OSDN Git Service
Ingrid Gallardo [Thu, 24 Nov 2016 01:38:15 +0000 (17:38 -0800)]
msm: mdss: add support to set mdp clock rate before enable
Current clock driver requires that before enabling
the core clock after power collapse, the set rate
must be called. Ensure this sequence by always calling
the set rate for the mdp core clock before enable.
Change-Id: I872f18235b0b1685dfdee3de99827d031077a012
Signed-off-by: Ingrid Gallardo <ingridg@codeaurora.org>
Linux Build Service Account [Mon, 21 Nov 2016 17:18:58 +0000 (09:18 -0800)]
Merge "msm: gsi: fix interrupt processing"
Linux Build Service Account [Mon, 21 Nov 2016 17:18:57 +0000 (09:18 -0800)]
Merge "clk: qcom: Add set_flags ops for the clk_gate2_ops"
Linux Build Service Account [Mon, 21 Nov 2016 17:18:57 +0000 (09:18 -0800)]
Merge "ARM: dts: msm: Add DT for mediabox variant of apqcobalt"
Linux Build Service Account [Mon, 21 Nov 2016 17:18:56 +0000 (09:18 -0800)]
Merge "msm: ipa: add api for getting IPA pdev"
Skylar Chang [Fri, 18 Nov 2016 18:56:51 +0000 (10:56 -0800)]
msm: gsi: fix interrupt processing
Fix GSI interrupt processing to make sure interrupt are
not missed. In order to achieve that interrupt should first be
cleared before processed.
Change-Id: I42978f2230e95456e4b4e932365e5b2c83445f56
CRs-Fixed:
1090894
Acked-by: Ady Abraham <adya@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Amit Nischal [Thu, 17 Nov 2016 09:47:05 +0000 (15:17 +0530)]
clk: qcom: Add set_flags ops for the clk_gate2_ops
Gate clocks would also require to set the flags using
clk_set_flags. Add the clk_ops for the same.
Change-Id: I9d180e4aedb17692eb2e48f98461239d29bbf975
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Linux Build Service Account [Mon, 21 Nov 2016 01:44:55 +0000 (17:44 -0800)]
Merge "ARM: dts: msm: change UFS/SDHC2 power supply for msmcobalt interposer QRD"
Linux Build Service Account [Sat, 19 Nov 2016 15:36:59 +0000 (07:36 -0800)]
Merge "ARM: dts: msm: add charger/fg device nodes for PMFALCON"
Linux Build Service Account [Sat, 19 Nov 2016 04:32:06 +0000 (20:32 -0800)]
Merge "ASoC: msm: q6dspv2: fix potentional information leak"
Linux Build Service Account [Sat, 19 Nov 2016 04:32:05 +0000 (20:32 -0800)]
Merge "ASoC: wcd934x: Fix adie loopback through sidetone src path"
Linux Build Service Account [Sat, 19 Nov 2016 04:32:04 +0000 (20:32 -0800)]
Merge "Asoc: clean up bootup errors"
Linux Build Service Account [Sat, 19 Nov 2016 04:32:03 +0000 (20:32 -0800)]
Merge "Revert "defconfig: msm: avoid compilation of MDSS DP driver for 32-bit msmfalcon""
Linux Build Service Account [Sat, 19 Nov 2016 04:32:03 +0000 (20:32 -0800)]
Merge "ARM: dts: msm: Add support for USB device for msmfalcon and msmtriton"
Linux Build Service Account [Sat, 19 Nov 2016 04:32:02 +0000 (20:32 -0800)]
Merge "ARM: dts: msm: enable mdss power supplies for falcon track3"
