OSDN Git Service
Ladislav Michl [Tue, 4 Dec 2018 18:21:33 +0000 (19:21 +0100)]
ASoC: max9867: Fix signal paths
Sound capture and line bypass currently do not work as well as
some mixer controls. Fix that by building proper audio paths and
adjusting volume controls to match datasheet.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Ladislav Michl [Tue, 4 Dec 2018 18:21:04 +0000 (19:21 +0100)]
ASoC: max9867: Calculate LRCLK divider
Drop "Common NI Values Table" and calculate LRCLK divider, then
add allowed rate constraints based on master clock frequency.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Ladislav Michl [Tue, 4 Dec 2018 18:19:51 +0000 (19:19 +0100)]
ASoC: max9867: Fix power management
Implement set_bias_level to drive shutdown bit, so device is
put to sleep when unused.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Ladislav Michl [Tue, 4 Dec 2018 18:18:17 +0000 (19:18 +0100)]
ASoC: max9867: Remove useless assignment
ret is assigned later, no need to initialize it.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Daniel Mack [Thu, 6 Dec 2018 12:24:57 +0000 (13:24 +0100)]
ASoC: codecs: ak4104: move to GPIO consumer API
Get the reset GPIO through the GPIO consumer API. This allows specifying the
DT property as "reset-gpios" without breaking existing DT users.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Daniel Mack [Thu, 6 Dec 2018 12:24:56 +0000 (13:24 +0100)]
ASoC: dt-bindings: ak4104: use 'reset-gpios' rather than 'reset-gpio'
Bindings should use 'reset-gpios', not 'reset-gpio'. The driver needs to
switch to the gpiod consume API to handle this correctly.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Daniel Mack [Thu, 6 Dec 2018 12:24:26 +0000 (13:24 +0100)]
ASoC: codecs: cs4270: move to GPIO consumer API
Get the reset GPIO through the GPIO consumer API. This allows specifying the
DT property as "reset-gpios" without breaking existing DT users.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Daniel Mack [Thu, 6 Dec 2018 12:24:25 +0000 (13:24 +0100)]
ASoC: dt-bindings: cs4270: use 'reset-gpios' rather than 'reset-gpio'
Bindings should use 'reset-gpios', not 'reset-gpio'. The driver needs to
switch to the gpiod consume API to handle this correctly.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Rob Herring [Wed, 5 Dec 2018 19:50:49 +0000 (13:50 -0600)]
ASoC: Use of_node_name_eq for node name comparisons
Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.
For the FSL ASoC card, the full node names appear to be "ssi", "esai",
and "sai", so there's not any reason to use strstr and of_node_name_eq
can be used instead.
Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Yu Zhao [Tue, 4 Dec 2018 22:42:53 +0000 (15:42 -0700)]
ASoC: use dma_ops of parent device for acp_audio_dma
AMD platform device acp_audio_dma can only be created by parent PCI
device driver (drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c). Pass struct
device of the parent to snd_pcm_lib_preallocate_pages() so
dma_alloc_coherent() can use correct dma_ops. Otherwise, it will
use default dma_ops which is nommu_dma_ops on x86_64 even when
IOMMU is enabled and set to non passthrough mode.
Though platform device inherits some dma related fields during its
creation in mfd_add_device(), we can't simply pass its struct device
to snd_pcm_lib_preallocate_pages() because dma_ops is not among the
inherited fields. Even it were, drivers/iommu/amd_iommu.c would
ignore it because get_device_id() doesn't handle platform device.
This change shouldn't give us any trouble even struct device of the
parent becomes null or represents some non PCI device in the future,
because get_dma_ops() correctly handles null struct device or uses
the default dma_ops if struct device doesn't have it set.
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Yu Zhao [Tue, 4 Dec 2018 22:42:52 +0000 (15:42 -0700)]
ASoC: use DMA addr rather than CPU pa for acp_audio_dma
We shouldn't assume CPU physical address we get from page_to_phys()
is same as DMA address we get from dma_alloc_coherent(). On x86_64,
we won't run into any problem with the assumption when dma_ops is
nommu_dma_ops. However, DMA address is IOVA when IOMMU is enabled.
And it's most likely different from CPU physical address when AMD
IOMMU is not in passthrough mode.
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Ryan Lee [Fri, 30 Nov 2018 03:21:09 +0000 (03:21 +0000)]
ASoC: max98373: Added max98373_reset for stable amp reset
This patch added max98373_reset function to avoid amp software reset failure and code duplication.
Reset verification step has been added for stable amp reset and it repeats verification maximum 3 times when it is failed.
Chip revision ID is available when the amp is in the idle state which means software reset is completed well.
Additional 10ms delay was added for every retrial and maximum 30ms delay can be applied.
