git.osdn.net Git - android-x86/kernel.git/log

BACKPORT: mm: Implement stack frame object validation

This creates per-architecture function arch_within_stack_frames() that
should validate if a given object is contained by a kernel stack frame.
Initial implementation is on x86.

This is based on code from PaX.

Signed-off-by: Kees Cook <keescook@chromium.org>
Change-Id: I1f3b299bb8991d65dcdac6af85d633d4b7776df1
(cherry picked from commit 0f60a8efe4005ab5e65ce000724b04d4ca04a199)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>

UPSTREAM: mm: Add is_migrate_cma_page

Code such as hardened user copy[1] needs a way to tell if a
page is CMA or not. Add is_migrate_cma_page in a similar way
to is_migrate_isolate_page.

[1]http://article.gmane.org/gmane.linux.kernel.mm/155238

Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Change-Id: I1f9aa13d8d063038fa70b93282a836648fbb4f6d
(cherry picked from commit 7c15d9bb8231f998ae7dc0b72415f5215459f7fb)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>

UPSTREAM: unsafe_[get|put]_user: change interface to use a error target label

When I initially added the unsafe_[get|put]_user() helpers in commit
5b24a7a2aa20 ("Add 'unsafe' user access functions for batched
accesses"), I made the mistake of modeling the interface on our
traditional __[get|put]_user() functions, which return zero on success,
or -EFAULT on failure.

That interface is fairly easy to use, but it's actually fairly nasty for
good code generation, since it essentially forces the caller to check
the error value for each access.

In particular, since the error handling is already internally
implemented with an exception handler, and we already use "asm goto" for
various other things, we could fairly easily make the error cases just
jump directly to an error label instead, and avoid the need for explicit
checking after each operation.

So switch the interface to pass in an error label, rather than checking
the error value in the caller.  Best do it now before we start growing
more users (the signal handling code in particular would be a good place
to use the new interface).

So rather than

if (unsafe_get_user(x, ptr))
... handle error ..

the interface is now

unsafe_get_user(x, ptr, label);

where an error during the user mode fetch will now just cause a jump to
'label' in the caller.

Right now the actual _implementation_ of this all still ends up being a
"if (err) goto label", and does not take advantage of any exception
label tricks, but for "unsafe_put_user()" in particular it should be
fairly straightforward to convert to using the exception table model.

Note that "unsafe_get_user()" is much harder to convert to a clever
exception table model, because current versions of gcc do not allow the
use of "asm goto" (for the exception) with output values (for the actual
value to be fetched).  But that is hopefully not a limitation in the
long term.

[ Also note that it might be a good idea to switch unsafe_get_user() to
  actually _return_ the value it fetches from user space, but this
  commit only changes the error handling semantics ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change-Id: Ib905a84a04d46984320f6fd1056da4d72f3d6b53
(cherry picked from commit 1bd4403d86a1c06cb6cc9ac87664a0c9d3413d51)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>

BACKPORT: arm64: mm: fix location of _etext

As Kees Cook notes in the ARM counterpart of this patch [0]:

  The _etext position is defined to be the end of the kernel text code,
  and should not include any part of the data segments. This interferes
  with things that might check memory ranges and expect executable code
  up to _etext.

In particular, Kees is referring to the HARDENED_USERCOPY patch set [1],
which rejects attempts to call copy_to_user() on kernel ranges containing
executable code, but does allow access to the .rodata segment. Regardless
of whether one may or may not agree with the distinction, it makes sense
for _etext to have the same meaning across architectures.

So let's put _etext where it belongs, between .text and .rodata, and fix
up existing references to use __init_begin instead, which unlike _end_rodata
includes the exception and notes sections as well.

The _etext references in kaslr.c are left untouched, since its references
to [_stext, _etext) are meant to capture potential jump instruction targets,
and so disregarding .rodata is actually an improvement here.

[0] http://article.gmane.org/gmane.linux.kernel/2245084
[1] http://thread.gmane.org/gmane.linux.kernel.hardened.devel/2502

Reported-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change-Id: I8f6582525217b9ca324f6a382ea52d30ce1d0dbd
(cherry picked from commit 9fdc14c55cd6579d619ccd9d40982e0805e62b6d)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>

BACKPORT: ARM: 8583/1: mm: fix location of _etext

The _etext position is defined to be the end of the kernel text code,
and should not include any part of the data segments. This interferes
with things that might check memory ranges and expect executable code
up to _etext. Just to be conservative, leave the kernel resource as
it was, using __init_begin instead of _etext as the end mark.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Change-Id: Ida514d1359dbe6f782f562ce29b4ba09ae72bfc0
(cherry picked from commit 14c4a533e0996f95a0a64dfd0b6252d788cebc74)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>

UPSTREAM: Use the new batched user accesses in generic user string handling

This converts the generic user string functions to use the batched user
access functions.

It makes a big difference on Skylake, which is the first x86
microarchitecture to implement SMAP. The STAC/CLAC instructions are not
very fast, and doing them for each access inside the loop that copies
strings from user space (which is what the pathname handling does for
every pathname the kernel uses, for example) is very inefficient.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change-Id: Ic39a686b4bb1ad9cd16ad0887bb669beed6fe8aa
(cherry picked from commit 9fd4470ff4974c41b1db43c3b355b9085af9c12a)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>

UPSTREAM: Add 'unsafe' user access functions for batched accesses

The naming is meant to discourage random use: the helper functions are
not really any more "unsafe" than the traditional double-underscore
functions (which need the address range checking), but they do need even
more infrastructure around them, and should not be used willy-nilly.

In addition to checking the access range, these user access functions
require that you wrap the user access with a "user_acess_{begin,end}()"
around it.

That allows architectures that implement kernel user access control
(x86: SMAP, arm64: PAN) to do the user access control in the wrapping
user_access_begin/end part, and then batch up the actual user space
accesses using the new interfaces.

The main (and hopefully only) use for these are for core generic access
helpers, initially just the generic user string functions
(strnlen_user() and strncpy_from_user()).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change-Id: Ic64efea41f97171bdbdabe3e531489aebd9b6fac
(cherry picked from commit 5b24a7a2aa2040c8c50c3b71122901d01661ff78)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>

BACKPORT: Don't show empty tag stats for unprivileged uids

BUG: 27577101
BUG: 27532522
Signed-off-by: Mohamad Ayyash <mkayyash@google.com>

UPSTREAM: tcp: fix use after free in tcp_xmit_retransmit_queue()

(cherry picked from commit bb1fceca22492109be12640d49f5ea5a544c6bb4)

When tcp_sendmsg() allocates a fresh and empty skb, it puts it at the
tail of the write queue using tcp_add_write_queue_tail()

Then it attempts to copy user data into this fresh skb.

If the copy fails, we undo the work and remove the fresh skb.

Unfortunately, this undo lacks the change done to tp->highest_sack and
we can leave a dangling pointer (to a freed skb)

Later, tcp_xmit_retransmit_queue() can dereference this pointer and
access freed memory. For regular kernels where memory is not unmapped,
this might cause SACK bugs because tcp_highest_sack_seq() is buggy,
returning garbage instead of tp->snd_nxt, but with various debug
features like CONFIG_DEBUG_PAGEALLOC, this can crash the kernel.

This bug was found by Marco Grassi thanks to syzkaller.

Fixes: 6859d49475d4 ("[TCP]: Abstract tp->highest_sack accessing & point to next skb")
Reported-by: Marco Grassi <marco.gra@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change-Id: I58bb02d6e4e399612e8580b9e02d11e661df82f5
Bug: 31183296

ANDROID: base-cfg: drop SECCOMP_FILTER config

Don't need to set SECCOMP_FILTER explicitly since CONFIG_SECCOMP=y will
select that config anyway.

Fixes: a49dcf2e745c ("ANDROID: base-cfg: enable SECCOMP config")
Change-Id: Iff18ed4d2db5a55b9f9480d5ecbeef7b818b3837
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>

UPSTREAM: proc: prevent accessing /proc/<PID>/environ until it's ready

(cherry picked from commit 8148a73c9901a8794a50f950083c00ccf97d43b3)

If /proc/<PID>/environ gets read before the envp[] array is fully set up
in create_{aout,elf,elf_fdpic,flat}_tables(), we might end up trying to
read more bytes than are actually written, as env_start will already be
set but env_end will still be zero, making the range calculation
underflow, allowing to read beyond the end of what has been written.

Fix this as it is done for /proc/<PID>/cmdline by testing env_end for
zero. It is, apparently, intentionally set last in create_*_tables().

This bug was found by the PaX size_overflow plugin that detected the
arithmetic underflow of 'this_len = env_end - (env_start + src)' when
env_end is still zero.

The expected consequence is that userland trying to access
/proc/<PID>/environ of a not yet fully set up process may get
inconsistent data as we're in the middle of copying in the environment
variables.

Fixes: https://forums.grsecurity.net/viewtopic.php?f=3&t=4363
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=116461
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Pax Team <pageexec@freemail.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change-Id: Ia2f58d48c15478ed4b6e237b63e704c70ff21e96
Bug: 30951939

UPSTREAM: [media] xc2028: unlock on error in xc2028_set_config()

(cherry picked from commit 210bd104c6acd31c3c6b8b075b3f12d4a9f6b60d)

We have to unlock before returning -ENOMEM.

Fixes: 8dfbcc4351a0 ('[media] xc2028: avoid use after free')

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Change-Id: I7b6ba9fde5c6e29467e6de23d398af2fe56e2547
Bug: 30946097

UPSTREAM: [media] xc2028: avoid use after free

(cherry picked from commit 8dfbcc4351a0b6d2f2d77f367552f48ffefafe18)

If struct xc2028_config is passed without a firmware name,
the following trouble may happen:

[11009.907205] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner
[11009.907491] ==================================================================
[11009.907750] BUG: KASAN: use-after-free in strcmp+0x96/0xb0 at addr ffff8803bd78ab40
[11009.907992] Read of size 1 by task modprobe/28992
[11009.907994] =============================================================================
[11009.907997] BUG kmalloc-16 (Tainted: G        W      ): kasan: bad access detected
[11009.907999] -----------------------------------------------------------------------------

[11009.908008] INFO: Allocated in xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd] age=0 cpu=3 pid=28992
[11009.908012] ___slab_alloc+0x581/0x5b0
[11009.908014] __slab_alloc+0x51/0x90
[11009.908017] __kmalloc+0x27b/0x350
[11009.908022] xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd]
[11009.908026] usb_hcd_submit_urb+0x1e8/0x1c60
[11009.908029] usb_submit_urb+0xb0e/0x1200
[11009.908032] usb_serial_generic_write_start+0xb6/0x4c0
[11009.908035] usb_serial_generic_write+0x92/0xc0
[11009.908039] usb_console_write+0x38a/0x560
[11009.908045] call_console_drivers.constprop.14+0x1ee/0x2c0
[11009.908051] console_unlock+0x40d/0x900
[11009.908056] vprintk_emit+0x4b4/0x830
[11009.908061] vprintk_default+0x1f/0x30
[11009.908064] printk+0x99/0xb5
[11009.908067] kasan_report_error+0x10a/0x550
[11009.908070] __asan_report_load1_noabort+0x43/0x50
[11009.908074] INFO: Freed in xc2028_set_config+0x90/0x630 [tuner_xc2028] age=1 cpu=3 pid=28992
[11009.908077] __slab_free+0x2ec/0x460
[11009.908080] kfree+0x266/0x280
[11009.908083] xc2028_set_config+0x90/0x630 [tuner_xc2028]
[11009.908086] xc2028_attach+0x310/0x8a0 [tuner_xc2028]
[11009.908090] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb]
[11009.908094] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb]
[11009.908098] em28xx_dvb_init+0x81/0x8a [em28xx_dvb]
[11009.908101] em28xx_register_extension+0xd9/0x190 [em28xx]
[11009.908105] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb]
[11009.908108] do_one_initcall+0x141/0x300
[11009.908111] do_init_module+0x1d0/0x5ad
[11009.908114] load_module+0x6666/0x9ba0
[11009.908117] SyS_finit_module+0x108/0x130
[11009.908120] entry_SYSCALL_64_fastpath+0x16/0x76
[11009.908123] INFO: Slab 0xffffea000ef5e280 objects=25 used=25 fp=0x          (null) flags=0x2ffff8000004080
[11009.908126] INFO: Object 0xffff8803bd78ab40 @offset=2880 fp=0x0000000000000001

