OSDN Git Service
Jon Maloy [Wed, 9 Feb 2022 03:22:37 +0000 (22:22 -0500)]
tipc: rate limit warning for received illegal binding update
It would be easy to craft a message containing an illegal binding table
update operation. This is handled correctly by the code, but the
corresponding warning printout is not rate limited as is should be.
We fix this now.
Fixes:
b97bf3fd8f6a ("[TIPC] Initial merge")
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joel Stanley [Wed, 9 Feb 2022 00:03:59 +0000 (10:33 +1030)]
net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE
Fix loading of the driver when built as a module.
Fixes:
f160e99462c6 ("net: phy: Add mdio-aspeed")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 8 Feb 2022 23:28:22 +0000 (15:28 -0800)]
veth: fix races around rq->rx_notify_masked
veth being NETIF_F_LLTX enabled, we need to be more careful
whenever we read/write rq->rx_notify_masked.
BUG: KCSAN: data-race in veth_xmit / veth_xmit
write to 0xffff888133d9a9f8 of 1 bytes by task 23552 on cpu 0:
__veth_xdp_flush drivers/net/veth.c:269 [inline]
veth_xmit+0x307/0x470 drivers/net/veth.c:350
__netdev_start_xmit include/linux/netdevice.h:4683 [inline]
netdev_start_xmit include/linux/netdevice.h:4697 [inline]
xmit_one+0x105/0x2f0 net/core/dev.c:3473
dev_hard_start_xmit net/core/dev.c:3489 [inline]
__dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
br_dev_queue_push_xmit+0x3ce/0x430 net/bridge/br_forward.c:53
NF_HOOK include/linux/netfilter.h:307 [inline]
br_forward_finish net/bridge/br_forward.c:66 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
__br_forward+0x2e4/0x400 net/bridge/br_forward.c:115
br_flood+0x521/0x5c0 net/bridge/br_forward.c:242
br_dev_xmit+0x8b6/0x960
__netdev_start_xmit include/linux/netdevice.h:4683 [inline]
netdev_start_xmit include/linux/netdevice.h:4697 [inline]
xmit_one+0x105/0x2f0 net/core/dev.c:3473
dev_hard_start_xmit net/core/dev.c:3489 [inline]
__dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
neigh_hh_output include/net/neighbour.h:525 [inline]
neigh_output include/net/neighbour.h:539 [inline]
ip_finish_output2+0x6f8/0xb70 net/ipv4/ip_output.c:228
ip_finish_output+0xfb/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:451 [inline]
ip_local_out net/ipv4/ip_output.c:126 [inline]
ip_send_skb+0x6e/0xe0 net/ipv4/ip_output.c:1570
udp_send_skb+0x641/0x880 net/ipv4/udp.c:967
udp_sendmsg+0x12ea/0x14c0 net/ipv4/udp.c:1254
inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
__do_sys_sendmmsg net/socket.c:2582 [inline]
__se_sys_sendmmsg net/socket.c:2579 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff888133d9a9f8 of 1 bytes by task 23563 on cpu 1:
__veth_xdp_flush drivers/net/veth.c:268 [inline]
veth_xmit+0x2d6/0x470 drivers/net/veth.c:350
__netdev_start_xmit include/linux/netdevice.h:4683 [inline]
netdev_start_xmit include/linux/netdevice.h:4697 [inline]
xmit_one+0x105/0x2f0 net/core/dev.c:3473
dev_hard_start_xmit net/core/dev.c:3489 [inline]
__dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
br_dev_queue_push_xmit+0x3ce/0x430 net/bridge/br_forward.c:53
NF_HOOK include/linux/netfilter.h:307 [inline]
br_forward_finish net/bridge/br_forward.c:66 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
__br_forward+0x2e4/0x400 net/bridge/br_forward.c:115
br_flood+0x521/0x5c0 net/bridge/br_forward.c:242
br_dev_xmit+0x8b6/0x960
__netdev_start_xmit include/linux/netdevice.h:4683 [inline]
netdev_start_xmit include/linux/netdevice.h:4697 [inline]
xmit_one+0x105/0x2f0 net/core/dev.c:3473
dev_hard_start_xmit net/core/dev.c:3489 [inline]
__dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
neigh_hh_output include/net/neighbour.h:525 [inline]
neigh_output include/net/neighbour.h:539 [inline]
ip_finish_output2+0x6f8/0xb70 net/ipv4/ip_output.c:228
ip_finish_output+0xfb/0x240 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:451 [inline]
ip_local_out net/ipv4/ip_output.c:126 [inline]
ip_send_skb+0x6e/0xe0 net/ipv4/ip_output.c:1570
udp_send_skb+0x641/0x880 net/ipv4/udp.c:967
udp_sendmsg+0x12ea/0x14c0 net/ipv4/udp.c:1254
inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
__do_sys_sendmmsg net/socket.c:2582 [inline]
__se_sys_sendmmsg net/socket.c:2579 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x00 -> 0x01
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 23563 Comm: syz-executor.5 Not tainted
5.17.0-rc2-syzkaller-00064-gc36c04c2e132 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes:
948d4f214fde ("veth: Add driver XDP")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 9 Feb 2022 12:02:28 +0000 (12:02 +0000)]
Merge tag 'linux-can-fixes-for-5.17-
20220209' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2022-02-09
this is a pull request of 2 patches for net/master.
Oliver Hartkopp contributes 2 fixes for the CAN ISOTP protocol.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Duoming Zhou [Tue, 8 Feb 2022 15:40:00 +0000 (23:40 +0800)]
ax25: fix NPD bug in ax25_disconnect
The ax25_disconnect() in ax25_kill_by_device() is not
protected by any locks, thus there is a race condition
between ax25_disconnect() and ax25_destroy_socket().
when ax25->sk is assigned as NULL by ax25_destroy_socket(),
a NULL pointer dereference bug will occur if site (1) or (2)
dereferences ax25->sk.
ax25_kill_by_device() | ax25_release()
ax25_disconnect() | ax25_destroy_socket()
... |
if(ax25->sk != NULL) | ...
... | ax25->sk = NULL;
bh_lock_sock(ax25->sk); //(1) | ...
... |
bh_unlock_sock(ax25->sk); //(2)|
This patch moves ax25_disconnect() into lock_sock(), which can
synchronize with ax25_destroy_socket() in ax25_release().
Fail log:
===============================================================
BUG: kernel NULL pointer dereference, address:
0000000000000088
...
RIP: 0010:_raw_spin_lock+0x7e/0xd0
...
Call Trace:
ax25_disconnect+0xf6/0x220
ax25_device_event+0x187/0x250
raw_notifier_call_chain+0x5e/0x70
dev_close_many+0x17d/0x230
rollback_registered_many+0x1f1/0x950
unregister_netdevice_queue+0x133/0x200
unregister_netdev+0x13/0x20
...
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 9 Feb 2022 11:41:48 +0000 (11:41 +0000)]
Merge branch 'net-fix-skb-unclone-issues'
Antoine Tenart says:
====================
net: fix issues when uncloning an skb dst+metadata
This fixes two issues when uncloning an skb dst+metadata in
tun_dst_unclone; this was initially reported by Vlad Buslov[1]. Because
of the memory leak fixed by patch 2, the issue in patch 1 never happened
in practice.
tun_dst_unclone is called from two different places, one in geneve/vxlan
to handle PMTU and one in net/openvswitch/actions.c where it is used to
retrieve tunnel information. While both Vlad and I tested the former, we
could not for the latter. I did spend quite some time trying to, but
that code path is not easy to trigger. Code inspection shows this should
be fine, the tunnel information (dst+metadata) is uncloned and the skb
it is referenced from is only consumed after all accesses to the tunnel
information are done:
do_execute_actions
output_userspace
dev_fill_metadata_dst <- dst+metadata is uncloned
ovs_dp_upcall
queue_userspace_packet
ovs_nla_put_tunnel_info <- metadata (tunnel info) is accessed
consume_skb <- dst+metadata is freed
Thanks!
Antoine
[1] https://lore.kernel.org/all/ygnhh79yluw2.fsf@nvidia.com/T/#m2f814614a4f5424cea66bbff7297f692b59b69a0
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Mon, 7 Feb 2022 17:13:19 +0000 (18:13 +0100)]
net: fix a memleak when uncloning an skb dst and its metadata
When uncloning an skb dst and its associated metadata, a new
dst+metadata is allocated and later replaces the old one in the skb.
This is helpful to have a non-shared dst+metadata attached to a specific
skb.
The issue is the uncloned dst+metadata is initialized with a refcount of
1, which is increased to 2 before attaching it to the skb. When
tun_dst_unclone returns, the dst+metadata is only referenced from a
single place (the skb) while its refcount is 2. Its refcount will never
drop to 0 (when the skb is consumed), leading to a memory leak.
Fix this by removing the call to dst_hold in tun_dst_unclone, as the
dst+metadata refcount is already 1.
Fixes:
fc4099f17240 ("openvswitch: Fix egress tunnel info.")
Cc: Pravin B Shelar <pshelar@ovn.org>
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Mon, 7 Feb 2022 17:13:18 +0000 (18:13 +0100)]
net: do not keep the dst cache when uncloning an skb dst and its metadata
When uncloning an skb dst and its associated metadata a new dst+metadata
is allocated and the tunnel information from the old metadata is copied
over there.
The issue is the tunnel metadata has references to cached dst, which are
copied along the way. When a dst+metadata refcount drops to 0 the
metadata is freed including the cached dst entries. As they are also
referenced in the initial dst+metadata, this ends up in UaFs.
In practice the above did not happen because of another issue, the
dst+metadata was never freed because its refcount never dropped to 0
(this will be fixed in a subsequent patch).
Fix this by initializing the dst cache after copying the tunnel
information from the old metadata to also unshare the dst cache.
Fixes:
d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel")
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oliver Hartkopp [Wed, 9 Feb 2022 07:36:01 +0000 (08:36 +0100)]
can: isotp: fix error path in isotp_sendmsg() to unlock wait queue
Commit
43a08c3bdac4 ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent
access in isotp_sendmsg()") introduced a new locking scheme that may render
the userspace application in a locking state when an error is detected.
This issue shows up under high load on simultaneously running isotp channels
with identical configuration which is against the ISO specification and
therefore breaks any reasonable PDU communication anyway.
Fixes:
43a08c3bdac4 ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent access in isotp_sendmsg()")
Link: https://lore.kernel.org/all/20220209073601.25728-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Cc: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Tue, 8 Feb 2022 20:00:26 +0000 (21:00 +0100)]
can: isotp: fix potential CAN frame reception race in isotp_rcv()
When receiving a CAN frame the current code logic does not consider
concurrently receiving processes which do not show up in real world
usage.
Ziyang Xuan writes:
The following syz problem is one of the scenarios. so->rx.len is
changed by isotp_rcv_ff() during isotp_rcv_cf(), so->rx.len equals
0 before alloc_skb() and equals 4096 after alloc_skb(). That will
trigger skb_over_panic() in skb_put().
=======================================================
CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc8-syzkaller #0
RIP: 0010:skb_panic+0x16c/0x16e net/core/skbuff.c:113
Call Trace:
<TASK>
skb_over_panic net/core/skbuff.c:118 [inline]
skb_put.cold+0x24/0x24 net/core/skbuff.c:1990
isotp_rcv_cf net/can/isotp.c:570 [inline]
isotp_rcv+0xa38/0x1e30 net/can/isotp.c:668
deliver net/can/af_can.c:574 [inline]
can_rcv_filter+0x445/0x8d0 net/can/af_can.c:635
can_receive+0x31d/0x580 net/can/af_can.c:665
can_rcv+0x120/0x1c0 net/can/af_can.c:696
__netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5465
__netif_receive_skb+0x24/0x1b0 net/core/dev.c:5579
Therefore we make sure the state changes and data structures stay
consistent at CAN frame reception time by adding a spin_lock in
isotp_rcv(). This fixes the issue reported by syzkaller but does not
affect real world operation.
Fixes:
e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/linux-can/d7e69278-d741-c706-65e1-e87623d9a8e8@huawei.com/T/
Link: https://lore.kernel.org/all/20220208200026.13783-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Reported-by: syzbot+4c63f36709a642f801c5@syzkaller.appspotmail.com
Reported-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Louis Peens [Tue, 8 Feb 2022 10:14:53 +0000 (11:14 +0100)]
nfp: flower: fix ida_idx not being released
When looking for a global mac index the extra NFP_TUN_PRE_TUN_IDX_BIT
that gets set if nfp_flower_is_supported_bridge is true is not taken
into account. Consequently the path that should release the ida_index
in cleanup is never triggered, causing messages like:
nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.
nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.
nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.
after NFP_MAX_MAC_INDEX number of reconfigs. Ultimately this lead to
new tunnel flows not being offloaded.
Fix this by unsetting the NFP_TUN_PRE_TUN_IDX_BIT before checking if
the port is of type OTHER.
Fixes:
2e0bc7f3cb55 ("nfp: flower: encode mac indexes with pre-tunnel rule check")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220208101453.321949-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Tue, 8 Feb 2022 05:34:51 +0000 (21:34 -0800)]
ipmr,ip6mr: acquire RTNL before calling ip[6]mr_free_table() on failure path
ip[6]mr_free_table() can only be called under RTNL lock.
