OSDN Git Service
Max Gurtovoy [Tue, 19 May 2020 14:05:48 +0000 (17:05 +0300)]
block: always define struct blk_integrity in genhd.h
This will reduce the amount of ifdefs inside the source code for various
drivers and also will reduce the amount of stub functions that were
created for the !CONFIG_BLK_DEV_INTEGRITY case.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Chaitanya Kulkarni [Tue, 19 May 2020 08:06:29 +0000 (01:06 -0700)]
nvmet: revalidate-ns & generate AEN from configfs
Add a new attribute "revalidate_size" for the namespace which allows
user to revalidate and generate the AEN if needed. This attribute is
needed so that we can install userspace rules with systemd service based
on inotify/fsnotify/uevent. The registered callback for such a service
will end up writing to this attribute to generate AEN if needed.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimbeg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Chaitanya Kulkarni [Tue, 19 May 2020 08:06:28 +0000 (01:06 -0700)]
nvmet: generate AEN for ns revalidate size change
The newly added function nvmet_ns_revalidate() does update the ns size
in the identify namespace in-core target data structure when host issues
id-ns command. This can lead to host having inconsistencies between size
of the namespace present in the id-ns command result and size of the
corresponding block device until host scans the namespaces explicitly.
To avoid this scenario generate AEN if old size is not same as the new
one in nvmet_ns_revalidate().
This will allow automatic AEN generation when host calls id-ns command
and also allows target to install userspace rules so that it can trigger
nvmet_ns_revalidate() (using configfs interface with the help of next
patch) resulting in appropriate AEN generation when underlying namespace
size change is detected.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimbeg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Chaitanya Kulkarni [Tue, 19 May 2020 08:06:27 +0000 (01:06 -0700)]
nvmet: add helper to revalidate bdev and file ns
This patch adds a wrapper helper to indicate size change in the bdev &
file-backed namespace when revalidating ns. This helper is needed in
order to minimize code repetition in the next patch for configfs.c and
existing admin-cmd.c.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimbeg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Chaitanya Kulkarni [Tue, 19 May 2020 08:06:30 +0000 (01:06 -0700)]
nvmet: add async event tracing support
This adds a new tracepoint for the target to trace async event. This is
helpful in debugging and comparing host and target side async events
especially when host is connected to different targets on different
machines and now that we rely on userspace components to generate AEN.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Dan Carpenter [Fri, 15 May 2020 12:06:59 +0000 (15:06 +0300)]
nvme: delete an unnecessary declaration
The nvme_put_ctrl() is implemented earlier as an inline function so
this declaration isn't required.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Gustavo A. R. Silva [Thu, 7 May 2020 19:04:52 +0000 (14:04 -0500)]
nvme: replace zero-length array with flexible-array
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit
76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Damien Le Moal [Thu, 14 May 2020 05:56:26 +0000 (14:56 +0900)]
nvme: fix io_opt limit setting
Currently, a namespace io_opt queue limit is set by default to the
physical sector size of the namespace and to the the write optimal
size (NOWS) when the namespace reports optimal IO sizes. This causes
problems with block limits stacking in blk_stack_limits() when a
namespace block device is combined with an HDD which generally do not
report any optimal transfer size (io_opt limit is 0). The code:
/* Optimal I/O a multiple of the physical block size? */
if (t->io_opt & (t->physical_block_size - 1)) {
t->io_opt = 0;
t->misaligned = 1;
ret = -1;
}
in blk_stack_limits() results in an error return for this function when
the combined devices have different but compatible physical sector
sizes (e.g. 512B sector SSD with 4KB sector disks).
Fix this by not setting the optimal IO size queue limit if the namespace
does not report an optimal write size value.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Wu Bo [Wed, 13 May 2020 08:18:13 +0000 (16:18 +0800)]
nvme: disable streams when get stream params failed
Disable streams again if getting the stream params fails.
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Martin George [Tue, 12 May 2020 16:47:04 +0000 (22:17 +0530)]
nvme-fc: print proper nvme-fc devloss_tmo value
The nvme-fc devloss_tmo is computed as the min of either the
ctrl_loss_tmo (max_retries * reconnect_delay) or the remote port's
devloss_tmo. But what gets printed as the nvme-fc devloss_tmo in
nvme_fc_reconnect_or_delete() is always the remote port's devloss_tmo
value. So correct this by printing the min value instead.
Signed-off-by: Martin George <marting@netapp.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Weiping Zhang [Sat, 9 May 2020 06:22:08 +0000 (14:22 +0800)]
nvme-pci: make sure write/poll_queues less or equal then cpu count
Check module parameter write/poll_queues before using it to catch
too large values.
Reproducer:
modprobe -r nvme
modprobe nvme write_queues=`nproc`
echo $((`nproc`+1)) > /sys/module/nvme/parameters/write_queues
echo 1 > /sys/block/nvme0n1/device/reset_controller
[ 657.069000] ------------[ cut here ]------------
[ 657.069022] WARNING: CPU: 10 PID: 1163 at kernel/irq/affinity.c:390 irq_create_affinity_masks+0x47c/0x4a0
[ 657.069056] dm_region_hash dm_log dm_mod
[ 657.069059] CPU: 10 PID: 1163 Comm: kworker/u193:9 Kdump: loaded Tainted: G W 5.6.0+ #8
[ 657.069060] Hardware name: Inspur SA5212M5/YZMB-00882-104, BIOS 4.0.9 08/27/2019
[ 657.069064] Workqueue: nvme-reset-wq nvme_reset_work [nvme]
[ 657.069066] RIP: 0010:irq_create_affinity_masks+0x47c/0x4a0
[ 657.069067] Code: fe ff ff 48 c7 c0 b0 89 14 95 48 89 46 20 e9 e9 fb ff ff 31 c0 e9 90 fc ff ff 0f 0b 48 c7 44 24 08 00 00 00 00 e9 e9 fc ff ff <0f> 0b e9 87 fe ff ff 48 8b 7c 24 28 e8 33 a0 80 00 e9 b6 fc ff ff
[ 657.069068] RSP: 0018:
ffffb505ce1ffc78 EFLAGS:
00010202
[ 657.069069] RAX:
0000000000000060 RBX:
ffff9b97921fe5c0 RCX:
0000000000000000
[ 657.069069] RDX:
ffff9b67bad80000 RSI:
00000000ffffffa0 RDI:
0000000000000000
[ 657.069070] RBP:
0000000000000000 R08:
0000000000000000 R09:
ffff9b97921fe718
[ 657.069070] R10:
ffff9b97921fe710 R11:
0000000000000001 R12:
0000000000000064
[ 657.069070] R13:
0000000000000060 R14:
0000000000000000 R15:
0000000000000001
[ 657.069071] FS:
0000000000000000(0000) GS:
ffff9b67c0880000(0000) knlGS:
0000000000000000
[ 657.069072] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 657.069072] CR2:
0000559eac6fc238 CR3:
000000057860a002 CR4:
00000000007606e0
[ 657.069073] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 657.069073] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 657.069073] PKRU:
55555554
[ 657.069074] Call Trace:
[ 657.069080] __pci_enable_msix_range+0x233/0x5a0
[ 657.069085] ? kernfs_put+0xec/0x190
[ 657.069086] pci_alloc_irq_vectors_affinity+0xbb/0x130
[ 657.069089] nvme_reset_work+0x6e6/0xeab [nvme]
[ 657.069093] ? __switch_to_asm+0x34/0x70
[ 657.069094] ? __switch_to_asm+0x40/0x70
[ 657.069095] ? nvme_irq_check+0x30/0x30 [nvme]
[ 657.069098] process_one_work+0x1a7/0x370
[ 657.069101] worker_thread+0x1c9/0x380
[ 657.069102] ? max_active_store+0x80/0x80
[ 657.069103] kthread+0x112/0x130
[ 657.069104] ? __kthread_parkme+0x70/0x70
[ 657.069105] ret_from_fork+0x35/0x40
[ 657.069106] ---[ end trace
f4f06b7d24513d06 ]---
[ 657.077110] nvme nvme0: 95/1/0 default/read/poll queues
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Mon, 18 May 2020 17:47:48 +0000 (10:47 -0700)]
nvmet-tcp: move send/recv error handling in the send/recv methods instead of call-sites
Have routines handle errors and just bail out of the poll loop.
