OSDN Git Service
Shirish Pargaonkar [Fri, 28 Sep 2012 17:21:14 +0000 (12:21 -0500)]
cifs: obtain file access during backup intent lookup (resend)
Rebased and resending the patch.
Path based queries can fail for lack of access, especially during lookup
during open.
open itself would actually succeed becasue of back up intent bit
but queries (either path or file handle based) do not have a means to
specifiy backup intent bit.
So query the file info during lookup using
trans2 / findfirst / file_id_full_dir_info
to obtain file info as well as file_id/inode value.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 25 Sep 2012 07:00:08 +0000 (11:00 +0400)]
CIFS: Fix possible freed pointer dereference in CIFS_SessSetup
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 25 Sep 2012 07:00:09 +0000 (11:00 +0400)]
CIFS: Fix possible freed pointer dereference in SMB2_sess_setup
and remove redundant (rsp == NULL) checks after SendReceive2.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 25 Sep 2012 07:00:07 +0000 (11:00 +0400)]
CIFS: Make ops->close return void
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Jeff Layton [Mon, 24 Sep 2012 13:33:40 +0000 (09:33 -0400)]
cifs: change DOS/NT/POSIX mapping of ERRnoresource
ERRnoresource is an ERRSRV level (aka server-side) error and means "No
resources currently available for request". Currently that maps to POSIX
-ENOBUFS. No NT errors map to it currently.
NT_STATUS_INSUFFICIENT_RESOURCES and NT_STATUS_INSUFF_SERVER_RESOURCES
are also similar in meaning. Currently the client maps those to
ERRnomem, which maps to -ENOMEM in POSIX.
All of these mappings seem to be quite wrong to me and are confusing for
users. All of the above errors indicate problems on the server, not the
client. Reporting -ENOMEM or -ENOBUFS implies that the client is running
out of resources.
This patch changes those mappings. The NT_* errors are changed to map to
the SRV level ERRnoresource. That error is in turn changed to return
-EREMOTEIO which is the only POSIX error I could find that conveys that
something went wrong on the server. While we're at it, change the SMB2
equivalent error to return the same.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Jeff Layton [Wed, 19 Sep 2012 22:20:27 +0000 (15:20 -0700)]
cifs: remove support for deprecated "forcedirectio" and "strictcache" mount options
...and make the default cache=strict as promised for 3.7.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Jeff Layton [Wed, 19 Sep 2012 22:20:27 +0000 (15:20 -0700)]
cifs: remove support for CIFS_IOC_CHECKUMOUNT ioctl
...as promised for 3.7.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Wed, 19 Sep 2012 12:03:26 +0000 (16:03 +0400)]
CIFS: Fix possible memory leaks in SMB2 code
and add missed increments of failed async read and write requests.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Wed, 19 Sep 2012 08:36:52 +0000 (12:36 +0400)]
CIFS: Fix endian conversion of IndexNumber
by making it __le64 rather than __u64 in FILE_AL_INFO structure.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Steve French [Wed, 19 Sep 2012 16:19:39 +0000 (09:19 -0700)]
Trivial endian fixes
Some trivial endian fixes for the SMB2 code. One
warning remains which I asked Pavel to look at.
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Steve French [Wed, 19 Sep 2012 13:22:46 +0000 (06:22 -0700)]
MARK SMB2 support EXPERIMENTAL
Now that the merge of the remaining pieces needed for
SMB2 (SMB2.1 dialect) are in, and most test cases pass,
we can consider SMB2.1 EXPERIMENTAL rather than "BROKEN."
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Steve French [Wed, 19 Sep 2012 13:22:46 +0000 (06:22 -0700)]
Update cifs version number
With SMB2 support, update from version 1.79 to 2.0 to make
it easier for users to recognize which version has SMB2 support.
Signed-off-by: Steve French <sfrench@us.ibm.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Jeff Layton [Wed, 19 Sep 2012 13:22:46 +0000 (06:22 -0700)]
cifs: add FL_CLOSE to fl_flags mask in cifs_read_flock
FL_CLOSE is quite common when you close a file on which you hold a
lock. The spurious "Unknown lock flags" message in cFYI is
confusing in this case.
