OSDN Git Service
Mohamad Haj Yahia [Tue, 6 Dec 2016 15:32:48 +0000 (17:32 +0200)]
net/mlx5e: Change the SQ/RQ operational state to positive logic
When using the negative logic (i.e. FLUSH state), after the RQ/SQ reopen
we will have a time interval that the RQ/SQ is not really ready and the
state indicates that its not in FLUSH state because the initial SQ/RQ struct
memory starts as zeros.
Now we changed the state to indicate if the SQ/RQ is opened and we will
set the READY state after finishing preparing all the SQ/RQ resources.
Fixes:
6e8dd6d6f4bd ("net/mlx5e: Don't wait for SQ completions on close")
Fixes:
f2fde18c52a7 ("net/mlx5e: Don't wait for RQ completions on close")
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed [Tue, 6 Dec 2016 15:32:47 +0000 (17:32 +0200)]
net/mlx5e: Don't flush SQ on error
We are doing SQ descriptors cleanup in driver.
Fixes:
6e8dd6d6f4bd ("net/mlx5e: Don't wait for SQ completions on close")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed [Tue, 6 Dec 2016 15:32:46 +0000 (17:32 +0200)]
net/mlx5e: Don't notify HW when filling the edge of ICO SQ
We are going to do this a couple of steps ahead anyway.
Fixes:
d3c9bc2743dc ("net/mlx5e: Added ICO SQs")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kamal Heib [Tue, 6 Dec 2016 15:32:45 +0000 (17:32 +0200)]
net/mlx5: Fix query ISSI flow
In old FWs query ISSI command is not supported and for some of those FWs
it might fail with status other than "MLX5_CMD_STAT_BAD_OP_ERR".
In such case instead of failing the driver load, we will treat any FW
status other than 0 for Query ISSI FW command as ISSI not supported and
assume ISSI=0 (most basic driver/FW interface).
In case of driver syndrom (query ISSI failure by driver) we will fail
driver load.
Fixes:
f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4
Ethernet functionality')
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kamal Heib [Tue, 6 Dec 2016 15:32:44 +0000 (17:32 +0200)]
net/mlx5: Remove duplicate pci dev name print
Remove duplicate pci dev name printing from mlx5_core_warn/dbg.
Fixes:
5a7883989b1c ('net/mlx5_core: Improve mlx5 messages')
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kamal Heib [Tue, 6 Dec 2016 15:32:43 +0000 (17:32 +0200)]
net/mlx5: Verify module parameters
Verify the mlx5_core module parameters by making sure that they are in
the expected range and if they aren't restore them to their default
values.
Fixes:
9603b61de1ee ('mlx5: Move pci device handling from mlx5_ib to mlx5_core')
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikita Yushchenko [Tue, 6 Dec 2016 06:26:53 +0000 (09:26 +0300)]
net: fec: fix compile with CONFIG_M5272
Commit
80cca775cdc4 ("net: fec: cache statistics while device is down")
introduced unconditional statistics-related actions.
However, when driver is compiled with CONFIG_M5272, staticsics-related
definitions do not exist, which results into build errors.
Fix that by adding explicit handling of !defined(CONFIG_M5272) case.
Fixes:
80cca775cdc4 ("net: fec: cache statistics while device is down")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Venkat Duvvuru [Tue, 6 Dec 2016 05:33:50 +0000 (00:33 -0500)]
be2net: Add DEVSEC privilege to SET_HSW_CONFIG command.
OPCODE_COMMON_GET_FN_PRIVILEGES is returning only DEVSEC
privilege (Unrestricted Administrative Privilege) for Lancer NIC functions.
So, driver is failing SET_HSW_CONFIG command, as DEVSEC privilege was not
set in the privilege bitmap. This patch fixes the problem by setting DEVSEC
privilege in SET_HSW_CONFIG’s privilege bitmap.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Lutomirski [Tue, 6 Dec 2016 02:10:58 +0000 (18:10 -0800)]
virtio-net: Fix DMA-from-the-stack in virtnet_set_mac_address()
With CONFIG_VMAP_STACK=y, virtnet_set_mac_address() can be passed a
pointer to the stack and it will OOPS. Copy the address to the heap
to prevent the crash.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Laura Abbott <labbott@redhat.com>
Reported-by: zbyszek@in.waw.pl
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Mon, 5 Dec 2016 20:37:13 +0000 (18:37 -0200)]
tcp: warn on bogus MSS and try to amend it
There have been some reports lately about TCP connection stalls caused
by NIC drivers that aren't setting gso_size on aggregated packets on rx
path. This causes TCP to assume that the MSS is actually the size of the
aggregated packet, which is invalid.
Although the proper fix is to be done at each driver, it's often hard
and cumbersome for one to debug, come to such root cause and report/fix
it.
This patch amends this situation in two ways. First, it adds a warning
on when this situation occurs, so it gives a hint to those trying to
debug this. It also limit the maximum probed MSS to the adverised MSS,
as it should never be any higher than that.
The result is that the connection may not have the best performance ever
but it shouldn't stall, and the admin will have a hint on what to look
for.
Tested with virtio by forcing gso_size to 0.
v2: updated msg per David's suggestion
v3: use skb_iif to find the interface and also log its name, per Eric
Dumazet's suggestion. As the skb may be backlogged and the interface
gone by then, we need to check if the number still has a meaning.
v4: use helper tcp_gro_dev_warn() and avoid pr_warn_once inside __once, per
David's suggestion
Cc: Jonathan Maxwell <jmaxwell37@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonas Gorski [Sat, 3 Dec 2016 16:31:45 +0000 (17:31 +0100)]
uapi glibc compat: fix outer guard of net device flags enum
Fix a wrong condition preventing the higher net device flags
IFF_LOWER_UP etc to be defined if net/if.h is included before
linux/if.h.
The comment makes it clear the intention was to allow partial
definition with either parts.
This fixes compilation of userspace programs trying to use
IFF_LOWER_UP, IFF_DORMANT or IFF_ECHO.
Fixes:
4a91cb61bb99 ("uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Niklas Cassel [Mon, 5 Dec 2016 17:12:54 +0000 (18:12 +0100)]
net: stmmac: clear reset value of snps, wr_osr_lmt/snps, rd_osr_lmt before writing
WR_OSR_LMT and RD_OSR_LMT have a reset value of 1.
Since the reset value wasn't cleared before writing, the value in the
register would be incorrect if specifying an uneven value for
snps,wr_osr_lmt/snps,rd_osr_lmt.
Zero is a valid value for the properties, since the databook specifies:
maximum outstanding requests = WR_OSR_LMT + 1.
We do not want to change the behavior for existing users when the
property is missing. Therefore, default to 1 if the property is missing,
since that is the same as the reset value.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Mon, 5 Dec 2016 07:28:21 +0000 (15:28 +0800)]
netlink: Do not schedule work from sk_destruct
It is wrong to schedule a work from sk_destruct using the socket
as the memory reserve because the socket will be freed immediately
after the return from sk_destruct.
Instead we should do the deferral prior to sk_free.
This patch does just that.
Fixes:
707693c8a498 ("netlink: Call cb->done from a worker thread")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Fri, 2 Dec 2016 22:54:00 +0000 (14:54 -0800)]
uapi: export nf_log.h
File is in uapi directory but not being copied on
make install_headers
Fixes commit
4ec9c8fbbc22 ("netfilter: nft_log: complete
NFTA_LOG_FLAGS attr support").
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephen hemminger [Fri, 2 Dec 2016 22:53:59 +0000 (14:53 -0800)]
uapi: export tc_skbmod.h
Fixes commit
735cffe5d800 ("net_sched: Introduce skbmod action")
Not used by iproute2 but maybe in future.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Mon, 5 Dec 2016 03:22:05 +0000 (19:22 -0800)]
net: ep93xx_eth: Do not crash unloading module
When we unload the ep93xx_eth, whether we have opened the network
interface or not, we will either hit a kernel paging request error, or a
simple NULL pointer de-reference because:
- if ep93xx_open has been called, we have created a valid DMA mapping
for ep->descs, when we call ep93xx_stop, we also call
ep93xx_free_buffers, ep->descs now has a stale value
- if ep93xx_open has not been called, we have a NULL pointer for
ep->descs, so performing any operation against that address just won't
work
Fix this by adding a NULL pointer check for ep->descs which means that
ep93xx_free_buffers() was able to successfully tear down the descriptors
and free the DMA cookie as well.
