OSDN Git Service
Larry Finger [Thu, 25 Apr 2013 14:50:28 +0000 (09:50 -0500)]
rtlwifi: rtl8192cu: Fix false loss of AP indication
A major change in the rtlwifi family recently added code to detect when
there is loss of AP signals. One critical statement needed for the USB
driver was missed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Piotr Haber [Thu, 25 Apr 2013 10:27:09 +0000 (12:27 +0200)]
brcmsmac: Fix merge issue
Commit
7088f4835aa353f7226e57e73fd9e6564a4dfb75
"Merge branch 'master' of
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless"
ramoved call to brcms_led_unregister in mac80211_if.c
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Piotr Haber <phaber@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Hauke Mehrtens [Wed, 24 Apr 2013 19:30:54 +0000 (21:30 +0200)]
ssb: implement ssb spuravoid for chipid BCM43222
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Yogesh Ashok Powar [Tue, 23 Apr 2013 23:49:50 +0000 (16:49 -0700)]
mwifiex: Correct pci_unmap_single's size
There exist mismatch between the size used for pci_map and
pci_unmap on command skb. Correcting it.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Yogesh Ashok Powar [Tue, 23 Apr 2013 23:49:49 +0000 (16:49 -0700)]
mwifiex: Do not kfree cmd buf while unregistering PCIe
All the command buffers are freed in mwifiex_free_cmd_buffer()
and hence there is no need to kfree the current command buffer
again. This might ends up freeing memory allocated by some other
kernel code.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Yogesh Ashok Powar [Tue, 23 Apr 2013 23:49:48 +0000 (16:49 -0700)]
mwifiex: Call pci_release_region after calling pci_disable_device
"drivers should call pci_release_region() AFTER
calling pci_disable_device()"
Please refer section 3.2 Request MMIO/IOP resources
in Documentation/PCI/pci.txt
Cc: <stable@vger.kernel.org> # 3.2+
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Yogesh Ashok Powar [Tue, 23 Apr 2013 23:49:47 +0000 (16:49 -0700)]
mwifiex: Use pci_release_region() instead of a pci_release_regions()
PCI regions are associated with the device using
pci_request_region() call. Hence use pci_release_region()
instead of pci_release_regions().
Cc: <stable@vger.kernel.org> # 3.2+
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Fri, 26 Apr 2013 12:37:39 +0000 (08:37 -0400)]
Merge branch 'for-john' of git://git./linux/kernel/git/iwlwifi/iwlwifi-next
John W. Linville [Fri, 26 Apr 2013 12:36:00 +0000 (08:36 -0400)]
Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth-next
Andreas Fenkart [Mon, 22 Apr 2013 09:10:23 +0000 (11:10 +0200)]
Bluetooth: btmrvl: report error if verify_fw_download times out
FW does the synchronization of the different modules during init.
It will report different modules, that it is ready at different times.
The fw download 'winner' will be reported fw ready first. Without this
patch, btmrvl was already continuing before the FW told it too. Probably
on behalf of the 'winner' which then never sees FW ready and times out.
Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andreas Fenkart [Mon, 22 Apr 2013 09:10:22 +0000 (11:10 +0200)]
Bluetooth: btmrvl: release lock while waiting for fw download complete
If not winner, driver must release the sdio host lock, so the fw
download can progress. While holding the lock fw download is stalled
and the following error is produced:
[ 235.746015] Bluetooth: FW failed to be active in time!
[ 235.752799] Bluetooth: Downloading firmware failed!
Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andy Shevchenko [Tue, 23 Apr 2013 09:53:46 +0000 (12:53 +0300)]
Bluetooth: btmrvl: use native helpers for debugfs
Clean up the code by using native debugfs helpers, instead of implementing
them ourselves:
debugfs_create_u8()
debugfs_create_x16()
debugfs_create_file()
debugfs_remove_recursive()
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Marcel Holtmann [Tue, 23 Apr 2013 07:59:00 +0000 (00:59 -0700)]
Bluetooth: Remove unneeded parameter from L2CAP ATT channel handling
The CID is fixed to L2CAP ATT channel and so there is no need to hand it
down to the handling function. Just use a constant instead.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Fengguang Wu [Sat, 20 Apr 2013 13:24:31 +0000 (16:24 +0300)]
Bluetooth: hci_get_cmd_complete() can be static
There are new sparse warnings show up in
tree: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next master
head:
a0b644b0385fa58ca578f6dce4473e8a8e6f6c38
commit:
75e84b7c522c6e07964cd1f5bf28535768a1e9fa Bluetooth: Add __hci_cmd_sync() helper function
date: 13 days ago
>> net/bluetooth/hci_core.c:82:16: sparse: symbol 'hci_get_cmd_complete' was not declared. Should it be static?
