OSDN Git Service
zhenwei pi [Fri, 13 May 2022 03:23:09 +0000 (20:23 -0700)]
mm/memory-failure.c: simplify num_poisoned_pages_dec
Don't decrease the number of poisoned pages in page_alloc.c, let the
memory-failure.c do inc/dec poisoned pages only.
Also simplify unpoison_memory(), only decrease the number of
poisoned pages when:
- TestClearPageHWPoison() succeed
- put_page_back_buddy succeed
After decreasing, print necessary log.
Finally, remove clear_page_hwpoison() and unpoison_taken_off_page().
Link: https://lkml.kernel.org/r/20220509105641.491313-3-pizhenwei@bytedance.com
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
zhenwei pi [Fri, 13 May 2022 03:23:09 +0000 (20:23 -0700)]
mm/memory-failure.c: move clear_hwpoisoned_pages
Patch series "memory-failure: fix hwpoison_filter", v2.
As well known, the memory failure mechanism handles memory corrupted
event, and try to send SIGBUS to the user process which uses this
corrupted page.
For the virtualization case, QEMU catches SIGBUS and tries to inject MCE
into the guest, and the guest handles memory failure again. Thus the
guest gets the minimal effect from hardware memory corruption.
The further step I'm working on:
1, try to modify code to decrease poisoned pages in a single place
(mm/memofy-failure.c: simplify num_poisoned_pages_dec in this series).
2, try to use page_handle_poison() to handle SetPageHWPoison() and
num_poisoned_pages_inc() together. It would be best to call
num_poisoned_pages_inc() in a single place too.
3, introduce memory failure notifier list in memory-failure.c: notify
the corrupted PFN to someone who registers this list. If I can
complete [1] and [2] part, [3] will be quite easy(just call notifier
list after increasing poisoned page).
4, introduce memory recover VQ for memory balloon device, and registers
memory failure notifier list. During the guest kernel handles memory
failure, balloon device gets notified by memory failure notifier list,
and tells the host to recover the corrupted PFN(GPA) by the new VQ.
5, host side remaps the corrupted page(HVA), and tells the guest side
to unpoison the PFN(GPA). Then the guest fixes the corrupted page(GPA)
dynamically.
This patch (of 5):
clear_hwpoisoned_pages() clears HWPoison flag and decreases the number of
poisoned pages, this actually works as part of memory failure.
Move this function from sparse.c to memory-failure.c, finally there is no
CONFIG_MEMORY_FAILURE in sparse.c.
Link: https://lkml.kernel.org/r/20220509105641.491313-1-pizhenwei@bytedance.com
Link: https://lkml.kernel.org/r/20220509105641.491313-2-pizhenwei@bytedance.com
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Eric Dumazet [Fri, 13 May 2022 03:23:09 +0000 (20:23 -0700)]
mm/page_owner: use strscpy() instead of strlcpy()
current->comm[] is not a string (no guarantee for a zero byte in it).
strlcpy(s1, s2, l) is calling strlen(s2), potentially
causing out-of-bound access, as reported by syzbot:
detected buffer overflow in __fortify_strlen
------------[ cut here ]------------
kernel BUG at lib/string_helpers.c:980!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 4087 Comm: dhcpcd-run-hooks Not tainted
5.18.0-rc3-syzkaller-01537-g20b87e7c29df #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:fortify_panic+0x18/0x1a lib/string_helpers.c:980
Code: 8c e8 c5 ba e1 fa e9 23 0f bf fa e8 0b 5d 8c f8 eb db 55 48 89 fd e8 e0 49 40 f8 48 89 ee 48 c7 c7 80 f5 26 8a e8 99 09 f1 ff <0f> 0b e8 ca 49 40 f8 48 8b 54 24 18 4c 89 f1 48 c7 c7 00 00 27 8a
RSP: 0018:
ffffc900000074a8 EFLAGS:
00010286
RAX:
000000000000002c RBX:
ffff88801226b728 RCX:
0000000000000000
RDX:
ffff8880198e0000 RSI:
ffffffff81600458 RDI:
fffff52000000e87
RBP:
ffffffff89da2aa0 R08:
000000000000002c R09:
0000000000000000
R10:
ffffffff815fae2e R11:
0000000000000000 R12:
ffff88801226b700
R13:
ffff8880198e0830 R14:
0000000000000000 R15:
0000000000000000
FS:
0000000000000000(0000) GS:
ffff8880b9c00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f5876ad6ff8 CR3:
000000001a48c000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000600
Call Trace:
<IRQ>
__fortify_strlen include/linux/fortify-string.h:128 [inline]
strlcpy include/linux/fortify-string.h:143 [inline]
__set_page_owner_handle+0x2b1/0x3e0 mm/page_owner.c:171
__set_page_owner+0x3e/0x50 mm/page_owner.c:190
prep_new_page mm/page_alloc.c:2441 [inline]
get_page_from_freelist+0xba2/0x3e00 mm/page_alloc.c:4182
__alloc_pages+0x1b2/0x500 mm/page_alloc.c:5408
alloc_pages+0x1aa/0x310 mm/mempolicy.c:2272
alloc_slab_page mm/slub.c:1799 [inline]
allocate_slab+0x26c/0x3c0 mm/slub.c:1944
new_slab mm/slub.c:2004 [inline]
___slab_alloc+0x8df/0xf20 mm/slub.c:3005
__slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3092
slab_alloc_node mm/slub.c:3183 [inline]
slab_alloc mm/slub.c:3225 [inline]
__kmem_cache_alloc_lru mm/slub.c:3232 [inline]
kmem_cache_alloc+0x360/0x3b0 mm/slub.c:3242
dst_alloc+0x146/0x1f0 net/core/dst.c:92
Link: https://lkml.kernel.org/r/20220509145949.265184-1-eric.dumazet@gmail.com
Fixes:
865ed6a32786 ("mm/page_owner: record task command name")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrey Konovalov [Fri, 13 May 2022 03:23:09 +0000 (20:23 -0700)]
kasan: clean-up kconfig options descriptions
Various readability clean-ups of KASAN Kconfig options.
No functional changes.
Link: https://lkml.kernel.org/r/c160840dd9e4b1ad5529ecfdb0bba35d9a14d826.1652203271.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/47afaecec29221347bee49f58c258ac1ced3b429.1652123204.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrey Konovalov [Fri, 13 May 2022 03:23:09 +0000 (20:23 -0700)]
kasan: move boot parameters section in documentation
Move the "Boot parameters" section in KASAN documentation next to the
section that describes KASAN build options.
No content changes.
Link: https://lkml.kernel.org/r/870628e1293b4f44edf7cbcb92374ff9eb7503d7.1652203271.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/ec9c923f35e7c5312836c4624a7f317dc1ee2c1c.1652123204.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrey Konovalov [Fri, 13 May 2022 03:23:09 +0000 (20:23 -0700)]
kasan: update documentation
Do assorted clean-ups and improvements to KASAN documentation, including:
- Describe each mode in a dedicated paragraph.
- Split out a Support section that describes in details which compilers,
architectures and memory types each mode requires/supports.
- Capitalize the first letter in the names of each KASAN mode.
[andreyknvl@google.com: rewording, per Marco]
Link: https://lkml.kernel.org/r/896b2d914d6b50d677fd7b38f76967cc705c01ba.1652203271.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/5bd58ebebf066593ce0e1d265d60278b5f5a1874.1652123204.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrey Konovalov [Fri, 13 May 2022 03:23:08 +0000 (20:23 -0700)]
kasan: give better names to shadow values
Rename KASAN_KMALLOC_* shadow values to KASAN_SLAB_*, as they are used for
all slab allocations, not only for kmalloc.
Also rename KASAN_FREE_PAGE to KASAN_PAGE_FREE to be consistent with
KASAN_PAGE_REDZONE and KASAN_SLAB_FREE.
Link: https://lkml.kernel.org/r/bebcaf4eafdb0cabae0401a69c0af956aa87fcaa.1652111464.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrey Konovalov [Fri, 13 May 2022 03:23:08 +0000 (20:23 -0700)]
kasan: use tabs to align shadow values
Consistently use tabs instead of spaces to shadow value definitions.
Link: https://lkml.kernel.org/r/00e7e66b5fc375d58200dc1489949b3edcd096b7.1652111464.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrey Konovalov [Fri, 13 May 2022 03:23:08 +0000 (20:23 -0700)]
kasan: clean up comments in internal kasan.h
Clean up comments in mm/kasan/kasan.h: clarify, unify styles, fix
punctuation, etc.
Link: https://lkml.kernel.org/r/a0680ff30035b56cb7bdd5f59fd400e71712ceb5.1652111464.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sebastian Andrzej Siewior [Fri, 13 May 2022 03:23:08 +0000 (20:23 -0700)]
mm/vmalloc: use raw_cpu_ptr() for vmap_block_queue access
The per-CPU resource vmap_block_queue is accessed via get_cpu_var(). That
macro disables preemption and then loads the pointer from the current CPU.
