OSDN Git Service
Chris Wilson [Wed, 15 Nov 2017 10:50:35 +0000 (10:50 +0000)]
drm/i915/: Initialise trans_min for skl_compute_transition_wm()
clang spots
drivers/gpu/drm/i915/intel_pm.c:4655:6: warning: variable 'trans_min' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
if (INTEL_GEN(dev_priv) >= 10)
but fortunately for us we skip the function unless on a gen10+ device.
However, to keep the function generic in case we do want to re-enable it
for gen9 again, initialise trans_min to 0.
References:
ca47667f523e ("drm/i915/gen10: Calculate and enable transition WM")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115105036.1094-3-chris@chris-wilson.co.uk
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Mon, 19 Feb 2018 14:01:44 +0000 (14:01 +0000)]
drm/i915: Clear the in-use marker on execbuf failure
If we fail to unbind the vma (due to a signal on an active buffer that
needs to be moved for the next execbuf), then we need to clear the
persistent tracking state we setup for this execbuf.
Fixes:
c7c6e46f913b ("drm/i915: Convert execbuf to use struct-of-array packing for critical fields")
Testcase: igt/gem_fenced_exec_thrash/no-spare-fences-busy*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.14+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219140144.24004-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 19 Feb 2018 10:09:26 +0000 (10:09 +0000)]
drm/i915: Prune gen8_gt_irq_handler
The compiler is not automatically caching the i915->regs address inside
a register and emitting a load for every mmio access. For simple
functions like gen8_gt_irq_handler that are already using the raw
accessors, we can open-code them for substantial savings:
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-83 (-83)
Function old new delta
gen8_gt_irq_handler 290 266 -24
gen8_gt_irq_ack 181 122 -59
Total: Before=954637, After=954554, chg -0.01%
v2: Add raw_reg_read/raw_reg_write.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219100926.16554-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 15 Feb 2018 07:37:12 +0000 (07:37 +0000)]
drm/i915: Track GT interrupt handling using the master iir
Keep the master iir and use it to reduce the number of reads and writes
to the GT iir array, i.e. only the bits marked as set by the master iir
are valid inside GT iir array and will be handled during the interrupt.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180215073713.26985-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 19 Feb 2018 12:50:46 +0000 (12:50 +0000)]
drm/i915: Remove WARN_ONCE for failing to pm_runtime_if_in_use
As the driver is called to handle circumstances beyond it's control, we
cannot assume that the pm_runtime core is happy to see us. For example,
if we are called from shrink_slab to free up our pages during suspend,
rpm may be disabled and pm_runtime_if_in_use() decides to fail with
-EINVAL rather than simply say no. This is expected to happen, so don't
warn. For example,
[ 217.429228] Suspending console(s) (use no_console_suspend to debug)
[ 217.557179] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 217.559399] sd 0:0:0:0: [sda] Stopping disk
[ 218.661567] i915 0000:00:02.0: Resetting chip after gpu hang
[ 219.523879] ------------[ cut here ]------------
[ 219.524474] pm_runtime_get_if_in_use() failed: -22
[ 219.524817] WARNING: CPU: 1 PID: 14 at drivers/gpu/drm/i915/intel_runtime_pm.c:3351 intel_runtime_pm_get_if_in_use+0xe3/0x150 [i915]
[ 219.524836] Modules linked in: vgem i915 snd_hda_codec_realtek snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec r8169 lpc_ich snd_hwdep mii snd_hda_core snd_pcm prime_numbers
[ 219.525054] CPU: 1 PID: 14 Comm: cpuhp/1 Tainted: G U
4.16.0-rc1-g740f57c54ecf-kasan_6+ #1
[ 219.525070] Hardware name: /D510MO, BIOS MOPNV10J.86A.0311.2010.0802.2346 08/02/2010
[ 219.525294] RIP: 0010:intel_runtime_pm_get_if_in_use+0xe3/0x150 [i915]
[ 219.525313] RSP: 0018:
ffff880018f5edf8 EFLAGS:
00010286
[ 219.525344] RAX:
dffffc0000000008 RBX:
ffff880007fc0000 RCX:
0000000000000000
[ 219.525361] RDX:
0000000000000001 RSI:
ffffffff850609c0 RDI:
ffffffff872992a0
[ 219.525377] RBP:
0000000000000000 R08:
0000000000000001 R09:
0000000000000000
[ 219.525394] R10:
0000000000000000 R11:
0000000000000000 R12:
ffff880007fc0000
[ 219.525411] R13:
ffff880018f5f0f8 R14:
ffff880007fc8de8 R15:
ffff880018f5f0f0
[ 219.525429] FS:
0000000000000000(0000) GS:
ffff880019c80000(0000) knlGS:
0000000000000000
[ 219.525446] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 219.525463] CR2:
0000564df7897e86 CR3:
0000000000d7c000 CR4:
00000000000006e0
[ 219.525478] Call Trace:
[ 219.525734] i915_gem_shrink+0x841/0xb50 [i915]
[ 219.525802] ? debug_check_no_locks_freed+0x2a0/0x2a0
[ 219.525842] ? trace_hardirqs_on_thunk+0x1a/0x1c
[ 219.526083] ? i915_gem_shrinker_count+0x2f0/0x2f0 [i915]
[ 219.526131] ? lock_acquire+0x138/0x3c0
[ 219.526157] ? lock_acquire+0x138/0x3c0
[ 219.526391] ? shrinker_lock+0x49/0x210 [i915]
[ 219.526465] ? mutex_trylock+0x15c/0x1a0
[ 219.526694] ? shrinker_lock+0x49/0x210 [i915]
[ 219.526969] ? i915_gem_shrinker_scan+0xc4/0x320 [i915]
[ 219.527200] i915_gem_shrinker_scan+0xc4/0x320 [i915]
[ 219.527448] ? i915_gem_shrinker_vmap+0x3a0/0x3a0 [i915]
[ 219.527533] shrink_slab.part.18+0x2d0/0x8d0
[ 219.527613] ? unregister_shrinker+0x1f0/0x1f0
[ 219.527668] ? mem_cgroup_iter+0x37d/0xc50
[ 219.527728] shrink_node+0x882/0xbe0
[ 219.527847] ? shrink_node_memcg+0x11c0/0x11c0
[ 219.527882] ? mark_held_locks+0xa8/0xf0
[ 219.527931] ? trace_hardirqs_on_caller+0x33f/0x590
[ 219.527961] ? ktime_get+0xad/0x140
[ 219.528015] do_try_to_free_pages+0x2d3/0xd70
[ 219.528099] ? allow_direct_reclaim.part.23+0x1d0/0x1d0
[ 219.528132] ? shrink_node+0xbe0/0xbe0
[ 219.528213] try_to_free_pages+0x1cd/0x570
[ 219.528257] ? do_try_to_free_pages+0xd70/0xd70
[ 219.528355] __alloc_pages_nodemask+0xadf/0x2110
[ 219.528423] ? unwind_next_frame+0x870/0x1970
[ 219.528465] ? deref_stack_reg+0x97/0xc0
[ 219.528503] ? gfp_pfmemalloc_allowed+0x150/0x150
[ 219.528539] ? register_sched_domain_sysctl+0x23a/0x1b90
[ 219.528588] ? unwind_next_frame+0x138/0x1970
[ 219.528619] ? kthread+0x30a/0x3d0
[ 219.528677] ? __read_once_size_nocheck.constprop.4+0x10/0x10
[ 219.528698] ? deref_stack_reg+0xc0/0xc0
[ 219.528762] ? __save_stack_trace+0x6e/0xd0
[ 219.528822] depot_save_stack+0x3bc/0x430
[ 219.528870] kasan_kmalloc+0x142/0x170
[ 219.528912] ? __kmalloc+0xf7/0x340
[ 219.528935] ? register_sched_domain_sysctl+0x23a/0x1b90
[ 219.528957] ? partition_sched_domains+0x4d4/0x840
[ 219.528978] ? sched_cpu_deactivate+0x11b/0x150
[ 219.529001] ? cpuhp_invoke_callback+0x160/0x15f0
[ 219.529023] ? cpuhp_thread_fun+0x35e/0x710
[ 219.529044] ? smpboot_thread_fn+0x50a/0x7f0
[ 219.529065] ? kthread+0x30a/0x3d0
[ 219.529086] ? ret_from_fork+0x24/0x50
[ 219.529141] ? register_sched_domain_sysctl+0x23a/0x1b90
[ 219.529169] ? register_sched_domain_sysctl+0x23a/0x1b90
[ 219.529198] ? set_track+0x87/0x100
[ 219.529225] ? init_object+0x6e/0x80
[ 219.529275] ? ___slab_alloc.constprop.36+0x232/0x3e0
[ 219.529303] ? ___slab_alloc.constprop.36+0x232/0x3e0
[ 219.529325] ? register_sched_domain_sysctl+0x23a/0x1b90
[ 219.529410] ? mark_held_locks+0xa8/0xf0
[ 219.529453] ? register_sched_domain_sysctl+0x23a/0x1b90
[ 219.529479] ? trace_hardirqs_on_caller+0x33f/0x590
[ 219.529532] __kmalloc+0xf7/0x340
[ 219.529557] ? register_sched_domain_sysctl+0x23a/0x1b90
[ 219.529604] register_sched_domain_sysctl+0x23a/0x1b90
[ 219.529684] ? sched_debug_show+0x20/0x20
[ 219.529713] ? debug_object_activate+0x530/0x530
[ 219.529771] ? rcu_lockdep_current_cpu_online+0xdc/0x130