RTNL: assertion failed at net/core/dev.c (10367)
WARNING: CPU: 1 PID: 5890 at net/core/dev.c:10367 unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367
Modules linked in:
CPU: 1 PID: 5890 Comm: syz-executor.2 Not tainted
5.16.0-syzkaller-11627-g422ee58dc0ef #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367
Code: 0f 85 9b ee ff ff e8 69 07 4b fa ba 7f 28 00 00 48 c7 c6 00 90 ae 8a 48 c7 c7 40 90 ae 8a c6 05 6d b1 51 06 01 e8 8c 90 d8 01 <0f> 0b e9 70 ee ff ff e8 3e 07 4b fa 4c 89 e7 e8 86 2a 59 fa e9 ee
RSP: 0018:
ffffc900046ff6e0 EFLAGS:
00010286
RAX:
0000000000000000 RBX:
0000000000000000 RCX:
0000000000000000
RDX:
ffff888050f51d00 RSI:
ffffffff815fa008 RDI:
fffff520008dfece
RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000000
R10:
ffffffff815f3d6e R11:
0000000000000000 R12:
00000000fffffff4
R13:
dffffc0000000000 R14:
ffffc900046ff750 R15:
ffff88807b7dc000
FS:
00007f4ab736e700(0000) GS:
ffff8880b9d00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fee0b4f8990 CR3:
000000001e7d2000 CR4:
00000000003506e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
mroute_clean_tables+0x244/0xb40 net/ipv6/ip6mr.c:1509
ip6mr_free_table net/ipv6/ip6mr.c:389 [inline]
ip6mr_rules_init net/ipv6/ip6mr.c:246 [inline]
ip6mr_net_init net/ipv6/ip6mr.c:1306 [inline]
ip6mr_net_init+0x3f0/0x4e0 net/ipv6/ip6mr.c:1298
ops_init+0xaf/0x470 net/core/net_namespace.c:140
setup_net+0x54f/0xbb0 net/core/net_namespace.c:331
copy_net_ns+0x318/0x760 net/core/net_namespace.c:475
create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110
copy_namespaces+0x391/0x450 kernel/nsproxy.c:178
copy_process+0x2e0c/0x7300 kernel/fork.c:2167
kernel_clone+0xe7/0xab0 kernel/fork.c:2555
__do_sys_clone+0xc8/0x110 kernel/fork.c:2672
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f4ab89f9059
Code: Unable to access opcode bytes at RIP 0x7f4ab89f902f.
RSP: 002b:
00007f4ab736e118 EFLAGS:
00000206 ORIG_RAX:
0000000000000038
RAX:
ffffffffffffffda RBX:
00007f4ab8b0bf60 RCX:
00007f4ab89f9059
RDX:
0000000020000280 RSI:
0000000020000270 RDI:
0000000040200000
RBP:
00007f4ab8a5308d R08:
0000000020000300 R09:
0000000020000300
R10:
00000000200002c0 R11:
0000000000000206 R12:
0000000000000000
R13:
00007ffc3977cc1f R14:
00007f4ab736e300 R15:
0000000000022000
</TASK>
Fixes:
f243e5a7859a ("ipmr,ip6mr: call ip6mr_free_table() on failure path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <cong.wang@bytedance.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220208053451.2885398-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cai Huoqing [Tue, 8 Feb 2022 01:33:08 +0000 (09:33 +0800)]
net: ethernet: litex: Add the dependency on HAS_IOMEM
The LiteX driver uses devm io function API which
needs HAS_IOMEM enabled, so add the dependency on HAS_IOMEM.
Fixes:
ee7da21ac4c3 ("net: Add driver for LiteX's LiteETH network interface")
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Link: https://lore.kernel.org/r/20220208013308.6563-1-cai.huoqing@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sukadev Bhattiprolu [Tue, 8 Feb 2022 00:19:18 +0000 (16:19 -0800)]
ibmvnic: don't release napi in __ibmvnic_open()
If __ibmvnic_open() encounters an error such as when setting link state,
it calls release_resources() which frees the napi structures needlessly.
Instead, have __ibmvnic_open() only clean up the work it did so far (i.e.
disable napi and irqs) and leave the rest to the callers.
If caller of __ibmvnic_open() is ibmvnic_open(), it should release the
resources immediately. If the caller is do_reset() or do_hard_reset(),
they will release the resources on the next reset.
This fixes following crash that occurred when running the drmgr command
several times to add/remove a vnic interface:
[102056] ibmvnic
30000003 env3: Disabling rx_scrq[6] irq
[102056] ibmvnic
30000003 env3: Disabling rx_scrq[7] irq
[102056] ibmvnic
30000003 env3: Replenished 8 pools
Kernel attempted to read user page (10) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000010
Faulting instruction address: 0xc000000000a3c840
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
...
CPU: 9 PID: 102056 Comm: kworker/9:2 Kdump: loaded Not tainted
5.16.0-rc5-autotest-g6441998e2e37 #1
Workqueue: events_long __ibmvnic_reset [ibmvnic]
NIP:
c000000000a3c840 LR:
c0080000029b5378 CTR:
c000000000a3c820
REGS:
c0000000548e37e0 TRAP: 0300 Not tainted (
5.16.0-rc5-autotest-g6441998e2e37)
MSR:
8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR:
28248484 XER:
00000004
CFAR:
c0080000029bdd24 DAR:
0000000000000010 DSISR:
40000000 IRQMASK: 0
GPR00:
c0080000029b55d0 c0000000548e3a80 c0000000028f0200 0000000000000000
...
NIP [
c000000000a3c840] napi_enable+0x20/0xc0
LR [
c0080000029b5378] __ibmvnic_open+0xf0/0x430 [ibmvnic]
Call Trace:
[
c0000000548e3a80] [
0000000000000006] 0x6 (unreliable)
[
c0000000548e3ab0] [
c0080000029b55d0] __ibmvnic_open+0x348/0x430 [ibmvnic]
[
c0000000548e3b40] [
c0080000029bcc28] __ibmvnic_reset+0x500/0xdf0 [ibmvnic]
[
c0000000548e3c60] [
c000000000176228] process_one_work+0x288/0x570
[
c0000000548e3d00] [
c000000000176588] worker_thread+0x78/0x660
[
c0000000548e3da0] [
c0000000001822f0] kthread+0x1c0/0x1d0
[
c0000000548e3e10] [
c00000000000cf64] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
7d2948f8 792307e0 4e800020 60000000 3c4c01eb 384239e0 f821ffd1 39430010
38a0fff6 e92d1100 f9210028 39200000 <
e9030010>
f9010020 60420000 e9210020
---[ end trace
5f8033b08fd27706 ]---
Fixes:
ed651a10875f ("ibmvnic: Updated reset handling")
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Link: https://lore.kernel.org/r/20220208001918.900602-1-sukadev@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 9 Feb 2022 04:30:38 +0000 (20:30 -0800)]
Merge branch 'more-dsa-fixes-for-devres-mdiobus_-alloc-register'
Vladimir Oltean says:
====================
More DSA fixes for devres + mdiobus_{alloc,register}
The initial patch series "[net,0/2] Fix mdiobus users with devres"
https://patchwork.kernel.org/project/netdevbpf/cover/
20210920214209.
1733768-1-vladimir.oltean@nxp.com/
fixed some instances where DSA drivers on slow buses (SPI, I2C) trigger
a panic (changed since then to a warn) in mdiobus_free. That was due to
devres calling mdiobus_free() with no prior mdiobus_unregister(), which
again was due to commit
ac3a68d56651 ("net: phy: don't abuse devres in
devm_mdiobus_register()") by Bartosz Golaszewski.
Rafael Richter and Daniel Klauer report yet another variation on that
theme, but this time it applies to any DSA switch driver, not just those
on buses which have a "->shutdown() calls ->remove() which unregisters
children" sequence.
Their setup is that of an LX2160A DPAA2 SoC driving a Marvell DSA switch
(MDIO). DPAA2 Ethernet drivers probe on the "fsl-mc" bus
(drivers/bus/fsl-mc/fsl-mc-bus.c). This bus is meant to be the
kernel-side representation of the networking objects kept by the
Management Complex (MC) firmware.
The fsl-mc bus driver has this pattern:
static void fsl_mc_bus_shutdown(struct platform_device *pdev)
{
fsl_mc_bus_remove(pdev);
}
which proceeds to remove the children on the bus. Among those children,
the dpaa2-eth network driver.
When dpaa2-eth is a DSA master, this removal of the master on shutdown
trips up the device link created by dsa_master_setup(), and as such, the
Marvell switch is also removed.
From this point on, readers can revisit the description of commits
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
since the prerequisites for the BUG_ON in mdiobus_free() have been
accomplished if there is a devres mismatch between mdiobus_alloc() and
mdiobus_register().
Most DSA drivers have this kind of mismatch, and upon my initial
assessment I had not realized the possibility described above, so I
didn't fix it. This patch series walks through all drivers and makes
them use either fully devres, or no devres.
I am aware that there are DSA drivers that are only known to be tested
with a single DSA master, so some patches are probably overkill for
them. But code is copy-pasted from so many sources without fully
understanding the differences, that I think it's better to not leave an
in-tree source of inspiration that may lead to subtle breakage if not
adapted properly.
====================
Link: https://lore.kernel.org/r/20220207161553.579933-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 7 Feb 2022 16:15:53 +0000 (18:15 +0200)]
net: dsa: lantiq_gswip: don't use devres for mdiobus
As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The GSWIP switch is a platform device, so the initial set of constraints
that I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the GSWIP switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The gswip driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.
Fixes:
ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 7 Feb 2022 16:15:52 +0000 (18:15 +0200)]
net: dsa: mt7530: fix kernel bug in mdiobus_free() when unbinding
Nobody in this driver calls mdiobus_unregister(), which is necessary if
mdiobus_register() completes successfully. So if the devres callbacks
that free the mdiobus get invoked (this is the case when unbinding the
driver), mdiobus_free() will BUG if the mdiobus is still registered,
which it is.
My speculation is that this is due to the fact that prior to commit
ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
from June 2020, _devm_mdiobus_free() used to call mdiobus_unregister().
But at the time that the mt7530 support was introduced in May 2021, the
API was already changed. It's therefore likely that the blamed patch was
developed on an older tree, and incorrectly adapted to net-next. This
makes the Fixes: tag correct.
Fix the problem by using the devres variant of mdiobus_register.
Fixes:
ba751e28d442 ("net: dsa: mt7530: add interrupt support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 7 Feb 2022 16:15:51 +0000 (18:15 +0200)]
net: dsa: seville: register the mdiobus under devres
As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The Seville VSC9959 switch is a platform device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the seville switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The seville driver has a code structure that could accommodate both the
mdiobus_unregister and mdiobus_free calls, but it has an external
dependency upon mscc_miim_setup() from mdio-mscc-miim.c, which calls
devm_mdiobus_alloc_size() on its behalf. So rather than restructuring
that, and exporting yet one more symbol mscc_miim_teardown(), let's work
with devres and replace of_mdiobus_register with the devres variant.
When we use all-devres, we can ensure that devres doesn't free a
still-registered bus (it either runs both callbacks, or none).
Fixes:
ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 7 Feb 2022 16:15:50 +0000 (18:15 +0200)]
net: dsa: felix: don't use devres for mdiobus
As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The Felix VSC9959 switch is a PCI device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the felix switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The felix driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc_size() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.
Fixes:
ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 7 Feb 2022 16:15:49 +0000 (18:15 +0200)]
net: dsa: bcm_sf2: don't use devres for mdiobus
As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The Starfighter 2 is a platform device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the bcm_sf2 switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The bcm_sf2 driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.
Fixes:
ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 7 Feb 2022 16:15:48 +0000 (18:15 +0200)]
net: dsa: ar9331: register the mdiobus under devres
As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The ar9331 is an MDIO device, so the initial set of constraints that I
thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the ar9331 switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The ar9331 driver doesn't have a complex code structure for mdiobus
removal, so just replace of_mdiobus_register with the devres variant in
order to be all-devres and ensure that we don't free a still-registered
bus.