Reported-by: Alexander Bokovoy <abokovoy@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Sachin Prabhu [Wed, 19 Sep 2012 13:22:45 +0000 (06:22 -0700)]
cifs: Mangle string used for unc in /proc/mounts
The string for "unc=" in /proc/mounts needs to be escaped. The current
behaviour can create problems in cases when mounting a share starting
with a number.
example:
>mount -t cifs -o username=test,password=x vm140-31:/17000-test /mnt
>mount -o remount,password=x /mnt
mount error: could not resolve address for vm140-31x00-test: Unknown
error
The sub-string "\170" which is part of the unc for the mount above in
/proc/mounts is interpreted as character'x' in the case above. Escaping
the string fixes the problem.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Jeff Layton [Wed, 19 Sep 2012 13:22:45 +0000 (06:22 -0700)]
cifs: cleanups for cifs_mkdir_qinfo
Rename inode pointers for better clarity. Move the d_instantiate call to
the end of the function to prevent other tasks from seeing it before
we've finished constructing it. Since we should have exclusive access to
the inode at this point, remove the spinlock around i_nlink update.
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Pavel Shilovsky [Wed, 19 Sep 2012 13:22:45 +0000 (06:22 -0700)]
CIFS: Fix fast lease break after open problem
Now we walk though cifsFileInfo's list for every incoming lease
break and look for an equivalent there. That approach misses lease
breaks that come just after an open response - we don't have time
to populate new cifsFileInfo structure to the list. Fix this by
adding new list of pending opens and look for a lease there if we
didn't find it in the list of cifsFileInfo structures.
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Pavel Shilovsky [Wed, 19 Sep 2012 13:22:45 +0000 (06:22 -0700)]
CIFS: Add SMB2.1 lease break support
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Pavel Shilovsky [Wed, 19 Sep 2012 13:22:45 +0000 (06:22 -0700)]
CIFS: Fix cache coherency for read oplock case
When we have a file opened with read oplock and we are writing a data
to this file, we need to store the data in the cache and then send to
the server to ensure that the next read operation will get a coherent
data.
Also mark it as CONFIG_CIFS_SMB2 because it's more suitable for SMB2
code but can fix some CIFS problems too (when server delays sending
an oplock break after a write request). We can drop this ifdefs
dependence in future.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Pavel Shilovsky [Wed, 19 Sep 2012 13:22:44 +0000 (06:22 -0700)]
CIFS: Request SMB2.1 leases
if server supports them and we need oplocks.
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Pavel Shilovsky [Wed, 19 Sep 2012 13:22:44 +0000 (06:22 -0700)]
CIFS: Check for mandatory brlocks on read/write
Currently CIFS code accept read/write ops on mandatory locked area
when two processes use the same file descriptor - it's wrong.
Fix this by serializing io and brlock operations on the inode.
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Pavel Shilovsky [Wed, 19 Sep 2012 13:22:44 +0000 (06:22 -0700)]
CIFS: Turn lock mutex into rw semaphore
and allow several processes to walk through the lock list and read
can_cache_brlcks value if they are not going to modify them.
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Pavel Shilovsky [Wed, 19 Sep 2012 13:22:44 +0000 (06:22 -0700)]
CIFS: Use brlock cache for SMB2
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Pavel Shilovsky [Wed, 19 Sep 2012 13:22:43 +0000 (06:22 -0700)]
CIFS: Add brlock support for SMB2
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
Pavel Shilovsky [Wed, 19 Sep 2012 13:22:43 +0000 (06:22 -0700)]
CIFS: Handle SMB2 lock flags
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Pavel Shilovsky [Wed, 19 Sep 2012 13:22:43 +0000 (06:22 -0700)]
CIFS: Move brlock code to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Pavel Shilovsky [Wed, 19 Sep 2012 13:22:43 +0000 (06:22 -0700)]
CIFS: Remove spinlock dependence in brlock processing
Now we need to lock/unlock a spinlock while processing brlock ops
on the inode. Move brlocks of a fid to a separate list and attach
all such lists to the inode. This let us not hold a spinlock.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Pavel Shilovsky [Wed, 19 Sep 2012 13:22:43 +0000 (06:22 -0700)]
CIFS: Add NTLMSSP sec type to defaults
to let us negotiate SMB2 without specifying sec type explicitly.
