target/mips: Extract the microMIPS ISA translation routines

Extract 3200+ lines from the huge translate.c to a new file,
'micromips_translate.c.inc'. As there are too many inter-
dependencies we don't compile it as another object, but
keep including it in the big translate.o. We gain in code
maintainability.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201120210844.2625602-12-f4bug@amsat.org>

target/mips: Extract Code Compaction ASE translation routines

Extract 1100+ lines from the huge translate.c to a new file,
'mips16e_translate.c.inc'. As there are too many inter-
dependencies we don't compile it as another object, but
keep including it in the big translate.o. We gain in code
maintainability.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201120210844.2625602-10-f4bug@amsat.org>

target/mips: Add declarations for generic TCG helpers

We want to extract the microMIPS ISA and Code Compaction ASE to
new compilation units.

We will first extract this code as included source files (.c.inc),
then make them new compilation units afterward.

The following methods are going to be used externally:

  micromips_translate.c.inc:1778:   gen_ldxs(ctx, rs, rt, rd);
  micromips_translate.c.inc:1806:   gen_align(ctx, 32, rd, rs, ...
  micromips_translate.c.inc:2859:   gen_addiupc(ctx, reg, offset, ...
  mips16e_translate.c.inc:444:      gen_addiupc(ctx, ry, offset, ...

To avoid too much code churn, it is simpler to declare these
prototypes in "translate.h" now.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174907.2904067-2-f4bug@amsat.org>

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210629' into staging

TranslatorOps conversion for target/avr
TranslatorOps conversion for target/cris
TranslatorOps conversion for target/nios2
Simple vector operations on TCGv_i32
Host signal fixes for *BSD
Improvements to tcg bswap operations

# gpg: Signature made Tue 29 Jun 2021 19:51:03 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20210629: (63 commits)
  tcg/riscv: Remove MO_BSWAP handling
  tcg/aarch64: Unset TCG_TARGET_HAS_MEMORY_BSWAP
  tcg/arm: Unset TCG_TARGET_HAS_MEMORY_BSWAP
  target/mips: Fix gen_mxu_s32ldd_s32lddr
  target/sh4: Improve swap.b translation
  target/i386: Improve bswap translation
  target/arm: Improve REVSH
  target/arm: Improve vector REV
  target/arm: Improve REV32
  tcg: Make use of bswap flags in tcg_gen_qemu_st_*
  tcg: Make use of bswap flags in tcg_gen_qemu_ld_*
  tcg: Add flags argument to tcg_gen_bswap16_*, tcg_gen_bswap32_i64
  tcg: Handle new bswap flags during optimize
  tcg/tci: Support bswap flags
  tcg/mips: Support bswap flags in tcg_out_bswap32
  tcg/mips: Support bswap flags in tcg_out_bswap16
  tcg/s390: Support bswap flags
  tcg/ppc: Use power10 byte-reverse instructions
  tcg/ppc: Support bswap flags
  tcg/ppc: Split out tcg_out_bswap64
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/jsnow-gitlab/tags/python-pull-request' into staging

Pull request

Patch 01/15 fixes the check-python-tox test.

# gpg: Signature made Thu 01 Jul 2021 03:01:20 BST
# gpg:                using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jsnow-gitlab/tags/python-pull-request:
  python: Fix broken ReST docstrings
  python: remove auto-generated pyproject.toml file
  python: Update help text on 'make clean', 'make distclean'
  python: Update help text on 'make check', 'make develop'
  python: add 'make check-dev' invocation
  python: only check qemu/ subdir with flake8
  python: Fix .PHONY Make specifiers
  python: update help text for check-tox
  python: rename 'venv-check' target to 'check-pipenv'
  python: Add no-install usage instructions
  python: README.rst touchups
  python: Re-lock pipenv at *oldest* supported versions
  python: Remove global pylint suppressions
  python: expose typing information via PEP 561
  python/qom: Do not use 'err' name at module scope

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

python: Fix broken ReST docstrings

This patch *doesn't* update all of the docstring standards across the
QEMU package directory to make our docstring usage consistent. It
*doesn't* fix the formatting to make it look pretty or reasonable in
generated output. It *does* fix a few small instances where Sphinx would
emit a build warning because of malformed ReST -- If we built our Python
docs with Sphinx.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: remove auto-generated pyproject.toml file

For reasons that at-present escape me, pipenv insists on creating a stub
pyproject.toml file. This file is a nuisance, because its mere presence
changes the behavior of various tools.