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tedd Ho-Jeong An [Fri, 19 Apr 2013 16:57:43 +0000 (09:57 -0700)]
Bluetooth: Add support for Intel Bluetooth device [8087:07dc]
This patch adds support for Intel Bluetooth device by adding
btusb_setup_intel() routine that update the device with ROM patch.
T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=07dc Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Johan Hedberg [Fri, 19 Apr 2013 15:35:21 +0000 (18:35 +0300)]
Bluetooth: Fix sending write_le_host_supporte for LE-only controllers
The Bluetooth Core Specification (4.0) defines the Write LE Host
Supported HCI command as only available for controllers supporting
BR/EDR. This is further reflected in the Read Local Extended Features
HCI command also not being available for LE-only controllers. In other
words, host-side LE support is implicit for single-mode LE controllers
and doesn't have explicit HCI-level enablement.
This patch ensures that the LE setting is always exposed as enabled
through mgmt and returns a "rejected" response if user space tries to
toggle the setting. The patch also ensures that Write LE Host Supported
is never sent for LE-only controllers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Andreas Fenkart [Thu, 18 Apr 2013 23:34:12 +0000 (16:34 -0700)]
mwifiex: rework round robin scheduling of bss nodes.
Rotate bss prio list, so the bss next to the one served, will come first
in the list of bss' with equal priority. This way we pick bss nodes in a
round robin fashion. Using list rotation instead of a cur ptr simplifies
iteration to calling list_for_each_entry. List rotation is done via
list_move, where the head itself is temporarily removed and then
re-inserted after the bss just served.
Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Andreas Fenkart [Thu, 18 Apr 2013 23:33:45 +0000 (16:33 -0700)]
mwifiex: replace ra_list_curr by list rotation.
After a packet is successfully transmitted, ra list is rotated, so the ra
next to the one transmitted, will be the first in the list. This way we
pick the ra' in a round robin fashion. This significantly simplifies
iteration in mwifiex_wmm_get_highest_priolist_ptr to a call to
list_for_each_entry.
List rotation is done via list_move, where the head itself is temporarily
removed and then re-inserted after the item just transferred.
Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Tue, 23 Apr 2013 10:53:15 +0000 (12:53 +0200)]
brcmfmac: add credit borrowing mechanism
The firmware provides credits to the driver per WMM-AC. When
only AC_BE are to be transmitted to the firmware the driver
may use credits from other priorities to send AC_BE packets
towards the firmware.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Tue, 23 Apr 2013 10:53:14 +0000 (12:53 +0200)]
brcmfmac: correct error handling in brcmf_fws_init()
In brcmf_fws_init() the error flows were not properly handled
and the caller ignored the return value. The only action that
is allowed to fail in brcmf_fws_init() is setting the tlv in
firmware as the feature is not supported on all devices.
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Tue, 23 Apr 2013 10:53:13 +0000 (12:53 +0200)]
brcmfmac: flush queue upon MACDESC_DEL firmware signal
When firmware signals the driver to remove a destination entry
it may have sk_buff packets queued for it. These should be freed.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Piotr Haber [Tue, 23 Apr 2013 10:53:12 +0000 (12:53 +0200)]
brcmfmac: support critical protocol API for DHCP
Adds support for the critical protocol API provided by nl80211
which gives Wifi traffic priority over a Bluetooth (e)SCO connection
and disables scanning during DCHP negotiation.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Piotr Haber <phaber@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Tue, 23 Apr 2013 10:53:11 +0000 (12:53 +0200)]
brcmfmac: allow scanning to be suppressed in the driver
During the DHCP protocol exchange it is benificial to suppress
scan requests which may decrease time to complete DHCP protocol.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Tue, 23 Apr 2013 06:52:19 +0000 (12:22 +0530)]
ath9k: Fix RX DMA mapping
After the commit "ath9k: improve dma map failure handling", the
wrong buffer was DMA-unmapped, introducing warnings like the one below.