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Jeff Layton [Wed, 19 Sep 2012 13:22:42 +0000 (06:22 -0700)]
cifs: remove kmap lock and rsize limit
Now that we aren't abusing the kmap address space, there's no need for
this lock or to impose a limit on the rsize.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Jeff Layton [Wed, 19 Sep 2012 13:22:34 +0000 (06:22 -0700)]
cifs: replace kvec array in readdata with a single kvec
The array is no longer needed. We just need a single kvec to hold the
header for signature checking.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Jeff Layton [Wed, 19 Sep 2012 13:22:32 +0000 (06:22 -0700)]
cifs: convert async read code to use pages array without kmapping
Replace the "marshal_iov" function with a "read_into_pages" function.
That function will copy the read data off the socket and into the
pages array, kmapping and reading pages one at a time.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Jeff Layton [Wed, 19 Sep 2012 13:22:30 +0000 (06:22 -0700)]
cifs: turn the pages list in cifs_readdata into an array
We'll need an array to put into a smb_rqst, so convert this into an array
instead of (ab)using the lru list_head.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Jeff Layton [Tue, 18 Sep 2012 23:20:36 +0000 (16:20 -0700)]
cifs: allocate kvec array for cifs_readdata as a separate allocation
Eventually, we're going to want to append a list of pages to
cifs_readdata instead of a list of kvecs. To prepare for that, turn
the kvec array allocation into a separate one and just keep a
pointer to it in the readdata.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Jeff Layton [Tue, 18 Sep 2012 23:20:36 +0000 (16:20 -0700)]
cifs: add deprecation warning to sockopt=TCP_NODELAY option
Now that we're using TCP_CORK on the socket, there's no value in
continuting to support this option. Schedule it for removal in 3.9.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Jeff Layton [Tue, 18 Sep 2012 23:20:36 +0000 (16:20 -0700)]
cifs: remove the kmap size limit from wsize
Now that we're not kmapping so much at once, there's no need to cap
the wsize at the amount that can be simultaneously kmapped.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Jeff Layton [Tue, 18 Sep 2012 23:20:35 +0000 (16:20 -0700)]
cifs: convert async write code to pass in data via rq_pages array
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Jeff Layton [Tue, 18 Sep 2012 23:20:35 +0000 (16:20 -0700)]
cifs: change cifs_call_async to use smb_rqst structs
For now, none of the callers populate rq_pages. That will be done for
writes in a later patch. While we're at it, change the prototype of
setup_async_request not to need a return pointer argument. Just
return the pointer to the mid_q_entry or an ERR_PTR.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Jeff Layton [Tue, 18 Sep 2012 23:20:35 +0000 (16:20 -0700)]
cifs: teach signing routines how to deal with arrays of pages in a smb_rqst
Use the smb_send_rqst helper function to kmap each page in the array
and update the hash for that chunk.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Jeff Layton [Tue, 18 Sep 2012 23:20:35 +0000 (16:20 -0700)]
cifs: teach smb_send_rqst how to handle arrays of pages
Add code that allows smb_send_rqst to send an array of pages after the
initial kvec array has been sent. For now, we simply kmap the page
array and send it using the standard smb_send_kvec function. Eventually,
we may want to convert this code to use kernel_sendpage under the hood
and avoid the kmap altogether for the page data.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Jeff Layton [Tue, 18 Sep 2012 23:20:35 +0000 (16:20 -0700)]
cifs: cork the socket before a send and uncork it afterward
We want to send SMBs as "atomically" as possible. Prior to sending any
data on the socket, cork it to make sure that no non-full frames go
out. Afterward, uncork it to make sure all of the data gets pushed out
to the wire.
Note that this more or less renders the socket=TCP_NODELAY mount option
obsolete. When TCP_CORK and TCP_NODELAY are used on the same socket,
TCP_NODELAY is essentially ignored.
Acked-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Jeff Layton [Tue, 18 Sep 2012 23:20:34 +0000 (16:20 -0700)]
cifs: convert send code to use smb_rqst structs
Again, just a change in the arguments and some function renaming here.
In later patches, we'll change this code to deal with page arrays.
In this patch, we add a new smb_send_rqst wrapper and have smb_sendv
call that. Then we move most of the existing smb_sendv code into a new
function -- smb_send_kvec. This seems a little redundant, but later
we'll flesh this out to deal with arrays of pages.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Jeff Layton [Tue, 18 Sep 2012 23:20:34 +0000 (16:20 -0700)]
cifs: change smb2 signing routines to use smb_rqst structs
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Jeff Layton [Tue, 18 Sep 2012 23:20:34 +0000 (16:20 -0700)]
cifs: change signing routines to deal with smb_rqst structs
We need a way to represent a call to be sent on the wire that does not
require having all of the page data kmapped. Behold the smb_rqst struct.