Fixes:
1d22e05df818 ("[PATCH] Cirrus Logic ep93xx ethernet driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 5 Dec 2016 20:08:40 +0000 (15:08 -0500)]
Merge branch 'bnx2x-fixes'
Yuval Mintz says:
====================
bnx2x: fixes series
Two unrelated fixes for bnx2x - the first one is nice-to-have,
while the other fixes fatal behaviour in older adapters.
Please consider applying them to `net'.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Sun, 4 Dec 2016 13:30:18 +0000 (15:30 +0200)]
bnx2x: Prevent tunnel config for 577xx
Only the 578xx adapters are capable of configuring UDP ports for
the purpose of tunnelling - doing the same on 577xx might lead to
a firmware assertion.
We're already not claiming support for any related feature for such
devices, but we also need to prevent the configuration of the UDP
ports to the device in this case.
Fixes:
f34fa14cc033 ("bnx2x: Add vxlan RSS support")
Reported-by: Anikina Anna <anikina@gmail.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Sun, 4 Dec 2016 13:30:17 +0000 (15:30 +0200)]
bnx2x: Correct ringparam estimate when DOWN
Until interface is up [and assuming ringparams weren't explicitly
configured] when queried for the size of its rings bnx2x would
claim they're the maximal size by default.
That is incorrect as by default the maximal number of buffers would
be equally divided between the various rx rings.
This prevents the user from actually setting the number of elements
on each rx ring to be of maximal size prior to transitioning the
interface into up state.
To fix this, make a rough estimation about the number of buffers.
It wouldn't always be accurate, but it would be much better than
current estimation and would allow users to increase number of
buffers during early initialization of the interface.
Reported-by: Seymour, Shane <shane.seymour@hpe.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Sun, 4 Dec 2016 10:43:31 +0000 (18:43 +0800)]
isdn: hisax: set error code on failure
In function hfc4s8s_probe(), the value of return variable err should be
negative on failures. However, when the call to request_region() returns
NULL, the value of err is 0. This patch fixes the bug, assigning
"-EBUSY" to err on the path that request_region() fails.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188931
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Sun, 4 Dec 2016 10:46:03 +0000 (18:46 +0800)]
net: bnx2x: fix improper return value
Macro BNX2X_ALLOC_AND_SET(arr, lbl, func) calls kmalloc() to allocate
memory, and jumps to label "lbl" if the allocation fails. Label "lbl"
first cleans memory and then returns variable rc. Before calling the
macro, the value of variable rc is 0. Because 0 means no error, the
callers of bnx2x_init_firmware() may be misled. This patch fixes the bug,
assigning "-ENOMEM" to rc before calling macro NX2X_ALLOC_AND_SET().
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189141
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Sun, 4 Dec 2016 05:53:53 +0000 (13:53 +0800)]
net: ethernet: qlogic: set error code on failure
When calling dma_mapping_error(), the value of return variable rc is 0.
And when the call returns an unexpected value, rc is not set to a
negative errno. Thus, it will return 0 on the error path, and its
callers cannot detect the bug. This patch fixes the bug, assigning
"-ENOMEM" to err.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189041
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Sun, 4 Dec 2016 05:45:15 +0000 (13:45 +0800)]
atm: fix improper return value
It returns variable "error" when ioremap_nocache() returns a NULL
pointer. The value of "error" is 0 then, which will mislead the callers
to believe that there is no error. This patch fixes the bug, returning
"-ENOMEM".
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189021
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Sun, 4 Dec 2016 05:27:40 +0000 (13:27 +0800)]
net: irda: set error code on failures
When the calls to kzalloc() fail, the value of return variable ret may
be 0. 0 means success in this context. This patch fixes the bug,
assigning "-ENOMEM" to ret before calling kzalloc().
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188971
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Sun, 4 Dec 2016 04:15:44 +0000 (12:15 +0800)]
net: caif: remove ineffective check
The check of the return value of sock_register() is ineffective.
"if(!err)" seems to be a typo. It is better to propagate the error code
to the callers of caif_sktinit_module(). This patch removes the check
statment and directly returns the result of sock_register().
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188751
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Mon, 5 Dec 2016 18:34:38 +0000 (10:34 -0800)]
net: ping: check minimum size on ICMP header length
Prior to commit
c0371da6047a ("put iov_iter into msghdr") in v3.19, there
was no check that the iovec contained enough bytes for an ICMP header,
and the read loop would walk across neighboring stack contents. Since the
iov_iter conversion, bad arguments are noticed, but the returned error is
EFAULT. Returning EINVAL is a clearer error and also solves the problem
prior to v3.19.
This was found using trinity with KASAN on v3.18:
BUG: KASAN: stack-out-of-bounds in memcpy_fromiovec+0x60/0x114 at addr
ffffffc071077da0
Read of size 8 by task trinity-c2/9623
page:
ffffffbe034b9a08 count:0 mapcount:0 mapping: (null) index:0x0
flags: 0x0()
page dumped because: kasan: bad access detected
CPU: 0 PID: 9623 Comm: trinity-c2 Tainted: G BU 3.18.0-dirty #15
Hardware name: Google Tegra210 Smaug Rev 1,3+ (DT)
Call trace:
[<
ffffffc000209c98>] dump_backtrace+0x0/0x1ac arch/arm64/kernel/traps.c:90
[<
ffffffc000209e54>] show_stack+0x10/0x1c arch/arm64/kernel/traps.c:171
[< inline >] __dump_stack lib/dump_stack.c:15
[<
ffffffc000f18dc4>] dump_stack+0x7c/0xd0 lib/dump_stack.c:50
[< inline >] print_address_description mm/kasan/report.c:147
[< inline >] kasan_report_error mm/kasan/report.c:236
[<
ffffffc000373dcc>] kasan_report+0x380/0x4b8 mm/kasan/report.c:259
[< inline >] check_memory_region mm/kasan/kasan.c:264
[<
ffffffc00037352c>] __asan_load8+0x20/0x70 mm/kasan/kasan.c:507
[<
ffffffc0005b9624>] memcpy_fromiovec+0x5c/0x114 lib/iovec.c:15
[< inline >] memcpy_from_msg include/linux/skbuff.h:2667
[<
ffffffc000ddeba0>] ping_common_sendmsg+0x50/0x108 net/ipv4/ping.c:674
[<
ffffffc000dded30>] ping_v4_sendmsg+0xd8/0x698 net/ipv4/ping.c:714
[<
ffffffc000dc91dc>] inet_sendmsg+0xe0/0x12c net/ipv4/af_inet.c:749
[< inline >] __sock_sendmsg_nosec net/socket.c:624
[< inline >] __sock_sendmsg net/socket.c:632
[<
ffffffc000cab61c>] sock_sendmsg+0x124/0x164 net/socket.c:643
[< inline >] SYSC_sendto net/socket.c:1797
[<
ffffffc000cad270>] SyS_sendto+0x178/0x1d8 net/socket.c:1761
CVE-2016-8399
Reported-by: Qidan He <i@flanker017.me>
Fixes:
c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Sat, 3 Dec 2016 12:25:45 +0000 (20:25 +0800)]
atm: lanai: set error code when ioremap fails
In function lanai_dev_open(), when the call to ioremap() fails, the
value of return variable result is 0. 0 means no error in this context.
This patch fixes the bug, assigning "-ENOMEM" to result when ioremap()
returns a NULL pointer.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188791
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Sat, 3 Dec 2016 11:24:48 +0000 (19:24 +0800)]
net: usb: set error code when usb_alloc_urb fails
In function lan78xx_probe(), variable ret takes the errno code on
failures. However, when the call to usb_alloc_urb() fails, its value
will keeps 0. 0 indicates success in the context, which is inconsistent
with the execution result. This patch fixes the bug, assigning
"-ENOMEM" to ret when usb_alloc_urb() returns a NULL pointer.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188771
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Sat, 3 Dec 2016 11:33:23 +0000 (19:33 +0800)]
net: bridge: set error code on failure
Function br_sysfs_addbr() does not set error code when the call
kobject_create_and_add() returns a NULL pointer. It may be better to
return "-ENOMEM" when kobject_create_and_add() fails.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188781
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Suraj Deshmukh [Sat, 3 Dec 2016 07:59:26 +0000 (07:59 +0000)]
net: af_mpls.c add space before open parenthesis
Adding space after switch keyword before open
parenthesis for readability purpose.
This patch fixes the checkpatch.pl warning:
space required before the open parenthesis '('
Signed-off-by: Suraj Deshmukh <surajssd009005@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Sat, 3 Dec 2016 09:56:17 +0000 (17:56 +0800)]
netdev: broadcom: propagate error code
Function bnxt_hwrm_stat_ctx_alloc() always returns 0, even if the call
to _hwrm_send_message() fails. It may be better to propagate the errors
to the caller of bnxt_hwrm_stat_ctx_alloc().
