OSDN Git Service
The Android Automerger [Sun, 21 Oct 2012 06:14:02 +0000 (23:14 -0700)]
merge in jb-mr1-release history after reset to jb-mr1-dev
Jean-Michel Trivi [Sat, 20 Oct 2012 00:21:55 +0000 (17:21 -0700)]
Merge "AAC DRC reference level for mobile is -16dB" into jb-mr1-dev
Eino-Ville Talvala [Fri, 19 Oct 2012 23:47:32 +0000 (16:47 -0700)]
Merge "Camera2: Fix potential deadlock" into jb-mr1-dev
The Android Automerger [Fri, 19 Oct 2012 22:46:06 +0000 (15:46 -0700)]
merge in jb-mr1-release history after reset to jb-mr1-dev
Jean-Michel Trivi [Fri, 19 Oct 2012 21:52:16 +0000 (14:52 -0700)]
AAC DRC reference level for mobile is -16dB
Use -16dB as the default DRC reference level when decoding streams
with DRC metadata.
Bug
7370764
Change-Id: I900cee22f32384a5657fb041b69d42657bcddf09
Marco Nelissen [Fri, 19 Oct 2012 19:36:47 +0000 (12:36 -0700)]
Merge "Fix valgrind issues" into jb-mr1-dev
Glenn Kasten [Thu, 18 Oct 2012 22:51:31 +0000 (15:51 -0700)]
Remove active track when thread goes to standby
Bug:
7369232
Change-Id: I7ff9f525dad4be0aef562a53015b06ee7d3d50f1
The Android Automerger [Thu, 18 Oct 2012 13:59:29 +0000 (06:59 -0700)]
merge in jb-mr1-release history after reset to jb-mr1-dev
Eino-Ville Talvala [Wed, 17 Oct 2012 23:32:34 +0000 (16:32 -0700)]
Camera2: Fix potential deadlock
setPreviewWindow was holding a lock during long-lasting HAL calls
which may cause deadlock if the HAL calls back into the service during
the call. Stop holding the lock during these calls, since it's not
essential to do so.
Bug:
7320517
Change-Id: I4a35703d751e22ac32979b5a1288e291610576e7
James Dong [Wed, 17 Oct 2012 21:53:16 +0000 (14:53 -0700)]
Added some extra failure logging messages
o related-to-bug:
7282066
Change-Id: I0896551a45aab61fb571fef19061397ff84321d9
Marco Nelissen [Wed, 17 Oct 2012 17:57:02 +0000 (10:57 -0700)]
Fix valgrind issues
We were reading some uninitialized memory when creating bass boost and EQ
effects, and using memcpy() with identical source and destination.
Change-Id: I15ea1b2c52ae05cbf54aef04351e89805e0ebf8e
The Android Automerger [Wed, 17 Oct 2012 13:59:20 +0000 (06:59 -0700)]
merge in jb-mr1-release history after reset to jb-mr1-dev
The Android Automerger [Wed, 17 Oct 2012 00:30:23 +0000 (17:30 -0700)]
merge in jb-mr1-release history after reset to jb-mr1-dev
Eino-Ville Talvala [Tue, 16 Oct 2012 23:57:05 +0000 (16:57 -0700)]
Merge "Camera2: Improve quirks focusing behavior." into jb-mr1-dev
Eino-Ville Talvala [Tue, 16 Oct 2012 19:58:21 +0000 (12:58 -0700)]
Camera2: Improve quirks focusing behavior.
- When scene mode is set and the AF quirk is in use, don't change AF
mode and then cancel when AF cancel is received. Just change mode
since that also implies a cancel.
- Only trigger quirks switch when a focusing area is set.
Bug:
7318812
Change-Id: I28d8755553bd78052e774701210cb94d84ee2046
Jean-Michel Trivi [Tue, 16 Oct 2012 18:27:24 +0000 (11:27 -0700)]
Merge "Fix track estimation for presentation complete" into jb-mr1-dev
Jean-Michel Trivi [Tue, 16 Oct 2012 17:29:01 +0000 (10:29 -0700)]
Fix track estimation for presentation complete
Audio tracks were not using the right latency estimation for
signalling the completion of their presetation. This caused
the synchronization mechanism between playback and record to be
off, and a synchronized recording would contain some of the audio
that was meant to be over once recording would start.
