OSDN Git Service
Junio C Hamano [Wed, 13 Jan 2010 20:30:39 +0000 (12:30 -0800)]
Merge branch 'il/vcs-helper'
* il/vcs-helper:
Reset possible helper before reusing remote structure
Remove special casing of http, https and ftp
Support remote archive from all smart transports
Support remote helpers implementing smart transports
Support taking over transports
Refactor git transport options parsing
Pass unknown protocols to external protocol handlers
Support mandatory capabilities
Add remote helper debug mode
Conflicts:
Documentation/git-remote-helpers.txt
transport-helper.c
Junio C Hamano [Wed, 13 Jan 2010 19:58:56 +0000 (11:58 -0800)]
Merge branch 'cc/reset-more'
* cc/reset-more:
t7111: check that reset options work as described in the tables
Documentation: reset: add some missing tables
Fix bit assignment for CE_CONFLICTED
"reset --merge": fix unmerged case
reset: use "unpack_trees()" directly instead of "git read-tree"
reset: add a few tests for "git reset --merge"
Documentation: reset: add some tables to describe the different options
reset: improve mixed reset error message when in a bare repo
Junio C Hamano [Wed, 13 Jan 2010 19:58:34 +0000 (11:58 -0800)]
Merge branch 'nd/sparse'
* nd/sparse: (25 commits)
t7002: test for not using external grep on skip-worktree paths
t7002: set test prerequisite "external-grep" if supported
grep: do not do external grep on skip-worktree entries
commit: correctly respect skip-worktree bit
ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID
tests: rename duplicate t1009
sparse checkout: inhibit empty worktree
Add tests for sparse checkout
read-tree: add --no-sparse-checkout to disable sparse checkout support
unpack-trees(): ignore worktree check outside checkout area
unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index
unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout
unpack-trees.c: generalize verify_* functions
unpack-trees(): add CE_WT_REMOVE to remove on worktree alone
Introduce "sparse checkout"
dir.c: export excluded_1() and add_excludes_from_file_1()
excluded_1(): support exclude files in index
unpack-trees(): carry skip-worktree bit over in merged_entry()
Read .gitignore from index if it is skip-worktree
Avoid writing to buffer in add_excludes_from_file_1()
...
Conflicts:
.gitignore
Documentation/config.txt
Documentation/git-update-index.txt
Makefile
entry.c
t/t7002-grep.sh
Junio C Hamano [Tue, 12 Jan 2010 23:48:38 +0000 (15:48 -0800)]
Merge branch 'maint'
* maint:
remote-curl: Fix Accept header for smart HTTP connections
grep: -L should show empty files
rebase--interactive: Ignore comments and blank lines in peek_next_command
Matthieu Moy [Thu, 7 Jan 2010 14:54:10 +0000 (15:54 +0100)]
lockfile: show absolute filename in unable_to_lock_message
When calling a git command from a subdirectory and a file locking fails,
the user will get a path relative to the root of the worktree, which is
invalid from the place where the command is ran. Make it easy for the
user to know which file it is.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bart Trojanowski [Sat, 9 Jan 2010 00:54:39 +0000 (19:54 -0500)]
hg-to-git: fix COMMITTER type-o
This script passes the author and committer to git-commit via environment
variables, but it was missing the seccond T of COMMITTER in a few places.
Signed-off-by: Bart Trojanowski <bart@jukie.net>
Acked-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Tue, 12 Jan 2010 17:54:04 +0000 (09:54 -0800)]
remote-curl: Fix Accept header for smart HTTP connections
We actually expect to see an application/x-git-upload-pack-result
but we lied and said we Accept *-response. This was a typo on my
part when I was writing the code.
Fortunately the wrong Accept header had no real impact, as the
deployed git-http-backend servers were not testing the Accept
header before they returned their content.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 12 Jan 2010 08:22:23 +0000 (00:22 -0800)]
grep: -L should show empty files
The -L (--files-without-match) option is supposed to show paths that
produced no matches. When running the internal grep on work tree files,
however, we had an optimization to just return on zero-sized files,
without doing anything.
This optimization doesn't matter too much in practice (a tracked empty
file must be rare, or there is something wrong with your project); to
produce results consistent with GNU grep, we should stop the optimization
and show empty files as not having the given pattern.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Mon, 11 Jan 2010 21:09:44 +0000 (22:09 +0100)]
push: spell 'Note about fast-forwards' section name correctly in error message.