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188661
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 5 Dec 2016 18:15:59 +0000 (13:15 -0500)]
Merge branch 'fib-suffix-length-fixes'
Alexander Duyck says:
====================
IPv4 FIB suffix length fixes
In reviewing the patch from Robert Shearman and looking over the code I
realized there were a few different bugs we were still carrying in the IPv4
FIB lookup code.
These two patches are based off of Robert's original patch, but take things
one step further by splitting them up to address two additional issues I
found.
So first have Robert's original patch which was addressing the fact that
us calling update_suffix in resize is expensive when it is called per add.
To address that I incorporated the core bit of the patch which was us
dropping the update_suffix call from resize.
The first patch in the series does a rename and fix on the push_suffix and
pull_suffix code. Specifically we drop the need to pass a leaf and
secondly we fix things so we pull the suffix as long as the value of the
suffix in the node is dropping.
The second patch addresses the original issue reported as well as
optimizing the code for the fact that update_suffix is only really meant to
go through and clean things up when we are decreasing a suffix. I had
originally added code for it to somehow cause an increase, but if we push
the suffix when a new leaf is added we only ever have to handle pulling
down the suffix with update_suffix so I updated the code to reflect that.
As far as side effects the only ones I think that will be obvious should be
the fact that some routes may be able to be found earlier since before we
relied on resize to update the suffix lengths, and now we are updating them
before we add or remove the leaf.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Thu, 1 Dec 2016 12:27:57 +0000 (07:27 -0500)]
ipv4: Drop suffix update from resize code
It has been reported that update_suffix can be expensive when it is called
on a large node in which most of the suffix lengths are the same. The time
required to add 200K entries had increased from around 3 seconds to almost
49 seconds.
In order to address this we need to move the code for updating the suffix
out of resize and instead just have it handled in the cases where we are
pushing a node that increases the suffix length, or will decrease the
suffix length.
Fixes:
5405afd1a306 ("fib_trie: Add tracking value for suffix length")
Reported-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Reviewed-by: Robert Shearman <rshearma@brocade.com>
Tested-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Thu, 1 Dec 2016 12:27:52 +0000 (07:27 -0500)]
ipv4: Drop leaf from suffix pull/push functions
It wasn't necessary to pass a leaf in when doing the suffix updates so just
drop it. Instead just pass the suffix and work with that.
Since we dropped the leaf there is no need to include that in the name so
the names are updated to node_push_suffix and node_pull_suffix.
Finally I noticed that the logic for pulling the suffix length back
actually had some issues. Specifically it would stop prematurely if there
was a longer suffix, but it was not as long as the original suffix. I
updated the code to address that in node_pull_suffix.
Fixes:
5405afd1a306 ("fib_trie: Add tracking value for suffix length")
Suggested-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Reviewed-by: Robert Shearman <rshearma@brocade.com>
Tested-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Sat, 3 Dec 2016 13:49:08 +0000 (21:49 +0800)]
net: dcb: set error code on failures
In function dcbnl_cee_fill(), returns the value of variable err on
errors. However, on some error paths (e.g. nla put fails), its value may
be 0. It may be better to explicitly set a negative errno to variable
err before returning.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188881
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 3 Dec 2016 21:13:27 +0000 (16:13 -0500)]
Merge tag 'batadv-net-for-davem-
20161202' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is another batman-adv bugfix:
- fix checking for failed allocation of TVLV blocks in TT local data,
by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 2 Dec 2016 21:34:37 +0000 (13:34 -0800)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This should be the last set of bugfixes for arm-soc in v4.9. None of
these are critical regressions, but it would be nice to still get them
merged.
- On the Juno platform, the idle latency was described wrong, leading
to suboptimal cpuidle tuning.
- Also on the same platform, PCI I/O space was set up incorrectly and
could not work.
- On the sti platform, a syntactically incorrect DT entry caused
warnings.
- The newly added 'gr8' platform has somewhat confusing file names,
which we rename for consistency"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: juno: fix cluster sleep state entry latency on all SoC versions
arm64: dts: juno: Correct PCI IO window
ARM: dts: STiH407-family: fix i2c nodes
ARM: gr8: Rename the DTSI and relevant DTS
Linus Torvalds [Fri, 2 Dec 2016 19:45:27 +0000 (11:45 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Lots more phydev and probe error path leaks in various drivers by
Johan Hovold.
2) Fix race in packet_set_ring(), from Philip Pettersson.
3) Use after free in dccp_invalid_packet(), from Eric Dumazet.
4) Signnedness overflow in SO_{SND,RCV}BUFFORCE, also from Eric
Dumazet.
5) When tunneling between ipv4 and ipv6 we can be left with the wrong
skb->protocol value as we enter the IPSEC engine and this causes all
kinds of problems. Set it before the output path does any
dst_output() calls, from Eli Cooper.
6) bcmgenet uses wrong device struct pointer in DMA API calls, fix from
Florian Fainelli.
7) Various netfilter nat bug fixes from FLorian Westphal.
8) Fix memory leak in ipvlan_link_new(), from Gao Feng.
9) Locking fixes, particularly wrt. socket lookups, in l2tp from
Guillaume Nault.
10) Avoid invoking rhash teardowns in atomic context by moving netlink
cb->done() dump completion from a worker thread. Fix from Herbert
Xu.
11) Buffer refcount problems in tun and macvtap on errors, from Jason
Wang.
12) We don't set Kconfig symbol DEFAULT_TCP_CONG properly when the user
selects BBR. Fix from Julian Wollrath.
13) Fix deadlock in transmit path on altera TSE driver, from Lino
Sanfilippo.
14) Fix unbalanced reference counting in dsa_switch_tree, from Nikita
Yushchenko.
15) tc_tunnel_key needs to be properly exported to userspace via uapi,
fix from Roi Dayan.
16) rds_tcp_init_net() doesn't unregister notifier in error path, fix
from Sowmini Varadhan.
17) Stale packet header pointer access after pskb_expand_head() in
genenve driver, fix from Sabrina Dubroca.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits)
net: avoid signed overflows for SO_{SND|RCV}BUFFORCE
geneve: avoid use-after-free of skb->data
tipc: check minimum bearer MTU
net: renesas: ravb: unintialized return value
sh_eth: remove unchecked interrupts for RZ/A1
net: bcmgenet: Utilize correct struct device for all DMA operations
NET: usb: qmi_wwan: add support for Telit LE922A PID 0x1040
cdc_ether: Fix handling connection notification
ip6_offload: check segs for NULL in ipv6_gso_segment.
RDS: TCP: unregister_netdevice_notifier() in error path of rds_tcp_init_net
Revert: "ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()"
ipv6: Set skb->protocol properly for local output
ipv4: Set skb->protocol properly for local output
packet: fix race condition in packet_set_ring
net: ethernet: altera: TSE: do not use tx queue lock in tx completion handler
net: ethernet: altera: TSE: Remove unneeded dma sync for tx buffers
net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks
net: ethernet: stmmac: platform: fix outdated function header
net: ethernet: stmmac: dwmac-meson8b: fix probe error path
net: ethernet: stmmac: dwmac-generic: fix probe error path
...
Eric Dumazet [Fri, 2 Dec 2016 17:44:53 +0000 (09:44 -0800)]
net: avoid signed overflows for SO_{SND|RCV}BUFFORCE
CAP_NET_ADMIN users should not be allowed to set negative
sk_sndbuf or sk_rcvbuf values, as it can lead to various memory
corruptions, crashes, OOM...
Note that before commit
82981930125a ("net: cleanups in
sock_setsockopt()"), the bug was even more serious, since SO_SNDBUF
and SO_RCVBUF were vulnerable.
This needs to be backported to all known linux kernels.
Again, many thanks to syzkaller team for discovering this gem.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Fri, 2 Dec 2016 15:49:29 +0000 (16:49 +0100)]
geneve: avoid use-after-free of skb->data
geneve{,6}_build_skb can end up doing a pskb_expand_head(), which
makes the ip_hdr(skb) reference we stashed earlier stale. Since it's
only needed as an argument to ip_tunnel_ecn_encap(), move this
directly in the function call.
Fixes:
08399efc6319 ("geneve: ensure ECN info is handled properly in all tx/rx paths")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubeček [Fri, 2 Dec 2016 08:33:41 +0000 (09:33 +0100)]
tipc: check minimum bearer MTU
Qian Zhang (张谦) reported a potential socket buffer overflow in
tipc_msg_build() which is also known as CVE-2016-8632: due to
insufficient checks, a buffer overflow can occur if MTU is too short for
even tipc headers. As anyone can set device MTU in a user/net namespace,
this issue can be abused by a regular user.
