net: x25: Use list_for_each_entry() to simplify code in x25_route.c

Convert list_for_each() to list_for_each_entry() where
applicable. This simplifies the code.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mt76: mt7615: Use devm_platform_get_and_ioremap_resource()

Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mido: mdio-mux-bcm-iproc: Use devm_platform_get_and_ioremap_resource()

Use devm_platform_get_and_ioremap_resource() to simplify
code and avoid a null-ptr-deref by checking 'res' in it.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Fix mixed enum type warning

The commit 5a5586112b92 ("net: stmmac: support FPE link partner
hand-shaking procedure") introduced the following coverity warning:

  "Parse warning (PW.MIXED_ENUM_TYPE)"
  "1. mixed_enum_type: enumerated type mixed with another type"

This is due to both "lo_state" and "lp_sate" which their datatype are
enum stmmac_fpe_state type, and being assigned with "FPE_EVENT_UNKNOWN"
which is a macro-defined of 0. Fixed this by assigned both these
variables with the correct enum value.

Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fjes: check return value after calling platform_get_resource()

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: axienet: Use devm_platform_get_and_ioremap_resource()

Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: w5100: Use devm_platform_get_and_ioremap_resource()

Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ixp4xxx_hss-cleanups'

Peng Li says:

====================
net: ixp4xx_hss: clean up some code style issues

This patchset clean up some code style issues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ixp4xx_hss: add braces {} to all arms of the statement

Braces {} should be used on all arms of this statement.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ixp4xx_hss: fix the comments style issue

Networking block comments don't use an empty /* line,
use /* Comment...

Block comments use * on subsequent lines.
Block comments use a trailing */ on a separate line.

This patch fixes the comments style issues.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ixp4xx_hss: remove redundant spaces

According to the chackpatch.pl,
space prohibited after that open parenthesis '('.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ixp4xx_hss: add some required spaces

Add space required before the open parenthesis '('.
Add space required after that close brace '}'.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ixp4xx_hss: move out assignment in if condition

Should not use assignment in if condition.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ixp4xx_hss: fix the code style issue about "foo* bar"

Fix the checkpatch error as "foo* bar" and should be "foo *bar",
and "(foo*)" should be "(foo *)".

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ixp4xx_hss: add blank line after declarations

This patch fixes the checkpatch error about missing a blank line
after declarations.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ixp4xx_hss: remove redundant blank lines

This patch removes some redundant blank lines.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc:subscr.c: fix a spelling mistake

Fix a spelling mistake.

Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: socket.c: fix the use of copular verb

Fix the use of copular verb.

Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

node.c: fix the use of indefinite article

Fix the use of indefinite article.

Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_unix: remove the repeated word "and"

Remove the repeated word "and".

Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vsock/vmci: remove the repeated word "be"

Remove the repeated word "be".

Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mlx5-updates-2021-06-09' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2021-06-09

Introduce steering header insert/remove and switchdev bridge offloads

1) From Yevgeny, Steering header insert/remove support

ConnectX supports offloading of various encapsulations and decapsulations
(e.g. VXLAN), which are performed by 'Packet Reformat' action.
Starting with ConnectX-6 DX, a new reformat type is supported - INSERT_HEADER.
This reformat allows inserting an arbitrary size buffer at a selected location
in the packet on RX flows.

The insert/remove header support are needed as a prerequisite for the
bridge offloads vlan pop/push supprt, see below.

2) From Vlad, Support for bridge offloads for switchdev mode

This change implements bridge offloads with VLAN-support that works on top
of mlx5 representors in switchdev mode.

HIGH-LEVEL OVERVIEW

Hardware supported by mlx5 driver doesn't provide dynamic learning or aging
functionality and requires the driver to emulate all switch-like behavior
in software. As such, all packets by default go through miss path, appear
on representor and get to software bridge, if it is the upper device of the
representor. This causes bridge to process packet in software, learn the
MAC address to FDB and send SWITCHDEV_FDB_ADD_TO_DEVICE event to all
subscribers. Upon reception of SWITCHDEV_FDB_ADD_TO_DEVICE notification
mlx5 bridge offloads the FDB to hardware and sends back
SWITCHDEV_FDB_ADD_TO_BRIDGE notification to prevent such entries from being
aged out by kernel bridge. Leaving aging to kernel bridge would result
deletion of offloaded dynamic FDB entries every aging_time period due to
packets being processed by hardware and, consecutively, 'used' timestamp
for FDB entry not being updated. Hardware aging is emulated in driver by
running periodic workqueue task that manually updates the rules according
to their hardware counter:

- If hardware counter has changed since last update, the handler updates
'used' timestamp in kernel bridge dynamic entry by sending
SWITCHDEV_FDB_ADD_TO_BRIDGE notification for the entry.

- If FDB entry wasn't updated for user-controllable aging_time period,
then the FDB entry is unoffloaded from hardware and corresponding
SWITCHDEV_FDB_DEL_TO_BRIDGE notification is sent to kernel bridge.

The mlx5 bridge offload implementation fully supports port VLAN objects,
including PVID (vlan push) and "Egress Untagged" (vlan pop).