Use the playback thread's latency reporting which takes the audio
pipe into account.
Bug
7237669
Change-Id: I23a907a53ad0b0d68d246789ec595a77a79fced5
Eino-Ville Talvala [Tue, 16 Oct 2012 17:28:07 +0000 (10:28 -0700)]
Camera2: Don't touch frame counter on output frames.
Bug:
7357069
Change-Id: I9cd0cdcc23959bfecced5f47bb9e8c59c997dade
Eino-Ville Talvala [Tue, 16 Oct 2012 17:17:30 +0000 (10:17 -0700)]
Camera2: When focus is already locked in CAF mode, do not trigger HAL.
In HAL2 CAF modes, once focus is locked by an AF trigger, additional
triggers will not cause AF notifications, since the state will not
change again until a cancelAutofocus call.
Since the old API still expects to see a notification, short-circuit
this at the service and send an immediate success notification.
Bug:
7318298
Change-Id: Ib209a24eaf2a35a247d06aea671efe80a33d751e
The Android Automerger [Fri, 12 Oct 2012 13:59:17 +0000 (06:59 -0700)]
merge in jb-mr1-release history after reset to jb-mr1-dev
James Dong [Fri, 12 Oct 2012 03:28:50 +0000 (20:28 -0700)]
Fix some missing checks against missing codecs
o related-to-bug:
6971073
Change-Id: Ia6d926663231f9a9ef31c82c85c70595c4a30ebe
The Android Automerger [Thu, 11 Oct 2012 14:03:39 +0000 (07:03 -0700)]
merge in jb-mr1-release history after reset to jb-mr1-dev
Eino-Ville Talvala [Thu, 11 Oct 2012 00:17:01 +0000 (17:17 -0700)]
Camera2: Don't error out of startPreview when already recording.
Bug:
7327474
Change-Id: I603da5b8bd58e5a700d7ae0b3d34bd89bbcb1d53
Jean-Michel Trivi [Wed, 10 Oct 2012 23:30:19 +0000 (16:30 -0700)]
Merge "Support querying active record sources" into jb-mr1-dev
Eino-Ville Talvala [Wed, 10 Oct 2012 22:28:53 +0000 (15:28 -0700)]
Camera2: Don't let unlocks happen during recording.
Bug:
7309020
Change-Id: I6e66809b868d2e8f47f71e6f8752b44ec06dfb17
The Android Automerger [Wed, 10 Oct 2012 21:06:30 +0000 (14:06 -0700)]
merge in jb-mr1-release history after reset to jb-mr1-dev
Eino-Ville Talvala [Tue, 9 Oct 2012 06:58:02 +0000 (23:58 -0700)]
Camera2: Do not set auto-white-balance regions from metering regions.
Per API documentation, metering regions are only for AE, not also for AWB.
Bug:
7312720
Change-Id: I39bcf33e4c81e80022f45e8fca77ea6cf9ba115e
Jean-Michel Trivi [Wed, 10 Oct 2012 19:11:16 +0000 (12:11 -0700)]
Support querying active record sources
Add support for querying whether there is currently a recording
underway from the specified audio source.
Bug
7314859
Change-Id: I986b231a10ffd368b08ec2f9c7f348d28eaeb892
Eino-Ville Talvala [Wed, 10 Oct 2012 05:16:58 +0000 (22:16 -0700)]
Camera: Limit valid caller PIDs for camera clients.
Narrow down on PID checks to avoid cases where service can access the
camera even though it shouldn't be able to, per API semantics.
Bug:
6970469
Change-Id: Ic468a31949c28ef978b6ed48a70e4601c7ced684
The Android Automerger [Wed, 10 Oct 2012 13:59:19 +0000 (06:59 -0700)]
merge in jb-mr1-release history after reset to jb-mr1-dev
Eino-Ville Talvala [Wed, 10 Oct 2012 04:57:37 +0000 (21:57 -0700)]
Merge "Camera: Clear Hardware device pointer when initialization fails" into jb-mr1-dev
Andreas Huber [Tue, 9 Oct 2012 23:11:27 +0000 (16:11 -0700)]
Merge "Switch audio mode based on dongle's capabilities" into jb-mr1-dev
The Android Automerger [Tue, 9 Oct 2012 23:07:19 +0000 (16:07 -0700)]
merge in jb-mr1-release history after reset to jb-mr1-dev
Andreas Huber [Tue, 9 Oct 2012 22:53:34 +0000 (15:53 -0700)]
Switch audio mode based on dongle's capabilities
properly parse rtp port and use it to setup session.