Fixes:
ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 7 Feb 2022 16:15:47 +0000 (18:15 +0200)]
net: dsa: mv88e6xxx: don't use devres for mdiobus
As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The mv88e6xxx is an MDIO device, so the initial set of constraints that
I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the Marvell switch driver on shutdown.
systemd-shutdown[1]: Powering off.
mv88e6085 0x0000000008b96000:00 sw_gl0: Link is Down
fsl-mc dpbp.9: Removing from iommu group 7
fsl-mc dpbp.8: Removing from iommu group 7
------------[ cut here ]------------
kernel BUG at drivers/net/phy/mdio_bus.c:677!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted
5.16.5-00040-gdc05f73788e5 #15
pc : mdiobus_free+0x44/0x50
lr : devm_mdiobus_free+0x10/0x20
Call trace:
mdiobus_free+0x44/0x50
devm_mdiobus_free+0x10/0x20
devres_release_all+0xa0/0x100
__device_release_driver+0x190/0x220
device_release_driver_internal+0xac/0xb0
device_links_unbind_consumers+0xd4/0x100
__device_release_driver+0x4c/0x220
device_release_driver_internal+0xac/0xb0
device_links_unbind_consumers+0xd4/0x100
__device_release_driver+0x94/0x220
device_release_driver+0x28/0x40
bus_remove_device+0x118/0x124
device_del+0x174/0x420
fsl_mc_device_remove+0x24/0x40
__fsl_mc_device_remove+0xc/0x20
device_for_each_child+0x58/0xa0
dprc_remove+0x90/0xb0
fsl_mc_driver_remove+0x20/0x5c
__device_release_driver+0x21c/0x220
device_release_driver+0x28/0x40
bus_remove_device+0x118/0x124
device_del+0x174/0x420
fsl_mc_bus_remove+0x80/0x100
fsl_mc_bus_shutdown+0xc/0x1c
platform_shutdown+0x20/0x30
device_shutdown+0x154/0x330
kernel_power_off+0x34/0x6c
__do_sys_reboot+0x15c/0x250
__arm64_sys_reboot+0x20/0x30
invoke_syscall.constprop.0+0x4c/0xe0
do_el0_svc+0x4c/0x150
el0_svc+0x24/0xb0
el0t_64_sync_handler+0xa8/0xb0
el0t_64_sync+0x178/0x17c
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The Marvell driver already has a good structure for mdiobus removal, so
just plug in mdiobus_free and get rid of devres.
Fixes:
ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Reported-by: Rafael Richter <Rafael.Richter@gin.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Daniel Klauer <daniel.klauer@gin.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mahesh Bandewar [Mon, 7 Feb 2022 22:29:01 +0000 (14:29 -0800)]
bonding: pair enable_port with slave_arr_updates
When 803.2ad mode enables a participating port, it should update
the slave-array. I have observed that the member links are participating
and are part of the active aggregator while the traffic is egressing via
only one member link (in a case where two links are participating). Via
kprobes I discovered that slave-arr has only one link added while
the other participating link wasn't part of the slave-arr.
I couldn't see what caused that situation but the simple code-walk
through provided me hints that the enable_port wasn't always associated
with the slave-array update.
Fixes:
ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20220207222901.1795287-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tao Liu [Mon, 7 Feb 2022 17:59:01 +0000 (09:59 -0800)]
gve: Recording rx queue before sending to napi
This caused a significant performance degredation when using generic XDP
with multiple queues.
Fixes:
f5cedc84a30d2 ("gve: Add transmit and receive support")
Signed-off-by: Tao Liu <xliutaox@google.com>
Link: https://lore.kernel.org/r/20220207175901.2486596-1-jeroendb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavel Parkhomenko [Sat, 5 Feb 2022 20:39:32 +0000 (23:39 +0300)]
net: phy: marvell: Fix RGMII Tx/Rx delays setting in
88e1121-compatible PHYs
It is mandatory for a software to issue a reset upon modifying RGMII
Receive Timing Control and RGMII Transmit Timing Control bit fields of MAC
Specific Control register 2 (page 2, register 21) otherwise the changes
won't be perceived by the PHY (the same is applicable for a lot of other
registers). Not setting the RGMII delays on the platforms that imply it'
being done on the PHY side will consequently cause the traffic loss. We
discovered that the denoted soft-reset is missing in the
m88e1121_config_aneg() method for the case if the RGMII delays are
modified but the MDIx polarity isn't changed or the auto-negotiation is
left enabled, thus causing the traffic loss on our platform with Marvell
Alaska
88E1510 installed. Let's fix that by issuing the soft-reset if the
delays have been actually set in the m88e1121_config_aneg_rgmii_delays()
method.
Cc: stable@vger.kernel.org
Fixes:
d6ab93364734 ("net: phy: marvell: Avoid unnecessary soft reset")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20220205203932.26899-1-Pavel.Parkhomenko@baikalelectronics.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 6 Feb 2022 14:33:48 +0000 (06:33 -0800)]
net/smc: use GFP_ATOMIC allocation in smc_pnet_add_eth()
My last patch moved the netdev_tracker_alloc() call to a section
protected by a write_lock().
I should have replaced GFP_KERNEL with GFP_ATOMIC to avoid the infamous:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:256
Fixes:
28f922213886 ("net/smc: fix ref_tracker issue in smc_pnet_add()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sun, 6 Feb 2022 05:05:16 +0000 (21:05 -0800)]
net/smc: fix ref_tracker issue in smc_pnet_add()
I added the netdev_tracker_alloc() right after ndev was
stored into the newly allocated object:
new_pe->ndev = ndev;
if (ndev)
netdev_tracker_alloc(ndev, &new_pe->dev_tracker, GFP_KERNEL);
But I missed that later, we could end up freeing new_pe,
then calling dev_put(ndev) to release the reference on ndev.
The new_pe->dev_tracker would not be freed.
To solve this issue, move the netdev_tracker_alloc() call to
the point we know for sure new_pe will be kept.
syzbot report (on net-next tree, but the bug is present in net tree)
WARNING: CPU: 0 PID: 6019 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 6019 Comm: syz-executor.3 Not tainted
5.17.0-rc2-syzkaller-00650-g5a8fb33e5305 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d f4 70 a0 09 31 ff 89 de e8 4d bc 99 fd 84 db 75 e0 e8 64 b8 99 fd 48 c7 c7 20 0c 06 8a c6 05 d4 70 a0 09 01 e8 9e 4e 28 05 <0f> 0b eb c4 e8 48 b8 99 fd 0f b6 1d c3 70 a0 09 31 ff 89 de e8 18
RSP: 0018:
ffffc900043b7400 EFLAGS:
00010282
RAX:
0000000000000000 RBX:
0000000000000000 RCX:
0000000000000000
RDX:
0000000000040000 RSI:
ffffffff815fb318 RDI:
fffff52000876e72
RBP:
0000000000000004 R08:
0000000000000000 R09:
0000000000000000
R10:
ffffffff815f507e R11:
0000000000000000 R12:
1ffff92000876e85
R13:
0000000000000000 R14:
ffff88805c1c6600 R15:
0000000000000000
FS:
00007f1ef6feb700(0000) GS:
ffff8880b9c00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000001b2d02b000 CR3:
00000000223f4000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
ref_tracker_free+0x53f/0x6c0 lib/ref_tracker.c:119
netdev_tracker_free include/linux/netdevice.h:3867 [inline]
dev_put_track include/linux/netdevice.h:3884 [inline]
dev_put_track include/linux/netdevice.h:3880 [inline]
dev_put include/linux/netdevice.h:3910 [inline]
smc_pnet_add_eth net/smc/smc_pnet.c:399 [inline]
smc_pnet_enter net/smc/smc_pnet.c:493 [inline]
smc_pnet_add+0x5fc/0x15f0 net/smc/smc_pnet.c:556
genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:731
genl_family_rcv_msg net/netlink/genetlink.c:775 [inline]
genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:792
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
genl_rcv+0x24/0x40 net/netlink/genetlink.c:803
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:725
____sys_sendmsg+0x6e8/0x810 net/socket.c:2413
___sys_sendmsg+0xf3/0x170 net/socket.c:2467
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes:
b60645248af3 ("net/smc: add net device tracker to struct smc_pnetentry")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Parkhomenko [Sat, 5 Feb 2022 21:49:51 +0000 (00:49 +0300)]
net: phy: marvell: Fix MDI-x polarity setting in
88e1118-compatible PHYs
When setting up autonegotiation for 88E1118R and compatible PHYs,
a software reset of PHY is issued before setting up polarity.
This is incorrect as changes of MDI Crossover Mode bits are
disruptive to the normal operation and must be followed by a
software reset to take effect. Let's patch m88e1118_config_aneg()
to fix the issue mentioned before by invoking software reset
of the PHY just after setting up MDI-x polarity.
Fixes:
605f196efbf8 ("phy: Add support for Marvell
88E1118 PHY")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 4 Feb 2022 23:03:21 +0000 (01:03 +0200)]
net: mscc: ocelot: fix all IP traffic getting trapped to CPU with PTP over IP
The filters for the PTP trap keys are incorrectly configured, in the
sense that is2_entry_set() only looks at trap->key.ipv4.dport or
trap->key.ipv6.dport if trap->key.ipv4.proto or trap->key.ipv6.proto is
set to IPPROTO_TCP or IPPROTO_UDP.
But we don't do that, so is2_entry_set() goes through the "else" branch
of the IP protocol check, and ends up installing a rule for "Any IP
protocol match" (because msk is also 0). The UDP port is ignored.
This means that when we run "ptp4l -i swp0 -4", all IP traffic is
trapped to the CPU, which hinders bridging.
Fix this by specifying the IP protocol in the VCAP IS2 filters for PTP
over UDP.
Fixes:
96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 3 Feb 2022 22:55:47 +0000 (14:55 -0800)]
tcp: take care of mixed splice()/sendmsg(MSG_ZEROCOPY) case
syzbot found that mixing sendpage() and sendmsg(MSG_ZEROCOPY)
calls over the same TCP socket would again trigger the
infamous warning in inet_sock_destruct()
WARN_ON(sk_forward_alloc_get(sk));
While Talal took into account a mix of regular copied data
and MSG_ZEROCOPY one in the same skb, the sendpage() path
has been forgotten.
We want the charging to happen for sendpage(), because
pages could be coming from a pipe. What is missing is the
downgrading of pure zerocopy status to make sure
sk_forward_alloc will stay synced.
Add tcp_downgrade_zcopy_pure() helper so that we can
use it from the two callers.
Fixes:
9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Talal Ahmad <talalahmad@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20220203225547.665114-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 4 Feb 2022 16:47:41 +0000 (08:47 -0800)]
Merge git://git./linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Don't refresh timeout for SCTP flows in CLOSED state.
2) Don't allow access to transport header if fragment offset is set on.
3) Reinitialize internal conntrack state for retransmitted TCP
syn-ack packet.
4) Update MAINTAINER file to add the Netfilter group tree. Moving
forward, Florian Westphal has access to this tree so he can also
send pull requests.
5) Set on IPS_HELPER for entries created via ctnetlink, otherwise NAT
might zap it.
All patches from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ctnetlink: disable helper autoassign
MAINTAINERS: netfilter: update git links
netfilter: conntrack: re-init state for retransmitted syn-ack
netfilter: conntrack: move synack init code to helper
netfilter: nft_payload: don't allow th access for fragments
netfilter: conntrack: don't refresh sctp entries in closed state
====================
Link: https://lore.kernel.org/r/20220204151903.320786-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Samuel Mendoza-Jonas [Thu, 3 Feb 2022 22:49:16 +0000 (14:49 -0800)]
ixgbevf: Require large buffers for build_skb on 82599VF
From 4.17 onwards the ixgbevf driver uses build_skb() to build an skb
around new data in the page buffer shared with the ixgbe PF.
This uses either a 2K or 3K buffer, and offsets the DMA mapping by
NET_SKB_PAD + NET_IP_ALIGN. When using a smaller buffer RXDCTL is set to
ensure the PF does not write a full 2K bytes into the buffer, which is
actually 2K minus the offset.
However on the 82599 virtual function, the RXDCTL mechanism is not
available. The driver attempts to work around this by using the SET_LPE
mailbox method to lower the maximm frame size, but the ixgbe PF driver
ignores this in order to keep the PF and all VFs in sync[0].
This means the PF will write up to the full 2K set in SRRCTL, causing it
to write NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the buffer.
With 4K pages split into two buffers, this means it either writes
NET_SKB_PAD + NET_IP_ALIGN bytes past the first buffer (and into the
second), or NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the DMA
mapping.
Avoid this by only enabling build_skb when using "large" buffers (3K).
These are placed in each half of an order-1 page, preventing the PF from
writing past the end of the mapping.
[0]: Technically it only ever raises the max frame size, see
ixgbe_set_vf_lpe() in ixgbe_sriov.c
Fixes:
f15c5ba5b6cd ("ixgbevf: add support for using order 1 pages to receive large frames")
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Wed, 2 Feb 2022 11:00:56 +0000 (12:00 +0100)]
netfilter: ctnetlink: disable helper autoassign
When userspace, e.g. conntrackd, inserts an entry with a specified helper,
its possible that the helper is lost immediately after its added:
ctnetlink_create_conntrack
-> nf_ct_helper_ext_add + assign helper
-> ctnetlink_setup_nat
-> ctnetlink_parse_nat_setup
-> parse_nat_setup -> nfnetlink_parse_nat_setup
-> nf_nat_setup_info
-> nf_conntrack_alter_reply
-> __nf_ct_try_assign_helper
... and __nf_ct_try_assign_helper will zero the helper again.
Set IPS_HELPER bit to bypass auto-assign logic, its unwanted, just like
when helper is assigned via ruleset.
Dropped old 'not strictly necessary' comment, it referred to use of
rcu_assign_pointer() before it got replaced by RCU_INIT_POINTER().
NB: Fixes tag intentionally incorrect, this extends the referenced commit,
but this change won't build without IPS_HELPER introduced there.
