OSDN Git Service
Junio C Hamano [Fri, 28 Oct 2016 16:01:13 +0000 (09:01 -0700)]
Merge branch 'dp/autoconf-curl-ssl' into maint
The ./configure script generated from configure.ac was taught how
to detect support of SSL by libcurl better.
* dp/autoconf-curl-ssl:
./configure.ac: detect SSL in libcurl using curl-config
Junio C Hamano [Fri, 28 Oct 2016 16:01:13 +0000 (09:01 -0700)]
Merge branch 'ak/curl-imap-send-explicit-scheme' into maint
When we started cURL to talk to imap server when a new enough
version of cURL library is available, we forgot to explicitly add
imap(s):// before the destination. To some folks, that didn't work
and the library tried to make HTTP(s) requests instead.
* ak/curl-imap-send-explicit-scheme:
imap-send: Tell cURL to use imap:// or imaps://
Junio C Hamano [Fri, 28 Oct 2016 16:01:12 +0000 (09:01 -0700)]
Merge branch 'jt/fetch-pack-in-vain-count-with-stateless' into maint
When "git fetch" tries to find where the history of the repository
it runs in has diverged from what the other side has, it has a
mechanism to avoid digging too deep into irrelevant side branches.
This however did not work well over the "smart-http" transport due
to a design bug, which has been fixed.
* jt/fetch-pack-in-vain-count-with-stateless:
fetch-pack: do not reset in_vain on non-novel acks
Junio C Hamano [Fri, 28 Oct 2016 16:01:12 +0000 (09:01 -0700)]
Merge branch 'js/regexec-buf' into maint
A follow-up to an already graduated topic.
* js/regexec-buf:
configure.ac: improve description of NO_REGEX test
Junio C Hamano [Fri, 28 Oct 2016 16:01:11 +0000 (09:01 -0700)]
Merge branch 'rs/c-auto-resets-attributes' into maint
When "%C(auto)" appears at the very beginning of the pretty format
string, it did not need to issue the reset sequence, but it did.
This is a small optimization to already graduated topic.
* rs/c-auto-resets-attributes:
pretty: avoid adding reset for %C(auto) if output is empty
pretty: let %C(auto) reset all attributes
Junio C Hamano [Fri, 28 Oct 2016 16:01:10 +0000 (09:01 -0700)]
Merge branch 'yk/git-tag-remove-mention-of-old-layout-in-doc' into maint
Shorten description of auto-following in "git tag" by removing a
mention of historical remotes layout which is not relevant to the
main topic.
* yk/git-tag-remove-mention-of-old-layout-in-doc:
doc: remove reference to the traditional layout in git-tag.txt
Younes Khoudli [Thu, 20 Oct 2016 13:21:44 +0000 (15:21 +0200)]
doc: remove reference to the traditional layout in git-tag.txt
This is the only place in the documentation that the traditional layout
is mentioned, and it is confusing. Remove it.
* Documentation/git-tag.txt: Here.
Signed-off-by: Younes Khoudli <younes.khoudli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 17 Oct 2016 20:27:38 +0000 (13:27 -0700)]
Merge tag 'l10n-2.10.0-rnd2.4' of git://github.com/git-l10n/git-po into maint
l10n-2.10.0-rnd2.4
* tag 'l10n-2.10.0-rnd2.4' of git://github.com/git-l10n/git-po:
l10n: de.po: translate 260 new messages
l10n: de.po: fix translation of autostash
l10n: ru.po: update Russian translation
Jiang Xin [Sun, 16 Oct 2016 12:11:41 +0000 (20:11 +0800)]
Merge branch 'russian-l10n' of https://github.com/DJm00n/git-po-ru
* 'russian-l10n' of https://github.com/DJm00n/git-po-ru:
l10n: ru.po: update Russian translation
Ralf Thielow [Wed, 12 Oct 2016 16:31:13 +0000 (18:31 +0200)]
l10n: de.po: translate 260 new messages
Translate 260 new message came from git.pot updates in
9fa976f (l10n:
git.pot: v2.10.0 round 1 (248 new, 56 removed)) and
5bd166d (l10n:
git.pot: v2.10.0 round 2 (12 new, 44 removed)).
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Matthias Rüster <matthias.ruester@gmail.com>
Junio C Hamano [Tue, 11 Oct 2016 21:24:02 +0000 (14:24 -0700)]
Start preparing for 2.10.2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 11 Oct 2016 21:21:35 +0000 (14:21 -0700)]
Merge branch 'jk/verify-packfile-gently' into maint
A low-level function verify_packfile() was meant to show errors
that were detected without dying itself, but under some conditions
it didn't and died instead, which has been fixed.
* jk/verify-packfile-gently:
verify_packfile: check pack validity before accessing data
Junio C Hamano [Tue, 11 Oct 2016 21:21:17 +0000 (14:21 -0700)]
Merge branch 'jc/worktree-config' into maint
"git worktree", even though it used the default_abbrev setting that
ought to be affected by core.abbrev configuration variable, ignored
the variable setting. The command has been taught to read the
default set of configuration variables to correct this.
* jc/worktree-config:
worktree: honor configuration variables
Junio C Hamano [Tue, 11 Oct 2016 21:21:03 +0000 (14:21 -0700)]
Merge branch 'jc/verify-loose-object-header' into maint
Codepaths that read from an on-disk loose object were too loose in
validating what they are reading is a proper object file and
sometimes read past the data they read from the disk, which has
been corrected. H/t to Gustavo Grieco for reporting.