Change-Id: Ic7521cb867143278196c3ce4b19a74ecc2703d8e
related-to-bug:
7318719
The Android Automerger [Tue, 9 Oct 2012 22:38:51 +0000 (15:38 -0700)]
merge in jb-mr1-release history after reset to jb-mr1-dev
Eino-Ville Talvala [Tue, 9 Oct 2012 22:22:46 +0000 (15:22 -0700)]
Merge "Camera2: Fix uninitialized parameters." into jb-mr1-dev
Igor Murashkin [Tue, 9 Oct 2012 21:45:37 +0000 (14:45 -0700)]
Camera: Clear Hardware device pointer when initialization fails
When disconnecting, don't try to call device functions if the initialization
fails since this can lead to internal HAL segfaults.
Bug:
7317107
Change-Id: Ib65db7eb6556ee10d844959934b1bfd7bb08d0ff
Igor Murashkin [Tue, 9 Oct 2012 20:49:28 +0000 (13:49 -0700)]
Merge "Camera2: Call onAutoFocus immediately for fixed-focus cameras" into jb-mr1-dev
Eino-Ville Talvala [Tue, 9 Oct 2012 19:52:16 +0000 (12:52 -0700)]
Camera2: Fix uninitialized parameters.
Some parameters were not being set to default values, causing strange
flakiness in any app that wasn't calling setParameters. This includes
many CTS tests.
Bug:
6970468
Change-Id: If91635afc000e23862e7b039292a55349274c5ee
Eino-Ville Talvala [Tue, 9 Oct 2012 19:12:07 +0000 (12:12 -0700)]
Merge "Camera2: Move non-ZSL shutter sound firing to be later." into jb-mr1-dev
Eric Laurent [Tue, 9 Oct 2012 18:28:53 +0000 (11:28 -0700)]
Merge "audio policy: deprecate ro.camera.sound.forced" into jb-mr1-dev
Igor Murashkin [Tue, 9 Oct 2012 01:05:12 +0000 (18:05 -0700)]
Camera2: Call onAutoFocus immediately for fixed-focus cameras
Bug:
7311578
Change-Id: Ib8a8ea1f5fc269abdd24ed1e0370dc9b87b284ee
The Android Automerger [Tue, 9 Oct 2012 13:59:19 +0000 (06:59 -0700)]
merge in jb-mr1-release history after reset to jb-mr1-dev
Eino-Ville Talvala [Tue, 9 Oct 2012 05:20:47 +0000 (22:20 -0700)]
Merge "Camera2: Always disconnect in the client destructor" into jb-mr1-dev
Eino-Ville Talvala [Mon, 8 Oct 2012 05:43:48 +0000 (22:43 -0700)]
Camera2: Move non-ZSL shutter sound firing to be later.
Instead of firing shutter sound when capture request is submitted for
non-ZSL captures, fire it when the metadata frame is received. This
guarantees that the shutter sound fires after picture capture is
completed by the sensor.
Bug:
7259900
Change-Id: I4a1eeed89ed0400bf80b0f0cc2d5799c3d9bb9e3
Eric Laurent [Mon, 8 Oct 2012 23:00:36 +0000 (16:00 -0700)]
audio policy: deprecate ro.camera.sound.forced
The volume and routing policy of AUDIO_STREAM_ENFORCED_AUDIBLE is
now controlled by AudioService.
Do not read ro.camera.sound.forced is not needed anymore.
Bug
7032634.
Change-Id: Ic0a6396fc4b6efb91cdb4dffe0c8eb035d0440bd
Igor Murashkin [Mon, 8 Oct 2012 22:09:46 +0000 (15:09 -0700)]
Camera2: Always disconnect in the client destructor
If Camera2Client failed to initialize, it would skip disconnect step,
and thus the camera would be forever marked as busy. By always calling
disconnect it will always call free.