The error message in case of non-fast forward points to 'git push
--help', but used to talk about a section 'non-fast-forward', while the
actual section name is 'Note about fast-forwards'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Haggerty [Mon, 11 Jan 2010 15:56:45 +0000 (16:56 +0100)]
rebase--interactive: Ignore comments and blank lines in peek_next_command
Previously, blank lines and/or comments within a series of
squash/fixup commands would confuse "git rebase -i" into thinking that
the series was finished. It would therefore require the user to edit
the commit message for the squash/fixup commits seen so far. Then,
after continuing, it would ask the user to edit the commit message
again.
Ignore comments and blank lines within a group of squash/fixup
commands, allowing them to be processed in one go.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 10 Jan 2010 16:53:04 +0000 (08:53 -0800)]
Merge branch 'tr/http-updates'
* tr/http-updates:
Remove http.authAny
Allow curl to rewind the RPC read buffer
Add an option for using any HTTP authentication scheme, not only basic
http: maintain curl sessions
Junio C Hamano [Sun, 10 Jan 2010 16:52:53 +0000 (08:52 -0800)]
Merge branch 'jk/maint-1.6.5-reset-hard'
* jk/maint-1.6.5-reset-hard:
reset: unbreak hard resets with GIT_WORK_TREE
Junio C Hamano [Sun, 10 Jan 2010 16:52:45 +0000 (08:52 -0800)]
Merge branch 'jk/push-to-delete'
* jk/push-to-delete:
builtin-push: add --delete as syntactic sugar for :foo
Junio C Hamano [Sun, 10 Jan 2010 16:52:41 +0000 (08:52 -0800)]
Merge branch 'mm/config-path'
* mm/config-path:
builtin-config: add --path option doing ~ and ~user expansion.
Junio C Hamano [Sun, 10 Jan 2010 16:52:37 +0000 (08:52 -0800)]
Merge branch 'pm/cvs-environ'
* pm/cvs-environ:
CVS Server: Support reading base and roots from environment
Junio C Hamano [Sun, 10 Jan 2010 16:52:32 +0000 (08:52 -0800)]
Merge branch 'tr/maint-1.6.5-bash-prompt-show-submodule-changes'
* tr/maint-1.6.5-bash-prompt-show-submodule-changes:
bash completion: factor submodules into dirty state
Junio C Hamano [Sun, 10 Jan 2010 16:52:24 +0000 (08:52 -0800)]
Merge branch 'bg/maint-remote-update-default'
* bg/maint-remote-update-default:
Fix "git remote update" with remotes.defalt set
Junio C Hamano [Sun, 10 Jan 2010 16:52:10 +0000 (08:52 -0800)]
Merge branch 'mm/diag-path-in-treeish'
* mm/diag-path-in-treeish:
Detailed diagnosis when parsing an object name fails.
Junio C Hamano [Sun, 10 Jan 2010 16:52:06 +0000 (08:52 -0800)]
Merge branch 'fc/opt-quiet-gc-reset'
* fc/opt-quiet-gc-reset:
General --quiet improvements
Junio C Hamano [Sun, 10 Jan 2010 08:52:04 +0000 (00:52 -0800)]
Merge branch 'maint'
* maint:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
Documentation: tiny git config manual tweaks
Documentation: git gc packs refs by default now
checkout -m: do not try to fall back to --merge from an unborn branch
Junio C Hamano [Sun, 10 Jan 2010 08:51:54 +0000 (00:51 -0800)]
Merge branch 'maint-1.6.2' into maint
* maint-1.6.2:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
Conflicts:
diff.c
Junio C Hamano [Sun, 10 Jan 2010 08:49:47 +0000 (00:49 -0800)]
Merge branch 'maint-1.6.1' into maint-1.6.2
* maint-1.6.1:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
diff.c
Junio C Hamano [Sun, 10 Jan 2010 08:48:47 +0000 (00:48 -0800)]
Merge branch 'maint-1.6.0' into maint-1.6.1
* maint-1.6.0:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
Erik Faye-Lund [Sat, 9 Jan 2010 14:13:28 +0000 (15:13 +0100)]
daemon: consider only address in kill_some_child()
kill_some_child() compares the entire sockaddr_storage
structure (with the pad-bits zeroed out) when trying to
find out if connections originate from the same host.
However, sockaddr_storage contains the port-number for
the connection (which varies between connections), so
the comparison always fails.
Change the code so we only consider the host-address,
by introducing the addrcmp()-function that inspects
the address family and compare as appropriate.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Sat, 9 Jan 2010 05:10:05 +0000 (06:10 +0100)]
help: fix configured help format taking over command line one
Since commit
7c3baa9 (help -a: do not unnecessarily look for a
repository, 2009-09-04), the help format that is passed as a
command line option is not used if an help format has been
configured. This patch fixes that.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thiago Farina [Fri, 8 Jan 2010 22:45:08 +0000 (17:45 -0500)]
string-list: rename the include guard to STRING_LIST_H
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Fri, 8 Jan 2010 04:45:10 +0000 (05:45 +0100)]
t7111: check that reset options work as described in the tables
Some previous patches added some tables to the "git reset"
documentation. These tables describe the behavior of "git reset"
depending on the option it is passed and the state of the files
in the working tree, the index, HEAD and the target commit.