For instance, this stub file will cause "pip install --user -e ." to
fail in spectacular fashion with misleading errors. "pip install -e ."
works okay, but for some reason pip does not support editable installs
to the user directory when using PEP517.

References:
  https://github.com/pypa/pip/pull/9990
  https://github.com/pypa/pip/issues/7953

As outlined in ea1213b7ccc, it is still too early for us to consider
moving to a PEP-517 exclusive package. We must support older
distributions, so squash the annoyance for now. (Python 3.6 shipped Dec
2016, PEP517 support showed up in pip sometime in 2019 or so.)

Add 'pyproject.toml' to the 'make clean' target, and also delete it
after every pipenv invocation issued by the Makefile.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-15-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: Update help text on 'make clean', 'make distclean'

Update for visual parity with all the remaining targets.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-14-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: Update help text on 'make check', 'make develop'

Update for visual parity with the other targets.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: add 'make check-dev' invocation

This is a *third* way to run the Python tests. Unlike the first two
(check-pipenv, check-tox), this version does not require any specific
interpreter version -- making it a lot easier to tell people to run it
as a quick smoketest prior to submission to GitLab CI.

Summary:

  Checked via GitLab CI:
    - check-pipenv: tests our oldest python & dependencies
    - check-tox: tests newest dependencies on all non-EOL python versions
  Executed only incidentally:
    - check-dev: tests newest dependencies on whichever python version

('make check' does not set up any environment at all, it just runs the
tests in your current environment. All four invocations perform the
exact same tests, just in different execution environments.)

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-12-jsnow@redhat.com
[Maintainer edit: added .dev-venv/ to .gitignore. --js]
Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>

python: only check qemu/ subdir with flake8

flake8 is a little eager to check everything it can. Limit it to
checking inside the qemu namespace directory only. Update setup.cfg now
that the exclude patterns are no longer necessary.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: Fix .PHONY Make specifiers

I missed the 'check-tox' target. Add that, but split the large .PHONY
specifier at the top into its component pieces and move them near the
targets they describe so that they're much harder to forget to update.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210629214323.1329806-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: update help text for check-tox

Move it up near the check-pipenv help text, and update it to suggest parity.

(At the time I first added it, I wasn't sure if I would be keeping it,
but I've come to appreciate it as it has actually helped uncover bugs I
would not have noticed without it. It should stay.)

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: rename 'venv-check' target to 'check-pipenv'

Well, Cleber was right, this is a better name.

In preparation for adding a different kind of virtual environment check
(One that simply uses whichever version of Python you happen to have),
rename this test 'check-pipenv' so that it matches the CI job
'check-python-pipenv'.

Remove the "If you don't know which test to run" hint, because it's not
actually likely you have Python 3.6 installed to be able to run the
test. It's still the test I'd most prefer you to run, but it's not the
test you are most likely to be able to run.

Rename the 'venv' target to 'pipenv' as well, and move the more
pertinent help text under the 'check-pipenv' target.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: Add no-install usage instructions

It's not encouraged, but it's legitimate to want to know how to do.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: README.rst touchups

Clarifying a few points; removing the reference to 'setuptools' because
it isn't referenced anywhere else in this document and doesn't really
provide any useful information to a Python newcomer.

Adjusting the language elsewhere to be less ambiguous and have fewer
run-on sentences.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: Re-lock pipenv at *oldest* supported versions

tox is already testing the most recent versions. Let's use pipenv to
test the oldest versions we claim to support. This matches the stylistic
choice to have pipenv always test our oldest supported Python version, 3.6.

The effect of this is that the python-check-pipenv CI job on gitlab will
now test against much older versions of these linters, which will help
highlight incompatible changes that might otherwise go unnoticed.

Update instructions for adding and bumping versions in setup.cfg. The
reason for deleting the line that gets added to Pipfile is largely just
to avoid having the version minimums specified in multiple places in
config checked into the tree.

