OSDN Git Service
Michael S. Tsirkin [Wed, 18 Jun 2014 14:50:07 +0000 (17:50 +0300)]
qapi: fix input visitor bugs
Remove dead code. Reset errno to 0 before each strtoull call, as the
man page requires.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Michael S. Tsirkin [Tue, 17 Jun 2014 19:02:00 +0000 (22:02 +0300)]
acpi: rephrase comment
"only upto" is not proper English.
Say "up to" and drop "only".
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 16 Jun 2014 17:12:29 +0000 (19:12 +0200)]
qmp: add ACPI_DEVICE_OST event handling
emits event when ACPI OSPM evaluates _OST method
of ACPI device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 16 Jun 2014 17:12:28 +0000 (19:12 +0200)]
qmp: add query-acpi-ospm-status command
... to get ACPI OSPM status reported by ACPI devices
via _OST method.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 16 Jun 2014 17:12:27 +0000 (19:12 +0200)]
acpi: implement ospm_status() method for PIIX4/ICH9_LPC devices
... using TYPE_ACPI_DEVICE_IF interface.
Which provides status reporting of ACPI declared memory devices
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 16 Jun 2014 17:12:26 +0000 (19:12 +0200)]
acpi: introduce TYPE_ACPI_DEVICE_IF interface
... it will be used to abstract generic ACPI bits from
device that implements ACPI interface.
ACPIOSTInfo type is used for passing-through raw _OST
event/status codes reported by guest OS to a management
layer. It lets management tools interpret values
as specified by ACPI spec if it is interested in it.
QEMU doesn't encode these values as enum, since it
doesn't need to handle them and it allows interface
to scale well without any changes in QEMU while guest
OS and management evolves in time.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 16 Jun 2014 17:12:25 +0000 (19:12 +0200)]
qmp: add query-memory-devices command
... allowing to get state of present memory devices.
Currently implemented only for PCDIMMDevice.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Tue, 17 Jun 2014 10:17:05 +0000 (12:17 +0200)]
numa: handle mmaped memory allocation failure correctly
when memory_region_init_ram_from_file() fails
memory_region_size() will still return size that was
provided at region init time.
Instead use errp to properly detect error condition.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 16 Jun 2014 16:33:40 +0000 (18:33 +0200)]
pc: acpi: do not hardcode preprocessor
but use one provided by environment, in addition
force C style preprocessing so that 'gcc -E' or
"clang -E" wouldn't ignore .dsl files.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Mon, 16 Jun 2014 12:20:18 +0000 (15:20 +0300)]
qmp: clean out whitespace
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini [Wed, 11 Jun 2014 12:52:09 +0000 (14:52 +0200)]
qdev: recursively unrealize devices when unrealizing bus
When the patch was posted that became
5c21ce7 (qdev: Realize buses
on device realization, 2014-03-12), it included recursive realization
and unrealization of devices when the bus's "realized" property
was toggled.
However, due to the same old worries about recursive realization
and prerequisites not being realized yet, those hunks were dropped when
committing the patch. Unfortunately, this causes a use-after-free bug
(easily reproduced by a PCI hot-unplug action).
Before the patch, device_unparent behaved as follows:
for each child bus
unparent bus ----------------------------.
| for each child device |
| unparent device ---------------. |
| | unrealize device | |
| | call dc->unparent | |
| '------------------------------- |
'----------------------------------------'
unrealize device
After the patch, it behaves as follows instead:
unrealize device --------------------.
| for each child bus |
| unrealize bus (A) |
'------------------------------------'
for each child bus
unparent bus ----------------------.
| for each child device |
| unrealize device (B) |
| call dc->unparent |
'----------------------------------'
At the step marked (B) the device might use data from the bus that is
not available anymore due to step (A).
To fix this, we need to unrealize devices before step (A). To sidestep
concerns about recursive realization, only do recursive unrealization
and leave the "value && !bus->realized" case as it is.