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Fri, 30 Nov 2018 02:07:48 +0000 (02:07 +0000)]
ASoC: audio-graph-card: use cpu/codec pointer on graph_dai_props
In DPCM case, it uses CPU-dummy / dummy-Codec dai links, and
non DPCM case, it uses CPU-Codec dai links.
Now, we want to merge audio-graph-card and audio-graph-scu-card.
These sound cards are using silimar but not same logic on each functions.
Then, of course we want to share same logic.
To compromise, this patch uses cpu/codec pointer on audio-graph-card.
It is same logic with audio-graph-scu-card, thus easy merging.
This is prepare for merging audio card
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Fri, 30 Nov 2018 02:07:32 +0000 (02:07 +0000)]
ASoC: audio-graph-scu-card: care multi DPCM codec_conf
Current audio-graph-scu-card didn't care about codec_conf
for multi DPCM case. This patch cares it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Fri, 30 Nov 2018 02:07:15 +0000 (02:07 +0000)]
ASoC: audio-graph-scu-card: use cpu/codec pointer on graph_dai_props
In DPCM case, it uses CPU-dummy / dummy-Codec dai links, and
non DPCM case, it uses CPU-Codec dai links.
Now, we want to merge audio-graph-card and audio-graph-scu-card.
These sound cards are using silimar but not same logic on each functions.
Then, of course we want to share same logic.
To compromise, this patch uses cpu/codec pointer on audio-graph-scu-card.
It is same logic with audio-graph-card, thus easy merging.
This is prepare for merging audio card
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Fri, 30 Nov 2018 02:06:51 +0000 (02:06 +0000)]
ASoC: audio-graph-scu-card: care link / dai count
In DPCM case, it uses CPU-dummy / dummy-Codec dai links.
If sound card is caring only DPCM, link count = dai count,
but, if non DPCM case, link count != dai count.
Now, we want to merge audio-graph-card and audio-graph-scu-card,
then, we need to care both link / dai count more carefly
This patch cares it, and prepare for merging audio card
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Fri, 30 Nov 2018 02:04:13 +0000 (02:04 +0000)]
ASoC: simple-card-utils: fixup asoc_simple_card_get_dai_id() counting
asoc_simple_card_get_dai_id() returns DAI ID, but it is based on
DT node's "endpoint" position.
Almost all cases 1 port has 1 endpoint, thus, it was no problem.
But in reality, port : endpoint = 1 : N, thus, counting endpoint
is BUG, it should based on "port" ID.
This patch fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Tue, 4 Dec 2018 08:02:43 +0000 (08:02 +0000)]
ASoC: rsnd: add missing TDM Split mode support for simple-card
commit
f69f452243e4e1 ("ASoC: rsnd: add TDM Split mode support")
added TDM Split mode support for rsnd driver.
But, it cares audio-graph-card style only. We can't use TDM Split
mode on simple-card style now.
This patch fixup this issue.
Fixes:
f69f452243e4e1 ("ASoC: rsnd: add TDM Split mode support")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Tue, 4 Dec 2018 08:00:47 +0000 (08:00 +0000)]
ASoC: rsnd: fixup mod ID for CTU regmap read/write
commit
c16015f36cc12824 ("ASoC: rsnd: add .get_id/.get_id_sub")
add new .get_id/.get_id_sub to indicate module ID/subID.
It is used for SSIU and CTU. In SSIU case, subID indicates BUSIF,
but register settings is based on SSIU ID.
OTOH, in CTU case, subID indicates CTU channel, and register settings
is based on it. This means regmap read/write function needs to care it.
This patch fixup this issue. It can't play MIXed sound without this
patch.
Fixes:
c16015f36cc12824 ("ASoC: rsnd: add .get_id/.get_id_sub")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Tue, 4 Dec 2018 07:59:05 +0000 (07:59 +0000)]
ASoC: rsnd: indicates Channel and Mode for debug
For TDM debug purpose, indicating Channel and Mode is very
useful. This patch indicate it if it has #define DEBUG
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Daniel Mack [Sat, 1 Dec 2018 14:08:46 +0000 (15:08 +0100)]
ASoC: pxa: remove raumfeld machine driver
These boards are now fully ported to devicetree and make use of the
simple-card driver, so the platform specific machine driver can be
removed.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Sat, 1 Dec 2018 00:54:37 +0000 (18:54 -0600)]
ASoC: Intel: common: add ACPI matching tables for ICL
Entry needed for ICL RVP w/ RT274
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Lubomir Rintel [Mon, 3 Dec 2018 11:47:28 +0000 (12:47 +0100)]
ASoC: dt-bindings: use a generic node name for rt5631
The example should follow the practice or using a generic node name
instead of the precise programming model, as recommended by the DTSpec.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Young_X [Tue, 27 Nov 2018 06:33:16 +0000 (06:33 +0000)]
ASoC: au8540: use 64-bit arithmetic instead of 32-bit
Add suffix ULL to constant 256 in order to give the compiler complete
information about the proper arithmetic to use.