[ 219.529802] ? partition_sched_domains+0x4ae/0x840
[ 219.529825] ? rcu_read_lock_sched_held+0x10f/0x130
[ 219.529875] partition_sched_domains+0x4d4/0x840
[ 219.529955] ? sched_init_domains+0x110/0x110
[ 219.529981] ? __wait_rcu_gp+0x24f/0x390
[ 219.530054] sched_cpu_deactivate+0x11b/0x150
[ 219.530086] ? sched_cpu_activate+0x1e0/0x1e0
[ 219.530112] ? __call_rcu.constprop.53+0x680/0x680
[ 219.530132] ? call_rcu_bh+0x10/0x10
[ 219.530166] ? debug_check_no_locks_freed+0x2a0/0x2a0
[ 219.530201] ? trace_raw_output_rcu_utilization+0xa0/0xa0
[ 219.530267] ? trace_raw_output_rcu_utilization+0xa0/0xa0
[ 219.530337] ? rcu_lockdep_current_cpu_online+0xdc/0x130
[ 219.530370] ? sched_cpu_activate+0x1e0/0x1e0
[ 219.530397] cpuhp_invoke_callback+0x160/0x15f0
[ 219.530424] ? lock_acquire+0x138/0x3c0
[ 219.530445] ? lock_acquire+0x138/0x3c0
[ 219.530471] ? cpuhp_thread_fun+0xaf/0x710
[ 219.530507] ? pci_mmcfg_check_reserved+0x100/0x100
[ 219.530565] cpuhp_thread_fun+0x35e/0x710
[ 219.530618] ? cpuhp_complete_idle_dead+0x10/0x10
[ 219.530639] smpboot_thread_fn+0x50a/0x7f0
[ 219.530678] ? sort_range+0x20/0x20
[ 219.530709] ? __kthread_parkme+0xba/0x1f0
[ 219.530739] ? schedule+0x84/0x1a0
[ 219.530768] ? __kthread_parkme+0xbf/0x1f0
[ 219.530805] ? sort_range+0x20/0x20
[ 219.530831] kthread+0x30a/0x3d0
[ 219.530859] ? _kthread_create_on_node+0xb0/0xb0
[ 219.530900] ret_from_fork+0x24/0x50
[ 219.530999] Code: 01 00 00 00 85 c0 74 4a 89 e8 5b 5d c3 80 3d 48 37 4e 00 00 75 f2 89 c6 48 c7 c7 40 f0 61 c0 c6 05 36 37 4e 00 01 e8 ed 2a e1 c2 <0f> ff eb d9 80 3d 3f 37 4e 00 00 75 94 48 c7 c7 60 e8 61 c0 c6
[ 219.531880] ---[ end trace
18ec0139488ea0c8 ]---
[ 219.607967] IRQ 16: no longer affine to CPU1
[ 219.670291] IRQ 24: no longer affine to CPU2
[ 219.701489] IRQ 8: no longer affine to CPU3
[ 219.701529] IRQ 9: no longer affine to CPU3
[ 219.701582] IRQ 18: no longer affine to CPU3
[ 219.701640] IRQ 25: no longer affine to CPU3
[ 219.743857] cache: parent cpu1 should not be sleeping
[ 219.784549] cache: parent cpu2 should not be sleeping
[ 219.816041] cache: parent cpu3 should not be sleeping
v2: Add Returns: information to intel_runtime_pm_get_if_in_use() kerneldoc.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219125046.19363-1-chris@chris-wilson.co.uk
Mauro Carvalho Chehab [Fri, 16 Feb 2018 13:48:20 +0000 (11:48 -0200)]
drm: intel_dpio_phy: fix kernel-doc comments at nested struct
The in-lined comments for channel.port doesn't follow the syntax
described at kernel-doc document, causing the following warning:
$ ./scripts/kernel-doc -none drivers/gpu/drm/i915/intel_dpio_phy.c
drivers/gpu/drm/i915/intel_dpio_phy.c:154: warning: Function parameter or member 'channel.port' not described in 'bxt_ddi_phy_info'
While the best would be for the Kernel to deduce that from the
context, supporting it is not trivial. So, let's just stick with
the existing syntax.
[Jani: depends on "scripts: kernel-doc: support in-line comments on
nested structs/unions" to actually fix the warning.]
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9ba9ac773f4f9e60770bd9169b0e46ac974d858a.1518788761.git.mchehab@s-opensource.com
Maarten Lankhorst [Thu, 15 Feb 2018 09:14:25 +0000 (10:14 +0100)]
drm/i915: Release connector iterator on a digital port conflict.
Hitting the failure path through check_digital_port_conflicts triggers:
================================================
WARNING: lock held when returning to user space!
4.16.0-rc1-CI-kasan_1+ #1 Tainted: G W
------------------------------------------------
kms_3d/1439 is leaving the kernel with locks still held!
1 lock held by kms_3d/1439:
#0: (drm_connector_list_iter){.+.+}, at: [<
000000003745d183>] intel_atomic_check+0x1d9d/0x3ff0 [i915]
Rearrange the code to have a single exit path through the unlock.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180215091425.42364-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Fri, 16 Feb 2018 15:32:10 +0000 (15:32 +0000)]
drm/i915/execlists: Remove too early assert
We can't assert that the execlists are active before we set the flag. So
perform the assert after we are expected to have marked the execlists
active.
Fixes:
339ccd35b42c ("drm/i915: Assert that we always complete a submission to guc/execlists")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180216153210.30551-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 15 Feb 2018 16:25:53 +0000 (16:25 +0000)]
drm/i915: Assert that we always complete a submission to guc/execlists
The continual resubmission model for execlists (and emulated over guc)
requires that we keep feeding requests into the HW in order to generate
more CS interrupts to drain the rest of the queue. Add a couple of
asserts to ensure that we don't skip a cycle and come to a grinding
halt.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180215162553.23348-1-chris@chris-wilson.co.uk
Christian König [Fri, 16 Feb 2018 12:43:38 +0000 (13:43 +0100)]
drm: move read_domains and write_domain into i915
i915 is the only driver using those fields in the drm_gem_object
structure, so they only waste memory for all other drivers.
Move the fields into drm_i915_gem_object instead and patch the i915 code
with the following sed commands:
sed -i "s/obj->base.read_domains/obj->read_domains/g" drivers/gpu/drm/i915/*.c drivers/gpu/drm/i915/*/*.c
sed -i "s/obj->base.write_domain/obj->write_domain/g" drivers/gpu/drm/i915/*.c drivers/gpu/drm/i915/*/*.c
Change is only compile tested.
v2: move fields around as suggested by Chris.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180216124338.9087-1-christian.koenig@amd.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Mahesh Kumar [Thu, 15 Feb 2018 09:56:41 +0000 (15:26 +0530)]
drm/i915/cnl: Fix PORT_TX_DW5/7 register address
Register Address for CNL_PORT_DW5_LN0_D is 0x162E54, but current code is
defining it as 0x162ED4. Similarly for CNL_PORT_DW7_LN0_D register address
is defined 0x162EDC instead of 0x162E5C, fix it.
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Fixes:
04416108ccea ("drm/i915/cnl: Add registers related to voltage swing sequences.")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180215095643.3844-2-mahesh1.kumar@intel.com
Dhinakaran Pandiyan [Sat, 3 Feb 2018 05:13:02 +0000 (21:13 -0800)]
drm/i915: Estimate and update missed vblanks.
The frame counter may have got reset between disabling and enabling vblank
interrupts due to DMC putting the hardware to DC5/6 states if PSR was
active. The frame counter could also have stalled if PSR was active in case
there was no DMC. The frame counter resetting has a user visible impact
of screen freezes.
Make use of drm_vblank_restore() to compute missed vblanks for the duration
in which vblank interrupts were disabled and update the vblank counter with
this value as diff. There's no need to check if PSR was actually active in
the interrupt disabled duration, so simplify the check to a feature check.
Enabling vblank interrupts wakes up the hardware from DC5/6 and prevents it
from going back again as long as the there are pending interrupts. So, we
don't have to explicity disallow DC5/6 after enabling vblank interrupts to
keep the counter running.
This change is not applicable to CHV, as enabling interrupts does not
prevent the hardware from activating PSR.
v2: Added comments(Rodrigo) and rewrote commit message.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-10-dhinakaran.pandiyan@intel.com
Dhinakaran Pandiyan [Sat, 3 Feb 2018 05:13:01 +0000 (21:13 -0800)]
drm/vblank: Restoring vblank counts after device PM events.
