OSDN Git Service
Daniel Vetter [Thu, 22 May 2014 15:56:31 +0000 (17:56 +0200)]
drm/i915: Add fifo underrun reporting state to debugfs
On platforms with shared interrupt enable bits (which are shared even
with the pipe CRC logic) there's some tricky corner cases. Add
information to make debugging those easier.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Fri, 30 May 2014 16:29:48 +0000 (12:29 -0400)]
drm: add drm_fb_helper_restore_fbdev_mode_unlocked()
All drm_fb_helper_restore_fbdev_mode() call sites, save one, do the same
locking. Simplify this into drm_fb_helper_restore_fbdev_mode_unlocked().
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Rob Clark [Tue, 19 Nov 2013 17:10:12 +0000 (12:10 -0500)]
drm: convert crtc and connection_mutex to ww_mutex (v5)
For atomic, it will be quite necessary to not need to care so much
about locking order. And 'state' gives us a convenient place to stash a
ww_ctx for any sort of update that needs to grab multiple crtc locks.
Because we will want to eventually make locking even more fine grained
(giving locks to planes, connectors, etc), split out drm_modeset_lock
and drm_modeset_acquire_ctx to track acquired locks.
Atomic will use this to keep track of which locks have been acquired
in a transaction.
v1: original
v2: remove a few things not needed until atomic, for now
v3: update for v3 of connection_mutex patch..
v4: squash in docbook
v5: doc tweaks/fixes
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 4 Jun 2014 06:02:28 +0000 (16:02 +1000)]
drm/dp: add a hw mutex around the transfer functions. (v2)
This should avoid races between connector probing and HPD
irqs in the future, currently mode_config.mutex blocks this
possibility.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 4 Jun 2014 05:47:41 +0000 (15:47 +1000)]
Merge tag 'topic/core-stuff-2014-06-02' of git://anongit.freedesktop.org/drm-intel into drm-next
Just flushing out my pile of random drm patches for the merge window,
nothing big. And it all hung around in drm-intel trees for a while (only
just rebased now).
* tag 'topic/core-stuff-2014-06-02' of git://anongit.freedesktop.org/drm-intel:
imx-drm: imx-tve: remove unused variable
drm: Missed clflushopt in drm_clflush_virt_range
drm/plane: Fix a couple of checkpatch warnings
drm/plane: Fix sparse warnings
drm/exynos: Fix double locks at PM resume
drm/ast: Fix double lock at PM resume
drm/dp-helper: Deprecate old i2c-over-dp_aux heleprs
Dave Airlie [Wed, 4 Jun 2014 03:41:11 +0000 (13:41 +1000)]
Merge branch 'exynos-drm-next' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next
Summary:
- Resolve probe order and deferred probe issue with component framework
support.
- Resolve hdmi dt broken issue.
. HDMI DT support, which was broken since CCF (common clock framework)
support, and considring legacy dt binding.
- Consolidate HDMI part.
. APB based phy support for Exynos5420 and later, and fixups related
to power on/off sequence.
- Consolidate IPP part.
. Mostly bug fixups and code cleanups.
- Trivial fixups and code cleanups.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (64 commits)
drm/exynos: consider deferred probe case
drm/exynos: remove unnecessary exynos_hdmi.h file
drm/exynos/fimd: allow multiplatform configuration
drm/exynos: add hdmiphy power on/off sequence
drm/exynos: ipp: remove description of non-existing field
drm/exynos: ipp: update comment for struct drm_ipp_buf_info
drm/exynos: ipp: rearrange c_node->event_lock using routine
drm/exynos: ipp: rearrange c_node->mem_lock using routines
drm/exynos: ipp: add ipp_remove_id()
drm/exynos: ipp: add cmd_lock for cmd_list
drm/exynos: ipp: rename cmd_lock to lock
drm/exynos: ipp: remove duplicated setting
drm/exynos: ipp: remove usless list_empty() functions
drm/exynos: Use PTR_ERR_OR_ZERO in exynos_dp_core.c
drm/exynos: remove hardware overlays disable from fimd probe
drm/exynos: Fix checkpatch warning in exynos_dp_reg.c
drm/exynos: add fimd dependency to fimd related encoders
drm/exynos: remove redundant mutex_unlock
drm/exynos/fimc: simplify and rename fimc_dst_get_buf_seq
drm/exynos/fimc: replace mutex by spinlock
...
Dave Airlie [Wed, 4 Jun 2014 03:39:12 +0000 (13:39 +1000)]
Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next
Pretty small pull this time around for msm. Adds some useful debugfs
I'd been carrying around on a branch for a while, plus few fixes. And
Kconfig update for the great ARCH_MSM -> ARCH_QCOM split.
* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
drm/msm: use correct gfp flag for vram allocation
drm/msm/mdp5: fix error return value
drm/msm: remove redundant private plane cleanup
drm/msm: add perf logging debugfs
drm/msm: add rd logging debugfs
drm/msm: update for ARCH_MSM -> ARCH_QCOM
drm/msm/hdmi: use gpio and HPD polling
drm/msm/mdp5: fix crash in error/unload paths
Daniel Vetter [Tue, 3 Jun 2014 17:30:45 +0000 (19:30 +0200)]
drm: Move plane helpers into drm_kms_helper.ko
The drm core shouldn't depend upon any helpers, and we make sure this
doesn't accidentally happen by moving them into the helper-only
drm_kms_helper.ko module.
v2: Don't break the build for vmwgfx, spotted by Matt.
v3: Unbreak the depency loop around CONFIG_FB (not actually a loop
since it involves select). Reported by Chris.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter [Thu, 29 May 2014 21:54:47 +0000 (23:54 +0200)]
drm: Split connection_mutex out of mode_config.mutex (v3)
After the split-out of crtc locks from the big mode_config.mutex
there's still two major areas it protects:
- Various connector probe states, like connector->status, EDID
properties, probed mode lists and similar information.