* jc/verify-loose-object-header:
unpack_sha1_header(): detect malformed object header
streaming: make sure to notice corrupt object
Junio C Hamano [Tue, 11 Oct 2016 21:20:37 +0000 (14:20 -0700)]
Merge branch 'rs/git-gui-use-modern-git-merge-syntax' into maint
The original command line syntax for "git merge", which was "git
merge <msg> HEAD <parent>...", has been deprecated for quite some
time, and "git gui" was the last in-tree user of the syntax. This
is finally fixed, so that we can move forward with the deprecation.
* rs/git-gui-use-modern-git-merge-syntax:
git-gui: stop using deprecated merge syntax
Junio C Hamano [Tue, 11 Oct 2016 21:20:31 +0000 (14:20 -0700)]
Merge branch 'kd/mailinfo-quoted-string' into maint
An author name, that spelled a backslash-quoted double quote in the
human readable part "My \"double quoted\" name", was not unquoted
correctly while applying a patch from a piece of e-mail.
* kd/mailinfo-quoted-string:
mailinfo: unescape quoted-pair in header fields
t5100-mailinfo: replace common path prefix with variable
Junio C Hamano [Tue, 11 Oct 2016 21:20:05 +0000 (14:20 -0700)]
Merge branch 'pb/rev-list-reverse-with-count' into maint
Doc update to clarify what "log -3 --reverse" does.
* pb/rev-list-reverse-with-count:
rev-list-options: clarify the usage of --reverse
Junio C Hamano [Tue, 11 Oct 2016 21:19:52 +0000 (14:19 -0700)]
Merge branch 'jc/blame-abbrev' into maint
Almost everybody uses DEFAULT_ABBREV to refer to the default
setting for the abbreviation, but "git blame" peeked into
underlying variable bypassing the macro for no good reason.
* jc/blame-abbrev:
blame: use DEFAULT_ABBREV macro
Junio C Hamano [Tue, 11 Oct 2016 21:19:03 +0000 (14:19 -0700)]
Merge branch 'jk/graph-padding-fix' into maint
The "graph" API used in "git log --graph" miscounted the number of
output columns consumed so far when drawing a padding line, which
has been fixed; this did not affect any existing code as nobody
tried to write anything after the padding on such a line, though.
* jk/graph-padding-fix:
graph: fix extra spaces in graph_padding_line
Junio C Hamano [Tue, 11 Oct 2016 21:18:57 +0000 (14:18 -0700)]
Merge branch 'sg/ref-filter-parse-optim' into maint
The code that parses the format parameter of for-each-ref command
has seen a micro-optimization.
* sg/ref-filter-parse-optim:
ref-filter: strip format option after a field name only once while parsing
Junio C Hamano [Tue, 11 Oct 2016 21:18:32 +0000 (14:18 -0700)]
Merge branch 'rs/copy-array' into maint
Code cleanup.
* rs/copy-array:
use COPY_ARRAY
add COPY_ARRAY
Junio C Hamano [Tue, 11 Oct 2016 21:17:52 +0000 (14:17 -0700)]
Merge branch 'dt/mailinfo' into maint
* dt/mailinfo:
add David Turner's Two Sigma address
Jakub Narębski [Fri, 7 Oct 2016 11:30:52 +0000 (13:30 +0200)]
configure.ac: improve description of NO_REGEX test
The commit
2f8952250a ("regex: add regexec_buf() that can work on a
non NUL-terminated string", 2016-09-21) changed description of
NO_REGEX build config variable to be more neutral, and actually say
that it is about support for REG_STARTEND. Change description in
configure.ac to match.
Change also the test message and variable name to match. The test
just checks that REG_STARTEND is #defined.
Issue-found-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 3 Oct 2016 20:24:18 +0000 (13:24 -0700)]
Git 2.10.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 3 Oct 2016 20:22:32 +0000 (13:22 -0700)]
Merge branch 'jk/ident-ai-canonname-could-be-null' into maint
In the codepath that comes up with the hostname to be used in an
e-mail when the user didn't tell us, we looked at ai_canonname
field in struct addrinfo without making sure it is not NULL first.
* jk/ident-ai-canonname-could-be-null:
ident: handle NULL ai_canonname
Junio C Hamano [Mon, 3 Oct 2016 20:22:25 +0000 (13:22 -0700)]
Merge branch 'jk/doc-cvs-update' into maint
Documentation around tools to import from CVS was fairly outdated.
* jk/doc-cvs-update:
docs/cvs-migration: mention cvsimport caveats
docs/cvs-migration: update link to cvsps homepage
docs/cvsimport: prefer cvs-fast-export to parsecvs
Junio C Hamano [Mon, 3 Oct 2016 20:22:13 +0000 (13:22 -0700)]
Merge branch 'jk/pack-tag-of-tag' into maint
"git pack-objects --include-tag" was taught that when we know that
we are sending an object C, we want a tag B that directly points at
C but also a tag A that points at the tag B. We used to miss the
intermediate tag B in some cases.
* jk/pack-tag-of-tag:
pack-objects: walk tag chains for --include-tag
t5305: simplify packname handling
t5305: use "git -C"
t5305: drop "dry-run" of unpack-objects
t5305: move cleanup into test block
SZEDER Gábor [Sun, 2 Oct 2016 16:35:11 +0000 (18:35 +0200)]
ref-filter: strip format option after a field name only once while parsing
When parse_ref_filter_atom() iterates over a list of valid atoms to
check that a field name is one of them, it has to strip the optional
colon-separated format option suffix that might follow the field name.
However, it does so inside the loop, i.e. it performs the exact same
stripping over and over again.
Move stripping the format option suffix out of that loop, so it's only
performed once for each parsed field name.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Thu, 29 Sep 2016 18:13:05 +0000 (20:13 +0200)]
pretty: avoid adding reset for %C(auto) if output is empty
We emit an escape sequence for resetting color and attribute for
%C(auto) to make sure automatic coloring is displayed as intended.
