OSDN Git Service
Pali Rohár [Mon, 20 Feb 2023 08:04:35 +0000 (09:04 +0100)]
powerpc: dts: turris1x.dts: Set lower priority for CPLD syscon-reboot
Due to CPLD firmware bugs, set CPLD syscon-reboot priority level to 64
(between rstcr and watchdog) to ensure that rstcr's global-utilities reset
method which is preferred stay as default one, and to ensure that CPLD
syscon-reboot is more preferred than watchdog reset method.
Fixes:
0531a4abd1c6 ("powerpc: dts: turris1x.dts: Add CPLD reboot node")
Depends-on:
e6333293f27c ("power: reset: syscon-reboot: Add support for specifying priority")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230220080435.4237-1-pali@kernel.org
Christophe Leroy [Sat, 18 Feb 2023 09:28:50 +0000 (10:28 +0100)]
powerpc/e500: Add missing prototype for 'relocate_init'
Kernel test robot reports:
arch/powerpc/mm/nohash/e500.c:314:21: warning: no previous prototype for 'relocate_init' [-Wmissing-prototypes]
314 | notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start)
| ^~~~~~~~~~~~~
Add it in mm/mmu_decl.h, close to associated is_second_reloc
variable declaration.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/oe-kbuild-all/202302181136.wgyCKUcs-lkp@intel.com/
Link: https://lore.kernel.org/r/ac9107acf24135e1a07e8f84d2090572d43e3fe4.1676712510.git.christophe.leroy@csgroup.eu
Sathvika Vasireddy [Fri, 17 Feb 2023 04:32:26 +0000 (10:02 +0530)]
powerpc/64: Fix unannotated intra-function call warning
objtool throws the following warning:
arch/powerpc/kernel/head_64.o: warning: objtool: .text+0x6128:
unannotated intra-function call
Fix the warning by annotating start_initialization_book3s symbol with the
SYM_FUNC_START_LOCAL and SYM_FUNC_END macros.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Fixes:
58f24eea5278 ("powerpc/64s: Refactor initialisation after prom")
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230217043226.1020041-1-sv@linux.ibm.com
Christophe Leroy [Mon, 19 Dec 2022 18:46:00 +0000 (19:46 +0100)]
powerpc/epapr: Don't use wrteei on non booke
wrteei is only for booke. Use the standard mfmsr/ori/mtmsr
when non booke.
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b29c7f1727433b003eae050e44072741c8ac223b.1671475543.git.christophe.leroy@csgroup.eu
Christophe Leroy [Mon, 19 Dec 2022 18:45:57 +0000 (19:45 +0100)]
powerpc: Pass correct CPU reference to assembler
Jan-Benedict reported issue with building ppc64e_defconfig
with mainline GCC work:
powerpc64-linux-gcc -Wp,-MMD,arch/powerpc/kernel/vdso/.gettimeofday-64.o.d -nostdinc -I./arch/powerpc/include -I./arch/powerpc/include/generated -I./include -I./arch/powerpc/include/uapi -I./arch/powerpc/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/compiler-version.h -include ./include/linux/kconfig.h -D__KERNEL__ -I ./arch/powerpc -DHAVE_AS_ATHIGH=1 -fmacro-prefix-map=./= -D__ASSEMBLY__ -fno-PIE -m64 -Wl,-a64 -mabi=elfv1 -Wa,-me500 -Wa,-me500mc -mabi=elfv1 -mbig-endian -Wl,-soname=linux-vdso64.so.1 -D__VDSO64__ -s -c -o arch/powerpc/kernel/vdso/gettimeofday-64.o arch/powerpc/kernel/vdso/gettimeofday.S
arch/powerpc/kernel/vdso/gettimeofday.S: Assembler messages:
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `stdu'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `stdu'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `std'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `std'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `ld'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `ld'
...
make[1]: *** [arch/powerpc/kernel/vdso/Makefile:76: arch/powerpc/kernel/vdso/gettimeofday-64.o] Error 1
make: *** [arch/powerpc/Makefile:387: vdso_prepare] Error 2
This is due to assembler being called with -me500mc which is
a 32 bits target.
The problem comes from the fact that CONFIG_PPC_E500MC is selected for
both the e500mc (32 bits) and the e5500 (64 bits), and therefore the
following makefile rule is wrong:
cpu-as-$(CONFIG_PPC_E500MC) += $(call as-option,-Wa$(comma)-me500mc)
Today we have CONFIG_TARGET_CPU which provides the identification of the
expected CPU, it is used for GCC. Once GCC knows the target CPU, it adds
the correct CPU option to assembler, no need to add it explicitly.
With that change (And also commit
45f7091aac35 ("powerpc/64: Set default
CPU in Kconfig")), it now is:
powerpc64-linux-gcc -Wp,-MMD,arch/powerpc/kernel/vdso/.gettimeofday-64.o.d -nostdinc -I./arch/powerpc/include -I./arch/powerpc/include/generated -I./include -I./arch/powerpc/include/uapi -I./arch/powerpc/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/compiler-version.h -include ./include/linux/kconfig.h -D__KERNEL__ -I ./arch/powerpc -DHAVE_AS_ATHIGH=1 -fmacro-prefix-map=./= -D__ASSEMBLY__ -fno-PIE -m64 -Wl,-a64 -mabi=elfv1 -mcpu=e500mc64 -mabi=elfv1 -mbig-endian -Wl,-soname=linux-vdso64.so.1 -D__VDSO64__ -s -c -o arch/powerpc/kernel/vdso/gettimeofday-64.o arch/powerpc/kernel/vdso/gettimeofday.S
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Pali Rohár <pali@kernel.org>
[mpe: Retain -Wa,-mpower4 -Wa,-many for Book3S 64 builds for now]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/758ad54128fa9dd2fdedc4c511592111cbded900.1671475543.git.christophe.leroy@csgroup.eu
Anders Roxell [Wed, 10 Aug 2022 11:43:18 +0000 (13:43 +0200)]
powerpc/mm: Rearrange if-else block to avoid clang warning
Clang warns:
arch/powerpc/mm/book3s64/radix_tlb.c:1191:23: error: variable 'hstart' is uninitialized when used here
__tlbiel_va_range(hstart, hend, pid,
^~~~~~
arch/powerpc/mm/book3s64/radix_tlb.c:1191:31: error: variable 'hend' is uninitialized when used here
__tlbiel_va_range(hstart, hend, pid,
^~~~
Rework the 'if (IS_ENABLE(CONFIG_TRANSPARENT_HUGEPAGE))' so hstart/hend
is always initialized to silence the warnings. That will also simplify
the 'else' path. Clang is getting confused with these warnings, but the
warnings is a false-positive.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220810114318.3220630-1-anders.roxell@linaro.org
Michael Ellerman [Thu, 16 Feb 2023 11:29:15 +0000 (22:29 +1100)]
powerpc/nohash: Fix build with llvm-as
When using the LLVM integrated assembler (llvm-as), the book3e build
fails with:
arch/powerpc/mm/nohash/tlb_low_64e.S:354:2: error: invalid instruction
tlbilxva 0,%r15
^
tlbilxva is an extended mnemonic for tlbilx, but llvm-as also doesn't
support tlbilx, despite it being an e500mc instruction.
Fix it by using the existing PPC_TLBILX_VA macro. The resulting binary
is identical when building with binutils.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230216112915.1681631-1-mpe@ellerman.id.au
Michael Ellerman [Mon, 13 Feb 2023 11:23:22 +0000 (22:23 +1100)]
powerpc/nohash: Fix build error with binutils >= 2.38
With bintils >= 2.38 the ppc64_book3e_allmodconfig build fails:
{standard input}: Assembler messages:
{standard input}:196: Error: unrecognized opcode: `lbarx'
{standard input}:196: Error: unrecognized opcode: `stbcx.'
make[5]: *** [scripts/Makefile.build:252: arch/powerpc/mm/nohash/e500_hugetlbpage.o] Error 1
That happens because the default CPU for that config is e5500, set via
CONFIG_TARGET_CPU, and so the assembler is building for e5500, which
doesn't support those instructions.
Fix it by using machine directives to tell the assembler to assemble the
relevant code for e6500, which does support lbarx/stbcx.
That is safe because the code already has the CPU_FTR_SMT check, which
ensures the lbarx sequence doesn't run on e5500, which doesn't support
SMT.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230213112322.998003-1-mpe@ellerman.id.au
Andrew Donnellan [Thu, 16 Feb 2023 07:09:03 +0000 (18:09 +1100)]
powerpc/pseries: Fix endianness issue when parsing PLPKS secvar flags
When a user updates a variable through the PLPKS secvar interface, we take
the first 8 bytes of the data written to the update attribute to pass
through to the H_PKS_SIGNED_UPDATE hcall as flags. These bytes are always
written in big-endian format.
Currently, the flags bytes are memcpy()ed into a u64, which is then loaded
into a register to pass as part of the hcall. This means that on LE
systems, the bytes are in the wrong order.
