OSDN Git Service
Olof Johansson [Tue, 15 Jun 2021 15:10:12 +0000 (08:10 -0700)]
Merge tag 'imx-bindings-5.14' of git://git./linux/kernel/git/shawnguo/linux into arm/dt
i.MX dt-bindings update for 5.14:
- Add vendor prefixes for congatec GmbH and DaSheng, Inc.
- Add compatibles for i.MX6Q DaSheng COM-9XX SBC, GE B1x5pv2 and
i.MX8MM GW7901 boards.
- Add an optional 'resets' property for i.MX GPCv2 bindings.
* tag 'imx-bindings-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: add GE B1x5pv2 boards
dt-bindings: vendor-prefixes: add congatec
dt-bindings: imx: gpcv2: add support for optional resets
dt-bindings: arm: imx: Add i.mx6q DaSheng COM-9XX SBC
dt-bindings: add dasheng vendor prefix
dt-bindings: arm: imx: add imx8mm gw7901 support
Link: https://lore.kernel.org/r/20210613082544.16067-3-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 15 Jun 2021 15:08:14 +0000 (08:08 -0700)]
Merge tag 'keystone_dts_for_5.13' of git://git./linux/kernel/git/ssantosh/linux-keystone into arm/dt
ARM: DTS: Keystone K2G cleanup for v5.13
- Rename message manager node
- Rename the TI-SCI node and clock
- assign clock to McAsp
* tag 'keystone_dts_for_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone: k2g-evm: Move audio oscillator assigned clock to mcasp
ARM: dts: keystone: k2g: Rename the TI-SCI clocks node name
ARM: dts: keystone: k2g: Rename the TI-SCI node
ARM: dts: keystone: k2g: Rename message-manager node
Link: https://lore.kernel.org/r/1623564020-9958-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Corentin Labbe [Fri, 11 Jun 2021 22:05:01 +0000 (00:05 +0200)]
ARM: dts: gemini: add crypto node
The SL3516 SoC has a crypto offloader IP.
This patch adds it on the gemini SoC Device-tree.
Link: https://lore.kernel.org/r/20210611220501.684997-1-linus.walleij@linaro.org
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:54:28 +0000 (08:54 -0700)]
Merge tag 'sunxi-dt-for-5.14-1' of https://git./linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to improve the Allwinner SoCs support,
mainly:
- I2S Support for the V3
- Audio Codec Support for the V3s
- DMA support for the V3s
- PWM support for the V3s
- Support for Bluetooth Audio on the pinephone
- Add A10-like timers to the A64 and R40
- New boards: Forlinx OKA40i-C, Forlinx OKA40i-C, NanoPi R1S H5
* tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (29 commits)
ARM: dts: sun8i: v3s: enable emac for zero Dock
arm64: dts: allwinner: pinephone: Set audio card name
ARM: dts: sun8i: r40: Add timer node
ARM: dts: sun8i: V3: add I2S interface to V3 dts
dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible
ARM: dts: sun8i: V3: add codec analog frontend to V3 dts
ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3
ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts
ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA
ARM: dts: sun8i: v3s: add DMA controller to v3s dts
ARM: dts: sun8i: v3s: add pwm controller to v3s dts
dt-bindings: pwm: allwinner: add v3s pwm compatible
arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
dt-bindings: arm: Add NanoPi R1S H5
arm64: dts: allwinner: pinephone: Add support for Bluetooth audio
arm64: dts: allwinner: a64: Allow multiple DAI links
arm64: dts: allwinner: a64: Add pinmux nodes for AIF2/AIF3
arm64: dts: allwinner: a64: Allow using multiple codec DAIs
ARM: dts: sun8i-a33: Allow using multiple codec DAIs
ASoC: dt-bindings: sun8i-codec: Increase #sound-dai-cells
...
Link: https://lore.kernel.org/r/96cc77ec-139d-4685-8a66-a60964cf39fd.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:49:10 +0000 (08:49 -0700)]
Merge tag 'at91-dt-5.14' of git://git./linux/kernel/git/at91/linux into arm/dt
AT91 dt for 5.14:
- A fix for sama5d4 gpio mux
- A trivial fix for DT documentation
* tag 'at91-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
dt-bindings: i2c: at91: fix example for scl-gpios
ARM: dts: at91: sama5d4: fix pinctrl muxing
Link: https://lore.kernel.org/r/20210611123446.20510-1-nicolas.ferre@microchip.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:47:54 +0000 (08:47 -0700)]
Merge tag 'v5.13-next-dts64' of https://git./linux/kernel/git/matthias.bgg/linux into arm/dt
mt8173:
- split hardware encoder block into two devices.
mt8167:
- add pm domains, multi-media system (mmsys), SMI, local arbiter
(larb) and IOMMU nodes.
mt8183:
- Add new chromebooks: HP Chromebook 11a, Acer Chromebook 311, HP
Chromebook x360 11MK G3 EE, Lenovo IdeaPad Flex 3.
- add power domain to SMI common node.
- add power supplies for EEPROM node.
* tag 'v5.13-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (21 commits)
arm64: dts: mt8183: Add node for the Mali GPU
arm64: dts: mt8183-kukui: Add tboard thermal zones
arm64: dts: mt8183: add cbas node under cros_ec
arm64: dts: mt8183: add supply name for eeprom
arm64: dts: mt8183: remove syscon from smi_common node
arm64: dts: mt8183: Add kukui-jacuzzi-fennel board
arm64: dts: mt8183: Add kukui-jacuzzi-kenzo board
arm64: dts: mt8183: Add kukui-jacuzzi-burnet board
arm64: dts: mt8183: Add kukui-jacuzzi-willow board
arm64: dts: mt8183: Add kukui-jacuzzi-kappa board
dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-fennel
dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-kenzo
dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-burnet
dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-willow
dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-kappa
arm64: dts: mediatek: mt8167: add iommu node
arm64: dts: mediatek: mt8167: add larb nodes
arm64: dts: mediatek: mt8167: add smi_common node
arm64: dts: mediatek: mt8167: add mmsys node
arm64: dts: mediatek: mt8167: add power domains
...
Link: https://lore.kernel.org/r/117d5eb5-bc99-70bb-a1a9-d7141fe96527@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:46:26 +0000 (08:46 -0700)]
Merge tag 'renesas-dt-bindings-for-v5.14-tag1' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.14
- Document support for the new RZ/G2L, RZ/G2LC, and RZ/G2UL SoCs,
- Document support for the new RZ/G2L SMARC EVK board.
