OSDN Git Service
Radoslaw Tyl [Thu, 24 Aug 2023 20:46:19 +0000 (13:46 -0700)]
igb: set max size RX buffer when store bad packet is enabled
Increase the RX buffer size to 3K when the SBP bit is on. The size of
the RX buffer determines the number of pages allocated which may not
be sufficient for receive frames larger than the set MTU size.
Cc: stable@vger.kernel.org
Fixes:
89eaefb61dc9 ("igb: Support RX-ALL feature flag.")
Reported-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kuniyuki Iwashima [Thu, 24 Aug 2023 16:50:59 +0000 (09:50 -0700)]
netrom: Deny concurrent connect().
syzkaller reported null-ptr-deref [0] related to AF_NETROM.
This is another self-accept issue from the strace log. [1]
syz-executor creates an AF_NETROM socket and calls connect(), which
is blocked at that time. Then, sk->sk_state is TCP_SYN_SENT and
sock->state is SS_CONNECTING.
[pid 5059] socket(AF_NETROM, SOCK_SEQPACKET, 0) = 4
[pid 5059] connect(4, {sa_family=AF_NETROM, sa_data="..." <unfinished ...>
Another thread calls connect() concurrently, which finally fails
with -EINVAL. However, the problem here is the socket state is
reset even while the first connect() is blocked.
[pid 5060] connect(4, NULL, 0 <unfinished ...>
[pid 5060] <... connect resumed>) = -1 EINVAL (Invalid argument)
As sk->state is TCP_CLOSE and sock->state is SS_UNCONNECTED, the
following listen() succeeds. Then, the first connect() looks up
itself as a listener and puts skb into the queue with skb->sk itself.
As a result, the next accept() gets another FD of itself as 3, and
the first connect() finishes.
[pid 5060] listen(4, 0 <unfinished ...>
[pid 5060] <... listen resumed>) = 0
[pid 5060] accept(4, NULL, NULL <unfinished ...>
[pid 5060] <... accept resumed>) = 3
[pid 5059] <... connect resumed>) = 0
Then, accept4() is called but blocked, which causes the general protection
fault later.
[pid 5059] accept4(4, NULL, 0x20000400, SOCK_NONBLOCK <unfinished ...>
After that, another self-accept occurs by accept() and writev().
[pid 5060] accept(4, NULL, NULL <unfinished ...>
[pid 5061] writev(3, [{iov_base=...}] <unfinished ...>
[pid 5061] <... writev resumed>) = 99
[pid 5060] <... accept resumed>) = 6
Finally, the leader thread close()s all FDs. Since the three FDs
reference the same socket, nr_release() does the cleanup for it
three times, and the remaining accept4() causes the following fault.
[pid 5058] close(3) = 0
[pid 5058] close(4) = 0
[pid 5058] close(5) = -1 EBADF (Bad file descriptor)
[pid 5058] close(6) = 0
[pid 5058] <... exit_group resumed>) = ?
[ 83.456055][ T5059] general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
To avoid the issue, we need to return an error for connect() if
another connect() is in progress, as done in __inet_stream_connect().
[0]:
general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 0 PID: 5059 Comm: syz-executor.0 Not tainted
6.5.0-rc5-syzkaller-00194-gace0ab3a4b54 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:__lock_acquire+0x109/0x5de0 kernel/locking/lockdep.c:5012
Code: 45 85 c9 0f 84 cc 0e 00 00 44 8b 05 11 6e 23 0b 45 85 c0 0f 84 be 0d 00 00 48 ba 00 00 00 00 00 fc ff df 4c 89 d1 48 c1 e9 03 <80> 3c 11 00 0f 85 e8 40 00 00 49 81 3a a0 69 48 90 0f 84 96 0d 00
RSP: 0018:
ffffc90003d6f9e0 EFLAGS:
00010006
RAX:
ffff8880244c8000 RBX:
1ffff920007adf6c RCX:
0000000000000003
RDX:
dffffc0000000000 RSI:
0000000000000000 RDI:
0000000000000018
RBP:
0000000000000001 R08:
0000000000000001 R09:
0000000000000001
R10:
0000000000000018 R11:
0000000000000000 R12:
0000000000000000
R13:
0000000000000000 R14:
0000000000000000 R15:
0000000000000000
FS:
00007f51d519a6c0(0000) GS:
ffff8880b9800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f51d5158d58 CR3:
000000002943f000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
lock_acquire kernel/locking/lockdep.c:5761 [inline]
lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5726
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x3a/0x50 kernel/locking/spinlock.c:162
prepare_to_wait+0x47/0x380 kernel/sched/wait.c:269
nr_accept+0x20d/0x650 net/netrom/af_netrom.c:798
do_accept+0x3a6/0x570 net/socket.c:1872
__sys_accept4_file net/socket.c:1913 [inline]
__sys_accept4+0x99/0x120 net/socket.c:1943
__do_sys_accept4 net/socket.c:1954 [inline]
__se_sys_accept4 net/socket.c:1951 [inline]
__x64_sys_accept4+0x96/0x100 net/socket.c:1951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f51d447cae9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007f51d519a0c8 EFLAGS:
00000246 ORIG_RAX:
0000000000000120
RAX:
ffffffffffffffda RBX:
00007f51d459bf80 RCX:
00007f51d447cae9
RDX:
0000000020000400 RSI:
0000000000000000 RDI:
0000000000000004
RBP:
00007f51d44c847a R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000800 R11:
0000000000000246 R12:
0000000000000000
R13:
000000000000000b R14:
00007f51d459bf80 R15:
00007ffc25c34e48
</TASK>
Link: https://syzkaller.appspot.com/text?tag=CrashLog&x=152cdb63a80000
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+666c97e4686410e79649@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=
666c97e4686410e79649
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sat, 26 Aug 2023 02:06:00 +0000 (19:06 -0700)]
Merge branch 'pds_core-error-handling-fixes'
Shannon Nelson says:
====================
pds_core: error handling fixes
Some fixes for better handling of broken states.
====================
Link: https://lore.kernel.org/r/20230824161754.34264-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shannon Nelson [Thu, 24 Aug 2023 16:17:54 +0000 (09:17 -0700)]
pds_core: pass opcode to devcmd_wait
Don't rely on the PCI memory for the devcmd opcode because we
read a 0xff value if the PCI bus is broken, which can cause us
to report a bogus dev_cmd opcode later.
Fixes:
523847df1b37 ("pds_core: add devcmd device interfaces")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-6-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shannon Nelson [Thu, 24 Aug 2023 16:17:53 +0000 (09:17 -0700)]
pds_core: check for work queue before use
Add a check that the wq exists before queuing up work for a
failed devcmd, as the PF is responsible for health and the VF
doesn't have a wq.
Fixes:
c2dbb0904310 ("pds_core: health timer and workqueue")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-5-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shannon Nelson [Thu, 24 Aug 2023 16:17:52 +0000 (09:17 -0700)]
pds_core: no reset command for VF
The VF doesn't need to send a reset command, and in a PCI reset
scenario it might not have a valid IO space to write to anyway.
Fixes:
523847df1b37 ("pds_core: add devcmd device interfaces")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-4-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shannon Nelson [Thu, 24 Aug 2023 16:17:51 +0000 (09:17 -0700)]
pds_core: no health reporter in VF
Make sure the health reporter is set up before we use it in
our devlink health updates, especially since the VF doesn't
set up the health reporter.
Fixes:
25b450c05a49 ("pds_core: add devlink health facilities")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shannon Nelson [Thu, 24 Aug 2023 16:17:50 +0000 (09:17 -0700)]
pds_core: protect devlink callbacks from fw_down state
Don't access structs that have been cleared when in the fw_down
state and the various structs have been cleaned and are waiting
to recover. This caused a panic on rmmod when already in fw_down
and devlink_param_unregister() tried to check the parameters.
Fixes:
40ced8944536 ("pds_core: devlink params for enabling VIF support")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824161754.34264-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Budimir Markovic [Thu, 24 Aug 2023 08:49:05 +0000 (01:49 -0700)]
net/sched: sch_hfsc: Ensure inner classes have fsc curve
HFSC assumes that inner classes have an fsc curve, but it is currently
possible for classes without an fsc curve to become parents. This leads
to bugs including a use-after-free.
Don't allow non-root classes without HFSC_FSC to become parents.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Budimir Markovic <markovicbudimir@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230824084905.422-1-markovicbudimir@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Austin [Thu, 24 Aug 2023 16:46:57 +0000 (17:46 +0100)]
sfc: Check firmware supports Ethernet PTP filter
Not all firmware variants support RSS filters. Do not fail all PTP
functionality when raw ethernet PTP filters fail to insert.
Fixes:
e4616f64726b ("sfc: support PTP over Ethernet")
Signed-off-by: Alex Austin <alex.austin@amd.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Link: https://lore.kernel.org/r/20230824164657.42379-1-alex.austin@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 26 Aug 2023 01:48:42 +0000 (18:48 -0700)]
Merge branch 'fix-pfc-related-issues'
Suman Ghosh says:
====================
Fix PFC related issues
This patchset fixes multiple PFC related issues related to Octeon.
Patch #1: octeontx2-pf: Fix PFC TX scheduler free
Patch #2: octeontx2-af: CN10KB: fix PFC configuration
Patch #3: octeonxt2-pf: Fix backpressure config for multiple PFC
priorities to work simultaneously
====================
Link: https://lore.kernel.org/r/20230824081032.436432-1-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Suman Ghosh [Thu, 24 Aug 2023 08:10:32 +0000 (13:40 +0530)]
cteonxt2-pf: Fix backpressure config for multiple PFC priorities to work simultaneously
MAC (CGX or RPM) asserts backpressure at TL3 or TL2 node of the egress
hierarchical scheduler tree depending on link level config done. If
there are multiple PFC priorities enabled at a time and for all such
flows to backoff, each priority will have to assert backpressure at
different TL3/TL2 scheduler nodes and these flows will need to submit
egress pkts to these nodes.
Current PFC configuration has an issue where in only one backpressure
scheduler node is being allocated which is resulting in only one PFC
priority to work. This patch fixes this issue.
Fixes:
99c969a83d82 ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824081032.436432-4-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hariprasad Kelam [Thu, 24 Aug 2023 08:10:31 +0000 (13:40 +0530)]
octeontx2-af: CN10KB: fix PFC configuration
Suppose user has enabled pfc with prio 0,1 on a PF netdev(eth0)
dcb pfc set dev eth0 prio-pfc o:on 1:on
later user enabled pfc priorities 2 and 3 on the VF interface(eth1)
dcb pfc set dev eth1 prio-pfc 2:on 3:on
Instead of enabling pfc on all priorities (0..3), the driver only
enables on priorities 2,3. This patch corrects the issue by using
the proper CSR address.