This simplifies the code and will help as we may enhance the poll
loop logic and these are somewhat in the way.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Wed, 13 May 2020 01:01:43 +0000 (18:01 -0700)]
nvmet-tcp: set MSG_EOR if we send last payload in the batch
when trying to send the pdu data digest, we should set this
flag.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Tue, 5 May 2020 05:20:02 +0000 (22:20 -0700)]
nvmet-tcp: set MSG_SENDPAGE_NOTLAST with MSG_MORE when we have more to send
We can signal the stack that this is not the last page coming and the
stack can build a larger tso segment, so go ahead and use it.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sagi Grimberg [Tue, 5 May 2020 05:20:01 +0000 (22:20 -0700)]
nvme-tcp: set MSG_SENDPAGE_NOTLAST with MSG_MORE when we have more to send
We can signal the stack that this is not the last page coming and the
stack can build a larger tso segment, so go ahead and use it.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Christoph Hellwig [Tue, 12 May 2020 16:19:13 +0000 (18:19 +0200)]
nvmet: mark nvmet_ana_state static
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Chen Zhou [Fri, 8 May 2020 11:59:06 +0000 (19:59 +0800)]
nvmet: replace kstrndup() with kmemdup_nul()
It is more efficient to use kmemdup_nul() if the size is known exactly.
The doc in kernel:
"Note: Use kmemdup_nul() instead if the size is known exactly."
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Jiri Kosina [Tue, 26 May 2020 09:49:18 +0000 (11:49 +0200)]
block/floppy: fix contended case in floppy_queue_rq()
Since the switch of floppy driver to blk-mq, the contended (fdc_busy) case
in floppy_queue_rq() is not handled correctly.
In case we reach floppy_queue_rq() with fdc_busy set (i.e. with the floppy
locked due to another request still being in-flight), we put the request
on the list of requests and return BLK_STS_OK to the block core, without
actually scheduling delayed work / doing further processing of the
request. This means that processing of this request is postponed until
another request comes and passess uncontended.
Which in some cases might actually never happen and we keep waiting
indefinitely. The simple testcase is
for i in `seq 1 2000`; do echo -en $i '\r'; blkid --info /dev/fd0 2> /dev/null; done
run in quemu. That reliably causes blkid eventually indefinitely hanging
in __floppy_read_block_0() waiting for completion, as the BIO callback
never happens, and no further IO is ever submitted on the (non-existent)
floppy device. This was observed reliably on qemu-emulated device.
Fix that by not queuing the request in the contended case, and return
BLK_STS_RESOURCE instead, so that blk core handles the request
rescheduling and let it pass properly non-contended later.
Fixes:
a9f38e1dec107a ("floppy: convert to blk-mq")
Cc: stable@vger.kernel.org
Tested-by: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Colin Ian King [Sun, 24 May 2020 16:10:43 +0000 (17:10 +0100)]
loop: remove redundant assignment to variable error
The variable error is being assigned a value that is never
read so the assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 19 May 2020 14:33:21 +0000 (16:33 +0200)]
block: remove ioctl_by_bdev
No callers left.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stefan Haberland [Tue, 19 May 2020 14:22:59 +0000 (16:22 +0200)]
s390/dasd: remove ioctl_by_bdev calls
The IBM partition parser requires device type specific information only
available to the DASD driver to correctly register partitions. The
current approach of using ioctl_by_bdev with a fake user space pointer
is discouraged.
Fix this by replacing IOCTL calls with direct in-kernel function calls.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 19 May 2020 14:22:58 +0000 (16:22 +0200)]
dasd: refactor dasd_ioctl_information
Prepare for in-kernel callers of this functionality.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[sth@de.ibm.com: remove leftover kfree]
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Martijn Coenen [Wed, 13 May 2020 13:38:45 +0000 (15:38 +0200)]
loop: Add LOOP_CONFIGURE ioctl
This allows userspace to completely setup a loop device with a single
ioctl, removing the in-between state where the device can be partially
configured - eg the loop device has a backing file associated with it,
but is reading from the wrong offset.
Besides removing the intermediate state, another big benefit of this
ioctl is that LOOP_SET_STATUS can be slow; the main reason for this
slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to
freeze the associated queue; this requires waiting for RCU
synchronization, which I've measured can take about 15-20ms on this
device on average.
In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can
also be used to:
- Set the correct block size immediately by setting
loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE)
- Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO
in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO)
- Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY
in loop_config.info.lo_flags
Here's setting up ~70 regular loop devices with an offset on an x86
Android device, using LOOP_SET_FD and LOOP_SET_STATUS:
vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
0m03.40s real 0m00.02s user 0m00.03s system
Here's configuring ~70 devices in the same way, but using a modified
losetup that uses the new LOOP_CONFIGURE ioctl:
vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
0m01.94s real 0m00.01s user 0m00.01s system
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Martijn Coenen [Wed, 13 May 2020 13:38:44 +0000 (15:38 +0200)]
loop: Clean up LOOP_SET_STATUS lo_flags handling
LOOP_SET_STATUS(64) will actually allow some lo_flags to be modified; in
particular, LO_FLAGS_AUTOCLEAR can be set and cleared, whereas
LO_FLAGS_PARTSCAN can be set to request a partition scan. Make this
explicit by updating the UAPI to include the flags that can be
set/cleared using this ioctl.
The implementation can then blindly take over the passed in flags,
and use the previous flags for those flags that can't be set / cleared
using LOOP_SET_STATUS.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Martijn Coenen [Wed, 13 May 2020 13:38:43 +0000 (15:38 +0200)]
loop: Rework lo_ioctl() __user argument casting
In preparation for a new ioctl that needs to copy_from_user(); makes the
code easier to read as well.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Martijn Coenen [Wed, 13 May 2020 13:38:42 +0000 (15:38 +0200)]
loop: Move loop_set_status_from_info() and friends up
So we can use it without forward declaration. This is a separate commit
to make it easier to verify that this is just a move, without functional
modifications.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Martijn Coenen [Wed, 13 May 2020 13:38:41 +0000 (15:38 +0200)]
loop: Factor out configuring loop from status
Factor out this code into a separate function, so it can be reused by
other code more easily.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Martijn Coenen [Wed, 13 May 2020 13:38:40 +0000 (15:38 +0200)]
loop: Remove figure_loop_size()
This function was now only used by loop_set_capacity(). Just open code
the remaining code in the caller instead.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Martijn Coenen [Wed, 13 May 2020 13:38:39 +0000 (15:38 +0200)]
loop: Refactor loop_set_status() size calculation
figure_loop_size() calculates the loop size based on the passed in
parameters, but at the same time it updates the offset and sizelimit
parameters in the loop device configuration. That is a somewhat
unexpected side effect of a function with this name, and it is only only
needed by one of the two callers of this function - loop_set_status().