SOFTWARE ARCHITECTURE

Mlx5_eswitch is extended with pointer to new mlx5_esw_bridge_offloads
structure which has a linked list of mlx5_esw_bridge objects. Struct
mlx5_esw_bridge is the main switch object in mlx5 that holds all data for
offloaded FDB entries and metadata for bridge ports and their vlans. The
mlx5_esw_bridge object is created when first representor of eswitch vport
is added to bridge and deleted when the last representor is detached from
it. Bridge FDB entries are saved in linked list (to iterate over all FDB
entries in aging workqueue task) and also in hashtable for quick lookup by
MAC+VLAN tuple. Bridge FDB entries are saved in linked list (to iterate
over all FDB entries in aging workqueue task) and in hashtable for quick
lookup by MAC+VLAN tuple. Port metadata is stored in struct
mlx5_esw_bridge_port that is saved in xarray to allow quick lookup by vport
number. Part of the port metadata is the set of port vlans that are
represented by mlx5_esw_bridge_vlan structure. The vlan structure points to
all FDBs on vlan/port via fdb_list linked list.

Simplified diagram of mlx5 bridge objects:

                      +------------------+
                      |  mxl5_eswitch    |
                      |                  |
                      |  br_offloads     |
                      +--------+---------+
                               |
                      +--------v-------------------+
                      |  mlx5_esw_bridge_offloads  |
                      |                            |
                   +-->  bridges                   |
                   |  +-------+--------------------+
                   |          |
                   |          |
                   |      +---v---------------+
                   |      | mlx5_esw_bridge   |
                   |      |                   |
                   |      | vports            |
                   |      |                   |
                   |      | fdb_ht            |
                   |      +---+---------------+
                   |          |
                   |      +---v---------------+
                   +------+ mlx5_esw_bridge   |
                          |                   |
+-------------------------+ vports            |
|                         |                   |
|                         | fdb_ht            +------------------------------------------+
|                         +-------------------+                                          |
|                                                                                        |
|                                                                                        |
| +----------------------+                                 +---------------------------+ |
+-> mlx5_esw_bridge_port |                              +--> mlx5_esw_bridge_fdb_entry <-+
| |                      |    +----------------------+  |  +--+------------------------+ |
| | vlans                +--+-> mlx5_esw_bridge_vlan |  |     |                          |
| |                      |  | |                      |  |  +--v------------------------+ |
| +----------------------+  | | fdb_list             +--+  | mlx5_esw_bridge_fdb_entry <-+
|                           | +-------^--------------+     +--+------------------------+ |
| +----------------------+  |         |                       |                          |
+-> mlx5_esw_bridge_port |  |         +-----------------------+                          |
  |                      |  |                                                            |
  | vlans                |  | -----------------------+                                   |
  |                      |  +-> mlx5_esw_bridge_vlan |                                   |
  +----------------------+    |                      |     +---------------------------+ |
                              | fdb_list             +-----> mlx5_esw_bridge_fdb_entry <-+
                              +-------^--------------+     +--+------------------------+
                                      |                       |
                                      +-----------------------+

HARDWARE REPRESENTATION

In order to adhere to kernel software datapath model bridge offloads must
come after TC and NF FDBs. However, since netfilter offload in mlx5 is
implemented with unmanaged tables, its miss path is not automatically
connected to next priority and requires the code to manually connect with
slow table. To keep bridge offloads encapsulated and not mix it with
eswitch offloads new FDB_TC_MISS priority is created between FDB_FT_OFFLOAD
and FDB_SLOW_PATH which allows bridge offloads to be created without
exposing its internal tables to any other modules since miss path of
managed TC-miss table is automatically wired to next priority.

The bridge tables are created with new priority FDB_BR_OFFLOAD in FDB
namespace. The new priority is between tc-miss and slow path priorities.
Priority consist of two levels: the ingress table that is global per
eswitch and matches incoming packets by src_mac/vid and redirects them to
next level (egress table) that is chosen according to ingress port bridge
membership and matches on dst_mac/vid in order to redirect packet to vport
according to the following diagram:

                +
                |
      +---------v----------+
      |                    |
      |   FDB_TC_OFFLOAD   |
      |                    |
      +---------+----------+
                |
                |
      +---------v----------+
      |                    |
      |   FDB_FT_OFFLOAD   |
      |                    |
      +---------+----------+
                |
                |
      +---------v----------+
      |                    |
      |    FDB_TC_MISS     |
      |                    |
      +---------+----------+
                |
+--------------------------------------+
|               |                      |
|        +------+                      |
|        |                             |
| +------v--------+   FDB_BR_OFFLOAD   |
| | INGRESS_TABLE |                    |
| +------+---+----+                    |
|        |   |      match              |
|        |   +---------+               |
|        |             |               |    +-------+
|        |     +-------v-------+ match |    |       |
|        |     | EGRESS_TABLE  +------------> vport |
|        |     +-------+-------+       |    |       |
|        |             |               |    +-------+
|        |    miss     |               |
|        +------+------+               |
|               |                      |
+--------------------------------------+
                |
                |
      +---------v----------+
      |                    |
      |   FDB_SLOW_PATH    |
      |                    |
      +---------+----------+
                |
                v

PATCHES OVERVIEW

1-3 - Miscellaneous refactorings and infrastructure changes.

4 - Mlx5 bridge offload infrastructure and dedicated fs_core
namespace/tables implementation.

5 - FDB entry offload.

6 - Dynamic FDB entry aging.

7-10 - VLAN filtering offload.