The resulting flow is:
for each child bus
unrealize bus ---------------------.
| for each child device |
| unrealize device (B) |
| call bc->unrealize (A) |
'----------------------------------'
unrealize device
for each child bus
unparent bus ----------------------.
| for each child device |
| unparent device |
'----------------------------------'
where everything is "powered down" before it is unassembled.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Paolo Bonzini [Wed, 11 Jun 2014 12:52:08 +0000 (14:52 +0200)]
qdev: reorganize error reporting in bus_set_realized
No semantic change.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Michael S. Tsirkin [Mon, 16 Jun 2014 15:07:03 +0000 (18:07 +0300)]
qapi: fix build on glib < 2.28
The following commits:
qapi: make string output visitor parse int list
qapi: make string input visitor parse int list
break with glib < 2.28 since they use the
new g_list_free_full function.
Open-code that to fix build on old systems.
Cc: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hu Tao [Tue, 10 Jun 2014 11:15:28 +0000 (19:15 +0800)]
qapi: make string output visitor parse int list
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: split up patch
Hu Tao [Tue, 10 Jun 2014 11:15:27 +0000 (19:15 +0800)]
qapi: make string input visitor parse int list
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: split up patch
Hu Tao [Tue, 10 Jun 2014 11:15:26 +0000 (19:15 +0800)]
tests: fix memory leak in test of string input visitor
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hu Tao [Wed, 14 May 2014 09:43:35 +0000 (17:43 +0800)]
hmp: add info memdev
This is the hmp counterpart of qmp query-memdev.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: fix build on 32 bit
Hu Tao [Mon, 16 Jun 2014 10:05:41 +0000 (18:05 +0800)]
qmp: add query-memdev
Add qmp command query-memdev to query for information
of memory devices
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hu Tao [Tue, 10 Jun 2014 11:15:25 +0000 (19:15 +0800)]
hostmem: add properties for NUMA memory policy
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[Raise errors on setting properties if !CONFIG_NUMA. Add BUILD_BUG_ON
checks. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini [Tue, 10 Jun 2014 11:15:24 +0000 (19:15 +0800)]
hostmem: add property to map memory with MAP_SHARED
A new "share" property can be used with the "memory-file" backend to
map memory with MAP_SHARED instead of MAP_PRIVATE.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini [Tue, 10 Jun 2014 11:15:23 +0000 (19:15 +0800)]
hostmem: allow preallocation of any memory region
And allow preallocation of file-based memory even without -mem-prealloc.
Some care is necessary because -mem-prealloc does not allow disabling
preallocation for hostmem-file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini [Tue, 10 Jun 2014 11:15:22 +0000 (19:15 +0800)]
hostmem: add merge and dump properties
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Wed, 18 Jun 2014 18:48:19 +0000 (21:48 +0300)]
osdep: add merge and dump flags
will be used by follow up patch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini [Tue, 10 Jun 2014 11:15:21 +0000 (19:15 +0800)]
hostmem: add file-based HostMemoryBackend
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: comment tweak
Hu Tao [Tue, 10 Jun 2014 11:15:19 +0000 (19:15 +0800)]
hostmem: separate allocation from UserCreatable complete method
This allows the superclass to set various policies on the memory
region that the subclass creates. Drops hostmem-ram's complete method
accordingly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hu Tao [Tue, 10 Jun 2014 11:15:18 +0000 (19:15 +0800)]
backend:hostmem: replace hostmemory with host_memory
..to keep names consistant.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini [Tue, 10 Jun 2014 11:15:17 +0000 (19:15 +0800)]
pc: pass MachineState to pc_memory_init
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini [Tue, 10 Jun 2014 11:15:15 +0000 (19:15 +0800)]
vl: redo -object parsing
Follow the lines of the HMP implementation, using OptsVisitor
to parse the options. This gives access to OptsVisitor's
rich parsing of integer lists.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini [Wed, 14 May 2014 09:43:20 +0000 (17:43 +0800)]
memory: add error propagation to file-based RAM allocation
Right now, -mem-path will fall back to RAM-based allocation in some
cases. This should never happen with "-object memory-file", prepare
the code by adding correct error propagation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: drop \n at end of error messages
Paolo Bonzini [Wed, 14 May 2014 09:43:19 +0000 (17:43 +0800)]
memory: move mem_path handling to memory_region_allocate_system_memory
Like the previous patch did in exec.c, split memory_region_init_ram and
memory_region_init_ram_from_file, and push mem_path one step further up.
Other RAM regions than system memory will now be backed by regular RAM.