Stop doing that if the output strbuf is empty, i.e. when %C(auto)
appears at the start of the format string, because then there is no
need for a reset and we save a few bytes in the output.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 29 Sep 2016 23:51:09 +0000 (16:51 -0700)]
Prepare for 2.10.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 29 Sep 2016 23:49:47 +0000 (16:49 -0700)]
Merge branch 'tg/add-chmod+x-fix' into maint
"git add --chmod=+x <pathspec>" added recently only toggled the
executable bit for paths that are either new or modified. This has
been corrected to flip the executable bit for all paths that match
the given pathspec.
* tg/add-chmod+x-fix:
t3700-add: do not check working tree file mode without POSIXPERM
t3700-add: create subdirectory gently
add: modify already added files when --chmod is given
read-cache: introduce chmod_index_entry
update-index: add test for chmod flags
Junio C Hamano [Thu, 29 Sep 2016 23:49:46 +0000 (16:49 -0700)]
Merge branch 'et/add-chmod-x' into maint
"git add --chmod=+x" added recently lacked documentation, which has
been corrected.
* et/add-chmod-x:
add: document the chmod option
Junio C Hamano [Thu, 29 Sep 2016 23:49:46 +0000 (16:49 -0700)]
Merge branch 'rt/rebase-i-broken-insn-advise' into maint
When "git rebase -i" is given a broken instruction, it told the
user to fix it with "--edit-todo", but didn't say what the step
after that was (i.e. "--continue").
* rt/rebase-i-broken-insn-advise:
rebase -i: improve advice on bad instruction lines
Junio C Hamano [Thu, 29 Sep 2016 23:49:45 +0000 (16:49 -0700)]
Merge branch 'ls/travis-homebrew-path-fix' into maint
The procedure to build Git on Mac OS X for Travis CI hardcoded the
internal directory structure we assumed HomeBrew uses, which was a
no-no. The procedure has been updated to ask HomeBrew things we
need to know to fix this.
* ls/travis-homebrew-path-fix:
travis-ci: ask homebrew for its path instead of hardcoding it
Junio C Hamano [Thu, 29 Sep 2016 23:49:44 +0000 (16:49 -0700)]
Merge branch 'js/regexec-buf' into maint
Some codepaths in "git diff" used regexec(3) on a buffer that was
mmap(2)ed, which may not have a terminating NUL, leading to a read
beyond the end of the mapped region. This was fixed by introducing
a regexec_buf() helper that takes a <ptr,len> pair with REG_STARTEND
extension.
* js/regexec-buf:
regex: use regexec_buf()
regex: add regexec_buf() that can work on a non NUL-terminated string
regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails
Junio C Hamano [Thu, 29 Sep 2016 23:49:43 +0000 (16:49 -0700)]
Merge branch 'nd/checkout-disambiguation' into maint
"git checkout <word>" does not follow the usual disambiguation
rules when the <word> can be both a rev and a path, to allow
checking out a branch 'foo' in a project that happens to have a
file 'foo' in the working tree without having to disambiguate.
This was poorly documented and the check was incorrect when the
command was run from a subdirectory.
* nd/checkout-disambiguation:
checkout: fix ambiguity check in subdir
checkout.txt: document a common case that ignores ambiguation rules
checkout: add some spaces between code and comment
Junio C Hamano [Thu, 29 Sep 2016 23:49:43 +0000 (16:49 -0700)]
Merge branch 'ep/doc-check-ref-format-example' into maint
A shell script example in check-ref-format documentation has been
fixed.
* ep/doc-check-ref-format-example:
git-check-ref-format.txt: fixup documentation
Junio C Hamano [Thu, 29 Sep 2016 23:49:42 +0000 (16:49 -0700)]
Merge branch 'mm/config-color-ui-default-to-auto' into maint
Documentation for individual configuration variables to control use
of color (like `color.grep`) said that their default value is
'false', instead of saying their default is taken from `color.ui`.
When we updated the default value for color.ui from 'false' to
'auto' quite a while ago, all of them broke. This has been
corrected.
* mm/config-color-ui-default-to-auto:
Documentation/config: default for color.* is color.ui
Junio C Hamano [Thu, 29 Sep 2016 23:49:42 +0000 (16:49 -0700)]
Merge branch 'jk/reduce-gc-aggressive-depth' into maint
"git gc --aggressive" used to limit the delta-chain length to 250,
which is way too deep for gaining additional space savings and is
detrimental for runtime performance. The limit has been reduced to
50.
* jk/reduce-gc-aggressive-depth:
gc: default aggressive depth to 50
Junio C Hamano [Thu, 29 Sep 2016 23:49:41 +0000 (16:49 -0700)]
Merge branch 'jk/rebase-i-drop-ident-check' into maint
Even when "git pull --rebase=preserve" (and the underlying "git
rebase --preserve") can complete without creating any new commit
(i.e. fast-forwards), it still insisted on having a usable ident
information (read: user.email is set correctly), which was less
than nice. As the underlying commands used inside "git rebase"
would fail with a more meaningful error message and advice text
when the bogus ident matters, this extra check was removed.
* jk/rebase-i-drop-ident-check:
rebase-interactive: drop early check for valid ident
Junio C Hamano [Thu, 29 Sep 2016 23:49:40 +0000 (16:49 -0700)]
Merge branch 'jt/format-patch-base-info-above-sig' into maint
"git format-patch --base=..." feature that was recently added
showed the base commit information after "-- " e-mail signature
line, which turned out to be inconvenient. The base information
has been moved above the signature line.
