OSDN Git Service
Nicholas Piggin [Sun, 27 Nov 2022 12:49:41 +0000 (22:49 +1000)]
powerpc/64: ELFv2 use minimal stack frames in int and switch frame sizes
Adjust the ELFv2 interrupt and switch frames to the minimum C ABI size,
plus pt_regs, plus 16 bytes for the aligned regs marker for the int
frame (and the switch frame needs to match that because it uses the same
regs offset as the int frame).
This saves 80 bytes of kernel stack per interrupt. It's the principle of
getting our accounting right that's more important than the practical
saving.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-17-npiggin@gmail.com
Nicholas Piggin [Sun, 27 Nov 2022 12:49:40 +0000 (22:49 +1000)]
powerpc: allow minimum sized kernel stack frames
This affects only 64-bit ELFv2 kernels, and reduces the minimum
asm-created stack frame size from 112 to 32 byte on those kernels.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-16-npiggin@gmail.com
Nicholas Piggin [Sun, 27 Nov 2022 12:49:39 +0000 (22:49 +1000)]
powerpc: split validate_sp into two functions
Most callers just want to validate an arbitrary kernel stack pointer,
some need a particular size. Make the size case the exceptional one
with an extra function.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-15-npiggin@gmail.com
Nicholas Piggin [Sun, 27 Nov 2022 12:49:38 +0000 (22:49 +1000)]
powerpc: copy_thread add a back chain to the switch stack frame
Stack unwinders need LR and the back chain as a minimum. The switch
stack uses regs->nip for its return pointer rather than lrsave, so
that was not set in the fork frame, and neither was the back chain.
This change sets those fields in the stack.
With this and the previous change, a stack trace in the switch or
interrupt stack goes from looking like this:
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 3 PID: 90 Comm: systemd Not tainted
NIP:
c000000000011060 LR:
c000000000010f68 CTR:
0000000000007fff
[ ... regs ... ]
NIP [
c000000000011060] _switch+0x160/0x17c
LR [
c000000000010f68] _switch+0x68/0x17c
Call Trace:
To this:
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
CPU: 0 PID: 93 Comm: systemd Not tainted
NIP:
c000000000011060 LR:
c000000000010f68 CTR:
0000000000007fff
[ ... regs ... ]
NIP [
c000000000011060] _switch+0x160/0x17c
LR [
c000000000010f68] _switch+0x68/0x17c
Call Trace:
[
c000000005a93e10] [
c00000000000cdbc] ret_from_fork_scv+0x0/0x54
--- interrupt: 3000 at 0x7fffa72f56d8
NIP:
00007fffa72f56d8 LR:
0000000000000000 CTR:
0000000000000000
[ ... regs ... ]
NIP [
00007fffa72f56d8] 0x7fffa72f56d8
LR [
0000000000000000] 0x0
--- interrupt: 3000
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-14-npiggin@gmail.com
Nicholas Piggin [Sun, 27 Nov 2022 12:49:37 +0000 (22:49 +1000)]
powerpc: copy_thread fill in interrupt frame marker and back chain
Backtraces will not recognise the fork system call interrupt without
the regs marker. And regular interrupt entry from userspace creates
the back chain to the user stack, so do this for the initial fork
frame too, to be consistent.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-13-npiggin@gmail.com
Nicholas Piggin [Sun, 27 Nov 2022 12:49:36 +0000 (22:49 +1000)]
powerpc: add a define for the switch frame size and regs offset
This is open-coded in process.c, ppc32 uses a different define with the
same value, and the C definition is name differently which makes it an
extra indirection to grep for.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-12-npiggin@gmail.com
Nicholas Piggin [Sun, 27 Nov 2022 12:49:35 +0000 (22:49 +1000)]
powerpc: add a define for the user interrupt frame size
The user interrupt frame is a different size from the kernel frame, so
give it its own name.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-11-npiggin@gmail.com
Nicholas Piggin [Sun, 27 Nov 2022 12:49:34 +0000 (22:49 +1000)]
powerpc: Rename STACK_FRAME_MARKER and derive it from frame offset
This is a count of longs from the stack pointer to the regs marker.
Rename it to make it more distinct from the other byte offsets. It
can be derived from the byte offset definitions just added.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-10-npiggin@gmail.com
Nicholas Piggin [Sun, 27 Nov 2022 12:49:33 +0000 (22:49 +1000)]
powerpc: add a definition for the marker offset within the interrupt frame
Define a constant rather than open-code the offset for the
"regs" marker.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-9-npiggin@gmail.com
Nicholas Piggin [Sun, 27 Nov 2022 12:49:32 +0000 (22:49 +1000)]
powerpc: add definition for pt_regs offset within an interrupt frame
This is a common offset that currently uses the overloaded
STACK_FRAME_OVERHEAD constant. It's easier to read and more
flexible to use a specific regs offset for this.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-8-npiggin@gmail.com
Nicholas Piggin [Sun, 27 Nov 2022 12:49:31 +0000 (22:49 +1000)]
powerpc: simplify ppc_save_regs
Adjust the pt_regs pointer so the interrupt frame offsets can be used
to save registers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-7-npiggin@gmail.com
Nicholas Piggin [Sun, 27 Nov 2022 12:49:30 +0000 (22:49 +1000)]
powerpc/pseries: hvcall stack frame overhead
This call may use the min size stack frame. The scratch space used is
in the caller's parameter area frame, not this function's frame.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-6-npiggin@gmail.com
Nicholas Piggin [Sun, 27 Nov 2022 12:49:29 +0000 (22:49 +1000)]
powerpc: Rearrange copy_thread child stack creation
This makes it a bit clearer where the stack frame is created, and will
allow easier use of some of the stack offset constants in a later
change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-5-npiggin@gmail.com
Nicholas Piggin [Sun, 27 Nov 2022 12:49:28 +0000 (22:49 +1000)]
powerpc/perf: callchain validate kernel stack pointer bounds
The interrupt frame detection and loads from the hypothetical pt_regs
are not bounds-checked. The next-frame validation only bounds-checks
STACK_FRAME_OVERHEAD, which does not include the pt_regs. Add another
test for this.
The user could set r1 to be equal to the address matching the first
interrupt frame - STACK_INT_FRAME_SIZE, which is in the previous page
due to the kernel redzone, and induce the kernel to load the marker from
there. Possibly this could cause a crash at least. If the user could
induce the previous page to contain a valid marker, then it might be
able to direct perf to read specific memory addresses in a way that
could be transmitted back to the user in the perf data.
Fixes:
20002ded4d93 ("perf_counter: powerpc: Add callchain support")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-4-npiggin@gmail.com
Nicholas Piggin [Sun, 27 Nov 2022 12:49:27 +0000 (22:49 +1000)]
powerpc/64: Remove asm interrupt tracing call helpers
These are now unused. Remove.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-3-npiggin@gmail.com
Nicholas Piggin [Mon, 28 Nov 2022 04:15:39 +0000 (14:15 +1000)]
powerpc/64: Option to build big-endian with ELFv2 ABI
Provide an option to build big-endian kernels using the ELFv2 ABI. This
works on GCC only for now. Clang is rumored to support this, but core
build files need updating first, at least.