Fixes:
6714cf5465d280 ("netfilter: nf_conntrack: fix explicit helper attachment and NAT")
Reported-by: Pham Thanh Tuyen <phamtyn@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Sat, 29 Jan 2022 17:30:18 +0000 (18:30 +0100)]
MAINTAINERS: netfilter: update git links
nf and nf-next have a new location.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Sat, 29 Jan 2022 16:47:01 +0000 (17:47 +0100)]
netfilter: conntrack: re-init state for retransmitted syn-ack
TCP conntrack assumes that a syn-ack retransmit is identical to the
previous syn-ack. This isn't correct and causes stuck 3whs in some more
esoteric scenarios. tcpdump to illustrate the problem:
client > server: Flags [S] seq
1365731894, win 29200, [mss 1460,sackOK,TS val
2083035583 ecr 0,wscale 7]
server > client: Flags [S.] seq
145824453, ack
643160523, win 65535, [mss 8952,wscale 5,TS val
3215367629 ecr
2082921663]
Note the invalid/outdated synack ack number.
Conntrack marks this syn-ack as out-of-window/invalid, but it did
initialize the reply direction parameters based on this packets content.
client > server: Flags [S] seq
1365731894, win 29200, [mss 1460,sackOK,TS val
2083036623 ecr 0,wscale 7]
... retransmit...
server > client: Flags [S.], seq
145824453, ack
643160523, win 65535, [mss 8952,wscale 5,TS val
3215368644 ecr
2082921663]
and another bogus synack. This repeats, then client re-uses for a new
attempt:
client > server: Flags [S], seq
2375731741, win 29200, [mss 1460,sackOK,TS val
2083100223 ecr 0,wscale 7]
server > client: Flags [S.], seq
145824453, ack
643160523, win 65535, [mss 8952,wscale 5,TS val
3215430754 ecr
2082921663]
... but still gets a invalid syn-ack.
This repeats until:
server > client: Flags [S.], seq
145824453, ack
643160523, win 65535, [mss 8952,wscale 5,TS val
3215437785 ecr
2082921663]
server > client: Flags [R.], seq
145824454, ack
643160523, win 65535, [mss 8952,wscale 5,TS val
3215443451 ecr
2082921663]
client > server: Flags [S], seq
2375731741, win 29200, [mss 1460,sackOK,TS val
2083115583 ecr 0,wscale 7]
server > client: Flags [S.], seq
162602410, ack
2375731742, win 65535, [mss 8952,wscale 5,TS val
3215445754 ecr
2083115583]
This syn-ack has the correct ack number, but conntrack flags it as
invalid: The internal state was created from the first syn-ack seen
so the sequence number of the syn-ack is treated as being outside of
the announced window.
Don't assume that retransmitted syn-ack is identical to previous one.
Treat it like the first syn-ack and reinit state.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Sat, 29 Jan 2022 16:47:00 +0000 (17:47 +0100)]
netfilter: conntrack: move synack init code to helper
It seems more readable to use a common helper in the followup fix rather
than copypaste or goto.
No functional change intended. The function is only called for syn-ack
or syn in repy direction in case of simultaneous open.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Sat, 29 Jan 2022 16:13:23 +0000 (17:13 +0100)]
netfilter: nft_payload: don't allow th access for fragments
Loads relative to ->thoff naturally expect that this points to the
transport header, but this is only true if pkt->fragoff == 0.
This has little effect for rulesets with connection tracking/nat because
these enable ip defra. For other rulesets this prevents false matches.
Fixes:
96518518cc41 ("netfilter: add nftables")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Fri, 28 Jan 2022 12:13:32 +0000 (13:13 +0100)]
netfilter: conntrack: don't refresh sctp entries in closed state
Vivek Thrivikraman reported:
An SCTP server application which is accessed continuously by client
application.
When the session disconnects the client retries to establish a connection.
After restart of SCTP server application the session is not established
because of stale conntrack entry with connection state CLOSED as below.
(removing this entry manually established new connection):
sctp 9 CLOSED src=10.141.189.233 [..] [ASSURED]
Just skip timeout update of closed entries, we don't want them to
stay around forever.
Reported-and-tested-by: Vivek Thrivikraman <vivek.thrivikraman@est.tech>
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1579
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Steen Hegelund [Thu, 3 Feb 2022 10:29:00 +0000 (11:29 +0100)]
net: sparx5: Fix get_stat64 crash in tcpdump
This problem was found with Sparx5 when the tcpdump tool requests the
do_get_stats64 (sparx5_get_stats64) statistic.
The portstats pointer was incorrectly incremented when fetching priority
based statistics.
Fixes:
af4b11022e2d (net: sparx5: add ethtool configuration and statistics support)
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220203102900.528987-1-steen.hegelund@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kees Cook [Thu, 3 Feb 2022 20:17:54 +0000 (12:17 -0800)]
gcc-plugins/stackleak: Use noinstr in favor of notrace
While the stackleak plugin was already using notrace, objtool is now a
bit more picky. Update the notrace uses to noinstr. Silences the
following objtool warnings when building with:
CONFIG_DEBUG_ENTRY=y
CONFIG_STACK_VALIDATION=y
CONFIG_VMLINUX_VALIDATION=y
CONFIG_GCC_PLUGIN_STACKLEAK=y
vmlinux.o: warning: objtool: do_syscall_64()+0x9: call to stackleak_track_stack() leaves .noinstr.text section
vmlinux.o: warning: objtool: do_int80_syscall_32()+0x9: call to stackleak_track_stack() leaves .noinstr.text section
vmlinux.o: warning: objtool: exc_general_protection()+0x22: call to stackleak_track_stack() leaves .noinstr.text section
vmlinux.o: warning: objtool: fixup_bad_iret()+0x20: call to stackleak_track_stack() leaves .noinstr.text section
vmlinux.o: warning: objtool: do_machine_check()+0x27: call to stackleak_track_stack() leaves .noinstr.text section
vmlinux.o: warning: objtool: .text+0x5346e: call to stackleak_erase() leaves .noinstr.text section
vmlinux.o: warning: objtool: .entry.text+0x143: call to stackleak_erase() leaves .noinstr.text section
vmlinux.o: warning: objtool: .entry.text+0x10eb: call to stackleak_erase() leaves .noinstr.text section
vmlinux.o: warning: objtool: .entry.text+0x17f9: call to stackleak_erase() leaves .noinstr.text section
Note that the plugin's addition of calls to stackleak_track_stack() from
noinstr functions is expected to be safe, as it isn't runtime
instrumentation and is self-contained.
Cc: Alexander Popov <alex.popov@linux.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 4 Feb 2022 00:54:18 +0000 (16:54 -0800)]
Merge tag 'net-5.17-rc3' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, netfilter, and ieee802154.
Current release - regressions:
- Partially revert "net/smc: Add netlink net namespace support", fix
uABI breakage
- netfilter:
- nft_ct: fix use after free when attaching zone template
- nft_byteorder: track register operations
Previous releases - regressions:
- ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback
- phy: qca8081: fix speeds lower than 2.5Gb/s
- sched: fix use-after-free in tc_new_tfilter()
Previous releases - always broken:
- tcp: fix mem under-charging with zerocopy sendmsg()
- tcp: add missing tcp_skb_can_collapse() test in
tcp_shift_skb_data()
- neigh: do not trigger immediate probes on NUD_FAILED from
neigh_managed_work, avoid a deadlock
- bpf: use VM_MAP instead of VM_ALLOC for ringbuf, avoid KASAN
false-positives
- netfilter: nft_reject_bridge: fix for missing reply from prerouting
- smc: forward wakeup to smc socket waitqueue after fallback
- ieee802154:
- return meaningful error codes from the netlink helpers
- mcr20a: fix lifs/sifs periods
- at86rf230, ca8210: stop leaking skbs on error paths
- macsec: add missing un-offload call for NETDEV_UNREGISTER of parent
- ax25: add refcount in ax25_dev to avoid UAF bugs
- eth: mlx5e:
- fix SFP module EEPROM query
- fix broken SKB allocation in HW-GRO
- IPsec offload: fix tunnel mode crypto for non-TCP/UDP flows
- eth: amd-xgbe:
- fix skb data length underflow
- ensure reset of the tx_timer_active flag, avoid Tx timeouts
- eth: stmmac: fix runtime pm use in stmmac_dvr_remove()
- eth: e1000e: handshake with CSME starts from Alder Lake platforms"
* tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
ax25: fix reference count leaks of ax25_dev
net: stmmac: ensure PTP time register reads are consistent
net: ipa: request IPA register values be retained
dt-bindings: net: qcom,ipa: add optional qcom,qmp property
tools/resolve_btfids: Do not print any commands when building silently
bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work
tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()
net: sparx5: do not refer to skb after passing it on
Partially revert "net/smc: Add netlink net namespace support"
net/mlx5e: Avoid field-overflowing memcpy()
net/mlx5e: Use struct_group() for memcpy() region
net/mlx5e: Avoid implicit modify hdr for decap drop rule
net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic
net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic
net/mlx5e: Don't treat small ceil values as unlimited in HTB offload
net/mlx5: E-Switch, Fix uninitialized variable modact
net/mlx5e: Fix handling of wrong devices during bond netevent
net/mlx5e: Fix broken SKB allocation in HW-GRO
net/mlx5e: Fix wrong calculation of header index in HW_GRO
...
Linus Torvalds [Fri, 4 Feb 2022 00:44:12 +0000 (16:44 -0800)]
Merge tag 'selinux-pr-
20220203' of git://git./linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"One small SELinux patch to ensure that a policy structure field is
properly reset after freeing so that we don't inadvertently do a
double-free on certain error conditions"
* tag 'selinux-pr-
20220203' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix double free of cond_list on error paths
Linus Torvalds [Fri, 4 Feb 2022 00:36:26 +0000 (16:36 -0800)]
Merge tag 'linux-kselftest-fixes-5.17-rc3' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Important fixes to several tests and documentation clarification on
running mainline kselftest on stable releases. A few notable fixes:
- fix kselftest run hang due to child processes that haven't been
terminated. Fix signals all child processes
- fix false pass/fail results from vdso_test_abi, openat2, mincore
- build failures when using -j (multiple jobs) option
- exec test build failure due to incorrect build rule for a run-time
created "pipe"
- zram test fixes related to interaction with zram-generator to make
sure zram test to coordinate deleted with zram-generator
- zram test compression ratio calculation fix and skipping
max_comp_streams.
- increasing rtc test timeout
- cpufreq test to write test results to stdout which will necessary
on automated test systems"
* tag 'linux-kselftest-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest: Fix vdso_test_abi return status
selftests: skip mincore.check_file_mmap when fs lacks needed support
selftests: openat2: Skip testcases that fail with EOPNOTSUPP
selftests: openat2: Add missing dependency in Makefile
selftests: openat2: Print also errno in failure messages
selftests: futex: Use variable MAKE instead of make
selftests/exec: Remove pipe from TEST_GEN_FILES
selftests/zram: Adapt the situation that /dev/zram0 is being used
selftests/zram01.sh: Fix compression ratio calculation
selftests/zram: Skip max_comp_streams interface on newer kernel
docs/kselftest: clarify running mainline tests on stables
kselftest: signal all child processes
selftests: cpufreq: Write test output to stdout as well
selftests: rtc: Increase test timeout so that all tests run
Duoming Zhou [Thu, 3 Feb 2022 15:08:11 +0000 (23:08 +0800)]
ax25: fix reference count leaks of ax25_dev
The previous commit
d01ffb9eee4a ("ax25: add refcount in ax25_dev
to avoid UAF bugs") introduces refcount into ax25_dev, but there
are reference leak paths in ax25_ctl_ioctl(), ax25_fwd_ioctl(),
ax25_rt_add(), ax25_rt_del() and ax25_rt_opt().
This patch uses ax25_dev_put() and adjusts the position of
ax25_addr_ax25dev() to fix reference cout leaks of ax25_dev.
Fixes:
d01ffb9eee4a ("ax25: add refcount in ax25_dev to avoid UAF bugs")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220203150811.42256-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yannick Vignon [Thu, 3 Feb 2022 16:00:25 +0000 (17:00 +0100)]
net: stmmac: ensure PTP time register reads are consistent
Even if protected from preemption and interrupts, a small time window
remains when the 2 register reads could return inconsistent values,
each time the "seconds" register changes. This could lead to an about
1-second error in the reported time.
Add logic to ensure the "seconds" and "nanoseconds" values are consistent.
Fixes:
92ba6888510c ("stmmac: add the support for PTP hw clock driver")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 3 Feb 2022 21:42:38 +0000 (13:42 -0800)]
Merge https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2022-02-03
We've added 6 non-merge commits during the last 10 day(s) which contain
a total of 7 files changed, 11 insertions(+), 236 deletions(-).
The main changes are:
1) Fix BPF ringbuf to allocate its area with VM_MAP instead of VM_ALLOC
flag which otherwise trips over KASAN, from Hou Tao.
2) Fix unresolved symbol warning in resolve_btfids due to LSM callback
rename, from Alexei Starovoitov.
3) Fix a possible race in inc_misses_counter() when IRQ would trigger
during counter update, from He Fengqing.