(This patch was written by deleting Pipfile and Pipfile.lock, then
explicitly installing each dependency manually at a specific
version. Then, I restored the prior Pipfile and re-ran `pipenv lock
--dev --keep-outdated` to re-add the qemu dependency back to the pipenv
environment while keeping the "old" packages. It's annoying, yes, but I
think the improvement to test coverage is worthwhile.)

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: Remove global pylint suppressions

These suppressions only apply to a small handful of places. Instead of
disabling them globally, disable them just in the cases where we
need. The design of the machine class grew quite organically with tons
of constructor and class instance variables -- there's little chance of
meaningfully refactoring it in the near term, so just suppress the
warnings for that class.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python: expose typing information via PEP 561

https://www.python.org/dev/peps/pep-0561/#specification

Create 'py.typed' files in each subpackage that indicate to mypy that
this is a typed module, so that users of any of these packages can use
mypy to check their code as well.

Note: Theoretically it's possible to ditch MANIFEST.in in favor of using
package_data in setup.cfg, but I genuinely could not figure out how to
get it to include things from the *source root* into the *package root*;
only how to include things from each subpackage. I tried!

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

python/qom: Do not use 'err' name at module scope

Pylint updated to 2.9.0 upstream, adding new warnings for things that
re-use the 'err' variable. Luckily, this only breaks the
python-check-tox job, which is allowed to fail as a warning.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210629214323.1329806-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>

Merge remote-tracking branch 'remotes/nvme/tags/nvme-next-pull-request' into staging

hw/nvme patches

* namespace eui64 support (Heinrich)
* aiocb refactoring (Klaus)
* controller parameter for auto zone transitioning (Niklas)
* misc fixes and additions (Gollu, Klaus, Keith)

# gpg: Signature made Tue 29 Jun 2021 19:46:55 BST
# gpg:                using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown]
# gpg:                 aka "Klaus Jensen <k.jensen@samsung.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468  4272 63D5 6FC5 E55D A838
#      Subkey fingerprint: 5228 33AA 75E2 DCE6 A247  66C0 4DE1 AF31 6D4F 0DE9

* remotes/nvme/tags/nvme-next-pull-request: (23 commits)
  hw/nvme: add 'zoned.zasl' to documentation
  hw/nvme: fix pin-based interrupt behavior (again)
  hw/nvme: fix missing check for PMR capability
  hw/nvme: documentation fix
  hw/nvme: fix endianess conversion and add controller list
  Partially revert "hw/block/nvme: drain namespaces on sq deletion"
  hw/nvme: reimplement format nvm to allow cancellation
  hw/nvme: reimplement zone reset to allow cancellation
  hw/nvme: reimplement the copy command to allow aio cancellation
  hw/nvme: add dw0/1 to the req completion trace event
  hw/nvme: use prinfo directly in nvme_check_prinfo and nvme_dif_check
  hw/nvme: remove assert from nvme_get_zone_by_slba
  hw/nvme: save reftag when generating pi
  hw/nvme: reimplement dsm to allow cancellation
  hw/nvme: add nvme_block_status_all helper
  hw/nvme: reimplement flush to allow cancellation
  hw/nvme: default for namespace EUI-64
  hw/nvme: namespace parameter for EUI-64
  hw/nvme: fix csi field for cns 0x00 and 0x11
  hw/nvme: add param to control auto zone transitioning to zone state closed
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/quic/tags/pull-hex-20210629' into staging

Fixes for bugs found by inspection and internal testing
Tests added to tests/tcg/hexagon/misc.c

# gpg: Signature made Tue 29 Jun 2021 17:50:16 BST
# gpg:                using RSA key 7B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5  9AB4 7B02 44FB 12DE 4422

* remotes/quic/tags/pull-hex-20210629:
  Hexagon (target/hexagon) remove unused TCG variables
  Hexagon (target/hexagon) cleanup gen_store_conditional[48] functions
  Hexagon (target/hexagon) fix l2fetch instructions
  Hexagon (target/hexagon) fix bug in fLSBNEW*

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/nvme: add 'zoned.zasl' to documentation

Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

tcg/riscv: Remove MO_BSWAP handling

TCG_TARGET_HAS_MEMORY_BSWAP is already unset for this backend,
which means that MO_BSWAP be handled by the middle-end and
will never be seen by the backend.  Thus the indexes used with
qemu_{ld,st}_helpers will always be zero.

