OSDN Git Service
Aaron Lewis [Wed, 21 Sep 2022 15:15:21 +0000 (15:15 +0000)]
KVM: x86: Disallow the use of KVM_MSR_FILTER_DEFAULT_ALLOW in the kernel
Protect the kernel from using the flag KVM_MSR_FILTER_DEFAULT_ALLOW.
Its value is 0, and using it incorrectly could have unintended
consequences. E.g. prevent someone in the kernel from writing something
like this.
if (filter.flags & KVM_MSR_FILTER_DEFAULT_ALLOW)
<allow the MSR>
and getting confused when it doesn't work.
It would be more ideal to remove this flag altogether, but userspace
may already be using it, so protecting the kernel is all that can
reasonably be done at this point.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220921151525.904162-2-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Xu [Tue, 11 Oct 2022 19:59:47 +0000 (15:59 -0400)]
kvm: x86: Allow to respond to generic signals during slow PF
Enable x86 slow page faults to be able to respond to non-fatal signals,
returning -EINTR properly when it happens.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20221011195947.557281-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Xu [Tue, 11 Oct 2022 19:58:08 +0000 (15:58 -0400)]
kvm: Add interruptible flag to __gfn_to_pfn_memslot()
Add a new "interruptible" flag showing that the caller is willing to be
interrupted by signals during the __gfn_to_pfn_memslot() request. Wire it
up with a FOLL_INTERRUPTIBLE flag that we've just introduced.
This prepares KVM to be able to respond to SIGUSR1 (for QEMU that's the
SIGIPI) even during e.g. handling an userfaultfd page fault.
No functional change intended.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20221011195809.557016-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Xu [Tue, 11 Oct 2022 19:58:07 +0000 (15:58 -0400)]
kvm: Add KVM_PFN_ERR_SIGPENDING
Add a new pfn error to show that we've got a pending signal to handle
during hva_to_pfn_slow() procedure (of -EINTR retval).
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20221011195809.557016-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Xu [Tue, 11 Oct 2022 19:58:06 +0000 (15:58 -0400)]
mm/gup: Add FOLL_INTERRUPTIBLE
We have had FAULT_FLAG_INTERRUPTIBLE but it was never applied to GUPs. One
issue with it is that not all GUP paths are able to handle signal delivers
besides SIGKILL.
That's not ideal for the GUP users who are actually able to handle these
cases, like KVM.
KVM uses GUP extensively on faulting guest pages, during which we've got
existing infrastructures to retry a page fault at a later time. Allowing
the GUP to be interrupted by generic signals can make KVM related threads
to be more responsive. For examples:
(1) SIGUSR1: which QEMU/KVM uses to deliver an inter-process IPI,
e.g. when the admin issues a vm_stop QMP command, SIGUSR1 can be
generated to kick the vcpus out of kernel context immediately,
(2) SIGINT: which can be used with interactive hypervisor users to stop a
virtual machine with Ctrl-C without any delays/hangs,
(3) SIGTRAP: which grants GDB capability even during page faults that are
stuck for a long time.
Normally hypervisor will be able to receive these signals properly, but not
if we're stuck in a GUP for a long time for whatever reason. It happens
easily with a stucked postcopy migration when e.g. a network temp failure
happens, then some vcpu threads can hang death waiting for the pages. With
the new FOLL_INTERRUPTIBLE, we can allow GUP users like KVM to selectively
enable the ability to trap these signals.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <
20221011195809.557016-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Tue, 25 Oct 2022 12:47:41 +0000 (15:47 +0300)]
KVM: x86: smm: preserve interrupt shadow in SMRAM
When #SMI is asserted, the CPU can be in interrupt shadow due to sti or
mov ss.
It is not mandatory in Intel/AMD prm to have the #SMI blocked during the
shadow, and on top of that, since neither SVM nor VMX has true support
for SMI window, waiting for one instruction would mean single stepping
the guest.
Instead, allow #SMI in this case, but both reset the interrupt window and
stash its value in SMRAM to restore it on exit from SMM.
This fixes rare failures seen mostly on windows guests on VMX, when #SMI
falls on the sti instruction which mainfest in VM entry failure due
to EFLAGS.IF not being set, but STI interrupt window still being set
in the VMCS.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20221025124741.228045-24-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Tue, 25 Oct 2022 12:47:40 +0000 (15:47 +0300)]
KVM: x86: SVM: don't save SVM state to SMRAM when VM is not long mode capable
When the guest CPUID doesn't have support for long mode, 32 bit SMRAM
layout is used and it has no support for preserving EFER and/or SVM
state.
Note that this isn't relevant to running 32 bit guests on VM which is
long mode capable - such VM can still run 32 bit guests in compatibility
mode.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20221025124741.228045-23-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Tue, 25 Oct 2022 12:47:39 +0000 (15:47 +0300)]
KVM: x86: SVM: use smram structs
Use SMM structs in the SVM code as well, which removes the last user of
put_smstate/GET_SMSTATE so remove these macros as well.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20221025124741.228045-22-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Tue, 25 Oct 2022 12:47:38 +0000 (15:47 +0300)]
KVM: svm: drop explicit return value of kvm_vcpu_map
if kvm_vcpu_map returns non zero value, error path should be triggered
regardless of the exact returned error value.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20221025124741.228045-21-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Tue, 25 Oct 2022 12:47:37 +0000 (15:47 +0300)]
KVM: x86: smm: use smram struct for 64 bit smram load/restore
Use kvm_smram_state_64 struct to save/restore the 64 bit SMM state
(used when X86_FEATURE_LM is present in the guest CPUID,
regardless of 32-bitness of the guest).
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20221025124741.228045-20-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Tue, 25 Oct 2022 12:47:36 +0000 (15:47 +0300)]
KVM: x86: smm: use smram struct for 32 bit smram load/restore
Use kvm_smram_state_32 struct to save/restore 32 bit SMM state
(used when X86_FEATURE_LM is not present in the guest CPUID).
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20221025124741.228045-19-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Tue, 25 Oct 2022 12:47:35 +0000 (15:47 +0300)]
KVM: x86: smm: use smram structs in the common code
Use kvm_smram union instad of raw arrays in the common smm code.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20221025124741.228045-18-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Tue, 25 Oct 2022 12:47:34 +0000 (15:47 +0300)]
KVM: x86: smm: add structs for KVM's smram layout
Add structs that will be used to define and read/write the KVM's
SMRAM layout, instead of reading/writing to raw offsets.
Also document the differences between KVM's SMRAM layout and SMRAM
layout that is used by real Intel/AMD cpus.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20221025124741.228045-17-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Tue, 25 Oct 2022 12:47:33 +0000 (15:47 +0300)]
KVM: x86: smm: check for failures on smm entry
In the rare case of the failure on SMM entry, the KVM should at
least terminate the VM instead of going south.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20221025124741.228045-16-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 7 Nov 2022 15:11:42 +0000 (10:11 -0500)]
KVM: x86: do not define SMM-related constants if SMM disabled
The hidden processor flags HF_SMM_MASK and HF_SMM_INSIDE_NMI_MASK
are not needed if CONFIG_KVM_SMM is turned off. Remove the
definitions altogether and the code that uses them.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 27 Oct 2022 16:44:28 +0000 (12:44 -0400)]
KVM: zero output of KVM_GET_VCPU_EVENTS before filling in the struct
This allows making some fields optional, as will be the case soon
for SMM-related data.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 29 Sep 2022 17:20:16 +0000 (13:20 -0400)]
KVM: x86: do not define KVM_REQ_SMI if SMM disabled
This ensures that all the relevant code is compiled out, in fact
the process_smi stub can be removed too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20220929172016.319443-9-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 29 Sep 2022 17:20:15 +0000 (13:20 -0400)]
KVM: x86: remove SMRAM address space if SMM is not supported
If CONFIG_KVM_SMM is not defined HF_SMM_MASK will always be zero, and
we can spare userspace the hassle of setting up the SMRAM address space
simply by reporting that only one address space is supported.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20220929172016.319443-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 29 Sep 2022 17:20:14 +0000 (13:20 -0400)]
KVM: x86: compile out vendor-specific code if SMM is disabled
Vendor-specific code that deals with SMI injection and saving/restoring
SMM state is not needed if CONFIG_KVM_SMM is disabled, so remove the
four callbacks smi_allowed, enter_smm, leave_smm and enable_smi_window.
The users in svm/nested.c and x86.c also have to be compiled out; the
amount of #ifdef'ed code is small and it's not worth moving it to
smm.c.
enter_smm is now used only within #ifdef CONFIG_KVM_SMM, and the stub
can therefore be removed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20220929172016.319443-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 29 Sep 2022 17:20:13 +0000 (13:20 -0400)]
KVM: allow compiling out SMM support
Some users of KVM implement the UEFI variable store through a paravirtual device
that does not require the "SMM lockbox" component of edk2; allow them to
compile out system management mode, which is not a full implementation
especially in how it interacts with nested virtualization.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20220929172016.319443-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 29 Sep 2022 17:20:12 +0000 (13:20 -0400)]
KVM: x86: do not go through ctxt->ops when emulating rsm
Now that RSM is implemented in a single emulator callback, there is no
point in going through other callbacks for the sake of modifying
processor state. Just invoke KVM's own internal functions directly,
and remove the callbacks that were only used by em_rsm; the only
substantial difference is in the handling of the segment registers
and descriptor cache, which have to be parsed into a struct kvm_segment
instead of a struct desc_struct.