This doesn't work on PREEMPT_RT because a spinlock_t is later accessed
within the preempt-disable section.
There is no need to disable preemption while accessing the per-CPU struct
vmap_block_queue because the list is protected with a spinlock_t. The
per-CPU struct is also accessed cross-CPU in purge_fragmented_blocks().
It is possible that by using raw_cpu_ptr() the code migrates to another
CPU and uses struct from another CPU. This is fine because the list is
locked and the locked section is very short.
Use raw_cpu_ptr() to access vmap_block_queue.
Link: https://lkml.kernel.org/r/YnKx3duAB53P7ojN@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vasily Averin [Fri, 13 May 2022 03:23:08 +0000 (20:23 -0700)]
tracing: incorrect gfp_t conversion
Fixes the following sparse warnings:
include/trace/events/*: sparse: cast to restricted gfp_t
include/trace/events/*: sparse: restricted gfp_t degrades to integer
gfp_t type is bitwise and requires __force attributes for any casts.
Link: https://lkml.kernel.org/r/331d88fe-f4f7-657c-02a2-d977f15fbff6@openvz.org
Signed-off-by: Vasily Averin <vvs@openvz.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alexey Romanov [Fri, 13 May 2022 03:23:07 +0000 (20:23 -0700)]
zram: remove double compression logic
The 2nd trial allocation under per-cpu presumption has been used to
prevent regression of allocation failure. However, it makes trouble for
maintenance without significant benefit. The slowpath branch is executed
extremely rarely: getting there is problematic. Therefore, we delete this
branch.
Since
b09ab054b69b ("zram: support BDI_CAP_STABLE_WRITES"), zram has used
QUEUE_FLAG_STABLE_WRITES to prevent buffer change between 1st and 2nd
memory allocations. Since we remove second trial memory allocation logic,
we could remove the STABLE_WRITES flag because there is no change buffer
to be modified under us.
Link: https://lkml.kernel.org/r/20220505094443.11728-1-avromanov@sberdevices.ru
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vasily Averin [Fri, 13 May 2022 03:23:07 +0000 (20:23 -0700)]
percpu: improve percpu_alloc_percpu event trace
Add call_site, bytes_alloc and gfp_flags fields to the output of the
percpu_alloc_percpu ftrace event:
mkdir-4393 [001] 169.334788: percpu_alloc_percpu:
call_site=mem_cgroup_css_alloc+0xa6 reserved=0 is_atomic=0 size=2408 align=8
base_addr=0xffffc7117fc00000 off=402176 ptr=0x3dc867a62300 bytes_alloc=14448
gfp_flags=GFP_KERNEL_ACCOUNT
This is required to track memcg-accounted percpu allocations.
Link: https://lkml.kernel.org/r/a07be858-c8a3-7851-9086-e3262cbcf707@openvz.org
Signed-off-by: Vasily Averin <vvs@openvz.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Akira Yokosawa [Fri, 13 May 2022 03:23:07 +0000 (20:23 -0700)]
docs: vm/page_owner: tweak literal block in STANDARD FORMAT SPECIFIERS
A semantic conflict between commit
5603f9bdea68 ("docs: vm/page_owner: use
literal blocks for param description") and a change queued for v5.19
authored by Jiajian Ye ("tools/vm/page_owner_sort.c: support sorting
blocks by multiple keys") results in a warning from "make htmldocs"
saying:
[...]/vm/page_owner.rst:176: WARNING: Literal block expected; none found.
This is because a literal block in ReST ends at a line which has the same
indent as the paragraph preceding it. In this case the one with no
indent.
Indent the two "For --xxxx option:" lines by two columns and make the
whole section a literal block.
While at it, fix indents by white spaces of "ator" keys.
Link: https://lkml.kernel.org/r/fdfecc82-d41e-6d8a-738d-4beb6faa27fb@gmail.com
Signed-of-by: Akira Yokosawa <akiyks@gmail.com>
Reported-by: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Cc: Haowen Bai <baihaowen@meizu.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jiapeng Chong [Fri, 13 May 2022 03:23:07 +0000 (20:23 -0700)]
mm/damon/reclaim: use resource_size function on resource object
Fix the following coccicheck warnings:
./mm/damon/reclaim.c:241:30-33: WARNING: Suspicious code. resource_size is maybe missing with res.
Link: https://lkml.kernel.org/r/20220507032512.129598-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: "Boehme, Markus" <markubo@amazon.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Li kunyu [Fri, 13 May 2022 03:23:07 +0000 (20:23 -0700)]
mm: functions may simplify the use of return values
p4d_clear_huge may be optimized for void return type and function usage.
vunmap_p4d_range function saves a few steps here.
Link: https://lkml.kernel.org/r/20220507150630.90399-1-kunyu@nfschina.com
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tong Tiangen [Fri, 13 May 2022 03:23:06 +0000 (20:23 -0700)]
riscv/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK
As commit
d283d422c6c4 ("x86: mm: add x86_64 support for page table
check"), enable ARCH_SUPPORTS_PAGE_TABLE_CHECK on riscv.
Add additional page table check stubs for page table helpers, these stubs
can be used to check the existing page table entries.
Link: https://lkml.kernel.org/r/20220507110114.4128854-7-tongtiangen@huawei.com
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kefeng Wang [Fri, 13 May 2022 03:23:06 +0000 (20:23 -0700)]
arm64/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK
As commit
d283d422c6c4 ("x86: mm: add x86_64 support for page table
check") , enable ARCH_SUPPORTS_PAGE_TABLE_CHECK on arm64.
Add additional page table check stubs for page table helpers, these stubs
can be used to check the existing page table entries.
Link: https://lkml.kernel.org/r/20220507110114.4128854-6-tongtiangen@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tong Tiangen [Fri, 13 May 2022 03:23:06 +0000 (20:23 -0700)]
mm: remove __HAVE_ARCH_PTEP_CLEAR in pgtable.h
Currently, there is no architecture definition __HAVE_ARCH_PTEP_CLEAR,
Generic ptep_clear() is the only definition for all architecture, So drop
the "#ifndef __HAVE_ARCH_PTEP_CLEAR".
Link: https://lkml.kernel.org/r/20220507110114.4128854-5-tongtiangen@huawei.com
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Suggested-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tong Tiangen [Fri, 13 May 2022 03:23:06 +0000 (20:23 -0700)]
mm: page_table_check: add hooks to public helpers
Move ptep_clear() to the include/linux/pgtable.h and add page table check
relate hooks to some helpers, it's prepare for support page table check
feature on new architecture.
Optimize the implementation of ptep_clear(), page table hooks added page
table check stubs, the interface control should be at stubs, there is no
rationale for doing a IS_ENABLED() check here.
For architectures that do not enable CONFIG_PAGE_TABLE_CHECK, they will
call a fallback page table check stubs[1] when getting their page table
helpers[2] in include/linux/pgtable.h.
[1] page table check stubs defined in include/linux/page_table_check.h
[2] ptep_clear() ptep_get_and_clear() pmdp_huge_get_and_clear()
pudp_huge_get_and_clear()
Link: https://lkml.kernel.org/r/20220507110114.4128854-4-tongtiangen@huawei.com
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kefeng Wang [Fri, 13 May 2022 03:23:06 +0000 (20:23 -0700)]
mm: page_table_check: move pxx_user_accessible_page into x86
The pxx_user_accessible_page() checks the PTE bit, it's
architecture-specific code, move them into x86's pgtable.h.
These helpers are being moved out to make the page table check framework
platform independent.
Link: https://lkml.kernel.org/r/20220507110114.4128854-3-tongtiangen@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tong Tiangen [Fri, 13 May 2022 03:23:06 +0000 (20:23 -0700)]
mm: page_table_check: using PxD_SIZE instead of PxD_PAGE_SIZE
Patch series "mm: page_table_check: add support on arm64 and riscv", v7.
Page table check performs extra verifications at the time when new pages
become accessible from the userspace by getting their page table entries
(PTEs PMDs etc.) added into the table. It is supported on X86[1].
This patchset made some simple changes and make it easier to support new
architecture, then we support this feature on ARM64 and RISCV.
[1]https://lore.kernel.org/lkml/
20211123214814.
3756047-1-pasha.tatashin@soleen.com/
This patch (of 6):
Compared with PxD_PAGE_SIZE, which is defined and used only on X86,
PxD_SIZE is more common in each architecture. Therefore, it is more
reasonable to use PxD_SIZE instead of PxD_PAGE_SIZE in page_table_check.c.
At the same time, it is easier to support page table check in other
architectures. The substitution has no functional impact on the x86.
Link: https://lkml.kernel.org/r/20220507110114.4128854-1-tongtiangen@huawei.com
Link: https://lkml.kernel.org/r/20220507110114.4128854-2-tongtiangen@huawei.com
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Suggested-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:05 +0000 (20:23 -0700)]
mm/migrate: convert move_to_new_page() into move_to_new_folio()
Pass in the folios that we already have in each caller. Saves a
lot of calls to compound_head().