The HW frame counter can get reset if device enters a low power state after
vblank interrupts were disabled. This messes up any following vblank count
update as a negative diff (huge unsigned diff) is calculated from the HW
frame counter change. We cannot ignore negative diffs altogther as there
could be legitimate wrap arounds. So, allow drivers to update vblank->count
with missed vblanks for the time interrupts were disabled. This is similar
to _crtc_vblank_on() except that vblanks interrupts are not enabled at the
end as this function is expected to be called from the driver
_enable_vblank() vfunc.
v2: drm_crtc_vblank_restore should take crtc as arg. (Chris)
Add docs and sprinkle some asserts.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-9-dhinakaran.pandiyan@intel.com
Dhinakaran Pandiyan [Sat, 3 Feb 2018 05:13:00 +0000 (21:13 -0800)]
drm/vblank: Do not update vblank count if interrupts are already disabled.
Updating vblank counts requires register reads and these reads may not
return meaningful values if the device was in a low power state after
vblank interrupts were last disabled. So, update the count only if vblank
interrupts are enabled. Secondly, this means the registers should be read
before disabling vblank interrupts.
v2: Don't check vblank->enabled outside it's lock (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-8-dhinakaran.pandiyan@intel.com
Dhinakaran Pandiyan [Sat, 3 Feb 2018 05:12:59 +0000 (21:12 -0800)]
drm/atomic: Handle 64-bit return from drm_crtc_vblank_count()
570e86963a51 ("drm: Widen vblank count to 64-bits [v3]") changed the
return type for drm_crtc_vblank_count() to u64.
The flip ioctl receives a 32-bit target sequence from user space and is
compared against the current sequence from drm_crtc_vblank_count(). So,
typecast return from drm_crtc_vblank_count() explicitly to add clarity.
__drm_crtcs_state.last_vblank_count however only ever stores the value from
drm_crtc_vblank_count() and can be upgraded to u64.
Cc: Keith Packard <keithp@keithp.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-7-dhinakaran.pandiyan@intel.com
Dhinakaran Pandiyan [Sat, 3 Feb 2018 05:12:58 +0000 (21:12 -0800)]
drm/tegra: Handle 64-bit return from drm_crtc_vblank_count()
570e86963a51 ("drm: Widen vblank count to 64-bits [v3]") changed the
return type for drm_crtc_vblank_count() to u64. This could cause
potential problems if the return value is used in arithmetic operations
with a 32-bit reference HW vblank count. Explicitly typecasting this
down to u32 either fixes a potential problem or serves to add clarity in
case the implicit typecasting was already correct.
Cc: Keith Packard <keithp@keithp.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-6-dhinakaran.pandiyan@intel.com
Dhinakaran Pandiyan [Sat, 3 Feb 2018 05:12:57 +0000 (21:12 -0800)]
drm/radeon: Handle 64-bit return from drm_crtc_vblank_count()
570e86963a51 ("drm: Widen vblank count to 64-bits [v3]") changed the
return type for drm_crtc_vblank_count() to u64. This could cause
potential problems if the return value is used in arithmetic operations
with a 32-bit reference HW vblank count. Explicitly typecasting this down
to u32 either fixes a potential problem or serves to add clarity in case
the implicit typecasting was already correct.
Cc: Keith Packard <keithp@keithp.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-5-dhinakaran.pandiyan@intel.com
Dhinakaran Pandiyan [Sat, 3 Feb 2018 05:12:56 +0000 (21:12 -0800)]
drm/amdgpu: Handle 64-bit return from drm_crtc_vblank_count()
570e86963a51 ("drm: Widen vblank count to 64-bits [v3]") changed the
return type for drm_crtc_vblank_count() to u64. This could cause
potential problems if the return value is used in arithmetic operations
with a 32-bit reference HW vblank count. Explicitly typecasting this down
to u32 either fixes a potential problem or serves to add clarity in case
the typecasting was implicitly done.
Cc: Keith Packard <keithp@keithp.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com> for both this patch
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-4-dhinakaran.pandiyan@intel.com
Dhinakaran Pandiyan [Sat, 3 Feb 2018 05:12:55 +0000 (21:12 -0800)]
drm/i915: Handle 64-bit return from drm_crtc_vblank_count()
570e86963a51 ("drm: Widen vblank count to 64-bits [v3]") changed the
return type for drm_crtc_vblank_count() to u64, store all the bits
without truncating. There is no need to type cast this value down to
32-bits.
Cc: Keith Packard <keithp@keithp.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-3-dhinakaran.pandiyan@intel.com
Dhinakaran Pandiyan [Sat, 3 Feb 2018 05:12:54 +0000 (21:12 -0800)]
drm/i915/vblank: Make the vblank counter u64 -> u32 typecast explicit
Core returns a u64 vblank count and intel_crtc_get_vblank_counter()
expects a 32-bit value. Make the typecast explicit to add clarity.
Cc: Keith Packard <keithp@keithp.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-2-dhinakaran.pandiyan@intel.com
Dhinakaran Pandiyan [Sat, 3 Feb 2018 05:12:53 +0000 (21:12 -0800)]
drm/vblank: Data type fixes for 64-bit vblank sequences.
drm_vblank_count() has an u32 type returning what is a 64-bit vblank count.
The effect of this is when drm_wait_vblank_ioctl() tries to widen the user
space requested vblank sequence using this clipped 32-bit count(when the
value is >= 2^32) as reference, the requested sequence remains a 32-bit
value and gets queued like that. However, the code that checks if the
requested sequence has passed compares this against the 64-bit vblank
count.
With drm_vblank_count() returning all bits of the vblank count, update
drm_crtc_accurate_vblank_count() so that drm_crtc_arm_vblank_event() queues
the correct sequence. Otherwise, this leads to prolonged waits for a vblank
sequence when the current count is >=2^32.
Finally, fix drm_wait_one_vblank() too.
v2: Commit message fix (Keith)
Squash commits (Rodrigo)
Fixes:
570e86963a51 ("drm: Widen vblank count to 64-bits [v3]")
Cc: Keith Packard <keithp@keithp.com>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-1-dhinakaran.pandiyan@intel.com
Gustavo A. R. Silva [Wed, 14 Feb 2018 21:12:34 +0000 (15:12 -0600)]
drm/i915/selftests: fix inconsistent IS_ERR and PTR_ERR
Fix inconsistent IS_ERR and PTR_ERR in shrink_boom.
The proper pointer to use is _explode_ instead of _purge_.
This issue was detected with the help of Coccinelle.
Fixes:
fe215c8bc426 ("drm/i915/selftests: add missing gtt shrinker test")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214211234.GA22341@embeddedgus
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Thu, 15 Feb 2018 08:19:30 +0000 (08:19 +0000)]
drm/i915: Store platform_mask inside the static device info
Rather than deriving the platform_mask from the
intel_device_static_info->platform at runtime, pre-fill it in the static
data.
v2: Undefine macros at end of their scope
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180215081930.11477-3-chris@chris-wilson.co.uk
Chris Wilson [Thu, 15 Feb 2018 08:19:29 +0000 (08:19 +0000)]
drm/i915: Always define GEN as part of GENx_FEATURES
Be consistent and define the device's GEN as part of the GENx_FEATURE.
It will be overridden by the next gen upon inheriting, as per usual.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180215081930.11477-2-chris@chris-wilson.co.uk
Chris Wilson [Thu, 15 Feb 2018 08:19:28 +0000 (08:19 +0000)]
drm/i915: Store gen_mask inside the static device info
Rather than deriving the gen_mask from the static intel_device_info->gen
at runtime, pre-fill it in the static data.
v2: Undefine local macros at end of their scope.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180215081930.11477-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 15 Feb 2018 11:07:59 +0000 (11:07 +0000)]
drm/i915/gtt: Convert WARN_ON to GEM debugging
As we presume that we have sufficient coverage of CI for new machines
and new code paths, we do not need to have user impacting WARN_ON for
programming errors inside i915_gem_gtt.c, so convert those over to
GEM_BUG_ON. This leaves the memory debugging WARN_ON in place as they
are not so easy to exercise with CI.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180215110759.28603-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 14 Feb 2018 16:07:20 +0000 (16:07 +0000)]
drm/i915: Clean up ancient doc comments for i915_ioc32.c
As befitting a file dedicated to the mistakes of the past,
drivers/gpu/drm/i915/i915_ioc32.c:2: warning: Cannot understand * \file i915_ioc32.c
on line 2 - I thought it was a doc line
drivers/gpu/drm/i915/i915_ioc32.c:82: warning: Function parameter or member 'filp' not described in 'i915_compat_ioctl'
drivers/gpu/drm/i915/i915_ioc32.c:82: warning: Function parameter or member 'cmd' not described in 'i915_compat_ioctl'
drivers/gpu/drm/i915/i915_ioc32.c:82: warning: Function parameter or member 'arg' not described in 'i915_compat_ioctl'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214160720.19673-1-chris@chris-wilson.co.uk
Jani Nikula [Wed, 14 Feb 2018 17:38:40 +0000 (19:38 +0200)]
drm/i915/audio: fix check for av_enc_map overflow
Turns out -1 >= ARRAY_SIZE() is always true. Move the bounds check where
we know pipe >= 0 and next to the array indexing where it makes most
sense.