This also fixes a bug where emulator_set_segment was shifting the
limit left by 12 if the G bit is set, but the limit had not been
shifted right upon entry to SMM.
The emulator context is still used to restore EIP and the general
purpose registers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20220929172016.319443-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 28 Oct 2022 10:01:26 +0000 (06:01 -0400)]
KVM: x86: move SMM exit to a new file
Some users of KVM implement the UEFI variable store through a paravirtual
device that does not require the "SMM lockbox" component of edk2, and
would like to compile out system management mode. In preparation for
that, move the SMM exit code out of emulate.c and into a new file.
The code is still written as a series of invocations of the emulator
callbacks, but the two exiting_smm and leave_smm callbacks are merged
into one, and all the code from em_rsm is now part of the callback.
This removes all knowledge of the format of the SMM save state area
from the emulator. Further patches will clean up the code and
invoke KVM's own functions to access control registers, descriptor
caches, etc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20220929172016.319443-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 29 Sep 2022 17:20:10 +0000 (13:20 -0400)]
KVM: x86: move SMM entry to a new file
Some users of KVM implement the UEFI variable store through a paravirtual
device that does not require the "SMM lockbox" component of edk2, and
would like to compile out system management mode. In preparation for
that, move the SMM entry code out of x86.c and into a new file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20220929172016.319443-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 29 Sep 2022 17:20:09 +0000 (13:20 -0400)]
KVM: x86: start moving SMM-related functions to new files
Create a new header and source with code related to system management
mode emulation. Entry and exit will move there too; for now,
opportunistically rename put_smstate to PUT_SMSTATE while moving
it to smm.h, and adjust the SMM state saving code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20220929172016.319443-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Carlos Bilbao [Mon, 24 Oct 2022 16:44:48 +0000 (11:44 -0500)]
KVM: SVM: Name and check reserved fields with structs offset
Rename reserved fields on all structs in arch/x86/include/asm/svm.h
following their offset within the structs. Include compile time checks for
this in the same place where other BUILD_BUG_ON for the structs are.
This also solves that fields of struct sev_es_save_area are named by their
order of appearance, but right now they jump from reserved_5 to reserved_7.
Link: https://lkml.org/lkml/2022/10/22/376
Signed-off-by: Carlos Bilbao <carlos.bilbao@amd.com>
Message-Id: <
20221024164448.203351-1-carlos.bilbao@amd.com>
[Use ASSERT_STRUCT_OFFSET + fix a couple wrong offsets. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Tue, 25 Oct 2022 12:47:27 +0000 (15:47 +0300)]
bug: introduce ASSERT_STRUCT_OFFSET
ASSERT_STRUCT_OFFSET allows to assert during the build of
the kernel that a field in a struct have an expected offset.
KVM used to have such macro, but there is almost nothing KVM specific
in it so move it to build_bug.h, so that it can be used in other
places in KVM.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20221025124741.228045-10-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rafael Mendonca [Fri, 21 Oct 2022 02:01:13 +0000 (23:01 -0300)]
x86/kvm: Remove unused virt to phys translation in kvm_guest_cpu_init()
Presumably, this was introduced due to a conflict resolution with
commit
ef68017eb570 ("x86/kvm: Handle async page faults directly through
do_page_fault()"), given that the last posted version [1] of the blamed
commit was not based on the aforementioned commit.
[1] https://lore.kernel.org/kvm/
20200525144125.143875-9-vkuznets@redhat.com/
Fixes:
b1d405751cd5 ("KVM: x86: Switch KVM guest to using interrupts for page ready APF delivery")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Message-Id: <
20221021020113.922027-1-rafaelmendsr@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Tue, 30 Aug 2022 22:52:09 +0000 (15:52 -0700)]
KVM: x86: Insert "AMD" in KVM_X86_FEATURE_PSFD
Intel and AMD have separate CPUID bits for each SPEC_CTRL bit. In the
case of every bit other than PFSD, the Intel CPUID bit has no vendor
name qualifier, but the AMD CPUID bit does. For consistency, rename
KVM_X86_FEATURE_PSFD to KVM_X86_FEATURE_AMD_PSFD.
No functional change intended.
Signed-off-by: Jim Mattson <jmattson@google.com>
Cc: Babu Moger <Babu.Moger@amd.com>
Message-Id: <
20220830225210.
2381310-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Miaohe Lin [Tue, 13 Sep 2022 08:54:52 +0000 (16:54 +0800)]
KVM: x86/mmu: use helper macro SPTE_ENT_PER_PAGE
Use helper macro SPTE_ENT_PER_PAGE to get the number of spte entries
per page. Minor readability improvement.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220913085452.25561-1-linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Miaohe Lin [Tue, 13 Sep 2022 09:17:25 +0000 (17:17 +0800)]
KVM: x86/mmu: fix some comment typos
Fix some typos in comments.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220913091725.35953-1-linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Miaohe Lin [Tue, 13 Sep 2022 09:05:37 +0000 (17:05 +0800)]
KVM: x86: remove obsolete kvm_mmu_gva_to_gpa_fetch()
There's no caller. Remove it.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220913090537.25195-1-linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Thu, 6 Oct 2022 00:03:14 +0000 (00:03 +0000)]
KVM: x86: Directly query supported PERF_CAPABILITIES for WRMSR checks
Use kvm_caps.supported_perf_cap directly instead of bouncing through
kvm_get_msr_feature() when checking the incoming value for writes to
PERF_CAPABILITIES.
Note, kvm_get_msr_feature() is guaranteed to succeed when getting
PERF_CAPABILITIES, i.e. dropping that check is a nop.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20221006000314.73240-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Thu, 6 Oct 2022 00:03:13 +0000 (00:03 +0000)]
KVM: x86: Handle PERF_CAPABILITIES in common x86's kvm_get_msr_feature()
Handle PERF_CAPABILITIES directly in kvm_get_msr_feature() now that the
supported value is available in kvm_caps.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20221006000314.73240-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Thu, 6 Oct 2022 00:03:12 +0000 (00:03 +0000)]
KVM: x86: Init vcpu->arch.perf_capabilities in common x86 code
Initialize vcpu->arch.perf_capabilities in x86's kvm_arch_vcpu_create()
instead of deferring initialization to vendor code. For better or worse,
common x86 handles reads and writes to the MSR, and so common x86 should
also handle initializing the MSR.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20221006000314.73240-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Thu, 6 Oct 2022 00:03:11 +0000 (00:03 +0000)]
KVM: x86: Track supported PERF_CAPABILITIES in kvm_caps
Track KVM's supported PERF_CAPABILITIES in kvm_caps instead of computing
the supported capabilities on the fly every time. Using kvm_caps will
also allow for future cleanups as the kvm_caps values can be used
directly in common x86 code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Like Xu <likexu@tencent.com>
Message-Id: <
20221006000314.73240-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Thu, 6 Oct 2022 00:03:07 +0000 (00:03 +0000)]
perf/x86/core: Zero @lbr instead of returning -1 in x86_perf_get_lbr() stub
Drop the return value from x86_perf_get_lbr() and have the stub zero out
the @lbr structure instead of returning -1 to indicate "no LBR support".
KVM doesn't actually check the return value, and instead subtly relies on
zeroing the number of LBRs in intel_pmu_init().
Formalize "nr=0 means unsupported" so that KVM doesn't need to add a
pointless check on the return value to fix KVM's benign bug.
Note, the stub is necessary even though KVM x86 selects PERF_EVENTS and
the caller exists only when CONFIG_KVM_INTEL=y. Despite the name,
KVM_INTEL doesn't strictly require CPU_SUP_INTEL, it can be built with
any of INTEL || CENTAUR || ZHAOXIN CPUs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20221006000314.73240-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 9 Nov 2022 17:28:15 +0000 (12:28 -0500)]
Merge tag 'kvm-s390-master-6.1-1' of https://git./linux/kernel/git/kvms390/linux into HEAD
A PCI allocation fix and a PV clock fix.
Like Xu [Mon, 19 Sep 2022 09:10:08 +0000 (17:10 +0800)]
KVM: x86/pmu: Limit the maximum number of supported AMD GP counters
The AMD PerfMonV2 specification allows for a maximum of 16 GP counters,
but currently only 6 pairs of MSRs are accepted by KVM.
While AMD64_NUM_COUNTERS_CORE is already equal to 6, increasing without
adjusting msrs_to_save_all[] could result in out-of-bounds accesses.
Therefore introduce a macro (named KVM_AMD_PMC_MAX_GENERIC) to
refer to the number of counters supported by KVM.
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <
20220919091008.60695-3-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Like Xu [Mon, 19 Sep 2022 09:10:07 +0000 (17:10 +0800)]
KVM: x86/pmu: Limit the maximum number of supported Intel GP counters
The Intel Architectural IA32_PMCx MSRs addresses range allows for a
maximum of 8 GP counters, and KVM cannot address any more. Introduce a
local macro (named KVM_INTEL_PMC_MAX_GENERIC) and use it consistently to
refer to the number of counters supported by KVM, thus avoiding possible
out-of-bound accesses.