Link: https://lkml.kernel.org/r/20220504182857.4013401-27-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:05 +0000 (20:23 -0700)]
mm: add folio_test_movable()
This is the folio equivalent of PageMovable() which is needed to
convert mm/migrate.c to folios.
Link: https://lkml.kernel.org/r/20220504182857.4013401-26-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:05 +0000 (20:23 -0700)]
mm: add folio_mapping_flags()
This is the equivalent of PageMappingFlags and is needed for converting
mm/migrate.c to folios.
Link: https://lkml.kernel.org/r/20220504182857.4013401-25-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:05 +0000 (20:23 -0700)]
mm/shmem: convert shmem_swapin_page() to shmem_swapin_folio()
shmem_swapin_page() only brings in order-0 pages, which are folios
by definition.
Link: https://lkml.kernel.org/r/20220504182857.4013401-24-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:05 +0000 (20:23 -0700)]
mm/shmem: convert shmem_getpage_gfp to use a folio
Rename shmem_alloc_and_acct_page() to shmem_alloc_and_acct_folio() and
have it return a folio, then use a folio throuughout shmem_getpage_gfp().
It continues to return a struct page.
Link: https://lkml.kernel.org/r/20220504182857.4013401-23-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:04 +0000 (20:23 -0700)]
mm/shmem: convert shmem_alloc_and_acct_page to use a folio
Convert shmem_alloc_hugepage() to return the folio that it uses and use a
folio throughout shmem_alloc_and_acct_page(). Continue to return a page
from shmem_alloc_and_acct_page() for now.
Link: https://lkml.kernel.org/r/20220504182857.4013401-22-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:04 +0000 (20:23 -0700)]
mm/shmem: add shmem_alloc_folio()
Call vma_alloc_folio() directly instead of alloc_page_vma(). Add a
shmem_alloc_page() wrapper to avoid changing the callers.
Link: https://lkml.kernel.org/r/20220504182857.4013401-21-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:04 +0000 (20:23 -0700)]
mm/shmem: turn shmem_should_replace_page into shmem_should_replace_folio
This is a straightforward conversion.
Link: https://lkml.kernel.org/r/20220504182857.4013401-20-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:04 +0000 (20:23 -0700)]
mm/shmem: convert shmem_add_to_page_cache to take a folio
Shrinks shmem_add_to_page_cache() by 16 bytes. All the callers grow,
but this is temporary as they will all be converted to folios soon.
Link: https://lkml.kernel.org/r/20220504182857.4013401-19-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:04 +0000 (20:23 -0700)]
mm/swap: add folio_throttle_swaprate
The only use of the page argument to cgroup_throttle_swaprate() is to get
the node ID, and this will be the same for all pages in the folio, so just
pass in the first page of the folio.
Link: https://lkml.kernel.org/r/20220504182857.4013401-18-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:03 +0000 (20:23 -0700)]
mm/shmem: use a folio in shmem_unused_huge_shrink
When calling split_huge_page() we usually have to find the precise page,
but that's not necessary here because we only need to unlock and put the
folio afterwards. Saves 231 bytes of text (20% of this function).
Link: https://lkml.kernel.org/r/20220504182857.4013401-17-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:03 +0000 (20:23 -0700)]
vmscan: remove remaining uses of page in shrink_page_list
These are all straightforward conversions to the folio API.
Link: https://lkml.kernel.org/r/20220504182857.4013401-16-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:03 +0000 (20:23 -0700)]
mm: allow can_split_folio() to be called when THP are disabled
The call to can_split_folio() in vmscan is currently guarded by a test of
PageTransHuge() so the BUILD_BUG() is eliminated if THP are disabled. The
next patch replaces that test with folio_test_large() which may be true,
even when THP are disabled. However, if THP are disabled, we cannot
split, so an unconditional return of false is appropriate.
Link: https://lkml.kernel.org/r/20220504182857.4013401-15-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:03 +0000 (20:23 -0700)]
vmscan: convert the activate_locked portion of shrink_page_list to folios
This accounts the number of pages activated correctly for large folios.
Link: https://lkml.kernel.org/r/20220504182857.4013401-14-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:03 +0000 (20:23 -0700)]
vmscan: move initialisation of mapping down
Now that we don't interrogate the BDI for congestion, we can delay looking
up the folio's mapping until we've got further through the function,
reducing register pressure and saving a call to folio_mapping for folios
we're adding to the swap cache.
Link: https://lkml.kernel.org/r/20220504182857.4013401-13-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:03 +0000 (20:23 -0700)]
vmscan: convert lazy freeing to folios
Remove a hidden call to compound_head(), and account nr_pages instead of a
single page. This matches the code in lru_lazyfree_fn() that accounts
nr_pages to PGLAZYFREE.
Link: https://lkml.kernel.org/r/20220504182857.4013401-12-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:02 +0000 (20:23 -0700)]
vmscan: convert page buffer handling to use folios
This mostly just removes calls to compound_head() although nr_reclaimed
should be incremented by the number of pages, not just 1.
Link: https://lkml.kernel.org/r/20220504182857.4013401-11-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:02 +0000 (20:23 -0700)]
vmscan: convert dirty page handling to folios
Mostly this just eliminates calls to compound_head(), but
NR_VMSCAN_IMMEDIATE was being incremented by 1 instead of by nr_pages.
Link: https://lkml.kernel.org/r/20220504182857.4013401-10-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:02 +0000 (20:23 -0700)]
swap: convert add_to_swap() to take a folio
The only caller already has a folio available, so this saves a conversion.
Also convert the return type to boolean.
Link: https://lkml.kernel.org/r/20220504182857.4013401-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:02 +0000 (20:23 -0700)]
swap: turn get_swap_page() into folio_alloc_swap()
This removes an assumption that a large folio is HPAGE_PMD_NR pages
in size.
Link: https://lkml.kernel.org/r/20220504182857.4013401-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:02 +0000 (20:23 -0700)]
vmscan: convert the writeback handling in shrink_page_list() to folios
Slightly more efficient due to fewer calls to compound_head().
Link: https://lkml.kernel.org/r/20220504182857.4013401-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:01 +0000 (20:23 -0700)]
vmscan: use folio_mapped() in shrink_page_list()
Remove some legacy function calls.
Link: https://lkml.kernel.org/r/20220504182857.4013401-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:01 +0000 (20:23 -0700)]
mm: remove alloc_pages_vma()
All callers have now been converted to use vma_alloc_folio(), so convert
the body of alloc_pages_vma() to allocate folios instead.
Link: https://lkml.kernel.org/r/20220504182857.4013401-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:01 +0000 (20:23 -0700)]
alpha: fix alloc_zeroed_user_highpage_movable()
Due to a typo, the final argument to alloc_page_vma() didn't refer to a
real variable. This only affected CONFIG_NUMA, which was marked BROKEN in
2006 and removed from alpha in 2021. Found due to a refactoring patch.
Link: https://lkml.kernel.org/r/20220504182857.4013401-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:01 +0000 (20:23 -0700)]
mm/huge_memory: convert do_huge_pmd_anonymous_page() to use vma_alloc_folio()
Remove the use of this old API, eliminating a call to
prep_transhuge_page().
Link: https://lkml.kernel.org/r/20220504182857.4013401-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Wilcox (Oracle) [Fri, 13 May 2022 03:23:01 +0000 (20:23 -0700)]
shmem: convert shmem_alloc_hugepage() to use vma_alloc_folio()
Patch series "Folio patches for 5.19", v2.
This patch (of 26):
For now, return the head page of the folio, but remove use of the old
alloc_pages_vma() API.
Link: https://lkml.kernel.org/r/20220504182857.4013401-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20220504182857.4013401-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wan Jiabing [Fri, 13 May 2022 03:23:00 +0000 (20:23 -0700)]
mm/shmem: remove duplicate include in memory.c
Fix following checkincludes.pl warning:
mm/memory.c: linux/mm_inline.h is included more than once.
The include is in line 44. Remove the duplicated here.
Link: https://lkml.kernel.org/r/20220427064717.803019-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wei Yang [Fri, 13 May 2022 03:23:00 +0000 (20:23 -0700)]
mm/vmscan: don't use NUMA_NO_NODE as indicator of page on different node
Now we are sure there is at least one page on page_list, so it is safe to
get the nid of it. This means it is not necessary to use NUMA_NO_NODE as
an indicator for the beginning of iteration or a page on different node.
Link: https://lkml.kernel.org/r/20220429014426.29223-2-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wei Yang [Fri, 13 May 2022 03:23:00 +0000 (20:23 -0700)]
mm/vmscan: filter empty page_list at the beginning
node_page_list would always be !empty on finishing the loop, except
page_list is empty.
Let's handle empty page_list before doing any real work including touching
PF_MEMALLOC flag.