Fixes:
9965db26ac05 ("drm/i915: Check for fused or unused pipes")
Fixes:
0b7029b7e43f ("drm/i915: Check for fused or unused pipes")
Cc: <stable@vger.kernel.org> # v4.10+
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214173840.25360-1-jani.nikula@intel.com
Rodrigo Vivi [Wed, 14 Feb 2018 20:42:05 +0000 (12:42 -0800)]
drm/i915/cnl: Remove alpha_support protection
We now have a stable cnl on our CI and it seems mostly
green without big risks of blank screen or anything
blowing up on linux installations in the future.
As a reminder i915.alpha_support was created to protect
future linux installation's iso images that might contain a
kernel from the enabling time of the new platform. Without this
protection most of linux installation was recommending
nomodeset option during installation that was getting stick
there after installation.
Specifically, alpha support says nothing about the development
state of the hardware, and everything about the state of the
driver in a kernel release.
This is semantically no different from the old
preliminary_hw_support flag, but the old one was all too often
interpreted as (preliminary hw) support instead of the intended
(preliminary) hw support, and it was misleading for everyone.
Hence the rename.
v2: Fix the typos and include more history about the parameter
rename on commit message. (Jani)
Reference: https://intel-gfx-ci.01.org/tree/drm-tip/fi-cnl-y3.html
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214204205.4446-1-rodrigo.vivi@intel.com
Rodrigo Vivi [Thu, 8 Feb 2018 07:32:19 +0000 (23:32 -0800)]
drm/i915/cnl: Sync PCI ID with Spec.
Add one missing PCI ID and sort them in a way
that gets easier to review and compare against spec's
table.
When trying to sync libdrm and mesa id list with kernel
and spec I noticed something was wrong and we were missing
a pci id. So to make our lives easier when checking against
spec let's simplify and sort like spec does.
BSpec: 13621
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208073219.27860-1-rodrigo.vivi@intel.com
Daniele Ceraolo Spurio [Wed, 14 Feb 2018 19:18:25 +0000 (11:18 -0800)]
drm/i915: Fix rsvd2 mask when out-fence is returned
GENMASK_ULL wants the high bit of the mask first. The current value
cancels the in-fence when an out-fence is returned.
Fixes:
fec0445caa273 ("drm/i915: Support explicit fencing for execbuf")
Testcase: igt/gem_exec_fence/keep-in-fence*
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214191827.8465-1-daniele.ceraolospurio@intel.com
Cc: <stable@vger.kernel.org> # v4.12+
Chris Wilson [Wed, 14 Feb 2018 14:03:03 +0000 (14:03 +0000)]
drm/i915: Fixup kerneldoc for intel_pm.c
drivers/gpu/drm/i915/intel_pm.c:750: warning: Function parameter or member 'fifo_size' not described in 'intel_calculate_wm'
drivers/gpu/drm/i915/intel_pm.c:5900: warning: Function parameter or member 'crtc' not described in 'intel_update_watermarks'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214140303.1561-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Chris Wilson [Wed, 14 Feb 2018 13:49:22 +0000 (13:49 +0000)]
drm/i915: Fixup kerneldoc
drivers/gpu/drm/i915/intel_display.c:569: warning: Function parameter or member 'dev_priv' not described in 'intel_PLL_is_valid'
drivers/gpu/drm/i915/intel_display.c:569: warning: Function parameter or member 'limit' not described in 'intel_PLL_is_valid'
drivers/gpu/drm/i915/intel_display.c:569: warning: Function parameter or member 'clock' not described in 'intel_PLL_is_valid'
drivers/gpu/drm/i915/intel_display.c:4769: warning: Function parameter or member 'crtc_state' not described in 'skl_update_scaler_plane'
drivers/gpu/drm/i915/intel_display.c:4769: warning: Excess function parameter 'state' description in 'skl_update_scaler_plane'
drivers/gpu/drm/i915/intel_display.c:4967: warning: Function parameter or member 'new_crtc_state' not described in 'intel_post_enable_primary'
drivers/gpu/drm/i915/intel_display.c:12650: warning: Function parameter or member 'new_state' not described in 'intel_prepare_plane_fb'
drivers/gpu/drm/i915/intel_display.c:12650: warning: Excess function parameter 'fb' description in 'intel_prepare_plane_fb'
drivers/gpu/drm/i915/intel_display.c:12763: warning: Function parameter or member 'old_state' not described in 'intel_cleanup_plane_fb'
drivers/gpu/drm/i915/intel_display.c:12763: warning: Excess function parameter 'fb' description in 'intel_cleanup_plane_fb'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214134922.28761-2-chris@chris-wilson.co.uk
Chris Wilson [Wed, 14 Feb 2018 13:49:21 +0000 (13:49 +0000)]
drm/i915/atomic: Fixup kerneldoc
drivers/gpu/drm/i915/intel_atomic.c:198: warning: Function parameter or member 'state' not described in 'intel_crtc_destroy_state'
drivers/gpu/drm/i915/intel_atomic.c:222: warning: Function parameter or member 'intel_crtc' not described in 'intel_atomic_setup_scalers'
drivers/gpu/drm/i915/intel_atomic.c:222: warning: Excess function parameter 'crtc' description in 'intel_atomic_setup_scalers'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214134922.28761-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Chris Wilson [Wed, 14 Feb 2018 10:53:32 +0000 (10:53 +0000)]
drm/i915: Fixup kerneldoc for intel_uc_fw_upload()
Just a parameter name change that was lost to kerneldoc.
drivers/gpu/drm/i915/intel_uc_fw.c:209: warning: Function parameter or member 'xfer' not described in 'intel_uc_fw_upload'
drivers/gpu/drm/i915/intel_uc_fw.c:209: warning: Excess function parameter 'loader' description in 'intel_uc_fw_upload'
v2: Add the Returns:
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214105332.30230-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 14 Feb 2018 10:40:40 +0000 (10:40 +0000)]
drm/i915: Add missing kerneldoc parameters for huc_ucode_xfer
During the recent upheaval to uc, the parameters to huc_ucode_xfer
were changed, but the kerneldoc left behind.
drivers/gpu/drm/i915/intel_huc.c:128: warning: Function parameter or member 'huc_fw' not described in 'huc_ucode_xfer'
drivers/gpu/drm/i915/intel_huc.c:128: warning: Function parameter or member 'vma' not described in 'huc_ucode_xfer'
drivers/gpu/drm/i915/intel_huc.c:128: warning: Excess function parameter 'dev_priv' description in 'huc_ucode_xfer'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214104040.4532-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 14 Feb 2018 09:29:09 +0000 (09:29 +0000)]
drm/i915/lvds: Fixup commentary
Remove the kerneldoc markup applied to non-kerneldoc comments and
convert the multiline comments to the canonical style.
drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'encoder' not described in 'intel_enable_lvds'
drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'pipe_config' not described in 'intel_enable_lvds'
drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'conn_state' not described in 'intel_enable_lvds'
drivers/gpu/drm/i915/intel_lvds.c:453: warning: Function parameter or member 'connector' not described in 'intel_lvds_detect'
drivers/gpu/drm/i915/intel_lvds.c:453: warning: Function parameter or member 'force' not described in 'intel_lvds_detect'
drivers/gpu/drm/i915/intel_lvds.c:471: warning: Function parameter or member 'connector' not described in 'intel_lvds_get_modes'
drivers/gpu/drm/i915/intel_lvds.c:932: warning: Function parameter or member 'dev_priv' not described in 'intel_lvds_init'
drivers/gpu/drm/i915/intel_lvds.c:932: warning: Excess function parameter 'dev' description in 'intel_lvds_init'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214092909.27040-4-chris@chris-wilson.co.uk
Chris Wilson [Wed, 14 Feb 2018 09:29:08 +0000 (09:29 +0000)]
drm/i915/dvo: Fixup commentary
Remove the kerneldoc markup applied to non-kerneldoc comments and
convert the multiline comments to the canonical style.
drivers/gpu/drm/i915/intel_dvo.c:303: warning: Function parameter or member 'connector' not described in 'intel_dvo_detect'
drivers/gpu/drm/i915/intel_dvo.c:303: warning: Function parameter or member 'force' not described in 'intel_dvo_detect'
drivers/gpu/drm/i915/intel_dvo.c:382: warning: Function parameter or member 'encoder' not described in 'intel_dvo_get_current_mode'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214092909.27040-3-chris@chris-wilson.co.uk
Chris Wilson [Wed, 14 Feb 2018 09:29:07 +0000 (09:29 +0000)]
drm/i915/dvo: Remove incorrect kerneldoc markups
Regular comments where being marked up for kerneldoc, but were not
formatted properly. Remove the markup to remove the warnings.
drivers/gpu/drm/i915/dvo_ivch.c:192: warning: Function parameter or member 'dvo' not described in 'ivch_read'
drivers/gpu/drm/i915/dvo_ivch.c:192: warning: Function parameter or member 'addr' not described in 'ivch_read'
drivers/gpu/drm/i915/dvo_ivch.c:192: warning: Function parameter or member 'data' not described in 'ivch_read'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214092909.27040-2-chris@chris-wilson.co.uk
Chris Wilson [Wed, 14 Feb 2018 09:29:06 +0000 (09:29 +0000)]
drm/i915/crt: Remove obsolete kerneldoc-esque comment
The code describes what it is doing quite well; and that is now much
more complex than what the old comment would let you believe.