Linux Build Service Account [Sat, 19 Nov 2016 04:32:01 +0000 (20:32 -0800)]
Merge "usb: pd: Don't suspend charging unless changing voltages"
Linux Build Service Account [Sat, 19 Nov 2016 04:32:00 +0000 (20:32 -0800)]
Merge "iio: rradc: Update reading USBIN_V channel"
Linux Build Service Account [Sat, 19 Nov 2016 04:31:59 +0000 (20:31 -0800)]
Merge "icnss: Reset mpm_wcssaon_config bits before top level reset"
Linux Build Service Account [Sat, 19 Nov 2016 04:31:58 +0000 (20:31 -0800)]
Merge "qcom-charger: smb2: Disable try.SINK mode in the probe"
Linux Build Service Account [Sat, 19 Nov 2016 04:31:58 +0000 (20:31 -0800)]
Merge "msm: ipa3: header file change for wdi-stats"
Linux Build Service Account [Sat, 19 Nov 2016 04:31:57 +0000 (20:31 -0800)]
Merge "ARM: dts: msm: Set USB core clock rate for USB2/USB3 for msm8996"
Linux Build Service Account [Sat, 19 Nov 2016 04:31:56 +0000 (20:31 -0800)]
Merge "ARM: dts: msm: Add gladiator support on msmfalcon and msmtriton"
Linux Build Service Account [Sat, 19 Nov 2016 04:31:55 +0000 (20:31 -0800)]
Merge "ARM: dts: msm: Correct interrupt assignments for msmcobalt"
Linux Build Service Account [Sat, 19 Nov 2016 04:31:54 +0000 (20:31 -0800)]
Merge "clk: qcom: Add support for RCGs with dynamic and fixed sources"
Linux Build Service Account [Sat, 19 Nov 2016 04:31:54 +0000 (20:31 -0800)]
Merge "qcom-charger: WA for legacy bit set on hard reboot"
Linux Build Service Account [Sat, 19 Nov 2016 04:31:53 +0000 (20:31 -0800)]
Merge "usb: phy: qusb: Make sure QUSB PHY is into proper state"
Linux Build Service Account [Sat, 19 Nov 2016 04:31:52 +0000 (20:31 -0800)]
Merge "USB: phy: qusb: Turn on vdd along with 1p8/3p3 LDOs when PMI requests"
Linux Build Service Account [Sat, 19 Nov 2016 04:31:51 +0000 (20:31 -0800)]
Merge "soc: qcom: smem: Redesign smem memory architecture"
Linux Build Service Account [Sat, 19 Nov 2016 04:31:50 +0000 (20:31 -0800)]
Merge "ARM: dts: msm: Update the console uart gpios for msmfalcon"
Linux Build Service Account [Sat, 19 Nov 2016 04:31:50 +0000 (20:31 -0800)]
Merge "msm: mdss: move warnings and errors out of mdss spinlock"
Linux Build Service Account [Sat, 19 Nov 2016 04:31:49 +0000 (20:31 -0800)]
Merge "msm: mdss: fix pp timeout during transition from LP1 to power on"
Linux Build Service Account [Sat, 19 Nov 2016 04:31:48 +0000 (20:31 -0800)]
Merge "msm: mdss: fix autorefresh disable during handoff"
Linux Build Service Account [Sat, 19 Nov 2016 04:31:45 +0000 (20:31 -0800)]
Merge "ASoC: wcd-mbhc: correct cross connection check"
Service qcabuildsw [Fri, 18 Nov 2016 23:41:21 +0000 (15:41 -0800)]
Merge "msm: wlan: update regulatory database" into msm-4.4
Ashay Jaiswal [Fri, 18 Nov 2016 04:30:49 +0000 (10:00 +0530)]
ARM: dts: msm: add charger/fg device nodes for PMFALCON
Add charger/FG device nodes along with the necessary
configuration.
Keep all these nodes disabled for simulator/RUMI platform.