[11009.908130] Bytes b4 ffff8803bd78ab30: 01 00 00 00 2a 07 00 00 9d 28 00 00 01 00 00 00  ....*....(......
[11009.908133] Object ffff8803bd78ab40: 01 00 00 00 00 00 00 00 b0 1d c3 6a 00 88 ff ff  ...........j....
[11009.908137] CPU: 3 PID: 28992 Comm: modprobe Tainted: G    B   W       4.5.0-rc1+ #43
[11009.908140] Hardware name:                  /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015
[11009.908142]  ffff8803bd78a000 ffff8802c273f1b8 ffffffff81932007 ffff8803c6407a80
[11009.908148]  ffff8802c273f1e8 ffffffff81556759 ffff8803c6407a80 ffffea000ef5e280
[11009.908153]  ffff8803bd78ab40 dffffc0000000000 ffff8802c273f210 ffffffff8155ccb4
[11009.908158] Call Trace:
[11009.908162]  [<ffffffff81932007>] dump_stack+0x4b/0x64
[11009.908165]  [<ffffffff81556759>] print_trailer+0xf9/0x150
[11009.908168]  [<ffffffff8155ccb4>] object_err+0x34/0x40
[11009.908171]  [<ffffffff8155f260>] kasan_report_error+0x230/0x550
[11009.908175]  [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290
[11009.908179]  [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50
[11009.908182]  [<ffffffff8155f5c3>] __asan_report_load1_noabort+0x43/0x50
[11009.908185]  [<ffffffff8155ea00>] ? __asan_register_globals+0x50/0xa0
[11009.908189]  [<ffffffff8194cea6>] ? strcmp+0x96/0xb0
[11009.908192]  [<ffffffff8194cea6>] strcmp+0x96/0xb0
[11009.908196]  [<ffffffffa13ba4ac>] xc2028_set_config+0x15c/0x630 [tuner_xc2028]
[11009.908200]  [<ffffffffa13bac90>] xc2028_attach+0x310/0x8a0 [tuner_xc2028]
[11009.908203]  [<ffffffff8155ea78>] ? memset+0x28/0x30
[11009.908206]  [<ffffffffa13ba980>] ? xc2028_set_config+0x630/0x630 [tuner_xc2028]
[11009.908211]  [<ffffffffa157a59a>] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb]
[11009.908215]  [<ffffffffa157aa2a>] ? em28xx_dvb_init.part.3+0x37c/0x5cf4 [em28xx_dvb]
[11009.908219]  [<ffffffffa157a3a1>] ? hauppauge_hvr930c_init+0x487/0x487 [em28xx_dvb]
[11009.908222]  [<ffffffffa01795ac>] ? lgdt330x_attach+0x1cc/0x370 [lgdt330x]
[11009.908226]  [<ffffffffa01793e0>] ? i2c_read_demod_bytes.isra.2+0x210/0x210 [lgdt330x]
[11009.908230]  [<ffffffff812e87d0>] ? ref_module.part.15+0x10/0x10
[11009.908233]  [<ffffffff812e56e0>] ? module_assert_mutex_or_preempt+0x80/0x80
[11009.908238]  [<ffffffffa157af92>] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb]
[11009.908242]  [<ffffffffa157a6ae>] ? em28xx_attach_xc3028.constprop.7+0x30d/0x30d [em28xx_dvb]
[11009.908245]  [<ffffffff8195222d>] ? string+0x14d/0x1f0
[11009.908249]  [<ffffffff8195381f>] ? symbol_string+0xff/0x1a0
[11009.908253]  [<ffffffff81953720>] ? uuid_string+0x6f0/0x6f0
[11009.908257]  [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0
[11009.908260]  [<ffffffff8104b02f>] ? print_context_stack+0x7f/0xf0
[11009.908264]  [<ffffffff812e9846>] ? __module_address+0xb6/0x360
[11009.908268]  [<ffffffff8137fdc9>] ? is_ftrace_trampoline+0x99/0xe0
[11009.908271]  [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0
[11009.908275]  [<ffffffff81240a70>] ? debug_check_no_locks_freed+0x290/0x290
[11009.908278]  [<ffffffff8104a24b>] ? dump_trace+0x11b/0x300
[11009.908282]  [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx]
[11009.908285]  [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290
[11009.908289]  [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590
[11009.908292]  [<ffffffff812404dd>] ? trace_hardirqs_on+0xd/0x10
[11009.908296]  [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx]
[11009.908299]  [<ffffffff822dcbb0>] ? mutex_trylock+0x400/0x400
[11009.908302]  [<ffffffff810021a1>] ? do_one_initcall+0x131/0x300
[11009.908306]  [<ffffffff81296dc7>] ? call_rcu_sched+0x17/0x20
[11009.908309]  [<ffffffff8159e708>] ? put_object+0x48/0x70
[11009.908314]  [<ffffffffa1579f11>] em28xx_dvb_init+0x81/0x8a [em28xx_dvb]
[11009.908317]  [<ffffffffa13e81f9>] em28xx_register_extension+0xd9/0x190 [em28xx]
[11009.908320]  [<ffffffffa0150000>] ? 0xffffffffa0150000
[11009.908324]  [<ffffffffa0150010>] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb]
[11009.908327]  [<ffffffff810021b1>] do_one_initcall+0x141/0x300
[11009.908330]  [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40
[11009.908333]  [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590
[11009.908337]  [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50
[11009.908340]  [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50
[11009.908343]  [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50
[11009.908346]  [<ffffffff8155ea37>] ? __asan_register_globals+0x87/0xa0
[11009.908350]  [<ffffffff8144da7b>] do_init_module+0x1d0/0x5ad
[11009.908353]  [<ffffffff812f2626>] load_module+0x6666/0x9ba0
[11009.908356]  [<ffffffff812e9c90>] ? symbol_put_addr+0x50/0x50
[11009.908361]  [<ffffffffa1580037>] ? em28xx_dvb_init.part.3+0x5989/0x5cf4 [em28xx_dvb]
[11009.908366]  [<ffffffff812ebfc0>] ? module_frob_arch_sections+0x20/0x20
[11009.908369]  [<ffffffff815bc940>] ? open_exec+0x50/0x50
[11009.908374]  [<ffffffff811671bb>] ? ns_capable+0x5b/0xd0
[11009.908377]  [<ffffffff812f5e58>] SyS_finit_module+0x108/0x130
[11009.908379]  [<ffffffff812f5d50>] ? SyS_init_module+0x1f0/0x1f0
[11009.908383]  [<ffffffff81004044>] ? lockdep_sys_exit_thunk+0x12/0x14
[11009.908394]  [<ffffffff822e6936>] entry_SYSCALL_64_fastpath+0x16/0x76
[11009.908396] Memory state around the buggy address:
[11009.908398]  ffff8803bd78aa00: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[11009.908401]  ffff8803bd78aa80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[11009.908403] >ffff8803bd78ab00: fc fc fc fc fc fc fc fc 00 00 fc fc fc fc fc fc
[11009.908405]                                            ^
[11009.908407]  ffff8803bd78ab80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[11009.908409]  ffff8803bd78ac00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[11009.908411] ==================================================================

In order to avoid it, let's set the cached value of the firmware
name to NULL after freeing it. While here, return an error if
the memory allocation fails.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Change-Id: I945c841dcfb45de2056267e4aa50bbe176b527cf
Bug: 30946097

UPSTREAM: block: fix use-after-free in seq file

(cherry picked from commit 77da160530dd1dc94f6ae15a981f24e5f0021e84)

I got a KASAN report of use-after-free:

    ==================================================================
    BUG: KASAN: use-after-free in klist_iter_exit+0x61/0x70 at addr ffff8800b6581508
    Read of size 8 by task trinity-c1/315
    =============================================================================
    BUG kmalloc-32 (Not tainted): kasan: bad access detected
    -----------------------------------------------------------------------------

    Disabling lock debugging due to kernel taint
    INFO: Allocated in disk_seqf_start+0x66/0x110 age=144 cpu=1 pid=315
            ___slab_alloc+0x4f1/0x520
            __slab_alloc.isra.58+0x56/0x80
            kmem_cache_alloc_trace+0x260/0x2a0
            disk_seqf_start+0x66/0x110
            traverse+0x176/0x860
            seq_read+0x7e3/0x11a0
            proc_reg_read+0xbc/0x180
            do_loop_readv_writev+0x134/0x210
            do_readv_writev+0x565/0x660
            vfs_readv+0x67/0xa0
            do_preadv+0x126/0x170
            SyS_preadv+0xc/0x10
            do_syscall_64+0x1a1/0x460
            return_from_SYSCALL_64+0x0/0x6a
    INFO: Freed in disk_seqf_stop+0x42/0x50 age=160 cpu=1 pid=315
            __slab_free+0x17a/0x2c0
            kfree+0x20a/0x220
            disk_seqf_stop+0x42/0x50
            traverse+0x3b5/0x860
            seq_read+0x7e3/0x11a0
            proc_reg_read+0xbc/0x180
            do_loop_readv_writev+0x134/0x210
            do_readv_writev+0x565/0x660
            vfs_readv+0x67/0xa0
            do_preadv+0x126/0x170
            SyS_preadv+0xc/0x10
            do_syscall_64+0x1a1/0x460
            return_from_SYSCALL_64+0x0/0x6a

    CPU: 1 PID: 315 Comm: trinity-c1 Tainted: G    B           4.7.0+ #62
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
     ffffea0002d96000 ffff880119b9f918 ffffffff81d6ce81 ffff88011a804480
     ffff8800b6581500 ffff880119b9f948 ffffffff8146c7bd ffff88011a804480
     ffffea0002d96000 ffff8800b6581500 fffffffffffffff4 ffff880119b9f970
    Call Trace:
     [<ffffffff81d6ce81>] dump_stack+0x65/0x84
     [<ffffffff8146c7bd>] print_trailer+0x10d/0x1a0
     [<ffffffff814704ff>] object_err+0x2f/0x40
     [<ffffffff814754d1>] kasan_report_error+0x221/0x520
     [<ffffffff8147590e>] __asan_report_load8_noabort+0x3e/0x40
     [<ffffffff83888161>] klist_iter_exit+0x61/0x70
     [<ffffffff82404389>] class_dev_iter_exit+0x9/0x10
     [<ffffffff81d2e8ea>] disk_seqf_stop+0x3a/0x50
     [<ffffffff8151f812>] seq_read+0x4b2/0x11a0
     [<ffffffff815f8fdc>] proc_reg_read+0xbc/0x180
     [<ffffffff814b24e4>] do_loop_readv_writev+0x134/0x210
     [<ffffffff814b4c45>] do_readv_writev+0x565/0x660
     [<ffffffff814b8a17>] vfs_readv+0x67/0xa0
     [<ffffffff814b8de6>] do_preadv+0x126/0x170
     [<ffffffff814b92ec>] SyS_preadv+0xc/0x10

This problem can occur in the following situation:

open()
- pread()
    - .seq_start()
       - iter = kmalloc() // succeeds
       - seqf->private = iter
    - .seq_stop()
       - kfree(seqf->private)
- pread()
    - .seq_start()
       - iter = kmalloc() // fails
    - .seq_stop()
       - class_dev_iter_exit(seqf->private) // boom! old pointer

As the comment in disk_seqf_stop() says, stop is called even if start
failed, so we need to reinitialise the private pointer to NULL when seq
iteration stops.

An alternative would be to set the private pointer to NULL when the
kmalloc() in disk_seqf_start() fails.

Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Change-Id: I07b33f4b38341f60a37806cdd45b0a0c3ab4d84d
Bug: 30942273

UPSTREAM: assoc_array: don't call compare_object() on a node

(cherry picked from commit 8d4a2ec1e0b41b0cf9a0c5cd4511da7f8e4f3de2)

Changes since V1: fixed the description and added KASan warning.

In assoc_array_insert_into_terminal_node(), we call the
compare_object() method on all non-empty slots, even when they're
not leaves, passing a pointer to an unexpected structure to
compare_object(). Currently it causes an out-of-bound read access
in keyring_compare_object detected by KASan (see below). The issue
is easily reproduced with keyutils testsuite.
Only call compare_object() when the slot is a leave.