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <
20220919091008.60695-2-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Like Xu [Mon, 19 Sep 2022 09:10:06 +0000 (17:10 +0800)]
KVM: x86/pmu: Do not speculatively query Intel GP PMCs that don't exist yet
The SDM lists an architectural MSR IA32_CORE_CAPABILITIES (0xCF)
that limits the theoretical maximum value of the Intel GP PMC MSRs
allocated at 0xC1 to 14; likewise the Intel April 2022 SDM adds
IA32_OVERCLOCKING_STATUS at 0x195 which limits the number of event
selection MSRs to 15 (0x186-0x194).
Limiting the maximum number of counters to 14 or 18 based on the currently
allocated MSRs is clearly fragile, and it seems likely that Intel will
even place PMCs 8-15 at a completely different range of MSR indices.
So stop at the maximum number of GP PMCs supported today on Intel
processors.
There are some machines, like Intel P4 with non Architectural PMU, that
may indeed have 18 counters, but those counters are in a completely
different MSR address range and are not supported by KVM.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Fixes:
cf05a67b68b8 ("KVM: x86: omit "impossible" pmu MSRs from MSR list")
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <
20220919091008.60695-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Gonda [Fri, 4 Nov 2022 14:22:20 +0000 (07:22 -0700)]
KVM: SVM: Only dump VMSA to klog at KERN_DEBUG level
Explicitly print the VMSA dump at KERN_DEBUG log level, KERN_CONT uses
KERNEL_DEFAULT if the previous log line has a newline, i.e. if there's
nothing to continuing, and as a result the VMSA gets dumped when it
shouldn't.
The KERN_CONT documentation says it defaults back to KERNL_DEFAULT if the
previous log line has a newline. So switch from KERN_CONT to
print_hex_dump_debug().
Jarkko pointed this out in reference to the original patch. See:
https://lore.kernel.org/all/YuPMeWX4uuR1Tz3M@kernel.org/
print_hex_dump(KERN_DEBUG, ...) was pointed out there, but
print_hex_dump_debug() should similar.
Fixes:
6fac42f127b8 ("KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog")
Signed-off-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Harald Hoyer <harald@profian.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Message-Id: <
20221104142220.469452-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rong Tao [Mon, 7 Nov 2022 14:52:49 +0000 (22:52 +0800)]
tools/kvm_stat: update exit reasons for vmx/svm/aarch64/userspace
Update EXIT_REASONS from source, including VMX_EXIT_REASONS,
SVM_EXIT_REASONS, AARCH64_EXIT_REASONS, USERSPACE_EXIT_REASONS.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_00082C8BFA925A65E11570F417F1CD404505@qq.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Matthias Gerstner [Thu, 3 Nov 2022 13:59:27 +0000 (14:59 +0100)]
tools/kvm_stat: fix incorrect detection of debugfs
The first field in /proc/mounts can be influenced by unprivileged users
through the widespread `fusermount` setuid-root program. Example:
```
user$ mkdir ~/mydebugfs
user$ export _FUSE_COMMFD=0
user$ fusermount ~/mydebugfs -ononempty,fsname=debugfs
user$ grep debugfs /proc/mounts
debugfs /home/user/mydebugfs fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0
```
If there is no debugfs already mounted in the system then this can be
used by unprivileged users to trick kvm_stat into using a user
controlled file system location for obtaining KVM statistics.
Even though the root user is not allowed to access non-root FUSE mounts
for security reasons, the unprivileged user can unmount the FUSE mount
before kvm_stat uses the mounted path. If it wins the race, kvm_stat
will read from the location where the FUSE mount resided.
Note that the files in debugfs are only opened for reading, so the
attacker can cause very large data to be read in by kvm_stat, or fake
data to be processed, but there should be no viable way to turn this
into a privilege escalation.
The fix is simply to use the file system type field instead. Whitespace
in the mount path is escaped in /proc/mounts thus no further safety
measures in the parsing should be necessary to make this correct.
Message-Id: <
20221103135927.13656-1-matthias.gerstner@suse.de>
Signed-off-by: Matthias Gerstner <matthias.gerstner@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 30 Sep 2022 18:48:24 +0000 (14:48 -0400)]
x86, KVM: remove unnecessary argument to x86_virt_spec_ctrl and callers
x86_virt_spec_ctrl only deals with the paravirtualized
MSR_IA32_VIRT_SPEC_CTRL now and does not handle MSR_IA32_SPEC_CTRL
anymore; remove the corresponding, unused argument.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 30 Sep 2022 18:24:40 +0000 (14:24 -0400)]
KVM: SVM: move MSR_IA32_SPEC_CTRL save/restore to assembly
Restoration of the host IA32_SPEC_CTRL value is probably too late
with respect to the return thunk training sequence.
With respect to the user/kernel boundary, AMD says, "If software chooses
to toggle STIBP (e.g., set STIBP on kernel entry, and clear it on kernel
exit), software should set STIBP to 1 before executing the return thunk
training sequence." I assume the same requirements apply to the guest/host
boundary. The return thunk training sequence is in vmenter.S, quite close
to the VM-exit. On hosts without V_SPEC_CTRL, however, the host's
IA32_SPEC_CTRL value is not restored until much later.
To avoid this, move the restoration of host SPEC_CTRL to assembly and,
for consistency, move the restoration of the guest SPEC_CTRL as well.
This is not particularly difficult, apart from some care to cover both
32- and 64-bit, and to share code between SEV-ES and normal vmentry.
Cc: stable@vger.kernel.org
Fixes:
a149180fbcf3 ("x86: Add magic AMD return-thunk")
Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 7 Nov 2022 08:49:59 +0000 (03:49 -0500)]
KVM: SVM: restore host save area from assembly
Allow access to the percpu area via the GS segment base, which is
needed in order to access the saved host spec_ctrl value. In linux-next
FILL_RETURN_BUFFER also needs to access percpu data.
For simplicity, the physical address of the save area is added to struct
svm_cpu_data.
Cc: stable@vger.kernel.org
Fixes:
a149180fbcf3 ("x86: Add magic AMD return-thunk")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Analyzed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 7 Nov 2022 10:14:27 +0000 (05:14 -0500)]
KVM: SVM: move guest vmsave/vmload back to assembly
It is error-prone that code after vmexit cannot access percpu data
because GSBASE has not been restored yet. It forces MSR_IA32_SPEC_CTRL
save/restore to happen very late, after the predictor untraining
sequence, and it gets in the way of return stack depth tracking
(a retbleed mitigation that is in linux-next as of 2022-11-09).
As a first step towards fixing that, move the VMCB VMSAVE/VMLOAD to
assembly, essentially undoing commit
fb0c4a4fee5a ("KVM: SVM: move
VMLOAD/VMSAVE to C code", 2021-03-15). The reason for that commit was
that it made it simpler to use a different VMCB for VMLOAD/VMSAVE versus
VMRUN; but that is not a big hassle anymore thanks to the kvm-asm-offsets
machinery and other related cleanups.
The idea on how to number the exception tables is stolen from
a prototype patch by Peter Zijlstra.
Cc: stable@vger.kernel.org
Fixes:
a149180fbcf3 ("x86: Add magic AMD return-thunk")
Link: <https://lore.kernel.org/all/
f571e404-e625-bae1-10e9-
449b2eb4cbd8@citrix.com/>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 9 Nov 2022 14:07:55 +0000 (09:07 -0500)]
KVM: SVM: do not allocate struct svm_cpu_data dynamically
The svm_data percpu variable is a pointer, but it is allocated via
svm_hardware_setup() when KVM is loaded. Unlike hardware_enable()
this means that it is never NULL for the whole lifetime of KVM, and
static allocation does not waste any memory compared to the status quo.
It is also more efficient and more easily handled from assembly code,
so do it and don't look back.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 9 Nov 2022 13:54:20 +0000 (08:54 -0500)]
KVM: SVM: remove dead field from struct svm_cpu_data
The "cpu" field of struct svm_cpu_data has been write-only since commit
4b656b120249 ("KVM: SVM: force new asid on vcpu migration", 2009-08-05).
Remove it.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 9 Nov 2022 09:54:40 +0000 (04:54 -0500)]
KVM: SVM: remove unused field from struct vcpu_svm
The pointer to svm_cpu_data in struct vcpu_svm looks interesting from
the point of view of accessing it after vmexit, when the GSBASE is still
containing the guest value. However, despite existing since the very
first commit of drivers/kvm/svm.c (commit
6aa8b732ca01, "[PATCH] kvm:
userspace interface", 2006-12-10), it was never set to anything.
Ignore the opportunity to fix a 16 year old "bug" and delete it; doing
things the "harder" way makes it possible to remove more old cruft.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 7 Nov 2022 09:17:29 +0000 (04:17 -0500)]
KVM: SVM: retrieve VMCB from assembly
Continue moving accesses to struct vcpu_svm to vmenter.S. Reducing the
number of arguments limits the chance of mistakes due to different
registers used for argument passing in 32- and 64-bit ABIs; pushing the
VMCB argument and almost immediately popping it into a different
register looks pretty weird.
32-bit ABI is not a concern for __svm_sev_es_vcpu_run() which is 64-bit
only; however, it will soon need @svm to save/restore SPEC_CTRL so stay
consistent with __svm_vcpu_run() and let them share the same prototype.
No functional change intended.
