OSDN Git Service
Neil Armstrong [Tue, 10 Nov 2015 15:51:19 +0000 (16:51 +0100)]
net: dsa: mv88e6060: use the correct InitReady bit
According to the mv88e6060 datasheet, the InitReady bit position
is 11 and the polarity is inverted.
Use the bit correctly to detect the end of initialization.
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Armstrong [Tue, 10 Nov 2015 15:51:14 +0000 (16:51 +0100)]
net: dsa: mv88e6060: remove poll_link callback
As of mv88e6xxx remove the poll_link callback since the link
state change polling is now handled by the phylib.
Tested on a mv88e6060 B0 device with a TI DM816X SoC.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 15 Nov 2015 23:43:47 +0000 (18:43 -0500)]
Merge branch 'mellanox-net-fixes'
Or Gerlitz says:
====================
Mellanox NIC driver update, Nov 12, 2015
Few small mlx5 and mlx4 fixes from the team... done over
net commit
c5a3788 "Merge branch 'akpm' (patches from Andrew)"
Eran's patch needs to go to 4.2 and 4.3 stable kernels.
Tariq's patch need to go to 4.3 stable too.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Noa Osherovich [Thu, 12 Nov 2015 17:35:30 +0000 (19:35 +0200)]
net/mlx4_core: Avoid returning success in case of an error flow
The err variable wasn't set with the correct error value in some cases.
Fixes:
47605df95398 ('mlx4: Modify proxy/tunnel QP mechanism [..]')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Thu, 12 Nov 2015 17:35:29 +0000 (19:35 +0200)]
net/mlx4_core: Fix sleeping while holding spinlock at rem_slave_counters
When cleaning slave's counter resources, we hold a spinlock that
protects the slave's counters list. As part of the clean, we call
__mlx4_clear_if_stat which calls mlx4_alloc_cmd_mailbox which is a
sleepable function.
In order to fix this issue, hold the spinlock, and copy all counter
indices into a temporary array, and release the spinlock. Afterwards,
iterate over this array and free every counter. Repeat this scenario
until the original list is empty (a new counter might have been added
while releasing the counters from the temporary array).
Fixes:
b72ca7e96acf ("net/mlx4_core: Reset counters data when freed")
Reported-by: Moni Shoua <monis@mellanox.com>
Tested-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Achiad Shochat [Thu, 12 Nov 2015 17:35:28 +0000 (19:35 +0200)]
net/mlx5e: Use the right DMA free function on TX path
On xmit path we use skb_frag_dma_map() which is using dma_map_page(),
while upon completion we dma-unmap the skb fragments using
dma_unmap_single() rather than dma_unmap_page().
To fix this, we now save the dma map type on xmit path and use this
info to call the right dma unmap method upon TX completion.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Doron Tsur [Thu, 12 Nov 2015 17:35:27 +0000 (19:35 +0200)]
net/mlx5e: Max mtu comparison fix
On change mtu the driver compares between hardware queried mtu and
software requested mtu. We need to compare between software
representation of the queried mtu and the requested mtu.
Fixes:
facc9699f0fe ('net/mlx5e: Fix HW MTU settings')
Signed-off-by: Doron Tsur <doront@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Thu, 12 Nov 2015 17:35:26 +0000 (19:35 +0200)]
net/mlx5e: Added self loopback prevention
Prevent outgoing multicast frames from looping back to the RX queue.
By introducing new HW capability self_lb_en_modifiable, which indicates
the support to modify self_lb_en bit in modify_tir command.
When this capability is set we can prevent TIRs from sending back
loopback multicast traffic to their own RQs, by "refreshing TIRs" with
modify_tir command, on every time new channels (SQs/RQs) are created at
device open.
This is needed since TIRs are static and only allocated once on driver
load, and the loopback decision is under their responsibility.
Fixes issues of the kind:
"IPv6: eth2: IPv6 duplicate address fe80::e61d:2dff:fe5c:f2e9 detected!"
The issue is seen since the IPv6 solicitations multicast messages are
loopedback and the network stack thinks they are coming from another host.
Fixes:
5c50368f3831 ("net/mlx5e: Light-weight netdev open/stop")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed [Thu, 12 Nov 2015 17:35:25 +0000 (19:35 +0200)]
net/mlx5e: Fix inline header size calculation
mlx5e_get_inline_hdr_size didn't take into account the vlan insertion
into the inline WQE segment.
This could lead to max inline violation in cases where
skb_headlen(skb) + VLAN_HLEN >= sq->max_inline.
Fixes:
3ea4891db8d0 ("net/mlx5e: Fix LSO vlan insertion")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 12 Nov 2015 17:14:12 +0000 (09:14 -0800)]
ipvs: use skb_to_full_sk() helper
SYNACK packets might be attached to request sockets.
Use skb_to_full_sk() helper to avoid illegal accesses to
inet_sk(skb->sk)
Fixes:
ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 12 Nov 2015 16:43:18 +0000 (08:43 -0800)]
tcp: ensure proper barriers in lockless contexts
Some functions access TCP sockets without holding a lock and
might output non consistent data, depending on compiler and or
architecture.
tcp_diag_get_info(), tcp_get_info(), tcp_poll(), get_tcp4_sock() ...
Introduce sk_state_load() and sk_state_store() to fix the issues,
and more clearly document where this lack of locking is happening.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Fedin [Thu, 12 Nov 2015 11:55:18 +0000 (14:55 +0300)]
net: thunder: Fix crash upon shutdown after failed probe
If device probe fails, driver remains bound to the PCI device. However,
driver data has been reset to NULL. This causes crash upon dereferencing
it in nicvf_remove()
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
lucien [Thu, 12 Nov 2015 05:07:07 +0000 (13:07 +0800)]
sctp: translate host order to network order when setting a hmacid
now sctp auth cannot work well when setting a hmacid manually, which
is caused by that we didn't use the network order for hmacid, so fix
it by adding the transformation in sctp_auth_ep_set_hmacs.
even we set hmacid with the network order in userspace, it still
can't work, because of this condition in sctp_auth_ep_set_hmacs():
if (id > SCTP_AUTH_HMAC_ID_MAX)
return -EOPNOTSUPP;
so this wasn't working before and thus it won't break compatibility.
Fixes:
65b07e5d0d09 ("[SCTP]: API updates to suport SCTP-AUTH extensions.")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 15 Nov 2015 23:00:48 +0000 (18:00 -0500)]
Merge branch 'packet-fixes'
Daniel Borkmann says:
====================
packet fixes
Fixes a couple of issues in packet sockets, i.e. on TX ring side. See
individual patches for details.
v2 -> v3:
- First two patches unchanged, kept Jason's Ack
- Reworked 3rd patch and split into 3:
- check for dev type as discussed with Willem
- infer skb->protocol
- fix max len for dgram
v1 -> v2:
- Added patch 2 as suggested by Dave
- Rest is unchanged from previous submission
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 11 Nov 2015 22:25:44 +0000 (23:25 +0100)]
packet: fix tpacket_snd max frame len
Since it's introduction in commit
69e3c75f4d54 ("net: TX_RING and
packet mmap"), TX_RING could be used from SOCK_DGRAM and SOCK_RAW
side. When used with SOCK_DGRAM only, the size_max > dev->mtu +
reserve check should have reserve as 0, but currently, this is
unconditionally set (in it's original form as dev->hard_header_len).
I think this is not correct since tpacket_fill_skb() would then
take dev->mtu and dev->hard_header_len into account for SOCK_DGRAM,
the extra VLAN_HLEN could be possible in both cases. Presumably, the
reserve code was copied from packet_snd(), but later on missed the
check. Make it similar as we have it in packet_snd().
Fixes:
69e3c75f4d54 ("net: TX_RING and packet mmap")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 11 Nov 2015 22:25:43 +0000 (23:25 +0100)]
packet: infer protocol from ethernet header if unset
In case no struct sockaddr_ll has been passed to packet
socket's sendmsg() when doing a TX_RING flush run, then
skb->protocol is set to po->num instead, which is the protocol
passed via socket(2)/bind(2).
Applications only xmitting can go the path of allocating the
socket as socket(PF_PACKET, <mode>, 0) and do a bind(2) on the
TX_RING with sll_protocol of 0. That way, register_prot_hook()
is neither called on creation nor on bind time, which saves
cycles when there's no interest in capturing anyway.
That leaves us however with po->num 0 instead and therefore
the TX_RING flush run sets skb->protocol to 0 as well. Eric
reported that this leads to problems when using tools like
trafgen over bonding device. I.e. the bonding's hash function
could invoke the kernel's flow dissector, which depends on
skb->protocol being properly set. In the current situation, all
the traffic is then directed to a single slave.
Fix it up by inferring skb->protocol from the Ethernet header
when not set and we have ARPHRD_ETHER device type. This is only
done in case of SOCK_RAW and where we have a dev->hard_header_len
length. In case of ARPHRD_ETHER devices, this is guaranteed to
cover ETH_HLEN, and therefore being accessed on the skb after
the skb_store_bits().
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 11 Nov 2015 22:25:42 +0000 (23:25 +0100)]
packet: only allow extra vlan len on ethernet devices
Packet sockets can be used by various net devices and are not
really restricted to ARPHRD_ETHER device types. However, when
currently checking for the extra 4 bytes that can be transmitted
in VLAN case, our assumption is that we generally probe on
ARPHRD_ETHER devices. Therefore, before looking into Ethernet
header, check the device type first.
This also fixes the issue where non-ARPHRD_ETHER devices could
have no dev->hard_header_len in TX_RING SOCK_RAW case, and thus
the check would test unfilled linear part of the skb (instead
of non-linear).
Fixes:
57f89bfa2140 ("network: Allow af_packet to transmit +4 bytes for VLAN packets.")
Fixes:
52f1454f629f ("packet: allow to transmit +4 byte in TX_RING slot for VLAN case")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 11 Nov 2015 22:25:41 +0000 (23:25 +0100)]
packet: always probe for transport header
We concluded that the skb_probe_transport_header() should better be
called unconditionally. Avoiding the call into the flow dissector has
also not really much to do with the direct xmit mode.
While it seems that only virtio_net code makes use of GSO from non
RX/TX ring packet socket paths, we should probe for a transport header
nevertheless before they hit devices.
Reference: http://thread.gmane.org/gmane.linux.network/386173/
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 11 Nov 2015 22:25:40 +0000 (23:25 +0100)]
packet: do skb_probe_transport_header when we actually have data
In tpacket_fill_skb() commit
c1aad275b029 ("packet: set transport
header before doing xmit") and later on
40893fd0fd4e ("net: switch
to use skb_probe_transport_header()") was probing for a transport
header on the skb from a ring buffer slot, but at a time, where
the skb has _not even_ been filled with data yet. So that call into
the flow dissector is pretty useless. Lets do it after we've set
up the skb frags.