This patch fixes the issue.
WARNING: at /home/sujith/dev/wireless-testing/lib/dma-debug.c:986 check_sync+0x4bc/0x580()
Hardware name: LIFEBOOK AH531
ath9k 0000:02:00.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x00000000d9012800] [size=48 bytes]
Pid: 86, comm: kworker/u:5 Tainted: G W O 3.9.0-rc8-wl-debug #106
Call Trace:
[<
ffffffff810410c0>] warn_slowpath_common+0x70/0xa0
[<
ffffffff8104113c>] warn_slowpath_fmt+0x4c/0x50
[<
ffffffff8125432c>] check_sync+0x4bc/0x580
[<
ffffffff8109e5f7>] ? trace_hardirqs_on_caller+0xa7/0x190
[<
ffffffff8109e6ed>] ? trace_hardirqs_on+0xd/0x10
[<
ffffffff81254488>] debug_dma_sync_single_for_device+0x48/0x50
[<
ffffffffa0a53825>] ? ath9k_iowrite32+0x35/0x90 [ath9k]
[<
ffffffff812512f0>] ? swiotlb_tbl_sync_single+0x50/0x90
[<
ffffffff81251350>] ? swiotlb_sync_single+0x20/0x30
[<
ffffffff8125137f>] ? swiotlb_sync_single_for_device+0xf/0x20
[<
ffffffffa0a58baf>] ath_rx_edma_buf_link+0xef/0x140 [ath9k]
[<
ffffffffa0a58c4e>] ath_rx_addbuffer_edma+0x4e/0x90 [ath9k]
[<
ffffffffa0a59c51>] ath_startrecv+0xf1/0x120 [ath9k]
[<
ffffffffa0a550e0>] ath_complete_reset+0x20/0x130 [ath9k]
[<
ffffffffa0a5790d>] ath_reset_internal+0x10d/0x210 [ath9k]
[<
ffffffffa0a5878c>] ath9k_config+0x47c/0x7b0 [ath9k]
[<
ffffffffa06d4978>] ieee80211_hw_config+0x88/0x3f0 [mac80211]
[<
ffffffffa06d4a3f>] ? ieee80211_hw_config+0x14f/0x3f0 [mac80211]
[<
ffffffffa06dbed1>] __ieee80211_scan_completed+0xc1/0x440 [mac80211]
[<
ffffffffa06dd002>] ieee80211_scan_work+0x82/0x440 [mac80211]
[<
ffffffff810606a3>] process_one_work+0x1e3/0x530
[<
ffffffff81060641>] ? process_one_work+0x181/0x530
[<
ffffffff8106163f>] worker_thread+0x10f/0x3c0
[<
ffffffff81061530>] ? manage_workers+0x330/0x330
[<
ffffffff810665da>] kthread+0xea/0xf0
[<
ffffffff810664f0>] ? kthread_create_on_node+0x140/0x140
[<
ffffffff8146085c>] ret_from_fork+0x7c/0xb0
[<
ffffffff810664f0>] ? kthread_create_on_node+0x140/0x140
Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Tue, 23 Apr 2013 06:52:18 +0000 (12:22 +0530)]
ath9k: Use lockless variants for the RX fifo queue
The RX fifo can be accessed from the common tasklet or it can
be reaped/cleaned when RX is stopped, which is done when doing
a reset or channel change - this happens in process context.
Since it is ensured that there are no pending tasklets when
stopping RX and cleaning the FIFO, there is no need to use
SKB queue functions which take internal locks.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Tue, 23 Apr 2013 06:52:17 +0000 (12:22 +0530)]
ath9k: Reduce deep indentation
The EDMA case is handled first, so the else condition
can be removed.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sujith Manoharan [Tue, 23 Apr 2013 06:52:16 +0000 (12:22 +0530)]
ath9k: Remove unused argument "size"
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Mon, 22 Apr 2013 21:11:44 +0000 (23:11 +0200)]
ath9k: add support for the new rate control API
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Mon, 22 Apr 2013 21:11:43 +0000 (23:11 +0200)]
ath9k: merge ath_tx_start_dma into ath_tx_start
The split makes no sense and merging the functions makes further changes
easier to implement
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Han Shen [Mon, 22 Apr 2013 20:35:07 +0000 (13:35 -0700)]
rtl8192c:dm: Properly initialize local array and set value.