Cc: stable@vger.kernel.org
Fixes:
a149180fbcf3 ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 28 Oct 2022 21:30:07 +0000 (17:30 -0400)]
KVM: SVM: adjust register allocation for __svm_vcpu_run()
32-bit ABI uses RAX/RCX/RDX as its argument registers, so they are in
the way of instructions that hardcode their operands such as RDMSR/WRMSR
or VMLOAD/VMRUN/VMSAVE.
In preparation for moving vmload/vmsave to __svm_vcpu_run(), keep
the pointer to the struct vcpu_svm in %rdi. In particular, it is now
possible to load svm->vmcb01.pa in %rax without clobbering the struct
vcpu_svm pointer.
No functional change intended.
Cc: stable@vger.kernel.org
Fixes:
a149180fbcf3 ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 30 Sep 2022 18:14:44 +0000 (14:14 -0400)]
KVM: SVM: replace regs argument of __svm_vcpu_run() with vcpu_svm
Since registers are reachable through vcpu_svm, and we will
need to access more fields of that struct, pass it instead
of the regs[] array.
No functional change intended.
Cc: stable@vger.kernel.org
Fixes:
a149180fbcf3 ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 8 Nov 2022 08:44:53 +0000 (09:44 +0100)]
KVM: x86: use a separate asm-offsets.c file
This already removes an ugly #include "" from asm-offsets.c, but
especially it avoids a future error when trying to define asm-offsets
for KVM's svm/svm.h header.
This would not work for kernel/asm-offsets.c, because svm/svm.h
includes kvm_cache_regs.h which is not in the include path when
compiling asm-offsets.c. The problem is not there if the .c file is
in arch/x86/kvm.
Suggested-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Fixes:
a149180fbcf3 ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rafael Mendonca [Wed, 26 Oct 2022 01:32:33 +0000 (22:32 -0300)]
KVM: s390: pci: Fix allocation size of aift kzdev elements
The 'kzdev' field of struct 'zpci_aift' is an array of pointers to
'kvm_zdev' structs. Allocate the proper size accordingly.
Reported by Coccinelle:
WARNING: Use correct pointer type argument for sizeof
Fixes:
98b1d33dac5f ("KVM: s390: pci: do initial setup for AEN interpretation")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221026013234.960859-1-rafaelmendsr@gmail.com
Message-Id: <
20221026013234.960859-1-rafaelmendsr@gmail.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Nico Boehr [Tue, 11 Oct 2022 16:07:12 +0000 (18:07 +0200)]
KVM: s390: pv: don't allow userspace to set the clock under PV
When running under PV, the guest's TOD clock is under control of the
ultravisor and the hypervisor isn't allowed to change it. Hence, don't
allow userspace to change the guest's TOD clock by returning
-EOPNOTSUPP.
When userspace changes the guest's TOD clock, KVM updates its
kvm.arch.epoch field and, in addition, the epoch field in all state
descriptions of all VCPUs.
But, under PV, the ultravisor will ignore the epoch field in the state
description and simply overwrite it on next SIE exit with the actual
guest epoch. This leads to KVM having an incorrect view of the guest's
TOD clock: it has updated its internal kvm.arch.epoch field, but the
ultravisor ignores the field in the state description.
Whenever a guest is now waiting for a clock comparator, KVM will
incorrectly calculate the time when the guest should wake up, possibly
causing the guest to sleep for much longer than expected.
With this change, kvm_s390_set_tod() will now take the kvm->lock to be
able to call kvm_s390_pv_is_protected(). Since kvm_s390_set_tod_clock()
also takes kvm->lock, use __kvm_s390_set_tod_clock() instead.
The function kvm_s390_set_tod_clock is now unused, hence remove it.
Update the documentation to indicate the TOD clock attr calls can now
return -EOPNOTSUPP.
Fixes:
0f3035047140 ("KVM: s390: protvirt: Do only reset registers that are accessible")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20221011160712.928239-2-nrb@linux.ibm.com
Message-Id: <
20221011160712.928239-2-nrb@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Linus Torvalds [Sun, 6 Nov 2022 23:07:11 +0000 (15:07 -0800)]
Linux 6.1-rc4
Linus Torvalds [Sun, 6 Nov 2022 21:09:52 +0000 (13:09 -0800)]
Merge tag 'cxl-fixes-for-6.1-rc4' of git://git./linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"Several fixes for CXL region creation crashes, leaks and failures.
This is mainly fallout from the original implementation of dynamic CXL
region creation (instantiate new physical memory pools) that arrived
in v6.0-rc1.
Given the theme of "failures in the presence of pass-through decoders"
this also includes new regression test infrastructure for that case.
Summary:
- Fix region creation crash with pass-through decoders
- Fix region creation crash when no decoder allocation fails
- Fix region creation crash when scanning regions to enforce the
increasing physical address order constraint that CXL mandates
- Fix a memory leak for cxl_pmem_region objects, track 1:N instead of
1:1 memory-device-to-region associations.
- Fix a memory leak for cxl_region objects when regions with active
targets are deleted
- Fix assignment of NUMA nodes to CXL regions by CFMWS (CXL Window)
emulated proximity domains.
- Fix region creation failure for switch attached devices downstream
of a single-port host-bridge
- Fix false positive memory leak of cxl_region objects by recycling
recently used region ids rather than freeing them
- Add regression test infrastructure for a pass-through decoder
configuration
- Fix some mailbox payload handling corner cases"
* tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Recycle region ids
cxl/region: Fix 'distance' calculation with passthrough ports
tools/testing/cxl: Add a single-port host-bridge regression config
tools/testing/cxl: Fix some error exits
cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak
cxl/region: Fix cxl_region leak, cleanup targets at region delete
cxl/region: Fix region HPA ordering validation
cxl/pmem: Use size_add() against integer overflow
cxl/region: Fix decoder allocation crash
ACPI: NUMA: Add CXL CFMWS 'nodes' to the possible nodes set
cxl/pmem: Fix failure to account for 8 byte header for writes to the device LSA.
cxl/region: Fix null pointer dereference due to pass through decoder commit
cxl/mbox: Add a check on input payload size
Linus Torvalds [Sun, 6 Nov 2022 20:59:12 +0000 (12:59 -0800)]
Merge tag 'hwmon-for-v6.1-rc4' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix two regressions:
- Commit
54cc3dbfc10d ("hwmon: (pmbus) Add regulator supply into
macro") resulted in regulator undercount when disabling regulators.
Revert it.
- The thermal subsystem rework caused the scmi driver to no longer
register with the thermal subsystem because index values no longer
match. To fix the problem, the scmi driver now directly registers
with the thermal subsystem, no longer through the hwmon core"
* tag 'hwmon-for-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
Revert "hwmon: (pmbus) Add regulator supply into macro"
hwmon: (scmi) Register explicitly with Thermal Framework
Linus Torvalds [Sun, 6 Nov 2022 20:41:32 +0000 (12:41 -0800)]
Merge tag 'perf_urgent_for_v6.1_rc4' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Add Cooper Lake's stepping to the PEBS guest/host events isolation
fixed microcode revisions checking quirk
- Update Icelake and Sapphire Rapids events constraints
- Use the standard energy unit for Sapphire Rapids in RAPL
- Fix the hw_breakpoint test to fail more graciously on !SMP configs
* tag 'perf_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add Cooper Lake stepping to isolation_ucodes[]
perf/x86/intel: Fix pebs event constraints for SPR
perf/x86/intel: Fix pebs event constraints for ICL
perf/x86/rapl: Use standard Energy Unit for SPR Dram RAPL domain
perf/hw_breakpoint: test: Skip the test if dependencies unmet
Linus Torvalds [Sun, 6 Nov 2022 20:36:47 +0000 (12:36 -0800)]
Merge tag 'x86_urgent_for_v6.1_rc4' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add new Intel CPU models
- Enforce that TDX guests are successfully loaded only on TDX hardware
where virtualization exception (#VE) delivery on kernel memory is
disabled because handling those in all possible cases is "essentially
impossible"
- Add the proper include to the syscall wrappers so that BTF can see
the real pt_regs definition and not only the forward declaration
* tag 'x86_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add several Intel server CPU model numbers
x86/tdx: Panic on bad configs that #VE on "private" memory access
x86/tdx: Prepare for using "INFO" call for a second purpose
x86/syscall: Include asm/ptrace.h in syscall_wrapper header
Linus Torvalds [Sun, 6 Nov 2022 20:23:10 +0000 (12:23 -0800)]
Merge tag 'kbuild-fixes-v6.1-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Use POSIX-compatible grep options
- Document git-related tips for reproducible builds
- Fix a typo in the modpost rule
- Suppress SIGPIPE error message from gcc-ar and llvm-ar
- Fix segmentation fault in the menuconfig search
* tag 'kbuild-fixes-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix segmentation fault in menuconfig search
kbuild: fix SIGPIPE error message for AR=gcc-ar and AR=llvm-ar
kbuild: fix typo in modpost
Documentation: kbuild: Add description of git for reproducible builds
kbuild: use POSIX-compatible grep option
Linus Torvalds [Sun, 6 Nov 2022 18:46:59 +0000 (10:46 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the pKVM stage-1 walker erronously using the stage-2 accessor
- Correctly convert vcpu->kvm to a hyp pointer when generating an
exception in a nVHE+MTE configuration
- Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
- Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
- Document the boot requirements for FGT when entering the kernel at
EL1
x86:
- Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
- Make argument order consistent for kvcalloc()
- Userspace API fixes for DEBUGCTL and LBRs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix a typo about the usage of kvcalloc()
KVM: x86: Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
KVM: VMX: Ignore guest CPUID for host userspace writes to DEBUGCTL
KVM: VMX: Fold vmx_supported_debugctl() into vcpu_supported_debugctl()
KVM: VMX: Advertise PMU LBRs if and only if perf supports LBRs
arm64: booting: Document our requirements for fine grained traps with SME
KVM: arm64: Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
KVM: Check KVM_CAP_DIRTY_LOG_{RING, RING_ACQ_REL} prior to enabling them
KVM: arm64: Fix bad dereference on MTE-enabled systems
KVM: arm64: Use correct accessor to parse stage-1 PTEs
Linus Torvalds [Sun, 6 Nov 2022 18:42:29 +0000 (10:42 -0800)]
Merge tag 'for-linus-6.1-rc4-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"One fix for silencing a smatch warning, and a small cleanup patch"
* tag 'for-linus-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: simplify sysenter and syscall setup
x86/xen: silence smatch warning in pmu_msr_chk_emulated()
Linus Torvalds [Sun, 6 Nov 2022 18:30:29 +0000 (10:30 -0800)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a number of bugs, including some regressions, the most serious of
which was one which would cause online resizes to fail with file
systems with metadata checksums enabled.