drivers/gpu/drm/i915/intel_crt.c:486: warning: Function parameter or member 'connector' not described in 'intel_crt_detect_hotplug'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214092909.27040-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 14 Feb 2018 09:17:47 +0000 (09:17 +0000)]
drm/i915/panel: Split range scaling calculation for readiblity
Split the 64b multiplication from the division so that it doesn't sprawl
across a couple of lines and use mul_u32_u32() instead of open-coding
the 64b conversion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214091747.12753-2-chris@chris-wilson.co.uk
Chris Wilson [Wed, 14 Feb 2018 09:17:46 +0000 (09:17 +0000)]
drm/i915/panel: Add missing parameters to kerneldoc
drivers/gpu/drm/i915/intel_panel.c:409: warning: Function parameter or member 'source_min' not described in 'scale'
drivers/gpu/drm/i915/intel_panel.c:409: warning: Function parameter or member 'source_max' not described in 'scale'
drivers/gpu/drm/i915/intel_panel.c:409: warning: Function parameter or member 'target_min' not described in 'scale'
drivers/gpu/drm/i915/intel_panel.c:409: warning: Function parameter or member 'target_max' not described in 'scale'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214091747.12753-1-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20180214091747.12753-2-chris@chris-wilson.co.uk
Chris Wilson [Wed, 14 Feb 2018 09:09:05 +0000 (09:09 +0000)]
drm/i915/sdvo: Tidy up commentary
Drop the kerneldoc markup from the non-kerneldoc comments and convert
the multi-line comments to the canonical format.
drivers/gpu/drm/i915/intel_sdvo.c:223: warning: Function parameter or member 'intel_sdvo' not described in 'intel_sdvo_write_sdvox'
drivers/gpu/drm/i915/intel_sdvo.c:223: warning: Function parameter or member 'val' not described in 'intel_sdvo_write_sdvox'
drivers/gpu/drm/i915/intel_sdvo.c:653: warning: Function parameter or member 'intel_sdvo' not described in 'intel_sdvo_get_trained_inputs'
drivers/gpu/drm/i915/intel_sdvo.c:653: warning: Function parameter or member 'input_1' not described in 'intel_sdvo_get_trained_inputs'
drivers/gpu/drm/i915/intel_sdvo.c:653: warning: Function parameter or member 'input_2' not described in 'intel_sdvo_get_trained_inputs'
drivers/gpu/drm/i915/intel_sdvo.c:2311: warning: Function parameter or member 'dev_priv' not described in 'intel_sdvo_select_ddc_bus'
drivers/gpu/drm/i915/intel_sdvo.c:2311: warning: Function parameter or member 'sdvo' not described in 'intel_sdvo_select_ddc_bus'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214090905.4747-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 14 Feb 2018 08:58:14 +0000 (08:58 +0000)]
drm/i915/tv: Cleanup up obsolete comments
The ages old kerneldoc-esque comments still refer to the original stubs
and not the more complete functions. As they were only describing the
external entry points (or at least thought themselves to be, they had
drifted!), they don't provide any commentary for the code flow.
drivers/gpu/drm/i915/intel_tv.c:379: warning: cannot understand function prototype: 'const struct tv_mode tv_modes[] = '
drivers/gpu/drm/i915/intel_tv.c:1133: warning: bad line:
drivers/gpu/drm/i915/intel_tv.c:1140: warning: Function parameter or member 'intel_tv' not described in 'intel_tv_detect_type'
drivers/gpu/drm/i915/intel_tv.c:1140: warning: Function parameter or member 'connector' not described in 'intel_tv_detect_type'
drivers/gpu/drm/i915/intel_tv.c:1272: warning: Function parameter or member 'connector' not described in 'intel_tv_detect'
drivers/gpu/drm/i915/intel_tv.c:1272: warning: Function parameter or member 'ctx' not described in 'intel_tv_detect'
drivers/gpu/drm/i915/intel_tv.c:1272: warning: Function parameter or member 'force' not described in 'intel_tv_detect'
drivers/gpu/drm/i915/intel_tv.c:1351: warning: Function parameter or member 'connector' not described in 'intel_tv_get_modes'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214085814.2565-1-chris@chris-wilson.co.uk
Hans de Goede [Wed, 14 Feb 2018 08:21:51 +0000 (09:21 +0100)]
drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence v3
So far models of the Dell Venue 8 Pro, with a panel with MIPI panel
index = 3, one of which has been kindly provided to me by Jan Brummer,
where not working with the i915 driver, giving a black screen on the
first modeset.
The problem with at least these Dells is that their VBT defines a MIPI
ASSERT sequence, but not a DEASSERT sequence. Instead they DEASSERT the
reset in their INIT_OTP sequence, but the deassert must be done before
calling intel_dsi_device_ready(), so that is too late.
Simply doing the INIT_OTP sequence earlier is not enough to fix this,
because the INIT_OTP sequence also sends various MIPI packets to the
panel, which can only happen after calling intel_dsi_device_ready().
This commit fixes this by splitting the INIT_OTP sequence into everything
before the first DSI packet and everything else, including the first DSI
packet. The first part (everything before the first DSI packet) is then
used as deassert sequence.
Changed in v2:
-Split the init OTP sequence into a deassert reset and the actual init
OTP sequence, instead of calling it earlier and then having the first
mipi_exec_send_packet() call call intel_dsi_device_ready().
Changes in v3:
-Move the whole shebang to intel_bios.c
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82880
References: https://bugs.freedesktop.org/show_bug.cgi?id=101205
Cc: Jan-Michael Brummer <jan.brummer@tabos.org>
Reported-by: Jan-Michael Brummer <jan.brummer@tabos.org>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214082151.25015-3-hdegoede@redhat.com
Hans de Goede [Wed, 14 Feb 2018 08:21:50 +0000 (09:21 +0100)]
drm/i915: Free memdup-ed DSI VBT data structures on driver_unload
Make intel_bios_cleanup function free the DSI VBT data structures which
are memdup-ed by parse_mipi_config() and parse_mipi_sequence().
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214082151.25015-2-hdegoede@redhat.com
Hans de Goede [Wed, 14 Feb 2018 08:21:49 +0000 (09:21 +0100)]
drm/i915: Add intel_bios_cleanup() function
Add an intel_bios_cleanup() function to act as counterpart of
intel_bios_init() and move the cleanup of vbt related resources there,
putting it in the same file as the allocation.
Changed in v2:
-While touching the code anyways, remove the unnecessary:
if (dev_priv->vbt.child_dev) done before kfree(dev_priv->vbt.child_dev)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214082151.25015-1-hdegoede@redhat.com
Joonas Lahtinen [Wed, 14 Feb 2018 09:38:27 +0000 (11:38 +0200)]
drm/i915: Update DRIVER_DATE to
20180214
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Tvrtko Ursulin [Thu, 8 Feb 2018 16:00:36 +0000 (16:00 +0000)]
drm/i915: Handle RC6 counter wrap
We can implement limited RC6 counter wrap-around protection under the
assumption that clients will be reading this value more frequently than
the wrap period on a given platform.
With the typical wrap-around period being ~90 minutes, even with the
exception of Baytrail which wraps every 13 seconds, this sounds like a
reasonable assumption.
Implementation works by storing a 64-bit software copy of a hardware RC6
counter, along with the previous HW counter snapshot. This enables it to
detect wrap is polled frequently enough and keep the software copy
monotonically incrementing.
v2:
* Missed GEN6_GT_GFX_RC6_LOCKED when considering slot sizing and
indexing.
* Fixed off-by-one in wrap-around handling. (Chris Wilson)
v3:
* Simplify index checking by using unsigned int. (Chris Wilson)
* Expand the comment to explain why indexing works.
v4:
* Use __int128 if supported.
v5:
* Use mul_u64_u32_div. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94852
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v3
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208160036.29919-1-tvrtko.ursulin@linux.intel.com
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tvrtko Ursulin [Tue, 13 Feb 2018 14:18:33 +0000 (14:18 +0000)]
drm/i915: Fix i915_gem_context.h header
Header uses I915_NUM_ENGINES so needs to include i915.gem.h, and also
it uses requests so we can forward declare struct drm_i915_gem_request.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180213141833.17012-1-tvrtko.ursulin@linux.intel.com
Jani Nikula [Mon, 5 Feb 2018 17:31:39 +0000 (19:31 +0200)]
drm/i915: introduce INTEL_PCH_ID() and use it
Cleanup similar to INTEL_PCH_TYPE(). No functional changes.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/798893c24728a1c766cb21c57ae0943e5859c897.1517851783.git.jani.nikula@intel.com
Jani Nikula [Mon, 5 Feb 2018 17:31:38 +0000 (19:31 +0200)]
drm/i915: have virtual PCH detection return a PCH id
Simplify intel_virt_detect_pch() by making it return a PCH id rather
than returning the PCH type and setting PCH id for some PCHs. Map the
PCH id to PCH type using the shared routine. This gives us sanity check
on the supported combinations also in the virtualized setting.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/197cf635261a1c628371ffaaee90e8647493af4d.1517851783.git.jani.nikula@intel.com
Jani Nikula [Mon, 5 Feb 2018 17:31:37 +0000 (19:31 +0200)]
drm/i915: abstract virtual PCH id detection
Make the code slightly more pleasant to look at. No functional changes.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/38ee1ac06c6724e888679eb287af36c221bd399b.1517851783.git.jani.nikula@intel.com
Jani Nikula [Mon, 5 Feb 2018 17:31:36 +0000 (19:31 +0200)]
drm/i915: abstract PCH type detection from PCH id
Make the logic in intel_detect_pch() easier to follow, and make the PCH
id to type mapping reusable. No functional changes.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3bd4ffcd284cdbd4e8dc77ab02d97ded422e0c21.1517851783.git.jani.nikula@intel.com
Chris Wilson [Tue, 13 Feb 2018 12:09:40 +0000 (12:09 +0000)]
drm/i915/selftests: Report setup errors for igt_partial_tiling
igt_partial_tiling managed to fail with an -EBUSY. This usually means a
pin leak, but that should be impossible given the test setup. Add a
couple of error messages to help identify the path that failed.