GCC 4.8 is spitting out uninitialized-variable warnings against
"drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c". This patch adds
initialization to the variable and properly sets its value.
Signed-off-by: Han Shen (shenhan@google.com)
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Mathias Kretschmer [Mon, 22 Apr 2013 20:34:41 +0000 (22:34 +0200)]
ath9k: apply coverage class on slottime too
According to 802.11-2007 17.3.8.6 (slot time), the slot time should
be increased by 3 us * coverage class. The code only increased the
ack timeout, which is fixed by this patch.
We have noticed in our long shot scenario that we see less collisions
with this patch.
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
[add standard reference and commit message]
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Tue, 23 Apr 2013 18:10:10 +0000 (14:10 -0400)]
Merge branch 'master' of git://git.infradead.org/users/rafal/b43-next
John W. Linville [Tue, 23 Apr 2013 18:09:39 +0000 (14:09 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless
Conflicts:
drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
Rafał Miłecki [Fri, 12 Apr 2013 15:58:13 +0000 (17:58 +0200)]
b43: N-PHY: don't use deprecated b43_radio_foo16
All radio ops are 16b (there is only 1 exception for reg 0x1), so we
deprecated b43_radio_read16 and b43_radio_write16 long time ago.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Sun, 31 Mar 2013 18:00:45 +0000 (20:00 +0200)]
b43: N-PHY: clean init tables
Sort defines, use one macro for all revs, support for 5GHz when
uploading antenna table.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Sat, 30 Mar 2013 23:40:21 +0000 (00:40 +0100)]
b43: N-PHY: move tables init function to tables file
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Sat, 30 Mar 2013 21:34:40 +0000 (22:34 +0100)]
b43: N-PHY: use defines for (re)storing VCM config
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Sat, 30 Mar 2013 20:50:46 +0000 (21:50 +0100)]
b43: N-PHY: use shortcut "ctl" in functions names
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Fri, 29 Mar 2013 10:37:02 +0000 (11:37 +0100)]
b43: N-PHY: use enum for INTC override function argument
Also make a function name shorter so we can easily fit 80 chars.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Fri, 29 Mar 2013 10:13:40 +0000 (11:13 +0100)]
b43: N-PHY: define missing registers
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Thu, 28 Mar 2013 21:25:38 +0000 (22:25 +0100)]
b43: use defines for board_type
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Wed, 20 Mar 2013 18:13:47 +0000 (19:13 +0100)]
b43: N-PHY: fix "NB" RSSI calibration on PHYs rev2-
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Wed, 20 Mar 2013 17:24:47 +0000 (18:24 +0100)]
b43: N-PHY: use enum for RSSI type everywhere we use it
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Wed, 20 Mar 2013 16:30:38 +0000 (17:30 +0100)]
b43: N-PHY: rename RSSI types to be shorter and more accurate
Thanks to Broadcom releasing some code we can use better names.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Wed, 20 Mar 2013 16:26:03 +0000 (17:26 +0100)]
b43: N-PHY: use more friendly variables names in RSSI code
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Wed, 20 Mar 2013 15:57:04 +0000 (16:57 +0100)]
b43: N-PHY: simplify conditions in RSSI offset scale function
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Wed, 20 Mar 2013 15:51:39 +0000 (16:51 +0100)]
b43: N-PHY: use enum for RAIL type
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Tue, 19 Mar 2013 17:12:00 +0000 (18:12 +0100)]
b43: HT-PHY: use enum for RSSI types
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Sun, 17 Mar 2013 18:49:08 +0000 (19:49 +0100)]
b43: HT-PHY: store TX power state before disabling it
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Sun, 17 Mar 2013 18:08:15 +0000 (19:08 +0100)]
b43: HT-PHY: define regs for power estimation
In MMIO dumps of ndiswrapper there are following PHY ops:
phy_read(0x0118) -> 0x013d
phy_read(0x01ed) -> 0x993d
phy_read(0x0119) -> 0x012f
phy_read(0x01ee) -> 0x992f
phy_read(0x011a) -> 0x0139
phy_read(0x0969) -> 0x9939
It matches the code of wlc_phy_txpower_est_power_nphy (from brcm80211),