Move the lo_offset and lo_sizelimit assignment back into loop_set_status(),
and use the newly factored out functions to validate and apply the newly
calculated size. This allows us to get rid of figure_loop_size() in a
follow-up commit.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Martijn Coenen [Wed, 13 May 2020 13:38:38 +0000 (15:38 +0200)]
loop: Switch to set_capacity_revalidate_and_notify()
This was recently added to block/genhd.c, and takes care of both
updating the capacity and notifying userspace of the new size.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Martijn Coenen [Wed, 13 May 2020 13:38:37 +0000 (15:38 +0200)]
loop: Factor out setting loop device size
This code is used repeatedly.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Martijn Coenen [Wed, 13 May 2020 13:38:36 +0000 (15:38 +0200)]
loop: Remove sector_t truncation checks
sector_t is now always u64, so we don't need to check for truncation.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Martijn Coenen [Wed, 13 May 2020 13:38:35 +0000 (15:38 +0200)]
loop: Call loop_config_discard() only after new config is applied
loop_set_status() calls loop_config_discard() to configure discard for
the loop device; however, the discard configuration depends on whether
the loop device uses encryption, and when we call it the encryption
configuration has not been updated yet. Move the call down so we apply
the correct discard configuration based on the new configuration.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Xu Wang [Thu, 7 May 2020 07:12:11 +0000 (15:12 +0800)]
block/swim3: use set_current_state macro
Use set_current_state macro instead of current->state = TASK_RUNNING.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Wed, 13 May 2020 21:17:01 +0000 (15:17 -0600)]
Merge branch 'md-next' of git://git./linux/kernel/git/song/md into for-5.8/drivers
Pull MD changes from Song.
* 'md-next' of git://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid1: Replace zero-length array with flexible-array
md: add a newline when printing parameter 'start_ro' by sysfs
md: stop using ->queuedata
md/raid1: release pending accounting for an I/O only after write-behind is also finished
md: remove redundant memalloc scope API usage
raid5: update code comment of scribble_alloc()
raid5: remove gfp flags from scribble_alloc()
md: use memalloc scope APIs in mddev_suspend()/mddev_resume()
md: remove the extra line for ->hot_add_disk
md: flush md_rdev_misc_wq for HOT_ADD_DISK case
md: don't flush workqueue unconditionally in md_open
md: add new workqueue for delete rdev
md: add checkings before flush md_misc_wq
Gustavo A. R. Silva [Thu, 7 May 2020 19:22:10 +0000 (14:22 -0500)]
md/raid1: Replace zero-length array with flexible-array
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit
76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Xiongfeng Wang [Mon, 11 May 2020 08:23:25 +0000 (16:23 +0800)]
md: add a newline when printing parameter 'start_ro' by sysfs
Add a missing newline when printing module parameter 'start_ro' by
sysfs.
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Christoph Hellwig [Fri, 8 May 2020 16:15:14 +0000 (18:15 +0200)]
md: stop using ->queuedata
Pointer to mddev is already available in private_data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
David Jeffery [Mon, 27 Jan 2020 15:26:19 +0000 (10:26 -0500)]
md/raid1: release pending accounting for an I/O only after write-behind is also finished
When using RAID1 and write-behind, md can deadlock when errors occur. With
write-behind, r1bio structs can be accounted by raid1 as queued but not
counted as pending. The pending count is dropped when the original bio is
returned complete but write-behind for the r1bio may still be active.
This breaks the accounting used in some conditions to know when the raid1
md device has reached an idle state. It can result in calls to
freeze_array deadlocking. freeze_array will never complete from a negative
"unqueued" value being calculated due to a queued count larger than the
pending count.
To properly account for write-behind, move the call to allow_barrier from
call_bio_endio to raid_end_bio_io. When using write-behind, md can call
call_bio_endio before all write-behind I/O is complete. Using
raid_end_bio_io for the point to call allow_barrier will release the
pending count at a point where all I/O for an r1bio, even write-behind, is
done.
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Coly Li [Thu, 9 Apr 2020 14:17:23 +0000 (22:17 +0800)]
md: remove redundant memalloc scope API usage
In mddev_create_serial_pool(), memalloc scope APIs memalloc_noio_save()
and memalloc_noio_restore() are used when allocating memory by calling
mempool_create_kmalloc_pool(). After adding the memalloc scope APIs in
raid array suspend context, it is unncessary to explicitly call them
around mempool_create_kmalloc_pool() any longer.
This patch removes the redundant memalloc scope APIs in
mddev_create_serial_pool().
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Coly Li [Thu, 9 Apr 2020 14:17:22 +0000 (22:17 +0800)]
raid5: update code comment of scribble_alloc()
Code comments of scribble_alloc() is outdated for a while. This patch
update the comments in function header for the new parameter list.
Suggested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Coly Li [Thu, 9 Apr 2020 14:17:21 +0000 (22:17 +0800)]
raid5: remove gfp flags from scribble_alloc()
Using GFP_NOIO flag to call scribble_alloc() from resize_chunk() does
not have the expected behavior. kvmalloc_array() inside scribble_alloc()
which receives the GFP_NOIO flag will eventually call kmalloc_node() to
allocate physically continuous pages.
Now we have memalloc scope APIs in mddev_suspend()/mddev_resume() to
prevent memory reclaim I/Os during raid array suspend context, calling
to kvmalloc_array() with GFP_KERNEL flag may avoid deadlock of recursive
I/O as expected.
This patch removes the useless gfp flags from parameters list of
scribble_alloc(), and call kvmalloc_array() with GFP_KERNEL flag. The
incorrect GFP_NOIO flag does not exist anymore.
Fixes:
b330e6a49dc3 ("md: convert to kvmalloc")
Suggested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Coly Li [Thu, 9 Apr 2020 14:17:20 +0000 (22:17 +0800)]
md: use memalloc scope APIs in mddev_suspend()/mddev_resume()
In raid5.c:resize_chunk(), scribble_alloc() is called with GFP_NOIO
flag, then it is sent into kvmalloc_array() inside scribble_alloc().
The problem is kvmalloc_array() eventually calls kvmalloc_node() which
does not accept non GFP_KERNEL compatible flag like GFP_NOIO, then
kmalloc_node() is called indeed to allocate physically continuous
pages. When system memory is under heavy pressure, and the requesting
size is large, there is high probability that allocating continueous
pages will fail.
But simply using GFP_KERNEL flag to call kvmalloc_array() is also
progblematic. In the code path where scribble_alloc() is called, the
raid array is suspended, if kvmalloc_node() triggers memory reclaim I/Os
and such I/Os go back to the suspend raid array, deadlock will happen.
What is desired here is to allocate non-physically (a.k.a virtually)
continuous pages and avoid memory reclaim I/Os. Michal Hocko suggests
to use the mmealloc sceope APIs to restrict memory reclaim I/O in
allocating context, specifically to call memalloc_noio_save() when
suspend the raid array and to call memalloc_noio_restore() when
resume the raid array.
This patch adds the memalloc scope APIs in mddev_suspend() and
mddev_resume(), to restrict memory reclaim I/Os during the raid array
is suspended. The benifit of adding the memalloc scope API in the
unified entry point mddev_suspend()/mddev_resume() is, no matter which
md raid array type (personality), we are sure the deadlock by recursive
memory reclaim I/O won't happen on the suspending context.
