OSDN Git Service
Zack Rusin [Tue, 15 Jun 2021 18:23:34 +0000 (14:23 -0400)]
drm/vmwgfx: Fix a 64bit regression on svga3
Register accesses are always 4bytes, accidently this was changed to
a void pointer whwqich badly breaks 64bit archs when running on top
of svga3.
Fixes:
2cd80dbd3551 ("drm/vmwgfx: Add basic support for SVGA3")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615182336.995192-3-zackr@vmware.com
Zack Rusin [Tue, 15 Jun 2021 18:23:33 +0000 (14:23 -0400)]
drm/vmwgfx: Update device headers
Historically our device headers have been forked versions of the
internal device headers, this has made maintaining them a bit
of a burden. To fix the situation, going forward, the device headers
will be verbatim copies of the internal headers.
To do that the driver code has to be adapted to use pristine
device headers. This will make future update to the device
headers trivial and automatic.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615182336.995192-2-zackr@vmware.com
Zack Rusin [Tue, 15 Jun 2021 18:23:32 +0000 (14:23 -0400)]
MAINTAINERS: update vmwgfx info
Roland will be focusing on lavapipe over the next few months and
won't have time for vmwgfx.
vmwgfx is now maintained within drm-misc.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615182336.995192-1-zackr@vmware.com
Maxime Ripard [Mon, 24 May 2021 13:20:18 +0000 (15:20 +0200)]
drm/vc4: hdmi: Rely on interrupts to handle hotplug
DRM currently polls for the HDMI connector status every 10s, which can
be an issue when we connect/disconnect a display quickly or the device
on the other end only issues a hotplug pulse (for example on EDID
change).
Switch the driver to rely on the internal controller logic for the
BCM2711/RPi4.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524132018.264396-1-maxime@cerno.tech
Yu Jiahua [Wed, 16 Jun 2021 03:44:48 +0000 (19:44 -0800)]
drivers: gpu: add missing MODULE_DEVICE_TABLE in anx7625.c
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Signed-off-by: Yu Jiahua <yujiahua1@huawei.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616034448.34919-1-yujiahua1@huawei.com
Hridya Valsaraju [Thu, 3 Jun 2021 21:47:51 +0000 (14:47 -0700)]
dmabuf: Add the capability to expose DMA-BUF stats in sysfs
Overview
========
The patch adds DMA-BUF statistics to /sys/kernel/dmabuf/buffers. It
allows statistics to be enabled for each DMA-BUF in sysfs by enabling
the config CONFIG_DMABUF_SYSFS_STATS.
The following stats will be exposed by the interface:
/sys/kernel/dmabuf/buffers/<inode_number>/exporter_name
/sys/kernel/dmabuf/buffers/<inode_number>/size
/sys/kernel/dmabuf/buffers/<inode_number>/attachments/<attach_uid>/device
/sys/kernel/dmabuf/buffers/<inode_number>/attachments/<attach_uid>/map_counter
The inode_number is unique for each DMA-BUF and was added earlier [1]
in order to allow userspace to track DMA-BUF usage across different
processes.
Use Cases
=========
The interface provides a way to gather DMA-BUF per-buffer statistics
from production devices. These statistics will be used to derive DMA-BUF
per-exporter stats and per-device usage stats for Android Bug reports.
The corresponding userspace changes can be found at [2].
Telemetry tools will also capture this information(along with other
memory metrics) periodically as well as on important events like a
foreground app kill (which might have been triggered by Low Memory
Killer). It will also contribute to provide a snapshot of the system
memory usage on other events such as OOM kills and Application Not
Responding events.
Background
==========
Currently, there are two existing interfaces that provide information
about DMA-BUFs.
1) /sys/kernel/debug/dma_buf/bufinfo
debugfs is however unsuitable to be mounted in production systems and
cannot be considered as an alternative to the sysfs interface being
proposed.
2) proc/<pid>/fdinfo/<fd>
The proc/<pid>/fdinfo/<fd> files expose information about DMA-BUF fds.
However, the existing procfs interfaces can only provide information
about the buffers for which processes hold fds or have the buffers
mmapped into their address space. Since the procfs interfaces alone
cannot provide a full picture of all DMA-BUFs in the system, there is
the need for an alternate interface to provide this information on
production systems.
The patch contains the following major improvements over v1:
1) Each attachment is represented by its own directory to allow creating
a symlink to the importing device and to also provide room for future
expansion.
2) The number of distinct mappings of each attachment is exposed in a
separate file.
3) The per-buffer statistics are now in /sys/kernel/dmabuf/buffers
inorder to make the interface expandable in future.
All of the improvements above are based on suggestions/feedback from
Daniel Vetter and Christian König.
A shell script that can be run on a classic Linux environment to read
out the DMA-BUF statistics can be found at [3](suggested by John
Stultz).
[1]: https://lore.kernel.org/patchwork/patch/
1088791/
[2]: https://android-review.googlesource.com/q/topic:%22dmabuf-sysfs%22+(status:open%20OR%20status:merged)
[3]: https://android-review.googlesource.com/c/platform/system/memory/libmeminfo/+/
1549734
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hridya Valsaraju <hridya@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603214758.2955251-1-hridya@google.com
Ainux [Wed, 26 May 2021 11:15:15 +0000 (19:15 +0800)]
drm/ast: Add detect function support
The existence of the connector cannot be detected,
so add the detect function to support.
Signed-off-by: Ainux <ainux.wang@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526111515.40015-1-ainux.wang@gmail.com
Linus Walleij [Mon, 14 Jun 2021 18:11:35 +0000 (20:11 +0200)]
drm/panel: s6e63m0: Switch to DBI abstraction for SPI
The SPI access to s6e63m0 is using the DBI protocol, so switch
to using the elaborate DBI protocol implementation in the DRM
DBI helper library.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210614181135.1124445-2-linus.walleij@linaro.org
Linus Walleij [Mon, 14 Jun 2021 18:11:34 +0000 (20:11 +0200)]
drm/dbi: Support DBI typec1 read operations
Implement SPI reads for typec1, for SPI controllers that
can support 9bpw in addition to 8bpw (such as GPIO bit-banged
SPI).
9bpw emulation is not supported but we have to start with
something.
This is used by s6e63m0 to read display MTP information
which is used by the driver for backlight control.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210614181135.1124445-1-linus.walleij@linaro.org
Christian König [Wed, 5 May 2021 11:38:12 +0000 (13:38 +0200)]
dma-buf: add dma_fence_chain_alloc/free v3
Add a common allocation helper. Cleaning up the mix of kzalloc/kmalloc
and some unused code in the selftest.
v2: polish kernel doc a bit
v3: polish kernel doc even a bit more
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611120301.10595-3-christian.koenig@amd.com
Christian König [Wed, 5 May 2021 09:40:54 +0000 (11:40 +0200)]
dma-buf: some dma_fence_chain improvements
The callback and the irq work are never used at the same
time. Putting them into an union saves us 24 bytes and
makes the structure only 120 bytes in size.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611120301.10595-2-christian.koenig@amd.com
Leandro Ribeiro [Fri, 11 Jun 2021 21:35:16 +0000 (18:35 -0300)]
drm/doc: document drm_mode_get_plane
Add a small description and document struct fields of
drm_mode_get_plane.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611213516.77904-2-leandro.ribeiro@collabora.com
Thomas Zimmermann [Mon, 14 Jun 2021 04:56:22 +0000 (06:56 +0200)]
Merge tag 'tags/topic/i915-ttm-2021-06-11' into drm-misc-next
drm-misc and drm-intel pull request for topic/i915-ttm:
- Convert i915 lmem handling to ttm.
