drm/amdgpu: Increase soft IH ring size

Retry faults are delegated to soft IH ring and then processed by
deferred worker. Current soft IH ring size PAGE_SIZE can store 128
entries, which may overflow and drop retry faults, causes HW stucks
because the retry fault is not recovered.

Increase soft IH ring size to 8KB, enough to store 256 CAM entries
because we clear the CAM entry after handling the retry fault from soft
ring.

Define macro IH_RING_SIZE and IH_SW_RING_SIZE to remove duplicate
constant.

Show warning message if soft IH ring overflows with CAM enabled because
this should not happen.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: move update_spm_vmid() out of rlc_init()

rlc_init() is part of sw_init() so it should not touch hardware.
Additionally, calling the rlc update_spm_vmid() callback
directly invokes a gfx on/off cycle which could result in
powergating being enabled before hw init is complete.  Split
update_spm_vmid() into an internal implementation for local
use without gfxoff interaction and then the rlc callback
which includes gfxoff handling.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx9: move update_spm_vmid() out of rlc_init()

rlc_init() is part of sw_init() so it should not touch hardware.
Additionally, calling the rlc update_spm_vmid() callback
directly invokes a gfx on/off cycle which could result in
powergating being enabled before hw init is complete.  Split
update_spm_vmid() into an internal implementation for local
use without gfxoff interaction and then the rlc callback
which includes gfxoff handling.  lbpw_init also touches
hardware so mvoe that to rlc_resume as well.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix errors & warnings in gfx_v10_0.c

Fix the below checkpatch errors & warnings:

ERROR: that open brace { should be on the previous line
ERROR: space prohibited before that ',' (ctx:WxV)
ERROR: space required after that ',' (ctx:WxV)
ERROR: code indent should use tabs where possible
ERROR: switch and case should be at the same indent

WARNING: please, no spaces at the start of a line
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: space prohibited before semicolon
WARNING: Block comments use a trailing */ on a separate line
WARNING: Block comments use * on subsequent lines
WARNING: braces {} are not necessary for any arm of this statement
WARNING: Missing a blank line after declarations

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix warnings in gfxhub_ v3_0, v3_0_3.c

Fix the below checkpatch warnings:

WARNING: static const char * array should probably be static const char * const
+static const char *gfxhub_client_ids[] = {

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+       unsigned i;

WARNING: static const char * array should probably be static const char * const
+static const char *gfxhub_client_ids[] = {

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+       unsigned i;

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix warnings in gmc_v8_0.c

Fix below checkpatch warnings:

WARNING: braces {} are not necessary for single statement blocks
WARNING: braces {} are not necessary for any arm of this statement
WARNING: Block comments should align the * on each line

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: avoid restore process run into dead loop.

In restore process worker, pinned BO cause update PTE fail, then
the function re-schedule the restore_work. This will generate dead loop.

Signed-off-by: gaba <gaba@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: disbale dcefclk device sysnode on GFX v9.4.3 chip

v1:
the dceflck sysnode is not aviable on GFX v9.4.3 chip.

v2:
simplify code logic using helper function: amdgpu_device_has_display_hardware().

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vkms: drop redundant set of fb_modifiers_not_supported

Due to a coding typo.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove else after return statement in 'gfx_v10_0_check_grbm_cam_remapping'

Fix below checkpatch warnings:

WARNING: else is not generally useful after a break or return
+                       return true;
+               } else {

WARNING: else is not generally useful after a break or return
+                       return true;
+               } else {

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix smu i2c data read risk

the smu driver_table is used for all types of smu
tables data transcation (e.g: PPtable, Metrics, i2c, Ecc..).

it is necessary to hold this lock to avoiding data tampering
during the i2c read operation.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix warnings in gmc_v11_0.c

Fix below checkpatch warnings:

WARNING: quoted string split across lines
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: void function return statements are not generally useful
WARNING: braces {} are not necessary for any arm of this statement