This gives big-endian kernels useful advantages of the ELFv2 ABI, e.g.,
less stack usage, -mprofile-kernel support, better compatibility with
eBPF tools.
BE+ELFv2 is not officially supported by the GNU toolchain, but it works
fine in testing and has been used by some userspace for some time (e.g.,
Void Linux).
Tested-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221128041539.1742489-5-npiggin@gmail.com
Nicholas Piggin [Mon, 28 Nov 2022 04:15:38 +0000 (14:15 +1000)]
powerpc/64: Add big-endian ELFv2 flavour to crypto VMX asm generation
This allows asm generation for big-endian ELFv2 builds.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221128041539.1742489-4-npiggin@gmail.com
Nicholas Piggin [Mon, 28 Nov 2022 04:15:37 +0000 (14:15 +1000)]
powerpc/64: Add module check for ELF ABI version
Override the generic module ELF check to provide a check for the ELF ABI
version. This becomes important if we allow big-endian ELF ABI V2 builds
but it doesn't hurt to check now.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221128041539.1742489-3-npiggin@gmail.com
Nicholas Piggin [Mon, 28 Nov 2022 04:15:36 +0000 (14:15 +1000)]
module: add module_elf_check_arch for module-specific checks
The elf_check_arch() function is also used to test compatibility of
usermode binaries. Kernel modules may have more specific requirements,
for example powerpc would like to test for ABI version compatibility.
Add a weak module_elf_check_arch() that defaults to true, and call it
from elf_validity_check().
Signed-off-by: Jessica Yu <jeyu@kernel.org>
[np: added changelog, adjust name, rebase]
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221128041539.1742489-2-npiggin@gmail.com
Benjamin Gray [Wed, 9 Nov 2022 04:51:12 +0000 (15:51 +1100)]
powerpc/code-patching: Consolidate and cache per-cpu patching context
With the temp mm context support, there are CPU local variables to hold
the patch address and pte. Use these in the non-temp mm path as well
instead of adding a level of indirection through the text_poke_area
vm_struct and pointer chasing the pte.
As both paths use these fields now, there is no need to let unreferenced
variables be dropped by the compiler, so it is cleaner to merge them
into a single context struct. This has the additional benefit of
removing a redundant CPU local pointer, as only one of cpu_patching_mm /
text_poke_area is ever used, while remaining well-typed. It also groups
each CPU's data into a single cacheline.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
[mpe: Shorten name to 'area' as suggested by Christophe]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221109045112.187069-10-bgray@linux.ibm.com
Christopher M. Riedl [Wed, 9 Nov 2022 04:51:11 +0000 (15:51 +1100)]
powerpc/code-patching: Use temporary mm for Radix MMU
x86 supports the notion of a temporary mm which restricts access to
temporary PTEs to a single CPU. A temporary mm is useful for situations
where a CPU needs to perform sensitive operations (such as patching a
STRICT_KERNEL_RWX kernel) requiring temporary mappings without exposing
said mappings to other CPUs. Another benefit is that other CPU TLBs do
not need to be flushed when the temporary mm is torn down.
Mappings in the temporary mm can be set in the userspace portion of the
address-space.
Interrupts must be disabled while the temporary mm is in use. HW
breakpoints, which may have been set by userspace as watchpoints on
addresses now within the temporary mm, are saved and disabled when
loading the temporary mm. The HW breakpoints are restored when unloading
the temporary mm. All HW breakpoints are indiscriminately disabled while
the temporary mm is in use - this may include breakpoints set by perf.
Use the `poking_init` init hook to prepare a temporary mm and patching
address. Initialize the temporary mm using mm_alloc(). Choose a
randomized patching address inside the temporary mm userspace address
space. The patching address is randomized between PAGE_SIZE and
DEFAULT_MAP_WINDOW-PAGE_SIZE.
Bits of entropy with 64K page size on BOOK3S_64:
bits of entropy = log2(DEFAULT_MAP_WINDOW_USER64 / PAGE_SIZE)
PAGE_SIZE=64K, DEFAULT_MAP_WINDOW_USER64=128TB
bits of entropy = log2(128TB / 64K)
bits of entropy = 31
The upper limit is DEFAULT_MAP_WINDOW due to how the Book3s64 Hash MMU
operates - by default the space above DEFAULT_MAP_WINDOW is not
available. Currently the Hash MMU does not use a temporary mm so
technically this upper limit isn't necessary; however, a larger
randomization range does not further "harden" this overall approach and
future work may introduce patching with a temporary mm on Hash as well.
Randomization occurs only once during initialization for each CPU as it
comes online.
The patching page is mapped with PAGE_KERNEL to set EAA[0] for the PTE
which ignores the AMR (so no need to unlock/lock KUAP) according to
PowerISA v3.0b Figure 35 on Radix.
Based on x86 implementation:
commit
4fc19708b165
("x86/alternatives: Initialize temporary mm for patching")
and:
commit
b3fd8e83ada0
("x86/alternatives: Use temporary mm for text poking")
From: Benjamin Gray <bgray@linux.ibm.com>
Synchronisation is done according to ISA 3.1B Book 3 Chapter 13
"Synchronization Requirements for Context Alterations". Switching the mm
is a change to the PID, which requires a CSI before and after the change,
and a hwsync between the last instruction that performs address
translation for an associated storage access.
Instruction fetch is an associated storage access, but the instruction
address mappings are not being changed, so it should not matter which
context they use. We must still perform a hwsync to guard arbitrary
prior code that may have accessed a userspace address.
TLB invalidation is local and VA specific. Local because only this core
used the patching mm, and VA specific because we only care that the
writable mapping is purged. Leaving the other mappings intact is more
efficient, especially when performing many code patches in a row (e.g.,
as ftrace would).
Signed-off-by: Christopher M. Riedl <cmr@bluescreens.de>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
[mpe: Use mm_alloc() per
107b6828a7cd ("x86/mm: Use mm_alloc() in poking_init()")]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221109045112.187069-9-bgray@linux.ibm.com
Benjamin Gray [Wed, 9 Nov 2022 04:51:10 +0000 (15:51 +1100)]
powerpc/tlb: Add local flush for page given mm_struct and psize
Adds a local TLB flush operation that works given an mm_struct, VA to
flush, and page size representation. Most implementations mirror the
surrounding code. The book3s/32/tlbflush.h implementation is left as
a BUILD_BUG because it is more complicated and not required for
anything as yet.
This removes the need to create a vm_area_struct, which the temporary
patching mm work does not need.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221109045112.187069-8-bgray@linux.ibm.com
Benjamin Gray [Wed, 9 Nov 2022 04:51:09 +0000 (15:51 +1100)]
powerpc/mm: Remove flush_all_mm, local_flush_all_mm
These functions were introduced for "cxl: Enable global TLBIs for cxl
contexts" [1], which ended up using them for Radix only. They were never
implemented on Hash (and creating an implementation appears to be
difficult), so nothing can actually rely on them.