- Add a patch to temporarily add a driver_private member to vma_node.
- Use this to allow mixed object mmap handling for i915.
Thomas Zimmermann [Mon, 14 Jun 2021 04:55:50 +0000 (06:55 +0200)]
Merge drm/drm-next into drm-misc-next
Backmerge to prepare for i915-ttm topic branch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Zack Rusin [Wed, 9 Jun 2021 17:23:07 +0000 (13:23 -0400)]
drm/vmwgfx: Fix implicit declaration error
The declarations of ttm_range_man_init and ttm_range_man_fini
have been moved to ttm_range_manager.h so we have to add it
to the include list.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes:
3eb7d96e9415 ("drm/ttm: flip over the range manager to self allocated nodes")
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172307.131929-10-zackr@vmware.com
Zack Rusin [Wed, 9 Jun 2021 17:23:06 +0000 (13:23 -0400)]
drm/vmwgfx: Remove vmw_chipset
vmw_chipset was duplicating pci_id. They are exactly the same
variable just with two different names. Becuase pci_id was
already used to detect the SVGA version, there's no point
in having vmw_chipset and thus we can remove it.
All references to vmw_chipset should use pci_id.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172307.131929-9-zackr@vmware.com
Martin Krastev [Wed, 9 Jun 2021 17:23:05 +0000 (13:23 -0400)]
drm/vmwgfx: Refactor vmw_mksstat_remove_ioctl to expect pgid match with vmw_mksstat_add_ioctl to authorise removal.
Original vmw_mksstat_remove_ioctl expected pid to match the corresponding vmw_mksstat_add_ioctl.
That made impossible en-masse removals by one pid, which is a valid use case, so pid match was
discarded. Current change enforces a broader pgid match as a form of protection from arbitrary
processes interrupting an ongoing mks-guest-stats.
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Martin Krastev <krastevm@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172307.131929-8-zackr@vmware.com
Zack Rusin [Wed, 9 Jun 2021 17:23:04 +0000 (13:23 -0400)]
drm/vmwgfx: inline access to the pages from the piter
The indirection doesn't make sense because we always go through
the same function pointer. Instead of the extra indirection
lets inline the access to the current page.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172307.131929-7-zackr@vmware.com
Zack Rusin [Wed, 9 Jun 2021 17:23:03 +0000 (13:23 -0400)]
drm/vmwgfx: remove code that was using physical page addresses
This code has been unused for a while now. When the explicit checks
for whether the driver is running on top of non-coherent swiotlb
have been deprecated we lost the ability to fallback to physical
mappings. Instead of trying to readd a module parameter to force
usage of physical addresses it's better to just force coherent
TTM pages via the force_coherent module parameter making this
code pointless.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172307.131929-6-zackr@vmware.com
Zack Rusin [Wed, 9 Jun 2021 17:23:02 +0000 (13:23 -0400)]
drm/vmwgfx: Fix some static checker warnings
Fix some minor issues that Coverity spotted in the code. None
of that are serious but they're all valid concerns so fixing
them makes sense.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172307.131929-5-zackr@vmware.com
Zack Rusin [Wed, 9 Jun 2021 17:23:01 +0000 (13:23 -0400)]
drm/vmwgfx: Fix subresource updates with new contexts
The has_dx variable was only set during the initialization which
meant that UPDATE_SUBRESOURCE was never used. We were emulating it
with UPDATE_GB_IMAGE but that's always been a stop-gap. Instead
of has_dx which has been deprecated a long time ago we need to check
for whether shader model 4.0 or newer is available to the device.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172307.131929-4-zackr@vmware.com
Martin Krastev [Wed, 9 Jun 2021 17:23:00 +0000 (13:23 -0400)]
drm/vmwgfx: Introduce VMware mks-guest-stats
VMware mks-guest-stats mechanism allows the collection of performance stats from
guest userland GL contexts, as well as from vmwgfx kernelspace, via a set of sw-
defined performance counters. The userspace performance counters are (de)registerd
with vmware-vmx-stats hypervisor via new iocts. The vmwgfx kernelspace counters
are controlled at build-time via a new config DRM_VMWGFX_MKSSTATS.
* Add vmw_mksstat_{add|remove|reset}_ioctl controlling the tracking of
mks-guest-stats in guest winsys contexts
* Add DRM_VMWGFX_MKSSTATS config to drivers/gpu/drm/vmwgfx/Kconfig controlling
the instrumentation of vmwgfx for kernelspace mks-guest-stats counters
* Instrument vmwgfx vmw_execbuf_ioctl to collect mks-guest-stats according to
DRM_VMWGFX_MKSSTATS
Signed-off-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172307.131929-3-zackr@vmware.com
Zack Rusin [Wed, 9 Jun 2021 17:22:59 +0000 (13:22 -0400)]
drm/vmwgfx: Simplify devcaps code
Make devcaps code self-contained so that it's easier to cache
and operate on them.
As the number of devcaps got bigger the code dealing with them
got more and more tricky. Lets create a central place to deal
with all the complexity. This lets us remove the lock we used
to require to deal with register write races because we only
read the devcaps at initialization.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172307.131929-2-zackr@vmware.com
Douglas Anderson [Fri, 11 Jun 2021 17:17:47 +0000 (10:17 -0700)]
arm64: dts: qcom: sc7180-trogdor: Move panel under the bridge chip
Putting the panel under the bridge chip (under the aux-bus node)
allows the panel driver to get access to the DP AUX bus, enabling all
sorts of fabulous new features.
While we're at this, get rid of a level of hierarchy for the panel
node. It doesn't need "ports / port" and can just have a "port" child.
For Linux, this patch has a hard requirement on the patches adding DP
AUX bus support to the ti-sn65dsi86 bridge chip driver. See the patch
("drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus").
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.11.Ibdb7735fb1844561b902252215a69526a14f9abd@changeid
Douglas Anderson [Fri, 11 Jun 2021 17:17:46 +0000 (10:17 -0700)]
drm/bridge: ti-sn65dsi86: Improve probe errors with dev_err_probe()
As I was testing to make sure that the DEFER path worked well with my
patch series, I got tired of seeing this scary message in my logs just
because the panel needed to defer:
[drm:ti_sn_bridge_probe] *ERROR* could not find any panel node
Let's use dev_err_probe() which nicely quiets this error and also
simplifies the code a tiny bit. We'll also update other places in the
file which can use dev_err_probe().
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.10.I24bba069e63b1eea84443eef0c8535fd032a6311@changeid
Douglas Anderson [Fri, 11 Jun 2021 17:17:45 +0000 (10:17 -0700)]
drm/bridge: ti-sn65dsi86: Don't read EDID blob over DDC
This is really just a revert of commit
58074b08c04a ("drm/bridge:
ti-sn65dsi86: Read EDID blob over DDC"), resolving conflicts.
The old code failed to read the EDID properly in a very important
case: before the bridge's pre_enable() was called. The way things need
to work:
1. Read the EDID.
2. Based on the EDID, decide on video settings and pixel clock.
3. Enable the bridge w/ the desired settings.
The way things were working:
1. Try to read the EDID but fail; fall back to hardcoded values.
2. Based on hardcoded values, decide on video settings and pixel clock.
3. Enable the bridge w/ the desired settings.
4. Try again to read the EDID, it works now!
5. Realize that the hardcoded settings weren't quite right.
6. Disable / reenable the bridge w/ the right settings.
The reasons for the failures were twofold:
a) Since we never ran the bridge chip's pre-enable then we never set
the bit to ignore HPD. This meant the bridge chip didn't even _try_
to go out on the bus and communicate with the panel.
b) Even if we fixed things to ignore HPD, the EDID still wouldn't read
if the panel wasn't on.