Tidy the comments and asserts in tcg_out_qemu_{ld,st}_direct.
It is not that we do not handle bswap "yet", but never will.

Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/aarch64: Unset TCG_TARGET_HAS_MEMORY_BSWAP

The memory bswap support in the aarch64 backend merely dates from
a time when it was required.  There is nothing special about the
backend support that could not have been provided by the middle-end
even prior to the introduction of the bswap flags.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/arm: Unset TCG_TARGET_HAS_MEMORY_BSWAP

Now that the middle-end can replicate the same tricks as tcg/arm
used for optimizing bswap for signed loads and for stores, do not
pretend to have these memory ops in the backend.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/mips: Fix gen_mxu_s32ldd_s32lddr

There were two bugs here: (1) the required endianness was
not present in the MemOp, and (2) we were not providing a
zero-extended input to the bswap as semantics required.

The best fix is to fold the bswap into the memory operation,
producing the desired result directly.

Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/sh4: Improve swap.b translation

Remove TCG_BSWAP_IZ and the preceding zero-extension.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/i386: Improve bswap translation

Use a break instead of an ifdefed else.
There's no need to move the values through s->T0.
Remove TCG_BSWAP_IZ and the preceding zero-extension.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Improve REVSH

The new bswap flags can implement the semantics exactly.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Improve vector REV

We can eliminate the requirement for a zero-extended output,
because the following store will ignore any garbage high bits.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/arm: Improve REV32

For the sf version, we are performing two 32-bit bswaps
in either half of the register.  This is equivalent to
performing one 64-bit bswap followed by a rotate.

For the non-sf version, we can remove TCG_BSWAP_IZ
and the preceding zero-extension.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Make use of bswap flags in tcg_gen_qemu_st_*

By removing TCG_BSWAP_IZ we indicate that the input is
not zero-extended, and thus can remove an explicit extend.
By removing TCG_BSWAP_OZ, we allow the implementation to
leave high bits set, which will be ignored by the store.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Make use of bswap flags in tcg_gen_qemu_ld_*

We can perform any required sign-extension via TCG_BSWAP_OS.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add flags argument to tcg_gen_bswap16_*, tcg_gen_bswap32_i64

Implement the new semantics in the fallback expansion.
Change all callers to supply the flags that keep the
semantics unchanged locally.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Handle new bswap flags during optimize

Notice when the input is known to be zero-extended and force
the TCG_BSWAP_IZ flag on.  Honor the TCG_BSWAP_OS bit during
constant folding.  Propagate the input to the output mask.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: Support bswap flags

The existing interpreter zero-extends, ignoring high bits.
Simply add a separate sign-extension opcode if required.
Ensure that the interpreter supports ext16s when bswap16 is enabled.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/mips: Support bswap flags in tcg_out_bswap32

Merge tcg_out_bswap32 and tcg_out_bswap32s.
Use the flags in the internal uses for loads and stores.

For mips32r2 bswap32 with zero-extension, standardize on
WSBH+ROTR+DEXT.  This is the same number of insns as the
previous DSBH+DSHD+DSRL but fits in better with the flags check.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/mips: Support bswap flags in tcg_out_bswap16

Merge tcg_out_bswap16 and tcg_out_bswap16s.  Use the flags
in the internal uses for loads and stores.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/s390: Support bswap flags

For INDEX_op_bswap16_i64, use 64-bit instructions so that we can
easily provide the extension to 64-bits.  Drop the special case,
previously used, where the input is already zero-extended -- the
minor code size savings is not worth the complication.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/ppc: Use power10 byte-reverse instructions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/ppc: Support bswap flags

For INDEX_op_bswap32_i32, pass 0 for flags: input not zero-extended,
output does not need extension within the host 64-bit register.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/ppc: Split out tcg_out_bswap64