- The links from connector->encoder and encoder->crtc and other
modeset-relevant connector state (e.g. properties which control the
panel fitter).
The later is used by modeset operations. But they don't really care
about the former since it's allowed to e.g. enable a disconnected VGA
output or with a mode not in the probed list.
Thus far this hasn't been a problem, but for the atomic modeset
conversion Rob Clark needs to convert all modeset relevant locks into
w/w locks. This is required because the order of acquisition is
determined by how userspace supplies the atomic modeset data. This has
run into troubles in the detect path since the i915 load detect code
needs _both_ protections offered by the mode_config.mutex: It updates
probe state and it needs to change the modeset configuration to enable
the temporary load detect pipe.
The big deal here is that for the probe/detect users of this lock a
plain mutex fits best, but for atomic modesets we really want a w/w
mutex. To fix this lets split out a new connection_mutex lock for the
modeset relevant parts.
For simplicity I've decided to only add one additional lock for all
connector/encoder links and modeset configuration states. We have
piles of different modeset objects in addition to those (like bridges
or panels), so adding per-object locks would be much more effort.
Also, we're guaranteed (at least for now) to do a full modeset if we
need to acquire this lock. Which means that fine-grained locking is
fairly irrelevant compared to the amount of time the full modeset will
take.
I've done a full audit, and there's just a few things that justify
special focus:
- Locking in drm_sysfs.c is almost completely absent. We should
sprinkle mode_config.connection_mutex over this file a bit, but
since it already lacks mode_config.mutex this patch wont make the
situation any worse. This is material for a follow-up patch.
- omap has a omap_framebuffer_flush function which walks the
connector->encoder->crtc links and is called from many contexts.
Some look like they don't acquire mode_config.mutex, so this is
already racy. Again fixing this is material for a separate patch.
- The radeon hot_plug function to retrain DP links looks at
connector->dpms. Currently this happens without any locking, so is
already racy. I think radeon_hotplug_work_func should gain
mutex_lock/unlock calls for the mode_config.connection_mutex.
- Same applies to i915's intel_dp_hot_plug. But again, this is already
racy.
- i915 load_detect code needs to acquire this lock. Which means the
w/w dance due to Rob's work will be nicely contained to _just_ this
function.
I've added fixme comments everywhere where it looks suspicious but in
the sysfs code. After a quick irc discussion with Dave Airlie it
sounds like the lack of locking in there is due to sysfs cleanup fun
at module unload.
v1: original (only compile tested)
v2: missing mutex_init(), etc (from Rob Clark)
v3: i915 needs more care in the conversion:
- Protect the edp pp logic with the connection_mutex.
- Use connection_mutex in the backlight code due to
get_pipe_from_connector.
- Use drm_modeset_lock_all in suspend/resume paths.
- Update lock checks in the overlay code.
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Tue, 18 Mar 2014 14:07:08 +0000 (10:07 -0400)]
drm: spiff out FB refcnting traces
I find myself making this change locally whenever debugging FB reference
counting. Which seems a bit silly.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Rob Clark [Thu, 13 Sep 2012 03:22:31 +0000 (22:22 -0500)]
drm: add signed-range property type
Like range, but values are signed.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Rob Clark [Fri, 30 May 2014 15:37:03 +0000 (11:37 -0400)]
drm: add object property type
An object property is an id (idr) for a drm mode object. This
will allow a property to be used set/get a framebuffer, CRTC, etc.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Fri, 30 May 2014 15:34:01 +0000 (11:34 -0400)]
drm: add extended property types
If we continue to use bitmask for type, we will quickly run out of room
to add new types. Split this up so existing part of bitmask range
continues to function as before, but reserve a chunk of the remaining
space for an integer type-id. Wrap this all up in some type-check
helpers to keep the backwards-compat uglyness contained.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Sat, 5 Oct 2013 20:36:52 +0000 (16:36 -0400)]
drm: helpers to find mode objects
Add a few more useful helpers to find mode objects.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 3 Jun 2014 11:56:23 +0000 (14:56 +0300)]
drm: drop drm_get_connector_name() and drm_get_encoder_name()
No longer used or needed as the structs have a name field.
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jani Nikula [Tue, 3 Jun 2014 11:56:22 +0000 (14:56 +0300)]
drm: replace drm_get_encoder_name() with direct name field use
Generated using semantic patch:
@@
expression E;
@@
- drm_get_encoder_name(E)
+ E->name
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jani Nikula [Tue, 3 Jun 2014 11:56:21 +0000 (14:56 +0300)]
drm/i915: replace drm_get_encoder_name() with direct name field use
Generated using semantic patches:
@@
expression E;
@@
- drm_get_encoder_name(&E)
+ E.name
@@
expression E;
@@
- drm_get_encoder_name(E)
+ E->name
v2: Turn drm_get_encoder_name(&E) into E.name instead of &(E)->name.