References: https://bugs.freedesktop.org/show_bug.cgi?id=105073
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180213120940.21579-1-chris@chris-wilson.co.uk
Mahesh Kumar [Mon, 5 Feb 2018 17:21:31 +0000 (15:21 -0200)]
drm/i915/icl: program mbus during pipe enable
This patch program default values of MBus credit during pipe enable.
Changes Since V1:
- Add WARN_ON (Paulo)
- Remove TODO comment
- Program 0 during pipe disable
- Rebase
Changes since V2:
- We don't need to do anything when disabling the pipe
Changes since V3 (from Paulo):
- Remove WARN() that we'll never be able to trigger (Ville).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205172131.20255-1-paulo.r.zanoni@intel.com
Mahesh Kumar [Mon, 5 Feb 2018 15:40:45 +0000 (13:40 -0200)]
drm/i915/icl: initialize MBus during display init
This patch initializes MBus during display initialization.
Changes since V2 (from Paulo):
- Don't forget to remove the WARN_ON(1) call.
Changes since V1:
- Rebase to use function like Macros
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205154046.11485-6-paulo.r.zanoni@intel.com
Mahesh Kumar [Mon, 5 Feb 2018 15:40:44 +0000 (13:40 -0200)]
drm/i915/icl: Enable both DBuf slices during init
ICL has 2 slices of DBuf, enable both the slices during display init.
Ideally we should only enable the second slice when needed in order to
save power, but while we're not there yet, adopt the simpler solution
to keep us bug-free.
v2 (from Paulo):
- Add the TODO comment.
- Reorganize where things are defined.
- Fix indentation.
- Remove unnecessary POSTING_READ() calls.
- Improve the commit message.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205154046.11485-5-paulo.r.zanoni@intel.com
Paulo Zanoni [Mon, 5 Feb 2018 15:40:43 +0000 (13:40 -0200)]
drm/i915/icl: implement the display init/uninit sequences
This code is similar enough to the CNL code that I considered just
adding ICL support to the CNL function, but I think it's still
different enough, and having a function specific to ICL allows us to
more easily adapt code in case the spec changes more later.
We're still missing the power wells and the mbus code, so leave those
pieces with a FIXME comment while they're not here yet.
v2: Don't use _PICK, don't WARN_ON(1), don't forget the chicken bits.
v3: Use _MMIO_PORT() (Ville).
Reviewed-by: James Ausmus <james.ausmus@intel.com> (v2)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205154046.11485-4-paulo.r.zanoni@intel.com
Paulo Zanoni [Tue, 6 Feb 2018 19:33:46 +0000 (17:33 -0200)]
drm/i915/icl: add the main CDCLK functions
This commit adds the basic CDCLK functions, but it's still missing
pieces of the display initialization sequence.
v2:
- Implement the voltage levels.
- Rebase.
v3:
- Adjust to the new "bypass" clock (Imre).
- Call intel_dump_cdclk_state() too.
- Rename a variable to avoid confusion.
- Simplify the DVFS part.
v4:
- Remove wrong bit definition (James).
- Also drive-by fix the coding style for the register definition we
touched.
v5:
- Comment style (checkpatch).
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180206193346.18272-1-paulo.r.zanoni@intel.com
Paulo Zanoni [Mon, 5 Feb 2018 15:40:41 +0000 (13:40 -0200)]
drm/i915/icl: add ICL support to cnl_set_procmon_ref_values
On ICL we have two sets of registers: one for port A and another for
port B. The set of port A registers is the same as the CNL registers.
Since the procmon table on ICL is the same we want to reuse the CNL
function. To do that we add a port argument and make CNL always call
the function passing port A. This way, we'll be able to easily reuse
the function on ICL when we add icl_display_core_init().
v2: Don't use _PICK() when you can use a ternary operator.
v3: Don't use a ternary operation when you can use _MMIO_PORT (Ville).
Add an extra comment about why we're passing PORT_A (James).
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205154046.11485-2-paulo.r.zanoni@intel.com
David Weinehall [Fri, 9 Feb 2018 13:07:55 +0000 (15:07 +0200)]
drm/i915: Fix incorrect comment
While the comment singles out Port A or B, the code says Port A or *D*.
Looking at the history it seems that the comment was added after the code,
so it seems likely that the code is correct, not the comment.
CC: Jani Nikula <jani.nikula@intel.com>
CC: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180209130755.11893-1-david.weinehall@linux.intel.com
Chris Wilson [Mon, 12 Feb 2018 13:31:18 +0000 (13:31 +0000)]
drm/i915: Replace open-coded memset_p()
When initialising the page directories, we set the GTT entries and the
tree to the scratch page. We have already replaced the DMA fill with
memset64(), but we can similarly use memset_p() to set the pointer array.
References:
4dd504f7d98a ("drm/i915: Use memset64() to prefill the GTT page")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180212133118.16443-1-chris@chris-wilson.co.uk
Imre Deak [Thu, 8 Feb 2018 17:41:02 +0000 (19:41 +0200)]
drm/i915: Don't query PCODE RC6VIDS on platforms not supporting it
On BXT/GLK GEN6_PCODE_READ_RC6VIDS fails with
MAILBOX_P24C_CC_ILLEGAL_CMD, so don't try to do the query on these
platforms. Do it only on SNB, IVB and HSW, where we use this command
anyway for RC6 enabling.
Based on my tests the command also succeeds on all LLC platforms, but
it's not clear if it's really supported on those (it returns 0 aka 245mv
for all RC6 states everywhere except on SNB). BSpec lists the command as
supported on SKL+ (see P24C_PCODE_MAILBOX_INTERFACE) but that's clearly
incorrect, since on SKL/KBL the same command ID is used for
SKL_PCODE_LOAD_HDCP_KEYS. Since the command fails on BXT/GLK, the BSpec
command list is also incorrect for those platforms (see
P_CR_P24C_PCODE_MAILBOX_INTERFACE_0_2_0_GTTMMADR).
I filed a request to update that info in Bspec, but for now let's
assume a minimal set of platforms where the command is supported.
References: https://bugs.freedesktop.org/show_bug.cgi?id=103337
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208174102.10240-1-imre.deak@intel.com
Chris Wilson [Mon, 12 Feb 2018 10:24:15 +0000 (10:24 +0000)]
drm/i915: Hold rpm wakeref for printing the engine's register state
When dumping the engine, we print out the current register values. This
requires the rpm wakeref. If the device is alseep, we can assume the
engine is asleep (and the register state is uninteresting) so skip and
only acquire the rpm wakeref if the device is already awake.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180212102415.24246-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 12 Feb 2018 09:39:28 +0000 (09:39 +0000)]
drm/i915: Don't wake the device up to check if the engine is asleep
If the entire device is powered off, we can safely assume that the
engine is also asleep (and idle).
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes:
a091d4ee931b ("drm/i915: Hold a wakeref for probing the ring registers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180212093928.6005-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 9 Feb 2018 11:40:56 +0000 (11:40 +0000)]
drm/i915: Move the final intel_gpu_reset() to after declaring wedged
If we fail to reset the GPU (i915_reset()), we do one final
intel_gpu_reset() attempt as we mark the device wedged. The idea here is
even though the GPU has proven unreliable (and so we want to stop using
it for the time being), we don't want it spinning away in the background
whilst the driver idles so we try to reset it one more time. However, we
want to dump the i915_gem_set_wedged() debugging info before we do, so
that we can see the accurate state of the GPU when it failed.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180209114056.9957-1-chris@chris-wilson.co.uk
Tvrtko Ursulin [Fri, 9 Feb 2018 21:58:47 +0000 (21:58 +0000)]
drm/i915: Replace some negative Gen checks
Instead of INTEL_GEN != x use !IS_GENx for more optimisation
opportunities.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208130606.15556-16-tvrtko.ursulin@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180209215847.6660-2-chris@chris-wilson.co.uk
Tvrtko Ursulin [Fri, 9 Feb 2018 21:58:46 +0000 (21:58 +0000)]
drm/i915: Use INTEL_GEN everywhere
Coccinelle patch:
@@
identifier p;
@@
-INTEL_INFO(p)->gen
+INTEL_GEN(p)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208130606.15556-12-tvrtko.ursulin@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180209215847.6660-1-chris@chris-wilson.co.uk
Ville Syrjälä [Wed, 7 Feb 2018 16:48:41 +0000 (18:48 +0200)]
drm/i915: Give all ioctl functions an _ioctl suffix
Most of our ioctl functions have an _ioctl suffix in the name. I like
that idea since it makes it easy to figure out how the function is
going to get called. Rename the handful of exceptions to follow the
same pattern.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180207164841.19431-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Tue, 6 Feb 2018 20:43:33 +0000 (22:43 +0200)]
drm/i915: Reject undefined colorkey flags
Check that userspace isn't passing in garbage in the colorkey
ioctl flags.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180206204333.4399-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Imre Deak [Thu, 8 Feb 2018 11:23:31 +0000 (13:23 +0200)]
drm/i915/snb+: Remove incorrect forcewake check in debugfs/i915_drpc_info
FORCEWAKE_ACK is depricated by BSpec at least starting from BDW,
referring to the multi-threaded version of it instead. Accessing
FORCEWAKE_ACK triggers an unclaimed register access error - at
least on GLK - see the Reference: below.
