OSDN Git Service
Shaun Pereira [Thu, 23 Jun 2005 05:15:01 +0000 (22:15 -0700)]
[X25]: Selective sub-address matching with call user data.
From: Shaun Pereira <spereira@tusc.com.au>
This is the first (independent of the second) patch of two that I am
working on with x25 on linux (tested with xot on a cisco router). Details
are as follows.
Current state of module:
A server using the current implementation (2.6.11.7) of the x25 module will
accept a call request/ incoming call packet at the listening x.25 address,
from all callers to that address, as long as NO call user data is present
in the packet header.
If the server needs to choose to accept a particular call request/ incoming
call packet arriving at its listening x25 address, then the kernel has to
allow a match of call user data present in the call request packet with its
own. This is required when multiple servers listen at the same x25 address
and device interface. The kernel currently matches ALL call user data, if
present.
Current Changes:
This patch is a follow up to the patch submitted previously by Andrew
Hendry, and allows the user to selectively control the number of octets of
call user data in the call request packet, that the kernel will match. By
default no call user data is matched, even if call user data is present.
To allow call user data matching, a cudmatchlength > 0 has to be passed
into the kernel after which the passed number of octets will be matched.
Otherwise the kernel behavior is exactly as the original implementation.
This patch also ensures that as is normally the case, no call user data
will be present in the Call accepted / call connected packet sent back to
the caller
Future Changes on next patch:
There are cases however when call user data may be present in the call
accepted packet. According to the X.25 recommendation (ITU-T 10/96)
section 5.2.3.2 call user data may be present in the call accepted packet
provided the fast select facility is used. My next patch will include this
fast select utility and the ability to send up to 128 octets call user data
in the call accepted packet provided the fast select facility is used. I
am currently testing this, again with xot on linux and cisco.
Signed-off-by: Shaun Pereira <spereira@tusc.com.au>
(With a fix from Alexey Dobriyan <adobriyan@gmail.com>)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
James Lamanna [Thu, 23 Jun 2005 05:12:57 +0000 (22:12 -0700)]
[EBTABLES]: vfree() checking cleanups
From: jlamanna@gmail.com
ebtables.c vfree() checking cleanups.
Signed-off by: James Lamanna <jlamanna@gmail.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nishanth Aravamudan [Thu, 23 Jun 2005 05:11:44 +0000 (22:11 -0700)]
[ATALK] aarp: replace schedule_timeout() with msleep()
From: Nishanth Aravamudan <nacc@us.ibm.com>
Use msleep() instead of schedule_timeout() to guarantee the task
delays as expected. The current code is not wrong, but it does not account for
early return due to signals, so I think msleep() should be appropriate.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chuck Short [Thu, 23 Jun 2005 05:10:23 +0000 (22:10 -0700)]
[IPV4]: Fix route.c gcc4 warnings
Signed-off by: Chuck Short <zulcss@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Moyer [Thu, 23 Jun 2005 05:05:59 +0000 (22:05 -0700)]
[NETPOLL]: allow multiple netpoll_clients to register against one interface
This patch provides support for registering multiple netpoll clients to the
same network device. Only one of these clients may register an rx_hook,
however. In practice, this restriction has not been problematic. It is
worth mentioning, though, that the current design can be easily extended to
allow for the registration of multiple rx_hooks.
The basic idea of the patch is that the rx_np pointer in the netpoll_info
structure points to the struct netpoll that has rx_hook filled in. Aside
from this one case, there is no need for a pointer from the struct
net_device to an individual struct netpoll.
A lock is introduced to protect the setting and clearing of the np_rx
pointer. The pointer will only be cleared upon netpoll client module
removal, and the lock should be uncontested.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Moyer [Thu, 23 Jun 2005 05:05:31 +0000 (22:05 -0700)]
[NETPOLL]: Introduce a netpoll_info struct
This patch introduces a netpoll_info structure, which the struct net_device
will now point to instead of pointing to a struct netpoll. The reason for
this is two-fold: 1) fields such as the rx_flags, poll_owner, and poll_lock
should be maintained per net_device, not per netpoll; and 2) this is a first
step in providing support for multiple netpoll clients to register against the
same net_device.
