OSDN Git Service
Bjorn Andersson [Fri, 25 Jan 2019 18:14:22 +0000 (10:14 -0800)]
arm64: dts: qcom: qcs404: Add rpmcc node
Add the rpm clock controller node, to provide the low-noise baseband
clock for the USB PHYs, among other things.
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Marc Gonzalez [Wed, 30 Jan 2019 16:24:10 +0000 (17:24 +0100)]
arm64: dts: qcom: msm8998: Add rpmcc node
Add MSM8998 Resource Power Manager Clock Controller DT node.
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Jeffrey Hugo [Mon, 21 Jan 2019 21:33:28 +0000 (14:33 -0700)]
arm64: dts: qcom: msm8998: Add USB-related nodes
Add nodes for USB and related PHYs.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Bjorn Andersson [Sun, 18 Nov 2018 20:01:35 +0000 (12:01 -0800)]
arm64: dts: qcom: qcs404: Add QUP I2C and SPI nodes
Define all six QUP controllers, both as SPI and I2C, allowing boards to
enable these as needed. Associated pinmux states are also defined, to
require only pinconf states to be specified by the boards, as they are
enabled.
Note that SPI has not been tested.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Bjorn Andersson [Sun, 18 Nov 2018 20:01:34 +0000 (12:01 -0800)]
arm64: dts: qcom: qcs404: Define remaining UARTs
Add the BLSP2 BAM and add the remaining four UARTs found on the QCS404
platform.
Note that these has not been tested.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Bjorn Andersson [Sun, 18 Nov 2018 20:01:33 +0000 (12:01 -0800)]
arm64: dts: qcom: qcs404: Specify pinctrl state for UART
BLSP1 UART2 is used as debug uart on the EVB development board, define
pinmux state for the UART in the platform dtsi and pinconf state for it
in the board dts.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Bjorn Andersson [Thu, 17 Jan 2019 19:29:55 +0000 (11:29 -0800)]
arm64: dts: qcom: sdm845: Fix lpasscc reg
Fix up the lpasscc address and size, missed during the conversion to
address- and size-cells of 2.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Sai Prakash Ranjan [Wed, 9 Jan 2019 17:46:49 +0000 (23:16 +0530)]
arm64: dts: qcom: sdm845: Remove the duplicate header inclusion
Remove the duplicate inclusion of qcom,gcc-sdm845.h
mistakenly introduced by commit
6e17f8140521 ("arm64:
dts: sdm845: add prng-ee node").
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
[bjorn: Also fix sort order of lpasscc include, while we're there]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Sibi Sankar [Wed, 31 Oct 2018 06:09:21 +0000 (11:39 +0530)]
arm64: dts: qcom: sdm845: Add reserve-memory nodes
Add reserve-memory nodes for mpss and mba required for
remoteproc mss pil.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Evan Green [Fri, 9 Nov 2018 23:52:12 +0000 (15:52 -0800)]
arm64: dts: qcom: sdm845: Add gpio-ranges to TLMM node
Add the gpio-ranges property to the TLMM node so that GPIO hogs work.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Bjorn Andersson [Thu, 17 Jan 2019 04:29:40 +0000 (20:29 -0800)]
arm64: dts: qcom: sdm845: Extend ranges and describe DMA space
For devices attached to an IOMMU, translation between IOVA and physical
addresses is no longer 1:1 and dma-ranges should be specified to
describe the available IOVA address space.
On SDM845 the busses are implemented with 36 address bits, so dma-ranges
must be defined to reduce the size of the IOVA address space from the 48
bits supported by the SMMU. Without this DMA allocations may end up with
IOVAs outside the valid range, that gets truncated by the bus between
the device and its translation unit.
Also extend ranges to describe the available address space.
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Bjorn Andersson [Thu, 17 Jan 2019 04:29:39 +0000 (20:29 -0800)]
arm64: dts: qcom: sdm845: Increase address and size cells for soc
The busses on SDM845 provides 36 address bits, extend the address and
size cells to make it possible to describe this in "ranges" and
"dma-ranges".
While touching all reg properties, addresses are padded to 8 digits.
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Rajendra Nayak [Thu, 10 Jan 2019 04:02:08 +0000 (09:32 +0530)]
arm64: dts: sdm845: Add rpmh powercontroller node
Add the DT node for the rpmhpd powercontroller.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Rajendra Nayak [Thu, 10 Jan 2019 04:02:06 +0000 (09:32 +0530)]
arm64: dts: msm8996: Add rpmpd device node
Add rpmpd device node and its OPP table
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Govind Singh [Mon, 5 Nov 2018 13:08:37 +0000 (18:38 +0530)]
arm64: dts: sdm845: Add WCN3990 WLAN module device node
Add device node for the ath10k SNOC platform driver probe
and add resources required for WCN3990 on SDM845 soc.
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Sibi Sankar [Fri, 26 Oct 2018 12:26:53 +0000 (17:56 +0530)]
arm64: dts: qcom: sdm845: Add PDC Global reset driver node
This patch adds the node to support PDC Global reset driver on
SDM845 SoCs
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Sibi Sankar [Fri, 26 Oct 2018 12:25:42 +0000 (17:55 +0530)]
arm64: dts: qcom: sdm845: Add SCM DT node
Add SCM DT node to enable SCM functionality on SDM845.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Manu Gautam [Thu, 25 Oct 2018 17:23:17 +0000 (22:53 +0530)]
arm64: dts: qcom: sdm845: Fix pcs_misc region address for UNI PHY
Correct address for pcs_misc register region of USB3 QMP UNI PHY.
These registers are used during runtime-suspend/resume routines
of phy.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Fixes:
ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Taniya Das [Wed, 5 Dec 2018 08:00:36 +0000 (13:30 +0530)]
arm64: dts: sdm845: Add lpasscc node
This adds the low pass audio clock controller node to sdm845 based on
the example in the bindings.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
[bjorn: Disabled lpasscc node, as it's normally protected]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Taniya Das [Mon, 3 Dec 2018 19:36:29 +0000 (11:36 -0800)]
arm64: dts: sdm845: Add videocc node
This adds the video clock controller node to sdm845 based on the examples
in the bindings.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Douglas Anderson [Wed, 28 Nov 2018 18:57:43 +0000 (10:57 -0800)]
arm64: dts: sdm845: Add gpu clock controller node
Add the GPU clock controller nodes as per the example.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Douglas Anderson [Mon, 8 Oct 2018 20:17:11 +0000 (13:17 -0700)]
arm64: dts: qcom: sdm845: Add qspi (quad SPI) node
This adds the Quad SPI controller to the main sdm845 device tree file.
Boards will be expected to assign the proper pinctrl depending on how
many chip selects they have hooked up and how many data lines.
This depends on commit
48735597f7bd ("clk: qcom: Add qspi (Quad SPI)
clock defines for sdm845 to header") to add the needed defines. It
also shouldn't land until the patch ("dt-bindings: spi: Qualcomm Quad
SPI(QSPI) documentation") [1] lands.
[1] https://lkml.kernel.org/r/
20181002214709.162330-1-ryandcase@chromium.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Jeffrey Hugo [Tue, 15 Jan 2019 18:36:23 +0000 (11:36 -0700)]
arm64: dts: qcom: msm8998: Enumerate i2c controllers
msm8998 has a dozen i2c controllers which can be used to connect to board
specific peripherals. Enumerate the controllers so that boards can wire
up as needed.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
[bjorn: Renumbered labels on BLSP2 nodes]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Jeffrey Hugo [Tue, 18 Dec 2018 18:04:43 +0000 (11:04 -0700)]
arm64: dts: qcom: msm8998-mtp: Increase load on l21 for sdcard
l21 is used as sdcard vmmc, and needs the load increased to prevent
voltage drop issues with some sdcards. This addresses -84 errors seen
during sdcard init with SDR104 cards.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Andy Gross [Fri, 25 Jan 2019 04:15:44 +0000 (22:15 -0600)]
Merge branch 'arm64-for-5.1' into arm64-for-5.1-2
Andy Gross [Fri, 25 Jan 2019 04:15:36 +0000 (22:15 -0600)]
Merge tag 'qcom-fixes-for-5.0-rc3' into arm64-for-5.1-2
Qualcomm ARM64 Fixes for 5.0-rc3
* Fix irq controller compatible for the MSM8996 platforms
Jeykumar Sankaran [Tue, 4 Dec 2018 23:54:12 +0000 (15:54 -0800)]
arm64: dts: qcom: sdm845: Add dpu to sdm845 dts file
DPU is short for the Display Processing Unit. It is the display
controller on Qualcomm SDM845 chips.