Also, boards that do not use memory_region_allocate_system_memory will
not support -mem-path anymore. This can be changed before the patches
are merged by migrating boards to use the function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini [Wed, 14 May 2014 09:43:17 +0000 (17:43 +0800)]
numa: add -numa node,memdev= option
This option provides the infrastructure for binding guest NUMA nodes
to host NUMA nodes. For example:
-object memory-ram,size=1024M,policy=bind,host-nodes=0,id=ram-node0 \
-numa node,nodeid=0,cpus=0,memdev=ram-node0 \
-object memory-ram,size=1024M,policy=interleave,host-nodes=1-3,id=ram-node1 \
-numa node,nodeid=1,cpus=1,memdev=ram-node1
The option replaces "-numa node,mem=".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
MST: conflict resolution
Hu Tao [Wed, 14 May 2014 09:43:33 +0000 (17:43 +0800)]
qom: introduce object_property_get_enum and object_property_get_uint16List
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hu Tao [Wed, 14 May 2014 09:43:30 +0000 (17:43 +0800)]
Introduce signed range.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: split up patch
Wanlong Gao [Wed, 14 May 2014 09:43:28 +0000 (17:43 +0800)]
configure: add Linux libnuma detection
Add detection of libnuma (mostly contained in the numactl package)
to the configure script. Can be enabled or disabled on the command
line, default is use if available.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini [Wed, 14 May 2014 09:43:22 +0000 (17:43 +0800)]
memory: move RAM_PREALLOC_MASK to exec.c, rename
Prepare for adding more flags. The "_MASK" suffix is unique, kill it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini [Wed, 14 May 2014 09:43:21 +0000 (17:43 +0800)]
memory: move preallocation code out of exec.c
So that backends can use it.
Since we need the page size for efficiency, move code to compute it
out of translate-all.c and into util/oslib-win32.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini [Wed, 14 May 2014 09:43:18 +0000 (17:43 +0800)]
memory: reorganize file-based allocation
Split the internal interface in exec.c to a separate function, and
push the check on mem_path up to memory_region_init_ram.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini [Wed, 14 May 2014 09:43:15 +0000 (17:43 +0800)]
numa: introduce memory_region_allocate_system_memory
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: resolve conflicts
Paolo Bonzini [Wed, 14 May 2014 09:43:13 +0000 (17:43 +0800)]
qmp: improve error reporting for -object and object-add
Use QERR_INVALID_PARAMETER_VALUE for consistency.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Luiz Capitulino [Wed, 14 May 2014 09:43:10 +0000 (17:43 +0800)]
man: improve -numa doc
The -numa option documentation in qemu's manpage lacks the command-line
options and some information regarding how it relates to options -m and
-smp. This commit fills in the missing text.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wanlong Gao [Wed, 14 May 2014 09:43:09 +0000 (17:43 +0800)]
NUMA: expand MAX_NODES from 64 to 128
libnuma choosed 128 for MAX_NODES, so we follow libnuma here.
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wanlong Gao [Wed, 14 May 2014 09:43:08 +0000 (17:43 +0800)]
NUMA: convert -numa option to use OptsVisitor
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wanlong Gao [Wed, 14 May 2014 09:43:07 +0000 (17:43 +0800)]
NUMA: Add numa_info structure to contain numa nodes info
Add the numa_info structure to contain the numa nodes memory,
VCPUs information and the future added numa nodes host memory
policies.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
[Fix hw/ppc/spapr.c - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wanlong Gao [Wed, 14 May 2014 09:43:06 +0000 (17:43 +0800)]
NUMA: check if the total numa memory size is equal to ram_size
If the total number of the assigned numa nodes memory is not
equal to the assigned ram size, it will write the wrong data
to ACPI table, then the guest will ignore the wrong ACPI table
and recognize all memory to one node. It's buggy, we should
check it to ensure that we write the right data to ACPI table.
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
MST: error message reworded
Wanlong Gao [Wed, 14 May 2014 09:43:05 +0000 (17:43 +0800)]
NUMA: move numa related code to new file numa.c
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
MST: comment tweaks
Michael S. Tsirkin [Wed, 18 Jun 2014 09:23:36 +0000 (12:23 +0300)]
tests: disable vhost test temporarily
This test needs a bit more work: issues have been
found on legacy systems, disable it for now to
avoid false positives for people.