This new struct represents an array of kvecs immediately followed by an
array of pages.
Convert the signing routines to use these structs under the hood and
turn the existing functions for this into wrappers around that. For now,
we're just changing these functions to take different args. Later, we'll
teach them how to deal with arrays of pages.
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:34 +0000 (16:20 -0700)]
CIFS: Add statfs support for SMB2
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:33 +0000 (16:20 -0700)]
CIFS: Move statfs to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:33 +0000 (16:20 -0700)]
CIFS: Add oplock break support for SMB2
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:33 +0000 (16:20 -0700)]
CIFS: Move oplock break to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:33 +0000 (16:20 -0700)]
CIFS: Process oplocks for SMB2
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:33 +0000 (16:20 -0700)]
CIFS: Add readdir support for SMB2
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:32 +0000 (16:20 -0700)]
CIFS: Move readdir code to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:32 +0000 (16:20 -0700)]
CIFS: Add set_file_info support for SMB2
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:32 +0000 (16:20 -0700)]
CIFS: Move set_file_info to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:32 +0000 (16:20 -0700)]
CIFS: Add SMB2 support for set_file_size
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:31 +0000 (16:20 -0700)]
CIFS: Move set_file_size to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:31 +0000 (16:20 -0700)]
CIFS: Add SMB2 support for hardlink operation
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Steve French [Tue, 18 Sep 2012 23:20:31 +0000 (16:20 -0700)]
CIFS: Move hardlink to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:31 +0000 (16:20 -0700)]
CIFS: Add SMB2 support for rename operation
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:30 +0000 (16:20 -0700)]
CIFS: Move rename to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:30 +0000 (16:20 -0700)]
CIFS: Enable signing in SMB2
Use hmac-sha256 and rather than hmac-md5 that is used for CIFS/SMB.
Signature field in SMB2 header is 16 bytes instead of 8 bytes.
Automatically enable signing by client when requested by the server
when signing ability is available to the client.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:30 +0000 (16:20 -0700)]
CIFS: Add writepage support for SMB2
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:30 +0000 (16:20 -0700)]
CIFS: Move writepage to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:30 +0000 (16:20 -0700)]
CIFS: Add readpage support for SMB2
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:29 +0000 (16:20 -0700)]
CIFS: Move readpage code to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:29 +0000 (16:20 -0700)]
CIFS: Add SMB2 support for cifs_iovec_write
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:29 +0000 (16:20 -0700)]
CIFS: Move async write to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:29 +0000 (16:20 -0700)]
CIFS: Add SMB2 support for cifs_iovec_read
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:28 +0000 (16:20 -0700)]
CIFS: Move async read to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:28 +0000 (16:20 -0700)]
CIFS: Add SMB2 r/wsize negotiating
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:28 +0000 (16:20 -0700)]
CIFS: Move r/wsize negotiating to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:28 +0000 (16:20 -0700)]
CIFS: Add SMB2 support for flush
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:27 +0000 (16:20 -0700)]
CIFS: Make flush code use ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:27 +0000 (16:20 -0700)]
CIFS: Move reopen code to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:27 +0000 (16:20 -0700)]
CIFS: Move create code use ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:27 +0000 (16:20 -0700)]
CIFS: Add SMB2 support for query_file_info
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:26 +0000 (16:20 -0700)]
CIFS: Move guery file info code to ops struct
and make cifs_get_file_info(_unix) calls static.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:26 +0000 (16:20 -0700)]
CIFS: Add open/close file support for SMB2
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:26 +0000 (16:20 -0700)]
CIFS: Move close code to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:26 +0000 (16:20 -0700)]
CIFS: Move open code to ops struct
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:26 +0000 (16:20 -0700)]
CIFS: Replace netfid with cifs_fid struct in cifsFileInfo
This is help us to extend the code for future protocols that can use
another fid mechanism (as SMB2 that has it divided into two parts:
persistent and violatile).
Also rename variables and refactor the code around the changes.