Fixes:
b9d0fedc6234 ("octeontx2-af: cn10kb: Add RPM_USX MAC support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824081032.436432-3-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Suman Ghosh [Thu, 24 Aug 2023 08:10:30 +0000 (13:40 +0530)]
octeontx2-pf: Fix PFC TX scheduler free
During PFC TX schedulers free, flag TXSCHQ_FREE_ALL was being set
which caused free up all schedulers other than the PFC schedulers.
This patch fixes that to free only the PFC Tx schedulers.
Fixes:
99c969a83d82 ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824081032.436432-2-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David S. Miller [Fri, 25 Aug 2023 09:53:37 +0000 (10:53 +0100)]
Merge branch 'mlxsw-fixes'
Petr Machata says:
====================
mlxsw: Assorted fixes
This patchset contains several fixes for the mlxsw driver.
Patch #1 - Fixes buffer size in I2C mailbox buffer.
Patch #2 - Sets limitation of chunk size in I2C transaction.
Patch #3 - Fixes module label names based on MTCAP sensor counter
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Thu, 24 Aug 2023 13:43:10 +0000 (15:43 +0200)]
mlxsw: core_hwmon: Adjust module label names based on MTCAP sensor counter
Transceiver module temperature sensors are indexed after ASIC and
platform sensors. The current label printing method does not take this
into account and simply prints the index of the transceiver module
sensor.
On new systems that have platform sensors this results in incorrect
(shifted) transceiver module labels being printed:
$ sensors
[...]
front panel 002: +37.0°C (crit = +70.0°C, emerg = +75.0°C)
front panel 003: +47.0°C (crit = +70.0°C, emerg = +75.0°C)
[...]
Fix by taking the sensor count into account. After the fix:
$ sensors
[...]
front panel 001: +37.0°C (crit = +70.0°C, emerg = +75.0°C)
front panel 002: +47.0°C (crit = +70.0°C, emerg = +75.0°C)
[...]
Fixes:
a53779de6a0e ("mlxsw: core: Add QSFP module temperature label attribute to hwmon")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Thu, 24 Aug 2023 13:43:09 +0000 (15:43 +0200)]
mlxsw: i2c: Limit single transaction buffer size
Maximum size of buffer is obtained from underlying I2C adapter and in
case adapter allows I2C transaction buffer size greater than 100 bytes,
transaction will fail due to firmware limitation.
As a result driver will fail initialization.
Limit the maximum size of transaction buffer by 100 bytes to fit to
firmware.
Remove unnecessary calculation:
max_t(u16, MLXSW_I2C_BLK_DEF, quirk_size).
This condition can not happened.
Fixes:
3029a693beda ("mlxsw: i2c: Allow flexible setting of I2C transactions size")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Thu, 24 Aug 2023 13:43:08 +0000 (15:43 +0200)]
mlxsw: i2c: Fix chunk size setting in output mailbox buffer
The driver reads commands output from the output mailbox. If the size
of the output mailbox is not a multiple of the transaction /
block size, then the driver will not issue enough read transactions
to read the entire output, which can result in driver initialization
errors.
Fix by determining the number of transactions using DIV_ROUND_UP().
Fixes:
3029a693beda ("mlxsw: i2c: Allow flexible setting of I2C transactions size")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jinjie Ruan [Thu, 24 Aug 2023 06:43:36 +0000 (14:43 +0800)]
net: arcnet: Do not call kfree_skb() under local_irq_disable()
It is not allowed to call kfree_skb() from hardware interrupt
context or with hardware interrupts being disabled.
So replace kfree_skb() with dev_kfree_skb_irq() under
local_irq_disable(). Compile tested only.
Fixes:
05fcd31cc472 ("arcnet: add err_skb package for package status feedback")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ratheesh Kannoth [Thu, 24 Aug 2023 03:03:01 +0000 (08:33 +0530)]
octeontx2-pf: fix page_pool creation fail for rings > 32k
octeontx2 driver calls page_pool_create() during driver probe()
and fails if queue size > 32k. Page pool infra uses these buffers
as shock absorbers for burst traffic. These pages are pinned down
over time as working sets varies, due to the recycling nature
of page pool, given page pool (currently) don't have a shrinker
mechanism, the pages remain pinned down in ptr_ring.
Instead of clamping page_pool size to 32k at
most, limit it even more to 2k to avoid wasting memory.
This have been tested on octeontx2 CN10KA hardware.
TCP and UDP tests using iperf shows no performance regressions.
Fixes:
b2e3406a38f0 ("octeontx2-pf: Add support for page pool")
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller [Wed, 23 Aug 2023 15:18:14 +0000 (08:18 -0700)]
ice: avoid executing commands on other ports when driving sync
The ice hardware has a synchronization mechanism used to drive the
simultaneous application of commands on both PHY ports and the source timer
in the MAC.
When issuing a sync via ice_ptp_exec_tmr_cmd(), the hardware will
simultaneously apply the commands programmed for the main timer and each
PHY port. Neither the main timer command register, nor the PHY port command
registers auto clear on command execution.
During the execution of a timer command intended for a single port on E822
devices, such as those used to configure a PHY during link up, the driver
is not correctly clearing the previous commands.
This results in unintentionally executing the last programmed command on
the main timer and other PHY ports whenever performing reconfiguration on
E822 ports after link up. This results in unintended side effects on other
timers, depending on what command was previously programmed.
To fix this, the driver must ensure that the main timer and all other PHY
ports are properly initialized to perform no action.
The enumeration for timer commands does not include an enumeration value
for doing nothing. Introduce ICE_PTP_NOP for this purpose. When writing a
timer command to hardware, leave the command bits set to zero which
indicates that no operation should be performed on that port.
Modify ice_ptp_one_port_cmd() to always initialize all ports. For all ports
other than the one being configured, write their timer command register to
ICE_PTP_NOP. This ensures that no side effect happens on the timer command.
To fix this for the PHY ports, modify ice_ptp_one_port_cmd() to always
initialize all other ports to ICE_PTP_NOP. This ensures that no side
effects happen on the other ports.
Call ice_ptp_src_cmd() with a command value if ICE_PTP_NOP in
ice_sync_phy_timer_e822() and ice_start_phy_timer_e822().
With both of these changes, the driver should no longer execute a stale
command on the main timer or another PHY port when reconfiguring one of the
PHY ports after link up.
Fixes:
3a7496234d17 ("ice: implement basic E822 PTP support")
Signed-off-by: Siddaraju DH <siddaraju.dh@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Wed, 23 Aug 2023 13:41:02 +0000 (15:41 +0200)]
net: handle ARPHRD_PPP in dev_is_mac_header_xmit()
The goal is to support a bpf_redirect() from an ethernet device (ingress)
to a ppp device (egress).
The l2 header is added automatically by the ppp driver, thus the ethernet
header should be removed.
CC: stable@vger.kernel.org
Fixes:
27b29f63058d ("bpf: add bpf_redirect() helper")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Siwar Zitouni <siwar.zitouni@6wind.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Rameshbabu [Mon, 21 Aug 2023 23:05:54 +0000 (16:05 -0700)]
net/mlx5: Dynamic cyclecounter shift calculation for PTP free running clock
Use a dynamic calculation to determine the shift value for the internal
timer cyclecounter that will lead to the highest precision frequency
adjustments. Previously used a constant for the shift value assuming all
devices supported by the driver had a nominal frequency of 1GHz. However,
there are devices that operate at different frequencies. The previous shift
value constant would break the PHC functionality for those devices.
Reported-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Closes: https://lore.kernel.org/netdev/
20230815151507.
3028503-1-vadfed@meta.com/
Fixes:
6a4010927562 ("net/mlx5: Update cyclecounter shift value to improve ptp free running mode precision")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Tested-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230821230554.236210-1-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 24 Aug 2023 15:23:13 +0000 (08:23 -0700)]
Merge tag 'net-6.5-rc8' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wifi, can and netfilter.
Fixes to fixes:
- nf_tables:
- GC transaction race with abort path
- defer gc run if previous batch is still pending
Previous releases - regressions:
- ipv4: fix data-races around inet->inet_id
- phy: fix deadlocking in phy_error() invocation
- mdio: fix C45 read/write protocol
- ipvlan: fix a reference count leak warning in ipvlan_ns_exit()
- ice: fix NULL pointer deref during VF reset
- i40e: fix potential NULL pointer dereferencing of pf->vf in
i40e_sync_vsi_filters()
- tg3: use slab_build_skb() when needed
- mtk_eth_soc: fix NULL pointer on hw reset
Previous releases - always broken:
- core: validate veth and vxcan peer ifindexes
- sched: fix a qdisc modification with ambiguous command request
- devlink: add missing unregister linecard notification
- wifi: mac80211: limit reorder_buf_filtered to avoid UBSAN warning
- batman:
- do not get eth header before batadv_check_management_packet
- fix batadv_v_ogm_aggr_send memory leak
- bonding: fix macvlan over alb bond support
- mlxsw: set time stamp fields also when its type is MIRROR_UTC"
* tag 'net-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
selftests: bonding: add macvlan over bond testing
selftest: bond: add new topo bond_topo_2d1c.sh
bonding: fix macvlan over alb bond support
rtnetlink: Reject negative ifindexes in RTM_NEWLINK
netfilter: nf_tables: defer gc run if previous batch is still pending
netfilter: nf_tables: fix out of memory error handling
netfilter: nf_tables: use correct lock to protect gc_list
netfilter: nf_tables: GC transaction race with abort path
netfilter: nf_tables: flush pending destroy work before netlink notifier
netfilter: nf_tables: validate all pending tables
ibmveth: Use dcbf rather than dcbfl
i40e: fix potential NULL pointer dereferencing of pf->vf i40e_sync_vsi_filters()
net/sched: fix a qdisc modification with ambiguous command request
igc: Fix the typo in the PTM Control macro
batman-adv: Hold rtnl lock during MTU update via netlink
igb: Avoid starting unnecessary workqueues
can: raw: add missing refcount for memory leak fix
can: isotp: fix support for transmission of SF without flow control
bnx2x: new flag for track HW resource allocation
sfc: allocate a big enough SKB for loopback selftest packet
...
Paolo Abeni [Thu, 24 Aug 2023 08:33:22 +0000 (10:33 +0200)]
Merge tag 'nf-23-08-23' of ssh://gitolite./linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter updates for net
This PR contains nf_tables updates for your *net* tree.
First patch fixes table validation, I broke this in 6.4 when tracking
validation state per table, reported by Pablo, fixup from myself.
Second patch makes sure objects waiting for memory release have been
released, this was broken in 6.1, patch from Pablo Neira Ayuso.
Patch three is a fix-for-fix from previous PR: In case a transaction
gets aborted, gc sequence counter needs to be incremented so pending
gc requests are invalidated, from Pablo.