KASan warning:
==================================================================
BUG: KASAN: slab-out-of-bounds in keyring_compare_object+0x213/0x240 at addr ffff880060a6f838
Read of size 8 by task keyctl/1655
=============================================================================
BUG kmalloc-192 (Not tainted): kasan: bad access detected
-----------------------------------------------------------------------------

Disabling lock debugging due to kernel taint
INFO: Allocated in assoc_array_insert+0xfd0/0x3a60 age=69 cpu=1 pid=1647
___slab_alloc+0x563/0x5c0
__slab_alloc+0x51/0x90
kmem_cache_alloc_trace+0x263/0x300
assoc_array_insert+0xfd0/0x3a60
__key_link_begin+0xfc/0x270
key_create_or_update+0x459/0xaf0
SyS_add_key+0x1ba/0x350
entry_SYSCALL_64_fastpath+0x12/0x76
INFO: Slab 0xffffea0001829b80 objects=16 used=8 fp=0xffff880060a6f550 flags=0x3fff8000004080
INFO: Object 0xffff880060a6f740 @offset=5952 fp=0xffff880060a6e5d1

Bytes b4 ffff880060a6f730: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f740: d1 e5 a6 60 00 88 ff ff 0e 00 00 00 00 00 00 00  ...`............
Object ffff880060a6f750: 02 cf 8e 60 00 88 ff ff 02 c0 8e 60 00 88 ff ff  ...`.......`....
Object ffff880060a6f760: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f770: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f790: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f7a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f7b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f7c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f7d0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f7e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f7f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
CPU: 0 PID: 1655 Comm: keyctl Tainted: G    B           4.5.0-rc4-kasan+ #291
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
0000000000000000 000000001b2800b4 ffff880060a179e0 ffffffff81b60491
ffff88006c802900 ffff880060a6f740 ffff880060a17a10 ffffffff815e2969
ffff88006c802900 ffffea0001829b80 ffff880060a6f740 ffff880060a6e650
Call Trace:
[<ffffffff81b60491>] dump_stack+0x85/0xc4
[<ffffffff815e2969>] print_trailer+0xf9/0x150
[<ffffffff815e9454>] object_err+0x34/0x40
[<ffffffff815ebe50>] kasan_report_error+0x230/0x550
[<ffffffff819949be>] ? keyring_get_key_chunk+0x13e/0x210
[<ffffffff815ec62d>] __asan_report_load_n_noabort+0x5d/0x70
[<ffffffff81994cc3>] ? keyring_compare_object+0x213/0x240
[<ffffffff81994cc3>] keyring_compare_object+0x213/0x240
[<ffffffff81bc238c>] assoc_array_insert+0x86c/0x3a60
[<ffffffff81bc1b20>] ? assoc_array_cancel_edit+0x70/0x70
[<ffffffff8199797d>] ? __key_link_begin+0x20d/0x270
[<ffffffff8199786c>] __key_link_begin+0xfc/0x270
[<ffffffff81993389>] key_create_or_update+0x459/0xaf0
[<ffffffff8128ce0d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff81992f30>] ? key_type_lookup+0xc0/0xc0
[<ffffffff8199e19d>] ? lookup_user_key+0x13d/0xcd0
[<ffffffff81534763>] ? memdup_user+0x53/0x80
[<ffffffff819983ea>] SyS_add_key+0x1ba/0x350
[<ffffffff81998230>] ? key_get_type_from_user.constprop.6+0xa0/0xa0
[<ffffffff828bcf4e>] ? retint_user+0x18/0x23
[<ffffffff8128cc7e>] ? trace_hardirqs_on_caller+0x3fe/0x580
[<ffffffff81004017>] ? trace_hardirqs_on_thunk+0x17/0x19
[<ffffffff828bc432>] entry_SYSCALL_64_fastpath+0x12/0x76
Memory state around the buggy address:
ffff880060a6f700: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
ffff880060a6f780: 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc
>ffff880060a6f800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                                        ^
ffff880060a6f880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff880060a6f900: fc fc fc fc fc fc 00 00 00 00 00 00 00 00 00 00
==================================================================

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: stable@vger.kernel.org
Change-Id: I903935a221a5b9fb14cec14ef64bd2b6fa8eb222
Bug: 30513364

ANDROID: base-cfg: enable SECCOMP config

Enable following seccomp configs

CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y

Otherwise we will get mediacode error like this on Android N:

E /system/bin/mediaextractor: libminijail: prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER): Invalid argument

Change-Id: I2477b6a2cfdded5c0ebf6ffbb6150b0e5fe2ba12
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>

ANDROID: rcu_sync: Export rcu_sync_lockdep_assert

x86_64:allmodconfig fails to build with the following error.

ERROR: "rcu_sync_lockdep_assert" [kernel/locking/locktorture.ko] undefined!

Introduced by commit 3228c5eb7af2 ("RFC: FROMLIST: locking/percpu-rwsem:
Optimize readers and reduce global impact"). The applied upstream version
exports the missing symbol, so let's do the same.

Change-Id: If4e516715c3415fe8c82090f287174857561550d
Fixes: 3228c5eb7af2 ("RFC: FROMLIST: locking/percpu-rwsem: Optimize ...")
Signed-off-by: Guenter Roeck <groeck@chromium.org>

UPSTREAM: USB: cdc-acm: more sanity checking

commit 8835ba4a39cf53f705417b3b3a94eb067673f2c9 upstream.

An attack has become available which pretends to be a quirky
device circumventing normal sanity checks and crashes the kernel
by an insufficient number of interfaces. This patch adds a check
to the code path for quirky devices.

BUG: 28242610

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I9a5f7f3c704b65e866335054f470451fcfae9d1c

UPSTREAM: USB: iowarrior: fix oops with malicious USB descriptors

commit 4ec0ef3a82125efc36173062a50624550a900ae0 upstream.

The iowarrior driver expects at least one valid endpoint. If given
malicious descriptors that specify 0 for the number of endpoints,
it will crash in the probe function. Ensure there is at least
one endpoint on the interface before using it.

The full report of this issue can be found here:
http://seclists.org/bugtraq/2016/Mar/87

BUG: 28242610

Reported-by: Ralf Spenneberg <ralf@spenneberg.net>
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: If5161c23928e9ef77cb3359cba9b36622b1908df

UPSTREAM: USB: usb_driver_claim_interface: add sanity checking

commit 0b818e3956fc1ad976bee791eadcbb3b5fec5bfd upstream.

Attacks that trick drivers into passing a NULL pointer
to usb_driver_claim_interface() using forged descriptors are
known. This thwarts them by sanity checking.

BUG: 28242610

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: Ib43ec5edb156985a9db941785a313f6801df092a

UPSTREAM: USB: mct_u232: add sanity checking in probe

commit 4e9a0b05257f29cf4b75f3209243ed71614d062e upstream.

An attack using the lack of sanity checking in probe is known. This
patch checks for the existence of a second port.

CVE-2016-3136
BUG: 28242610
Signed-off-by: Oliver Neukum <ONeukum@suse.com>
[johan: add error message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I284ad648c2087c34a098d67e0cc6d948a568413c

UPSTREAM: USB: cypress_m8: add endpoint sanity check

commit c55aee1bf0e6b6feec8b2927b43f7a09a6d5f754 upstream.

An attack using missing endpoints exists.

CVE-2016-3137

BUG: 28242610
Signed-off-by: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I1cc7957a5924175d24f12fdc41162ece67c907e5

UPSTREAM: Input: powermate - fix oops with malicious USB descriptors

The powermate driver expects at least one valid USB endpoint in its
probe function. If given malicious descriptors that specify 0 for
the number of endpoints, it will crash. Validate the number of
endpoints on the interface before using them.

The full report for this issue can be found here:
http://seclists.org/bugtraq/2016/Mar/85

BUG: 28242610

Reported-by: Ralf Spenneberg <ralf@spenneberg.net>
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I1cb956a35f3bba73324240d5bd0a029f49d3c456

BACKPORT: tcp: enable per-socket rate limiting of all 'challenge acks'

(cherry picked from commit 083ae308280d13d187512b9babe3454342a7987e)

The per-socket rate limit for 'challenge acks' was introduced in the
context of limiting ack loops:

commit f2b2c582e824 ("tcp: mitigate ACK loops for connections as tcp_sock")

And I think it can be extended to rate limit all 'challenge acks' on a
per-socket basis.

Since we have the global tcp_challenge_ack_limit, this patch allows for
tcp_challenge_ack_limit to be set to a large value and effectively rely on
the per-socket limit, or set tcp_challenge_ack_limit to a lower value and
still prevents a single connections from consuming the entire challenge ack
quota.

It further moves in the direction of eliminating the global limit at some
point, as Eric Dumazet has suggested. This a follow-up to:
Subject: tcp: make challenge acks less predictable

Cc: Eric Dumazet <edumazet@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Yue Cao <ycao009@ucr.edu>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change-Id: I622d5ae96e9387e775a0196c892d8d0e1a5564a7
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>

RFC: FROMLIST: cgroup: reduce read locked section of cgroup_threadgroup_rwsem during fork

cgroup_threadgroup_rwsem is acquired in read mode during process exit
and fork.  It is also grabbed in write mode during
__cgroups_proc_write().  I've recently run into a scenario with lots
of memory pressure and OOM and I am beginning to see

systemd

__switch_to+0x1f8/0x350
__schedule+0x30c/0x990
schedule+0x48/0xc0
percpu_down_write+0x114/0x170
__cgroup_procs_write.isra.12+0xb8/0x3c0
cgroup_file_write+0x74/0x1a0
kernfs_fop_write+0x188/0x200
__vfs_write+0x6c/0xe0
vfs_write+0xc0/0x230
SyS_write+0x6c/0x110
system_call+0x38/0xb4

This thread is waiting on the reader of cgroup_threadgroup_rwsem to
exit.  The reader itself is under memory pressure and has gone into
reclaim after fork. There are times the reader also ends up waiting on
oom_lock as well.

__switch_to+0x1f8/0x350
__schedule+0x30c/0x990
schedule+0x48/0xc0
jbd2_log_wait_commit+0xd4/0x180
ext4_evict_inode+0x88/0x5c0
evict+0xf8/0x2a0
dispose_list+0x50/0x80
prune_icache_sb+0x6c/0x90
super_cache_scan+0x190/0x210
shrink_slab.part.15+0x22c/0x4c0
shrink_zone+0x288/0x3c0
do_try_to_free_pages+0x1dc/0x590
try_to_free_pages+0xdc/0x260
__alloc_pages_nodemask+0x72c/0xc90
alloc_pages_current+0xb4/0x1a0
page_table_alloc+0xc0/0x170
__pte_alloc+0x58/0x1f0
copy_page_range+0x4ec/0x950
copy_process.isra.5+0x15a0/0x1870
_do_fork+0xa8/0x4b0
ppc_clone+0x8/0xc

In the meanwhile, all processes exiting/forking are blocked almost
stalling the system.

This patch moves the threadgroup_change_begin from before
cgroup_fork() to just before cgroup_canfork().  There is no nee to
worry about threadgroup changes till the task is actually added to the
threadgroup.  This avoids having to call reclaim with
cgroup_threadgroup_rwsem held.

tj: Subject and description edits.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Acked-by: Zefan Li <lizefan@huawei.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Tejun Heo <tj@kernel.org>
[jstultz: Cherry-picked from:
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git 568ac888215c7f]
Change-Id: Ie8ece84fb613cf6a7b08cea1468473a8df2b9661
Signed-off-by: John Stultz <john.stultz@linaro.org>

RFC: FROMLIST: cgroup: avoid synchronize_sched() in __cgroup_procs_write()

The current percpu-rwsem read side is entirely free of serializing insns
at the cost of having a synchronize_sched() in the write path.

The latency of the synchronize_sched() is too high for cgroups. The
commit 1ed1328792ff talks about the write path being a fairly cold path
but this is not the case for Android which moves task to the foreground
cgroup and back around binder IPC calls from foreground processes to
background processes, so it is significantly hotter than human initiated
operations.

Switch cgroup_threadgroup_rwsem into the slow mode for now to avoid the
problem, hopefully it should not be that slow after another commit
80127a39681b ("locking/percpu-rwsem: Optimize readers and reduce global
impact").

We could just add rcu_sync_enter() into cgroup_init() but we do not want
another synchronize_sched() at boot time, so this patch adds the new helper
which doesn't block but currently can only be called before the first use.

Cc: Tejun Heo <tj@kernel.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Reported-by: John Stultz <john.stultz@linaro.org>
Reported-by: Dmitry Shmidt <dimitrysh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
[jstultz: backported to 4.4]
Change-Id: I34aa9c394d3052779b56976693e96d861bd255f2
Mailing-list-URL: https://lkml.org/lkml/2016/8/11/557
Signed-off-by: John Stultz <john.stultz@linaro.org>

RFC: FROMLIST: locking/percpu-rwsem: Optimize readers and reduce global impact

Currently the percpu-rwsem switches to (global) atomic ops while a
writer is waiting; which could be quite a while and slows down
releasing the readers.