Fixes:
c1aad275b029 ("packet: set transport header before doing xmit")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kamal Mostafa [Wed, 11 Nov 2015 22:24:27 +0000 (14:24 -0800)]
tools/net: Use include/uapi with __EXPORTED_HEADERS__
Use the local uapi headers to keep in sync with "recently" added #define's
(e.g. SKF_AD_VLAN_TPID). Refactored CFLAGS, and bpf_asm doesn't need -I.
Fixes:
3f356385e8a4 ("filter: bpf_asm: add minimal bpf asm tool")
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 15 Nov 2015 22:15:50 +0000 (17:15 -0500)]
Merge branch 'ipv6-route-fixes'
Martin KaFai Lau says:
====================
ipv6: Fixes for pmtu update and DST_NOCACHE route
This patchset fixes:
1. An oops during IPv6 pmtu update on a IPv4 GRE running
in an IPSec setup
2. Misc fixes on DST_NOCACHE route
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin KaFai Lau [Wed, 11 Nov 2015 19:51:08 +0000 (11:51 -0800)]
ipv6: Check rt->dst.from for the DST_NOCACHE route
All DST_NOCACHE rt6_info used to have rt->dst.from set to
its parent.
After commit
8e3d5be73681 ("ipv6: Avoid double dst_free"),
DST_NOCACHE is also set to rt6_info which does not have
a parent (i.e. rt->dst.from is NULL).
This patch catches the rt->dst.from == NULL case.
Fixes:
8e3d5be73681 ("ipv6: Avoid double dst_free")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin KaFai Lau [Wed, 11 Nov 2015 19:51:07 +0000 (11:51 -0800)]
ipv6: Check expire on DST_NOCACHE route
Since the expires of the DST_NOCACHE rt can be set during
the ip6_rt_update_pmtu(), we also need to consider the expires
value when doing ip6_dst_check().
This patches creates __rt6_check_expired() to only
check the expire value (if one exists) of the current rt.
In rt6_dst_from_check(), it adds __rt6_check_expired() as
one of the condition check.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin KaFai Lau [Wed, 11 Nov 2015 19:51:06 +0000 (11:51 -0800)]
ipv6: Avoid creating RTF_CACHE from a rt that is not managed by fib6 tree
The original bug report:
https://bugzilla.redhat.com/show_bug.cgi?id=
1272571
The setup has a IPv4 GRE tunnel running in a IPSec. The bug
happens when ndisc starts sending router solicitation at the gre
interface. The simplified oops stack is like:
__lock_acquire+0x1b2/0x1c30
lock_acquire+0xb9/0x140
_raw_write_lock_bh+0x3f/0x50
__ip6_ins_rt+0x2e/0x60
ip6_ins_rt+0x49/0x50
~~~~~~~~
__ip6_rt_update_pmtu.part.54+0x145/0x250
ip6_rt_update_pmtu+0x2e/0x40
~~~~~~~~
ip_tunnel_xmit+0x1f1/0xf40
__gre_xmit+0x7a/0x90
ipgre_xmit+0x15a/0x220
dev_hard_start_xmit+0x2bd/0x480
__dev_queue_xmit+0x696/0x730
dev_queue_xmit+0x10/0x20
neigh_direct_output+0x11/0x20
ip6_finish_output2+0x21f/0x770
ip6_finish_output+0xa7/0x1d0
ip6_output+0x56/0x190
~~~~~~~~
ndisc_send_skb+0x1d9/0x400
ndisc_send_rs+0x88/0xc0
~~~~~~~~
The rt passed to ip6_rt_update_pmtu() is created by
icmp6_dst_alloc() and it is not managed by the fib6 tree,
so its rt6i_table == NULL. When __ip6_rt_update_pmtu() creates
a RTF_CACHE clone, the newly created clone also has rt6i_table == NULL
and it causes the ip6_ins_rt() oops.
During pmtu update, we only want to create a RTF_CACHE clone
from a rt which is currently managed (or owned) by the
fib6 tree. It means either rt->rt6i_node != NULL or
rt is a RTF_PCPU clone.
It is worth to note that rt6i_table may not be NULL even it is
not (yet) managed by the fib6 tree (e.g. addrconf_dst_alloc()).
Hence, rt6i_node is a better check instead of rt6i_table.
Fixes:
45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reported-by: Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu>
Cc: Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Wed, 11 Nov 2015 15:22:40 +0000 (15:22 +0000)]
fjes: fix inconsistent indenting
minor change, indenting is one tab out.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hannes Frederic Sowa [Tue, 10 Nov 2015 15:23:15 +0000 (16:23 +0100)]
af-unix: fix use-after-free with concurrent readers while splicing
During splicing an af-unix socket to a pipe we have to drop all
af-unix socket locks. While doing so we allow another reader to enter
unix_stream_read_generic which can read, copy and finally free another
skb. If exactly this skb is just in process of being spliced we get a
use-after-free report by kasan.
First, we must make sure to not have a free while the skb is used during
the splice operation. We simply increment its use counter before unlocking
the reader lock.
Stream sockets have the nice characteristic that we don't care about
zero length writes and they never reach the peer socket's queue. That
said, we can take the UNIXCB.consumed field as the indicator if the
skb was already freed from the socket's receive queue. If the skb was
fully consumed after we locked the reader side again we know it has been
dropped by a second reader. We indicate a short read to user space and
abort the current splice operation.
This bug has been found with syzkaller
(http://github.com/google/syzkaller) by Dmitry Vyukov.
Fixes:
2b514574f7e8 ("net: af_unix: implement splice for stream af_unix sockets")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Thu, 12 Nov 2015 21:03:40 +0000 (22:03 +0100)]
stmmac: avoid ipq806x constant overflow warning
Building dwmac-ipq806x on a 64-bit architecture produces a harmless
warning from gcc:
stmmac/dwmac-ipq806x.c: In function 'ipq806x_gmac_probe':
include/linux/bitops.h:6:19: warning: overflow in implicit constant conversion [-Woverflow]
val = QSGMII_PHY_CDR_EN |
stmmac/dwmac-ipq806x.c:333:8: note: in expansion of macro 'QSGMII_PHY_CDR_EN'
#define QSGMII_PHY_CDR_EN BIT(0)
#define BIT(nr) (1UL << (nr))
This is a result of the type conversion rules in C, when we take the
logical OR of multiple different types. In particular, we have
and unsigned long
QSGMII_PHY_CDR_EN == BIT(0) == (1ul << 0) == 0x0000000000000001ul
and a signed int
0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET == 0xc0000000
which together gives a signed long value
0xffffffffc0000001l
and when this is passed into a function that takes an unsigned int type,
gcc warns about the signed overflow and the loss of the upper 32-bits that
are all ones.
This patch adds 'ul' type modifiers to the literal numbers passed in
here, so now the expression remains an 'unsigned long' with the upper
bits all zero, and that avoids the signed overflow and the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes:
b1c17215d718 ("stmmac: add ipq806x glue layer")
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 12 Nov 2015 19:17:16 +0000 (14:17 -0500)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree. This
large batch that includes fixes for ipset, netfilter ingress, nf_tables
dynamic set instantiation and a longstanding Kconfig dependency problem.
More specifically, they are:
1) Add missing check for empty hook list at the ingress hook, from
Florian Westphal.
2) Input and output interface are swapped at the ingress hook,
reported by Patrick McHardy.
3) Resolve ipset extension alignment issues on ARM, patch from Jozsef
Kadlecsik.
4) Fix bit check on bitmap in ipset hash type, also from Jozsef.
5) Release buckets when all entries have expired in ipset hash type,
again from Jozsef.
6) Oneliner to initialize conntrack tuple object in the PPTP helper,
otherwise the conntrack lookup may fail due to random bits in the
structure holes, patch from Anthony Lineham.
7) Silence a bogus gcc warning in nfnetlink_log, from Arnd Bergmann.
8) Fix Kconfig dependency problems with TPROXY, socket and dup, also
from Arnd.
9) Add __netdev_alloc_pcpu_stats() to allow creating percpu counters
from atomic context, this is required by the follow up fix for
nf_tables.
10) Fix crash from the dynamic set expression, we have to add new clone
operation that should be defined when a simple memcpy is not enough.
This resolves a crash when using per-cpu counters with new Patrick
McHardy's flow table nft support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
françois romieu [Wed, 11 Nov 2015 22:35:18 +0000 (23:35 +0100)]
r8169: fix kasan reported skb use-after-free.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Fixes:
d7d2d89d4b0af ("r8169: Add software counter for multicast packages")
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 11 Nov 2015 05:14:23 +0000 (21:14 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge final patch-bomb from Andrew Morton:
"Various leftovers, mainly Christoph's pci_dma_supported() removals"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
pci: remove pci_dma_supported
usbnet: remove ifdefed out call to dma_supported
kaweth: remove ifdefed out call to dma_supported
sfc: don't call dma_supported
nouveau: don't call pci_dma_supported
netup_unidvb: use pci_set_dma_mask insted of pci_dma_supported
cx23885: use pci_set_dma_mask insted of pci_dma_supported
cx25821: use pci_set_dma_mask insted of pci_dma_supported
cx88: use pci_set_dma_mask insted of pci_dma_supported
saa7134: use pci_set_dma_mask insted of pci_dma_supported
saa7164: use pci_set_dma_mask insted of pci_dma_supported
tw68-core: use pci_set_dma_mask insted of pci_dma_supported
pcnet32: use pci_set_dma_mask insted of pci_dma_supported
lib/string.c: add ULL suffix to the constant definition
hugetlb: trivial comment fix
selftests/mlock2: add ULL suffix to 64-bit constants
selftests/mlock2: add missing #define _GNU_SOURCE
Linus Torvalds [Wed, 11 Nov 2015 05:11:58 +0000 (21:11 -0800)]
Merge branch 'misc' of git://git./linux/kernel/git/mmarek/kbuild
Pull misc kbuild updates from Michal Marek:
"This is the non-critical part of kbuild:
- several coccinelle updates
- make deb-pkg creates an armhf package if CONFIG_VFP=y
- make tags understands some more powerpc macros"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
coccinelle: Improve checking for missing NULL terminators
coccinelle: ifnullfree: handle various destroy functions
coccinelle: ifnullfree: various cleanups
cocinelle: iterators: semantic patch to delete unneeded of_node_put
deb-pkg: Add automatic support for armhf architecture
scripts/coccinelle: fix typos
coccinelle: misc: remove "complex return code" warnings
Coccinelle: fix incorrect -include option transformation
coccinelle: tests: improve odd_ptr_err.cocci
coccinelle: misc: move constants to the right
scripts/tags.sh: Teach tags about some powerpc macros
Linus Torvalds [Wed, 11 Nov 2015 05:06:50 +0000 (21:06 -0800)]
Merge branch 'kconfig' of git://git./linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek:
- 'make xconfig' ported to Qt5, dropping support for Qt3
- merge_config.sh supports a single-input-file mode and also respects
$KCONFIG_CONFIG
- Fix for incorrect display of >= and > in dependency expressions
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (44 commits)
Add current selection check.