This patch adds some tests to make sure that the tables describe
the behavior of "git reset".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andreas Gruenbacher [Fri, 8 Jan 2010 13:40:00 +0000 (14:40 +0100)]
base85: Make the code more obvious instead of explaining the non-obvious
Here is another cleanup ...
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andreas Gruenbacher [Fri, 8 Jan 2010 16:22:18 +0000 (17:22 +0100)]
base85: encode_85() does not use the decode table
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andreas Gruenbacher [Fri, 8 Jan 2010 13:39:58 +0000 (14:39 +0100)]
base85 debug code: Fix length byte calculation
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Sun, 10 Jan 2010 03:01:21 +0000 (21:01 -0600)]
Documentation: tiny git config manual tweaks
As a verb, 'setup' is spelled 'set up'. “diff commands such as
diff-files” scans better without a comma. Clarify that shallow
and deep are special non-boolean values for format.thread rather
than boolean values with some other name.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Sun, 10 Jan 2010 02:59:41 +0000 (20:59 -0600)]
Documentation: git gc packs refs by default now
In commit
56752391 (Make "git gc" pack all refs by default,
2007-05-24), 'git gc' was changed to run pack-refs by default
Versions before v1.5.1.2 cannot clone repos with packed refs over
http, and versions before v1.4.4 cannot handled packed refs at
all, but more recent git should have no problems. Try to make
this more clear in the git-config manual.
The analagous passage in git-gc.txt was updated already with
commit
fe2128a (Change git-gc documentation to reflect
gc.packrefs implementation., 2008-01-09).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ilari Liusvaara [Sat, 9 Jan 2010 17:28:12 +0000 (19:28 +0200)]
Reset possible helper before reusing remote structure
If one had multiple URLs configured for remote with previous one
having forced helper but the subsequent one not, like:
url = foo::bar://baz
url = ssh://example/example.git
Then the subsequent URL is passed to foo helper, which isn't
correct. Fix it to be parsed normally by resetting foreign VCS
name before parsing the URL protocol.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 7 Jan 2010 23:47:32 +0000 (15:47 -0800)]
Describe second batch for 1.7.0 in draft release notes
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 7 Jan 2010 23:40:30 +0000 (15:40 -0800)]
Merge branch 'js/filter-branch-prime'
* js/filter-branch-prime:
filter-branch: remove an unnecessary use of 'git read-tree'
Junio C Hamano [Thu, 7 Jan 2010 23:40:21 +0000 (15:40 -0800)]
Merge branch 'sb/maint-octopus'
* sb/maint-octopus:
octopus: remove dead code
octopus: reenable fast-forward merges
octopus: make merge process simpler to follow
Conflicts:
git-merge-octopus.sh
Junio C Hamano [Thu, 7 Jan 2010 23:38:50 +0000 (15:38 -0800)]
Merge branch 'mg/tag-d-show'
* mg/tag-d-show:
tag -d: print sha1 of deleted tag
Junio C Hamano [Thu, 7 Jan 2010 23:38:11 +0000 (15:38 -0800)]
Merge branch 'so/cvsserver-update'
* so/cvsserver-update:
cvsserver: make the output of 'update' more compatible with cvs.
Junio C Hamano [Thu, 7 Jan 2010 23:37:57 +0000 (15:37 -0800)]
Merge branch 'bg/maint-add-all-doc'
* bg/maint-add-all-doc:
git-rm doc: Describe how to sync index & work tree
git-add/rm doc: Consistently back-quote
Documentation: 'git add -A' can remove files
Björn Gustavsson [Mon, 7 Dec 2009 18:35:42 +0000 (19:35 +0100)]
git-rm doc: Describe how to sync index & work tree
Newcomers to git that want to remove from the index only the
files that have disappeared from the working tree will probably
look for a way to do that in the documentation for 'git rm'.
Therefore, describe how that can be done (even though it involves
other commands than 'git rm'). Based on a suggestion by Junio,
but re-arranged and rewritten to better fit into the style of
command reference.