4) Fix tooling infra for cross-building with clang upon probing whether
gcc provides the standard libraries, from Jean-Philippe Brucker.
5) Fix silent mode build for resolve_btfids, from Nathan Chancellor.
6) Drop unneeded and outdated lirc.h header copy from tooling infra as
BPF does not require it anymore, from Sean Young.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
tools/resolve_btfids: Do not print any commands when building silently
bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
tools: Ignore errors from `which' when searching a GCC toolchain
tools headers UAPI: remove stale lirc.h
bpf: Fix possible race in inc_misses_counter
bpf: Fix renaming task_getsecid_subj->current_getsecid_subj.
====================
Link: https://lore.kernel.org/r/20220203155815.25689-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mickaël Salaün [Thu, 3 Feb 2022 14:50:29 +0000 (15:50 +0100)]
printk: Fix incorrect __user type in proc_dointvec_minmax_sysadmin()
The move of proc_dointvec_minmax_sysadmin() from kernel/sysctl.c to
kernel/printk/sysctl.c introduced an incorrect __user attribute to the
buffer argument. I spotted this change in [1] as well as the kernel
test robot. Revert this change to please sparse:
kernel/printk/sysctl.c:20:51: warning: incorrect type in argument 3 (different address spaces)
kernel/printk/sysctl.c:20:51: expected void *
kernel/printk/sysctl.c:20:51: got void [noderef] __user *buffer
Fixes:
faaa357a55e0 ("printk: move printk sysctl to printk/sysctl.c")
Link: https://lore.kernel.org/r/20220104155024.48023-2-mic@digikod.net
Reported-by: kernel test robot <lkp@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20220203145029.272640-1-mic@digikod.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Igor Pylypiv [Thu, 27 Jan 2022 23:39:53 +0000 (15:39 -0800)]
Revert "module, async: async_synchronize_full() on module init iff async is used"
This reverts commit
774a1221e862b343388347bac9b318767336b20b.
We need to finish all async code before the module init sequence is
done. In the reverted commit the PF_USED_ASYNC flag was added to mark a
thread that called async_schedule(). Then the PF_USED_ASYNC flag was
used to determine whether or not async_synchronize_full() needs to be
invoked. This works when modprobe thread is calling async_schedule(),
but it does not work if module dispatches init code to a worker thread
which then calls async_schedule().
For example, PCI driver probing is invoked from a worker thread based on
a node where device is attached:
if (cpu < nr_cpu_ids)
error = work_on_cpu(cpu, local_pci_probe, &ddi);
else
error = local_pci_probe(&ddi);
We end up in a situation where a worker thread gets the PF_USED_ASYNC
flag set instead of the modprobe thread. As a result,
async_synchronize_full() is not invoked and modprobe completes without
waiting for the async code to finish.
The issue was discovered while loading the pm80xx driver:
(scsi_mod.scan=async)
modprobe pm80xx worker
...
do_init_module()
...
pci_call_probe()
work_on_cpu(local_pci_probe)
local_pci_probe()
pm8001_pci_probe()
scsi_scan_host()
async_schedule()
worker->flags |= PF_USED_ASYNC;
...
< return from worker >
...
if (current->flags & PF_USED_ASYNC) <--- false
async_synchronize_full();
Commit
21c3c5d28007 ("block: don't request module during elevator init")
fixed the deadlock issue which the reverted commit
774a1221e862
("module, async: async_synchronize_full() on module init iff async is
used") tried to fix.
Since commit
0fdff3ec6d87 ("async, kmod: warn on synchronous
request_module() from async workers") synchronous module loading from
async is not allowed.
Given that the original deadlock issue is fixed and it is no longer
allowed to call synchronous request_module() from async we can remove
PF_USED_ASYNC flag to make module init consistently invoke
async_synchronize_full() unless async module probe is requested.
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 3 Feb 2022 16:15:13 +0000 (08:15 -0800)]
Merge branch 'for-5.17-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Eric's fix for a long standing cgroup1 permission issue where it only
checks for uid 0 instead of CAP which inadvertently allows
unprivileged userns roots to modify release_agent userhelper
- Fixes for the fallout from Waiman's recent cpuset work
* 'for-5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning
cgroup-v1: Require capabilities to set release_agent
cpuset: Fix the bug that subpart_cpus updated wrongly in update_cpumask()
cgroup/cpuset: Make child cpusets restrict parents on v1 hierarchy
Jakub Kicinski [Thu, 3 Feb 2022 16:04:15 +0000 (08:04 -0800)]
Merge branch 'net-ipa-enable-register-retention'
Alex Elder says:
====================
net: ipa: enable register retention
With runtime power management in place, we sometimes need to issue
a command to enable retention of IPA register values before power
collapse. This requires a new Device Tree property, whose presence
will also be used to signal that the command is required.
====================
Link: https://lore.kernel.org/r/20220201150205.468403-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Tue, 1 Feb 2022 15:02:05 +0000 (09:02 -0600)]
net: ipa: request IPA register values be retained
In some cases, the IPA hardware needs to request the always-on
subsystem (AOSS) to coordinate with the IPA microcontroller to
retain IPA register values at power collapse. This is done by
issuing a QMP request to the AOSS microcontroller. A similar
request ondoes that request.
We must get and hold the "QMP" handle early, because we might get
back EPROBE_DEFER for that. But the actual request should be sent
while we know the IPA clock is active, and when we know the
microcontroller is operational.
Fixes:
1aac309d3207 ("net: ipa: use autosuspend")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Tue, 1 Feb 2022 15:02:04 +0000 (09:02 -0600)]
dt-bindings: net: qcom,ipa: add optional qcom,qmp property
For some systems, the IPA driver must make a request to ensure that
its registers are retained across power collapse of the IPA hardware.
On such systems, we'll use the existence of the "qcom,qmp" property
as a signal that this request is required.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Waiman Long [Thu, 3 Feb 2022 03:31:03 +0000 (22:31 -0500)]
cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning
It was found that a "suspicious RCU usage" lockdep warning was issued
with the rcu_read_lock() call in update_sibling_cpumasks(). It is
because the update_cpumasks_hier() function may sleep. So we have
to release the RCU lock, call update_cpumasks_hier() and reacquire
it afterward.
Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks()
instead of stating that in the comment.
Fixes:
4716909cc5c5 ("cpuset: Track cpusets that use parent's effective_cpus")
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Nathan Chancellor [Tue, 1 Feb 2022 21:25:04 +0000 (14:25 -0700)]
tools/resolve_btfids: Do not print any commands when building silently
When building with 'make -s', there is some output from resolve_btfids:
$ make -sj"$(nproc)" oldconfig prepare
MKDIR .../tools/bpf/resolve_btfids/libbpf/
MKDIR .../tools/bpf/resolve_btfids//libsubcmd
LINK resolve_btfids
Silent mode means that no information should be emitted about what is
currently being done. Use the $(silent) variable from Makefile.include
to avoid defining the msg macro so that there is no information printed.
Fixes:
fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220201212503.731732-1-nathan@kernel.org
John Hubbard [Wed, 2 Feb 2022 03:23:17 +0000 (19:23 -0800)]
Revert "mm/gup: small refactoring: simplify try_grab_page()"
This reverts commit
54d516b1d62ff8f17cee2da06e5e4706a0d00b8a
That commit did a refactoring that effectively combined fast and slow
gup paths (again). And that was again incorrect, for two reasons:
a) Fast gup and slow gup get reference counts on pages in different
ways and with different goals: see Linus' writeup in commit
cd1adf1b63a1 ("Revert "mm/gup: remove try_get_page(), call
try_get_compound_head() directly""), and
b) try_grab_compound_head() also has a specific check for
"FOLL_LONGTERM && !is_pinned(page)", that assumes that the caller
can fall back to slow gup. This resulted in new failures, as
recently report by Will McVicker [1].
But (a) has problems too, even though they may not have been reported
yet. So just revert this.
Link: https://lore.kernel.org/r/20220131203504.3458775-1-willmcvicker@google.com
Fixes:
54d516b1d62f ("mm/gup: small refactoring: simplify try_grab_page()")
Reported-and-tested-by: Will McVicker <willmcvicker@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Minchan Kim <minchan@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: stable@vger.kernel.org # 5.15
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 3 Feb 2022 14:45:34 +0000 (06:45 -0800)]
Merge tag 'mips-fixes-5.17_2' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix missed change for PTR->PTR_WD conversion
- kernel-doc fixes
* tag 'mips-fixes-5.17_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: KVM: fix vz.c kernel-doc notation
MIPS: octeon: Fix missed PTR->PTR_WD conversion
Hou Tao [Wed, 2 Feb 2022 06:01:58 +0000 (14:01 +0800)]
bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
After commit
2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages
after mapping"), non-VM_ALLOC mappings will be marked as accessible
in __get_vm_area_node() when KASAN is enabled. But now the flag for
ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access
after vmap() returns. Because the ringbuf area is created by mapping
allocated pages, so use VM_MAP instead.
After the change, info in /proc/vmallocinfo also changes from
[start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmalloc user
to
[start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmap user
Fixes:
457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: syzbot+5ad567a418794b9b5983@syzkaller.appspotmail.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220202060158.6260-1-houtao1@huawei.com
Daniel Borkmann [Tue, 1 Feb 2022 19:39:42 +0000 (20:39 +0100)]
net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work
syzkaller was able to trigger a deadlock for NTF_MANAGED entries [0]:
kworker/0:16/14617 is trying to acquire lock:
ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652
[...]
but task is already holding lock:
ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: neigh_managed_work+0x35/0x250 net/core/neighbour.c:1572
The neighbor entry turned to NUD_FAILED state, where __neigh_event_send()
triggered an immediate probe as per commit
cd28ca0a3dd1 ("neigh: reduce
arp latency") via neigh_probe() given table lock was held.
One option to fix this situation is to defer the neigh_probe() back to
the neigh_timer_handler() similarly as pre
cd28ca0a3dd1. For the case
of NTF_MANAGED, this deferral is acceptable given this only happens on
actual failure state and regular / expected state is NUD_VALID with the
entry already present.
The fix adds a parameter to __neigh_event_send() in order to communicate
whether immediate probe is allowed or disallowed. Existing call-sites
of neigh_event_send() default as-is to immediate probe. However, the
neigh_managed_work() disables it via use of neigh_event_send_probe().
[0] <TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_deadlock_bug kernel/locking/lockdep.c:2956 [inline]
check_deadlock kernel/locking/lockdep.c:2999 [inline]
validate_chain kernel/locking/lockdep.c:3788 [inline]
__lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5027
lock_acquire kernel/locking/lockdep.c:5639 [inline]
lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5604
__raw_write_lock_bh include/linux/rwlock_api_smp.h:202 [inline]
_raw_write_lock_bh+0x2f/0x40 kernel/locking/spinlock.c:334
___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652
ip6_finish_output2+0x1070/0x14f0 net/ipv6/ip6_output.c:123
__ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
__ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170
ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224
dst_output include/net/dst.h:451 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
ndisc_send_skb+0xa99/0x17f0 net/ipv6/ndisc.c:508
ndisc_send_ns+0x3a9/0x840 net/ipv6/ndisc.c:650
ndisc_solicit+0x2cd/0x4f0 net/ipv6/ndisc.c:742
neigh_probe+0xc2/0x110 net/core/neighbour.c:1040
__neigh_event_send+0x37d/0x1570 net/core/neighbour.c:1201
neigh_event_send include/net/neighbour.h:470 [inline]
neigh_managed_work+0x162/0x250 net/core/neighbour.c:1574
process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307
worker_thread+0x657/0x1110 kernel/workqueue.c:2454
kthread+0x2e9/0x3a0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
Fixes:
7482e3841d52 ("net, neigh: Add NTF_MANAGED flag for managed neighbor entries")
Reported-by: syzbot+5239d0e1778a500d477a@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Tested-by: syzbot+5239d0e1778a500d477a@syzkaller.appspotmail.com
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220201193942.5055-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Tue, 1 Feb 2022 18:46:40 +0000 (10:46 -0800)]
tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()
tcp_shift_skb_data() might collapse three packets into a larger one.
P_A, P_B, P_C -> P_ABC
Historically, it used a single tcp_skb_can_collapse_to(P_A) call,
because it was enough.
In commit
85712484110d ("tcp: coalesce/collapse must respect MPTCP extensions"),
this call was replaced by a call to tcp_skb_can_collapse(P_A, P_B)
But the now needed test over P_C has been missed.
This probably broke MPTCP.
Then later, commit
9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs")
added an extra condition to tcp_skb_can_collapse(), but the missing call
from tcp_shift_skb_data() is also breaking TCP zerocopy, because P_A and P_C
might have different skb_zcopy_pure() status.