Use pkg-config to find Qt 4 and 5 instead of direct qmake
kconfig: Fix copy&paste error
kconfig/merge_config.sh: Accept a single file
kconfig/merge_config.sh: Support KCONFIG_CONFIG
Update the buildsystem for KConfig finding Qt
Port xconfig to Qt5 - Update copyright.
Port xconfig to Qt5 - Fix goParent issue.
Port xconfig to Qt5 - on Back clicked, deselect old item.
Port xconfig to Qt5 - Add(back) one click checkbox toggle.
Port xconfig to Qt5 - Add(back) lineedit editing.
Port xconfig to Qt5 - Remove some commented code.
Port xconfig to Qt5 - Source format.
Port xconfig to Qt5 - Add horizontal scrollbar, and scroll per pixel.
Port xconfig to Qt5 - Change ConfigItem constructor parent type.
Port xconfig to Qt5 - Disable ConfigList soring
Port xconfig to Qt5 - Remove ConfigList::updateMenuList template.
Port xconfig to Qt5 - Add ConfigList::mode to initializer list.
Port xconfig to Qt5 - Add ConfigItem::nextItem to initializer list.
Port xconfig to Qt5 - Tree widget set column titles.
...
Linus Torvalds [Wed, 11 Nov 2015 04:55:37 +0000 (20:55 -0800)]
Merge branch 'kbuild' of git://git./linux/kernel/git/mmarek/kbuild
Pull kbuild update from Michal Marek:
"The kbuild branch for v4.4-rc1 only has one commit: A new make
kselftest-clean target cleans tools/testing/selftests"
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kselftest: add kselftest-clean rule
Linus Torvalds [Wed, 11 Nov 2015 04:46:45 +0000 (20:46 -0800)]
Merge tag 'linux-kselftest-4.4-rc1' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"This 12 patch update for 4.4-rc1 consists of a new pstore test and
fixes to existing tests"
* tag 'linux-kselftest-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: breakpoint: Actually build it
selftests: vm: Try harder to allocate huge pages
selftests: Make scripts executable
selftests: kprobe: Choose an always-defined function to probe
selftests: memfd: Stop unnecessary rebuilds
selftests: Add missing #include directives
selftests/seccomp: Be more precise with syscall arguments.
selftests/seccomp: build and pass on arm64
selftests: memfd_test: Revised STACK_SIZE to make it 16-byte aligned
selftests/pstore: add pstore test scripts going with reboot
selftests/pstore: add pstore test script for pre-reboot
selftests: add .gitignore for efivarfs
Linus Torvalds [Wed, 11 Nov 2015 04:37:28 +0000 (20:37 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Two build fixes, one for VC4, one for nouveau where the ARM only code
is doing something a bit strange. While people are discussing that,
just workaround it and fix the build for now. The code in question
will never get used on anything non-ARM anyways.
Also one fix for AST that SuSE had been hiding in their kernel, that
allows all fbdev apps to work on that driver"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: fix build failures on all non ARM.
drm/ast: Initialized data needed to map fbdev memory
drm/vc4: Add dependency on HAVE_DMA_ATTRS, and select DRM_GEM_CMA_HELPER
Dave Airlie [Mon, 9 Nov 2015 22:36:59 +0000 (08:36 +1000)]
drm/nouveau: fix build failures on all non ARM.
gk20a is an ARM only GPU, so we can just do the correct thing on
ARM but fail on other architectures. The other option was to use
SWIOTLB as the define, which means phys_to_page exists, but
this seems clearer.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Egbert Eich [Wed, 11 Jun 2014 12:59:55 +0000 (14:59 +0200)]
drm/ast: Initialized data needed to map fbdev memory
Due to a missing initialization there was no way to map fbdev memory.
Thus for example using the Xserver with the fbdev driver failed.
This fix adds initialization for fix.smem_start and fix.smem_len
in the fb_info structure, which fixes this problem.
Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: stable@vger.kernel.org
Signed-off-by: Egbert Eich <eich@suse.de>
[pulled from SuSE tree by me - airlied]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Wed, 11 Nov 2015 02:11:41 +0000 (18:11 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix null deref in xt_TEE netfilter module, from Eric Dumazet.
2) Several spots need to get to the original listner for SYN-ACK
packets, most spots got this ok but some were not. Whilst covering
the remaining cases, create a helper to do this. From Eric Dumazet.
3) Missiing check of return value from alloc_netdev() in CAIF SPI code,
from Rasmus Villemoes.
4) Don't sleep while != TASK_RUNNING in macvtap, from Vlad Yasevich.
5) Use after free in mvneta driver, from Justin Maggard.
6) Fix race on dst->flags access in dst_release(), from Eric Dumazet.
7) Add missing ZLIB_INFLATE dependency for new qed driver. From Arnd
Bergmann.
8) Fix multicast getsockopt deadlock, from WANG Cong.
9) Fix deadlock in btusb, from Kuba Pawlak.
10) Some ipv6_add_dev() failure paths were not cleaning up the SNMP6
counter state. From Sabrina Dubroca.
11) Fix packet_bind() race, which can cause lost notifications, from
Francesco Ruggeri.
12) Fix MAC restoration in qlcnic driver during bonding mode changes,
from Jarod Wilson.
13) Revert bridging forward delay change which broke libvirt and other
userspace things, from Vlad Yasevich.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
Revert "bridge: Allow forward delay to be cfgd when STP enabled"
bpf_trace: Make dependent on PERF_EVENTS
qed: select ZLIB_INFLATE
net: fix a race in dst_release()
net: mvneta: Fix memory use after free.
net: Documentation: Fix default value tcp_limit_output_bytes
macvtap: Resolve possible __might_sleep warning in macvtap_do_read()
mvneta: add FIXED_PHY dependency
net: caif: check return value of alloc_netdev
net: hisilicon: NET_VENDOR_HISILICON should depend on HAS_DMA
drivers: net: xgene: fix RGMII 10/100Mb mode
netfilter: nft_meta: use skb_to_full_sk() helper
net_sched: em_meta: use skb_to_full_sk() helper
sched: cls_flow: use skb_to_full_sk() helper
netfilter: xt_owner: use skb_to_full_sk() helper
smack: use skb_to_full_sk() helper
net: add skb_to_full_sk() helper and use it in selinux_netlbl_skbuff_setsid()
bpf: doc: correct arch list for supported eBPF JIT
dwc_eth_qos: Delete an unnecessary check before the function call "of_node_put"
bonding: fix panic on non-ARPHRD_ETHER enslave failure
...
Linus Torvalds [Wed, 11 Nov 2015 01:23:49 +0000 (17:23 -0800)]
Merge branch 'for-4.4/io-poll' of git://git.kernel.dk/linux-block
Pull block IO poll support from Jens Axboe:
"Various groups have been doing experimentation around IO polling for
(really) fast devices. The code has been reviewed and has been
sitting on the side for a few releases, but this is now good enough
for coordinated benchmarking and further experimentation.
Currently O_DIRECT sync read/write are supported. A framework is in
the works that allows scalable stats tracking so we can auto-tune
this. And we'll add libaio support as well soon. Fow now, it's an
opt-in feature for test purposes"
* 'for-4.4/io-poll' of git://git.kernel.dk/linux-block:
direct-io: be sure to assign dio->bio_bdev for both paths
directio: add block polling support
NVMe: add blk polling support
block: add block polling support
blk-mq: return tag/queue combo in the make_request_fn handlers
block: change ->make_request_fn() and users to return a queue cookie
Linus Torvalds [Wed, 11 Nov 2015 00:35:06 +0000 (16:35 -0800)]
Merge tag 'upstream-4.4-rc1' of git://git.infradead.org/linux-ubifs
Pull UBI/UBIFS updates from Richard Weinberger:
- access time support for UBIFS by Dongsheng Yang
- random cleanups and bug fixes all over the place
* tag 'upstream-4.4-rc1' of git://git.infradead.org/linux-ubifs:
ubifs: introduce UBIFS_ATIME_SUPPORT to ubifs
ubifs: make ubifs_[get|set]xattr atomic
UBIFS: Delete unnecessary checks before the function call "iput"
UBI: Remove in vain semicolon
UBI: Fastmap: Fix PEB array type
UBIFS: Fix possible memory leak in ubifs_readdir()
fs/ubifs: remove unnecessary new_valid_dev check
ubi: fastmap: Implement produce_free_peb()
UBIFS: print verbose message when rescanning a corrupted node
UBIFS: call dbg_is_power_cut() instead of reading c->dbg->pc_happened
UBI: drop null test before destroy functions
UBI: Update comments to reflect UBI_METAONLY flag
UBI: Fix debug message
UBI: Fix typo in comment
UBI: Fastmap: Simplify expression
UBIFS: fix a typo in comment of ubifs_budget_req
UBIFS: use kmemdup rather than duplicating its implementation
Linus Torvalds [Wed, 11 Nov 2015 00:33:37 +0000 (16:33 -0800)]
Merge branch 'for-linus-4.4-rc1' of git://git./linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- a new hrtimer based clocksource by Anton Ivanov
- ptrace() enhancments by Richard Weinberger
- random cleanups and bug fixes all over the place
* 'for-linus-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Switch clocksource to hrtimers
um: net: replace GFP_KERNEL with GFP_ATOMIC when spinlock is held
um: Report host OOM more nicely
um: Simplify STUB_DATA loading
um: Remove dead symbol from i386 syscall stub
um: Remove dead code from x86_64 syscall stub
um: Get rid of open coded NR_SYSCALLS
um: Store syscall number after syscall_trace_enter()
um: Define PTRACE_OLDSETOPTIONS
Christoph Hellwig [Tue, 10 Nov 2015 22:45:50 +0000 (14:45 -0800)]
pci: remove pci_dma_supported
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Tue, 10 Nov 2015 22:45:47 +0000 (14:45 -0800)]
usbnet: remove ifdefed out call to dma_supported
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Tue, 10 Nov 2015 22:45:44 +0000 (14:45 -0800)]
kaweth: remove ifdefed out call to dma_supported
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Tue, 10 Nov 2015 22:45:42 +0000 (14:45 -0800)]
sfc: don't call dma_supported
dma_set_mask already checks for a supported DMA mask before updating it,
the call to dma_supported is redundant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
Cc: Shradha Shah <sshah@solarflare.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Tue, 10 Nov 2015 22:45:39 +0000 (14:45 -0800)]
nouveau: don't call pci_dma_supported
Just try to set a 64-bit DMA mask first and retry with the smaller dma_mask
if dma_set_mask failed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Tue, 10 Nov 2015 22:45:36 +0000 (14:45 -0800)]
netup_unidvb: use pci_set_dma_mask insted of pci_dma_supported
This ensures the dma mask that is supported by the driver is recorded
in the device structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Sergey Kozlov <serjk@netup.ru>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Tue, 10 Nov 2015 22:45:33 +0000 (14:45 -0800)]
cx23885: use pci_set_dma_mask insted of pci_dma_supported
This ensures the dma mask that is supported by the driver is recorded
in the device structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Tue, 10 Nov 2015 22:45:31 +0000 (14:45 -0800)]
cx25821: use pci_set_dma_mask insted of pci_dma_supported
This ensures the dma mask that is supported by the driver is recorded
in the device structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Tue, 10 Nov 2015 22:45:28 +0000 (14:45 -0800)]
cx88: use pci_set_dma_mask insted of pci_dma_supported
This ensures the dma mask that is supported by the driver is recorded
in the device structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Tue, 10 Nov 2015 22:45:25 +0000 (14:45 -0800)]
saa7134: use pci_set_dma_mask insted of pci_dma_supported
This ensures the dma mask that is supported by the driver is recorded
in the device structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Tue, 10 Nov 2015 22:45:23 +0000 (14:45 -0800)]
saa7164: use pci_set_dma_mask insted of pci_dma_supported
This ensures the dma mask that is supported by the driver is recorded
in the device structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Tue, 10 Nov 2015 22:45:20 +0000 (14:45 -0800)]
tw68-core: use pci_set_dma_mask insted of pci_dma_supported
This ensures the dma mask that is supported by the driver is recorded
in the device structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Tue, 10 Nov 2015 22:45:17 +0000 (14:45 -0800)]
pcnet32: use pci_set_dma_mask insted of pci_dma_supported
All drivers should be using dma_set_mask / pci_set_dma_mask to try to
set the dma mask instead of just querying it. Without that some iommu
implementations may not work.