While at it, change a single occurrence of "work tree" to "working
tree" for consistency.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 7 Jan 2010 23:35:55 +0000 (15:35 -0800)]
Merge branch 'mv/commit-date'
* mv/commit-date:
Document date formats accepted by parse_date()
builtin-commit: add --date option
Junio C Hamano [Thu, 7 Jan 2010 23:35:52 +0000 (15:35 -0800)]
Merge branch 'mo/bin-wrappers'
* mo/bin-wrappers:
INSTALL: document a simpler way to run uninstalled builds
run test suite without dashed git-commands in PATH
build dashless "bin-wrappers" directory similar to installed bindir
Junio C Hamano [Thu, 7 Jan 2010 07:51:47 +0000 (23:51 -0800)]
checkout -m: do not try to fall back to --merge from an unborn branch
If switching from an unborn branch (= empty tree) to a valid commit failed
without -m, it would fail with -m option as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nguyễn Thái Ngọc Duy [Mon, 4 Jan 2010 12:34:15 +0000 (19:34 +0700)]
t7002: test for not using external grep on skip-worktree paths
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nguyễn Thái Ngọc Duy [Mon, 4 Jan 2010 12:34:14 +0000 (19:34 +0700)]
t7002: set test prerequisite "external-grep" if supported
Add another test to set prerequisite EXTGREP if the current build supports
external grep. This can be used to skip external grep only tests on builds
that do not support this optimization.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 6 Jan 2010 20:22:25 +0000 (12:22 -0800)]
.gitattributes: detect 8-space indent in shell scripts
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Wed, 6 Jan 2010 06:37:59 +0000 (00:37 -0600)]
Makefile: make ppc/sha1ppc.o depend on GIT-CFLAGS
The %.o: %.S pattern rule should depend on GIT-CFLAGS to avoid
trouble when ALL_CFLAGS changes.
The pattern only applies to one file (ppc/sha1ppc.S) and that
file does not use any #ifdefs, so leaving the dependency out is
probably harmless. Nevertheless, it is safer to include the
dependency in case future code's behavior does depend on the
build flags.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Tue, 5 Jan 2010 05:58:30 +0000 (06:58 +0100)]
Documentation: reset: add some missing tables
and while at it also explain why --merge option is disallowed in some
cases.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 4 Jan 2010 08:02:00 +0000 (00:02 -0800)]
Fix bit assignment for CE_CONFLICTED
CE_WT_REMOVE has already grabbed the same value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thiago Farina [Sun, 3 Jan 2010 16:20:30 +0000 (11:20 -0500)]
Use warning function instead of fprintf(stderr, "Warning: ...").
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 1 Jan 2010 07:04:04 +0000 (23:04 -0800)]
"reset --merge": fix unmerged case
Commit
9e8ecea (Add 'merge' mode to 'git reset', 2008-12-01) disallowed
"git reset --merge" when there was unmerged entries. But it wished if
unmerged entries were reset as if --hard (instead of --merge) has been
used. This makes sense because all "mergy" operations makes sure that
any path involved in the merge does not have local modifications before
starting, so resetting such a path away won't lose any information.
The previous commit changed the behavior of --merge to accept resetting
unmerged entries if they are reset to a different state than HEAD, but it
did not reset the changes in the work tree, leaving the conflict markers
in the resulting file in the work tree.
Fix it by doing three things:
- Update the documentation to match the wish of original "reset --merge"
better, namely, "An unmerged entry is a sign that the path didn't have
any local modification and can be safely resetted to whatever the new
HEAD records";
- Update read_index_unmerged(), which reads the index file into the cache
while dropping any higher-stage entries down to stage #0, not to copy
the object name from the higher stage entry. The code used to take the
object name from the a stage entry ("base" if you happened to have
stage #1, or "ours" if both sides added, etc.), which essentially meant
that you are getting random results depending on what the merge did.
The _only_ reason we want to keep a previously unmerged entry in the
index at stage #0 is so that we don't forget the fact that we have
corresponding file in the work tree in order to be able to remove it
when the tree we are resetting to does not have the path. In order to
differentiate such an entry from ordinary cache entry, the cache entry
added by read_index_unmerged() is marked as CE_CONFLICTED.
- Update merged_entry() and deleted_entry() so that they pay attention to
cache entries marked as CE_CONFLICTED. They are previously unmerged
entries, and the files in the work tree that correspond to them are
resetted away by oneway_merge() to the version from the tree we are
resetting to.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephan Beyer [Wed, 30 Dec 2009 05:54:47 +0000 (06:54 +0100)]
reset: use "unpack_trees()" directly instead of "git read-tree"
This patch makes "reset_index_file()" call "unpack_trees()" directly
instead of forking and execing "git read-tree". So the code is more
efficient.
