linux-user: Move generic TARGET_RLIMIT* definitions to generic/target_resource.h

Signed-off-by: Serge Belyshev <belyshev@depni.sinp.msu.ru>
Message-Id: <87ee4ql3yk.fsf_-_@depni.sinp.msu.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Merge remote-tracking branch 'remotes/bsdimp/tags/bsd-user-arm-2022q1-pull-request' into staging

bsd-user: upstream signal implementation

Upstream the bsd-user fork signal implementation, for the most part.  This
series of commits represents nearly all of the infrastructure that surround
signals, except the actual system call glue (that was also reworked in the
fork and needs its own series). In addition, this adds the sigsegv and sigbus
code to arm. Even in the fork, we don't have good x86 signal implementation,
so there's little to upstream for that at the moment.

bsd-user's signal implementation is similar to linux-user's. The full context
can be found in the bsd-user's fork's 'blitz branch' at
https://github.com/qemu-bsd-user/qemu-bsd-user/tree/blitz which shows how these
are used to implement various system calls. Since this was built from
linux-user's stack stuff, evolved for BSD with the passage of a few years, it
no-doubt missed some bug fixes from linux-user (though nothing obvious stood out
in the quick comparison I made). After the first round of reviews, many of these
improvements have been incorporated.

Patchew history: https://patchew.org/QEMU/20220125012947.14974-1-imp@bsdimp.com/

# gpg: Signature made Mon 31 Jan 2022 19:55:51 GMT
# gpg:                using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg:                 aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg:                 aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg:                 aka "Warner Losh <imp@village.org>" [unknown]
# gpg:                 aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD  E1B7 6C1C D128 7DB0 1100

* remotes/bsdimp/tags/bsd-user-arm-2022q1-pull-request: (40 commits)
  bsd-user/freebsd/target_os_ucontext.h: Prefer env as arg name for CPUArchState args
  bsd-user: Rename arg name for target_cpu_reset to env
  MAINTAINERS: Add tests/vm/*bsd to the list to get reviews on
  bsd-user/signal.c: do_sigaltstack
  bsd-user/signal.c: implement do_sigaction
  bsd-user/signal.c: implement do_sigreturn
  bsd-user/signal.c: process_pending_signals
  bsd-user/signal.c: tswap_siginfo
  bsd-user/signal.c: handle_pending_signal
  bsd-user/signal.c: setup_frame
  bsd-user/signal.c: sigset manipulation routines.
  bsd-user/signal.c: Fill in queue_signal
  bsd-user/signal.c: Implement dump_core_and_abort
  bsd-user/strace.c: print_taken_signal
  bsd-user/signal.c: Implement host_signal_handler
  bsd-user/signal.c: Implement rewind_if_in_safe_syscall
  bsd-user/signal.c: host_to_target_siginfo_noswap
  bsd-user: Add trace events for bsd-user
  bsd-user: Add host signals to the build
  bsd-user/host/x86_64/host-signal.h: Implement host_signal_*
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/legoater/tags/pull-ppc-20220130' into staging

ppc 7.0 queue:

* Exception and TLB fixes for the 405 CPU (Fabiano and Cedric)
* spapr fixes (Alexey and Daniel)
* PowerNV PHB3/4 fixes (Frederic and Daniel)
* PowerNV XIVE improvements (Cedric)
* 603 CPUs fixes (Christophe)
* Book-E exception fixes (Vitaly)
* Misc compile issues  (Philippe and Fabiano)
* Exception model rework for the BookS CPUs (Fabiano)
* Exception model rework for the 74xx CPUs (Fabiano)
* Removal of 602 CPUs

# gpg: Signature made Sun 30 Jan 2022 17:42:23 GMT
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* remotes/legoater/tags/pull-ppc-20220130: (41 commits)
  target/ppc: Remove support for the PowerPC 602 CPU
  target/ppc: 74xx: Set SRRs directly in exception code
  target/ppc: 74xx: System Reset interrupt cleanup
  target/ppc: 74xx: System Call exception cleanup
  target/ppc: 74xx: Program exception cleanup
  target/ppc: 74xx: External interrupt cleanup
  target/ppc: 74xx: Machine Check exception cleanup
  target/ppc: Simplify powerpc_excp_74xx
  target/ppc: Introduce powerpc_excp_74xx
  target/ppc: books: Program exception cleanup
  target/ppc: books: External interrupt cleanup
  target/ppc: books: Machine Check exception cleanup
  target/ppc: Simplify powerpc_excp_books
  target/ppc: Introduce powerpc_excp_books
  target/ppc: 405: Watchdog timer exception cleanup
  target/ppc: 405: Program exception cleanup
  target/ppc: 405: Instruction storage interrupt cleanup
  target/ppc: 405: Data Storage exception cleanup
  target/ppc: 405: Debug exception cleanup
  target/ppc: 405: Alignment exception cleanup
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