Same for patch 4: gc list needs to use gc list lock, not destroy lock,
also from Pablo.
Patch 5 fixes a UaF in a set backend, but this should only occur when
failslab is enabled for GFP_KERNEL allocations, broken since feature
was added in 5.6, from myself.
Patch 6 fixes a double-free bug that was also added via previous PR:
We must not schedule gc work if the previous batch is still queued.
netfilter pull request 2023-08-23
* tag 'nf-23-08-23' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: defer gc run if previous batch is still pending
netfilter: nf_tables: fix out of memory error handling
netfilter: nf_tables: use correct lock to protect gc_list
netfilter: nf_tables: GC transaction race with abort path
netfilter: nf_tables: flush pending destroy work before netlink notifier
netfilter: nf_tables: validate all pending tables
====================
Link: https://lore.kernel.org/r/20230823152711.15279-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 24 Aug 2023 08:07:16 +0000 (10:07 +0200)]
Merge branch 'fix-macvlan-over-alb-bond-support'
Hangbin Liu says:
====================
fix macvlan over alb bond support
Currently, the macvlan over alb bond is broken after commit
14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds").
Fix this and add relate tests.
====================
Link: https://lore.kernel.org/r/20230823071907.3027782-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hangbin Liu [Wed, 23 Aug 2023 07:19:06 +0000 (15:19 +0800)]
selftests: bonding: add macvlan over bond testing
Add a macvlan over bonding test with mode active-backup, balance-tlb
and balance-alb.
]# ./bond_macvlan.sh
TEST: active-backup: IPv4: client->server [ OK ]
TEST: active-backup: IPv6: client->server [ OK ]
TEST: active-backup: IPv4: client->macvlan_1 [ OK ]
TEST: active-backup: IPv6: client->macvlan_1 [ OK ]
TEST: active-backup: IPv4: client->macvlan_2 [ OK ]
TEST: active-backup: IPv6: client->macvlan_2 [ OK ]
TEST: active-backup: IPv4: macvlan_1->macvlan_2 [ OK ]
TEST: active-backup: IPv6: macvlan_1->macvlan_2 [ OK ]
TEST: active-backup: IPv4: server->client [ OK ]
TEST: active-backup: IPv6: server->client [ OK ]
TEST: active-backup: IPv4: macvlan_1->client [ OK ]
TEST: active-backup: IPv6: macvlan_1->client [ OK ]
TEST: active-backup: IPv4: macvlan_2->client [ OK ]
TEST: active-backup: IPv6: macvlan_2->client [ OK ]
TEST: active-backup: IPv4: macvlan_2->macvlan_2 [ OK ]
TEST: active-backup: IPv6: macvlan_2->macvlan_2 [ OK ]
[...]
TEST: balance-alb: IPv4: client->server [ OK ]
TEST: balance-alb: IPv6: client->server [ OK ]
TEST: balance-alb: IPv4: client->macvlan_1 [ OK ]
TEST: balance-alb: IPv6: client->macvlan_1 [ OK ]
TEST: balance-alb: IPv4: client->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: client->macvlan_2 [ OK ]
TEST: balance-alb: IPv4: macvlan_1->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: macvlan_1->macvlan_2 [ OK ]
TEST: balance-alb: IPv4: server->client [ OK ]
TEST: balance-alb: IPv6: server->client [ OK ]
TEST: balance-alb: IPv4: macvlan_1->client [ OK ]
TEST: balance-alb: IPv6: macvlan_1->client [ OK ]
TEST: balance-alb: IPv4: macvlan_2->client [ OK ]
TEST: balance-alb: IPv6: macvlan_2->client [ OK ]
TEST: balance-alb: IPv4: macvlan_2->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: macvlan_2->macvlan_2 [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hangbin Liu [Wed, 23 Aug 2023 07:19:05 +0000 (15:19 +0800)]
selftest: bond: add new topo bond_topo_2d1c.sh
Add a new testing topo bond_topo_2d1c.sh which is used more commonly.
Make bond_topo_3d1c.sh just source bond_topo_2d1c.sh and add the
extra link.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hangbin Liu [Wed, 23 Aug 2023 07:19:04 +0000 (15:19 +0800)]
bonding: fix macvlan over alb bond support
The commit
14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode
bonds") aims to enable the use of macvlans on top of rlb bond mode. However,
the current rlb bond mode only handles ARP packets to update remote neighbor
entries. This causes an issue when a macvlan is on top of the bond, and
remote devices send packets to the macvlan using the bond's MAC address
as the destination. After delivering the packets to the macvlan, the macvlan
will rejects them as the MAC address is incorrect. Consequently, this commit
makes macvlan over bond non-functional.
To address this problem, one potential solution is to check for the presence
of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev)
and return NULL in the rlb_arp_xmit() function. However, this approach
doesn't fully resolve the situation when a VLAN exists between the bond and
macvlan.
So let's just do a partial revert for commit
14af9963ba1e in rlb_arp_xmit().
As the comment said, Don't modify or load balance ARPs that do not originate
locally.
Fixes:
14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds")
Reported-by: susan.zheng@veritas.com
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=
2117816
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ido Schimmel [Wed, 23 Aug 2023 06:43:48 +0000 (09:43 +0300)]
rtnetlink: Reject negative ifindexes in RTM_NEWLINK
Negative ifindexes are illegal, but the kernel does not validate the
ifindex in the ancillary header of RTM_NEWLINK messages, resulting in
the kernel generating a warning [1] when such an ifindex is specified.
Fix by rejecting negative ifindexes.
[1]
WARNING: CPU: 0 PID: 5031 at net/core/dev.c:9593 dev_index_reserve+0x1a2/0x1c0 net/core/dev.c:9593
[...]
Call Trace:
<TASK>
register_netdevice+0x69a/0x1490 net/core/dev.c:10081
br_dev_newlink+0x27/0x110 net/bridge/br_netlink.c:1552
rtnl_newlink_create net/core/rtnetlink.c:3471 [inline]
__rtnl_newlink+0x115e/0x18c0 net/core/rtnetlink.c:3688
rtnl_newlink+0x67/0xa0 net/core/rtnetlink.c:3701
rtnetlink_rcv_msg+0x439/0xd30 net/core/rtnetlink.c:6427
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2545
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0x536/0x810 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x93c/0xe40 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:728 [inline]
sock_sendmsg+0xd9/0x180 net/socket.c:751
____sys_sendmsg+0x6ac/0x940 net/socket.c:2538
___sys_sendmsg+0x135/0x1d0 net/socket.c:2592
__sys_sendmsg+0x117/0x1e0 net/socket.c:2621
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes:
38f7b870d4a6 ("[RTNETLINK]: Link creation API")
Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230823064348.2252280-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Linus Torvalds [Wed, 23 Aug 2023 21:28:19 +0000 (14:28 -0700)]
Merge tag 'acpi-6.5-rc8' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Make an existing ACPI IRQ override quirk for PCSpecialist Elimina Pro
16 M work as intended (Hans de Goede)"
* tag 'acpi-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Fix IRQ override quirk for PCSpecialist Elimina Pro 16 M
Linus Torvalds [Wed, 23 Aug 2023 15:32:52 +0000 (08:32 -0700)]
Merge tag 'platform-drivers-x86-v6.5-5' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Final set of three small fixes for 6.5"
* tag 'platform-drivers-x86-v6.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/mellanox: Fix mlxbf-tmfifo not handling all virtio CONSOLE notifications
platform/x86: ideapad-laptop: Add support for new hotkeys found on ThinkBook 14s Yoga ITL
platform/x86: lenovo-ymc: Add Lenovo Yoga 7 14ACN6 to ec_trigger_quirk_dmi_table
Shih-Yi Chen [Mon, 21 Aug 2023 15:06:27 +0000 (11:06 -0400)]
platform/mellanox: Fix mlxbf-tmfifo not handling all virtio CONSOLE notifications
rshim console does not show all entries of dmesg.
Fixed by setting MLXBF_TM_TX_LWM_IRQ for every CONSOLE notification.
Signed-off-by: Shih-Yi Chen <shihyic@nvidia.com>
Reviewed-by: Liming Sung <limings@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20230821150627.26075-1-shihyic@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Florian Westphal [Tue, 22 Aug 2023 20:03:57 +0000 (22:03 +0200)]
netfilter: nf_tables: defer gc run if previous batch is still pending
Don't queue more gc work, else we may queue the same elements multiple
times.
If an element is flagged as dead, this can mean that either the previous
gc request was invalidated/discarded by a transaction or that the previous
request is still pending in the system work queue.
The latter will happen if the gc interval is set to a very low value,
e.g. 1ms, and system work queue is backlogged.
The sets refcount is 1 if no previous gc requeusts are queued, so add
a helper for this and skip gc run if old requests are pending.
Add a helper for this and skip the gc run in this case.
Fixes:
f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Tue, 22 Aug 2023 17:49:52 +0000 (19:49 +0200)]
netfilter: nf_tables: fix out of memory error handling
Several instances of pipapo_resize() don't propagate allocation failures,
this causes a crash when fault injection is enabled for gfp_kernel slabs.
Fixes:
3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Pablo Neira Ayuso [Mon, 21 Aug 2023 12:33:32 +0000 (14:33 +0200)]
netfilter: nf_tables: use correct lock to protect gc_list
Use nf_tables_gc_list_lock spinlock, not nf_tables_destroy_list_lock to
protect the gc list.
Fixes:
5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Pablo Neira Ayuso [Thu, 17 Aug 2023 23:13:52 +0000 (01:13 +0200)]
netfilter: nf_tables: GC transaction race with abort path
Abort path is missing a synchronization point with GC transactions. Add
GC sequence number hence any GC transaction losing race will be
discarded.
Fixes:
5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Pablo Neira Ayuso [Thu, 17 Aug 2023 23:13:31 +0000 (01:13 +0200)]
netfilter: nf_tables: flush pending destroy work before netlink notifier
Destroy work waits for the RCU grace period then it releases the objects
with no mutex held. All releases objects follow this path for
transactions, therefore, order is guaranteed and references to top-level
objects in the hierarchy remain valid.
However, netlink notifier might interfer with pending destroy work.
rcu_barrier() is not correct because objects are not release via RCU
callback. Flush destroy work before releasing objects from netlink
notifier path.
Fixes:
d4bc8271db21 ("netfilter: nf_tables: netlink notifier might race to release objects")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Florian Westphal [Thu, 17 Aug 2023 18:28:32 +0000 (20:28 +0200)]
netfilter: nf_tables: validate all pending tables
We have to validate all tables in the transaction that are in
VALIDATE_DO state, the blamed commit below did not move the break
statement to its right location so we only validate one table.
Moreover, we can't init table->validate to _SKIP when a table object
is allocated.