Use be64_to_cpup() instead, to ensure the flags bytes are byteswapped if
necessary.
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Fixes:
ccadf154cb00 ("powerpc/pseries: Implement secvars for dynamic secure boot")
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230216070903.355091-1-ajd@linux.ibm.com
Nathan Chancellor [Wed, 15 Feb 2023 17:12:12 +0000 (10:12 -0700)]
macintosh: windfarm: Use unsigned type for 1-bit bitfields
Clang warns:
drivers/macintosh/windfarm_lm75_sensor.c:63:14: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
lm->inited = 1;
^ ~
drivers/macintosh/windfarm_smu_sensors.c:356:19: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
pow->fake_volts = 1;
^ ~
drivers/macintosh/windfarm_smu_sensors.c:368:18: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
pow->quadratic = 1;
^ ~
There is no bug here since no code checks the actual value of these
fields, just whether or not they are zero (boolean context), but this
can be easily fixed by switching to an unsigned type.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230215-windfarm-wsingle-bit-bitfield-constant-conversion-v1-1-26415072e855@kernel.org
Sourabh Jain [Fri, 16 Dec 2022 12:27:08 +0000 (17:57 +0530)]
powerpc/kexec_file: print error string on usable memory property update failure
Print the FDT error description along with the error message if failed
to set the "linux,drconf-usable-memory" property in the kdump kernel's
FDT.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216122708.182154-1-sourabhjain@linux.ibm.com
Nathan Lynch [Mon, 13 Feb 2023 19:23:51 +0000 (13:23 -0600)]
powerpc/machdep: warn when machine_is() used too early
machine_is() can't provide correct results before probe_machine() has
run. Warn when it's used too early in boot, placing the WARN_ON() in a
helper function so the reported file:line indicates exactly what went
wrong.
checkpatch complains about __attribute__((weak)) in the patch, so
change that to __weak, and align the line continuations as well.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210-warn-on-machine-is-before-probe-machine-v2-1-b57f8243c51c@linux.ibm.com
Christophe Leroy [Mon, 19 Dec 2022 18:45:58 +0000 (19:45 +0100)]
powerpc/64: Replace -mcpu=e500mc64 by -mcpu=e5500
E500MC64 is a processor pre-dating E5500 that has never been
commercialised. Use -mcpu=e5500 for E5500 core.
More details at https://gcc.gnu.org/PR108149
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fa71ed20d22c156225436374f0ab847daac893bc.1671475543.git.christophe.leroy@csgroup.eu
Ganesh Goudar [Thu, 9 Feb 2023 10:56:49 +0000 (16:26 +0530)]
powerpc/eeh: Set channel state after notifying the drivers
When a PCI error is encountered 6th time in an hour we
set the channel state to perm_failure and notify the
driver about the permanent failure.
However, after upstream commit
38ddc011478e ("powerpc/eeh:
Make permanently failed devices non-actionable"), EEH handler
stops calling any routine once the device is marked as
permanent failure. This issue can lead to fatal consequences
like kernel hang with certain PCI devices.
Following log is observed with lpfc driver, with and without
this change, Without this change kernel hangs, If PCI error
is encountered 6 times for a device in an hour.
Without the change
EEH: Beginning: 'error_detected(permanent failure)'
PCI 0132:60:00.0#600000: EEH: not actionable (1,1,1)
PCI 0132:60:00.1#600000: EEH: not actionable (1,1,1)
EEH: Finished:'error_detected(permanent failure)'
With the change
EEH: Beginning: 'error_detected(permanent failure)'
EEH: Invoking lpfc->error_detected(permanent failure)
EEH: lpfc driver reports: 'disconnect'
EEH: Invoking lpfc->error_detected(permanent failure)
EEH: lpfc driver reports: 'disconnect'
EEH: Finished:'error_detected(permanent failure)'
To fix the issue, set channel state to permanent failure after
notifying the drivers.
Fixes:
38ddc011478e ("powerpc/eeh: Make permanently failed devices non-actionable")
Suggested-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230209105649.127707-1-ganeshgr@linux.ibm.com
Mathieu Desnoyers [Fri, 27 Jan 2023 13:57:42 +0000 (08:57 -0500)]
selftests/powerpc: Fix incorrect kernel headers search path
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230127135755.79929-22-mathieu.desnoyers@efficios.com
Nathan Lynch [Fri, 10 Feb 2023 18:42:08 +0000 (12:42 -0600)]
powerpc/rtas: arch-wide function token lookup conversions
With the tokens for all implemented RTAS functions now available via
rtas_function_token(), which is optimal and safe for arbitrary
contexts, there is no need to use rtas_token() or cache its result.
Most conversions are trivial, but a few are worth describing in more
detail:
* Error injection token comparisons for lockdown purposes are
consolidated into a simple predicate: token_is_restricted_errinjct().
* A couple of special cases in block_rtas_call() do not use
rtas_token() but perform string comparisons against names in the
function table. These are converted to compare against token values
instead, which is logically equivalent but less expensive.
* The lookup for the ibm,os-term token can be deferred until needed,
instead of caching it at boot to avoid device tree traversal during
panic.
* Since rtas_function_token() accesses a read-only data structure
without taking any locks, xmon's lookup of set-indicator can be
performed as needed instead of cached at startup.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-20-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:42:07 +0000 (12:42 -0600)]
powerpc/rtas: introduce rtas_function_token() API
Users of rtas_token() supply a string argument that can't be validated
at build time. A typo or misspelling has to be caught by inspection or
by observing wrong behavior at runtime.
Since the core RTAS code now has consolidated the names of all
possible RTAS functions and mapped them to their tokens, token lookup
can be implemented using symbolic constants to index a static array.
So introduce rtas_function_token(), a replacement API which does that,
along with a rtas_service_present()-equivalent helper,
rtas_function_implemented(). Callers supply an opaque predefined
function handle which is used internally to index the function
table. Typos or other inappropriate arguments yield build errors, and
the function handle is a type that can't be easily confused with RTAS
tokens or other integer types.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-19-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:42:06 +0000 (12:42 -0600)]
powerpc/pseries/lpar: convert to papr_sysparm API
Convert the TLB block invalidate characteristics discovery to the new
papr_sysparm API. This occurs too early in boot to use
papr_sysparm_buf_alloc(), so use a static buffer.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-18-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:42:05 +0000 (12:42 -0600)]
powerpc/pseries/hv-24x7: convert to papr_sysparm API
The new papr_sysparm API handles the details of system parameter
retrieval. Use that instead of open-coding the RTAS call, work area
management, and retries.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-17-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:42:04 +0000 (12:42 -0600)]
powerpc/pseries/lparcfg: convert to papr_sysparm API
/proc/powerpc/lparcfg derives the LPAR name and SPLPAR characteristics
it reports using bare calls to the RTAS ibm,get-system-parameter
function. Convert these to the higher-level papr_sysparm API, which
handles the tedious details.
While the SPLPAR string parsing code could stand to be updated, that
should be done in a separate change. It is minimally modified here to
reduce the risk of changing behavior.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-16-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:42:03 +0000 (12:42 -0600)]
powerpc/pseries: convert CMO probe to papr_sysparm API
Convert the direct invocation of the ibm,get-system-parameter RTAS
function to papr_sysparm_get().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-15-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:42:02 +0000 (12:42 -0600)]
powerpc/pseries: PAPR system parameter API
Introduce a set of APIs for retrieving and updating PAPR system
parameters. This encapsulates the toil of temporary RTAS work area
management, RTAS function call retries, and translation of RTAS call
statuses to conventional error values.
There are several places in the kernel that already retrieve system
parameters by calling the RTAS ibm,get-system-parameter function
directly. These will be converted to papr_sysparm_get() in changes to
follow.
As for updating system parameters, current practice is to use
sys_rtas() from user space; there are no in-kernel users of the RTAS
ibm,set-system-parameter function. However this will become deprecated
in time because it is not compatible with lockdown.
The papr_sysparm_* APIs will form the common basis for in-kernel
and user space access to system parameters. The code to expose the
set/get capabilities to user space will follow.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-14-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:42:01 +0000 (12:42 -0600)]
powerpc/pseries/dlpar: use RTAS work area API
Hold a work area object for the duration of the RTAS
ibm,configure-connector sequence, eliminating locking and copying
around each RTAS call.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-13-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:42:00 +0000 (12:42 -0600)]
powerpc/pseries: add RTAS work area allocator
Various pseries-specific RTAS functions take a temporary "work area"
parameter - a buffer in memory accessible to RTAS. Typically such
functions are passed the statically allocated rtas_data_buf buffer as
the argument. This buffer is protected by a global spinlock. So users
of rtas_data_buf cannot perform sleeping operations while accessing
the buffer.