bsd-user/freebsd/target_os_ucontext.h: Prefer env as arg name for CPUArchState args

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user: Rename arg name for target_cpu_reset to env

Rename the parameter name for target_cpu_reset's CPUArchState * arg from
cpu to env.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

MAINTAINERS: Add tests/vm/*bsd to the list to get reviews on

tests/vm/*bsd (especailly tests/vm/freebsd) are adjacent to the bsd-user
stuff and we're keen on keeping them working as well.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal.c: do_sigaltstack

Implement the meat of the sigaltstack(2) system call with do_sigaltstack.

With that, all the stubbed out routines are complete, so remove
now-incorrect comment.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal.c: implement do_sigaction

Implement the meat of the sigaction(2) system call with do_sigaction and
helper routiner block_signals (which is also used to implemement signal
masking so it's global).

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal.c: implement do_sigreturn

Implements the meat of a sigreturn(2) system call via do_sigreturn, and
helper reset_signal_mask. Fix the prototype of do_sigreturn in qemu.h
and remove do_rt_sigreturn since it's linux only.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2022-01-28' into staging

nbd patches for 2022-01-28

- Hanna Reitz: regression fix for block status caching
- Philippe Mathieu-Daude: documentation formatting
- Nir Soffer: dead code removal

# gpg: Signature made Fri 28 Jan 2022 22:58:50 GMT
# gpg:                using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg:                 aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2022-01-28:
  iotests/block-status-cache: New test
  block/io: Update BSC only if want_zero is true
  qapi/block: Cosmetic change in BlockExportType schema
  nbd/server.c: Remove unused field

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/quintela-gitlab/tags/migration-20220128-pull-request' into staging

Migration Pull request (Take 2)

Hi

This time I have disabled vmstate canary patches form Dave Gilbert.

Let's see if it works.

Later, Juan.

# gpg: Signature made Fri 28 Jan 2022 18:30:25 GMT
# gpg:                using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg:                 aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* remotes/quintela-gitlab/tags/migration-20220128-pull-request: (36 commits)
  migration: Move temp page setup and cleanup into separate functions
  migration: Simplify unqueue_page()
  migration: Add postcopy_has_request()
  migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat
  migration: No off-by-one for pss->page update in host page size
  migration: Tally pre-copy, downtime and post-copy bytes independently
  migration: Introduce ram_transferred_add()
  migration: Don't return for postcopy_send_discard_bm_ram()
  migration: Drop return code for disgard ram process
  migration: Do chunk page in postcopy_each_ram_send_discard()
  migration: Drop postcopy_chunk_hostpages()
  migration: Don't return for postcopy_chunk_hostpages()
  migration: Drop dead code of ram_debug_dump_bitmap()
  migration/ram: clean up unused comment.
  migration: Report the error returned when save_live_iterate fails
  migration/migration.c: Remove the MIGRATION_STATUS_ACTIVE when migration finished
  migration/migration.c: Avoid COLO boot in postcopy migration
  migration/migration.c: Add missed default error handler for migration state
  Remove unnecessary minimum_version_id_old fields
  multifd: Rename pages_used to normal_pages
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

iotests/block-status-cache: New test

Add a new test to verify that want_zero=false block-status calls do not
pollute the block-status cache for want_zero=true calls.

We check want_zero=true calls and their results using `qemu-img map`
(over NBD), and want_zero=false calls also using `qemu-img map` over
NBD, but using the qemu:allocation-depth context.

(This test case cannot be integrated into nbd-qemu-allocation, because
that is a qcow2 test, and this is a raw test.)