so we know the registers meaning.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Sat, 16 Mar 2013 22:57:10 +0000 (23:57 +0100)]
b43: HT-PHY: do some extra TSSI setup after configuring TX
After b43_phy_ht_tx_power_ctl_setup there are some extra radio ops:
radio_read(0x08bf) -> 0x0001
radio_write(0x08bf) <- 0x0001
radio_write(0x0159) <- 0x0011
On N-PHY we write 0x11 to TSSI regs, so it's probably sth similar.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Sat, 16 Mar 2013 22:47:29 +0000 (23:47 +0100)]
b43: HT-PHY: finish calculating values for idle TSSI
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Sat, 16 Mar 2013 22:40:01 +0000 (23:40 +0100)]
b43: HT-PHY: tables: don't duplicate core-generic regs
Now when we know many radio regs at 0x000 are core-generic, I've noticed
we duplicate some values in the tables.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Sat, 16 Mar 2013 22:24:21 +0000 (23:24 +0100)]
b43: HT-PHY: rename defines addressing cores on the 2059 radio
After comparing writes to registers at 0x000, 0x400 and 0x800 it seems
there are many very similar writes. So 0x000 offset is not for accessing
something totally different, but probably just the first out of three
cores.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Bing Zhao [Fri, 12 Apr 2013 17:34:18 +0000 (10:34 -0700)]
mwifiex: remove redundant initialization for bss_descriptor
Initialization of bss_descriptor is unnecessary as the entire
structure will be overwritten by a memcpy followed by.
Initialize disable_11ac flag properly by setting it to true in
mwifiex_fill_new_bss_desc().
Reported-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Paul Stewart <pstew@chromium.org>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Bing Zhao [Fri, 12 Apr 2013 17:34:17 +0000 (10:34 -0700)]
mwifiex: fix use-after-free in beacon_ie processing
beacon_ie buffer is allocated in mwifiex_fill_new_bss_desc()
and the buffer pointer is saved in bss_desc->beacon_buf.
beacon_ie is freed before the function returns. However,
bss_desc->beacon_buf is still being accessed afterwards.
Fix it by freeing beacon_ie (bss_desc->beacon_buf) in
caller's scope.
Reviewed-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Paul Stewart <pstew@chromium.org>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Bing Zhao [Sat, 20 Apr 2013 04:00:44 +0000 (21:00 -0700)]
mwifiex: don't try to associate when bss_mode is not STA
We have blocked association attempts on interfaces configured in
AP and AD-HOC modes. P2P mode should be blocked too.
Furthermore, an error code must be returned if we are unable to
associate.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Bing Zhao [Sat, 20 Apr 2013 00:44:44 +0000 (17:44 -0700)]
mwifiex: make use of msecs_to_jiffies()
Use msecs_to_jiffies() wherever possible.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Bing Zhao [Sat, 20 Apr 2013 00:44:43 +0000 (17:44 -0700)]
mwifiex: correct bss_mode check while appending vht operation IE
priv->bss_mode uses NL80211_IFTYPE_* definitions.
HostCmd_BSS_MODE_IBSS is used in ad-hoc start/join command between
driver and firmware.
Coincidentally both HostCmd_BSS_MODE_IBSS and NL80211_IFTYPE_STATION
are defined as 2. That explains why nobody complained.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Avinash Patil [Sat, 20 Apr 2013 00:44:42 +0000 (17:44 -0700)]
mwifiex: use PCI_DMA_FROMDEVICE for RX queue de-init
There is a typo in mwifiex_cleanup_rxq_ring() which uses
PCI_DMA_TODEVICE while unmapping PCI memory.
We should actually use PCI_DMA_FROMDEVICE.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Bing Zhao [Sat, 20 Apr 2013 00:44:41 +0000 (17:44 -0700)]
mwifiex: configure p2p interface during initialization
Send P2P_MODE_CFG cmd to firmware when p2p interface is created.
Without proper p2p configuration firmware may behave incorrectly
while handling commands sent through this interface.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Stone Piao <piaoyun@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Paul Stewart [Fri, 19 Apr 2013 15:37:46 +0000 (08:37 -0700)]
mwifiex: Start P2P devices in P2P mode
p2p devices should identify themselves as such to userspace at
startup, so the connection manager can decide which interface
to start wpa_supplicant instances on.