Link: https://lkml.kernel.org/r/20220429014426.29223-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Fri, 13 May 2022 03:23:00 +0000 (20:23 -0700)]
mm/vmscan: use helper folio_is_file_lru()
Use helper folio_is_file_lru() to check whether folio is file lru. Minor
readability improvement.
[linmiaohe@huawei.com: use folio_is_file_lru()]
Link: https://lkml.kernel.org/r/20220428105802.21389-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220425111232.23182-7-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Fri, 13 May 2022 03:23:00 +0000 (20:23 -0700)]
mm/vmscan: remove obsolete comment in kswapd_run
Since commit
6b700b5b3c59 ("mm/vmscan.c: remove cpu online notification
for now"), cpu online notification is removed. So kswapd won't move to
proper cpus if cpus are hot-added. Remove this obsolete comment.
Link: https://lkml.kernel.org/r/20220425111232.23182-6-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Fri, 13 May 2022 03:23:00 +0000 (20:23 -0700)]
mm/vmscan: take all base pages of THP into account when race with speculative reference
If the page has buffers, shrink_page_list will try to free the buffer
mappings associated with the page and try to free the page as well. In
the rare race with speculative reference, the page will be freed shortly
by speculative reference. But nr_reclaimed is not incremented correctly
when we come across the THP. We need to account all the base pages in
this case.
Link: https://lkml.kernel.org/r/20220425111232.23182-5-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Fri, 13 May 2022 03:22:59 +0000 (20:22 -0700)]
mm/vmscan: introduce helper function reclaim_page_list()
Introduce helper function reclaim_page_list() to eliminate the duplicated
code of doing shrink_page_list() and putback_lru_page. Also we can
separate node reclaim from node page list operation this way. No
functional change intended.
Link: https://lkml.kernel.org/r/20220425111232.23182-3-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Fri, 13 May 2022 03:22:59 +0000 (20:22 -0700)]
mm/vmscan: add a comment about MADV_FREE pages check in folio_check_dirty_writeback
Patch series "A few cleanup and fixup patches for vmscan
This series contains a few patches to remove obsolete comment, introduce
helper to remove duplicated code and so no. Also we take all base pages
of THP into account in rare race condition. More details can be found in
the respective changelogs.
This patch (of 6):
The MADV_FREE pages check in folio_check_dirty_writeback is a bit hard to
follow. Add a comment to make the code clear.
Link: https://lkml.kernel.org/r/20220425111232.23182-2-linmiaohe@huawei.com
Suggested-by: Huang, Ying <ying.huang@intel.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wei Yang [Fri, 13 May 2022 03:22:59 +0000 (20:22 -0700)]
mm/vmscan: not necessary to re-init the list for each iteration
node_page_list is defined with LIST_HEAD and be cleaned until
list_empty.
So it is not necessary to re-init it again.
[akpm@linux-foundation.org: remove unneeded braces]
Link: https://lkml.kernel.org/r/20220426021743.21007-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jagdish Gediya [Fri, 13 May 2022 03:22:59 +0000 (20:22 -0700)]
mm: convert sysfs input to bool using kstrtobool()
Sysfs input conversion to corrosponding bool value e.g. "false" or "0" to
false, "true" or "1" to true are currently handled through strncmp at
multiple places. Use kstrtobool() to convert sysfs input to bool value.
[akpm@linux-foundation.org: propagate kstrtobool() return value, per Andy]
Link: https://lkml.kernel.org/r/20220426180203.70782-2-jvgediya@linux.ibm.com
Signed-off-by: Jagdish Gediya <jvgediya@linux.ibm.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jagdish Gediya [Fri, 13 May 2022 03:22:59 +0000 (20:22 -0700)]
lib/kstrtox.c: add "false"/"true" support to kstrtobool()
At many places in kernel, It is necessary to convert sysfs input to
corresponding bool value e.g. "false" or "0" need to be converted to bool
false, "true" or "1" need to be converted to bool true, places where such
conversion is needed currently check the input string manually,
kstrtobool() can be utilized at such places but currently it doesn't have
support to accept "false"/"true".
Add support to accept "false"/"true" as valid string in kstrtobool().
[akpm@linux-foundation.org: undo s/iff/if/, per Matthew]
Link: https://lkml.kernel.org/r/20220426180203.70782-1-jvgediya@linux.ibm.com
Signed-off-by: Jagdish Gediya <jvgediya@linux.ibm.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Fri, 13 May 2022 03:22:58 +0000 (20:22 -0700)]
mm/vmscan: take min_slab_pages into account when try to call shrink_node
Since commit
6b4f7799c6a5 ("mm: vmscan: invoke slab shrinkers from
shrink_zone()"), slab reclaim and lru page reclaim are done together in
the shrink_node. So we should take min_slab_pages into account when try
to call shrink_node.
Link: https://lkml.kernel.org/r/20220425112118.20924-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zi Yan [Fri, 13 May 2022 03:22:58 +0000 (20:22 -0700)]
drivers: virtio_mem: use pageblock size as the minimum virtio_mem size.
alloc_contig_range() now only needs to be aligned to pageblock_nr_pages,
drop virtio_mem size requirement that it needs to be MAX_ORDER_NR_PAGES.
Link: https://lkml.kernel.org/r/20220425143118.2850746-7-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zi Yan [Fri, 13 May 2022 03:22:58 +0000 (20:22 -0700)]
mm: cma: use pageblock_order as the single alignment
Now alloc_contig_range() works at pageblock granularity. Change CMA
allocation, which uses alloc_contig_range(), to use pageblock_nr_pages
alignment.
Link: https://lkml.kernel.org/r/20220425143118.2850746-6-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zi Yan [Fri, 13 May 2022 03:22:58 +0000 (20:22 -0700)]
mm: page_isolation: enable arbitrary range page isolation.
Now start_isolate_page_range() is ready to handle arbitrary range
isolation, so move the alignment check/adjustment into the function body.
Do the same for its counterpart undo_isolate_page_range().
alloc_contig_range(), its caller, can pass an arbitrary range instead of a
MAX_ORDER_NR_PAGES aligned one.
Link: https://lkml.kernel.org/r/20220425143118.2850746-5-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zi Yan [Fri, 13 May 2022 03:22:58 +0000 (20:22 -0700)]
mm: make alloc_contig_range work at pageblock granularity
alloc_contig_range() worked at MAX_ORDER_NR_PAGES granularity to avoid
merging pageblocks with different migratetypes. It might unnecessarily
convert extra pageblocks at the beginning and at the end of the range.
Change alloc_contig_range() to work at pageblock granularity.
Special handling is needed for free pages and in-use pages across the
boundaries of the range specified by alloc_contig_range(). Because these=
Partially isolated pages causes free page accounting issues. The free
pages will be split and freed into separate migratetype lists; the in-use=
Pages will be migrated then the freed pages will be handled in the
aforementioned way.
[ziy@nvidia.com: fix deadlock/crash]
Link: https://lkml.kernel.org/r/23A7297E-6C84-4138-A9FE-3598234004E6@nvidia.com
Link: https://lkml.kernel.org/r/20220425143118.2850746-4-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zi Yan [Fri, 13 May 2022 03:22:58 +0000 (20:22 -0700)]
mm: page_isolation: check specified range for unmovable pages
Enable set_migratetype_isolate() to check specified range for unmovable
pages during isolation to prepare arbitrary range page isolation. The
functionality will take effect in upcoming commits by adjusting the
callers of start_isolate_page_range(), which uses
set_migratetype_isolate().
For example, alloc_contig_range(), which calls start_isolate_page_range(),
accepts unaligned ranges, but because page isolation is currently done at
MAX_ORDER_NR_PAEGS granularity, pages that are out of the specified range
but withint MAX_ORDER_NR_PAEGS alignment might be attempted for isolation
and the failure of isolating these unrelated pages fails the whole
operation undesirably.
Link: https://lkml.kernel.org/r/20220425143118.2850746-3-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zi Yan [Fri, 13 May 2022 03:22:57 +0000 (20:22 -0700)]
mm: page_isolation: move has_unmovable_pages() to mm/page_isolation.c
Patch series "Use pageblock_order for cma and alloc_contig_range alignment", v11.
This patchset tries to remove the MAX_ORDER-1 alignment requirement for CMA
and alloc_contig_range(). It prepares for my upcoming changes to make
MAX_ORDER adjustable at boot time[1].
The MAX_ORDER - 1 alignment requirement comes from that
alloc_contig_range() isolates pageblocks to remove free memory from buddy
allocator but isolating only a subset of pageblocks within a page spanning
across multiple pageblocks causes free page accounting issues. Isolated
page might not be put into the right free list, since the code assumes the
migratetype of the first pageblock as the whole free page migratetype.
This is based on the discussion at [2].