Notice that such constant is used in a context that expects an
expression of type u64 (64 bits, unsigned) and the following
expression is currently being evaluated using 32-bit arithmetic:
256 * fs * 2 * mclk_src_scaling[i].param
Signed-off-by: Young_X <YangX92@hotmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Jenny TC [Wed, 28 Nov 2018 06:52:46 +0000 (12:22 +0530)]
ASoC: dmic: introduce module_param wakeup_delay
Introducing a module param for wakeup_delay in order to
align with modeswitch_delay parameter. With this change, both
wakeup_delay and modeswitch_delay parameters can be passed
as module parameters.
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Jenny TC [Wed, 28 Nov 2018 06:52:45 +0000 (12:22 +0530)]
ASoC: dmic: introduce mode switch delay
On startup, applications such as PulseAudio or CRAS enable playback or
capture on all PCM devices to verify that configurations are correct,
and close them immediately. For DMICs, this can result in the clock
being turned off very quickly, which may not compatible with internal
state machine transition requirements.
This patch add a mode-switch delay which will prevent the clock from
being turned off without complying with manufacturer timing
specifications. While the DMIC clock may be controlled at a lower level,
be it with hardware or firmware, applying the delay during the
STOP_TRIGGER phase ensures that there is no race condition, e.g. with
the hardware/firmware turning off the clock earlier
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Wed, 14 Nov 2018 12:46:30 +0000 (14:46 +0200)]
dt-bindings: sound: omap-mcpdm: Update documentation for pdmclk
McPDM module receives it's functional clock from external source. This
clock is the pdmclk provided by the twl6040 audio IC. If the clock is not
available all register accesses to McPDM fails and the module is not
operational.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cheng-Yi Chiang [Sat, 24 Nov 2018 11:09:46 +0000 (19:09 +0800)]
ASoC: qcom: sdm845: Create and setup jack in init callback
Add a callback for init ops on dai_link to create and setup jack.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cheng-Yi Chiang [Sat, 24 Nov 2018 11:09:45 +0000 (19:09 +0800)]
ASoC: qcom: sdm845: Add board specific dapm widgets
Add board specific dapm widgets so these widgets can be used
in the route.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Fri, 16 Nov 2018 13:41:41 +0000 (15:41 +0200)]
ASoC: davinci-mcasp: Implement configurable dismod handling
If the dismod is specified in the DT node, use the specified custom value
to configure the drive on state of the inactive TX slots.
If the dismod is not present or booted in legacy mode, the dismod is set
to low as it was the original behavior.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Fri, 16 Nov 2018 13:41:40 +0000 (15:41 +0200)]
ASoC: davinci-mcasp: Document dismod optional property
The dismod property can be used to specify the drive on level of inactive
TX slots.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Fri, 16 Nov 2018 13:41:39 +0000 (15:41 +0200)]
ASoC: davinci-mcasp: Update PDIR (pin direction) register handling
When McASP is master and the PDIR for the clock pins are configured as
outputs before the clocking is configured it will output whatever clock
is generated at the moment internally.
The clock will switch to the correct rate only when the we start the clock
generators.
To avoid this we must only set the pin as output after the clock is
configured and enabled.
AXR pins configured as outputs behaves somehow interesting as well:
when McASP is not enabled and the pin is selected as output it will not
honor the DISMOD settings for the inactive state, but will pull the pin
down.
Add a new bitfield and mark the pins there which needs to be output and
set the pins only at the time when they will behave correctly.
On stream stop configure the pins back to input which makes them to obey
the global pin configuration regarding to pull up/down.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Fri, 16 Nov 2018 13:41:38 +0000 (15:41 +0200)]
ASoC: davinci-mcasp: Clear TXSTAT register before activating serializers
Follow the guideline from the TRM:
Before starting, clear the respective transmitter and receiver status
registers
To avoid stale state stored in the status registers.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Subhransu S. Prusty [Mon, 29 Jan 2018 16:16:00 +0000 (21:46 +0530)]
ASoC: Intel: Skylake: Add FW reply for MCLK/SCLK IPC
If mclk/sclk is already running, FW responds with IPC reply MCLK/SCLK
already running. Add these to the IPC reply lookup table.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Subhransu S. Prusty [Mon, 29 Jan 2018 16:15:59 +0000 (21:45 +0530)]
ASoC: Intel: Skylake: Make DSP replies more human readable
Add more meaning to the IPC replies for easy debugging. Replace the switch
case with a lookup table to lookup for the IPC replies and print in human
readable form.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Ladislav Michl [Fri, 23 Nov 2018 14:27:00 +0000 (15:27 +0100)]
ASoC: max9867: Fix whitespace
Minor changes to match coding style.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 26 Nov 2018 01:21:22 +0000 (01:21 +0000)]
ASoC: soc.h: makes snd_soc_of_parse_audio_prefix() inline
commit
3b7103562c03c ("ASoC: soc-core: add
snd_soc_of_parse_node_prefix()") maked snd_soc_of_parse_audio_prefix()
as #define. But it'd be better to make this a static inline rather than
a #define. It helps with error messages and type safety.