This change adds MDSS and DSI nodes to enable display on the
target device.
Changes in v2:
- Beefed up commit message
- Use SoC specific compatibles for mdss and dpu (Rob H)
- Use assigned-clocks to set initial clock frequency(Rob H)
Changes in v3:
- added IOMMU node
- Fix device naming (remove _phys)
- Use correct IRQ_TYPE in interrupt specifiers
Changes in v4:
- move mdss node to preserve the unit address sort order
- remove _clk suffix from dsi clocks
(both the comments are from Doug Anderson)
Changes in v5:
- Keep the device status "disabled" by default (Bjorn Andersson)
- Use MDSS_GDSC macro (Jordan)
- Fix phy-names (Jordan)
- List reg ranges in numerical order (Jordan)
Changes in v6:
- Separating this patch out of the series
- fix phy-names
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Srinivas Kandagatla [Mon, 10 Dec 2018 13:56:33 +0000 (13:56 +0000)]
arm64: dts: add msm8996 compatible to gicv3
Add compatible to gicv3 node to enable quirk required to restrict writing
to GICR_WAKER register which is restricted on msm8996 SoC in Hypervisor.
With this quirk MSM8996 can at least boot out of mainline, which can help
community to work with boards based on MSM8996.
Without this patch Qualcomm DB820c board reboots on mainline.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Loic Poulain [Fri, 23 Nov 2018 08:44:38 +0000 (09:44 +0100)]
arm64: dts: qcom: pm8916: Add PON watchdog node
Add watchdog child node to the PM8916 PON device.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Jakob Wuhrer [Fri, 14 Dec 2018 17:01:30 +0000 (18:01 +0100)]
arm64: dts: qcom: Correct "gpiio" typo in msm8996-pins
gpiio5 is missspelt in msm8996-pins.dtsi, fix that.
Signed-off-by: Jakob Wuhrer <jakobwuhrer@airmail.cc>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Loic Poulain [Fri, 14 Dec 2018 11:01:02 +0000 (12:01 +0100)]
arm64: dts: apq8016-sbc: Increase load on l11 for SDCARD
In the same way as for msm8974-hammerhead, l11 load, used for SDCARD
VMMC, needs to be increased in order to prevent any voltage drop issues
(due to limited current) happening with some SDCARDS or during specific
operations (e.g. write).
Tested on Dragonboard-410c and DART-SD410 boards.
Fixes:
4c7d53d16d77 (arm64: dts: apq8016-sbc: add regulators support)
Reported-by: Manabu Igusa <migusa@arrowjapan.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Amit Kucheria [Wed, 12 Dec 2018 10:17:55 +0000 (15:47 +0530)]
arm64: dts: pms405: Export PMIC temperature to thermal framework
The PMS405 PMIC has an ADC that exposes the on-die temperature that we
wire up to spmi-temp-alarm thermal driver. This allows the PMIC
temperature to be exposed to Linux through the thermal framework.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Govind Singh [Tue, 27 Nov 2018 15:17:16 +0000 (20:47 +0530)]
arm64: dts: qcom: qcs404: Add WCN3990 WLAN module device node
Add device node for the ath10k SNOC platform driver probe
and add resources required for WCN3990 on qcs404 soc.
Optional clock and regulator controls are not yet available in
upstream, hence add them once available.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Jorge Ramirez-Ortiz [Thu, 3 Jan 2019 20:34:55 +0000 (21:34 +0100)]
arm64: dts: qcom: qcs404: sdcc1: enable HS400
The controller can support EXT_CSD_CARD_TYPE_HS400_1_8V cards.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Taniya Das [Fri, 21 Dec 2018 18:14:23 +0000 (23:44 +0530)]
arm64: dts: sdm845: Add cpufreq device node
This change adds the cpufreq node as per the bindings example for SDM845.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Evan Green [Mon, 10 Dec 2018 19:28:26 +0000 (11:28 -0800)]
arm64: dts: qcom: sdm845: Add USB PHY lane two
Add the second lane registers for the USB PHY, now that the
QMP phy bindings have been updated. This way the driver can stop
reaching beyond its register region to get at the second lane.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Can Guo [Mon, 10 Dec 2018 19:28:25 +0000 (11:28 -0800)]
arm64: dts: qcom: sdm845: Add UFS nodes for sdm845-mtp
Enable the UFS host controller and PHY on sdm845-mtp.
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Evan Green [Mon, 10 Dec 2018 19:28:24 +0000 (11:28 -0800)]
arm64: dts: qcom: sdm845: add UFS controller
Add the UFS controller and PHY to SDM845.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
[bjorn: Add iommu context for the host controller]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Vivek Gautam [Thu, 11 Oct 2018 09:49:30 +0000 (15:19 +0530)]
arm64: dts: sdm845: Add node for arm,mmu-500
Add device node for arm,mmu-500 available on sdm845.
This MMU-500 with single TCU and multiple TBU architecture
is shared among all the peripherals except gpu.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Evan Green [Thu, 6 Dec 2018 18:45:22 +0000 (10:45 -0800)]
arm64: dts: qcom: sdm845: Add SD nodes for sdm845-mtp
Enable support for one of the micro SD slots on the MTP.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Evan Green [Thu, 6 Dec 2018 18:45:21 +0000 (10:45 -0800)]
arm64: dts: qcom: sdm845: Add SD node
Add one of the two SD controllers to SDM845.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Linus Torvalds [Mon, 7 Jan 2019 01:08:20 +0000 (17:08 -0800)]
Linux 5.0-rc1
Linus Torvalds [Mon, 7 Jan 2019 00:33:10 +0000 (16:33 -0800)]
Merge tag 'kbuild-v4.21-3' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- improve boolinit.cocci and use_after_iter.cocci semantic patches
- fix alignment for kallsyms
- move 'asm goto' compiler test to Kconfig and clean up jump_label
CONFIG option
- generate asm-generic wrappers automatically if arch does not
implement mandatory UAPI headers
- remove redundant generic-y defines
- misc cleanups
* tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: rename generated .*conf-cfg to *conf-cfg
kbuild: remove unnecessary stubs for archheader and archscripts
kbuild: use assignment instead of define ... endef for filechk_* rules
arch: remove redundant UAPI generic-y defines
kbuild: generate asm-generic wrappers if mandatory headers are missing
arch: remove stale comments "UAPI Header export list"
riscv: remove redundant kernel-space generic-y
kbuild: change filechk to surround the given command with { }
kbuild: remove redundant target cleaning on failure
kbuild: clean up rule_dtc_dt_yaml
kbuild: remove UIMAGE_IN and UIMAGE_OUT
jump_label: move 'asm goto' support test to Kconfig
kallsyms: lower alignment on ARM
scripts: coccinelle: boolinit: drop warnings on named constants
scripts: coccinelle: check for redeclaration
kconfig: remove unused "file" field of yylval union
nds32: remove redundant kernel-space generic-y
nios2: remove unneeded HAS_DMA define
Linus Torvalds [Mon, 7 Jan 2019 00:30:14 +0000 (16:30 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf tooling updates form Ingo Molnar:
"A final batch of perf tooling changes: mostly fixes and small
improvements"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
perf session: Add comment for perf_session__register_idle_thread()
perf thread-stack: Fix thread stack processing for the idle task
perf thread-stack: Allocate an array of thread stacks
perf thread-stack: Factor out thread_stack__init()
perf thread-stack: Allow for a thread stack array
perf thread-stack: Avoid direct reference to the thread's stack
perf thread-stack: Tidy thread_stack__bottom() usage
perf thread-stack: Simplify some code in thread_stack__process()
tools gpio: Allow overriding CFLAGS
tools power turbostat: Override CFLAGS assignments and add LDFLAGS to build command
tools thermal tmon: Allow overriding CFLAGS assignments
tools power x86_energy_perf_policy: Override CFLAGS assignments and add LDFLAGS to build command
perf c2c: Increase the HITM ratio limit for displayed cachelines
perf c2c: Change the default coalesce setup
perf trace beauty ioctl: Beautify USBDEVFS_ commands
perf trace beauty: Export function to get the files for a thread
perf trace: Wire up ioctl's USBDEBFS_ cmd table generator
perf beauty ioctl: Add generator for USBDEVFS_ ioctl commands
tools headers uapi: Grab a copy of usbdevice_fs.h
perf trace: Store the major number for a file when storing its pathname
...
Linus Torvalds [Sun, 6 Jan 2019 01:50:59 +0000 (17:50 -0800)]
Change mincore() to count "mapped" pages rather than "cached" pages
The semantics of what "in core" means for the mincore() system call are
somewhat unclear, but Linux has always (since 2.3.52, which is when
mincore() was initially done) treated it as "page is available in page
cache" rather than "page is mapped in the mapping".