11 - Tracepoints for main mlx5 bridge offload events (FDB entry
offload/unoffload, VLAN add/delete, etc.)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
--

net: davinci_emac: Use devm_platform_get_and_ioremap_resource()

Use devm_platform_get_and_ioremap_resource() to simplify
code and avoid a null-ptr-deref by checking 'res' in it.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpsw: Use devm_platform_get_and_ioremap_resource()

Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: probe for C45 PHYs that return PHY ID of zero in C22 space

PHY devices such as the Marvell Alaska 88E2110 does not return a valid
PHY ID when probed using Clause-22. The current implementation treats
PHY ID of zero as a non-error and valid PHY ID, and causing the PHY
device failed to bind to the Marvell driver.

For such devices, we do an additional probe in the Clause-45 space,
if a valid PHY ID is returned, we then proceed to attach the PHY
device to the matching PHY ID driver.

Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

netlink: simplify NLMSG_DATA with NLMSG_HDRLEN

The NLMSG_LENGTH(0) may confuse the API users,
NLMSG_HDRLEN is much more clear.

Besides, some code style problems are also fixed.
Signed-off-by: Chen Li <chenli@uniontech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5: Bridge, add tracepoints

Move private bridge structures to dedicated headers that is accessible to
bridge tracepoint header. Implemented following tracepoints:

- Initialize FDB entry.
- Refresh FDB entry.
- Cleanup FDB entry.
- Create VLAN.
- Cleanup VLAN.
- Attach port to bridge.
- Detach port from bridge.

Usage example:

># cd /sys/kernel/debug/tracing
># echo mlx5:mlx5_esw_bridge_fdb_entry_init >> set_event
># cat trace
...
   kworker/u20:1-96      [001] ....   231.892503: mlx5_esw_bridge_fdb_entry_init: net_device=enp8s0f0_0 addr=e4:fd:05:08:00:02 vid=3 flags=0 lastuse=4294895695

Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Bridge, filter tagged packets that didn't match tagged fg

With support for pvid vlans in mlx5 bridge it is possible to have rules in
untagged flow group when vlan filtering is enabled. However, such rules can
also match tagged packets that didn't match anything in tagged flow group.
Filter such packets by introducing additional flow group between tagged and
untagged groups. When filtering is enabled on the bridge create additional
flow in vlan filtering flow group and matches tagged packets with specified
source MAC address and redirects them to new "skip" table. The skip table
is new lowest-level empty table that is used to skip all further processing
on packet in bridge priority.

Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Bridge, support pvid and untagged vlan configurations

Implement support for pushing vlan header into untagged packet on ingress
of port that has pvid configured and support for popping vlan on egress of
port that has the matching vlan configured as untagged. To support such
configurations packet reformat contexts of {INSERT|REMOVE}_HEADER types are
created per such vlan and saved to struct mlx5_esw_bridge_vlan which allows
all FDB entries on particular vlan to share single packet reformat
instance. When initializing FDB entries with pvid or untagged vlan type set
its mlx5_flow_act->pkt_reformat action accordingly.

Flush all flows when removing vlan from port. This is necessary because
even though software bridge removes all FDB entries before removing their
vlan, mlx5 bridge implementation deletes their corresponding flow entries
from hardware in asynchronous workqueue task, which will cause firmware
error if vlan packet reformat context is deleted before all flows that
point to it.

Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Bridge, match FDB entry vlan tag

Add support for FDB vlan-tagged entries. Extend ingress and egress flow
tables with flow groups to match packet vlan tag. Modify the flow creation
code to include vlan tag, if vlan is configured on port and vlan
configuration is supported for offload.

Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Bridge, implement infrastructure for vlans

Establish all the necessary infrastructure for implementing vlan matching
and vlan push/pop in following patches:

- Add new per-vport struct mlx5_esw_bridge_port that is used to store
metadata for all port vlans. Initialize and cleanup the instance of the
structure when port representor is linked/unliked to bridge. Use xarray to
allow quick vport metadata lookup by vport number.

- Add new per-port-vlan struct mlx5_esw_bridge_vlan that is used to store
vlan-specific data (vid, flags). Handle SWITCHDEV_PORT_OBJ_{ADD|DEL}
switchdev blocking event for SWITCHDEV_OBJ_ID_PORT_VLAN object by
creating/deleting the vlan structure and saving it in per-vport xarray for
quick lookup.

- Implement support for SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING object
attribute that is used to toggle vlan filtering. Remove all FDB entries
from hardware when vlan filtering state is changed.

Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Bridge, dynamic entry ageing

Dynamic FDB entries require capability to age out unused entries. Such
entries are either aged out by kernel software bridge implementation or by
hardware switch that offloaded them (and notified the kernel to mark them
as SWITCHDEV_FDB_ADD_TO_BRIDGE). Leaving ageing to kernel bridge would
result it deleting offloaded dynamic FDB entries every ageing_time period
due to packets being processed by hardware and, consecutively, 'used'
timestamp for FDB entry not being updated. However, since hardware doesn't
support ageing, software solution inside the driver is required.