Will re-enable after issues are addressed.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolaev [Tue, 10 Jun 2014 10:03:23 +0000 (13:03 +0300)]
Add qtest for vhost-user
This test creates a 'server' chardev to listen for vhost-user messages.
Once VHOST_USER_SET_MEM_TABLE is received it mmaps each received region,
and read 1k bytes from it. The read data is compared to data from readl.
The test requires hugetlbfs to be already mounted and writable. The mount
point defaults to '/hugetlbfs' and can be specified via the environment
variable QTEST_HUGETLBFS_PATH.
The rom pc-bios/pxe-virtio.rom is used to instantiate a virtio pcicontroller.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: fix up coding style
MST: disable vhost test temporarily
This test needs a bit more work: issues have been
found on legacy systems, disable it for now to
avoid false positives for people.
Will re-enable after issues are addressed.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolaev [Tue, 27 May 2014 12:07:10 +0000 (15:07 +0300)]
libqemustub: add stubs to be able to use qemu-char.c
chardev depends on lots of external symbols that are not necessarily
needed to be able to use, for example, 'socket chardev'. So add stubs
for these functions:
- bdrv_commit_all
- qemu_chr_open_msmouse
- is_daemonized
- qemu_add_machine_init_done_notifier
- monitor_init
- qemu_notify_event
- vc_init
and this array:
- serial_hds
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolaev [Tue, 10 Jun 2014 10:02:57 +0000 (13:02 +0300)]
Add vhost-user protocol documentation
This document describes the basic message format used by vhost-user
for communication over a unix domain socket. The protocol is based
on the existing ioctl interface used for the kernel version of vhost.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolaev [Tue, 10 Jun 2014 10:02:16 +0000 (13:02 +0300)]
Add the vhost-user netdev backend to the command line
The supplied chardev id will be inspected for supported options. Only
a socket backend, with a set path (i.e. a Unix socket) and optionally
the server parameter set, will be allowed. Other options (nowait, telnet)
will make the chardev unusable and the netdev will not be initialised.
Additional checks for validity:
- requires `-numa node,memdev=..`
- requires `-device virtio-net-*`
The `vhostforce` option is used to force vhost-net when we deal with
non-MSIX guests.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Nikolay Nikolaev [Tue, 27 May 2014 12:06:29 +0000 (15:06 +0300)]
Add new vhost-user netdev backend
Add a new QEMU netdev backend that is intended to invoke vhost_net with the
vhost-user backend. It uses an Unix socket chardev to establish a
communication with the 'slave' (client and server mode supported).
At runtime the netdev will handle OPEN/CLOSE events from the chardev. Upon
disconnection it will set link_down accordingly and notify virtio-net; the
virtio-net interface will go down.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolaev [Tue, 27 May 2014 12:06:16 +0000 (15:06 +0300)]
vhost-net: vhost-user feature bits support
Handle the feature bits negotiation when using vhost-user. Allow
the underlying implementation to have a finer control over all the
bits except the VIRTIO_NET_F_MAC.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolaev [Tue, 27 May 2014 12:06:02 +0000 (15:06 +0300)]
Add vhost-user as a vhost backend.
The initialization takes a chardev backed by a unix domain socket.
It should implement qemu_fe_set_msgfds in order to be able to pass
file descriptors to the remote process.
Each ioctl request of vhost-kernel has a vhost-user message equivalent,
which is sent over the control socket.
The general approach is to copy the data from the supplied argument
pointer to a designated field in the message. If a file descriptor is
to be passed it will be placed in the fds array for inclusion in
the sendmsg control header.
VHOST_SET_MEM_TABLE ignores the supplied vhost_memory structure and scans
the global ram_list for ram blocks with a valid fd field set. This would
be set when the '-object memory-file' option with share=on property is used.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolaev [Tue, 27 May 2014 12:05:49 +0000 (15:05 +0300)]
Add vhost-backend and VhostBackendType
Use vhost_set_backend_type to initialise a proper vhost_ops structure.