To remove the requirement, this patchset:
1. isolates pages at pageblock granularity instead of
max(MAX_ORDER_NR_PAEGS, pageblock_nr_pages);
2. splits free pages across the specified range or migrates in-use pages
across the specified range then splits the freed page to avoid free page
accounting issues (it happens when multiple pageblocks within a single page
have different migratetypes);
3. only checks unmovable pages within the range instead of MAX_ORDER - 1 aligned
range during isolation to avoid alloc_contig_range() failure when pageblocks
within a MAX_ORDER - 1 aligned range are allocated separately.
4. returns pages not in the range as it did before.
One optimization might come later:
1. make MIGRATE_ISOLATE a separate bit to be able to restore the original
migratetypes when isolation fails in the middle of the range.
[1] https://lore.kernel.org/linux-mm/
20210805190253.
2795604-1-zi.yan@sent.com/
[2] https://lore.kernel.org/linux-mm/
d19fb078-cb9b-f60f-e310-
fdeea1b947d2@redhat.com/
This patch (of 6):
has_unmovable_pages() is only used in mm/page_isolation.c. Move it from
mm/page_alloc.c and make it static.
Link: https://lkml.kernel.org/r/20220425143118.2850746-2-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Minchan Kim <minchan@kernel.org>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Vernet [Fri, 13 May 2022 03:22:57 +0000 (20:22 -0700)]
cgroup: fix racy check in alloc_pagecache_max_30M() helper function
alloc_pagecache_max_30M() in the cgroup memcg tests performs a 50MB
pagecache allocation, which it expects to be capped at 30MB due to the
calling process having a memory.high setting of 30MB. After the
allocation, the function contains a check that verifies that MB(29) <
memory.current <= MB(30). This check can actually fail
non-deterministically.
The testcases that use this function are test_memcg_high() and
test_memcg_max(), which set memory.min and memory.max to 30MB respectively
for the cgroup under test. The allocation can slightly exceed this number
in both cases, and for memory.max, the process performing the allocation
will not have the OOM killer invoked as it's performing a pagecache
allocation. This patchset therefore updates the above check to instead
use the verify_close() helper function.
Link: https://lkml.kernel.org/r/20220423155619.3669555-6-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Vernet [Fri, 13 May 2022 03:22:57 +0000 (20:22 -0700)]
cgroup: remove racy check in test_memcg_sock()
test_memcg_sock() in the cgroup memcg tests, verifies expected memory
accounting for sockets. The test forks a process which functions as a TCP
server, and sends large buffers back and forth between itself (as the TCP
client) and the forked TCP server. While doing so, it verifies that
memory.current and memory.stat.sock look correct.
There is currently a check in tcp_client() which asserts memory.current >=
memory.stat.sock. This check is racy, as between memory.current and
memory.stat.sock being queried, a packet could come in which causes
mem_cgroup_charge_skmem() to be invoked. This could cause
memory.stat.sock to exceed memory.current. Reversing the order of
querying doesn't address the problem either, as memory may be reclaimed
between the two calls. Instead, this patch just removes that assertion
altogether, and instead relies on the values_close() check that follows to
validate the expected accounting.
Link: https://lkml.kernel.org/r/20220423155619.3669555-5-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Vernet [Fri, 13 May 2022 03:22:57 +0000 (20:22 -0700)]
cgroup: account for memory_localevents in test_memcg_oom_group_leaf_events()
The test_memcg_oom_group_leaf_events() testcase in the cgroup memcg tests
validates that processes in a group that perform allocations exceeding
memory.oom.group are killed. It also validates that the
memory.events.oom_kill events are properly propagated in this case.
Commit
06e11c907ea4 ("kselftests: memcg: update the oom group leaf events
test") fixed test_memcg_oom_group_leaf_events() to account for the fact
that the memory.events.oom_kill events in a child cgroup is propagated up
to its parent. This behavior can actually be configured by the
memory_localevents mount option, so this patch updates the testcase to
properly account for the possible presence of this mount option.
Link: https://lkml.kernel.org/r/20220423155619.3669555-4-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Vernet [Fri, 13 May 2022 03:22:57 +0000 (20:22 -0700)]
cgroup: account for memory_recursiveprot in test_memcg_low()
The test_memcg_low() testcase in test_memcontrol.c verifies the expected
behavior of groups using the memory.low knob. Part of the testcase
verifies that a group with memory.low that experiences reclaim due to
memory pressure elsewhere in the system, observes memory.events.low events
as a result of that reclaim.
In commit
8a931f801340 ("mm: memcontrol: recursive memory.low
protection"), the memory controller was updated to propagate memory.low
and memory.min protection from a parent group to its children via a
configurable memory_recursiveprot mount option. This unfortunately broke
the memcg tests, which asserts that a sibling that experienced reclaim but
had a memory.low value of 0, would not observe any memory.low events.
This patch updates test_memcg_low() to account for the new behavior
introduced by memory_recursiveprot.
So as to make the test resilient to multiple configurations, the patch
also adds a new proc_mount_contains() helper that checks for a string in
/proc/mounts, and is used to toggle behavior based on whether the default
memory_recursiveprot was present.
Link: https://lkml.kernel.org/r/20220423155619.3669555-3-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
David Vernet [Fri, 13 May 2022 03:22:56 +0000 (20:22 -0700)]
cgroups: refactor children cgroups in memcg tests
Patch series "Fix bugs in memcontroller cgroup tests", v2.
tools/testing/selftests/cgroup/test_memcontrol.c contains a set of
testcases which validate expected behavior of the cgroup memory
controller. Roman Gushchin recently sent out a patchset that fixed a few
issues in the test. This patchset continues that effort by fixing a few
more issues that were causing non-deterministic failures in the suite.
With this patchset, I'm unable to reproduce any more errors after running
the tests in a continuous loop for many iterations. Before, I was able to
reproduce at least one of the errors fixed in this patchset with just one
or two runs.
This patch (of 5):
In test_memcg_min() and test_memcg_low(), there is an array of four
sibling cgroups. All but one of these sibling groups does a 50MB
allocation, and the group that does no allocation is the third of four in
the array. This is not a problem per se, but makes it a bit tricky to do
some assertions in test_memcg_low(), as we want to make assertions on the
siblings based on whether or not they performed allocations. Having a
static index before which all groups have performed an allocation makes
this cleaner.
This patch therefore reorders the sibling groups so that the group that
performs no allocations is the last in the array. A follow-on patch will
leverage this to fix a bug in the test that incorrectly asserts that a
sibling group that had performed an allocation, but only had protection
from its parent, will not observe any memory.events.low events during
reclaim.
Link: https://lkml.kernel.org/r/20220423155619.3669555-1-void@manifault.com
Link: https://lkml.kernel.org/r/20220423155619.3669555-2-void@manifault.com
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:56 +0000 (20:22 -0700)]
mm/uffd: move USERFAULTFD configs into mm/
We used to have USERFAULTFD configs stored in init/. It makes sense as a
start because that's the default place for storing syscall related
configs.
However userfaultfd evolved a bit in the past few years and some more
config options were added. They're no longer related to syscalls and
start to be not suitable to be kept in the init/ directory anymore,
because they're pure mm concepts.
But it's not ideal either to keep the userfaultfd configs separate from
each other. Hence this patch moves the userfaultfd configs under init/ to
be under mm/ so that we'll start to group all userfaultfd configs
together.
We do have quite a few examples of syscall related configs that are not
put under init/Kconfig: FTRACE_SYSCALLS, SWAP, FILE_LOCKING,
MEMFD_CREATE.. They all reside in the dir where they're more suitable for
the concept. So it seems there's no restriction to keep the role of
having syscall related CONFIG_* under init/ only.
Link: https://lkml.kernel.org/r/20220420144823.35277-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Guo Zhengkui [Fri, 13 May 2022 03:22:56 +0000 (20:22 -0700)]
userfaultfd/selftests: use swap() instead of open coding it
Address the following coccicheck warning:
tools/testing/selftests/vm/userfaultfd.c:1536:21-22: WARNING opportunity
for swap().
tools/testing/selftests/vm/userfaultfd.c:1540:33-34: WARNING opportunity
for swap().
by using swap() for the swapping of variable values and drop
`tmp_area` that is not needed any more.
`swap()` macro in userfaultfd.c is introduced in commit
681696862bc18
("selftests: vm: remove dependecy from internal kernel macros")
It has been tested with gcc (Debian 8.3.0-6) 8.3.0.
Link: https://lkml.kernel.org/r/20220407123141.4998-1-guozhengkui@vivo.com
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:56 +0000 (20:22 -0700)]
selftests/uffd: enable uffd-wp for shmem/hugetlbfs
After we added support for shmem and hugetlbfs, we can turn uffd-wp test
on always now.
Link: https://lkml.kernel.org/r/20220405014932.15212-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:56 +0000 (20:22 -0700)]
mm: enable PTE markers by default
Enable PTE markers by default. On x86_64 it means it'll auto-enable
PTE_MARKER_UFFD_WP as well.