Please notice that the memalloc scope APIs only take effect on the raid
array suspending context, if the memory allocation is from another new
created kthread after raid array suspended, the recursive memory reclaim
I/Os won't be restricted. The mddev_suspend()/mddev_resume() entries are
used for the critical section where the raid metadata is modifying,
creating a kthread to allocate memory inside the critical section is
queer and very probably being buggy.
Fixes:
b330e6a49dc3 ("md: convert to kvmalloc")
Suggested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
Guoqing Jiang [Sat, 4 Apr 2020 21:57:11 +0000 (23:57 +0200)]
md: remove the extra line for ->hot_add_disk
It is not not necessary to add a newline for them since they don't exceed
80 characters, and it is not intutive to distinguish ->hot_add_disk() from
hot_add_disk() too.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Guoqing Jiang [Sat, 4 Apr 2020 21:57:10 +0000 (23:57 +0200)]
md: flush md_rdev_misc_wq for HOT_ADD_DISK case
Since rdev->kobj is removed asynchronously, it is possible that the
rdev->kobj still exists when try to add the rdev again after rdev
is removed. But this path md_ioctl (HOT_ADD_DISK) -> hot_add_disk
-> bind_rdev_to_array missed it.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Guoqing Jiang [Sat, 4 Apr 2020 21:57:09 +0000 (23:57 +0200)]
md: don't flush workqueue unconditionally in md_open
We need to check mddev->del_work before flush workqueu since the purpose
of flush is to ensure the previous md is disappeared. Otherwise the similar
deadlock appeared if LOCKDEP is enabled, it is due to md_open holds the
bdev->bd_mutex before flush workqueue.
kernel: [ 154.522645] ======================================================
kernel: [ 154.522647] WARNING: possible circular locking dependency detected
kernel: [ 154.522650] 5.6.0-rc7-lp151.27-default #25 Tainted: G O
kernel: [ 154.522651] ------------------------------------------------------
kernel: [ 154.522653] mdadm/2482 is trying to acquire lock:
kernel: [ 154.522655]
ffff888078529128 ((wq_completion)md_misc){+.+.}, at: flush_workqueue+0x84/0x4b0
kernel: [ 154.522673]
kernel: [ 154.522673] but task is already holding lock:
kernel: [ 154.522675]
ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590
kernel: [ 154.522691]
kernel: [ 154.522691] which lock already depends on the new lock.
kernel: [ 154.522691]
kernel: [ 154.522694]
kernel: [ 154.522694] the existing dependency chain (in reverse order) is:
kernel: [ 154.522696]
kernel: [ 154.522696] -> #4 (&bdev->bd_mutex){+.+.}:
kernel: [ 154.522704] __mutex_lock+0x87/0x950
kernel: [ 154.522706] __blkdev_get+0x79/0x590
kernel: [ 154.522708] blkdev_get+0x65/0x140
kernel: [ 154.522709] blkdev_get_by_dev+0x2f/0x40
kernel: [ 154.522716] lock_rdev+0x3d/0x90 [md_mod]
kernel: [ 154.522719] md_import_device+0xd6/0x1b0 [md_mod]
kernel: [ 154.522723] new_dev_store+0x15e/0x210 [md_mod]
kernel: [ 154.522728] md_attr_store+0x7a/0xc0 [md_mod]
kernel: [ 154.522732] kernfs_fop_write+0x117/0x1b0
kernel: [ 154.522735] vfs_write+0xad/0x1a0
kernel: [ 154.522737] ksys_write+0xa4/0xe0
kernel: [ 154.522745] do_syscall_64+0x64/0x2b0
kernel: [ 154.522748] entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [ 154.522749]
kernel: [ 154.522749] -> #3 (&mddev->reconfig_mutex){+.+.}:
kernel: [ 154.522752] __mutex_lock+0x87/0x950
kernel: [ 154.522756] new_dev_store+0xc9/0x210 [md_mod]
kernel: [ 154.522759] md_attr_store+0x7a/0xc0 [md_mod]
kernel: [ 154.522761] kernfs_fop_write+0x117/0x1b0
kernel: [ 154.522763] vfs_write+0xad/0x1a0
kernel: [ 154.522765] ksys_write+0xa4/0xe0
kernel: [ 154.522767] do_syscall_64+0x64/0x2b0
kernel: [ 154.522769] entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [ 154.522770]
kernel: [ 154.522770] -> #2 (kn->count#253){++++}:
kernel: [ 154.522775] __kernfs_remove+0x253/0x2c0
kernel: [ 154.522778] kernfs_remove+0x1f/0x30
kernel: [ 154.522780] kobject_del+0x28/0x60
kernel: [ 154.522783] mddev_delayed_delete+0x24/0x30 [md_mod]
kernel: [ 154.522786] process_one_work+0x2a7/0x5f0
kernel: [ 154.522788] worker_thread+0x2d/0x3d0
kernel: [ 154.522793] kthread+0x117/0x130
kernel: [ 154.522795] ret_from_fork+0x3a/0x50
kernel: [ 154.522796]
kernel: [ 154.522796] -> #1 ((work_completion)(&mddev->del_work)){+.+.}:
kernel: [ 154.522800] process_one_work+0x27e/0x5f0
kernel: [ 154.522802] worker_thread+0x2d/0x3d0
kernel: [ 154.522804] kthread+0x117/0x130
kernel: [ 154.522806] ret_from_fork+0x3a/0x50
kernel: [ 154.522807]
kernel: [ 154.522807] -> #0 ((wq_completion)md_misc){+.+.}:
kernel: [ 154.522813] __lock_acquire+0x1392/0x1690
kernel: [ 154.522816] lock_acquire+0xb4/0x1a0
kernel: [ 154.522818] flush_workqueue+0xab/0x4b0
kernel: [ 154.522821] md_open+0xb6/0xc0 [md_mod]
kernel: [ 154.522823] __blkdev_get+0xea/0x590
kernel: [ 154.522825] blkdev_get+0x65/0x140
kernel: [ 154.522828] do_dentry_open+0x1d1/0x380
kernel: [ 154.522831] path_openat+0x567/0xcc0
kernel: [ 154.522834] do_filp_open+0x9b/0x110
kernel: [ 154.522836] do_sys_openat2+0x201/0x2a0
kernel: [ 154.522838] do_sys_open+0x57/0x80
kernel: [ 154.522840] do_syscall_64+0x64/0x2b0
kernel: [ 154.522842] entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [ 154.522844]
kernel: [ 154.522844] other info that might help us debug this:
kernel: [ 154.522844]
kernel: [ 154.522846] Chain exists of:
kernel: [ 154.522846] (wq_completion)md_misc --> &mddev->reconfig_mutex --> &bdev->bd_mutex
kernel: [ 154.522846]
kernel: [ 154.522850] Possible unsafe locking scenario:
kernel: [ 154.522850]
kernel: [ 154.522852] CPU0 CPU1
kernel: [ 154.522853] ---- ----
kernel: [ 154.522854] lock(&bdev->bd_mutex);
kernel: [ 154.522856] lock(&mddev->reconfig_mutex);
kernel: [ 154.522858] lock(&bdev->bd_mutex);
kernel: [ 154.522860] lock((wq_completion)md_misc);
kernel: [ 154.522861]
kernel: [ 154.522861] *** DEADLOCK ***
kernel: [ 154.522861]
kernel: [ 154.522864] 1 lock held by mdadm/2482:
kernel: [ 154.522865] #0:
ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590
kernel: [ 154.522868]
kernel: [ 154.522868] stack backtrace:
kernel: [ 154.522873] CPU: 1 PID: 2482 Comm: mdadm Tainted: G O 5.6.0-rc7-lp151.27-default #25
kernel: [ 154.522875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
kernel: [ 154.522878] Call Trace:
kernel: [ 154.522881] dump_stack+0x8f/0xcb
kernel: [ 154.522884] check_noncircular+0x194/0x1b0
kernel: [ 154.522888] ? __lock_acquire+0x1392/0x1690
kernel: [ 154.522890] __lock_acquire+0x1392/0x1690
kernel: [ 154.522893] lock_acquire+0xb4/0x1a0
kernel: [ 154.522895] ? flush_workqueue+0x84/0x4b0
kernel: [ 154.522898] flush_workqueue+0xab/0x4b0
kernel: [ 154.522900] ? flush_workqueue+0x84/0x4b0
kernel: [ 154.522905] ? md_open+0xb6/0xc0 [md_mod]
kernel: [ 154.522908] md_open+0xb6/0xc0 [md_mod]