* tag 'renesas-dt-bindings-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: power: renesas,rzg2l-sysc: Add DT binding documentation for SYSC controller
dt-bindings: arm: renesas: Document SMARC EVK
dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants
dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC
Link: https://lore.kernel.org/r/cover.1623403802.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:45:36 +0000 (08:45 -0700)]
Merge tag 'renesas-arm-dt-for-v5.14-tag2' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.14 (take two)
- External interrupt (INTC-EX) support for the R-Car M3-W+ SoC,
- Initial support for the new RZ/G2L SoC on the RZ/G2L SMARC EVK
board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r9a07g044: Add SYSC node
arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK
arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
dt-bindings: clock: Add r9a07g044 CPG Clock Definitions
arm64: dts: renesas: r8a779a0: Drop power-domains property from GIC node
arm64: dts: renesas: r8a77961: Add INTC-EX device node
ARM: dts: silk: Configure pull-up for SOFT_SW GPIO keys
ARM: dts: gose: Configure pull-up for SOFT_SW GPIO keys
ARM: dts: blanche: Configure pull-up for SOFT_SW and SW25 GPIO keys
ARM: dts: lager: Configure pull-up for SOFT_SW GPIO keys
arm64: dts: renesas: r8a7796[01]: Fix OPP table entry voltages
arm64: dts: renesas: Add missing opp-suspend properties
Link: https://lore.kernel.org/r/cover.1623403796.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:42:54 +0000 (08:42 -0700)]
Merge tag 'juno-fix-5.14' of git://git./linux/kernel/git/sudeep.holla/linux into arm/dt
ARMv8 Juno fix for v5.14
Just a single fix to use standard and generic nodes names for SCMI
power domain controller and clock controller devicetree nodes.
* tag 'juno-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Update SCPI nodes as per the YAML schema
Link: https://lore.kernel.org/r/20210611075805.2813712-1-sudeep.holla@arm.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:41:04 +0000 (08:41 -0700)]
Merge tag 'ux500-dts-v5.14' of git://git./linux/kernel/git/linusw/linux-nomadik into arm/dt
Some Ux500 DTS updates for v5.14:
- Fix interrupt cells, GPIO controller node names in accordance
with new YAML schemas.
- Add proper compatible strings for Broadcomm Wifi and BT.
- Fix upp and add some mount matrices for accelerometers so
e.g. UI:s work as they should.
- Drop the DRDY pin assignment for a non-existing pin on a
magnetometer.
* tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ux500: Fix orientation of Janice accelerometer
ARM: dts: href: Mount matrices for TVK R2
ARM: dts: ux500: Fix some compatible strings
ARM: dts: ux500: Drop drdy pin assignment from magnetometer
ARM: dts: ux500: Fix orientation of accelerometer
ARM: dts: ux500: Rename gpio-controller node
ARM: dts: ux500: Fix interrupt cells
Link: https://lore.kernel.org/r/CACRpkdYh9kZJU6PAxghPRGBco_61wRZgUnTZr_3qvySPCo5rBw@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:40:27 +0000 (08:40 -0700)]
Merge tag 'arm-soc/for-5.14/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs changes for 5.14,
please pull the following:
- Zhen fixes the Broadcom stingray serial node unit names to fix a DT
binding warning
* tag 'arm-soc/for-5.14/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: normalize the node name of the UART devices
Link: https://lore.kernel.org/r/20210610194836.309869-2-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:40:07 +0000 (08:40 -0700)]
Merge tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.14, please pull the following:
- Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS
files to resolve a number of DT binding check warnings pertaining to
NAND, pinmux, clocks, SPI
- Stefan provides a fix for an increase in the DWC2 controller's RX FIFO
causing regressions on the Raspberry Pi 4B
- Mateusz adds a BCM2711 specific VEC compatible string to allow keying
off that variant properly
- Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI
re-organization work and finally adding the DTS file proper
* tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Add reference to RPi 400
ARM: dts: Add Raspberry Pi 400 support
ARM: dts: bcm283x: Fix up GPIO LED node names
dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema
ARM: dts: Move BCM2711 RPi specific into separate dtsi
ARM: dts: bcm283x: Fix up MMC node names
ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible
Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size"
ARM: dts: BCM5301X: Fixup SPI binding
dt-bindings: clock: brcm, iproc-clocks: convert to the json-schema
ARM: dts: BCM5301X: Fix pinmux subnodes names
ARM: dts: Hurricane 2: Fix NAND nodes names
ARM: dts: BCM63xx: Fix NAND nodes names
ARM: NSP: dts: fix NAND nodes names
ARM: Cygnus: dts: fix NAND nodes names
ARM: brcmstb: dts: fix NAND nodes names
ARM: dts: BCM5301X: Fix NAND nodes names
Link: https://lore.kernel.org/r/20210610194836.309869-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:39:40 +0000 (08:39 -0700)]
Merge tag 'stm32-dt-for-v5.14-1' of git://git./linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.14, round 1
Highlights:
-----------
MCU part:
- Fixes for Yaml verifications
MPU part:
- Configure qspi's mdma transfer to block for stm32mp151
- ST boards:
- Fixes for yaml verifications
- DH boards:
- Fixes for yaml verifications
- Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence.
- Odyssey boards:
- fix Sd card detectection (gpio line updated)
- fix eMMC VQMMC suuply (use vdd instead of v3v3)
* tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: fix stpmic node for stm32mp1 boards
ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM
ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM
ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM
ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply
ARM: dts: stm32: add a new DCMI pins group on stm32mp15
ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7
dt-bindings: net: document ptp_ref clk in dwmac
ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings
ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings
ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
ARM: dts: stm32: fix RCC node name on stm32f429 MCU
ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin
ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151
ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2
ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2
ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM
Link: https://lore.kernel.org/r/e4bfb255-63fb-74a8-d591-eb09821c93ee@foss.st.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:38:10 +0000 (08:38 -0700)]
Merge tag 'samsung-dt-5.14' of https://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.14
1. Several cleanups and alignment with dtschema. This includes removal
of unused properties and fixing LED brightness property.
2. Enable PMIC RTC interrupt as a wakeup source (intended to wakeup for
example from Suspend to RAM where the PMIC RTC's power is still
supplied).
3. Disable unused/not implemented camera on GT-I9100.
* tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Disable unused camera input for I9100
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU3/XU4 family
ARM: dts: exynos: enable PMIC wakeup from suspend on SMDK5420
ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale Octa
ARM: dts: exynos: enable PMIC wakeup from suspend on P4 Note
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid X/U3
ARM: dts: exynos: enable PMIC wakeup from suspend on Midas
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU
ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale
ARM: dts: exynos: enable PMIC wakeup from suspend on Origen4412
ARM: dts: exynos: enable PMIC wakeup from suspend on Itop Core
ARM: dts: s5pv210: remove unused Atmel touchscreen properties in Goni
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4
ARM: dts: exynos: fix PWM LED max brightness on Odroid HC1
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3
ARM: dts: exynos: replace legacy MMS114 touchscreen x/y properties in GT-N7100
ARM: dts: exynos: align Broadcom WiFi with dtschema
Link: https://lore.kernel.org/r/20210610074055.12474-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:35:45 +0000 (08:35 -0700)]
Merge tag 'aspeed-5.14-devicetree' of git://git./linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 5.14
- IBM Rainier and Everest LED descriptions. These systems have a large
number of LEDs attached via expanders.