Most RTAS functions that have a work area parameter can return a
status (-2/990x) that indicates that the caller should retry. Before
retrying, the caller may need to reschedule or sleep (see
rtas_busy_delay() for details). This combination of factors
leads to uncomfortable constructions like this:
do {
spin_lock(&rtas_data_buf_lock);
rc = rtas_call(token, __pa(rtas_data_buf, ...);
if (rc == 0) {
/* parse or copy out rtas_data_buf contents */
}
spin_unlock(&rtas_data_buf_lock);
} while (rtas_busy_delay(rc));
Another unfortunately common way of handling this is for callers to
blithely ignore the possibility of a -2/990x status and hope for the
best.
If users were allowed to perform blocking operations while owning a
work area, the programming model would become less tedious and
error-prone. Users could schedule away, sleep, or perform other
blocking operations without having to release and re-acquire
resources.
We could continue to use a single work area buffer, and convert
rtas_data_buf_lock to a mutex. But that would impose an unnecessarily
coarse serialization on all users. As awkward as the current design
is, it prevents longer running operations that need to repeatedly use
rtas_data_buf from blocking the progress of others.
There are more considerations. One is that while 4KB is fine for all
current in-kernel uses, some RTAS calls can take much smaller buffers,
and some (VPD, platform dumps) would likely benefit from larger
ones. Another is that at least one RTAS function (ibm,get-vpd)
has *two* work area parameters. And finally, we should expect the
number of work area users in the kernel to increase over time as we
introduce lockdown-compatible ABIs to replace less safe use cases
based on sys_rtas/librtas.
So a special-purpose allocator for RTAS work area buffers seems worth
trying.
Properties:
* The backing memory for the allocator is reserved early in boot in
order to satisfy RTAS addressing requirements, and then managed with
genalloc.
* Allocations can block, but they never fail (mempool-like).
* Prioritizes first-come, first-serve fairness over throughput.
* Early boot allocations before the allocator has been initialized are
served via an internal static buffer.
Intended to replace rtas_data_buf. New code that needs RTAS work area
buffers should prefer this API.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-12-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:41:59 +0000 (12:41 -0600)]
powerpc/rtas: add tracepoints around RTAS entry
Decompose the RTAS entry C code into tracing and non-tracing variants,
calling the just-added tracepoints in the tracing-enabled path. Skip
tracing in contexts known to be unsafe (real mode, CPU offline).
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-11-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:41:58 +0000 (12:41 -0600)]
powerpc/tracing: tracepoints for RTAS entry and exit
Add two sets of tracepoints to be used around RTAS entry:
* rtas_input/rtas_output, which emit the function name, its inputs,
the returned status, and any other outputs. These produce an API-level
record of OS<->RTAS activity.
* rtas_ll_entry/rtas_ll_exit, which are lower-level and emit the
entire contents of the parameter block (aka rtas_args) on entry and
exit. Likely useful only for debugging.
With uses of these tracepoints in do_enter_rtas() to be added in the
following patch, examples of get-time-of-day and event-scan functions
as rendered by trace-cmd (with some multi-line formatting manually
imposed on the rtas_ll_* entries to avoid extremely long lines in the
commit message):
cat-36800 [059] 4978.518303: rtas_input: get-time-of-day arguments:
cat-36800 [059] 4978.518306: rtas_ll_entry: token=3 nargs=0 nret=8
params: [0]=0x00000000 [1]=0x00000000 [2]=0x00000000 [3]=0x00000000
[4]=0x00000000 [5]=0x00000000 [6]=0x00000000 [7]=0x00000000
[8]=0x00000000 [9]=0x00000000 [10]=0x00000000 [11]=0x00000000
[12]=0x00000000 [13]=0x00000000 [14]=0x00000000 [15]=0x00000000
cat-36800 [059] 4978.518366: rtas_ll_exit: token=3 nargs=0 nret=8
params: [0]=0x00000000 [1]=0x000007e6 [2]=0x0000000b [3]=0x00000001
[4]=0x00000000 [5]=0x0000000e [6]=0x00000008 [7]=0x2e0dac40
[8]=0x00000000 [9]=0x00000000 [10]=0x00000000 [11]=0x00000000
[12]=0x00000000 [13]=0x00000000 [14]=0x00000000 [15]=0x00000000
cat-36800 [059] 4978.518366: rtas_output: get-time-of-day status: 0, other outputs: 2022 11 1 0 14 8
772648000
kworker/39:1-336 [039] 4982.731623: rtas_input: event-scan arguments:
4294967295 0
80484920 2048
kworker/39:1-336 [039] 4982.731626: rtas_ll_entry: token=6 nargs=4 nret=1
params: [0]=0xffffffff [1]=0x00000000 [2]=0x04cc1a38 [3]=0x00000800
[4]=0x00000000 [5]=0x0000000e [6]=0x00000008 [7]=0x2e0dac40
[8]=0x00000000 [9]=0x00000000 [10]=0x00000000 [11]=0x00000000
[12]=0x00000000 [13]=0x00000000 [14]=0x00000000 [15]=0x00000000
kworker/39:1-336 [039] 4982.731676: rtas_ll_exit: token=6 nargs=4 nret=1
params: [0]=0xffffffff [1]=0x00000000 [2]=0x04cc1a38 [3]=0x00000800
[4]=0x00000001 [5]=0x0000000e [6]=0x00000008 [7]=0x2e0dac40
[8]=0x00000000 [9]=0x00000000 [10]=0x00000000 [11]=0x00000000
[12]=0x00000000 [13]=0x00000000 [14]=0x00000000 [15]=0x00000000
kworker/39:1-336 [039] 4982.731677: rtas_output: event-scan status: 1, other outputs:
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-10-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:41:57 +0000 (12:41 -0600)]
powerpc/rtas: strengthen do_enter_rtas() type safety, drop inline
Make do_enter_rtas() take a pointer to struct rtas_args and do the
__pa() conversion in one place instead of leaving it to callers. This
also makes it possible to introduce enter/exit tracepoints that access
the rtas_args struct fields.
There's no apparent reason to force inlining of do_enter_rtas()
either, and it seems to bloat the code a bit. Let the compiler decide.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-9-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:41:56 +0000 (12:41 -0600)]
powerpc/rtas: improve function information lookups
The core RTAS support code and its clients perform two types of lookup
for RTAS firmware function information.
First, mapping a known function name to a token. The typical use case
invokes rtas_token() to retrieve the token value to pass to
rtas_call(). rtas_token() relies on of_get_property(), which performs
a linear search of the /rtas node's property list under a lock with
IRQs disabled.
Second, and less common: given a token value, looking up some
information about the function. The primary example is the sys_rtas
filter path, which linearly scans a small table to match the token to
a rtas_filter struct. Another use case to come is RTAS entry/exit
tracepoints, which will require efficient lookup of function names
from token values. Currently there is no general API for this.
We need something much like the existing rtas_filters table, but more
general and organized to facilitate efficient lookups.
Introduce:
* A new rtas_function type, aggregating function name, token,
and filter. Other function characteristics could be added in the
future.
* An array of rtas_function, where each element corresponds to a known
RTAS function. All information in the table is static save the token
values, which are derived from the device tree at boot. The array is
sorted by function name to allow binary search.
* A named constant for each known RTAS function, used to index the
function array. These also will be used in a client-facing API to be
added later.
* An xarray that maps valid tokens to rtas_function objects.
Fold the existing rtas_filter table into the new rtas_function array,
with the appropriate adjustments to block_rtas_call(). Remove
now-redundant fields from struct rtas_filter. Preserve the function of
the CONFIG_CPU_BIG_ENDIAN guard in the current filter table by
introducing a per-function flag that is set for the function entries
related to pseries LPAR migration. These have never had working users
via sys_rtas on ppc64le; see commit
de0f7349a0dd ("powerpc/rtas:
prevent suspend-related sys_rtas use on LE").
Convert rtas_token() to use a lockless binary search on the function
table. Fall back to the old behavior for lookups against names that
are not known to be RTAS functions, but issue a warning. rtas_token()
is for function names; it is not a general facility for accessing
arbitrary properties of the /rtas node. All known misuses of
rtas_token() have been converted to more appropriate of_ APIs in
preceding changes.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-8-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:41:55 +0000 (12:41 -0600)]
powerpc/pseries: drop RTAS-based timebase synchronization
The pseries platform has been LPAR-only for several generations, and
the PAPR spec:
* Guarantees that timebase synchronization is performed by
the platform ("The timebase registers are synchronized by the
platform before CPUs are given to the OS" - 7.3.8 SMP Support).
* Completely omits the RTAS freeze-time-base and thaw-time-base RTAS
functions, which are CHRP artifacts.
This code is effectively unused on currently supported models, so drop
it.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-7-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:41:54 +0000 (12:41 -0600)]
powerpc/rtas: ensure 4KB alignment for rtas_data_buf
Some RTAS functions that have work area parameters impose alignment
requirements on the work area passed to them by the OS. Examples
include:
- ibm,configure-connector
- ibm,update-nodes
- ibm,update-properties
4KB is the greatest alignment required by PAPR for such
buffers. rtas_data_buf used to have a __page_aligned attribute in the
arch/ppc64 days, but that was changed to __cacheline_aligned for
unknown reasons by commit
033ef338b6e0 ("powerpc: Merge rtas.c into
arch/powerpc/kernel"). That works out to 128-byte alignment
on ppc64, which isn't right.