kernel: [ 154.522910] __blkdev_get+0xea/0x590
kernel: [ 154.522912] ? bd_acquire+0xc0/0xc0
kernel: [ 154.522914] blkdev_get+0x65/0x140
kernel: [ 154.522916] ? bd_acquire+0xc0/0xc0
kernel: [ 154.522918] do_dentry_open+0x1d1/0x380
kernel: [ 154.522921] path_openat+0x567/0xcc0
kernel: [ 154.522923] ? __lock_acquire+0x380/0x1690
kernel: [ 154.522926] do_filp_open+0x9b/0x110
kernel: [ 154.522929] ? __alloc_fd+0xe5/0x1f0
kernel: [ 154.522935] ? kmem_cache_alloc+0x28c/0x630
kernel: [ 154.522939] ? do_sys_openat2+0x201/0x2a0
kernel: [ 154.522941] do_sys_openat2+0x201/0x2a0
kernel: [ 154.522944] do_sys_open+0x57/0x80
kernel: [ 154.522946] do_syscall_64+0x64/0x2b0
kernel: [ 154.522948] entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [ 154.522951] RIP: 0033:0x7f98d279d9ae
And md_alloc also flushed the same workqueue, but the thing is different
here. Because all the paths call md_alloc don't hold bdev->bd_mutex, and
the flush is necessary to avoid race condition, so leave it as it is.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Guoqing Jiang [Sat, 4 Apr 2020 21:57:08 +0000 (23:57 +0200)]
md: add new workqueue for delete rdev
Since the purpose of call flush_workqueue in new_dev_store is to ensure
md_delayed_delete() has completed, so we should check rdev->del_work is
pending or not.
To suppress lockdep warning, we have to check mddev->del_work while
md_delayed_delete is attached to rdev->del_work, so it is not aligned
to the purpose of flush workquee. So a new workqueue is needed to avoid
the awkward situation, and introduce a new func flush_rdev_wq to flush
the new workqueue after check if there was pending work.
Also like new_dev_store, ADD_NEW_DISK ioctl has the same purpose to flush
workqueue while it holds bdev->bd_mutex, so make the same change applies
to the ioctl to avoid similar lock issue.
And md_delayed_delete actually wants to delete rdev, so rename the function
to rdev_delayed_delete.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Guoqing Jiang [Sat, 4 Apr 2020 21:57:07 +0000 (23:57 +0200)]
md: add checkings before flush md_misc_wq
Coly reported possible circular locking dependencyi with LOCKDEP enabled,
quote the below info from the detailed report [1].
[ 1607.673903] Chain exists of:
[ 1607.673903] kn->count#256 --> (wq_completion)md_misc -->
(work_completion)(&rdev->del_work)
[ 1607.673903]
[ 1607.827946] Possible unsafe locking scenario:
[ 1607.827946]
[ 1607.898780] CPU0 CPU1
[ 1607.952980] ---- ----
[ 1608.007173] lock((work_completion)(&rdev->del_work));
[ 1608.069690] lock((wq_completion)md_misc);
[ 1608.149887] lock((work_completion)(&rdev->del_work));
[ 1608.242563] lock(kn->count#256);
[ 1608.283238]
[ 1608.283238] *** DEADLOCK ***
[ 1608.283238]
[ 1608.354078] 2 locks held by kworker/5:0/843:
[ 1608.405152] #0:
ffff8889eecc9948 ((wq_completion)md_misc){+.+.}, at:
process_one_work+0x42b/0xb30
[ 1608.512399] #1:
ffff888a1d3b7e10
((work_completion)(&rdev->del_work)){+.+.}, at: process_one_work+0x42b/0xb30
[ 1608.632130]
Since works (rdev->del_work and mddev->del_work) are queued in md_misc_wq,
then lockdep_map lock is held if either of them are running, then both of
them try to hold kernfs lock by call kobject_del. Then if new_dev_store
or array_state_store are triggered by write to the related sysfs node, so
the write operation gets kernfs lock, but need the lockdep_map because all
of them would trigger flush_workqueue(md_misc_wq) finally, then the same
lockdep_map lock is needed.
To suppress the lockdep warnning, we should flush the workqueue in case the
related work is pending. And several works are attached to md_misc_wq, so
we need to check which work should be checked:
1. for __md_stop_writes, the purpose of call flush workqueue is ensure sync
thread is started if it was starting, so check mddev->del_work is pending
or not since md_start_sync is attached to mddev->del_work.
2. __md_stop flushes md_misc_wq to ensure event_work is done, check the
event_work is enough. Assume raid_{ctr,dtr} -> md_stop -> __md_stop doesn't
need the kernfs lock.
3. both new_dev_store (holds kernfs lock) and ADD_NEW_DISK ioctl (holds the
bdev->bd_mutex) call flush_workqueue to ensure md_delayed_delete has
completed, this case will be handled in next patch.
4. md_open flushes workqueue to ensure the previous md is disappeared, but
it holds bdev->bd_mutex then try to flush workqueue, so it is better to
check mddev->del_work as well to avoid potential lock issue, this will be
done in another patch.
[1]: https://marc.info/?l=linux-raid&m=
158518958031584&w=2
Cc: Coly Li <colyli@suse.de>
Reported-by: Coly Li <colyli@suse.de>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Jens Axboe [Tue, 12 May 2020 17:35:49 +0000 (11:35 -0600)]
Merge tag 'floppy-for-5.8' of https://github.com/evdenis/linux-floppy into for-5.8/drivers
Floppy patches for 5.8
Cleanups:
- symbolic register names for x86,sparc64,sparc32,powerpc,parisc,m68k
- split of local/global variables for drive,fdc
- UBSAN warning suppress in setup_rw_floppy()
Changes were compile tested on arm, sparc64, powerpc, m68k. Many patches
introduce no binary changes by using defines instead of magic numbers.
The patches were also tested with syzkaller and simple write/read/format
tests on real hardware.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* tag 'floppy-for-5.8' of https://github.com/evdenis/linux-floppy: (31 commits)
floppy: suppress UBSAN warning in setup_rw_floppy()
floppy: add defines for sizes of cmd & reply buffers of floppy_raw_cmd
floppy: add FD_AUTODETECT_SIZE define for struct floppy_drive_params
floppy: use print_hex_dump() in setup_DMA()
floppy: cleanup: make set_fdc() always set current_drive and current_fd
floppy: cleanup: get rid of current_reqD in favor of current_drive
floppy: make sure to reset all FDCs upon resume()
floppy: cleanup: do not iterate on current_fdc in do_floppy_init()
floppy: cleanup: add a few comments about expectations in certain functions
floppy: cleanup: do not iterate on current_fdc in DMA grab/release functions
floppy: cleanup: make get_fdc_version() not rely on current_fdc anymore
floppy: cleanup: make next_valid_format() not rely on current_drive anymore
floppy: cleanup: make check_wp() not rely on current_{fdc,drive} anymore
floppy: cleanup: make fdc_specify() not rely on current_{fdc,drive} anymore
floppy: cleanup: make fdc_configure() not rely on current_fdc anymore
floppy: cleanup: make perpendicular_mode() not rely on current_fdc anymore
floppy: cleanup: make need_more_output() not rely on current_fdc anymore
floppy: cleanup: make result() not rely on current_fdc anymore
floppy: cleanup: make output_byte() not rely on current_fdc anymore
floppy: cleanup: make wait_til_ready() not rely on current_fdc anymore
...