pci_dma_supported is removed entirely, but dma_supported stays for
dma_ops implementations for now.
This patch (of 15):
This ensures the dma mask that is supported by the driver is recorded
in the device structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Don Fry <pcnet32@frontier.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Helge Deller <deller@gmx.de>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Sergey Kozlov <serjk@netup.ru>
Cc: Shradha Shah <sshah@solarflare.com>
Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
Cc: Steven Toth <stoth@kernellabs.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Tue, 10 Nov 2015 22:45:14 +0000 (14:45 -0800)]
lib/string.c: add ULL suffix to the constant definition
8-byte constant is too big for long and compiler complains about this.
lib/string.c:907:20: warning: constant 0x0101010101010101 is so big it is long
Append ULL suffix to explicitly show its type.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Naoya Horiguchi [Tue, 10 Nov 2015 22:45:11 +0000 (14:45 -0800)]
hugetlb: trivial comment fix
Recently alloc_buddy_huge_page() was renamed to __alloc_buddy_huge_page(),
so let's sync comments.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert Uytterhoeven [Tue, 10 Nov 2015 22:45:09 +0000 (14:45 -0800)]
selftests/mlock2: add ULL suffix to 64-bit constants
On 32-bit (e.g. m68k):
mlock2-tests.c: In function 'lock_check':
mlock2-tests.c:293: warning: integer constant is too large for 'long' type
mlock2-tests.c:294: warning: integer constant is too large for 'long' type
mlock2-tests.c:299: warning: integer constant is too large for 'long' type
...
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Eric B Munson <emunson@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geert Uytterhoeven [Tue, 10 Nov 2015 22:45:06 +0000 (14:45 -0800)]
selftests/mlock2: add missing #define _GNU_SOURCE
On glibc 2.3.6:
mlock2-tests.c: In function 'seek_to_smaps_entry':
mlock2-tests.c:158: warning: implicit declaration of function 'getline'
According to the manpage of getline(), it needs _GNU_SOURCE before glibc
2.10.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Eric B Munson <emunson@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 11 Nov 2015 00:24:25 +0000 (16:24 -0800)]
Merge tag 'metag-for-v4.4' of git://git./linux/kernel/git/jhogan/metag
Pull metag arch updates from James Hogan:
"A fix for 4KiB stacks with SMP, and a change of maintenance status to
'Odd Fixes'"
* tag 'metag-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
MAINTAINERS: Change Meta arch port status to Odd Fixes
metag: Turn irq_ctx_* macros into static inlines
metag: SMP: Fix 4KiB stack setup on secondary CPUs
Linus Torvalds [Tue, 10 Nov 2015 23:08:32 +0000 (15:08 -0800)]
Merge tag 'armsoc-defconfig' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Defconfig updates are kept separate from other branches mostly to
avoid conflicts between the different categories (driver branch
enabling something that has context conflict with SoC options, etc).
A lot of this again is scattered across the various hardware
platforms. multi_v7_defconfig, our "generic" config for most 32-bit
platforms has been gone through by Marvell Berlin maintainers and
added most options they need to run on their hardware. Broadcom NSP
is also added there, and the new Atmel SAMA5D2 (added last release).
Rockchip also has display and other devices supported in that config.
In addition to that, the usual small churn of new options being added
here and there"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
ARM: multi_v7_defconfig: enable UniPhier I2C drivers
ARM: multi_v7_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4
ARM: exynos_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4
ARM: exynos_defconfig: Enable WiFi-Ex as a module instead built-in
ARM: exynos_defconfig: Disable simplefb support
ARM: exynos_defconfig: Enable LEDS for Odroid-XU3/XU4
ARM: multi_v7_defconfig: Enable DWC2 USB driver and USB ethernet gadget
ARM: exynos_defconfig: Enable DWC2 USB driver and USB ethernet gadget
ARM: exynos_defconfig: Enable USB Video Class support
ARM: multi_v7_defconfig: improve multi_v7_defconfig support for Berlin
ARM: tegra: Update multi_v7_defconfig
ARM: multi_v7_defconfig: Add Atmel SDHCI device
ARM: multi_v7_defconfig: Add Atmel Flexcom device
ARM: multi_v7_defconfig: Add Atmel SAMA5D2 SoC
ARM: at91/defconfig: add sama5d2 and its new devices to sama5 defconfig
ARM: at91/defconfig: update at91_dt defconfig
ARM: at91/defconfig: update sama5 defconfig
ARM: configs: Enable FIXED_PHY in multi_v7 defconfig
ARM: configs: update lpc18xx defconfig
ARM: socfpga_defconfig: enable fpga manager
...
Linus Torvalds [Tue, 10 Nov 2015 23:06:26 +0000 (15:06 -0800)]
Merge tag 'armsoc-dt' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM DT updates from Olof Johansson:
"As usual, this is the massive branch we have for each release. Lots
of various updates and additions of hardware descriptions on existing
hardware, as well as the usual additions of new boards and SoCs.
This is also the first release where we've started mixing 64- and
32-bit DT updates in one branch.
(Specific details on what's actually here and new is pretty easy to
tell from the diffstat, so there's little point in duplicating listing
it here)"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits)
ARM: dts: uniphier: add system-bus-controller nodes
ARM64: juno: disable NOR flash node by default
ARM: dts: uniphier: add outer cache controller nodes
arm64: defconfig: Enable PCI generic host bridge by default
arm64: Juno: Add support for the PCIe host bridge on Juno R1
Documentation: of: Document the bindings used by Juno R1 PCIe host bridge
ARM: dts: uniphier: add I2C aliases for ProXstream2 boards
dts/Makefile: Add build support for LS2080a QDS & RDB board DTS
dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards
dts/ls2080a: Update Simulator DTS to add support of various peripherals
dts/ls2080a: Remove text about writing to Free Software Foundation
dts/ls2080a: Update DTSI to add support of various peripherals
doc: DTS: Update DWC3 binding to provide reference to generic bindings
doc/bindings: Update GPIO devicetree binding documentation for LS2080A
Documentation/dts: Move FSL board-specific bindings out of /powerpc
Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards
arm64: Rename FSL LS2085A SoC support code to LS2080A
arm64: Use generic Layerscape SoC family naming
ARM: dts: uniphier: add ProXstream2 Vodka board support
ARM: dts: uniphier: add ProXstream2 Gentil board support
...
Linus Torvalds [Tue, 10 Nov 2015 23:00:03 +0000 (15:00 -0800)]
Merge tag 'armsoc-drivers' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"As we've enabled multiplatform kernels on ARM, and greatly done away
with the contents under arch/arm/mach-*, there's still need for
SoC-related drivers to go somewhere.
Many of them go in through other driver trees, but we still have
drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
that might be shared between ARM and ARM64 (or just in general makes
sense to not have under the architecture directory).
This branch contains mostly such code:
- Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to
communicate with power management blocks on these SoCs for use by
clock, regulator and bus frequency drivers.
- Allwinner Reduced Serial Bus driver, again used to communicate with
PMICs.
- Drivers for ARM's SCPI (System Control Processor). Not to be
confused with PSCI (Power State Coordination Interface). SCPI is
used to communicate with the assistant embedded cores doing power
management, and we have yet to see how many of them will implement
this for their hardware vs abstracting in other ways (or not at all
like in the past).
- To make confusion between SCPI and PSCI more likely, this release
also includes an update of PSCI to interface version 1.0.
- Rockchip support for power domains.