This patch makes it inline.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 26 Nov 2018 01:17:01 +0000 (01:17 +0000)]
ASoC: rsnd: tidyup for SSIU subnode
commit
da48a6eb82ea2 ("ASoC: rsnd: add SSIU BUSIF support for
Document") updated Documentation for SSIU, but 1) we want to
keep old/deprecated DMA description, 2) it is missing SSIU
subnode properties. This patch tidyup these
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Dan Carpenter [Mon, 26 Nov 2018 08:13:07 +0000 (11:13 +0300)]
ASoC: amd: Fix a NULL vs IS_ERR() check in probe
The platform_device_register_full() function doesn't return NULL, it
returns error pointers.
Fixes:
7894a7e7ea3d ("ASoC: amd: create ACP3x PCM platform device")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Thu, 22 Nov 2018 00:57:40 +0000 (00:57 +0000)]
ASoC: audio-graph-card: tidyup define position
commit
f986907c9225 ("ASoC: audio-graph-card: add widgets and routing for
external amplifier support") added new function
asoc_graph_card_outdrv_event(), but the inserted position breaks
define area. This patch tidyup it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Thu, 22 Nov 2018 00:57:23 +0000 (00:57 +0000)]
ASoC: audio-graph-card: tidyup typo SND_AUDIO_GRAPH_CARD
1 "simple" is enough on Kconfig help
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Thu, 22 Nov 2018 00:57:09 +0000 (00:57 +0000)]
ASoC: audio-graph-scu-card: tidyup asoc_simple_card_parse_daifmt() timing
Current audio-graph-scu-card driver is parsing codec position for DPCM
and consider DAI format. But, current operation is doing totally pointless,
because 1) asoc_simple_card_parse_daifmt() will be called not only for 1st
codec on current implementation, and it will be used as fixed format
2) it should be called for each CPU/Codec pair.
Let's tidyup asoc_simple_card_parse_daifmt() timing.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Thu, 22 Nov 2018 00:56:53 +0000 (00:56 +0000)]
ASoC: audio-graph-scu-card: tidyup "convert-rate/channels" parsing
audio-graph-scu-card.c is supporting "convert-rate/channels" which is
used for DPCM.
But, sound card might have multi codecs, and each codec might need
each convert-rate/channels.
This patch supports each codec's convert-rate/channles support.
top node convert-rate/channels will overwrite settings if exist.
It can't support each codec's convert-rate/channels if sound card had
multi codecs without this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Thu, 22 Nov 2018 00:56:41 +0000 (00:56 +0000)]
ASoC: audio-graph-scu-card: tidyup "convert-rate/channels" parsing on Doc
audio-graph-scu-card.c is supporting "convert-rate/channels" which is
used for DPCM.
But, sound card might have multi codecs, and each codec might need
each convert-rate/channels.
This patch supports each codec's convert-rate/channles support.
top node convert-rate/channels will overwrite settings if exist.
It can't support each codec's convert-rate/channels if sound card had
multi codecs without this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Thu, 22 Nov 2018 00:56:21 +0000 (00:56 +0000)]
ASoC: audio-graph-scu-card: tidyup "prefix" parsing
audio-graph-scu-card.c is supporting "prefix" which is used to avoid
DAI naming conflict when CPU/Codec matching.
But, sound card might have multi sub-devices, and each codec might need
each prefix.
Now, ASoC is supporting snd_soc_of_parse_node_prefix(), let's support
it on audio-graph-scu-card, too. It is keeping existing DT style.
It can't support each codec's prefix if sound card had multi sub-devices
without this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Thu, 22 Nov 2018 00:55:54 +0000 (00:55 +0000)]
ASoC: audio-graph-scu-card: tidyup "prefix" parsing on Doc
audio-graph-scu-card.c is supporting "prefix" which is used to avoid
DAI naming conflict when CPU/Codec matching.
But, sound card might have multi sub-devices, and each codec might need
each prefix.
Now, ASoC is supporting snd_soc_of_parse_node_prefix(), let's support
it on audio-graph-scu-card, too. It is keeping existing DT style.
It can't support each codec's prefix if sound card had multi sub-devices
without this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Thu, 22 Nov 2018 00:55:40 +0000 (00:55 +0000)]
ASoC: simple-scu-card: tidyup "prefix" parsing
simple-scu-card.c is supporting "prefix" which is used to avoid
DAI naming conflict when CPU/Codec matching.
But, sound card might have multi sub-devices, and each codec might need
each prefix.