As agreed in the discussion on Ben Hutchings' original patch, we should
check the MTU at the moment a bearer is attached rather than for each
processed packet. We also need to repeat the check when bearer MTU is
adjusted to new device MTU. UDP case also needs a check to avoid
overflow when calculating bearer MTU.
Fixes:
b97bf3fd8f6a ("[TIPC] Initial merge")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reported-by: Qian Zhang (张谦) <zhangqian-c@360.cn>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 2 Dec 2016 19:02:13 +0000 (14:02 -0500)]
Merge tag 'linux-can-fixes-for-4.9-
20161201' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2016-12-02
this is a pull request for net/master.
There are two patches by Stephane Grosjean, who adds support for the new
PCAN-USB X6 USB interface to the pcan_usb driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 1 Dec 2016 20:57:44 +0000 (23:57 +0300)]
net: renesas: ravb: unintialized return value
We want to set the other "err" variable here so that we can return it
later. My version of GCC misses this issue but I caught it with a
static checker.
Fixes:
9f70eb339f52 ("net: ethernet: renesas: ravb: fix fixed-link phydev leaks")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Brandt [Thu, 1 Dec 2016 18:32:14 +0000 (13:32 -0500)]
sh_eth: remove unchecked interrupts for RZ/A1
When streaming a lot of data and the RZ/A1 can't keep up, some status bits
will get set that are not being checked or cleared which cause the
following messages and the Ethernet driver to stop working. This
patch fixes that issue.
irq 21: nobody cared (try booting with the "irqpoll" option)
handlers:
[<
c036b71c>] sh_eth_interrupt
Disabling IRQ #21
Fixes:
db893473d313a4ad ("sh_eth: Add support for r7s72100")
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 1 Dec 2016 17:45:45 +0000 (09:45 -0800)]
net: bcmgenet: Utilize correct struct device for all DMA operations
__bcmgenet_tx_reclaim() and bcmgenet_free_rx_buffers() are not using the
same struct device during unmap that was used for the map operation,
which makes DMA-API debugging warn about it. Fix this by always using
&priv->pdev->dev throughout the driver, using an identical device
reference for all map/unmap calls.
Fixes:
1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 2 Dec 2016 18:48:50 +0000 (10:48 -0800)]
Fix up a couple of field names in the CREDITS file
Ozgur Karatas reported that the very first entry in the CREDITS file had
the wrong tag for name (M: instead of N: - it happened when moving the
entry from the MAINTAINERS file, where 'M:' stands for "Maintainer").
And when I went looking, I found a couple of other cases of wrong
tagging too.
Reported-by: Ozgur Karatas <mueddib@yandex.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniele Palmas [Thu, 1 Dec 2016 15:52:05 +0000 (16:52 +0100)]
NET: usb: qmi_wwan: add support for Telit LE922A PID 0x1040
This patch adds support for PID 0x1040 of Telit LE922A.
The qmi adapter requires to have DTR set for proper working,
so QMI_WWAN_QUIRK_DTR has been enabled.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kristian Evensen [Thu, 1 Dec 2016 13:23:17 +0000 (14:23 +0100)]
cdc_ether: Fix handling connection notification
Commit
bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling")
introduced a work-around in usbnet_cdc_status() for devices that exported
cdc carrier on twice on connect. Before the commit, this behavior caused
the link state to be incorrect. It was assumed that all CDC Ethernet
devices would either export this behavior, or send one off and then one on
notification (which seems to be the default behavior).
Unfortunately, it turns out multiple devices sends a connection
notification multiple times per second (via an interrupt), even when
connection state does not change. This has been observed with several
different USB LAN dongles (at least), for example 13b1:0041 (Linksys).
After
bfe9b9d2df66, the link state has been set as down and then up for
each notification. This has caused a flood of Netlink NEWLINK messages and
syslog to be flooded with messages similar to:
cdc_ether 2-1:2.0 eth1: kevent 12 may have been dropped
This commit fixes the behavior by reverting usbnet_cdc_status() to how it
was before
bfe9b9d2df66. The work-around has been moved to a separate
status-function which is only called when a known, affect device is
detected.
v1->v2:
* Do not open-code netif_carrier_ok() (thanks Henning Schild).
* Call netif_carrier_off() instead of usb_link_change(). This prevents
calling schedule_work() twice without giving the work queue a chance to be
processed (thanks Bjørn Mork).
Fixes:
bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling")
Reported-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Artem Savkov [Thu, 1 Dec 2016 13:06:04 +0000 (14:06 +0100)]
ip6_offload: check segs for NULL in ipv6_gso_segment.
segs needs to be checked for being NULL in ipv6_gso_segment() before calling
skb_shinfo(segs), otherwise kernel can run into a NULL-pointer dereference:
[ 97.811262] BUG: unable to handle kernel NULL pointer dereference at
00000000000000cc
[ 97.819112] IP: [<
ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0
[ 97.825214] PGD 0 [ 97.827047]
[ 97.828540] Oops: 0000 [#1] SMP
[ 97.831678] Modules linked in: vhost_net vhost macvtap macvlan nfsv3 rpcsec_gss_krb5
nfsv4 dns_resolver nfs fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4
iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack
ipt_REJECT nf_reject_ipv4 tun ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter
bridge stp llc snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_intel
snd_hda_codec edac_mce_amd snd_hda_core edac_core snd_hwdep kvm_amd snd_seq kvm snd_seq_device
snd_pcm irqbypass snd_timer ppdev parport_serial snd parport_pc k10temp pcspkr soundcore parport
sp5100_tco shpchp sg wmi i2c_piix4 acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc
ip_tables xfs libcrc32c sr_mod cdrom sd_mod ata_generic pata_acpi amdkfd amd_iommu_v2 radeon
broadcom bcm_phy_lib i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops
ttm ahci serio_raw tg3 firewire_ohci libahci pata_atiixp drm ptp libata firewire_core pps_core
i2c_core crc_itu_t fjes dm_mirror dm_region_hash dm_log dm_mod
[ 97.927721] CPU: 1 PID: 3504 Comm: vhost-3495 Not tainted 4.9.0-7.el7.test.x86_64 #1
[ 97.935457] Hardware name: AMD Snook/Snook, BIOS ESK0726A 07/26/2010
[ 97.941806] task:
ffff880129a1c080 task.stack:
ffffc90001bcc000
[ 97.947720] RIP: 0010:[<
ffffffff816e52f9>] [<
ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0
[ 97.956251] RSP: 0018:
ffff88012fc43a10 EFLAGS:
00010207
[ 97.961557] RAX:
0000000000000000 RBX:
ffff8801292c8700 RCX:
0000000000000594
[ 97.968687] RDX:
0000000000000593 RSI:
ffff880129a846c0 RDI:
0000000000240000
[ 97.975814] RBP:
ffff88012fc43a68 R08:
ffff880129a8404e R09:
0000000000000000
[ 97.982942] R10:
0000000000000000 R11:
ffff880129a84076 R12:
00000020002949b3
[ 97.990070] R13:
ffff88012a580000 R14:
0000000000000000 R15:
ffff88012a580000
[ 97.997198] FS:
0000000000000000(0000) GS:
ffff88012fc40000(0000) knlGS:
0000000000000000
[ 98.005280] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 98.011021] CR2:
00000000000000cc CR3:
0000000126c5d000 CR4:
00000000000006e0
[ 98.018149] Stack:
[ 98.020157]
00000000ffffffff ffff88012fc43ac8 ffffffffa017ad0a 000000000000000e
[ 98.027584]
0000001300000000 0000000077d59998 ffff8801292c8700 00000020002949b3
[ 98.035010]
ffff88012a580000 0000000000000000 ffff88012a580000 ffff88012fc43a98
[ 98.042437] Call Trace:
[ 98.044879] <IRQ> [ 98.046803] [<
ffffffffa017ad0a>] ? tg3_start_xmit+0x84a/0xd60 [tg3]
[ 98.053156] [<
ffffffff815eeee0>] skb_mac_gso_segment+0xb0/0x130
[ 98.059158] [<
ffffffff815eefd3>] __skb_gso_segment+0x73/0x110