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220118170000.49423-3-hreitz@redhat.com>
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

bsd-user/signal.c: process_pending_signals

Process the currently queued signals.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal.c: tswap_siginfo

Convert siginfo from targer to host.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal.c: handle_pending_signal

Handle a queued signal.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal.c: setup_frame

setup_frame sets up a signalled stack frame. Associated routines to
extract the pointer to the stack frame and to support alternate stacks.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal.c: sigset manipulation routines.

target_sigemptyset: resets a set to having no bits set
target_sigaddset:   adds a signal to a set
target_sigismember: returns true when signal is a member
host_to_target_sigset_internal: convert host sigset to target
host_to_target_sigset: convert host sigset to target
target_to_host_sigset_internal: convert target sigset to host
target_to_host_sigset: convert target sigset to host

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal.c: Fill in queue_signal

Fill in queue signal implementation, as well as routines allocate and
delete elements of the signal queue.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal.c: Implement dump_core_and_abort

Force delivering a signal and generating a core file. It's a global
function for the moment...

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/strace.c: print_taken_signal

print_taken_signal() prints signals when we're tracing signals.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal.c: Implement host_signal_handler

Implement host_signal_handler to handle signals generated by the host
and to do safe system calls.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal.c: Implement rewind_if_in_safe_syscall

Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal.c: host_to_target_siginfo_noswap

Implement conversion of host to target siginfo.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user: Add trace events for bsd-user

Add the bsd-user specific events and infrastructure. Only include the
linux-user trace events for linux-user, not bsd-user.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user: Add host signals to the build

Start to add the host signal functionality to the build.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

block/io: Update BSC only if want_zero is true

We update the block-status cache whenever we get new information from a
bdrv_co_block_status() call to the block driver.  However, if we have
passed want_zero=false to that call, it may flag areas containing zeroes
as data, and so we would update the block-status cache with wrong
information.

Therefore, we should not update the cache with want_zero=false.

Reported-by: Nir Soffer <nsoffer@redhat.com>
Fixes: 0bc329fbb00 ("block: block-status cache for data regions")
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220118170000.49423-2-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

bsd-user/host/x86_64/host-signal.h: Implement host_signal_*

Implement host_signal_pc, host_signal_set_pc and host_signal_write for
x86_64.

Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/host/i386/host-signal.h: Implement host_signal_*

Implement host_signal_pc, host_signal_set_pc and host_signal_write for
i386.

Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/host/arm/host-signal.h: Implement host_signal_*

Implement host_signal_pc, host_signal_set_pc and host_signal_write for
arm.

Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal.c: Add si_type argument to queue_signal

Mirror the linux-user practice and add a si_type argument to queue
signal. This will be transported as the upper 8 bits in the si_type
element of siginfo so that we know what bits of the structure are valid
and so we can properly implement host_to_target_siginfo_noswap and
tswap_siginfo. Adapt the one caller of queue_signal to the new
interface.  Use all the same names as Linux (except _RT which we don't
treat differently, unlike Linux), though some are unused. Place this
into signal-common.h since that's a better place given bsd-user's
structure. Move prototype of queue_signal to signal-common.h to mirror
linux-user's location.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal.c: Implement signal_init()

Initialize the signal state for the emulator. Setup a set of sane
default signal handlers, mirroring the host's signals. For fatal signals
(those that exit by default), establish our own set of signal
handlers. Stub out the actual signal handler we use for the moment.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> XXX SIGPROF PENDING

bsd-user/signal.c: implement abstract target / host signal translation

Implement host_to_target_signal and target_to_host_signal.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_cpu.h: Implement data faults

Update for the richer set of data faults that are now possible. Copied
largely from linux-user/arm/cpu_loop.c, with minor typo fixes.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_cpu.h: Use force_sig_fault for EXCP_UDEF

Use force_sig_fault to implement unknown opcode. This just uninlines
that function, so simplify things by using it. Fold in EXCP_NOCP and
EXCP_INVSTATE, as is done in linux-user. Make a note about slight
differences with FreeBSD in case any of them turn out to be important
later.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_cpu.h: Correct code pointer

The code has moved in FreeBSD since the emulator was started, update the
comment to reflect that change.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/arget_arch_cpu.h: Move EXCP_DEBUG and EXCP_BKPT together