The correct registers to use would be FORCEWAKE_MT_ACK on IVB+ and
FORCEWAKE_ACK_RENDER_GEN9 on SKL+ like it's done elsewhere in the
driver.
The forcewake check itself is inconsistent and redundant, since there
could be other forcewake requesters besides the kernel (being the
multithreaded version of the register) and the kernel's per-domain
forcewake counters are shown anyway at the end of the file. So let's
just remove the check.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=103337
Signed-off-by: Imre Deak <imre.deak@intel.com>
Tested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208112331.12986-1-imre.deak@intel.com
Chris Wilson [Thu, 8 Feb 2018 15:12:24 +0000 (15:12 +0000)]
drm/i915: Remove redundant check on execlists interrupt
Since commit
4a118ecbe99c ("drm/i915: Filter out spurious execlists
context-switch interrupts") we probe execlists->active, and no longer
have to peek at the execlist interrupt to determine if the tasklet still
needs to be run to drain the ELSP.
References:
4a118ecbe99c ("drm/i915: Filter out spurious execlists context-switch interrupts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208151224.16285-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 8 Feb 2018 16:39:39 +0000 (16:39 +0000)]
drm/i915/crt: Silence compiler warning for uninitialised status
clang is confused by our if-else-chain that abruptly exits before a
final else:
drivers/gpu/drm/i915/intel_crt.c:821:11: warning: variable 'status' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
else if (ret < 0)
^~~~~~~
drivers/gpu/drm/i915/intel_crt.c:826:9: note: uninitialized use occurs here
return status;
^~~~~~
drivers/gpu/drm/i915/intel_crt.c:821:7: note: remove the 'if' if its condition is always true
else if (ret < 0)
^~~~~~~~~~~~
drivers/gpu/drm/i915/intel_crt.c:761:12: note: initialize the variable 'status' to silence this warning
int status, ret;
In this case, we can reduce the final else-if clause to an unconditional
else.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208163939.27030-1-chris@chris-wilson.co.uk
Chris Wilson [Sat, 9 Dec 2017 22:21:33 +0000 (22:21 +0000)]
drm/i915: Avoid leaking lpe audio platdev.data
The struct platform_device memdups the provided data pointer requiring
us to free the template we construct during lpe_audio_platdev_create():
unreferenced object 0xffff88026eafe400 (size 512):
comm "insmod", pid 6850, jiffies
4295060179 (age 22.300s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
000000008e4a834c>] intel_audio_init+0x9/0x30 [i915]
[<
000000001360e195>] i915_driver_load+0x802/0x14e0 [i915]
[<
00000000ab3f0e99>] i915_pci_probe+0x29/0x70 [i915]
[<
0000000016330ee5>] pci_device_probe+0x9c/0x120
[<
000000000257d054>] driver_probe_device+0x307/0x470
[<
000000009f0a6cb6>] __driver_attach+0x98/0xe0
[<
0000000031b46e58>] bus_for_each_dev+0x57/0x80
[<
000000000e28239d>] bus_add_driver+0x1bd/0x260
[<
00000000abbe5161>] driver_register+0x52/0xc0
[<
000000005c6e23d4>] do_one_initcall+0x36/0x150
[<
00000000a55002f4>] do_init_module+0x56/0x1d7
[<
00000000e48f2217>] load_module+0x23c8/0x2910
[<
000000002b60bf61>] SyS_finit_module+0xb8/0xd0
[<
0000000041cbad96>] entry_SYSCALL_64_fastpath+0x17/0x70
[<
000000009f1d37ab>] 0xffffffffffffffff
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171209222133.31880-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 8 Feb 2018 16:16:39 +0000 (16:16 +0000)]
drm/i915: Disable unused-but-set compiler warning
The unused-but-set warning enabled by W=1 catches out a lot of the
atomic helper iterator macros and drown us in their noise (or trip over
Werror and die). Path of least resistance is to ignore the warning.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208161639.27511-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Chris Wilson [Thu, 8 Feb 2018 11:42:24 +0000 (11:42 +0000)]
drm/i915: Fix kerneldoc warnings for i915_gem_internal
drivers/gpu/drm/i915/i915_gem_internal.c:183: warning: No description found for parameter 'i915'
drivers/gpu/drm/i915/i915_gem_internal.c:183: warning: No description found for parameter 'size'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208114224.27271-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Thu, 8 Feb 2018 11:39:17 +0000 (11:39 +0000)]
drm/i915: Fix kerneldoc warnings in i915_gem_execbuffer
drivers/gpu/drm/i915/i915_gem_execbuffer.c:1983: warning: No description found for parameter 'dev_priv'
drivers/gpu/drm/i915/i915_gem_execbuffer.c:1983: warning: No description found for parameter 'file'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208113917.8439-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 8 Feb 2018 10:54:49 +0000 (10:54 +0000)]
drm/i915: Fix kerneldoc parameter markup
drivers/gpu/drm/i915/i915_syncmap.c:92: warning: No description found for parameter 'root'
drivers/gpu/drm/i915/i915_syncmap.c:155: warning: No description found for parameter 'root'
drivers/gpu/drm/i915/i915_syncmap.c:155: warning: No description found for parameter 'id'
drivers/gpu/drm/i915/i915_syncmap.c:155: warning: No description found for parameter 'seqno'
drivers/gpu/drm/i915/i915_syncmap.c:354: warning: No description found for parameter 'root'
drivers/gpu/drm/i915/i915_syncmap.c:354: warning: No description found for parameter 'id'
drivers/gpu/drm/i915/i915_syncmap.c:354: warning: No description found for parameter 'seqno'
drivers/gpu/drm/i915/i915_syncmap.c:396: warning: No description found for parameter 'root'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208105449.29880-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Thu, 8 Feb 2018 10:54:48 +0000 (10:54 +0000)]
drm/i915: Add missing kerneldoc for 'ent' in i915_driver_init_early
drivers/gpu/drm/i915/i915_drv.c:891: warning: No description found for parameter 'ent'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208105449.29880-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Thu, 8 Feb 2018 11:15:59 +0000 (11:15 +0000)]
drm/i915: Remove lost comment from i915_gem_context
The comment is very old and quite misleading now.
drivers/gpu/drm/i915/i915_gem_context.c:349: warning: No description found for parameter 'dev_priv'
drivers/gpu/drm/i915/i915_gem_context.c:349: warning: No description found for parameter 'file_priv'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208111559.32663-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 8 Feb 2018 11:14:53 +0000 (11:14 +0000)]
drm/i915: Fix kerneldoc warnings for i915_gem_request
drivers/gpu/drm/i915/i915_gem_request.c:941: warning: No description found for parameter 'write'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208111453.32567-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 8 Feb 2018 11:13:28 +0000 (11:13 +0000)]
drm/i915: Fix kerneldoc warnings for i915_gem_userptr
drivers/gpu/drm/i915/i915_gem_userptr.c:761: warning: No description found for parameter 'dev'
drivers/gpu/drm/i915/i915_gem_userptr.c:761: warning: No description found for parameter 'data'
drivers/gpu/drm/i915/i915_gem_userptr.c:761: warning: No description found for parameter 'file'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208111328.32422-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 8 Feb 2018 11:12:20 +0000 (11:12 +0000)]
drm/i915: Fix kerneldoc warnings for intel_ringbuffer
drivers/gpu/drm/i915/intel_ringbuffer.c:179: warning: No description found for parameter 'req'
drivers/gpu/drm/i915/intel_ringbuffer.c:741: warning: No description found for parameter 'req'
drivers/gpu/drm/i915/intel_ringbuffer.c:741: warning: No description found for parameter 'cs'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208111220.32293-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 8 Feb 2018 11:11:05 +0000 (11:11 +0000)]
drm/i915: Fix kerneldoc warnings for i915_gpu_error
drivers/gpu/drm/i915/i915_gpu_error.c:1815: warning: No description found for parameter 'dev_priv'
drivers/gpu/drm/i915/i915_gpu_error.c:1815: warning: No description found for parameter 'engine_mask'
drivers/gpu/drm/i915/i915_gpu_error.c:1815: warning: No description found for parameter 'error_msg'
drivers/gpu/drm/i915/i915_gpu_error.c:1815: warning: Excess function parameter 'dev' description in 'i915_capture_error_state'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208111105.32149-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 7 Feb 2018 22:28:24 +0000 (22:28 +0000)]
drm/i915: Wait for gen3 reset status to be asserted
After we assert the reset request (and wait for 20us), when the device
has been fully reset it asserts the reset-status bit. Before we stop
requesting the reset and allow the device to return to normal, we should
wait for the reset to be completed. (Similar to how we wait for the
device to return to normal after deasserting the reset request.)