Now, ASoC is supporting snd_soc_of_parse_node_prefix(), let's support
it on audio-graph-scu-card, too. It is keeping existing DT style.
It can't support each codec's prefix if sound card had multi sub-devices
without this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Thu, 22 Nov 2018 00:55:24 +0000 (00:55 +0000)]
ASoC: simple-scu-card: tidyup "prefix" parsing on Doc
simple-scu-card.c is supporting "prefix" which is used to avoid
DAI naming conflict when CPU/Codec matching.
But, sound card might have multi sub-devices, and each codec might need
each prefix.
Now, ASoC is supporting snd_soc_of_parse_node_prefix(), let's support
it on audio-graph-scu-card, too. It is keeping existing DT style.
It can't support each codec's prefix if sound card had multi sub-devices
without this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Thu, 22 Nov 2018 00:55:09 +0000 (00:55 +0000)]
ASoC: soc-core: add snd_soc_of_parse_node_prefix()
Current ASoC has snd_soc_of_parse_audio_prefix() to get codec_conf
settings from DT which is used to avoid DAI naming conflict when
CPU/Codec matching.
Currently, it is parsing from "top node",
but, we want to parse from "each sub node" if sound card had multi
cpus/codecs.
This patch adds new snd_soc_of_parse_node_prefix() to allow parsing
settings from selected node.
It is keeping existing snd_soc_of_parse_audio_prefix() by using macro.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Vasily Khoruzhick [Thu, 22 Nov 2018 10:23:21 +0000 (18:23 +0800)]
ASoC: simple-amplifier: add VCC regulator widget
Amplifier may have assosicated regulator, so add a widget for it
and appropriate route.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Vasily Khoruzhick [Thu, 22 Nov 2018 10:23:20 +0000 (18:23 +0800)]
ASoC: dt-bindings: add regulator property to simple amplifier
Amplifier may have associated regulator, so add a property for it.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Chen-Yu Tsai [Thu, 22 Nov 2018 10:23:19 +0000 (18:23 +0800)]
ASoC: sunxi: sun50i-codec-analog: Add support for cpvdd regulator supply
On the Allwinner A64 SoCs, the audio codec has a built-in headphone
amplifier. This amplifier has a power supply separate from the rest of
the analog audio circuitry, labeled cpvdd.
This patch adds a DAPM widget for this supply, and ties it to the
headphone amp widget.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Chen-Yu Tsai [Thu, 22 Nov 2018 10:23:18 +0000 (18:23 +0800)]
ASoC: dt-bindings: sun50i-codec-analog: Add headphone amp regulator supply
On the Allwinner A64 SoC, the audio codec has a built-in headphone
amplifier. This amplifier has a power supply separate from the rest of
the analog audio circuitry.
Add a regulator supply property to handle this.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Wed, 21 Nov 2018 02:11:13 +0000 (02:11 +0000)]
ASoC: simple_card_utils: remove "option" from asoc_simple_card_of_parse_routing()
asoc_simple_card_of_parse_routing() had "option" parameter
to consider error handling, but it is very pointless parameter.
Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Wed, 21 Nov 2018 02:10:51 +0000 (02:10 +0000)]
ASoC: simple-card-utils: tidyup asoc_simple_card_parse_convert()
Current simple-card-utils has asoc_simple_card_parse_convert() to parse
convert channel/rate for be_hw_params_fixup.
But, it is parsing from top of node.
If sound card had multi subnode, we need to parse it from each sub node.
This patch tidyup asoc_simple_card_parse_convert() to allow parsing
settings from each node.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Wed, 21 Nov 2018 02:09:16 +0000 (02:09 +0000)]
ASoC: simple-card-utils: accept NULL parameter on asoc_simple_card_xxx()
If simple-card-utils accept NULL pointer on asoc_simple_card_xxx(),
each driver code will be more simple.
Let's accept NULL pointer.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Wed, 21 Nov 2018 02:08:59 +0000 (02:08 +0000)]
ASoC: simple-card-utils: remove asoc_simple_card_clk_register()
asoc_simple_card_clk_register() is used but only 1 user,
and very pointless code. Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Wed, 21 Nov 2018 08:15:30 +0000 (08:15 +0000)]
ASoC: rsnd: makes rsnd_ssi_is_dma_mode() static
ssi.c only is using rsnd_ssi_is_dma_mode().
Let's move it as static function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Wed, 21 Nov 2018 01:58:30 +0000 (01:58 +0000)]
ASoC: rsnd: tidyup rsnd_parse_connect_ssiu_compatible()
rsnd_parse_connect_ssiu_compatible() is doing
- using rsnd_ssiu_id(), but we use it via rsnd_mod_id()
- we can break loop if rsnd_dai_connect() was called
This patch fixup these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Hiroyuki Yokoyama [Wed, 21 Nov 2018 01:06:43 +0000 (01:06 +0000)]
ASoC: rsnd: Add device tree support for r8a77995
Simply document new compat strings.