* jt/format-patch-base-info-above-sig:
format-patch: show base info before email signature
Junio C Hamano [Thu, 29 Sep 2016 23:49:40 +0000 (16:49 -0700)]
Merge branch 'ks/perf-build-with-autoconf' into maint
Performance tests done via "t/perf" did not use the same set of
build configuration if the user relied on autoconf generated
configuration.
* ks/perf-build-with-autoconf:
t/perf/run: copy config.mak.autogen & friends to build area
Junio C Hamano [Thu, 29 Sep 2016 23:49:39 +0000 (16:49 -0700)]
Merge branch 'rs/xdiff-merge-overlapping-hunks-for-W-context' into maint
"git diff -W" output needs to extend the context backward to
include the header line of the current function and also forward to
include the body of the entire current function up to the header
line of the next one. This process may have to merge to adjacent
hunks, but the code forgot to do so in some cases.
* rs/xdiff-merge-overlapping-hunks-for-W-context:
xdiff: fix merging of hunks with -W context and -u context
Junio C Hamano [Thu, 29 Sep 2016 23:49:39 +0000 (16:49 -0700)]
Merge branch 'ew/http-do-not-forget-to-call-curl-multi-remove-handle' into maint
The http transport (with curl-multi option, which is the default
these days) failed to remove curl-easy handle from a curlm session,
which led to unnecessary API failures.
* ew/http-do-not-forget-to-call-curl-multi-remove-handle:
http: always remove curl easy from curlm session on release
http: consolidate #ifdefs for curl_multi_remove_handle
http: warn on curl_multi_add_handle failures
Junio C Hamano [Thu, 29 Sep 2016 23:49:38 +0000 (16:49 -0700)]
Merge branch 'jk/patch-ids-no-merges' into maint
"git log --cherry-pick" used to include merge commits as candidates
to be matched up with other commits, resulting a lot of wasted time.
The patch-id generation logic has been updated to ignore merges to
avoid the wastage.
* jk/patch-ids-no-merges:
patch-ids: refuse to compute patch-id for merge commit
patch-ids: turn off rename detection
Junio C Hamano [Thu, 29 Sep 2016 23:49:38 +0000 (16:49 -0700)]
Merge branch 'js/git-gui-commit-gpgsign' into maint
"git commit-tree" stopped reading commit.gpgsign configuration
variable that was meant for Porcelain "git commit" in Git 2.9; we
forgot to update "git gui" to look at the configuration to match
this change.
* js/git-gui-commit-gpgsign:
git-gui: respect commit.gpgsign again
Junio C Hamano [Thu, 29 Sep 2016 23:49:38 +0000 (16:49 -0700)]
Merge branch 'jk/fix-remote-curl-url-wo-proto' into maint
"git fetch http::/site/path" did not die correctly and segfaulted
instead.
* jk/fix-remote-curl-url-wo-proto:
remote-curl: handle URLs without protocol
Junio C Hamano [Thu, 29 Sep 2016 23:49:37 +0000 (16:49 -0700)]
Merge branch 'sy/git-gui-i18n-ja' into maint
Update Japanese translation for "git-gui".
* sy/git-gui-i18n-ja:
git-gui: update Japanese information
git-gui: update Japanese translation
git-gui: add Japanese language code
git-gui: apply po template to Japanese translation
git-gui: consistently use the same word for "blame" in Japanese
git-gui: consistently use the same word for "remote" in Japanese
Junio C Hamano [Thu, 29 Sep 2016 23:49:37 +0000 (16:49 -0700)]
Merge branch 'mr/vcs-svn-printf-ulong' into maint
Code cleanup.
* mr/vcs-svn-printf-ulong:
vcs-svn/fast_export: fix timestamp fmt specifiers
Junio C Hamano [Thu, 29 Sep 2016 23:49:36 +0000 (16:49 -0700)]
Merge branch 'rs/unpack-trees-reduce-file-scope-global' into maint
Code cleanup.
* rs/unpack-trees-reduce-file-scope-global:
unpack-trees: pass checkout state explicitly to check_updates()
Junio C Hamano [Thu, 29 Sep 2016 23:49:35 +0000 (16:49 -0700)]
Merge branch 'rs/strbuf-remove-fix' into maint
Code cleanup.
* rs/strbuf-remove-fix:
strbuf: use valid pointer in strbuf_remove()
Junio C Hamano [Thu, 29 Sep 2016 23:49:35 +0000 (16:49 -0700)]
Merge branch 'rs/checkout-some-states-are-const' into maint
Code cleanup.
* rs/checkout-some-states-are-const:
checkout: constify parameters of checkout_stage() and checkout_merged()
Junio C Hamano [Thu, 29 Sep 2016 23:49:34 +0000 (16:49 -0700)]
Merge branch 'bw/pathspec-remove-unused-extern-decl' into maint
Code cleanup.
* bw/pathspec-remove-unused-extern-decl:
pathspec: remove unnecessary function prototypes
Jeff King [Thu, 29 Sep 2016 08:37:51 +0000 (04:37 -0400)]
graph: fix extra spaces in graph_padding_line
The graph_padding_line() function outputs a series of "|"
columns, and then pads with spaces to graph->width by
calling graph_pad_horizontally(). However, we tell the
latter that we wrote graph->num_columns characters, which is
not true; we also needed spaces between the columns. Let's
keep a count of how many characters we've written, which is
what all the other callers of graph_pad_horizontally() do.
Without this, any output that is written at the end of a
padding line will be bumped out by at least an extra
graph->num_columns spaces. Presumably nobody ever noticed
the bug because there's no code path that actually writes to
the end of a padding line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 28 Sep 2016 21:56:00 +0000 (14:56 -0700)]
blame: use DEFAULT_ABBREV macro
This does not make any practical difference in today's code, but
everybody else accesses the default abbreviation length via the
DEFAULT_ABBREV macro. Make sure this oddball codepath does not
stray from the convention.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kevin Daudt [Wed, 28 Sep 2016 19:52:32 +0000 (21:52 +0200)]
mailinfo: unescape quoted-pair in header fields
rfc2822 has provisions for quoted strings in structured header fields,
but also allows for escaping these with so-called quoted-pairs.