It also adds a new guarantee that Client::disconnect is idempotent
Bug:
7298182
Change-Id: Ic9876f1665b7d9b3c0da692880f63f165e3f4fa5
Igor Murashkin [Mon, 8 Oct 2012 21:08:32 +0000 (14:08 -0700)]
Camera2: isSmoothZoomSupported should return FALSE
Bug:
7308024
Change-Id: Ib757bef8f6dc203f8dfa6ea6d11191e3c7cfcc6d
Alex Ray [Mon, 8 Oct 2012 19:04:15 +0000 (12:04 -0700)]
Camera2: Set default flash mode to FLASH_OFF
Bug:
6970090
Change-Id: I904b1be2ee0710e82e8e647753a705184c10b46c
Igor Murashkin [Mon, 8 Oct 2012 20:10:48 +0000 (13:10 -0700)]
Merge "Camera2: Fix Parameters#setZoom off by 1 validation error" into jb-mr1-dev
Eino-Ville Talvala [Mon, 8 Oct 2012 19:17:36 +0000 (12:17 -0700)]
Merge "Camera2: On stopping preview, wait until captures are completed." into jb-mr1-dev
Igor Murashkin [Mon, 8 Oct 2012 18:16:03 +0000 (11:16 -0700)]
Camera2: Fix Parameters#setZoom off by 1 validation error
Bug:
7298683
Change-Id: If79ac6396379593eb852f041ca7d5a20ad2f9e6d
Igor Murashkin [Mon, 8 Oct 2012 17:23:06 +0000 (10:23 -0700)]
Merge "Camera2: Report getMaxNumFocusAreas 0 for fixed focus cameras" into jb-mr1-dev
Eino-Ville Talvala [Fri, 5 Oct 2012 19:03:10 +0000 (12:03 -0700)]
Camera2: On stopping preview, wait until captures are completed.
If preview is stopped while a still capture or a video snapshot is
underway, wait until the capture completes before stopping preview.
Also use the same behavior for disconnect - do not shut down the
camera device until captures are complete.
This works around HAL implementations which report to be done
(get_in_progress_count returns 0) even when a capture is still
outstanding.
Bug:
7276954
Change-Id: I66290acf1740cc330eadecbcded0c59fa9c5d2fd
The Android Automerger [Mon, 8 Oct 2012 01:57:53 +0000 (18:57 -0700)]
merge in jb-mr1-release history after reset to jb-mr1-dev
ty.lee [Mon, 1 Oct 2012 04:54:14 +0000 (13:54 +0900)]
audioflinger/resampler: add build source for libaudio-resampler
Bug:
7229644
Change-Id: I93bde36be1c3ec84174a4c98423e28f8b3d8782f
Signed-off-by: ty.lee <ty.lee@lge.com>
Signed-off-by: Iliyan Malchev <malchev@google.com>
The Android Automerger [Sun, 7 Oct 2012 13:59:17 +0000 (06:59 -0700)]
merge in jb-mr1-release history after reset to jb-mr1-dev
Eino-Ville Talvala [Sat, 6 Oct 2012 20:50:31 +0000 (13:50 -0700)]
Camera2: Fix off-by-one error in ZSL selection.
Bug:
7258126
Change-Id: Ie6da4645c46a7bb0dbd11d7c6183e904f41f74fd
Igor Murashkin [Sat, 6 Oct 2012 00:09:09 +0000 (17:09 -0700)]
Camera2: Report getMaxNumFocusAreas 0 for fixed focus cameras
Bug:
7298805
Change-Id: I7499b80a9416bf454c8ea80c31ea4fdd3c4ee2d7
Eino-Ville Talvala [Fri, 5 Oct 2012 00:01:25 +0000 (17:01 -0700)]
Camera2: Unconditionally shut down streams on disconnect.
stopPreviewL may do nothing in certain states. Stop streams directly
to avoid those failures, so that we always maintain the HAL interface
invariant that streams referenced by in-flight requests are never
deleted.
Bug:
7276954
Change-Id: Ic4cffc43036f4944684d941981a43d6dd1dce7af
Igor Murashkin [Fri, 28 Sep 2012 22:30:03 +0000 (15:30 -0700)]
Camera2: Fix metering regions to take into account the current zoom/crop region
Also adds a quirk to disable this fix to work around for incompliant HALs
Bug:
7246065
Change-Id: I80bad25e56ba59149270238e5639bb33cae495ae
Igor Murashkin [Fri, 5 Oct 2012 17:44:57 +0000 (10:44 -0700)]
Camera2: Don't promote weak IBinder ptrs to strong ones
The Binder driver does not support promoting weak pointers into strong
pointers. Occassionally the system would lock up when trying to do this
(when closing the camera app).