CRs-fixed:
1091731
Change-Id: I9c751d777d8402cdea3cdfb27da1a19a98a250e2
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Linux Build Service Account [Fri, 18 Nov 2016 09:55:05 +0000 (01:55 -0800)]
Merge "msm: kgsl: Make sure USE_CPU_MAP + MAP_USER_MEM work together"
Linux Build Service Account [Fri, 18 Nov 2016 09:55:03 +0000 (01:55 -0800)]
Merge "msm: kgsl: Fix pagetable member of struct kgsl_memdesc"
Linux Build Service Account [Fri, 18 Nov 2016 09:55:02 +0000 (01:55 -0800)]
Merge "ARM: dts: msm: Enable auto GM for WLED in pmicobalt"
Linux Build Service Account [Fri, 18 Nov 2016 09:55:01 +0000 (01:55 -0800)]
Merge "leds: qpnp-wled: Add support to configure auto PFM for pmicobalt"
Linux Build Service Account [Fri, 18 Nov 2016 09:55:00 +0000 (01:55 -0800)]
Merge "msm: ipa3: linearize large skbs"
Linux Build Service Account [Fri, 18 Nov 2016 09:55:00 +0000 (01:55 -0800)]
Merge "msm: mdss: hide additional kernel addresses from unprivileged users"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:58 +0000 (01:54 -0800)]
Merge "ASoC: msm: Fix sound card registration failure"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:58 +0000 (01:54 -0800)]
Merge "msm: sde: remove secure camera ctrl_id definition"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:57 +0000 (01:54 -0800)]
Merge "ARM: dts: msm: Add ufs regulators for msmfalcon interposer"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:56 +0000 (01:54 -0800)]
Merge "usb: pd: Stop processing SVDM if handler found"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:54 +0000 (01:54 -0800)]
Merge "sched/hmp: Enhance co-location and scheduler boost features"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:54 +0000 (01:54 -0800)]
Merge "USB: Allow skipping device resume during system resume"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:53 +0000 (01:54 -0800)]
Merge "clk: msm: Add the CLKFLAG_NO_RATE_CACHE flag for MM clocks on MSM COBALT"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:52 +0000 (01:54 -0800)]
Merge "clk: qcom: Add support to be able to slew PLL"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:51 +0000 (01:54 -0800)]
Merge "qseecom: improve error checks in qseecom_probe()"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:50 +0000 (01:54 -0800)]
Merge "msm: mdss: Add systrace for readptr_done"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:50 +0000 (01:54 -0800)]
Merge "ARM: dts: msm: Add physical dimensions for NT35597 panel"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:48 +0000 (01:54 -0800)]
Merge "msm: mdss: fix incorrect mutex unlocking during NOTIFY_UPDATE_STOP"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:47 +0000 (01:54 -0800)]
Merge "msm: mdss: fix race condition in dsi clk off request"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:46 +0000 (01:54 -0800)]
Merge "ARM: dts: msm: specify I2C configuration for msmfalcon"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:45 +0000 (01:54 -0800)]
Merge "ARM: dts: msm: specify UART configuration on msmfalcon."
Linux Build Service Account [Fri, 18 Nov 2016 09:54:43 +0000 (01:54 -0800)]
Merge "clk: qcom: Add support for debugfs support"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:42 +0000 (01:54 -0800)]
Merge "clk: Add support to allow client to print all enabled clocks"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:42 +0000 (01:54 -0800)]
Merge "scsi: ufs: enable auto hibern8 only after device initialization"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:41 +0000 (01:54 -0800)]
Merge "scsi: ufs: fix sleep in atomic context"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:37 +0000 (01:54 -0800)]
Merge "phy: qcom-ufs: update ufs phy 1-lane settings"
Linux Build Service Account [Fri, 18 Nov 2016 09:54:35 +0000 (01:54 -0800)]
Merge "diag: Set the diag write buffers to busy state on channel close"
xiaonian [Wed, 16 Nov 2016 03:23:59 +0000 (11:23 +0800)]
ARM: dts: msm: change UFS/SDHC2 power supply for msmcobalt interposer QRD
Change the power supply for msmcobalt QRD interposer platform
to use regulators from pmfalcon.
CRs-Fixed:
1090535
Change-Id: Ib1fdb0454c6e1d770ea6ec11a6032f8553d56c06
Signed-off-by: xiaonian <xiaonian@codeaurora.org>
Ashish Garg [Tue, 15 Nov 2016 06:03:01 +0000 (11:33 +0530)]
ARM: dts: msm: enable mdss power supplies for falcon track3
Specify the regulators for mdss on falcon track3.
Change-Id: Ie828c8568ef09c89cff157d16d3cb322647b6f6e
Signed-off-by: Ashish Garg <ashigarg@codeaurora.org>
Anirudh Ghayal [Tue, 15 Nov 2016 14:10:48 +0000 (19:40 +0530)]
ARM: dts: msm: Add dummy regulator for LCDB bias
Add the LDO and NCP display +ve and -ve bias for LCD
display.