[peterx@redhat.com: hide PTE_MARKER option]
Link: https://lkml.kernel.org/r/20220419202531.27415-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20220405014929.15158-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:56 +0000 (20:22 -0700)]
mm/uffd: enable write protection for shmem & hugetlbfs
We've had all the necessary changes ready for both shmem and hugetlbfs.
Turn on all the shmem/hugetlbfs switches for userfaultfd-wp.
We can expand UFFD_API_RANGE_IOCTLS_BASIC with _UFFDIO_WRITEPROTECT too
because all existing types now support write protection mode.
Since vma_can_userfault() will be used elsewhere, move into userfaultfd_k.h.
Link: https://lkml.kernel.org/r/20220405014926.15101-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:55 +0000 (20:22 -0700)]
mm/pagemap: recognize uffd-wp bit for shmem/hugetlbfs
This requires the pagemap code to be able to recognize the newly
introduced swap special pte for uffd-wp, meanwhile the general case for
hugetlb that we recently start to support. It should make pagemap uffd-wp
support complete.
Link: https://lkml.kernel.org/r/20220405014923.15047-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:55 +0000 (20:22 -0700)]
mm/khugepaged: don't recycle vma pgtable if uffd-wp registered
When we're trying to collapse a 2M huge shmem page, don't retract pgtable
pmd page if it's registered with uffd-wp, because that pgtable could have
pte markers installed. Recycling of that pgtable means we'll lose the pte
markers. That could cause data loss for an uffd-wp enabled application on
shmem.
Instead of disabling khugepaged on these files, simply skip retracting
these special VMAs, then the page cache can still be merged into a huge
thp, and other mm/vma can still map the range of file with a huge thp when
proper.
Note that checking VM_UFFD_WP needs to be done with mmap_sem held for
write, that avoids race like:
khugepaged user thread
========== ===========
check VM_UFFD_WP, not set
UFFDIO_REGISTER with uffd-wp on shmem
wr-protect some pages (install markers)
take mmap_sem write lock
erase pmd and free pmd page
--> pte markers are dropped unnoticed!
Link: https://lkml.kernel.org/r/20220405014921.14994-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:55 +0000 (20:22 -0700)]
mm/hugetlb: handle uffd-wp during fork()
Firstly, we'll need to pass in dst_vma into copy_hugetlb_page_range()
because for uffd-wp it's the dst vma that matters on deciding how we
should treat uffd-wp protected ptes.
We should recognize pte markers during fork and do the pte copy if needed.
[lkp@intel.com: vma_needs_copy can be static]
Link: https://lkml.kernel.org/r/Ylb0CGeFJlc4EzLk@7ec4ff11d4ae
Link: https://lkml.kernel.org/r/20220405014918.14932-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:55 +0000 (20:22 -0700)]
mm/hugetlb: only drop uffd-wp special pte if required
As with shmem uffd-wp special ptes, only drop the uffd-wp special swap pte
if unmapping an entire vma or synchronized such that faults can not race
with the unmap operation. This requires passing zap_flags all the way to
the lowest level hugetlb unmap routine: __unmap_hugepage_range.
In general, unmap calls originated in hugetlbfs code will pass the
ZAP_FLAG_DROP_MARKER flag as synchronization is in place to prevent
faults. The exception is hole punch which will first unmap without any
synchronization. Later when hole punch actually removes the page from the
file, it will check to see if there was a subsequent fault and if so take
the hugetlb fault mutex while unmapping again. This second unmap will
pass in ZAP_FLAG_DROP_MARKER.
The justification of "whether to apply ZAP_FLAG_DROP_MARKER flag when
unmap a hugetlb range" is (IMHO): we should never reach a state when a
page fault could errornously fault in a page-cache page that was
wr-protected to be writable, even in an extremely short period. That
could happen if e.g. we pass ZAP_FLAG_DROP_MARKER when
hugetlbfs_punch_hole() calls hugetlb_vmdelete_list(), because if a page
faults after that call and before remove_inode_hugepages() is executed,
the page cache can be mapped writable again in the small racy window, that
can cause unexpected data overwritten.
[peterx@redhat.com: fix sparse warning]
Link: https://lkml.kernel.org/r/Ylcdw8I1L5iAoWhb@xz-m1.local
[akpm@linux-foundation.org: move zap_flags_t from mm.h to mm_types.h to fix build issues]
Link: https://lkml.kernel.org/r/20220405014915.14873-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:55 +0000 (20:22 -0700)]
mm/hugetlb: allow uffd wr-protect none ptes
Teach hugetlbfs code to wr-protect none ptes just in case the page cache
existed for that pte. Meanwhile we also need to be able to recognize a
uffd-wp marker pte and remove it for uffd_wp_resolve.
Since at it, introduce a variable "psize" to replace all references to the
huge page size fetcher.
Link: https://lkml.kernel.org/r/20220405014912.14815-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:54 +0000 (20:22 -0700)]
mm/hugetlb: handle pte markers in page faults
Allow hugetlb code to handle pte markers just like none ptes. It's mostly
there, we just need to make sure we don't assume hugetlb_no_page() only
handles none pte, so when detecting pte change we should use pte_same()
rather than pte_none(). We need to pass in the old_pte to do the
comparison.
Check the original pte to see whether it's a pte marker, if it is, we
should recover uffd-wp bit on the new pte to be installed, so that the
next write will be trapped by uffd.
Link: https://lkml.kernel.org/r/20220405014909.14761-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:54 +0000 (20:22 -0700)]
mm/hugetlb: handle UFFDIO_WRITEPROTECT
This starts from passing cp_flags into hugetlb_change_protection() so
hugetlb will be able to handle MM_CP_UFFD_WP[_RESOLVE] requests.
huge_pte_clear_uffd_wp() is introduced to handle the case where the
UFFDIO_WRITEPROTECT is requested upon migrating huge page entries.
Link: https://lkml.kernel.org/r/20220405014906.14708-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:54 +0000 (20:22 -0700)]
mm/hugetlb: take care of UFFDIO_COPY_MODE_WP
Pass the wp_copy variable into hugetlb_mcopy_atomic_pte() thoughout the
stack. Apply the UFFD_WP bit if UFFDIO_COPY_MODE_WP is with UFFDIO_COPY.
Hugetlb pages are only managed by hugetlbfs, so we're safe even without
setting dirty bit in the huge pte if the page is installed as read-only.
However we'd better still keep the dirty bit set for a read-only
UFFDIO_COPY pte (when UFFDIO_COPY_MODE_WP bit is set), not only to match
what we do with shmem, but also because the page does contain dirty data
that the kernel just copied from the userspace.
Link: https://lkml.kernel.org/r/20220405014904.14643-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:54 +0000 (20:22 -0700)]
mm/hugetlb: hook page faults for uffd write protection
Hook up hugetlbfs_fault() with the capability to handle userfaultfd-wp
faults.
We do this slightly earlier than hugetlb_cow() so that we can avoid taking
some extra locks that we definitely don't need.
Link: https://lkml.kernel.org/r/20220405014901.14590-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:54 +0000 (20:22 -0700)]
mm/hugetlb: introduce huge pte version of uffd-wp helpers
They will be used in the follow up patches to either check/set/clear
uffd-wp bit of a huge pte.
So far it reuses all the small pte helpers. Archs can overwrite these
versions when necessary (with __HAVE_ARCH_HUGE_PTE_UFFD_WP* macros) in the
future.
Link: https://lkml.kernel.org/r/20220405014858.14531-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:53 +0000 (20:22 -0700)]
mm/shmem: handle uffd-wp during fork()
Normally we skip copy page when fork() for VM_SHARED shmem, but we can't
skip it anymore if uffd-wp is enabled on dst vma. This should only happen
when the src uffd has UFFD_FEATURE_EVENT_FORK enabled on uffd-wp shmem
vma, so that VM_UFFD_WP will be propagated onto dst vma too, then we
should copy the pgtables with uffd-wp bit and pte markers, because these
information will be lost otherwise.
Since the condition checks will become even more complicated for deciding
"whether a vma needs to copy the pgtable during fork()", introduce a
helper vma_needs_copy() for it, so everything will be clearer.
Link: https://lkml.kernel.org/r/20220405014855.14468-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:53 +0000 (20:22 -0700)]
mm/shmem: allows file-back mem to be uffd wr-protected on thps
We don't have "huge" version of pte markers, instead when necessary we
split the thp.
However split the thp is not enough, because file-backed thp is handled
totally differently comparing to anonymous thps: rather than doing a real
split, the thp pmd will simply got cleared in __split_huge_pmd_locked().
That is not enough if e.g. when there is a thp covers range [0, 2M) but
we want to wr-protect small page resides in [4K, 8K) range, because after
__split_huge_pmd() returns, there will be a none pmd, and
change_pmd_range() will just skip it right after the split.
Here we leverage the previously introduced change_pmd_prepare() macro so
that we'll populate the pmd with a pgtable page after the pmd split (in
which process the pmd will be cleared for cases like shmem). Then
change_pte_range() will do all the rest for us by installing the uffd-wp
pte marker at any none pte that we'd like to wr-protect.