The struct netpoll is now pointed to by the netpoll_info structure. As
such, the previous behaviour of the code is preserved.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Moyer [Thu, 23 Jun 2005 05:04:55 +0000 (22:04 -0700)]
[NETPOLL]: Set poll_owner to -1 before unlocking in netpoll_poll_unlock()
This trivial patch moves the assignment of poll_owner to -1 inside of
the lock. This fixes a potential SMP race in the code.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 22 Jun 2005 21:32:51 +0000 (14:32 -0700)]
[NET]: dont use strlen() but the result from a prior sprintf()
Small patch to save an unecessary call to strlen() : sprintf() gave us
the length, just trust it.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Wed, 22 Jun 2005 20:29:03 +0000 (13:29 -0700)]
[CRYPTO]: Use CPU cycle counters in tcrypt
After using this facility for a while to test my changes to the
cipher crypt() layer, I realised that I should've listend to Dave
and made this thing use CPU cycle counters :) As it is it's too
jittery for me to feel safe about relying on the results.
So here is a patch to make it use CPU cycles by default but fall
back to jiffies if the user specifies a non-zero sec value.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Wed, 22 Jun 2005 20:27:51 +0000 (13:27 -0700)]
[CRYPTO]: Use template keys for speed tests if possible
The existing keys used in the speed tests do not pass the 3DES quality check.
This patch makes it use the template keys instead.
Other algorithms can supply template keys through the same interface if needed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Harald Welte [Wed, 22 Jun 2005 20:27:23 +0000 (13:27 -0700)]
[CRYPTO]: Add cipher speed tests
From: Reyk Floeter <reyk@vantronix.net>
I recently had the requirement to do some benchmarking on cryptoapi, and
I found reyk's very useful performance test patch [1].
However, I could not find any discussion on why that extension (or
something providing a similar feature but different implementation) was
not merged into mainline. If there was such a discussion, can someone
please point me to the archive[s]?
I've now merged the old patch into 2.6.12-rc1, the result can be found
attached to this email.
[1] http://lists.logix.cz/pipermail/padlock/2004/000010.html
Signed-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Wed, 22 Jun 2005 20:26:36 +0000 (13:26 -0700)]
[CRYPTO]: Kill unnecessary strncpy from tcrypt
It seems that bad code tends to get copied (see test_cipher_speed). So let's
kill this idiom before it spreads any further.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Wed, 22 Jun 2005 20:26:03 +0000 (13:26 -0700)]
[CRYPTO]: White space and coding style clean up in tcrypt
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Harald Welte [Wed, 22 Jun 2005 19:38:33 +0000 (12:38 -0700)]
[NETFILTER]: Fix "iptables -D" rule deletion with ipt_CLUSTERIP target.
The patch just changes the order of structure members.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Harald Welte [Wed, 22 Jun 2005 19:37:50 +0000 (12:37 -0700)]
[NETFILTER]: Fix handling of ICMP packets (RELATED) in ipt_CLUSTERIP target.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 22 Jun 2005 17:42:54 +0000 (10:42 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/i2c-2.6
Linus Torvalds [Wed, 22 Jun 2005 17:41:59 +0000 (10:41 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/w1-2.6
James Morris [Wed, 22 Jun 2005 16:55:42 +0000 (12:55 -0400)]
[PATCH] Update my credits entry
Kumar Gala [Wed, 22 Jun 2005 14:58:03 +0000 (09:58 -0500)]
[PATCH] Fix extra double quote in IPV4 Kconfig
Kconfig option had an extra double quote at the end of the line
which was causing in warning when building.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
James Courtier-Dutton [Sat, 18 Jun 2005 11:50:22 +0000 (13:50 +0200)]
[ALSA] emu10k1: Add more card identification entries.
EMU10K1/EMU10K2 driver
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Takashi Iwai [Fri, 17 Jun 2005 09:54:50 +0000 (11:54 +0200)]
[ALSA] Add dxs_support for Soltek SL-K8Tpro-939
VIA82xx driver
Added dxs_support entry for Soltek SL-K8Tpro-939.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Matt [Tue, 14 Jun 2005 08:19:34 +0000 (10:19 +0200)]
[ALSA] SigmaTel HDA SPDIF and input mux updates
HDA Codec driver
Adds SPDIF in/out support to the SigmaTel HDA codecs. Now builds
the input mux control element names from the defcfg regs.