Instead of reverting the code, we could fix it to set the HPD bit and
also power on the panel. However, it also works nicely to just let the
panel code read the EDID. Now that we've split the driver up we can
expose the DDC AUX channel bus to the panel node. The panel can take
charge of reading the EDID.
NOTE: in order for things to work, anyone that needs to read the EDID
will need to instantiate their panel using the new DP AUX bus (AKA by
listing their panel under the "aux-bus" node of the bridge chip in the
device tree).
In the future if we want to use the bridge chip to provide a full
external DP port (which won't have a panel) then we will have to
conditinally add EDID reading back in.
Suggested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.9.I9330684c25f65bb318eff57f0616500f83eac3cc@changeid
Douglas Anderson [Fri, 11 Jun 2021 17:17:44 +0000 (10:17 -0700)]
drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus
We want to provide our panel with access to the DP AUX channel. The
way to do this is to let our panel be a child of ours using the fancy
new DP AUX bus support.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.8.Ib5fe0638da85800141ce141bb8e441c5f25438d4@changeid
Douglas Anderson [Fri, 11 Jun 2021 17:17:43 +0000 (10:17 -0700)]
drm/bridge: ti-sn65dsi86: Promote the AUX channel to its own sub-dev
On its own, this change looks a little strange and doesn't do too much
useful. To understand why we're doing this we need to look forward to
future patches where we're going to probe our panel using the new DP
AUX bus. See the patch ("drm/bridge: ti-sn65dsi86: Add support for the
DP AUX bus").
Let's think about the set of steps we'll want to happen when we have
the DP AUX bus:
1. We'll create the DP AUX bus.
2. We'll populate the devices on the DP AUX bus (AKA our panel).
3. For setting up the bridge-related functions of ti-sn65dsi86 we'll
need to get a reference to the panel.
If we do #1 - #3 in a single probe call things _mostly_ will work, but
it won't be massively robust. Let's explore.
First let's think of the easy case of no -EPROBE_DEFER. In that case
in step #2 when we populate the devices on the DP AUX bus it will
actually try probing the panel right away. Since the panel probe
doesn't defer then in step #3 we'll get a reference to the panel and
we're golden.
Second, let's think of the case when the panel returns
-EPROBE_DEFER. In that case step #2 won't synchronously create the
panel (it'll just add the device to the defer list to do it
later). Step #3 will fail to get the panel and the bridge sub-device
will return -EPROBE_DEFER. We'll depopulate the DP AUX bus. Later
we'll try the whole sequence again. Presumably the panel will
eventually stop returning -EPROBE_DEFER and we'll go back to the first
case where things were golden. So this case is OK too even if it's a
bit ugly that we have to keep creating / deleting the AUX bus over and
over.
So where is the problem? As I said, it's mostly about robustness. I
don't believe that step #2 (creating the sub-devices) is really
guaranteed to be synchronous. This is evidenced by the fact that it's
allowed to "succeed" by just sticking the device on the deferred
list. If anything about the process changes in Linux as a whole and
step #2 just kicks off the probe of the DP AUX endpoints (our panel)
in the background then we'd be in trouble because we might never get
the panel in step #3.
Adding an extra sub-device means we just don't need to worry about
it. We'll create the sub-device for the DP AUX bus and it won't go
away until the whole ti-sn65dsi86 driver goes away. If the bridge
sub-device defers (maybe because it can't find the panel) that won't
depopulate the DP AUX bus and so we don't need to worry about it.
NOTE: there's a little bit of a trick here. Though the AUX channel can
run without the MIPI-to-eDP bits of the code, the MIPI-to-eDP bits
can't run without the AUX channel. We could come up a complicated
signaling scheme (have the MIPI-to-eDP bits return EPROBE_DEFER for a
while or wait on some sort of completion), but it seems simple enough
to just not even bother creating the bridge device until the AUX
channel probes. That's what we'll do.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.7.If89144992cb9d900f8c91a8d1817dbe00f543720@changeid
Douglas Anderson [Fri, 11 Jun 2021 17:17:42 +0000 (10:17 -0700)]
drm/panel: panel-simple: Stash DP AUX bus; allow using it for DDC
If panel-simple is instantiated as a DP AUX bus endpoint then we have
access to the DP AUX bus. Let's stash it in the panel-simple
structure, leaving it NULL for the cases where the panel is
instantiated in other ways.
If we happen to have access to the DP AUX bus and we weren't provided
the ddc-i2c-bus in some other manner, let's use the DP AUX bus for it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.6.I18e60221f6d048d14d6c50a770b15f356fa75092@changeid
Douglas Anderson [Fri, 11 Jun 2021 17:17:41 +0000 (10:17 -0700)]
drm/panel: panel-simple: Allow panel-simple be a DP AUX endpoint device
The panel-simple driver can already have devices instantiated as
platform devices or MIPI DSI devices. Let's add a 3rd way to
instantiate it: as DP AUX endpoint devices.
At the moment there is no benefit to instantiating it in this way,
but:
- In the next patch we'll give it access to the DDC channel via the DP
AUX bus.
- Possibly in the future we may use this channel to configure the
backlight.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.5.Iada41f76a7342354bae929d0bb3ceba40f27f0ea@changeid
Douglas Anderson [Fri, 11 Jun 2021 17:17:40 +0000 (10:17 -0700)]
drm: Introduce the DP AUX bus
Historically "simple" eDP panels have been handled by panel-simple
which is a basic platform_device. In the device tree, the panel node
was at the top level and not connected to anything else.
Let's change it so that, instead, panels can be represented as being
children of the "DP AUX bus". Essentially we're saying that the
hierarchy that we're going to represent is the "control" connections
between devices. The DP AUX bus is a control bus provided by an eDP
controller (the parent) and consumed by a device like a panel (the
child).
The primary incentive here is to cleanly provide the panel driver the
ability to communicate over the AUX bus while handling lifetime issues
properly. The panel driver may want the AUX bus for controlling the
backlight or querying the panel's EDID.
The idea for this bus's design was hashed out over IRC [1].
[1] https://people.freedesktop.org/~cbrill/dri-log/?channel=dri-devel&date=2021-05-11
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Rajeev Nandan <rajeevny@codeaurora.org>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.4.I787c9ba09ed5ce12500326ded73a4f7c9265b1b3@changeid
Douglas Anderson [Fri, 11 Jun 2021 17:17:39 +0000 (10:17 -0700)]
dt-bindings: drm/bridge: ti-sn65dsi86: Add aux-bus child
The patch ("dt-bindings: drm: Introduce the DP AUX bus") talks about
how using the DP AUX bus is better than learning how to slice
bread. Let's add it to the ti-sn65dsi86 bindings.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.3.I98bf729846c37c4c143f6ab88b1e299280e2fe26@changeid
Douglas Anderson [Fri, 11 Jun 2021 17:17:38 +0000 (10:17 -0700)]
dt-bindings: drm: Introduce the DP AUX bus
We want to be able to list an eDP panel as a child of an eDP
controller node to represent the fact that the panel is connected to
the controller's DP AUX bus. Though the panel and the controller are
connected in several ways, the DP AUX bus is the primary control
interface between the two and thus makes the most sense to model in
device tree hierarchy.
Listing a panel in this way makes it possible for the panel driver to
easily get access to the DP AUX bus that it resides on, which can be
useful to help in auto-detecting the panel and for turning on various
bits.