They behave differently to the existing surrounding functions too, in
that they actually need to do something on Hash. The other functions
are primarily for use in generic code that expects their definitions,
but Hash updates the TLB during PTE updates.
After replacing the only usage with the Radix specific version, there
are no more users of these functions, and given they are not implemented
anyway it is safe to delete them.
[1]: https://patchwork.ozlabs.org/project/linuxppc-dev/patch/
20170903181513.29635-1-fbarrat@linux.vnet.ibm.com/
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221109045112.187069-7-bgray@linux.ibm.com
Benjamin Gray [Wed, 9 Nov 2022 04:51:08 +0000 (15:51 +1100)]
cxl: Use radix__flush_all_mm instead of generic flush_all_mm
The generic implementation of this function isn't really generic (Hash
is not implemented). Unfortunately, the runtime warnings cannot be
replaced with BUILD_BUG's, so it seems safer not to provide a stub in
the first place.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221109045112.187069-6-bgray@linux.ibm.com
Benjamin Gray [Wed, 9 Nov 2022 04:51:07 +0000 (15:51 +1100)]
powerpc/mm: Remove empty hash__ functions
The empty hash__* functions are unnecessary. The empty definitions were
introduced when 64-bit Hash support was added, as the functions were
still used in generic code. These empty definitions were prefixed with
hash__ when Radix support was added, and new wrappers with the original
names were added that selected the Radix or Hash version based on
radix_enabled().
But the hash__ prefixed functions were not part of a public interface,
so there is no need to include them for compatibility with anything.
Generic code will use the non-prefixed wrappers, and Hash specific code
will know that there is no point in calling them (or even worse, call
them and expect them to do something).
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221109045112.187069-5-bgray@linux.ibm.com
Benjamin Gray [Wed, 9 Nov 2022 04:51:05 +0000 (15:51 +1100)]
powerpc/code-patching: Use WARN_ON and fix check in poking_init
BUG_ON() when failing to initialise the code patching window is
unnecessary, and use of BUG_ON is discouraged. We don't set
poking_init_done in this case, so failure to init the boot CPU will
result in a strict RWX error when a following patch_instruction uses
raw_patch_instruction. If it only fails for later CPUs, they won't be
onlined in the first place.
The return value of cpuhp_setup_state() is also >= 0 on success,
so check for < 0.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221109045112.187069-3-bgray@linux.ibm.com
Jordan Niethe [Wed, 9 Nov 2022 04:51:04 +0000 (15:51 +1100)]
powerpc: Allow clearing and restoring registers independent of saved breakpoint state
For the coming temporary mm used for instruction patching, the
breakpoint registers need to be cleared to prevent them from
accidentally being triggered. As soon as the patching is done, the
breakpoints will be restored.
The breakpoint state is stored in the per-cpu variable current_brk[].
Add a suspend_breakpoints() function which will clear the breakpoint
registers without touching the state in current_brk[]. Add a pair
function restore_breakpoints() which will move the state in
current_brk[] back to the registers.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221109045112.187069-2-bgray@linux.ibm.com
Pali Rohár [Sat, 20 Aug 2022 12:33:27 +0000 (14:33 +0200)]
powerpc/fsl-pci: Choose PCI host bridge with alias pci0 as the primary
If there's no PCI host bridge with ISA then check for PCI host bridge with
alias "pci0" (first PCI host bridge) and if it exists then choose it as the
primary PCI host bridge.
This makes choice of primary PCI host bridge more stable across boots and
updates as the last fallback candidate for primary PCI host bridge (if
there is no choice) is selected arbitrary.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220820123327.20551-1-pali@kernel.org
Pali Rohár [Fri, 30 Sep 2022 12:39:01 +0000 (14:39 +0200)]
powerpc: dts: turris1x.dts: Add channel labels for temperature sensor
Channel 0 of SA56004ED chip refers to internal SA56004ED chip sensor (chip
itself is located on the board) and channel 1 of SA56004ED chip refers to
external sensor which is connected to temperature diode of the P2020 CPU.
Fixes:
54c15ec3b738 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220930123901.10251-1-pali@kernel.org
Thomas Weißschuh [Sat, 26 Nov 2022 05:10:00 +0000 (06:10 +0100)]
powerpc/book3e: remove #include <generated/utsrelease.h>
Commit
7ad4bd887d27 ("powerpc/book3e: get rid of #include <generated/compile.h>")
removed the usage of the define UTS_RELEASE but forgot to drop the
include.
utsrelease.h is potentially generated on each build. By removing the
unused include we can get rid of some spurious recompilations.
Fixes:
7ad4bd887d27 ("powerpc/book3e: get rid of #include <generated/compile.h>")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix typo in change log and add more explanation]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221126051002.123199-2-linux@weissschuh.net
Naveen N. Rao [Tue, 22 Nov 2022 06:40:54 +0000 (12:10 +0530)]
selftests/powerpc: Account for offline cpus in perf-hwbreak test
For systemwide tests, use online cpu mask to only open events on online
cpus. This enables this test to work on systems in lower SMT modes.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/15fd447dcefd19945a7d31f0a475349f548a3603.1669096083.git.naveen.n.rao@linux.vnet.ibm.com
Naveen N. Rao [Tue, 22 Nov 2022 06:40:53 +0000 (12:10 +0530)]
selftests/powerpc: Bump up rlimit for perf-hwbreak test
The systemwide perf hardware breakpoint test tries to open a perf event
on each cpu. On large systems, we run out of file descriptors and fail
the test. Instead, have the test set the file descriptor limit to an
arbitraty high value.
Reported-by: Rohan Deshpande <rohan_d@linux.vnet.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/187fed5843cecc1e5066677b6296ee88337d7bef.1669096083.git.naveen.n.rao@linux.vnet.ibm.com
Naveen N. Rao [Tue, 22 Nov 2022 06:40:52 +0000 (12:10 +0530)]
selftests/powerpc: Move perror closer to its use
Right now, if perf_event_open() fails for the systemwide tests, error
report is printed too late, sometimes after subsequent system calls.
Move use of perror() to the main function, just after the syscall.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/372ac78c27899f1f612fbd6ac796604a4a9310aa.1669096083.git.naveen.n.rao@linux.vnet.ibm.com
Christoph Hellwig [Tue, 22 Nov 2022 07:22:25 +0000 (08:22 +0100)]
powerpc/ps3: mark ps3_system_bus_type static
ps3_system_bus_type is only used inside of system-bus.c, so remove
the external declaration and the very outdated comment next to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221122072225.423432-1-hch@lst.de
Michael Ellerman [Wed, 30 Nov 2022 10:46:06 +0000 (21:46 +1100)]
Merge branch 'fixes' into next
Merge our fixes branch to bring in some changes that are prerequisites
for work in next.
Michael Ellerman [Wed, 30 Nov 2022 09:42:22 +0000 (20:42 +1100)]
Merge branch 'topic/ppc-kvm' into next
Merge our KVM topic branch.