The problem with that traditional semantic is that it exposes a lot of
system cache state that it really probably shouldn't, and that users
shouldn't really even care about.
So let's try to avoid that information leak by simply changing the
semantics to be that mincore() counts actual mapped pages, not pages
that might be cheaply mapped if they were faulted (note the "might be"
part of the old semantics: being in the cache doesn't actually guarantee
that you can access them without IO anyway, since things like network
filesystems may have to revalidate the cache before use).
In many ways the old semantics were somewhat insane even aside from the
information leak issue. From the very beginning (and that beginning is
a long time ago: 2.3.52 was released in March 2000, I think), the code
had a comment saying
Later we can get more picky about what "in core" means precisely.
and this is that "later". Admittedly it is much later than is really
comfortable.
NOTE! This is a real semantic change, and it is for example known to
change the output of "fincore", since that program literally does a
mmmap without populating it, and then doing "mincore()" on that mapping
that doesn't actually have any pages in it.
I'm hoping that nobody actually has any workflow that cares, and the
info leak is real.
We may have to do something different if it turns out that people have
valid reasons to want the old semantics, and if we can limit the
information leak sanely.
Cc: Kevin Easton <kevin@guarana.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Masatake YAMATO <yamato@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 6 Jan 2019 19:15:04 +0000 (11:15 -0800)]
Fix 'acccess_ok()' on alpha and SH
Commit
594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'")
broke both alpha and SH booting in qemu, as noticed by Guenter Roeck.
It turns out that the bug wasn't actually in that commit itself (which
would have been surprising: it was mostly a no-op), but in how the
addition of access_ok() to the strncpy_from_user() and strnlen_user()
functions now triggered the case where those functions would test the
access of the very last byte of the user address space.
The string functions actually did that user range test before too, but
they did it manually by just comparing against user_addr_max(). But
with user_access_begin() doing the check (using "access_ok()"), it now
exposed problems in the architecture implementations of that function.
For example, on alpha, the access_ok() helper macro looked like this:
#define __access_ok(addr, size) \
((get_fs().seg & (addr | size | (addr+size))) == 0)
and what it basically tests is of any of the high bits get set (the
USER_DS masking value is 0xfffffc0000000000).
And that's completely wrong for the "addr+size" check. Because it's
off-by-one for the case where we check to the very end of the user
address space, which is exactly what the strn*_user() functions do.
Why? Because "addr+size" will be exactly the size of the address space,
so trying to access the last byte of the user address space will fail
the __access_ok() check, even though it shouldn't. As a result, the
user string accessor functions failed consistently - because they
literally don't know how long the string is going to be, and the max
access is going to be that last byte of the user address space.
Side note: that alpha macro is buggy for another reason too - it re-uses
the arguments twice.
And SH has another version of almost the exact same bug:
#define __addr_ok(addr) \
((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg)
so far so good: yes, a user address must be below the limit. But then:
#define __access_ok(addr, size) \
(__addr_ok((addr) + (size)))
is wrong with the exact same off-by-one case: the case when "addr+size"
is exactly _equal_ to the limit is actually perfectly fine (think "one
byte access at the last address of the user address space")
The SH version is actually seriously buggy in another way: it doesn't
actually check for overflow, even though it did copy the _comment_ that
talks about overflow.
So it turns out that both SH and alpha actually have completely buggy
implementations of access_ok(), but they happened to work in practice
(although the SH overflow one is a serious serious security bug, not
that anybody likely cares about SH security).
This fixes the problems by using a similar macro on both alpha and SH.
It isn't trying to be clever, the end address is based on this logic:
unsigned long __ao_end = __ao_a + __ao_b - !!__ao_b;
which basically says "add start and length, and then subtract one unless
the length was zero". We can't subtract one for a zero length, or we'd
just hit an underflow instead.
For a lot of access_ok() users the length is a constant, so this isn't
actually as expensive as it initially looks.
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 6 Jan 2019 20:21:11 +0000 (12:21 -0800)]
Merge tag 'fscrypt_for_linus' of git://git./linux/kernel/git/tytso/fscrypt
Pull fscrypt updates from Ted Ts'o:
"Add Adiantum support for fscrypt"
* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: add Adiantum support
Linus Torvalds [Sun, 6 Jan 2019 20:19:23 +0000 (12:19 -0800)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 bug fixes from Ted Ts'o:
"Fix a number of ext4 bugs"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix special inode number checks in __ext4_iget()
ext4: track writeback errors using the generic tracking infrastructure
ext4: use ext4_write_inode() when fsyncing w/o a journal
ext4: avoid kernel warning when writing the superblock to a dead device
ext4: fix a potential fiemap/page fault deadlock w/ inline_data
ext4: make sure enough credits are reserved for dioread_nolock writes
Linus Torvalds [Sun, 6 Jan 2019 19:47:26 +0000 (11:47 -0800)]
Merge tag 'dma-mapping-4.21-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fix various regressions introduced in this cycles:
- fix dma-debug tracking for the map_page / map_single
consolidatation
- properly stub out DMA mapping symbols for !HAS_DMA builds to avoid
link failures
- fix AMD Gart direct mappings
- setup the dma address for no kernel mappings using the remap
allocator"
* tag 'dma-mapping-4.21-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING for remapped allocations
x86/amd_gart: fix unmapping of non-GART mappings
dma-mapping: remove a few unused exports
dma-mapping: properly stub out the DMA API for !CONFIG_HAS_DMA
dma-mapping: remove dmam_{declare,release}_coherent_memory
dma-mapping: implement dmam_alloc_coherent using dmam_alloc_attrs
dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs
Linus Torvalds [Sun, 6 Jan 2019 19:40:06 +0000 (11:40 -0800)]
Merge tag 'tag-chrome-platform-for-v4.21' of git://git./linux/kernel/git/bleung/chrome-platform
Pull chrome platform updates from Benson Leung:
- Changes for EC_MKBP_EVENT_SENSOR_FIFO handling.
- Also, maintainership changes. Olofj out, Enric balletbo in.
* tag 'tag-chrome-platform-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
MAINTAINERS: platform/chrome: Add Enric as a maintainer
MAINTAINERS: platform/chrome: remove myself as maintainer
platform/chrome: don't report EC_MKBP_EVENT_SENSOR_FIFO as wakeup
platform/chrome: straighten out cros_ec_get_{next,host}_event() error codes
Linus Torvalds [Sun, 6 Jan 2019 19:37:44 +0000 (11:37 -0800)]
Merge tag 'hwlock-v4.21' of git://github.com/andersson/remoteproc
Pull hwspinlock updates from Bjorn Andersson:
"This adds support for the hardware semaphores found in STM32MP1"
* tag 'hwlock-v4.21' of git://github.com/andersson/remoteproc:
hwspinlock: fix return value check in stm32_hwspinlock_probe()
hwspinlock: add STM32 hwspinlock device
dt-bindings: hwlock: Document STM32 hwspinlock bindings
Eric Biggers [Sun, 6 Jan 2019 13:36:21 +0000 (08:36 -0500)]
fscrypt: add Adiantum support
Add support for the Adiantum encryption mode to fscrypt. Adiantum is a
tweakable, length-preserving encryption mode with security provably
reducible to that of XChaCha12 and AES-256, subject to a security bound.
It's also a true wide-block mode, unlike XTS. See the paper
"Adiantum: length-preserving encryption for entry-level processors"
(https://eprint.iacr.org/2018/720.pdf) for more details. Also see
commit
059c2a4d8e16 ("crypto: adiantum - add Adiantum support").
On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and
the NH hash function. These algorithms are fast even on processors
without dedicated crypto instructions. Adiantum makes it feasible to
enable storage encryption on low-end mobile devices that lack AES
instructions; currently such devices are unencrypted. On ARM Cortex-A7,
on 4096-byte messages Adiantum encryption is about 4 times faster than
AES-256-XTS encryption; decryption is about 5 times faster.
In fscrypt, Adiantum is suitable for encrypting both file contents and
names. With filenames, it fixes a known weakness: when two filenames in
a directory share a common prefix of >= 16 bytes, with CTS-CBC their
encrypted filenames share a common prefix too, leaking information.
Adiantum does not have this problem.