NOTE: historically eDP panels were _not_ listed under their controller
but were listed at the top level of the device tree. This will still
be supported for backward compatibility (and while DP controller
drivers are adapted to support the new DT syntax) but should be
considered deprecated since there is no downside to listing the panel
under the controller.
For now, the DP AUX bus bindings will only support an eDP panel
underneath. It's possible it could be extended to allow having a DP
connector under it in the future.
NOTE: there is no "Example" in this bindings file. Yikes! This avoids
duplicating the same example lots of places. See users of the aux bus
(like ti-sn65dsi86) for examples.
The idea for this bus's design was hashed out over IRC [1].
[1] https://people.freedesktop.org/~cbrill/dri-log/?channel=dri-devel&date=2021-05-11
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.2.Id3c048d22e72a9f90084a543b5b4e3f43bc9ab62@changeid
Douglas Anderson [Fri, 11 Jun 2021 17:17:37 +0000 (10:17 -0700)]
dt-bindings: display: simple: List hpd properties in panel-simple
The HPD (Hot Plug Detect) signal is present in many (probably even
"most") eDP panels. For eDP, this signal isn't actually used for
detecting hot-plugs of the panel but is more akin to a "panel ready"
signal. After you provide power to the panel, panel timing diagrams
typically say that you should wait for HPD to be asserted (or wait a
fixed amount of time) before talking to the panel.
The panel-simple bindings describes many eDP panels and many of these
panels provide the HPD signal. We should add the HPD-related
properties to the panel-simple bindings. The HPD properties are
actually defined in panel-common.yaml, so adding them here just
documents that they are OK for panels handled by the panel-simple
bindings.
NOTE: whether or not we'd include HPD properties in the panel node is
more a property of the board design than the panel itself. For most
boards using these eDP panels everything "magically" works without
specifying any HPD properties and that's been why we haven't needed to
allow the HPD properties earlier. On these boards the HPD signal goes
directly to a dedicated "HPD" input to the eDP controller and this
connection doesn't need to be described in the device tree. The only
time the HPD properties are needed in the device tree are if HPD is
hooked up to a GPIO or if HPD is normally on the panel but isn't used
on a given board. That means that if we don't allow the HPD properties
in panel-simple then one could argue that we've got to boot all eDP
panels (or at least all those that someone could conceivably put on a
system where HPD goes to a GPIO or isn't hooked up) from panel-simple.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.1.Ieb731d23680db4700cc41fe51ccc73ba0b785fb7@changeid
Wei Yongjun [Tue, 8 Jun 2021 14:38:56 +0000 (14:38 +0000)]
drm/panfrost: Fix missing clk_disable_unprepare() on error in panfrost_clk_init()
Fix the missing clk_disable_unprepare() before return
from panfrost_clk_init() in the error handling case.
Fixes:
b681af0bc1cc ("drm: panfrost: add optional bus_clock")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608143856.4154766-1-weiyongjun1@huawei.com
Maarten Lankhorst [Thu, 10 Jun 2021 07:01:52 +0000 (09:01 +0200)]
drm/i915: Use ttm mmap handling for ttm bo's.
Use the ttm handlers for servicing page faults, and vm_access.
We do our own validation of read-only access, otherwise use the
ttm handlers as much as possible.
Because the ttm handlers expect the vma_node at vma->base, we slightly
need to massage the mmap handlers to look at vma_node->driver_private
to fetch the bo, if it's NULL, we assume i915's normal mmap_offset uapi
is used.
This is the easiest way to achieve compatibility without changing ttm's
semantics.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610070152.572423-5-thomas.hellstrom@linux.intel.com
Maarten Lankhorst [Thu, 10 Jun 2021 07:01:51 +0000 (09:01 +0200)]
drm/vma: Add a driver_private member to vma_node.
This allows drivers to distinguish between different types of vma_node's.
The readonly flag was unused and is thus removed.
This is a temporary solution, until i915 is converted completely to
use ttm for bo's.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch> #irc
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610070152.572423-4-thomas.hellstrom@linux.intel.com
Thomas Hellström [Thu, 10 Jun 2021 07:01:50 +0000 (09:01 +0200)]
drm/i915/lmem: Verify checks for lmem residency
Since objects can be migrated or evicted when not pinned or locked,
update the checks for lmem residency or future residency so that
the value returned is not immediately stale.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610070152.572423-3-thomas.hellstrom@linux.intel.com
Thomas Hellström [Thu, 10 Jun 2021 07:01:49 +0000 (09:01 +0200)]
drm/i915/ttm: Introduce a TTM i915 gem object backend
Most logical place to introduce TTM buffer objects is as an i915
gem object backend. We need to add some ops to account for added
functionality like delayed delete and LRU list manipulation.
Initially we support only LMEM and SYSTEM memory, but SYSTEM
(which in this case means evicted LMEM objects) is not
visible to i915 GEM yet. The plan is to move the i915 gem system region
over to the TTM system memory type in upcoming patches.
We set up GPU bindings directly both from LMEM and from the system region,
as there is no need to use the legacy TTM_TT memory type. We reserve
that for future porting of GGTT bindings to TTM.
Remove the old lmem backend.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610070152.572423-2-thomas.hellstrom@linux.intel.com
Dave Airlie [Fri, 11 Jun 2021 04:19:06 +0000 (14:19 +1000)]
Merge tag 'exynos-drm-next-for-v5.14' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next
Two cleanups
- These patches make Exynos DRM driver to use pm_runtime_resume_and_get()
function instead of m_runtime_get_sync() to deal with usage counter.
pm_runtime_get_sync() increases the usage counter even when it failed,
which could make callers to forget to decrease the usage counter.
pm_runtime_resume_and_get() decreases the usage counter regardless of
whether it failed or not.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611025939.393282-1-inki.dae@samsung.com
Dave Airlie [Fri, 11 Jun 2021 03:34:42 +0000 (13:34 +1000)]
Merge tag 'drm-intel-gt-next-2021-06-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Disable mmap ioctl for gen12+ (excl. TGL-LP)
- Start enabling HuC loading by default for upcoming Gen12+
platforms (excludes TGL and RKL)
Core Changes:
- Backmerge of drm-next
Driver Changes:
- Revert "i915: use io_mapping_map_user" (Eero, Matt A)
- Initialize the TTM device and memory managers (Thomas)
- Major rework to the GuC submission backend to prepare
for enabling on new platforms (Michal Wa., Daniele,
Matt B, Rodrigo)
- Fix i915_sg_page_sizes to record dma segments rather
than physical pages (Thomas)
- Locking rework to prep for TTM conversion (Thomas)
- Replace IS_GEN and friends with GRAPHICS_VER (Lucas)
- Use DEVICE_ATTR_RO macro (Yue)
- Static code checker fixes (Zhihao)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YMHeDxg9VLiFtyn3@jlahtine-mobl.ger.corp.intel.com
Dave Airlie [Fri, 11 Jun 2021 02:50:47 +0000 (12:50 +1000)]
Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-next
- remove redundant NULL checks by various people
- fix sparse checker warnings from Marc
- expose more GPU ID values to userspace from Christian
- add HWDB entry for GPU found on i.MX8MP from Sascha
- rework of the linear window calculation to better deal with
systems with large regions of reserved RAM
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/f27e1ec2c2fea310bfb6fe6c99174a54e9dfba83.camel@pengutronix.de
Inki Dae [Tue, 25 May 2021 10:51:39 +0000 (19:51 +0900)]
drm/exynos: use pm_runtime_resume_and_get()
Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()
to deal with usage counter. pm_runtime_get_sync() increases the
usage counter even when it failed, which makes callers to forget
to decrease the usage counter and resulted in reference leak.
pm_runtime_resume_and_get() function decreases the usage counter
when it failed internally so it can avoid the reference leak.