This was found by inspection and I'm not aware of any real problems
caused by this. Either current RTAS implementations don't enforce the
alignment constraints, or rtas_data_buf is always being placed at a
4KB boundary by accident (or both, perhaps).
Use __aligned(SZ_4K) to ensure the rtas_data_buf has alignment
appropriate for all users.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes:
033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-6-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:41:53 +0000 (12:41 -0600)]
powerpc/pseries/setup: add missing RTAS retry status handling
The ibm,get-system-parameter RTAS function may return -2 or 990x,
which indicate that the caller should try again.
pSeries_cmo_feature_init() ignores this, making it possible to fail to
detect cooperative memory overcommit capabilities during boot.
Move the RTAS call into a conventional rtas_busy_delay()-based
loop, dropping unnecessary clearing of rtas_data_buf.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-5-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:41:52 +0000 (12:41 -0600)]
powerpc/pseries/lparcfg: add missing RTAS retry status handling
The ibm,get-system-parameter RTAS function may return -2 or 990x,
which indicate that the caller should try again.
lparcfg's parse_system_parameter_string() ignores this, making it
possible to intermittently report incorrect SPLPAR characteristics.
Move the RTAS call into a coventional rtas_busy_delay()-based loop.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-4-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:41:51 +0000 (12:41 -0600)]
powerpc/pseries/lpar: add missing RTAS retry status handling
The ibm,get-system-parameter RTAS function may return -2 or 990x,
which indicate that the caller should try again.
pseries_lpar_read_hblkrm_characteristics() ignores this, making it
possible to incorrectly detect TLB block invalidation characteristics
at boot.
Move the RTAS call into a coventional rtas_busy_delay()-based loop.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes:
1211ee61b4a8 ("powerpc/pseries: Read TLB Block Invalidate Characteristics")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-3-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:41:50 +0000 (12:41 -0600)]
powerpc/perf/hv-24x7: add missing RTAS retry status handling
The ibm,get-system-parameter RTAS function may return -2 or 990x,
which indicate that the caller should try again. read_24x7_sys_info()
ignores this, allowing transient failures in reporting processor
module information.
Move the RTAS call into a coventional rtas_busy_delay()-based loop,
along with the parsing of results on success.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes:
8ba214267382 ("powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor details")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-2-26929c8cce78@linux.ibm.com
Nathan Lynch [Fri, 10 Feb 2023 18:41:49 +0000 (12:41 -0600)]
powerpc/rtas: handle extended delays safely in early boot
Some code that runs early in boot calls RTAS functions that can return
-2 or 990x statuses, which mean the caller should retry. An example is
pSeries_cmo_feature_init(), which invokes ibm,get-system-parameter but
treats these benign statuses as errors instead of retrying.
pSeries_cmo_feature_init() and similar code should be made to retry
until they succeed or receive a real error, using the usual pattern:
do {
rc = rtas_call(token, etc...);
} while (rtas_busy_delay(rc));
But rtas_busy_delay() will perform a timed sleep on any 990x
status. This isn't safe so early in boot, before the CPU scheduler and
timer subsystem have initialized.
The -2 RTAS status is much more likely to occur during single-threaded
boot than 990x in practice, at least on PowerVM. This is because -2
usually means that RTAS made progress but exhausted its self-imposed
timeslice, while 990x is associated with concurrent requests from the
OS causing internal contention. Regardless, according to the language
in PAPR, the OS should be prepared to handle either type of status at
any time.
Add a fallback path to rtas_busy_delay() to handle this as safely as
possible, performing a small delay on 990x. Include a counter to
detect retry loops that aren't making progress and bail out. Add __ref
to rtas_busy_delay() since it now conditionally calls an __init
function.
This was found by inspection and I'm not aware of any real
failures. However, the implementation of rtas_busy_delay() before
commit
38f7b7067dae ("powerpc/rtas: rtas_busy_delay() improvements")
was not susceptible to this problem, so let's treat this as a
regression.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes:
38f7b7067dae ("powerpc/rtas: rtas_busy_delay() improvements")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-1-26929c8cce78@linux.ibm.com
Russell Currey [Fri, 10 Feb 2023 08:04:01 +0000 (19:04 +1100)]
integrity/powerpc: Support loading keys from PLPKS
Add support for loading keys from the PLPKS on pseries machines, with the
"ibm,plpks-sb-v1" format.
The object format is expected to be the same, so there shouldn't be any
functional differences between objects retrieved on powernv or pseries.
Unlike on powernv, on pseries the format string isn't contained in the
device tree. Use secvar_ops->format() to fetch the format string in a
generic manner, rather than searching the device tree ourselves.
(The current code searches the device tree for a node compatible with
"ibm,edk2-compat-v1". This patch switches to calling secvar_ops->format(),
which in the case of OPAL/powernv means opal_secvar_format(), which
searches the device tree for a node compatible with "ibm,secvar-backend"
and checks its "format" property. These are equivalent, as skiboot creates
a node with both "ibm,edk2-compat-v1" and "ibm,secvar-backend" as
compatible strings.)
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-27-ajd@linux.ibm.com
Russell Currey [Fri, 10 Feb 2023 08:04:00 +0000 (19:04 +1100)]
integrity/powerpc: Improve error handling & reporting when loading certs
A few improvements to load_powerpc.c:
- include integrity.h for the pr_fmt()
- move all error reporting out of get_cert_list()
- use ERR_PTR() to better preserve error detail
- don't use pr_err() for missing keys
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-26-ajd@linux.ibm.com
Russell Currey [Fri, 10 Feb 2023 08:03:59 +0000 (19:03 +1100)]
powerpc/pseries: Implement secvars for dynamic secure boot
The pseries platform can support dynamic secure boot (i.e. secure boot
using user-defined keys) using variables contained with the PowerVM LPAR
Platform KeyStore (PLPKS). Using the powerpc secvar API, expose the
relevant variables for pseries dynamic secure boot through the existing
secvar filesystem layout.
The relevant variables for dynamic secure boot are signed in the
keystore, and can only be modified using the H_PKS_SIGNED_UPDATE hcall.
Object labels in the keystore are encoded using ucs2 format. With our
fixed variable names we don't have to care about encoding outside of the
necessary byte padding.
When a user writes to a variable, the first 8 bytes of data must contain
the signed update flags as defined by the hypervisor.
When a user reads a variable, the first 4 bytes of data contain the
policies defined for the object.
Limitations exist due to the underlying implementation of sysfs binary
attributes, as is the case for the OPAL secvar implementation -
partial writes are unsupported and writes cannot be larger than PAGE_SIZE.
(Even when using bin_attributes, which can be larger than a single page,
sysfs only gives us one page's worth of write buffer at a time, and the
hypervisor does not expose an interface for partial writes.)
Co-developed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Add NLS dependency to fix build errors, squash fix from ajd]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-25-ajd@linux.ibm.com
Russell Currey [Fri, 10 Feb 2023 08:03:58 +0000 (19:03 +1100)]
powerpc/pseries: Pass PLPKS password on kexec
Before interacting with the PLPKS, we ask the hypervisor to generate a
password for the current boot, which is then required for most further
PLPKS operations.
If we kexec into a new kernel, the new kernel will try and fail to
generate a new password, as the password has already been set.
Pass the password through to the new kernel via the device tree, in
/chosen/ibm,plpks-pw. Check for the presence of this property before
trying to generate a new password - if it exists, use the existing
password and remove it from the device tree.
This only works with the kexec_file_load() syscall, not the older
kexec_load() syscall, however if you're using Secure Boot then you want
to be using kexec_file_load() anyway.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-24-ajd@linux.ibm.com
Russell Currey [Fri, 10 Feb 2023 08:03:57 +0000 (19:03 +1100)]
powerpc/pseries: Add helper to get PLPKS password length
Add helper function to get the PLPKS password length. This will be used
in a later patch to support passing the password between kernels over
kexec.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-23-ajd@linux.ibm.com
Andrew Donnellan [Fri, 10 Feb 2023 08:03:56 +0000 (19:03 +1100)]
powerpc/pseries: Clarify warning when PLPKS password already set
When the H_PKS_GEN_PASSWORD hcall returns H_IN_USE, operations that require
authentication (i.e. anything other than reading a world-readable variable)
will not work.
The current error message doesn't explain this clearly enough. Reword it
to emphasise that authenticated operations will fail.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-22-ajd@linux.ibm.com
Andrew Donnellan [Fri, 10 Feb 2023 08:03:55 +0000 (19:03 +1100)]
powerpc/pseries: Turn PSERIES_PLPKS into a hidden option
It seems a bit unnecessary for the PLPKS code to have a user-visible
config option when it doesn't do anything on its own, and there's existing
options for enabling Secure Boot-related features.
It should be enabled by PPC_SECURE_BOOT, which will eventually be what
uses PLPKS to populate keyrings.