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jani Nikula [Tue, 3 Jun 2014 11:56:20 +0000 (14:56 +0300)]
drm: replace drm_get_connector_name() with direct name field use
Generated using semantic patch:
@@
expression E;
@@
- drm_get_connector_name(E)
+ E->name
[airlied: regenerated]
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jani Nikula [Tue, 3 Jun 2014 11:56:19 +0000 (14:56 +0300)]
drm/radeon: replace drm_get_connector_name() with direct name field use
Generated using semantic patch:
@@
expression E;
@@
- drm_get_connector_name(E)
+ E->name
[airlied: regenerated]
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jani Nikula [Tue, 3 Jun 2014 11:56:18 +0000 (14:56 +0300)]
drm/nouveau: replace drm_get_connector_name() with direct name field use
Generated using semantic patches:
@@
expression E;
@@
- drm_get_connector_name(&E)
+ E.name
@@
expression E;
@@
- drm_get_connector_name(E)
+ E->name
v2: Turn drm_get_connector_name(&E) into E.name instead of &(E)->name.
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jani Nikula [Tue, 3 Jun 2014 11:56:17 +0000 (14:56 +0300)]
drm/i915: replace drm_get_connector_name() with direct name field use
Generated using semantic patches:
@@
expression E;
@@
- drm_get_connector_name(&E)
+ E.name
@@
expression E;
@@
- drm_get_connector_name(E)
+ E->name
v2: Turn drm_get_connector_name(&E) into E.name instead of &(E)->name.
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jani Nikula [Tue, 3 Jun 2014 11:56:16 +0000 (14:56 +0300)]
staging: imx-drm-core: replace drm_get_connector_name() with direct name field use
Generated using semantic patch:
@@
expression E;
@@
- drm_get_connector_name(E)
+ E->name
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
David Mansfield [Wed, 4 Jun 2014 02:12:15 +0000 (12:12 +1000)]
drm/qxl: use surface_id 0 for primary surface on all monitors
spice-server and downstream code expect that the primary surface
will always have surface_id = 0, while in reality, once allocated, the
surface_id in qxl.ko is NEVER 0. In a dual head environment, all
monitors render portions of the primary surface.
However, when the monitor config events are generated and sent,
the primary surface is only mapped to the correct identifier
(i.e. 0) for the primary head (where crtc index is 0).
The fix is to look at the "primary" flag in the bo and always
use id 0, irrespective of which head is being configured.
[airlied: qxl hw really needs to be fixed to scanout surfaces]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König [Tue, 3 Jun 2014 22:13:21 +0000 (18:13 -0400)]
drm/radeon: rework page flip handling v4
Instead of trying to flip inside the vblank period when
the buffer is idle, offload blocking for idle to a kernel
thread and program the flip directly into the hardware.
v2: add error handling, fix EBUSY handling
v3: add proper exclusive_lock handling
v4: update crtc->primary->fb when the flip actually happens
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 4 Jun 2014 01:59:31 +0000 (11:59 +1000)]
Revert "drm/radeon: rework page flip handling v3"
This reverts commit
1aab5514ca9604e0263f658a067da0189c86a35b.
Apply the fixed up version instead.
Dave Airlie [Tue, 3 Jun 2014 00:34:29 +0000 (10:34 +1000)]
Merge branch 'drm-next-3.16' of git://people.freedesktop.org/~agd5f/linux into drm-next
Highlights:
- GPUVM opimtizations
- HDMI audio cleanups
- Deep color HDMI support
- more bug fixes, cleanups
* 'drm-next-3.16' of git://people.freedesktop.org/~agd5f/linux: (29 commits)
drm/edid: Add quirk for Sony PVM-2541A to get 12 bpc hdmi deep color.
drm/edid: Parse and handle HDMI deep color modes.
drm/radeon: Limit hdmi deep color bit depth to 12 bpc.
drm/radeon: Setup HDMI_CONTROL for hdmi deep color gcp's (v2)
drm/radeon: fix pll setup for hdmi deep color (v7)
drm/radeon: use hw cts/n values for deep color
drm/radeon: only apply hdmi bpc pll flags when encoder mode is hdmi
drm/radeon/atom: fix dithering on certain panels
drm/radeon: optimize CIK VM handling v2
drm/radeon: optimize SI VM handling
drm/radeon: add define for flags used in R600+ GTT
drm/radeon: rework page flip handling v3
drm/radeon: separate vblank and pflip crtc handling
drm/radeon: split page flip and pending callback
drm/radeon: remove drm_vblank_get|put from pflip handling
drm/radeon: remove (pre|post)_page_flip callbacks
drm/radeon/dp: fix lane/clock setup for dp 1.2 capable devices
drm/radeon: fix typo in radeon_connector_is_dp12_capable()
radeon: Remove useless quirk for zx1/FireGL X1 combo introduced with fdo #7770
vgaswitcheroo: switch the mux to the igp on power down when runpm is enabled
...
Mario Kleiner [Fri, 23 May 2014 19:40:55 +0000 (21:40 +0200)]
drm/edid: Add quirk for Sony PVM-2541A to get 12 bpc hdmi deep color.
The Sony PVM-2541A OLED high precision color display supports
both 10 bpc and 12 bpc hdmi deep color input, but its edid
does not signal any deep color support.
Add a quirk to force it being treated as a 12 bpc panel.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Kleiner [Thu, 27 Mar 2014 18:59:39 +0000 (19:59 +0100)]
drm/edid: Parse and handle HDMI deep color modes.
Check the HDMI cea block for deep color mode bits. If available,
assign the highest supported bpc for a hdmi display, corresponding
to the given deep color modes.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Kleiner [Mon, 5 May 2014 21:03:18 +0000 (23:03 +0200)]
drm/radeon: Limit hdmi deep color bit depth to 12 bpc.
DCE-4/5/6 can't support more than 12 bpc deep color over hdmi,
so clamp to 12 bpc when a hdmi deep color capable display is
connected. This even makes sense on DCE-8+, which could do up
to 16 bpc, as driving with more than 12 bpc would only waste
video bandwidth as long as we don't support framebuffers with
more than 12 bpc depth.