Nicholas Piggin [Sun, 27 Nov 2022 12:49:26 +0000 (22:49 +1000)]
KVM: PPC: Book3E: Fix CONFIG_TRACE_IRQFLAGS support
32-bit does not trace_irqs_off() to match the trace_irqs_on() call in
kvmppc_fix_ee_before_entry(). This can lead to irqs being enabled twice
in the trace, and the irqs-off region between guest exit and the host
enabling local irqs again is not properly traced.
64-bit code does call this, but from asm code where volatiles are live
and so incorrectly get clobbered.
Move the irq reconcile into C to fix both problems.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-2-npiggin@gmail.com
Michael Ellerman [Fri, 25 Nov 2022 11:34:42 +0000 (22:34 +1100)]
powerpc/64s: Add missing declaration for machine_check_early_boot()
There's no declaration for machine_check_early_boot(), which leads to a
build failure with W=1. Add one.
Fixes:
2f5182cffa43 ("powerpc/64s: early boot machine check handler")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221125132521.2167039-1-mpe@ellerman.id.au
Tiezhu Yang [Fri, 18 Nov 2022 09:40:29 +0000 (17:40 +0800)]
powerpc: Use "grep -E" instead of "egrep"
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the related file to use "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl arch/powerpc`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1668764429-11540-1-git-send-email-yangtiezhu@loongson.cn
Nayna Jain [Sun, 6 Nov 2022 20:58:39 +0000 (15:58 -0500)]
powerpc/pseries: fix plpks_read_var() code for different consumers
Even though plpks_read_var() is currently called to read variables
owned by different consumers, it internally supports only OS consumer.
Fix plpks_read_var() to handle different consumers correctly.
Fixes:
2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221106205839.600442-7-nayna@linux.ibm.com
Nayna Jain [Sun, 6 Nov 2022 20:58:38 +0000 (15:58 -0500)]
powerpc/pseries: replace kmalloc with kzalloc in PLPKS driver
Replace kmalloc with kzalloc in construct_auth() function to default
initialize structure with zeroes.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221106205839.600442-6-nayna@linux.ibm.com
Nayna Jain [Sun, 6 Nov 2022 20:58:37 +0000 (15:58 -0500)]
powerpc/pseries: cleanup error logs in plpks driver
Logging H_CALL return codes in PLPKS driver are easy to confuse with
Linux error codes.
Let the caller of the function log the converted linux error code.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221106205839.600442-5-nayna@linux.ibm.com
Nayna Jain [Sun, 6 Nov 2022 20:58:36 +0000 (15:58 -0500)]
powerpc/pseries: Return -EIO instead of -EINTR for H_ABORTED error
Some commands for eg. "cat" might continue to retry on encountering
EINTR. This is not expected for original error code H_ABORTED.
Map H_ABORTED to more relevant Linux error code EIO.
Fixes:
2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221106205839.600442-4-nayna@linux.ibm.com
Nayna Jain [Sun, 6 Nov 2022 20:58:35 +0000 (15:58 -0500)]
powerpc/pseries: Fix the H_CALL error code in PLPKS driver
PAPR Spec defines H_P1 actually as H_PARAMETER and maps H_ABORTED to
a different numerical value.
Fix the error codes as per PAPR Specification.
Fixes:
2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221106205839.600442-3-nayna@linux.ibm.com
Nayna Jain [Sun, 6 Nov 2022 20:58:34 +0000 (15:58 -0500)]
powerpc/pseries: fix the object owners enum value in plpks driver
OS_VAR_LINUX enum in PLPKS driver should be 0x02 instead of 0x01.
Fixes:
2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221106205839.600442-2-nayna@linux.ibm.com
Chen Lifu [Thu, 3 Nov 2022 07:01:22 +0000 (15:01 +0800)]
powerpc/powermac: Fix symbol not declared warnings
1. ppc_override_l2cr and ppc_override_l2cr_value are only used in
l2cr_init() function, remove them and used *l2cr directly.
2. has_l2cache is not used outside of the file, so mark it static and
do not initialise statics to 0.
Fixes the following warnings:
arch/powerpc/platforms/powermac/setup.c:73:5: warning: symbol
'ppc_override_l2cr' was not declared. Should it be static?
arch/powerpc/platforms/powermac/setup.c:74:5: warning: symbol
'ppc_override_l2cr_value' was not declared. Should it be static?
arch/powerpc/platforms/powermac/setup.c:75:5: warning: symbol
'has_l2cache' was not declared. Should it be static?
Signed-off-by: Chen Lifu <chenlifu@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Unwrap printk string]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221103070122.340773-1-chenlifu@huawei.com
Bo Liu [Mon, 31 Oct 2022 06:37:06 +0000 (02:37 -0400)]
powerpc/pseries/eeh: Fix some kernel-doc warnings
Fixes the following W=1 kernel build warning(s):
arch/powerpc/platforms/pseries/eeh_pseries.c:163: warning: Function parameter or member 'config_addr' not described in 'pseries_eeh_phb_reset'
arch/powerpc/platforms/pseries/eeh_pseries.c:163: warning: Excess function parameter 'config_adddr' description in 'pseries_eeh_phb_reset'
arch/powerpc/platforms/pseries/eeh_pseries.c:198: warning: Function parameter or member 'config_addr' not described in 'pseries_eeh_phb_configure_bridge'
arch/powerpc/platforms/pseries/eeh_pseries.c:198: warning: Excess function parameter 'config_adddr' description in 'pseries_eeh_phb_configure_bridge'
Signed-off-by: Bo Liu <liubo03@inspur.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221031063706.2770-1-liubo03@inspur.com
Russell Currey [Mon, 24 Oct 2022 04:13:46 +0000 (15:13 +1100)]
powerpc/8xx: Fix warning in hw_breakpoint_handler()
In hw_breakpoint_handler(), ea is set by wp_get_instr_detail() except
for 8xx, leading the variable to be passed uninitialised to
wp_check_constraints(). This is safe as wp_check_constraints() returns
early without using ea, so just set it to make the compiler happy.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221024041346.103608-1-ruscur@russell.cc
Shaomin Deng [Sat, 29 Oct 2022 09:46:43 +0000 (05:46 -0400)]
selftests/powerpc: Remove repeated word in comments
Remove the repeated word "not" in comments.
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221029094643.5595-1-dengshaomin@cdjrlc.com
Colin Ian King [Fri, 21 Oct 2022 08:45:45 +0000 (09:45 +0100)]
selftests/powerpc: Fix spelling mistake "mmaping" -> "mmapping"
There is a spelling mistake in a perror message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221021084545.65973-1-colin.i.king@gmail.com
Naveen N. Rao [Thu, 20 Oct 2022 17:28:59 +0000 (22:58 +0530)]
powerpc/kprobes: Use preempt_enable() rather than the no_resched variant
preempt_enable_no_resched() is just the same as preempt_enable() when we
are in a irqs disabled context. kprobe_handler() and the post/fault
handlers are all called with irqs disabled. As such, convert those to
just use preempt_enable().