This patch cures this problem by ordering the reader-state vs
reader-count (see the comments in __percpu_down_read() and
percpu_down_write()). This changes a global atomic op into a full
memory barrier, which doesn't have the global cacheline contention.

This also enables using the percpu-rwsem with rcu_sync disabled in order
to bias the implementation differently, reducing the writer latency by
adding some cost to readers.

Mailing-list-URL: https://lkml.org/lkml/2016/8/9/181
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[jstultz: Backported to 4.4]
Change-Id: I8ea04b4dca2ec36f1c2469eccafde1423490572f
Signed-off-by: John Stultz <john.stultz@linaro.org>

net: ipv6: Fix ping to link-local addresses.

ping_v6_sendmsg does not set flowi6_oif in response to
sin6_scope_id or sk_bound_dev_if, so it is not possible to use
these APIs to ping an IPv6 address on a different interface.
Instead, it sets flowi6_iif, which is incorrect but harmless.

Stop setting flowi6_iif, and support various ways of setting oif
in the same priority order used by udpv6_sendmsg.

[Backport of net 5e457896986e16c440c97bb94b9ccd95dd157292]

Bug: 29370996
Change-Id: Ibe1b9434c00ed96f1e30acb110734c6570b087b8
Tested: https://android-review.googlesource.com/#/c/254470/
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: fix endianness error in icmpv6_err

IPv6 ping socket error handler doesn't correctly convert the new 32 bit
mtu to host endianness before using.

[Cherry-pick of net dcb94b88c09ce82a80e188d49bcffdc83ba215a6]

Bug: 29370996
Change-Id: Iea0ca79f16c2a1366d82b3b0a3097093d18da8b7
Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 6d0bfe22611602f ("net: ipv6: Add IPv6 support to the ping socket.")
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ANDROID: dm: android-verity: Allow android-verity to be compiled as an independent module

Exports the device mapper callbacks of linear and dm-verity-target
methods.

Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I0358be0615c431dce3cc78575aaac4ccfe3aacd7

Revert "Android: MMC/UFS IO Latency Histograms."

This reverts commit 8d525c512280bb7d8218fd59c04de985b1886eca.

Change-Id: I69350b98d9de9b1c9f591e03a90f133e328ba72a

Android: MMC/UFS IO Latency Histograms.

This patch adds a new sysfs node (latency_hist) and reports IO
(svc time) latency histograms. Disabled by default, can be enabled
by echoing 0 into latency_hist, stats can be cleared by writing 2
into latency_hist.

Bug: 30677035
Change-Id: I625938135ea33e6e87cf6af1fc7edc136d8b4b32
Signed-off-by: Mohan Srinivasan <srmohan@google.com>

UPSTREAM: af_unix: Guard against other == sk in unix_dgram_sendmsg

(cherry picked from commit a5527dda344fff0514b7989ef7a755729769daa1)

The unix_dgram_sendmsg routine use the following test

if (unlikely(unix_peer(other) != sk && unix_recvq_full(other))) {

to determine if sk and other are in an n:1 association (either
established via connect or by using sendto to send messages to an
unrelated socket identified by address). This isn't correct as the
specified address could have been bound to the sending socket itself or
because this socket could have been connected to itself by the time of
the unix_peer_get but disconnected before the unix_state_lock(other). In
both cases, the if-block would be entered despite other == sk which
might either block the sender unintentionally or lead to trying to unlock
the same spin lock twice for a non-blocking send. Add a other != sk
check to guard against this.

Fixes: 7d267278a9ec ("unix: avoid use-after-free in ep_remove_wait_queue")
Reported-By: Philipp Hahn <pmhahn@pmhahn.de>
Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com>
Tested-by: Philipp Hahn <pmhahn@pmhahn.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change-Id: I4ebef6a390df3487903b166b837e34c653e01cb2
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>

UPSTREAM: ALSA: timer: Fix race among timer ioctls

(cherry picked from commit af368027a49a751d6ff4ee9e3f9961f35bb4fede)

ALSA timer ioctls have an open race and this may lead to a
use-after-free of timer instance object.  A simplistic fix is to make
each ioctl exclusive.  We have already tread_sem for controlling the
tread, and extend this as a global mutex to be applied to each ioctl.

The downside is, of course, the worse concurrency.  But these ioctls
aren't to be parallel accessible, in anyway, so it should be fine to
serialize there.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Change-Id: I1ac52f1cba5e7408fd88c8fc1c30ca2e83967ebb
Bug: 28694392

UPSTREAM: tcp: make challenge acks less predictable

(cherry picked from commit 75ff39ccc1bd5d3c455b6822ab09e533c551f758)

Yue Cao claims that current host rate limiting of challenge ACKS
(RFC 5961) could leak enough information to allow a patient attacker
to hijack TCP sessions. He will soon provide details in an academic
paper.

This patch increases the default limit from 100 to 1000, and adds
some randomization so that the attacker can no longer hijack
sessions without spending a considerable amount of probes.

Based on initial analysis and patch from Linus.

Note that we also have per socket rate limiting, so it is tempting
to remove the host limit in the future.

v2: randomize the count of challenge acks per second, not the period.

Fixes: 282f23c6ee34 ("tcp: implement RFC 5961 3.2")
Reported-by: Yue Cao <ycao009@ucr.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change-Id: Ib46ba66f5e4a5a7c81bfccd7b0aa83c3d9e1b3bb
Bug: 30809774

UPSTREAM: usb: gadget: configfs: add mutex lock before unregister gadget

There may be a race condition if f_fs calls unregister_gadget_item in
ffs_closed() when unregister_gadget is called by UDC store at the same time.
this leads to a kernel NULL pointer dereference:

[  310.644928] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[  310.645053] init: Service 'adbd' is being killed...
[  310.658938] pgd = c9528000
[  310.662515] [00000004] *pgd=19451831, *pte=00000000, *ppte=00000000
[  310.669702] Internal error: Oops: 817 [#1] PREEMPT SMP ARM
[  310.675211] Modules linked in:
[  310.678294] CPU: 0 PID: 1537 Comm: ->transport Not tainted 4.1.15-03725-g793404c #2
[  310.685958] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[  310.692493] task: c8e24200 ti: c945e000 task.ti: c945e000
[  310.697911] PC is at usb_gadget_unregister_driver+0xb4/0xd0
[  310.703502] LR is at __mutex_lock_slowpath+0x10c/0x16c
[  310.708648] pc : [<c075efc0>]    lr : [<c0bfb0bc>]    psr: 600f0113
<snip..>
[  311.565585] [<c075efc0>] (usb_gadget_unregister_driver) from [<c075e2b8>] (unregister_gadget_item+0x1c/0x34)
[  311.575426] [<c075e2b8>] (unregister_gadget_item) from [<c076fcc8>] (ffs_closed+0x8c/0x9c)
[  311.583702] [<c076fcc8>] (ffs_closed) from [<c07736b8>] (ffs_data_reset+0xc/0xa0)
[  311.591194] [<c07736b8>] (ffs_data_reset) from [<c07738ac>] (ffs_data_closed+0x90/0xd0)
[  311.599208] [<c07738ac>] (ffs_data_closed) from [<c07738f8>] (ffs_ep0_release+0xc/0x14)
[  311.607224] [<c07738f8>] (ffs_ep0_release) from [<c023e030>] (__fput+0x80/0x1d0)
[  311.614635] [<c023e030>] (__fput) from [<c014e688>] (task_work_run+0xb0/0xe8)
[  311.621788] [<c014e688>] (task_work_run) from [<c010afdc>] (do_work_pending+0x7c/0xa4)
[  311.629718] [<c010afdc>] (do_work_pending) from [<c010770c>] (work_pending+0xc/0x20)

for functions using functionFS, i.e. android adbd will close /dev/usb-ffs/adb/ep0
when usb IO thread fails, but switch adb from on to off also triggers write
"none" > UDC. These 2 operations both call unregister_gadget, which will lead
to the panic above.

add a mutex before calling unregister_gadget for api used in f_fs.

Signed-off-by: Winter Wang <wente.wang@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

ANDROID: dm-verity: adopt changes made to dm callbacks

v4.4 introduced changes to the callbacks used for
dm-linear and dm-verity-target targets. Move to those headers
in dm-android-verity.

Verified on hikey while having
BOARD_USES_RECOVERY_AS_BOOT := true
BOARD_BUILD_SYSTEM_ROOT_IMAGE := true

BUG: 27339727
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: Ic64950c3b55f0a6eaa570bcedc2ace83bbf3005e

UPSTREAM: ecryptfs: fix handling of directory opening

(cherry picked from commit 6a480a7842545ec520a91730209ec0bae41694c1)

First of all, trying to open them r/w is idiocy; it's guaranteed to fail.
Moreover, assigning ->f_pos and assuming that everything will work is
blatantly broken - try that with e.g. tmpfs as underlying layer and watch
the fireworks. There may be a non-trivial amount of state associated with
current IO position, well beyond the numeric offset. Using the single
struct file associated with underlying inode is really not a good idea;
we ought to open one for each ecryptfs directory struct file.

Additionally, file_operations both for directories and non-directories are
full of pointless methods; non-directories should *not* have ->iterate(),
directories should not have ->flush(), ->fasync() and ->splice_read().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Change-Id: I4813ce803f270fdd364758ce1dc108b76eab226e
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>

UPSTREAM: ecryptfs: don't allow mmap when the lower fs doesn't support it

(cherry picked from commit f0fe970df3838c202ef6c07a4c2b36838ef0a88b)

There are legitimate reasons to disallow mmap on certain files, notably
in sysfs or procfs. We shouldn't emulate mmap support on file systems
that don't offer support natively.

CVE-2016-1583

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: stable@vger.kernel.org
[tyhicks: clean up f_op check by using ecryptfs_file_to_lower()]
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Change-Id: I66e3670771630a25b0608f10019d1584e9ce73a6
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>

UPSTREAM: Revert "ecryptfs: forbid opening files without mmap handler"

(cherry picked from commit 78c4e172412de5d0456dc00d2b34050aa0b683b5)

This reverts upstream commit 2f36db71009304b3f0b95afacd8eba1f9f046b87.

It fixed a local root exploit but also introduced a dependency on
the lower file system implementing an mmap operation just to open a file,
which is a bit of a heavy hammer. The right fix is to have mmap depend
on the existence of the mmap handler instead.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Fixes: Change-Id I0be77c7f8bd3046bc34cd87ef577529792d479bc
("UPSTREAM: ecryptfs: forbid opening files without mmap handler")
Change-Id: Ib9bc87099f7f89e4e12dbc1a79e884dcadb1befb
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>

ANDROID: net: core: fix UID-based routing

Fix RTA_UID enum to match it with the Android userspace code which
assumes RTA_UID=18.

With this patch all Android kernel networking unit tests mentioned here
https://source.android.com/devices/tech/config/kernel_network_tests.html
are success.

Without this patch multinetwork_test.py unit test fails.

Change-Id: I3ff36670f7d4e5bf5f01dce584ae9d53deabb3ed
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>

ANDROID: net: fib: remove duplicate assignment

Remove duplicate FRA_GOTO assignment.

Fixes: fd2cf795f3ab ("net: core: Support UID-based routing.")

Change-Id: I462c24b16fdef42ae2332571a0b95de3ef9d2e25
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>

FROMLIST: proc: Fix timerslack_ns CAP_SYS_NICE check when adjusting self

In changing from checking ptrace_may_access(p, PTRACE_MODE_ATTACH_FSCREDS)
to capable(CAP_SYS_NICE), I missed that ptrace_my_access succeeds
when p == current, but the CAP_SYS_NICE doesn't.

Thus while the previous commit was intended to loosen the needed
privledges to modify a processes timerslack, it needlessly restricted
a task modifying its own timerslack via the proc/<tid>/timerslack_ns
(which is permitted also via the PR_SET_TIMERSLACK method).

This patch corrects this by checking if p == current before checking
the CAP_SYS_NICE value.

Cc: Kees Cook <keescook@chromium.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
CC: Arjan van de Ven <arjan@linux.intel.com>
Cc: Oren Laadan <orenl@cellrox.com>
Cc: Ruchi Kandoi <kandoiruchi@google.com>
Cc: Rom Lemarchand <romlem@android.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Colin Cross <ccross@android.com>
Cc: Nick Kralevich <nnk@google.com>
Cc: Dmitry Shmidt <dimitrysh@google.com>
Cc: Elliott Hughes <enh@google.com>
Cc: Android Kernel Team <kernel-team@android.com>
Mailing-list-url: http://www.spinics.net/lists/kernel/msg2317488.html
Change-Id: Ia3e8aff07c2d41f55b6617502d33c39b7d781aac
Signed-off-by: John Stultz <john.stultz@linaro.org>

ANDROID: dm verity fec: pack the fec_header structure

The fec_header structure is generated build time and stored on disk.
The fec_header might be build on a 64 bits machine while it is read
per a 32 bits device or the other way around. In such situations, the
fec_header fields are not aligned as expected by the device and it
fails to read the fec_header structure.