However, we can't get of the separate option completely, because it will
also be used for SED Opal purposes.
Change PSERIES_PLPKS into a hidden option, which is selected by
PPC_SECURE_BOOT.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-21-ajd@linux.ibm.com
Andrew Donnellan [Fri, 10 Feb 2023 08:03:54 +0000 (19:03 +1100)]
powerpc/pseries: Make caller pass buffer to plpks_read_var()
Currently, plpks_read_var() allocates a buffer to pass to the
H_PKS_READ_OBJECT hcall, then allocates another buffer into which the data
is copied, and returns that buffer to the caller.
This is a bit over the top - while we probably still want to allocate a
separate buffer to pass to the hypervisor in the hcall, we can let the
caller allocate the final buffer and specify the size.
Don't allocate var->data in plpks_read_var(), instead expect the caller to
allocate it. If the caller needs to discover the size, it can set
var->data to NULL and var->datalen will be populated. Update header file
to document this.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-20-ajd@linux.ibm.com
Russell Currey [Fri, 10 Feb 2023 08:03:53 +0000 (19:03 +1100)]
powerpc/pseries: Log hcall return codes for PLPKS debug
The plpks code converts hypervisor return codes into their Linux
equivalents so that users can understand them. Having access to the
original return codes is really useful for debugging, so add a
pr_debug() so we don't lose information from the conversion.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-19-ajd@linux.ibm.com
Nayna Jain [Fri, 10 Feb 2023 08:03:52 +0000 (19:03 +1100)]
powerpc/pseries: Implement signed update for PLPKS objects
The Platform Keystore provides a signed update interface which can be used
to create, replace or append to certain variables in the PKS in a secure
fashion, with the hypervisor requiring that the update be signed using the
Platform Key.
Implement an interface to the H_PKS_SIGNED_UPDATE hcall in the plpks
driver to allow signed updates to PKS objects.
(The plpks driver doesn't need to do any cryptography or otherwise handle
the actual signed variable contents - that will be handled by userspace
tooling.)
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
[ajd: split patch, add timeout handling and misc cleanups]
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-18-ajd@linux.ibm.com
Nayna Jain [Fri, 10 Feb 2023 08:03:51 +0000 (19:03 +1100)]
powerpc/pseries: Expose PLPKS config values, support additional fields
The plpks driver uses the H_PKS_GET_CONFIG hcall to retrieve configuration
and status information about the PKS from the hypervisor.
Update _plpks_get_config() to handle some additional fields. Add getter
functions to allow the PKS configuration information to be accessed from
other files. Validate that the values we're getting comply with the spec.
While we're here, move the config struct in _plpks_get_config() off the
stack - it's getting large and we also need to make sure it doesn't cross
a page boundary.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
[ajd: split patch, extend to support additional v3 API fields, minor fixes]
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-17-ajd@linux.ibm.com
Russell Currey [Fri, 10 Feb 2023 08:03:50 +0000 (19:03 +1100)]
powerpc/pseries: Move PLPKS constants to header file
Move the constants defined in plpks.c to plpks.h, and standardise their
naming, so that PLPKS consumers can make use of them later on.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-16-ajd@linux.ibm.com
Russell Currey [Fri, 10 Feb 2023 08:03:49 +0000 (19:03 +1100)]
powerpc/pseries: Move plpks.h to include directory
Move plpks.h from platforms/pseries/ to include/asm/. This is necessary
for later patches to make use of the PLPKS from code in other subsystems.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-15-ajd@linux.ibm.com
Andrew Donnellan [Fri, 10 Feb 2023 08:03:48 +0000 (19:03 +1100)]
powerpc/secvar: Don't print error on ENOENT when reading variables
If attempting to read the size or data attributes of a non-existent
variable (which will be possible after a later patch to expose the PLPKS
via the secvar interface), don't spam the kernel log with error messages.
Only print errors for return codes that aren't ENOENT.
Reported-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-14-ajd@linux.ibm.com
Andrew Donnellan [Fri, 10 Feb 2023 08:03:47 +0000 (19:03 +1100)]
powerpc/secvar: Warn when PAGE_SIZE is smaller than max object size
Due to sysfs constraints, when writing to a variable, we can only handle
writes of up to PAGE_SIZE.
It's possible that the maximum object size is larger than PAGE_SIZE, in
which case, print a warning on boot so that the user is aware.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-13-ajd@linux.ibm.com
Andrew Donnellan [Fri, 10 Feb 2023 08:03:46 +0000 (19:03 +1100)]
powerpc/secvar: Allow backend to populate static list of variable names
Currently, the list of variables is populated by calling
secvar_ops->get_next() repeatedly, which is explicitly modelled on the
OPAL API (including the keylen parameter).
For the upcoming PLPKS backend, we have a static list of variable names.
It is messy to fit that into get_next(), so instead, let the backend put
a NULL-terminated array of variable names into secvar_ops->var_names,
which will be used if get_next() is undefined.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-12-ajd@linux.ibm.com
Russell Currey [Fri, 10 Feb 2023 08:03:45 +0000 (19:03 +1100)]
powerpc/secvar: Extend sysfs to include config vars
The forthcoming pseries consumer of the secvar API wants to expose a
number of config variables. Allowing secvar implementations to provide
their own sysfs attributes makes it easy for consumers to expose what
they need to.
This is not being used by the OPAL secvar implementation at present, and
the config directory will not be created if no attributes are set.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-11-ajd@linux.ibm.com
Andrew Donnellan [Fri, 10 Feb 2023 08:03:44 +0000 (19:03 +1100)]
powerpc/secvar: Clean up init error messages
Remove unnecessary prefixes from error messages in secvar_sysfs_init()
(the file defines pr_fmt, so putting "secvar:" in every message is
unnecessary). Make capitalisation and punctuation more consistent.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-10-ajd@linux.ibm.com
Russell Currey [Fri, 10 Feb 2023 08:03:43 +0000 (19:03 +1100)]
powerpc/secvar: Handle max object size in the consumer
Currently the max object size is handled in the core secvar code with an
entirely OPAL-specific implementation, so create a new max_size() op and
move the existing implementation into the powernv platform. Should be
no functional change.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-9-ajd@linux.ibm.com
Russell Currey [Fri, 10 Feb 2023 08:03:42 +0000 (19:03 +1100)]
powerpc/secvar: Handle format string in the consumer
The code that handles the format string in secvar-sysfs.c is entirely
OPAL specific, so create a new "format" op in secvar_operations to make
the secvar code more generic. No functional change.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-8-ajd@linux.ibm.com
Russell Currey [Fri, 10 Feb 2023 08:03:41 +0000 (19:03 +1100)]
powerpc/secvar: Use sysfs_emit() instead of sprintf()
The secvar format string and object size sysfs files are both ASCII
text, and should use sysfs_emit(). No functional change.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-7-ajd@linux.ibm.com
Russell Currey [Fri, 10 Feb 2023 08:03:40 +0000 (19:03 +1100)]
powerpc/secvar: Warn and error if multiple secvar ops are set
The secvar code only supports one consumer at a time.
Multiple consumers aren't possible at this point in time, but we'd want
it to be obvious if it ever could happen.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-6-ajd@linux.ibm.com
Michael Ellerman [Fri, 10 Feb 2023 08:03:39 +0000 (19:03 +1100)]
powerpc/secvar: Use u64 in secvar_operations
There's no reason for secvar_operations to use uint64_t vs the more
common kernel type u64.
The types are compatible, but they require different printk format
strings which can lead to confusion.
Change all the secvar related routines to use u64.
Reviewed-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-5-ajd@linux.ibm.com
Russell Currey [Fri, 10 Feb 2023 08:03:38 +0000 (19:03 +1100)]
powerpc/secvar: Fix incorrect return in secvar_sysfs_load()
secvar_ops->get_next() returns -ENOENT when there are no more variables
to return, which is expected behaviour.
Fix this by returning 0 if get_next() returns -ENOENT.
This fixes an issue introduced in commit
bd5d9c743d38 ("powerpc: expose
secure variables to userspace via sysfs"), but the return code of
secvar_sysfs_load() was never checked so this issue never mattered.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-4-ajd@linux.ibm.com
Andrew Donnellan [Fri, 10 Feb 2023 08:03:37 +0000 (19:03 +1100)]
powerpc/pseries: Fix alignment of PLPKS structures and buffers
A number of structures and buffers passed to PKS hcalls have alignment
requirements, which could on occasion cause problems:
- Authorisation structures must be 16-byte aligned and must not cross a
page boundary
- Label structures must not cross page boundaries
- Password output buffers must not cross page boundaries
To ensure correct alignment, we adjust the allocation size of each of
these structures/buffers to be the closest power of 2 that is at least the
size of the structure/buffer (since kmalloc() guarantees that an
allocation of a power of 2 size will be aligned to at least that size).