In order to emulate hardware ageing in driver, extend bridge FDB ingress
flows with counter and create delayed br_offloads->update_work task on
bridge offloads workqueue. Run the task every second, update 'used'
timestamp in software bridge dynamic entry by sending
SWITCHDEV_FDB_ADD_TO_BRIDGE for the entry, if it flow hardware counter
lastuse field was changed since last update. If lastuse wasn't changed for
ageing_time period, then delete the FDB entry and notify kernel bridge by
sending SWITCHDEV_FDB_DEL_TO_BRIDGE notification.

Register blocking switchdev notifier callback and handle attribute set
SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME event to allow user to dynamically
configure bridge FDB entry ageing timeout. Save the value per-bridge in
struct mlx5_esw_bridge. Silently ignore
SWITCHDEV_ATTR_ID_PORT_{PRE_}BRIDGE_FLAGS switchdev event since mlx5 bridge
implementation relies on software bridge for implementing necessary
behavior for all of these flags.

Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Bridge, handle FDB events

Hardware supported by mlx5 driver doesn't provide learning and requires the
driver to emulate all switch-like behavior in software. As such, all
packets by default go through miss path, appear on representor and get to
software bridge, if it is the upper device of the representor. This causes
bridge to process packet in software, learn the MAC address to FDB and send
SWITCHDEV_FDB_ADD_TO_DEVICE event to all subscribers.

In order to offload FDB entries in mlx5, register switchdev notifier
callback and implement support for both 'added_by_user' and dynamic FDB
entry SWITCHDEV_FDB_ADD_TO_DEVICE events asynchronously using new
mlx5_esw_bridge_offloads->wq ordered workqueue. In workqueue callback
offload the ingress rule (matching FDB entry MAC as packet source MAC) and
egress table rule (matching FDB entry MAC as destination MAC). For ingress
table rule also match source vport to ensure that only traffic coming from
expected bridge port is matched by offloaded rule. Save all the relevant
FDB entry data in struct mlx5_esw_bridge_fdb_entry instance and insert the
instance in new mlx5_esw_bridge->fdb_list list (for traversing all entries
by software ageing implementation in following patch) and in new
mlx5_esw_bridge->fdb_ht hash table for fast retrieval. Notify the bridge
that FDB entry has been offloaded by sending SWITCHDEV_FDB_OFFLOADED
notification.

Delete FDB entry on reception of SWITCHDEV_FDB_DEL_TO_DEVICE event.

Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Bridge, add offload infrastructure

Create new files bridge.{c|h} in en/rep directory that implement bridge
interaction with representor netdevices and handle required
events/notifications, bridge.{c|h} in esw directory that implement all
necessary eswitch offloading infrastructure and works on vport/eswitch
level. Provide new kconfig MLX5_BRIDGE which is automatically selected when
both kernel bridge and mlx5 eswitch configs are enabled.

Provide basic infrastructure for bridge offloads:

- struct mlx5_esw_bridge_offloads - per-eswitch bridge offload structure
that encapsulates generic bridge-offloads data (notifier blocks, ingress
flow table/group, etc.) that is created/deleted on enable/disable eswitch
offloads.

- struct mlx5_esw_bridge - per-bridge structure that encapsulates
per-bridge data (reference counter, FDB, egress flow table/group, etc.)
that is created when first eswitch represetor is attached to new bridge and
deleted when last representor is removed from the bridge as a result of
NETDEV_CHANGEUPPER event.

The bridge tables are created with new priority FDB_BR_OFFLOAD in FDB
namespace. The new priority is between tc-miss and slow path priorities.
Priority consist of two levels: the ingress table that is global per
eswitch and matches incoming packets by src_mac/vid and redirects them to
next level (egress table) that is chosen according to ingress port bridge
membership and matches on dst_mac/vid in order to redirect packet to vport
according to the following diagram:

                +
                |
      +---------v----------+
      |                    |
      |   FDB_TC_OFFLOAD   |
      |                    |
      +---------+----------+
                |
                |
      +---------v----------+
      |                    |
      |   FDB_FT_OFFLOAD   |
      |                    |
      +---------+----------+
                |
                |
      +---------v----------+
      |                    |
      |    FDB_TC_MISS     |
      |                    |
      +---------+----------+
                |
+--------------------------------------+
|               |                      |
|        +------+                      |
|        |                             |
| +------v--------+   FDB_BR_OFFLOAD   |
| | INGRESS_TABLE |                    |
| +------+---+----+                    |
|        |   |      match              |
|        |   +---------+               |
|        |             |               |    +-------+
|        |     +-------v-------+ match |    |       |
|        |     | EGRESS_TABLE  +------------> vport |
|        |     +-------+-------+       |    |       |
|        |             |               |    +-------+
|        |    miss     |               |
|        +------+------+               |
|               |                      |
+--------------------------------------+
                |
                |
      +---------v----------+
      |                    |
      |   FDB_SLOW_PATH    |
      |                    |
      +---------+----------+
                |
                v

Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Refactor mlx5e_eswitch_{*}rep() helpers

Change the helper to functions to accept constant pointer to struct
net_device. This is necessary for following patches in series that pass
mlx5e_eswitch_rep() as a callback to kernel bridge infrastructure code.

Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Create TC-miss priority and table

In order to adhere to kernel software datapath model bridge offloads must
come after TC and NF FDBs. Following patches in this series add new FDB
priority for bridge after FDB_FT_OFFLOAD. However, since netfilter offload
is implemented with unmanaged tables, its miss path is not automatically
connected to next priority and requires the code to manually connect with
slow table. To keep bridge offloads encapsulated and not mix it with
eswitch offloads, create a new FDB_TC_MISS priority between FDB_FT_OFFLOAD
and FDB_SLOW_PATH:

          +
          |
+---------v----------+
|                    |
|   FDB_TC_OFFLOAD   |
|                    |
+---------+----------+
          |
          |
          |
+---------v----------+
|                    |
|   FDB_FT_OFFLOAD   |
|                    |
+---------+----------+
          |
          |
          |
+---------v----------+
|                    |
|    FDB_TC_MISS     |
|                    |
+---------+----------+
          |
          |
          |
+---------v----------+
|                    |
|   FDB_SLOW_PATH    |
|                    |
+---------+----------+
          |
          v

Initialize the new priority with single default empty managed table and use
the table as TC/NF miss patch instead of slow table. This approach allows
bridge offloads to be created as new FDB namespace priority between
FDB_TC_MISS and FDB_SLOW_PATH without exposing its internal tables to any
other modules since miss path of managed TC-miss table is automatically
wired to next priority.

Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: DR, Support EMD tag in modify header for STEv1

Add support for EMD tag in modify header set/copy actions
on device that supports STEv1.

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: DR, Added support for INSERT_HEADER reformat type

Add support for INSERT_HEADER packet reformat context type

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Added new parameters to reformat context

Adding new reformat context type (INSERT_HEADER) requires adding two new
parameters to reformat context - reformat_param_0 and reformat_param_1.
As defined by HW spec, these parameters have different meaning for
different reformat context type.

The first parameter (reformat_param_0) is not new to HW spec, but it
wasn't used by any of the supported reformats. The second parameter
(reformat_param_1) is new to the HW spec - it was added to allow
supporting INSERT_HEADER.

For NSERT_HEADER, reformat_param_0 indicates the header used to
reference the location of the inserted header, and reformat_param_1
indicates the offset of the inserted header from the reference point
defined by reformat_param_0.

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: DR, Allow encap action for RX for supporting devices

Encap actions on RX flow were not supported on older devices.
However, this is no longer the case in devices that support STEv1.
This patch adds support for encap l3/l2 on RX flow for supported
devices: update actions state machine by adding the newely supported
transitions and add the required support in STEv0/1 files.
The new transitions that are supported are:
 - from decap/modify-header/pop-vlan to encap
 - from encap to termination table

Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: DR, Split reformat state to Encap and Decap

Split single reformat state into two separate states for encap and decap.
This will allow adding actions to the specific domain, such as encap on RX.

Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: mlx5_ifc support for header insert/remove

Add support for HCA caps 2 that contains capabilities for the new
insert/remove header actions.

Added the required definitions for supporting the new reformat type:
added packet reformat parameters, reformat anchors and definitions
to allow copy/set into the inserted EMD (Embedded MetaData) tag.

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Merge branch 'ipa-mem-1'

Alex Elder says:

====================
net: ipa: memory region rework, part 1

This is the first portion of a very long series of patches that has
been split in two.  Once these patches are accepted, I'll post the
remaining patches.

The combined series reworks the way memory regions are defined in
the configuration data, and in the process solidifies code that
ensures configurations are valid.

In this portion (part 1), most of the focus is on improving
validation of code.  This validation is now done unconditionally
(something I promised Leon Romanovsky I would work on).  Validation
will occur earlier than before, catching configuration problems as
early as possible and permitting the rest of the driver to avoid
needing to do some error checking.  There will now be checks to
ensure all defined regions are supported by the hardware, that
required regions are all defined, and that there are no duplicate
regions.

The second portion (part 2) is mainly a set of small but pervasive
changes whose result is to have the memory region array not be
indexed by region ID.  I'll provide further explanation when I post
that series.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: use bitmap to check for missing regions

In ipa_mem_valid(), wait until regions have been marked in the memory
region bitmap, and check all that are not found there to ensure they
are not required.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: flag duplicate memory regions

Add a test in ipa_mem_valid() to ensure no memory region is defined
more than once, using a bitmap to record each defined memory region.
Skip over undefined regions when checking (we can have any number of
those).

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: validate memory regions based on version

Introduce ipa_mem_id_valid(), and use it to check defined memory
regions to ensure they are valid for a given version of IPA.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: introduce ipa_mem_id_optional()

Introduce a new function that indicates whether a given memory
region is required for a given version of IPA hardware.  Use it to
verify that all required regions are present during initialization.

Reorder the definitions of the memory region IDs to be based on
the version in which they're first defined.  Use "+" rather than
"and above" where defining the IPA versions in which memory IDs are
used, and indicate which regions are optional (many are not).

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: pass memory configuration data to ipa_mem_valid()

Pass the memory configuration data array to ipa_mem_valid() for
validation, and use that rather than assuming it's already been
recorded in the IPA structure.  Move the memory data array size
check into ipa_mem_valid().

Call ipa_mem_valid() early in ipa_mem_init(), and only proceed with
assigning the memory array pointer and size if it is found to be
valid.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: validate memory regions at init time

Move the memory region validation check so it happens earlier when
initializing the driver, at init time rather than config time (i.e.,
before access to hardware is required).

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: separate region range check from other validation

The only thing done by ipa_mem_valid_one() that requires hardware
access is the check for whether all regions fit within the size of
IPA local memory specified by an IPA register.