Denis Efremov [Fri, 1 May 2020 13:44:16 +0000 (16:44 +0300)]
floppy: suppress UBSAN warning in setup_rw_floppy()
UBSAN: array-index-out-of-bounds in drivers/block/floppy.c:1521:45
index 16 is out of range for type 'unsigned char [16]'
Call Trace:
...
setup_rw_floppy+0x5c3/0x7f0
floppy_ready+0x2be/0x13b0
process_one_work+0x2c1/0x5d0
worker_thread+0x56/0x5e0
kthread+0x122/0x170
ret_from_fork+0x35/0x40
From include/uapi/linux/fd.h:
struct floppy_raw_cmd {
...
unsigned char cmd_count;
unsigned char cmd[16];
unsigned char reply_count;
unsigned char reply[16];
...
}
This out-of-bounds access is intentional. The command in struct
floppy_raw_cmd may take up the space initially intended for the reply
and the reply count. It is needed for long 82078 commands such as
RESTORE, which takes 17 command bytes. Initial cmd size is not enough
and since struct setup_rw_floppy is a part of uapi we check that
cmd_count is in [0:16+1+16] in raw_cmd_copyin().
The patch adds union with original cmd,reply_count,reply fields and
fullcmd field of equivalent size. The cmd accesses are turned to
fullcmd where appropriate to suppress UBSAN warning.
Link: https://lore.kernel.org/r/20200501134416.72248-5-efremov@linux.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Denis Efremov <efremov@linux.com>
Denis Efremov [Fri, 1 May 2020 13:44:15 +0000 (16:44 +0300)]
floppy: add defines for sizes of cmd & reply buffers of floppy_raw_cmd
Use FD_RAW_CMD_SIZE, FD_RAW_REPLY_SIZE defines instead of magic numbers
for cmd & reply buffers of struct floppy_raw_cmd. Remove local to
floppy.c MAX_REPLIES define, as it is now FD_RAW_REPLY_SIZE.
FD_RAW_CMD_FULLSIZE added as we allow command to also fill reply_count
and reply fields.
Link: https://lore.kernel.org/r/20200501134416.72248-4-efremov@linux.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Denis Efremov <efremov@linux.com>
Denis Efremov [Fri, 1 May 2020 13:44:14 +0000 (16:44 +0300)]
floppy: add FD_AUTODETECT_SIZE define for struct floppy_drive_params
Use FD_AUTODETECT_SIZE for autodetect buffer size in struct
floppy_drive_params instead of a magic number.
Link: https://lore.kernel.org/r/20200501134416.72248-3-efremov@linux.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Denis Efremov <efremov@linux.com>
Denis Efremov [Fri, 1 May 2020 13:44:13 +0000 (16:44 +0300)]
floppy: use print_hex_dump() in setup_DMA()
Remove pr_cont() and use print_hex_dump() in setup_DMA() to print the
contents of the cmd buffer.
Link: https://lore.kernel.org/r/20200501134416.72248-2-efremov@linux.com
Suggested-by: Joe Perches <joe@perches.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Fri, 10 Apr 2020 10:19:04 +0000 (12:19 +0200)]
floppy: cleanup: make set_fdc() always set current_drive and current_fd
When called with a negative drive value, set_fdc() would stick to the
current fdc (which was assumed to reflect the current_drive's FDC). We
do not need this anymore as the last call place with a negative value
was just addressed. Let's make this function always set both current_fdc
and current_drive so that there's no more ambiguity. A few comments
stating this were added to a few non-obvious places.
Link: https://lore.kernel.org/r/20200410101904.14652-3-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Fri, 10 Apr 2020 10:19:03 +0000 (12:19 +0200)]
floppy: cleanup: get rid of current_reqD in favor of current_drive
This macro equals -1 and is used as an alternative for current_drive when
calling reschedule_timeout(), which in turn needs to remap it. This only
adds obfuscation, let's simply use current_drive.
Link: https://lore.kernel.org/r/20200410101904.14652-2-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Fri, 10 Apr 2020 10:19:02 +0000 (12:19 +0200)]
floppy: make sure to reset all FDCs upon resume()
In floppy_resume() we don't properly reinitialize all FDCs, instead
we reinitialize the current FDC once per available FDC because value
-1 is passed to user_reset_fdc(). Let's simply save the current drive
and properly reinitialize each FDC.
Link: https://lore.kernel.org/r/20200410101904.14652-1-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Fri, 10 Apr 2020 09:30:23 +0000 (11:30 +0200)]
floppy: cleanup: do not iterate on current_fdc in do_floppy_init()
There's no need to iterate on current_fdc in do_floppy_init() anymore,
in the first case it's only used as an array index to access fdc_state[],
so let's get rid of this confusing assignment. The second case is a bit
trickier because user_reset_fdc() needs to already know current_fdc when
called with drive==-1 due to this call chain:
user_reset_fdc()
lock_fdc()
set_fdc()
drive<0 ==> new_fdc = current_fdc
Note that current_drive is not used in this code part and may even not
match a unit belonging to current_fdc. Instead of passing -1 we can
simply pass the first drive of the FDC being initialized, which is even
cleaner as it will allow the function chain above to consistently assign
both variables.
Link: https://lore.kernel.org/r/20200410093023.14499-1-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:54 +0000 (11:40 +0200)]
floppy: cleanup: add a few comments about expectations in certain functions
The locking in the driver is far from being obvious, with unlocking
automatically happening at end of operations scheduled by interrupt,
especially for the error paths where one does not necessarily expect
that such an interrupt may be triggered. Let's add a few comments
about what to expect at certain places to avoid misdetecting bugs
which are not.
Link: https://lore.kernel.org/r/20200331094054.24441-24-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:53 +0000 (11:40 +0200)]
floppy: cleanup: do not iterate on current_fdc in DMA grab/release functions
Both floppy_grab_irq_and_dma() and floppy_release_irq_and_dma() used to
iterate on the global variable while setting up or freeing resources.
Now that they exclusively rely on functions which take the fdc as an
argument, so let's not touch the global one anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-23-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:52 +0000 (11:40 +0200)]
floppy: cleanup: make get_fdc_version() not rely on current_fdc anymore
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-22-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:51 +0000 (11:40 +0200)]
floppy: cleanup: make next_valid_format() not rely on current_drive anymore
Now the drive is passed in argument so that the function does not
use current_drive anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-21-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:50 +0000 (11:40 +0200)]
floppy: cleanup: make check_wp() not rely on current_{fdc,drive} anymore
Now the fdc and drive are passed in argument so that the function does
not use current_fdc nor current_drive anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-20-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:49 +0000 (11:40 +0200)]
floppy: cleanup: make fdc_specify() not rely on current_{fdc,drive} anymore
Now the fdc and drive are passed in argument so that the function does
not use current_fdc nor current_drive anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-19-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:48 +0000 (11:40 +0200)]
floppy: cleanup: make fdc_configure() not rely on current_fdc anymore
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-18-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:47 +0000 (11:40 +0200)]
floppy: cleanup: make perpendicular_mode() not rely on current_fdc anymore
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
It's worth noting that there's still a single raw_cmd pointer
specific to the current fdc. It may make sense to have one per
fdc in the future. In addition, cont->done() still relies on the
current drive and current raw_cmd.