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/72639f75fe66f931ec8c2165276ffbfb0fe1006f.1666262278.git.naveen.n.rao@linux.vnet.ibm.com
Naveen N. Rao [Thu, 20 Oct 2022 17:28:58 +0000 (22:58 +0530)]
powerpc/kprobes: Have optimized_callback() use preempt_enable()
Similar to x86 commit
2e62024c265aa6 ("kprobes/x86: Use preempt_enable()
in optimized_callback()"), change powerpc optprobes to use
preempt_enable() rather than preempt_enable_no_resched() since powerpc
also removed irq disabling for optprobes in commit
f72180cc93a2c6
("powerpc/kprobes: Do not disable interrupts for optprobes and
kprobes_on_ftrace").
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1885bab182626c33d9bf6421f430abf924c521a5.1666262278.git.naveen.n.rao@linux.vnet.ibm.com
Naveen N. Rao [Thu, 20 Oct 2022 17:28:57 +0000 (22:58 +0530)]
powerpc/kprobes: Remove preempt disable around call to get_kprobe() in arch_prepare_kprobe()
arch_prepare_kprobe() is called from register_kprobe() via
prepare_kprobe(), or through register_aggr_kprobe(), both with the
kprobe_mutex held. Per the comment for get_kprobe():
/*
* This routine is called either:
* - under the 'kprobe_mutex' - during kprobe_[un]register().
* OR
* - with preemption disabled - from architecture specific code.
*/
As such, there is no need to disable preemption around the call to
get_kprobe(). Drop the same.
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1043d06a0affed83a4a46dd29466e72820ee215d.1666262278.git.naveen.n.rao@linux.vnet.ibm.com
ruanjinjie [Wed, 19 Oct 2022 06:34:14 +0000 (14:34 +0800)]
powerpc/mpic_msgr: fix cast removes address space of expression warnings
When build Linux kernel, encounter the following warnings:
./arch/powerpc/sysdev/mpic_msgr.c:230:38: warning: cast removes address space '__iomem' of expression
./arch/powerpc/sysdev/mpic_msgr.c:230:27: warning: incorrect type in assignment (different address spaces)
The data type of msgr->mer and msgr->base are 'u32 __iomem *', but
converted to 'u32 *' and 'u8 *' directly and cause above warnings, now
instead of using a type cast, change the size of the pointer offset to fix
these warnings.
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221019063414.3758087-1-ruanjinjie@huawei.com
Yang Yingliang [Mon, 17 Oct 2022 03:23:33 +0000 (11:23 +0800)]
powerpc/xive: add missing iounmap() in error path in xive_spapr_populate_irq_data()
If remapping 'data->trig_page' fails, the 'data->eoi_mmio' need be unmapped
before returning from xive_spapr_populate_irq_data().
Fixes:
eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221017032333.1852406-1-yangyingliang@huawei.com
Stephen Rothwell [Mon, 10 Oct 2022 05:57:21 +0000 (16:57 +1100)]
powerpc: suppress some linker warnings in recent linker versions
This is a follow on from commit
0d362be5b142 ("Makefile: link with -z noexecstack --no-warn-rwx-segments")
for arch/powerpc/boot to address wanrings like:
ld: warning: opal-calls.o: missing .note.GNU-stack section implies executable stack
ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
ld: warning: arch/powerpc/boot/zImage.epapr has a LOAD segment with RWX permissions
This fixes issue https://github.com/linuxppc/issues/issues/417
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221010165721.106267e6@canb.auug.org.au
Christophe JAILLET [Sun, 9 Oct 2022 10:49:50 +0000 (12:49 +0200)]
powerpc/sysdev: Remove some duplicate prefix in some messages
At the beginning of the file, we have:
#define pr_fmt(fmt) "xive: " fmt
So, there is no need to duplicate "XIVE:" in debug and error messages.
For the records, these useless prefix have been added in commit
5af50993850a ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt
controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7b8b5915a2c7c1616b33e8433ebe0a0bf07070a2.1665312579.git.christophe.jaillet@wanadoo.fr
Nicholas Piggin [Thu, 6 Oct 2022 10:56:53 +0000 (20:56 +1000)]
powerpc: remove the last remnants of cputime_t
cputime_t was a core kernel type, removed by commits
ed5c8c854f2b..
b672592f0221. As explained in commit
b672592f0221
("sched/cputime: Remove generic asm headers"), the final cleanup
is for the arch to provide cputime_to_nsec[s](). Commit
ade7667a981b
("powerpc: Add cputime_to_nsecs()") did that, but justdidn't remove
the then-unused cputime_to_usecs(), cputime_t type, and associated
remnants.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221006105653.115829-1-npiggin@gmail.com
Michael Ellerman [Thu, 6 Oct 2022 03:20:19 +0000 (14:20 +1100)]
powerpc: Print instruction dump on a single line
Although the previous commit made the powerpc instruction dump usable
with scripts/decodecode, there are still some problems.
Because the dump is split across multiple lines, the script doesn't cope
with printk timestamps or caller info.
That can be fixed by printing the entire dump on one line, eg:
[ 12.016307][ T112] --- interrupt: c00
[ 12.016605][ T112] Code:
4b7aae15 60000000 3d22016e 3c62ffec 39291160 38639bc0 e8890000 4b7aadf9 60000000 4bfffee8 7c0802a6 60000000 <
0fe00000>
60420000 3c4c008f 384268a0
[ 12.017655][ T112] ---[ end trace
0000000000000000 ]---
That output can then be piped directly into scripts/decodecode and
interpreted correctly.
Printing the dump on a single line does produce a very long line, about
173 characters. That is still shorter than x86, which prints nearly 200
characters even without timestamps etc.
All consoles I'm aware of will wrap the line if it's too long, so the
length should not be a functional problem. If anything it should help on
consoles like VGA by using less vertical space.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221006032019.1128624-2-mpe@ellerman.id.au
Michael Ellerman [Thu, 6 Oct 2022 03:20:18 +0000 (14:20 +1100)]
powerpc: Make instruction dump work with scripts/decodecode
Matt reported that scripts/decodecode doesn't work for the instruction
dump in the powerpc oops output. Although there are scripts around that
can decode it, it would be preferable if the standard in-tree script
worked.
All other arches prefix the instruction dump with "Code:", and that's
what the script looks for, so use that.
The script then works as expected:
$ CROSS_COMPILE=powerpc64le-linux-gnu- ./scripts/decodecode
Code:
fbc1fff0 f821ffc1 7c7d1b78 7c9c2378 ebc30028 7fdff378 48000018 60000000
60000000 ebff0008 7c3ef840 41820048 <
815f0060>
e93f0000 5529077c 7d295378
^D
All code
========
0: f0 ff c1 fb std r30,-16(r1)
4: c1 ff 21 f8 stdu r1,-64(r1)
8: 78 1b 7d 7c mr r29,r3
...
Note that the script doesn't cope well with printk timestamps or printk
caller info.
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221006032019.1128624-1-mpe@ellerman.id.au
Joel Stanley [Fri, 30 Sep 2022 06:50:12 +0000 (16:20 +0930)]
powerpc/microwatt: Add litesd
This is the register layout of the litesd peripheral for the fusesoc
based Microwatt SoC.