Implement EXCP_DEBUG and EXCP_BKPT the same, as is done in
linux-user. The prior adjustment of register 15 isn't needed, so remove
that. Remove a redunant comment (that code in FreeBSD never handled
break points). It's unclear why BKPT was an alias for system calls,
but FreeBSD doesn't do that today.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal.c: implement cpu_loop_exit_sigbus

First attempt at implementing cpu_loop_exit_sigbus, mostly copied from
linux-user version of this function.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal.c: Implement cpu_loop_exit_sigsegv

First attempt at implementing cpu_loop_exit_sigsegv, mostly copied from
linux-user version of this function.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal-common.h: Move signal functions prototypes to here

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/signal.c: implement force_sig_fault

Start to implement the force_sig_fault code. This currently just calls
queue_signal(). The bsd-user fork version of that will handle this the
synchronous nature of this call. Add signal-common.h to hold signal
helper functions like force_sig_fault.

Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/target_arch_cpu.h: Move EXCP_ATOMIC to match linux-user

Move the EXCP_ATOMIC case to match linux-user/arm/cpu_loop.c:cpu_loop
ordering.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user: Bring in docs from linux-user for signal_pending

This is currently unused, so no code adjustments are needed.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user: Remove vestiges of signal queueing code

bsd-user was copied from linux-user at a time when it queued
signals. Remove those vestiges of thse code. Retain the init function,
even though it's now empty since other stuff will likely be added
there. Make it static since it's not called from outside of main.c

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/signal.c: get_mcontext should zero vfp data

FreeBSD's get_mcontext doesn't return any vfp data. Instead, it zeros
out the vfp feilds (and all the spare fields). Impelement this
behavior. We're still missing the sysarch(ARM_GET_VFPCONTEXT) syscall,
though.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user/arm/signal.c: Implement setup_sigframe_arch for arm

Fix the broken context setting for arm. FreeBSD's get_mcontext does not
fill in the vfp info. It's filled in in sigframe(). This corresponds to
the new setup_sigframe_arch which fills in mcontext, then adjusts it to
point to the vfp context in the sigframe and fills in that context as
well. Add pointer to where this code is done.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user: Create setup_sigframe_arch to setup sigframe context

Define setup_sigframe_arch whose job it is to setup the mcontext for the
sigframe. Implement for x86 to just call mcontext.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

bsd-user: Complete FreeBSD siginfo

Fill in the missing FreeBSD siginfo fields, and add some comments.

Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

qapi/block: Cosmetic change in BlockExportType schema

Fix long line introduced in commit bb01ea73110 ("qapi/block:
Restrict vhost-user-blk to CONFIG_VHOST_USER_BLK_SERVER").

Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220119121439.214821-1-f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

nbd/server.c: Remove unused field

NBDRequestData struct has unused QSIMPLEQ_ENTRY field. It seems that
this field exists since the first git commit and was never used.

Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-Id: <20220111194313.581486-1-nsoffer@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fixes: d9a73806 ("qemu-nbd: introduce NBDRequest", v1.1)
Signed-off-by: Eric Blake <eblake@redhat.com>

target/ppc: Remove support for the PowerPC 602 CPU

The 602 was derived from the PowerPC 603, for the gaming market it
seems. It was hardly used and no firmware supporting the CPU could be
found. Drop support.

Signed-off-by: Cédric Le Goater <clg@kaod.org>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220128' into staging

target-arm queue:
 * Update copyright dates to 2022
 * hw/armv7m: Fix broken VMStateDescription
 * hw/char/exynos4210_uart: Fix crash on trying to load VM state
 * rtc: Move RTC function prototypes to their own header
 * xlnx-versal-virt: Support PMC SLCR
 * xlnx-versal-virt: Support OSPI flash memory controller
 * scripts: Explain the difference between linux-headers and standard-headers
 * target/arm: Log CPU index in 'Taking exception' log
 * arm_gicv3_its: Various bugfixes and cleanups
 * arm_gicv3_its: Implement the missing MOVI and MOVALL commands
 * ast2600: Fix address mapping of second SPI controller
 * target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp

# gpg: Signature made Fri 28 Jan 2022 15:29:36 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20220128: (32 commits)
  target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp
  hw/arm: ast2600: Fix address mapping of second SPI controller
  hw/intc/arm_gicv3_its: Implement MOVI
  hw/intc/arm_gicv3_its: Implement MOVALL
  hw/intc/arm_gicv3_its: Check table bounds against correct limit
  hw/intc/arm_gicv3_its: Make GITS_BASER<n> RAZ/WI for unimplemented registers
  hw/intc/arm_gicv3_its: Provide read accessor for translation_ops
  hw/intc/arm_gicv3: Set GICR_CTLR.CES if LPIs are supported
  hw/intc/arm_gicv3_redist: Remove unnecessary zero checks
  hw/intc/arm_gicv3_its: Sort ITS command list into numeric order
  hw/intc/arm_gicv3: Honour GICD_CTLR.EnableGrp1NS for LPIs
  hw/intc/arm_gicv3_its: Don't clear GITS_CWRITER on writes to GITS_CBASER
  hw/intc/arm_gicv3_its: Don't clear GITS_CREADR when GITS_CTLR.ENABLED is set
  hw/intc/arm_gicv3: Initialise dma_as in GIC, not ITS
  hw/intc/arm_gicv3_its: Add tracepoints
  target/arm: Log CPU index in 'Taking exception' log
  scripts: Explain the difference between linux-headers and standard-headers
  MAINTAINERS: Remove myself (for raspi).
  MAINTAINERS: Add an entry for Xilinx Versal OSPI
  hw/arm/xlnx-versal-virt: Connect mt35xu01g flashes to the OSPI
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

migration: Move temp page setup and cleanup into separate functions

Temp pages will need to grow if we want to have multiple channels for postcopy,
because each channel will need its own temp page to cache huge page data.

Before doing that, cleanup the related code.  No functional change intended.

Since at it, touch up the errno handling a little bit on the setup side.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Simplify unqueue_page()

This patch simplifies unqueue_page() on both sides of it (itself, and caller).

Firstly, due to the fact that right after unqueue_page() returned true, we'll
definitely send a huge page (see ram_save_huge_page() call - it will _never_
exit before finish sending that huge page), so unqueue_page() does not need to
jump in small page size if huge page is enabled on the ramblock.  IOW, it's
destined that only the 1st 4K page will be valid, when unqueue the 2nd+ time
we'll notice the whole huge page has already been sent anyway.  Switching to
operating on huge page reduces a lot of the loops of redundant unqueue_page().

Meanwhile, drop the dirty check.  It's not helpful to call test_bit() every
time to jump over clean pages, as ram_save_host_page() has already done so,
while in a faster way (see commit ba1b7c812c ("migration/ram: Optimize
ram_save_host_page()", 2021-05-13)).  So that's not necessary too.

Drop the two tracepoints along the way - based on above analysis it's very
possible that no one is really using it..

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Add postcopy_has_request()

Add a helper to detect whether postcopy has pending request.

Since at it, cleanup the code a bit, e.g. in unqueue_page() we shouldn't need
to check it again on queue empty because we're the only one (besides cleanup
code, which should never run during this process) that will take a request off
the list, so the request list can only grow but not shrink under the hood.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat

This patch allows us to read the tid even without blocktime feature enabled.
It's useful when tracing postcopy fault thread on faulted pages to show thread
id too with the address.

Remove the comments - they're merely not helpful at all.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: No off-by-one for pss->page update in host page size

We used to do off-by-one fixup for pss->page when finished one host huge page
transfer.  That seems to be unnecesary at all.  Drop it.

Cc: Keqian Zhu <zhukeqian1@huawei.com>
Cc: Kunkun Jiang <jiangkunkun@huawei.com>
Cc: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Tally pre-copy, downtime and post-copy bytes independently

Provide information on the number of bytes copied in the pre-copy,
downtime and post-copy phases of migration.

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Introduce ram_transferred_add()

Replace direct manipulation of ram_counters.transferred with a
function.

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Don't return for postcopy_send_discard_bm_ram()

postcopy_send_discard_bm_ram() always return zero. Since it can't
fail, simplify and do not return anything.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Drop return code for disgard ram process

It will just never fail.  Drop those return values where they're constantly
zeros.

A tiny touch-up on the tracepoint so trace_ram_postcopy_send_discard_bitmap()
is called after the logic itself (which sounds more reasonable).