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:25 +0000 (16:20 -0700)]
CIFS: Add SMB2 support for unlink
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky [Tue, 18 Sep 2012 23:20:25 +0000 (16:20 -0700)]
CIFS: Move unlink code to ops struct
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Linus Torvalds [Mon, 24 Sep 2012 23:17:17 +0000 (16:17 -0700)]
Merge git://git./linux/kernel/git/cmetcalf/linux-tile
Pull tile gxio ABI fix from Chris Metcalf:
"This fixes a last-minute change in the Tilera hypervisor ABI for TRIO
(PCI root complex) support. We've locked in this ABI going forward
and will make sure no further ABI changes like this occur."
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile: gxio iorpc numbering change for TRIO interface
Linus Torvalds [Mon, 24 Sep 2012 23:16:33 +0000 (16:16 -0700)]
Merge tag 'vfio-for-linus' of git://github.com/awilliam/linux-vfio
Pull vfio fixes from Alex Williamson:
"VFIO doc update and virqfd race fix"
* tag 'vfio-for-linus' of git://github.com/awilliam/linux-vfio:
vfio: Fix virqfd release race
vfio: Trivial Documentation correction
Linus Torvalds [Mon, 24 Sep 2012 23:14:34 +0000 (16:14 -0700)]
Merge tag 'stable/for-linus-3.6-rc7-tag' of git://git./linux/kernel/git/konrad/xen
Pull a Xen fix from Konrad Rzeszutek Wilk:
"It is a bug-fix when we run the initial PV guest on a AMD K8 machine
and have CONFIG_AMD_NUMA enabled and detect the NUMA topology from the
Northbridge.
We end up in the situation where the initial domain gets too much
information and gets confused and crashes - the fix is to restrict the
domain to get the information - and we do it by just disabling NUMA on
the PV guest (the hypervisor is still able to do its proper NUMA
allocations of guests).
It is OK to disable the PV guest from accessing NUMA data as right now
we do not inject any NUMA node information to the PV guests. When we
do get to that point, then this patch will have to be reverted."
* Disable PV NUMA support as we do not do anything with it (yet) and it
can cause bootup crashes on certain AMD machines.
* tag 'stable/for-linus-3.6-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/boot: Disable NUMA for PV guests.
Linus Torvalds [Mon, 24 Sep 2012 23:13:49 +0000 (16:13 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
Pull two ceph fixes from Sage Weil:
"The first fixes a leak in the rbd setup error path, and the second
fixes a more serious problem with mismatched kmap/kunmap that surfaced
after the recent refactoring work."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: only kunmap kmapped pages
rbd: drop dev reference on error in rbd_open()
Chris Metcalf [Mon, 24 Sep 2012 18:57:58 +0000 (14:57 -0400)]
tile: gxio iorpc numbering change for TRIO interface
An ABI numbering change was made in the hypervisor for Tilera's 4.1
MDE release (just shipped). It's incompatible with the previous 4.0
release ABI numbering, so we track the new numbering going forward.
We plan to avoid modifying ABI numbering for these interfaces again.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Konrad Rzeszutek Wilk [Fri, 17 Aug 2012 14:22:37 +0000 (10:22 -0400)]
xen/boot: Disable NUMA for PV guests.
The hypervisor is in charge of allocating the proper "NUMA" memory
and dealing with the CPU scheduler to keep them bound to the proper
NUMA node. The PV guests (and PVHVM) have no inkling of where they
run and do not need to know that right now. In the future we will
need to inject NUMA configuration data (if a guest spans two or more
NUMA nodes) so that the kernel can make the right choices. But those
patches are not yet present.
In the meantime, disable the NUMA capability in the PV guest, which
also fixes a bootup issue. Andre says:
"we see Dom0 crashes due to the kernel detecting the NUMA topology not
by ACPI, but directly from the northbridge (CONFIG_AMD_NUMA).
This will detect the actual NUMA config of the physical machine, but
will crash about the mismatch with Dom0's virtual memory. Variation of
the theme: Dom0 sees what it's not supposed to see.