It requires a description of the system clock, which is hardcoded to
100MHz.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220930065012.2860577-1-joel@jms.id.au
Christophe Leroy [Wed, 28 Sep 2022 06:29:22 +0000 (08:29 +0200)]
powerpc/8xx: Reverse order entries are written by __set_pte_at()
At the time being, with 16k pages __set_pte_at() writes table entries
in reverse order:
294: 91 49 00 0c stw r10,12(r9)
298: 91 49 00 08 stw r10,8(r9)
29c: 91 49 00 04 stw r10,4(r9)
2a0: 91 49 00 00 stw r10,0(r9)
Allthough there should be no impact at all as it stays in a single
cacheline, reverse the writing in a more natural order.
288: 91 49 00 0c stw r10,0(r9)
28c: 91 49 00 08 stw r10,4(r9)
290: 91 49 00 04 stw r10,8(r9)
294: 91 49 00 00 stw r10,12(r9)
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/67c3b5d44edfec054234ea9b4d05fc4b4f7f8a0e.1664346554.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 28 Sep 2022 06:29:00 +0000 (08:29 +0200)]
powerpc/8xx: Simplify pte_update() with 16k pages
While looking at code generated for code patching, I saw that
pte_clear generated:
2d8: 38 a0 00 00 li r5,0
2dc: 38 e0 10 00 li r7,4096
2e0: 39 00 20 00 li r8,8192
2e4: 39 40 30 00 li r10,12288
2e8: 90 a9 00 00 stw r5,0(r9)
2ec: 90 e9 00 04 stw r7,4(r9)
2f0: 91 09 00 08 stw r8,8(r9)
2f4: 91 49 00 0c stw r10,12(r9)
With 16k pages, only the first entry is used by the kernel, so no need
to adapt the address of other entries. Only duplicate the first entry
for hardware.
Now it is:
2cc: 39 40 00 00 li r10,0
2d0: 91 49 00 00 stw r10,0(r9)
2d4: 91 49 00 04 stw r10,4(r9)
2d8: 91 49 00 08 stw r10,8(r9)
2dc: 91 49 00 0c stw r10,12(r9)
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/65f76300de07091a59a042a3db2d0ce9b939a05c.1664346532.git.christophe.leroy@csgroup.eu
Dmitry Torokhov [Tue, 27 Sep 2022 19:23:58 +0000 (12:23 -0700)]
powerpc/sgy_cts1000: convert to using gpiod API and facelift
This patch converts the driver to newer gpiod API, and away from
OF-specific legacy gpio API that we want to stop using.
While at it, let's address a few more issues:
- switch to using dev_info()/pr_info() and friends
- cancel work when unbinding the driver
Note that the original code handled halt GPIO polarity incorrectly:
in halt callback, when line polarity is "low" it would set trigger to
"1" and drive halt line high, which is counter to the annotation.
gpiod API will drive such line low. However I do not see any DTSes
in mainline that have a DT node with "sgy,gpio-halt" compatible.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YzNNznewTyCJiGFz@google.com
Dmitry Torokhov [Tue, 27 Sep 2022 06:03:25 +0000 (23:03 -0700)]
powerpc/warp: switch to using gpiod API
This switches PIKA Warp away from legacy gpio API and to newer gpiod
API, so that we can eventually deprecate the former.
Because LEDs are normally driven by leds-gpio driver, but the
platform code also wants to access the LEDs during thermal shutdown,
and gpiod API does not allow locating GPIO without requesting it,
the platform code is now responsible for locating GPIOs through device
tree and requesting them. It then constructs platform data for
leds-gpio platform device and registers it. This allows platform
code to retain access to LED GPIO descriptors and use them when needed.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YzKSLcrYmV5kjyeX@google.com
Gustavo A. R. Silva [Fri, 16 Sep 2022 14:15:04 +0000 (15:15 +0100)]
powerpc/xmon: Fix -Wswitch-unreachable warning in bpt_cmds
When building with automatic stack variable initialization, GCC 12
complains about variables defined outside of switch case statements.
Move the variable into the case that uses it, which silences the warning:
arch/powerpc/xmon/xmon.c: In function ‘bpt_cmds’:
arch/powerpc/xmon/xmon.c:1529:13: warning: statement will never be executed [-Wswitch-unreachable]
1529 | int mode;
| ^~~~
Fixes:
09b6c1129f89 ("powerpc/xmon: Fix compile error with PPC_8xx=y")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YySE6FHiOcbWWR+9@work
Kajol Jain [Fri, 16 Sep 2022 10:57:36 +0000 (16:27 +0530)]
powerpc/kvm: Remove unused references for MMCR3/SIER2/SIER3 registers
Commit
57dc0eed73ca ("KVM: PPC: Book3S HV P9: Implement PMU save/restore
in C") removed the PMU save/restore functions from assembly code and
implemented these functions in C, for power9 and later platforms.
After the code refactoring, Performance Monitoring Unit (PMU) registers
became part of "p9_host_os_sprs" structure and now this structure is
used to save/restore pmu host registers, for power9 and later platfroms.
But we still have old unused registers references. Patch removes unused
host_mmcr references for Monitor Mode Control Register 3 (MMCR3)/
Sampled Instruction Event Register 2 (SIER2)/ SIER3 registers from
"struct kvmppc_host_state".
Fixes:
57dc0eed73ca ("KVM: PPC: Book3S HV P9: Implement PMU save/restore in C")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916105736.268153-3-disgoel@linux.vnet.ibm.com
Disha Goel [Fri, 16 Sep 2022 10:57:35 +0000 (16:27 +0530)]
powerpc/kvm: Remove unused macros from asm-offset
The kvm code was refactored to convert some of kvm assembly routines to C.
This includes commits which moved code path for the kvm guest entry/exit
for p7/8 from aseembly to C. As part of the code changes, usage of some of
the macros were removed. But definitions still exist in the assembly files.
Commits are listed below:
Commit
2e1ae9cd56f8 ("KVM: PPC: Book3S HV: Implement radix prefetch workaround by disabling MMU")
Commit
9769a7fd79b6 ("KVM: PPC: Book3S HV: Remove radix guest support from P7/8 path")
Commit
fae5c9f3664b ("KVM: PPC: Book3S HV: remove ISA v3.0 and v3.1 support from P7/8 path")
Commit
57dc0eed73ca ("KVM: PPC: Book3S HV P9: Implement PMU save/restore in C")
Many of the asm-offset macro definitions were missed to remove. Patch
fixes by removing the unused macros.
Signed-off-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916105736.268153-2-disgoel@linux.vnet.ibm.com
Xiu Jianfeng [Sun, 11 Sep 2022 08:43:44 +0000 (16:43 +0800)]
powerpc/pasemi: Add __init/__exit annotations to module init/exit funcs
Add missing __init/__exit annotations to module init/exit funcs.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220911084344.196353-1-xiujianfeng@huawei.com
Nicholas Piggin [Fri, 9 Sep 2022 05:23:12 +0000 (15:23 +1000)]
powerpc: add compile-time support for lbarx, lharx
ISA v2.06 (POWER7 and up) as well as e6500 support lbarx and lharx.