In vhost_net_init and vhost_net_start_one call conditionally TAP related
initialisation depending on the vhost backend type.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolaev [Tue, 27 May 2014 12:05:35 +0000 (15:05 +0300)]
Add vhost_ops to vhost_dev struct and replace all relevant ioctls
Decouple vhost from the Linux kernel by introducing vhost_ops. The
intention is to provide different backends - a 'kernel' backend based on
the ioctl interface, and an 'user' backend based on a UNIX domain socket
and shared memory interface.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolaev [Tue, 27 May 2014 12:05:22 +0000 (15:05 +0300)]
vhost_net_init will use VhostNetOptions to get all its arguments
vhost_dev_init will replace devfd and devpath with a single opaque argument.
This is initialised with a file descriptor. When TAP is used (through
vhost_net), open /dev/vhost-net and pass the fd as an opaque parameter in
VhostNetOptions. The same applies to vhost-scsi - open /dev/vhost-scsi and
pass the fd.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolaev [Tue, 27 May 2014 12:05:08 +0000 (15:05 +0300)]
Refactor virtio-net to use generic get_vhost_net
This decouples virtio-net from the TAP netdev backend and allows support
for other backends to be implemented.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolaev [Tue, 27 May 2014 12:04:55 +0000 (15:04 +0300)]
vhost_net should call the poll callback only when it is set
The poll callback needs to be called when bringing up or down
the vhost_net instance. As it is not mandatory for an NetClient
to implement it, invoke it only when it is set.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolaev [Tue, 27 May 2014 12:04:42 +0000 (15:04 +0300)]
vhost: add vhost_get_features and vhost_ack_features
Generalize the features get/ack to be used for both vhost-net and vhost-scsi.
In vhost-net add vhost_net_get_feature_bits to select the feature bit set
depending on the NetClient kind.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolaev [Tue, 27 May 2014 12:04:28 +0000 (15:04 +0300)]
Add G_IO_HUP handler for socket chardev
This is used to detect that the remote end has disconnected. Just call
tcp_char_disconnect on receiving this event.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolaev [Tue, 27 May 2014 12:04:15 +0000 (15:04 +0300)]
Add chardev API qemu_chr_fe_get_msgfds
This extends the existing qemu_chr_fe_get_msgfd by allowing to read a set
of fds. The function for receiving the fds - unix_process_msgfd is extended
to allocate the needed array size.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolaev [Tue, 27 May 2014 12:04:02 +0000 (15:04 +0300)]
Add chardev API qemu_chr_fe_set_msgfds
This will set an array of file descriptors to the internal structures.
The next time a message is send the array will be send as ancillary
data. This feature works on the UNIX domain socket backend only.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolaev [Tue, 27 May 2014 12:03:48 +0000 (15:03 +0300)]
Add chardev API qemu_chr_fe_read_all
This function will attempt to read data from the chardev trying
to fill the buffer up to the given length.
Add tcp_chr_disconnect to reuse disconnection code where needed.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolaev [Tue, 27 May 2014 12:03:35 +0000 (15:03 +0300)]
Add kvm_eventfds_enabled function
Add a function to check if the eventfd capability is present in KVM in
the host kernel.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Jason Wang [Tue, 20 May 2014 06:01:44 +0000 (14:01 +0800)]
virtio-net: announce self by guest
It's hard to track all mac addresses and their configurations (e.g
vlan or ipv6) in qemu. Without this information, it's impossible to
build proper garp packet after migration. The only possible solution
to this is let guest (who knows all configurations) to do this.
So, this patch introduces a new readonly config status bit of virtio-net,
VIRTIO_NET_S_ANNOUNCE which is used to notify guest to announce
presence of its link through config update interrupt.When guest has
done the announcement, it should ack the notification through
VIRTIO_NET_CTRL_ANNOUNCE_ACK cmd. This feature is negotiated by a new
feature bit VIRTIO_NET_F_ANNOUNCE (which has already been supported by
Linux guest).
During load, a counter of announcing rounds is set so that after the vm is
running it can trigger rounds of config interrupts to notify the guest to build
and send the correct garps.