This happens with the said config option enabled and on a machine where
this scanning is still enabled (K8 and Fam10h, not Bulldozer class)
We have this dump then:
NUMA: Warning: node ids are out of bound, from=-1 to=-1 distance=10
Scanning NUMA topology in Northbridge 24
Number of physical nodes 4
Node 0 MemBase
0000000000000000 Limit
0000000040000000
Node 1 MemBase
0000000040000000 Limit
0000000138000000
Node 2 MemBase
0000000138000000 Limit
00000001f8000000
Node 3 MemBase
00000001f8000000 Limit
0000000238000000
Initmem setup node 0
0000000000000000-
0000000040000000
NODE_DATA [
000000003ffd9000 -
000000003fffffff]
Initmem setup node 1
0000000040000000-
0000000138000000
NODE_DATA [
0000000137fd9000 -
0000000137ffffff]
Initmem setup node 2
0000000138000000-
00000001f8000000
NODE_DATA [
00000001f095e000 -
00000001f0984fff]
Initmem setup node 3
00000001f8000000-
0000000238000000
Cannot find 159744 bytes in node 3
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<
ffffffff81d220e6>] __alloc_bootmem_node+0x43/0x96
Pid: 0, comm: swapper Not tainted 3.3.6 #1 AMD Dinar/Dinar
RIP: e030:[<
ffffffff81d220e6>] [<
ffffffff81d220e6>] __alloc_bootmem_node+0x43/0x96
.. snip..
[<
ffffffff81d23024>] sparse_early_usemaps_alloc_node+0x64/0x178
[<
ffffffff81d23348>] sparse_init+0xe4/0x25a
[<
ffffffff81d16840>] paging_init+0x13/0x22
[<
ffffffff81d07fbb>] setup_arch+0x9c6/0xa9b
[<
ffffffff81683954>] ? printk+0x3c/0x3e
[<
ffffffff81d01a38>] start_kernel+0xe5/0x468
[<
ffffffff81d012cf>] x86_64_start_reservations+0xba/0xc1
[<
ffffffff81007153>] ? xen_setup_runstate_info+0x2c/0x36
[<
ffffffff81d050ee>] xen_start_kernel+0x565/0x56c
"
so we just disable NUMA scanning by setting numa_off=1.
CC: stable@vger.kernel.org
Reported-and-Tested-by: Andre Przywara <andre.przywara@amd.com>
Acked-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Linus Torvalds [Mon, 24 Sep 2012 01:10:57 +0000 (18:10 -0700)]
Linux 3.6-rc7
Linus Torvalds [Sun, 23 Sep 2012 22:40:58 +0000 (15:40 -0700)]
Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild
Pull kbuild fixes from Michal Marek:
"There are two more kbuild fixes for 3.6.
One fixes a race between x86's archscripts target and the rule
(re)building scripts/basic/fixdep. The second is a fix for the
previous attempt at fixing make firmware_install with make 3.82.
This new solution should work with any version of GNU make"
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
x86/kbuild: archscripts depends on scripts_basic
firmware: fix directory creation rule matching with make 3.80
Linus Torvalds [Sun, 23 Sep 2012 21:50:15 +0000 (14:50 -0700)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging
Pull hwmon subsystem fixes from Jean Delvare.
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
hwmon: (fam15h_power) Tweak runavg_range on resume
hwmon: (coretemp) Use get_online_cpus to avoid races involving CPU hotplug
hwmon: (via-cputemp) Use get_online_cpus to avoid races involving CPU hotplug
Linus Torvalds [Sun, 23 Sep 2012 21:48:28 +0000 (14:48 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of four essential fixes: two oops related (bnx2i,
virtio-scsi), one data corruption related (hpsa) and one failure to
boot due to interrupt routing issues (mpt2ss).
Signed-off-by: James Bottomley <JBottomley@Parallels.com>"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] hpsa: fix handling of protocol error
[SCSI] mpt2sas: Fix for issue - Unable to boot from the drive connected to HBA
[SCSI] bnx2i: Fixed NULL ptr deference for 1G bnx2 Linux iSCSI offload
[SCSI] scsi: virtio-scsi: Fix address translation failure of HighMem pages used by sg list
Shaun Ruffell [Sun, 23 Sep 2012 01:26:38 +0000 (20:26 -0500)]
edac_mc: edac_mc_free() cannot assume mem_ctl_info is registered in sysfs.
Fix potential NULL pointer dereference in edac_unregister_sysfs() on
system boot introduced in 3.6-rc1.
Since commit
7a623c039 ("edac: rewrite the sysfs code to use struct
device") edac_mc_alloc() no longer initializes embedded kobjects in
struct mem_ctl_info. Therefore edac_mc_free() can no longer simply
decrement a kobject reference count to free the allocated memory unless
the memory controller driver module had also called edac_mc_add_mc().