Changelog v1:
- Fix an build error reported by kernel test robot of Intel.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reported-by: kernel test robot <lkp@intel.com>
Tian Tao [Mon, 24 May 2021 12:07:57 +0000 (20:07 +0800)]
drm/exynos: Use pm_runtime_resume_and_get() to replace open coding
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle to avoid continuing to increase the refcount
when pm_runtime_get_sync fails.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Linus Walleij [Thu, 10 Jun 2021 22:05:27 +0000 (00:05 +0200)]
drm/panel: db7430: Add driver for Samsung DB7430
This adds a new driver for the Samsung DB7430 DPI display
controller as controlled over SPI.
Right now the only panel product we know that is using this
display controller is the LMS397KF04 but there may be more.
This is the first regular panel driver making use of the
MIPI DBI helper library. The DBI "device" portions can not
be used because that code assumes the use of a single
regulator and specific timings around the reset pulse that
do not match the DB7430 datasheet.
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Doug Anderson <dianders@chromium.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610220527.366432-1-linus.walleij@linaro.org
Leandro Ribeiro [Wed, 9 Jun 2021 23:00:38 +0000 (20:00 -0300)]
drm/doc: document how userspace should find out CRTC index
In this patch we add a section to document what userspace should do to
find out the CRTC index. This is important as they may be many places in
the documentation that need this, so it's better to just point to this
section and avoid repetition.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609230039.73307-2-leandro.ribeiro@collabora.com
Sascha Hauer [Fri, 19 Mar 2021 19:02:02 +0000 (20:02 +0100)]
drm/etnaviv: add HWDB entry for GC7000 rev 6204
This is the 3D GPU found on the i.MX8MP SoC. The feature bits are
taken from the NXP downstream kernel driver 6.4.3.p1.305572.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Thomas Zimmermann [Thu, 10 Jun 2021 10:18:54 +0000 (12:18 +0200)]
Merge drm/drm-next into drm-misc-next
Backmerging to pick up the latest TTM patches plus conflict resolution.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Christian König [Wed, 9 Jun 2021 17:25:56 +0000 (19:25 +0200)]
drm/nouveau: init the base GEM fields for internal BOs
TTMs buffer objects are based on GEM objects for quite a while
and rely on initializing those fields before initializing the TTM BO.
Nouveau now doesn't init the GEM object for internally allocated BOs,
so make sure that we at least initialize some necessary fields.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172902.1937-1-christian.koenig@amd.com
Vivek Kasireddy [Wed, 9 Jun 2021 18:29:15 +0000 (11:29 -0700)]
udmabuf: Add support for mapping hugepages (v4)
If the VMM's (Qemu) memory backend is backed up by memfd + Hugepages
(hugetlbfs and not THP), we have to first find the hugepage(s) where
the Guest allocations are located and then extract the regular 4k
sized subpages from them.
v2: Ensure that the subpage and hugepage offsets are calculated correctly
when the range of subpage allocations cuts across multiple hugepages.
v3: Instead of repeatedly looking up the hugepage for each subpage,
only do it when the subpage allocation crosses over into a different
hugepage. (suggested by Gerd and DW)
v4: Fix the following warning identified by checkpatch:
CHECK:OPEN_ENDED_LINE: Lines should not end with a '('
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210609182915.592743-1-vivek.kasireddy@intel.com
[ kraxel: one more checkpatch format tweak ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Dave Airlie [Thu, 10 Jun 2021 03:47:12 +0000 (13:47 +1000)]
Merge tag 'amd-drm-next-5.14-2021-06-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.14-2021-06-09:
amdgpu:
- SR-IOV fixes
- Smartshift updates
- GPUVM TLB flush updates
- 16bpc fixed point display fix for DCE11
- BACO cleanups and core refactoring
- Aldebaran updates
- Initial Yellow Carp support
- RAS fixes
- PM API cleanup
- DC visual confirm updates
- DC DP MST fixes
- DC DML fixes
- Misc code cleanups and bug fixes
amdkfd:
- Initial Yellow Carp support
radeon:
- memcpy_to/from_io fixes
UAPI:
- Add Yellow Carp chip family id
Used internally in the kernel driver and by mesa
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610031649.4006-1-alexander.deucher@amd.com
Dave Airlie [Thu, 10 Jun 2021 03:37:07 +0000 (13:37 +1000)]
Merge tag 'drm-intel-next-2021-06-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Cross-subsystem Changes:
- x86/gpu: add JasperLake to gen11 early quirks
(Although the patch lacks the Ack info, it has been Acked by Borislav)
Driver Changes:
- General DMC improves (Anusha)
- More ADL-P enabling (Vandita, Matt, Jose, Mika, Anusha, Imre, Lucas, Jani, Manasi, Ville, Stanislav)
- Introduce MBUS relative dbuf offset (Ville)
- PSR fixes and improvements (Gwan, Jose, Ville)
- Re-enable LTTPR non-transparent LT mode for DPCD_REV < 1.4 (Ville)
- Remove duplicated declarations (Shaokun, Wan)
- Check HDMI sink deep color capabilities during .mode_valid (Ville)
- Fix display flicker screan related to console and FBC (Chris)
- Remaining conversions of GRAPHICS_VER (Lucas)
- Drop invalid FIXME (Jose)
- Fix bigjoiner check in dsc_disable (Vandita)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YMEy2Ew82BeL/hDK@intel.com
Dave Airlie [Thu, 10 Jun 2021 02:59:00 +0000 (12:59 +1000)]
drm/amdgpu: use correct rounding macro for 64-bit
This fixes 32-bit arm build due to lack of 64-bit divides.
Fixes:
cb1c81467af3 ("drm/ttm: flip the switch for driver allocated resources v2")
Link: https://patchwork.freedesktop.org/patch/438442/
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 7 Jun 2021 20:19:46 +0000 (16:19 -0400)]
drm/amdgpu/vcn: drop gfxoff control for VCN2+
Drop disabling of gfxoff during VCN use. This allows gfxoff
to kick in and potentially save power if the user is not using
gfx for color space conversion or scaling.
VCN1.0 had a bug which prevented it from working properly with
gfxoff, so we disabled it while using VCN. That said, most apps
today use gfx for scaling and color space conversion rather than
overlay planes so it was generally in use anyway. This was fixed
on VCN2+, but since we mostly use gfx for color space conversion
and scaling and rapidly powering up/down gfx can negate the
advantages of gfxoff, we left gfxoff disabled. As more
applications use overlay planes for color space conversion
and scaling, this starts to be a win, so go ahead and leave
gfxoff enabled.
Note that VCN1.0 uses vcn_v1_0_idle_work_handler() and
vcn_v1_0_ring_begin_use() so they are not affected by this
patch.