- A driver to talk to the firmware on Raspberry Pi"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
soc: qcom: smd-rpm: Correct size of outgoing message
bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus
bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings
ARM: bcm2835: add mutual inclusion protection
drivers: psci: make PSCI 1.0 functions initialization version dependent
dt-bindings: Correct paths in Rockchip power domains binding document
soc: rockchip: power-domain: don't try to print the clock name in error case
soc: qcom/smem: add HWSPINLOCK dependency
clk: berlin: add cpuclk
ARM: berlin: dts: add CLKID_CPU for BG2Q
ARM: bcm2835: Add the Raspberry Pi firmware driver
soc: qcom: smem: Move RPM message ram out of smem DT node
soc: qcom: smd-rpm: Correct the active vs sleep state flagging
soc: qcom: smd: delete unneeded of_node_put
firmware: qcom-scm: build for correct architecture level
soc: qcom: smd: Correct SMEM items for upper channels
qcom-scm: add missing prototype for qcom_scm_is_available()
qcom-scm: fix endianess issue in __qcom_scm_is_call_available
soc: qcom: smd: Reject send of too big packets
soc: qcom: smd: Handle big endian CPUs
...
Linus Torvalds [Tue, 10 Nov 2015 22:56:23 +0000 (14:56 -0800)]
Merge tag 'armsoc-soc' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"New and/or improved SoC support for this release:
Marvell Berlin:
- Enable standard DT-based cpufreq
- Add CPU hotplug support
Freescale:
- Ethernet init for i.MX7D
- Suspend/resume support for i.MX6UL
Allwinner:
- Support for R8 chipset (used on NTC's $9 C.H.I.P board)
Mediatek:
- SMP support for some platforms
Uniphier:
- L2 support
- Cleaned up SMP support, etc.
plus a handful of other patches around above functionality, and a few
other smaller changes"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
ARM: uniphier: rework SMP operations to use trampoline code
ARM: uniphier: add outer cache support
Documentation: EXYNOS: Update bootloader interface on exynos542x
ARM: mvebu: add broken-idle option
ARM: orion5x: use mac_pton() helper
ARM: at91: pm: at91_pm_suspend_in_sram() must be 8-byte aligned
ARM: sunxi: Add R8 support
ARM: digicolor: select pinctrl/gpio driver
arm: berlin: add CPU hotplug support
arm: berlin: use non-self-cleared reset register to reset cpu
ARM: mediatek: add smp bringup code
ARM: mediatek: enable gpt6 on boot up to make arch timer working
soc: mediatek: Fix random hang up issue while kernel init
soc: ti: qmss: make acc queue support optional in the driver
soc: ti: add firmware file name as part of the driver
Documentation: dt: soc: Add description for knav qmss driver
ARM: S3C64XX: Use PWM lookup table for mach-smartq
ARM: S3C64XX: Use PWM lookup table for mach-hmt
ARM: S3C64XX: Use PWM lookup table for mach-crag6410
ARM: S3C64XX: Use PWM lookup table for smdk6410
...
Linus Torvalds [Tue, 10 Nov 2015 22:48:36 +0000 (14:48 -0800)]
Merge tag 'armsoc-cleanup' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"Again we have a sizable (but not huge) cleanup branch with a net delta
of about -3k lines.
Main contents here is:
- A bunch of development/cleanup of a few PXA boards
- Removal of bockw platforms on shmobile, since the platform has now
gone completely multiplatform. Whee!
- move of the 32kHz timer on OMAP to a proper timesource
- Misc cleanup of older OMAP material (incl removal of one board
file)
- Switch over to new common PWM lookup support for several platforms
There's also a handful of other cleanups across the tree, but the
above are the major pieces"
* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (103 commits)
ARM: OMAP3: hwmod data: Remove legacy mailbox data and addrs
ARM: DRA7: hwmod data: Remove spinlock hwmod addrs
ARM: OMAP4: hwmod data: Remove spinlock hwmod addrs
ARM: DRA7/AM335x/AM437x: hwmod: Remove gpmc address space from hwmod data
ARM: Remove __ref on hotplug cpu die path
ARM: Remove open-coded version of IRQCHIP_DECLARE
arm: omap2: board-generic: use omap4_local_timer_init for AM437x
ARM: DRA7/AM335x/AM437x: hwmod: Remove elm address space from hwmod data
ARM: OMAP: Remove duplicated operand in OR operation
clocksource: ti-32k: make it depend on GENERIC_CLOCKSOURCE
ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode
ARM: pxa: raumfeld: make some variables static
ARM: OMAP: Change all cpu_is_* occurences to soc_is_* for id.c
ARM: OMAP2+: Rename cpu_is macros to soc_is
arm: omap2: timer: limit hwmod usage to non-DT boots
arm: omap2+: select 32k clocksource driver
clocksource: add TI 32.768 Hz counter driver
arm: omap2: timer: rename omap_sync32k_timer_init()
arm: omap2: timer: always call clocksource_of_init() when DT
arm: omap2: timer: move realtime_counter_init() around
...
Pablo Neira Ayuso [Tue, 10 Nov 2015 12:39:42 +0000 (13:39 +0100)]
netfilter: nf_tables: add clone interface to expression operations
With the conversion of the counter expressions to make it percpu, we
need to clone the percpu memory area, otherwise we crash when using
counters from flow tables.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Tue, 10 Nov 2015 13:31:18 +0000 (14:31 +0100)]
net: add __netdev_alloc_pcpu_stats() to indicate gfp flags
nf_tables may create percpu counters from the packet path through its
dynamic set instantiation infrastructure, so we need a way to allocate
this through GFP_ATOMIC.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Tue, 10 Nov 2015 12:22:15 +0000 (13:22 +0100)]
netfilter: fix xt_TEE and xt_TPROXY dependencies
Kconfig is too smart for its own good: a Kconfig line that states
select NF_DEFRAG_IPV6 if IP6_NF_IPTABLES
means that if IP6_NF_IPTABLES is set to 'm', then NF_DEFRAG_IPV6 will
also be set to 'm', regardless of the state of the symbol from which
it is selected. When the xt_TEE driver is built-in and nothing else
forces NF_DEFRAG_IPV6 to be built-in, this causes a link-time error:
net/built-in.o: In function `tee_tg6':
net/netfilter/xt_TEE.c:46: undefined reference to `nf_dup_ipv6'
This works around that behavior by changing the dependency to
'if IP6_NF_IPTABLES != n', which is interpreted as boolean expression
rather than a tristate and causes the NF_DEFRAG_IPV6 symbol to
be built-in as well.
The bug only occurs once in thousands of 'randconfig' builds and
does not really impact real users. From inspecting the other
surrounding Kconfig symbols, I am guessing that NETFILTER_XT_TARGET_TPROXY
and NETFILTER_XT_MATCH_SOCKET have the same issue. If not, this
change should still be harmless.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Arnd Bergmann [Tue, 10 Nov 2015 12:08:15 +0000 (13:08 +0100)]
netfilter: nfnetlink_log: work around uninitialized variable warning
After a recent (correct) change, gcc started warning about the use
of the 'flags' variable in nfulnl_recv_config()
net/netfilter/nfnetlink_log.c: In function 'nfulnl_recv_config':
net/netfilter/nfnetlink_log.c:320:14: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized]
net/netfilter/nfnetlink_log.c:828:6: note: 'flags' was declared here
The warning first shows up in ARM s3c2410_defconfig with gcc-4.3 or
higher (including 5.2.1, which is the latest version I checked) I
tried working around it by rearranging the code but had no success
with that.
As a last resort, this initializes the variable to zero, which shuts
up the warning, but means that we don't get a warning if the code
is ever changed in a way that actually causes the variable to be
used without first being written.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes:
8cbc870829ec ("netfilter: nfnetlink_log: validate dependencies to avoid breaking atomicity")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Linus Torvalds [Tue, 10 Nov 2015 22:45:05 +0000 (14:45 -0800)]
Merge tag 'armsoc-fixes-nc' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC non-urgent fixes from Olof Johansson:
"A handful of fixes that came in and didn't seem warranted to go in
through the 4.3-rc cycle.
- MAINTAINERS updates for one of the Broadcom platforms and lpc18xx
- A couple of non-critical Davinci bugfixes
- A fix to reset irq affinity for TI platforms (silences a warning at
reboot)"
* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
MAINTAINERS: update lpc18xx entry with more drivers
soc: ti: reset irq affinity before freeing irq
ARM: cns3xxx: pci: avoid potential stack overflow
ARM: davinci: clock: Correct return values for API functions
ARM: davinci: re-use %*ph specifier
MAINTAINERS: add entry for the Broadcom Northstar Plus SoCs
Tony Luck [Tue, 10 Nov 2015 18:09:47 +0000 (10:09 -0800)]
Fix alloc_node_mem_map() to work on ia64 again
In commit
a1c34a3bf00a ("mm: Don't offset memmap for flatmem") Laura
fixed a problem for Srinivas relating to the bottom 2MB of RAM on an ARM
IFC6410 board.
One small wrinkle on ia64 is that it allocates the node_mem_map earlier
in arch code, so it skips the block of code where "offset" is
initialized.
Move initialization of start and offset before the check for the
node_mem_map so that they will always be available in the latter part of
the function.
Tested-by: Laura Abbott <laura@labbott.name>
Fixes:
a1c34a3bf00a (mm: Don't offset memmap for flatmem)
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlad Yasevich [Tue, 10 Nov 2015 11:15:32 +0000 (06:15 -0500)]
Revert "bridge: Allow forward delay to be cfgd when STP enabled"
This reverts commit
34c2d9fb0498c066afbe610b15e18995fd8be792.
There are 2 reasons for this revert:
1) The commit in question doesn't do what it says it does. The
description reads: "Allow bridge forward delay to be configured
when Spanning Tree is enabled." This was already the case before
the commit was made. What the commit actually do was disallow
invalid values or 'forward_delay' when STP was turned off.
2) The above change was actually a change in the user observed
behavior and broke things like libvirt and other network configs
that set 'forward_delay' to 0 without enabling STP. The value
of 0 is actually used when STP is turned off to immediately mark
the bridge as forwarding.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steven Rostedt [Tue, 10 Nov 2015 20:28:17 +0000 (15:28 -0500)]
bpf_trace: Make dependent on PERF_EVENTS
Arnd Bergmann reported:
In my ARM randconfig tests, I'm getting a build error for
newly added code in bpf_perf_event_read and bpf_perf_event_output
whenever CONFIG_PERF_EVENTS is disabled:
kernel/trace/bpf_trace.c: In function 'bpf_perf_event_read':
kernel/trace/bpf_trace.c:203:11: error: 'struct perf_event' has no member named 'oncpu'
if (event->oncpu != smp_processor_id() ||
^
kernel/trace/bpf_trace.c:204:11: error: 'struct perf_event' has no member named 'pmu'
event->pmu->count)
This can happen when UPROBE_EVENT is enabled but KPROBE_EVENT
is disabled. I'm not sure if that is a configuration we care
about, otherwise we could prevent this case from occuring by
adding Kconfig dependencies.