If we do, then if a transcaction creates a new table and then
fails the transaction, nfnetlink will loop and nft will hang until
user cancels the command.
Add back the pernet state as a place to stash the last state encountered.
This is either _DO (we hit an error during commit validation) or _SKIP
(transaction passed all checks).
Fixes:
00c320f9b755 ("netfilter: nf_tables: make validation state per table")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Michael Ellerman [Wed, 23 Aug 2023 04:51:39 +0000 (14:51 +1000)]
ibmveth: Use dcbf rather than dcbfl
When building for power4, newer binutils don't recognise the "dcbfl"
extended mnemonic.
dcbfl RA, RB is equivalent to dcbf RA, RB, 1.
Switch to "dcbf" to avoid the build error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrii Staikov [Tue, 22 Aug 2023 22:16:53 +0000 (15:16 -0700)]
i40e: fix potential NULL pointer dereferencing of pf->vf i40e_sync_vsi_filters()
Add check for pf->vf not being NULL before dereferencing
pf->vf[vsi->vf_id] in updating VSI filter sync.
Add a similar check before dereferencing !pf->vf[vsi->vf_id].trusted
in the condition for clearing promisc mode bit.
Fixes:
c87c938f62d8 ("i40e: Add VF VLAN pruning")
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim [Tue, 22 Aug 2023 10:12:31 +0000 (06:12 -0400)]
net/sched: fix a qdisc modification with ambiguous command request
When replacing an existing root qdisc, with one that is of the same kind, the
request boils down to essentially a parameterization change i.e not one that
requires allocation and grafting of a new qdisc. syzbot was able to create a
scenario which resulted in a taprio qdisc replacing an existing taprio qdisc
with a combination of NLM_F_CREATE, NLM_F_REPLACE and NLM_F_EXCL leading to
create and graft scenario.
The fix ensures that only when the qdisc kinds are different that we should
allow a create and graft, otherwise it goes into the "change" codepath.
While at it, fix the code and comments to improve readability.
While syzbot was able to create the issue, it did not zone on the root cause.
Analysis from Vladimir Oltean <vladimir.oltean@nxp.com> helped narrow it down.
v1->V2 changes:
- remove "inline" function definition (Vladmir)
- remove extrenous braces in branches (Vladmir)
- change inline function names (Pedro)
- Run tdc tests (Victor)
v2->v3 changes:
- dont break else/if (Simon)
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+a3618a167af2021433cd@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/
20230816225759.g25x76kmgzya2gei@skbuf/T/
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sasha Neftin [Mon, 21 Aug 2023 17:17:21 +0000 (10:17 -0700)]
igc: Fix the typo in the PTM Control macro
The IGC_PTM_CTRL_SHRT_CYC defines the time between two consecutive PTM
requests. The bit resolution of this field is six bits. That bit five was
missing in the mask. This patch comes to correct the typo in the
IGC_PTM_CTRL_SHRT_CYC macro.
Fixes:
a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20230821171721.2203572-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sven Eckelmann [Mon, 21 Aug 2023 19:48:48 +0000 (21:48 +0200)]
batman-adv: Hold rtnl lock during MTU update via netlink
The automatic recalculation of the maximum allowed MTU is usually triggered
by code sections which are already rtnl lock protected by callers outside
of batman-adv. But when the fragmentation setting is changed via
batman-adv's own batadv genl family, then the rtnl lock is not yet taken.
But dev_set_mtu requires that the caller holds the rtnl lock because it
uses netdevice notifiers. And this code will then fail the check for this
lock:
RTNL: assertion failed at net/core/dev.c (1953)
Cc: stable@vger.kernel.org
Reported-by: syzbot+f8812454d9b3ac00d282@syzkaller.appspotmail.com
Fixes:
c6a953cce8d0 ("batman-adv: Trigger events for auto adjusted MTU")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821-batadv-missing-mtu-rtnl-lock-v1-1-1c5a7bfe861e@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alessio Igor Bogani [Mon, 21 Aug 2023 17:19:27 +0000 (10:19 -0700)]
igb: Avoid starting unnecessary workqueues
If ptp_clock_register() fails or CONFIG_PTP isn't enabled, avoid starting
PTP related workqueues.
In this way we can fix this:
BUG: unable to handle page fault for address:
ffffc9000440b6f8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD
100000067 P4D
100000067 PUD
1001e0067 PMD
107dc5067 PTE 0
Oops: 0000 [#1] PREEMPT SMP
[...]
Workqueue: events igb_ptp_overflow_check
RIP: 0010:igb_rd32+0x1f/0x60
[...]
Call Trace:
igb_ptp_read_82580+0x20/0x50
timecounter_read+0x15/0x60
igb_ptp_overflow_check+0x1a/0x50
process_one_work+0x1cb/0x3c0
worker_thread+0x53/0x3f0
? rescuer_thread+0x370/0x370
kthread+0x142/0x160
? kthread_associate_blkcg+0xc0/0xc0
ret_from_fork+0x1f/0x30
Fixes:
1f6e8178d685 ("igb: Prevent dropped Tx timestamps via work items and interrupts.")
Fixes:
d339b1331616 ("igb: add PTP Hardware Clock code")
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821171927.2203644-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 23 Aug 2023 00:22:32 +0000 (17:22 -0700)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-08-21 (ice)
This series contains updates to ice driver only.
Jesse fixes an issue on calculating buffer size.
Petr Oros reverts a commit that does not fully resolve VF reset issues
and implements one that provides a fuller fix.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix NULL pointer deref during VF reset
Revert "ice: Fix ice VF reset during iavf initialization"
ice: fix receive buffer size miscalculation
====================
Link: https://lore.kernel.org/r/20230821171633.2203505-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 23 Aug 2023 00:18:56 +0000 (17:18 -0700)]
Merge branch 'can-fixes-for-6-5-rc7'
Oliver Hartkopp says:
====================
CAN fixes for 6.5-rc7
The isotp fix removes an unnecessary check which leads to delays and/or
a wrong error notification.
The fix for the CAN_RAW socket solves the last issue that has been
introduced with commit
ee8b94c8510c ("can: raw: fix receiver memory leak")
in this upstream cycle (detected by Eric Dumazet).
====================
Link: https://lore.kernel.org/r/20230821144547.6658-1-socketcan@hartkopp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oliver Hartkopp [Mon, 21 Aug 2023 14:45:47 +0000 (16:45 +0200)]
can: raw: add missing refcount for memory leak fix
Commit
ee8b94c8510c ("can: raw: fix receiver memory leak") introduced
a new reference to the CAN netdevice that has assigned CAN filters.
But this new ro->dev reference did not maintain its own refcount which
lead to another KASAN use-after-free splat found by Eric Dumazet.
This patch ensures a proper refcount for the CAN nedevice.
Fixes:
ee8b94c8510c ("can: raw: fix receiver memory leak")
Reported-by: Eric Dumazet <edumazet@google.com>
Cc: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20230821144547.6658-3-socketcan@hartkopp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oliver Hartkopp [Mon, 21 Aug 2023 14:45:46 +0000 (16:45 +0200)]
can: isotp: fix support for transmission of SF without flow control
The original implementation had a very simple handling for single frame
transmissions as it just sent the single frame without a timeout handling.
With the new echo frame handling the echo frame was also introduced for
single frames but the former exception ('simple without timers') has been
maintained by accident. This leads to a 1 second timeout when closing the
socket and to an -ECOMM error when CAN_ISOTP_WAIT_TX_DONE is selected.
As the echo handling is always active (also for single frames) remove the
wrong extra condition for single frames.
Fixes:
9f39d36530e5 ("can: isotp: add support for transmission without flow control")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20230821144547.6658-2-socketcan@hartkopp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thinh Tran [Fri, 18 Aug 2023 16:14:40 +0000 (11:14 -0500)]
bnx2x: new flag for track HW resource allocation
While injecting PCIe errors to the upstream PCIe switch of
a BCM57810 NIC, system hangs/crashes were observed.
After several calls to bnx2x_tx_timout() complete,
bnx2x_nic_unload() is called to free up HW resources
and bnx2x_napi_disable() is called to release NAPI objects.
Later, when the EEH driver calls bnx2x_io_slot_reset() to
complete the recovery process, bnx2x attempts to disable
NAPI again by calling bnx2x_napi_disable() and freeing
resources which have already been freed, resulting in a
hang or crash.
Introduce a new flag to track the HW resource and NAPI
allocation state, refactor duplicated code into a single
function, check page pool allocation status before freeing,
and reduces debug output when a TX timeout event occurs.
Reviewed-by: Manish Chopra <manishc@marvell.com>
Tested-by: Abdul Haleem <abdhalee@in.ibm.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Venkata Sai Duggi <venkata.sai.duggi@ibm.com>
Signed-off-by: Thinh Tran <thinhtr@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20230818161443.708785-2-thinhtr@linux.vnet.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Tue, 22 Aug 2023 18:16:23 +0000 (11:16 -0700)]
Merge tag 'devicetree-fixes-for-6.5-2' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix DT node refcount when creating platform devices
- Fix deadlock in changeset code due to printing with devtree_lock held
- Fix unittest EXPECT strings for parse_phandle_with_args_map() test
- Fix IMA kexec memblock freeing
* tag 'devicetree-fixes-for-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/platform: increase refcount of fwnode
of: dynamic: Refactor action prints to not use "%pOF" inside devtree_lock
of: unittest: Fix EXPECT for parse_phandle_with_args_map() test
mm,ima,kexec,of: use memblock_free_late from ima_free_kexec_buffer
Edward Cree [Mon, 21 Aug 2023 18:01:53 +0000 (19:01 +0100)]
sfc: allocate a big enough SKB for loopback selftest packet
Cited commits passed a size to alloc_skb that was only big enough for
the actual packet contents, but the following skb_put + memcpy writes
the whole struct efx_loopback_payload including leading and trailing
padding bytes (which are then stripped off with skb_pull/skb_trim).
This could cause an skb_over_panic, although in practice we get saved
by kmalloc_size_roundup.
Pass the entire size we use, instead of the size of the final packet.
Reported-by: Andy Moreton <andy.moreton@amd.com>
Fixes:
cf60ed469629 ("sfc: use padding to fix alignment in loopback test")
Fixes:
30c24dd87f3f ("sfc: siena: use padding to fix alignment in loopback test")
Fixes:
1186c6b31ee1 ("sfc: falcon: use padding to fix alignment in loopback test")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821180153.18652-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 22 Aug 2023 18:04:01 +0000 (11:04 -0700)]
Merge tag 'wireless-2023-08-22' of git://git./linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Two fixes:
- reorder buffer filter checks can cause bad shift/UBSAN
warning with newer HW, avoid the check (mac80211)
- add Kconfig dependency for iwlwifi for PTP clock usage
* tag 'wireless-2023-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: limit reorder_buf_filtered to avoid UBSAN warning
wifi: iwlwifi: mvm: add dependency for PTP clock
====================
Link: https://lore.kernel.org/r/20230822124206.43926-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marek Behún [Mon, 21 Aug 2023 12:14:53 +0000 (14:14 +0200)]
leds: trigger: netdev: rename 'hw_control' sysfs entry to 'offloaded'
Commit
b655892ffd6d ("leds: trigger: netdev: expose hw_control status
via sysfs") exposed to sysfs the flag that tells whether the LED trigger
is offloaded to hardware, under the name "hw_control", since that is the
name under which this setting is called in the code.