Since Adiantum also accepts long tweaks (IVs), it's also safe to use the
master key directly for Adiantum encryption rather than deriving
per-file keys, provided that the per-file nonce is included in the IVs
and the master key isn't used for any other encryption mode. This
configuration saves memory and improves performance. A new fscrypt
policy flag is added to allow users to opt-in to this configuration.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Linus Torvalds [Sun, 6 Jan 2019 02:35:02 +0000 (18:35 -0800)]
Merge tag 'docs-5.0-fixes' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A handful of late-arriving documentation fixes"
* tag 'docs-5.0-fixes' of git://git.lwn.net/linux:
doc: filesystems: fix bad references to nonexistent ext4.rst file
Documentation/admin-guide: update URL of LKML information link
Docs/kernel-api.rst: Remove blk-tag.c reference
Linus Torvalds [Sun, 6 Jan 2019 02:33:21 +0000 (18:33 -0800)]
Merge tag 'firewire-update' of git://git./linux/kernel/git/ieee1394/linux1394
Pull firewire fixlet from Stefan Richter:
"Remove an explicit dependency in Kconfig which is implied by another
dependency"
* tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: Remove depends on HAS_DMA in case of platform dependency
Linus Torvalds [Sun, 6 Jan 2019 02:29:13 +0000 (18:29 -0800)]
Merge tag 'for-linus-
20190104' of git://git.kernel.dk/linux-block
Pull block updates and fixes from Jens Axboe:
- Pulled in MD changes that Shaohua had queued up for 4.21.
Unfortunately we lost Shaohua late 2018, I'm sending these in on his
behalf.
- In conjunction with the above, I added a CREDITS entry for Shaoua.
- sunvdc queue restart fix (Ming)
* tag 'for-linus-
20190104' of git://git.kernel.dk/linux-block:
Add CREDITS entry for Shaohua Li
block: sunvdc: don't run hw queue synchronously from irq context
md: fix raid10 hang issue caused by barrier
raid10: refactor common wait code from regular read/write request
md: remvoe redundant condition check
lib/raid6: add option to skip algo benchmarking
lib/raid6: sort algos in rough performance order
lib/raid6: check for assembler SSSE3 support
lib/raid6: avoid __attribute_const__ redefinition
lib/raid6: add missing include for raid6test
md: remove set but not used variable 'bi_rdev'
Linus Torvalds [Sun, 6 Jan 2019 02:25:19 +0000 (18:25 -0800)]
Merge tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Happy New Year, just decloaking from leave to get some stuff from the
last week in before rc1:
core:
- two regression fixes for damage blob and atomic
i915 gvt:
- Some missed GVT fixes from the original pull
amdgpu:
- new PCI IDs
- SR-IOV fixes
- DC fixes
- Vega20 fixes"
* tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drm: (53 commits)
drm: Put damage blob when destroy plane state
drm: fix null pointer dereference on null state pointer
drm/amdgpu: Add new VegaM pci id
drm/ttm: Use drm_debug_printer for all ttm_bo_mem_space_debug output
drm/amdgpu: add Vega20 PSP ASD firmware loading
drm/amd/display: Fix MST dp_blank REG_WAIT timeout
drm/amd/display: validate extended dongle caps
drm/amd/display: Use div_u64 for flip timestamp ns to ms
drm/amdgpu/uvd:Change uvd ring name convention
drm/amd/powerplay: add Vega20 LCLK DPM level setting support
drm/amdgpu: print process info when job timeout
drm/amdgpu/nbio7.4: add hw bug workaround for vega20
drm/amdgpu/nbio6.1: add hw bug workaround for vega10/12
drm/amd/display: Optimize passive update planes.
drm/amd/display: verify lane status before exiting verify link cap
drm/amd/display: Fix bug with not updating VSP infoframe
drm/amd/display: Add retry to read ddc_clock pin
drm/amd/display: Don't skip link training for empty dongle
drm/amd/display: Wait edp HPD to high in detect_sink
drm/amd/display: fix surface update sequence
...
Linus Torvalds [Sun, 6 Jan 2019 02:20:51 +0000 (18:20 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Over the break a few defects were found, so this is a -rc style pull
request of various small things that have been posted.
- An attempt to shorten RCU grace period driven delays showed crashes
during heavier testing, and has been entirely reverted
- A missed merge/rebase error between the advise_mr and ib_device_ops
series
- Some small static analysis driven fixes from Julia and Aditya
- Missed ability to create a XRC_INI in the devx verbs interop
series"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
infiniband/qedr: Potential null ptr dereference of qp
infiniband: bnxt_re: qplib: Check the return value of send_message
IB/ipoib: drop useless LIST_HEAD
IB/core: Add advise_mr to the list of known ops
Revert "IB/mlx5: Fix long EEH recover time with NVMe offloads"
IB/mlx5: Allow XRC INI usage via verbs in DEVX context
Linus Torvalds [Sun, 6 Jan 2019 02:15:37 +0000 (18:15 -0800)]
Merge tag 'fbdev-v4.21' of git://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"This time the pull request is really small.
The most notable changes are fixing fbcon to not cause crash on
unregister_framebuffer() operation when there is more than one
framebuffer, adding config option to center the bootup logo and making
FB_BACKLIGHT config option tristate (which in turn uncovered incorrect
FB_BACKLIGHT usage by DRM's nouveau driver).
Summary:
- fix fbcon to not cause crash on unregister_framebuffer() when there
is more than one framebuffer (Noralf Trønnes)
- improve support for small rotated displays (Peter Rosin)
- fix probe failure handling in udlfb driver (Dan Carpenter)
- add config option to center the bootup logo (Peter Rosin)
- make FB_BACKLIGHT config option tristate (Rob Clark)
- remove superfluous HAS_DMA dependency for goldfishfb driver (Geert
Uytterhoeven)
- misc fixes (Alexey Khoroshilov, YueHaibing, Colin Ian King, Lubomir
Rintel)
- misc cleanups (Yangtao Li, Wen Yang)
also there is DRM's nouveau driver fix for wrong FB_BACKLIGHT config
option usage (FB_BACKLIGHT is for internal fbdev subsystem use only)"
* tag 'fbdev-v4.21' of git://github.com/bzolnier/linux:
drm/nouveau: fix incorrect FB_BACKLIGHT usage in Kconfig
fbdev: fbcon: Fix unregister crash when more than one framebuffer
fbdev: Remove depends on HAS_DMA in case of platform dependency
pxa168fb: trivial typo fix
fbdev: fsl-diu: remove redundant null check on cmap
fbdev: omap2: omapfb: convert to DEFINE_SHOW_ATTRIBUTE
fbdev: uvesafb: fix spelling mistake "memoery" -> "memory"
fbdev: fbmem: add config option to center the bootup logo
fbdev: fbmem: make fb_show_logo_line return the end instead of the height
video: fbdev: pxafb: Fix "WARNING: invalid free of devm_ allocated data"
fbdev: fbmem: behave better with small rotated displays and many CPUs
video: clps711x-fb: release disp device node in probe()
fbdev: make FB_BACKLIGHT a tristate
udlfb: fix some inconsistent NULL checking
Linus Torvalds [Sun, 6 Jan 2019 02:13:35 +0000 (18:13 -0800)]
Merge branch 'i2c/for-5.0' of git://git./linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has only driver updates for you this time.
Mostly new IDs/DT compatibles, also SPDX conversions, small cleanups.
STM32F7 got FastMode+ and PM support, Axxia some reliabilty
improvements"
* 'i2c/for-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (26 commits)
i2c: Add Actions Semiconductor Owl family S700 I2C support
dt-bindings: i2c: Add S700 support for Actions Semi Soc's
i2c: ismt: Add support for Intel Cedar Fork
i2c: tegra: Switch to SPDX identifier
i2c: tegra: Add missing kerneldoc for some fields
i2c: tegra: Cleanup kerneldoc comments
i2c: axxia: support sequence command mode
dt-bindings: i2c: rcar: Add r8a774c0 support
dt-bindings: i2c: sh_mobile: Add r8a774c0 support
i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E)
i2c: i2c-cros-ec-tunnel: Switch to SPDX identifier.
i2c: powermac: Use of_node_name_eq for node name comparisons
i2c-axxia: check for error conditions first
i2c-axxia: dedicated function to set client addr
dt-bindings: i2c: Use correct vendor prefix for Atmel
i2c: tegra: replace spin_lock_irqsave with spin_lock in ISR
eeprom: at24: add support for
24c2048
dt-bindings: eeprom: at24: add "atmel,
24c2048" compatible string
i2c: i2c-stm32f7: add PM Runtime support
i2c: sh_mobile: add support for r8a77990 (R-Car E3)
...