Signed-off-by: Matt <matt@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 14 Jun 2005 08:18:20 +0000 (10:18 +0200)]
[ALSA] via82xx - Fix info text about dxs_support option
VIA82xx driver
Fixed the info text about dxs_support option (suggest dxs_support=5).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 13 Jun 2005 12:16:38 +0000 (14:16 +0200)]
[ALSA] hda-codec - More fix of ALC880 codec support
Documentation,HDA Codec driver,HDA generic driver,HDA Intel driver
- Fix some invalid configurations, typos in the last patch
- Make init_verbs chainable, so that different configs can share the same
init_verbs
- Reorder and clean up the source codes in patch_realtek.c
- Add the pin default configuration parser, used commonly in cmedia
and realtek patch codes.
- Add 'auto' model to ALC880 for auto-configuration from BIOS
Use this model as default, and 3-stack as fallback
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 13 Jun 2005 12:13:09 +0000 (14:13 +0200)]
[ALSA] Add const prefix
Control Midlevel
Add const prefix to snd_kcontrol_new_t pointer for better protection.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 10 Jun 2005 17:58:24 +0000 (19:58 +0200)]
[ALSA] hda-codec - Add support of more models with ALC codecs
HDA Codec driver,HDA Intel driver
Merged the work of pshou <pshou@realtek.com.tw> for the support of
more models with ALC codecs: ALC880 ASUS, Uniwill, FSC1734, generic 6-stack,
and ALC260 HP. Tests with the real hardwares are appreciated.
The codec patch is cleaned up: The preset configuration of codecs are
stored in the table and copied to the spec instance.
Added/fixed comments.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 10 Jun 2005 17:54:23 +0000 (19:54 +0200)]
[ALSA] hda-codec - Allow sub_device=0 in board config check
HDA Codec driver
Allow sub_device=0 in board config check. This means that every device
with the given sub vendor ID will match.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 10 Jun 2005 17:50:25 +0000 (19:50 +0200)]
[ALSA] hda-codec - Clean up and fix ALC-codec support code
HDA Codec driver
Clean up and fix ALC-codec support code.
The last addition of bound volume is fixed now to handle correctly
the bound 'mute switches'. The analog loopback should work better.
The init verbs are fixed together with this change.
The numbers are replaced with macros for better readability.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 10 Jun 2005 17:48:10 +0000 (19:48 +0200)]
[ALSA] hda-codec - Feed front signals to all surrounds
HDA Codec driver
Feed front signals to all surround channels if no data is given
for surround channels.
It seems that CLFE works as expected (only center outputs) even if
connected from the front line - at least on my test system.
If this change causes problems on other system (e.g. only the left
channel is transferred to the center channel), please let me know...
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 10 Jun 2005 17:45:09 +0000 (19:45 +0200)]
[ALSA] hda-codec - Print all AMP IN values
HDA generic driver
Print all AMP IN values when multiple nodes are connected.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 8 Jun 2005 12:49:31 +0000 (14:49 +0200)]
[ALSA] Disable MPU401 on SIS7018
Trident driver
Disable MPU401 support on SIS7018 since it results in kernel freeze.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 8 Jun 2005 12:48:49 +0000 (14:48 +0200)]
[ALSA] Fix the analog loopback volumes of ALC codecs
HDA Codec driver
Fix the analog loopback volumes of ALC codecs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 8 Jun 2005 12:48:19 +0000 (14:48 +0200)]
[ALSA] Fix the PCM mixer switch for
AD1986A
HDA Codec driver
Fix the PCM mixer switch for
AD1986a (it was a typo).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 8 Jun 2005 12:43:58 +0000 (14:43 +0200)]
[ALSA] Fix the handling of amp cache in hda-codec
HDA Codec driver
Fixed the handling of amp cache in hda-codec driver.
The confliction of cache values with different indices should be fixed now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jaroslav Kysela [Tue, 7 Jun 2005 06:56:24 +0000 (08:56 +0200)]
[ALSA] via82xx - fixed entry for Umax AB 595T (VIA K8N800A - VT8237)
VIA82xx driver
As the original reporter noted, the NO_VRA must be used for loud volumes.
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
James Courtier-Dutton [Sat, 4 Jun 2005 13:03:06 +0000 (15:03 +0200)]
[ALSA] ca0106: Fix 96000 Hz audio playback.
CA0106 driver
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Takashi Iwai [Fri, 3 Jun 2005 09:27:00 +0000 (11:27 +0200)]
[ALSA] Add documentation for HDSP MADI
Documentation
Added documentation for HDSP MADI driver by Winfried Ritsch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 3 Jun 2005 09:25:34 +0000 (11:25 +0200)]
[ALSA] Add HDSP MADI driver
HDSPM driver,PCI drivers,RME9652 driver
Added RME Hammerfall DSP MADI driver by Winfried Ritsch.