On pre-DCE4 we clamp hdmi bit depth to 8 bpc, as those asics
don't support hdmi deep color.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 28 May 2014 23:14:36 +0000 (19:14 -0400)]
drm/radeon: Setup HDMI_CONTROL for hdmi deep color gcp's (v2)
Program HDMI_CONTROL to send general control packets
for hdmi deep color mode signalling at every video
frame if bpc > 8.
This is only supported on evergreen / DCE-4 and later.
v2: rebase
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 22 Apr 2014 02:09:19 +0000 (22:09 -0400)]
drm/radeon: fix pll setup for hdmi deep color (v7)
Need to adjust the pll up for deep color modes.
Additionally, the atom bpc defines were wrong in certain
cases.
v2: set the adjusted clock to the pll clock for hdmi deep
color. This fixes display and audio issues with deep color
as reported by Andy Furniss <adf.lists@gmail.com>
v3: set crtc_clock as well
v4: setcrtcinfo on the adjusted mode
v5: just use the adjusted clock for setting the pll
v6: only use the adjusted clock for hdmi
v7: only DCE5 and DCE6 and bpc > 8
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 28 May 2014 23:02:31 +0000 (19:02 -0400)]
drm/radeon: use hw cts/n values for deep color
I'm not really sure how these should be calculated
for deep color. The hw generated values seem to work.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 22 Apr 2014 01:45:09 +0000 (21:45 -0400)]
drm/radeon: only apply hdmi bpc pll flags when encoder mode is hdmi
May fix display issues with non-HDMI displays.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Tue, 27 May 2014 20:40:51 +0000 (16:40 -0400)]
drm/radeon/atom: fix dithering on certain panels
We need to specify the encoder mode as LVDS for eDP
when using the Crtc_Source atom table in order to properly
set up the FMT hardware.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73911
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Christian König [Tue, 27 May 2014 18:10:28 +0000 (20:10 +0200)]
drm/radeon: optimize CIK VM handling v2
Fill VM page tables from the GART page table if applicable.
v2: fix copy&paste error
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 27 May 2014 14:47:38 +0000 (16:47 +0200)]
drm/radeon: optimize SI VM handling
Fill VM page tables from the GART page table if applicable.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 27 May 2014 14:47:37 +0000 (16:47 +0200)]
drm/radeon: add define for flags used in R600+ GTT
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 27 May 2014 14:49:22 +0000 (16:49 +0200)]
drm/radeon: rework page flip handling v3
Instead of trying to flip inside the vblank period when
the buffer is idle, offload blocking for idle to a kernel
thread and program the flip directly into the hardware.
v2: add error handling, fix EBUSY handling
v3: add proper exclusive_lock handling
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 27 May 2014 14:49:21 +0000 (16:49 +0200)]
drm/radeon: separate vblank and pflip crtc handling
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 27 May 2014 14:49:20 +0000 (16:49 +0200)]
drm/radeon: split page flip and pending callback
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 27 May 2014 14:49:19 +0000 (16:49 +0200)]
drm/radeon: remove drm_vblank_get|put from pflip handling
We activate the VBLANK irq manually anyway, so this is unnecessary.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 27 May 2014 14:49:18 +0000 (16:49 +0200)]
drm/radeon: remove (pre|post)_page_flip callbacks
They are doing the same on all generations anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 27 May 2014 17:48:05 +0000 (13:48 -0400)]
drm/radeon/dp: fix lane/clock setup for dp 1.2 capable devices
Only DCE5+ asics support DP 1.2.
Noticed by ArtForz on IRC.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Tue, 27 May 2014 17:11:36 +0000 (13:11 -0400)]
drm/radeon: fix typo in radeon_connector_is_dp12_capable()
We were checking the ext clock rather than the display clock.
Noticed by ArtForz on IRC.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Émeric MASCHINO [Fri, 23 May 2014 15:02:24 +0000 (11:02 -0400)]
radeon: Remove useless quirk for zx1/FireGL X1 combo introduced with fdo #7770
Removes useless quirk
a7f465f73363fce409870f62173d518b1bc02ae6 introduced with
fdo #7770 as a failed attempt to minimize stability issues with hp zx1 chipset/
ATI FireGL X1 graphics adapter configuration
(see http://marc.info/?l=linux-ia64&m=
140077543819871&w=2 for details/reason)
Signed-off-by: Émeric MASCHINO <emeric.maschino@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 19 May 2014 18:04:43 +0000 (14:04 -0400)]
vgaswitcheroo: switch the mux to the igp on power down when runpm is enabled
Avoids blank screens on muxed systems when runpm is active.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=75917
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Michele CURTI [Mon, 19 May 2014 15:23:55 +0000 (11:23 -0400)]
drm/radeon: use NULL instead of zero in clearstate headers
Signed-off-by: Michele Curti <michele.curti@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michele CURTI [Mon, 19 May 2014 15:18:52 +0000 (11:18 -0400)]
drm/radeon: use NULL instead of zero in object functions
Signed-off-by: Michele Curti <michele.curti@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rafał Miłecki [Fri, 16 May 2014 09:10:31 +0000 (11:10 +0200)]
drm/radeon/hdmi: DCE2: simplify audio workaround
Thanks to advanced RE of fglrx we finally know what exactly needs to be
handled of AFMT change.
This has been tested for possible regressions on:
1) DCE2 HD2400 (RV610)
2) DCE3 HD3470 (RV620)
For a reference and details see:
https://bugzilla.kernel.org/show_bug.cgi?id=76231
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rafał Miłecki [Fri, 16 May 2014 09:10:30 +0000 (11:10 +0200)]
drm/radeon/hdmi: DCE2: update setmode
Recent RE efforts revealed ops performed by fglrx during HDMI setup.