- Ampere Mt Jade updates, as OpenBMC bringup continues for this
machine.
- Updated 64MB flash layout for systems using OpenBMC on NOR root file
systems.
- Support for HS200 MMC on AST2600 EVB. This is only supported from A2,
so a new device tree is added to support A0 and A1.
- Update all command lines for early serial output.
* tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: everest: Add pcie cable card indicator leds
ARM: dts: aspeed: everest: Add vrm and other indicator leds
ARM: dts: aspeed: everest: Add dimm indicator leds
ARM: dts: aspeed: everest: Add pcie slot indicator leds
ARM: dts: aspeed: everest: Add nvme and fan indicator leds
ARM: dts: aspeed: everest: Add system level indicator leds
ARM: dts: aspeed-g5: Add SCU phandle to GFX node
ARM: dts: aspeed: Everest: Add directly controlled LEDs
ARM: dts: aspeed: Rainier 4U: Remove fan updates
ARM: dts: aspeed: Everest: Fix cable card PCA chips
ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout
ARM: dts: aspeed: mtjade: switch to 64MB flash layout
ARM: dts: aspeed: mtjade: Add PSU support
ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI
ARM: dts: aspeed: Set earlycon boot argument
ARM: dts: aspeed-g6: Add pinctrl settings
ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0
ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller.
ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.
Link: https://lore.kernel.org/r/CACPK8XduV9F=piu1qh56g+YNOZOBYTW7b2Y=XVYafpYDwWmDYA@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Walleij [Sat, 5 Jun 2021 16:10:07 +0000 (18:10 +0200)]
ARM: dts: ixp4xx: Add crypto engine
Add the crypto engine as a child of the NPE.
Link: https://lore.kernel.org/r/20210605161007.3397216-1-linus.walleij@linaro.org
Cc: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:34:12 +0000 (08:34 -0700)]
Merge tag 'amlogic-arm64-dt-for-v5.14' of https://git./linux/kernel/git/amlogic/linux into arm/dt
Amlogic ARM64 DT changed for v5.14:
- set 128bytes FIFO size on uart A
- add Banana PI BPI-M5 board dts & bindings
- meson-sm1: add toacodec node to use internal audio DAC
- enable hdmi audio loopback on VIM3 board
* tag 'amlogic-arm64-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: meson: set 128bytes FIFO size on uart A
arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts
dt-bindings: arm: amlogic: add Banana PI M5 bindings
arm64: dts: meson-sm1: add toacodec node
arm64: dts: meson: vim3: enable hdmi audio loopback
Link: https://lore.kernel.org/r/bb207cf8-fc7a-3121-eea8-56618b5952aa@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:33:21 +0000 (08:33 -0700)]
Merge tag 'omap-for-v5.14/dt-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.14 merge window
Mostly just clean-up for device tree binding checks with
few other clean-up patches:
- Drop ov5640 sensor for dra76-evm, it's just one of the
optional additional sensors and makes hard to use any of
the other options, TI is using the devicetree overlay
snippets for these
- Group the phandles in osd3358-sm-red to make the files
more readable
- A series of gpio clean-up patches to follow the binding
documentation
- Move ti,no-reset related properties to the target module
level, the ti-sysc driver handles them also in the child
but they really belong to the target module
- Drop the unnecessary uart compatible entries to make the
binding check to work
- Mailbox related updates to make the binding check to
work
* tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
ARM: dts: AM33xx/AM43xx: Rename wkup_m3 sub-mailbox node
ARM: dts: OMAP2/OMAP3: Rename processor sub-mailbox nodes
ARM: dts: OMAP2420: Drop interrupt-names from mailbox node
ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes
ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes
ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios
ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
ARM: dts: omap5-board-common: align gpio hog names with dt-schema
ARM: dts: omap3: align gpio hog names with dt-schema
ARM: dts: am437x: align gpio hog names with dt-schema
ARM: dts: am335x: align GPIO hog names with dt-schema
ARM: dts: osd3358-sm-red: group in the same phandle all its properties
ARM: dts: dra76-evm: remove ov5640
Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-3
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:26:56 +0000 (08:26 -0700)]
Merge tag 'renesas-arm-dt-for-v5.14-tag1' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.14
- GPIO extender support for the Falcon development board,
- Switches support for the ALT development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: alt: Add SW2 as GPIO keys
ARM: dts: renesas: Move enable-method to CPU nodes
arm64: dts: renesas: beacon: Fix USB ref clock references
arm64: dts: renesas: beacon: Fix USB extal reference
ARM: dts: rcar-gen1: Correct internal delay for i2c[123]
arm64: dts: renesas: eagle: Add x1 clock
ARM: dts: koelsch: Rename sw2 to keyboard
ARM: dts: r8a7779, marzen: Fix DU clock names
arm64: dts: renesas: v3msk: Fix memory size
arm64: dts: renesas: condor: Switch eMMC bus to 1V8
arm64: dts: renesas: falcon-csi-dsi: Add GPIO extenders
arm64: dts: renesas: beacon kit: Setup AVB refclk
arm64: dts: renesas: Add fck to etheravb-rcar-gen3 clock-names list
ARM: dts: renesas: Add fck to etheravb-rcar-gen2 clock-names list
Link: https://lore.kernel.org/r/cover.1622188835.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:25:17 +0000 (08:25 -0700)]
Merge tag 'gemini-dts-v5.14-1' of git://git./linux/kernel/git/linusw/linux-nomadik into arm/dt
Gemini device tree updates for the v5.14 kernel:
- MAINTAINERS fix for the DTS files
- Drop a duplicate ethernet node on the RUT1xx DTS
- Add device_type to the PCI node
- Fix up some DTS syntax so it agrees with the schemas merged
for the v5.14 merge window
* tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: gemini: remove xxx-cells from display
ARM: dts: gemini-dlink-dir-685: Remove address from display port
ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2c
ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2c
ARM: dts: gemini: convert obsolete SPI properties
ARM: dts: gemini: use the right rtc compatible
ARM: dts: gemini: add device_type on pci
ARM: dts: gemini-rut1xx: remove duplicate ethernet node
ARM: dts: gemini: rename mdio to the right name
MAINTAINERS: gemini: add missing dts pattern
Link: https://lore.kernel.org/r/CACRpkdZWpLAcAStq8dEyGL_d9Bvp-WNPu-2EuJw1eTL4kyvgig@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 12 Jun 2021 15:24:49 +0000 (08:24 -0700)]
Merge tag 'ixp4xx-dts-v5.14-1' of git://git./linux/kernel/git/linusw/linux-nomadik into arm/dt
IXP4xx DTS updates for the v5.14 kernel:
- Add ethernet to the boards
- Add PCI hosts to the boards
- Create an expansion bus around the flash memory
- Add the beeper to NSLU2 completing the NSLU2 DTS
* tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Fix up the IXP4xx ethernet nodes
ARM: dts: ixp4xx: Add beeper to the NSLU2
ARM: dts: ixp4xx: Create a proper expansion bus
ARM: dts: ixp4xx: Add PCI hosts
ARM: dts: ixp4xx: Add ethernet
Link: https://lore.kernel.org/r/CACRpkdbmRjGW7vpr7hG+jiRTqNMZAyKZNhtvzj=SqhZmb1+F6A@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Corentin Labbe [Tue, 4 May 2021 19:34:57 +0000 (19:34 +0000)]
ARM: dts: add intel-ixp42x-welltech-epbx100
This patch adds devicetree for intel-ixp42x-welltech-epbx100.