Add a compile option that allows code to use it, and add support in
cmpxchg and xchg 8 and 16 bit values without shifting and masking.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220909052312.63916-1-npiggin@gmail.com
Shaomin Deng [Sun, 4 Sep 2022 15:51:02 +0000 (11:51 -0400)]
drivers/ps3: Fix double word in comments
Drop the repeated word "when" in comments.
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220904155102.26957-1-dengshaomin@cdjrlc.com
Nicholas Miehlbradt [Wed, 10 Aug 2022 04:03:21 +0000 (04:03 +0000)]
docs: powerpc: add POWER9 and POWER10 to CPU families
Add POWER9 and POWER10 to CPU families and list Radix MMU.
Signed-off-by: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220810040321.375396-1-nicholas@linux.ibm.com
Naveen N. Rao [Tue, 9 Aug 2022 10:54:25 +0000 (16:24 +0530)]
powerpc/ftrace: Ignore weak functions
Extend commit
b39181f7c6907d ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to
avoid adding weak function") to ppc32 and ppc64 -mprofile-kernel by
defining FTRACE_MCOUNT_MAX_OFFSET.
For ppc64 -mprofile-kernel ABI, we can have two instructions at function
entry for TOC setup followed by 'mflr r0' and 'bl _mcount'. So, the
mcount location is at most the 4th instruction in a function. For ppc32,
mcount location is always the 3rd instruction in a function, preceded by
'mflr r0' and 'stw r0,4(r1)'.
With this patch, and with ppc64le_guest_defconfig and some ftrace/bpf
config items enabled:
# grep __ftrace_invalid_address available_filter_functions | wc -l
79
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220809105425.424045-1-naveen.n.rao@linux.vnet.ibm.com
Deming Wang [Fri, 1 Jul 2022 09:45:53 +0000 (05:45 -0400)]
powerpc/pseries: Fix formatting to make code look more beautiful
Operators should be separated by spaces in tce_buildmulti_pSeriesLP()
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220701094553.1722-1-wangdeming@inspur.com
Yang Yingliang [Mon, 21 Nov 2022 15:43:39 +0000 (23:43 +0800)]
ocxl: fix pci device refcount leak when calling get_function_0()
get_function_0() calls pci_get_domain_bus_and_slot(), as comment
says, it returns a pci device with refcount increment, so after
using it, pci_dev_put() needs be called.
Get the device reference when get_function_0() is not called, so
pci_dev_put() can be called in the error path and callers
unconditionally. And add comment above get_dvsec_vendor0() to tell
callers to call pci_dev_put().
Fixes:
87db7579ebd5 ("ocxl: control via sysfs whether the FPGA is reloaded on a link reset")
Suggested-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221121154339.4088935-1-yangyingliang@huawei.com
Yang Yingliang [Fri, 11 Nov 2022 14:59:29 +0000 (22:59 +0800)]
ocxl: fix possible name leak in ocxl_file_register_afu()
If device_register() returns error in ocxl_file_register_afu(),
the name allocated by dev_set_name() need be freed. As comment
of device_register() says, it should use put_device() to give
up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup(),
and info is freed in info_release().
Fixes:
75ca758adbaf ("ocxl: Create a clear delineation between ocxl backend & frontend")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221111145929.2429271-1-yangyingliang@huawei.com
Yang Yingliang [Fri, 11 Nov 2022 14:54:40 +0000 (22:54 +0800)]
cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter()
If device_register() fails in cxl_pci_afu|adapter(), the device
is not added, device_unregister() can not be called in the error
path, otherwise it will cause a null-ptr-deref because of removing
not added device.
As comment of device_register() says, it should use put_device() to give
up the reference in the error path. So split device_unregister() into
device_del() and put_device(), then goes to put dev when register fails.
Fixes:
f204e0b8cedd ("cxl: Driver code for powernv PCIe based cards for userspace access")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221111145440.2426970-2-yangyingliang@huawei.com
Yang Yingliang [Fri, 11 Nov 2022 14:54:39 +0000 (22:54 +0800)]
cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter()
If device_register() fails in cxl_register_afu|adapter(), the device
is not added, device_unregister() can not be called in the error path,
otherwise it will cause a null-ptr-deref because of removing not added
device.
As comment of device_register() says, it should use put_device() to give
up the reference in the error path. So split device_unregister() into
device_del() and put_device(), then goes to put dev when register fails.
Fixes:
14baf4d9c739 ("cxl: Add guest-specific code")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221111145440.2426970-1-yangyingliang@huawei.com
Miaoqian Lin [Sun, 5 Jun 2022 06:00:38 +0000 (10:00 +0400)]
cxl: Fix refcount leak in cxl_calc_capp_routing
of_get_next_parent() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
This function only calls of_node_put() in normal path,
missing it in the error path.
Add missing of_node_put() to avoid refcount leak.
Fixes:
f24be42aab37 ("cxl: Add psl9 specific code")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220605060038.62217-1-linmq006@gmail.com
Julia Lawall [Sat, 21 May 2022 11:11:32 +0000 (13:11 +0200)]
cxl: fix typo in comment
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220521111145.81697-82-Julia.Lawall@inria.fr
Deming Wang [Wed, 13 Apr 2022 10:55:07 +0000 (06:55 -0400)]
powerpc/xive: remove unused parameter
The parameter xc to xive_cleanup_single_escalation() is unused, so we
can remove it.
Signed-off-by: Deming Wang <wangdeming@inspur.com>
[mpe: Reword change log, unwrap lines < 90 columns]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220413105507.1729-1-wangdeming@inspur.com
Randy Dunlap [Thu, 24 Nov 2022 06:19:18 +0000 (22:19 -0800)]
powerpc/mpc52xx_lpbfifo: fix all kernel-doc warnings
Fix multiple kernel-doc warnings in mpc52xx_lpbfifo.c:
arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c:377: warning: expecting prototype for mpc52xx_lpbfifo_bcom_poll(). Prototype was for mpc52xx_lpbfifo_poll() instead
mpc52xx_lpbfifo.c:221: warning: No description found for return value of 'mpc52xx_lpbfifo_irq'
mpc52xx_lpbfifo.c:327: warning: No description found for return value of 'mpc52xx_lpbfifo_bcom_irq'
mpc52xx_lpbfifo.c:398: warning: No description found for return value of 'mpc52xx_lpbfifo_submit'
mpc52xx_lpbfifo.c:64: warning: Function parameter or member 'req' not described in 'mpc52xx_lpbfifo_kick'
mpc52xx_lpbfifo.c:220: warning: contents before sections
mpc52xx_lpbfifo.c:223: warning: Function parameter or member 'irq' not described in 'mpc52xx_lpbfifo_irq'
mpc52xx_lpbfifo.c:223: warning: Function parameter or member 'dev_id' not described in 'mpc52xx_lpbfifo_irq'
mpc52xx_lpbfifo.c:328: warning: contents before sections
mpc52xx_lpbfifo.c:331: warning: Function parameter or member 'irq' not described in 'mpc52xx_lpbfifo_bcom_irq'
mpc52xx_lpbfifo.c:331: warning: Function parameter or member 'dev_id' not described in 'mpc52xx_lpbfifo_bcom_irq'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221124061918.1967-1-rdunlap@infradead.org
Christophe Leroy [Wed, 9 Mar 2022 09:29:50 +0000 (10:29 +0100)]
powerpc: Remove find_current_mm_pte()
Last usage of find_current_mm_pte() was removed by
commit
15759cb054ef ("powerpc/perf/callchain: Use
__get_user_pages_fast in read_user_stack_slow")
Remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ec79f462a3bfa8365b7df505e574d5d85246bc68.1646818177.git.christophe.leroy@csgroup.eu
Christophe JAILLET [Sat, 29 Jan 2022 07:16:04 +0000 (08:16 +0100)]
powerpc/52xx: Fix a resource leak in an error handling path
The error handling path of mpc52xx_lpbfifo_probe() has a request_irq()
that is not balanced by a corresponding free_irq().