Introduce ipa_mem_size_valid() to implement this verification and
stop doing so in ipa_mem_valid_one().  Call the new function from
ipa_mem_config() (which is also the caller of ipa_mem_valid()).

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: separate memory validation from initialization

Currently, memory regions are validated in the loop that initializes
them.  Instead, validate them separately.

Rename ipa_mem_valid() to be ipa_mem_valid_one().  Define a *new*
function named ipa_mem_valid() that performs validation of the array
of memory regions provided.  This function calls ipa_mem_valid_one()
for each region in turn.

Skip validation for any "empty" region descriptors, which have zero
size and are not preceded by any canary values.  Issue a warning for
such descriptors if the offset is non-zero.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: validate memory regions unconditionally

Do memory region descriptor validation unconditionally, rather than
having it depend on IPA_VALIDATION being defined.

Pass the address of a memory region descriptor rather than a memory
ID to ipa_mem_valid().

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: store memory region id in descriptor

Store the memory region ID in the memory descriptor structure.  This
is a move toward *not* indexing the array by the ID, but for now we
must still specify those index values.  Define an explicitly
undefined region ID, value 0, so uninitialized entries in the array
won't use an otherwise valid ID.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipa: define IPA_MEM_END_MARKER

Define a new pseudo memory region identifer that specifies the
offset at the end of IPA resident memory.  Use it instead of
IPA_MEM_UC_EVENT_RING in places where the size of that region was
defined to be 0.

The size of the IPA_MEM_END_MARKER pseudo region must be zero.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: sja1105: Fix assigned yet unused return code rc

The return code variable rc is being set to return error values in two
places in sja1105_mdiobus_base_tx_register and yet it is not being
returned, the function always returns 0 instead. Fix this by replacing
the return 0 with the return code rc.

Addresses-Coverity: ("Unused value")
Fixes: 5a8f09748ee7 ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac: prefetch right address

To support XDP, a headroom is prepended to the packet data.
Consider this offset when doing a prefetch.

Fixes: da5ec7f22a0f ("net: stmmac: refactor stmmac_init_rx_buffers for stmmac_reinit_rx_buffers")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: thermal: Fix null dereference of NULL temperature parameter

The call to mlxsw_thermal_module_temp_and_thresholds_get passes a NULL
pointer for the temperature and this can be dereferenced in this function
if the mlxsw_reg_query call fails.  The simplist fix is to pass the
address of dummy temperature variable instead of a NULL pointer.

Addresses-Coverity: ("Explicit null dereferenced")
Fixes: 72a64c2fe9d8 ("mlxsw: thermal: Read module temperature thresholds using MTMP register")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: rmnet: Always subtract MAP header

Commit e1d9a90a9bfd ("net: ethernet: rmnet: Support for ingress MAPv5
checksum offload") broke ingress handling for devices where
RMNET_FLAGS_INGRESS_MAP_CKSUMV5 or RMNET_FLAGS_INGRESS_MAP_CKSUMV4 are
not set. Unless either of these flags are set, the MAP header is not
removed. This commit restores the original logic by ensuring that the
MAP header is removed for all MAP packets.

Fixes: e1d9a90a9bfd ("net: ethernet: rmnet: Support for ingress MAPv5 checksum offload")
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ena: make symbol 'ena_alloc_map_page' static

The sparse tool complains as follows:

drivers/net/ethernet/amazon/ena/ena_netdev.c:978:13: warning:
 symbol 'ena_alloc_map_page' was not declared. Should it be static?

This symbol is not used outside of ena_netdev.c, so marks it static.

Fixes: 947c54c395cb ("net: ena: Use dev_alloc() in RX buffer allocation")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: realtek: net: Fix less than zero comparison of a u16

The comparisons of the u16 values priv->phycr1 and priv->phycr2 to less
than zero always false because they are unsigned. Fix this by using an
int for the assignment and less than zero check.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 0a4355c2b7f8 ("net: phy: realtek: add dt property to disable CLKOUT clock")
Fixes: d90db36a9e74 ("net: phy: realtek: add dt property to enable ALDPS mode")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Fix missing { } around two statements in an if statement

There are missing { } around a block of code on an if statement. Fix this
by adding them in.

Addresses-Coverity: ("Nesting level does not match indentation")
Fixes: 46682cb86a37 ("net: stmmac: enable Intel mGbE 2.5Gbps link speed")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpsw-phy-sel: Use devm_platform_ioremap_resource_byname()

Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mvpp2-prefetch'

Matteo Croce says:

====================
mvpp2: prefetch data early

These two patches prefetch some data from RAM so to reduce stall
and speedup the packet processing.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

mvpp2: prefetch page

Most of the time during the RX is caused by the compound_head() call
done at the end of the RX loop:

       │     build_skb():
       [...]
       │     static inline struct page *compound_head(struct page *page)
       │     {
       │     unsigned long head = READ_ONCE(page->compound_head);
 65.23 │       ldr  x2, [x1, #8]

Prefetch the page struct as soon as possible, to speedup the RX path
noticeabily by a ~3-4% packet rate in a drop test.

       │     build_skb():
       [...]
       │     static inline struct page *compound_head(struct page *page)
       │     {
       │     unsigned long head = READ_ONCE(page->compound_head);
 17.92 │       ldr  x2, [x1, #8]

Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mvpp2: prefetch right address

In the RX buffer, the received data starts after a headroom used to
align the IP header and to allow prepending headers efficiently.
The prefetch() should take this into account, and prefetch from
the very start of the received data.