There appears to be no need for a driver updates.
Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Rohit kumar [Fri, 16 Nov 2018 07:41:58 +0000 (13:11 +0530)]
ASoC: sdm845: Add support for Secondary MI2S interface
Add support to configure bit clock for secondary MI2S
TX interface.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Rohit kumar [Fri, 16 Nov 2018 07:41:57 +0000 (13:11 +0530)]
ASoC: sdm845: Update slot_width for Quaternary TDM port
Change slot_width for quaternary TDM port to 16 and
update bclk rate for TDM and MI2S interfaces
accordingly.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Sat, 17 Nov 2018 00:47:06 +0000 (18:47 -0600)]
ASoC: Intel: use platform_data for machine drivers
For some reason we have different mechanisms for passing data to
machine drivers. Use the solution used by Atom/SST and SOF instead of
using drv_data as done by Skylake.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Sat, 17 Nov 2018 00:47:05 +0000 (18:47 -0600)]
ASoC: Intel: fix interface for Chromebook machine drivers
The changes for HDaudio overlooked the fact that the machine drivers
used for Chromebooks rely on the dmic number information passed as
pdata.
Add dmic_num field to standard interface and use standard interface
instead of SKL-specific one.
Also clean-up pdata definition to remove fields that are no longer
used.
Fixes:
842bb5135f10 ('ASoC: Intel: use standard interface for Hdaudio machine driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Tue, 20 Nov 2018 12:42:53 +0000 (14:42 +0200)]
ASoC: tlv320aic3x: Add support for CBM_CFS and CBS_CFM clocking modes
The codec can support any variation of bclk/fs master/slave configuration.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cheng-Yi Chiang [Fri, 16 Nov 2018 09:28:56 +0000 (17:28 +0800)]
ASoC: rt5663: Fix error handling of regulator_set_load
The default implementation of regulator_set_load returns
REGULATOR_MODE_NORMAL, which is positive. [This was a bug which is
being fixed but the change is valid anyway -- bronie]
rt5663_i2c_probe should only do error handling when return value of
regulator_set_load is negative.
In this case, rt5663_i2c_probe should return error.
Also, consolidate err_irq into err_enable.
Fix the missing goto for temporary regmap and rt5663->regmap.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Colin Ian King [Fri, 16 Nov 2018 13:39:43 +0000 (13:39 +0000)]
ASoC: amd: fix spelling mistake "Inavlid" -> "Invalid"
There is a spelling mistake in a dev_err message. Fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Colin Ian King [Fri, 16 Nov 2018 15:06:36 +0000 (15:06 +0000)]
ASoC: qcom: clean up indentation, remove extraneous tab
The return statement is indented too much by one level, fix this by
removing the extraneous tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Colin Ian King [Fri, 16 Nov 2018 15:06:35 +0000 (15:06 +0000)]
ASoC: arizona: fix indentation issue with return statement
The return statement is indented incorrectly. Fix this by adding in
the missing tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Colin Ian King [Fri, 16 Nov 2018 15:06:34 +0000 (15:06 +0000)]
ASoC: tlv320dac33: clean up indentation, remove extraneous tab
The goto statement is indented too much by one level, fix this by
removing the extraneous tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Colin Ian King [Fri, 16 Nov 2018 15:06:33 +0000 (15:06 +0000)]
ASoC: tlv320aic31xx: asihpi: clean up indentation, remove extraneous tab
The return statement is indented too much by one level, fix this by
removing an extraneous tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Rob Herring [Fri, 16 Nov 2018 21:43:49 +0000 (15:43 -0600)]
ASoC: Convert a few more users to using %pOFn instead of device_node.name
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Olivier Moysan <olivier.moysan@st.com>
Cc: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cheng-Yi Chiang [Fri, 16 Nov 2018 02:12:43 +0000 (10:12 +0800)]
ASoC: rt5663: Add documentation for power supply support
rt5663 codec driver will support setting CPVDD and AVDD power supply
from device tree.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kirill Marinushkin [Thu, 15 Nov 2018 07:12:53 +0000 (08:12 +0100)]
ASoC: Add documentation for pcm3060 property out-single-ended
Output of pcm3060 codec may be configured as single-ended or differential
Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.tech>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cheng-Yi Chiang [Thu, 15 Nov 2018 04:13:34 +0000 (12:13 +0800)]
ASoC: rt5663: Add regulator support
Add regulator support to turn on cpvdd and avdd in probe.
If a regulator is not given from device tree, a dummy regulator will be
used.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Adrien Charruel [Wed, 14 Nov 2018 12:16:41 +0000 (13:16 +0100)]
ASoC: ak4118: Add support for AK4118 S/PDIF transceiver
The AK4118A is a digital audio transceiver supporting 8 input channels
at 192kHz and with 24bits resolution.