Change-Id: Ia85688854f26fe871d5c1253c2d51d75d84deb8f
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Chandana Kishori Chiluveru [Fri, 21 Oct 2016 04:29:35 +0000 (09:59 +0530)]
ARM: dts: msm: Add support for USB device for msmfalcon and msmtriton
Add common dtsi file for msmfalcon and msmtriton. Also Add
device tree entry for super speed USB3 controller, super speed
phy and high speed phy.
Change-Id: I326eceeddff8e77d346c3365fa46cd539324451f
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Jack Pham [Thu, 17 Nov 2016 21:19:49 +0000 (13:19 -0800)]
usb: pd: Don't suspend charging unless changing voltages
To optimize charging during power negotiation and the voltage
is not changing, for example when transitioning from implicit
contract to the default 5V PDO, there is no requirement to
suspend the charging and hence setting the charger's
PROP_PD_CURRENT_MAX can be avoided. It is only needed when
changing voltages, in which case current limit should be
calculated based on pSnkStdby (2.5W), or when staying at the
same voltage and decreasing current.
Also fix the incorrect setting of PROP_CURRENT_MAX to
PROP_PD_CURRENT_MAX when doing a sink->source swap.
Change-Id: Ib53902459646e590df4dc7fcb00f833d5e8f41ed
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Siddartha Mohanadoss [Wed, 16 Nov 2016 22:04:47 +0000 (14:04 -0800)]
iio: rradc: Update reading USBIN_V channel
Increase the refresh rate for the RRADC to support
reading refreshed USBIN voltage at a higher frequency.
To support the higher frequency at which the data
is refreshed enable continuous mode and force update
on reading every cycle on the USBIN_V trigger.
After reading the USBIN_V result set the RRADC to non
continuous mode with default trigger setting.
Change-Id: I7e9ada5de1f619c6a34a4b2e1764f5e908564ce5
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Yuanyuan Liu [Tue, 15 Nov 2016 01:05:25 +0000 (17:05 -0800)]
icnss: Reset mpm_wcssaon_config bits before top level reset
Clear mpm_wcssaon_config bits before top level reset.
If those bits are non-zero during WLAN is enabled,
there could be random failures.
CRs-Fixed:
1086372
Change-Id: Ia03380dfa4852c80fedb38f3c79f55d8d1a9a7f6
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Harry Yang [Thu, 17 Nov 2016 20:50:04 +0000 (12:50 -0800)]
qcom-charger: smb2: Disable try.SINK mode in the probe
Currently we disable try.SINK right before pd becomes active and
re-enable it right after inactive. This breaks typec compliance.
To fix it, disable try.SINK mode in the probe and never enable it.
Change-Id: I61523188f45daca026b90943c845b43a8327f51e
Signed-off-by: Harry Yang <harryy@codeaurora.org>
Harry Yang [Thu, 17 Nov 2016 19:24:25 +0000 (11:24 -0800)]
qcom-charger: Change usb_icl votable for PD vote
Currently there is an issue introduced by forcing the results of
the icl_votable while pd is active. icl_votable is a min voter
and since the DEFAULT_VOTER votes 1.5Amps that becomes the max
one could draw when pd is active. This is incorrect and hence the
issue.
Note that DEFAULT_VOTER is only needed while DCP is present.
So, to fix it, rename DEFAULT_VOTER to DCP_VOTER and make DCP_VOTER
unvote and vote when pd_active is set and unset respectively.
CRs-Fixed:
1091477
Change-Id: I7435f05f20e12a7704ae5d9597b5cdc9b5a61d00
Signed-off-by: Harry Yang <harryy@codeaurora.org>
Amar Singhal [Wed, 16 Nov 2016 19:20:33 +0000 (11:20 -0800)]
msm: wlan: update regulatory database
Incorporate the 2016-10-31 updates to the internal regulatory
database. Update countries Bahrain, Belize, Chile, Egypt, Honduras,
India, S Korea, Nepal, Panama, Russia, Senegal, TT and UAE. Also
update St. Kitts&Navis and St. Lucia dfs region.
Change-Id: Ia151b2dd5229f07790ac961af298305b24e098fb
CRs-Fixed:
1091511
Signed-off-by: Amar Singhal <asinghal@codeaurora.org>
Mohamed Moussa [Thu, 17 Nov 2016 00:54:32 +0000 (16:54 -0800)]
ARM: dts: msm: Add DT for mediabox variant of apqcobalt
Device tree creation of new mediabox variant of
apqcobalt.