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Thu, 10 Jun 2021 01:03:50 +0000 (11:03 +1000)]
Merge tag 'drm-misc-next-2021-06-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.14:
UAPI Changes:
* drm/panfrost: Export AFBC_FEATURES register to userspace
Cross-subsystem Changes:
* dma-buf: Fix debug printing; Rename dma_resv_*() functions + changes
in callers; Cleanups
Core Changes:
* Add prefetching memcpy for WC
* Avoid circular dependency on CONFIG_FB
* Cleanups
* Documentation fixes throughout DRM
* ttm: Make struct ttm_resource the base of all managers + changes
in all users of TTM; Add a generic memcpy for page-based iomem; Remove
use of VM_MIXEDMAP; Cleanups
Driver Changes:
* drm/bridge: Add TI SN65DSI83 and SN65DSI84 + DT bindings
* drm/hyperv: Add DRM driver for HyperV graphics output
* drm/msm: Fix module dependencies
* drm/panel: KD53T133: Support rotation
* drm/pl111: Fix module dependencies
* drm/qxl: Fixes
* drm/stm: Cleanups
* drm/sun4i: Be explicit about format modifiers
* drm/vc4: Use struct gpio_desc; Cleanups
* drm/vgem: Cleanups
* drm/vmwgfx: Use ttm_bo_move_null() if there's nothing to copy
* fbdev/mach64: Cleanups
* fbdev/mb862xx: Use DEVICE_ATTR_RO
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YMBw3DF2b9udByfT@linux-uq9g
John Harrison [Thu, 3 Jun 2021 16:48:12 +0000 (09:48 -0700)]
drm/i915/uc: Use platform specific defaults for GuC/HuC enabling
The meaning of 'default' for the enable_guc module parameter has been
updated to accurately reflect what is supported on current platforms.
So start using the defaults instead of forcing everything off.
Although, note that right now, the default is for everything to be off
anyway. So this is not a change for current platforms.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603164812.19045-2-matthew.brost@intel.com
Lyude Paul [Fri, 14 May 2021 18:15:03 +0000 (14:15 -0400)]
drm/nouveau/kms/nv50-: Add basic DPCD backlight support for nouveau
This adds support for controlling panel backlights over eDP using VESA's
standard backlight control interface. Luckily, Nvidia was cool enough to
never come up with their own proprietary backlight control interface (at
least, not any that I or the laptop manufacturers I've talked to are aware
of), so this should work for any laptop panels which support the VESA
backlight control interface.
Note that we don't yet provide the panel backlight frequency to the DRM DP
backlight helpers. This should be fine for the time being, since it's not
required to get basic backlight controls working.
For reference: there's some mentions of PWM backlight values in
nouveau_reg.h, but I'm not sure these are the values we would want to use.
If we figure out how to get this information in the future, we'll have the
benefit of more granular backlight control.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: greg.depoire@gmail.com
Link: https://patchwork.freedesktop.org/patch/msgid/20210514181504.565252-10-lyude@redhat.com
Lyude Paul [Fri, 14 May 2021 18:15:02 +0000 (14:15 -0400)]
drm/dp: Extract i915's eDP backlight code into DRM helpers
Since we're about to implement eDP backlight support in nouveau using the
standard protocol from VESA, we might as well just take the code that's
already written for this and move it into a set of shared DRM helpers.
Note that these helpers are intended to handle DPCD related backlight
control bits such as setting the brightness level over AUX, probing the
backlight's TCON, enabling/disabling the backlight over AUX if supported,
etc. Any PWM-related portions of backlight control are explicitly left up
to the driver, as these will vary from platform to platform.
The only exception to this is the calculation of the PWM frequency
pre-divider value. This is because the only platform-specific information
required for this is the PWM frequency of the panel, which the driver is
expected to provide if available. The actual algorithm for calculating this
value is standard and is defined in the eDP specification from VESA.
Note that these helpers do not yet implement the full range of features
the VESA backlight interface provides, and only provide the following
functionality (all of which was already present in i915's DPCD backlight
support):
* Basic control of brightness levels
* Basic probing of backlight capabilities
* Helpers for enabling and disabling the backlight
v3:
* Split out changes to i915's backlight code to separate patches to make it
easier to review
v4:
* Style/spelling changes from Thomas Zimmermann
v5:
* Start using new drm_dbg_*() functions
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: greg.depoire@gmail.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514181504.565252-9-lyude@redhat.com
Lyude Paul [Fri, 14 May 2021 18:15:01 +0000 (14:15 -0400)]
drm/i915/dpcd_bl: Print return codes for VESA backlight failures
Also, stop printing the DPCD register that failed, and just describe it
instead. Saves us from having to look up each register offset when reading
through kernel logs (plus, DPCD dumping with drm.debug |= 0x100 will give
us that anyway).
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514181504.565252-8-lyude@redhat.com
Lyude Paul [Fri, 14 May 2021 18:15:00 +0000 (14:15 -0400)]
drm/i915/dpcd_bl: Return early in vesa_calc_max_backlight if we can't read PWMGEN_BIT_COUNT
If we can't read DP_EDP_PWMGEN_BIT_COUNT in
intel_dp_aux_vesa_calc_max_backlight() but do have a valid PWM frequency
defined in the VBT, we'll keep going in the function until we inevitably
fail on reading DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN. There's not much point in
doing this, so just return early.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514181504.565252-7-lyude@redhat.com
Lyude Paul [Fri, 14 May 2021 18:14:59 +0000 (14:14 -0400)]
drm/i915/dpcd_bl: Move VESA backlight enabling code closer together
No functional changes, just move set_vesa_backlight_enable() closer to it's
only caller: intel_dp_aux_vesa_enable_backlight().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514181504.565252-6-lyude@redhat.com
Lyude Paul [Fri, 14 May 2021 18:14:58 +0000 (14:14 -0400)]
drm/i915/dpcd_bl: Cache some backlight capabilities in intel_panel.backlight
Since we're about to be moving this code into shared DRM helpers, we might
as well start to cache certain backlight capabilities that can be
determined from the EDP DPCD, and are likely to be relevant to the majority
of drivers using said helpers. The main purpose of this is just to prevent
every driver from having to check everything against the eDP DPCD using DP
macros, which makes the code slightly easier to read (especially since the
names of some of the eDP capabilities don't exactly match up with what we
actually need to use them for, like DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT
for instance).
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514181504.565252-5-lyude@redhat.com
Lyude Paul [Fri, 14 May 2021 18:14:57 +0000 (14:14 -0400)]
drm/i915/dpcd_bl: Cleanup intel_dp_aux_vesa_enable_backlight() a bit
Get rid of the extraneous switch case in here, and just open code
edp_backlight_mode as we only ever use it once.
v4:
* Check that backlight mode is DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD, not
DP_EDP_BACKLIGHT_CONTROL_MODE_MASK - imirkin
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514181504.565252-4-lyude@redhat.com
Lyude Paul [Fri, 14 May 2021 18:14:56 +0000 (14:14 -0400)]
drm/i915/dpcd_bl: Handle drm_dpcd_read/write() return values correctly
This is kind of an annoying aspect of DRM's DP helpers:
drm_dp_dpcd_readb/writeb() return the size of bytes read/written on
success, thus we want to check against that instead of checking if the
return value is less than 0.
I'll probably be fixing this in the near future once I start doing DP work
again, also because I'd rather not mix a tree-wide refactor like that in
with a patch series intended to be around introducing DP backlight helpers.
So, for now let's just handle the return values from each function
correctly.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514181504.565252-3-lyude@redhat.com
Lyude Paul [Fri, 14 May 2021 18:14:55 +0000 (14:14 -0400)]
drm/i915/dpcd_bl: Remove redundant AUX backlight frequency calculations
Noticed this while moving all of the VESA backlight code in i915 over to
DRM helpers: it would appear that we calculate the frequency value we want
to write to DP_EDP_BACKLIGHT_FREQ_SET twice even though this value never
actually changes during runtime. So, let's simplify things by just caching
this value in intel_panel.backlight, and re-writing it as-needed.
Changes since v1:
* Wrap panel->backlight.edp.vesa.pwm_freq_pre_divider in
DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP check - Jani
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: greg.depoire@gmail.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514181504.565252-2-lyude@redhat.com
Stanislav Lisovskiy [Thu, 27 May 2021 11:01:06 +0000 (14:01 +0300)]
drm/i915/adl_p: Same slices mask is not same Dbuf state
We currently treat same slice mask as a same DBuf state and skip
updating the Dbuf slices, if we detect that.