Fixes:
85712484110d ("tcp: coalesce/collapse must respect MPTCP extensions")
Fixes:
9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: Talal Ahmad <talalahmad@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220201184640.756716-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 2 Feb 2022 18:14:31 +0000 (10:14 -0800)]
Merge tag 'nfsd-5.17-1' of git://git./linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Notable bug fixes:
- Ensure SM_NOTIFY doesn't crash the NFS server host
- Ensure NLM locks are cleaned up after client reboot
- Fix a leak of internal NFSv4 lease information"
* tag 'nfsd-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client.
lockd: fix failure to cleanup client locks
lockd: fix server crash on reboot of client holding lock
Linus Torvalds [Wed, 2 Feb 2022 18:08:52 +0000 (10:08 -0800)]
Merge tag 'fsnotify_for_v5.17-rc3' of git://git./linux/kernel/git/jack/linux-fs
Pull fanotify fix from Jan Kara:
"Fix stale file descriptor in copy_event_to_user"
* tag 'fsnotify_for_v5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: Fix stale file descriptor in copy_event_to_user()
Linus Torvalds [Wed, 2 Feb 2022 18:00:08 +0000 (10:00 -0800)]
Merge tag 'linux-kselftest-kunit-fixes-5.17-rc3' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"A single fix to an error seen on qemu due to a missing import"
* tag 'linux-kselftest-kunit-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Import missing importlib.abc
Linus Torvalds [Wed, 2 Feb 2022 17:50:17 +0000 (09:50 -0800)]
Merge tag 'pinctrl-v5.17-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Most interesting and urgent is the Intel stuff affecting Chromebooks
and laptops.
- Fix up group name building on the Intel Thunderbay
- Fix interrupt problems on the Intel Cherryview
- Fix some pin data on the Sunxi H616
- Fix up the CONFIG_PINCTRL_ST Kconfig sort order as noted during the
merge window
- Fix an unexpected interrupt problem on the Intel Sunrisepoint
- Fix a glitch when updating IRQ flags on all Intel pin controllers
- Revert a Zynqmp patch to unify the pin naming, let's find some
better solution
- Fix some error paths in the Broadcom BCM2835 driver
- Fix a Kconfig problem pertaining to the BCM63XX drivers
- Fix the regmap support in the Microchip SGPIO driver"
* tag 'pinctrl-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: microchip-sgpio: Fix support for regmap
pinctrl: bcm63xx: fix unmet dependency on REGMAP for GPIO_REGMAP
pinctrl: bcm2835: Fix a few error paths
pinctrl: zynqmp: Revert "Unify pin naming"
pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line
pinctrl: intel: fix unexpected interrupt
pinctrl: Place correctly CONFIG_PINCTRL_ST in the Makefile
pinctrl: sunxi: Fix H616 I2S3 pin data
pinctrl: cherryview: Trigger hwirq0 for interrupt-lines without a mapping
pinctrl: thunderbay: rework loops looking for groups names
pinctrl: thunderbay: comment process of building functions a bit
Steen Hegelund [Wed, 2 Feb 2022 08:30:39 +0000 (09:30 +0100)]
net: sparx5: do not refer to skb after passing it on
Do not try to use any SKB fields after the packet has been passed up in the
receive stack.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220202083039.3774851-1-steen.hegelund@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vratislav Bendel [Wed, 2 Feb 2022 11:25:11 +0000 (12:25 +0100)]
selinux: fix double free of cond_list on error paths
On error path from cond_read_list() and duplicate_policydb_cond_list()
the cond_list_destroy() gets called a second time in caller functions,
resulting in NULL pointer deref. Fix this by resetting the
cond_list_len to 0 in cond_list_destroy(), making subsequent calls a
noop.
Also consistently reset the cond_list pointer to NULL after freeing.
Cc: stable@vger.kernel.org
Signed-off-by: Vratislav Bendel <vbendel@redhat.com>
[PM: fix line lengths in the description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Dmitry V. Levin [Wed, 2 Feb 2022 03:09:04 +0000 (06:09 +0300)]
Partially revert "net/smc: Add netlink net namespace support"
The change of sizeof(struct smc_diag_linkinfo) by commit
79d39fc503b4
("net/smc: Add netlink net namespace support") introduced an ABI
regression: since struct smc_diag_lgrinfo contains an object of
type "struct smc_diag_linkinfo", offset of all subsequent members
of struct smc_diag_lgrinfo was changed by that change.
As result, applications compiled with the old version
of struct smc_diag_linkinfo will receive garbage in
struct smc_diag_lgrinfo.role if the kernel implements
this new version of struct smc_diag_linkinfo.
Fix this regression by reverting the part of commit
79d39fc503b4 that
changes struct smc_diag_linkinfo. After all, there is SMC_GEN_NETLINK
interface which is good enough, so there is probably no need to touch
the smc_diag ABI in the first place.
Fixes:
79d39fc503b4 ("net/smc: Add netlink net namespace support")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20220202030904.GA9742@altlinux.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David S. Miller [Wed, 2 Feb 2022 14:19:38 +0000 (14:19 +0000)]
Merge tag 'mlx5-fixes-2022-02-01' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-02-01
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
Sorry about the long series, but I had to move the top two patches from
net-next to net to help avoiding a build break when kspp branch is merged
into linus-next on next merge window.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 2 Feb 2022 05:03:15 +0000 (21:03 -0800)]
Merge branch '1GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-02-01
This series contains updates to e1000e driver only.
Sasha removes CSME handshake with TGL platform as this is not supported
and is causing hardware unit hangs to be reported.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: Handshake with CSME starts from ADL platforms
e1000e: Separate ADP board type from TGP
====================
Link: https://lore.kernel.org/r/20220201173754.580305-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kees Cook [Mon, 24 Jan 2022 17:20:28 +0000 (09:20 -0800)]
net/mlx5e: Avoid field-overflowing memcpy()
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use flexible arrays instead of zero-element arrays (which look like they
are always overflowing) and split the cross-field memcpy() into two halves
that can be appropriately bounds-checked by the compiler.
We were doing:
#define ETH_HLEN 14
#define VLAN_HLEN 4
...
#define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN)
...
struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi);
...
struct mlx5_wqe_eth_seg *eseg = &wqe->eth;
struct mlx5_wqe_data_seg *dseg = wqe->data;
...
memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE);
target is wqe->eth.inline_hdr.start (which the compiler sees as being
2 bytes in size), but copying 18, intending to write across start
(really vlan_tci, 2 bytes). The remaining 16 bytes get written into
wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr
(8 bytes).
struct mlx5e_tx_wqe {
struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */
struct mlx5_wqe_eth_seg eth; /* 16 16 */
struct mlx5_wqe_data_seg data[]; /* 32 0 */
/* size: 32, cachelines: 1, members: 3 */
/* last cacheline: 32 bytes */
};
struct mlx5_wqe_eth_seg {
u8 swp_outer_l4_offset; /* 0 1 */
u8 swp_outer_l3_offset; /* 1 1 */
u8 swp_inner_l4_offset; /* 2 1 */
u8 swp_inner_l3_offset; /* 3 1 */
u8 cs_flags; /* 4 1 */
u8 swp_flags; /* 5 1 */
__be16 mss; /* 6 2 */
__be32 flow_table_metadata; /* 8 4 */
union {
struct {
__be16 sz; /* 12 2 */
u8 start[2]; /* 14 2 */
} inline_hdr; /* 12 4 */
struct {
__be16 type; /* 12 2 */
__be16 vlan_tci; /* 14 2 */
} insert; /* 12 4 */
__be32 trailer; /* 12 4 */
}; /* 12 4 */
/* size: 16, cachelines: 1, members: 9 */
/* last cacheline: 16 bytes */
};
struct mlx5_wqe_data_seg {
__be32 byte_count; /* 0 4 */
__be32 lkey; /* 4 4 */
__be64 addr; /* 8 8 */
/* size: 16, cachelines: 1, members: 3 */
/* last cacheline: 16 bytes */
};
So, split the memcpy() so the compiler can reason about the buffer
sizes.
"pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe
nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object
code changes (i.e. only source line number induced differences and
optimizations).
Fixes:
b5503b994ed5 ("net/mlx5e: XDP TX forwarding support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Kees Cook [Mon, 24 Jan 2022 17:22:41 +0000 (09:22 -0800)]
net/mlx5e: Use struct_group() for memcpy() region
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use struct_group() in struct vlan_ethhdr around members h_dest and
h_source, so they can be referenced together. This will allow memcpy()
and sizeof() to more easily reason about sizes, improve readability,
and avoid future warnings about writing beyond the end of h_dest.
"pahole" shows no size nor member offset changes to struct vlan_ethhdr.
"objdump -d" shows no object code changes.
Fixes:
34802a42b352 ("net/mlx5e: Do not modify the TX SKB")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Tue, 1 Feb 2022 13:27:48 +0000 (15:27 +0200)]
net/mlx5e: Avoid implicit modify hdr for decap drop rule
Currently the driver adds implicit modify hdr action for
decap rules on tunnel devices if the port is an ovs port.
This is also done if the action is drop and makes the modify
hdr redundant and also the FW doesn't support it and will generate
a syndrome.
kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3)
Fix it by adding the implicit modify hdr only for fwd actions.
Fixes:
b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device")
Fixes:
077cdda764c7 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Raed Salem [Thu, 2 Dec 2021 15:49:01 +0000 (17:49 +0200)]
net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic
IPsec Tunnel mode crypto offload software parser (SWP) setting in data
path currently always set the inner L4 offset regardless of the
encapsulated L4 header type and whether it exists in the first place,
this breaks non TCP/UDP traffic as such.
Set the SWP inner L4 offset only when the IPsec tunnel encapsulated L4
header protocol is TCP/UDP.
While at it fix inner ip protocol read for setting MLX5_ETH_WQE_SWP_INNER_L4_UDP
flag to address the case where the ip header protocol is IPv6.
Fixes:
f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Raed Salem [Thu, 2 Dec 2021 15:43:50 +0000 (17:43 +0200)]
net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic
IPsec crypto offload always set the ethernet segment checksum flags with
the inner L4 header checksum flag enabled for encapsulated IPsec offloaded
packet regardless of the encapsulated L4 header type, and even if it
doesn't exists in the first place, this breaks non TCP/UDP traffic as
such.
Set the inner L4 checksum flag only when the encapsulated L4 header
protocol is TCP/UDP using software parser swp_inner_l4_offset field as
indication.
Fixes:
5cfb540ef27b ("net/mlx5e: Set IPsec WAs only in IP's non checksum partial case.")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maxim Mikityanskiy [Tue, 18 Jan 2022 11:31:54 +0000 (13:31 +0200)]
net/mlx5e: Don't treat small ceil values as unlimited in HTB offload
The hardware spec defines max_average_bw == 0 as "unlimited bandwidth".
max_average_bw is calculated as `ceil / BYTES_IN_MBIT`, which can become
0 when ceil is small, leading to an undesired effect of having no
bandwidth limit.
This commit fixes it by rounding up small values of ceil to 1 Mbit/s.
Fixes:
214baf22870c ("net/mlx5e: Support HTB offload")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Dickman [Sun, 30 Jan 2022 14:00:41 +0000 (16:00 +0200)]
net/mlx5: E-Switch, Fix uninitialized variable modact
The variable modact is not initialized before used in command
modify header allocation which can cause command to fail.
Fix by initializing modact with zeros.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes:
8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Dickman [Thu, 13 Jan 2022 13:11:42 +0000 (15:11 +0200)]
net/mlx5e: Fix handling of wrong devices during bond netevent
Current implementation of bond netevent handler only check if
the handled netdev is VF representor and it missing a check if
the VF representor is on the same phys device of the bond handling
the netevent.
Fix by adding the missing check and optimizing the check if
the netdev is VF representor so it will not access uninitialized
private data and crashes.
BUG: kernel NULL pointer dereference, address:
000000000000036c
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
Workqueue: eth3bond0 bond_mii_monitor [bonding]
RIP: 0010:mlx5e_is_uplink_rep+0xc/0x50 [mlx5_core]
RSP: 0018:
ffff88812d69fd60 EFLAGS:
00010282
RAX:
0000000000000000 RBX:
ffff8881cf800000 RCX:
0000000000000000
RDX:
ffff88812d69fe10 RSI:
000000000000001b RDI:
ffff8881cf800880
RBP:
ffff8881cf800000 R08:
00000445cabccf2b R09:
0000000000000008
R10:
0000000000000004 R11:
0000000000000008 R12:
ffff88812d69fe10
R13:
00000000fffffffe R14:
ffff88820c0f9000 R15:
0000000000000000
FS:
0000000000000000(0000) GS:
ffff88846fb00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000000000000036c CR3:
0000000103d80006 CR4:
0000000000370ea0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
mlx5e_eswitch_uplink_rep+0x31/0x40 [mlx5_core]
mlx5e_rep_is_lag_netdev+0x94/0xc0 [mlx5_core]
mlx5e_rep_esw_bond_netevent+0xeb/0x3d0 [mlx5_core]
raw_notifier_call_chain+0x41/0x60
call_netdevice_notifiers_info+0x34/0x80
netdev_lower_state_changed+0x4e/0xa0
bond_mii_monitor+0x56b/0x640 [bonding]
process_one_work+0x1b9/0x390
worker_thread+0x4d/0x3d0
? rescuer_thread+0x350/0x350
kthread+0x124/0x150
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
Fixes:
7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Khalid Manaa [Wed, 26 Jan 2022 12:25:55 +0000 (14:25 +0200)]
net/mlx5e: Fix broken SKB allocation in HW-GRO
In case the HW doesn't perform header-data split, it will write the whole
packet into the data buffer in the WQ, in this case the SHAMPO CQE handler
couldn't use the header entry to build the SKB, instead it should allocate
a new memory to build the SKB using the function:
mlx5e_skb_from_cqe_mpwrq_nonlinear.