Bug:
7289040
Change-Id: I8bc0b5c48616bf0b7f4eed1878ad4994ee635871
Igor Murashkin [Thu, 4 Oct 2012 21:22:18 +0000 (14:22 -0700)]
Camera2: Change policy for calculating previewFpsRange from previewFps
Bug:
7259959
Change-Id: I759a559d7115201264f88db1f23edc2d6aef6c43
Igor Murashkin [Fri, 5 Oct 2012 18:35:53 +0000 (11:35 -0700)]
Merge "Camera2: Don't promote weak IBinder ptrs to strong ones" into jb-mr1-dev
Igor Murashkin [Fri, 5 Oct 2012 17:44:57 +0000 (10:44 -0700)]
Camera2: Don't promote weak IBinder ptrs to strong ones
The Binder driver does not support promoting weak pointers into strong
pointers. Occassionally the system would lock up when trying to do this
(when closing the camera app).
Bug:
7289040
Change-Id: I8bc0b5c48616bf0b7f4eed1878ad4994ee635871
The Android Automerger [Fri, 5 Oct 2012 13:59:26 +0000 (06:59 -0700)]
merge in jb-mr1-release history after reset to jb-mr1-dev
Igor Murashkin [Wed, 3 Oct 2012 23:02:09 +0000 (16:02 -0700)]
Camera2: Fix deadlock while zooming during record
Acquired SharedParameters before mMutex in StreamingProcessor,
this avoids any potential deadlocks since Camera2Client code would
always acquire SharedParameters first before invoking StreamingProcessor.
Bug:
7275259
Change-Id: Ia741162c455300378bee049f063590ece5328b95
Eino-Ville Talvala [Thu, 4 Oct 2012 07:56:40 +0000 (00:56 -0700)]
Camera2: Use the triggerAfWithAuto quirk
When this quirk is set, and a scene mode is enabled, do AF calls with
AF mode AUTO instead of whatever the scene more override AF mode is.
Bug:
7159577
Change-Id: I3ea6b8386abc0968047fc9bba3a35c5db5bdcfd3
Eino-Ville Talvala [Tue, 2 Oct 2012 20:30:28 +0000 (13:30 -0700)]
Camera2: Synchronize mode changes and triggers
Make sure that changes to various parameters have reached the HAL
before triggering asynchronous events like autofocus or precapture
metering.
Bug:
7107220
Change-Id: I3c50038de1671968eb32004ce538435121934e7e
Eino-Ville Talvala [Thu, 4 Oct 2012 23:30:46 +0000 (16:30 -0700)]
Merge "Camera2: Include JPEG settings in ZSL requests." into jb-mr1-dev
Andreas Huber [Thu, 4 Oct 2012 21:45:55 +0000 (14:45 -0700)]
Merge "Optionally emit LPCM audio instead of using AAC in wifi display code" into jb-mr1-dev
Eino-Ville Talvala [Thu, 4 Oct 2012 20:21:08 +0000 (13:21 -0700)]
Camera2: Include JPEG settings in ZSL requests.
Bug:
7287743
Change-Id: I1aba81b228451c3df712ce1f42b7aab79cac575f
Andreas Huber [Thu, 4 Oct 2012 18:46:29 +0000 (11:46 -0700)]
Optionally emit LPCM audio instead of using AAC in wifi display code
related-to-bug:
7248248
May decrease power usage at the cost of significantly increasing audio bitrate.
Use "adb shell setprop media.wfd.use-pcm-audio true"
to turn it on (must be done before connecting).
Change-Id: I7ebeadf3209e01522a2644948287b23d7c383c7e
Glenn Kasten [Thu, 4 Oct 2012 18:16:36 +0000 (11:16 -0700)]
Merge "Integrate improved coefficient sinc resampler: VHQ" into jb-mr1-dev
Igor Murashkin [Thu, 4 Oct 2012 16:56:44 +0000 (09:56 -0700)]
Merge "Camera2: Fix deadlock while zooming during record" into jb-mr1-dev
Glenn Kasten [Mon, 1 Oct 2012 21:04:31 +0000 (14:04 -0700)]
Integrate improved coefficient sinc resampler: VHQ
Summary:
Very high quality is enabled only for 44.1 -> 48 or 48 -> 44.1,
and uses low quality for all other use cases.