This mostly adds masks to r/w ops plus few single missing bits.
This has been tested for possible regressions on:
1) DCE2 HD2400 (RV610)
2) DCE3 HD3470 (RV620)
For a reference and details see:
https://bugzilla.kernel.org/show_bug.cgi?id=76231
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rafał Miłecki [Fri, 16 May 2014 09:10:29 +0000 (11:10 +0200)]
drm/radeon/hdmi: DCE3: clean ACR control
What initially seemed to be a typo in fglrx (using register 0x740c
instead of 0x74dc) appeared to be a correct behavior. DCE3 has ACR and
CRC registers swapped which explains why we needed
WREG32(HDMI0_AUDIO_CRC_CONTROL + offset, 0x1000);
This has been tested for possible regressions on DCE3 HD3470 (RV620).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rafał Miłecki [Fri, 16 May 2014 09:36:24 +0000 (11:36 +0200)]
drm/radeon/hdmi: use separated file for DCE 3.1/3.2 code
DCE 3.1 and 3.2 should be programmed in a different way than DCE 2 and
DCE 3. The order of setting registers and sets of registers are
different.
It's still unsure how we will handle DCE 3.1 vs. DCE 3.2, since they
have few differences as well.
For now separate DCE 2 and DCE 3 path, so we can work on it without a
risk of breaking DCE 3.1+.
This has been tested for possible regressions on DCE32 HD4550 (RV710).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Sat, 10 May 2014 10:17:56 +0000 (12:17 +0200)]
drm/radeon: add proper support for RADEON_VM_BLOCK_SIZE v2
This patch makes it possible to decide how many address
bits are spend on the page directory vs the page tables.
v2: remove unintended change
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Sat, 10 May 2014 10:17:55 +0000 (12:17 +0200)]
drm/radeon: add large PTE support for NI, SI and CIK v5
This patch implements support for VRAM page table entry compression.
PTE construction is enhanced to identify physically contiguous page
ranges and mark them in the PTE fragment field. L1/L2 TLB support is
enabled for 64KB (SI/CIK) and 256KB (NI) PTE fragments, significantly
improving TLB utilization for VRAM allocations.
Linear store bandwidth is improved from 60GB/s to 125GB/s on Pitcairn.
Unigine Heaven 3.0 sees an average improvement from 24.7 to 27.7 FPS
on default settings at 1920x1200 resolution with vsync disabled.
See main comment in radeon_vm.c for a technical description.
v2 (chk): rebased and simplified.
v3 (chk): add missing hw setup
v4 (chk): rebased on current drm-fixes-3.15
v5 (chk): fix comments and commit text
Signed-off-by: Jay Cornwall <jay@jcornwall.me>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 8 May 2014 14:58:04 +0000 (10:58 -0400)]
drm/radeon: add a i2c bus mutex
The i2c and aux buses use the same pads so add
a mutex to protect access to the pads.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Rob Clark [Mon, 2 Jun 2014 11:25:56 +0000 (07:25 -0400)]
drm/msm: use correct gfp flag for vram allocation
We want at least __GFP_WAIT, otherwise dma-mapping tries to use coherent
pool rather than CMA pool.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Mon, 2 Jun 2014 11:24:27 +0000 (07:24 -0400)]
drm/msm/mdp5: fix error return value
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Mon, 2 Jun 2014 11:22:29 +0000 (07:22 -0400)]
drm/msm: remove redundant private plane cleanup
Now that drm core knows about private planes, it cleans them up for us.
Trying to do this twice results in badness.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 30 May 2014 18:49:43 +0000 (14:49 -0400)]
drm/msm: add perf logging debugfs
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 30 May 2014 18:47:38 +0000 (14:47 -0400)]
drm/msm: add rd logging debugfs
To ease debugging, add debugfs file which can be cat/tail'd to log
submits, along with fence #. If GPU hangs, you can look at 'gpu'
debugfs file to find last completed fence and current register state,
and compare with logged rd file to narrow down the DRAW_INDX which
triggered the GPU hang.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Dave Airlie [Mon, 2 Jun 2014 09:55:04 +0000 (19:55 +1000)]
Merge tag 'drm-intel-next-2014-05-23' of git://anongit.freedesktop.org/drm-intel into drm-next
- prep refactoring for execlists (Oscar Mateo)
- corner-case fixes for runtime pm (Imre)
- tons of vblank improvements from Ville
- prep work for atomic plane/sprite updates (Ville)
- more chv code, now almost complete (tons of different people)
- refactoring and improvements for drm_irq.c merged through drm-intel-next
- g4x/ilk reset improvements (Ville)
- removal of encoder->mode_set
- moved audio state tracking into pipe_config
- shuffled fb pinning out of the platform crtc modeset callbacks into core code
- userptr support (Chris)
- OOM handling improvements from Chris, with now have a neat oom notifier which
jumps additional debug information.