Link: https://lkml.kernel.org/r/20220405014852.14413-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:53 +0000 (20:22 -0700)]
mm/shmem: allow uffd wr-protect none pte for file-backed mem
File-backed memory differs from anonymous memory in that even if the pte
is missing, the data could still resides either in the file or in
page/swap cache. So when wr-protect a pte, we need to consider none ptes
too.
We do that by installing the uffd-wp pte markers when necessary. So when
there's a future write to the pte, the fault handler will go the special
path to first fault-in the page as read-only, then report to userfaultfd
server with the wr-protect message.
On the other hand, when unprotecting a page, it's also possible that the
pte got unmapped but replaced by the special uffd-wp marker. Then we'll
need to be able to recover from a uffd-wp pte marker into a none pte, so
that the next access to the page will fault in correctly as usual when
accessed the next time.
Special care needs to be taken throughout the change_protection_range()
process. Since now we allow user to wr-protect a none pte, we need to be
able to pre-populate the page table entries if we see (!anonymous &&
MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always
skip when the pgtable entry does not exist.
For example, the pgtable can be missing for a whole chunk of 2M pmd, but
the page cache can exist for the 2M range. When we want to wr-protect one
4K page within the 2M pmd range, we need to pre-populate the pgtable and
install the pte marker showing that we want to get a message and block the
thread when the page cache of that 4K page is written. Without
pre-populating the pmd, change_protection() will simply skip that whole
pmd.
Note that this patch only covers the small pages (pte level) but not
covering any of the transparent huge pages yet. That will be done later,
and this patch will be a preparation for it too.
Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:53 +0000 (20:22 -0700)]
mm/shmem: persist uffd-wp bit across zapping for file-backed
File-backed memory is prone to being unmapped at any time. It means all
information in the pte will be dropped, including the uffd-wp flag.
To persist the uffd-wp flag, we'll use the pte markers. This patch
teaches the zap code to understand uffd-wp and know when to keep or drop
the uffd-wp bit.
Add a new flag ZAP_FLAG_DROP_MARKER and set it in zap_details when we
don't want to persist such an information, for example, when destroying
the whole vma, or punching a hole in a shmem file. For the rest cases we
should never drop the uffd-wp bit, or the wr-protect information will get
lost.
The new ZAP_FLAG_DROP_MARKER needs to be put into mm.h rather than
memory.c because it'll be further referenced in hugetlb files later.
Link: https://lkml.kernel.org/r/20220405014847.14295-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:53 +0000 (20:22 -0700)]
mm/shmem: handle uffd-wp special pte in page fault handler
File-backed memories are prone to unmap/swap so the ptes are always
unstable, because they can be easily faulted back later using the page
cache. This could lead to uffd-wp getting lost when unmapping or swapping
out such memory. One example is shmem. PTE markers are needed to store
those information.
This patch prepares it by handling uffd-wp pte markers first it is applied
elsewhere, so that the page fault handler can recognize uffd-wp pte
markers.
The handling of uffd-wp pte markers is similar to missing fault, it's just
that we'll handle this "missing fault" when we see the pte markers,
meanwhile we need to make sure the marker information is kept during
processing the fault.
This is a slow path of uffd-wp handling, because zapping of wr-protected
shmem ptes should be rare. So far it should only trigger in two
conditions:
(1) When trying to punch holes in shmem_fallocate(), there is an
optimization to zap the pgtables before evicting the page.
(2) When swapping out shmem pages.
Because of this, the page fault handling is simplifed too by not sending
the wr-protect message in the 1st page fault, instead the page will be
installed read-only, so the uffd-wp message will be generated in the next
fault, which will trigger the do_wp_page() path of general uffd-wp
handling.
Disable fault-around for all uffd-wp registered ranges for extra safety
just like uffd-minor fault, and clean the code up.
Link: https://lkml.kernel.org/r/20220405014844.14239-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:52 +0000 (20:22 -0700)]
mm/shmem: take care of UFFDIO_COPY_MODE_WP
Pass wp_copy into shmem_mfill_atomic_pte() through the stack, then apply
the UFFD_WP bit properly when the UFFDIO_COPY on shmem is with
UFFDIO_COPY_MODE_WP. wp_copy lands mfill_atomic_install_pte() finally.
Note: we must do pte_wrprotect() if !writable in
mfill_atomic_install_pte(), as mk_pte() could return a writable pte (e.g.,
when VM_SHARED on a shmem file).
Link: https://lkml.kernel.org/r/20220405014841.14185-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:52 +0000 (20:22 -0700)]
mm/uffd: PTE_MARKER_UFFD_WP
This patch introduces the 1st user of pte marker: the uffd-wp marker.
When the pte marker is installed with the uffd-wp bit set, it means this
pte was wr-protected by uffd.
We will use this special pte to arm the ptes that got either unmapped or
swapped out for a file-backed region that was previously wr-protected.
This special pte could trigger a page fault just like swap entries.
This idea is greatly inspired by Hugh and Andrea in the discussion, which
is referenced in the links below.
Some helpers are introduced to detect whether a swap pte is uffd
wr-protected. After the pte marker introduced, one swap pte can be
wr-protected in two forms: either it is a normal swap pte and it has
_PAGE_SWP_UFFD_WP set, or it's a pte marker that has PTE_MARKER_UFFD_WP
set.
[peterx@redhat.com: fixup]
Link: https://lkml.kernel.org/r/YkzKiM8tI4+qOfXF@xz-m1.local
Link: https://lore.kernel.org/lkml/20201126222359.8120-1-peterx@redhat.com/
Link: https://lore.kernel.org/lkml/20201130230603.46187-1-peterx@redhat.com/
Link: https://lkml.kernel.org/r/20220405014838.14131-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:52 +0000 (20:22 -0700)]
mm: check against orig_pte for finish_fault()
This patch allows do_fault() to trigger on !pte_none() cases too. This
prepares for the pte markers to be handled by do_fault() just like none
pte.
To achieve this, instead of unconditionally check against pte_none() in
finish_fault(), we may hit the case that the orig_pte was some pte marker
so what we want to do is to replace the pte marker with some valid pte
entry. Then if orig_pte was set we'd want to check the current *pte
(under pgtable lock) against orig_pte rather than none pte.
Right now there's no solid way to safely reference orig_pte because when
pmd is not allocated handle_pte_fault() will not initialize orig_pte, so
it's not safe to reference it.
There's another solution proposed before this patch to do pte_clear() for
vmf->orig_pte for pmd==NULL case, however it turns out it'll break arm32
because arm32 could have assumption that pte_t* pointer will always reside
on a real ram32 pgtable, not any kernel stack variable.
To solve this, we add a new flag FAULT_FLAG_ORIG_PTE_VALID, and it'll be
set along with orig_pte when there is valid orig_pte, or it'll be cleared
when orig_pte was not initialized.
It'll be updated every time we call handle_pte_fault(), so e.g. if a page
fault retry happened it'll be properly updated along with orig_pte.
[1] https://lore.kernel.org/lkml/
710c48c9-406d-e4c5-a394-
10501b951316@samsung.com/
[akpm@linux-foundation.org: coding-style cleanups]
[peterx@redhat.com: fix crash reported by Marek]
Link: https://lkml.kernel.org/r/Ylb9rXJyPm8/ao8f@xz-m1.local
Link: https://lkml.kernel.org/r/20220405014836.14077-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:52 +0000 (20:22 -0700)]
mm: teach core mm about pte markers
This patch still does not use pte marker in any way, however it teaches
the core mm about the pte marker idea.
For example, handle_pte_marker() is introduced that will parse and handle
all the pte marker faults.
Many of the places are more about commenting it up - so that we know
there's the possibility of pte marker showing up, and why we don't need
special code for the cases.
[peterx@redhat.com: userfaultfd.c needs swapops.h]
Link: https://lkml.kernel.org/r/YmRlVj3cdizYJsr0@xz-m1.local
Link: https://lkml.kernel.org/r/20220405014833.14015-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Fri, 13 May 2022 03:22:52 +0000 (20:22 -0700)]
mm: introduce PTE_MARKER swap entry
Patch series "userfaultfd-wp: Support shmem and hugetlbfs", v8.
Overview
========
Userfaultfd-wp anonymous support was merged two years ago. There're quite
a few applications that started to leverage this capability either to take
snapshots for user-app memory, or use it for full user controled swapping.
This series tries to complete the feature for uffd-wp so as to cover all
the RAM-based memory types. So far uffd-wp is the only missing piece of
the rest features (uffd-missing & uffd-minor mode).
One major reason to do so is that anonymous pages are sometimes not
satisfying the need of applications, and there're growing users of either
shmem and hugetlbfs for either sharing purpose (e.g., sharing guest mem
between hypervisor process and device emulation process, shmem local live
migration for upgrades), or for performance on tlb hits.
All these mean that if a uffd-wp app wants to switch to any of the memory
types, it'll stop working. I think it's worthwhile to have the kernel to
cover all these aspects.