Everywhere else in kernel when some work that is normally done in
software can be made to be done by hardware instead, we use the word
"offloading" to describe this, e.g. "LED blinking is offloaded to
hardware".
Normally renaming sysfs entries is a no-go because of backwards
compatibility. But since this patch was not yet released in a stable
kernel, I think it is still possible to rename it, if there is
consensus.
Fixes:
b655892ffd6d ("leds: trigger: netdev: expose hw_control status via sysfs")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230821121453.30203-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Golle [Mon, 21 Aug 2023 16:12:44 +0000 (17:12 +0100)]
net: ethernet: mtk_eth_soc: fix NULL pointer on hw reset
When a hardware reset is triggered on devices not initializing WED the
calls to mtk_wed_fe_reset and mtk_wed_fe_reset_complete dereference a
pointer on uninitialized stack memory.
Break out of both functions in case a hw_list entry is 0.
Fixes:
08a764a7c51b ("net: ethernet: mtk_wed: add reset/reset_complete callbacks")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/5465c1609b464cc7407ae1530c40821dcdf9d3e6.1692634266.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Tue, 22 Aug 2023 17:50:17 +0000 (10:50 -0700)]
Merge tag 'nfs-for-6.5-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
- fix a use after free in nfs_direct_join_group() (Cc: stable)
- fix sysfs server name memory leak
- fix lock recovery hang in NFSv4.0
- fix page free in the error path for nfs42_proc_getxattr() and
__nfs4_get_acl_uncached()
- SUNRPC/rdma: fix receive buffer dma-mapping after a server disconnect
* tag 'nfs-for-6.5-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
xprtrdma: Remap Receive buffers after a reconnect
NFSv4: fix out path in __nfs4_get_acl_uncached
NFSv4.2: fix error handling in nfs42_proc_getxattr
NFS: Fix sysfs server name memory leak
NFS: Fix a use after free in nfs_direct_join_group()
NFSv4: Fix dropped lock for racing OPEN and delegation return
Linus Torvalds [Tue, 22 Aug 2023 17:38:29 +0000 (10:38 -0700)]
Merge tag 'selinux-pr-
20230821' of git://git./linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A small fix for a potential problem when cleaning up after a failed
SELinux policy load (list next pointer not being properly initialized
to NULL early enough)"
* tag 'selinux-pr-
20230821' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: set next pointer before attaching to list
Kees Cook [Fri, 18 Aug 2023 17:54:21 +0000 (10:54 -0700)]
tg3: Use slab_build_skb() when needed
The tg3 driver will use kmalloc() under some conditions. Check the
frag_size and use slab_build_skb() when frag_size is 0. Silences
the warning introduced by commit
ce098da1497c ("skbuff: Introduce
slab_build_skb()"):
Use slab_build_skb() instead
...
tg3_poll_work+0x638/0xf90 [tg3]
Fixes:
ce098da1497c ("skbuff: Introduce slab_build_skb()")
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Closes: https://lore.kernel.org/all/
1bd4cb9c-4eb8-3bdb-3e05-
8689817242d1@proxmox.com
Cc: Siva Reddy Kallam <siva.kallam@broadcom.com>
Cc: Prashant Sreedharan <prashant@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230818175417.never.273-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu [Thu, 17 Aug 2023 08:24:59 +0000 (16:24 +0800)]
selftests: bonding: do not set port down before adding to bond
Before adding a port to bond, it need to be set down first. In the
lacpdu test the author set the port down specifically. But commit
a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up")
changed the operation order, the kernel will set the port down _after_
adding to bond. So all the ports will be down at last and the test failed.
In fact, the veth interfaces are already inactive when added. This
means there's no need to set them down again before adding to the bond.
Let's just remove the link down operation.
Fixes:
a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up")
Reported-by: Zhengchao Shao <shaozhengchao@huawei.com>
Closes: https://lore.kernel.org/netdev/
a0ef07c7-91b0-94bd-240d-
944a330fcabd@huawei.com/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230817082459.1685972-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Peng Fan [Mon, 21 Aug 2023 02:39:28 +0000 (10:39 +0800)]
of/platform: increase refcount of fwnode
commit
0f8e5651095b
("of/platform: Propagate firmware node by calling device_set_node()")
use of_fwnode_handle to replace of_node_get, which introduces a side
effect that the refcount is not increased. Then the out of tree
jailhouse hypervisor enable/disable test will trigger kernel dump in
of_overlay_remove, with the following sequence
"
of_changeset_revert(&overlay_changeset);
of_changeset_destroy(&overlay_changeset);
of_overlay_remove(&overlay_id);
"
So increase the refcount to avoid issues.
This patch also release the refcount when releasing amba device to avoid
refcount leakage.
Fixes:
0f8e5651095b ("of/platform: Propagate firmware node by calling device_set_node()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230821023928.3324283-2-peng.fan@oss.nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>
Petr Oros [Fri, 11 Aug 2023 08:07:02 +0000 (10:07 +0200)]
ice: Fix NULL pointer deref during VF reset
During stress test with attaching and detaching VF from KVM and
simultaneously changing VFs spoofcheck and trust there was a
NULL pointer dereference in ice_reset_vf that VF's VSI is null.
More than one instance of ice_reset_vf() can be running at a given
time. When we rebuild the VSI in ice_reset_vf, another reset can be
triaged from ice_service_task. In this case we can access the currently
uninitialized VSI and cause panic. The window for this racing condition
has been around for a long time but it's much worse after commit
227bf4500aaa ("ice: move VSI delete outside deconfig") because
the reset runs faster. ice_reset_vf() using vf->cfg_lock and when
we move this lock before accessing to the VF VSI, we can fix
BUG for all cases.
Panic occurs sometimes in ice_vsi_is_rx_queue_active() and sometimes
in ice_vsi_stop_all_rx_rings()
With our reproducer, we can hit BUG:
~8h before commit
227bf4500aaa ("ice: move VSI delete outside deconfig").
~20m after commit
227bf4500aaa ("ice: move VSI delete outside deconfig").
After this fix we are not able to reproduce it after ~48h
There was commit
cf90b74341ee ("ice: Fix call trace with null VSI during
VF reset") which also tried to fix this issue, but it was only
partially resolved and the bug still exists.
[ 6420.658415] BUG: kernel NULL pointer dereference, address:
0000000000000000
[ 6420.665382] #PF: supervisor read access in kernel mode
[ 6420.670521] #PF: error_code(0x0000) - not-present page
[ 6420.675659] PGD 0
[ 6420.677679] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 6420.682038] CPU: 53 PID: 326472 Comm: kworker/53:0 Kdump: loaded Not tainted 5.14.0-317.el9.x86_64 #1
[ 6420.691250] Hardware name: Dell Inc. PowerEdge R750/04V528, BIOS 1.6.5 04/15/2022
[ 6420.698729] Workqueue: ice ice_service_task [ice]
[ 6420.703462] RIP: 0010:ice_vsi_is_rx_queue_active+0x2d/0x60 [ice]
[ 6420.705860] ice 0000:ca:00.0: VF 0 is now untrusted
[ 6420.709494] Code: 00 00 66 83 bf 76 04 00 00 00 48 8b 77 10 74 3e 31 c0 eb 0f 0f b7 97 76 04 00 00 48 83 c0 01 39 c2 7e 2b 48 8b 97 68 04 00 00 <0f> b7 0c 42 48 8b 96 20 13 00 00 48 8d 94 8a 00 00 12 00 8b 12 83
[ 6420.714426] ice 0000:ca:00.0 ens7f0: Setting MAC 22:22:22:22:22:00 on VF 0. VF driver will be reinitialized
[ 6420.733120] RSP: 0018:
ff778d2ff383fdd8 EFLAGS:
00010246
[ 6420.733123] RAX:
0000000000000000 RBX:
ff2acf1916294000 RCX:
0000000000000000
[ 6420.733125] RDX:
0000000000000000 RSI:
ff2acf1f2c6401a0 RDI:
ff2acf1a27301828
[ 6420.762346] RBP:
ff2acf1a27301828 R08:
0000000000000010 R09:
0000000000001000
[ 6420.769476] R10:
ff2acf1916286000 R11:
00000000019eba3f R12:
ff2acf19066460d0
[ 6420.776611] R13:
ff2acf1f2c6401a0 R14:
ff2acf1f2c6401a0 R15:
00000000ffffffff
[ 6420.783742] FS:
0000000000000000(0000) GS:
ff2acf28ffa80000(0000) knlGS:
0000000000000000
[ 6420.791829] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 6420.797575] CR2:
0000000000000000 CR3:
00000016ad410003 CR4:
0000000000773ee0
[ 6420.804708] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 6420.811034] vfio-pci 0000:ca:01.0: enabling device (0000 -> 0002)
[ 6420.811840] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 6420.811841] PKRU:
55555554
[ 6420.811842] Call Trace:
[ 6420.811843] <TASK>
[ 6420.811844] ice_reset_vf+0x9a/0x450 [ice]
[ 6420.811876] ice_process_vflr_event+0x8f/0xc0 [ice]
[ 6420.841343] ice_service_task+0x23b/0x600 [ice]
[ 6420.845884] ? __schedule+0x212/0x550
[ 6420.849550] process_one_work+0x1e2/0x3b0
[ 6420.853563] ? rescuer_thread+0x390/0x390
[ 6420.857577] worker_thread+0x50/0x3a0
[ 6420.861242] ? rescuer_thread+0x390/0x390
[ 6420.865253] kthread+0xdd/0x100
[ 6420.868400] ? kthread_complete_and_exit+0x20/0x20
[ 6420.873194] ret_from_fork+0x1f/0x30
[ 6420.876774] </TASK>
[ 6420.878967] Modules linked in: vfio_pci vfio_pci_core vfio_iommu_type1 vfio iavf vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_counter nf_tables bridge stp llc sctp ip6_udp_tunnel udp_tunnel nfp tls nfnetlink bluetooth mlx4_en mlx4_core rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill sunrpc intel_rapl_msr intel_rapl_common i10nm_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp irdma kvm_intel i40e kvm iTCO_wdt dcdbas ib_uverbs irqbypass iTCO_vendor_support mgag200 mei_me ib_core dell_smbios isst_if_mmio isst_if_mbox_pci rapl i2c_algo_bit drm_shmem_helper intel_cstate drm_kms_helper syscopyarea sysfillrect isst_if_common sysimgblt intel_uncore fb_sys_fops dell_wmi_descriptor wmi_bmof intel_vsec mei i2c_i801 acpi_ipmi ipmi_si i2c_smbus ipmi_devintf intel_pch_thermal acpi_power_meter pcspk
r
Fixes:
efe41860008e ("ice: Fix memory corruption in VF driver")
Fixes:
f23df5220d2b ("ice: Fix spurious interrupt during removal of trusted VF")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Petr Oros [Fri, 11 Aug 2023 08:07:01 +0000 (10:07 +0200)]
Revert "ice: Fix ice VF reset during iavf initialization"
This reverts commit
7255355a0636b4eff08d5e8139c77d98f151c4fc.
