OSDN Git Service
Luiz Capitulino [Fri, 28 Aug 2009 18:27:19 +0000 (15:27 -0300)]
monitor: Port handler_7 to use QDict
This commit ports command handlers that receive seven arguments to
use the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:18 +0000 (15:27 -0300)]
monitor: Port handler_6 to use QDict
This commit ports command handlers that receive six arguments to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:17 +0000 (15:27 -0300)]
monitor: Port handler_5 to use QDict
This commit ports command handlers that receive five arguments to use
the new monitor's dictionary.
Note that GET_TLONG() and GET_TPHYSADDR() macros are not used anymore.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:16 +0000 (15:27 -0300)]
monitor: Port handler_4 to use QDict
This commit ports command handlers that receive four arguments to use
the new monitor's dictionary.
Note that GET_TLONG() and GET_TPHYSADDR() macros are not used anymore.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:15 +0000 (15:27 -0300)]
monitor: Port handler_3 to use QDict
This commit ports command handlers that receive three arguments to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:14 +0000 (15:27 -0300)]
monitor: Port handler_2 to use QDict
This commit ports command handlers that receive two arguments to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:13 +0000 (15:27 -0300)]
monitor: Port handler_1 to use QDict
This commit ports command handlers that receive one argument to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:12 +0000 (15:27 -0300)]
monitor: Port handler_0 to use QDict
This commit ports command handlers that receive no arguments to use
the new monitor's dictionary.
It might seem no sense to do this, as the handlers have no arguments,
but at the end of this porting work all handlers will have the same
structure.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:11 +0000 (15:27 -0300)]
monitor: Export QDict header
Command handlers will have to use QDict functions, so export
qdict.h through monitor.h.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:10 +0000 (15:27 -0300)]
monitor: Setup a QDict with arguments to handlers
With this commit monitor_handle_command() will be able to setup a
QDict with arguments to command handlers.
However, the current 'args[]' method is still being used, next
changes will port commands to get their arguments from the dictionary.
Two changes are worth noting:
1. The '/' argument type always adds the following standard keys in the
dictionary: 'count', 'format' and 'size'. This way, the argument
name used in the 'args_type' string doesn't matter
2. The optional argument type '?' doesn't need to pass the additional
'has_arg' argument, hanlders can do the same check with qdict_haskey()
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:09 +0000 (15:27 -0300)]
monitor: New format for handlers argument types
Current handlers argument types, as defined in qemu-monitor.hx file,
are a sequence of chars where each one represents one argument type
of the command handler. The number of chars is also used to know how
many arguments a given handler accepts.
This commit defines a new format, which makes mandatory the use of
a name for each argument.
For example, do_eject() command handler is currently defined as:
{ "eject", "-fB", do_eject, ... }
With the new format it becomes:
{ "eject", "force:-f,filename:B", do_eject, ... }
This way the Monitor will be capable of setting up a dictionary, using
each argument's name as the key and the argument itself as the value.
This commit also adds two new functions: key_get_info() and
next_arg_type(), both are used to parse the new format.
Currently key_get_info() consumes the 'key' part of the new format and
discards it, this way the current parsing code is not affected by this
change.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:08 +0000 (15:27 -0300)]
Add wrappers to functions used by the Monitor
Some functions exported to be used by the Monitor as command
handlers are also called in other places as regular functions.
When those functions got ported to use the Monitor dictionary
to pass argments, the callers will have to setup a dictionary
to be able to call them.
To avoid this problem, this commit add wrappers to those functions,
so that we change the wrapper to accept the dictionary, letting
the current functions as is.
The following wrappers are being added:
- do_help_cmd()
- do_pci_device_hot_remove()
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:07 +0000 (15:27 -0300)]
Introduce QDict
QDict is a high-level dictionary data type that can be used to store a
collection of QObjects. A unique key is associated with only one
QObject.
The following functions are available:
- qdict_new() Create a new QDict
- qdict_put() Add a new 'key:object' pair
- qdict_get() Get the QObject of a given key
- qdict_del() Delete a 'key:object' pair
- qdict_size() Return the size of the dictionary
- qdict_haskey() Check if a given 'key' exists
Some high-level helpers to operate on QStrings and QInts objects
are also provided.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:06 +0000 (15:27 -0300)]
Introduce QString
QString is a high-level data type that can be used to represent
C strings.
The following functions are available:
- qstring_from_str() Create a new QString
- qstring_get_str() Get a pointer to the stored string
Note that qstring_get_str() is too low-level for a data type like
this, but it's interesting for quick read-only accesses.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:05 +0000 (15:27 -0300)]
Introduce QInt
QInt is a high-level data type that can be used to represent integers,
internally it stores an int64_t value.