Reported-by: Benjamin Gray <bgray@linux.ibm.com>
Fixes:
2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-3-ajd@linux.ibm.com
Andrew Donnellan [Fri, 10 Feb 2023 08:03:36 +0000 (19:03 +1100)]
powerpc/pseries: Fix handling of PLPKS object flushing timeout
plpks_confirm_object_flushed() uses the H_PKS_CONFIRM_OBJECT_FLUSHED hcall
to check whether changes to an object in the Platform KeyStore have been
flushed to non-volatile storage.
The hcall returns two output values, the return code and the flush status.
plpks_confirm_object_flushed() polls the hcall until either the flush
status has updated, the return code is an error, or a timeout has been
exceeded.
While we're still polling, the hcall is returning H_SUCCESS (0) as the
return code. In the timeout case, this means that upon exiting the polling
loop, rc is 0, and therefore 0 is returned to the user.
Handle the timeout case separately and return ETIMEDOUT if triggered.
Fixes:
2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore")
Reported-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Tested-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-2-ajd@linux.ibm.com
Michael Ellerman [Sun, 12 Feb 2023 11:11:56 +0000 (22:11 +1100)]
Merge branch 'fixes' into next
Merge our fixes branch to bring in some changes that conflict with
upcoming next content.
Geoff Levand [Tue, 3 Jan 2023 17:51:03 +0000 (17:51 +0000)]
powerpc/ps3: Refresh ps3_defconfig
Refresh ps3_defconfig for v6.2.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/99e87549b17feca3494e9df6f4def04a9ec7c042.1672767868.git.geoff@infradead.org
Geoff Levand [Tue, 3 Jan 2023 17:51:03 +0000 (17:51 +0000)]
powerpc/ps3: Change updateboltedpp() panic to info
Commit
fdacae8a8402 ("powerpc: Activate CONFIG_STRICT_KERNEL_RWX by
default") causes ps3_hpte_updateboltedpp() to be called.
The correct fix would be to implement updateboltedpp() for PS3, but it's
not clear if that's possible. As a stop-gap, change the panic statment
in ps3_hpte_updateboltedpp() to a pr_info statement so that bootup can
continue.
Signed-off-by: Geoff Levand <geoff@infradead.org>
[mpe: Flesh out change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2df879d982809c05b0dfade57942fe03dbe9e7de.1672767868.git.geoff@infradead.org
Rohan McLure [Mon, 6 Feb 2023 02:18:01 +0000 (13:18 +1100)]
powerpc/kcsan: Add KCSAN Support
Enable HAVE_ARCH_KCSAN for 64-bit Book3S, permitting use of the kernel
concurrency sanitiser through the CONFIG_KCSAN_* kconfig options. KCSAN
requires compiler builtins __atomic_* 64-bit values, and so only report
support on 64-bit.
See documentation in Documentation/dev-tools/kcsan.rst for more
information.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
[mpe: Limit to Book3S to avoid build failure on Book3E]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206021801.105268-6-rmclure@linux.ibm.com
Rohan McLure [Mon, 6 Feb 2023 02:18:00 +0000 (13:18 +1100)]
powerpc/kcsan: Prevent recursive instrumentation with IRQ save/restores
Instrumented memory accesses provided by KCSAN will access core-local
memories (which will save and restore IRQs) as well as restoring IRQs
directly. Avoid recursive instrumentation by applying __no_kcsan
annotation to IRQ restore routines.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
[mpe: Resolve merge conflict with IRQ replay recursion changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206021801.105268-5-rmclure@linux.ibm.com
Rohan McLure [Mon, 6 Feb 2023 02:17:59 +0000 (13:17 +1100)]
powerpc/kcsan: Memory barriers semantics
Annotate memory barriers *mb() with calls to kcsan_mb(), signaling to
compilers supporting KCSAN that the respective memory barrier has been
issued. Rename memory barrier *mb() to __*mb() to opt in for
asm-generic/barrier.h to generate the respective *mb() macro.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206021801.105268-4-rmclure@linux.ibm.com
Rohan McLure [Mon, 6 Feb 2023 02:17:58 +0000 (13:17 +1100)]
powerpc/kcsan: Exclude udelay to prevent recursive instrumentation
In order for KCSAN to increase its likelihood of observing a data race,
it sets a watchpoint on memory accesses and stalls, allowing for
detection of conflicting accesses by other kernel threads or interrupts.
Stalls are implemented by injecting a call to udelay in instrumented code.
To prevent recursive instrumentation, exclude udelay from being instrumented.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206021801.105268-3-rmclure@linux.ibm.com
Rohan McLure [Mon, 6 Feb 2023 02:17:57 +0000 (13:17 +1100)]
powerpc/kcsan: Add exclusions from instrumentation
Exclude various incompatible compilation units from KCSAN
instrumentation.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206021801.105268-2-rmclure@linux.ibm.com
Nicholas Piggin [Fri, 16 Dec 2022 11:59:30 +0000 (21:59 +1000)]
powerpc: Skip stack validation checking alternate stacks if they are not allocated
Stack validation in early boot can just bail out of checking alternate
stacks if they are not validated yet. Checking against a NULL stack
could cause NULLish pointer values to be considered valid.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216115930.2667772-5-npiggin@gmail.com
Nicholas Piggin [Fri, 16 Dec 2022 11:59:29 +0000 (21:59 +1000)]
powerpc/64: Move paca allocation to early_setup()
The early paca and boot cpuid dance is complicated and currently does
not quite work as expected for boot cpuid != 0 cases.
early_init_devtree() currently allocates the paca_ptrs and boot cpuid
paca, but until that returns and early_setup() calls setup_paca(), this
thread is currently still executing with smp_processor_id() == 0.
One problem this causes is the paca_ptrs[smp_processor_id()] pointer is
poisoned, so valid_emergency_stack() (any backtrace) and any similar
users will crash.
Another is that the hardware id which is set here will not be returned
by get_hard_smp_processor_id(smp_processor_id()), but it would work
correctly for boot_cpuid == 0, which could lead to difficult to
reproduce or find bugs. The hard id does not seem to be used by the rest
of early_init_devtree(), it just looks like all this code might have
been put here to allocate somewhere to store boot CPU hardware id while
scanning the devtree.
Rearrange things so the hwid is put in a global variable like
boot_cpuid, and do all the paca allocation and boot paca setup in the
64-bit early_setup() after we have everything ready to go.
The paca_ptrs[0] re-poisoning code in early_setup does not seem to have
ever worked, because paca_ptrs[0] was never not-poisoned when boot_cpuid
is not 0.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix build error on 32-bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216115930.2667772-4-npiggin@gmail.com
Nicholas Piggin [Fri, 16 Dec 2022 11:59:28 +0000 (21:59 +1000)]
powerpc/64: Fix task_cpu in early boot when booting non-zero cpuid
powerpc/64 can boot on a non-zero SMP processor id. Initially, the boot
CPU is said to be "assumed to be 0" until early_init_devtree() discovers
the id from the device tree. That is not a good description because the
assumption can be wrong and that has to be handled, the better
description is that 0 is used as a placeholder, and things are fixed
after the real id is discovered.
smp_processor_id() is set to the boot cpuid, but task_cpu(current) is
not, which causes the smp_processor_id() == task_cpu(current) invariant
to be broken until init_idle() in sched_init().
This is quite fragile and could lead to subtle bugs in future. One bug
is that validate_sp_size uses task_cpu() to get the process stack, so
any stack trace from the booting CPU between early_init_devtree()
and sched_init() will have problems. Early on paca_ptrs[0] will be
poisoned, so that can cause machine checks dereferencing that memory
in real mode. Later, validating the current stack pointer against the
idle task of a different secondary will probably cause no stack trace
to be printed.
Fix this by setting thread_info->cpu right after smp_processor_id() is
set to the boot cpuid.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix SMP=n build as reported by sfr]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216115930.2667772-3-npiggin@gmail.com
Nicholas Piggin [Fri, 16 Dec 2022 11:59:27 +0000 (21:59 +1000)]
powerpc/64s: Fix stress_hpt memblock alloc alignment
The stress_hpt memblock allocation did not pass in an alignment,
which causes a stack dump in early boot (that I missed, oops).
Fixes:
6b34a099faa1 ("powerpc/64s/hash: add stress_hpt kernel boot option to increase hash faults")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221216115930.2667772-2-npiggin@gmail.com
Nicholas Piggin [Fri, 3 Feb 2023 11:38:58 +0000 (21:38 +1000)]
powerpc/64e: Simplify address calculation in secondary hold loop
As the earlier comment explains, __secondary_hold_spinloop does not have
to be accessed at its virtual address, slightly simplifying code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203113858.1152093-4-npiggin@gmail.com
Nicholas Piggin [Fri, 3 Feb 2023 11:38:57 +0000 (21:38 +1000)]
powerpc/64s: Refactor initialisation after prom
Move some basic Book3S initialisation after prom to a function similar
to what Book3E looks like. Book3E returns from this function at the
virtual address mapping, and Book3S will do the same in a later change,
so making them look similar helps with that.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203113858.1152093-3-npiggin@gmail.com
Nicholas Piggin [Fri, 3 Feb 2023 11:38:56 +0000 (21:38 +1000)]
crypto: powerpc - Use address generation helper for asm
Replace open-coded toc-relative address calculation with helper macros,
commit
dab3b8f4fd09 ("powerpc/64: asm use consistent global variable
declaration and access") made similar conversions already but missed
this one.