This is wrong as if we have a multi to single pipe change or
vice versa, that would be treated as a same Dbuf state and thus
no changes required, so we don't get Mbus updated, causing issues.
Solution: check also mbus_join, in addition to slices mask.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210527110106.21434-1-stanislav.lisovskiy@intel.com
Stanislav Lisovskiy [Thu, 3 Jun 2021 06:50:38 +0000 (09:50 +0300)]
drm/i915/adl_p: CDCLK crawl support for ADL
CDCLK crawl feature allows to change CDCLK frequency
without disabling the actual PLL and doesn't require
a full modeset.
v2: - Added has_cdclk_crawl as a feature flag to
intel_device_info(Matt Roper)
- s/gen13_cdclk_pll_crawl/adlp_cdclk_pll_crawl/
(Matt Roper)
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603065038.7298-1-stanislav.lisovskiy@intel.com
Marek Vasut [Tue, 8 Jun 2021 14:22:11 +0000 (16:22 +0200)]
drm/bridge: ti-sn65dsi83: Fix sparse warnings
Fix the following sparse warnings generated by "make C=1":
drivers/gpu/drm/bridge/ti-sn65dsi83.c:429:13: warning: incorrect type in assignment (different base types)
drivers/gpu/drm/bridge/ti-sn65dsi83.c:429:13: expected unsigned short [assigned] [usertype] val
drivers/gpu/drm/bridge/ti-sn65dsi83.c:429:13: got restricted __le16 [usertype]
drivers/gpu/drm/bridge/ti-sn65dsi83.c:432:13: warning: incorrect type in assignment (different base types)
drivers/gpu/drm/bridge/ti-sn65dsi83.c:432:13: expected unsigned short [addressable] [assigned] [usertype] val
drivers/gpu/drm/bridge/ti-sn65dsi83.c:432:13: got restricted __le16 [usertype]
drivers/gpu/drm/bridge/ti-sn65dsi83.c:436:13: warning: incorrect type in assignment (different base types)
drivers/gpu/drm/bridge/ti-sn65dsi83.c:436:13: expected unsigned short [addressable] [assigned] [usertype] val
drivers/gpu/drm/bridge/ti-sn65dsi83.c:436:13: got restricted __le16 [usertype]
drivers/gpu/drm/bridge/ti-sn65dsi83.c:438:13: warning: incorrect type in assignment (different base types)
drivers/gpu/drm/bridge/ti-sn65dsi83.c:438:13: expected unsigned short [addressable] [assigned] [usertype] val
drivers/gpu/drm/bridge/ti-sn65dsi83.c:438:13: got restricted __le16 [usertype]
drivers/gpu/drm/bridge/ti-sn65dsi83.c:441:13: warning: incorrect type in assignment (different base types)
drivers/gpu/drm/bridge/ti-sn65dsi83.c:441:13: expected unsigned short [addressable] [assigned] [usertype] val
drivers/gpu/drm/bridge/ti-sn65dsi83.c:441:13: got restricted __le16 [usertype]
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Adam Ford <aford173@gmail.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Marek Vasut <marex@denx.de>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Valentin Raevsky <valentin@compulab.co.il>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608142211.82333-1-marex@denx.de
Vandita Kulkarni [Wed, 9 Jun 2021 06:59:14 +0000 (12:29 +0530)]
drm/i915/dsc: Fix bigjoiner check in dsc_disable
This change takes care of resetting the dss_ctl registers
in case of dsc_disable, bigjoiner disable and also
uncompressed joiner disable.
v2: Fix formatting
v3: Fix the typo (Mansi)
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Fixes:
d961eb20adb6 ("drm/i915/bigjoiner: atomic commit changes for uncompressed joiner")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3537
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609065914.4454-1-vandita.kulkarni@intel.com
Nirmoy Das [Tue, 8 Jun 2021 18:13:06 +0000 (20:13 +0200)]
drm/vmwgfx: use ttm_bo_move_null() when there is nothing to move
Use ttm_bo_move_null() instead of ttm_bo_assign_mem().
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608181306.90008-1-nirmoy.das@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Colin Ian King [Tue, 8 Jun 2021 16:13:13 +0000 (17:13 +0100)]
drm: qxl: ensure surf.data is ininitialized
The object surf is not fully initialized and the uninitialized
field surf.data is being copied by the call to qxl_bo_create
via the call to qxl_gem_object_create. Set surf.data to zero
to ensure garbage data from the stack is not being copied.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes:
f64122c1f6ad ("drm: add new QXL driver. (v1.4)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210608161313.161922-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Ville Syrjälä [Tue, 8 Jun 2021 08:54:15 +0000 (11:54 +0300)]
drm/i915: Disable PSR around cdclk changes
AUX logic is often clocked from cdclk. Disable PSR to make sure
there are no hw initiated AUX transactions in flight while we
change the cdclk frequency.
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608085415.515342-2-gwan-gyeong.mun@intel.com
Gwan-gyeong Mun [Tue, 8 Jun 2021 08:54:14 +0000 (11:54 +0300)]
drm/i915/display: Introduce new intel_psr_pause/resume function
This introduces the following function that can exit and activate a psr
source when intel_psr is already enabled.
- intel_psr_pause(): Pause current PSR. It deactivates current psr state.
- intel_psr_resume(): Resume paused PSR. It activates paused psr state.
v2: Address Jose's review comment.
- Remove unneeded changes around the intel_psr_enable().
- Add intel_psr_post_exit() which processes waiting until PSR is idle
and WA for SelectiveFetch.
v3: Address Jose's review comment.
- Rename intel_psr_post_exit() to intel_psr_wait_exit_locked().
- Move WA_1408330847 to intel_psr_disable_locked()
- If the PSR is paused by an explicit intel_psr_paused() call, make the
intel_psr_flush() not to activate PSR.
v4: Address Jose's review comment.
- In order to avoid the scenario of PSR is not active but there is a
scheduled psr->work, it changes the check routine of intel_psr_pause()
for PSR's enablement from "psr->active" to "psr->enable".
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608085415.515342-1-gwan-gyeong.mun@intel.com
Marek Vasut [Mon, 7 Jun 2021 17:24:57 +0000 (19:24 +0200)]
drm/stm: Remove usage of drm_display_mode_to_videomode()
There is not much value in the extra conversion step, the calculations
required for the LTDC IP are different than what is used in the
drm_display_mode_to_videomode(), so just do the right ones in the LTDC
driver right away.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Antonio Borneo <antonio.borneo@foss.st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Philippe Cornu <philippe.cornu@foss.st.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Vincent Abriou <vincent.abriou@foss.st.com>
Cc: Yannick Fertre <yannick.fertre@foss.st.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: dri-devel@lists.freedesktop.org
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210607172457.14471-1-marex@denx.de
Rohit Khaire [Tue, 8 Jun 2021 14:19:18 +0000 (10:19 -0400)]
drm/amdgpu: Use PSP to program IH_RB_CNTL_RING1/2 on SRIOV
This is similar to IH_RB_CNTL programming in
navi10_ih_toggle_ring_interrupts
Signed-off-by: Rohit Khaire <rohit.khaire@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 31 May 2021 22:33:12 +0000 (18:33 -0400)]
drm/amd/display: 3.2.139
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wyatt Wood [Mon, 31 May 2021 13:47:59 +0000 (09:47 -0400)]
drm/amd/display: [FW Promotion] Release 0.0.69
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Po-Ting Chen [Wed, 5 May 2021 12:46:36 +0000 (20:46 +0800)]
drm/amd/display: Add swizzle visual confirm mode
[Why]
To support a new visual confirm mode: swizzle to show the specific
color at the screen border according to different surface swizzle mode.