Linus Torvalds [Sun, 6 Jan 2019 01:57:34 +0000 (17:57 -0800)]
Merge tag 'pci-v4.21-changes' of git://git./linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- Remove unused lists from ASPM pcie_link_state (Frederick Lawler)
- Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian
King)
- Expand Kconfig "PF" acronyms (Randy Dunlap)
- Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas)
- Add missing include to drivers/pci.h (Alexandru Gagniuc)
- Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it
instead of xhci (Thinh Nguyen)
- Clean up P2PDMA documentation (Randy Dunlap)
- Allow runtime PM even if driver doesn't supply callbacks (Jarkko
Nikula)
- Remove status check after submitting Switchtec MRPC Firmware Download
commands to avoid Completion Timeouts (Kelvin Cao)
- Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher)
- Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue
(Joey Zhang)
- Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao)
- Add Switchtec MRPC DMA mode support (Wesley Sheng)
- Skip VF scanning on powerpc, which does this in firmware (Sebastian
Ott)
- Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang)
- Constify histb dw_pcie_host_ops structure (Julia Lawall)
- Support multiple power domains for imx6 (Leonard Crestez)
- Constify layerscape driver data (Stefan Agner)
- Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho)
- Support armada8k GPIO reset (Baruch Siach)
- Support suspend/resume support on imx6 (Leonard Crestez)
- Don't hard-code DesignWare DBI/ATU offst (Stephen Warren)
- Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov)
- Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi)
- Mask DesignWare interrupts instead of disabling them to avoid lost
interrupts (Marc Zyngier)
- Add locking when acking DesignWare interrupts (Marc Zyngier)
- Ack DesignWare interrupts in the proper callbacks (Marc Zyngier)
- Use devm resource parser in mediatek (Honghui Zhang)
- Remove unused mediatek "num-lanes" DT property (Honghui Zhang)
- Add UniPhier PCIe controller driver and DT bindings (Kunihiko
Hayashi)
- Enable MSI for imx6 downstream components (Richard Zhu)
* tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits)
PCI: imx: Enable MSI from downstream components
s390/pci: skip VF scanning
PCI/IOV: Add flag so platforms can skip VF scanning
PCI/IOV: Factor out sriov_add_vfs()
PCI: uniphier: Add UniPhier PCIe host controller support
dt-bindings: PCI: Add UniPhier PCIe host controller description
PCI: amlogic: Add the Amlogic Meson PCIe controller driver
dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
arm64: dts: mt7622: Remove un-used property for PCIe
arm: dts: mt7623: Remove un-used property for PCIe
dt-bindings: PCI: MediaTek: Remove un-used property
PCI: mediatek: Remove un-used variant in struct mtk_pcie_port
MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry
PCI: dwc: Don't hard-code DBI/ATU offset
PCI: imx: Add imx6sx suspend/resume support
PCI: armada8k: Add support for gpio controlled reset signal
PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7
PCI: dwc: layerscape: Constify driver data
PCI: imx: Add multi-pd support
PCI: Override Synopsys USB 3.x HAPS device class
...
Linus Torvalds [Sun, 6 Jan 2019 01:53:40 +0000 (17:53 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- high-resolution scrolling support that gracefully handles differences
between MS and Logitech implementations in HW, from Peter Hutterer
and Harry Cutts
- MSI IRQ support for intel-ish driver, from Song Hongyan
- support for new hardware (Cougar 700K, Odys Winbook 13, ASUS FX503VD,
ASUS T101HA) from Daniel M. Lambea, Hans de Goede and Aleix Roca
Nonell
- other small assorted fixups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (22 commits)
HID: i2c-hid: Add Odys Winbook 13 to descriptor override
HID: lenovo: Add checks to fix of_led_classdev_register
HID: intel-ish-hid: add MSI interrupt support
HID: debug: Change to use DEFINE_SHOW_ATTRIBUTE macro
HID: doc: fix wrong data structure reference for UHID_OUTPUT
HID: intel-ish-hid: fixes incorrect error handling
HID: asus: Add support for the ASUS T101HA keyboard dock
HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice
HID: logitech: Enable high-resolution scrolling on Logitech mice
HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration"
HID: logitech-hidpp: fix typo, hiddpp to hidpp
HID: input: use the Resolution Multiplier for high-resolution scrolling
HID: core: process the Resolution Multiplier
HID: core: store the collections as a basic tree
Input: add `REL_WHEEL_HI_RES` and `REL_HWHEEL_HI_RES`
HID: input: support Microsoft wireless radio control hotkey
HID: use macros in IS_INPUT_APPLICATION
HID: asus: Add support for the ASUS FX503VD laptop
HID: asus: Add event handler to catch unmapped Asus Vendor UsagePage codes
HID: cougar: Add support for Cougar 700K Gaming Keyboard
...
Linus Torvalds [Sun, 6 Jan 2019 01:51:36 +0000 (17:51 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/livepatching
Pull livepatch update from Jiri Kosina:
"Return value checking fixup in livepatching samples, from Nicholas Mc
Guire"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: check kzalloc return values
Masahiro Yamada [Sat, 5 Jan 2019 03:01:51 +0000 (12:01 +0900)]
kconfig: rename generated .*conf-cfg to *conf-cfg
Remove the dot-prefixing since it is just a matter of the
.gitignore file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 3 Jan 2019 01:47:05 +0000 (10:47 +0900)]
kbuild: remove unnecessary stubs for archheader and archscripts
Make simply skips a missing rule when it is marked as .PHONY.
Remove the dummy targets.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 3 Jan 2019 01:16:54 +0000 (10:16 +0900)]
kbuild: use assignment instead of define ... endef for filechk_* rules
You do not have to use define ... endef for filechk_* rules.
For simple cases, the use of assignment looks cleaner, IMHO.
I updated the usage for scripts/Kbuild.include in case somebody
misunderstands the 'define ... endif' is the requirement.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Masahiro Yamada [Thu, 3 Jan 2019 01:10:39 +0000 (10:10 +0900)]
arch: remove redundant UAPI generic-y defines
Now that Kbuild automatically creates asm-generic wrappers for missing
mandatory headers, it is redundant to list the same headers in
generic-y and mandatory-y.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Masahiro Yamada [Thu, 3 Jan 2019 01:10:38 +0000 (10:10 +0900)]
kbuild: generate asm-generic wrappers if mandatory headers are missing
Some time ago, Sam pointed out a certain degree of overwrap between
generic-y and mandatory-y. (https://lkml.org/lkml/2017/7/10/121)
I tweaked the meaning of mandatory-y a little bit; now it defines the
minimum set of ASM headers that all architectures must have.
If arch does not have specific implementation of a mandatory header,
Kbuild will let it fallback to the asm-generic one by automatically
generating a wrapper. This will allow to drop lots of redundant
generic-y defines.
Previously, "mandatory" was used in the context of UAPI, but I guess
this can be extended to kernel space ASM headers.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Masahiro Yamada [Thu, 3 Jan 2019 01:10:37 +0000 (10:10 +0900)]
arch: remove stale comments "UAPI Header export list"
These comments are leftovers of commit
fcc8487d477a ("uapi: export all
headers under uapi directories").
Prior to that commit, exported headers must be explicitly added to
header-y. Now, all headers under the uapi/ directories are exported.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 3 Jan 2019 01:10:36 +0000 (10:10 +0900)]
riscv: remove redundant kernel-space generic-y
This commit removes redundant generic-y defines in
arch/riscv/include/asm/Kbuild.
[1] It is redundant to define the same generic-y in both
arch/$(ARCH)/include/asm/Kbuild and
arch/$(ARCH)/include/uapi/asm/Kbuild.
Remove the following generic-y:
errno.h
fcntl.h
ioctl.h
ioctls.h
ipcbuf.h
mman.h
msgbuf.h
param.h
poll.h
posix_types.h
resource.h
sembuf.h
setup.h
shmbuf.h
signal.h
socket.h
sockios.h
stat.h
statfs.h
swab.h
termbits.h
termios.h
types.h
[2] It is redundant to define generic-y when arch-specific
implementation exists in arch/$(ARCH)/include/asm/*.h
Remove the following generic-y:
cacheflush.h
module.h
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Mon, 31 Dec 2018 08:24:09 +0000 (17:24 +0900)]
kbuild: change filechk to surround the given command with { }
filechk_* rules often consist of multiple 'echo' lines. They must be
surrounded with { } or ( ) to work correctly. Otherwise, only the
string from the last 'echo' would be written into the target.
Let's take care of that in the 'filechk' in scripts/Kbuild.include
to clean up filechk_* rules.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Mon, 31 Dec 2018 08:24:08 +0000 (17:24 +0900)]
kbuild: remove redundant target cleaning on failure
Since commit
9c2af1c7377a ("kbuild: add .DELETE_ON_ERROR special
target"), the target file is automatically deleted on failure.