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/ppc: Split out tcg_out_bswap32

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/ppc: Split out tcg_out_bswap16

With the use of a suitable temporary, we can use the same
algorithm when src overlaps dst.  The result is the same
number of instructions either way.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/ppc: Split out tcg_out_sari{32,64}

We will shortly require sari in other context;
split out both for cleanliness sake.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/ppc: Split out tcg_out_ext{8,16,32}s

We will shortly require these in other context;
make the expansion as clear as possible.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/arm: Support bswap flags

Combine the three bswap16 routines, and differentiate via the flags.
Use the correct flags combination from the load/store routines, and
pass along the constant parameter from tcg_out_op.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/aarch64: Support bswap flags

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/aarch64: Merge tcg_out_rev{16,32,64}

Pass in the input and output size.  We currently use 3 of the 5
possible combinations; the others may be used by new tcg opcodes.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/i386: Support bswap flags

Retain the current rorw bswap16 expansion for the zero-in/zero-out case.
Otherwise, perform a wider bswap plus a right-shift or extend.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add flags argument to bswap opcodes

This will eventually simplify front-end usage, and will allow
backends to unset TCG_TARGET_HAS_MEMORY_BSWAP without loss of
optimization.

The argument is added during expansion, not currently exposed to the
front end translators.  The backends currently only support a flags
value of either TCG_BSWAP_IZ, or (TCG_BSWAP_IZ | TCG_BSWAP_OZ),
since they all require zero top bytes and leave them that way.
At the existing call sites we pass in (TCG_BSWAP_IZ | TCG_BSWAP_OZ),
except for the flags-ignored cases of a 32-bit swap of a 32-bit
value and or a 64-bit swap of a 64-bit value, where we pass 0.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Use correct trap number for page faults on *BSD systems

The trap number for a page fault on BSD systems is T_PAGEFLT
not 0xe -- 0xe is used by Linux and represents the intel hardware
trap vector. The BSD kernels, however, translate this to T_PAGEFLT
in their Xpage, Xtrap0e, Xtrap14, etc fault handlers. This is true
for i386 and x86_64, though the name of the trap hanlder can very
on the flavor of BSD. As far as I can tell, Linux doesn't provide
a define for this value. Invent a new one (PAGE_FAULT_TRAP) and
use it instead to avoid uglier ifdefs.

Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Signed-off-by: Juergen Lock <nox@FreeBSD.org>
[ Rework to avoid ifdefs and expand it to i386 ]
Signed-off-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20210625045707.84534-3-imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Implement tcg_gen_vec_add{sub}32_tl

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Message-Id: <20210624105023.3852-6-zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add tcg_gen_vec_shl{shr}{sar}8i_i32

Implement tcg_gen_vec_shl{shr}{sar}8i_tl by adding corresponging i32 OP.

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Message-Id: <20210624105023.3852-5-zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add tcg_gen_vec_shl{shr}{sar}16i_i32

Implement tcg_gen_vec_shl{shr}{sar}16i_tl by adding corresponging i32 OP.

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Message-Id: <20210624105023.3852-4-zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add tcg_gen_vec_add{sub}8_i32

Implement tcg_gen_vec_add{sub}8_tl by adding corresponging i32 OP.

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Message-Id: <20210624105023.3852-3-zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add tcg_gen_vec_add{sub}16_i32

Implement tcg_gen_vec_add{sub}16_tl by adding corresponding i32 OP.

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Message-Id: <20210624105023.3852-2-zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Do not exit tb for X_FLAG changes

We always know the exact value of X, that's all that matters.
This avoids splitting the TB e.g. between "ax" and "addq".