[ 98.064985] [<
ffffffff815ef40d>] validate_xmit_skb+0x12d/0x2b0
[ 98.070899] [<
ffffffff815ef5d2>] validate_xmit_skb_list+0x42/0x70
[ 98.077073] [<
ffffffff81618560>] sch_direct_xmit+0xd0/0x1b0
[ 98.082726] [<
ffffffff815efd86>] __dev_queue_xmit+0x486/0x690
[ 98.088554] [<
ffffffff8135c135>] ? cpumask_next_and+0x35/0x50
[ 98.094380] [<
ffffffff815effa0>] dev_queue_xmit+0x10/0x20
[ 98.099863] [<
ffffffffa09ce057>] br_dev_queue_push_xmit+0xa7/0x170 [bridge]
[ 98.106907] [<
ffffffffa09ce161>] br_forward_finish+0x41/0xc0 [bridge]
[ 98.113430] [<
ffffffff81627cf2>] ? nf_iterate+0x52/0x60
[ 98.118735] [<
ffffffff81627d6b>] ? nf_hook_slow+0x6b/0xc0
[ 98.124216] [<
ffffffffa09ce32c>] __br_forward+0x14c/0x1e0 [bridge]
[ 98.130480] [<
ffffffffa09ce120>] ? br_dev_queue_push_xmit+0x170/0x170 [bridge]
[ 98.137785] [<
ffffffffa09ce4bd>] br_forward+0x9d/0xb0 [bridge]
[ 98.143701] [<
ffffffffa09cfbb7>] br_handle_frame_finish+0x267/0x560 [bridge]
[ 98.150834] [<
ffffffffa09d0064>] br_handle_frame+0x174/0x2f0 [bridge]
[ 98.157355] [<
ffffffff8102fb89>] ? sched_clock+0x9/0x10
[ 98.162662] [<
ffffffff810b63b2>] ? sched_clock_cpu+0x72/0xa0
[ 98.168403] [<
ffffffff815eccf5>] __netif_receive_skb_core+0x1e5/0xa20
[ 98.174926] [<
ffffffff813659f9>] ? timerqueue_add+0x59/0xb0
[ 98.180580] [<
ffffffff815ed548>] __netif_receive_skb+0x18/0x60
[ 98.186494] [<
ffffffff815ee625>] process_backlog+0x95/0x140
[ 98.192145] [<
ffffffff815edccd>] net_rx_action+0x16d/0x380
[ 98.197713] [<
ffffffff8170cff1>] __do_softirq+0xd1/0x283
[ 98.203106] [<
ffffffff8170b2bc>] do_softirq_own_stack+0x1c/0x30
[ 98.209107] <EOI> [ 98.211029] [<
ffffffff8108a5c0>] do_softirq+0x50/0x60
[ 98.216166] [<
ffffffff815ec853>] netif_rx_ni+0x33/0x80
[ 98.221386] [<
ffffffffa09eeff7>] tun_get_user+0x487/0x7f0 [tun]
[ 98.227388] [<
ffffffffa09ef3ab>] tun_sendmsg+0x4b/0x60 [tun]
[ 98.233129] [<
ffffffffa0b68932>] handle_tx+0x282/0x540 [vhost_net]
[ 98.239392] [<
ffffffffa0b68c25>] handle_tx_kick+0x15/0x20 [vhost_net]
[ 98.245916] [<
ffffffffa0abacfe>] vhost_worker+0x9e/0xf0 [vhost]
[ 98.251919] [<
ffffffffa0abac60>] ? vhost_umem_alloc+0x40/0x40 [vhost]
[ 98.258440] [<
ffffffff81003a47>] ? do_syscall_64+0x67/0x180
[ 98.264094] [<
ffffffff810a44d9>] kthread+0xd9/0xf0
[ 98.268965] [<
ffffffff810a4400>] ? kthread_park+0x60/0x60
[ 98.274444] [<
ffffffff8170a4d5>] ret_from_fork+0x25/0x30
[ 98.279836] Code: 8b 93 d8 00 00 00 48 2b 93 d0 00 00 00 4c 89 e6 48 89 df 66 89 93 c2 00 00 00 ff 10 48 3d 00 f0 ff ff 49 89 c2 0f 87 52 01 00 00 <41> 8b 92 cc 00 00 00 48 8b 80 d0 00 00 00 44 0f b7 74 10 06 66
[ 98.299425] RIP [<
ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0
[ 98.305612] RSP <
ffff88012fc43a10>
[ 98.309094] CR2:
00000000000000cc
[ 98.312406] ---[ end trace
726a2c7a2d2d78d0 ]---
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sowmini Varadhan [Thu, 1 Dec 2016 12:44:43 +0000 (04:44 -0800)]
RDS: TCP: unregister_netdevice_notifier() in error path of rds_tcp_init_net
If some error is encountered in rds_tcp_init_net, make sure to
unregister_netdevice_notifier(), else we could trigger a panic
later on, when the modprobe from a netns fails.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eli Cooper [Thu, 1 Dec 2016 02:05:12 +0000 (10:05 +0800)]
Revert: "ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()"
This reverts commit
ae148b085876fa771d9ef2c05f85d4b4bf09ce0d
("ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()").
skb->protocol is now set in __ip_local_out() and __ip6_local_out() before
dst_output() is called. It is no longer necessary to do it for each tunnel.
Cc: stable@vger.kernel.org
Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eli Cooper [Thu, 1 Dec 2016 02:05:11 +0000 (10:05 +0800)]
ipv6: Set skb->protocol properly for local output
When xfrm is applied to TSO/GSO packets, it follows this path:
xfrm_output() -> xfrm_output_gso() -> skb_gso_segment()
where skb_gso_segment() relies on skb->protocol to function properly.
This patch sets skb->protocol to ETH_P_IPV6 before dst_output() is called,
fixing a bug where GSO packets sent through an ipip6 tunnel are dropped
when xfrm is involved.
Cc: stable@vger.kernel.org
Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eli Cooper [Thu, 1 Dec 2016 02:05:10 +0000 (10:05 +0800)]
ipv4: Set skb->protocol properly for local output
When xfrm is applied to TSO/GSO packets, it follows this path:
xfrm_output() -> xfrm_output_gso() -> skb_gso_segment()
where skb_gso_segment() relies on skb->protocol to function properly.
This patch sets skb->protocol to ETH_P_IP before dst_output() is called,
fixing a bug where GSO packets sent through a sit tunnel are dropped
when xfrm is involved.
Cc: stable@vger.kernel.org
Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Philip Pettersson [Wed, 30 Nov 2016 22:55:36 +0000 (14:55 -0800)]
packet: fix race condition in packet_set_ring
When packet_set_ring creates a ring buffer it will initialize a
struct timer_list if the packet version is TPACKET_V3. This value
can then be raced by a different thread calling setsockopt to
set the version to TPACKET_V1 before packet_set_ring has finished.
This leads to a use-after-free on a function pointer in the
struct timer_list when the socket is closed as the previously
initialized timer will not be deleted.
The bug is fixed by taking lock_sock(sk) in packet_setsockopt when
changing the packet version while also taking the lock at the start
of packet_set_ring.
Fixes:
f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Signed-off-by: Philip Pettersson <philip.pettersson@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 2 Dec 2016 17:15:26 +0000 (09:15 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"All architectures avoid memory corruption in an error path. ARM
prevents bogus acknowledgement of interrupts"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: use after free in kvm_ioctl_create_device()
KVM: arm/arm64: vgic: Don't notify EOI for non-SPIs
Linus Torvalds [Fri, 2 Dec 2016 17:12:44 +0000 (09:12 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"Here is the revert for the regression of the i2c-octeon driver I
mentioned last time. I wished for a bit more feedback, but all people
working actively on it are in need of this patch, so here it goes"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: octeon: thunderx: Limit register access retries"
Lino Sanfilippo [Wed, 30 Nov 2016 22:48:32 +0000 (23:48 +0100)]
net: ethernet: altera: TSE: do not use tx queue lock in tx completion handler
The driver already uses its private lock for synchronization between xmit
and xmit completion handler making the additional use of the xmit_lock
unnecessary.
Furthermore the driver does not set NETIF_F_LLTX resulting in xmit to be
called with the xmit_lock held and then taking the private lock while xmit
completion handler does the reverse, first take the private lock, then the
xmit_lock.
Fix these issues by not taking the xmit_lock in the tx completion handler.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lino Sanfilippo [Wed, 30 Nov 2016 22:48:31 +0000 (23:48 +0100)]
net: ethernet: altera: TSE: Remove unneeded dma sync for tx buffers
An explicit dma sync for device directly after mapping as well as an
explicit dma sync for cpu directly before unmapping is unnecessary and
costly on the hotpath. So remove these calls.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Fri, 2 Dec 2016 12:40:27 +0000 (13:40 +0100)]
default exported asm symbols to zero
With binutils-2.26 and before, a weak missing symbol was kept during the
final link, and a missing CRC for an export would lead to that CRC being
treated as zero implicitly. With binutils-2.27, the crc symbol gets
dropped, and any module trying to use it will fail to load.