Link: https://lore.kernel.org/r/20210504193457.4008384-6-clabbe@baylibre.com
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Corentin Labbe [Tue, 4 May 2021 19:34:56 +0000 (19:34 +0000)]
dt-bindings: arm: intel-ixp4xx: add welltech,epbx100
Adds welltech,epbx100 as a valid intel-ixp4xx board.
Link: https://lore.kernel.org/r/20210504193457.4008384-5-clabbe@baylibre.com
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Corentin Labbe [Tue, 4 May 2021 19:34:55 +0000 (19:34 +0000)]
dt-bindings: add vendor prefix for welltech
Add vendor prefix for Welltech computer Co Ld.
Link: https://lore.kernel.org/r/20210504193457.4008384-4-clabbe@baylibre.com
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Sebastian Reichel [Wed, 26 May 2021 15:22:42 +0000 (17:22 +0200)]
dt-bindings: arm: fsl: add GE B1x5pv2 boards
Document the compatible for GE B1x5pv2 boards.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Sebastian Reichel [Wed, 26 May 2021 15:22:41 +0000 (17:22 +0200)]
dt-bindings: vendor-prefixes: add congatec
Document binding for congatec.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alexandre Torgue [Thu, 15 Apr 2021 10:10:33 +0000 (12:10 +0200)]
ARM: dts: stm32: fix stpmic node for stm32mp1 boards
On some STM32 MP15 boards, stpmic node is not correct which generates
warnings running "make dtbs_check W=1" command. Issues are:
-"regulator-active-discharge" is not a boolean but an uint32.
-"regulator-over-current-protection" is not a valid entry for vref_ddr.
-LDO4 has a fixed voltage (3v3) so min/max entries are not allowed.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Marek Vasut [Thu, 10 Jun 2021 00:25:52 +0000 (02:25 +0200)]
ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM
Fix the following dtbs_check warning:
spi-flash@0: $nodename:0: 'spi-flash@0' does not match '^flash(@.*)?$'
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Marek Vasut [Thu, 10 Jun 2021 00:25:51 +0000 (02:25 +0200)]
ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM
Fix the following dtbs_check warning:
eth@1,0: $nodename:0: 'eth@1,0' does not match '^ethernet(@.*)?$'
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Marek Vasut [Thu, 10 Jun 2021 00:25:50 +0000 (02:25 +0200)]
ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM
Fix the following dtbs_check warning:
touchscreen@38: 'linux,wakeup' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Grzegorz Szymaszek [Thu, 3 Jun 2021 15:40:48 +0000 (17:40 +0200)]
ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply
The Seeed SoM-STM32MP157C device tree had the eMMC’s (SDMMC2) VQMMC
supply set to v3v3 (buck4), the same as the VMMC supply. That was
incorrect, as on the SoM, the VQMMC supply is provided from vdd (buck3)
instead.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Lad Prabhakar [Wed, 9 Jun 2021 16:37:17 +0000 (17:37 +0100)]
arm64: dts: renesas: r9a07g044: Add SYSC node
Add SYSC node to RZ/G2L (R9A07G044) SoC .dtsi.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210609163717.3083-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Lad Prabhakar [Wed, 9 Jun 2021 15:32:30 +0000 (16:32 +0100)]
arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK
Add basic support for RZ/G2L SMARC EVK (based on R9A07G044L2):
- memory
- External input clock
- SCIF
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210609153230.6967-12-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Lad Prabhakar [Wed, 9 Jun 2021 15:32:29 +0000 (16:32 +0100)]
arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
Add initial DTSI for RZ/G2{L,LC} SoC's.
File structure:
r9a07g044.dtsi => RZ/G2L family SoC common parts
r9a07g044l1.dtsi => RZ/G2L R9A07G044L1 SoC specific parts
r9a07g044l2.dtsi => RZ/G2L R9A07G044L2 SoC specific parts
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210609153230.6967-11-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Geert Uytterhoeven [Thu, 10 Jun 2021 13:34:50 +0000 (15:34 +0200)]
Merge tag 'renesas-r9a07g044-dt-binding-defs-tag' into renesas-arm-dt-for-v5.14
Renesas RZ/G2L DT Binding Definitions
Clock definitions for the Renesas RZ/G2L (R9A07G044) SoC, shared by
driver and DT source files.
Grzegorz Szymaszek [Thu, 3 Jun 2021 15:34:18 +0000 (17:34 +0200)]
ARM: dts: stm32: add a new DCMI pins group on stm32mp15
The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output.
stm32mp15-pinctrl.dtsi contained one pin state definition for the DCMI
interface, dcmi-0, AKA phandle dcmi_pins_a. This definition was
incompatible with the pins used on the Odyssey board, where:
- there are 8 data pins instead of 12,
- DCMI_HSYNC is available at PA4 instead of PH8,
- DCMI_D0 is at PC6 instead of PH9,
- DCMI_D3 is at PE1 instead of PH12,
- DCMI_D4 is at PE11 instead of PH14,
- DCMI_D5 is at PD3 instead of PI4,
- DCMI_D6 is at PE13 instead of PB8,
- DCMI_D7 is at PB9 instead of PE6.
Add the DCMI pins used on the Odyssey board as a new DCMI pin state
definition, dcmi-1, AKA phandle dcmi_pins_b.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Lad Prabhakar [Wed, 9 Jun 2021 16:37:15 +0000 (17:37 +0100)]
dt-bindings: power: renesas,rzg2l-sysc: Add DT binding documentation for SYSC controller
Add DT binding documentation for SYSC controller found on
RZ/G2{L,LC,UL} SoC's.
