Note that
BlockDriverInfo and supported_zero_flags are both per-device
settings, rather than global state about the driver as a
whole, which means one or both of these bits of information
can already be conditional. Let's audit how they were set:
crypto: always setting can_write_ to false is pointless (the
struct starts life zero-initialized), no use of supported_
nbd: just recently fixed to set can_write_ if supported_
includes MAY_UNMAP (thus this commit effectively reverts
bca80059e and solves the problem mentioned there in a more
global way)
file-posix, iscsi, qcow2: can_write_ is conditional, while
supported_ was unconditional; but passing MAY_UNMAP would
fail with ENOTSUP if the condition wasn't met
qed: can_write_ is unconditional, but pwrite_zeroes lacks
support for MAY_UNMAP and supported_ is not set. Perhaps
support can be added later (since it would be similar to
qcow2), but for now claiming false is no real loss
all other drivers: can_write_ is not set, and supported_ is
either unset or a passthrough
Simplify the code by moving the conditional into
supported_zero_flags for all drivers, then dropping the
now-unused BDI field. For callers that relied on
bdrv_can_write_zeroes_with_unmap(), we return the same
per-device settings for drivers that had conditions (no
observable change in behavior there); and can now return
true (instead of false) for drivers that support passthrough
(for example, the commit driver) which gives those drivers
the same fix as nbd just got in
bca80059e. For callers that
relied on supported_zero_flags, we now have a few more places
that can avoid a wasted call to pwrite_zeroes() that will
just fail with ENOTSUP.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
20180126193439.20219-1-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Vladimir Sementsov-Ogievskiy [Tue, 6 Feb 2018 18:25:07 +0000 (21:25 +0300)]
iotests: 205: support luks format
Support default luks options in VM.add_drive and in new library
function qemu_img_create. Use it in 205 iotests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <
20180206182507.21753-1-vsementsov@virtuozzo.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Peter Maydell [Fri, 9 Feb 2018 16:12:34 +0000 (16:12 +0000)]
Merge remote-tracking branch 'remotes/stsquad/tags/pull-travis-speedup-090218-1' into staging
One patch to mitigate Travis timeouts
# gpg: Signature made Fri 09 Feb 2018 14:13:46 GMT
# gpg: using RSA key
FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-travis-speedup-090218-1:
.travis.yml: add --disable-linux-user for some jobs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 9 Feb 2018 14:39:09 +0000 (14:39 +0000)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2018-02-07-v4' into staging
Miscellaneous patches for 2018-02-07
# gpg: Signature made Fri 09 Feb 2018 12:52:51 GMT
# gpg: using RSA key
3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-misc-2018-02-07-v4:
Move include qemu/option.h from qemu-common.h to actual users
Drop superfluous includes of qapi/qmp/qjson.h
Drop superfluous includes of qapi/qmp/dispatch.h
Include qapi/qmp/qnull.h exactly where needed
Include qapi/qmp/qnum.h exactly where needed
Include qapi/qmp/qbool.h exactly where needed
Include qapi/qmp/qstring.h exactly where needed
Include qapi/qmp/qdict.h exactly where needed
Include qapi/qmp/qlist.h exactly where needed
Include qapi/qmp/qobject.h exactly where needed
qdict qlist: Make most helper macros functions
Eliminate qapi/qmp/types.h
Typedef the subtypes of QObject in qemu/typedefs.h, too
Include qmp-commands.h exactly where needed
Drop superfluous includes of qapi/qmp/qerror.h
Include qapi/error.h exactly where needed
Drop superfluous includes of qapi-types.h and test-qapi-types.h
Clean up includes
Use #include "..." for our own headers, <...> for others
vnc: use stubs for CONFIG_VNC=n dummy functions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée [Wed, 7 Feb 2018 15:19:25 +0000 (15:19 +0000)]
.travis.yml: add --disable-linux-user for some jobs
The modules and co-routine builds are only really relevant to softmmu
builds and regularly timeout on Travis. Let's disable linux-user
builds here for more headroom.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>