Also fix a warning caused by the newly added fortify string checker,
plus some bugs that were found using fuzzed file systems"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix fortify warning in fs/ext4/fast_commit.c:1551
ext4: fix wrong return err in ext4_load_and_init_journal()
ext4: fix warning in 'ext4_da_release_space'
ext4: fix BUG_ON() when directory entry has invalid rec_len
ext4: update the backup superblock's at the end of the online resize
Linus Torvalds [Sun, 6 Nov 2022 18:19:39 +0000 (10:19 -0800)]
Merge tag '6.1-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"One symlink handling fix and two fixes foir multichannel issues with
iterating channels, including for oplock breaks when leases are
disabled"
* tag '6.1-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix use-after-free on the link name
cifs: avoid unnecessary iteration of tcp sessions
cifs: always iterate smb sessions using primary channel
Linus Torvalds [Sun, 6 Nov 2022 17:57:38 +0000 (09:57 -0800)]
Merge tag 'trace-v6.1-rc3' of git://git./linux/kernel/git/trace/linux-trace
Pull `lTracing fixes for 6.1-rc3:
- Fixed NULL pointer dereference in the ring buffer wait-waiters code
for machines that have less CPUs than what nr_cpu_ids returns.
The buffer array is of size nr_cpu_ids, but only the online CPUs get
initialized.
- Fixed use after free call in ftrace_shutdown.
- Fix accounting of if a kprobe is enabled
- Fix NULL pointer dereference on error path of fprobe rethook_alloc().
- Fix unregistering of fprobe_kprobe_handler
- Fix memory leak in kprobe test module
* tag 'trace-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd()
tracing/fprobe: Fix to check whether fprobe is registered correctly
fprobe: Check rethook_alloc() return in rethook initialization
kprobe: reverse kp->flags when arm_kprobe failed
ftrace: Fix use-after-free for dynamic ftrace_ops
ring-buffer: Check for NULL cpu_buffer in ring_buffer_wake_waiters()
Paolo Bonzini [Sun, 6 Nov 2022 08:25:59 +0000 (03:25 -0500)]
Merge tag 'kvmarm-fixes-6.1-3' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD
* Fix the pKVM stage-1 walker erronously using the stage-2 accessor
* Correctly convert vcpu->kvm to a hyp pointer when generating
an exception in a nVHE+MTE configuration
* Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
* Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
* Document the boot requirements for FGT when entering the kernel
at EL1
Paolo Bonzini [Sun, 6 Nov 2022 08:22:56 +0000 (03:22 -0500)]
Merge branch 'kvm-master' into HEAD
x86:
* Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
* Make argument order consistent for kvcalloc()
* Userspace API fixes for DEBUGCTL and LBRs
Theodore Ts'o [Sun, 6 Nov 2022 03:42:36 +0000 (23:42 -0400)]
ext4: fix fortify warning in fs/ext4/fast_commit.c:1551
With the new fortify string system, rework the memcpy to avoid this
warning:
memcpy: detected field-spanning write (size 60) of single field "&raw_inode->i_generation" at fs/ext4/fast_commit.c:1551 (size 4)
Cc: stable@kernel.org
Fixes:
54d9469bc515 ("fortify: Add run-time WARN for cross-field memcpy()")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jason Yan [Tue, 25 Oct 2022 04:02:06 +0000 (12:02 +0800)]
ext4: fix wrong return err in ext4_load_and_init_journal()
The return value is wrong in ext4_load_and_init_journal(). The local
variable 'err' need to be initialized before goto out. The original code
in __ext4_fill_super() is fine because it has two return values 'ret'
and 'err' and 'ret' is initialized as -EINVAL. After we factor out
ext4_load_and_init_journal(), this code is broken. So fix it by directly
returning -EINVAL in the error handler path.
Cc: stable@kernel.org
Fixes:
9c1dd22d7422 ("ext4: factor out ext4_load_and_init_journal()")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221025040206.3134773-1-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ye Bin [Tue, 18 Oct 2022 02:27:01 +0000 (10:27 +0800)]
ext4: fix warning in 'ext4_da_release_space'
Syzkaller report issue as follows:
EXT4-fs (loop0): Free/Dirty block details
EXT4-fs (loop0): free_blocks=0
EXT4-fs (loop0): dirty_blocks=0
EXT4-fs (loop0): Block reservation details
EXT4-fs (loop0): i_reserved_data_blocks=0
EXT4-fs warning (device loop0): ext4_da_release_space:1527: ext4_da_release_space: ino 18, to_free 1 with only 0 reserved data blocks
------------[ cut here ]------------
WARNING: CPU: 0 PID: 92 at fs/ext4/inode.c:1528 ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1524
Modules linked in:
CPU: 0 PID: 92 Comm: kworker/u4:4 Not tainted
6.0.0-syzkaller-09423-g493ffd6605b2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Workqueue: writeback wb_workfn (flush-7:0)
RIP: 0010:ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1528
RSP: 0018:
ffffc900015f6c90 EFLAGS:
00010296
RAX:
42215896cd52ea00 RBX:
0000000000000000 RCX:
42215896cd52ea00
RDX:
0000000000000000 RSI:
0000000080000001 RDI:
0000000000000000
RBP:
1ffff1100e907d96 R08:
ffffffff816aa79d R09:
fffff520002bece5
R10:
fffff520002bece5 R11:
1ffff920002bece4 R12:
ffff888021fd2000
R13:
ffff88807483ecb0 R14:
0000000000000001 R15:
ffff88807483e740
FS:
0000000000000000(0000) GS:
ffff8880b9a00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00005555569ba628 CR3:
000000000c88e000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
ext4_es_remove_extent+0x1ab/0x260 fs/ext4/extents_status.c:1461
mpage_release_unused_pages+0x24d/0xef0 fs/ext4/inode.c:1589
ext4_writepages+0x12eb/0x3be0 fs/ext4/inode.c:2852
do_writepages+0x3c3/0x680 mm/page-writeback.c:2469
__writeback_single_inode+0xd1/0x670 fs/fs-writeback.c:1587
writeback_sb_inodes+0xb3b/0x18f0 fs/fs-writeback.c:1870
wb_writeback+0x41f/0x7b0 fs/fs-writeback.c:2044
wb_do_writeback fs/fs-writeback.c:2187 [inline]
wb_workfn+0x3cb/0xef0 fs/fs-writeback.c:2227
process_one_work+0x877/0xdb0 kernel/workqueue.c:2289
worker_thread+0xb14/0x1330 kernel/workqueue.c:2436
kthread+0x266/0x300 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
Above issue may happens as follows:
ext4_da_write_begin
ext4_create_inline_data
ext4_clear_inode_flag(inode, EXT4_INODE_EXTENTS);
ext4_set_inode_flag(inode, EXT4_INODE_INLINE_DATA);
__ext4_ioctl
ext4_ext_migrate -> will lead to eh->eh_entries not zero, and set extent flag
ext4_da_write_begin
ext4_da_convert_inline_data_to_extent
ext4_da_write_inline_data_begin
ext4_da_map_blocks
ext4_insert_delayed_block
if (!ext4_es_scan_clu(inode, &ext4_es_is_delonly, lblk))
if (!ext4_es_scan_clu(inode, &ext4_es_is_mapped, lblk))
ext4_clu_mapped(inode, EXT4_B2C(sbi, lblk)); -> will return 1
allocated = true;
ext4_es_insert_delayed_block(inode, lblk, allocated);
ext4_writepages
mpage_map_and_submit_extent(handle, &mpd, &give_up_on_write); -> return -ENOSPC
mpage_release_unused_pages(&mpd, give_up_on_write); -> give_up_on_write == 1
ext4_es_remove_extent
ext4_da_release_space(inode, reserved);
if (unlikely(to_free > ei->i_reserved_data_blocks))
-> to_free == 1 but ei->i_reserved_data_blocks == 0
-> then trigger warning as above
To solve above issue, forbid inode do migrate which has inline data.