This sets the weak CRC symbol to zero explicitly, making it defined in
vmlinux, which in turn lets us load the modules referring to that CRC.
The comment above the __CRC_SYMBOL macro suggests that this was always
the intention, although it also seems that all symbols defined in C have
a correct CRC these days, and only the exports that are now done in
assembly need this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Adam Borowski <kilobyte@angband.pl>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sudeep Holla [Wed, 16 Nov 2016 17:31:31 +0000 (17:31 +0000)]
arm64: dts: juno: fix cluster sleep state entry latency on all SoC versions
The core and the cluster sleep state entry latencies can't be same as
cluster sleep involves more work compared to core level e.g. shared
cache maintenance.
Experiments have shown on an average about 100us more latency for the
cluster sleep state compared to the core level sleep. This patch fixes
the entry latency for the cluster sleep state.
Fixes:
28e10a8f3a03 ("arm64: dts: juno: Add idle-states to device tree")
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: "Jon Medhurst (Tixy)" <tixy@linaro.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
David S. Miller [Fri, 2 Dec 2016 15:42:47 +0000 (10:42 -0500)]
Merge branch 'stmmac-probe-error-handling-and-phydev-leaks'
Johan Hovold says:
====================
net: stmmac: fix probe error handling and phydev leaks
This series fixes a number of issues with the stmmac-driver probe error
handling, which for example left clocks enabled after probe failures.
The final patch fixes a failure to deregister and free any fixed-link
PHYs that were registered during probe on probe errors and on driver
unbind. It also fixes a related of-node leak on late probe errors.
This series depends on the of_phy_deregister_fixed_link() helper that
was just merged to net.
As mentioned earlier, one staging driver also suffers from a similar
leak and can be fixed up once the above mentioned helper hits mainline.
Note that these patches have only been compile tested.
====================
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Wed, 30 Nov 2016 14:29:55 +0000 (15:29 +0100)]
net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks
Make sure to deregister and free any fixed-link phy registered during
probe on probe errors and on driver unbind by adding a new glue helper
function.
Drop the of-node reference taken in the same path also on late probe
errors (and not just on driver unbind) by moving the put from
stmmac_dvr_remove() to the new helper.
Fixes:
277323814e49 ("stmmac: add fixed-link device-tree support")
Fixes:
4613b279bee7 ("ethernet: stmicro: stmmac: add missing of_node_put
after calling of_parse_phandle")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Wed, 30 Nov 2016 14:29:54 +0000 (15:29 +0100)]
net: ethernet: stmmac: platform: fix outdated function header
Fix the OF-helper function header to reflect that the function no longer
has a platform-data parameter.
Fixes:
b0003ead75f3 ("stmmac: make stmmac_probe_config_dt return the
platform data struct")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Wed, 30 Nov 2016 14:29:53 +0000 (15:29 +0100)]
net: ethernet: stmmac: dwmac-meson8b: fix probe error path
Make sure to disable clocks before returning on late probe errors.
Fixes:
566e82516253 ("net: stmmac: add a glue driver for the Amlogic
Meson 8b / GXBB DWMAC")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Wed, 30 Nov 2016 14:29:52 +0000 (15:29 +0100)]
net: ethernet: stmmac: dwmac-generic: fix probe error path
Make sure to call any exit() callback to undo the effect of init()
before returning on late probe errors.
Fixes:
cf3f047b9af4 ("stmmac: move hw init in the probe (v2)")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Wed, 30 Nov 2016 14:29:51 +0000 (15:29 +0100)]
net: ethernet: stmmac: dwmac-rk: fix probe error path
Make sure to disable runtime PM, power down the PHY, and disable clocks
before returning on late probe errors.
Fixes:
27ffefd2d109 ("stmmac: dwmac-rk: create a new probe function")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Wed, 30 Nov 2016 14:29:50 +0000 (15:29 +0100)]
net: ethernet: stmmac: dwmac-sti: fix probe error path
Make sure to disable clocks before returning on late probe errors.
Fixes:
8387ee21f972 ("stmmac: dwmac-sti: turn setup callback into a
probe function")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Wed, 30 Nov 2016 14:29:49 +0000 (15:29 +0100)]
net: ethernet: stmmac: dwmac-socfpga: fix use-after-free on probe errors
Make sure to call stmmac_dvr_remove() before returning on late probe
errors so that memory is freed, clocks are disabled, and the netdev is
deregistered before its resources go away.
Fixes:
3c201b5a84ed ("net: stmmac: socfpga: Remove re-registration of
reset controller")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Wed, 30 Nov 2016 13:30:37 +0000 (14:30 +0100)]
net/rtnetlink: fix attribute name in nlmsg_size() comments
Use the correct attribute constant names IFLA_GSO_MAX_{SEGS,SIZE}
instead of IFLA_MAX_GSO_{SEGS,SIZE} for the comments int nlmsg_size().
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sven Eckelmann [Wed, 30 Nov 2016 20:47:09 +0000 (21:47 +0100)]
batman-adv: Check for alloc errors when preparing TT local data
batadv_tt_prepare_tvlv_local_data can fail to allocate the memory for the
new TVLV block. The caller is informed about this problem with the returned
length of 0. Not checking this value results in an invalid memory access
when either tt_data or tt_change is accessed.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Linus Torvalds [Fri, 2 Dec 2016 00:44:42 +0000 (16:44 -0800)]
Merge tag 'pci-v4.9-fixes-4' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"PCI fixes:
- Fix Read Completion Boundary setting, which fixes a boot failure on
IBM x3850 with Mellanox MT27500 ConnectX-3
- Update some MAINTAINERS entries and email addresses"
* tag 'pci-v4.9-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Set Read Completion Boundary to 128 iff Root Port supports it (_HPX)
PCI: Export pcie_find_root_port
PCI: designware-plat: Update author email
PCI: designware: Change maintainer to Joao Pinto
MAINTAINERS: Add devicetree binding to PCI i.MX6 entry
MAINTAINERS: Update Richard Zhu's email address
Alexander Duyck [Mon, 28 Nov 2016 15:42:29 +0000 (10:42 -0500)]
ixgbe/ixgbevf: Don't use lco_csum to compute IPv4 checksum
In the case of IPIP and SIT tunnel frames the outer transport header
offset is actually set to the same offset as the inner transport header.
This results in the lco_csum call not doing any checksum computation over
the inner IPv4/v6 header data.
In order to account for that I am updating the code so that we determine
the location to start the checksum ourselves based on the location of the
IPv4 header and the length.
Fixes:
b83e30104bd9 ("ixgbe/ixgbevf: Add support for GSO partial")
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Mon, 28 Nov 2016 15:42:23 +0000 (10:42 -0500)]
igb/igbvf: Don't use lco_csum to compute IPv4 checksum
In the case of IPIP and SIT tunnel frames the outer transport header
offset is actually set to the same offset as the inner transport header.
This results in the lco_csum call not doing any checksum computation over
the inner IPv4/v6 header data.
In order to account for that I am updating the code so that we determine
the location to start the checksum ourselves based on the location of the
IPv4 header and the length.
Fixes:
e10715d3e961 ("igb/igbvf: Add support for GSO partial")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
allan [Wed, 30 Nov 2016 08:29:08 +0000 (16:29 +0800)]
net: asix: Fix AX88772_suspend() USB vendor commands failure issues
The change fixes AX88772_suspend() USB vendor commands failure issues.
Signed-off-by: Allan Chou <allan@asix.com.tw>
Tested-by: Allan Chou <allan@asix.com.tw>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 1 Dec 2016 18:31:53 +0000 (10:31 -0800)]
Merge branch 'overlayfs-linus' of git://git./linux/kernel/git/mszeredi/vfs
Pull overlayfs fix from Miklos Szeredi:
"This fixes a regression introduced in 4.8"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix d_real() for stacked fs
Linus Torvalds [Thu, 1 Dec 2016 18:29:41 +0000 (10:29 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov: "We are disabling automatic
probing of BYD touchpads as it results in too many false positives,
and the hardware is not terribly popular and having the protocol
support does not result in significantly improved user experience.