Link: https://lore.kernel.org/r/20200331094054.24441-17-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:46 +0000 (11:40 +0200)]
floppy: cleanup: make need_more_output() not rely on current_fdc anymore
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-16-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:45 +0000 (11:40 +0200)]
floppy: cleanup: make result() not rely on current_fdc anymore
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
It's worth noting that there's still a single reply_buffer[] which
will store the result for the current fdc. It may or may not make
sense to implement one buffer per fdc in the future.
Link: https://lore.kernel.org/r/20200331094054.24441-15-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:44 +0000 (11:40 +0200)]
floppy: cleanup: make output_byte() not rely on current_fdc anymore
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-14-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:43 +0000 (11:40 +0200)]
floppy: cleanup: make wait_til_ready() not rely on current_fdc anymore
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-13-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:42 +0000 (11:40 +0200)]
floppy: cleanup: make show_floppy() not rely on current_fdc anymore
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-12-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:41 +0000 (11:40 +0200)]
floppy: cleanup: make reset_fdc_info() not rely on current_fdc anymore
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-11-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:40 +0000 (11:40 +0200)]
floppy: cleanup: make twaddle() not rely on current_{fdc,drive} anymore
Now the fdc and drive are passed in argument so that the function does
not use current_fdc nor current_drive anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-10-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:39 +0000 (11:40 +0200)]
floppy: use symbolic register names in the x86 port
Now we can use FD_STATUS and FD_DATA instead of 4 or 5, let's do
this, and also use STATUS_DMA and STATUS_READY for the status bits.
Link: https://lore.kernel.org/r/20200331094054.24441-9-w@1wt.eu
Cc: x86@kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:38 +0000 (11:40 +0200)]
floppy: use symbolic register names in the sparc64 port
Now by splitting the base address from the register index we can
use the symbolic register names instead of the hard-coded numeric
values.
Link: https://lore.kernel.org/r/20200331094054.24441-8-w@1wt.eu
Cc: "David S. Miller" <davem@davemloft.net>
[willy: fix printk warnings s/%lx/%x/g in sun_82077_fd_{inb,outb}()]
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:37 +0000 (11:40 +0200)]
floppy: use symbolic register names in the sparc32 port
The sparc port used to be forced to rely on numeric register indexes
with their equivalent in comments. Now that they don't depend on the
IO port we can use their symbolic names.
Link: https://lore.kernel.org/r/20200331094054.24441-7-w@1wt.eu
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:36 +0000 (11:40 +0200)]
floppy: use symbolic register names in the powerpc port
Now we can use FD_STATUS and FD_DATA instead of 4 or 5, let's do
this, and also use STATUS_DMA and STATUS_READY for the status bits.
Link: https://lore.kernel.org/r/20200331094054.24441-6-w@1wt.eu
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:35 +0000 (11:40 +0200)]
floppy: use symbolic register names in the parisc port
Now we can use FD_STATUS and FD_DATA instead of 4 or 5, let's do
this, and also use STATUS_DMA and STATUS_READY for the status bits.
Link: https://lore.kernel.org/r/20200331094054.24441-5-w@1wt.eu
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:34 +0000 (11:40 +0200)]
floppy: use symbolic register names in the m68k port
Now we can use FD_STATUS and FD_DATA instead of 4 or 5, let's do
this, and also use STATUS_DMA and STATUS_READY for the status bits.
Link: https://lore.kernel.org/r/20200331094054.24441-4-w@1wt.eu
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:33 +0000 (11:40 +0200)]
floppy: add references to 82077's extra registers
This controller provides extra status registers SRA and SRB as well
as a tape drive register (TDR) and a data rate select register (DSR),
which are referenced in the sparc port, so let's have their symbolic
definitions centralized.
Link: https://lore.kernel.org/r/20200331094054.24441-3-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Willy Tarreau [Tue, 31 Mar 2020 09:40:32 +0000 (11:40 +0200)]
floppy: split the base port from the register in I/O accesses
Currently we have architecture-specific fd_inb() and fd_outb() functions
or macros, taking just a port which is in fact made of a base address and
a register. The base address is FDC-specific and derived from the local or
global "fdc" variable through the FD_IOPORT macro used in the base address
calculation.
This change splits this by explicitly passing the FDC's base address and
the register separately to fd_outb() and fd_inb(). It affects the
following archs:
- x86, alpha, mips, powerpc, parisc, arm, m68k:
simple remap of port -> base+reg
- sparc32: use of reg only, since the base address was already masked
out and the FDC controller is known from a static struct.
- sparc64: like x86 for PCI, like sparc32 for 82077
Some archs use inline functions and others macros. This was not
unified in order to minimize the number of changes to review. For the
same reason checkpatch still spews a few warnings about things that
were already there before.
The parisc still uses hard-coded register values and could be cleaned up
by taking the register definitions.
The sparc per-controller inb/outb functions could further be refined
to explicitly take an FDC register instead of a port in argument but it
was not needed yet and may be cleaned later.
Link: https://lore.kernel.org/r/20200331094054.24441-2-w@1wt.eu
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: x86@kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Keith Busch [Fri, 3 Apr 2020 17:53:46 +0000 (10:53 -0700)]
nvme: define constants for identification values
Improve code readability by defining the specification's constants that
the driver is using when decoding identification payloads.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Chaitanya Kulkarni [Mon, 4 May 2020 08:56:48 +0000 (01:56 -0700)]
nvmet: align addrfam list to spec
With reference to the NVMeOF Specification (page 44, Figure 38)
discovery log page entry provides address family field. We do set the
transport type field but the adrfam field is not set when using loop
transport and also it doesn't have support in the nvme-cli. So when
reading discovery log page with a loop transport it leads to confusing
output.
As per the spec for adrfam value 254 is reserved for Intra Host
Transport i.e. loopback), we add a required macro in the protocol
header file, set default port disc addr entry's adrfam to
NVMF_ADDR_FAMILY_MAX, and update nvmet_addr_family configfs array for
show/store attribute.
Without this patch, setting adrfam to (ipv4/ipv6/ib/fc/loop/" ") we get
following output for nvme discover command from nvme-cli which is
confusing.
trtype: loop
adrfam: ipv4
trtype: loop
adrfam: ipv6
trtype: loop
adrfam: infiniband
trtype: loop
adrfam: fibre-channel
trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = loop
adrfam: pci # <----- pci for loop
trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = " "
adrfam: pci # <----- pci for unrecognized
This patch fixes above output :-
trtype: loop
adrfam: ipv4
trtype: loop
adrfam: ipv6
trtype: loop
adrfam: infiniband
trtype: loop
adrfam: fibre-channel
trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = loop
adrfam: loop # <----- loop for loop
trtype: loop # ${CFGFS_HOME}/config/nvmet/ports/adrfam = " "
adrfam: unrecognized # <----- unrecognized when invalid value
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Chaitanya Kulkarni [Mon, 4 May 2020 08:56:47 +0000 (01:56 -0700)]
nvmet: centralize port enable access for configfs
The configfs attributes which are supposed to set when port is disable
such as addr[addrfam|portid|traddr|treq|trsvcid|inline_data_size|trtype]
has repetitive check and generic error message printing.