SYSC block contains the LSI_DEVID register which is used to retrieve
SoC product information.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210609163717.3083-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Lad Prabhakar [Wed, 9 Jun 2021 15:32:22 +0000 (16:32 +0100)]
dt-bindings: arm: renesas: Document SMARC EVK
Document Renesas SMARC EVK board which are based on RZ/G2L (R9A07G044)
SoC. The SMARC EVK consists of RZ/G2L SoM module and SMARC carrier board,
the SoM module sits on top of carrier board.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210609153230.6967-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Lad Prabhakar [Wed, 9 Jun 2021 15:32:21 +0000 (16:32 +0100)]
dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants
Add device tree bindings documentation for Renesas RZ/G2{L,LC}
SoC variants.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210609153230.6967-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Lad Prabhakar [Wed, 9 Jun 2021 15:32:20 +0000 (16:32 +0100)]
dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC
Add device tree bindings documentation for Renesas RZ/G2UL SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210609153230.6967-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Lad Prabhakar [Wed, 9 Jun 2021 15:32:25 +0000 (16:32 +0100)]
dt-bindings: clock: Add r9a07g044 CPG Clock Definitions
Define RZ/G2L (R9A07G044) Clock Pulse Generator Core Clock
and module clock outputs, as listed in Table 8.3 ("Clock List")
of the RZ/G2L Hardware User's Manual (Rev.0.42, Feb.2021).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210609153230.6967-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Alexandre Torgue [Thu, 15 Apr 2021 10:10:37 +0000 (12:10 +0200)]
ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7
It prevents the following warning:
pin-controller@
50002000: 'ltdc' does not match any of the regexes:
'-[0-9]*$', '^gpio@[0-9a-f]*$', 'pinctrl-[0-9]+'
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Alexandre Torgue [Thu, 15 Apr 2021 10:10:32 +0000 (12:10 +0200)]
dt-bindings: net: document ptp_ref clk in dwmac
ptp_ref clk has been added in DT but not documented which makes yaml
validation failed:
ethernet@
5800a000: clocks: [[6, 105], [6, 103], [6, 104], [6, 123],
[6, 169], [6, 112]] is too long
ethernet@
5800a000: clock-names: ['stmmaceth', 'mac-clk-tx', 'mac-clk-rx',
'eth-ck', 'ptp_ref', 'ethstp'] is too long
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Alexandre Torgue [Thu, 15 Apr 2021 10:10:31 +0000 (12:10 +0200)]
ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
It fixes the following warning seen running "make dtbs_check W=1"
Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty
reg/ranges property
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Alexandre Torgue [Thu, 15 Apr 2021 10:10:30 +0000 (12:10 +0200)]
ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings
Replace upper case by lower case in i2c nodes name.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Alexandre Torgue [Thu, 15 Apr 2021 10:10:29 +0000 (12:10 +0200)]
ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings
Update node name to avoid a DT schema validation issue seen with
"make dtbs_check W=1". It also cleans picntrl dtsi files for f429/f469 MCU.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Florian Fainelli [Wed, 9 Jun 2021 19:04:28 +0000 (12:04 -0700)]
Merge tag 'tags/bcm2835-dt-next-2021-06-08-v2' into devicetree/next
- Fixup MMC node names
- Fixup led node names
- Introduce new devicetree file for Raspberry Pi 400
- Introduce devicetree bindings for Raspberry Pi 400
- Fix issue with dwc2's FIFO's size
- Add VEC compatible for bcm2711
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Nicolas Boichat [Fri, 21 May 2021 12:00:41 +0000 (20:00 +0800)]
arm64: dts: mt8183: Add node for the Mali GPU
Add a basic GPU node for mt8183, as well as OPP table.
Note that with the current panfrost driver, devfreq is not
actually functional, as the we do not have platform-specific
support for >1 supplies. Also, we are missing code to handle
frequency change, as the GPU frequency needs to be switched
away to a stable 26Mhz clock during the transition.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Link: https://lore.kernel.org/r/20210521200038.v14.1.I9f45f5c1f975422d58b5904d11546349e9ccdc94@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Sudeep Holla [Tue, 8 Jun 2021 14:51:33 +0000 (15:51 +0100)]
arm64: dts: juno: Update SCPI nodes as per the YAML schema
The SCPI YAML schema expects standard node names for clocks and
power domain controllers. Fix those as per the schema for Juno
platforms.
Link: https://lore.kernel.org/r/20210608145133.2088631-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Michael Kao [Fri, 4 Jun 2021 09:37:55 +0000 (17:37 +0800)]
arm64: dts: mt8183-kukui: Add tboard thermal zones
Add tboard thermal zones.
The tboard thermal sensors are a kind of NTC sensors which are located
on PCB board to correlate the temperature of the case (Tskin).
pull-up voltage: 1800 mv
pull-up resistor: 75K
Vsense = pull-up voltage * Rntc / ( pull-up resistor + Rntc )
AuxIn = Vsense * 4096 / 1500
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210604093755.13288-1-ben.tseng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Ikjoon Jang [Wed, 9 Jun 2021 03:25:54 +0000 (11:25 +0800)]
arm64: dts: mt8183: add cbas node under cros_ec
Add a 'cbas' device node for supporting tablet mode switch in
kukui devices.
Kukui platforms with detacheable base have an additional input
device under cros-ec, which reports SW_TABLET_MODE regarding
its base state (e.g. base flipped or detached).
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210609032554.2443675-1-ikjn@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Stefan Wahren [Sun, 6 Jun 2021 12:16:17 +0000 (14:16 +0200)]
arm64: dts: broadcom: Add reference to RPi 400
This adds a reference to the dts of the Raspberry Pi 400,
so we don't need to maintain the content in arm64.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://lore.kernel.org/r/1622981777-5023-8-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Stefan Wahren [Sun, 6 Jun 2021 12:16:16 +0000 (14:16 +0200)]
ARM: dts: Add Raspberry Pi 400 support
The Raspberry Pi 400 is like a Pi 4 B designed into a keyboard. But there
are some minor differences:
- higher CPU clock rate (1.8 GHz)
- different Wifi chip (BCM43456)
- power off is now handled via GPIO
- no ACT LED
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-7-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Stefan Wahren [Sun, 6 Jun 2021 12:16:15 +0000 (14:16 +0200)]
ARM: dts: bcm283x: Fix up GPIO LED node names
Fix the node names for the GPIO LEDs to conform to the standard node
name led-..