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Do chunk page in postcopy_each_ram_send_discard()

Right now we loop ramblocks for twice, the 1st time chunk the dirty bits with
huge page information; the 2nd time we send the discard ranges.  That's not
necessary - we can do them in a single loop.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Drop postcopy_chunk_hostpages()

This function calls three functions:

  - postcopy_discard_send_init(ms, block->idstr);
  - postcopy_chunk_hostpages_pass(ms, block);
  - postcopy_discard_send_finish(ms);

However only the 2nd function call is meaningful.  It's major role is to make
sure dirty bits are applied in host-page-size granule, so there will be no
partial dirty bits set for a whole host page if huge pages are used.

The 1st/3rd call are for latter when we want to send the disgard ranges.
They're mostly no-op here besides some tracepoints (which are misleading!).

Drop them, then we can directly drop postcopy_chunk_hostpages() as a whole
because we can call postcopy_chunk_hostpages_pass() directly.

There're still some nice comments above postcopy_chunk_hostpages() that explain
what it does.  Copy it over to the caller's site.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Don't return for postcopy_chunk_hostpages()

It always return zero, because it just can't go wrong so far.  Simplify the
code with no functional change.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Drop dead code of ram_debug_dump_bitmap()

I planned to add "#ifdef DEBUG_POSTCOPY" around the function too because
otherwise it'll be compiled into qemu binary even if it'll never be used.  Then
I found that maybe it's easier to just drop it for good..

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration/ram: clean up unused comment.

Just a removal of an unused comment.
a0a8aa147aa did many fixes and removed the parameter named "ms", but forget to remove the corresponding comment in function named "ram_save_host_page".

Signed-off-by: Xu Zheng <xuzheng@cmss.chinamobile.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>

migration: Report the error returned when save_live_iterate fails

Should qemu_savevm_state_iterate() encounter a failure when calling a
particular save_live_iterate function, report the error code returned
by the function.

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration/migration.c: Remove the MIGRATION_STATUS_ACTIVE when migration finished

The MIGRATION_STATUS_ACTIVE indicates that migration is running.
Remove it to be handled by the default operation,
It should be part of the unknown ending states.

Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration/migration.c: Avoid COLO boot in postcopy migration

COLO dose not support postcopy migration and remove the Fixme.

Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration/migration.c: Add missed default error handler for migration state

In the migration_completion() no other status is expected, for
example MIGRATION_STATUS_CANCELLING, MIGRATION_STATUS_CANCELLED, etc.

Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Remove unnecessary minimum_version_id_old fields

The migration code will not look at a VMStateDescription's
minimum_version_id_old field unless that VMSD has set the
load_state_old field to something non-NULL.  (The purpose of
minimum_version_id_old is to specify what migration version is needed
for the code in the function pointed to by load_state_old to be able
to handle it on incoming migration.)

We have exactly one VMSD which still has a load_state_old,
in the PPC CPU; every other VMSD which sets minimum_version_id_old
is doing so unnecessarily. Delete all the unnecessary ones.

Commit created with:
  sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old')
with the one legitimate use then hand-edited back in.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---

It missed vmstate_ppc_cpu.

multifd: Rename pages_used to normal_pages

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

multifd: recv side only needs the RAMBlock host address

So we can remove the MultiFDPages.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

multifd: Use normal pages array on the recv side

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---

Rename num_normal_pages to total_normal_pages (peter)

multifd: Use normal pages array on the send side

We are only sending normal pages through multifd channels.
Later on this series, we are going to also send zero pages.
We are going to detect if a page is zero or non zero in the multifd
channel thread, not on the main thread.

So we receive an array of pages page->offset[N]

And we will end with:

p->normal[N - zero_pages]
p->zero[zero_pages].

In this patch, we just copy all the pages in offset to normal.

for (i = 0; i < pages->num; i++) {
    p->narmal[p->normal_num] = pages->offset[i];
    p->normal_num++:
}

Later in the series this becomes:

for (i = 0; i < pages->num; i++) {
    if (buffer_is_zero(page->offset[i])) {
        p->zerol[p->zero_num] = pages->offset[i];
        p->zero_num++:
    } else {
        p->narmal[p->normal_num] = pages->offset[i];
        p->normal_num++:
    }
}

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---

Improving comment (dave)
Renaming num_normal_pages to total_normal_pages (peter)

multifd: Unfold "used" variable by its value

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

multifd: Use a single writev on the send side

Until now, we wrote the packet header with write(), and the rest of the
pages with writev().  Just increase the size of the iovec and do a
single writev().