(Moved from alsa-driver tree to mainline.)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Christoph Schulz [Fri, 3 Jun 2005 06:28:31 +0000 (08:28 +0200)]
[ALSA] cs4236-irq-handling-fix.patch
CS4236+ driver
Background: The card/chipset supports an external MIDI interrupt. By
default, this interrupt isn't used (because the isapnp mechanism chooses a
configuration without an assigned interrupt). If the user wishes to
explicitly select an interrupt via the mpu_irq parameter for such a
configured device, it doesn't work: The driver always shows:
isapnp MPU: port=0x330, irq=-1
(note the 'irq=-1')
Problem: The driver only allows to set the irq if pnp_irq_valid returns
true for this particular pnp device. This, however, is only true if an
interrupt has already been assigned (pnp_valid_irq returns true if the flag
IORESOURCE_IRQ is set and IORESOURCE_UNSET is not set). If no interrupt
has been assigned so far, IORESOURCE_UNSET is set and pnp_irq_valid returns
false, thereby inhibiting the selection of a valid irq.
Solution: Don't check for a valid (= already assigned) irq at the point of
calling pnp_resource_change.
Tested successfully on Linux 2.6.11.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Jaroslav Kysela [Tue, 31 May 2005 14:59:39 +0000 (16:59 +0200)]
[ALSA] OSS PCM emulation - The 2nd final fix for SNDCTL_DSP_GETOPTR problem
ALSA<-OSS emulation
The problem was negative/wrong result (info.bytes) in a specific condition at
playback startup.
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Tue, 31 May 2005 14:52:58 +0000 (16:52 +0200)]
[ALSA] Add FSC T3010 quirk
Intel8x0 driver
Added ac97_quirk for FSC T3010.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jaroslav Kysela [Tue, 31 May 2005 13:44:23 +0000 (15:44 +0200)]
[ALSA] OSS PCM emulation - The final fix for SNDCTL_DSP_GETOPTR problem
ALSA<-OSS emulation
The problem was negative result (info.bytes) in a specific condition at
playback startup.
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Tue, 31 May 2005 12:35:31 +0000 (14:35 +0200)]
[ALSA] Fix races between PCM drain and other ops
PCM Midlevel
Fix semaphore races between PCM drain and other ops.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 30 May 2005 18:33:44 +0000 (20:33 +0200)]
[ALSA] hda-intel - Fix Oops in the error path
HDA Intel driver
Fixed Oops in the error path from probe function of snd-hda-intel driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 30 May 2005 16:27:03 +0000 (18:27 +0200)]
[ALSA] Add write support to snd-page-alloc proc file
Documentation,Memalloc module,RME HDSP driver,RME9652 driver
Add the write support to snd-page-alloc proc file for buffer pre-allocation.
Removed the pre-allocation codes via module options.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jesper Juhl [Mon, 30 May 2005 15:30:32 +0000 (17:30 +0200)]
[ALSA] Remove redundant NULL checks before kfree
Timer Midlevel,ALSA sequencer,ALSA<-OSS sequencer,Digigram VX core
I2C tea6330t,GUS Library,VIA82xx driver,VIA82xx-modem driver
CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,YMFPCI driver
Digigram VX Pocket driver,Common EMU synth,USB generic driver,USB USX2Y
Checking a pointer for NULL before calling kfree() on it is redundant,
kfree() deals with NULL pointers just fine.
This patch removes such checks from sound/
This patch also makes another, but closely related, change.
It avoids casting pointers about to be kfree()'ed.
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
James Courtier-Dutton [Mon, 30 May 2005 15:20:19 +0000 (17:20 +0200)]
[ALSA] AC97 - renamed vendor/device to subvendor/subdevice where appropriate
Intel8x0 driver
To avoid confusion, the structure members vendor/device were renamed
to subvendor/subdevice, because we compare them with PCI subsystem vendor
and subsystem device.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Jaroslav Kysela [Mon, 30 May 2005 12:48:16 +0000 (14:48 +0200)]
[ALSA] AC97 - renamed vendor/device to subvendor/subdevice where appropriate
AC97 Codec,ATIIXP driver,VIA82xx driver
To avoid confusion, the structure members vendor/device were renamed
to subvendor/subdevice, because we compare them with PCI subsystem vendor
and subsystem device.