CRs-Fixed:
1091110
Change-Id: I4f8070e7fd0aa39664208cfab2448b5a95ab2326
Signed-off-by: Mohamed Moussa <mmouss@codeaurora.org>
Signed-off-by: David Ng <dave@codeaurora.org>
Linux Build Service Account [Thu, 17 Nov 2016 18:08:46 +0000 (10:08 -0800)]
Merge "leds: qpnp-wled: Add support to configure AUTO_GM settings"
Linux Build Service Account [Thu, 17 Nov 2016 18:08:45 +0000 (10:08 -0800)]
Merge "tcp: take care of truncations done by sk_filter()"
Linux Build Service Account [Thu, 17 Nov 2016 18:08:44 +0000 (10:08 -0800)]
Merge "scsi: ufs: handle LINERESET during hibern8"
Linux Build Service Account [Thu, 17 Nov 2016 18:08:43 +0000 (10:08 -0800)]
Merge "scsi: ufs-qcom: update clock scaling sequence"
Linux Build Service Account [Thu, 17 Nov 2016 18:08:42 +0000 (10:08 -0800)]
Merge "ARM: dts: msm: ensure contiguous MSI for PCIe on msmcobalt"
Linux Build Service Account [Thu, 17 Nov 2016 18:08:41 +0000 (10:08 -0800)]
Merge "driver: thermal: msm_thermal: Enable Reliability algorithm"
Linux Build Service Account [Thu, 17 Nov 2016 18:08:40 +0000 (10:08 -0800)]
Merge "leds: qpnp-flash: Fix the mask in the flash prepare API"
Linux Build Service Account [Thu, 17 Nov 2016 18:08:38 +0000 (10:08 -0800)]
Merge "leds: qpnp-flash-v2: change from dev_*() to pr_*() for logging"
Linux Build Service Account [Thu, 17 Nov 2016 18:08:38 +0000 (10:08 -0800)]
Merge "leds: qpnp-flash-v2: Add support for configuring OTST thresholds"
Linux Build Service Account [Thu, 17 Nov 2016 18:08:37 +0000 (10:08 -0800)]
Merge "leds: qpnp-flash-v2: Add support for thermal derate features"
Linux Build Service Account [Thu, 17 Nov 2016 18:08:36 +0000 (10:08 -0800)]
Merge "msm: kgsl: preserve ISENSE registers across GPU power collapse"
Linux Build Service Account [Thu, 17 Nov 2016 18:08:34 +0000 (10:08 -0800)]
Merge "scsi: ufs: error out all issued requests after shutdown"
Dhoat Harpal [Mon, 14 Nov 2016 11:11:04 +0000 (16:41 +0530)]
soc: qcom: smem: Redesign smem memory architecture
Smem uses static array to store legacy partition information.
New comm partition is used to replace existing legacy partition.
CRs-Fixed:
1074985
Change-Id: Ib2268181a617c23d62b5b6f857be5327113b2a67
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>
Fenglin Wu [Thu, 10 Nov 2016 02:17:02 +0000 (10:17 +0800)]
ARM: dts: msm: Enable auto GM for WLED in pmicobalt
Enable auto GM for WLED module in pmicobalt to make LOOP_GM adaptively
changes with brightness change.
CRs-Fixed:
1081738
Change-Id: I10a788726358c56df9bfe11f2332e3823d7cd332
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
Fenglin Wu [Wed, 9 Nov 2016 05:37:08 +0000 (13:37 +0800)]
leds: qpnp-wled: Add support to configure auto PFM for pmicobalt
The WLED boost controller in pmicobalt supports auto PFM mode when
LCD mode is selected. Auto PFM mode is enabled by default except
on some specific hardware versions. Add a property to specify
AUTO_PFM_THRESHOLD for the boost controller so that it can enter
PFM mode when the adaptive headroom voltage falls below the
threshold.