This series chose to protect pages in pte level not page level.
One major reason is safety. I have no idea how we could make it safe if
any of the uffd-privileged app can wr-protect a page that any other
application can use. It means this app can block any process potentially
for any time it wants.
The other reason is that it aligns very well with not only the anonymous
uffd-wp solution, but also uffd as a whole. For example, userfaultfd is
implemented fundamentally based on VMAs. We set flags to VMAs showing the
status of uffd tracking. For another per-page based protection solution,
it'll be crossing the fundation line on VMA-based, and it could simply be
too far away already from what's called userfaultfd.
PTE markers
===========
The patchset is based on the idea called PTE markers. It was discussed in
one of the mm alignment sessions, proposed starting from v6, and this is
the 2nd version of it using PTE marker idea.
PTE marker is a new type of swap entry that is ony applicable to file
backed memories like shmem and hugetlbfs. It's used to persist some
pte-level information even if the original present ptes in pgtable are
zapped.
Logically pte markers can store more than uffd-wp information, but so far
only one bit is used for uffd-wp purpose. When the pte marker is
installed with uffd-wp bit set, it means this pte is wr-protected by uffd.
It solves the problem on e.g. file-backed memory mapped ptes got zapped
due to any reason (e.g. thp split, or swapped out), we can still keep the
wr-protect information in the ptes. Then when the page fault triggers
again, we'll know this pte is wr-protected so we can treat the pte the
same as a normal uffd wr-protected pte.
The extra information is encoded into the swap entry, or swp_offset to be
explicit, with the swp_type being PTE_MARKER. So far uffd-wp only uses
one bit out of the swap entry, the rest bits of swp_offset are still
reserved for other purposes.
There're two configs to enable/disable PTE markers:
CONFIG_PTE_MARKER
CONFIG_PTE_MARKER_UFFD_WP
We can set !PTE_MARKER to completely disable all the PTE markers, along
with uffd-wp support. I made two config so we can also enable PTE marker
but disable uffd-wp file-backed for other purposes. At the end of current
series, I'll enable CONFIG_PTE_MARKER by default, but that patch is
standalone and if anyone worries about having it by default, we can also
consider turn it off by dropping that oneliner patch. So far I don't see
a huge risk of doing so, so I kept that patch.
In most cases, PTE markers should be treated as none ptes. It is because
that unlike most of the other swap entry types, there's no PFN or block
offset information encoded into PTE markers but some extra well-defined
bits showing the status of the pte. These bits should only be used as
extra data when servicing an upcoming page fault, and then we behave as if
it's a none pte.
I did spend a lot of time observing all the pte_none() users this time.
It is indeed a challenge because there're a lot, and I hope I didn't miss
a single of them when we should take care of pte markers. Luckily, I
don't think it'll need to be considered in many cases, for example: boot
code, arch code (especially non-x86), kernel-only page handlings (e.g.
CPA), or device driver codes when we're tackling with pure PFN mappings.
I introduced pte_none_mostly() in this series when we need to handle pte
markers the same as none pte, the "mostly" is the other way to write
"either none pte or a pte marker".
I didn't replace pte_none() to cover pte markers for below reasons:
- Very rare case of pte_none() callers will handle pte markers. E.g., all
the kernel pages do not require knowledge of pte markers. So we don't
pollute the major use cases.
- Unconditionally change pte_none() semantics could confuse people, because
pte_none() existed for so long a time.
- Unconditionally change pte_none() semantics could make pte_none() slower
even if in many cases pte markers do not exist.
- There're cases where we'd like to handle pte markers differntly from
pte_none(), so a full replace is also impossible. E.g. khugepaged should
still treat pte markers as normal swap ptes rather than none ptes, because
pte markers will always need a fault-in to merge the marker with a valid
pte. Or the smap code will need to parse PTE markers not none ptes.
Patch Layout
============
Introducing PTE marker and uffd-wp bit in PTE marker:
mm: Introduce PTE_MARKER swap entry
mm: Teach core mm about pte markers
mm: Check against orig_pte for finish_fault()
mm/uffd: PTE_MARKER_UFFD_WP
Adding support for shmem uffd-wp:
mm/shmem: Take care of UFFDIO_COPY_MODE_WP
mm/shmem: Handle uffd-wp special pte in page fault handler
mm/shmem: Persist uffd-wp bit across zapping for file-backed
mm/shmem: Allow uffd wr-protect none pte for file-backed mem
mm/shmem: Allows file-back mem to be uffd wr-protected on thps
mm/shmem: Handle uffd-wp during fork()
Adding support for hugetlbfs uffd-wp:
mm/hugetlb: Introduce huge pte version of uffd-wp helpers
mm/hugetlb: Hook page faults for uffd write protection
mm/hugetlb: Take care of UFFDIO_COPY_MODE_WP
mm/hugetlb: Handle UFFDIO_WRITEPROTECT
mm/hugetlb: Handle pte markers in page faults
mm/hugetlb: Allow uffd wr-protect none ptes
mm/hugetlb: Only drop uffd-wp special pte if required
mm/hugetlb: Handle uffd-wp during fork()
Misc handling on the rest mm for uffd-wp file-backed:
mm/khugepaged: Don't recycle vma pgtable if uffd-wp registered
mm/pagemap: Recognize uffd-wp bit for shmem/hugetlbfs
Enabling of uffd-wp on file-backed memory:
mm/uffd: Enable write protection for shmem & hugetlbfs
mm: Enable PTE markers by default
selftests/uffd: Enable uffd-wp for shmem/hugetlbfs
Tests
=====
- Compile test on x86_64 and aarch64 on different configs
- Kernel selftests
- uffd-test [0]
- Umapsort [1,2] test for shmem/hugetlb, with swap on/off
[0] https://github.com/xzpeter/clibs/tree/master/uffd-test
[1] https://github.com/xzpeter/umap-apps/tree/peter
[2] https://github.com/xzpeter/umap/tree/peter-shmem-hugetlbfs
This patch (of 23):
Introduces a new swap entry type called PTE_MARKER. It can be installed
for any pte that maps a file-backed memory when the pte is temporarily
zapped, so as to maintain per-pte information.
The information that kept in the pte is called a "marker". Here we define
the marker as "unsigned long" just to match pgoff_t, however it will only
work if it still fits in swp_offset(), which is e.g. currently 58 bits on
x86_64.
A new config CONFIG_PTE_MARKER is introduced too; it's by default off. A
bunch of helpers are defined altogether to service the rest of the pte
marker code.
[peterx@redhat.com: fixup]
Link: https://lkml.kernel.org/r/Yk2rdB7SXZf+2BDF@xz-m1.local
Link: https://lkml.kernel.org/r/20220405014646.13522-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20220405014646.13522-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wonhyuk Yang [Fri, 13 May 2022 03:22:51 +0000 (20:22 -0700)]
mm/page_alloc: cache the result of node_dirty_ok()
To spread dirty pages, nodes are checked whether they have reached the
dirty limit using the expensive node_dirty_ok(). To reduce the frequency
of calling node_dirty_ok(), the last node that hit the dirty limit can be
cached.
Instead of caching the node, caching both the node and its node_dirty_ok()
status can reduce the number of calle to node_dirty_ok().
[akpm@linux-foundation.org: rename last_pgdat_dirty_limit to last_pgdat_dirty_ok]
Link: https://lkml.kernel.org/r/20220430011032.64071-1-vvghjk1234@gmail.com
Signed-off-by: Wonhyuk Yang <vvghjk1234@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Donghyeok Kim <dthex5d@gmail.com>
Cc: JaeSang Yoo <jsyoo5b@gmail.com>
Cc: Jiyoup Kim <lakroforce@gmail.com>
Cc: Ohhoon Kwon <ohkwon1043@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Tue, 10 May 2022 01:20:56 +0000 (18:20 -0700)]
Docs/admin-guide/mm/damon/reclaim: document 'commit_inputs' parameter
This commit documents the new DAMON_RECLAIM parameter, 'commit_inputs' in
its usage document.
Link: https://lkml.kernel.org/r/20220429160606.127307-15-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Tue, 10 May 2022 01:20:56 +0000 (18:20 -0700)]
mm/damon/reclaim: support online inputs update
DAMON_RECLAIM reads the user input parameters only when it starts. To
allow more efficient online tuning, this commit implements a new input
parameter called 'commit_inputs'. Writing true to the parameter makes
DAMON_RECLAIM reads the input parameters again.
Link: https://lkml.kernel.org/r/20220429160606.127307-14-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Tue, 10 May 2022 01:20:56 +0000 (18:20 -0700)]
Docs/{ABI,admin-guide}/damon: Update for 'state' sysfs file input keyword, 'commit'
This commit documents the newly added 'state' sysfs file input keyword,
'commit', which allows online tuning of DAMON contexts.
Link: https://lkml.kernel.org/r/20220429160606.127307-13-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>