Track estimated CPU load and throttles the quality based on load;
as currently configured it should allow up to 2 instances of very high quality.
Medium quality and high quality are currently disabled unless explicitly requested.
Details:
Only load .so the first time it is needed.
Cleanup code style: formatting, indentation, whitespace.
Restore medium quality resampler, but it is not used (see next line).
Fix memory leak for sinc resampler.
Check sample rate in resampler constructor.
Add logs for debugging.
Rename DEFAULT to DEFAULT_QUALITY for consistency with other quality levels.
Renumber VERY_HIGH_QUALITY from 255 to 4.
Use enum src_quality consistently.
Improve parsing of property af.resampler.quality.
Fix reentrancy bug - allow an instance of high quality and an instance
of very high quality to both be active concurrently.
Bug:
7229644
Change-Id: I0ce6b913b05038889f50462a38830b61a602a9f7
The Android Automerger [Thu, 4 Oct 2012 13:59:31 +0000 (06:59 -0700)]
merge in jb-mr1-release history after reset to jb-mr1-dev
James Dong [Wed, 3 Oct 2012 23:57:35 +0000 (16:57 -0700)]
Merge "Enable hdcp for WiFi display" into jb-mr1-dev
Igor Murashkin [Wed, 3 Oct 2012 23:02:09 +0000 (16:02 -0700)]
Camera2: Fix deadlock while zooming during record
Acquired SharedParameters before mMutex in StreamingProcessor,
this avoids any potential deadlocks since Camera2Client code would
always acquire SharedParameters first before invoking StreamingProcessor.
Bug:
7275259
Change-Id: Ia741162c455300378bee049f063590ece5328b95
Eino-Ville Talvala [Wed, 3 Oct 2012 21:59:29 +0000 (14:59 -0700)]
Camera2: Properly update FPS range when FPS is set.
Otherwise a getParameters followed by setParameters will trigger an
incorrect reversion in FPS parameters.
Bug:
7279267
Change-Id: I7426860f05497dbdf4245c34cef1b38f2f5a1832
Dave Burke [Wed, 3 Oct 2012 01:39:39 +0000 (18:39 -0700)]
Drop video bitrate to 2.5mbps.
We have too much corruption/loss at higher bitrates. Reviewed quality
trade-off with jdong@. We can increase in the future if we have a
better packet loss concealment solution.
Bug:
7241844
Change-Id: I3b500a9c3a4429e834fb4c5ca04164d4e106fa9e
Andreas Huber [Wed, 3 Oct 2012 17:16:58 +0000 (10:16 -0700)]
Better power savings with wifi display code.
No more polling the encoder for work to do, the encoder instead notifies
if there's activity.
Change-Id: Ia707211b4f5c5a6e6b70d750233d204a2d6bb778
related-to-bug:
7248248
Andreas Huber [Wed, 3 Oct 2012 16:01:11 +0000 (09:01 -0700)]
Increase polling frequency again temporarily to fix A/V issues
Fixes a bug in the silence detection and increases the timeout after which
we enter "silent mode" to 10 secs.
Change-Id: I802b058f054becd5c377186664437f7b3970193f
related-to-bug:
7248248
Eino-Ville Talvala [Wed, 3 Oct 2012 22:20:38 +0000 (15:20 -0700)]
Merge "Camera2: Properly update FPS range when FPS is set." into jb-mr1-dev
Eino-Ville Talvala [Wed, 3 Oct 2012 21:59:29 +0000 (14:59 -0700)]
Camera2: Properly update FPS range when FPS is set.
Otherwise a getParameters followed by setParameters will trigger an
incorrect reversion in FPS parameters.
Bug:
7279267
Change-Id: I7426860f05497dbdf4245c34cef1b38f2f5a1832
Alex Ray [Wed, 3 Oct 2012 06:30:07 +0000 (23:30 -0700)]
Camera2: Fix prematurely clearing stream request
Zsl handling was clearing the stream request before a capture request
was ready to be sent to the HAL, which would cause capture delays and
timeouts in certain conditions.