Cc: stable@kernel.org
Reported-by: syzbot+c740bb18df70ad00952e@syzkaller.appspotmail.com
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221018022701.683489-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Luís Henriques [Wed, 12 Oct 2022 13:13:30 +0000 (14:13 +0100)]
ext4: fix BUG_ON() when directory entry has invalid rec_len
The rec_len field in the directory entry has to be a multiple of 4. A
corrupted filesystem image can be used to hit a BUG() in
ext4_rec_len_to_disk(), called from make_indexed_dir().
------------[ cut here ]------------
kernel BUG at fs/ext4/ext4.h:2413!
...
RIP: 0010:make_indexed_dir+0x53f/0x5f0
...
Call Trace:
<TASK>
? add_dirent_to_buf+0x1b2/0x200
ext4_add_entry+0x36e/0x480
ext4_add_nondir+0x2b/0xc0
ext4_create+0x163/0x200
path_openat+0x635/0xe90
do_filp_open+0xb4/0x160
? __create_object.isra.0+0x1de/0x3b0
? _raw_spin_unlock+0x12/0x30
do_sys_openat2+0x91/0x150
__x64_sys_open+0x6c/0xa0
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The fix simply adds a call to ext4_check_dir_entry() to validate the
directory entry, returning -EFSCORRUPTED if the entry is invalid.
CC: stable@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216540
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Link: https://lore.kernel.org/r/20221012131330.32456-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Linus Torvalds [Sat, 5 Nov 2022 19:10:25 +0000 (12:10 -0700)]
Merge tag 'acpi-6.1-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Add StorageD3Enable quirk for Dell Inspiron 16 5625 (Mario
Limonciello)"
* tag 'acpi-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: Add another system to quirk list for forcing StorageD3Enable
Rafael J. Wysocki [Sat, 5 Nov 2022 19:01:25 +0000 (20:01 +0100)]
Merge branch 'acpi-x86'
* acpi-x86:
ACPI: x86: Add another system to quirk list for forcing StorageD3Enable
Linus Torvalds [Sat, 5 Nov 2022 16:02:28 +0000 (09:02 -0700)]
Merge tag 'block-6.1-2022-11-05' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fixes for the ublk driver (Ming)
- Fixes for error handling memory leaks (Chen Jun, Chen Zhongjin)
- Explicitly clear the last request in a chain when the plug is
flushed, as it may have already been issued (Al)
* tag 'block-6.1-2022-11-05' of git://git.kernel.dk/linux:
block: blk_add_rq_to_plug(): clear stale 'last' after flush
blk-mq: Fix kmemleak in blk_mq_init_allocated_queue
block: Fix possible memory leak for rq_wb on add_disk failure
ublk_drv: add ublk_queue_cmd() for cleanup
ublk_drv: avoid to touch io_uring cmd in blk_mq io path
ublk_drv: comment on ublk_driver entry of Kconfig
ublk_drv: return flag of UBLK_F_URING_CMD_COMP_IN_TASK in case of module
ChenXiaoSong [Fri, 4 Nov 2022 07:44:41 +0000 (15:44 +0800)]
cifs: fix use-after-free on the link name
xfstests generic/011 reported use-after-free bug as follows:
BUG: KASAN: use-after-free in __d_alloc+0x269/0x859
Read of size 15 at addr
ffff8880078933a0 by task dirstress/952
CPU: 1 PID: 952 Comm: dirstress Not tainted 6.1.0-rc3+ #77
Call Trace:
__dump_stack+0x23/0x29
dump_stack_lvl+0x51/0x73
print_address_description+0x67/0x27f
print_report+0x3e/0x5c
kasan_report+0x7b/0xa8
kasan_check_range+0x1b2/0x1c1
memcpy+0x22/0x5d
__d_alloc+0x269/0x859
d_alloc+0x45/0x20c
d_alloc_parallel+0xb2/0x8b2
lookup_open+0x3b8/0x9f9
open_last_lookups+0x63d/0xc26
path_openat+0x11a/0x261
do_filp_open+0xcc/0x168
do_sys_openat2+0x13b/0x3f7
do_sys_open+0x10f/0x146
__se_sys_creat+0x27/0x2e
__x64_sys_creat+0x55/0x6a
do_syscall_64+0x40/0x96
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Allocated by task 952:
kasan_save_stack+0x1f/0x42
kasan_set_track+0x21/0x2a
kasan_save_alloc_info+0x17/0x1d
__kasan_kmalloc+0x7e/0x87
__kmalloc_node_track_caller+0x59/0x155
kstrndup+0x60/0xe6
parse_mf_symlink+0x215/0x30b
check_mf_symlink+0x260/0x36a
cifs_get_inode_info+0x14e1/0x1690
cifs_revalidate_dentry_attr+0x70d/0x964
cifs_revalidate_dentry+0x36/0x62
cifs_d_revalidate+0x162/0x446
lookup_open+0x36f/0x9f9
open_last_lookups+0x63d/0xc26
path_openat+0x11a/0x261
do_filp_open+0xcc/0x168
do_sys_openat2+0x13b/0x3f7
do_sys_open+0x10f/0x146
__se_sys_creat+0x27/0x2e
__x64_sys_creat+0x55/0x6a
do_syscall_64+0x40/0x96
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 950:
kasan_save_stack+0x1f/0x42
kasan_set_track+0x21/0x2a
kasan_save_free_info+0x1c/0x34
____kasan_slab_free+0x1c1/0x1d5
__kasan_slab_free+0xe/0x13
__kmem_cache_free+0x29a/0x387
kfree+0xd3/0x10e
cifs_fattr_to_inode+0xb6a/0xc8c
cifs_get_inode_info+0x3cb/0x1690
cifs_revalidate_dentry_attr+0x70d/0x964
cifs_revalidate_dentry+0x36/0x62
cifs_d_revalidate+0x162/0x446
lookup_open+0x36f/0x9f9
open_last_lookups+0x63d/0xc26
path_openat+0x11a/0x261
do_filp_open+0xcc/0x168
do_sys_openat2+0x13b/0x3f7
do_sys_open+0x10f/0x146
__se_sys_creat+0x27/0x2e
__x64_sys_creat+0x55/0x6a
do_syscall_64+0x40/0x96
entry_SYSCALL_64_after_hwframe+0x63/0xcd
When opened a symlink, link name is from 'inode->i_link', but it may be
reset to a new value when revalidate the dentry. If some processes get the
link name on the race scenario, then UAF will happen on link name.
Fix this by implementing 'get_link' interface to duplicate the link name.
Fixes:
76894f3e2f71 ("cifs: improve symlink handling for smb2+")
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Fri, 28 Oct 2022 10:01:45 +0000 (10:01 +0000)]
cifs: avoid unnecessary iteration of tcp sessions
In a few places, we do unnecessary iterations of
tcp sessions, even when the server struct is provided.
The change avoids it and uses the server struct provided.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Fri, 28 Oct 2022 09:52:26 +0000 (09:52 +0000)]
cifs: always iterate smb sessions using primary channel
smb sessions and tcons currently hang off primary channel only.
Secondary channels have the lists as empty. Whenever there's a
need to iterate sessions or tcons, we should use the list in the
corresponding primary channel.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Sat, 5 Nov 2022 02:52:24 +0000 (19:52 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Avoid kprobe recursion when cortex_a76_erratum_1463225_debug_handler()
is not inlined (change to __always_inline).
- Fix the visibility of compat hwcaps, broken by recent changes to
consolidate the visibility of hwcaps and the user-space view of the
ID registers.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: cpufeature: Fix the visibility of compat hwcaps
arm64: entry: avoid kprobe recursion
Linus Torvalds [Sat, 5 Nov 2022 02:42:25 +0000 (19:42 -0700)]
Merge tag 'i2c-for-6.1-rc4' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A documentation fix and driver fixes for piix4, tegra, and i801"
* tag 'i2c-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Documentation: devres: add missing I2C helper
i2c: i801: add lis3lv02d's I2C address for Vostro 5568
i2c: tegra: Allocate DMA memory for DMA engine
i2c: piix4: Fix adapter not be removed in piix4_remove()
Guenter Roeck [Fri, 4 Nov 2022 23:37:30 +0000 (16:37 -0700)]
Revert "hwmon: (pmbus) Add regulator supply into macro"
This reverts commit
54cc3dbfc10dc3db7cb1cf49aee4477a8398fbde.
Zev Weiss reports that the reverted patch may cause a regulator
undercount. Here is his report:
... having regulator-dummy set as a supply on my PMBus regulators
(instead of having them as their own top-level regulators without
an upstream supply) leads to enable-count underflow errors when
disabling them:
# echo 0 > /sys/bus/platform/devices/efuse01/state
[ 906.094477] regulator-dummy: Underflow of regulator enable count
[ 906.100563] Failed to disable vout: -EINVAL
[ 136.992676] reg-userspace-consumer efuse01: Failed to configure state: -22
Zev reports that reverting the patch fixes the problem. So let's do that
for now.
Fixes:
54cc3dbfc10d ("hwmon: (pmbus) Add regulator supply into macro")
Cc: Marcello Sylvester Bauer <sylv@sylv.io>
Reported-by: Zev Weiss <zev@bewilderbeest.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cristian Marussi [Mon, 31 Oct 2022 11:40:18 +0000 (11:40 +0000)]
hwmon: (scmi) Register explicitly with Thermal Framework
Available sensors are enumerated and reported by the SCMI platform server
using a 16bit identification number; not all such sensors are of a type
supported by hwmon subsystem and, among the supported ones, only a subset
could be temperature sensors that have to be registered with the Thermal
Framework.