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

multifd: Remove send_write() method

Everything use now iov's.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

multifd: Make zstd use iov's

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

multifd: Make zlib use iov's

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

multifd: Move iov from pages to params

This will allow us to reduce the number of system calls on the next patch.

Signed-off-by: Juan Quintela <quintela@redhat.com>

multifd: Use proper maximum compression values

It happens that there are functions to calculate the worst possible
compression size for a packet.  Use them.

Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Move ram_release_pages() call to save_zero_page_to_file()

We always need to call it when we find a zero page, so put it in a
single place.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

migration: simplify do_compress_ram_page

The goto is not needed at all.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: Remove masking for compression

Remove the mask in the call to ram_release_pages().  Nothing else does
it, and if the offset has that bits set, we have a lot of trouble.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

migration: ram_release_pages() always receive 1 page as argument

Remove the pages argument. And s/pages/page/

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
---

- Use 1LL instead of casts (philmd)
- Change the whole 1ULL for TARGET_PAGE_SIZE

migration: We only need last_stage in two places

We only need last_stage in two places and we are passing it all
around.  Just add a field to RAMState that passes it.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
---

Repeat subject (philmd suggestion)

migration: All this fields are unsigned

So printing it as %d is wrong.  Notice that for the channel id, that
is an uint8_t, but I changed it anyways for consistency.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp

The exception caused by an SVC instruction may be taken to AArch32
Hyp mode for two reasons:
 * HCR.TGE indicates that exceptions from EL0 should trap to EL2
 * we were already in Hyp mode

The entrypoint in the vector table to be used differs in these two
cases: for an exception routed to Hyp mode from EL0, we enter at the
common 0x14 "hyp trap" entrypoint.  For SVC from Hyp mode to Hyp
mode, we enter at the 0x08 (svc/hvc trap) entrypoint.
In the v8A Arm ARM pseudocode this is done in AArch32.TakeSVCException.

QEMU incorrectly routed both of these exceptions to the 0x14
entrypoint.  Correct the entrypoint for SVC from Hyp to Hyp by making
use of the existing logic which handles "normal entrypoint for
Hyp-to-Hyp, otherwise 0x14" for traps like UNDEF and data/prefetch
aborts (reproduced here since it's outside the visible context
in the diff for this commit):

    if (arm_current_el(env) != 2 && addr < 0x14) {
        addr = 0x14;
    }

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220117131953.3936137-1-peter.maydell@linaro.org

hw/arm: ast2600: Fix address mapping of second SPI controller

Address should be 0x1E631000 and not 0x1E641000 as initially introduced.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/838
Fixes: f25c0ae1079d ("aspeed/soc: Add AST2600 support")
Suggested-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220126083520.4135713-1-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/intc/arm_gicv3_its: Implement MOVI

Implement the ITS MOVI command. This command specifies a (physical) LPI
by DeviceID and EventID and provides a new ICID for it. The ITS must
find the interrupt translation table entry for the LPI, which will
tell it the old ICID. It then moves the pending state of the LPI from
the old redistributor to the new one and updates the ICID field in
the translation table entry.

This is another GICv3 ITS command that we forgot to implement.  Linux
does use this one, but only if the guest powers off one of its CPUs.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-15-peter.maydell@linaro.org

hw/intc/arm_gicv3_its: Implement MOVALL

Implement the ITS MOVALL command, which takes all the pending
interrupts on a source redistributor and makes the not-pending on
that source redistributor and pending on a destination redistributor.

This is a GICv3 ITS command which we forgot to implement. (It is
not used by Linux guests.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-14-peter.maydell@linaro.org

hw/intc/arm_gicv3_its: Check table bounds against correct limit

Currently when we fill in a TableDesc based on the value the guest
has written to the GITS_BASER<n> register, we calculate both:
 * num_entries : the number of entries in the table, constrained
   by the amount of memory the guest has given it
 * num_ids : the number of IDs we support for this table,
   constrained by the implementation choices and the architecture
   (eg DeviceIDs are 16 bits, so num_ids is 1 << 16)

When validating ITS commands, however, we check only num_ids,
thus allowing a broken guest to specify table entries that
index off the end of it. This will only corrupt guest memory,
but the ITS is supposed to reject such commands as invalid.