Signed-off-by: Paul Stewart <pstew@chromium.org>
Reviewed-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Joe Perches [Fri, 19 Apr 2013 15:33:40 +0000 (08:33 -0700)]
rt2x00: Use more current logging styles, shrink object size
Reduce object space ~2% using more current logging styles.
Neaten and simplify logging macros.
Use wiphy_<level> where appropriate.
Coalesce formats.
Convert ERROR/WARNING/INFO macros to rt2x00_<level>
Convert EEPROM to rt2x00_eeprom_dbg
Convert PROBE_ERROR to rt2x00_probe_err
Convert DEBUG to rt2x00_dbg
Convert EEPROM to rt2x00_eeprom_dbg
$ size drivers/net/wireless/rt2x00/built-in.o*
text data bss dec hex filename
245639 71696 69584 386919 5e767 drivers/net/wireless/rt2x00/built-in.o.new
240609 70096 68944 379649 5cb01 drivers/net/wireless/rt2x00/built-in.o.new.nodyndbg
240609 70096 68944 379649 5cb01 drivers/net/wireless/rt2x00/built-in.o.new.no_rt2x00_debug
249198 70096 70352 389646 5f20e drivers/net/wireless/rt2x00/built-in.o.old
249198 70096 70352 389646 5f20e drivers/net/wireless/rt2x00/built-in.o.old.nodyndbg
244222 70096 69712 384030 5dc1e drivers/net/wireless/rt2x00/built-in.o.old.no_rt2x00_debug
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Gabor Juhos [Fri, 19 Apr 2013 08:13:52 +0000 (10:13 +0200)]
rt2x00: rt2800lib: rename rt2800_init_bbb_early to rt2800_init_bbp_early
The function is used for BBP register initialization,
fix the typo in the function name to reflect that.
The patch contains no functional changes.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Wei Yongjun [Fri, 19 Apr 2013 02:14:31 +0000 (10:14 +0800)]
brcmfmac: fix potential NULL pointer dereference in brcmf_fws_flow_control_check()
The dereference to 'ifp' in debug code should be moved below the NULL test.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Vladimir Kondratiev [Thu, 18 Apr 2013 11:33:53 +0000 (14:33 +0300)]
wil6210: more Rx descriptor accessor functions
Helpers to fetch various fields from the Rx descriptor
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Vladimir Kondratiev [Thu, 18 Apr 2013 11:33:52 +0000 (14:33 +0300)]
wil6210: Use cached copy of Tx descriptor
Original Tx descriptor stored is in non-cached area for DMA;
copy it to the cached memory to speed-up access
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Vladimir Kondratiev [Thu, 18 Apr 2013 11:33:51 +0000 (14:33 +0300)]
wil6210: Tx init optimization
vring size is known from the beginning, fill it immediately
in the struct initializer
This is minor optimization that reduces code size.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Vladimir Kondratiev [Thu, 18 Apr 2013 11:33:50 +0000 (14:33 +0300)]
wil6210: Use cached copy of Rx descriptor
Rx descriptors stored in non-cacheable memory area for DMA.
Non-cacheable memory causes long access time from CPU.
Copy rx descriptor to the skb->cb, and use this copy.
It provides faster memory access, and will be usefull to keep
Rx information for later processing (BACK reorder)
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Wed, 17 Apr 2013 19:25:58 +0000 (21:25 +0200)]
brcmfmac: stop dequeue upon sk_buff commit failure
In the dequeue worker the function brcmf_commit_skb() is called.
However, instead of increment the credit count upon success it
should break the for loop upon failure. Otherwise, it will result
in an endless loop.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Wed, 17 Apr 2013 19:25:57 +0000 (21:25 +0200)]
brcmfmac: change return type for brcmf_rollback_toq() to void
The function brcmf_rollback_toq() is already called in error path
and its result should not override the initial error value. As the
function releases the sk_buff there is no need to return anything
so change return type to void.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Wed, 17 Apr 2013 19:25:56 +0000 (21:25 +0200)]
brcmfmac: finalize transmit upon any rollback failure
All rollback failures should result in freeing of the sk_buff
by calling brcmf_txfinalize().
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Wed, 17 Apr 2013 19:25:55 +0000 (21:25 +0200)]
brcmfmac: use lock in brcmf_fws_del_interface()
When deleting an interface in firmware-signalling module it will
clear any destination descriptors. To avoid concurrency issues it
should take the lock using brcmf_fws_lock().