- topdown allocation of ppgtt PDEs (Ben)
- fixes and small improvements all over
* tag 'drm-intel-next-2014-05-23' of git://anongit.freedesktop.org/drm-intel: (187 commits)
drm/i915: Kill private_default_ctx off
drm/i915: s/i915_hw_context/intel_context
drm/i915: Split the ringbuffers from the rings (3/3)
drm/i915: Split the ringbuffers from the rings (2/3)
drm/i915: Split the ringbuffers from the rings (1/3)
drm/i915: s/intel_ring_buffer/intel_engine_cs
drm/i915: disable GT power saving early during system suspend
drm/i915: fix possible RPM ref leaking during RPS disabling
drm/i915: remove user GTT mappings early during runtime suspend
drm/i915: Implement WaVcpClkGateDisableForMediaReset:ctg, elk
drm/i915: Fix gen2 and hsw+ scanline counter
drm/i915: Draw a picture about video timings
drm/i915: Improve gen3/4 frame counter
drm/i915: Add a small adjustment to the pixel counter on interlaced modes
drm/i915: Hold CRTC lock whilst freezing the planes
drm/i915: Only discard backing storage on releasing the last ref
drm/i915: Wait for pending page flips before enabling/disabling the primary plane
drm/i915: grab the audio power domain when enabling audio on HSW+
drm/i915: don't read HSW_AUD_PIN_ELD_CP_VLD when the power well is off
drm/i915: move bsd dispatch index somewhere better
...
Vincent Stehlé [Sun, 25 May 2014 21:54:14 +0000 (23:54 +0200)]
imx-drm: imx-tve: remove unused variable
Commit
f9b0e251dfbf 'drm: make mode_valid callback optional' left variable ret
unused; remove it.
This fixes the following compilation warning:
drivers/staging/imx-drm/imx-tve.c: In function ‘imx_tve_connector_mode_valid’:
drivers/staging/imx-drm/imx-tve.c:252:6: warning: unused variable ‘ret’ [-Wunused-variable]
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ross Zwisler [Wed, 14 May 2014 15:41:12 +0000 (09:41 -0600)]
drm: Missed clflushopt in drm_clflush_virt_range
With this commit:
2a0788dc9bc4 x86: Use clflushopt in drm_clflush_virt_range
If clflushopt is available on the system, we use it instead of clflush
in drm_clflush_virt_range. There were two calls to clflush in this
function, but only one was changed to clflushopt. This patch changes
the other clflush call to clflushopt.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: H Peter Anvin <h.peter.anvin@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thierry Reding [Tue, 13 May 2014 14:58:35 +0000 (16:58 +0200)]
drm/plane: Fix a couple of checkpatch warnings
Code should be indented using tabs rather than spaces (see CodingStyle)
and the canonical form to declare a constant static variable is using
"static const" rather than "const static". Fixes the following warnings
from checkpatch:
$ scripts/checkpatch.pl -f drivers/gpu/drm/drm_plane_helper.c
WARNING: storage class should be at the beginning of the declaration
#40: FILE: drivers/gpu/drm/drm_plane_helper.c:40:
+const static uint32_t safe_modeset_formats[] = {
WARNING: please, no spaces at the start of a line
#41: FILE: drivers/gpu/drm/drm_plane_helper.c:41:
+ DRM_FORMAT_XRGB8888,$
WARNING: please, no spaces at the start of a line
#42: FILE: drivers/gpu/drm/drm_plane_helper.c:42:
+ DRM_FORMAT_ARGB8888,$
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Thierry Reding [Tue, 13 May 2014 10:47:42 +0000 (12:47 +0200)]
drm/plane: Fix sparse warnings
Include the drm_plane_helper.h header file to fix the following sparse
warnings:
CHECK drivers/gpu/drm/drm_plane_helper.c
drivers/gpu/drm/drm_plane_helper.c:102:5: warning: symbol 'drm_primary_helper_update' was not declared. Should it be static?
drivers/gpu/drm/drm_plane_helper.c:219:5: warning: symbol 'drm_primary_helper_disable' was not declared. Should it be static?
drivers/gpu/drm/drm_plane_helper.c:233:6: warning: symbol 'drm_primary_helper_destroy' was not declared. Should it be static?
drivers/gpu/drm/drm_plane_helper.c:241:30: warning: symbol 'drm_primary_helper_funcs' was not declared. Should it be static?
drivers/gpu/drm/drm_plane_helper.c:259:18: warning: symbol 'drm_primary_helper_create_plane' was not declared. Should it be static?
Doing that makes gcc complain as follows:
CC drivers/gpu/drm/drm_plane_helper.o
drivers/gpu/drm/drm_plane_helper.c:260:19: error: conflicting types for 'drm_primary_helper_create_plane'
struct drm_plane *drm_primary_helper_create_plane(struct drm_device *dev,
^
In file included from drivers/gpu/drm/drm_plane_helper.c:29:0:
include/drm/drm_plane_helper.h:42:19: note: previous declaration of 'drm_primary_helper_create_plane' was here
struct drm_plane *drm_primary_helper_create_plane(struct drm_device *dev,
^
drivers/gpu/drm/drm_plane_helper.c: In function 'drm_primary_helper_create_plane':
drivers/gpu/drm/drm_plane_helper.c:274:11: warning: assignment discards 'const' qualifier from pointer target type
formats = safe_modeset_formats;
^
In file included from include/linux/linkage.h:6:0,
from include/linux/kernel.h:6,
from include/drm/drmP.h:45,
from drivers/gpu/drm/drm_plane_helper.c:27:
drivers/gpu/drm/drm_plane_helper.c: At top level:
drivers/gpu/drm/drm_plane_helper.c:289:15: error: conflicting types for 'drm_primary_helper_create_plane'
EXPORT_SYMBOL(drm_primary_helper_create_plane);
^
include/linux/export.h:57:21: note: in definition of macro '__EXPORT_SYMBOL'
extern typeof(sym) sym; \
^
drivers/gpu/drm/drm_plane_helper.c:289:1: note: in expansion of macro 'EXPORT_SYMBOL'
EXPORT_SYMBOL(drm_primary_helper_create_plane);
^
In file included from drivers/gpu/drm/drm_plane_helper.c:29:0:
include/drm/drm_plane_helper.h:42:19: note: previous declaration of 'drm_primary_helper_create_plane' was here
struct drm_plane *drm_primary_helper_create_plane(struct drm_device *dev,
^
Which can easily be fixed by making the signatures of the implementation
and the prototype match.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Takashi Iwai [Fri, 9 May 2014 06:14:15 +0000 (08:14 +0200)]
drm/exynos: Fix double locks at PM resume
The recent commit [
3ea87855: drm/helper: lock all around force mode
restore] introduced drm_modeset_lock_all() in
drm_helper_resume_force_mode() itself, while exynos driver takes this
lock before calling it. Move the function call outside the lock for
avoiding a deadlock.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Takashi Iwai [Fri, 9 May 2014 06:14:14 +0000 (08:14 +0200)]
drm/ast: Fix double lock at PM resume
The recent commit [
3ea87855: drm/helper: lock all around force mode
restore] introduced drm_modeset_lock_all() in
drm_helper_resume_force_mode() itself, while ast driver still takes
this lock before calling it. Remove the caller side lock for avoid a
fatal deadlock.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 7 May 2014 08:23:55 +0000 (10:23 +0200)]
drm/dp-helper: Deprecate old i2c-over-dp_aux heleprs
Only gma500 is still using this, once that's converted we can kill all
this code. If that conversion doesn't happen soonish I think we should
just move this helper code into the gma500 driver itself to avoid
abuse from new drivers.