We can see that ether_addr_equal_64bits(), which is the first function
to access the data, drops from the top of the perf top output.

prefetch(data):

Overhead  Shared Object     Symbol
  11.64%  [kernel]          [k] eth_type_trans

prefetch(data + MVPP2_MH_SIZE + MVPP2_SKB_HEADROOM):

Overhead  Shared Object     Symbol
  13.42%  [kernel]          [k] build_skb
  10.35%  [mvpp2]           [k] mvpp2_rx
   9.35%  [kernel]          [k] __netif_receive_skb_core
   8.24%  [kernel]          [k] kmem_cache_free
   7.97%  [kernel]          [k] dev_gro_receive
   7.68%  [kernel]          [k] page_pool_put_page
   7.32%  [kernel]          [k] kmem_cache_alloc
   7.09%  [mvpp2]           [k] mvpp2_bm_pool_put
   3.36%  [kernel]          [k] eth_type_trans

Also, move the eth_type_trans() call a bit down, to give the RAM more
time to prefetch the data.

Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: am65-cpts: Use devm_platform_ioremap_resource_byname()

Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Use devm_platform_ioremap_resource_byname()

Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sgi: ioc3-eth: check return value after calling platform_get_resource()

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "nvme-tcp-offload: ULP Series"

This reverts commits:
- 762411542050dbe27c7c96f13c57f93da5d9b89a
     nvme: NVME_TCP_OFFLOAD should not default to m
- 5ff5622ea1f16d535f1be4e478e712ef48fe183b:
     Merge branch 'NVMeTCP-Offload-ULP'

As requested on the mailing-list: https://lore.kernel.org/netdev/SJ0PR18MB3882C20793EA35A3E8DAE300CC379@SJ0PR18MB3882.namprd18.prod.outlook.com/
This patch will revert the nvme-tcp-offload ULP from net-next.

The nvme-tcp-offload ULP series will continue to be considered only on
linux-nvme@lists.infradead.org.

Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: asix: ax88772: Fix less than zero comparison of a u16

The comparison of the u16 priv->phy_addr < 0 is always false because
phy_addr is unsigned. Fix this by assigning the return from the call
to function asix_read_phy_addr to int ret and using this for the
less than zero error check comparison.

Fixes: 7e88b11a862a ("net: usb: asix: refactor asix_read_phy_addr() and handle errors on return")
Addresses-Coverity: ("Unsigned compared against 0")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: asix: Fix less than zero comparison of a u16

The comparison of the u16 priv->phy_addr < 0 is always false because
phy_addr is unsigned. Fix this by assigning the return from the call
to function asix_read_phy_addr to int ret and using this for the
less than zero error check comparison.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/pablo/nf-next

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Add nfgenmsg field to nfnetlink's struct nfnl_info and use it.

2) Remove nft_ctx_init_from_elemattr() and nft_ctx_init_from_setattr()
   helper functions.

3) Add the nf_ct_pernet() helper function to fetch the conntrack
   pernetns data area.

4) Expose TCP and UDP flowtable offload timeouts through sysctl,
   from Oz Shlomo.

5) Add nfnetlink_hook subsystem to fetch the netfilter hook
   pipeline configuration, from Florian Westphal. This also includes
   a new field to annotate the hook type as metadata.

6) Fix unsafe memory access to non-linear skbuff in the new SCTP
   chunk support for nft_exthdr, from Phil Sutter.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

netdevsim: delete unnecessary debugfs checking

In normal situations where the driver doesn't dereference
"nsim_node->ddir" or "nsim_node->rate_parent" itself then we are not
supposed to check the return from debugfs functions.  In the case of
debugfs_create_dir() the check was wrong as well because it doesn't
return NULL, it returns error pointers.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink: Fix error message in devlink_rate_set_ops_supported()

The WARN_ON() macro takes a condition, it doesn't take a message.  Use
WARN() instead.

Fixes: 1897db2ec310 ("devlink: Allow setting tx rate for devlink rate leaf objects")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: qca8k: check the correct variable in qca8k_set_mac_eee()

This code check "reg" but "ret" was intended so the error handling will
never trigger.

Fixes: 7c9896e37807 ("net: dsa: qca8k: check return value of read functions correctly")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: qca8k: fix an endian bug in qca8k_get_ethtool_stats()

The "hi" variable is a u64 but the qca8k_read() writes to the top 32
bits of it.  That will work on little endian systems but it's a bit
subtle.  It's cleaner to make declare "hi" as a u32.  We will still need
to cast it when we shift it later on in the function but that's fine.

Fixes: 7c9896e37807 ("net: dsa: qca8k: check return value of read functions correctly")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'lapbther-cleanups'

Peng Li says:

====================
net: lapbether: clean up some code style issues

This patchset clean up some code style issues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: lapbether: fix the code style issue about line length

According to the chackpatch.pl,
line length of 123 exceeds 100 columns, so fix it.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: lapbether: fix the alignment issue

Alignment should match open parenthesis.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: lapbether: replace comparison to NULL with "lapbeth_get_x25_dev"

According to the chackpatch.pl, comparison to NULL could
be written "lapbeth_get_x25_dev".