After this commit we are not able to attach VF to VM:
virsh attach-interface v0 hostdev --managed 0000:41:01.0 --mac 52:52:52:52:52:52
error: Failed to attach interface
error: Cannot set interface MAC to 52:52:52:52:52:52 for ifname enp65s0f0np0 vf 0: Resource temporarily unavailable
ice_check_vf_ready_for_cfg() already contain waiting for reset.
New condition in ice_check_vf_ready_for_reset() causing only problems.
Fixes:
7255355a0636 ("ice: Fix ice VF reset during iavf initialization")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jesse Brandeburg [Thu, 10 Aug 2023 23:51:10 +0000 (16:51 -0700)]
ice: fix receive buffer size miscalculation
The driver is misconfiguring the hardware for some values of MTU such that
it could use multiple descriptors to receive a packet when it could have
simply used one.
Change the driver to use a round-up instead of the result of a shift, as
the shift can truncate the lower bits of the size, and result in the
problem noted above. It also aligns this driver with similar code in i40e.
The insidiousness of this problem is that everything works with the wrong
size, it's just not working as well as it could, as some MTU sizes end up
using two or more descriptors, and there is no way to tell that is
happening without looking at ice_trace or a bus analyzer.
Fixes:
efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Rob Herring [Fri, 18 Aug 2023 20:40:57 +0000 (15:40 -0500)]
of: dynamic: Refactor action prints to not use "%pOF" inside devtree_lock
While originally it was fine to format strings using "%pOF" while
holding devtree_lock, this now causes a deadlock. Lockdep reports:
of_get_parent from of_fwnode_get_parent+0x18/0x24
^^^^^^^^^^^^^
of_fwnode_get_parent from fwnode_count_parents+0xc/0x28
fwnode_count_parents from fwnode_full_name_string+0x18/0xac
fwnode_full_name_string from device_node_string+0x1a0/0x404
device_node_string from pointer+0x3c0/0x534
pointer from vsnprintf+0x248/0x36c
vsnprintf from vprintk_store+0x130/0x3b4
Fix this by moving the printing in __of_changeset_entry_apply() outside
the lock. As the only difference in the multiple prints is the action
name, use the existing "action_names" to refactor the prints into a
single print.
Fixes:
a92eb7621b9fb2c2 ("lib/vsprintf: Make use of fwnode API to obtain node names and separators")
Cc: stable@vger.kernel.org
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-2-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Rob Herring [Fri, 18 Aug 2023 20:40:56 +0000 (15:40 -0500)]
of: unittest: Fix EXPECT for parse_phandle_with_args_map() test
Commit
12e17243d8a1 ("of: base: improve error msg in
of_phandle_iterator_next()") added printing of the phandle value on
error, but failed to update the unittest.
Fixes:
12e17243d8a1 ("of: base: improve error msg in of_phandle_iterator_next()")
Cc: stable@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-1-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
André Apitzsch [Sat, 19 Aug 2023 07:12:15 +0000 (09:12 +0200)]
platform/x86: ideapad-laptop: Add support for new hotkeys found on ThinkBook 14s Yoga ITL
The Lenovo Thinkbook 14s Yoga ITL has 4 new symbols/shortcuts on their
F9-F11 and PrtSc keys:
F9: Has a symbol of a head with a headset, the manual says "Service key"
F10: Has a symbol of a telephone horn which has been picked up from the
receiver, the manual says: "Answer incoming calls"
F11: Has a symbol of a telephone horn which is resting on the receiver,
the manual says: "Reject incoming calls"
PrtSc: Has a symbol of a siccor and a dashed ellipse, the manual says:
"Open the Windows 'Snipping' Tool app"
This commit adds support for these 4 new hkey events.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20230819-lenovo_keys-v1-1-9d34eac88e0a@apitzsch.eu
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Swapnil Devesh [Fri, 18 Aug 2023 12:39:47 +0000 (18:09 +0530)]
platform/x86: lenovo-ymc: Add Lenovo Yoga 7 14ACN6 to ec_trigger_quirk_dmi_table
This adds my laptop Lenovo Yoga 7 14ACN6, with Product Name: 82N7
(from `dmidecode -t1 | grep "Product Name"`) to
the ec_trigger_quirk_dmi_table, have tested that this is required
for the YMC driver to work correctly on this model.
Signed-off-by: Swapnil Devesh <me@sidevesh.com>
Reviewed-by: Gergő Köteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/18a08a8b173.895ef3b250414.1213194126082324071@sidevesh.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Mon, 21 Aug 2023 09:09:27 +0000 (11:09 +0200)]
ACPI: resource: Fix IRQ override quirk for PCSpecialist Elimina Pro 16 M
It turns out that some PCSpecialist Elimina Pro 16 M models
have "GM6BGEQ" as DMI product-name instead of "Elimina Pro 16 M",
causing the existing DMI quirk to not work on these models.
The DMI board-name is always "GM6BGEQ", so match on that instead.
Fixes:
56fec0051a69 ("ACPI: resource: Add IRQ override quirk for PCSpecialist Elimina Pro 16 M")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394#c36
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ping-Ke Shih [Fri, 18 Aug 2023 01:40:04 +0000 (09:40 +0800)]
wifi: mac80211: limit reorder_buf_filtered to avoid UBSAN warning
The commit
06470f7468c8 ("mac80211: add API to allow filtering frames in BA sessions")
added reorder_buf_filtered to mark frames filtered by firmware, and it
can only work correctly if hw.max_rx_aggregation_subframes <= 64 since
it stores the bitmap in a u64 variable.
However, new HE or EHT devices can support BlockAck number up to 256 or
1024, and then using a higher subframe index leads UBSAN warning:
UBSAN: shift-out-of-bounds in net/mac80211/rx.c:1129:39
shift exponent 215 is too large for 64-bit type 'long long unsigned int'
Call Trace:
<IRQ>
dump_stack_lvl+0x48/0x70
dump_stack+0x10/0x20
__ubsan_handle_shift_out_of_bounds+0x1ac/0x360
ieee80211_release_reorder_frame.constprop.0.cold+0x64/0x69 [mac80211]
ieee80211_sta_reorder_release+0x9c/0x400 [mac80211]
ieee80211_prepare_and_rx_handle+0x1234/0x1420 [mac80211]
ieee80211_rx_list+0xaef/0xf60 [mac80211]
ieee80211_rx_napi+0x53/0xd0 [mac80211]
Since only old hardware that supports <=64 BlockAck uses
ieee80211_mark_rx_ba_filtered_frames(), limit the use as it is, so add a
WARN_ONCE() and comment to note to avoid using this function if hardware
capability is not suitable.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20230818014004.16177-1-pkshih@realtek.com
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sabrina Dubroca [Fri, 18 Aug 2023 20:57:49 +0000 (22:57 +0200)]
MAINTAINERS: add entry for macsec
Jakub asked if I'd be willing to be the maintainer of the macsec code
and review the driver code adding macsec offload, so let's add the
corresponding entry.
The keyword lines are meant to catch selftests and patches adding HW
offload support to other drivers.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 21 Aug 2023 05:02:21 +0000 (07:02 +0200)]
Merge tag 'v6.5-p3' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a regression in the caam driver and af_alg"
* tag 'v6.5-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: fix uninit-value in af_alg_free_resources
Revert "crypto: caam - adjust RNG timing to support more devices"
Linus Torvalds [Mon, 21 Aug 2023 04:11:33 +0000 (06:11 +0200)]
mm: avoid 'might_sleep()' in get_mmap_lock_carefully()
This might_sleep() goes back a long time: it was originally introduced
way back when by commit
010060741ad3 ("x86: add might_sleep() to
do_page_fault()"), and made it into the generic VM code when the x86
fault path got re-organized and generalized in commit
c2508ec5a58d ("mm:
introduce new 'lock_mm_and_find_vma()' page fault helper").
However, it turns out that the placement of that might_sleep() has
always been rather questionable simply because it's not only a debug
statement to warn about sleeping in contexts that shouldn't sleep (which
was the original reason for adding it), but it also implies a voluntary
scheduling point.
That, in turn, is less than desirable for two reasons:
(a) it ends up being done after we successfully got the mmap_lock, so
just as we got the lock we will now eagerly schedule away and
increase lock contention
and
(b) this is all very possibly part of the "oops, things went horribly
wrong" path and we just haven't figured that out yet
After all, the whole _reason_ for having that get_mmap_lock_carefully()
rather than just doing the obvious mmap_read_lock() is because this code
wants to deal somewhat gracefully with potential kernel wild pointer
bugs.
So then a voluntary scheduling point here is simply not a good idea.
We could certainly turn the 'might_sleep()' into a '__might_sleep()' and
make it be just the debug check that it was originally intended to be.
But even that seems questionable in the wild kernel pointer case - which
again is part of the whole point of this code. The problem wouldn't be
about the _sleeping_ part of the page fault, but about a bad kernel
access. The fact that that bad kernel access might happen in a section
that you shouldn't sleep in is secondary.
So it really ends up being the case that this is simply entirely the
wrong place to do this debug check and related scheduling point at all.
So let's just remove the check entirely. It's been around for over a
decade, it has served its purpose.
The re-schedule will happen at return to user space anyway for the
normal case, and the warning - if we even need it - might be better off
done as a special case for "page fault from kernel mode" once we've
dealt with any potential kernel oopses where the oops is the relevant
thing, not some artificial "scheduling while atomic" test.
Reported-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/lkml/20230820104303.2083444-1-mjguzik@gmail.com/
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anh Tuan Phan [Fri, 18 Aug 2023 17:37:02 +0000 (00:37 +0700)]
selftests/net: Add log.txt and tools to .gitignore
Update .gitignore to untrack tools directory and log.txt. "tools" is
generated in "selftests/net/Makefile" and log.txt is generated in
"selftests/net/gro.sh" when executing run_all_tests.
Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 20 Aug 2023 13:02:52 +0000 (15:02 +0200)]
Linux 6.5-rc7
Eric Dumazet [Sat, 19 Aug 2023 03:17:07 +0000 (03:17 +0000)]
ipv4: fix data-races around inet->inet_id
UDP sendmsg() is lockless, so ip_select_ident_segs()
can very well be run from multiple cpus [1]
Convert inet->inet_id to an atomic_t, but implement
a dedicated path for TCP, avoiding cost of a locked
instruction (atomic_add_return())
Note that this patch will cause a trivial merge conflict
because we added inet->flags in net-next tree.
v2: added missing change in
drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c
(David Ahern)
[1]
BUG: KCSAN: data-race in __ip_make_skb / __ip_make_skb
read-write to 0xffff888145af952a of 2 bytes by task 7803 on cpu 1:
ip_select_ident_segs include/net/ip.h:542 [inline]
ip_select_ident include/net/ip.h:556 [inline]
__ip_make_skb+0x844/0xc70 net/ipv4/ip_output.c:1446
ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560
udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260
inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2634
__do_sys_sendmmsg net/socket.c:2663 [inline]
__se_sys_sendmmsg net/socket.c:2660 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff888145af952a of 2 bytes by task 7804 on cpu 0:
ip_select_ident_segs include/net/ip.h:541 [inline]
ip_select_ident include/net/ip.h:556 [inline]
__ip_make_skb+0x817/0xc70 net/ipv4/ip_output.c:1446
ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560
udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260
inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2634
__do_sys_sendmmsg net/socket.c:2663 [inline]
__se_sys_sendmmsg net/socket.c:2660 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x184d -> 0x184e
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 7804 Comm: syz-executor.1 Not tainted 6.5.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
==================================================================
Fixes:
23f57406b82d ("ipv4: avoid using shared IP generator for connected sockets")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sat, 19 Aug 2023 01:26:02 +0000 (18:26 -0700)]
net: validate veth and vxcan peer ifindexes
veth and vxcan need to make sure the ifindexes of the peer
are not negative, core does not validate this.
Using iproute2 with user-space-level checking removed:
Before:
# ./ip link add index 10 type veth peer index -1
# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff
10: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff
-1: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff
Now:
$ ./ip link add index 10 type veth peer index -1
Error: ifindex can't be negative.
This problem surfaced in net-next because an explicit WARN()
was added, the root cause is older.
Fixes:
e6f8f1a739b6 ("veth: Allow to create peer link with given ifindex")
Fixes:
a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)")
Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 20 Aug 2023 09:58:28 +0000 (10:58 +0100)]
Merge branch 'fixed_phy_register-return-value'
Ruan Jinjie says:
====================
net: Fix return value check for fixed_phy_register()
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Changes in v3:
- Drop the error fix patch for fixed_phy_get_gpiod().
- Split the error code update code into another patch set as suggested.
- Update the commit title and message.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ruan Jinjie [Fri, 18 Aug 2023 05:12:21 +0000 (13:12 +0800)]
net: bcmgenet: Fix return value check for fixed_phy_register()
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Fixes:
b0ba512e25d7 ("net: bcmgenet: enable driver to work without a device tree")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ruan Jinjie [Fri, 18 Aug 2023 05:12:20 +0000 (13:12 +0800)]
net: bgmac: Fix return value check for fixed_phy_register()
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Fixes:
c25b23b8a387 ("bgmac: register fixed PHY for ARM BCM470X / BCM5301X chipsets")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 20 Aug 2023 06:26:51 +0000 (08:26 +0200)]
Merge tag 'tty-6.5-rc7' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial core fixes for 6.5-rc7 that resolve
a lot of reported issues.
Primarily in here are the fixes for the serial bus code from Tony that
came in -rc1, as it hit wider testing with the huge number of
different types of systems and serial ports. All of the reported
issues with duplicate names and other issues with this code are now
resolved.
Other than that included in here is:
- n_gsm fix for a previous fix
- 8250 lockdep annotation fix
- fsl_lpuart serial driver fix
- TIOCSTI documentation update for previous CAP_SYS_ADMIN change
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: core: Fix serial core port id, including multiport devices
serial: 8250: drop lockdep annotation from serial8250_clear_IER()
tty: n_gsm: fix the UAF caused by race condition in gsm_cleanup_mux
serial: core: Revert port_id use
TIOCSTI: Document CAP_SYS_ADMIN behaviour in Kconfig
serial: 8250: Fix oops for port->pm on uart_change_pm()
serial: 8250: Reinit port_id when adding back serial8250_isa_devs
serial: core: Fix kmemleak issue for serial core device remove
MAINTAINERS: Merge TTY layer and serial drivers
serial: core: Fix serial_base_match() after fixing controller port name
serial: core: Fix serial core controller port name to show controller id
serial: core: Fix serial core port id to not use port->line
serial: core: Controller id cannot be negative
tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms
Linus Torvalds [Sun, 20 Aug 2023 06:18:58 +0000 (08:18 +0200)]
Merge tag 'rust-fixes-6.5-rc7' of https://github.com/Rust-for-Linux/linux
Pull rust fix from Miguel Ojeda:
- Macros: fix 'HAS_*' redefinition by the '#[vtable]' macro
under conditional compilation
* tag 'rust-fixes-6.5-rc7' of https://github.com/Rust-for-Linux/linux:
rust: macros: vtable: fix `HAS_*` redefinition (`gen_const_name`)
Serge Semin [Fri, 18 Aug 2023 12:54:45 +0000 (15:54 +0300)]
net: phy: Fix deadlocking in phy_error() invocation
Since commit
91a7cda1f4b8 ("net: phy: Fix race condition on link status
change") all the phy_error() method invocations have been causing the
nested-mutex-lock deadlock because it's normally done in the PHY-driver
threaded IRQ handlers which since that change have been called with the
phydev->lock mutex held. Here is the calls thread:
IRQ: phy_interrupt()
+-> mutex_lock(&phydev->lock); <--------------------+
drv->handle_interrupt() | Deadlock due
+-> ERROR: phy_error() + to the nested
+-> phy_process_error() | mutex lock
+-> mutex_lock(&phydev->lock); <-+
phydev->state = PHY_ERROR;
mutex_unlock(&phydev->lock);
mutex_unlock(&phydev->lock);
The problem can be easily reproduced just by calling phy_error() from any
PHY-device threaded interrupt handler. Fix it by dropping the phydev->lock
mutex lock from the phy_process_error() method and printing a nasty error
message to the system log if the mutex isn't held in the caller execution
context.
Note for the fix to work correctly in the PHY-subsystem itself the
phydev->lock mutex locking must be added to the phy_error_precise()
function.
Link: https://lore.kernel.org/netdev/20230816180944.19262-1-fancer.lancer@gmail.com
Fixes:
91a7cda1f4b8 ("net: phy: Fix race condition on link status change")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Josua Mayer [Fri, 18 Aug 2023 11:05:56 +0000 (13:05 +0200)]
net: sfp: handle 100G/25G active optical cables in sfp_parse_support
Handle extended compliance code 0x1 (SFF8024_ECC_100G_25GAUI_C2M_AOC)
for active optical cables supporting 25G and 100G speeds.
Since the specification makes no statement about transmitter range, and
as the specific sfp module that had been tested features only 2m fiber -
short-range (SR) modes are selected.
The 100G speed is irrelevant because it would require multiple fibers /
multiple SFP28 modules combined under one netdev.
sfp-bus.c only handles a single module per netdev, so only 25Gbps modes
are selected.
sfp_parse_support already handles SFF8024_ECC_100GBASE_SR4_25GBASE_SR
with compatible properties, however that entry is a contradiction in
itself since with SFP(28) 100GBASE_SR4 is impossible - that would likely
be a mode for qsfp modules only.
Add a case for SFF8024_ECC_100G_25GAUI_C2M_AOC selecting 25gbase-r
interface mode and 25000baseSR link mode.
Also enforce SFP28 bitrate limits on the values read from sfp eeprom as
requested by Russell King.
Tested with fs.com S28-AO02 AOC SFP28 module.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 19 Aug 2023 17:22:41 +0000 (19:22 +0200)]
Merge tag 'i2c-for-6.5-rc7' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Usual set of driver fixes. A bit more than usual because I was
unavailable for a while"
* tag 'i2c-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: bcm-iproc: Fix bcm_iproc_i2c_isr deadlock issue
i2c: Update documentation to use .probe() again
i2c: sun6i-p2wi: Fix an error message in probe()
i2c: hisi: Only handle the interrupt of the driver's transfer
i2c: tegra: Fix i2c-tegra DMA config option processing
i2c: tegra: Fix failure during probe deferral cleanup
i2c: designware: Handle invalid SMBus block data response length value
i2c: designware: Correct length byte validation logic
i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work
Linus Torvalds [Sat, 19 Aug 2023 15:57:07 +0000 (17:57 +0200)]
Merge tag 'for-6.5-rc6-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix infinite loop in readdir(), could happen in a big directory when
files get renamed during enumeration
- fix extent map handling of skipped pinned ranges
- fix a corner case when handling ordered extent length
- fix a potential crash when balance cancel races with pause
- verify correct uuid when starting scrub or device replace
* tag 'for-6.5-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix incorrect splitting in btrfs_drop_extent_map_range
btrfs: fix BUG_ON condition in btrfs_cancel_balance
btrfs: only subtract from len_to_oe_boundary when it is tracking an extent
btrfs: fix replace/scrub failure with metadata_uuid
btrfs: fix infinite directory reads
Linus Torvalds [Sat, 19 Aug 2023 15:43:55 +0000 (17:43 +0200)]
Merge tag 'fbdev-for-6.5-rc7' of git://git./linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and cleanups from Helge Deller:
- various code cleanups in amifb, atmel_lcdfb, ssd1307fb, kyro and
goldfishfb
* tag 'fbdev-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: goldfishfb: Do not check 0 for platform_get_irq()
fbdev: atmel_lcdfb: Remove redundant of_match_ptr()
fbdev: kyro: Remove unused declarations
fbdev: ssd1307fb: Print the PWM's label instead of its number
fbdev: mmp: fix value check in mmphw_probe()
fbdev: amifb: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
Linus Torvalds [Sat, 19 Aug 2023 15:31:46 +0000 (17:31 +0200)]
Merge tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Main thing here is the fix for the regression in flush handling which
caused IO hangs/stalls for a few reporters. Hopefully that should all
be sorted out now. Outside of that, just a few minor fixes for issues
that were introduced in this cycle"
* tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linux:
blk-mq: release scheduler resource when request completes
blk-crypto: dynamically allocate fallback profile
blk-cgroup: hold queue_lock when removing blkg->q_node
drivers/rnbd: restore sysfs interface to rnbd-client
Chuck Lever [Mon, 3 Jul 2023 18:18:29 +0000 (14:18 -0400)]
xprtrdma: Remap Receive buffers after a reconnect
On server-initiated disconnect, rpcrdma_xprt_disconnect() was DMA-
unmapping the Receive buffers, but rpcrdma_post_recvs() neglected
to remap them after a new connection had been established. The
result was immediate failure of the new connection with the Receives
flushing with LOCAL_PROT_ERR.