This patch makes the fec_header packed.

Change-Id: Idb84453e70cc11abd5ef3a0adfbb16f8b5feaf06
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>

ANDROID: dm: android-verity: Verify header before fetching table

Move header validation logic before reading the verity_table as
an invalid header implies the table is invalid as well.

(Cherry-picked from:
https://partner-android-review.git.corp.google.com/#/c/625203)

BUG: 29940612
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: Ib34d25c0854202f3e70df0a6d0ef1d96f0250c8e

ANDROID: dm: allow adb disable-verity only in userdebug

adb disable-verity was allowed when the phone is in the
unlocked state. Since the driver is now aware of the build
variant, honor "adb disable-verity" only in userdebug
builds.

(Cherry-picked from
https://partner-android-review.git.corp.google.com/#/c/622117)

BUG: 29276559
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I7ce9f38d8c7a62361392c5a8ccebb288f8a3a2ea

ANDROID: dm: mount as linear target if eng build

eng builds dont have verity enabled i.e it does even
have verity metadata appended to the parition. Therefore
add rootdev as linear device and map the entire partition
if build variant is "eng".

(Cherry-picked based on
https://partner-android-review.git.corp.google.com/#/c/618690/)

BUG: 29276559
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I8f5c2289b842b820ca04f5773525e5449bb3f355

ANDROID: dm: use default verity public key

If the dm-android-verity target does not provide a default
key try using the default public key from the system keyring.
The defualt verity keyid is passed as a kernel command line
argument veritykeyid=.

The order of the dm-android-verity params have been reversed
to facilitate the change.

Old format example:
dm="system none ro,0 1 android-verity Android:#7e4333f9bba00adfe0ede979e28ed1920492b40f /dev/mmcblk0p43"

New formats supported:
dm="system none ro,0 1 android-verity /dev/mmcblk0p43 Android:#7e4333f9bba00adfe0ede979e28ed1920492b40f"

(or)

dm="system none ro,0 1 android-verity /dev/mmcblk0p43"
when veritykeyid= is set in the kernel command line.

BUG: 28384658
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I506c89b053d835ab579e703eef2bc1f8487250de
(cherry picked from commit c5c74d0327729f35b576564976885596c6d0e7fb)

ANDROID: dm: fix signature verification flag

The bug was that the signature verification was only
happening when verity was disabled. It should always
happen when verity is enabled.

Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I2d9354e240d36ea06fc68c2d18d8e87b823a4c2f
(cherry picked from commit 5364b5ca0b1a12a58283b51408e43fc36d4e4fe7)

ANDROID: dm: use name_to_dev_t

This patch makes android_verity_ctr() parse its block device string
parameter with name_to_dev_t(). It allows the use of less hardware
related block device reference like PARTUUID for instance.

Change-Id: Idb84453e70cc11abd5ef3a0adfbb16f8b5feaf07
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>

ANDROID: dm: rename dm-linear methods for dm-android-verity

This keeps linear_target as static variable and just exposes
the linear target methods for android-verity

Cherry-picked: https://android-review.googlesource.com/#/c/212858

Change-Id: I4a377e417b00afd9ecccdb3e605fea31a7df112e
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
(cherry picked from commit a6d1b091f40b25d97849487e29ec097bc5f568dd)

ANDROID: dm: Minor cleanup

Compacts the linear device arguments removing the
unnecessary variables.

Bug: 27175947
Change-Id: I157170eebe3c0f89a68ae05870a1060f188d0da0
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>

ANDROID: dm: Mounting root as linear device when verity disabled

This CL makes android-verity target to be added as linear
dm device if when bootloader is unlocked and verity is disabled.

Bug: 27175947
Change-Id: Ic41ca4b8908fb2777263799cf3a3e25934d70f18
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>

ANDROID: dm-android-verity: Rebase on top of 4.1

Following CLs in upstream causes minor changes to dm-android-verity target.
1. keys: change asymmetric keys to use common hash definitions
2. block: Abstract out bvec iterator
Rebase dm-android-verity on top of these changes.

Bug: 27175947

Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: Icfdc3e7b3ead5de335a059cade1aca70414db415

ANDROID: dm: Add android verity target

This device-mapper target is virtually a VERITY target. This
target is setup by reading the metadata contents piggybacked
to the actual data blocks in the block device. The signature
of the metadata contents are verified against the key included
in the system keyring. Upon success, the underlying verity
target is setup.

BUG: 27175947

Change-Id: I7e99644a0960ac8279f02c0158ed20999510ea97
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>

ANDROID: dm: fix dm_substitute_devices()

When candidate is the last parameter, candidate_end points to the '\0'
character and not the DM_FIELD_SEP character. In such a situation, we
should not move the candidate_end pointer one character backward.

Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>

ANDROID: dm: Rebase on top of 4.1

1. "dm: optimize use SRCU and RCU" removes the use of dm_table_put.
2. "dm: remove request-based logic from make_request_fn wrapper" necessitates
    calling dm_setup_md_queue or else the request_queue's make_request_fn
    pointer ends being unset.

[    7.711600] Internal error: Oops - bad mode: 0 [#1] PREEMPT SMP
[    7.717519] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W       4.1.15-02273-gb057d16-dirty #33
[    7.726559] Hardware name: HiKey Development Board (DT)
[    7.731779] task: ffffffc005f8acc0 ti: ffffffc005f8c000 task.ti: ffffffc005f8c000
[    7.739257] PC is at 0x0
[    7.741787] LR is at generic_make_request+0x8c/0x108
....
[    9.082931] Call trace:
[    9.085372] [<          (null)>]           (null)
[    9.090074] [<ffffffc0003f4ac0>] submit_bio+0x98/0x1e0
[    9.095212] [<ffffffc0001e2618>] _submit_bh+0x120/0x1f0
[    9.096165] cfg80211: Calling CRDA to update world regulatory domain
[    9.106781] [<ffffffc0001e5450>] __bread_gfp+0x94/0x114
[    9.112004] [<ffffffc00024a748>] ext4_fill_super+0x18c/0x2d64
[    9.117750] [<ffffffc0001b275c>] mount_bdev+0x194/0x1c0
[    9.122973] [<ffffffc0002450dc>] ext4_mount+0x14/0x1c
[    9.128021] [<ffffffc0001b29a0>] mount_fs+0x3c/0x194
[    9.132985] [<ffffffc0001d059c>] vfs_kern_mount+0x4c/0x134
[    9.138467] [<ffffffc0001d2168>] do_mount+0x204/0xbbc
[    9.143514] [<ffffffc0001d2ec4>] SyS_mount+0x94/0xe8
[    9.148479] [<ffffffc000c54074>] mount_block_root+0x120/0x24c
[    9.154222] [<ffffffc000c543e8>] mount_root+0x110/0x12c
[    9.159443] [<ffffffc000c54574>] prepare_namespace+0x170/0x1b8
[    9.165273] [<ffffffc000c53d98>] kernel_init_freeable+0x23c/0x260
[    9.171365] [<ffffffc0009b1748>] kernel_init+0x10/0x118
[    9.176589] Code: bad PC value
[    9.179807] ---[ end trace 75e1bc52ba364d13 ]---

Bug: 27175947

Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I952d86fd1475f0825f9be1386e3497b36127abd0

CHROMIUM: dm: boot time specification of dm=

This is a wrap-up of three patches pending upstream approval.
I'm bundling them because they are interdependent, and it'll be
easier to drop it on rebase later.

1. dm: allow a dm-fs-style device to be shared via dm-ioctl

Integrates feedback from Alisdair, Mike, and Kiyoshi.

Two main changes occur here:

- One function is added which allows for a programmatically created
mapped device to be inserted into the dm-ioctl hash table.  This binds
the device to a name and, optional, uuid which is needed by udev and
allows for userspace management of the mapped device.

- dm_table_complete() was extended to handle all of the final
functional changes required for the table to be operational once
called.

2. init: boot to device-mapper targets without an initr*

Add a dm= kernel parameter modeled after the md= parameter from
do_mounts_md.  It allows for device-mapper targets to be configured at
boot time for use early in the boot process (as the root device or
otherwise).  It also replaces /dev/XXX calls with major:minor opportunistically.

The format is dm="name uuid ro,table line 1,table line 2,...".  The
parser expects the comma to be safe to use as a newline substitute but,
otherwise, uses the normal separator of space.  Some attempt has been
made to make it forgiving of additional spaces (using skip_spaces()).

A mapped device created during boot will be assigned a minor of 0 and
may be access via /dev/dm-0.

An example dm-linear root with no uuid may look like:

root=/dev/dm-0  dm="lroot none ro, 0 4096 linear /dev/ubdb 0, 4096 4096 linear /dv/ubdc 0"

Once udev is started, /dev/dm-0 will become /dev/mapper/lroot.

Older upstream threads:
http://marc.info/?l=dm-devel&m=127429492521964&w=2
http://marc.info/?l=dm-devel&m=127429499422096&w=2
http://marc.info/?l=dm-devel&m=127429493922000&w=2

Latest upstream threads:
https://patchwork.kernel.org/patch/104859/
https://patchwork.kernel.org/patch/104860/
https://patchwork.kernel.org/patch/104861/

Bug: 27175947

Signed-off-by: Will Drewry <wad@chromium.org>
Review URL: http://codereview.chromium.org/2020011

Change-Id: I92bd53432a11241228d2e5ac89a3b20d19b05a31

UPSTREAM: net: Fix use after free in the recvmmsg exit path

(cherry picked from commit 34b88a68f26a75e4fded796f1a49c40f82234b7d)

The syzkaller fuzzer hit the following use-after-free:

  Call Trace:
   [<ffffffff8175ea0e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:295
   [<ffffffff851cc31a>] __sys_recvmmsg+0x6fa/0x7f0 net/socket.c:2261
   [<     inline     >] SYSC_recvmmsg net/socket.c:2281
   [<ffffffff851cc57f>] SyS_recvmmsg+0x16f/0x180 net/socket.c:2270
   [<ffffffff86332bb6>] entry_SYSCALL_64_fastpath+0x16/0x7a
  arch/x86/entry/entry_64.S:185

And, as Dmitry rightly assessed, that is because we can drop the
reference and then touch it when the underlying recvmsg calls return
some packets and then hit an error, which will make recvmmsg to set
sock->sk->sk_err, oops, fix it.

Reported-and-Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Fixes: a2e2725541fa ("net: Introduce recvmmsg socket syscall")
http://lkml.kernel.org/r/20160122211644.GC2470@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Change-Id: I2adb0faf595b7b634d9b739dfdd1a47109e20ecb
Bug: 30515201

Implement memory_state_time, used by qcom,cpubw

New driver memory_state_time tracks time spent in different DDR
frequency and bandwidth states.

Memory drivers such as qcom,cpubw can post updated state to the driver
after registering a callback. Processed by a workqueue

Bandwidth buckets are read in from device tree in the relevant qualcomm
section, can be defined in any quantity and spacing.

The data is exposed at /sys/kernel/memory_state_time, able to be read by
the Android framework.

Functionality is behind a config option CONFIG_MEMORY_STATE_TIME

Change-Id: I4fee165571cb975fb9eacbc9aada5e6d7dd748f0
Signed-off-by: James Carr <carrja@google.com>

Revert "panic: Add board ID to panic output"

This reverts commit 4e09c510185cb4db2277ce81cce81b7aa06bea45.

I checked for the usage of this debug helper in AOSP common kernels as
well as vendor kernels (e.g exynos, msm, mediatek, omap, tegra, x86,
x86_64) hosted at https://android.googlesource.com/kernel/ and I found
out that other than few fairly obsolete Omap trees (for tuna & Glass)
and Exynos tree (for Manta), there is no active user of this debug
helper. So we can safely remove this helper code.

Signed-off-by: Amit Pundir <amit.pundir@linaro.org>

usb: gadget: f_accessory: remove duplicate endpoint alloc

usb_ep_autoconfig is called twice for allocating
bulk out endpoint.

Removed the unwanted call.

Fixes Issue: 67180

Change-Id: I03e87a86fbbbc85831ff7f0496adf038d1de2956
Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>

BACKPORT: brcmfmac: defer DPC processing during probe

The sdio dpc starts processing when in SDIOD_STATE_DATA. This state was
entered right after firmware download. This patch moves that transition
just before enabling sdio interrupt handling thus avoiding watchdog
expiry which would put the bus to sleep while probing.