Potential clashes between hwmon channels indexes and the underlying real
sensors IDs do not play well with the hwmon<-->thermal bridge automatic
registration routines and could need a sensible number of fake dummy
sensors to be made up in order to keep indexes and IDs in sync.
Avoid to use the hwmon<-->thermal bridge dropping the HWMON_C_REGISTER_TZ
attribute and instead explicit register temperature sensors directly with
the Thermal Framework.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20221031114018.59048-1-cristian.marussi@arm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Dan Williams [Fri, 4 Nov 2022 00:31:00 +0000 (17:31 -0700)]
cxl/region: Recycle region ids
At region creation time the next region-id is atomically cached so that
there is predictability of region device names. If that region is
destroyed and then a new one is created the region id increments. That
ends up looking like a memory leak, or is otherwise surprising that
identifiers roll forward even after destroying all previously created
regions.
Try to reuse rather than free old region ids at region release time.
While this fixes a cosmetic issue, the needlessly advancing memory
region-id gives the appearance of a memory leak, hence the "Fixes" tag,
but no "Cc: stable" tag.
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes:
779dd20cfb56 ("cxl/region: Add region creation support")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752186062.947915.13200195701224993317.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 4 Nov 2022 00:30:54 +0000 (17:30 -0700)]
cxl/region: Fix 'distance' calculation with passthrough ports
When programming port decode targets, the algorithm wants to ensure that
two devices are compatible to be programmed as peers beneath a given
port. A compatible peer is a target that shares the same dport, and
where that target's interleave position also routes it to the same
dport. Compatibility is determined by the device's interleave position
being >= to distance. For example, if a given dport can only map every
Nth position then positions less than N away from the last target
programmed are incompatible.
The @distance for the host-bridge's cxl_port in a simple dual-ported
host-bridge configuration with 2 direct-attached devices is 1, i.e. An
x2 region divided by 2 dports to reach 2 region targets.
An x4 region under an x2 host-bridge would need 2 intervening switches
where the @distance at the host bridge level is 2 (x4 region divided by
2 switches to reach 4 devices).
However, the distance between peers underneath a single ported
host-bridge is always zero because there is no limit to the number of
devices that can be mapped. In other words, there are no decoders to
program in a passthrough, all descendants are mapped and distance only
starts matters for the intervening descendant ports of the passthrough
port.
Add tracking for the number of dports mapped to a port, and use that to
detect the passthrough case for calculating @distance.
Cc: <stable@vger.kernel.org>
Reported-by: Bobo WL <lmw.bobo@gmail.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: http://lore.kernel.org/r/20221010172057.00001559@huawei.com
Fixes:
27b3f8d13830 ("cxl/region: Program target lists")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752185440.947915.6617495912508299445.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 4 Nov 2022 00:30:48 +0000 (17:30 -0700)]
tools/testing/cxl: Add a single-port host-bridge regression config
Jonathan reports that region creation fails when a single-port
host-bridge connects to a multi-port switch. Mock up that configuration
so a fix can be tested and regression tested going forward.
Reported-by: Bobo WL <lmw.bobo@gmail.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: http://lore.kernel.org/r/20221010172057.00001559@huawei.com
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752184838.947915.2167957540894293891.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 4 Nov 2022 00:30:42 +0000 (17:30 -0700)]
tools/testing/cxl: Fix some error exits
Fix a few typos where 'goto err_port' was used rather than the object
specific cleanup.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752184255.947915.16163477849330181425.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 4 Nov 2022 00:30:36 +0000 (17:30 -0700)]
cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak
When a cxl_nvdimm object goes through a ->remove() event (device
physically removed, nvdimm-bridge disabled, or nvdimm device disabled),
then any associated regions must also be disabled. As highlighted by the
cxl-create-region.sh test [1], a single device may host multiple
regions, but the driver was only tracking one region at a time. This
leads to a situation where only the last enabled region per nvdimm
device is cleaned up properly. Other regions are leaked, and this also
causes cxl_memdev reference leaks.
Fix the tracking by allowing cxl_nvdimm objects to track multiple region
associations.
Cc: <stable@vger.kernel.org>
Link: https://github.com/pmem/ndctl/blob/main/test/cxl-create-region.sh
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Fixes:
04ad63f086d1 ("cxl/region: Introduce cxl_pmem_region objects")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752183647.947915.2045230911503793901.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 4 Nov 2022 00:30:30 +0000 (17:30 -0700)]
cxl/region: Fix cxl_region leak, cleanup targets at region delete
When a region is deleted any targets that have been previously assigned
to that region hold references to it. Trigger those references to
drop by detaching all targets at unregister_region() time.
Otherwise that region object will leak as userspace has lost the ability
to detach targets once region sysfs is torn down.
Cc: <stable@vger.kernel.org>
Fixes:
b9686e8c8e39 ("cxl/region: Enable the assignment of endpoint decoders to regions")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752183055.947915.17681995648556534844.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 4 Nov 2022 00:30:24 +0000 (17:30 -0700)]
cxl/region: Fix region HPA ordering validation
Some regions may not have any address space allocated. Skip them when
validating HPA order otherwise a crash like the following may result:
devm_cxl_add_region: cxl_acpi cxl_acpi.0: decoder3.4: created region9
BUG: kernel NULL pointer dereference, address:
0000000000000000
[..]
RIP: 0010:store_targetN+0x655/0x1740 [cxl_core]
[..]
Call Trace:
<TASK>
kernfs_fop_write_iter+0x144/0x200
vfs_write+0x24a/0x4d0
ksys_write+0x69/0xf0
do_syscall_64+0x3a/0x90
store_targetN+0x655/0x1740:
alloc_region_ref at drivers/cxl/core/region.c:676
(inlined by) cxl_port_attach_region at drivers/cxl/core/region.c:850
(inlined by) cxl_region_attach at drivers/cxl/core/region.c:1290
(inlined by) attach_target at drivers/cxl/core/region.c:1410
(inlined by) store_targetN at drivers/cxl/core/region.c:1453
Cc: <stable@vger.kernel.org>
Fixes:
384e624bb211 ("cxl/region: Attach endpoint decoders")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166752182461.947915.497032805239915067.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Linus Torvalds [Fri, 4 Nov 2022 22:05:42 +0000 (15:05 -0700)]
Merge tag 'xfs-6.1-fixes-4' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Dave and I had thought that this would be a very quiet cycle, but we
thought wrong.
At first there were the usual trickle of minor bugfixes, but then
Zorro pulled -rc1 and noticed complaints about the stronger memcpy
checks w.r.t. flex arrays.
Analyzing how to fix that revealed a bunch of validation gaps in
validating ondisk log items during recovery, and then a customer hit
an infinite loop in the refcounting code on a corrupt filesystem.
So. This largeish batch of fixes addresses all those problems, I hope.
Summary:
- Fix a UAF bug during log recovery
- Fix memory leaks when mount fails
- Detect corrupt bestfree information in a directory block
- Fix incorrect return value type for the dax page fault handlers
- Fix fortify complaints about memcpy of xfs log item objects
- Strengthen inadequate validation of recovered log items
- Fix incorrectly declared flex array in EFI log item structs
- Log corrupt log items for debugging purposes
- Fix infinite loop problems in the refcount code if the refcount
btree node block keys are corrupt
- Fix infinite loop problems in the refcount code if the refcount
btree records suffer MSB bitflips
- Add more sanity checking to continued defer ops to prevent
overflows from one AG to the next or off EOFS"
* tag 'xfs-6.1-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits)
xfs: rename XFS_REFC_COW_START to _COWFLAG
xfs: fix uninitialized list head in struct xfs_refcount_recovery
xfs: fix agblocks check in the cow leftover recovery function
xfs: check record domain when accessing refcount records
xfs: remove XFS_FIND_RCEXT_SHARED and _COW
xfs: refactor domain and refcount checking
xfs: report refcount domain in tracepoints
xfs: track cow/shared record domains explicitly in xfs_refcount_irec
xfs: refactor refcount record usage in xchk_refcountbt_rec
xfs: dump corrupt recovered log intent items to dmesg consistently
xfs: move _irec structs to xfs_types.h
xfs: actually abort log recovery on corrupt intent-done log items
xfs: check deferred refcount op continuation parameters
xfs: refactor all the EFI/EFD log item sizeof logic
xfs: create a predicate to verify per-AG extents
xfs: fix memcpy fortify errors in EFI log format copying
xfs: make sure aglen never goes negative in xfs_refcount_adjust_extents
xfs: fix memcpy fortify errors in RUI log format copying
xfs: fix memcpy fortify errors in CUI log format copying
xfs: fix memcpy fortify errors in BUI log format copying
...