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: lapbether: fix the comments style issue

Networking block comments don't use an empty /* line,
use /* Comment...

Block comments use * on subsequent lines.
Block comments use a trailing */ on a separate line.

This patch fixes the comments style issues.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: lapbether: remove unnecessary out of memory message

This patch removes unnecessary out of memory message,
to fix the following checkpatch.pl warning:
"WARNING: Possible unnecessary 'out of memory' message"

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: lapbether: remove trailing whitespaces

This patch removes trailing whitespaces.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: lapbether: move out assignment in if condition

Should not use assignment in if condition.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: lapbether: add blank line after declarations

This patch fixes the checkpatch error about missing a blank line
after declarations.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: lapbether: remove redundant blank line

This patch the redundant blank line.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: use list_move_tail instead of list_del/list_add_tail in hclge_main.c

Using list_move_tail() instead of list_del() + list_add_tail() in hclge_main.c.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: use list_move_tail instead of list_del/list_add_tail in hclgevf_main.c

Using list_move_tail() instead of list_del() + list_add_tail() in hclgevf_main.c.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: use list_move instead of list_del/list_add in nfp_cppcore.c

Using list_move() instead of list_del() + list_add() in nfp_cppcore.c.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/x25: fix a mistake in grammar

Fix a mistake in grammar.

Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ravb: Use devm_platform_get_and_ioremap_resource()

Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: b53: Do not force CPU to be always tagged

Commit ca8931948344 ("net: dsa: b53: Keep CPU port as tagged in all
VLANs") forced the CPU port to be always tagged in any VLAN membership.
This was necessary back then because we did not support Broadcom tags
for all configurations so the only way to differentiate tagged and
untagged traffic while DSA_TAG_PROTO_NONE was used was to force the CPU
port into being always tagged.

With most configurations enabling Broadcom tags, especially after
8fab459e69ab ("net: dsa: b53: Enable Broadcom tags for 531x5/539x
families") we do not need to apply this unconditional force tagging of
the CPU port in all VLANs.

A helper function is introduced to faciliate the encapsulation of the
specific condition requiring the CPU port to be tagged in all VLANs and
the dsa_switch_ops::untag_bridge_pvid boolean is moved to when
dsa_switch_ops::setup is called when we have already determined the
tagging protocol we will be using.

Reported-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: nf_tables: move base hook annotation to init helper

coverity scanner says:
2187  if (nft_is_base_chain(chain)) {
vvv   CID 1505166:  Memory - corruptions  (UNINIT)
vvv   Using uninitialized value "basechain".
2188  basechain->ops.hook_ops_type = NF_HOOK_OP_NF_TABLES;

... I don't see how nft_is_base_chain() can evaluate to true
while basechain pointer is garbage.

However, it seems better to place the NF_HOOK_OP_NF_TABLES annotation
in nft_basechain_hook_init() instead.

Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1505166 ("Memory - corruptions")
Fixes: 65b8b7bfc5284f ("netfilter: annotate nf_tables base hook ops")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nfnetlink_hook: add depends-on nftables

nfnetlink_hook.c: In function 'nfnl_hook_put_nft_chain_info':
nfnetlink_hook.c:76:7: error: implicit declaration of 'nft_is_active'

This macro is only defined when NF_TABLES is enabled.
While its possible to also add an ifdef-guard, the infrastructure
is currently not useful without nf_tables.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 252956528caa ("netfilter: add new hook nfnl subsystem")
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nfnetlink_hook: fix array index out-of-bounds error

Currently the array net->nf.hooks_ipv6 is accessed by index hook
before hook is sanity checked. Fix this by moving the sanity check
to before the array access.

Addresses-Coverity: ("Out-of-bounds access")
Fixes: e2cf17d3774c ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

net: appletalk: fix some mistakes in grammar

Fix some mistakes in grammar.

Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: nft_exthdr: Fix for unsafe packet data read

While iterating through an SCTP packet's chunks, skb_header_pointer() is
called for the minimum expected chunk header size. If (that part of) the
skbuff is non-linear, the following memcpy() may read data past
temporary buffer '_sch'. Use skb_copy_bits() instead which does the
right thing in this situation.

Fixes: 133dc203d77df ("netfilter: nft_exthdr: Support SCTP chunks")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

net: stmmac: explicitly deassert GMAC_AHB_RESET

We are currently assuming that GMAC_AHB_RESET will already be deasserted
by the bootloader. However if this has not been done, probing of the GMAC
will fail. To remedy this we must ensure GMAC_AHB_RESET has been deasserted
prior to probing.

v2 changes:
 - remove NULL condition check for stmmac_ahb_rst in stmmac_main.c
 - unwrap dev_err() message in stmmac_main.c
 - add PTR_ERR() around plat->stmmac_ahb_rst in stmmac_platform.c

v3 changes:
 - add error pointer to dev_err() output
 - add reset_control_assert(stmmac_ahb_rst) in stmmac_dvr_remove
 - revert PTR_ERR() around plat->stmmac_ahb_rst since this is performed
   on the returned value of ret by the calling function

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sh_eth: Use devm_platform_get_and_ioremap_resource()

Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: nixge: simplify code with devm platform functions

Use devm_platform_get_and_ioremap_resource() and
devm_platform_ioremap_resource_byname to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>