Now edac_mc_free() will check if the newly embedded struct device has
been registered with sysfs before using either the standard device
release functions or freeing the data structures itself with logic
pulled out of the error path of edac_mc_alloc().
The BUG this patch resolves for me:
BUG: unable to handle kernel NULL pointer dereference at (null)
EIP is at __wake_up_common+0x1a/0x6a
Process modprobe (pid: 933, ti=
f3dc6000 task=
f3db9520 task.ti=
f3dc6000)
Call Trace:
complete_all+0x3f/0x50
device_pm_remove+0x23/0xa2
device_del+0x34/0x142
edac_unregister_sysfs+0x3b/0x5c [edac_core]
edac_mc_free+0x29/0x2f [edac_core]
e7xxx_probe1+0x268/0x311 [e7xxx_edac]
e7xxx_init_one+0x56/0x61 [e7xxx_edac]
local_pci_probe+0x13/0x15
...
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fengguang Wu [Sun, 23 Sep 2012 00:18:06 +0000 (08:18 +0800)]
edac_mc: fix messy kfree calls in the error path
coccinelle warns about:
+ drivers/edac/edac_mc.c:429:9-23: ERROR: reference preceded by free on line 429
421 if (mci->csrows) {
> 422 for (chn = 0; chn < tot_channels; chn++) {
423 csr = mci->csrows[chn];
424 if (csr) {
> 425 for (chn = 0; chn < tot_channels; chn++)
426 kfree(csr->channels[chn]);
427 kfree(csr);
428 }
> 429 kfree(mci->csrows[i]);
430 }
431 kfree(mci->csrows);
432 }
and that code block seem to mess things up in several ways (double free, memory
leak, out-of-bound reads etc.):
L422: The iterator "chn" and bound "tot_channels" are totally wrong. Should be
"row" and "tot_csrows" respectively. Which means either memory leak, or
out-of-bound reads (which if does not trigger an immediate page fault
error, will further lead to kfree() on random addresses).
L425: The inner loop is reusing the same iterator "chn" as the outer loop,
which could lead to premature end of the outer loop, and hence memory leak.
L429: The array index 'i' in mci->csrows[i] is a temporary value used in
previous loops, and won't change at all in the current loop. Which
means either out-of-bound read and possibly kfree(random number), or the
same mci->csrows[i] get freed once and again, and possibly double free
for the kfree(csr) in L427.
L426/L427: a kfree(csr->channels) is needed in between to avoid leaking the memory.
The buggy code was introduced by commit
de3910eb ("edac: change the mem
allocation scheme to make Documentation/kobject.txt happy") in the 3.6-rc1
merge window. Fix it by freeing up resources in this order:
free csrows[i]->channels[j]
free csrows[i]->channels
free csrows[i]
free csrows
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
CC: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andreas Herrmann [Sun, 23 Sep 2012 18:27:32 +0000 (20:27 +0200)]
hwmon: (fam15h_power) Tweak runavg_range on resume
The quirk introduced with commit
00250ec90963b7ef6678438888f3244985ecde14 (hwmon: fam15h_power: fix
bogus values with current BIOSes) is not only required during driver
load but also when system resumes from suspend. The BIOS might set the
previously recommended (but unsuitable) initilization value for the
running average range register during resume.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Tested-by: Andreas Hartmann <andihartmann@01019freenet.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@vger.kernel.org # 3.0+
Silas Boyd-Wickizer [Sun, 23 Sep 2012 18:27:32 +0000 (20:27 +0200)]
hwmon: (coretemp) Use get_online_cpus to avoid races involving CPU hotplug
coretemp_init loops with for_each_online_cpu, adding platform_devices
and sysfs interfaces, then calls register_hotcpu_notifier. There is a
race if a CPU is offlined or onlined after the loop, but before
register_hotcpu_notifier. The race might result in the absence of a
platform_device+sysfs interface for an online CPU, or the presence of
a platform_device+sysfs interface for an offline CPU. A similar race
occurs during coretemp_exit, after the module calls
unregister_hotcpu_notifier, but before it unregisters all devices, a
CPU might offline and a device for an offline CPU will exist for a
short while.
This fix surrounds for_each_online_cpu and register_hotcpu_notifier
with get_online_cpus+put_online_cpus; and surrounds
unregister_hotcpu_notifier and device unregistering with
get_online_cpus+put_online_cpus.