Linus Torvalds [Fri, 4 Nov 2022 21:55:47 +0000 (14:55 -0700)]
Merge tag 'landlock-6.1-rc4' of git://git./linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"Fix the test build for some distros"
* tag 'landlock-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Build without static libraries
Linus Torvalds [Fri, 4 Nov 2022 21:46:45 +0000 (14:46 -0700)]
Merge tag 'hardening-v6.1-rc4' of git://git./linux/kernel/git/kees/linux
Pull hardening fix from Kees Cook:
- Correctly report struct member size on memcpy overflow (Kees Cook)
* tag 'hardening-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fortify: Capture __bos() results in const temp vars
Linus Torvalds [Fri, 4 Nov 2022 21:37:25 +0000 (14:37 -0700)]
Merge tag 'efi-fixes-for-v6.1-2' of git://git./linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- A pair of tweaks to the EFI random seed code so that externally
provided version of this config table are handled more robustly
- Another fix for the v6.0 EFI variable refactor that turned out to
break Apple machines which don't provide QueryVariableInfo()
- Add some guard rails to the EFI runtime service call wrapper so we
can recover from synchronous exceptions caused by firmware
* tag 'efi-fixes-for-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Recover from synchronous exceptions occurring in firmware
efi: efivars: Fix variable writes with unsupported query_variable_store()
efi: random: Use 'ACPI reclaim' memory for random seed
efi: random: reduce seed size to 32 bytes
efi/tpm: Pass correct address to memblock_reserve
Linus Torvalds [Fri, 4 Nov 2022 21:13:12 +0000 (14:13 -0700)]
Merge tag 'soc-fixes-6.1-2' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are not a lot of important fixes for the soc tree yet this time,
but it's time to upstream what I got so far:
- DT Fixes for Arm Juno and ST-Ericsson Ux500 to add missing critical
temperature points
- A number of fixes for the Arm SCMI firmware, addressing correctness
issues in the code, in particular error handling and resource
leaks.
- One error handling fix for the new i.MX93 power domain driver
- Several devicetree fixes for NXP i.MX6/8/9 and Layerscape chips,
fixing incorrect or missing DT properties for MDIO controller
nodes, CPLD, USB and regulators for various boards, as well as some
fixes for DT schema checks.
- MAINTAINERS file updates for HiSilicon LPC Bus and Broadcom git
URLs"
* tag 'soc-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
arm64: dts: juno: Add thermal critical trip points
firmware: arm_scmi: Fix deferred_tx_wq release on error paths
firmware: arm_scmi: Fix devres allocation device in virtio transport
firmware: arm_scmi: Make Rx chan_setup fail on memory errors
firmware: arm_scmi: Make tx_prepare time out eventually
firmware: arm_scmi: Suppress the driver's bind attributes
firmware: arm_scmi: Cleanup the core driver removal callback
MAINTAINERS: Update HiSilicon LPC BUS Driver maintainer
ARM: dts: ux500: Add trips to battery thermal zones
arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers
arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers
arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers
soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe()
arm64: dts: imx93: correct gpio-ranges
arm64: dts: imx93: correct s4mu interrupt names
dt-bindings: power: gpcv2: add power-domains property
arm64: dts: imx8: correct clock order
ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset
arm64: dts: imx8mn: Correct the usb power domain
...
Tony Luck [Thu, 3 Nov 2022 20:33:10 +0000 (13:33 -0700)]
x86/cpu: Add several Intel server CPU model numbers
These servers are all on the public versions of the roadmap. The model
numbers for Grand Ridge, Granite Rapids, and Sierra Forest were included
in the September 2022 edition of the Instruction Set Extensions document.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20221103203310.5058-1-tony.luck@intel.com
Linus Torvalds [Fri, 4 Nov 2022 18:31:41 +0000 (11:31 -0700)]
Merge tag 'drm-fixes-2022-11-04-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is the weekly fixes for rc4. Misc fixes across rockchip, imx,
amdgpu and i915.
The biggest change is for amdkfd where the trap handler needs an
updated fw from a header which makes it a bit larger. I hadn't noticed
this particular file before so I'm going to figure out what the magic
is for, but the fix should be fine for now.
amdgpu:
- DCN 3.1.4 fixes
- DCN 3.2.x fixes
- GC 11.x fixes
- Virtual display fix
- Fail suspend if resources can't be evicted
- SR-IOV fix
- Display PSR fix
amdkfd:
- Fix possible NULL pointer deref
- GC 11.x trap handler fix
i915:
- Add locking around DKL PHY register accesses
- Stop abusing swiotlb_max_segment
- Filter out invalid outputs more sensibly
- Setup DDC fully before output init
- Simplify intel_panel_add_edid_alt_fixed_modes()
- Grab mode_config.mutex during LVDS init to avoid WARNs
rockchip:
- fix probing issues
- fix framebuffer without iommu
- fix vop selection
- fix NULL ptr access
imx:
- Fix Kconfig
- fix mode_valid function"
* tag 'drm-fixes-2022-11-04-1' of git://anongit.freedesktop.org/drm/drm: (35 commits)
drm/amdkfd: update GFX11 CWSR trap handler
drm/amd/display: Investigate tool reported FCLK P-state deviations
drm/amd/display: Add DSC delay factor workaround
drm/amd/display: Round up DST_after_scaler to nearest int
drm/amd/display: Use forced DSC bpp in DML
drm/amd/display: Fix DCN32 DSC delay calculation
drm/amdgpu: Disable GPU reset on SRIOV before remove pci.
drm/amdgpu: disable GFXOFF during compute for GFX11
drm/amd: Fail the suspend if resources can't be evicted
drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()
drm/amdgpu: correct MES debugfs versions
drm/amdgpu: set fb_modifiers_not_supported in vkms
drm/amd/display: cursor update command incomplete
drm/amd/display: Enable timing sync on DCN32
drm/amd/display: Set memclk levels to be at least 1 for dcn32
drm/amd/display: Update latencies on DCN321
drm/amd/display: Limit dcn32 to 1950Mhz display clock
drm/amd/display: Ignore Cable ID Feature
drm/amd/display: Update DSC capabilitie for DCN314
drm/imx: imx-tve: Fix return type of imx_tve_connector_mode_valid
...
Linus Torvalds [Fri, 4 Nov 2022 18:22:44 +0000 (11:22 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Fixes in clk drivers and some clk rate range fixes in the core as
well:
- Make sure the struct clk_rate_request is more sane
- Remove a WARN_ON that was triggering for clks with no parents that
can change frequency
- Fix bad i2c bus transactions on Renesas rs9
- Actually return an error in clk_mt8195_topck_probe() on an error
path
- Keep the GPU memories powered while the clk isn't enabled on
Qualcomm's sc7280 SoC
- Fix the parent clk for HSCIF modules on Renesas' R-Car V4H SoC"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: Update the force mem core bit for GPU clocks
clk: Initialize max_rate in struct clk_rate_request
clk: Initialize the clk_rate_request even if clk_core is NULL
clk: Remove WARN_ON NULL parent in clk_core_init_rate_req()
clk: renesas: r8a779g0: Fix HSCIF parent clocks
clk: renesas: r8a779g0: Add SASYNCPER clocks
clk: mediatek: clk-mt8195-topckgen: Fix error return code in clk_mt8195_topck_probe()
clk: sifive: select by default if SOC_SIFIVE
clk: rs9: Fix I2C accessors
Shang XiaoJing [Wed, 2 Nov 2022 07:29:54 +0000 (15:29 +0800)]
tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd()
test_gen_kprobe_cmd() only free buf in fail path, hence buf will leak
when there is no failure. Move kfree(buf) from fail path to common path
to prevent the memleak. The same reason and solution in
test_gen_kretprobe_cmd().
unreferenced object 0xffff888143b14000 (size 2048):
comm "insmod", pid 52490, jiffies
4301890980 (age 40.553s)
hex dump (first 32 bytes):
70 3a 6b 70 72 6f 62 65 73 2f 67 65 6e 5f 6b 70 p:kprobes/gen_kp
72 6f 62 65 5f 74 65 73 74 20 64 6f 5f 73 79 73 robe_test do_sys
backtrace:
[<
000000006d7b836b>] kmalloc_trace+0x27/0xa0
[<
0000000009528b5b>] 0xffffffffa059006f
[<
000000008408b580>] do_one_initcall+0x87/0x2a0
[<
00000000c4980a7e>] do_init_module+0xdf/0x320
[<
00000000d775aad0>] load_module+0x3006/0x3390
[<
00000000e9a74b80>] __do_sys_finit_module+0x113/0x1b0
[<
000000003726480d>] do_syscall_64+0x35/0x80
[<
000000003441e93b>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Link: https://lore.kernel.org/all/20221102072954.26555-1-shangxiaojing@huawei.com/
Fixes:
64836248dda2 ("tracing: Add kprobe event command generation test module")
Cc: stable@vger.kernel.org
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Masami Hiramatsu (Google) [Sun, 23 Oct 2022 02:11:43 +0000 (11:11 +0900)]
tracing/fprobe: Fix to check whether fprobe is registered correctly
Since commit
ab51e15d535e ("fprobe: Introduce FPROBE_FL_KPROBE_SHARED flag
for fprobe") introduced fprobe_kprobe_handler() for fprobe::ops::func,
unregister_fprobe() fails to unregister the registered if user specifies
FPROBE_FL_KPROBE_SHARED flag.
Moreover, __register_ftrace_function() is possible to change the
ftrace_ops::func, thus we have to check fprobe::ops::saved_func instead.
To check it correctly, it should confirm the fprobe::ops::saved_func is
either fprobe_handler() or fprobe_kprobe_handler().
Link: https://lore.kernel.org/all/166677683946.1459107.15997653945538644683.stgit@devnote3/
Fixes:
cad9931f64dc ("fprobe: Add ftrace based probe APIs")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>