We also change keycode for KEY_DATA to avoid clashing with
KEY_FASTREVERSE. Luckily this newish code is used by CEC framework
that is still in staging, so it is extremely unlikely that someone has
already started using this keycode"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: change KEY_DATA from 0x275 to 0x277
Input: psmouse - disable automatic probing of BYD touchpads
Nicolas Pitre [Wed, 30 Nov 2016 22:41:58 +0000 (17:41 -0500)]
kbuild: make sure autoksyms.h exists early
Some people are able to trigger a race where autoksyms.h is used before
its empty version is even created. Let's create it at the same time as
the directory holding it is created.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David S. Miller [Thu, 1 Dec 2016 16:35:49 +0000 (11:35 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2016-12-01
1) Change the error value when someone tries to run 32bit
userspace on a 64bit host from -ENOTSUPP to the userspace
exported -EOPNOTSUPP. Fix from Yi Zhao.
2) On inbound, ESN sequence numbers are already in network
byte order. So don't try to convert it again, this fixes
integrity verification for ESN. Fixes from Tobias Brunner.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 1 Dec 2016 16:04:41 +0000 (11:04 -0500)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
This is a large batch of Netfilter fixes for net, they are:
1) Three patches to fix NAT conversion to rhashtable: Switch to rhlist
structure that allows to have several objects with the same key.
Moreover, fix wrong comparison logic in nf_nat_bysource_cmp() as this is
expecting a return value similar to memcmp(). Change location of
the nat_bysource field in the nf_conn structure to avoid zeroing
this as it breaks interaction with SLAB_DESTROY_BY_RCU and lead us
to crashes. From Florian Westphal.
2) Don't allow malformed fragments go through in IPv6, drop them,
otherwise we hit GPF, patch from Florian Westphal.
3) Fix crash if attributes are missing in nft_range, from Liping Zhang.
4) Fix arptables 32-bits userspace 64-bits kernel compat, from Hongxu Jia.
5) Two patches from David Ahern to fix netfilter interaction with vrf.
From David Ahern.
6) Fix element timeout calculation in nf_tables, we take milliseconds
from userspace, but we use jiffies from kernelspace. Patch from
Anders K. Pedersen.
7) Missing validation length netlink attribute for nft_hash, from
Laura Garcia.
8) Fix nf_conntrack_helper documentation, we don't default to off
anymore for a bit of time so let's get this in sync with the code.
I know is late but I think these are important, specifically the NAT
bits, as they are mostly addressing fallout from recent changes. I also
read there are chances to have -rc8, if that is the case, that would
also give us a bit more time to test this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 30 Nov 2016 19:21:05 +0000 (22:21 +0300)]
KVM: use after free in kvm_ioctl_create_device()
We should move the ops->destroy(dev) after the list_del(&dev->vm_node)
so that we don't use "dev" after freeing it.
Fixes:
a28ebea2adc4 ("KVM: Protect device ops->create and list_add with kvm->lock")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Radim Krčmář [Thu, 1 Dec 2016 13:56:34 +0000 (14:56 +0100)]
Merge tag 'kvm-arm-for-4.9-rc7' of git://git./linux/kernel/git/kvmarm/kvmarm
KVM/ARM updates for v4.9-rc7
- Do not call kvm_notify_acked for PPIs
Stephane Grosjean [Thu, 1 Dec 2016 10:41:12 +0000 (11:41 +0100)]
can: peak: Add support for PCAN-USB X6 USB interface
This adds support for PEAK-System PCAN-USB X6 USB to CAN interface.
The CAN FD adapter PCAN-USB X6 allows the connection of up to 6 CAN FD
or CAN networks to a computer via USB. The interface is installed in an
aluminum profile casing and is shipped in versions with D-Sub connectors
or M12 circular connectors.
The PCAN-USB X6 registers in the USB sub-system as if 3x PCAN-USB-Pro FD
adapters were plugged. So, this patch:
- updates the PEAK_USB entry of the corresponding Kconfig file
- defines and adds the device id. of the PCAN-USB X6 (0x0014) into the
table of supported device ids
- defines and adds the new software structure implementing the PCAN-USB X6,
which is obviously a clone of the software structure implementing the
PCAN-USB Pro FD.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stephane Grosjean [Thu, 1 Dec 2016 10:41:11 +0000 (11:41 +0100)]
can: peak: Fix bittiming fields size in bits
This fixes the bitimings fields ranges supported by all the CAN-FD USB
interfaces of the PEAK-System CAN-FD adapters.
Very first development versions of the IP core API defined smaller TSGEx
and SJW fields for both nominal and data bittimings records than the
production versions. This patch fixes them by enlarging their sizes to
the actual values:
field: old size: fixed size:
nominal TSGEG1 6 8
nominal TSGEG2 4 7
nominal SJW 4 7
data TSGEG1 4 5
data TSGEG2 3 4
data SJW 2 4
Note that this has no other consequences than offering larger choice to
bitrate encoding.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Linus Torvalds [Thu, 1 Dec 2016 00:33:41 +0000 (16:33 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"7 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: fix false-positive WARN_ON() in truncate/invalidate for hugetlb
kasan: support use-after-scope detection
kasan: update kasan_global for gcc 7
lib/debugobjects: export for use in modules
zram: fix unbalanced idr management at hot removal
thp: fix corner case of munlock() of PTE-mapped THPs
mm, thp: propagation of conditional compilation in khugepaged.c
Kirill A. Shutemov [Wed, 30 Nov 2016 23:54:19 +0000 (15:54 -0800)]
mm: fix false-positive WARN_ON() in truncate/invalidate for hugetlb
Hugetlb pages have ->index in size of the huge pages (PMD_SIZE or
PUD_SIZE), not in PAGE_SIZE as other types of pages. This means we
cannot user page_to_pgoff() to check whether we've got the right page
for the radix-tree index.
Let's introduce page_to_index() which would return radix-tree index for
given page.
We will be able to get rid of this once hugetlb will be switched to
multi-order entries.
Fixes:
fc127da085c2 ("truncate: handle file thp")
Link: http://lkml.kernel.org/r/20161123093053.mjbnvn5zwxw5e6lk@black.fi.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Doug Nelson <doug.nelson@intel.com>
Tested-by: Doug Nelson <doug.nelson@intel.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Vyukov [Wed, 30 Nov 2016 23:54:16 +0000 (15:54 -0800)]
kasan: support use-after-scope detection
Gcc revision 241896 implements use-after-scope detection. Will be
available in gcc 7. Support it in KASAN.
Gcc emits 2 new callbacks to poison/unpoison large stack objects when
they go in/out of scope. Implement the callbacks and add a test.
[dvyukov@google.com: v3]
Link: http://lkml.kernel.org/r/1479998292-144502-1-git-send-email-dvyukov@google.com
Link: http://lkml.kernel.org/r/1479226045-145148-1-git-send-email-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org> [4.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Vyukov [Wed, 30 Nov 2016 23:54:13 +0000 (15:54 -0800)]
kasan: update kasan_global for gcc 7
kasan_global struct is part of compiler/runtime ABI. gcc revision
241983 has added a new field to kasan_global struct. Update kernel
definition of kasan_global struct to include the new field.
Without this patch KASAN is broken with gcc 7.
Link: http://lkml.kernel.org/r/1479219743-28682-1-git-send-email-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org> [4.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Wilson [Wed, 30 Nov 2016 23:54:10 +0000 (15:54 -0800)]
lib/debugobjects: export for use in modules
Drivers, or other modules, that use a mixture of objects (especially
objects embedded within other objects) would like to take advantage of
the debugobjects facilities to help catch misuse. Currently, the
debugobjects interface is only available to builtin drivers and requires
a set of EXPORT_SYMBOL_GPL for use by modules.
I am using the debugobjects in i915.ko to try and catch some invalid
operations on embedded objects. The problem currently only presents
itself across module unload so forcing i915 to be builtin is not an
option.
Link: http://lkml.kernel.org/r/20161122143039.6433-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Du, Changbin" <changbin.du@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Iwai [Wed, 30 Nov 2016 23:54:08 +0000 (15:54 -0800)]
zram: fix unbalanced idr management at hot removal
The zram hot removal code calls idr_remove() even when zram_remove()
returns an error (typically -EBUSY). This results in a leftover at the
device release, eventually leading to a crash when the module is
reloaded.