Cc: Liuyongan <liuyongan@huawei.com>
Cc: Amos Kong <akong@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Tue, 20 May 2014 06:01:43 +0000 (14:01 +0800)]
migration: introduce self_announce_delay()
This patch introduces self_announce_delay() to calculate the delay for
the next announce round. This could be used by other device e.g
virtio-net who wants to do announcing by itself.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Tue, 20 May 2014 06:01:42 +0000 (14:01 +0800)]
migration: export SELF_ANNOUNCE_ROUNDS
Export it for other users.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 9 Jun 2014 17:28:00 +0000 (19:28 +0200)]
pc: q35: acpi: report error to user on unsupported unplug request
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Sun, 8 Jun 2014 15:45:25 +0000 (18:45 +0300)]
ich: get rid of spaces in type name
Names with spaces in them are nasty, let's not go there.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Markus Armbruster [Fri, 6 Jun 2014 16:43:30 +0000 (18:43 +0200)]
virtio: Drop superfluous conditionals around g_strdup()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Markus Armbruster [Fri, 6 Jun 2014 16:43:29 +0000 (18:43 +0200)]
virtio: Drop superfluous conditionals around g_free()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Michael S. Tsirkin [Sun, 8 Jun 2014 12:59:58 +0000 (15:59 +0300)]
acpi-test: update expected tables
Update ACPI tables test to match new ACPI tables
after adding the memory hotplug feature.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Sun, 8 Jun 2014 12:58:59 +0000 (15:58 +0300)]
acpi: update generated files
pdate precompiled ACPI hex files for iasl-less hosts
after adding the memory hotplug feature
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:29 +0000 (15:25 +0200)]
pc: ACPI BIOS: make GPE.3 handle memory hotplug event on PIIX and Q35 machines
also make handler edge based to avoid losing events, the same as
it has been done for PCI and CPU hotplug handlers.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:28 +0000 (15:25 +0200)]
pc: ACPI BIOS: reserve SRAT entry for hotplug mem hole
Needed for Windows to use hotplugged memory device, otherwise
it complains that server is not configured for memory hotplug.
Tests shows that aftewards it uses dynamically provided
proximity value from _PXM() method if available.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:27 +0000 (15:25 +0200)]
pc: add "hotplug-memory-region-size" property to PC_MACHINE
... it will be used by acpi-build code and by unit tests
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:26 +0000 (15:25 +0200)]
pc: ACPI BIOS: implement memory hotplug interface
- provides static SSDT object for memory hotplug that can handle
upto 256 hotplugable memory slots
- SSDT template for memory devices and runtime generator
of them in SSDT table.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:25 +0000 (15:25 +0200)]
pc: propagate memory hotplug event to ACPI device
Notify PIIX4_PM/ICH9LPC device about hotplug event,
so that it would send SCI to guest notifying about
newly added memory.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:24 +0000 (15:25 +0200)]
pc: add acpi-device link to PCMachineState
the link will used later to access device implementing
ACPI functions instead of adhoc lookup in QOM tree.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:23 +0000 (15:25 +0200)]
pc: migrate piix4 & ich9 MemHotplugState
Adds an optional subsection that allows to migrate current
state of acpi_memory_hotplug of ACPI PM device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:22 +0000 (15:25 +0200)]
acpi:ich9: add memory hotplug handling
Add memory hotplug initialization/handling to ICH9 LPC device
and enable it by default for post 2.0 machine types
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:21 +0000 (15:25 +0200)]
pc: ich9 lpc: make it work with global/compat properties
Propeties of object should be available after its instances_init()
callback is finished and not added in PCIDeviceClass.init which is
roughly corresponds to realize() method.
Moving properties adding into instances_init will fix missing
property error when global/compat property mechanism is used.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:20 +0000 (15:25 +0200)]
acpi:piix4: add memory hotplug handling
Add memory hotplug initialization/handling to PIIX4_PM device
and enable it by default for post 2.0 machine types
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: resolve conflict in pc.h
Igor Mammedov [Mon, 2 Jun 2014 13:25:19 +0000 (15:25 +0200)]
acpi:piix4: allow plug/unlug callbacks handle not only PCI devices
... and report error if plugged in device is not supported.