Change-Id: I09c60752374b8145da78000935062be08c5c8a52
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

FROMLIST: proc: Add LSM hook checks to /proc/<tid>/timerslack_ns

As requested, this patch checks the existing LSM hooks
task_getscheduler/task_setscheduler when reading or modifying
the task's timerslack value.

Previous versions added new get/settimerslack LSM hooks, but
since they checked the same PROCESS__SET/GETSCHED values as
existing hooks, it was suggested we just use the existing ones.

Cc: Kees Cook <keescook@chromium.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
CC: Arjan van de Ven <arjan@linux.intel.com>
Cc: Oren Laadan <orenl@cellrox.com>
Cc: Ruchi Kandoi <kandoiruchi@google.com>
Cc: Rom Lemarchand <romlem@android.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Colin Cross <ccross@android.com>
Cc: Nick Kralevich <nnk@google.com>
Cc: Dmitry Shmidt <dimitrysh@google.com>
Cc: Elliott Hughes <enh@google.com>
Cc: James Morris <jmorris@namei.org>
Cc: Android Kernel Team <kernel-team@android.com>
Cc: linux-security-module@vger.kernel.org
Cc: selinux@tycho.nsa.gov
Signed-off-by: John Stultz <john.stultz@linaro.org>
FROMLIST URL: https://lkml.org/lkml/2016/7/21/523
Change-Id: Id157d10e2fe0b85f1be45035a6117358a42af028
(Cherry picked back to common/android-4.4)
Signed-off-by: John Stultz <john.stultz@linaro.org>

FROMLIST: proc: Relax /proc/<tid>/timerslack_ns capability requirements

When an interface to allow a task to change another tasks
timerslack was first proposed, it was suggested that something
greater then CAP_SYS_NICE would be needed, as a task could be
delayed further then what normally could be done with nice
adjustments.

So CAP_SYS_PTRACE was adopted instead for what became the
/proc/<tid>/timerslack_ns interface. However, for Android (where
this feature originates), giving the system_server
CAP_SYS_PTRACE would allow it to observe and modify all tasks
memory. This is considered too high a privilege level for only
needing to change the timerslack.

After some discussion, it was realized that a CAP_SYS_NICE
process can set a task as SCHED_FIFO, so they could fork some
spinning processes and set them all SCHED_FIFO 99, in effect
delaying all other tasks for an infinite amount of time.

So as a CAP_SYS_NICE task can already cause trouble for other
tasks, using it as a required capability for accessing and
modifying /proc/<tid>/timerslack_ns seems sufficient.

Thus, this patch loosens the capability requirements to
CAP_SYS_NICE and removes CAP_SYS_PTRACE, simplifying some
of the code flow as well.

This is technically an ABI change, but as the feature just
landed in 4.6, I suspect no one is yet using it.

Cc: Kees Cook <keescook@chromium.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
CC: Arjan van de Ven <arjan@linux.intel.com>
Cc: Oren Laadan <orenl@cellrox.com>
Cc: Ruchi Kandoi <kandoiruchi@google.com>
Cc: Rom Lemarchand <romlem@android.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Colin Cross <ccross@android.com>
Cc: Nick Kralevich <nnk@google.com>
Cc: Dmitry Shmidt <dimitrysh@google.com>
Cc: Elliott Hughes <enh@google.com>
Cc: Android Kernel Team <kernel-team@android.com>
Reviewed-by: Nick Kralevich <nnk@google.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
FROMLIST URL: https://lkml.org/lkml/2016/7/21/522
Change-Id: Ia75481402e3948165a1b7c1551c539530cb25509
(Cherry picked against common/android-4.4)
Signed-off-by: John Stultz <john.stultz@linaro.org>

UPSTREAM: sched: panic on corrupted stack end

(cherry picked from commit 29d6455178a09e1dc340380c582b13356227e8df)

Until now, hitting this BUG_ON caused a recursive oops (because oops
handling involves do_exit(), which calls into the scheduler, which in
turn raises an oops), which caused stuff below the stack to be
overwritten until a panic happened (e.g. via an oops in interrupt
context, caused by the overwritten CPU index in the thread_info).

Just panic directly.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change-Id: Ia3acb3f747f7a58ec2d071644433b0591925969f
Bug: 29444228

UPSTREAM: ecryptfs: forbid opening files without mmap handler

(cherry picked from commit 2f36db71009304b3f0b95afacd8eba1f9f046b87)

This prevents users from triggering a stack overflow through a recursive
invocation of pagefault handling that involves mapping procfs files into
virtual memory.

Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Tyler Hicks <tyhicks@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change-Id: I0be77c7f8bd3046bc34cd87ef577529792d479bc
Bug: 29444228

UPSTREAM: proc: prevent stacking filesystems on top

(cherry picked from commit e54ad7f1ee263ffa5a2de9c609d58dfa27b21cd9)

This prevents stacking filesystems (ecryptfs and overlayfs) from using
procfs as lower filesystem. There is too much magic going on inside
procfs, and there is no good reason to stack stuff on top of procfs.

(For example, procfs does access checks in VFS open handlers, and
ecryptfs by design calls open handlers from a kernel thread that doesn't
drop privileges or so.)

Signed-off-by: Jann Horn <jannh@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change-Id: Ib050ef9dc10e623589d22e3a9e6aee9ee4f0cd5d
Bug: 29444228

UPSTREAM: ppp: defer netns reference release for ppp channel

(cherry pick from commit 205e1e255c479f3fd77446415706463b282f94e4)

Matt reported that we have a NULL pointer dereference
in ppp_pernet() from ppp_connect_channel(),
i.e. pch->chan_net is NULL.

This is due to that a parallel ppp_unregister_channel()
could happen while we are in ppp_connect_channel(), during
which pch->chan_net set to NULL. Since we need a reference
to net per channel, it makes sense to sync the refcnt
with the life time of the channel, therefore we should
release this reference when we destroy it.

Fixes: 1f461dcdd296 ("ppp: take reference on channels netns")
Reported-by: Matt Bennett <Matt.Bennett@alliedtelesis.co.nz>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-ppp@vger.kernel.org
Cc: Guillaume Nault <g.nault@alphalink.fr>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: Change-Id: Iee0015eca5bd181954bb4896a3720f7549c5ed0b ("UPSTREAM:
ppp: take reference on channels netns")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Change-Id: I24d0bb6f349ab3829f63cfe935ed97b6913a3508

cpuset: Add allow_attach hook for cpusets on android.

This patch provides a allow_attach hook for cpusets,
which resolves lots of the following logcat noise.

W SchedPolicy: add_tid_to_cgroup failed to write '2816' (Permission denied); fd=29
W ActivityManager: Failed setting process group of 2816 to 0
W System.err: java.lang.IllegalArgumentException
W System.err:    at android.os.Process.setProcessGroup(Native Method)
W System.err:    at com.android.server.am.ActivityManagerService.applyOomAdjLocked(ActivityManagerService.java:18763)
W System.err:    at com.android.server.am.ActivityManagerService.updateOomAdjLocked(ActivityManagerService.java:19028)
W System.err:    at com.android.server.am.ActivityManagerService.updateOomAdjLocked(ActivityManagerService.java:19106)
W System.err:    at com.android.server.am.ActiveServices.serviceDoneExecutingLocked(ActiveServices.java:2015)
W System.err:    at com.android.server.am.ActiveServices.publishServiceLocked(ActiveServices.java:905)
W System.err:    at com.android.server.am.ActivityManagerService.publishService(ActivityManagerService.java:16065)
W System.err:    at android.app.ActivityManagerNative.onTransact(ActivityManagerNative.java:1007)
W System.err:    at com.android.server.am.ActivityManagerService.onTransact(ActivityManagerService.java:2493)
W System.err:    at android.os.Binder.execTransact(Binder.java:453)

Change-Id: Ic1b61b2bbb7ce74c9e9422b5e22ee9078251de21
[Ported to 4.4, added commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>

Revert "CHROMIUM: android: binder: Fix potential scheduling-while-atomic"

This reverts commit 71b1886054473597c46a8a25c95477b5262971b5.

Change-Id: I9ded0ff43535c1367c2cf79dfeec20d4b5f0357a

CHROMIUM: android: binder: Fix potential scheduling-while-atomic

(cherry picked from commit 166b45af97359159f9585a836c9849e725e31fd6)

Commit f1e7f0a724f6 ("android: binder: Disable preemption while holding
the global binder lock.") re-enabled preemption around most of the sites
where calls to potentially sleeping functions were made, but missed
__alloc_fd(), which can sleep if the fdtable needs to be resized.
Re-enable preemption around __alloc_fd() as well as __fd_install() which
can now sleep in upstream kernels as of commit 8a81252b774b ("fs/file.c:
don't acquire files->file_lock in fd_install()").

BUG=chrome-os-partner:44012
TEST=Build and boot on Smaug.

Change-Id: I9819c4b95876f697e75b1b84810b6c520d9c33ec
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/308582
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Riley Andrews <riandrews@google.com>
Bug: 30141999

UPSTREAM: netfilter: x_tables: make sure e->next_offset covers remaining blob size

(cherry pick from commit 6e94e0cfb0887e4013b3b930fa6ab1fe6bb6ba91)

Otherwise this function may read data beyond the ruleset blob.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Change-Id: I9d19ecf3e00a2d52817b35b9042623927895c005
Bug: 29637687

UPSTREAM: netfilter: x_tables: validate e->target_offset early

(cherry pick from commit bdf533de6968e9686df777dc178486f600c6e617)

We should check that e->target_offset is sane before
mark_source_chains gets called since it will fetch the target entry
for loop detection.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Change-Id: Ic2dbc31c9525d698e94d4d8875886acf3524abbd
Bug: 29637687

UPSTREAM: KEYS: potential uninitialized variable

(cherry picked from commit 38327424b40bcebe2de92d07312c89360ac9229a)

If __key_link_begin() failed then "edit" would be uninitialized.  I've
added a check to fix that.

This allows a random user to crash the kernel, though it's quite
difficult to achieve.  There are three ways it can be done as the user
would have to cause an error to occur in __key_link():

(1) Cause the kernel to run out of memory.  In practice, this is difficult
     to achieve without ENOMEM cropping up elsewhere and aborting the
     attempt.

(2) Revoke the destination keyring between the keyring ID being looked up
     and it being tested for revocation.  In practice, this is difficult to
     time correctly because the KEYCTL_REJECT function can only be used
     from the request-key upcall process.  Further, users can only make use
     of what's in /sbin/request-key.conf, though this does including a
     rejection debugging test - which means that the destination keyring
     has to be the caller's session keyring in practice.

(3) Have just enough key quota available to create a key, a new session
     keyring for the upcall and a link in the session keyring, but not then
     sufficient quota to create a link in the nominated destination keyring
     so that it fails with EDQUOT.

The bug can be triggered using option (3) above using something like the
following:

echo 80 >/proc/sys/kernel/keys/root_maxbytes
keyctl request2 user debug:fred negate @t

The above sets the quota to something much lower (80) to make the bug
easier to trigger, but this is dependent on the system.  Note also that
the name of the keyring created contains a random number that may be
between 1 and 10 characters in size, so may throw the test off by
changing the amount of quota used.

Assuming the failure occurs, something like the following will be seen:

kfree_debugcheck: out of range ptr 6b6b6b6b6b6b6b68h
------------[ cut here ]------------
kernel BUG at ../mm/slab.c:2821!
...
RIP: 0010:[<ffffffff811600f9>] kfree_debugcheck+0x20/0x25
RSP: 0018:ffff8804014a7de8  EFLAGS: 00010092
RAX: 0000000000000034 RBX: 6b6b6b6b6b6b6b68 RCX: 0000000000000000
RDX: 0000000000040001 RSI: 00000000000000f6 RDI: 0000000000000300
RBP: ffff8804014a7df0 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8804014a7e68 R11: 0000000000000054 R12: 0000000000000202
R13: ffffffff81318a66 R14: 0000000000000000 R15: 0000000000000001
...
Call Trace:
  kfree+0xde/0x1bc
  assoc_array_cancel_edit+0x1f/0x36
  __key_link_end+0x55/0x63
  key_reject_and_link+0x124/0x155
  keyctl_reject_key+0xb6/0xe0
  keyctl_negate_key+0x10/0x12
  SyS_keyctl+0x9f/0xe7
  do_syscall_64+0x63/0x13a
  entry_SYSCALL64_slow_path+0x25/0x25

Fixes: f70e2e06196a ('KEYS: Do preallocation for __key_link()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change-Id: Ia9616cce142a616beea0ef20bde49129939d2d2d
Bug: 29823941

UPSTREAM: KEYS: Fix ASN.1 indefinite length object parsing

(cherry pick from commit 23c8a812dc3c621009e4f0e5342aa4e2ede1ceaa)

This fixes CVE-2016-0758.