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove else after return statement in 'gmc_v8_0_check_soft_reset'

Fix below checkpatch warnings:

WARNING: else is not generally useful after a break or return
+               return true;
+       } else {

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix warnings in gfxhub_v2_1.c

Fix the below checkpatch warnings:

WARNING: static const char * array should probably be static const char * const
+static const char *gfxhub_client_ids[] = {

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+       unsigned i;

WARNING: Missing a blank line after declarations
+       int i;
+       adev->gmc.VM_L2_CNTL = RREG32_SOC15(GC, 0, mmGCVM_L2_CNTL);

WARNING: Missing a blank line after declarations
+       int i;
+       WREG32_SOC15(GC, 0, mmGCVM_L2_CNTL, adev->gmc.VM_L2_CNTL);

WARNING: braces {} are not necessary for single statement blocks
+       if (!time) {
+               DRM_WARN("failed to wait for GRBM(EA) idle\n");
+       }

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix errors & warnings in gmc_ v6_0, v7_0.c

Fix below checkpatch errors & warnings:

ERROR: trailing statements should be on next line
+       default: BUG();
ERROR: trailing statements should be on next line

WARNING: braces {} are not necessary for single statement blocks
WARNING: braces {} are not necessary for any arm of this statement
WARNING: Block comments use * on subsequent lines
WARNING: Missing a blank line after declarations
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix warnings in gmc_v10_0.c

Fix below checkpatch warnings:

WARNING: Consider removing the code enclosed by this #if 0 and its #endif
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: quoted string split across lines

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Prefer dev_warn over printk

Fix the below warning:

WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then
dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix warnings in gfxhub_v2_0.c

Fix the below checkpatch warnings:

WARNING: static const char * array should probably be static const char * const
+static const char *gfxhub_client_ids[] = {

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+       unsigned i;

WARNING: Missing a blank line after declarations
+       u32 tmp;
+       tmp = RREG32_SOC15(GC, 0, mmGCVM_L2_PROTECTION_FAULT_CNTL);

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove redundant GFX v9.4.3 sequence

Programming of XCC id is already taken care with partition mode change.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix warnings in gfxhub_ v1_0, v1_2.c

Fix the below checkpatch warnings:

WARNING: Block comments should align the * on each line
+                       /*
+                       * Raven2 has a HW issue that it is unable to use the

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+       unsigned num_level, block_size;

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+       unsigned i;

WARNING: Missing a blank line after declarations
+       u32 tmp;
+       tmp = RREG32_SOC15(GC, 0, mmVM_L2_PROTECTION_FAULT_CNTL);

WARNING: Block comments should align the * on each line
+                               /*
+                               * Raven2 has a HW issue that it is unable to use the

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+       unsigned num_level, block_size;

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Block optimize on consecutive FAMS enables

[WHY]
It is possible to commit state multiple times in rapid succession with
FAMS enabled; if each of these commits were to set optimized_required,
then the user may see latency.

[HOW]
fw_based_mclk_switching is currently not used in dc->clk_mgr; use it
to track whether the current state has FAMS enabled;
if it has, then do not disable FAMS in prepare_bandwidth, and do not set
optimized_required.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Do not set drr on pipe commit

[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a
pipe commit can cause underflow.

[HOW]
Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets
optimized_required.

This change expects that Freesync requests are blocked when
optimized_required is true.

Fixes: 613a7956deb3 ("drm/amd/display: Add monitor specific edid quirk")
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix error & warnings in gmc_v9_0.c

Fix below checkpatch error & warnings:

ERROR: that open brace { should be on the previous line

WARNING: static const char * array should probably be static const char * const
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Change golden settings for GFX v9.4.3

Change the settings applicable for A0. GRBM_MCM_ADDR setting will be
applied by firmware.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Tested-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Skip handle mapping SVM range with no GPU access

If the SVM range has no GPU access nor access-in-place attribute,
validate and map to GPU should skip the range.