CRs-Fixed:
1081738
Change-Id: I964b3452d0cdb3618b4ab446655ae75fa3a1049d
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
Linux Build Service Account [Thu, 17 Nov 2016 10:22:35 +0000 (02:22 -0800)]
Merge "leds: qpnp-wled: Add support to configure VREF_CONTROL for pmicobalt"
Linux Build Service Account [Thu, 17 Nov 2016 10:22:34 +0000 (02:22 -0800)]
Merge "msm: cpp: Use the src clock node to read the cpp src clock rate"
Linux Build Service Account [Thu, 17 Nov 2016 10:22:34 +0000 (02:22 -0800)]
Merge "ARM: dts: msm: Add cpp src clock rates configuration for msmcobalt"
Padmanabhan Komanduru [Thu, 17 Nov 2016 08:15:50 +0000 (13:45 +0530)]
Revert "defconfig: msm: avoid compilation of MDSS DP driver for 32-bit msmfalcon"
This reverts 'commit
d3c76b29e6d6 ("defconfig: msm: avoid compilation
of MDSS DP driver for 32-bit msmfalcon")'. The compilation of MDSS DP
driver was disabled for 32-bit msmfalcon earlier to avoid compilation
issues. The related issues are now resolved. Hence, enable back the
compilation of DP driver.
Change-Id: I9f928f0aad6af346de43965755beb039e422047a
Signed-off-by: Padmanabhan Komanduru <pkomandu@codeaurora.org>
Laxminath Kasam [Wed, 16 Nov 2016 13:57:44 +0000 (19:27 +0530)]
ASoC: msm: Fix sound card registration failure
In external codec machine driver, register
SSR notifier after sound card register. Also,
add separate snd_soc_card variables for tavil
and tasha since same machine driver is used
for both codecs.
CRs-Fixed:
1083537
Change-Id: I73fc02b812f2e6694e2a6aa8bdad2381a5f19406
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Laxminath Kasam [Mon, 14 Nov 2016 11:52:55 +0000 (17:22 +0530)]
ASoC: msm: Add support for USB/WCN/TDM Audio
Add required machine driver support for
USB Audio, BT, FM, TDM interfaces both
for internal and external codecs.
CRs-Fixed:
1083537
Change-Id: I3d2765535793d6ef9153cfcab4b44a9adad67e15
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Vijayavardhan Vennapusa [Wed, 16 Nov 2016 11:57:59 +0000 (17:27 +0530)]
ARM: dts: msm: Set USB core clock rate for USB2/USB3 for msm8996
Set required USB core clock rate for USB3 working across connect/
disconnect for msm8996. Else USB enumeration fails after reconnection
due to this invalid clock rate setting for USB core clock. Also
set USB core clock rate for USB2 controller as well.
Change-Id: I6ce48512df5973bf8a2a3081a3a6f8759aeb499f
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Venkatesh Yadav Abbarapu [Mon, 14 Nov 2016 06:04:02 +0000 (11:34 +0530)]
ARM: dts: msm: Update the console uart gpios for msmfalcon
Updating the debug uart BLSP1UART2 gpios as per the latest
hardware definitions.
Change-Id: I9cda84d1c199b72ce8b9e2997601bcc7430ddbf3
Signed-off-by: Venkatesh Yadav Abbarapu <vabbar@codeaurora.org>
Venkatesh Yadav Abbarapu [Tue, 15 Nov 2016 05:58:43 +0000 (11:28 +0530)]
pinctrl: qcom: msmfalcon: Update gpios as per latest gpio map
UART and SPI gpios are changed as per latest hardware definitions,
so updating them.
Change-Id: I0e06be169edc2eb1d35ef7fc6c41ff1809aebd03
Signed-off-by: Venkatesh Yadav Abbarapu <vabbar@codeaurora.org>
Venkatesh Yadav Abbarapu [Wed, 16 Nov 2016 12:18:48 +0000 (17:48 +0530)]
ARM: dts: msm: Add gladiator support on msmfalcon and msmtriton
Enable the support for gladiator error reporting. Also enable
the gladiator hang detect feature.
Change-Id: I7220ad565212c325514301e4c59415b807deb99a
Signed-off-by: Venkatesh Yadav Abbarapu <vabbar@codeaurora.org>
Linux Build Service Account [Thu, 17 Nov 2016 02:17:04 +0000 (18:17 -0800)]
Merge "icnss: Update WLFW header file to the latest and add fw_build_id"
Linux Build Service Account [Thu, 17 Nov 2016 02:17:03 +0000 (18:17 -0800)]
Merge "icnss: Collect ramdump from MSA memory space"