The only thing git currently does is removing exterior quotes, but
quotes within are left alone.
Remove exterior quotes and remove escape characters so that they don't
show up in the author field.
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kevin Daudt [Wed, 28 Sep 2016 19:52:31 +0000 (21:52 +0200)]
t5100-mailinfo: replace common path prefix with variable
Many tests need to store data in a file, and repeat the same pattern to
refer to that path:
"$TEST_DIRECTORY"/t5100/
Create a variable that contains this path, and use that instead.
While we're making this change, make sure the quotes are not just around
the variable, but around the entire string to not give the impression
we want shell splitting to affect the other variables.
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Tue, 27 Sep 2016 20:44:09 +0000 (20:44 +0000)]
rev-list-options: clarify the usage of --reverse
Users often wonder if the oldest or the newest n commits are shown
by `log -n --reverse`. Clarify that --reverse kicks in only after
deciding which commits are to be shown to unconfuse them.
Reported-by: Ruediger Meier <sweet_f_a@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 27 Sep 2016 06:49:39 +0000 (23:49 -0700)]
worktree: honor configuration variables
The command accesses default_abbrev (defined in environment.c and is
updated via core.abbrev configuration), but never makes any call to
git_config(). The output from "worktree list" ignores the abbrev
setting for this reason.
Make a call to git_config() to read the default set of configuration
variables at the beginning of the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Turner [Tue, 27 Sep 2016 00:11:33 +0000 (20:11 -0400)]
add David Turner's Two Sigma address
Signed-off-by: David Turner <novalis@novalis.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 26 Sep 2016 04:29:04 +0000 (21:29 -0700)]
unpack_sha1_header(): detect malformed object header
When opening a loose object file, we often do this sequence:
- prepare a short buffer for the object header (on stack)
- call unpack_sha1_header() and have early part of the object data
inflated, enough to fill the buffer
- parse that data in the short buffer, assuming that the first part
of the object is <typename> SP <length> NUL
Because the parsing function parse_sha1_header_extended() is not
given the number of bytes inflated into the header buffer, it you
craft a file whose early part inflates a garbage sequence without SP
or NUL, and replace a loose object with it, it will end up reading
past the end of the inflated data.
To correct this, do the following four things:
- rename unpack_sha1_header() to unpack_sha1_short_header() and
have unpack_sha1_header_to_strbuf() keep calling that as its
helper function. This will detect and report zlib errors, but is
not aware of the format of a loose object (as before).
- introduce unpack_sha1_header() that calls the same helper
function, and when zlib reports it inflated OK into the buffer,
check if the inflated data has NUL. This would ensure that
parsing function will terminate within the buffer that holds the
inflated header.
- update unpack_sha1_header_to_strbuf() to check if the resulting
buffer has NUL for the same effect.
- update parse_sha1_header_extended() to make sure that its loop to
find the SP that terminates the <typename> stops at NUL.
Essentially, this makes unpack_*() functions that are asked to
unpack a loose object header to be a bit more strict and detect an
input that cannot possibly be a valid object header, even before the
parsing function kicks in.
Reported-by: Gustavo Grieco <gustavo.grieco@imag.fr>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 26 Sep 2016 16:23:41 +0000 (09:23 -0700)]
streaming: make sure to notice corrupt object
The streaming read interface from a loose object called
parse_sha1_header() but discarded its return value, without noticing
a potential error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 26 Sep 2016 14:16:29 +0000 (07:16 -0700)]
Merge branch 'rs/use-modern-git-merge-syntax' of git-gui into rs/git-gui-use-modern-git-merge-syntax
* 'rs/use-modern-git-merge-syntax' of git-gui:
git-gui: stop using deprecated merge syntax
René Scharfe [Sat, 24 Sep 2016 11:30:22 +0000 (13:30 +0200)]
git-gui: stop using deprecated merge syntax
Starting with v2.5.0 git merge can handle FETCH_HEAD internally and
warns when it's called like 'git merge <message> HEAD <commit>' because
that syntax is deprecated. Use this feature in git-gui and get rid of
that warning.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Tested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 25 Sep 2016 07:24:03 +0000 (09:24 +0200)]
use COPY_ARRAY
Add a semantic patch for converting certain calls of memcpy(3) to
COPY_ARRAY() and apply that transformation to the code base. The result
is
shorter and safer code. For now only consider calls where source and
destination have the same type, or in other words: easy cases.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 25 Sep 2016 07:15:42 +0000 (09:15 +0200)]
add COPY_ARRAY
Add COPY_ARRAY, a safe and convenient helper for copying arrays,
complementing ALLOC_ARRAY and REALLOC_ARRAY. Users just specify source,
destination and the number of elements; the size of an element is
inferred automatically.
It checks if the multiplication of size and element count overflows.
The inferred size is passed first to st_mult, which allows the division
there to be done at compilation time.
As a basic type safety check it makes sure the sizes of source and
destination elements are the same. That's evaluated at compilation time
as well.