Add NULL pointer check if find_first_bit(ctx->bitmap, MAX_GPU_INSTANCE)
returns MAX_GPU_INSTANCE as gpuidx if ctx->bitmap is empty.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Add cu_occupancy sysfs file to GFX9.4.3

Include kgd_gfx_v9_get_cu_occupancy call inside kfd2kgd_calls for
GFX9.4.3 to expose cu_occupancy sysfs file.

Signed-off-by: Sreekant Somasekharan <sreekant.somasekharan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: have bos for PDs/PTS cpu accessible when kfd uses cpu to update vm

When kfd uses cpu to update vm iterates all current PDs/PTs bos, adds
AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED flag and kmap them to kernel virtual
address space before kfd updates the vm that was created by gfx.

Signed-off-by: Xiaogang Chen <Xiaogang.Chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Use KIQ to unmap HIQ

Currently, we unmap HIQ by directly writing to HQD
registers. This doesn't work for GFX9.4.3. Instead,
use KIQ to unmap HIQ, similar to how we use KIQ to
map HIQ. Using KIQ to unmap HIQ works for all GFX
series post GFXv9.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up warnings in amdgpu_dm _mst_types, _plane, _psr.c

Fix the following warnings reported by checkpatch:

WARNING: Missing a blank line after declarations
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'

Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unnecessary casts in amdgpu_dm_helpers.c

Fixes the following category of checkpatch complaints:

WARNING: unnecessary cast may hide bugs, see http://c-faq.com/malloc/mallocnocast.html
+               char *buf = (char *)kvcalloc(total, sizeof(char), GFP_KERNEL);

Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up warnings in amdgpu_dm_pp_smu.c

Fixes the following category of checkpatch warning:

WARNING: Block comments use a trailing */ on a separate line
+                                * non-boosted one. */

WARNING: suspect code indent for conditional statements (8, 24)
+       if ((adev->asic_type >= CHIP_POLARIS10) &&
[...]
+                       return true;

Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip address adjustment for GFX RAS injection

The address parameter of GFX RAS injection isn't related to XGMI node
number, keep it unchanged.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Update invalid PTE flag setting

Update the invalid PTE flag setting with TF enabled.
This is to ensure, in addition to transitioning the
retry fault to a no-retry fault, it also causes the
wavefront to enter the trap handler. With the current
setting, the fault only transitions to a no-retry fault.
Additionally, have 2 sets of invalid PTE settings, one for
TF enabled, the other for TF disabled. The setting with
TF disabled, doesn't work with TF enabled.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: return an error if query_video_caps is not set

Should only be an issue for bring up when the function
pointer is not set, but check it anyway to be safe.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Access gpuvm_export_dmabuf() API to get Dmabuf

Directly invoking the function amdgpu_gem_prime_export() from within
KFD is not correct. By utilizing the KFD API to obtain Dmabuf, the
implementation can prevent the creation of multiple instances of
struct dma_buf.

Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: adjust whitespace for amdgpu_psp.h

Adjust the whitespace to be consistent with the rest of the
`struct psp_context` structure.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Detect IFWI or PD upgrade support in psp_early_init()

Rather than evaluating the IP version for visibility, evaluate it
at the same time as the IP is initialized.

Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Add documentation for how to flash a dGPU

The flashing process for dGPUs uses sysfs files in a
non-obvious way, so document it for users.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Convert USB-C PD F/W attributes into groups

Rather than special casing the creation of the file, special case
the visibility to the supported dGPUs.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Make flashing messages quieter

Debug messages related to the kernel process of flashing an updated
IFWI are needlessly noisy and also confusing.