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Jaroslav Kysela [Mon, 30 May 2005 09:49:05 +0000 (11:49 +0200)]
[ALSA] via82xx - added 0x1071/0x8399 to while list
VIA82xx driver
- 0x1071, 0x8399 == VIA_DXS_ENABLE
- Umax AB 595T (VIA K8N800A - VT8237)
- reporter: Honza Machacek <Hloupy.Honza@centrum.cz>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Sasha Khapyorsky [Mon, 30 May 2005 06:09:56 +0000 (08:09 +0200)]
[ALSA] Modem support for ALI5451
ALI5451 driver
This patch adds modem support for ali5451. Since it is same pci device
all is done in ali5451.c.
Signed-off-by: Sasha Khapyorsky <sashak@smlink.com>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Tobias Klauser [Sun, 29 May 2005 13:21:02 +0000 (15:21 +0200)]
[ALSA] sound/pci/ca0106: Use the DMA_32BIT_MASK constant
CA0106 driver
Use the DMA_32BIT_MASK constant from dma-mapping.h
when calling pci_set_dma_mask() or pci_set_consistent_dma_mask()
See http://marc.theaimsgroup.com/?t=
108001993000001&r=1&w=2 for details
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Sasha Khapyorsky [Sun, 29 May 2005 13:10:07 +0000 (15:10 +0200)]
[ALSA] PCI modem drivers update
ATIIXP-modem driver,Intel8x0-modem driver,VIA82xx-modem driver
Modem drivers (atiixp-modem, intel8x0m, via82xx-modem) migration
for using MC97 generic modem mixer for off-hook operation.
Signed-off-by: Sasha Khapyorsky <sashak@smlink.com>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Sasha Khapyorsky [Sun, 29 May 2005 13:08:23 +0000 (15:08 +0200)]
[ALSA] MC97 modem mixer in sound/pci/ac97
AC97 Codec
Simple MC97 modem mixer with two common controls: Off-hook and CID,
and Si3056 MC specific control: Modem Speaker.
Signed-off-by: Sasha Khapyorsky <sashak@smlink.com>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
James Courtier-Dutton [Sat, 28 May 2005 14:35:49 +0000 (16:35 +0200)]
[ALSA] Be more specific with which I2C channel to use.
CA0106 driver
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
James Courtier-Dutton [Sat, 28 May 2005 11:28:21 +0000 (13:28 +0200)]
[ALSA] Implement S32_LE(24bit) and 96000 capture rates etc.
CA0106 driver
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
James Courtier-Dutton [Fri, 27 May 2005 21:28:27 +0000 (23:28 +0200)]
[ALSA] Add Mic capture support.
CA0106 driver
Notes: This adds a new mixer item to switch between Mic and Line-in.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
James Courtier-Dutton [Fri, 27 May 2005 20:07:23 +0000 (22:07 +0200)]
[ALSA] Implement support for Line-in capture on SB Live 24bit.
CA0106 driver
Notes: MIC capture not tested yet.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Jaroslav Kysela [Wed, 22 Jun 2005 10:19:24 +0000 (12:19 +0200)]
Merge ... /linux/kernel/git/torvalds/linux-2.6.git
Andrew Morton [Mon, 20 Jun 2005 21:25:45 +0000 (14:25 -0700)]
[PATCH] I2C: fix ds1374 build
Not all architectures implement asm/rtc.h
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Thu, 16 Jun 2005 17:24:14 +0000 (19:24 +0200)]
[PATCH] I2C: w83781d: remove non-i2c sensor chips
This patch removes the support for the W83697HF and W83627THF chips from
the w83781d driver. These chips have no I2C/SMBus interface and are
better supported by the Super-I/O-based w83627hf driver. Documentation
was updated to reflect the support drop.
Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg KH [Thu, 9 Jun 2005 15:39:09 +0000 (17:39 +0200)]
[PATCH] I2C: fix up ds1374.c driver so it will build.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Vinson [Fri, 3 Jun 2005 21:43:56 +0000 (14:43 -0700)]
[PATCH] I2C: Add support for Maxim/Dallas DS1374 Real-Time Clock Chip (2/2)
This change provides support for the DS1374 Real-Time Clock chip present
on the MPC8349ADS board. It depends on a previous patch which adds I2C
support for the DS1374.
Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Vinson [Fri, 3 Jun 2005 21:36:06 +0000 (14:36 -0700)]
[PATCH] I2C: Add support for Maxim/Dallas DS1374 Real-Time Clock Chip (1/2)
Add support for Maxim/Dallas DS1374 Real-Time Clock Chip
This change adds support for the Maxim/Dallas DS1374 RTC chip. This chip
is an I2C-based RTC that maintains a simple 32-bit binary seconds count
with battery backup support.
Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
bgardner@wabtec.com [Tue, 7 Jun 2005 13:55:38 +0000 (08:55 -0500)]
[PATCH] I2C: add new pca9539 driver
This is an i2c driver for the Philips PCA9539 (16 bit I/O port).
It uses the new i2c-sysfs interfaces.
The patch includes documentation.
It depends on the patch that renames "i2c-sysfs.h" to "hwmon-sysfs.h"
Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Mon, 6 Jun 2005 17:34:45 +0000 (19:34 +0200)]
[PATCH] I2C: rename i2c-sysfs.h to hwmon-sysfs.h
This patch renames the new linux/i2c-sysfs.h header file to
linux/hwmon-sysfs.h. This names seems to be more appropriate since this
file defines macros and structures not related to i2c but to hardware
monitoring drivers. The patch also updates the five hardware monitoring
driver which include that header file already.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
BGardner@Wabtec.com [Fri, 3 Jun 2005 17:03:27 +0000 (13:03 -0400)]
[PATCH] max6875: new i2c device driver
This patch adds support for the MAX6875/MAX6874 chips.
Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Sun, 5 Jun 2005 09:53:25 +0000 (11:53 +0200)]
[PATCH] I2C: drivers/i2c/chips/it87.c: use dynamic sysfs callbacks
This patch modifies the it87 hardware monitoring driver to take benefit
of the new sysfs callback features introduced by Yani Ioannou, making
the code much clearer and the resulting driver significantly smaller.
From: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Sun, 5 Jun 2005 18:32:27 +0000 (20:32 +0200)]
[PATCH] I2C: lm63 uses new sysfs callbacks
I updated the lm63 hardware monitoring driver to take benefit of Yani
Ioannou's new sysfs callback capabilities.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Sun, 5 Jun 2005 19:16:39 +0000 (21:16 +0200)]
[PATCH] I2C: lm83 uses new sysfs callbacks
I updated the lm83 hardware monitoring driver to take benefit of Yani
Ioannou's new sysfs callback capabilities.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Sun, 5 Jun 2005 19:27:28 +0000 (21:27 +0200)]
[PATCH] I2C: lm90 uses new sysfs callbacks
I updated the lm90 hardware monitoring driver to take benefit of Yani
Ioannou's new sysfs callback capabilities.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Grant Coady [Fri, 3 Jun 2005 00:05:19 +0000 (10:05 +1000)]
[PATCH] I2C: add adm9240 driver documentation
This patch adds adm9240 driver doc, with thanks to Rudolf Marek
for review.
Signed-off-by: Grant Coady <gcoady@gmail.com>
Acked-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Sat, 4 Jun 2005 11:17:43 +0000 (13:17 +0200)]
[PATCH] I2C: pcf8574 driver cleanup
I found a possible cleanup in the pcf8574 driver. We don't need to store
the read value in our private data structure, as we then never use it
again. I asked Aurelien and he is fine with the change. Please apply,
thanks.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
R.Marek@sh.cvut.cz [Sat, 28 May 2005 11:26:24 +0000 (11:26 +0000)]
[PATCH] I2C: KConfig update - some EXPERIMENTAL removal
Following patch removes EXPERIMENTAL flag from some of I2C bus and chip
drivers. It is removed when the driver is in kernel at least from
2.6.3 and I generally think there is no problem with it.
Also this patch adds SiS 745 to help option of sis96x and it
also fixes nForce2 driver entry to reflect current state.
Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
R.Marek@sh.cvut.cz [Thu, 26 May 2005 12:42:29 +0000 (12:42 +0000)]
[PATCH] I2C: documentation update 3/3
This patch adds information about available userspace utillities
for system health monitoring drivers.
Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
R.Marek@sh.cvut.cz [Thu, 26 May 2005 12:42:19 +0000 (12:42 +0000)]
[PATCH] I2C: documentation update 2/3
This patch adds missing documentation for system health monitoring chips.
I would like to thank all people, who helped me with this project.
Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
R.Marek@sh.cvut.cz [Thu, 26 May 2005 12:42:11 +0000 (12:42 +0000)]
[PATCH] I2C: documentation update 1/3
This patch just changes the extension of Documentation/i2c/chips/smsc47b397.txt
to none - to conform with naming in i2c subsystem directory.
Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Wed, 25 May 2005 00:34:51 +0000 (17:34 -0700)]
[PATCH] I2C: add i2c driver for TPS6501x
This adds an I2C driver for the TPS6501x series of power management chips.
It's used on many OMAP based boards, and this driver has been widely used
in the Linux-OMAP trees over the last year or so.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Sun, 22 May 2005 07:39:11 +0000 (09:39 +0200)]
[PATCH] I2C: Sensors mailing list has moved
The following patch updates all references to the sensors mailing list,
so as to reflect the fact that the list recently moved to a new home and
changed addresses. I'll work out a similar patch for Linux 2.4 soon.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sylvain Munaut [Wed, 18 May 2005 17:39:57 +0000 (19:39 +0200)]
[PATCH] i2c: Race fix for i2c-mpc.c
i2c: Race fix for i2c-mpc.c
The problem was that the clock speed and driver data is
initialized after the i2c adapter was added. This caused
the i2c bus to start working at a wrong speed. (Mostly
noticable on the second bus on mpc5200)
With this patch we've tried to keep the i2c adapter
working perfectly all the time it is included in the system.
Initialize before added, Remove garbage after deleleted.
Submitted-by: Asier Llano Palacios
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tobias Klauser [Thu, 19 May 2005 19:41:47 +0000 (21:41 +0200)]
[PATCH] I2C: Spelling fixes for drivers/i2c/i2c-dev.c
This patch fixes a misspelling in a comment section.
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tobias Klauser [Thu, 19 May 2005 19:40:38 +0000 (21:40 +0200)]
[PATCH] I2C: Spelling fixes for drivers/i2c/i2c-core.c
This patch fixes a misspelling in a comment section.
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tobias Klauser [Thu, 19 May 2005 19:39:06 +0000 (21:39 +0200)]
[PATCH] I2C: Spelling fixes for drivers/i2c/busses/i2c-parport.c
This patch fixes a double "the" in a comment section.
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tobias Klauser [Thu, 19 May 2005 20:27:23 +0000 (22:27 +0200)]
[PATCH] I2C: Spelling fixes for drivers/i2c/algos/i2c-algo-pca.c
This patch fixes the some misspellings and a trailing whitespace in
the comments.
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Wed, 22 Jun 2005 04:01:59 +0000 (21:01 -0700)]
[PATCH] I2C: fix up some sysfs device attribute file parameters
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Tue, 17 May 2005 20:38:57 +0000 (22:38 +0200)]
[PATCH] I2C: Kill another macro abuse in via686a
This patch kills another macro abuse in the via686a hardware monitoring
driver. Using a macro just to alias an array is quite useless, isn't it?
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Tue, 17 May 2005 16:09:36 +0000 (18:09 +0200)]
[PATCH] I2C: chips/Kconfig corrections
Here are some corrections for drivers/i2c/chips/Kconfig.
Signed-off-by: Alexey Fisher <fishor@gmx.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Grant Coady [Tue, 17 May 2005 07:16:02 +0000 (17:16 +1000)]
[PATCH] I2C: driver adm1021: remove die_code
This patch removes die_code from adm1021 as nothing within the
driver uses it.
Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Mon, 16 May 2005 17:00:52 +0000 (19:00 +0200)]
[PATCH] I2C: Coding style cleanups to via686a
The via686a hardware monitoring driver has infamous coding style at the
moment. I'd like to clean up the mess before I start working on other
changes to this driver. Is the following patch acceptable? No code
change, only coding style (indentation, alignments, trailing white
space, a few parentheses and a typo).
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Mon, 16 May 2005 16:52:38 +0000 (18:52 +0200)]
[PATCH] I2C: Kill common macro abuse in chip drivers
This patch kills a common macro abuse in i2c chip drivers: defining
ALARMS_FROM_REG returning its argument unchanged. Dropping the macro
makes the code somewhat more readable IMHO.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dominik Hackl [Mon, 16 May 2005 16:12:18 +0000 (18:12 +0200)]
[PATCH] I2C: include of jiffies.h for some i2c drivers
This patch includes jiffies.h in two i2c drivers.
(jiffies.h is needed for the time_after function.)
Signed-off-by: Dominik Hackl <dominik@hackl.dhs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Grant Coady [Fri, 13 May 2005 10:26:10 +0000 (20:26 +1000)]
[PATCH] I2C: adm9240 driver cleanup
This patch adds an info print of detected VRM stolen from Sebastian
Witt's atxp1 sriver. ADM9240 already has vrm accessor removed.