The boilerplate code
... || { rm -f $@; false; }
is unneeded.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Mon, 31 Dec 2018 04:09:00 +0000 (13:09 +0900)]
kbuild: clean up rule_dtc_dt_yaml
Commit
3a2429e1faf4 ("kbuild: change if_changed_rule for multi-line
recipe") and commit
4f0e3a57d6eb ("kbuild: Add support for DT binding
schema checks") came in via different sub-systems.
This is a follow-up cleanup.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Mon, 31 Dec 2018 01:05:01 +0000 (10:05 +0900)]
kbuild: remove UIMAGE_IN and UIMAGE_OUT
The only/last user of UIMAGE_IN/OUT was removed by commit
4722a3e6b716
("microblaze: fix multiple bugs in arch/microblaze/boot/Makefile").
The input and output should always be $< and $@.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sun, 30 Dec 2018 15:14:15 +0000 (00:14 +0900)]
jump_label: move 'asm goto' support test to Kconfig
Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label".
The jump label is controlled by HAVE_JUMP_LABEL, which is defined
like this:
#if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
# define HAVE_JUMP_LABEL
#endif
We can improve this by testing 'asm goto' support in Kconfig, then
make JUMP_LABEL depend on CC_HAS_ASM_GOTO.
Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will
match to the real kernel capability.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Mathias Krause [Sun, 30 Dec 2018 12:36:00 +0000 (13:36 +0100)]
kallsyms: lower alignment on ARM
As mentioned in the info pages of gas, the '.align' pseudo op's
interpretation of the alignment value is architecture specific.
It might either be a byte value or taken to the power of two.
On ARM it's actually the latter which leads to unnecessary large
alignments of 16 bytes for 32 bit builds or 256 bytes for 64 bit
builds.
Fix this by switching to '.balign' instead which is consistent
across all architectures.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Julia Lawall [Sat, 29 Dec 2018 06:14:16 +0000 (07:14 +0100)]
scripts: coccinelle: boolinit: drop warnings on named constants
Coccinelle doesn't always have access to the values of named
(#define) constants, and they may likely often be bound to true
and false values anyway, resulting in false positives. So stop
warning about them.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Julia Lawall [Fri, 28 Dec 2018 14:49:01 +0000 (15:49 +0100)]
scripts: coccinelle: check for redeclaration
Avoid reporting on the use of an iterator index variable when
the variable is redeclared.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Fri, 21 Dec 2018 06:23:02 +0000 (15:23 +0900)]
kconfig: remove unused "file" field of yylval union
This has never been used.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sun, 16 Dec 2018 14:14:11 +0000 (23:14 +0900)]
nds32: remove redundant kernel-space generic-y
This commit removes redundant generic-y defines in
arch/nds32/include/asm/Kbuild.
[1] It is redundant to define the same generic-y in both
arch/$(ARCH)/include/asm/Kbuild and
arch/$(ARCH)/include/uapi/asm/Kbuild.
Remove the following generic-y:
bitsperlong.h
bpf_perf_event.h
errno.h
fcntl.h
ioctl.h
ioctls.h
mman.h
shmbuf.h
stat.h
[2] It is redundant to define generic-y when arch-specific
implementation exists in arch/$(ARCH)/include/asm/*.h
Remove the following generic-y:
ftrace.h
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Mon, 26 Nov 2018 07:42:10 +0000 (16:42 +0900)]
nios2: remove unneeded HAS_DMA define
kernel/dma/Kconfig globally defines HAS_DMA as follows:
config HAS_DMA
bool
depends on !NO_DMA
default y
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Linus Torvalds [Sun, 6 Jan 2019 00:07:28 +0000 (16:07 -0800)]
Merge branch 'next' of git://git./linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
- Add locking for cooling device sysfs attribute in case the cooling
device state is changed by userspace and thermal framework
simultaneously. (Thara Gopinath)
- Fix a problem that passive cooling is reset improperly after system
suspend/resume. (Wei Wang)
- Cleanup the driver/thermal/ directory by moving intel and qcom
platform specific drivers to platform specific sub-directories. (Amit
Kucheria)
- Some trivial cleanups. (Lukasz Luba, Wolfram Sang)
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal/intel: fixup for Kconfig string parsing tightening up
drivers: thermal: Move QCOM_SPMI_TEMP_ALARM into the qcom subdir
drivers: thermal: Move various drivers for intel platforms into a subdir
thermal: Fix locking in cooling device sysfs update cur_state
Thermal: do not clear passive state during system sleep
thermal: zx2967_thermal: simplify getting .driver_data
thermal: st: st_thermal: simplify getting .driver_data
thermal: spear_thermal: simplify getting .driver_data
thermal: rockchip_thermal: simplify getting .driver_data
thermal: int340x_thermal: int3400_thermal: simplify getting .driver_data
thermal: remove unused function parameter
Linus Torvalds [Sun, 6 Jan 2019 00:01:16 +0000 (16:01 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal SoC updates from Eduardo Valentin:
- Tegra DT binding documentation for Tegra194
- Armada now supports ap806 and cp110
- RCAR thermal now supports R8A774C0 and R8A77990
- Fixes on thermal_hwmon, IMX, generic-ADC, ST, RCAR, Broadcom,
Uniphier, QCOM, Tegra, PowerClamp, and Armada thermal drivers.
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (22 commits)
thermal: generic-adc: Fix adc to temp interpolation
thermal: rcar_thermal: add R8A77990 support
dt-bindings: thermal: rcar-thermal: add R8A77990 support
thermal: rcar_thermal: add R8A774C0 support
dt-bindings: thermal: rcar-thermal: add R8A774C0 support
dt-bindings: cp110: document the thermal interrupt capabilities
dt-bindings: ap806: document the thermal interrupt capabilities
MAINTAINERS: thermal: add entry for Marvell MVEBU thermal driver
thermal: armada: add overheat interrupt support
thermal: st: fix Makefile typo
thermal: uniphier: Convert to SPDX identifier
thermal/intel_powerclamp: Change to use DEFINE_SHOW_ATTRIBUTE macro
thermal: tegra: soctherm: Change to use DEFINE_SHOW_ATTRIBUTE macro
dt-bindings: thermal: tegra-bpmp: Add Tegra194 support
thermal: imx: save one condition block for normal case of nvmem initialization
thermal: imx: fix for dependency on cpu-freq
thermal: tsens: qcom: do not create duplicate regmap debugfs entries
thermal: armada: Use PTR_ERR_OR_ZERO in armada_thermal_probe_legacy()
dt-bindings: thermal: rcar-gen3-thermal: All variants use 3 interrupts
thermal: broadcom: use devm_thermal_zone_of_sensor_register
...
Linus Torvalds [Sat, 5 Jan 2019 22:08:00 +0000 (14:08 -0800)]
Merge tag 'trace-v4.21-1' of git://git./linux/kernel/git/rostedt/linux-trace
Pull ftrace sh build fix from Steven Rostedt:
"It appears that the zero-day bot did find a bug in my sh build.
And that I didn't have the bad code in my config file when I cross
compiled it, although there are a few other errors in sh that makes it
not build for me, I missed that I added one more"
* tag 'trace-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
sh: ftrace: Fix missing parenthesis in WARN_ON()
Linus Torvalds [Sat, 5 Jan 2019 22:05:06 +0000 (14:05 -0800)]
Merge tag '4.21-smb3-small-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb3 fixes from Steve French:
"Three fixes, one for stable, one adds the (most secure) SMB3.1.1
dialect to default list requested"
* tag '4.21-smb3-small-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: add smb3.1.1 to default dialect list
cifs: fix confusing warning message on reconnect
smb3: fix large reads on encrypted connections
Linus Torvalds [Sat, 5 Jan 2019 22:02:22 +0000 (14:02 -0800)]
Merge tag 'iomap-4.21-merge-3' of git://git./fs/xfs/xfs-linux
Pull iomap maintainer update from Darrick Wong:
"Christoph Hellwig and I have decided to take responsibility for the fs
iomap code rather than let it languish further"
* tag 'iomap-4.21-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: take responsibility for the filesystem iomap code
Linus Torvalds [Sat, 5 Jan 2019 22:00:56 +0000 (14:00 -0800)]
Merge tag 'xfs-4.21-merge-3' of git://git./fs/xfs/xfs-linux
Pull xfs fixlets from Darrick Wong:
"Remove a couple of unnecessary local variables"
* tag 'xfs-4.21-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: xfs_fsops: drop useless LIST_HEAD
xfs: xfs_buf: drop useless LIST_HEAD
Linus Torvalds [Sat, 5 Jan 2019 21:58:08 +0000 (13:58 -0800)]
Merge tag 'ceph-for-4.21-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"A fairly quiet round: a couple of messenger performance improvements
from myself and a few cap handling fixes from Zheng"
* tag 'ceph-for-4.21-rc1' of git://github.com/ceph/ceph-client:
ceph: don't encode inode pathes into reconnect message
ceph: update wanted caps after resuming stale session
ceph: skip updating 'wanted' caps if caps are already issued
ceph: don't request excl caps when mount is readonly
ceph: don't update importing cap's mseq when handing cap export
libceph: switch more to bool in ceph_tcp_sendmsg()
libceph: use MSG_SENDPAGE_NOTLAST with ceph_tcp_sendpage()
libceph: use sock_no_sendpage() as a fallback in ceph_tcp_sendpage()
libceph: drop last_piece logic from write_partial_message_data()
ceph: remove redundant assignment
ceph: cleanup splice_dentry()
Olof Johansson [Sat, 5 Jan 2019 21:21:18 +0000 (13:21 -0800)]
lib/genalloc.c: include vmalloc.h
Fixes build break on most ARM/ARM64 defconfigs:
lib/genalloc.c: In function 'gen_pool_add_virt':
lib/genalloc.c:190:10: error: implicit declaration of function 'vzalloc_node'; did you mean 'kzalloc_node'?