Downgrade them to debug instead and clarify what they are actually
doing.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Use attribute groups for PSP flashing attributes

Individually creating attributes can be racy, instead make attributes
using attribute groups and control their visibility with an is_visible
callback to only show when using appropriate products.

v2: squash in fix for PSP 13.0.10

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix comment typo

Spell "transmission" properly.

Found by searching for keyword "tranm".

Signed-off-by: Yueh-Shun Li <shamrocklee@posteo.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use seq_puts() in 'amdgpu_current_colorspace_show()' & 'edp_ilr_show()'

Replace seq_printf with seq_puts when there is no argument list.

Fix the checkpatch warning:
WARNING: Prefer seq_puts to seq_printf

Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove redundant braces in 'amdgpu_dm_crtc_notify_ta_to_read()'

Adhere to Linux kernel coding style.

Reported by checkpatch:

WARNING: braces {} are not necessary for single statement blocks

Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up style problems in amdgpu_dm_irq.c

Fix the following warnings reported by checkpatch:

WARNING: Block comments use a trailing */ on a separate line
WARNING: Comparisons should place the constant on the right side of the test
WARNING: space prohibited between function name and open parenthesis '('
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'

Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove else after return in 'dm_crtc_get_scanoutpos()'

Conform to Linux kernel coding style.

Reported by checkpatch:

WARNING: else is not generally useful after a break or return

Expressions under 'else' branch in function 'dm_crtc_get_scanoutpos' are
executed whenever the expression in 'if' is False. Otherwise, return
from function occurs. Therefore, there is no need in 'else', and it has
been removed.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove else after return statement in 'dm_update_plane_state'

Else is not necessary after return statements, hence remove it.

Reported by checkpatch:

WARNING: else is not generally useful after a break or return
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:9776:
                               return -EINVAL;
                       else

Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up errors & warnings in amdgpu_dm.c

Fix the following errors & warnings reported by checkpatch:

ERROR: space required before the open brace '{'
ERROR: space required before the open parenthesis '('
ERROR: that open brace { should be on the previous line
ERROR: space prohibited before that ',' (ctx:WxW)
ERROR: else should follow close brace '}'
ERROR: open brace '{' following function definitions go on the next line
ERROR: code indent should use tabs where possible

WARNING: braces {} are not necessary for single statement blocks
WARNING: void function return statements are not generally useful
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line

Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Rename aqua_vanjaram_reg_init.c

This contains SOC specific functions, rename to a more generic format
<soc>.c => aqua_vanjaram.c

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-misc-next-fixes-2023-07-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes pull:

 * panel: Fix mode on Starry-ili9882t

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706112203.GA30555@linux-uq9g

Merge tag 'drm-intel-next-fixes-2023-07-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Fix BDW PSR AUX CH data register offsets [psr] (Ville Syrjälä)
- Use mock device info for creating mock device (Jani Nikula)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZKZ6VIeInBYrBuph@tursulin-desk

Merge tag 'amd-drm-fixes-6.5-2023-06-30-1' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-6.5-2023-06-30-1:

amdgpu:
- Misc cleanups
- GFX 9.4.3 fixes
- DEBUGFS build fix
- Fix LPDDR5 reporting
- ASPM fixes
- DCN 3.1.4 fixes
- DP MST fixes
- DCN 3.2.x fixes
- Display PSR TCON fixes
- SMU 13.x fixes
- RAS fixes
- Vega12/20 SMU fixes
- PSP flashing cleanup
- GFX9 MCBP fixes
- SR-IOV fixes
- GPUVM clear mappings fix for always valid BOs
- Add FAMS quirk for problematic monitor
- Fix possible UAF
- Better handle monentary temperature fluctuations
- SDMA 4.4.2 fixes
- Fencing fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630175757.8128-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-fixes-2023-06-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Allow DC states along with PW2 only for PWB functionality [adlp+] (Imre Deak)
- Fix SSC selection for MPLLA [mtl] (Radhakrishna Sripada)
- Use hw.adjusted mode when calculating io/fast wake times [psr] (Jouni Högander)
- Apply min softlimit correctly [guc/slpc] (Vinay Belgaumkar)
- Assign correct hdcp content type [hdcp] (Suraj Kandpal)
- Add missing forward declarations/includes to display power headers (Imre Deak)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZJ1WpY+GF9NcsWXp@tursulin-desk