This allows data addressing model to be changed more easily.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203113858.1152093-2-npiggin@gmail.com
Frederic Barrat [Fri, 20 Jan 2023 09:32:15 +0000 (10:32 +0100)]
powerpc/powernv/ioda: Skip unallocated resources when mapping to PE
pnv_ioda_setup_pe_res() calls opal to map a resource with a PE. However,
the code assumes the resource is allocated and it uses the resource
address to find out the segment(s) which need to be mapped to the
PE. In the unlikely case where the resource hasn't been allocated, the
computation for the segment number is garbage, which can lead to
invalid memory access and potentially a kernel crash, such as:
[ ] pci_bus 0002:02: Configuring PE for bus
[ ] pci 0002:02 : [PE# fc] Secondary bus 0x0000000000000002..0x0000000000000002 associated with PE#fc
[ ] BUG: Kernel NULL pointer dereference on write at 0x00000000
[ ] Faulting instruction address: 0xc00000000005eac4
[ ] Oops: Kernel access of bad area, sig: 7 [#1]
[ ] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
[ ] Modules linked in:
[ ] CPU: 12 PID: 1 Comm: swapper/20 Not tainted 5.10.50-openpower1 #2
[ ] NIP:
c00000000005eac4 LR:
c00000000005ea44 CTR:
0000000030061b9c
[ ] REGS:
c000200007383650 TRAP: 0300 Not tainted (5.10.50-openpower1)
[ ] MSR:
9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR:
44000224 XER:
20040000
[ ] CFAR:
c00000000005eaa0 DAR:
0000000000000000 DSISR:
02080000 IRQMASK: 0
[ ] GPR00:
c00000000005dd98 c0002000073838e0 c00000000185de00 c000200fff018960
[ ] GPR04:
00000000000000fc 0000000000000003 0000000000000000 0000000000000000
[ ] GPR08:
0000000000000000 0000000000000000 0000000000000000 9000000000001033
[ ] GPR12:
0000000031cb0000 c000000ffffe6a80 c000000000010a58 0000000000000000
[ ] GPR16:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ ] GPR20:
0000000000000000 0000000000000000 0000000000000000 c00000000711e200
[ ] GPR24:
0000000000000100 c000200009501120 c00020000cee2800 00000000000003ff
[ ] GPR28:
c000200fff018960 0000000000000000 c000200ffcb7fd00 0000000000000000
[ ] NIP [
c00000000005eac4] pnv_ioda_setup_pe_res+0x94/0x1a0
[ ] LR [
c00000000005ea44] pnv_ioda_setup_pe_res+0x14/0x1a0
[ ] Call Trace:
[ ] [
c0002000073838e0] [
c00000000005eb98] pnv_ioda_setup_pe_res+0x168/0x1a0 (unreliable)
[ ] [
c000200007383970] [
c00000000005dd98] pnv_pci_ioda_dma_dev_setup+0x43c/0x970
[ ] [
c000200007383a60] [
c000000000032cdc] pcibios_bus_add_device+0x78/0x18c
[ ] [
c000200007383aa0] [
c00000000028f2bc] pci_bus_add_device+0x28/0xbc
[ ] [
c000200007383b10] [
c00000000028f3a0] pci_bus_add_devices+0x50/0x7c
[ ] [
c000200007383b50] [
c00000000028f3c4] pci_bus_add_devices+0x74/0x7c
[ ] [
c000200007383b90] [
c00000000028f3c4] pci_bus_add_devices+0x74/0x7c
[ ] [
c000200007383bd0] [
c00000000069ad0c] pcibios_init+0xf0/0x104
[ ] [
c000200007383c50] [
c0000000000106d8] do_one_initcall+0x84/0x1c4
[ ] [
c000200007383d20] [
c0000000006910b8] kernel_init_freeable+0x264/0x268
[ ] [
c000200007383dc0] [
c000000000010a68] kernel_init+0x18/0x138
[ ] [
c000200007383e20] [
c00000000000cbfc] ret_from_kernel_thread+0x5c/0x80
[ ] Instruction dump:
[ ]
7f89e840 409d000c 7fbbf840 409c000c 38210090 4848f448 809c002c e95e0120
[ ]
7ba91764 38a00003 57a7043e 38c00000 <
7c8a492e>
5484043e e87e0018 4bff23bd
Hitting the problem is not that easy. It was seen with a (semi-bogus)
PCI device with a class code of 0. The generic PCI framework doesn't
allocate resources in such a case.
The patch is simply skipping resources which are still flagged with
IORESOURCE_UNSET.
We don't have the problem with 64-bit mem resources, as the address of
the resource is checked to be within the range of the 64-bit mmio
window. See pnv_ioda_reserve_dev_m64_pe() and pnv_pci_is_m64().
Reported-by: Andrew Jeffery <andrew@aj.id.au>
Fixes:
23e79425fe7c ("powerpc/powernv: Simplify pnv_ioda_setup_pe_seg()")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230120093215.19496-1-fbarrat@linux.ibm.com
Nicholas Piggin [Sat, 21 Jan 2023 09:58:05 +0000 (19:58 +1000)]
powerpc/32: select HAVE_VIRT_CPU_ACCOUNTING_GEN
cputime_t is no longer a type, so VIRT_CPU_ACCOUNTING_GEN does not
have any affect on the type for 32-bit architectures, so there is
no reason it can't be supported.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121095805.2823731-4-npiggin@gmail.com
Nicholas Piggin [Sat, 21 Jan 2023 09:58:04 +0000 (19:58 +1000)]
powerpc/32: implement HAVE_CONTEXT_TRACKING_USER support
Context tracking involves tracking user, kernel, guest switches. 32-bit
shares interrupt and syscall entry and exit code (and context tracking
calls) with 64-bit, and KVM can not be selected if CONTEXT_TRACKING_USER
is enabled, so context tracking can be enabled for 32-bit.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121095805.2823731-3-npiggin@gmail.com
Nicholas Piggin [Sat, 21 Jan 2023 09:58:03 +0000 (19:58 +1000)]
powerpc: Consolidate 32-bit and 64-bit interrupt_enter_prepare
There are two separeate implementations for 32-bit and 64-bit which
mostly do the same thing. Consolidating on one implementation ends
up being smaller and simpler, there is just irq soft-mask reconcile
that is specific to 64-bit.
There should be no real functional change with this patch, but it
does make the context tracking calls necessary for 32-bit to support
context tracking.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121095805.2823731-2-npiggin@gmail.com
Kajol Jain [Tue, 31 Jan 2023 18:48:04 +0000 (00:18 +0530)]
powerpc/hv-24x7: Fix pvr check when setting interface version
Commit
ec3eb9d941a9 ("powerpc/perf: Use PVR rather than
oprofile field to determine CPU version") added usage
of pvr value instead of oprofile field to determine the
platform. In hv-24x7 pmu driver code, pvr check uses PVR_POWER8
when assigning the interface version for power8 platform.
But power8 can also have other pvr values like PVR_POWER8E and
PVR_POWER8NVL. Hence the interface version won't be set
properly incase of PVR_POWER8E and PVR_POWER8NVL.
Fix this issue by adding the checks for PVR_POWER8E and
PVR_POWER8NVL as well.
Fixes:
ec3eb9d941a9 ("powerpc/perf: Use PVR rather than oprofile field to determine CPU version")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230131184804.220756-1-kjain@linux.ibm.com
Christophe Leroy [Wed, 1 Feb 2023 10:04:31 +0000 (11:04 +0100)]
powerpc/bpf/32: perform three operands ALU operations
When an ALU instruction is preceded by a MOV instruction
that just moves a source register into the destination register of
the ALU, replace that MOV+ALU instructions by an ALU operation
taking the source of the MOV as second source instead of using its
destination.
Before the change, code could look like the following, with
superfluous separate register move (mr) instructions.
70: 7f c6 f3 78 mr r6,r30
74: 7f a5 eb 78 mr r5,r29
78: 30 c6 ff f4 addic r6,r6,-12
7c: 7c a5 01 d4 addme r5,r5
With this commit, addition instructions take r30 and r29 directly.
70: 30 de ff f4 addic r6,r30,-12
74: 7c bd 01 d4 addme r5,r29
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b6719beaf01f9dcbcdbb787ef67c4a2f8e3a4cb6.1675245773.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 1 Feb 2023 10:04:30 +0000 (11:04 +0100)]
powerpc/bpf/32: introduce a second source register for ALU operations
At the time being, all ALU operation are performed with same L-source
and destination, requiring the L-source to be moved into destination via
a separate register move, like:
70: 7f c6 f3 78 mr r6,r30
74: 7f a5 eb 78 mr r5,r29
78: 30 c6 ff f4 addic r6,r6,-12
7c: 7c a5 01 d4 addme r5,r5
Introduce a second source register to all ALU operations. For the time
being that second source register is made equal to the destination
register.