Later these callbacks will be used by memory hotplug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:18 +0000 (15:25 +0200)]
trace: pc: add PC_DIMM slot & address allocation
Add mhp_pc_dimm_assigned_slot & mhp_pc_dimm_assigned_address
events to trace which address and slot where assigned to
plugged in PC_DIMM device on target-i386 machine.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:17 +0000 (15:25 +0200)]
trace: add acpi memory hotplug IO region events
Add events for tracing accesses to memory hotplug IO ports.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:16 +0000 (15:25 +0200)]
acpi: memory hotplug ACPI hardware implementation
- implements QEMU hardware part of memory hotplug protocol
described at "docs/specs/acpi_mem_hotplug.txt"
- handles only memory add notification event for now
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:15 +0000 (15:25 +0200)]
acpi: rename cpu_hotplug_defs.h to pc-hotplug.h
to make it more generic, so it could be used for memory hotplug
as well.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:14 +0000 (15:25 +0200)]
pc-dimm: add busy slot check and slot auto-allocation
- if slot property is not specified on -device/device_add command,
treat default value as request for assigning PCDIMMDevice to
the first free slot.
- if slot is provided with -device/device_add command, attempt to
use it or fail command if it's already occupied.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:13 +0000 (15:25 +0200)]
pc-dimm: add busy address check and address auto-allocation
- if 'addr' property is not specified on -device/device_add command,
treat the default value as request for assigning PCDIMMDevice to
the first free memory region.
- if 'addr' is provided with -device/device_add command, attempt to
use it or fail command if it's already occupied or falls inside
of an existing PCDIMMDevice memory region.
Note:
GCompareFunc(a, b) used by g_slist_insert_sorted() returns 'gint',
however it might be too small to fit difference between
2 addresses. So use 128bit to calculate the difference and normalize
result to -1/0/1 return values.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Andrey Korolyov <andrey@xdel.ru>
MST: commit log tweaks
Igor Mammedov [Mon, 2 Jun 2014 13:25:12 +0000 (15:25 +0200)]
pc: add memory hotplug handler to PC_MACHINE
that will perform mapping of PC_DIMM device into guest's RAM address space
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:11 +0000 (15:25 +0200)]
pc: exit QEMU if compat machine doesn't support memory hotlpug
... if user attempts to start it with memory hotplug enabled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:10 +0000 (15:25 +0200)]
pc: add 'etc/reserved-memory-end' fw_cfg interface for SeaBIOS
'etc/reserved-memory-end' will allow QEMU to tell BIOS where PCI
BARs mapping could safely start in high memory.
Allowing BIOS to start mapping 64-bit PCI BARs at address where it
wouldn't conflict with other mappings QEMU might place before it.
That permits QEMU to reserve extra address space before
64-bit PCI hole for memory hotplug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:09 +0000 (15:25 +0200)]
pc: exit QEMU if number of slots more than supported 256
... which is imposed by current naming scheme of ACPI memory devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:08 +0000 (15:25 +0200)]
pc: initialize memory hotplug address space
initialize and map hotplug memory address space container
into guest's RAM address space.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:07 +0000 (15:25 +0200)]
pc-dimm: do not allow setting an in-use memdev
using the same memdev backend more than once will cause
assertion at MemoryRegion mapping time because it's already
mapped. Prevent it by checking that the associated MemoryRegion
is not mapped.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: tweak commit log
Igor Mammedov [Mon, 2 Jun 2014 13:25:06 +0000 (15:25 +0200)]
memory: add memory_region_is_mapped() API
which allows to check if MemoryRegion is already mapped.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Vasilis Liaskovitis [Mon, 2 Jun 2014 13:25:05 +0000 (15:25 +0200)]
pc: implement pc-dimm device abstraction
Each hotplug-able memory slot is a PCDIMMDevice.
A hot-add operation for a memory device:
- creates a new PCDIMMDevice and makes hotplug controller to map it into
guest address space
Hotplug operations are done through normal device_add commands.
For migration case, all hotplugged memory devices on source should be
specified on target's command line using '-device' option with
properties set to the same values as on source.
To simplify review, patch introduces only PCDIMMDevice QOM skeleton that
will be extended by following patches to implement actual memory hotplug
and related functions.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:04 +0000 (15:25 +0200)]
qdev: expose DeviceState.hotplugged field as a property
so that management could detect via QOM interface if device was
hotplugged
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Mon, 2 Jun 2014 13:25:03 +0000 (15:25 +0200)]
qdev: hotplug for bus-less devices
Add get_hotplug_handler() method to machine, and
make bus-less device use it during hotplug
as a means to discover a hotplug handler controller.
The returned controller is used to perform hotplug
actions.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>