Merge tag 'drm-misc-next-fixes-2023-06-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes pull:

 * fbdev: Fix module infos on sparc

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230629113814.GA10448@linux-uq9g

drm/i915: use mock device info for creating mock device

Instead of modifying the device info on the fly, use static const mock
device info.

It's not okay to modify device info at runtime; we've added separate
runtime info for info that needs to be modified at runtime. We've added
safeguards to device info to prevent it from being modified, but commit
5e352e32aec2 ("drm/i915: preparation for using PAT index") just cast the
const away and modified it anyway. This prevents device info from being
moved to rodata.

Fixes: 5e352e32aec2 ("drm/i915: preparation for using PAT index")
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b0db62045a96a3fd4cf123685da88cc777f9b485.1687878757.git.jani.nikula@intel.com
(cherry picked from commit ecc7a3ce078a209a62af4c53ffb7370620f65c24)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/psr: Fix BDW PSR AUX CH data register offsets

The multiplication got replaced by an addition in some cleanup.
This means we never write the correct data to some of the BDW
PSR data registers and thus we fail to actually wake up the
panel from PSR.

Fixes: 4ab4fa103217 ("drm/i915/psr: Make PSR registers relative to transcoders")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609141404.12729-3-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
(cherry picked from commit 460dc4ba1442b3e5e543328d11db2702b98d3d7c)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/amdgpu: Fix potential fence use-after-free v2

fence Decrements the reference count before exiting.
Avoid Race Vulnerabilities for fence use-after-free.

v2 (chk): actually fix the use after free and not just move it.

Signed-off-by: shanzhulig <shanzhulig@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: avoid unintentional shutdown due to temperature momentary fluctuation

An intentional delay is added on soft ctf triggered. Then there will
be a double check for the GPU temperature before taking further
action. This can avoid unintended shutdown due to temperature
momentary fluctuation.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: expose swctf threshold setting for legacy powerplay

Preparation for coming optimization which eliminates the influence of
GPU temperature momentary fluctuation.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.241

This version brings along the following:

- Improve debugging mechanism for Gaming FAMS
- Add monitor specific edid quirks
- Fixes for Phantom pipe
- Fixes for Shapper LUT
- Clean up asserts

Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Take full update path if number of planes changed

[Description]
- A full update is required if the number of planes for a given
  stream changes
- The new fast update path only checked for stream and plane updates,
  but there could be a plane addition or removal without one of the
  stream and plane updates triggering a full update
- Add an explicit check for number of planes changing for a full update

Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Create debugging mechanism for Gaming FAMS

[WHY]
To enable FAMS even during gaming sessions.

[HOW]
By leveraging a new dc.debug parameter.

Reviewed-by: Felipe Clark <felipe.clark@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Gianna Binder <gianna.binder@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add monitor specific edid quirk

Disable FAMS on a Samsung Odyssey G9 monitor. Experiments show that this
monitor does not work well under some use cases, and is likely
implementation specific bug on the monitor's firmware.

Cc: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: For new fast update path, loop through each surface

[Description]
- Previous implementation didn't consider multiple surfaces in a flip
- Loop through each surface in each flip to ensure the update path is
  correct

Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove Phantom Pipe Check When Calculating K1 and K2

[Why]
K1 and K2 not being setting properly when subVP is active.