Fixes:
f97d5c2a453e ("net/mlx5e: Add handle SHAMPO cqe support")
Signed-off-by: Khalid Manaa <khalidm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Khalid Manaa [Wed, 26 Jan 2022 12:14:58 +0000 (14:14 +0200)]
net/mlx5e: Fix wrong calculation of header index in HW_GRO
The HW doesn't wrap the CQE.shampo.header_index field according to the
headers buffer size, instead it always increases it until reaching overflow
of u16 size.
Thus the mlx5e_handle_rx_cqe_mpwrq_shampo handler should mask the
CQE header_index field to find the actual header index in the headers buffer.
Fixes:
f97d5c2a453e ("net/mlx5e: Add handle SHAMPO cqe support")
Signed-off-by: Khalid Manaa <khalidm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Mon, 24 Jan 2022 11:56:26 +0000 (13:56 +0200)]
net/mlx5: Bridge, Fix devlink deadlock on net namespace deletion
When changing mode to switchdev, rep bridge init registered to netdevice
notifier holds the devlink lock and then takes pernet_ops_rwsem.
At that time deleting a netns holds pernet_ops_rwsem and then takes
the devlink lock.
Example sequence is:
$ ip netns add foo
$ devlink dev eswitch set pci/0000:00:08.0 mode switchdev &
$ ip netns del foo
deleting netns trace:
[ 1185.365555] ? devlink_pernet_pre_exit+0x74/0x1c0
[ 1185.368331] ? mutex_lock_io_nested+0x13f0/0x13f0
[ 1185.370984] ? xt_find_table+0x40/0x100
[ 1185.373244] ? __mutex_lock+0x24a/0x15a0
[ 1185.375494] ? net_generic+0xa0/0x1c0
[ 1185.376844] ? wait_for_completion_io+0x280/0x280
[ 1185.377767] ? devlink_pernet_pre_exit+0x74/0x1c0
[ 1185.378686] devlink_pernet_pre_exit+0x74/0x1c0
[ 1185.379579] ? devlink_nl_cmd_get_dumpit+0x3a0/0x3a0
[ 1185.380557] ? xt_find_table+0xda/0x100
[ 1185.381367] cleanup_net+0x372/0x8e0
changing mode to switchdev trace:
[ 1185.411267] down_write+0x13a/0x150
[ 1185.412029] ? down_write_killable+0x180/0x180
[ 1185.413005] register_netdevice_notifier+0x1e/0x210
[ 1185.414000] mlx5e_rep_bridge_init+0x181/0x360 [mlx5_core]
[ 1185.415243] mlx5e_uplink_rep_enable+0x269/0x480 [mlx5_core]
[ 1185.416464] ? mlx5e_uplink_rep_disable+0x210/0x210 [mlx5_core]
[ 1185.417749] mlx5e_attach_netdev+0x232/0x400 [mlx5_core]
[ 1185.418906] mlx5e_netdev_attach_profile+0x15b/0x1e0 [mlx5_core]
[ 1185.420172] mlx5e_netdev_change_profile+0x15a/0x1d0 [mlx5_core]
[ 1185.421459] mlx5e_vport_rep_load+0x557/0x780 [mlx5_core]
[ 1185.422624] ? mlx5e_stats_grp_vport_rep_num_stats+0x10/0x10 [mlx5_core]
[ 1185.424006] mlx5_esw_offloads_rep_load+0xdb/0x190 [mlx5_core]
[ 1185.425277] esw_offloads_enable+0xd74/0x14a0 [mlx5_core]
Fix this by registering rep bridges for per net netdev notifier
instead of global one, which operats on the net namespace without holding
the pernet_ops_rwsem.
Fixes:
19e9bfa044f3 ("net/mlx5: Bridge, add offload infrastructure")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Dima Chumak [Mon, 17 Jan 2022 13:32:16 +0000 (15:32 +0200)]
net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
Only prio 1 is supported for nic mode when there is no ignore flow level
support in firmware. But for switchdev mode, which supports fixed number
of statically pre-allocated prios, this restriction is not relevant so
it can be relaxed.
Fixes:
d671e109bd85 ("net/mlx5: Fix tc max supported prio for nic mode")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Mon, 17 Jan 2022 13:00:30 +0000 (15:00 +0200)]
net/mlx5e: TC, Reject rules with forward and drop actions
Such rules are redundant but allowed and passed to the driver.
The driver does not support offloading such rules so return an error.
Fixes:
03a9d11e6eeb ("net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloads")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maher Sanalla [Thu, 13 Jan 2022 13:48:48 +0000 (15:48 +0200)]
net/mlx5: Use del_timer_sync in fw reset flow of halting poll
Substitute del_timer() with del_timer_sync() in fw reset polling
deactivation flow, in order to prevent a race condition which occurs
when del_timer() is called and timer is deactivated while another
process is handling the timer interrupt. A situation that led to
the following call trace:
RIP: 0010:run_timer_softirq+0x137/0x420
<IRQ>
recalibrate_cpu_khz+0x10/0x10
ktime_get+0x3e/0xa0
? sched_clock_cpu+0xb/0xc0
__do_softirq+0xf5/0x2ea
irq_exit_rcu+0xc1/0xf0
sysvec_apic_timer_interrupt+0x9e/0xc0
asm_sysvec_apic_timer_interrupt+0x12/0x20
</IRQ>
Fixes:
38b9f903f22b ("net/mlx5: Handle sync reset request event")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Gal Pressman [Sun, 16 Jan 2022 07:07:22 +0000 (09:07 +0200)]
net/mlx5e: Fix module EEPROM query
When querying the module EEPROM, there was a misusage of the 'offset'
variable vs the 'query.offset' field.
Fix that by always using 'offset' and assigning its value to
'query.offset' right before the mcia register read call.
While at it, the cross-pages read size adjustment was changed to be more
intuitive.
Fixes:
e19b0a3474ab ("net/mlx5: Refactor module EEPROM query")
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Tue, 4 Jan 2022 08:38:02 +0000 (10:38 +0200)]
net/mlx5e: TC, Reject rules with drop and modify hdr action
This kind of action is not supported by firmware and generates a
syndrome.
kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3)
Fixes:
d7e75a325cb2 ("net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Vlad Buslov [Thu, 6 Jan 2022 16:45:26 +0000 (18:45 +0200)]
net/mlx5: Bridge, ensure dev_name is null-terminated
Even though net_device->name is guaranteed to be null-terminated string of
size<=IFNAMSIZ, the test robot complains that return value of netdev_name()
can be larger:
In file included from include/trace/define_trace.h:102,
from drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:113,
from drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c:12:
drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h: In function 'trace_event_raw_event_mlx5_esw_bridge_fdb_template':
>> drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:24:29: warning: 'strncpy' output may be truncated copying 16 bytes from a string of length 20 [-Wstringop-truncation]
24 | strncpy(__entry->dev_name,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
25 | netdev_name(fdb->dev),
| ~~~~~~~~~~~~~~~~~~~~~~
26 | IFNAMSIZ);
| ~~~~~~~~~
This is caused by the fact that default value of IFNAMSIZ is 16, while
placeholder value that is returned by netdev_name() for unnamed net devices
is larger than that.
The offending code is in a tracing function that is only called for mlx5
representors, so there is no straightforward way to reproduce the issue but
let's fix it for correctness sake by replacing strncpy() with strscpy() to
ensure that resulting string is always null-terminated.
Fixes:
9724fd5d9c2a ("net/mlx5: Bridge, add tracepoints")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Vlad Buslov [Thu, 6 Jan 2022 14:40:18 +0000 (16:40 +0200)]
net/mlx5: Bridge, take rtnl lock in init error handler
The mlx5_esw_bridge_cleanup() is expected to be called with rtnl lock
taken, which is true for mlx5e_rep_bridge_cleanup() function but not for
error handling code in mlx5e_rep_bridge_init(). Add missing rtnl
lock/unlock calls and extend both mlx5_esw_bridge_cleanup() and its dual
function mlx5_esw_bridge_init() with ASSERT_RTNL() to verify the invariant
from now on.
Fixes:
7cd6a54a8285 ("net/mlx5: Bridge, handle FDB events")
Fixes:
19e9bfa044f3 ("net/mlx5: Bridge, add offload infrastructure")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Jakub Kicinski [Wed, 2 Feb 2022 04:39:46 +0000 (20:39 -0800)]
Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-01-31
This series contains updates to i40e driver only.
Jedrzej fixes a condition check which would cause an error when
resetting bandwidth when DCB is active with one TC.
Karen resolves a null pointer dereference that could occur when removing
the driver while VSI rings are being disabled.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Fix reset path while removing the driver
i40e: Fix reset bw limit when DCB enabled with 1 TC
====================
Link: https://lore.kernel.org/r/20220201000522.505909-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lior Nahmanson [Sun, 30 Jan 2022 11:37:52 +0000 (13:37 +0200)]
net: macsec: Verify that send_sci is on when setting Tx sci explicitly
When setting Tx sci explicit, the Rx side is expected to use this
sci and not recalculate it from the packet.However, in case of Tx sci
is explicit and send_sci is off, the receiver is wrongly recalculate
the sci from the source MAC address which most likely be different
than the explicit sci.
Fix by preventing such configuration when macsec newlink is established
and return EINVAL error code on such cases.
Fixes:
c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Georgi Valkov [Tue, 1 Feb 2022 07:16:18 +0000 (08:16 +0100)]
ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback
When rx_buf is allocated we need to account for IPHETH_IP_ALIGN,
which reduces the usable size by 2 bytes. Otherwise we have 1512
bytes usable instead of 1514, and if we receive more than 1512
bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW,
after which the driver malfunctiones and all communication stops.
Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75
Fixes:
f33d9e2b48a3 ("usbnet: ipheth: fix connectivity with iOS 14")
Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/all/B60B8A4B-92A0-49B3-805D-809A2433B46C@abv.bg/
Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Tue, 1 Feb 2022 06:52:54 +0000 (22:52 -0800)]
tcp: fix mem under-charging with zerocopy sendmsg()
We got reports of following warning in inet_sock_destruct()
WARN_ON(sk_forward_alloc_get(sk));
Whenever we add a non zero-copy fragment to a pure zerocopy skb,
we have to anticipate that whole skb->truesize will be uncharged
when skb is finally freed.
skb->data_len is the payload length. But the memory truesize
estimated by __zerocopy_sg_from_iter() is page aligned.
Fixes:
9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Talal Ahmad <talalahmad@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20220201065254.680532-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Tue, 1 Feb 2022 02:23:58 +0000 (18:23 -0800)]
af_packet: fix data-race in packet_setsockopt / packet_setsockopt
When packet_setsockopt( PACKET_FANOUT_DATA ) reads po->fanout,
no lock is held, meaning that another thread can change po->fanout.
Given that po->fanout can only be set once during the socket lifetime
(it is only cleared from fanout_release()), we can use
READ_ONCE()/WRITE_ONCE() to document the race.
BUG: KCSAN: data-race in packet_setsockopt / packet_setsockopt
write to 0xffff88813ae8e300 of 8 bytes by task 14653 on cpu 0:
fanout_add net/packet/af_packet.c:1791 [inline]
packet_setsockopt+0x22fe/0x24a0 net/packet/af_packet.c:3931
__sys_setsockopt+0x209/0x2a0 net/socket.c:2180
__do_sys_setsockopt net/socket.c:2191 [inline]
__se_sys_setsockopt net/socket.c:2188 [inline]
__x64_sys_setsockopt+0x62/0x70 net/socket.c:2188
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff88813ae8e300 of 8 bytes by task 14654 on cpu 1:
packet_setsockopt+0x691/0x24a0 net/packet/af_packet.c:3935
__sys_setsockopt+0x209/0x2a0 net/socket.c:2180
__do_sys_setsockopt net/socket.c:2191 [inline]
__se_sys_setsockopt net/socket.c:2188 [inline]
__x64_sys_setsockopt+0x62/0x70 net/socket.c:2188
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x0000000000000000 -> 0xffff888106f8c000
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 14654 Comm: syz-executor.3 Not tainted 5.16.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes:
47dceb8ecdc1 ("packet: add classic BPF fanout mode")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220201022358.330621-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Tue, 1 Feb 2022 01:21:06 +0000 (17:21 -0800)]
rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink()
While looking at one unrelated syzbot bug, I found the replay logic
in __rtnl_newlink() to potentially trigger use-after-free.
It is better to clear master_dev and m_ops inside the loop,
in case we have to replay it.