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Inki Dae [Thu, 29 May 2014 09:28:02 +0000 (18:28 +0900)]
drm/exynos: consider deferred probe case
This patch makes sure that exynos drm framework handles deferred
probe case correctly.
Sub drivers could be probed before resources, clock, regulator,
phy or panel, are ready for them so we should make sure that exynos
drm core waits until all resources are ready and sub drivers are
probed correctly.
Chagelog v2:
- Make sure that exynos drm core tries to bind sub drivers only in case that
they have a pair: crtc and encoder/connector components should be a pair.
- Remove unnecessary patch:
drm/exynos: mipi-dsi: consider panel driver-deferred probe
- Return error type correctly.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Jingoo Han [Fri, 30 May 2014 02:12:08 +0000 (11:12 +0900)]
drm/exynos: remove unnecessary exynos_hdmi.h file
The exynos_hdmi.h has been used for the dedicated i2c drivers
that were already removed. Thus, the unnecessary exynos_hdmi.h
should be removed.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Fri, 23 May 2014 10:58:36 +0000 (12:58 +0200)]
drm/exynos/fimd: allow multiplatform configuration
The patch removes dependency on !ARCH_MULTIPLATFORM.
This dependency seems to be not longer valid.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Shirish S [Thu, 3 Apr 2014 15:11:02 +0000 (20:41 +0530)]
drm/exynos: add hdmiphy power on/off sequence
This patch implements the power on/off sequence
of HDMI PHY in exynos5420 and exynos5250 as provided
by the hardware team.
This has been verified for mulitple iterations of
S2R.
Signed-off-by: Shirish S <s.shirish@samsung.com>
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Mon, 26 May 2014 08:17:23 +0000 (10:17 +0200)]
drm/exynos: ipp: remove description of non-existing field
ipp_id field is removed from exynos_drm_ippdrv struct.
The patch removes its description as well.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Mon, 26 May 2014 08:17:22 +0000 (10:17 +0200)]
drm/exynos: ipp: update comment for struct drm_ipp_buf_info
The attribute gem_objs in struct drm_exynos_ipp_buf_info was
changed to handles. So the comment needs to be updated also.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Mon, 26 May 2014 08:17:21 +0000 (10:17 +0200)]
drm/exynos: ipp: rearrange c_node->event_lock using routine
The c_node->event_list should be protected with
c_node->event_lock.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Mon, 26 May 2014 08:17:20 +0000 (10:17 +0200)]
drm/exynos: ipp: rearrange c_node->mem_lock using routines
The c_node->mem_list[] should be protected with
c_node->mem_lock.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Mon, 26 May 2014 08:17:19 +0000 (10:17 +0200)]
drm/exynos: ipp: add ipp_remove_id()
This patch adds ipp_remove_id() for idr resource free.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Mon, 26 May 2014 08:17:18 +0000 (10:17 +0200)]
drm/exynos: ipp: add cmd_lock for cmd_list
This patch adds cmd_lock for cmd_list synchronization.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Mon, 26 May 2014 08:17:17 +0000 (10:17 +0200)]
drm/exynos: ipp: rename cmd_lock to lock
The ippdrv->cmd_list requires cmd_lock.
So renames cmd_lock to lock for context.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Mon, 26 May 2014 08:17:16 +0000 (10:17 +0200)]
drm/exynos: ipp: remove duplicated setting
This patch removes duplicated setting.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Seong-Woo Kim <sw0312.cho@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
YoungJun Cho [Mon, 26 May 2014 08:17:15 +0000 (10:17 +0200)]
drm/exynos: ipp: remove usless list_empty() functions
list_for_each_entry() handles empty lists, so there is no
need to check whether the list is empty first.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Seong-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Sachin Kamat [Thu, 29 May 2014 05:56:24 +0000 (11:26 +0530)]
drm/exynos: Use PTR_ERR_OR_ZERO in exynos_dp_core.c
PTR_ERR_OR_ZERO simplifies the code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Rahul Sharma [Wed, 28 May 2014 06:11:11 +0000 (11:41 +0530)]
drm/exynos: remove hardware overlays disable from fimd probe
System hangs when FIMD registers are accessed to disable
hardware overlays. This is because of the clocks which are
not enabled before register access.