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-6-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Stefan Wahren [Sun, 6 Jun 2021 12:16:14 +0000 (14:16 +0200)]
dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema
Add new Raspberry Pi 400 to DT schema.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1622981777-5023-5-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Stefan Wahren [Sun, 6 Jun 2021 12:16:13 +0000 (14:16 +0200)]
ARM: dts: Move BCM2711 RPi specific into separate dtsi
There is a lot of Raspberry Pi specific stuff (neither SoC or board
specific) for the BCM2711 which is currently in the RPi 4 B dts. In order
to avoid copy & paste for every new BCM2711 based Raspberry Pi, move it
into a separate dtsi.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-4-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Stefan Wahren [Sun, 6 Jun 2021 12:16:11 +0000 (14:16 +0200)]
ARM: dts: bcm283x: Fix up MMC node names
Fix the node names for the MMC/SD card controller to conform
to the standard node name mmc@..
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-2-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Mateusz Kwiatkowski [Thu, 20 May 2021 15:03:44 +0000 (17:03 +0200)]
ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible
The BCM2711 has a slightly different VEC than the one found in the older
SoCs. Now that we support the new variant, add its compatible to the
device tree.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210520150344.273900-5-maxime@cerno.tech
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Stefan Wahren [Sat, 29 May 2021 13:02:51 +0000 (15:02 +0200)]
Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size"
This reverts commit
278407a53c3b33fb820332c4d39eb39316c3879a.
The original change breaks USB config on Raspberry Pi Zero and Pi 4 B,
because it exceeds the total fifo size of 4080. A naive attempt to reduce
g-tx-fifo-size doesn't help on Raspberry Pi Zero. So better go back.
Fixes:
278407a53c3b ("ARM: dts: bcm283x: increase dwc2's RX FIFO size")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/1622293371-5997-1-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Geert Uytterhoeven [Tue, 1 Jun 2021 15:12:50 +0000 (17:12 +0200)]
arm64: dts: renesas: r8a779a0: Drop power-domains property from GIC node
"make dtbs_check":
arm64/boot/dts/renesas/r8a779a0-falcon.dt.yaml: interrupt-controller@
f1000000: 'power-domains' does not match any of the regexes: '^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$', '^gic-its@', '^interrupt-controller@[0-9a-f]+$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
Remove the "power-domains" property, as the GIC on R-Car V3U is
always-on, and not part of a clock domain.
Fixes:
834c310f541839b6 ("arm64: dts: renesas: Add Renesas R8A779A0 SoC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/a9ae5cbc7c586bf2c6b18ddc665ad7051bd1d206.1622560236.git.geert+renesas@glider.be
Geert Uytterhoeven [Tue, 1 Jun 2021 11:36:12 +0000 (13:36 +0200)]
arm64: dts: renesas: r8a77961: Add INTC-EX device node
Populate the device node for the Interrupt Controller for External
Devices (INTC-EX) on R-Car M3-W+, which serves external IRQ pins
IRQ[0-5].
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/6f3cc1a1b6d777e743a7a9e66a80aaf9d5232a4f.1622547125.git.geert+renesas@glider.be
Vishwanatha Subbanna [Mon, 7 Jun 2021 03:12:59 +0000 (12:42 +0930)]
ARM: dts: aspeed: everest: Add pcie cable card indicator leds
These are leds on the IBM proprietary PCIE cards called cable cards.
Cable cards have 2 ports on them and each port has an indicator led.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-7-joel@jms.id.au
Vishwanatha Subbanna [Mon, 7 Jun 2021 03:12:58 +0000 (12:42 +0930)]
ARM: dts: aspeed: everest: Add vrm and other indicator leds
This commit adds indicator leds for vrms, processors, opencapi
connectors, tpm, planar, power distribution card and dasd
backplane and are driven by PIC16F882.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-6-joel@jms.id.au
Vishwanatha Subbanna [Mon, 7 Jun 2021 03:12:57 +0000 (12:42 +0930)]
ARM: dts: aspeed: everest: Add dimm indicator leds
These are dimm indicator leds driven by PIC16F882.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-5-joel@jms.id.au
Vishwanatha Subbanna [Mon, 7 Jun 2021 03:12:56 +0000 (12:42 +0930)]
ARM: dts: aspeed: everest: Add pcie slot indicator leds
These are pcie slot indicator leds driven by PCA9552.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-4-joel@jms.id.au
Vishwanatha Subbanna [Mon, 7 Jun 2021 03:12:55 +0000 (12:42 +0930)]
ARM: dts: aspeed: everest: Add nvme and fan indicator leds
These are the indicator leds for nvme slots and fans and are
driven by PCA9552.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-3-joel@jms.id.au
Vishwanatha Subbanna [Mon, 7 Jun 2021 03:12:54 +0000 (12:42 +0930)]
ARM: dts: aspeed: everest: Add system level indicator leds
These are the system level indicator leds that are driven by
PCA9551 connected to the Operator Panel.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-2-joel@jms.id.au
Nishanth Menon [Fri, 4 Jun 2021 20:32:47 +0000 (13:32 -0700)]
ARM: dts: keystone: k2g-evm: Move audio oscillator assigned clock to mcasp
Setting assigned clock with a dependency on itself for k2g_clks
creates a circular dependency. Instead, Lets model the audio clock
as a assigned-clock configuration for mcasp and set it up as the
first clock assigned-clock to be satisfied. Following the standard
convention, we use null entries to indicate entries that doesn't need
to be programmed.
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Nishanth Menon [Fri, 4 Jun 2021 20:12:59 +0000 (13:12 -0700)]
ARM: dts: keystone: k2g: Rename the TI-SCI clocks node name
We currently use clocks as the node name for the node representing
TI-SCI clock nodes. This is better renamed to being clock-controller
as that is a better representative of the system controller function
as a clock controller for the SoC.
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Nishanth Menon [Fri, 4 Jun 2021 20:12:31 +0000 (13:12 -0700)]
ARM: dts: keystone: k2g: Rename the TI-SCI node
Lets rename the node name of TI-SCI node to be system-controller as it
is a better standardized name for the function that TI-SCI plays in
the SoC.
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Nishanth Menon [Fri, 4 Jun 2021 20:11:55 +0000 (13:11 -0700)]
ARM: dts: keystone: k2g: Rename message-manager node
Rename message-manager instance node name to be better aligned with
current style of device tree nodes for mailboxes.