Looking at this further, it's really that UPROBE_EVENT enables PERF_EVENTS.
By just having BPF_EVENTS depend on PERF_EVENTS, then all is fine.
Link: http://lkml.kernel.org/r/4525348.Aq9YoXkChv@wuerfel
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Tue, 10 Nov 2015 10:28:15 +0000 (11:28 +0100)]
qed: select ZLIB_INFLATE
The newly added qlogic qed driver uses the zlib library, but
misses the dependency:
drivers/built-in.o: In function `qed_alloc_stream_mem':
drivers/net/ethernet/qlogic/qed/qed_main.c:707: undefined reference to `zlib_inflate_workspacesize'
drivers/built-in.o: In function `qed_unzip_data':
drivers/net/ethernet/qlogic/qed/qed_main.c:675: undefined reference to `zlib_inflateInit2'
This changes Kconfig to always select zlib when needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes:
fe56b9e6a8d9 ("qed: Add module with basic common support")
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 10 Nov 2015 20:13:00 +0000 (12:13 -0800)]
Merge tag 'md/4.4-rc0-fix' of git://neil.brown.name/md
Pull config fix for md from Neil Brown:
"New config dependency needed as md/raid5 now uses crc32c"
* tag 'md/4.4-rc0-fix' of git://neil.brown.name/md:
raid5-cache: add crc32c Kconfig dependency
Linus Torvalds [Tue, 10 Nov 2015 20:07:22 +0000 (12:07 -0800)]
Merge tag 'libnvdimm-for-4.4' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Outside of the new ACPI-NFIT hot-add support this pull request is more
notable for what it does not contain, than what it does. There were a
handful of development topics this cycle, dax get_user_pages, dax
fsync, and raw block dax, that need more more iteration and will wait
for 4.5.
The patches to make devm and the pmem driver NUMA aware have been in
-next for several weeks. The hot-add support has not, but is
contained to the NFIT driver and is passing unit tests. The coredump
support is straightforward and was looked over by Jeff. All of it has
received a 0day build success notification across 107 configs.
Summary:
- Add support for the ACPI 6.0 NFIT hot add mechanism to process
updates of the NFIT at runtime.
- Teach the coredump implementation how to filter out DAX mappings.
- Introduce NUMA hints for allocations made by the pmem driver, and
as a side effect all devm allocations now hint their NUMA node by
default"
* tag 'libnvdimm-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
coredump: add DAX filtering for FDPIC ELF coredumps
coredump: add DAX filtering for ELF coredumps
acpi: nfit: Add support for hot-add
nfit: in acpi_nfit_init, break on a 0-length table
pmem, memremap: convert to numa aware allocations
devm_memremap_pages: use numa_mem_id
devm: make allocations numa aware by default
devm_memremap: convert to return ERR_PTR
devm_memunmap: use devres_release()
pmem: kill memremap_pmem()
x86, mm: quiet arch_add_memory()
Linus Torvalds [Tue, 10 Nov 2015 19:58:25 +0000 (11:58 -0800)]
Merge branch 'i2c/for-4.4' of git://git./linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- New drivers: UniPhier (with and without FIFO)
- some drivers got some bigger rework: ismt, designware, img-scb (rcar
had to be reverted because issues were showing up just lately)
- ACPI: reworked the device scanning and added support for muxes
... and quite a lot of driver bugfixes and cleanups this time. All
files touched outside of the i2c realm have proper acks.
* 'i2c/for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits)
i2c: rcar: Revert the latest refactoring series
i2c: pnx: remove superfluous assignment
MAINTAINERS: i2c: drop i2c-pnx maintainer
MAINTAINERS: i2c: mark also subdirectories as maintained
i2c: cadence: enable driver for ARM64
i2c: i801: Document Intel DNV and Broxton
i2c: at91: manage unexpected RXRDY flag when starting a transfer
i2c: pnx: Use setup_timer instead of open coding it
i2c: add ACPI support for I2C mux ports
acpi: add acpi_preset_companion() stub
i2c: pxa: Add support for pxa910/988 & new configuration features
i2c: au1550: Convert to devm_kzalloc and devm_ioremap_resource
i2c-dev: Fix I2C_SLAVE ioctl comment
i2c-dev: Fix typo in ioctl name reference
i2c: sirf: tune the divider to make i2c bus freq more accurate
i2c: imx: Use -ENXIO as error in the NACK case
i2c: i801: Add support for Intel Broxton
i2c: i801: Add support for Intel DNV
i2c: mediatek: add i2c resume support
i2c: imx: implement bus recovery
...
Linus Torvalds [Tue, 10 Nov 2015 18:11:12 +0000 (10:11 -0800)]
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog update from Wim Van Sebroeck:
- New driver for Broadcom 7038 Set-Top Box
- imx2_wdt: Use register definition in regmap_write()
- intel-mid: add Magic Closure flag
- watchdog framework improvements:
- Use device tree alias for naming watchdogs
- propagate ping error code to the user space
- Always evaluate new timeout against min_timeout
- Use single variable name for struct watchdog_device
- include clean-ups
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: include: add units for timeout values in kerneldoc
watchdog: include: fix some typos
watchdog: core: propagate ping error code to the user space
watchdog: watchdog_dev: Use single variable name for struct watchdog_device
watchdog: Always evaluate new timeout against min_timeout
watchdog: intel-mid: add Magic Closure flag
watchdog: imx2_wdt: Use register definition in regmap_write()
watchdog: watchdog_dev: Use device tree alias for naming watchdogs
watchdog: Watchdog driver for Broadcom Set-Top Box
watchdog: bcm7038: add device tree binding documentation
Linus Torvalds [Tue, 10 Nov 2015 18:09:01 +0000 (10:09 -0800)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging
Pull tiny hwmon update from Jean Delvare.
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
hwmon: (k10temp) Remove duplicate pci-id define
Linus Torvalds [Tue, 10 Nov 2015 18:07:50 +0000 (10:07 -0800)]
Merge tag 'ntb-4.4' of git://github.com/jonmason/ntb
Pull NTB bugfixes from Jon Mason:
"NTB Bug fixes for potential NULL pointer accesses, accesses of a freed
pointer, invalid buffer pointer, and a compiler warning.
Also, unification of upstream/downstream addresses"
* tag 'ntb-4.4' of git://github.com/jonmason/ntb:
NTB: fix 32-bit compiler warning
NTB: unify translation addresses
NTB: invalid buf pointer in multi-MW setups
NTB: remove unused variable
NTB: fix access of free-ed pointer
NTB: Fix issue where we may be accessing NULL ptr
Linus Torvalds [Tue, 10 Nov 2015 18:05:17 +0000 (10:05 -0800)]
Merge tag 'dmaengine-4.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"This time we have a very typical update which is mostly fixes and
updates to drivers and no new drivers.
- the biggest change is coming from Peter for edma cleanup which even
caused some last minute regression, things seem settled now
- idma64 and dw updates
- iotdma updates
- module autoload fixes for various drivers
- scatter gather support for hdmac"
* tag 'dmaengine-4.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (77 commits)
dmaengine: edma: Add dummy driver skeleton for edma3-tptc
Revert "ARM: DTS: am33xx: Use the new DT bindings for the eDMA3"
Revert "ARM: DTS: am437x: Use the new DT bindings for the eDMA3"
dmaengine: dw: some Intel devices has no memcpy support
dmaengine: dw: platform: provide platform data for Intel
dmaengine: dw: don't override platform data with autocfg
dmaengine: hdmac: Add scatter-gathered memset support
dmaengine: hdmac: factorise memset descriptor allocation
dmaengine: virt-dma: Fix kernel-doc annotations
ARM: DTS: am437x: Use the new DT bindings for the eDMA3
ARM: DTS: am33xx: Use the new DT bindings for the eDMA3
dmaengine: edma: New device tree binding
dmaengine: Kconfig: edma: Select TI_DMA_CROSSBAR in case of ARCH_OMAP
dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx
dmaengine: edma: Merge the of parsing functions
dmaengine: edma: Do not allocate memory for edma_rsv_info in case of DT boot
dmaengine: edma: Refactor the dma device and channel struct initialization
dmaengine: edma: Get qDMA channel information from HW also
dmaengine: edma: Merge map_dmach_to_queue into assign_channel_eventq
dmaengine: edma: Correct PaRAM access function names (_parm_ to _param_)
...
Linus Torvalds [Tue, 10 Nov 2015 18:01:21 +0000 (10:01 -0800)]
Merge tag 'rtc-v4.4' of git://git./linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Core:
- Fix rtctest error path
New drivers:
- Microcrystal RV8803
Subsystem wide cleanups:
- remove misuse of IRQF_NO_SUSPEND flag
Drivers:
- at91rm9200: clear RTC alarm status flag prior to suspending
- davinci: remove incorrect reference to probe function
- ds1307: Fix alarm programming for mcp794xx
- ds1390: trickle charger support, fix ds1390_get_reg
- isl1208: Pass the IRQF_ONESHOT flag
- opal: fix type of token
- pcf2127: fix RTC_READ_VL, remove useless driver version
- pcf85063: return an error when date is invalid
- pcf8563: add CLKOUT to common clock framework
- rx8025: remove unnecessary braces
- s3c: Set year, month, day value for setting alarm
- stmp3xxx: unify register access macros
- License fixes: pcf2127, da9063
- wakeup-source support for isl12057 and opal"
* tag 'rtc-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (23 commits)
rtc: Add a driver for Micro Crystal RV8803
rtc: s3c: Set year, month, day value for setting alarm
rtc: ds1307: Fix alarm programming for mcp794xx
rtc: isl12057: enable support for the standard "wakeup-source" property
rtc: opal: enable support for the stardard "wakeup-source" property
rtc: isl1208: Pass the IRQF_ONESHOT flag
rtc: pcf8563: add CLKOUT to common clock framework
rtc: davinci: remove incorrect reference to probe function
rtc: at91rm9200: clear RTC alarm status flag prior to suspending
rtc: pcf2127: remove useless driver version
rtc: pcf2127: fix reading uninitialized value on RTC_READ_VL ioctl
rtc: stmp3xxx: unify register access macros
rtc: da9063: GPL copyright inconsistency fix
rtc: pcf85063: return an error when date is invalid
rtc: rx8025: remove unnecessary braces
rtc: ds1343: remove misuse of IRQF_NO_SUSPEND flag
rtc: ab8500: remove misuse of IRQF_NO_SUSPEND flag
rtc: pl031: remove misuse of IRQF_NO_SUSPEND flag
rtc: opal: fix type of token
rtc: ds1390: Add trickle charger device tree binding
...