And it's also easier to see which unpack_tree() options will be used,
as we don't need to follow "git read-tree"'s command line parsing
which is quite complex.
As Daniel Barkalow found, there is a difference between this new
version and the old one. The old version gives an error for
"git reset --merge" with unmerged entries, and the new version does
not when we reset the entries to some states that differ from HEAD.
Instead, it resets the index entry and succeeds, while leaving the
conflict markers in the corresponding file in the work tree (which
will be corrected by the next patch).
The code comes from the sequencer GSoC project:
git://repo.or.cz/git/sbeyer.git
(at commit
5a78908b70ceb5a4ea9fd4b82f07ceba1f019079)
Mentored-by: Daniel Barkalow <barkalow@iabervon.org>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 3 Jan 2010 07:04:11 +0000 (23:04 -0800)]
Merge branch 'maint'
* maint:
stash: mention --patch in usage string.
Matthieu Moy [Sat, 2 Jan 2010 16:35:32 +0000 (17:35 +0100)]
stash: mention --patch in usage string.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 31 Dec 2009 23:00:38 +0000 (15:00 -0800)]
Merge branch 'maint'
* maint:
branch: die explicitly why when calling "git branch [-a|-r] branchname".
fast-import: Document author/committer/tagger name is optional
SubmittingPatches: hints to know the status of a submitted patch.
Junio C Hamano [Thu, 31 Dec 2009 23:00:14 +0000 (15:00 -0800)]
Merge branch 'maint-1.6.0' into maint
* maint-1.6.0:
branch: die explicitly why when calling "git branch [-a|-r] branchname".
Matthieu Moy [Wed, 30 Dec 2009 14:45:31 +0000 (15:45 +0100)]
branch: die explicitly why when calling "git branch [-a|-r] branchname".
The -a and -r options used to be silently ignored in such a command.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Wed, 30 Dec 2009 15:03:48 +0000 (07:03 -0800)]
fast-import: Document author/committer/tagger name is optional
The fast-import parser does not validate that the author, committer
or tagger name component contains both a name and an email address.
Therefore the name component has always been optional. Correct the
documentation to match the implementation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Wed, 30 Dec 2009 14:51:22 +0000 (15:51 +0100)]
SubmittingPatches: hints to know the status of a submitted patch.
"What happened to my patch" is pretty much a FAQ on the Git mailing list,
it deserves a few paragraphs in SubmittingPatches...
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Thu, 31 Dec 2009 11:48:41 +0000 (12:48 +0100)]
bash completion: factor submodules into dirty state
In the implementation of GIT_PS1_SHOWDIRTYSTATE in
738a94a (bash:
offer to show (un)staged changes, 2009-02-03), I cut&pasted the
git-diff invocations from dirty-worktree checks elsewhere, carrying
along the --ignore-submodules option.
As pointed out by Kevin Ballard, this doesn't really make sense: to
the _user_, a changed submodule counts towards uncommitted changes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Björn Gustavsson [Thu, 31 Dec 2009 09:43:17 +0000 (10:43 +0100)]
Fix "git remote update" with remotes.defalt set
Starting from commit
8db35596, "git remote update" (with no
group name given) will fail with the following message if
remotes.default has been set in the config file:
fatal: 'default' does not appear to be a git repository
fatal: The remote end hung up unexpectedly
The problem is that the --multiple option is not passed to
"git fetch" if no remote or group name is given on the command
line. Fix the problem by always passing the --multiple
option to "git fetch" (which actually simplifies the code).
Reported-by: YONETANI Tomokazu
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Wed, 30 Dec 2009 16:51:53 +0000 (17:51 +0100)]
builtin-config: add --path option doing ~ and ~user expansion.
395de250 (Expand ~ and ~user in core.excludesfile, commit.template)
introduced a C function git_config_pathname, doing ~/ and ~user/
expansion. This patch makes the feature available to scripts with 'git
config --get --path'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sergei Organov [Mon, 7 Dec 2009 11:11:44 +0000 (14:11 +0300)]
cvsserver: make the output of 'update' more compatible with cvs.
Native cvs update outputs the string "cvs update: Updating <DIR>" for
every directory it processes (to stderr) unless -q or -Q is given on
comman-line. This is used, e.g., by emacs pcl-cvs to split files by
directory. This commit implements this feature in cvsserver.
Signed-off-by: Sergei Organov <osv@javad.com>
Acked-by: Martin Langhoff <martin.langhoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Thu, 31 Dec 2009 03:04:38 +0000 (19:04 -0800)]
bash completion: add space between branch name and status flags
Improve the readability of the bash prompt by adding a space between
the branch name and the status flags (dirty, stash, untracked).