Reviewed-by: Tero Kristo <kristo@kernel.org>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Rafał Miłecki [Wed, 12 May 2021 13:07:09 +0000 (15:07 +0200)]
ARM: dts: BCM5301X: Fixup SPI binding
1. Reorder interrupts
2. Fix typo: s/spi_lr_overhead/spi_lr_overread/
3. Rename node: s/spi-nor@0/flash@0/
This fixes:
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi@
18029200: interrupt-names: 'oneOf' conditional failed, one must be fixed:
['spi_lr_fullness_reached', 'spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted'] is too long
Additional items are not allowed ('spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted' were unexpected)
'mspi_done' was expected
'spi_l1_intr' was expected
'mspi_halted' was expected
'spi_lr_fullness_reached' was expected
'spi_lr_session_aborted' was expected
'spi_lr_impatient' was expected
'spi_lr_session_done' was expected
'spi_lr_overread' was expected
From schema: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi-nor@0: $nodename:0: 'spi-nor@0' does not match '^flash(@.*)?$'
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Nicolas Ferre [Fri, 4 Jun 2021 13:19:25 +0000 (15:19 +0200)]
dt-bindings: i2c: at91: fix example for scl-gpios
The SCL gpio pin used by I2C bus for recovery needs to be configured as
open drain, so fix the binding example accordingly.
In relation with fix
c5a283802573 ("ARM: dts: at91: Configure I2C SCL
gpio as open drain").
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes:
19e5cef058a0 ("dt-bindings: i2c: at91: document optional bus recovery properties")
Joel Stanley [Thu, 3 Jun 2021 06:45:36 +0000 (16:15 +0930)]
ARM: dts: aspeed-g5: Add SCU phandle to GFX node
In v5.13 the DRM driver gained support for using a phandle to the SCU,
instead of matching on the scu compatible.
Link: https://lore.kernel.org/r/20210603064536.165297-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Vishwanatha Subbanna [Fri, 30 Apr 2021 19:00:00 +0000 (14:00 -0500)]
ARM: dts: aspeed: Everest: Add directly controlled LEDs
These LEDs are directly connected to the BMC's GPIO bank
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Eddie James [Fri, 30 Apr 2021 18:59:59 +0000 (13:59 -0500)]
ARM: dts: aspeed: Rainier 4U: Remove fan updates
The 4U fans do not need a different "tach-pulses" property than the 2U
machine. In addition, the "maxim,fan-dual-tach" property does not exist
upstream yet, so it should also be removed.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Santosh Puranik [Fri, 30 Apr 2021 18:59:58 +0000 (13:59 -0500)]
ARM: dts: aspeed: Everest: Fix cable card PCA chips
Correct two PCA chips which were placed on the wrong I2C bus and
address.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Troy Lee [Tue, 16 Mar 2021 08:59:32 +0000 (08:59 +0000)]
ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout
Aspeed AST2600 u-boot requires 600KiB+ flash space. Sharing the same
openbmc-flash-layout-64.dtsi requires to resize the flash partition.
The updated flash layout as follows:
- u-boot: 896 KiB
- u-boot-env: 128 KiB
- kernel: 9MiB
- rofs: 32 MiB
- rwfs: 22 MiB
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210316085932.2601-1-troy_lee@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Quan Nguyen [Mon, 17 May 2021 04:00:36 +0000 (11:00 +0700)]
ARM: dts: aspeed: mtjade: switch to 64MB flash layout
As the 32MB flash layout will soon be exhausted, switch to 64MB layout.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-4-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Quan Nguyen [Mon, 17 May 2021 04:00:35 +0000 (11:00 +0700)]
ARM: dts: aspeed: mtjade: Add PSU support
Enable PSU support on Ampere's Mt. Jade BMC.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-3-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Quan Nguyen [Mon, 17 May 2021 04:00:34 +0000 (11:00 +0700)]
ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI
Enable OCP card support on Ampere's Mt. Jade BMC.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-2-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Joel Stanley [Wed, 26 May 2021 05:12:20 +0000 (14:42 +0930)]
ARM: dts: aspeed: Set earlycon boot argument
Most of the aspeed boards have copied the 'earlyprink' string in
the bootargs. However, there's no earlyprink driver configured in the
defconfigs, so this does nothing.
A combination of setting stdout in the chosen node and adding earlycon
to bootargs causes early serial output to appear early. This changes all
boards to use this option.
The console=ttyS4,115200 option is still required, as this is used by
the run time uart driver.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Alexander Filippov <a.filippov@yadro.com>
Link: https://lore.kernel.org/r/20210526051220.136432-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Steven Lee [Tue, 25 May 2021 05:53:06 +0000 (13:53 +0800)]
ARM: dts: aspeed-g6: Add pinctrl settings
AST2600 supports 2 SGPIO master interfaces and 2 SGPIO slave interfaces.
Currently, only SGPIO master 1 and SGPIO slve 1 in the pinctrl dtsi.
SGPIO master 2 and slave 2 should be added in pinctrl dtsi as well.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210525055308.31069-3-steven_lee@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Hsin-Yi Wang [Thu, 27 May 2021 07:55:56 +0000 (15:55 +0800)]
arm64: dts: mt8183: add supply name for eeprom
Add supplies for eeprom for mt8183 boards.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210527075556.1709140-5-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Hsin-Yi Wang [Tue, 1 Jun 2021 04:00:14 +0000 (12:00 +0800)]
arm64: dts: mt8183: remove syscon from smi_common node
We don't need to register smi_common as syscon. Also add required
property power-domains for this node.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210601040014.2970805-1-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Ludovic Desroches [Fri, 25 Oct 2019 08:42:10 +0000 (10:42 +0200)]
ARM: dts: at91: sama5d4: fix pinctrl muxing
Fix pinctrl muxing, PD28, PD29 and PD31 can be muxed to peripheral A. It
allows to use SCK0, SCK1 and SPI0_NPCS2 signals.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes:
679f8d92bb01 ("ARM: at91/dt: sama5d4: add pioD pin mux mask and enable pioD")
Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20191025084210.14726-1-ludovic.desroches@microchip.com
Alexandre Torgue [Thu, 15 Apr 2021 10:10:27 +0000 (12:10 +0200)]
ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
Prevent warning seen with "make dtbs_check W=1" command:
Warning (avoid_unnecessary_addr_size): /soc/timers@
40001c00: unnecessary
address-cells/size-cells without "ranges" or child "reg" property
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Alexandre Torgue [Thu, 15 Apr 2021 10:10:26 +0000 (12:10 +0200)]
ARM: dts: stm32: fix RCC node name on stm32f429 MCU
This prevent warning observed with "make dtbs_check W=1"
Warning (simple_bus_reg): /soc/rcc@
40023810: simple-bus unit address format
error, expected "
40023800"
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Alexandre Torgue [Thu, 15 Apr 2021 10:10:25 +0000 (12:10 +0200)]
ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
Fix following warning observed with "make dtbs_check W=1" command.
It concerns f429 eval and disco boards, f769 disco board.