The following functions are available:
- qint_from_int() Create a new QInt
- qint_get_int() Get the stored integer
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Aug 2009 18:27:04 +0000 (15:27 -0300)]
Introduce QObject
This commit introduces the qobject.h header file, it contains
basic QObject definitions and helper macros.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Fri, 28 Aug 2009 14:37:42 +0000 (16:37 +0200)]
ide: move cmd+irq from IDEState to IDEBus.
These variables are per bus, not per drive. Lets move them and
cleanup things a bit. And fix the cmd migration bug for real.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Fri, 28 Aug 2009 13:47:03 +0000 (15:47 +0200)]
ide: pass down DriveInfo instead of BlockDriverState
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Thu, 27 Aug 2009 17:51:16 +0000 (19:51 +0200)]
Support for multiple -monitor devices
Rebased version of Anthony's patch: Allow to specify more than one
monitor terminal via the -monitor command line switch. This is
particularly useful when libvirt or some other management tool already
occupies the primary monitor but you need another one for debugging.
The current clumsy workaround is to multiplex such additional terminals
over a qemu character device (e.g. -serial mon:<device>).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Wed, 26 Aug 2009 10:47:04 +0000 (12:47 +0200)]
net: Fix send queue ordering
Ensure that packets enqueued for delayed delivery are dequeued in FIFO
order. At least one simplistic guest TCP/IP stack became unhappy due to
sporadically reordered packet streams.
At this chance, switch the send queue implementation to TAILQ.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Glauber Costa [Tue, 25 Aug 2009 22:13:36 +0000 (18:13 -0400)]
do not issue ioctl from within the io thread
According to Documentation/kvm/api.txt, (and well, to common sense),
we should not be calling vcpu ioctls from within the iothread.
Since vcpu initialization issues a vcpu ioctl, move it a little bit
further in time to prevent it.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 17:25:15 +0000 (19:25 +0200)]
Delay sighandler_setup()
If we are using --serial telnet:0:5555,server or similar, ^C will not
kill qemu. We need to first connect using telnet, and the the ^C takes
effect.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Thu, 27 Aug 2009 12:31:24 +0000 (18:01 +0530)]
Remove typedef for bool from eepro100.c
eepro100.c shouldn't have the need to do this in its local header file.
And I recently started getting this:
$ make -j3
...
CC x86_64-softmmu/eepro100.o
/home/amit/src/qemu/hw/eepro100.c:112: error: two or more data types
in declaration specifiers
/home/amit/src/qemu/hw/eepro100.c:112: warning: useless type name in
empty declaration
make[1]: *** [eepro100.o] Error 1
so just remove the typedef and include <stdbool.h> instead.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andre Przywara [Fri, 28 Aug 2009 08:49:57 +0000 (10:49 +0200)]
add documentation for multi-core features
extend QEMU's internal help and man page to cover the recently
added multi-core feature.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:27 +0000 (15:28 +0200)]
piix3: use new vmstate infrastructure
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:26 +0000 (15:28 +0200)]
i440fx: use new vmstate infrastructure
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:25 +0000 (15:28 +0200)]
VMState: Fix sub-structs versioning
We can't check the version in a substruct, it is not stored anywhere
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:24 +0000 (15:28 +0200)]
Update SaveVM versions
Now that we have all fields belonging to a PCIDevice, save each field
on the device that it belongs. This means moving pci_irq_levels
from PCII440FXState to PIIX3State.
Old formats are loaded, but we only save on the new saner format.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:23 +0000 (15:28 +0200)]
pci_irq_levels[] belong to PIIX3State
With previous cleanups, now it is possible to put it where it belongs
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:22 +0000 (15:28 +0200)]
Save irq_state into PCII440FXState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:21 +0000 (15:28 +0200)]
We can add piix3_dev now to PIIX3IrqState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:20 +0000 (15:28 +0200)]
Fold piix3_init() intto i440fx_init
i440fx_init will now work properly if we don't setup piix3
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:19 +0000 (15:28 +0200)]
Introduce PIIX3IrqState for piix3 irq's state
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:18 +0000 (15:28 +0200)]
Create PIIX3State instead of using PCIDevice for PIIX3
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:17 +0000 (15:28 +0200)]
We want the argument pass to set_irq to be opaque
piix_pci want to pass more things that the pic
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:16 +0000 (15:28 +0200)]
Move smm_enabled and isa_memory_mappings to PCII440FXState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:15 +0000 (15:28 +0200)]
Use PCII440FXState instead of generic PCIDevice
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:14 +0000 (15:28 +0200)]
low_set_irq is not used anywhere
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:13 +0000 (15:28 +0200)]
Split piix4 support from piix_pci.c
Now mips_malta uses piix4 and pc's use piix_pci definitions
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Fri, 28 Aug 2009 13:28:12 +0000 (15:28 +0200)]
piix4 don't use pci_irq_levels at all
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Edgar E. Iglesias [Fri, 4 Sep 2009 08:38:59 +0000 (10:38 +0200)]
microblaze: Trap on illegal load/store sizes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Fri, 4 Sep 2009 07:40:49 +0000 (09:40 +0200)]
microblaze: Correct FPU decoding masks.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 20:28:21 +0000 (22:28 +0200)]
microblaze: Compute masks for alignment checks at translation time.