That change will allow, via following patch, to optimise the generated
code as:
70: 30 de ff f4 addic r6,r30,-12
74: 7c bd 01 d4 addme r5,r29
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d5aaaba50d9d6b4a0e9f0cd4a5e34101aca1e247.1675245773.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 1 Feb 2023 10:04:29 +0000 (11:04 +0100)]
powerpc/bpf/32: Optimise some particular const operations
Simplify multiplications and divisions with constants when the
constant is 1 or -1.
When the constant is a power of 2, replace them by bit shits.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e53b1f4a4150ec6cabcaeeef82bf9c361b5f9204.1675245773.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 1 Feb 2023 10:04:28 +0000 (11:04 +0100)]
powerpc/bpf: Only pad length-variable code at initial pass
Now that two real additional passes are performed in case of extra pass
requested by BPF core, padding is not needed anymore except during
initial pass done before memory allocation to count maximum possible
program size.
So, only do the padding when 'image' is NULL.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/921851d6577badc1e6b08b270a0ced80a6a26d03.1675245773.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 1 Feb 2023 10:04:27 +0000 (11:04 +0100)]
powerpc/bpf: Perform complete extra passes to update addresses
BPF core calls the jit compiler again for an extra pass in order
to properly set subprog addresses.
Unlike other architectures, powerpc only updates the addresses
during that extra pass. It means that holes must have been left
in the code in order to enable the maximum possible instruction
size.
In order to avoid waste of space, and waste of CPU time on powerpc
processors on which the NOP instruction is not 0-cycle, perform
two real additional passes.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d484a4ac95949ff55fc4344b674e7c0d3ddbfcd5.1675245773.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 1 Feb 2023 10:04:26 +0000 (11:04 +0100)]
powerpc/bpf/32: BPF prog is never called with more than one arg
BPF progs are never called with more than one argument, plus the
tail call count as a second argument when needed.
So, no need to retrieve 9th and 10th argument (5th 64 bits argument)
from the stack in prologue.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/89a200fb45048601475c092c5775294dee3886de.1675245773.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 1 Feb 2023 10:04:25 +0000 (11:04 +0100)]
powerpc/bpf/32: Only set a stack frame when necessary
Until now a stack frame was set at all time due to the need
to keep tail call counter in the stack.
But since commit
89d21e259a94 ("powerpc/bpf/32: Fix Oops on tail call
tests") the tail call counter is passed via register r4. It is therefore
not necessary anymore to have a stack frame for that.
Just like PPC64, implement bpf_has_stack_frame() and only sets the frame
when needed.
The difference with PPC64 is that PPC32 doesn't have a redzone, so
the stack is required as soon as non volatile registers are used or
when tail call count is set up.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix commit reference in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/62d7b654a3cfe73d998697cb29bbc5ffd89bfdb1.1675245773.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 1 Feb 2023 10:04:24 +0000 (11:04 +0100)]
powerpc/bpf/32: No need to zeroise r4 when not doing tail call
r4 is cleared at function entry and used as tail call count.
But when the function does not perform tail call, r4 is
ignored, so no need to clear it.
Replace it by a NOP in that case.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9c5440b2b6d90a78600257433ac499b5c5101fbb.1675245773.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 1 Feb 2023 10:04:23 +0000 (11:04 +0100)]
powerpc: Remove __kernel_text_address() in show_instructions()
That test was introducted in 2006 by
commit
00ae36de49cc ("[POWERPC] Better check in show_instructions").
At that time, there was no BPF progs.
As seen in message of commit
89d21e259a94 ("powerpc/bpf/32: Fix Oops
on tail call tests"), when a page fault occurs in test_bpf.ko for
instance, the code is dumped as XXXXXXXXs. Allthough
__kernel_text_address() checks is_bpf_text_address(), it seems it is
not enough.
Today, show_instructions() uses get_kernel_nofault() to read the code,
so there is no real need for additional verifications.
ARM64 and x86 don't do any additional check before dumping
instructions. Do the same and remove __kernel_text_address()
in show_instructions().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4fd69ef7945518c3e27f96b95046a5c1468d35bf.1675245773.git.christophe.leroy@csgroup.eu
Ganesh Goudar [Wed, 1 Feb 2023 09:59:33 +0000 (15:29 +0530)]
powerpc/mce: log the error for all unrecoverable errors
For all unrecoverable errors we are missing to log the
error, Since machine_check_log_err() is not getting called
for unrecoverable errors. machine_check_log_err() is called
from deferred handler, To run deferred handlers we have to do
irq work raise from the exception handler.
For recoverable errors exception vector code takes care of
running deferred handlers.
For unrecoverable errors raise irq work in save_mce_event(),
So that we log the error from MCE deferred handler.
Log without this change
MCE: CPU27: machine check (Severe) Real address Load/Store (foreign/control memory) [Not recovered]
MCE: CPU27: PID: 10580 Comm: inject-ra-err NIP: [
0000000010000df4]
MCE: CPU27: Initiator CPU
MCE: CPU27: Unknown
Log with this change
MCE: CPU24: machine check (Severe) Real address Load/Store (foreign/control memory) [Not recovered]
MCE: CPU24: PID:
1589811 Comm: inject-ra-err NIP: [
0000000010000e48]
MCE: CPU24: Initiator CPU
MCE: CPU24: Unknown
RTAS: event: 5, Type: Platform Error (224), Severity: 3
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230201095933.129482-1-ganeshgr@linux.ibm.com
Benjamin Gray [Fri, 3 Feb 2023 00:39:47 +0000 (11:39 +1100)]
selftests/powerpc: Add automatically allocating read_file
A couple of tests roll their own auto-allocating file read logic.
Add a generic implementation and convert them to use it.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203003947.38033-6-bgray@linux.ibm.com
Benjamin Gray [Fri, 3 Feb 2023 00:39:46 +0000 (11:39 +1100)]
selftests/powerpc: Add {read,write}_{long,ulong}
Add helper functions to read and write (unsigned) long values directly
from/to files. One of the kernel interfaces uses hex strings, so we need
to allow passing a base too.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203003947.38033-5-bgray@linux.ibm.com
Benjamin Gray [Fri, 3 Feb 2023 00:39:45 +0000 (11:39 +1100)]
selftests/powerpc: Parse long/unsigned long value safely
Often a file is expected to hold an integral value. Existing functions
will use a C stdlib function like atoi or strtol to parse the file.
These operations are error prone, with complicated error conditions
(atoi returns 0 if not a number, and is undefined behaviour if not in
range. strtol returns 0 if not a number, and LONG_MIN/MAX if not in
range + sets errno to ERANGE).
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203003947.38033-4-bgray@linux.ibm.com
Benjamin Gray [Fri, 3 Feb 2023 00:39:44 +0000 (11:39 +1100)]
selftests/powerpc: Add read/write debugfs file, int
Debugfs files are not always integers, so make *_file return/write a
byte buffer, and *_int deal with int values specifically. This increases
consistency with the other file read/write helpers.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203003947.38033-3-bgray@linux.ibm.com
Benjamin Gray [Fri, 3 Feb 2023 00:39:43 +0000 (11:39 +1100)]
selftests/powerpc: Add generic read/write file util
File read/write is reimplemented in about 5 different ways in the
various PowerPC selftests. This indicates it should be a common util.
Add a common read_file / write_file implementation and convert users
to it where (easily) possible.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203003947.38033-2-bgray@linux.ibm.com
Greg Kroah-Hartman [Thu, 2 Feb 2023 14:19:19 +0000 (15:19 +0100)]
powerpc/iommu: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230202141919.2298821-1-gregkh@linuxfoundation.org
Nicholas Piggin [Fri, 3 Feb 2023 11:17:18 +0000 (21:17 +1000)]
powerpc/64s/radix: Remove TLB_FLUSH_ALL test from range flushes
This looks like it came across from x86, but x86 uses TLB_FLUSH_ALL as
a parameter to internal functions. Powerpc never sets it anywhere.
Remove the associated logic and leave a warning for now.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203111718.1149852-4-npiggin@gmail.com
Nicholas Piggin [Fri, 3 Feb 2023 11:17:17 +0000 (21:17 +1000)]
powerpc/64s/radix: mm->context.id should always be valid
The MMU_NO_CONTEXT checks are an unnecessary complication. Make
these warn to prepare to remove them in future.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203111718.1149852-3-npiggin@gmail.com
Nicholas Piggin [Fri, 3 Feb 2023 11:17:16 +0000 (21:17 +1000)]
powerpc/64s/radix: Remove need_flush_all test from radix__tlb_flush
need_flush_all is only set by arch code to instruct generic tlb_flush
to flush all. It is never set by powerpc, so it can be removed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230203111718.1149852-2-npiggin@gmail.com