[How]
Have phantom pipes use the same programing as the main pipes without
checking the paired stream

Cc: stable@vger.kernel.org
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Limit new fast update path to addr and gamma / color

[Description]
- We want to limit the new fast update path to address and gamma updates
  only.
- Add a check in dc_update_planes_and_stream to only take the new fast
  update path if we only have the specific fast updates defined.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix the delta clamping for shaper LUT

The shaper LUT requires a 10-bit value of the delta between segments. We
were using dc_fixpt_clamp_u0d10() to do that but it doesn't do what we
want it to do. It will preserve 10-bit precision after the decimal
point, but that's not quite what we want. We want 14-bit precision and
discard the 4 most-significant bytes.

To do that we'll do dc_fixpt_clamp_u0d14() & 0x3ff instead.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Keep non-psp path for partition switch

When PSP block is not present, use direct programming.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Tested-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: program DPP shaper and 3D LUT if updated

If shaper and 3D LUT data updates, lut_3d bit in update_flag is updated
and we need to call set_input_transfer_func to program DPP shaper and 3D
LUTs. Small cleanup of code style in the related if-condition.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: edp do not add non-edid timings"

This change causes regression when eDP and external display in mirror
mode. When external display supports low resolution than eDP, use eDP
timing to driver external display may cause corruption on external
display.

This reverts commit e749dd10e5f292061ad63d2b030194bf7d7d452c.

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2655
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: share drm device for pci amdgpu device with 1st partition device

To save render node resoure, share drm device setting for pci amdgpu
device with 1st XCP partition device.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Add GFX v9.4.3 unique id to sysfs

Expose unique id of GFX v9.4.3 ASICs as device attribute.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Enable pp_feature attribute

on APUs with GFX v9.4.3

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: Need to unpause dpg before stop dpg

Need to unpause dpg first, or it will hit follow error during stop dpg:
"[drm] Register(1) [regUVD_POWER_STATUS] failed to reach value 0x00000001 != 0x00000000n"

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove duplicated doorbell range init for sdma v4.4.2

Handled in earlier phase

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: gpu recovers from fatal error in poison mode

Fatal error occurs in ras poison mode, mode1 reset
is used to recover gpu.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable mcbp by default on gfx9

It's required for high priority queues.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2535
Reviewed-and-tested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make mcbp a per device setting

So we can selectively enable it on certain devices.  No
intended functional change.

Reviewed-and-tested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Don't initialize PSP twice for Navi3x

PSP functions are already set by psp_early_init() so initializing
them a second time is unnecessary.
No intended functional changes.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd: Disable PSR-SU on Parade 0803 TCON"

This reverts commit 072030b1783056b5de8b0fac5303a5e9dbc6cfde.
This is no longer necessary when using newer DMUB F/W.

Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set minimum requirement for using PSR-SU on Phoenix

The same parade TCON issue can potentially happen on Phoenix, and the same
PSR resilience changes have been ported into the DMUB firmware.

Don't allow running PSR-SU unless on the newer firmware.

Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set minimum requirement for using PSR-SU on Rembrandt

A number of parade TCONs are causing system hangs when utilized with
older DMUB firmware and PSR-SU. Some changes have been introduced into
DMUB firmware to add resilience against these failures.

Don't allow running PSR-SU unless on the newer firmware.

Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2443
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Correct `DMUB_FW_VERSION` macro

The `DMUB_FW_VERSION` macro has a mistake in that the revision field
is off by one byte. The last byte is typically used for other purposes
and not a revision.

Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fulfill the missing enablement for vega12/vega20 L2H and H2L interrupts

The feature mask bit was not correctly cleared. Without that, the L2H
and H2L interrupts cannot be enabled.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove asserts

[why]
Endless assert caused by LinesInDETChroma=0.

[how]
Don't floor for LinesInDETChroma=0

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Hong-lu Cheng <hong-lu.cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Work around bad DPCD state on link loss

[Why]
This display doesn't properly indicate link loss through DPCD bits such
as CR_DONE / CHANNEL_EQ_DONE / SYMBOL_LOCKED / INTERLANE_ALIGN_DONE,
which all remain set.