While we are cleaning up this section of code, the two cases for
formatting the prompt are identical except for the format string,
so make them the same.
Suggested-by: Roman Fietze <roman.fietze@telemotive.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nguyễn Thái Ngọc Duy [Wed, 30 Dec 2009 14:11:44 +0000 (21:11 +0700)]
grep: do not do external grep on skip-worktree entries
Skip-worktree entries are not on disk. We cannot use external grep in such
cases.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phil Miller [Wed, 30 Dec 2009 19:35:31 +0000 (13:35 -0600)]
CVS Server: Support reading base and roots from environment
The Gitosis single-account Git/ssh hosting system runs git commands
through git-shell after confirming that the connecting user is
authorized to access the requested repository. This works well for
upload-pack and receive-pack, which take a repository argument through
git-shell. This doesn't work so well for `cvs server', which is passed
through literally, with no arguments. Allowing arguments risks
sneaking in `--export-all', so that restriction should be maintained.
Despite that, passing a repository root is necessary for per-user
access control by the hosting software, and passing a base path
improves usability without weakening security. Thus, git-cvsserver
needs to come up with these values at runtime by some other
means. Since git-shell preserves the environment for other purposes,
the environment can carry these arguments as well.
Thus, modify git-cvsserver to read $GIT_CVSSERVER_{BASE_PATH,ROOT} in
the absence of equivalent command line arguments.
Signed-off-by: Phil Miller <mille121@illinois.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jan Krüger [Wed, 30 Dec 2009 19:57:42 +0000 (20:57 +0100)]
builtin-push: add --delete as syntactic sugar for :foo
Refspecs without a source side have been reported as confusing by many.
As an alternative, this adds support for commands like:
git push origin --delete somebranch
git push origin --delete tag sometag
Specifically, --delete will prepend a colon to all colon-less refspecs
given on the command line, and will refuse to accept refspecs with
colons to prevent undue confusion.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Robert Zeh [Wed, 30 Dec 2009 00:58:48 +0000 (18:58 -0600)]
Add completion for git-svn mkdirs,reset,and gc
Signed-off-by: Robert Zeh <robert.a.zeh@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 30 Dec 2009 09:25:21 +0000 (01:25 -0800)]
Merge branch 'maint'
* maint:
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Documentation: always respect core.worktree if set
Junio C Hamano [Wed, 30 Dec 2009 09:24:12 +0000 (01:24 -0800)]
Merge branch 'maint-1.6.1' into maint
* maint-1.6.1:
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
builtin-commit.c
diff.c
Jeff King [Wed, 30 Dec 2009 09:02:53 +0000 (04:02 -0500)]
textconv: stop leaking file descriptors
We read the output from textconv helpers over a pipe, but we
never actually closed our end of the pipe after using it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Wed, 30 Dec 2009 05:54:46 +0000 (06:54 +0100)]
reset: add a few tests for "git reset --merge"
Commit
9e8eceab ("Add 'merge' mode to 'git reset'", 2008-12-01),
added the --merge option to git reset, but there were no test cases
for it.
This was not a big problem because "git reset" was just forking and
execing "git read-tree", but this will change in a following patch.
So let's add a few test cases to make sure that there will be no
regression.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Wed, 30 Dec 2009 05:54:45 +0000 (06:54 +0100)]
Documentation: reset: add some tables to describe the different options
This patch adds a DISCUSSION section that contains some tables to
show how the different "git reset" options work depending on the
states of the files in the working tree, the index, HEAD and the
target commit.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Wed, 30 Dec 2009 05:54:44 +0000 (06:54 +0100)]
reset: improve mixed reset error message when in a bare repo
When running a "git reset --mixed" in a bare repository, the
message displayed is something like:
fatal: This operation must be run in a work tree
fatal: Could not reset index file to revision 'HEAD^'.
This message is a little bit misleading because a mixed reset is
ok in a git directory, so it is not absolutely needed to run it in
a work tree.
So this patch improves upon the above by changing the message to:
fatal: mixed reset is not allowed in a bare repository
And if "git reset" is ever sped up by using unpack_tree() directly
(instead of execing "git read-tree"), this patch will also make
sure that a mixed reset is still disallowed in a bare repository.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 30 Dec 2009 08:47:03 +0000 (03:47 -0500)]
reset: unbreak hard resets with GIT_WORK_TREE
Commit
952dfc6 tried to tighten the safety valves for doing
a "reset --hard" in a bare repository or outside the work
tree, but accidentally broke the case for GIT_WORK_TREE.
This patch unbreaks it.