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Wed, 17 Apr 2013 19:25:54 +0000 (21:25 +0200)]
brcmfmac: schedule dequeue upon firmware-signal reception
Several firmware signals should be considered as opportunity to
send packets to the firmware. This patch adds conditional scheduling
of the dequeue worker thread while handling those signals.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Wed, 17 Apr 2013 19:25:53 +0000 (21:25 +0200)]
brcmfmac: destination mac closed when interface is closed
Firmware signals a destination is closed as well as an interface. A
destination is associated with an interface. When an interface is
closed consequently the destination should be considered closed as
well.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Wed, 17 Apr 2013 19:25:52 +0000 (21:25 +0200)]
brcmutil: simplify brcmu_pkt_free_skb()
The function brcmu_pkt_free_skb() use skb->destructor to decide
how the sk_buff should be freed. However, when running AP mode
with iptables configured this results in a kernel warning.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Piotr Haber <phaber@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Wed, 17 Apr 2013 19:25:51 +0000 (21:25 +0200)]
brcmfmac: remove error message upon allocation failure
In function brcmf_add_if() an error message is printed
upon alloc_netdev() failure. The allocation failure itself
spews enough info in the log so remove the error message.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Piotr Haber <phaber@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Wed, 17 Apr 2013 19:25:50 +0000 (21:25 +0200)]
brcmfmac: check memory allocation in brcmf_add_if()
For P2P_DEVICE interface the struct brcmf_if instance is
allocated using kzalloc() which can fail. Add pointer
check and return -ENOMEM if it failed. Fixes the following
smatch error:
"drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c:770
brcmf_add_if()
error: potential null dereference 'ifp'. (kzalloc returns null)"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Piotr Haber <phaber@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arend van Spriel [Wed, 17 Apr 2013 19:25:49 +0000 (21:25 +0200)]
brcmfmac: reinitialize dequeue mask per node
The mask was only initialized for the first node, but it should be
done for each node that is handled in the loop.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Wed, 17 Apr 2013 12:30:48 +0000 (14:30 +0200)]
rt2800: nulify all last words of TXWI
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Wed, 17 Apr 2013 12:30:47 +0000 (14:30 +0200)]
rt2x00: provide separate information about TXWI & RXWI sizes
On new 2800 hardware sizes of TXWI & RXIW can be different than TXD
& RXD sizes, so we need to difference between them. Let's define
winfo_size as size of in buffer descriptor (TXWI & RXWI), and desc_size
of as size of additional descriptor - in separate DMA coherent buffer
for PCI hardware (TXD & RXD) and yet another in buffer descriptor for
USB hardware (TXINFO & RXINFO).
Change is rt2x00 wild, but should affect only 2800 driver.
Patch also fix beaconing for 5592usb AP mode.
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Wed, 17 Apr 2013 12:08:20 +0000 (14:08 +0200)]
rt2800: cleanup rt2800_init_rfcsr
This procedure is simple switch now and return no error any longer.
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Wed, 17 Apr 2013 12:08:19 +0000 (14:08 +0200)]
rt2800: add rt2800_normal_mode_setup_3xxx subroutine
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Wed, 17 Apr 2013 12:08:18 +0000 (14:08 +0200)]
rt2800: add rt2800_led_open_drain_enable subroutine
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Wed, 17 Apr 2013 12:08:17 +0000 (14:08 +0200)]
rt2800: move RF_R27 setup to individual rfcsr init subroutines
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Wed, 17 Apr 2013 12:08:16 +0000 (14:08 +0200)]
rt2800: add rt2800_rx_filter_calibration procedure
Add procedure for both bands filter calibration and use it on individual
chipset init rfcsr subroutines.
Remove "Set back to initial state" code for 3290 since vendor driver
DPO_RT3290_LinuxSTA_V2600_20120508 does not include it.