Thanks to Blue Swirl for reporting.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 11:25:09 +0000 (13:25 +0200)]
microblaze: Trap on bus accesses to unmapped areas.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 11:04:02 +0000 (13:04 +0200)]
microblaze: MMU shows more respect to synthesis config.
The microblaze MMU can be synthesized in different configurations.
Have the MMU model show more respect to the chosen configuration.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 10:59:46 +0000 (12:59 +0200)]
microblaze: Trap on unaligned data accesses.
Untested...
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 10:52:01 +0000 (12:52 +0200)]
microblaze: Trap on divizions by zero.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 09:18:55 +0000 (11:18 +0200)]
microblaze: Correct mfs into r0.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 09:12:30 +0000 (11:12 +0200)]
microblaze: Catch illegal insns and privilege violations.
Raise illegal instruction exceptions when executing instructions that
require units not available on the particulare microblaze configuration.
Also trap priviliege violations made by userspace.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 08:25:00 +0000 (10:25 +0200)]
microblaze: Add infrastructure for supporting hw exceptions.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 08:15:17 +0000 (10:15 +0200)]
microblaze: Clear exception in dslot ESR bit if not in dslot.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Thu, 3 Sep 2009 08:13:08 +0000 (10:13 +0200)]
microblaze: Correct MMU debug log.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Kirill A. Shutemov [Wed, 2 Sep 2009 15:18:04 +0000 (18:18 +0300)]
Fix warning on x86_64
audio/esdaudio.c: In function 'qesd_thread_out':
audio/esdaudio.c:136: error: format '%d' expects type 'int', but
argument 3 has type 'ssize_t'
audio/esdaudio.c: In function 'qesd_thread_in':
audio/esdaudio.c:366: error: format '%d' expects type 'int', but
argument 3 has type 'ssize_t'
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: malc <av1474@comtv.ru>
Blue Swirl [Mon, 31 Aug 2009 19:30:21 +0000 (19:30 +0000)]
Sparc32: port sun4c interrupt controller to VMState design
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Mon, 31 Aug 2009 19:30:18 +0000 (19:30 +0000)]
Sparc32: port timers to VMState design
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Mon, 31 Aug 2009 19:30:17 +0000 (19:30 +0000)]
Sparc32: timer field is never NULL
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Mon, 31 Aug 2009 19:30:15 +0000 (19:30 +0000)]
Add VMState support for ptimers
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Artyom Tarasenko [Mon, 31 Aug 2009 17:03:51 +0000 (19:03 +0200)]
esp (sparc32) Extra scsi data.
> ESP: Message Accepted (12)
> ESP: Transfer status (sense=0)
> ESP: read reg[5]: 0x20
> ESP: read reg[4]: 0x07
> ESP: read reg[7]: 0x02
> Extra scsi data. Fatal error.
It looks like "Message Accepted" shouldn't write a response. At least
ESP_RFLAGS must definetely be 0. With the following fix OBP goes one
step further:
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Stefan Weil [Mon, 31 Aug 2009 14:29:34 +0000 (16:29 +0200)]
Fix compiler warnings
Starting with commit
df7a86ed735eafefbd046c8cad7134652fe3f600,
mingw32 builds result in a compiler warning for dns_addr:
CC slirp/slirp.o
/home/stefan/src/qemu/savannah/qemu/slirp/slirp.c:50: warning: missing braces around initializer
/home/stefan/src/qemu/savannah/qemu/slirp/slirp.c:50: warning: (near initialization for ‘dns_addr.S_un’)
Removing the assignment fixes the warning without the need of special code
for mingw32 (and also saves some bytes in the resulting binary).
To fix another potential compiler warning, the missing 'static'
attribute was added.