Most git commands which need a work tree simply use
NEED_WORK_TREE in git.c to die before they get to their
cmd_* function. Reset, however, only needs a work tree in
some cases, and so must handle the work tree itself. The
error that
952dfc6 made was to simply forbid certain
operations if the work tree was not set up; instead, we need
to do the same thing that NEED_WORK_TREE does, which is to
call setup_work_tree(). We no longer have to worry about dying
in the non-worktree case, as setup_work_tree handles that
for us.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 30 Dec 2009 04:16:34 +0000 (20:16 -0800)]
Merge branch 'maint-1.6.0' into maint-1.6.1
* maint-1.6.0:
commit: --cleanup is a message option
t7102: make the test fail if one of its check fails
Greg Price [Tue, 29 Dec 2009 21:54:49 +0000 (16:54 -0500)]
commit: --cleanup is a message option
In the usage message for "git commit", the --cleanup option appeared
at the end, as one of the "contents options":
usage: git commit [options] [--] <filepattern>...
...
Commit message options
...
Commit contents options
...
--allow-empty ok to record an empty change
--cleanup <default> how to strip spaces and #comments from message
This is confusing, in part because it makes it ambiguous whether
--allow-empty, just above, refers to an empty diff or an empty message.
Move --cleanup into the 'message options' group. Also add a pair of
comments to prevent similar oversights in the future.
Signed-off-by: Greg Price <price@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andreas Schwab [Tue, 29 Dec 2009 19:09:15 +0000 (20:09 +0100)]
git count-objects: handle packs bigger than 4G
Use off_t to count sizes of packs and objects to avoid overflow after
4Gb.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nguyễn Thái Ngọc Duy [Tue, 29 Dec 2009 08:13:18 +0000 (15:13 +0700)]
t7102: make the test fail if one of its check fails
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 28 Dec 2009 18:04:24 +0000 (10:04 -0800)]
Remove http.authAny
Back when the feature to use different HTTP authentication methods was
originally written, it needed an extra HTTP request for everything when
the feature was in effect, because we didn't reuse curl sessions.
However,
b8ac923 (Add an option for using any HTTP authentication scheme,
not only basic, 2009-11-27) builds on top of an updated codebase that does
reuse curl sessions; there is no need to manually avoid the extra overhead
by making this configurable anymore.
Acked-by: Martin Storsjo <martin@martin.st>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nguyễn Thái Ngọc Duy [Tue, 29 Dec 2009 07:48:41 +0000 (14:48 +0700)]
Documentation: always respect core.worktree if set
The value of core.worktree in a ".git/config" is honored even when it
differs from the directory that has the ".git" directory as its
subdirectory. This is likely to be a misconfiguration, so warn users
about it. Also, drop the part of the documentation that incorrectly
claimed that we ignore such a misconfigured value.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ilari Liusvaara [Wed, 9 Dec 2009 15:26:34 +0000 (17:26 +0200)]
Remove special casing of http, https and ftp
HTTP, HTTPS and FTP are no longer special to transport code. Also
add support for FTPS (curl supports it so it is easy).
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ilari Liusvaara [Wed, 9 Dec 2009 15:26:33 +0000 (17:26 +0200)]
Support remote archive from all smart transports
Previously, remote archive required internal (non remote-helper)
smart transport. Extend the remote archive to also support smart
transports implemented by remote helpers.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ilari Liusvaara [Wed, 9 Dec 2009 15:26:32 +0000 (17:26 +0200)]
Support remote helpers implementing smart transports
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 28 Dec 2009 07:01:32 +0000 (23:01 -0800)]
Merge branch 'jk/1.7.0-status'
* jk/1.7.0-status:
status/commit: do not suggest "reset HEAD <path>" while merging
commit/status: "git add <path>" is not necessarily how to resolve
commit/status: check $GIT_DIR/MERGE_HEAD only once
t7508-status: test all modes with color
t7508-status: status --porcelain ignores relative paths setting
status: reduce duplicated setup code
status: disable color for porcelain format
status -s: obey color.status
builtin-commit: refactor short-status code into wt-status.c
t7508-status.sh: Add tests for status -s
status -s: respect the status.relativePaths option
docs: note that status configuration affects only long format
commit: support alternate status formats
status: add --porcelain output format
status: refactor format option parsing
status: refactor short-mode printing to its own function
status: typo fix in usage
git status: not "commit --dry-run" anymore
git stat -s: short status output
git stat: the beginning of "status that is not a dry-run of commit"
Conflicts:
t/t4034-diff-words.sh
wt-status.c
Junio C Hamano [Mon, 28 Dec 2009 06:59:55 +0000 (22:59 -0800)]
Merge branch 'maint'
* maint:
read_index(): fix reading extension size on BE 64-bit archs
Junio C Hamano [Sun, 27 Dec 2009 18:42:00 +0000 (10:42 -0800)]
Merge branch 'nf/maint-fix-index-ext-len-on-be64' into maint
* nf/maint-fix-index-ext-len-on-be64:
read_index(): fix reading extension size on BE 64-bit archs
Nathaniel W Filardo [Sun, 27 Dec 2009 06:11:21 +0000 (01:11 -0500)]
read_index(): fix reading extension size on BE 64-bit archs
On big endian platforms with 8-byte unsigned long, the code reads the
size of the index extension section (which is a 4-byte network byte
order integer) incorrectly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 26 Dec 2009 22:33:05 +0000 (14:33 -0800)]
Merge branch 'maint'
* maint:
Makefile: FreeBSD (both 7 and 8) needs OLD_ICONV
Start 1.6.6.X maintenance track
Add git-http-backend to command-list.