Fixes:
ba7d49b1f0f8 ("rtnetlink: provide api for getting and setting slave info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20220201012106.216495-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Mon, 31 Jan 2022 17:20:18 +0000 (09:20 -0800)]
net: sched: fix use-after-free in tc_new_tfilter()
Whenever tc_new_tfilter() jumps back to replay: label,
we need to make sure @q and @chain local variables are cleared again,
or risk use-after-free as in [1]
For consistency, apply the same fix in tc_ctl_chain()
BUG: KASAN: use-after-free in mini_qdisc_pair_swap+0x1b9/0x1f0 net/sched/sch_generic.c:1581
Write of size 8 at addr
ffff8880985c4b08 by task syz-executor.4/1945
CPU: 0 PID: 1945 Comm: syz-executor.4 Not tainted
5.17.0-rc1-syzkaller-00495-gff58831fa02d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
mini_qdisc_pair_swap+0x1b9/0x1f0 net/sched/sch_generic.c:1581
tcf_chain_head_change_item net/sched/cls_api.c:372 [inline]
tcf_chain0_head_change.isra.0+0xb9/0x120 net/sched/cls_api.c:386
tcf_chain_tp_insert net/sched/cls_api.c:1657 [inline]
tcf_chain_tp_insert_unique net/sched/cls_api.c:1707 [inline]
tc_new_tfilter+0x1e67/0x2350 net/sched/cls_api.c:2086
rtnetlink_rcv_msg+0x80d/0xb80 net/core/rtnetlink.c:5583
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:725
____sys_sendmsg+0x331/0x810 net/socket.c:2413
___sys_sendmsg+0xf3/0x170 net/socket.c:2467
__sys_sendmmsg+0x195/0x470 net/socket.c:2553
__do_sys_sendmmsg net/socket.c:2582 [inline]
__se_sys_sendmmsg net/socket.c:2579 [inline]
__x64_sys_sendmmsg+0x99/0x100 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f2647172059
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007f2645aa5168 EFLAGS:
00000246 ORIG_RAX:
0000000000000133
RAX:
ffffffffffffffda RBX:
00007f2647285100 RCX:
00007f2647172059
RDX:
040000000000009f RSI:
00000000200002c0 RDI:
0000000000000006
RBP:
00007f26471cc08d R08:
0000000000000000 R09:
0000000000000000
R10:
9e00000000000000 R11:
0000000000000246 R12:
0000000000000000
R13:
00007fffb3f7f02f R14:
00007f2645aa5300 R15:
0000000000022000
</TASK>
Allocated by task 1944:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
kasan_set_track mm/kasan/common.c:45 [inline]
set_alloc_info mm/kasan/common.c:436 [inline]
____kasan_kmalloc mm/kasan/common.c:515 [inline]
____kasan_kmalloc mm/kasan/common.c:474 [inline]
__kasan_kmalloc+0xa9/0xd0 mm/kasan/common.c:524
kmalloc_node include/linux/slab.h:604 [inline]
kzalloc_node include/linux/slab.h:726 [inline]
qdisc_alloc+0xac/0xa10 net/sched/sch_generic.c:941
qdisc_create.constprop.0+0xce/0x10f0 net/sched/sch_api.c:1211
tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660
rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5592
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:725
____sys_sendmsg+0x331/0x810 net/socket.c:2413
___sys_sendmsg+0xf3/0x170 net/socket.c:2467
__sys_sendmmsg+0x195/0x470 net/socket.c:2553
__do_sys_sendmmsg net/socket.c:2582 [inline]
__se_sys_sendmmsg net/socket.c:2579 [inline]
__x64_sys_sendmmsg+0x99/0x100 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 3609:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
kasan_set_track+0x21/0x30 mm/kasan/common.c:45
kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
____kasan_slab_free mm/kasan/common.c:366 [inline]
____kasan_slab_free+0x130/0x160 mm/kasan/common.c:328
kasan_slab_free include/linux/kasan.h:236 [inline]
slab_free_hook mm/slub.c:1728 [inline]
slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1754
slab_free mm/slub.c:3509 [inline]
kfree+0xcb/0x280 mm/slub.c:4562
rcu_do_batch kernel/rcu/tree.c:2527 [inline]
rcu_core+0x7b8/0x1540 kernel/rcu/tree.c:2778
__do_softirq+0x29b/0x9c2 kernel/softirq.c:558
Last potentially related work creation:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
__kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348
__call_rcu kernel/rcu/tree.c:3026 [inline]
call_rcu+0xb1/0x740 kernel/rcu/tree.c:3106
qdisc_put_unlocked+0x6f/0x90 net/sched/sch_generic.c:1109
tcf_block_release+0x86/0x90 net/sched/cls_api.c:1238
tc_new_tfilter+0xc0d/0x2350 net/sched/cls_api.c:2148
rtnetlink_rcv_msg+0x80d/0xb80 net/core/rtnetlink.c:5583
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:725
____sys_sendmsg+0x331/0x810 net/socket.c:2413
___sys_sendmsg+0xf3/0x170 net/socket.c:2467
__sys_sendmmsg+0x195/0x470 net/socket.c:2553
__do_sys_sendmmsg net/socket.c:2582 [inline]
__se_sys_sendmmsg net/socket.c:2579 [inline]
__x64_sys_sendmmsg+0x99/0x100 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at
ffff8880985c4800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 776 bytes inside of
1024-byte region [
ffff8880985c4800,
ffff8880985c4c00)
The buggy address belongs to the page:
page:
ffffea0002617000 refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x985c0
head:
ffffea0002617000 order:3 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw:
00fff00000010200 0000000000000000 dead000000000122 ffff888010c41dc0
raw:
0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x1d20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL), pid 1941, ts
1038999441284, free_ts
1033444432829
prep_new_page mm/page_alloc.c:2434 [inline]
get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165
__alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389
alloc_pages+0x1aa/0x310 mm/mempolicy.c:2271
alloc_slab_page mm/slub.c:1799 [inline]
allocate_slab mm/slub.c:1944 [inline]
new_slab+0x28a/0x3b0 mm/slub.c:2004
___slab_alloc+0x87c/0xe90 mm/slub.c:3018
__slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3105
slab_alloc_node mm/slub.c:3196 [inline]
slab_alloc mm/slub.c:3238 [inline]
__kmalloc+0x2fb/0x340 mm/slub.c:4420
kmalloc include/linux/slab.h:586 [inline]
kzalloc include/linux/slab.h:715 [inline]
__register_sysctl_table+0x112/0x1090 fs/proc/proc_sysctl.c:1335
neigh_sysctl_register+0x2c8/0x5e0 net/core/neighbour.c:3787
devinet_sysctl_register+0xb1/0x230 net/ipv4/devinet.c:2618
inetdev_init+0x286/0x580 net/ipv4/devinet.c:278
inetdev_event+0xa8a/0x15d0 net/ipv4/devinet.c:1532
notifier_call_chain+0xb5/0x200 kernel/notifier.c:84
call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1919
call_netdevice_notifiers_extack net/core/dev.c:1931 [inline]
call_netdevice_notifiers net/core/dev.c:1945 [inline]
register_netdevice+0x1073/0x1500 net/core/dev.c:9698
veth_newlink+0x59c/0xa90 drivers/net/veth.c:1722
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1352 [inline]
free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404
free_unref_page_prepare mm/page_alloc.c:3325 [inline]
free_unref_page+0x19/0x690 mm/page_alloc.c:3404
release_pages+0x748/0x1220 mm/swap.c:956
tlb_batch_pages_flush mm/mmu_gather.c:50 [inline]
tlb_flush_mmu_free mm/mmu_gather.c:243 [inline]
tlb_flush_mmu+0xe9/0x6b0 mm/mmu_gather.c:250
zap_pte_range mm/memory.c:1441 [inline]
zap_pmd_range mm/memory.c:1490 [inline]
zap_pud_range mm/memory.c:1519 [inline]
zap_p4d_range mm/memory.c:1540 [inline]
unmap_page_range+0x1d1d/0x2a30 mm/memory.c:1561
unmap_single_vma+0x198/0x310 mm/memory.c:1606
unmap_vmas+0x16b/0x2f0 mm/memory.c:1638
exit_mmap+0x201/0x670 mm/mmap.c:3178
__mmput+0x122/0x4b0 kernel/fork.c:1114
mmput+0x56/0x60 kernel/fork.c:1135
exit_mm kernel/exit.c:507 [inline]
do_exit+0xa3c/0x2a30 kernel/exit.c:793
do_group_exit+0xd2/0x2f0 kernel/exit.c:935
__do_sys_exit_group kernel/exit.c:946 [inline]
__se_sys_exit_group kernel/exit.c:944 [inline]
__x64_sys_exit_group+0x3a/0x50 kernel/exit.c:944
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Memory state around the buggy address:
ffff8880985c4a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880985c4a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>
ffff8880985c4b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880985c4b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880985c4c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes:
470502de5bdb ("net: sched: unlock rules update API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220131172018.3704490-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 31 Jan 2022 21:17:30 +0000 (13:17 -0800)]
ethernet: smc911x: fix indentation in get/set EEPROM
Build bot produced a smatch indentation warning,
the code looks correct but it mixes spaces and tabs.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220131211730.3940875-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jean-Philippe Brucker [Tue, 1 Feb 2022 09:31:20 +0000 (09:31 +0000)]
tools: Ignore errors from `which' when searching a GCC toolchain
When cross-building tools with clang, we run `which $(CROSS_COMPILE)gcc`
to detect whether a GCC toolchain provides the standard libraries. It is
only a helper because some distros put libraries where LLVM does not
automatically find them. On other systems, LLVM detects the libc
automatically and does not need this. There, it is completely fine not
to have a GCC at all, but some versions of `which' display an error when
the command is not found:
which: no aarch64-linux-gnu-gcc in ($PATH)
Since the error can safely be ignored, throw it to /dev/null.
Fixes:
cebdb7374577 ("tools: Help cross-building with clang")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/bpf/20220201093119.1713207-1-jean-philippe@linaro.org
Linus Torvalds [Tue, 1 Feb 2022 20:39:37 +0000 (12:39 -0800)]
Merge tag 'spi-fix-v5.17-rc2' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There are quite a few fixes that have accumilated since the merge
window here, all driver specific and none super urgent, plus a new
device ID for the Rockchip driver"
* tag 'spi-fix-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: mediatek: Avoid NULL pointer crash in interrupt
spi: dt-bindings: Fix 'reg' child node schema
spi: bcm-qspi: check for valid cs before applying chip select
spi: uniphier: fix reference count leak in uniphier_spi_probe()
spi: meson-spicc: add IRQ check in meson_spicc_probe
spi: uniphier: Fix a bug that doesn't point to private data correctly
spi: change clk_disable_unprepare to clk_unprepare
spi: spi-rockchip: Add rk3568-spi compatible
spi: stm32: make SPI_MASTER_MUST_TX flags only specific to STM32F4
spi: stm32: remove inexistant variables in struct stm32_spi_cfg comment
spi: stm32-qspi: Update spi registering
Linus Torvalds [Tue, 1 Feb 2022 20:37:20 +0000 (12:37 -0800)]
Merge tag 'regulator-fix-v5.17-rc2' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of very minor fixes for the regulator framework, nothing at
all urgent here"
* tag 'regulator-fix-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: MAX20086: add gpio/consumer.h
regulator: max20086: fix error code in max20086_parse_regulators_dt()
Linus Torvalds [Tue, 1 Feb 2022 20:12:10 +0000 (12:12 -0800)]
Merge tag 'platform-drivers-x86-v5.17-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"This consists of various build- and bug-fixes as well as a few
hardware-id additions.
Highlights:
- Bunch of fixes for the new x86-android-tablets module
- Misc other fixes
- A couple of hw-id additions"
* tag 'platform-drivers-x86-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix incorrect use of platform profile on AMD platforms
platform/x86: amd-pmc: Correct usage of SMU version
platform/x86: asus-tf103c-dock: Make 2 global structs static
platform/x86: amd-pmc: Make amd_pmc_stb_debugfs_fops static
platform/x86: ISST: Fix possible circular locking dependency detected
platform/x86: intel_crystal_cove_charger: Fix IRQ masking / unmasking
platform/x86: thinkpad_acpi: Add quirk for ThinkPads without a fan
platform/x86: touchscreen_dmi: Add info for the RWC NANOTE P8 AY07J 2-in-1
platform/surface: Reinstate platform dependency
platform/x86: x86-android-tablets: Trivial typo fix for MODULE_AUTHOR
platform/x86: x86-android-tablets: Fix the buttons on CZC P10T tablet
platform/x86: x86-android-tablets: Constify the gpiod_lookup_tables arrays
platform/x86: x86-android-tablets: Add an init() callback to struct x86_dev_info
platform/x86: x86-android-tablets: Add support for disabling ACPI _AEI handlers
platform/x86: x86-android-tablets: Correct crystal_cove_charger module name
Linus Torvalds [Tue, 1 Feb 2022 19:23:02 +0000 (11:23 -0800)]
Merge tag 'ovl-fixes-5.17-rc3' of git://git./linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix a regression introduced in v5.15, affecting copy up of files with
'noatime' or 'sync' attributes to a tmpfs upper layer"
* tag 'ovl-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: don't fail copy up if no fileattr support on upper
ovl: fix NULL pointer dereference in copy up warning
Christian Brauner [Mon, 31 Jan 2022 14:48:54 +0000 (15:48 +0100)]
mailmap: update Christian Brauner's email address
At least one of the addresses will stop functioning after February.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>