Linus Torvalds [Tue, 10 Nov 2015 18:00:09 +0000 (10:00 -0800)]
Merge tag 'fbdev-4.4' of git://git./linux/kernel/git/tomba/linux
Pull fbdev updates from Tomi Valkeinen:
- omap: fix hdmi audio configuration issue
- ssd1307fb: add ssd1309 support
- tridentfb: support DDC
- gxt4500: enable support for non-PPC platforms
* tag 'fbdev-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
radeonfb: Deinline large functions
gxt4500: enable panning
gxt4500: Use arch_phys_wc_* for framebuffer
gxt4500: fix color order
gxt4500: fix 16bpp 565 mode
gxt4500: enable on non-PPC architectures
tridentfb: Add DDC support
fb_ddc: Allow I2C adapters without SCL read capability
fbdev: ssd1307fb: add ssd1309 support
fbdev: ssd1307fb: alphabetize headers
video/omap: remove invalid check
OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled
Linus Torvalds [Tue, 10 Nov 2015 17:33:06 +0000 (09:33 -0800)]
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"I Was Almost Tempted To Capitalise Every Word, but then I decided I
couldn't read it myself!
I've also got one pull request for the sti driver outstanding. It
relied on a commit in Greg's tree and I didn't find out in time, that
commit is in your tree now so I might send that along once this is
merged.
I also had the accidental misfortune to have access to a Skylake on my
desk for a few days, and I've had to encourage Intel to try harder,
which seems to be happening now.
Here is the main drm-next pull request for 4.4.
Highlights:
New driver:
vc4 driver for the Rasberry Pi VPU.
(From Eric Anholt at Broadcom.)
Core:
Atomic fbdev support
Atomic helpers for runtime pm
dp/aux i2c STATUS_UPDATE handling
struct_mutex usage cleanups.
Generic of probing support.
Documentation:
Kerneldoc for VGA switcheroo code.
Rename to gpu instead of drm to reflect scope.
i915:
Skylake GuC firmware fixes
HPD A support
VBT backlight fallbacks
Fastboot by default for some systems
FBC work
BXT/SKL workarounds
Skylake deeper sleep state fixes
amdgpu:
Enable GPU scheduler by default
New atombios opcodes
GPUVM debugging options
Stoney support.
Fencing cleanups.
radeon:
More efficient CS checking
nouveau:
gk20a instance memory handling improvements.
Improved PGOB detection and GK107 support
Kepler GDDR5 PLL statbility improvement
G8x/GT2xx reclock improvements
new userspace API compatiblity fixes.
virtio-gpu:
Add 3D support - qemu 2.5 has it merged for it's gtk backend.
msm:
Initial msm88896 (snapdragon 8200)
exynos:
HDMI cleanups
Enable mixer driver byt default
Add DECON-TV support
vmwgfx:
Move to using memremap + fixes.
rcar-du:
Add support for R8A7793/4 DU
armada:
Remove support for non-component mode
Improved plane handling
Power savings while in DPMS off.
tda998x:
Remove unused slave encoder support
Use more HDMI helpers
Fix EDID read handling
dwhdmi:
Interlace video mode support for ipu-v3/dw_hdmi
Hotplug state fixes
Audio driver integration
imx:
More color formats support.
tegra:
Minor fixes/improvements"
[ Merge fixup: remove unused variable 'dev' that had all uses removed in
commit
4e270f088011: "drm/gem: Drop struct_mutex requirement from
drm_gem_mmap_obj" ]
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (764 commits)
drm/vmwgfx: Relax irq locking somewhat
drm/vmwgfx: Properly flush cursor updates and page-flips
drm/i915/skl: disable display side power well support for now
drm/i915: Extend DSL readout fix to BDW and SKL.
drm/i915: Do graphics device reset under forcewake
drm/i915: Skip fence installation for objects with rotated views (v4)
vga_switcheroo: Drop client power state VGA_SWITCHEROO_INIT
drm/amdgpu: group together common fence implementation
drm/amdgpu: remove AMDGPU_FENCE_OWNER_MOVE
drm/amdgpu: remove now unused fence functions
drm/amdgpu: fix fence fallback check
drm/amdgpu: fix stoping the scheduler timeout
drm/amdgpu: cleanup on error in amdgpu_cs_ioctl()
drm/i915: Fix locking around GuC firmware load
drm/amdgpu: update Fiji's Golden setting
drm/amdgpu: update Fiji's rev id
drm/amdgpu: extract common code in vi_common_early_init
drm/amd/scheduler: don't oops on failure to load
drm/amdgpu: don't oops on failure to load (v2)
drm/amdgpu: don't VT switch on suspend
...
Jens Axboe [Tue, 10 Nov 2015 17:14:38 +0000 (10:14 -0700)]
direct-io: be sure to assign dio->bio_bdev for both paths
btrfs sets ->submit_io(), and we failed to set the block dev for
that path. That resulted in a potential NULL dereference when
we later wait for IO in dio_await_one().
Reported-by: kernel test robot <ying.huang@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Linus Torvalds [Tue, 10 Nov 2015 05:05:13 +0000 (21:05 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge third patch-bomb from Andrew Morton:
"We're pretty much done over here - I'm still waiting for a nouveau
merge so I can cleanly finish up Christoph's dma-mapping rework.
- bunch of small misc stuff
- fold abs64() into abs(), remove abs64()
- new_valid_dev() cleanups
- binfmt_elf_fdpic feature work"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (24 commits)
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries
fs/stat.c: remove unnecessary new_valid_dev() check
fs/reiserfs/namei.c: remove unnecessary new_valid_dev() check
fs/nilfs2/namei.c: remove unnecessary new_valid_dev() check
fs/ncpfs/dir.c: remove unnecessary new_valid_dev() check
fs/jfs: remove unnecessary new_valid_dev() checks
fs/hpfs/namei.c: remove unnecessary new_valid_dev() check
fs/f2fs/namei.c: remove unnecessary new_valid_dev() check
fs/ext2/namei.c: remove unnecessary new_valid_dev() check
fs/exofs/namei.c: remove unnecessary new_valid_dev() check
fs/btrfs/inode.c: remove unnecessary new_valid_dev() check
fs/9p: remove unnecessary new_valid_dev() checks
include/linux/kdev_t.h: old/new_valid_dev() can return bool
include/linux/kdev_t.h: remove unused huge_valid_dev()
kmap_atomic_to_page() has no users, remove it
drivers/scsi/cxgbi: fix build with EXTRA_CFLAGS
dma: remove external references to dma_supported
Documentation/sysctl/vm.txt: fix misleading code reference of overcommit_memory
remove abs64()
kernel.h: make abs() work with 64-bit types
...
Eric Dumazet [Tue, 10 Nov 2015 01:51:23 +0000 (17:51 -0800)]
net: fix a race in dst_release()
Only cpu seeing dst refcount going to 0 can safely
dereference dst->flags.
Otherwise an other cpu might already have freed the dst.
Fixes:
27b75c95f10d ("net: avoid RCU for NOCACHE dst")
Reported-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Justin Maggard [Tue, 10 Nov 2015 01:21:05 +0000 (17:21 -0800)]
net: mvneta: Fix memory use after free.
After changing an interface's MTU, then bringing the interface down and
back up again, I immediately saw tons of kernel messages like below.
The reason for this bad behavior is mvneta_rxq_drop_pkts(), which calls
dma_unmap_single() on already-freed memory. So we need to switch the
order of those two operations.
[ 152.388518] BUG: Bad page state in process ifconfig pfn:1b518
[ 152.388526] page:
dff3dbc0 count:0 mapcount:0 mapping: (null) index:0x0
[ 152.395178] flags: 0x200(arch_1)
[ 152.398441] page dumped because: PAGE_FLAGS_CHECK_AT_PREP flag set
[ 152.398446] bad because of flags:
[ 152.398450] flags: 0x200(arch_1)
[ 152.401716] Modules linked in:
[ 152.401728] CPU: 0 PID: 1453 Comm: ifconfig Tainted: P B O 4.1.12.armada.1 #1
[ 152.401733] Hardware name: Marvell Armada 370/XP (Device Tree)
[ 152.401749] [<
c0015b1c>] (unwind_backtrace) from [<
c0011d8c>] (show_stack+0x10/0x14)
[ 152.401762] [<
c0011d8c>] (show_stack) from [<
c06aa68c>] (dump_stack+0x74/0x90)
[ 152.401772] [<
c06aa68c>] (dump_stack) from [<
c0096c08>] (bad_page+0xc4/0x124)
[ 152.401783] [<
c0096c08>] (bad_page) from [<
c0099378>] (get_page_from_freelist+0x4e4/0x644)
[ 152.401794] [<
c0099378>] (get_page_from_freelist) from [<
c0099620>] (__alloc_pages_nodemask+0x148/0x784)
[ 152.401805] [<
c0099620>] (__alloc_pages_nodemask) from [<
c00ac658>] (kmalloc_order+0x10/0x20)
[ 152.401818] [<
c00ac658>] (kmalloc_order) from [<
c04c6f44>] (mvneta_rx_refill+0xc4/0xe8)
[ 152.401830] [<
c04c6f44>] (mvneta_rx_refill) from [<
c04c96c0>] (mvneta_setup_rxqs+0x298/0x39c)
[ 152.401842] [<
c04c96c0>] (mvneta_setup_rxqs) from [<
c04c9904>] (mvneta_open+0x3c/0x150)
[ 152.401853] [<
c04c9904>] (mvneta_open) from [<
c0597764>] (__dev_open+0xac/0x124)
[ 152.401864] [<
c0597764>] (__dev_open) from [<
c05979e4>] (__dev_change_flags+0x8c/0x148)
[ 152.401875] [<
c05979e4>] (__dev_change_flags) from [<
c0597ac0>] (dev_change_flags+0x18/0x48)
[ 152.401886] [<
c0597ac0>] (dev_change_flags) from [<
c060d308>] (devinet_ioctl+0x620/0x6d0)
[ 152.401897] [<
c060d308>] (devinet_ioctl) from [<
c057d810>] (sock_ioctl+0x64/0x288)
[ 152.401908] [<
c057d810>] (sock_ioctl) from [<
c00dcb7c>] (do_vfs_ioctl+0x78/0x608)
[ 152.401918] [<
c00dcb7c>] (do_vfs_ioctl) from [<
c00dd170>] (SyS_ioctl+0x64/0x74)
[ 152.401930] [<
c00dd170>] (SyS_ioctl) from [<
c000f3a0>] (ret_fast_syscall+0x0/0x3c)
Signed-off-by: Justin Maggard <jmaggard@netgear.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 10 Nov 2015 02:11:22 +0000 (18:11 -0800)]
Merge tag 'nfs-for-4.4-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
New features:
- RDMA client backchannel from Chuck
- Support for NFSv4.2 file CLONE using the btrfs ioctl
Bugfixes + cleanups:
- Move socket data receive out of the bottom halves and into a
workqueue
- Refactor NFSv4 error handling so synchronous and asynchronous RPC
handles errors identically.