COPY_ARRAY is safe to use with NULL as source pointer iff 0 elements are
to be copied. That convention is used in some cases for initializing
arrays. Raw memcpy(3) does not support it -- compilers are allowed to
assume that only valid pointers are passed to it and can optimize away
NULL checks after such a call.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Fri, 23 Sep 2016 17:41:35 +0000 (10:41 -0700)]
fetch-pack: do not reset in_vain on non-novel acks
The MAX_IN_VAIN mechanism was introduced in commit
f061e5f ("fetch-pack:
give up after getting too many "ack continue"", 2006-05-24) to stop ref
negotiation if a number of consecutive "have"s have been sent with no
corresponding new acks. This is to stop the client from digging too deep
in an irrelevant side branch in vain without ever finding a common
ancestor. A use case (as described in that commit) is the scenario in
which the local repository has more roots than the remote repository.
However, during a negotiation in which stateless RPCs are used,
MAX_IN_VAIN will (almost) never trigger (in the more-roots scenario
above and others) because in each new request, the client has to inform
the server of objects it already has and knows the server has (to remind
the server of the state), which the server then acks.
Make fetch-pack only consider, as new acks for the purpose of
MAX_IN_VAIN, acks for objects for which the client has never received an
ack before in this session.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 23 Sep 2016 04:37:53 +0000 (00:37 -0400)]
ident: handle NULL ai_canonname
We call getaddrinfo() to try to convert a short hostname
into a fully-qualified one (to use it as an email domain).
If there isn't a canonical name, getaddrinfo() will
generally return either a NULL addrinfo list, or one in
which ai->ai_canonname is a copy of the original name.
However, if the result of gethostname() looks like an IP
address, then getaddrinfo() behaves differently on some
systems. On OS X, it will return a "struct addrinfo" with a
NULL ai_canonname, and we segfault feeding it to strchr().
This is hard to test reliably because it involves not only a
system where we we have to fallback to gethostname() to come
up with an ident, but also where the hostname is a number
with no dots. But I was able to replicate the bug by faking
a hostname, like:
diff --git a/ident.c b/ident.c
index
e20a772..
b790d28 100644
--- a/ident.c
+++ b/ident.c
@@ -128,6 +128,7 @@ static void add_domainname(struct strbuf *out, int *is_bogus)
*is_bogus = 1;
return;
}
+ xsnprintf(buf, sizeof(buf), "1");
if (strchr(buf, '.'))
strbuf_addstr(out, buf);
else if (canonical_name(buf, out) < 0) {
and running "git var GIT_AUTHOR_IDENT" on an OS X system.
Before this patch it segfaults, and after we correctly
complain of the bogus "user@1.(none)" address (though this
bogus address would be suitable for non-object uses like
writing reflogs).
Reported-by: Jonas Thiel <jonas.lierschied@gmx.de>
Diagnosed-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 22 Sep 2016 07:26:28 +0000 (03:26 -0400)]
docs/cvs-migration: mention cvsimport caveats
Back when this guide was written, cvsimport was the only
game in town. These days it is probably not the best option.
Rather than go into details, let's point people to the note
at the top of cvsimport which gives other options.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 22 Sep 2016 07:26:07 +0000 (03:26 -0400)]
docs/cvs-migration: update link to cvsps homepage
The old page gives a 404 now. Searching for "cvsps" via
Google returns a GitHub project page as the top hit.
Reported-by: Dan Pritts
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 22 Sep 2016 07:25:28 +0000 (03:25 -0400)]
docs/cvsimport: prefer cvs-fast-export to parsecvs
parsecvs maintenance was taken over by ESR, and the name
changed to cvs-fast-export as it learned to support that
output format. Let's point to cvs-fast-export, as it should
have additional bug-fixes and be more convenient to use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 22 Sep 2016 03:49:05 +0000 (23:49 -0400)]
verify_packfile: check pack validity before accessing data
The verify_packfile() does not explicitly open the packfile;
instead, it starts with a sha1 checksum over the whole pack,
and relies on use_pack() to open the packfile as a side
effect.
If the pack cannot be opened for whatever reason (either
because its header information is corrupted, or perhaps
because a simultaneous repack deleted it), then use_pack()
will die(), as it has no way to return an error. This is not
ideal, as verify_packfile() otherwise tries to gently return
an error (this lets programs like git-fsck go on to check
other packs).
Instead, let's check is_pack_valid() up front, and return an
error if it fails. This will open the pack as a side effect,
and then use_pack() will later rely on our cached
descriptor, and avoid calling die().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lars Schneider [Wed, 21 Sep 2016 08:45:18 +0000 (10:45 +0200)]
travis-ci: ask homebrew for its path instead of hardcoding it
The TravisCI macOS build is broken because homebrew (a macOS dependency
manager) changed its internal directory structure [1]. This is a problem
because we modify the Perforce dependencies in the homebrew repository
before installing them.
Fix it by asking homebrew for its path instead of hardcoding it.
[1] https://github.com/Homebrew/brew/commit/
0a09ae30f8b6117ad699b4a0439010738989c547
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Tue, 20 Sep 2016 06:18:25 +0000 (08:18 +0200)]
t3700-add: do not check working tree file mode without POSIXPERM
A recently introduced test checks the result of 'git status' after
setting the executable bit on a file. This check does not yield the
expected result when the filesystem does not support the executable
bit.
What we care about is that a file added with "--chmod=+x" has
executable bit in the index and that "--chmod=+x" (or any other
options for that matter) does not muck with working tree files.
The former is tested by other existing tests, so let's check the
latter more explicitly and only under POSIXPERM prerequisite.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Wed, 21 Sep 2016 18:24:14 +0000 (20:24 +0200)]
regex: use regexec_buf()
The new regexec_buf() function operates on buffers with an explicitly
specified length, rather than NUL-terminated strings.
We need to use this function whenever the buffer we want to pass to
regexec(3) may have been mmap(2)ed (and is hence not NUL-terminated).