It converts the S/PDIF signal to I2S format and is configurable over I2C.
This driver introduce a minimal support of the AK4118, like selecting the
input channel, reading input frequency and detecting some errors.
Datasheet is available here:
https://www.akm.com/akm/en/file/datasheet/AK4118AEQ.pdf
Signed-off-by: Adrien Charruel <adrien.charruel@devialet.com>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Clément Péron [Wed, 14 Nov 2018 12:16:42 +0000 (13:16 +0100)]
ASoC: dt-bindings: add bindings for AK4118 transceiver
Document the bindings for AK4118 S/PDIF transceiver
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
YueHaibing [Thu, 15 Nov 2018 01:56:35 +0000 (01:56 +0000)]
ASoC: amd: remove set but not used variable 'dma_buffer'
Fixes gcc '-Wunused-but-set-variable' warning:
sound/soc/amd/raven/acp3x-pcm-dma.c: In function 'acp3x_dma_hw_params':
sound/soc/amd/raven/acp3x-pcm-dma.c:333:25: warning:
variable 'dma_buffer' set but not used [-Wunused-but-set-variable]
It never used since introduction in commit
8de1b5ed0337 ("ASoC: amd: add acp3x system resume pm op")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Vijendar Mukunda [Thu, 15 Nov 2018 16:13:50 +0000 (21:43 +0530)]
ASoC: amd: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license
compliance management.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Vijendar Mukunda [Thu, 15 Nov 2018 16:13:49 +0000 (21:43 +0530)]
ASoC: amd: Fixed build errors
Fixed build errors.
- Implicit declaration of pci_enable_msi() & pci_disable_msi()
api's for openrisc architecture.
- type defaults to 'int' in declaration of 'module_pci_driver'
Enabled build for x86 architecture.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com>
Tested-by: Ravulapati Vishnu vardhan Rao <Vishnuvardhanrao.Ravulapati@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
David Lin [Thu, 15 Nov 2018 09:49:13 +0000 (17:49 +0800)]
ASoC: nau8822: convert to SPDX identifiers
This patch fixes typo in the comment.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
David Lin [Thu, 15 Nov 2018 09:14:47 +0000 (17:14 +0800)]
ASoC: nau8822: convert to SPDX identifiers
This patch updates license to SPDX-License-Identifier
instead of verbose license text.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Colin Ian King [Wed, 14 Nov 2018 21:31:48 +0000 (21:31 +0000)]
ASoC: amd: fix memory leak of i2s_data on error return
Currently when snd_pcm_hw_constraint_integer fails there is
a memory leak of i2s_data on the error return path. Fix this by
kfree'ing i2s_data before returning.
Detected by CoverityScan, CID#
1475479 ("Resource leak")
Fixes:
0b87d6bcd648 ("ASoC: amd: add acp3x pcm driver dma ops")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kirill Marinushkin [Mon, 12 Nov 2018 07:08:33 +0000 (08:08 +0100)]
ASoC: pcm3060: Add DT property for single-ended output
DAC output may be differential (default) or single-ended.
Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.tech>
Signed-off-by: Mark Brown <broonie@kernel.org>
Wei Yongjun [Sat, 27 Oct 2018 02:19:59 +0000 (02:19 +0000)]
ASoC: stm32: sai: fix invalid use of sizeof in stm32_sai_add_mclk_provider()
sizeof() when applied to a pointer typed expression gives the
size of the pointer, not that of the pointed data.
Fixes:
8307b2afd386 ("ASoC: stm32: sai: set sai as mclk clock provider")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Vijendar Mukunda [Mon, 12 Nov 2018 05:35:02 +0000 (11:05 +0530)]
ASoC: amd: enable acp3x drivers build
ACP3x drivers can be built by selecting necessary kernel config option.
The patch enables build support of the same.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Tested-by: Ravulapati Vishnu vardhan Rao <Vishnuvardhanrao.Ravulapati@amd.com>
Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Vijendar Mukunda [Mon, 12 Nov 2018 05:35:01 +0000 (11:05 +0530)]
ASoC: amd: add acp3x system resume pm op
When system wide suspend happens, ACP will be powered off.
When system resumes, all the runtime configuration data for
ACP needs to be programmed again.
Added 'resume'pm call back to ACP pm ops.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Tested-by: Ravulapati Vishnu vardhan Rao <Vishnuvardhanrao.Ravulapati@amd.com>
Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Vijendar Mukunda [Mon, 12 Nov 2018 05:35:00 +0000 (11:05 +0530)]
ASoC: amd: add acp3x runtime pm ops
Added runtime PM operations for ACP3x PCM platform device.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Tested-by: Ravulapati Vishnu vardhan Rao <Vishnuvardhanrao.Ravulapati@amd.com>
Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Vijendar Mukunda [Mon, 12 Nov 2018 05:34:59 +0000 (11:04 +0530)]
ASoC: amd: add acp3x tdm mode support
ACP3x I2S (CPU DAI) can act in normal I2S and TDM modes.