'Hardware overlay disable' is cleaned from the FIMD probe.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Sachin Kamat [Thu, 22 May 2014 04:59:29 +0000 (10:29 +0530)]
drm/exynos: Fix checkpatch warning in exynos_dp_reg.c
Silences the following warning:
WARNING: space prohibited before semicolon
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Fri, 23 May 2014 10:59:28 +0000 (12:59 +0200)]
drm/exynos: add fimd dependency to fimd related encoders
DPI, DSI and DP drivers will not work without FIMD.
The patch adds appropriate dependencies in Kconfig.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Fri, 23 May 2014 10:57:54 +0000 (12:57 +0200)]
drm/exynos: remove redundant mutex_unlock
The patch fixes unlocking in exynos_drm_component_del.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Mon, 19 May 2014 10:54:10 +0000 (12:54 +0200)]
drm/exynos/fimc: simplify and rename fimc_dst_get_buf_seq
fimc_dst_get_buf_seq returns number of buffers
so the name should be fimc_dst_get_buf_count.
Function body has been simplified.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Mon, 19 May 2014 10:54:09 +0000 (12:54 +0200)]
drm/exynos/fimc: replace mutex by spinlock
Function fimc_dst_set_buf_seq is called by irq handler
so it should not use mutexes. This patch fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Mon, 19 May 2014 10:54:08 +0000 (12:54 +0200)]
drm/exynos/fimc: replace hw access macros with functions
HW access macros implicitly depended on presence of ctx local variable.
This patch replaces them with C functions.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Mon, 19 May 2014 10:54:07 +0000 (12:54 +0200)]
drm/exynos/fimc: simplify irq masking function
The name fimc_handle_irq suggests it is irq handler, but the function
is for irq mask configuration. The patch renames the function to
fimc_mask_irq and removes unused arguments.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Mon, 19 May 2014 10:54:06 +0000 (12:54 +0200)]
drm/exynos/fimc: simplify pre-scaler ratio calculation
The patch replaces dedicated function for scaling ratio
calculation by fls calls.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Mon, 19 May 2014 10:54:05 +0000 (12:54 +0200)]
drm/exynos/ipp: simplify property list allocation
prop_list is always allocated, so instead of allocating it dynamically
the pointer can be replaced by the structure itself.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Mon, 19 May 2014 10:54:04 +0000 (12:54 +0200)]
drm/exynos/ipp: correct ipp_id field initialization
prop_list.ipp_id field is not initialized properly.
The patch fixes it, additionally it removes redundant field from ippdrv.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Mon, 19 May 2014 10:54:03 +0000 (12:54 +0200)]
drm/exynos/ipp: fix get_property IOCTL
Due to incorrect assignment in EXYNOS_IPP_GET_PROPERTY
IOCTL handler this IOCTL did not work at all.
The patch fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Sachin Kamat [Thu, 22 May 2014 05:02:56 +0000 (10:32 +0530)]
drm/exynos: Staticize local symbols in exynos_hdmi.c
These symbols are local to this file.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Sachin Kamat [Thu, 22 May 2014 05:02:55 +0000 (10:32 +0530)]
drm/exynos: Remove duplicate inclusion of i2c.h
i2c.h was included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Sachin Kamat [Thu, 22 May 2014 05:02:54 +0000 (10:32 +0530)]
drm/exynos: Staticize exynos_dpi_of_find_panel_node
exynos_dpi_of_find_panel_node is local to this file.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae>
Jean Delvare [Tue, 20 May 2014 09:15:25 +0000 (11:15 +0200)]
drm/exynos: Fix PTN3460 dependency
The following configuration options combination:
CONFIG_DRM_EXYNOS_DP=y
CONFIG_DRM_PTN3460=m
currently leads to the following linker failure:
drivers/built-in.o: In function `exynos_drm_attach_lcd_bridge':
.../drivers/gpu/drm/exynos/exynos_dp_core.c:1004:
undefined reference to `ptn3460_init'
This is because ptn3460_init can't be implemented in a module while
its caller is built into the kernel. So add the proper dependency in
Kconfig so that the above can't happen.
I moved DRM_PTN3460 earlier in Kconfig, next to the I2C helper module
section, so that the user has a chance to select it before moving to
the Exynos-specific section.
IMHO the proper way to solve the problem would be to turn ptn3460 into
a clean I2C driver, similar to the other I2C helper chip drivers. It's
the only way to not sink into impossible-to-guess dependencies. Then
ptn3460 could even be moved together with the other I2C helper chip
drivers.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Rahul Sharma [Wed, 7 May 2014 11:25:22 +0000 (16:55 +0530)]
drm/exynos: use 4WORD dma burst length for small fbs
In case of exynos, setting dma-burst to 16Word causes permanent
tearing for very small buffers, e.g. cursor buffer. Burst Mode
switching, which is based on overlay size is not recommended as
overlay size varies a lot towards the end of the screen. This
causes unstable DMA which results into tearing again.
Rendering small buffers with lower burst size doesn't
cause any noticable performance overhead. 128 pixel width is
selected based on mulitple experiments with exynos5 SoCs.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Rahul Sharma [Tue, 20 May 2014 05:06:05 +0000 (10:36 +0530)]
drm/exynos: use regmap interface to set hdmiphy control bit in pmu
Exynos drm hdmi driver used to get dummy hdmiphy clock to
control the PMU bit for hdmiphy. This bit needs to be set
before setting any resolution to hdmi hardware. This was
handled using dummy hdmiphy clock which is removed here.
PMU is already defined as system controller for exynos
SoCs. Hdmi driver is modified to control the phy enable bit
inside PMU using regmap interfaces.
Devicetree binding document for hdmi is also updated.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>