Bug:
7259520
Change-Id: Idde8bc4fc58b8b426c6985feac87759740e338ea
James Dong [Wed, 3 Oct 2012 19:08:40 +0000 (12:08 -0700)]
Enable hdcp for WiFi display
o related-to-bug:
7055369
Change-Id: Ie1ddd1e961f9ff60fe32b57cf7f8de4f4ecf5aa0
Igor Murashkin [Tue, 2 Oct 2012 22:21:31 +0000 (15:21 -0700)]
Camera2: Fix trying to release HAL stream twice
When we fail to disconnect the native window, StreamAdapter::release
would fail and remain in the old (ALLOCATED) state, thus it thinks that
we haven't released the HAL stream yet.
With this change, ignore DEAD_OBJECT native window disconnect failures,
so the state transitions to RELEASED and we don't double release HAL
streams.
Bug:
7258314
Change-Id: I524893e4b4d6463d7b0a7ce32fb6f658afba8e11
Igor Murashkin [Tue, 2 Oct 2012 23:05:11 +0000 (16:05 -0700)]
Camera2: Handle client processes dying by closing camera resources
CameraService now subscribes to binder death notifications
for each client, and disconnects the client if the death happened
without cleanly shutting down the client first.
Bug:
7258314
Change-Id: I7803836b589fd8f0dfe00f6c28a707b82012e751
Igor Murashkin [Wed, 3 Oct 2012 02:07:14 +0000 (19:07 -0700)]
Camera2: Don't change state when reconnect is called
Bug:
7252802
Change-Id: Ibed4f59a96bef75bf84b1aaf1235fb87e94102ef
Andreas Huber [Wed, 3 Oct 2012 17:54:30 +0000 (10:54 -0700)]
Merge "Drop video bitrate to 2.5mbps." into jb-mr1-dev
Eino-Ville Talvala [Wed, 3 Oct 2012 17:52:12 +0000 (10:52 -0700)]
Merge "Camera2: Use ZSL format quirk." into jb-mr1-dev
Dave Burke [Wed, 3 Oct 2012 01:39:39 +0000 (18:39 -0700)]
Drop video bitrate to 2.5mbps.
We have too much corruption/loss at higher bitrates. Reviewed quality
trade-off with jdong@. We can increase in the future if we have a
better packet loss concealment solution.
Bug:
7241844
Change-Id: I3b500a9c3a4429e834fb4c5ca04164d4e106fa9e
Andreas Huber [Wed, 3 Oct 2012 17:43:33 +0000 (10:43 -0700)]
Merge "Better power savings with wifi display code." into jb-mr1-dev
Andreas Huber [Wed, 3 Oct 2012 17:16:58 +0000 (10:16 -0700)]
Better power savings with wifi display code.
No more polling the encoder for work to do, the encoder instead notifies
if there's activity.
Change-Id: Ia707211b4f5c5a6e6b70d750233d204a2d6bb778
related-to-bug:
7248248
Andreas Huber [Wed, 3 Oct 2012 16:50:51 +0000 (09:50 -0700)]
Merge "Increase polling frequency again temporarily to fix A/V issues" into jb-mr1-dev
Andreas Huber [Wed, 3 Oct 2012 16:01:11 +0000 (09:01 -0700)]
Increase polling frequency again temporarily to fix A/V issues
Fixes a bug in the silence detection and increases the timeout after which
we enter "silent mode" to 10 secs.
Change-Id: I802b058f054becd5c377186664437f7b3970193f
related-to-bug:
7248248
The Android Automerger [Wed, 3 Oct 2012 13:59:31 +0000 (06:59 -0700)]
merge in jb-mr1-release history after reset to jb-mr1-dev
Eino-Ville Talvala [Wed, 3 Oct 2012 01:14:49 +0000 (18:14 -0700)]
Camera2: Use ZSL format quirk.
Switch service to using HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED,
unless ZSL quirk is set.
This is important for compatibility across multiple implementations.
Bug:
6243944
Change-Id: Iea74671cbb44890a07e4f99cd757b0a5423d447a
Eino-Ville Talvala [Wed, 3 Oct 2012 00:36:25 +0000 (17:36 -0700)]
Merge "Camera2: Use scene mode override parameter" into jb-mr1-dev