Note: the original motivation for this patch was to fix a bug where
`git diff -G <regex>` would crash. This patch converts more callers,
though, some of which allocated to construct NUL-terminated strings,
or worse, modified buffers to temporarily insert NULs while calling
regexec(3). By converting them to use regexec_buf(), the code has
become much cleaner.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Wed, 21 Sep 2016 18:24:04 +0000 (20:24 +0200)]
regex: add regexec_buf() that can work on a non NUL-terminated string
We just introduced a test that demonstrates that our sloppy use of
regexec() on a mmap()ed area can result in incorrect results or even
hard crashes.
So what we need to fix this is a function that calls regexec() on a
length-delimited, rather than a NUL-terminated, string.
Happily, there is an extension to regexec() introduced by the NetBSD
project and present in all major regex implementation including
Linux', MacOSX' and the one Git includes in compat/regex/: by using
the (non-POSIX) REG_STARTEND flag, it is possible to tell the
regexec() function that it should only look at the offsets between
pmatch[0].rm_so and pmatch[0].rm_eo.
That is exactly what we need.
Since support for REG_STARTEND is so widespread by now, let's just
introduce a helper function that always uses it, and tell people
on a platform whose regex library does not support it to use the
one from our compat/regex/ directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Wed, 21 Sep 2016 18:23:22 +0000 (20:23 +0200)]
regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails
When our pickaxe code feeds file contents to regexec(), it implicitly
assumes that the file contents are read into implicitly NUL-terminated
buffers (i.e. that we overallocate by 1, appending a single '\0').
This is not so.
In particular when the file contents are simply mmap()ed, we can be
virtually certain that the buffer is preceding uninitialized bytes, or
invalid pages.
Note that the test we add here is known to be flakey: we simply cannot
know whether the byte following the mmap()ed ones is a NUL or not.
Typically, on Linux the test passes. On Windows, it fails virtually
every time due to an access violation (that's a segmentation fault for
you Unix-y people out there). And Windows would be correct: the
regexec() call wants to operate on a regular, NUL-terminated string,
there is no NUL in the mmap()ed memory range, and it is undefined
whether the next byte is even legal to access.
When run with --valgrind it demonstrates quite clearly the breakage, of
course.
Being marked with `test_expect_failure`, this test will sometimes be
declare "TODO fixed", even if it only passes by mistake.
This test case represents a Minimal, Complete and Verifiable Example of
a breakage reported by Chris Sidi.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elia Pinto [Tue, 20 Sep 2016 07:33:14 +0000 (07:33 +0000)]
git-check-ref-format.txt: fixup documentation
die is not a standard shell function. Use
a different shell code for the example.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Tue, 20 Sep 2016 06:16:11 +0000 (08:16 +0200)]
t3700-add: create subdirectory gently
The subdirectory 'sub' is created early in the test file. Later, a test
case removes it during its clean-up actions. However, this test case is
protected by POSIXPERM. Consequently, 'sub' remains when the POSIXPERM
prerequisite is not satisfied. Later, a recently introduced test case
creates 'sub' again. Use -p with mkdir so that it does not fail if 'sub'
already exists.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nguyễn Thái Ngọc Duy [Wed, 7 Sep 2016 11:19:41 +0000 (18:19 +0700)]
checkout: fix ambiguity check in subdir
The two functions in parse_branchname_arg(), verify_non_filename and
check_filename, need correct prefix in order to reconstruct the paths
and check for their existence. With NULL prefix, they just check paths
at top dir instead.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nguyễn Thái Ngọc Duy [Wed, 7 Sep 2016 11:19:40 +0000 (18:19 +0700)]
checkout.txt: document a common case that ignores ambiguation rules
Normally we err on the safe side: if something can be seen as both an
SHA1 and a pathspec, we stop and scream. In checkout, there is one
exception added in
859fdab (git-checkout: improve error messages, detect
ambiguities. - 2008-07-23), to allow the common case "git checkout
branch". Let's document this exception.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 19 Sep 2016 20:54:50 +0000 (13:54 -0700)]
Start preparing for 2.10.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 19 Sep 2016 20:51:45 +0000 (13:51 -0700)]
Merge branch 'sb/diff-cleanup' into maint
Code cleanup.
* sb/diff-cleanup:
diff: remove dead code
diff: omit found pointer from emit_callback
diff.c: use diff_options directly
Junio C Hamano [Mon, 19 Sep 2016 20:51:45 +0000 (13:51 -0700)]
Merge branch 'ah/misc-message-fixes' into maint
Message cleanup.
* ah/misc-message-fixes:
unpack-trees: do not capitalize "working"
git-merge-octopus: do not capitalize "octopus"
git-rebase--interactive: fix English grammar
cat-file: put spaces around pipes in usage string
am: put spaces around pipe in usage string
Junio C Hamano [Mon, 19 Sep 2016 20:51:45 +0000 (13:51 -0700)]
Merge branch 'sb/transport-report-missing-submodule-on-stderr' into maint
Message cleanup.
* sb/transport-report-missing-submodule-on-stderr:
transport: report missing submodule pushes consistently on stderr
Junio C Hamano [Mon, 19 Sep 2016 20:51:44 +0000 (13:51 -0700)]
Merge branch 'sb/xdiff-remove-unused-static-decl' into maint
Code cleanup.
* sb/xdiff-remove-unused-static-decl:
xdiff: remove unneeded declarations
Junio C Hamano [Mon, 19 Sep 2016 20:51:44 +0000 (13:51 -0700)]
Merge branch 'js/t9903-chaining' into maint
Test fix.
* js/t9903-chaining:
t9903: fix broken && chain
Junio C Hamano [Mon, 19 Sep 2016 20:51:43 +0000 (13:51 -0700)]
Merge branch 'rs/hex2chr' into maint
Code cleanup.