Write no-op and whitespace fixes removed :)
Couple of comments changed, tested on 2.6.11.9.
Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Grant Coady [Thu, 12 May 2005 01:59:29 +0000 (11:59 +1000)]
[PATCH] I2C: sysfs names: rename to cpu0_vid, take 3
This small patch changes two drivers, adm1025 and adm1026, to
report vid as cpu0_vid sysfs name as used by the other drivers.
Added duplicated names and six month warning for old names to
be removed as requested. Compile tested.
Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Grant Coady [Thu, 12 May 2005 03:41:51 +0000 (13:41 +1000)]
[PATCH] I2C: Setting w83627hf fan divisor 128 fails.
Jarkko Lavinen provided patch to fix: "couldn't set the divisor 128
through fan1_div sysfs entry even though the chip supports it and
setting divisors 1..64 worked. This was due to POWER_TO_REG() only
checking 2's powers 0 till 5 but not 6."
This patch applies that fix to w83627hf and w83781d drivers.
Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Grant Coady [Fri, 6 May 2005 07:40:51 +0000 (17:40 +1000)]
[PATCH] I2C: remove <linux/delay.h> from via686a
In my cross-reference checking of sysfs names, the via686a needs
special case treatment as it the only driver expands S_IWUSR to
00200 with gcc -E. (00200 is the correct value for S_IWUSR).
This is caused by the driver including <linux/delay.h>, it compiles
fine without that header but I am unable to test drive the change.
Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Sat, 7 May 2005 20:58:46 +0000 (22:58 +0200)]
[PATCH] I2C: Remove redundancy from i2c-core.c
Call i2c_transfer() from i2c_master_send() and i2c_master_recv() to
avoid the redundant code that was in all three functions. It also
removes unnecessary debug statements as suggested by Jean Delvare.
This is important for the non-blocking interfaces because they will
have to handle a non-blocking interface in this area. Having it in
one place greatly simplifies the changes.
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kumar Gala [Tue, 3 May 2005 23:50:38 +0000 (18:50 -0500)]
[PATCH] I2C: Allow for sharing of the interrupt line for i2c-mpc.c
I2C-MPC: Allow for sharing of the interrupt line
On the MPC8548 devices we have multiple I2C-MPC buses however they are on the
same interrupt line. Made request_irq pass SA_SHIRQ now so the second bus can
register for the same IRQ.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Steven Cole [Wed, 4 May 2005 00:21:25 +0000 (18:21 -0600)]
[PATCH] Spelling fixes for drivers/i2c.
Here are some spelling corrections for drivers/i2c.
occured -> occurred
intialization -> initialization
Everytime -> Every time
transfering -> transferring
relevent -> relevant
continous -> continuous
neccessary -> necessary
explicitely -> explicitly
Celcius -> Celsius
differenciate -> differentiate
Signed-off-by: Steven Cole <elenstev@mesatop.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Tue, 26 Apr 2005 20:09:43 +0000 (22:09 +0200)]
[PATCH] I2C: Add support for the LPC47M15x and LPC47M192 chips to smsc47m1
This simple patch adds support for the SMSC LPC47M15x and LPC47M192
chips to the smsc47m1 hardware monitoring driver. These chips are
compatible with the other ones already supported by the driver, so I see
no reason not to support them, especially when the Linux 2.4 version of
the driver does already.
I also modified the info printks to name the chips by their real name.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Mon, 2 May 2005 21:08:22 +0000 (23:08 +0200)]
[PATCH] I2C: Fix bugs in the new w83627ehf driver
These are the fixes for the bug you spotted in my new w83627ehf driver:
- Explicit division by 0.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean Delvare [Mon, 25 Apr 2005 20:43:25 +0000 (22:43 +0200)]
[PATCH] I2C: New hardware monitoring driver: w83627ehf
This is a new hardware monitoring driver, w83627ehf, which supports the
Winbond W83627EHF Super-I/O chip. The driver is not complete, but
already usable. It only implements fan speed and temperature monitoring,
while the chip also supports voltage inputs with VID, PWM output and
temperature sensor selection. I have no more time to work on this, but
anyone with supported hardware could add the missing functionalities
later.
This driver is largely derived from the w83627hf driver.
Thanks to Leon Moonen and Steve Cliffe for tesing the preliminary
versions of my driver and reporting the problems they encountered.
Thanks to Grant Coady for noticing and fixing various corner cases in
the fan management. This third version of the driver hopefully addresses
all the issues the original version had.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>