Warning (unit_address_vs_reg): /gpio_keys/button@0: node has a unit name,
but no reg or ranges property
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Grzegorz Szymaszek [Sat, 10 Apr 2021 19:35:21 +0000 (21:35 +0200)]
ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin
The microSD card detect pin is physically connected to the MPU pin PI3.
The Device Tree configuration of the card detect pin was wrong—it was
set to pin PB7 instead. If such configuration was used, the kernel would
hang on “Waiting for root device” when booting from a microSD card.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Neil Armstrong [Tue, 18 May 2021 07:58:33 +0000 (09:58 +0200)]
arm64: dts: meson: set 128bytes FIFO size on uart A
The first UART controller in "Everything-Else" power domain, usually used
for Bluetooth HCI has 128bytes FIFO depth.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210518075833.3736038-4-narmstrong@baylibre.com
Patrice Chotard [Mon, 26 Apr 2021 10:45:36 +0000 (12:45 +0200)]
ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151
Configure qspi's mdma from buffer transfer (max 128 bytes) to
block transfer (max 64K bytes).
mtd_speedtest shows that write throughtput increases :
- from 734 to 782 KiB/s (~6.5%) with s25fl512s SPI-NOR.
- from 4848 to 5319 KiB/s (~9.72%) with Micron SPI-NAND.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Marek Vasut [Mon, 26 Apr 2021 15:00:13 +0000 (17:00 +0200)]
ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2
Fix make dtbs_check warning:
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml:0:0: /soc/i2c@
40015000/polytouch@38: failed to match any schema with compatible: ['edt,edt-ft5x06']
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Marek Vasut [Mon, 26 Apr 2021 15:00:12 +0000 (17:00 +0200)]
ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2
Fix make dtbs_check warning:
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: gpio-keys-polled: '#address-cells' is a dependency of '#size-cells'
arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: gpio-keys: '#address-cells' is a dependency of '#size-cells'
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Timon Baetz [Sun, 30 May 2021 10:55:44 +0000 (10:55 +0000)]
ARM: dts: exynos: Disable unused camera input for I9100
As the back camera is not implemented disable the second pair of fimc
child nodes as they are not functional. This prevents creating the
associated /dev/videoX devices.
Signed-off-by: Timon Baetz <timon.baetz@protonmail.com>
Link: https://lore.kernel.org/r/20210530105535.4165-1-timon.baetz@protonmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Marek Vasut [Thu, 8 Apr 2021 23:00:01 +0000 (01:00 +0200)]
ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM
The Microchip LAN8710Ai PHY requires XTAL1/CLKIN external clock to be
enabled when the nRST is toggled according to datasheet Microchip
LAN8710A/LAN8710Ai DS00002164B page 35 section 3.8.5.1 Hardware Reset:
"
A Hardware reset is asserted by driving the nRST input pin low. When
driven, nRST should be held low for the minimum time detailed in
Section 5.5.3, "Power-On nRST & Configuration Strap Timing," on page
59 to ensure a proper transceiver reset. During a Hardware reset, an
external clock must be supplied to the XTAL1/CLKIN signal.
"
This is accidentally fulfilled in the current setup, where ETHCK_K is used
to supply both PHY XTAL1/CLKIN and is also fed back through eth_clk_fb to
supply ETHRX clock of the DWMAC. Hence, the DWMAC enables ETHRX clock,
that has ETHCK_K as parent, so ETHCK_K clock are also enabled, and then
the PHY reset toggles.
However, this is not always the case, e.g. in case the PHY XTAL1/CLKIN
clock are supplied by some other clock source than ETHCK_K or in case
ETHRX clock are not supplied by ETHCK_K. In the later case, ETHCK_K would
be kept disabled, while ETHRX clock would be enabled, so the PHY would
not be receiving XTAL1/CLKIN clock and the reset would fail.
Improve the DT by adding the PHY clock phandle into the PHY node, which
then also requires moving the PHY reset GPIO specifier in the same place
and that then also requires correct PHY reset GPIO timing, so add that
too.
A brief note regarding the timing, the datasheet says the reset should
stay asserted for at least 100uS and software should wait at least 200nS
after deassertion. Set both delays to 500uS which should be plenty.
Fixes:
34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Andreas Rehn [Tue, 25 May 2021 17:31:59 +0000 (19:31 +0200)]
ARM: dts: sun8i: v3s: enable emac for zero Dock
dwmac-sun8i supports v3s and
Licheepi-zero Dock provides an ethernet port
furthermore, align nodes in alphabetical order
Signed-off-by: Andreas Rehn <rehn.andreas86@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210525173159.183415-1-rehn.andreas86@gmail.com
Geert Uytterhoeven [Fri, 30 Apr 2021 13:10:55 +0000 (15:10 +0200)]
ARM: dts: silk: Configure pull-up for SOFT_SW GPIO keys
The GPIO pins connected to the 4 Software Switches ("SOFT_SW", SW12) do
not have external pull-up resistors, but rely on internal pull-ups being
enabled. Fortunately this is satisfied by the initial state of these
pins.
Make this explicit by enabling bias-pull-up, to remove the dependency on
initial state and/or boot loader configuration.
While at it, rename the surrounding device node from "gpio-keys" to
"keyboard", to comply with generic node name recommendations.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/45f38a5333feba9bea80efeb5a41a6c3f60deda2.1619785905.git.geert+renesas@glider.be
Geert Uytterhoeven [Fri, 30 Apr 2021 13:10:54 +0000 (15:10 +0200)]
ARM: dts: gose: Configure pull-up for SOFT_SW GPIO keys
The GPIO pins connected to the 4 Software Switches ("SOFT_SW", SW2) do
not have external pull-up resistors, but rely on internal pull-ups being
enabled. Fortunately this is satisfied by the initial state of these
pins.
Make this explicit by enabling bias-pull-up, to remove the dependency on
initial state and/or boot loader configuration.
While at it, rename the surrounding device node from "gpio-keys" to
"keyboard", to comply with generic node name recommendations.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1cdec892b1491309b12bdaf7bc8428b3a19b1ed5.1619785905.git.geert+renesas@glider.be
Geert Uytterhoeven [Fri, 30 Apr 2021 13:10:53 +0000 (15:10 +0200)]
ARM: dts: blanche: Configure pull-up for SOFT_SW and SW25 GPIO keys
The GPIO pins connected to the 4 Software Switches (SW2) and the second
Tact Switch (SW25) do not have external pull-up resistors, but rely on
internal pull-ups being enabled. Fortunately this is satisfied by the
initial state of these pins.
Make this explicit by enabling bias-pull-up, to remove the dependency on
initial state and/or boot loader configuration.
Note that the GPIO pin connected to the first Tact Switch (SW24) does
have an external pull-up resistor.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/011e4c461767f2dd690b655b3dd501eb554184c1.1619785905.git.geert+renesas@glider.be