Added support for TDM mode.
Desired mode can be selected from ASoC machine driver.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Tested-by: Ravulapati Vishnu vardhan Rao <Vishnuvardhanrao.Ravulapati@amd.com>
Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Vijendar Mukunda [Mon, 12 Nov 2018 05:34:58 +0000 (11:04 +0530)]
ASoC: amd: add acp3x i2s ops
ACP3x has a i2s controller block for playback and capture.
This patch adds ACP3x i2s DAI operations.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Tested-by: Ravulapati Vishnu vardhan Rao <Vishnuvardhanrao.Ravulapati@amd.com>
Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Vijendar Mukunda [Mon, 12 Nov 2018 05:34:57 +0000 (11:04 +0530)]
ASoC: amd: add acp3x pcm driver dma ops
ACP3x has a DMA controller to access system memory.
This controller transfers data from/to system memory
to/from the ACP internal FIFO.
The patch adds PCM driver DMA operations.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Tested-by: Ravulapati Vishnu vardhan Rao <Vishnuvardhanrao.Ravulapati@amd.com>
Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Vijendar Mukunda [Mon, 12 Nov 2018 05:34:56 +0000 (11:04 +0530)]
ASoC: amd: Interrupt handler changes for ACP3x DMA driver
Whenever audio data equal to the I2S FIFO watermark level are
produced/consumed, interrupt is generated.
Acknowledge the interrupt.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Tested-by: Ravulapati Vishnu vardhan Rao <Vishnuvardhanrao.Ravulapati@amd.com>
Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Vijendar Mukunda [Mon, 12 Nov 2018 05:34:55 +0000 (11:04 +0530)]
ASoC: amd: add ACP3x PCM platform driver
PCM platform driver binds to the platform device created by ACP3x PCI
device. PCM driver registers ALSA DMA and CPU DAI components with ASoC
framework.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Tested-by: Ravulapati Vishnu vardhan Rao <Vishnuvardhanrao.Ravulapati@amd.com>
Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Vijendar Mukunda [Mon, 12 Nov 2018 05:34:54 +0000 (11:04 +0530)]
ASoC: amd: create ACP3x PCM platform device
ACP 3x IP has I2S controller device as one of IP blocks.
Create a platform device for it, so that the PCM platform driver
can be bound to this device. Pass PCI resources like MMIO, irq
to the platform device.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Tested-by: Ravulapati Vishnu vardhan Rao <vishnuvardhanrao.ravulapati@amd.com>
Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Maruthi Srinivas Bayyavarapu [Mon, 12 Nov 2018 05:34:53 +0000 (11:04 +0530)]
ASoC: AMD: add ACP3.0 PCI driver
ACP 3.0 is a PCI audio device. This patch adds PCI driver to bind
to this device and get PCI resources.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Signed-off-by: Sanju R Mehta <sanju.mehta@amd.com>
Tested-by: Ravulapati Vishnu vardhan Rao <Vishnuvardhanrao.Ravulapati@amd.com>
Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Maruthi Srinivas Bayyavarapu [Mon, 12 Nov 2018 05:34:52 +0000 (11:04 +0530)]
ASoC: AMD: add ACP 3.x IP register header
ACP 3.x is a new audio block in raven. Added register header
of the same.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Signed-off-by: Vijendar Mukunda <vijendar.mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Bard liao [Sat, 10 Nov 2018 21:18:46 +0000 (05:18 +0800)]
ASoC: Intel: hdac_hdmi: add Icelake support
Add Icelake device id. Also, Icelake's pin2port mapping table is
complicated. So we use a mapping table to do the pin2port mapping.
Signed-off-by: Bard liao <bard.liao@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Richard Fitzgerald [Mon, 12 Nov 2018 13:36:39 +0000 (13:36 +0000)]
ASoC: wm_adsp: Factor out common init code
Factor out the duplicated initialization statements from
wm_adsp1_init() and wm_adsp2_init() into new function
wm_adsp_common_init().
The entire content of wm_adsp1_init() is the common code
but it is convenient to retain this exported function
to hide what we currently treat as common init (which might
change in the future) and also make clear the difference
between an ADSP1 entry point and common code.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Thu, 8 Nov 2018 07:30:00 +0000 (09:30 +0200)]
ASoC: omap-mcbsp: No need to initialize max_xx_thres when it is not used
Initializing to -EINVAL is not correct as the variables are unsigned and
if buffer_size is 0 then they are not used anyway.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Thu, 8 Nov 2018 07:29:59 +0000 (09:29 +0200)]
ASoC: omap-mcbsp: Remove redundant check for mcbsp->pdata
The driver will not probe if the pdata is not provided or created.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>