* rs/hex2chr:
introduce hex2chr() for converting two hexadecimal digits to a character
Junio C Hamano [Mon, 19 Sep 2016 20:51:42 +0000 (13:51 -0700)]
Merge branch 'rs/compat-strdup' into maint
Code cleanup.
* rs/compat-strdup:
compat: move strdup(3) replacement to its own file
Junio C Hamano [Mon, 19 Sep 2016 20:51:41 +0000 (13:51 -0700)]
Merge branch 'jk/squelch-false-warning-from-gcc-o3' into maint
Compilation fix.
* jk/squelch-false-warning-from-gcc-o3:
color_parse_mem: initialize "struct color" temporary
error_errno: use constant return similar to error()
Junio C Hamano [Mon, 19 Sep 2016 20:51:41 +0000 (13:51 -0700)]
Merge branch 'ep/use-git-trace-curl-in-tests' into maint
Update a few tests that used to use GIT_CURL_VERBOSE to use the
newer GIT_TRACE_CURL.
* ep/use-git-trace-curl-in-tests:
t5551-http-fetch-smart.sh: use the GIT_TRACE_CURL environment var
t5550-http-fetch-dumb.sh: use the GIT_TRACE_CURL environment var
test-lib.sh: preserve GIT_TRACE_CURL from the environment
t5541-http-push-smart.sh: use the GIT_TRACE_CURL environment var
Junio C Hamano [Mon, 19 Sep 2016 20:51:41 +0000 (13:51 -0700)]
Merge branch 'js/t6026-clean-up' into maint
A test spawned a short-lived background process, which sometimes
prevented the test directory from getting removed at the end of the
script on some platforms.
* js/t6026-clean-up:
t6026-merge-attr: clean up background process at end of test case
Junio C Hamano [Mon, 19 Sep 2016 20:51:40 +0000 (13:51 -0700)]
Merge branch 'jc/forbid-symbolic-ref-d-HEAD' into maint
"git symbolic-ref -d HEAD" happily removes the symbolic ref, but
the resulting repository becomes an invalid one. Teach the command
to forbid removal of HEAD.
* jc/forbid-symbolic-ref-d-HEAD:
symbolic-ref -d: do not allow removal of HEAD
Junio C Hamano [Mon, 19 Sep 2016 20:51:40 +0000 (13:51 -0700)]
Merge branch 'jc/submodule-anchor-git-dir' into maint
Having a submodule whose ".git" repository is somehow corrupt
caused a few commands that recurse into submodules loop forever.
* jc/submodule-anchor-git-dir:
submodule: avoid auto-discovery in prepare_submodule_repo_env()
Junio C Hamano [Mon, 19 Sep 2016 20:51:39 +0000 (13:51 -0700)]
Merge branch 'jk/test-lib-drop-pid-from-results' into maint
The test framework left the number of tests and success/failure
count in the t/test-results directory, keyed by the name of the
test script plus the process ID. The latter however turned out not
to serve any useful purpose. The process ID part of the filename
has been removed.
* jk/test-lib-drop-pid-from-results:
test-lib: drop PID from test-results/*.count
Junio C Hamano [Mon, 19 Sep 2016 20:51:38 +0000 (13:51 -0700)]
Merge branch 'bh/diff-highlight-graph' into maint
"diff-highlight" script (in contrib/) learned to work better with
"git log -p --graph" output.
* bh/diff-highlight-graph:
diff-highlight: avoid highlighting combined diffs
diff-highlight: add multi-byte tests
diff-highlight: ignore test cruft
diff-highlight: add support for --graph output
diff-highlight: add failing test for handling --graph output
diff-highlight: add some tests
Junio C Hamano [Mon, 19 Sep 2016 20:51:37 +0000 (13:51 -0700)]
Merge branch 'po/range-doc' into maint
Clarify various ways to specify the "revision ranges" in the
documentation.
* po/range-doc:
doc: revisions: sort examples and fix alignment of the unchanged
doc: revisions: show revision expansion in examples
doc: revisions - clarify reachability examples
doc: revisions - define `reachable`
doc: gitrevisions - clarify 'latter case' is revision walk
doc: gitrevisions - use 'reachable' in page description
doc: revisions: single vs multi-parent notation comparison
doc: revisions: extra clarification of <rev>^! notation effects
doc: revisions: give headings for the two and three dot notations
doc: show the actual left, right, and boundary marks
doc: revisions - name the left and right sides
doc: use 'symmetric difference' consistently
René Scharfe [Sat, 17 Sep 2016 18:25:24 +0000 (20:25 +0200)]
pretty: let %C(auto) reset all attributes
Reset colors and attributes upon %C(auto) to enable full automatic
control over them; otherwise attributes like bold or reverse could
still be in effect from previous %C placeholders.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthieu Moy [Fri, 16 Sep 2016 07:32:48 +0000 (09:32 +0200)]
Documentation/config: default for color.* is color.ui
Since
4c7f181 (make color.ui default to 'auto', 2013-06-10), the
default for color.* when nothing is set is 'auto' and we still claimed
that the default was 'false'. Be more precise by saying explicitly
that the default is to follow color.ui, and recall that the default is
'auto' to avoid one indirection for the reader.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kirill Smelkov [Tue, 13 Sep 2016 06:58:00 +0000 (09:58 +0300)]
t/perf/run: copy config.mak.autogen & friends to build area
Otherwise for people who use autotools-based configure in main worktree,
the performance testing results will be inconsistent as work and build
trees could be using e.g. different optimization levels.
See e.g.
http://public-inbox.org/git/
20160818175222.bmm3ivjheokf2qzl@sigill.intra.peff.net/
for example.
NOTE config.status has to be copied because otherwise without it the build
would want to run reconfigure this way loosing just copied config.mak.autogen.
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>