In the ASN.1 decoder, when the length field of an ASN.1 value is extracted,
it isn't validated against the remaining amount of data before being added
to the cursor.  With a sufficiently large size indicated, the check:

datalen - dp < 2

may then fail due to integer overflow.

Fix this by checking the length indicated against the amount of remaining
data in both places a definite length is determined.

Whilst we're at it, make the following changes:

(1) Check the maximum size of extended length does not exceed the capacity
     of the variable it's being stored in (len) rather than the type that
     variable is assumed to be (size_t).

(2) Compare the EOC tag to the symbolic constant ASN1_EOC rather than the
     integer 0.

(3) To reduce confusion, move the initialisation of len outside of:

for (len = 0; n > 0; n--) {

     since it doesn't have anything to do with the loop counter n.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Peter Jones <pjones@redhat.com>
Change-Id: If760bc3b8ab0e59fefc24fa687514324348fb8e8
Bug: 29814470

UPSTREAM: ppp: take reference on channels netns

(cherry pick from commit 1f461dcdd296eecedaffffc6bae2bfa90bd7eb89)

Let channels hold a reference on their network namespace.
Some channel types, like ppp_async and ppp_synctty, can have their
userspace controller running in a different namespace. Therefore they
can't rely on them to preclude their netns from being removed from
under them.

==================================================================
BUG: KASAN: use-after-free in ppp_unregister_channel+0x372/0x3a0 at
addr ffff880064e217e0
Read of size 8 by task syz-executor/11581
=============================================================================
BUG net_namespace (Not tainted): kasan: bad access detected
-----------------------------------------------------------------------------

Disabling lock debugging due to kernel taint
INFO: Allocated in copy_net_ns+0x6b/0x1a0 age=92569 cpu=3 pid=6906
[<      none      >] ___slab_alloc+0x4c7/0x500 kernel/mm/slub.c:2440
[<      none      >] __slab_alloc+0x4c/0x90 kernel/mm/slub.c:2469
[<     inline     >] slab_alloc_node kernel/mm/slub.c:2532
[<     inline     >] slab_alloc kernel/mm/slub.c:2574
[<      none      >] kmem_cache_alloc+0x23a/0x2b0 kernel/mm/slub.c:2579
[<     inline     >] kmem_cache_zalloc kernel/include/linux/slab.h:597
[<     inline     >] net_alloc kernel/net/core/net_namespace.c:325
[<      none      >] copy_net_ns+0x6b/0x1a0 kernel/net/core/net_namespace.c:360
[<      none      >] create_new_namespaces+0x2f6/0x610 kernel/kernel/nsproxy.c:95
[<      none      >] copy_namespaces+0x297/0x320 kernel/kernel/nsproxy.c:150
[<      none      >] copy_process.part.35+0x1bf4/0x5760 kernel/kernel/fork.c:1451
[<     inline     >] copy_process kernel/kernel/fork.c:1274
[<      none      >] _do_fork+0x1bc/0xcb0 kernel/kernel/fork.c:1723
[<     inline     >] SYSC_clone kernel/kernel/fork.c:1832
[<      none      >] SyS_clone+0x37/0x50 kernel/kernel/fork.c:1826
[<      none      >] entry_SYSCALL_64_fastpath+0x16/0x7a kernel/arch/x86/entry/entry_64.S:185

INFO: Freed in net_drop_ns+0x67/0x80 age=575 cpu=2 pid=2631
[<      none      >] __slab_free+0x1fc/0x320 kernel/mm/slub.c:2650
[<     inline     >] slab_free kernel/mm/slub.c:2805
[<      none      >] kmem_cache_free+0x2a0/0x330 kernel/mm/slub.c:2814
[<     inline     >] net_free kernel/net/core/net_namespace.c:341
[<      none      >] net_drop_ns+0x67/0x80 kernel/net/core/net_namespace.c:348
[<      none      >] cleanup_net+0x4e5/0x600 kernel/net/core/net_namespace.c:448
[<      none      >] process_one_work+0x794/0x1440 kernel/kernel/workqueue.c:2036
[<      none      >] worker_thread+0xdb/0xfc0 kernel/kernel/workqueue.c:2170
[<      none      >] kthread+0x23f/0x2d0 kernel/drivers/block/aoe/aoecmd.c:1303
[<      none      >] ret_from_fork+0x3f/0x70 kernel/arch/x86/entry/entry_64.S:468
INFO: Slab 0xffffea0001938800 objects=3 used=0 fp=0xffff880064e20000
flags=0x5fffc0000004080
INFO: Object 0xffff880064e20000 @offset=0 fp=0xffff880064e24200

CPU: 1 PID: 11581 Comm: syz-executor Tainted: G    B           4.4.0+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
00000000ffffffff ffff8800662c7790 ffffffff8292049d ffff88003e36a300
ffff880064e20000 ffff880064e20000 ffff8800662c77c0 ffffffff816f2054
ffff88003e36a300 ffffea0001938800 ffff880064e20000 0000000000000000
Call Trace:
[<     inline     >] __dump_stack kernel/lib/dump_stack.c:15
[<ffffffff8292049d>] dump_stack+0x6f/0xa2 kernel/lib/dump_stack.c:50
[<ffffffff816f2054>] print_trailer+0xf4/0x150 kernel/mm/slub.c:654
[<ffffffff816f875f>] object_err+0x2f/0x40 kernel/mm/slub.c:661
[<     inline     >] print_address_description kernel/mm/kasan/report.c:138
[<ffffffff816fb0c5>] kasan_report_error+0x215/0x530 kernel/mm/kasan/report.c:236
[<     inline     >] kasan_report kernel/mm/kasan/report.c:259
[<ffffffff816fb4de>] __asan_report_load8_noabort+0x3e/0x40 kernel/mm/kasan/report.c:280
[<     inline     >] ? ppp_pernet kernel/include/linux/compiler.h:218
[<ffffffff83ad71b2>] ? ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
[<     inline     >] ppp_pernet kernel/include/linux/compiler.h:218
[<ffffffff83ad71b2>] ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
[<     inline     >] ? ppp_pernet kernel/drivers/net/ppp/ppp_generic.c:293
[<ffffffff83ad6f26>] ? ppp_unregister_channel+0xe6/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
[<ffffffff83ae18f3>] ppp_asynctty_close+0xa3/0x130 kernel/drivers/net/ppp/ppp_async.c:241
[<ffffffff83ae1850>] ? async_lcp_peek+0x5b0/0x5b0 kernel/drivers/net/ppp/ppp_async.c:1000
[<ffffffff82c33239>] tty_ldisc_close.isra.1+0x99/0xe0 kernel/drivers/tty/tty_ldisc.c:478
[<ffffffff82c332c0>] tty_ldisc_kill+0x40/0x170 kernel/drivers/tty/tty_ldisc.c:744
[<ffffffff82c34943>] tty_ldisc_release+0x1b3/0x260 kernel/drivers/tty/tty_ldisc.c:772
[<ffffffff82c1ef21>] tty_release+0xac1/0x13e0 kernel/drivers/tty/tty_io.c:1901
[<ffffffff82c1e460>] ? release_tty+0x320/0x320 kernel/drivers/tty/tty_io.c:1688
[<ffffffff8174de36>] __fput+0x236/0x780 kernel/fs/file_table.c:208
[<ffffffff8174e405>] ____fput+0x15/0x20 kernel/fs/file_table.c:244
[<ffffffff813595ab>] task_work_run+0x16b/0x200 kernel/kernel/task_work.c:115
[<     inline     >] exit_task_work kernel/include/linux/task_work.h:21
[<ffffffff81307105>] do_exit+0x8b5/0x2c60 kernel/kernel/exit.c:750
[<ffffffff813fdd20>] ? debug_check_no_locks_freed+0x290/0x290 kernel/kernel/locking/lockdep.c:4123
[<ffffffff81306850>] ? mm_update_next_owner+0x6f0/0x6f0 kernel/kernel/exit.c:357
[<ffffffff813215e6>] ? __dequeue_signal+0x136/0x470 kernel/kernel/signal.c:550
[<ffffffff8132067b>] ? recalc_sigpending_tsk+0x13b/0x180 kernel/kernel/signal.c:145
[<ffffffff81309628>] do_group_exit+0x108/0x330 kernel/kernel/exit.c:880
[<ffffffff8132b9d4>] get_signal+0x5e4/0x14f0 kernel/kernel/signal.c:2307
[<     inline     >] ? kretprobe_table_lock kernel/kernel/kprobes.c:1113
[<ffffffff8151d355>] ? kprobe_flush_task+0xb5/0x450 kernel/kernel/kprobes.c:1158
[<ffffffff8115f7d3>] do_signal+0x83/0x1c90 kernel/arch/x86/kernel/signal.c:712
[<ffffffff8151d2a0>] ? recycle_rp_inst+0x310/0x310 kernel/include/linux/list.h:655
[<ffffffff8115f750>] ? setup_sigcontext+0x780/0x780 kernel/arch/x86/kernel/signal.c:165
[<ffffffff81380864>] ? finish_task_switch+0x424/0x5f0 kernel/kernel/sched/core.c:2692
[<     inline     >] ? finish_lock_switch kernel/kernel/sched/sched.h:1099
[<ffffffff81380560>] ? finish_task_switch+0x120/0x5f0 kernel/kernel/sched/core.c:2678
[<     inline     >] ? context_switch kernel/kernel/sched/core.c:2807
[<ffffffff85d794e9>] ? __schedule+0x919/0x1bd0 kernel/kernel/sched/core.c:3283
[<ffffffff81003901>] exit_to_usermode_loop+0xf1/0x1a0 kernel/arch/x86/entry/common.c:247
[<     inline     >] prepare_exit_to_usermode kernel/arch/x86/entry/common.c:282
[<ffffffff810062ef>] syscall_return_slowpath+0x19f/0x210 kernel/arch/x86/entry/common.c:344
[<ffffffff85d88022>] int_ret_from_sys_call+0x25/0x9f kernel/arch/x86/entry/entry_64.S:281
Memory state around the buggy address:
ffff880064e21680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff880064e21700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff880064e21780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                       ^
ffff880064e21800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff880064e21880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Fixes: 273ec51dd7ce ("net: ppp_generic - introduce net-namespace functionality v2")
Reported-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change-Id: Iee0015eca5bd181954bb4896a3720f7549c5ed0b
Bug: 28979703

UPSTREAM: netfilter: x_tables: fix unconditional helper

(cherry pick from commit 54d83fc74aa9ec72794373cb47432c5f7fb1a309)

Ben Hawkes says:

In the mark_source_chains function (net/ipv4/netfilter/ip_tables.c) it
is possible for a user-supplied ipt_entry structure to have a large
next_offset field. This field is not bounds checked prior to writing a
counter value at the supplied offset.

Problem is that mark_source_chains should not have been called --
the rule doesn't have a next entry, so its supposed to return
an absolute verdict of either ACCEPT or DROP.

However, the function conditional() doesn't work as the name implies.
It only checks that the rule is using wildcard address matching.

However, an unconditional rule must also not be using any matches
(no -m args).

The underflow validator only checked the addresses, therefore
passing the 'unconditional absolute verdict' test, while
mark_source_chains also tested for presence of matches, and thus
proceeeded to the next (not-existent) rule.

Unify this so that all the callers have same idea of 'unconditional rule'.

Reported-by: Ben Hawkes <hawkes@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Change-Id: I47ec0713ac563ac244200c7b2c54f09a91aceabc
Bug: 28940694

ANDROID: sdcardfs: fix itnull.cocci warnings

List_for_each_entry has the property that the first argument is always
bound to a real list element, never NULL, so testing dentry is not needed.

Generated by: scripts/coccinelle/iterators/itnull.cocci

Cc: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Guenter Roeck <groeck@chromium.org>

android-recommended.cfg: enable fstack-protector-strong

If compiler has stack protector support, set
CONFIG_CC_STACKPROTECTOR_STRONG.

Bug: 28967314
Change-Id: I588c2d544250e9e4b5082b43c237b8f85b7313ca
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>

sdcardfs: Truncate packages_gid.list on overflow

packages_gid.list was improperly returning the wrong
count. Use scnprintf instead, and inform the user that
the list was truncated if it is.