Instead of calculating both num_entries and num_ids, set
num_entries to the minimum of the two limits, and check that.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-13-peter.maydell@linaro.org

hw/intc/arm_gicv3_its: Make GITS_BASER<n> RAZ/WI for unimplemented registers

The ITS has a bank of 8 GITS_BASER<n> registers, which allow the
guest to specify the base address of various data tables.  Each
register has a read-only type field indicating which table it is for
and a read-write field where the guest can write in the base address
(among other things).  We currently allow the guest to write the
writeable fields for all eight registers, even if the type field is 0
indicating "Unimplemented".  This means the guest can provoke QEMU
into asserting by writing an address into one of these unimplemented
base registers, which bypasses the "if (!value) continue" check in
extract_table_params() and lets us hit the assertion that the type
field is one of the permitted table types.

Prevent the assertion by not allowing the guest to write to the
unimplemented base registers. This means their value will remain 0
and extract_table_params() will ignore them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-12-peter.maydell@linaro.org

hw/intc/arm_gicv3_its: Provide read accessor for translation_ops

The MemoryRegionOps gicv3_its_translation_ops currently provides only
a .write_with_attrs function, because the only register in this
region is the write-only GITS_TRANSLATER.  However, if you don't
provide a read function and the guest tries reading from this memory
region, QEMU will crash because
memory_region_read_with_attrs_accessor() calls a NULL pointer.

Add a read function which always returns 0, to cover both bogus
attempts to read GITS_TRANSLATER and also reads from the rest of the
region, which is documented to be reserved, RES0.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-11-peter.maydell@linaro.org

hw/intc/arm_gicv3: Set GICR_CTLR.CES if LPIs are supported

The GICR_CTLR.CES bit is a read-only bit which is set to 1 to indicate
that the GICR_CTLR.EnableLPIs bit can be written to 0 to disable
LPIs (as opposed to allowing LPIs to be enabled but not subsequently
disabled). Our implementation permits this, so advertise it
by setting CES to 1.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-10-peter.maydell@linaro.org

hw/intc/arm_gicv3_redist: Remove unnecessary zero checks

The ITS-related parts of the redistributor code make some checks for
whether registers like GICR_PROPBASER and GICR_PENDBASER are zero.
There is no requirement in the specification for treating zeroes in
these address registers specially -- they contain guest physical
addresses and it is entirely valid (if unusual) for the guest to
choose to put the tables they address at guest physical address zero.
We use these values only to calculate guest addresses, and attempts
by the guest to use a bad address will be handled by the
address_space_* functions which we use to do the loads and stores.

Remove the unnecessary checks.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-9-peter.maydell@linaro.org

hw/intc/arm_gicv3_its: Sort ITS command list into numeric order

The list of #defines for the ITS command packet numbers is neither
in alphabetical nor numeric order. Sort it into numeric order.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-8-peter.maydell@linaro.org

hw/intc/arm_gicv3: Honour GICD_CTLR.EnableGrp1NS for LPIs

The GICD_CTLR distributor register has enable bits which control
whether the different interrupt groups (Group 0, Non-secure Group 1
and Secure Group 1) are forwarded to the CPU.  We get this right for
traditional interrupts, but forgot to account for it when adding
LPIs.  LPIs are always Group 1 NS and if the EnableGrp1NS bit is not
set we must not forward them to the CPU.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-7-peter.maydell@linaro.org

hw/intc/arm_gicv3_its: Don't clear GITS_CWRITER on writes to GITS_CBASER

The ITS specification says that when the guest writes to GITS_CBASER
this causes GITS_CREADR to be cleared.  However it does not have an
equivalent clause for GITS_CWRITER.  (This is because GITS_CREADR is
read-only, but GITS_CWRITER is writable and the guest can initialize
it.) Remove the code that clears GITS_CWRITER on GITS_CBASER writes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-6-peter.maydell@linaro.org

hw/intc/arm_gicv3_its: Don't clear GITS_CREADR when GITS_CTLR.ENABLED is set

The current ITS code clears GITS_CREADR when GITS_CTLR.ENABLED is set.
This is not correct -- guest code can validly clear ENABLED and then
set it again and expect the ITS to continue processing where it left
off. Remove the erroneous assignment.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-5-peter.maydell@linaro.org