Add the missing call, as already done in the remove function.
Fixes:
3c9059d79f5e ("powerpc/5200: add LocalPlus bus FIFO device driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dec1496d46ccd5311d0f6e9f9ca4238be11bf6a6.1643440531.git.christophe.jaillet@wanadoo.fr
Xie Shaowen [Tue, 2 Aug 2022 07:41:48 +0000 (15:41 +0800)]
macintosh/macio-adb: check the return value of ioremap()
The function ioremap() in macio_init() can fail, so its return value
should be checked.
Fixes:
36874579dbf4c ("[PATCH] powerpc: macio-adb build fix")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: Xie Shaowen <studentxswpy@163.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220802074148.3213659-1-studentxswpy@163.com
Yang Yingliang [Fri, 4 Nov 2022 03:25:51 +0000 (11:25 +0800)]
macintosh: fix possible memory leak in macio_add_one_device()
Afer commit
1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically. It
needs to be freed when of_device_register() fails. Call put_device() to
give up the reference that's taken in device_initialize(), so that it
can be freed in kobject_cleanup() when the refcount hits 0.
macio device is freed in macio_release_dev(), so the kfree() can be
removed.
Fixes:
1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221104032551.1075335-1-yangyingliang@huawei.com
Yang Yingliang [Fri, 16 Sep 2022 14:16:38 +0000 (22:16 +0800)]
macintosh: Switch to use for_each_child_of_node() macro
Use for_each_child_of_node() macro instead of open coding it.
No functional change.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916141638.685575-1-yangyingliang@huawei.com
Li zeming [Thu, 7 Jul 2022 01:59:49 +0000 (09:59 +0800)]
macintosh/windfarm_pid: Add header file macro definition
I think the header file could avoid redefinition errors at compile time
by adding macro definitions.
Signed-off-by: Li zeming <zeming@nfschina.com>
[mpe: Add endif comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220707015949.3733-1-zeming@nfschina.com
Li zeming [Thu, 7 Jul 2022 01:53:52 +0000 (09:53 +0800)]
macintosh/ams/ams: Add header file macro definition
Add header file macro definition.
Signed-off-by: Li zeming <zeming@nfschina.com>
[mpe: Add endif comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220707015352.3391-1-zeming@nfschina.com
Stephen Kitt [Thu, 16 Jun 2022 17:04:24 +0000 (19:04 +0200)]
macintosh/via-pmu-backlight: Use backlight helper
backlight_properties.fb_blank is deprecated. The states it represents
are handled by other properties; but instead of accessing those
properties directly, drivers should use the helpers provided by
backlight.h.
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220616170425.1346081-1-steve@sk2.org
Finn Thain [Mon, 21 Mar 2022 09:28:00 +0000 (20:28 +1100)]
macintosh/via-pmu: Avoid compiler warnings when CONFIG_PROC_FS is disabled
drivers/macintosh/via-pmu.c:897:12: warning: 'pmu_battery_proc_show' defined but not used [-Wunused-function]
static int pmu_battery_proc_show(struct seq_file *m, void *v)
^~~~~~~~~~~~~~~~~~~~~
drivers/macintosh/via-pmu.c:871:12: warning: 'pmu_irqstats_proc_show' defined but not used [-Wunused-function]
static int pmu_irqstats_proc_show(struct seq_file *m, void *v)
^~~~~~~~~~~~~~~~~~~~~~
drivers/macintosh/via-pmu.c:860:12: warning: 'pmu_info_proc_show' defined but not used [-Wunused-function]
static int pmu_info_proc_show(struct seq_file *m, void *v)
^~~~~~~~~~~~~~~~~~
Add some #ifdefs to avoid unused code warnings when CONFIG_PROC_FS is
disabled.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0c11c0770fc4ec7e80a4b2e0ffce1055b792cfdb.1647854880.git.fthain@linux-m68k.org
Haowen Bai [Thu, 17 Mar 2022 09:24:49 +0000 (17:24 +0800)]
macintosh/macio-adb: Fix warning comparing pointer to 0
Avoid pointer type value compared with 0 to make code clear.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1647509089-4280-1-git-send-email-baihaowen@meizu.com
Haowen Bai [Thu, 17 Mar 2022 02:57:02 +0000 (10:57 +0800)]
macintosh/windfarm_pm121: Fix warning comparing pointer to 0
Avoid pointer type value compared with 0 to make code clear.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1647485822-16717-1-git-send-email-baihaowen@meizu.com
Haowen Bai [Thu, 17 Mar 2022 02:42:33 +0000 (10:42 +0800)]
macintosh/windfarm_pm91: Fix warning comparing pointer to 0
Avoid pointer type value compared with 0 to make code clear.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1647484953-15249-1-git-send-email-baihaowen@meizu.com
Haowen Bai [Thu, 17 Mar 2022 02:35:54 +0000 (10:35 +0800)]
macintosh/adb: Fix warning comparing pointer to 0
Avoid pointer type value compared with 0 to make code clear.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1647484554-13258-1-git-send-email-baihaowen@meizu.com
Haowen Bai [Thu, 17 Mar 2022 02:32:39 +0000 (10:32 +0800)]
macintosh/windfarm_pm81: Fix warning comparing pointer to 0
Avoid pointer type value compared with 0 to make code clear.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1647484359-12402-1-git-send-email-baihaowen@meizu.com
Uwe Kleine-König [Fri, 18 Nov 2022 22:40:31 +0000 (23:40 +0100)]
macintosh/windfarm_smu_sat: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118224540.619276-298-uwe@kleine-koenig.org
Uwe Kleine-König [Fri, 18 Nov 2022 22:40:30 +0000 (23:40 +0100)]
macintosh/windfarm_max6690_sensor: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118224540.619276-297-uwe@kleine-koenig.org
Uwe Kleine-König [Fri, 18 Nov 2022 22:40:29 +0000 (23:40 +0100)]
macintosh/windfarm_lm87_sensor: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118224540.619276-296-uwe@kleine-koenig.org
Uwe Kleine-König [Fri, 18 Nov 2022 22:40:28 +0000 (23:40 +0100)]
macintosh/windfarm_lm75_sensor: Convert to i2c's .probe_new()
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118224540.619276-295-uwe@kleine-koenig.org