Bug: 30013843
Change-Id: Ida2b2ef7cd86dd87300bfb4c2cdb6bfe2ee1650d
Signed-off-by: Daniel Rosenberg <drosen@google.com>

UPSTREAM: cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind

(cherry pick from commit 4d06dd537f95683aba3651098ae288b7cbff8274)

usbnet_link_change will call schedule_work and should be
avoided if bind is failing. Otherwise we will end up with
scheduled work referring to a netdev which has gone away.

Instead of making the call conditional, we can just defer
it to usbnet_probe, using the driver_info flag made for
this purpose.

Fixes: 8a34b0ae8778 ("usbnet: cdc_ncm: apply usbnet_link_change")
Reported-by: Andrey Konovalov <andreyknvl@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change-Id: Id9a6d02bdd98bf495d26595cf2cc90e480746186
Bug: 28744625

BACKPORT: ptrace: use fsuid, fsgid, effective creds for fs access checks

This patch backports 969624b (which backports caaee6234d0 upstream),
from the v4.4-stable branch to the common/android-4.4 branch.

This patch is needed to provide the PTRACE_MODE_ATTACH_FSCREDS definition
which was used by the backported version of proc/<tid>/timerslack_ns
in change-id: Ie5799b9a3402a31f88cd46437dcda4a0e46415a7

commit caaee6234d05a58c5b4d05e7bf766131b810a657 upstream.

By checking the effective credentials instead of the real UID / permitted
capabilities, ensure that the calling process actually intended to use its
credentials.

To ensure that all ptrace checks use the correct caller credentials (e.g.
in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS
flag), use two new flags and require one of them to be set.

The problem was that when a privileged task had temporarily dropped its
privileges, e.g.  by calling setreuid(0, user_uid), with the intent to
perform following syscalls with the credentials of a user, it still passed
ptrace access checks that the user would not be able to pass.

While an attacker should not be able to convince the privileged task to
perform a ptrace() syscall, this is a problem because the ptrace access
check is reused for things in procfs.

In particular, the following somewhat interesting procfs entries only rely
on ptrace access checks:

/proc/$pid/stat - uses the check for determining whether pointers
     should be visible, useful for bypassing ASLR
/proc/$pid/maps - also useful for bypassing ASLR
/proc/$pid/cwd - useful for gaining access to restricted
     directories that contain files with lax permissions, e.g. in
     this scenario:
     lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar
     drwx------ root root /root
     drwxr-xr-x root root /root/foobar
     -rw-r--r-- root root /root/foobar/secret

Therefore, on a system where a root-owned mode 6755 binary changes its
effective credentials as described and then dumps a user-specified file,
this could be used by an attacker to reveal the memory layout of root's
processes or reveal the contents of files he is not allowed to access
(through /proc/$pid/cwd).

[akpm@linux-foundation.org: fix warning]
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[jstultz: Cherry-picked for common/android-4.4]
Signed-off-by: John Stultz <john.stultz@linaro.org>

BACKPORT: proc: add /proc/<pid>/timerslack_ns interface

This backports 5de23d435e88996b1efe0e2cebe242074ce67c9e

This patch provides a proc/PID/timerslack_ns interface which exposes a
task's timerslack value in nanoseconds and allows it to be changed.

This allows power/performance management software to set timer slack for
other threads according to its policy for the thread (such as when the
thread is designated foreground vs. background activity)

If the value written is non-zero, slack is set to that value. Otherwise
sets it to the default for the thread.

This interface checks that the calling task has permissions to to use
PTRACE_MODE_ATTACH_FSCREDS on the target task, so that we can ensure
arbitrary apps do not change the timer slack for other apps.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oren Laadan <orenl@cellrox.com>
Cc: Ruchi Kandoi <kandoiruchi@google.com>
Cc: Rom Lemarchand <romlem@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

BACKPORT: timer: convert timer_slack_ns from unsigned long to u64

This backports da8b44d5a9f8bf26da637b7336508ca534d6b319 from upstream.

This patchset introduces a /proc/<pid>/timerslack_ns interface which
would allow controlling processes to be able to set the timerslack value
on other processes in order to save power by avoiding wakeups (Something
Android currently does via out-of-tree patches).

The first patch tries to fix the internal timer_slack_ns usage which was
defined as a long, which limits the slack range to ~4 seconds on 32bit
systems.  It converts it to a u64, which provides the same basically
unlimited slack (500 years) on both 32bit and 64bit machines.

The second patch introduces the /proc/<pid>/timerslack_ns interface
which allows the full 64bit slack range for a task to be read or set on
both 32bit and 64bit machines.

With these two patches, on a 32bit machine, after setting the slack on
bash to 10 seconds:

$ time sleep 1

real    0m10.747s
user    0m0.001s
sys     0m0.005s

The first patch is a little ugly, since I had to chase the slack delta
arguments through a number of functions converting them to u64s.  Let me
know if it makes sense to break that up more or not.

Other than that things are fairly straightforward.

This patch (of 2):

The timer_slack_ns value in the task struct is currently a unsigned
long.  This means that on 32bit applications, the maximum slack is just
over 4 seconds.  However, on 64bit machines, its much much larger (~500
years).

This disparity could make application development a little (as well as
the default_slack) to a u64.  This means both 32bit and 64bit systems
have the same effective internal slack range.

Now the existing ABI via PR_GET_TIMERSLACK and PR_SET_TIMERSLACK specify
the interface as a unsigned long, so we preserve that limitation on
32bit systems, where SET_TIMERSLACK can only set the slack to a unsigned
long value, and GET_TIMERSLACK will return ULONG_MAX if the slack is
actually larger then what can be stored by an unsigned long.

This patch also modifies hrtimer functions which specified the slack
delta as a unsigned long.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oren Laadan <orenl@cellrox.com>
Cc: Ruchi Kandoi <kandoiruchi@google.com>
Cc: Rom Lemarchand <romlem@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

netfilter: xt_quota2: make quota2_log work well

In upstream commit 7200135bc1e61f1437dc326ae2ef2f310c50b4eb
(netfilter: kill ulog targets)
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=7200135bc1e6

ipt_ULOG target was removed, meanwhile, the IP_NF_TARGET_ULOG Kconfig
and ipt_ULOG.h header file were removed too. This causes we cannot enable
QUOTA2_LOG, and netd complains this error: "Unable to open quota socket".
So when we reach the quota2 limit, userspace will not be notified with
this event.

Since IP_NF_TARGET_ULOG was removed, we need not depend on
"IP_NF_TARGET_ULOG=n", and for compatibility, add ulog_packet_msg_t
related definitions copied from "ipt_ULOG.h".

Change-Id: I38132efaabf52bea75dfd736ce734a1b9690e87e
Reported-by: Samboo Shen <samboo.shen@spreadtrum.com>
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>

Revert "usb: gadget: prevent change of Host MAC address of 'usb0' interface"

This reverts commit 265801537d110eb68d44a2f66015479908f635c0.

Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>

BACKPORT: PM / sleep: Go direct_complete if driver has no callbacks

Backport notes: This resolves clk warnings in the designware i2c
driver on HiKey seen during suspend/resume.

Cherrypicked from: aa8e54b559479d0cb7eb632ba443b8cacd20cd4b

If a suitable prepare callback cannot be found for a given device and
its driver has no PM callbacks at all, assume that it can go direct to
complete when the system goes to sleep.

The reason for this is that there's lots of devices in a system that do
no PM at all and there's no reason for them to prevent their ancestors
to do direct_complete if they can support it.

Change-Id: Ia773afb4b266f012336b99fc8cf87453839e078b
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[jstultz: Backported to 4.4]
Signed-off-by: John Stultz <john.stultz@linaro.org>

ANDROID: base-cfg: enable UID_CPUTIME

Enabled UID_CPUTIME and dependent PROFILING config option.

UID_CPUTIME (/proc/uid_cputime) interfaces provide amount of time a
UID's processes spent executing in user-space and kernel-space. It is
used by batterystats service.

Signed-off-by: Amit Pundir <amit.pundir@linaro.org>

UPSTREAM: USB: usbfs: fix potential infoleak in devio

(cherry pick from commit 681fef8380eb818c0b845fca5d2ab1dcbab114ee)

The stack object “ci” has a total size of 8 bytes. Its last 3 bytes
are padding bytes which are not initialized and leaked to userland
via “copy_to_user”.

Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bug: 28619695
Change-Id: I170754d659d0891c075f85211b5e3970b114f097

UPSTREAM: ALSA: timer: Fix leak in events via snd_timer_user_ccallback

(cherry pick from commit 9a47e9cff994f37f7f0dbd9ae23740d0f64f9fe6)

The stack object “r1” has a total size of 32 bytes. Its field
“event” and “val” both contain 4 bytes padding. These 8 bytes
padding bytes are sent to user without being initialized.

Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Bug: 28980217
Change-Id: I2e4c27352894b9f1f4c808b8db3ae5f9284faec1

UPSTREAM: ALSA: timer: Fix leak in events via snd_timer_user_tinterrupt

(cherry pick from commit e4ec8cc8039a7063e24204299b462bd1383184a5)

The stack object “r1” has a total size of 32 bytes. Its field
“event” and “val” both contain 4 bytes padding. These 8 bytes
padding bytes are sent to user without being initialized.

Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Bug: 28980217
Change-Id: If2bba3c9ffb4e57190583b0bb2524d3b2514b2a3

UPSTREAM: ALSA: timer: Fix leak in SNDRV_TIMER_IOCTL_PARAMS

(cherry pick from commit cec8f96e49d9be372fdb0c3836dcf31ec71e457e)

The stack object “tread” has a total size of 32 bytes. Its field
“event” and “val” both contain 4 bytes padding. These 8 bytes
padding bytes are sent to user without being initialized.

Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Bug: 28980557
Change-Id: Ibda2d126f6d72fedf797a98796c3cde7bb03db76

UPSTREAM: net: fix infoleak in rtnetlink

(cherry pick from commit 5f8e44741f9f216e33736ea4ec65ca9ac03036e6)

The stack object “map” has a total size of 32 bytes. Its last 4
bytes are padding generated by compiler. These padding bytes are
not initialized and sent out via “nla_put”.

Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bug: 28620102
Change-Id: Ica015c6a90d47e9188b1cd87a280ac6819dd9d09

ANDROID: configs: remove unused configs

Remove following configs which no longer exist:

CONFIG_IP6_NF_TARGET_REJECT_SKERR
CONFIG_IP_NF_TARGET_REJECT_SKERR
CONFIG_RESOURCE_COUNTERS
CONFIG_TABLET_USB_WACOM

Signed-off-by: Amit Pundir <amit.pundir@linaro.org>

ANDROID: cpu: send KOBJ_ONLINE event when enabling cpus

In case some sysfs nodes needs to be labeled with a different label than
sysfs then user needs to be notified when a core is brought back online.

Signed-off-by: Thierry Strudel <tstrudel@google.com>
Bug: 29359497
Change-Id: I0395c86e01cd49c348fda8f93087d26f88557c91

UPSTREAM: usbnet: cleanup after bind() in probe()

(cherry pick from commit 1666984c8625b3db19a9abc298931d35ab7bc64b)

In case bind() works, but a later error forces bailing
in probe() in error cases work and a timer may be scheduled.
They must be killed. This fixes an error case related to
the double free reported in
http://www.spinics.net/lists/netdev/msg367669.html
and needs to go on top of Linus' fix to cdc-ncm.

Signed-off-by: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bug: 28744625

ANDROID: dm verity fec: initialize recursion level

Explicitly initialize recursion level to zero at the beginning of each
I/O operation.

Bug: 28943429
Change-Id: I00c612be2b8c22dd5afb65a739551df91cb324fc
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
(cherry picked from commit 32ffb3a22d7fd269b2961323478ece92c06a8334)

ANDROID: dm verity fec: fix RS block calculation

A call to do_div was changed in Linux 4.5 to div64_u64 in
verity_fec_decode, which broke RS block calculation due to
incompatible semantics. This change fixes the computation.

Bug: 21893453
Change-Id: Idb88b901e0209c2cccc9c0796689f780592d58f9
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
(cherry picked from commit 879aac93eebcc2862d71afa9eca3a0c0f51b3b01)

ANDROID: dm verity fec: add missing release from fec_ktype

Add a release function to allow destroying the dm-verity device.

Bug: 27928374
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Change-Id: Ic0f7c17e4889c5580d70b52d9a709a37165a5747
(cherry picked from commit 0039ccf47c8f99888f7b71b2a36a68a027fbe357)