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Remove dc->flagx_known

Ever since 2a44f7f17364, flagx_known is always true.
Fold away all of the tests against the flag.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Improve JMP_INDIRECT

Use movcond instead of brcond to set env_pc.
Discard the btarget and btaken variables to improve
register allocation and avoid unnecessary writeback.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Use tcg_gen_lookup_and_goto_ptr

We can use this in gen_goto_tb and for DISAS_JUMP
to indirectly chain to the next TB.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Add DISAS_DBRANCH

Move delayed branch handling to tb_stop, where we can re-use other
end-of-tb code, e.g. the evaluation of flags.  Honor single stepping.
Validate that we aren't losing state by overwriting is_jmp.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Add DISAS_UPDATE_NEXT

Move this pc update into tb_stop.
We will be able to re-use this code shortly.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Set cpustate_changed for rfe/rfn

These insns set DISAS_UPDATE without cpustate_changed,
which isn't quite right.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Fold unhandled X_FLAG changes into cpustate_changed

We really do this already, by including them into the same test.
This just hoists the expression up a bit.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Mark static arrays const

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Mark helper_raise_exception noreturn

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Convert to TranslatorOps

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Fix use_goto_tb

Do not skip the page check for user-only -- mmap/mprotect can
still change page mappings.  Only check dc->base.pc_first, not
dc->ppc -- the start page is the only one that's relevant.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Mark exceptions as DISAS_NORETURN

After we've raised the exception, we have left the TB.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Replace DISAS_TB_JUMP with DISAS_NORETURN

The only semantic of DISAS_TB_JUMP is that we've done goto_tb,
which is the same as DISAS_NORETURN -- we've exited the tb.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Remove DISAS_SWI

This value is unused.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/cris: Add DisasContextBase to DisasContext

Migrate the is_jmp, tb and singlestep_enabled fields
from DisasContext into the base.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/avr: Convert to TranslatorOps

Tested-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/avr: Change ctx to DisasContext* in gen_intermediate_code

Prepare for receiving it as a pointer input.

Tested-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/avr: Add DisasContextBase to DisasContext

Migrate the bstate, tb and singlestep_enabled fields
from DisasContext into the base.

Tested-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/nios2: Use pc_next for pc + 4

We have pre-computed the next instruction address into
dc->base.pc_next, so we might as well use it.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/nios2: Inline handle_instruction

Move handle_instruction into nios2_tr_translate_insn
as the only caller.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/nios2: Clean up goto in handle_instruction

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/nios2: Remove assignment to env in handle_instruction

Direct assignments to env during translation do not work.

As it happens, the only way we can get here is if env->pc
is already set to dc->pc.  We will trap on the first insn
we execute anywhere on the page.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/nios2: Convert to TranslatorOps

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/nios2: Add DisasContextBase to DisasContext

Migrate the is_jmp, tb and singlestep_enabled fields from
DisasContext into the base.  Use pc_first instead of tb->pc.
Increment pc_next prior to decode, leaving the address of
the current insn in dc->pc.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/nios2: Use global cpu_R

We do not need to copy this into DisasContext.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/nios2: Use global cpu_env

We do not need to copy this into DisasContext.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/nios2: Replace DISAS_TB_JUMP with DISAS_NORETURN

The only semantic of DISAS_TB_JUMP is that we've done goto_tb,
which is the same as DISAS_NORETURN -- we've exited the tb.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Hexagon (target/hexagon) remove unused TCG variables

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-5-git-send-email-tsimpson@quicinc.com>

Hexagon (target/hexagon) cleanup gen_store_conditional[48] functions

Previously the store-conditional code was writing to hex_pred[prednum].
Then, the fGEN_TCG override was reading from there to the destination
variable so that the packet commit logic would handle it properly.

The correct implementation is to write to the destination variable
and don't have the extra read in the override.

Remove the unused arguments from gen_store_conditional[48]

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-4-git-send-email-tsimpson@quicinc.com>

Hexagon (target/hexagon) fix l2fetch instructions

Y4_l2fetch == l2fetch(Rs32, Rt32)
Y5_l2fetch == l2fetch(Rs32, Rtt32)

The semantics for these instructions are present, but the encodings
are missing.

Note that these are treated as nops in qemu, so we add overrides.

Test case added to tests/tcg/hexagon/misc.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-3-git-send-email-tsimpson@quicinc.com>

Hexagon (target/hexagon) fix bug in fLSBNEW*

Change fLSBNEW/fLSBNEW0/fLSBNEW1 from copy to "x & 1"
Remove gen_logical_not function
Clean up fLSBNEWNOT to use andi-1 followed by xori-1

Test cases added to tests/tcg/hexagon/misc.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1622589584-22571-2-git-send-email-tsimpson@quicinc.com>

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-axp-20210628' into staging

Fixes for NetBSD/alpha:
  - Provide a proper PCI-ISA bridge
  - Set PCI device IDs correctly
  - Pass -nographic flag to PALcode
  - Update PALcode to set up the Console Terminal Block
  - Honor the Floating-point ENable bit during translate.