t4019 "grep" portability fix
t1200: work around a bug in some implementations of "find"
Conflicts:
RelNotes
Junio C Hamano [Sat, 26 Dec 2009 22:32:36 +0000 (14:32 -0800)]
Makefile: FreeBSD (both 7 and 8) needs OLD_ICONV
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 26 Dec 2009 22:20:09 +0000 (14:20 -0800)]
Start 1.6.6.X maintenance track
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 26 Dec 2009 22:15:55 +0000 (14:15 -0800)]
Merge branch 'jc/maint-obsd46' into maint
* jc/maint-obsd46:
t4019 "grep" portability fix
t1200: work around a bug in some implementations of "find"
Tarmigan Casebolt [Sat, 26 Dec 2009 17:01:07 +0000 (12:01 -0500)]
Add git-http-backend to command-list.
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 26 Dec 2009 22:11:46 +0000 (14:11 -0800)]
Kick off 1.7.0 cycle
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 26 Dec 2009 22:03:18 +0000 (14:03 -0800)]
Merge branch 'gb/1.7.0-diff-whitespace-only-output'
* gb/1.7.0-diff-whitespace-only-output:
No diff -b/-w output for all-whitespace changes
Junio C Hamano [Sat, 26 Dec 2009 22:03:18 +0000 (14:03 -0800)]
Merge branch 'jc/1.7.0-diff-whitespace-only-status'
* jc/1.7.0-diff-whitespace-only-status:
diff.c: fix typoes in comments
Make test case number unique
diff: Rename QUIET internal option to QUICK
diff: change semantics of "ignore whitespace" options
Conflicts:
diff.h
Junio C Hamano [Sat, 26 Dec 2009 22:03:17 +0000 (14:03 -0800)]
Merge branch 'jc/1.7.0-push-safety'
* jc/1.7.0-push-safety:
Refuse deleting the current branch via push
Refuse updating the current branch in a non-bare repository via push
Junio C Hamano [Sat, 26 Dec 2009 22:03:17 +0000 (14:03 -0800)]
Merge branch 'jc/1.7.0-send-email-no-thread-default'
* jc/1.7.0-send-email-no-thread-default:
send-email: make --no-chain-reply-to the default
Conflicts:
git-send-email.perl
Junio C Hamano [Sat, 26 Dec 2009 22:03:16 +0000 (14:03 -0800)]
Merge branch 'sr/vcs-helper'
* sr/vcs-helper:
tests: handle NO_PYTHON setting
builtin-push: don't access freed transport->url
Add Python support library for remote helpers
Basic build infrastructure for Python scripts
Allow helpers to report in "list" command that the ref is unchanged
Fix various memory leaks in transport-helper.c
Allow helper to map private ref names into normal names
Add support for "import" helper command
Allow specifying the remote helper in the url
Add a config option for remotes to specify a foreign vcs
Allow fetch to modify refs
Use a function to determine whether a remote is valid
Allow programs to not depend on remotes having urls
Fix memory leak in helper method for disconnect
Conflicts:
Documentation/git-remote-helpers.txt
Makefile
builtin-ls-remote.c
builtin-push.c
transport-helper.c
Junio C Hamano [Sat, 26 Dec 2009 21:53:17 +0000 (13:53 -0800)]
t4019 "grep" portability fix
Input to "grep" is supposed to be "text", but we deliberately feed output
from "git diff --color" to sift it into two sets of lines (ones with
errors, the other without). Some implementations of "grep" only report
matches with the exit status, without showing the matched lines in their
output (e.g. OpenBSD 4.6, which says "Binary file .. matches").
Fortunately, "grep -a" is often a way to force the command to treat its
input as text.
Signed-off-by: Junio C Hamano <gitster@pobox.com>