In addition, DPCD200Eh doesn't match the value of DPCD204h in all cases.

For these reasons, we can miss re-training the link, since we don't
properly detect link loss with this display.

[Why]
Add display-specific workaround to read DPCD204h, so that we can detect
link loss based on 128b132b-specific status bits in this register.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: port SRIOV VF missed changes

port SRIOV VF missed changes from gfx_v9_0 to gfx_v9_4_3.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Don't try to enable secure display TA multiple times

If the securedisplay TA failed to load the first time, it's unlikely
to work again after a suspend/resume cycle or reset cycle and it appears
to be causing problems in futher attempts.

Fixes: e42dfa66d592 ("drm/amdgpu: Add secure display TA load for Renoir")
Reported-by: Filip Hejsek <filip.hejsek@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2633
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Update interrupt handling for GFX 9.4.3

For GFX 9.4.3, interrupt handling needs to be updated for:
- Interrupt cookie will have a NodeId field. Each KFD
  node needs to check the NodeId before processing the
  interrupt.
- For CPX mode, there are additional checks of client ID
  needed to process the interrupt.
- Add NodeId to the process drain interrupt.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix number of fence calculations

Since adding gang submit we need to take the gang size into account
while reserving fences.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 4624459c84d7 ("drm/amdgpu: add gang submit frontend v6")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: perform a bounds check before filling dirty rectangles

Currently, it is possible for us to access memory that we shouldn't.
Since, we acquire (possibly dangling) pointers to dirty rectangles
before doing a bounds check to make sure we can actually accommodate the
number of dirty rectangles userspace has requested to fill. This issue
is especially evident if a compositor requests both MPO and damage clips
at the same time, in which case I have observed a soft-hang. So, to
avoid this issue, perform the bounds check before filling a single dirty
rectangle and WARN() about it, if it is ever attempted in
fill_dc_dirty_rect().

Cc: stable@vger.kernel.org # 6.1+
Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Provide energy data in 15.625mJ units

Publish energy data in 15.625mJ unit for SMU v13.0.6. The same unit is
used in Aldebaran also.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Modify for_each_inst macro

Modify it such that it doesn't change the instance mask parameter.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:Remove sdma halt/unhalt during frontdoor load

sdma halt/unhalt is performed by psp when frontdoor
loading used,so this can be skipped.

v2: Instead of removing halt/unhalt completely,
    driver will do it only during backdoor load.

Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: check RAS irq existence for VCN/JPEG

No RAS irq is allowed.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add abnormal fan detection for smu 13.0.0

add abnormal fan detection for smu 13.0.0

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove vm sanity check from amdgpu_vm_make_compute

Since we allow kfd and graphic operate on same GPU VM to have interoperation
between them GPU VM may have been used by graphic vm operations before kfd turns
a GPU VM into a compute VM. Remove vm clean checking at amdgpu_vm_make_compute.

Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Disable PSR-SU on Parade 0803 TCON

A number of users have reported that there are random hangs occurring
caused by PSR-SU specifically on panels that contain the parade 0803
TCON.  Users have been able to work around the issue by disabling PSR
entirely.

To avoid these hangs, disable PSR-SU when this TCON is found.

Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Suggested-by: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2443
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Enable GWS on GFX9.4.3

Enable GWS capable queue creation for forward
progress gaurantee on GFX 9.4.3.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/panel: Fine tune Starry-ili9882t panel HFP and HBP

Because the setting of hporch is too small, there will be warning in
kernel log[1]. After fine tune the HFP and HBP, this warning can be
solved. The actual measurement frame rate is 60.1Hz.

[1]: WARNING kernel:[drm] HFP + HBP less than d-phy, FPS will under 60Hz

Fixes: 8716a6473e6c ("drm/panel: Support for Starry-ili9882t TDDI MIPI-DSI panel")
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230627050148.2045691-1-yangcong5@huaqin.corp-partner.google.com