As described in the bug report below, the following procedure would
cause an Oops with zram:
- provision three zram devices via modprobe zram num_devices=3
- configure a size for each device
+ echo "1G" > /sys/block/$zram_name/disksize
- mkfs and mount zram0 only
- attempt to hot remove all three devices
+ echo 2 > /sys/class/zram-control/hot_remove
+ echo 1 > /sys/class/zram-control/hot_remove
+ echo 0 > /sys/class/zram-control/hot_remove
- zram0 removal fails with EBUSY, as expected
- unmount zram0
- try zram0 hot remove again
+ echo 0 > /sys/class/zram-control/hot_remove
- fails with ENODEV (unexpected)
- unload zram kernel module
+ completes successfully
- zram0 device node still exists
- attempt to mount /dev/zram0
+ mount command is killed
+ following BUG is encountered
BUG: unable to handle kernel paging request at
ffffffffa0002ba0
IP: get_disk+0x16/0x50
Oops: 0000 [#1] SMP
CPU: 0 PID: 252 Comm: mount Not tainted 4.9.0-rc6 #176
Call Trace:
exact_lock+0xc/0x20
kobj_lookup+0xdc/0x160
get_gendisk+0x2f/0x110
__blkdev_get+0x10c/0x3c0
blkdev_get+0x19d/0x2e0
blkdev_open+0x56/0x70
do_dentry_open.isra.19+0x1ff/0x310
vfs_open+0x43/0x60
path_openat+0x2c9/0xf30
do_filp_open+0x79/0xd0
do_sys_open+0x114/0x1e0
SyS_open+0x19/0x20
entry_SYSCALL_64_fastpath+0x13/0x94
This patch adds the proper error check in hot_remove_store() not to call
idr_remove() unconditionally.
Fixes:
17ec4cd98578 ("zram: don't call idr_remove() from zram_remove()")
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=
1010970
Link: http://lkml.kernel.org/r/20161121132140.12683-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Reported-by: David Disseldorp <ddiss@suse.de>
Tested-by: David Disseldorp <ddiss@suse.de>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org> [4.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Wed, 30 Nov 2016 23:54:05 +0000 (15:54 -0800)]
thp: fix corner case of munlock() of PTE-mapped THPs
The following program triggers BUG() in munlock_vma_pages_range():
// autogenerated by syzkaller (http://github.com/google/syzkaller)
#include <sys/mman.h>
int main()
{
mmap((void*)0x20105000ul, 0xc00000ul, 0x2ul, 0x2172ul, -1, 0);
mremap((void*)0x201fd000ul, 0x4000ul, 0xc00000ul, 0x3ul, 0x203f0000ul);
return 0;
}
The test-case constructs the situation when munlock_vma_pages_range()
finds PTE-mapped THP-head in the middle of page table and, by mistake,
skips HPAGE_PMD_NR pages after that.
As result, on the next iteration it hits the middle of PMD-mapped THP
and gets upset seeing mlocked tail page.
The solution is only skip HPAGE_PMD_NR pages if the THP was mlocked
during munlock_vma_page(). It would guarantee that the page is
PMD-mapped as we never mlock PTE-mapeed THPs.
Fixes:
e90309c9f772 ("thp: allow mlocked THP again")
Link: http://lkml.kernel.org/r/20161115132703.7s7rrgmwttegcdh4@black.fi.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérémy Lefaure [Wed, 30 Nov 2016 23:54:02 +0000 (15:54 -0800)]
mm, thp: propagation of conditional compilation in khugepaged.c
Commit
b46e756f5e47 ("thp: extract khugepaged from mm/huge_memory.c")
moved code from huge_memory.c to khugepaged.c. Some of this code should
be compiled only when CONFIG_SYSFS is enabled but the condition around
this code was not moved into khugepaged.c.
The result is a compilation error when CONFIG_SYSFS is disabled:
mm/built-in.o: In function `khugepaged_defrag_store': khugepaged.c:(.text+0x2d095): undefined reference to `single_hugepage_flag_store'
mm/built-in.o: In function `khugepaged_defrag_show': khugepaged.c:(.text+0x2d0ab): undefined reference to `single_hugepage_flag_show'
This commit adds the #ifdef CONFIG_SYSFS around the code related to
sysfs.
Link: http://lkml.kernel.org/r/20161114203448.24197-1-jeremy.lefaure@lse.epita.fr
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 30 Nov 2016 23:15:49 +0000 (15:15 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two small fixes for MIPI PLLs on sunxi devices and a build fix for a
Broadcom clk driver having unmet dependencies"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm: Fix unmet Kconfig dependencies for CLK_BCM_63XX
clk: sunxi-ng: enable so-said LDOs for A33 SoC's pll-mipi clock
clk: sunxi-ng: sun6i-a31: Enable PLL-MIPI LDOs when ungating it
Jeremy Linton [Tue, 29 Nov 2016 20:45:10 +0000 (14:45 -0600)]
arm64: dts: juno: Correct PCI IO window
The PCIe root complex on Juno translates the MMIO mapped
at 0x5f800000 to the PIO address range starting at 0
(which is common because PIO addresses are generally < 64k).
Correct the DT to reflect this.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Jason Wang [Wed, 30 Nov 2016 05:17:52 +0000 (13:17 +0800)]
macvtap: handle ubuf refcount correctly when meet errors
We trigger uarg->callback() immediately after we decide do datacopy
even if caller want to do zerocopy. This will cause the callback
(vhost_net_zerocopy_callback) decrease the refcount. But when we meet
an error afterwards, the error handling in vhost handle_tx() will try
to decrease it again. This is wrong and fix this by delay the
uarg->callback() until we're sure there's no errors.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Wed, 30 Nov 2016 05:17:51 +0000 (13:17 +0800)]
tun: handle ubuf refcount correctly when meet errors
We trigger uarg->callback() immediately after we decide do datacopy
even if caller want to do zerocopy. This will cause the callback
(vhost_net_zerocopy_callback) decrease the refcount. But when we meet
an error afterwards, the error handling in vhost handle_tx() will try
to decrease it again. This is wrong and fix this by delay the
uarg->callback() until we're sure there's no errors.
Reported-by: wangyunjian <wangyunjian@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Grygorii Strashko [Tue, 29 Nov 2016 22:27:03 +0000 (16:27 -0600)]
net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during resume
netif_set_real_num_tx/rx_queues() are required to be called with rtnl_lock
taken, otherwise ASSERT_RTNL() warning will be triggered - which happens
now during System resume from suspend:
cpsw_resume()
|- cpsw_ndo_open()
|- netif_set_real_num_tx/rx_queues()
|- ASSERT_RTNL();
Hence, fix it by surrounding cpsw_ndo_open() by rtnl_lock/unlock() calls.
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Fixes: commit
e05107e6b747 ("net: ethernet: ti: cpsw: add multi queue support")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Tested-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 30 Nov 2016 19:53:50 +0000 (11:53 -0800)]
Merge tag 'pwm/for-4.9' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"This contains two one-line fixes for issues that were introduced in
v4.9-rc1"
* tag 'pwm/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Fix device reference leak
pwm: meson: Add missing spin_lock_init()
Josef Bacik [Tue, 29 Nov 2016 17:27:09 +0000 (12:27 -0500)]
bpf: fix states equal logic for varlen access
If we have a branch that looks something like this
int foo = map->value;
if (condition) {
foo += blah;
} else {
foo = bar;
}
map->array[foo] = baz;
We will incorrectly assume that the !condition branch is equal to the condition
branch as the register for foo will be UNKNOWN_VALUE in both cases. We need to
adjust this logic to only do this if we didn't do a varlen access after we
processed the !condition branch, otherwise we have different ranges and need to
check the other branch as well.
Fixes:
484611357c19 ("bpf: allow access into map value arrays")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hongxu Jia [Wed, 30 Nov 2016 02:56:26 +0000 (21:56 -0500)]
netfilter: arp_tables: fix invoking 32bit "iptable -P INPUT ACCEPT" failed in 64bit kernel
Since
09d9686047db ("netfilter: x_tables: do compat validation via
translate_table"), it used compatr structure to assign newinfo
structure. In translate_compat_table of ip_tables.c and ip6_tables.c,
it used compatr->hook_entry to replace info->hook_entry and
compatr->underflow to replace info->underflow, but not do the same
replacement in arp_tables.c.
It caused invoking 32-bit "arptbale -P INPUT ACCEPT" failed in 64bit
kernel.
--------------------------------------
root@qemux86-64:~# arptables -P INPUT ACCEPT
root@qemux86-64:~# arptables -P INPUT ACCEPT
ERROR: Policy for `INPUT' offset 448 != underflow 0
arptables: Incompatible with this kernel
--------------------------------------
Fixes:
09d9686047db ("netfilter: x_tables: do compat validation via translate_table")
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
David S. Miller [Wed, 30 Nov 2016 19:33:44 +0000 (14:33 -0500)]
Merge tag 'wireless-drivers-for-davem-2016-11-29' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.9
mwifiex
* properly terminate SSIDs so that uninitalised memory is not printed
====================
Signed-off-by: David S. Miller <davem@davemloft.net>