lib/genalloc.c:190:8: warning: assignment to 'struct gen_pool_chunk *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
lib/genalloc.c: In function 'gen_pool_destroy':
lib/genalloc.c:254:3: error: implicit declaration of function 'vfree'; did you mean 'kfree'?
Fixes:
6862d2fc8185 ('lib/genalloc.c: use vzalloc_node() to allocate the bitmap')
Cc: Huang Shijie <sjhuang@iluvatar.ai>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Skidanov <alexey.skidanov@intel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 5 Jan 2019 21:25:58 +0000 (13:25 -0800)]
Merge branch 'mount.part1' of git://git./linux/kernel/git/viro/vfs
Pull vfs mount API prep from Al Viro:
"Mount API prereqs.
Mostly that's LSM mount options cleanups. There are several minor
fixes in there, but nothing earth-shattering (leaks on failure exits,
mostly)"
* 'mount.part1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (27 commits)
mount_fs: suppress MAC on MS_SUBMOUNT as well as MS_KERNMOUNT
smack: rewrite smack_sb_eat_lsm_opts()
smack: get rid of match_token()
smack: take the guts of smack_parse_opts_str() into a new helper
LSM: new method: ->sb_add_mnt_opt()
selinux: rewrite selinux_sb_eat_lsm_opts()
selinux: regularize Opt_... names a bit
selinux: switch away from match_token()
selinux: new helper - selinux_add_opt()
LSM: bury struct security_mnt_opts
smack: switch to private smack_mnt_opts
selinux: switch to private struct selinux_mnt_opts
LSM: hide struct security_mnt_opts from any generic code
selinux: kill selinux_sb_get_mnt_opts()
LSM: turn sb_eat_lsm_opts() into a method
nfs_remount(): don't leak, don't ignore LSM options quietly
btrfs: sanitize security_mnt_opts use
selinux; don't open-code a loop in sb_finish_set_opts()
LSM: split ->sb_set_mnt_opts() out of ->sb_kern_mount()
new helper: security_sb_eat_lsm_opts()
...
Linus Torvalds [Sat, 5 Jan 2019 21:18:59 +0000 (13:18 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull trivial vfs updates from Al Viro:
"A few cleanups + Neil's namespace_unlock() optimization"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
exec: make prepare_bprm_creds static
genheaders: %-<width>s had been there since v6; %-*s - since v7
VFS: use synchronize_rcu_expedited() in namespace_unlock()
iov_iter: reduce code duplication
Linus Torvalds [Sat, 5 Jan 2019 20:48:25 +0000 (12:48 -0800)]
Merge tag 'mips_fixes_4.21_1' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A few early MIPS fixes for 4.21:
- The Broadcom BCM63xx platform sees a fix for resetting the BCM6368
ethernet switch, and the removal of a platform device we've never
had a driver for.
- The Alchemy platform sees a few fixes for bitrot that occurred
within the past few cycles.
- We now enable vectored interrupt support for the MediaTek MT7620
SoC, which makes sense since they're supported by the SoC but in
this case also works around a bug relating to the location of
exception vectors when using a recent version of U-Boot.
- The atomic64_fetch_*_relaxed() family of functions see a fix for a
regression in MIPS64 kernels since v4.19.
- Cavium Octeon III CN7xxx systems will now disable their RGMII
interfaces rather than attempt to enable them & warn about the lack
of support for doing so, as they did since initial CN7xxx ethernet
support was added in v4.7.
- The Microsemi/Microchip MSCC SoCs gain a MAINTAINERS entry.
- .mailmap now provides consistency for Dengcheng Zhu's name &
current email address"
* tag 'mips_fixes_4.21_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: OCTEON: mark RGMII interface disabled on OCTEON III
MIPS: Fix a R10000_LLSC_WAR logic in atomic.h
MIPS: BCM63XX: drop unused and broken DSP platform device
mailmap: Update name spelling and email for Dengcheng Zhu
MIPS: ralink: Select CONFIG_CPU_MIPSR2_IRQ_VI on MT7620/8
MAINTAINERS: Add a maintainer for MSCC MIPS SoCs
MIPS: Alchemy: update dma masks for devboard devices
MIPS: Alchemy: update cpu-feature-overrides
MIPS: Alchemy: drop DB1000 IrDA support bits
MIPS: alchemy: cpu_all_mask is forbidden for clock event devices
MIPS: BCM63XX: fix switch core reset on BCM6368
Linus Torvalds [Sat, 5 Jan 2019 19:48:44 +0000 (11:48 -0800)]
Merge tag 'powerpc-4.21-2' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A fix for the recent access_ok() change, which broke the build. We
recently added a use of type in order to squash a warning elsewhere
about type being unused.
A handful of other minor build fixes, and one defconfig update.
Thanks to: Christian Lamparter, Christophe Leroy, Diana Craciun,
Mathieu Malaterre"
* tag 'powerpc-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Drop use of 'type' from access_ok()
KVM: PPC: Book3S HV: radix: Fix uninitialized var build error
powerpc/configs: Add PPC4xx_OCM to ppc40x_defconfig
powerpc/4xx/ocm: Fix phys_addr_t printf warnings
powerpc/4xx/ocm: Fix compilation error due to PAGE_KERNEL usage
powerpc/fsl: Fixed warning: orphan section `__btb_flush_fixup'
Linus Torvalds [Sat, 5 Jan 2019 19:44:20 +0000 (11:44 -0800)]
Merge branch 'parisc-4.21-2' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fix from Helge Deller:
"Fix boot issues with a series of parisc servers since kernel 4.20.
Remapping kernel text with set_kernel_text_rw() missed to remap from
lowest up until the highest huge-page aligned kernel text addresss"
* 'parisc-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Remap hugepage-aligned pages in set_kernel_text_rw()
Linus Torvalds [Sat, 5 Jan 2019 19:35:55 +0000 (11:35 -0800)]
Merge tag 'for-4.21' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux
Pull h8300 fix from Yoshinori Sato:
"Build problem fix"
* tag 'for-4.21' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux:
h8300: pci: Remove local declaration of pcibios_penalize_isa_irq
Linus Torvalds [Sat, 5 Jan 2019 19:30:37 +0000 (11:30 -0800)]
Merge tag 'armsoc-late' of git://git./linux/kernel/git/arm/arm-soc
Pull more ARM SoC updates from Olof Johansson:
"A few updates that we merged late but are low risk for regressions for
other platforms (and a few other straggling patches):
- I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
here. They're for a driver for the PL353 SRAM controller and a
build fix for the qualcomm scm driver.
- A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated
Vivante GPU, 256MB RAM, Wifi). This includes some acked
platform-specific drivers (serial, etc). This also include DTs for
two boards with this SoC, OrangePi 2G and OrangePi i86.
- i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
video playback offload). This is the first i.MX 64-bit SoC.
- Some minor updates to Samsung boards (adding a few peripherals in
DTs).
- Small rework for SMP bootup on STi platforms.
- A couple of TEE driver fixes.