- Fix a panic when blocks or object layouts reads return a bad data
length
- Fix nfsroot so it can handle a 1024 byte long path.
- Fix bad usage of page offset in bl_read_pagelist
- Various NFSv4 callback cleanups+fixes
- Fix GETATTR bitmap verification
- Support hexadecimal number for sunrpc debug sysctl files"
* tag 'nfs-for-4.4-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (53 commits)
Sunrpc: Supports hexadecimal number for sysctl files of sunrpc debug
nfs: Fix GETATTR bitmap verification
nfs: Remove unused xdr page offsets in getacl/setacl arguments
fs/nfs: remove unnecessary new_valid_dev check
SUNRPC: fix variable type
NFS: Enable client side NFSv4.1 backchannel to use other transports
pNFS/flexfiles: Add support for FF_FLAGS_NO_IO_THRU_MDS
pNFS/flexfiles: When mirrored, retry failed reads by switching mirrors
SUNRPC: Remove the TCP-only restriction in bc_svc_process()
svcrdma: Add backward direction service for RPC/RDMA transport
xprtrdma: Handle incoming backward direction RPC calls
xprtrdma: Add support for sending backward direction RPC replies
xprtrdma: Pre-allocate Work Requests for backchannel
xprtrdma: Pre-allocate backward rpc_rqst and send/receive buffers
SUNRPC: Abstract backchannel operations
xprtrdma: Saving IRQs no longer needed for rb_lock
xprtrdma: Remove reply tasklet
xprtrdma: Use workqueue to process RPC/RDMA replies
xprtrdma: Replace send and receive arrays
xprtrdma: Refactor reply handler error handling
...
Linus Torvalds [Tue, 10 Nov 2015 02:01:23 +0000 (18:01 -0800)]
Merge tag 'gfs2-merge-window' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Bob Peterson:
"Here is a list of patches we've accumulated for GFS2 for the current
upstream merge window. There are only six patches this time:
1. A cleanup patch from Andreas to remove the gl_spin #define in favor
of its value for the sake of clarity.
2. A fix from Andy Price to mark the inode dirty during fallocate.
3. A fix from Andy Price to set s_mode on mount failures to prevent a
stack trace.
4 A patch from me to prevent a kernel BUG() in trans_add_meta/trans_add_data
due to uninitialized storage.
5. A patch from me to protecting our freeing of the in-core directory
hash table to prevent double-free.
6. A fix for a page/block rounding problem that resulted in a metadata
coherency problem when the block size != page size"
I've got a lot more patches in various stages of review and testing,
but I'm afraid they'll have to wait until the next merge window. So
next time we're likely to have a lot more"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Fix rgrp end rounding problem for bsize < page size
GFS2: Protect freeing directory hash table with i_lock spin_lock
gfs2: Remove gl_spin define
gfs2: Add missing else in trans_add_meta/data
GFS2: Set s_mode before parsing mount options
GFS2: fallocate: do not rely on file_update_time to mark the inode dirty
Linus Torvalds [Tue, 10 Nov 2015 01:38:34 +0000 (17:38 -0800)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs
Pull ext2 fix from Jan Kara:
"Fix for DAX on ext2"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Add locking for DAX faults
Linus Torvalds [Tue, 10 Nov 2015 00:37:00 +0000 (16:37 -0800)]
Merge branch 'parisc-4.4-1' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"We have two patches in here:
- The parisc uapi headers have been screwed up since quite some time.
This patch fixes some bugs (e.g. endianess not respected in
compat_semid64_ds) and cleans them up (e.g. uid_t was used instead
of __kernel_uid_t) so that they can be used by userspace again.
This patch has been reviewed by Arnd Bergmann and is scheduled for
stable kernel series.
- Drop the hpux_stat64 struct from stat.h, we do not support HP-UX
binaries since kernel 4.0"
* 'parisc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fixes and cleanups in kernel uapi header files
parisc: Drop hpux_stat64 struct from stat.h header file
Linus Torvalds [Tue, 10 Nov 2015 00:36:10 +0000 (16:36 -0800)]
Merge tag 'nios2-v4.4-rc1' of git://git./linux/kernel/git/lftan/nios2
Pull nios2 updates from Ley Foon Tan:
- nios2: Remove unnecessary #ifdef guards
- nios2: Switch to generic __xchg()
- nios2: Fix unused variable warning
* tag 'nios2-v4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
nios2: Remove unnecessary #ifdef guards
nios2: Switch to generic __xchg()
nios2: Fix unused variable warning
Olof Johansson [Tue, 10 Nov 2015 00:35:19 +0000 (16:35 -0800)]
Merge branch 'next/arm64' into next/dt
Merging in the few patches I had kept separate from main next/dt, since others
got merged here directly.
* next/arm64:
arm64: defconfig: Enable PCI generic host bridge by default
arm64: Juno: Add support for the PCIe host bridge on Juno R1
Documentation: of: Document the bindings used by Juno R1 PCIe host bridge
arm64: dts: mt8173: Add clocks for SCPSYS unit
arm64: dts: mt8173: Add subsystem clock controller device nodes
+ Linux 4.3-rc5
Linus Torvalds [Tue, 10 Nov 2015 00:32:13 +0000 (16:32 -0800)]
Merge tag 'xtensa-
20151108' of git://github.com/czankel/xtensa-linux
Pull xtensa updates from Chris Zankel:
- fix remaining issues with noMMU cores
- fix build for cores w/o cache or zero overhead loop options
- fix boot of secondary cores in SMP configuration
- add support for DMA to high memory pages
- add dma_to_phys and phys_to_dma functions.
* tag 'xtensa-
20151108' of git://github.com/czankel/xtensa-linux:
xtensa: implement dma_to_phys and phys_to_dma
xtensa: support DMA to high memory
Revert "xtensa: cache inquiry and unaligned cache handling functions"
xtensa: drop unused sections and remapped reset handlers
xtensa: fix secondary core boot in SMP
xtensa: add FORCE_MAX_ZONEORDER to Kconfig
xtensa: nommu: provide defconfig for de212 on kc705
xtensa: nommu: xtfpga: add kc705 DTS
xtensa: add de212 core variant
xtensa: nommu: select HAVE_FUTEX_CMPXCHG
xtensa: nommu: fix default memory start address
xtensa: nommu: provide correct KIO addresses
xtensa: nommu: fix USER_RING definition
xtensa: xtfpga: fix integer overflow in TASK_SIZE
xtensa: fix build for configs without cache options
xtensa: fixes for configs without loop option
Linus Torvalds [Tue, 10 Nov 2015 00:22:26 +0000 (16:22 -0800)]
Merge branch 'for-next' of git://git./linux/kernel/git/gerg/m68knommu
Pull m68knommu/coldfire fix from Greg Ungerer:
"Only a single patch, fixes brk area setup problem in nommu
environments"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
fs/binfmt_elf_fdpic.c: fix brk area overlap with stack on NOMMU
Linus Torvalds [Mon, 9 Nov 2015 23:53:39 +0000 (15:53 -0800)]
Merge tag 'modules-next-for-linus' of git://git./linux/kernel/git/rusty/linux
Pull module updates from Rusty Russell:
"Nothing exciting, minor tweaks and cleanups"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
scripts: [modpost] add new sections to white list
modpost: Add flag -E for making section mismatches fatal
params: don't ignore the rest of cmdline if parse_one() fails
modpost: abort if a module symbol is too long
Rich Felker [Mon, 9 Nov 2015 22:59:01 +0000 (14:59 -0800)]
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries
The ELF binary loader in binfmt_elf.c requires an MMU, making it
impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC
ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain
ELF, which requires constant displacements between LOAD segments, since it
already supports FDPIC ELF files flagged as needing constant displacement.
This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on
NOMMU archs. They are treated identically to FDPIC ELF files with the
constant-displacement flag bit set, except for personality, which must
match the ABI of the program being loaded; the PER_LINUX_FDPIC personality
controls how the kernel interprets function pointers passed to sigaction.
Files that do not set a stack size requirement explicitly are given a
default stack size (matching the amount of committed stack the normal ELF
loader for MMU archs would give them) rather than being rejected; this is
necessary because plain ELF files generally do not declare stack
requirements in theit program headers.
Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed
virtual address is not possible on NOMMU.
This patch was developed and tested on J2 (SH2-compatible) but should
be usable immediately on all archs where binfmt_elf_fdpic is
available. Moreover, by providing dummy definitions of the
elf_check_fdpic() and elf_check_const_displacement() macros for archs
which lack an FDPIC ABI, it should be possible to enable building of
binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF
binary support, but I have not yet tested this.
The motivation for using binfmt_elf_fdpic.c rather than adapting
binfmt_elf.c to NOMMU is that the former already has all the necessary
code to work properly on NOMMU and has already received widespread
real-world use and testing. I hope this is not controversial.
I'm not really happy with having to unset the FDPIC_FUNCPTRS
personality bit when loading non-FDPIC ELF. This bit should really
reset automatically on execve, since otherwise, executing non-ELF
binaries (e.g. bFLT) from an FDPIC process will leave the personality
in the wrong state and severely break signal handling. But that's a
separate, existing bug and I don't know the right place to fix it.
Signed-off-by: Rich Felker <dalias@libc.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Oleg Endo <oleg.endo@t-online.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yaowei Bai [Mon, 9 Nov 2015 22:58:58 +0000 (14:58 -0800)]
fs/stat.c: remove unnecessary new_valid_dev() check
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed. Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yaowei Bai [Mon, 9 Nov 2015 22:58:55 +0000 (14:58 -0800)]
fs/reiserfs/namei.c: remove unnecessary new_valid_dev() check
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed. Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yaowei Bai [Mon, 9 Nov 2015 22:58:53 +0000 (14:58 -0800)]
fs/nilfs2/namei.c: remove unnecessary new_valid_dev() check
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed. Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>