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Wed, 17 Apr 2013 12:08:15 +0000 (14:08 +0200)]
rt2800: move RFCSR6_R2 & LDO_CFG0 setup to 3572 specific rfcsr init
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Wed, 17 Apr 2013 12:08:14 +0000 (14:08 +0200)]
rt2800: move GPIO_SWITCH setup to 3390 specific rfcsr init
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Wed, 17 Apr 2013 12:08:13 +0000 (14:08 +0200)]
rt2800: move 30xx common rf init code
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Wed, 17 Apr 2013 12:08:12 +0000 (14:08 +0200)]
rt2800: move RFCSR29_RSSI_GAIN to 3290 specific rfcsr init
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Wed, 17 Apr 2013 12:08:11 +0000 (14:08 +0200)]
rt2800: move rf init calibration code
Add separate function for rf init calibration code and use it
on all init rf subroutines.
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Wed, 17 Apr 2013 12:08:10 +0000 (14:08 +0200)]
rt2800: merge 5xxx normal mode setup
Merge code which program the same registes at the end of rfcsr
initialization for 5592, 5392 and 5390 chips.
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Tue, 16 Apr 2013 10:51:57 +0000 (12:51 +0200)]
ath9k: always set common->macaddr to the MAC adress of a virtual interface
In some cases it can be useful to change the MAC address of a virtual
interface to something that's completely different from the EEPROM
stored MAC address. In this case it is a bad idea to use the EEPROM MAC
address for calculating the BSSID mask, as that would make it too wide.
In one case a few devices have been observed to send ACKs for many
packets on the channel not directed at them, which results in a neat
Denial of Service attack on the channel.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Tue, 16 Apr 2013 10:51:56 +0000 (12:51 +0200)]
ath: update hardware mac address with bssid mask
Preparation for updating common->macaddr along with virtual interface
MAC address changes.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Carpenter [Tue, 16 Apr 2013 07:51:28 +0000 (10:51 +0300)]
ath9k: use GFP_ATOMIC under spinlock
This is called with spinlocks held so we have to use GFP_ATOMIC. It's
the sc_pcu_lock in ath9k_stop() that's the issue. The call tree looks
like this:
ath9k_stop()
ath_prepare_reset()
ath_stoprecv()
ath_flushrecv()
ath_rx_tasklet()
ath9k_dfs_process_phyerr()
pd->add_pulse() => dpd_add_pulse()
channel_detector_get()
channel_detector_create()
pri_detector_init()
channel_detector_create() uses GFP_ATOMIC as well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Acked-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Zefir Kurtisi [Mon, 15 Apr 2013 09:29:06 +0000 (11:29 +0200)]
ath9k: change DFS logging to use ath_dbg()
The DFS pattern detector was initially planned to reside on
a higher layer and used generic pr_*() logging functions.
Being part of ath9k, use ath_dbg() instead and make DFS log
ouput selectable via ATH_DBG_DFS (0x20000) at runtime.
This patch does not contain functional modifications.
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Alex A. Mihaylov [Mon, 15 Apr 2013 03:29:35 +0000 (07:29 +0400)]
rt2x00: Fix transmit power troubles on some Ralink RT30xx cards
Some cards on Ralink RT30xx chipset not have correctly TX_MIXER_GAIN
value in them EEPROM/EFUSE. In this case, we must use default value,
but always used EEPROM/EFUSE value. As result we have tranmitt power
range from -10dBm to +6dBm instead 0dBm to +16dBm.
Correctly value in EEPROM/EFUSE is one or more for RT3070 and two or
more for other RT30xx chips.
Tested on Canyon CNP-WF518N1 usb Wi-Fi dongle and Jorjin WN8020 usb
embedded Wi-Fi module.
Signed-off-by: Alex A. Mihaylov <minimumlaw@rambler.ru>
Cc: stable@vger.kernel.org
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jonas Gorski [Sun, 14 Apr 2013 12:11:58 +0000 (14:11 +0200)]
mwl8k: remove nonstandard rate 72 Mbps
This rate causes an overflow in the extended rates IE's data rate field,
with the overflowing bit setting the Basic Rate Set membership. This
results in a bogus 8 Mpbs basic rate, making clients checking them refuse
association.
Since the rate is likely unused anyway (HT will yield better rates between
supporting chips), we can just remove it.
This fixes association from wpa_supplicant and Android 4.x and newer.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Mon, 22 Apr 2013 18:58:14 +0000 (14:58 -0400)]
Merge branch 'for-john' of git://git./linux/kernel/git/jberg/mac80211-next
John W. Linville [Mon, 22 Apr 2013 18:56:41 +0000 (14:56 -0400)]
Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth-next