# gpg: Signature made Mon 28 Jun 2021 15:34:08 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-axp-20210628:
  target/alpha: Honor the FEN bit
  pc-bios: Update the palcode-clipper image
  hw/alpha: Provide a PCI-ISA bridge device node
  hw/alpha: Provide console information to the PALcode at start-up
  hw/alpha: Set minimum PCI device ID to 1 to match Clipper IRQ mappings

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/nvme: fix pin-based interrupt behavior (again)

Jakub noticed[1] that, when using pin-based interrupts, the device will
unconditionally deasssert when any CQEs are acknowledged. However, the
pin should not be deasserted if other completion queues still holds
unacknowledged CQEs.

The bug is an artifact of commit ca247d35098d ("hw/block/nvme: fix
pin-based interrupt behavior") which fixed one bug but introduced
another. This is the third time someone tries to fix pin-based
interrupts (see commit 5e9aa92eb1a5 ("hw/block: Fix pin-based interrupt
behaviour of NVMe"))...

Third time's the charm, so fix it, again, by keeping track of how many
CQs have unacknowledged CQEs and only deassert when all are cleared.

  [1]: <20210610114624.304681-1-jakub.jermar@kernkonzept.com>

Cc: qemu-stable@nongnu.org
Fixes: ca247d35098d ("hw/block/nvme: fix pin-based interrupt behavior")
Reported-by: Jakub Jermář <jakub.jermar@kernkonzept.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>

hw/nvme: fix missing check for PMR capability

Qiang Liu reported that an access on an unknown address is triggered in
memory_region_set_enabled because a check on CAP.PMRS is missing for the
PMRCTL register write when no PMR is configured.

Cc: qemu-stable@nongnu.org
Fixes: 75c3c9de961d ("hw/block/nvme: disable PMR at boot up")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/362
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>

hw/nvme: documentation fix

In the documentation of the '-detached' param "be" and "not" has been
used side by side, fix that.

Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

hw/nvme: fix endianess conversion and add controller list

Add the controller identifiers list CNS 0x13, available list of ctrls
in NVM Subsystem that may or may not be attached to namespaces.

In Identify Ctrl List of the CNS 0x12 and 0x13 no endian conversion
for the nsid field.

These two CNS values shows affect when there exists a Subsystem.
Added condition if there is no Subsystem return invalid field in
command.

Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>

Partially revert "hw/block/nvme: drain namespaces on sq deletion"

This partially reverts commit 98f84f5a4eca5c03e32fff20f246d9b4b96d6422.

Since all "multi aio" commands are now reimplemented to properly track
the nested aiocbs, we can revert the "hack" that was introduced to make
sure all requests we're properly drained upon sq deletion.

The revert is partial since we keep the assert that no outstanding
requests remain on the submission queue after the explicit cancellation.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>

hw/nvme: reimplement format nvm to allow cancellation

Prior to this patch, the aios associated with broadcast format are
submitted anonymously (no aiocb reference saved from the blk_aio call).

Fix this by formatting the namespaces one after another, saving a
reference to the aiocb for each.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>

hw/nvme: reimplement zone reset to allow cancellation

Prior to this patch, the aios associated with zone reset are submitted
anonymously (no reference saved to the aiocb from the blk_aio call).

Fix this by resetting the zones one after another, saving a reference to
the aiocb for each reset.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>

hw/nvme: reimplement the copy command to allow aio cancellation

Before this patch the code would issue several aios simultaneously
without saving a reference to the aiocb. Without the aiocb reference the
individual copies cannot be canceled.

Fix this by issuing copies of the ranges one after another.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>

hw/nvme: add dw0/1 to the req completion trace event

Some commands report additional useful information in dw0 and dw1 of the
completion queue entry.

Add them to the trace.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>