This patch creates centralize helper to check and print an error
message that also accepts caller as a parameter. This makes error
message easy to parse for the user, removes the duplicate code and
makes it available for futures such scenarios.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Chaitanya Kulkarni [Mon, 4 May 2020 08:56:46 +0000 (01:56 -0700)]
nvmet: use type-name map for address treq
Currently nvmet_addr_treq_[store|show]() uses switch and if else
ladder for address transport requirements to string and reverse
mapping. With addtion of the generic nvmet_type_name_map structure
we can get rid of the switch and if else ladder with string
duplication.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Chaitanya Kulkarni [Mon, 4 May 2020 08:56:45 +0000 (01:56 -0700)]
nvmet: use type-name map for ana states
Now that we have a generic type to name map for configfs, get rid of
the nvmet_ana_state_names structure and replace it with newly added
nvmet_type_name_map.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Chaitanya Kulkarni [Mon, 4 May 2020 08:56:44 +0000 (01:56 -0700)]
nvmet: use type-name map for address family
Right now nvmet_addr_adrfam_[store|show]() uses switch and if else
ladder for address family to string and reverse mapping which also
repeats the strings in show and store function.
With addition of generic nvmet_type_name_map structure we can now get rid
of the switch and if else ladder and string duplication.
Also, we add a newline in before found label in nvmet_addr_trtype_store()
which keeps goto label code consistent with
nvmet_allowed_hosts_drop_link(), nvmet_port_subsys_drop_link() and
nvmet_ana_group_ana_state_store().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Chaitanya Kulkarni [Mon, 4 May 2020 08:56:43 +0000 (01:56 -0700)]
nvmet: add generic type-name mapping
This patch adds a new type to name mapping generic structure. It
replaces nvmet_transport_name with new generic mapping structure
nvmet_transport.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Sun, 29 Mar 2020 17:41:38 +0000 (19:41 +0200)]
nvme-multipath: stop using ->queuedata
nvme-multipath already uses the gendisk private data, not need to
also set up the request_queue queuedata and use it in one place only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sagi Grimberg [Fri, 1 May 2020 21:25:45 +0000 (14:25 -0700)]
nvme-tcp: try to send request in queue_rq context
Today, nvme-tcp automatically schedules a send request
to a workqueue context, which is 1 more than we'd need
in case the socket buffer is wide open.
However, because we have async send activity (as a result
of r2t, or write_space callbacks), we need to synchronize
sends from possibly multiple contexts (ideally all running
on the same cpu though).
Thus, we only try to send directly from queue_rq in cases:
1. the send_list is empty
2. we can send it synchronously (i.e. not from the RX path)
3. we run on the same cpu as the queue->io_cpu to avoid
contention on the send operation.
Proposed-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sagi Grimberg [Fri, 1 May 2020 21:25:44 +0000 (14:25 -0700)]
nvme-tcp: avoid scheduling io_work if we are already polling
When the user runs polled I/O, we shouldn't have to trigger
the workqueue to generate the receive work upon the .data_ready
upcall. This prevents a redundant context switch when the
application is already polling for completions.
Proposed-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sagi Grimberg [Thu, 30 Apr 2020 20:59:32 +0000 (13:59 -0700)]
nvme-tcp: use bh_lock in data_ready
data_ready may be invoked from send context or from
softirq, so need bh locking for that.
Fixes:
3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Weiping Zhang [Sat, 2 May 2020 07:29:41 +0000 (15:29 +0800)]
nvme-pci: align io queue count with allocted nvme_queue in nvme_probe
Since commit
147b27e4bd08 ("nvme-pci: allocate device queues storage
space at probe"), nvme_alloc_queue does not alloc the nvme queues
itself anymore.
If the write/poll_queues module parameters are changed at runtime to
values larger than the number of allocated queues in nvme_probe,
nvme_alloc_queue will access unallocated memory.
Add a new nr_allocated_queues member to struct nvme_dev to record how
many queues were alloctated in nvme_probe to avoid using more than the
allocated queues after a reset following a change to the
write/poll_queues module parameters.
Also add nr_write_queues and nr_poll_queues members to allow refreshing
the number of write and poll queues based on a change to the module
parameters when resetting the controller.
Fixes:
147b27e4bd08 ("nvme-pci: allocate device queues storage space at probe")
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
[hch: add nvme_max_io_queues, update the commit message]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Mon, 27 Apr 2020 18:54:46 +0000 (11:54 -0700)]
nvme-pci: remove last_sq_tail
The nvme driver does not have enough tags to wrap the queue, and blk-mq
will no longer call commit_rqs() when there are no new submissions to
notify.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Tue, 28 Apr 2020 14:21:56 +0000 (07:21 -0700)]
nvme-pci: remove volatile cqes
The completion queue entry is not volatile once the phase is confirmed.
Remove the volatile keywords and check the phase using the appropriate
READ_ONCE() accessor, allowing the compiler to optimize the remaining
completion path.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Wed, 29 Apr 2020 20:31:23 +0000 (05:31 +0900)]
nvme: flush scan work on passthrough commands
If a passthrough command causes the namespace inventory or capabilities
to change, flush the scan work that handles these changes so the driver
synchronizes with the user command's effects before returning the result
to user space.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Wed, 22 Apr 2020 07:59:08 +0000 (09:59 +0200)]
nvme: clean up error handling in nvme_init_ns_head
Use a common label for putting the nshead if needed and only convert
nvme status codes for the one case where it actually is needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Arnd Bergmann [Thu, 30 Apr 2020 21:30:57 +0000 (23:30 +0200)]
nvme-fc: avoid gcc-10 zero-length-bounds warning
When CONFIG_ARCH_NO_SG_CHAIN is set, op->sgl[0] cannot be dereferenced,
as gcc-10 now points out:
drivers/nvme/host/fc.c: In function 'nvme_fc_init_request':
drivers/nvme/host/fc.c:1774:29: warning: array subscript 0 is outside the bounds of an interior zero-length array 'struct scatterlist[0]' [-Wzero-length-bounds]
1774 | op->op.fcp_req.first_sgl = &op->sgl[0];
| ^~~~~~~~~~~
drivers/nvme/host/fc.c:98:21: note: while referencing 'sgl'
98 | struct scatterlist sgl[NVME_INLINE_SG_CNT];
| ^~~
I don't know if this is a legitimate warning or a false-positive.
If this is just a false alarm, the warning is easily suppressed
by interpreting the array as a pointer.
Fixes:
b1ae1a238900 ("nvme-fc: Avoid preallocating big SGL for data")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Anthony Iliopoulos [Sun, 19 Apr 2020 23:48:50 +0000 (16:48 -0700)]
nvmet: add ns revalidation support
Add support for detecting capacity changes on nvmet blockdev and file
backed namespaces. This allows for emulating and testing online resizing
of nvme devices and filesystems on top.
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
[chaitanya: Fix comments posted on V1]
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
[hch: reuse code a bit more]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Thu, 9 Apr 2020 16:09:08 +0000 (09:09 -0700)]
nvme: consolodate io settings
The stream parameters indicating optimal io settings were just getting
overwritten later. Rearrange the settings so the streams parameters can
be preserved if provided.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Thu, 9 Apr 2020 16:09:07 +0000 (09:09 -0700)]
nvme: revalidate namespace stream parameters
The stream parameters are based on the currently formatted logical block
size. Recheck these parameters on namespace revalidation so the
registered constraints will be accurate.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>