Currently we only support the Linear mode with red color.
Signed-off-by: Po-Ting Chen <robin.chen@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dingchen (David) Zhang [Mon, 31 May 2021 14:24:53 +0000 (10:24 -0400)]
drm/amd/display: force CP to DESIRED when removing display
[WHY]
- Commit from userspace could cause link stream to disable and hdcp
auth to reset when the HDCP has already been enabled at the moment.
CP should fall back to DESIRED from ENABLED in such cases.
- This change was previously reverted due to a regression caused, which
has now been cleared.
[HOW]
In hdcp display removal, change CP to DESIRED if at the moment CP
is ENABLED before the auth reset and removal of linked list element.
Signed-off-by: Dingchen (David) Zhang <dingchen.zhang@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Wed, 26 May 2021 19:22:51 +0000 (15:22 -0400)]
drm/amd/display: Updates for ODM Transition Test
[Why]
There is an assert in cases where transition from ODM 2:1
to ODM 1:1 (bypass)
[How]
Remove assert since this case is now valid.
Update diags tests for ODM transitions.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roy Chan [Thu, 20 May 2021 20:20:39 +0000 (16:20 -0400)]
drm/amd/display: Revert "Disconnect non-DP with no EDID"
[Why]
Found a use case (IPKVM) that DP-VGA active dongle does
not return any EDID and the mentioned commit broke it.
[How]
This reverts "Disconnect non-DP with no EDID"
Signed-off-by: Roy Chan <roy.chan@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fangzhi Zuo [Wed, 26 May 2021 00:39:12 +0000 (20:39 -0400)]
drm/amd/display: Add debugfs entry for dsc passthrough
[Why & How]
Add debugfs entry to force dsc decoding at PCON when DSC capable
external RX is connected. In such case, it is free to test DSC
decoding at external RX or at PCON.
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Tue, 25 May 2021 19:33:51 +0000 (15:33 -0400)]
drm/amd/display: Fix crash during MPO + ODM combine mode recalculation
[Why]
When calculating recout width for an MPO plane on a mode that's using
ODM combine, driver can calculate a negative value, resulting in a
crash.
[How]
For negative widths, use zero such that validation will prune the
configuration correctly and disallow MPO.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wesley Chalmers [Wed, 28 Apr 2021 22:38:54 +0000 (18:38 -0400)]
drm/amd/display: Fix off-by-one error in DML
[WHY]
For DCN30 and later, there is no data in DML arrays indexed by state at
index num_states.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wesley Chalmers [Thu, 20 May 2021 16:12:48 +0000 (12:12 -0400)]
drm/amd/display: Set DISPCLK_MAX_ERRDET_CYCLES to 7
[WHY]
DISPCLK_MAX_ERRDET_CYCLES must be 7 to prevent connection loss when
changing DENTIST_DISPCLK_WDIVIDER from 126 to 127 and back.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wesley Chalmers [Thu, 6 May 2021 21:16:00 +0000 (17:16 -0400)]
drm/amd/display: Add interface for ADD & DROP PIXEL Registers
[WHY]
HW has handed down a new sequence that requires access to these
registers.
v2: squash in DCN3.1 fixes (Alex)
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wesley Chalmers [Thu, 6 May 2021 18:51:20 +0000 (14:51 -0400)]
drm/amd/display: Add Interface to set FIFO ERRDET SW Override
[WHY]
HW has handed down a new sequence which requires access to the FIFO
ERRDET SW Override register.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 24 May 2021 22:13:31 +0000 (18:13 -0400)]
drm/amd/display: 3.2.138
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Sat, 22 May 2021 23:45:46 +0000 (19:45 -0400)]
drm/amd/display: [FW Promotion] Release 0.0.68
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Fri, 21 May 2021 22:06:36 +0000 (18:06 -0400)]
drm/amd/display: Change default policy for MPO with multidisplay
[Why]
Rearranging pipes with multiple displays and multiple planes cannot be
done atomically and requires a much improved sequence to deal with it.
[How]
To workaround such issues, prefer avoid pipe-split policy for
multidisplay scenarios.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vladimir Stempen [Wed, 19 May 2021 17:55:46 +0000 (13:55 -0400)]
drm/amd/display: Release MST resources on switch from MST to SST
[why]
When OS overrides training link training parameters
for MST device to SST mode, MST resources are not
released and leak of the resource may result crash and
incorrect MST discovery during following hot plugs.
[how]
Retaining sink object to be reused by SST link and
releasing MST resources.
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mikita Lipski [Wed, 19 May 2021 21:32:16 +0000 (17:32 -0400)]
drm/amd/display: Enable PSR Residency for multiple panels
[why]
Allow specifying which panel to take PSR Residency
measurements from.
[how]
Pass panel instance to DMUB through GPINT in the upper
8 bits of the parameter.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jayendran Ramani [Tue, 4 May 2021 17:41:18 +0000 (13:41 -0400)]
drm/amd/display: Return last used DRR VTOTAL from DC
[How]
Add call to get the last used VTOTAL from DC
Signed-off-by: Jayendran Ramani <Jayendran.Ramani@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Meenakshikumar Somasundaram [Fri, 30 Apr 2021 23:02:33 +0000 (19:02 -0400)]
drm/amd/display: Remove unused definition of DMUB SET_CONFIG
[Why & How]
SET_CONFIG transactions with DMUB is not used and removed.
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Fri, 21 May 2021 14:20:25 +0000 (10:20 -0400)]
drm/amd/display: Update scaling settings on modeset
[Why]
We update scaling settings when scaling mode has been changed.
However when changing mode from native resolution the scaling mode previously
set gets ignored.
[How]
Perform scaling settings update on modeset.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jimmy Kizito [Wed, 21 Apr 2021 14:34:34 +0000 (10:34 -0400)]
drm/amd/display: Support mappable encoders when transmitting training patterns.
[Why & How]
Add support for transmitting training pattern sequences for links whose
encoders have been dynamically assigned.
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jimmy Kizito [Mon, 19 Apr 2021 19:12:01 +0000 (15:12 -0400)]
drm/amd/display: Expand DP module equalization API.
[Why & How]
Add functionality useful for DP equalization phase of link training to
public interface.
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ilya Bakoulin [Tue, 18 May 2021 21:55:17 +0000 (17:55 -0400)]
drm/amd/display: Revert "Fix clock table filling logic"
[Why]
This change was found to break some high-refresh modes. Reverting
to unblock mainline.
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evgenii Krasnikov [Fri, 30 Apr 2021 15:00:59 +0000 (11:00 -0400)]
drm/amd/display: add visual confirm colors to differentiate layer_index > 0
[WHY]
Currently there is no way to visually identify if there is one or more
layers presented fullscreen on the display
[HOW]
Add new visual confirm colors in get_surface_visual_confirm_color for
planes with layer_index > 0
Signed-off-by: Evgenii Krasnikov <Evgenii.Krasnikov@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wyatt Wood [Thu, 6 May 2021 20:11:16 +0000 (16:11 -0400)]
drm/amd/display: Refactor visual confirm
[Why + How]
Visual confirm has no asic-specific logic,
so we can refactor and unify these functions
that are currently spread out across multiple
dcn files.
Add a new hw sequencer interface update_visual_confirm_color,
and a new mpc function pointer set_bg_color.
This will allow visual confirm to updated independently
of MPCC blending updates.
v2: squash in DCN3.1 fixes
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>