v2: Rename i915_reset_completed() probe to not cause as much confusion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180207222824.29864-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Chris Wilson [Thu, 8 Feb 2018 07:28:00 +0000 (07:28 +0000)]
drm/i915: Be paranoid and post the writes to stop the rings
Although the mmio are uncached and so should be flushed on every write,
be paranoid and do a mmio read after setting the ring head/tail to be
sure they have taken effect before moving on.
v2: post tail to be pleasing to the eye
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208072800.595-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Chris Wilson [Wed, 7 Feb 2018 15:13:50 +0000 (15:13 +0000)]
drm/i915: Mark the device as wedged from the beginning of set-wedged
Reduce the window of opportunity for set-wedged being called
concurrently with reset (after i915_reset() has performed the
i915_gem_unset_wedged()) by moving the set_bit(I915_WEDGED) to before we
complete the inflight requests. When i915_reset() is being blocked on a
request, such completion may allow it to start and beginning resetting
the GPU before i915_gem_set_wedged() has finished (and so before
set-wedge will have marked the device as wedged). As such,
i915_gem_init_hw() may see a wedged device even from inside
i915_reset().
References:
36703e79a982 ("drm/i915: Break modeset deadlocks on reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180207151350.20883-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 8 Feb 2018 08:51:51 +0000 (08:51 +0000)]
drm/i915: Avoid truncation before clamping userspace's priority value
Userspace provides a 64b value for the priority, we need to be careful
to preserve the full range before validation to prevent truncation (and
letting an illegal value pass).
Reported-by: Antonio Argenziano <antonio.argenziano@intel.com>
Fixes:
ac14fbd460d0 ("drm/i915/scheduler: Support user-defined priorities")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208085151.11480-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Tue, 6 Feb 2018 14:31:37 +0000 (14:31 +0000)]
drm/i915: Remove superfluous worker wakeups when RPS is already boosted
We only need to wake up the RPS worker once when initially enabling the
client boost, it remains in effect then until the last client no longer
requires the boost.
References: https://bugs.freedesktop.org/show_bug.cgi?id=102250
References:
7b92c1bd0540 ("drm/i915: Avoid keeping waitboost active for signaling threads")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180206143137.15509-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 8 Feb 2018 10:24:03 +0000 (10:24 +0000)]
drm/i915/perf: Fix compiler warning for string truncation
drivers/gpu/drm/i915/i915_oa_cnl.c: In function ‘i915_perf_load_test_config_cnl’:
drivers/gpu/drm/i915/i915_oa_cnl.c:99:2: error: ‘strncpy’ output truncated before terminating nul copying 36 bytes from a string of the same length [-Werror=stringop-truncation]
v2: strlcpy
Fixes:
95690a02fb5d ("drm/i915/perf: enable perf support on CNL")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208102403.5587-2-chris@chris-wilson.co.uk
Chris Wilson [Thu, 8 Feb 2018 10:24:02 +0000 (10:24 +0000)]
drm/i915/perf: Fix compiler warning for string truncation
drivers/gpu/drm/i915/i915_oa_cflgt3.c: In function ‘i915_perf_load_test_config_cflgt3’:
drivers/gpu/drm/i915/i915_oa_cflgt3.c:87:2: error: ‘strncpy’ output truncated before terminating nul copying 36 bytes from a string of the same length [-Werror=stringop-truncation]
v2: strlcpy
Fixes:
4407eaa9b0cc ("drm/i915/perf: add support for Coffeelake GT3")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208102403.5587-1-chris@chris-wilson.co.uk
Daniele Ceraolo Spurio [Wed, 7 Feb 2018 21:24:40 +0000 (13:24 -0800)]
drm/i915: do not stop engines on sanitize if i915.reset=0
Since commit
5896a5c8c9c0 (drm/i915: Always stop the rings before a
missing GPU reset) we attempt to stop the engines during gem_sanitize
even if reset=0 and nothing bad happened on the gpu.
The specs says that the STOP_RINGS bit needs to be cleared to resume
normal operation, but for some reason the value of the bit seems to be
changing without us writing to it (maybe rc6 entry/exit?), so normal
operation resumes correctly. However, it still feels incorrect to stop
the engines if there hasn't been any issue so skip the whole reset
call in gem_sanitize if i915.reset=0
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180207212440.13438-1-daniele.ceraolospurio@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Wed, 7 Feb 2018 21:05:44 +0000 (21:05 +0000)]
drm/i915: Only allocate preempt context when required
If we remove some hardcoded assumptions about the preempt context having
a fixed id, reserved from use by normal user contexts, we may only
allocate the i915_gem_context when required. Then the subsequent
decisions on using preemption reduce to having the preempt context
available.
v2: Include an assert that we don't allocate the preempt context twice.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180207210544.26351-3-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Chris Wilson [Wed, 7 Feb 2018 21:05:43 +0000 (21:05 +0000)]
drm/i915: Move the scheduler feature bits into the purview of the engines
Rather than having the high level ioctl interface guess the underlying
implementation details, having the implementation declare what
capabilities it exports. We define an intel_driver_caps, similar to the
intel_device_info, which instead of trying to describe the HW gives
details on what the driver itself supports. This is then populated by
the engine backend for the new scheduler capability field for use
elsewhere.
v2: Use caps.scheduler for validating CONTEXT_PARAM_SET_PRIORITY (Mika)
One less assumption of engine[RCS] \o/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180207210544.26351-2-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Chris Wilson [Wed, 7 Feb 2018 21:05:42 +0000 (21:05 +0000)]
drm/i915/guc: Allow preempt-client to be NULL
In the next patch, we may only conditionally allocate the preempt-client
if there is a global preempt context and so we need to be prepared in
case the preempt-client itself is NULL.
v2: Grep for more preempt_client.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180207210544.26351-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Chris Wilson [Wed, 7 Feb 2018 16:04:28 +0000 (16:04 +0000)]
drm/i915/pmu: Fix building without CONFIG_PM
As we peek inside struct device to query members guarded by CONFIG_PM,
so must be the code.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes:
1fe699e30113 ("drm/i915/pmu: Fix sleep under atomic in RC6 readout")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180207160428.17015-1-chris@chris-wilson.co.uk
Tvrtko Ursulin [Tue, 6 Feb 2018 18:33:11 +0000 (18:33 +0000)]
drm/i915/pmu: Fix sleep under atomic in RC6 readout
We are not allowed to call intel_runtime_pm_get from the PMU counter read
callback since the former can sleep, and the latter is running under IRQ
context.
To workaround this, we record the last known RC6 and while runtime
suspended estimate its increase by querying the runtime PM core
timestamps.
Downside of this approach is that we can temporarily lose a chunk of RC6
time, from the last PMU read-out to runtime suspend entry, but that will
eventually catch up, once device comes back online and in the presence of
PMU queries.
Also, we have to be careful not to overshoot the RC6 estimate, so once
resumed after a period of approximation, we only update the counter once
it catches up. With the observation that RC6 is increasing while the
device is suspended, this should not pose a problem and can only cause
slight inaccuracies due clock base differences.
v2: Simplify by estimating on top of PM core counters. (Imre)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104943
Fixes:
6060b6aec03c ("drm/i915/pmu: Add RC6 residency metrics")
Testcase: igt/perf_pmu/rc6-runtime-pm
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180206183311.17924-1-tvrtko.ursulin@linux.intel.com
Chris Wilson [Wed, 7 Feb 2018 11:15:45 +0000 (11:15 +0000)]
drm/i915: Tidy up some error messages around reset failure
On blb and pnv, we are seeing sporadic
i915 0000:00:02.0: Resetting chip after gpu hang
[drm:intel_gpu_reset [i915]] rcs0: timed out on STOP_RING
[drm:i915_reset [i915]] *ERROR* Failed hw init on reset -5
which notably lack the actual root cause of the error. Ostensibly it
should be the init_ring_common() that failed, but it's error paths are
covered by DRM_ERROR.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180207111545.17078-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 7 Feb 2018 08:43:49 +0000 (08:43 +0000)]
drm/i915: Trim the retired request queue after submitting
If we submit a request and see that the previous request on this
timeline was already signaled, we first do not need to add the
dependency tracker for that completed request and secondly we know that
we there is then a large backlog in retiring requests affecting this
timeline. Given that we just submitted more work to the HW, now would be
a good time to catch up on those retirements.
v2: Try to sum up the compromises involved in flushing the retirement
queue after submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180207084350.3929-1-chris@chris-wilson.co.uk