The same changes were applied to dns_addr_time.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Mon, 31 Aug 2009 15:14:40 +0000 (15:14 +0000)]
Fix breakage due to __thread
Thread-local storage is not supported on all hosts.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 29 Aug 2009 13:37:34 +0000 (16:37 +0300)]
Fix gcc 3 warning: comparison is always true due to limited range of data type
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 29 Aug 2009 13:37:26 +0000 (16:37 +0300)]
Fix gcc 3 warning about uninitialized variable
If nb_sectors is 0, cluster_offset will not be initialized.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 29 Aug 2009 13:37:09 +0000 (16:37 +0300)]
Sparc32: port Slavio misc devices to VMState design
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 29 Aug 2009 13:36:58 +0000 (16:36 +0300)]
Sparc32: port ECC memory controller to VMState design
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 28 Aug 2009 20:46:21 +0000 (20:46 +0000)]
Sparc32: port IOMMU to VMState design
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 28 Aug 2009 20:46:15 +0000 (20:46 +0000)]
Sparc32: port DMA controller to VMState design
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 28 Aug 2009 20:43:01 +0000 (20:43 +0000)]
Sparc32: port TCX to VMState design
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 28 Aug 2009 20:22:52 +0000 (20:22 +0000)]
Sparc32: port interrupt controller to VMState design
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 28 Aug 2009 19:47:11 +0000 (19:47 +0000)]
Update OpenBIOS images to r569
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 28 Aug 2009 19:12:16 +0000 (19:12 +0000)]
Suppress kraxelisms
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 28 Aug 2009 19:04:13 +0000 (19:04 +0000)]
Fix Sparc64 breakage: add dummy ISA irqs
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 28 Aug 2009 18:30:54 +0000 (18:30 +0000)]
Fix merge of
59f2a78793b6d17634f39646d604e84af51e0919
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Stefan Weil [Fri, 28 Aug 2009 12:39:31 +0000 (14:39 +0200)]
Don't compile aio code if CONFIG_LINUX_AIO is undefined
This patch fixes linker errors when building QEMU without Linux AIO support.
It is based on suggestions from malc and Kevin Wolf.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
malc [Fri, 28 Aug 2009 10:33:43 +0000 (14:33 +0400)]
Fix sb16 breakage due to unassigned s->irq
Signed-off-by: malc <av1474@comtv.ru>
malc [Fri, 28 Aug 2009 10:33:10 +0000 (14:33 +0400)]
Fix formatting
Signed-off-by: malc <av1474@comtv.ru>
Anthony Liguori [Fri, 28 Aug 2009 01:55:01 +0000 (20:55 -0500)]
Merge commit 'linux-user/linux-user-for-upstream' into staging
Anthony Liguori [Tue, 25 Aug 2009 22:21:56 +0000 (17:21 -0500)]
Relax pthreads check to avoid win32
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:43:00 +0000 (18:43 +0200)]
e1000 cleanup
Remove un needed casts from void *.
Use DO_UPCAST() instead of blind casts
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:59 +0000 (18:42 +0200)]
pcnet: Add pci_pcnet_{save/load} functions, then remove PCNetState pci_dev field
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:58 +0000 (18:42 +0200)]
pcnet: remove useless casts This are casts to the very type of the function
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:57 +0000 (18:42 +0200)]
pcnet: Change casts to DO_UPCAST() for PCIPCNetState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:56 +0000 (18:42 +0200)]
Add pci_cirrus_vga_{save/load} functions, then remove vga.pci_dev use
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:55 +0000 (18:42 +0200)]
cirrus_vga: Change casts to DO_UPCAST() for PCICirrusVGAState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:54 +0000 (18:42 +0200)]
cirrus_vga: remove pointless cast from void *
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:53 +0000 (18:42 +0200)]
Add pci_ne2000_{save/load} functions, then remove pci_dev NE2000State field
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:52 +0000 (18:42 +0200)]
We need PCINE2000State for save/load functions
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:51 +0000 (18:42 +0200)]
ne2000: Change casts to DO_UPCAST() for PCINE2000State
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:50 +0000 (18:42 +0200)]
ne2000: pci_dev has this very value with the right type
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:49 +0000 (18:42 +0200)]
ne2000: remove casts from void *
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:48 +0000 (18:42 +0200)]
usb-ohci: Change casts to DO_UPCAST() for OHCIPCIState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:47 +0000 (18:42 +0200)]
Everything outside of vga.c should use VGACommonState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:46 +0000 (18:42 +0200)]
vga: Rename vga_state -> vga
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:45 +0000 (18:42 +0200)]
Introduce vga_common_reset() to be able to typcheck vga_reset()
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:44 +0000 (18:42 +0200)]
lsi53c895a: LSIState is a DeviceHost
Go figure.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:43 +0000 (18:42 +0200)]
lsi53c895a: rename PCIDevice field from pci_dev to dev (consistence)
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:42 +0000 (18:42 +0200)]
lsi53c895a: use DO_UPCAST to cast from PCIDevice
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:41 +0000 (18:42 +0200)]
lsi53c895a: remove pointless cast from void *
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:40 +0000 (18:42 +0200)]
rtl8139: remove pointless cast from void *
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:39 +0000 (18:42 +0200)]
rtl8139: Remove unneeded double indirection of PCIRTL8139State
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 24 Aug 2009 16:42:37 +0000 (18:42 +0200)]
eepro100: Remove unused indirection of PCIDevice
Once there, there is no way that we don't have a PCI Device at save/load time. Remove the check
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>