Build tested.
Signed-off-by: Silas Boyd-Wickizer <sbw@mit.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Silas Boyd-Wickizer [Sun, 23 Sep 2012 18:27:32 +0000 (20:27 +0200)]
hwmon: (via-cputemp) Use get_online_cpus to avoid races involving CPU hotplug
via_cputemp_init loops with for_each_online_cpu, adding
platform_devices, then calls register_hotcpu_notifier. If a CPU is
offlined between the loop and register_hotcpu_notifier, then later
onlined, via_cputemp_device_add will attempt to add platform devices
with the same ID. A similar race occurs during via_cputemp_exit,
after the module calls unregister_hotcpu_notifier, a CPU might offline
and a device will exist for a CPU that is offline.
This fix surrounds for_each_online_cpu and register_hotcpu_notifier
with get_online_cpus+put_online_cpus; and surrounds
unregister_hotcpu_notifier and device unregistering with
get_online_cpus+put_online_cpus.
Build tested.
Signed-off-by: Silas Boyd-Wickizer <sbw@mit.edu>
Acked-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Linus Torvalds [Sat, 22 Sep 2012 19:47:53 +0000 (12:47 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Random fixes across arch/mips, essentially.
One fix for an issue in get_user_pages_fast() which previously was
discovered on x86, a miscalculation in the support for the MIPS MT
hardware multithreading support, the RTC support for the Malta and a
fix for a spurious interrupt issue that seems to bite only very
special Malta configurations."
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Malta: Don't crash on spurious interrupt.
MIPS: Malta: Remove RTC Data Mode bootstrap breakage
MIPS: mm: Add compound tail page _mapcount when mapped
MIPS: CMP/SMTC: Fix tc_id calculation
Linus Torvalds [Sat, 22 Sep 2012 19:40:16 +0000 (12:40 -0700)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM and clkdev fixes from Russell King:
"Two patches for clkdev which resolve the long standing issue that the
devm_* versions were dependent on clkdev, which they shouldn't have
been. Instead, they're dependent on HAVE_CLK instead, which implies
that you're providing clk_get() and clk_put().
A small fix to the ARM decompressor to ensure that the page tables are
properly interpreted by the CPU, and reserve syscall 378 for kcmp (the
checksyscalls.sh script is unfortunately currently broken so arch
maintainers aren't getting notified of new syscalls...)
Lastly, a larger fix for an issue between the common clk subsystem and
smp_twd which causes warnings to be spat out."
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: reserve syscall 378 for kcmp
ARM: 7535/1: Reprogram smp_twd based on new common clk framework notifiers
ARM: 7537/1: clk: Fix release in devm_clk_put()
ARM: 7532/1: decompressor: reset SCTLR.TRE for VMSA ARMv7 cores
ARM: 7534/1: clk: Make the managed clk functions generically available
Linus Torvalds [Sat, 22 Sep 2012 19:37:54 +0000 (12:37 -0700)]
Merge branch 'upstream-fixes' of git://git./linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
"The most important fix is Logitech Unifying receiver regression in
device enumeration fix from Nestor Lopez Casado. In addition to that,
there is a small memory leak fix for Thinkpad keyboard driver from
Axel Lin."
* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: Fix logitech-dj: missing Unifying device issue
HID: lenovo-tpkbd: Fix memory leak in tpkbd_remove_tp()
Linus Torvalds [Sat, 22 Sep 2012 19:36:57 +0000 (12:36 -0700)]
Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fix from Steve French.
* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix return value in cifsConvertToUTF16
Nestor Lopez Casado [Fri, 21 Sep 2012 10:21:34 +0000 (12:21 +0200)]
HID: Fix logitech-dj: missing Unifying device issue
This patch fixes an issue introduced after commit
4ea5454203d991ec
("HID: Fix race condition between driver core and ll-driver").
After that commit, hid-core discards any incoming packet that arrives while
hid driver's probe function is being executed.
This broke the enumeration process of hid-logitech-dj, that must receive
control packets in-band with the mouse and keyboard packets. Discarding mouse
or keyboard data at the very begining is usually fine, but it is not the case
for control packets.
This patch forces a re-enumeration of the paired devices when a packet arrives
that comes from an unknown device.
Based on a patch originally written by Benjamin Tissoires.
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>