- A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
enabled in defconfigs"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
arm64: defconfig: Re-enable bcm2835-thermal driver
MAINTAINERS: Add entry for RDA Micro SoC architecture
tty: serial: Add RDA8810PL UART driver
ARM: dts: rda8810pl: Add interrupt support for UART
dt-bindings: serial: Document RDA Micro UART
ARM: dts: rda8810pl: Add timer support
ARM: dts: Add devicetree for OrangePi i96 board
ARM: dts: Add devicetree for OrangePi 2G IoT board
ARM: dts: Add devicetree for RDA8810PL SoC
ARM: Prepare RDA8810PL SoC
dt-bindings: arm: Document RDA8810PL and reference boards
dt-bindings: Add RDA Micro vendor prefix
ARM: sti: remove pen_release and boot_lock
arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
arm64: dts: imx8mq-evk: enable watchdog
arm64: dts: imx8mq: add watchdog devices
MAINTAINERS: add i.MX8 DT path to i.MX architecture
arm64: add support for i.MX8M EVK board
arm64: add basic DTS for i.MX8MQ
...
Linus Torvalds [Sat, 5 Jan 2019 19:28:39 +0000 (11:28 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"I'm safely chained back up to my desk, so please pull these arm64
fixes for -rc1 that address some issues that cropped up during the
merge window:
- Prevent KASLR from mapping the top page of the virtual address
space
- Fix device-tree probing of SDEI driver
- Fix incorrect register offset definition in Hisilicon DDRC PMU
driver
- Fix compilation issue with older binutils not liking unsigned
immediates
- Fix uapi headers so that libc can provide its own sigcontext
definition
- Fix handling of private compat syscalls
- Hook up compat io_pgetevents() syscall for 32-bit tasks
- Cleanup to arm64 Makefile (including now to avoid silly conflicts)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: compat: Hook up io_pgetevents() for 32-bit tasks
arm64: compat: Don't pull syscall number from regs in arm_compat_syscall
arm64: compat: Avoid sending SIGILL for unallocated syscall numbers
arm64/sve: Disentangle <uapi/asm/ptrace.h> from <uapi/asm/sigcontext.h>
arm64/sve: ptrace: Fix SVE_PT_REGS_OFFSET definition
drivers/perf: hisi: Fixup one DDRC PMU register offset
arm64: replace arm64-obj-* in Makefile with obj-*
arm64: kaslr: Reserve size of ARM64_MEMSTART_ALIGN in linear region
firmware: arm_sdei: Fix DT platform device creation
firmware: arm_sdei: fix wrong of_node_put() in init function
arm64: entry: remove unused register aliases
arm64: smp: Fix compilation error
Linus Torvalds [Sat, 5 Jan 2019 19:23:17 +0000 (11:23 -0800)]
Merge tag 'for-4.21' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
"Included in this update:
- Florian Fainelli noticed that userspace segfaults caused by the
lack of kernel-userspace helpers was hard to diagnose; we now issue
a warning when userspace tries to use the helpers but the kernel
has them disabled.
- Ben Dooks wants compatibility for the old ATAG serial number with
DT systems.
- Some cleanup of assembly by Nicolas Pitre.
- User accessors optimisation from Vincent Whitchurch.
- More robust kdump on SMP systems from Yufen Wang.
- Sebastian Andrzej Siewior noticed problems with the SMP "boot_lock"
on RT kernels, and so we convert the Versatile series of platforms
to use a raw spinlock instead, consolidating the Versatile
implementation. We entirely remove the boot_lock on OMAP systems,
where it's unnecessary. Further patches for other systems will be
submitted for the following merge window.
- Start switching old StrongARM-11x0 systems to use gpiolib rather
than their private GPIO implementation - mostly PCMCIA bits.
- ARM Kconfig cleanups.
- Cleanup a mostly harmless mistake in the recent Spectre patch in
4.20 (which had the effect that data that can be placed into the
init sections was incorrectly always placed in the rodata section)"
* tag 'for-4.21' of git://git.armlinux.org.uk/~rmk/linux-arm: (25 commits)
ARM: omap2: remove unnecessary boot_lock
ARM: versatile: rename and comment SMP implementation
ARM: versatile: convert boot_lock to raw
ARM: vexpress/realview: consolidate immitation CPU hotplug
ARM: fix the cockup in the previous patch
ARM: sa1100/cerf: switch to using gpio_led_register_device()
ARM: sa1100/assabet: switch to using gpio leds
ARM: sa1100/assabet: add gpio keys support for right-hand two buttons
ARM: sa1111: remove legacy GPIO interfaces
pcmcia: sa1100*: remove redundant bvd1/bvd2 setting
ARM: pxa/lubbock: switch PCMCIA to MAX1600 library
ARM: pxa/mainstone: switch PCMCIA to MAX1600 library and gpiod APIs
ARM: sa1100/neponset: switch PCMCIA to MAX1600 library and gpiod APIs
ARM: sa1100/jornada720: switch PCMCIA to gpiod APIs
pcmcia: add MAX1600 library
ARM: sa1100: explicitly register sa11x0-pcmcia devices
ARM: 8813/1: Make aligned 2-byte getuser()/putuser() atomic on ARMv6+
ARM: 8812/1: Optimise copy_{from/to}_user for !CPU_USE_DOMAINS
ARM: 8811/1: always list both ldrd/strd registers explicitly
ARM: 8808/1: kexec:offline panic_smp_self_stop CPU
...
Linus Torvalds [Sat, 5 Jan 2019 17:50:07 +0000 (09:50 -0800)]
Merge tag 'csky-for-linus-4.21' of git://github.com/c-sky/csky-linux
Pull arch/csky updates from Guo Ren:
"Here are three main features (cpu_hotplug, basic ftrace, basic perf)
and some bugfixes:
Features:
- Add CPU-hotplug support for SMP
- Add ftrace with function trace and function graph trace
- Add Perf support
- Add EM_CSKY_OLD 39
- optimize kernel panic print.
- remove syscall_exit_work
Bugfixes:
- fix abiv2 mmap(... O_SYNC) failure
- fix gdb coredump error
- remove vdsp implement for kernel
- fix qemu failure to bootup sometimes
- fix ftrace call-graph panic
- fix device tree node reference leak
- remove meaningless header-y
- fix save hi,lo,dspcr regs in switch_stack
- remove unused members in processor.h"
* tag 'csky-for-linus-4.21' of git://github.com/c-sky/csky-linux:
csky: Add perf support for C-SKY
csky: Add EM_CSKY_OLD 39
clocksource/drivers/c-sky: fixup ftrace call-graph panic
csky: ftrace call graph supported.
csky: basic ftrace supported
csky: remove unused members in processor.h
csky: optimize kernel panic print.
csky: stacktrace supported.
csky: CPU-hotplug supported for SMP
clocksource/drivers/c-sky: fixup qemu fail to bootup sometimes.
csky: fixup save hi,lo,dspcr regs in switch_stack.
csky: remove syscall_exit_work
csky: fixup remove vdsp implement for kernel.
csky: bugfix gdb coredump error.
csky: fixup abiv2 mmap(... O_SYNC) failed.
csky: define syscall_get_arch()
elf-em.h: add EM_CSKY
csky: remove meaningless header-y
csky: Don't leak device tree node reference
Linus Torvalds [Sat, 5 Jan 2019 17:16:18 +0000 (09:16 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
- procfs updates
- various misc bits
- lib/ updates
- epoll updates
- autofs
- fatfs
- a few more MM bits
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits)
mm/page_io.c: fix polled swap page in
checkpatch: add Co-developed-by to signature tags
docs: fix Co-Developed-by docs
drivers/base/platform.c: kmemleak ignore a known leak
fs: don't open code lru_to_page()
fs/: remove caller signal_pending branch predictions
mm/: remove caller signal_pending branch predictions
arch/arc/mm/fault.c: remove caller signal_pending_branch predictions
kernel/sched/: remove caller signal_pending branch predictions
kernel/locking/mutex.c: remove caller signal_pending branch predictions
mm: select HAVE_MOVE_PMD on x86 for faster mremap
mm: speed up mremap by 20x on large regions
mm: treewide: remove unused address argument from pte_alloc functions
initramfs: cleanup incomplete rootfs
scripts/gdb: fix lx-version string output
kernel/kcov.c: mark write_comp_data() as notrace
kernel/sysctl: add panic_print into sysctl
panic: add options to print system info when panic happens
bfs: extra sanity checking and static inode bitmap
exec: separate MM_ANONPAGES and RLIMIT_STACK accounting
...
Christoph Hellwig [Fri, 4 Jan 2019 17:31:48 +0000 (18:31 +0100)]
dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING for remapped allocations
We need to return a dma_addr_t even if we don't have a kernel mapping.
Do so by consolidating the phys_to_dma call in a single place and jump
to it from all the branches that return successfully.
Fixes:
bfd56cd60521 ("dma-mapping: support highmem in the generic remap allocator")
Reported-by: Liviu Dudau <liviu@dudau.co.uk
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Liviu Dudau <liviu@dudau.co.uk>