Fixes:
671c450b6fe0 ("xprtrdma: Fix oops in Receive handler after device removal")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fedor Pchelkin [Tue, 25 Jul 2023 11:59:30 +0000 (14:59 +0300)]
NFSv4: fix out path in __nfs4_get_acl_uncached
Another highly rare error case when a page allocating loop (inside
__nfs4_get_acl_uncached, this time) is not properly unwound on error.
Since pages array is allocated being uninitialized, need to free only
lower array indices. NULL checks were useful before commit
62a1573fcf84
("NFSv4 fix acl retrieval over krb5i/krb5p mounts") when the array had
been initialized to zero on stack.
Found by Linux Verification Center (linuxtesting.org).
Fixes:
62a1573fcf84 ("NFSv4 fix acl retrieval over krb5i/krb5p mounts")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fedor Pchelkin [Tue, 25 Jul 2023 11:58:58 +0000 (14:58 +0300)]
NFSv4.2: fix error handling in nfs42_proc_getxattr
There is a slight issue with error handling code inside
nfs42_proc_getxattr(). If page allocating loop fails then we free the
failing page array element which is NULL but __free_page() can't deal with
NULL args.
Found by Linux Verification Center (linuxtesting.org).
Fixes:
a1f26739ccdc ("NFSv4.2: improve page handling for GETXATTR")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Benjamin Coddington [Mon, 10 Jul 2023 18:41:58 +0000 (14:41 -0400)]
NFS: Fix sysfs server name memory leak
Free the formatted server index string after it has been duplicated by
kobject_rename().
Fixes:
1c7251187dc0 ("NFS: add superblock sysfs entries")
Reported-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Chengming Zhou [Sun, 13 Aug 2023 15:23:25 +0000 (23:23 +0800)]
blk-mq: release scheduler resource when request completes
Chuck reported [1] an IO hang problem on NFS exports that reside on SATA
devices and bisected to commit
615939a2ae73 ("blk-mq: defer to the normal
submission path for post-flush requests").
We analysed the IO hang problem, found there are two postflush requests
waiting for each other.
The first postflush request completed the REQ_FSEQ_DATA sequence, so go to
the REQ_FSEQ_POSTFLUSH sequence and added in the flush pending list, but
failed to blk_kick_flush() because of the second postflush request which
is inflight waiting in scheduler queue.
The second postflush waiting in scheduler queue can't be dispatched because
the first postflush hasn't released scheduler resource even though it has
completed by itself.
Fix it by releasing scheduler resource when the first postflush request
completed, so the second postflush can be dispatched and completed, then
make blk_kick_flush() succeed.
While at it, remove the check for e->ops.finish_request, as all
schedulers set that. Reaffirm this requirement by adding a WARN_ON_ONCE()
at scheduler registration time, just like we do for insert_requests and
dispatch_request.
[1] https://lore.kernel.org/all/
7A57C7AE-A51A-4254-888B-
FE15CA21F9E9@oracle.com/
Link: https://lore.kernel.org/linux-block/20230819031206.2744005-1-chengming.zhou@linux.dev/
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/
202308172100.
8ce4b853-oliver.sang@intel.com
Fixes:
615939a2ae73 ("blk-mq: defer to the normal submission path for post-flush requests")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20230813152325.3017343-1-chengming.zhou@linux.dev
[axboe: folded in incremental fix and added tags]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Serge Semin [Wed, 16 Aug 2023 18:06:52 +0000 (21:06 +0300)]
net: mdio: mdio-bitbang: Fix C45 read/write protocol
Based on the original code semantic in case of Clause 45 MDIO, the address
command is supposed to be followed by the command sending the MMD address,
not the CSR address. The commit
002dd3de097c ("net: mdio: mdio-bitbang:
Separate C22 and C45 transactions") has erroneously broken that. So most
likely due to an unfortunate variable name it switched the code to sending
the CSR address. In our case it caused the protocol malfunction so the
read operation always failed with the turnaround bit always been driven to
one by PHY instead of zero. Fix that by getting back the correct
behaviour: sending MMD address command right after the regular address
command.
Fixes:
002dd3de097c ("net: mdio: mdio-bitbang: Separate C22 and C45 transactions")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arınç ÜNAL [Sun, 13 Aug 2023 10:59:17 +0000 (13:59 +0300)]
net: dsa: mt7530: fix handling of 802.1X PAE frames
802.1X PAE frames are link-local frames, therefore they must be trapped to
the CPU port. Currently, the MT753X switches treat 802.1X PAE frames as
regular multicast frames, therefore flooding them to user ports. To fix
this, set 802.1X PAE frames to be trapped to the CPU port(s).
Fixes:
b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 19 Aug 2023 11:13:55 +0000 (13:13 +0200)]
Merge tag 'media/v6.5-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Three driver fixes"
* tag 'media/v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: imx: imx7-media-csi: Fix applying format constraints
media: uvcvideo: Fix menu count handling for userspace XU mappings
media: mtk-jpeg: Set platform driver data earlier
Linus Torvalds [Sat, 19 Aug 2023 08:46:02 +0000 (10:46 +0200)]
Merge tag 'x86_urgent_for_v6.5_rc7' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"Extraordinary embargoed times call for extraordinary measures. That's
why this week's x86/urgent branch is larger than usual, containing all
the known fallout fixes after the SRSO mitigation got merged.
I know, it is a bit late in the game but everyone who has reported a
bug stemming from the SRSO pile, has tested that branch and has
confirmed that it fixes their bug.
Also, I've run it on every possible hardware I have and it is looking
good. It is running on this very machine while I'm typing, for 2 days
now without an issue. Famous last words...
- Use LEA ...%rsp instead of ADD %rsp in the Zen1/2 SRSO return
sequence as latter clobbers flags which interferes with fastop
emulation in KVM, leading to guests freezing during boot
- A fix for the DIV(0) quotient data leak on Zen1 to clear the
divider buffers at the right time
- Disable the SRSO mitigation on unaffected configurations as it got
enabled there unnecessarily
- Change .text section name to fix CONFIG_LTO_CLANG builds
- Improve the optprobe indirect jmp check so that certain
configurations can still be able to use optprobes at all
- A serious and good scrubbing of the untraining routines by PeterZ:
- Add proper speculation stopping traps so that objtool is happy
- Adjust objtool to handle the new thunks
- Make the thunk pointer assignable to the different untraining
sequences at runtime, thus avoiding the alternative at the
return thunk. It simplifies the code a bit too.
- Add a entry_untrain_ret() main entry point which selects the
respective untraining sequence
- Rename things so that they're more clear
- Fix stack validation with FRAME_POINTER=y builds
- Fix static call patching to handle when a JMP to the return thunk
is the last insn on the very last module memory page
- Add more documentation about what each untraining routine does and
why"
* tag 'x86_urgent_for_v6.5_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/srso: Correct the mitigation status when SMT is disabled
x86/static_call: Fix __static_call_fixup()
objtool/x86: Fixup frame-pointer vs rethunk
x86/srso: Explain the untraining sequences a bit more
x86/cpu/kvm: Provide UNTRAIN_RET_VM
x86/cpu: Cleanup the untrain mess
x86/cpu: Rename srso_(.*)_alias to srso_alias_\1
x86/cpu: Rename original retbleed methods
x86/cpu: Clean up SRSO return thunk mess
x86/alternative: Make custom return thunk unconditional
objtool/x86: Fix SRSO mess
x86/cpu: Fix up srso_safe_ret() and __x86_return_thunk()
x86/cpu: Fix __x86_return_thunk symbol type
x86/retpoline,kprobes: Skip optprobe check for indirect jumps with retpolines and IBT
x86/retpoline,kprobes: Fix position of thunk sections with CONFIG_LTO_CLANG
x86/srso: Disable the mitigation on unaffected configurations
x86/CPU/AMD: Fix the DIV(0) initial fix attempt
x86/retpoline: Don't clobber RFLAGS during srso_safe_ret()
Linus Torvalds [Sat, 19 Aug 2023 06:32:16 +0000 (08:32 +0200)]
Merge tag 'powerpc-6.5-6' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix hardened usercopy BUG when using /proc based firmware update
interface
Thanks to Nathan Lynch and Kees Cook.
* tag 'powerpc-6.5-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/rtas_flash: allow user copy to flash block cache objects
Jakub Kicinski [Sat, 19 Aug 2023 02:41:10 +0000 (19:41 -0700)]
Merge branch 'mlxsw-fixes-for-spectrum-4'
Petr Machata says:
====================
mlxsw: Fixes for Spectrum-4
This patchset contains an assortment of fixes for mlxsw Spectrum-4 support.
====================
Link: https://lore.kernel.org/r/cover.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Thu, 17 Aug 2023 13:58:25 +0000 (15:58 +0200)]
selftests: mlxsw: Fix test failure on Spectrum-4
Remove assumptions about shared buffer cell size and instead query the
cell size from devlink. Adjust the test to send small packets that fit
inside a single cell.
Tested on Spectrum-{1,2,3,4}.
Fixes:
4735402173e6 ("mlxsw: spectrum: Extend to support Spectrum-4 ASIC")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/f7dfbf3c4d1cb23838d9eb99bab09afaa320c4ca.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Amit Cohen [Thu, 17 Aug 2023 13:58:24 +0000 (15:58 +0200)]
mlxsw: Fix the size of 'VIRT_ROUTER_MSB'
The field 'virtual router' was extended to 12 bits in Spectrum-4.
Therefore, the element 'MLXSW_AFK_ELEMENT_VIRT_ROUTER_MSB' needs 3 bits for
Spectrum < 4 and 4 bits for Spectrum >= 4.
The elements are stored in an internal storage scratchpad. Currently, the
MSB is defined there as 3 bits. It means that for Spectrum-4, only 2K VRFs
can be used for multicast routing, as the highest bit is not really used by
the driver. Fix the definition of 'VIRT_ROUTER_MSB' to use 4 bits. Adjust
the definitions of 'virtual router' field in the blocks accordingly - use
'_avoid_size_check' for Spectrum-2 instead of for Spectrum-4. Fix the mask
in parse function to use 4 bits.
Fixes:
6d5d8ebb881c ("mlxsw: Rename virtual router flex key element")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/79bed2b70f6b9ed58d4df02e9798a23da648015b.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>